Oxygen reduction to hydrogen peroxide on Fe3O4 nanoparticles supported on Printex carbon and Graphene

Electrocatalysts for the Formation of Hydrogen Peroxide by Oxygen Reduction Reaction

Hydrogen peroxide (H2O2) is a widely used strong oxidant, and its traditional preparation methods, anthraquinone method, and direct synthesis method, have many drawbacks. The method of producing H2O2 by two-electron oxygen reduction reaction (2e- ORR) is considered an alternative strategy for the traditional anthraquinone method due to its high efficiency, energy saving, and environmental friendliness, but it remains a big challenge. In this review, we have described the mechanism of ORR and the principle of electrocatalytic performance testing, and have summarized the standard performance evaluation techniques for electrocatalysts to produce H2O2. Secondly, according to the theoretical calculation and experimental results, several kinds of efficient electrocatalysts are introduced. It is concluded that noble metal-based materials, carbon-based materials, non-noble metal composites, and single-atom catalysts are the preferred catalyst materials for the preparation of H2O2 by 2e- ORR. Finally, the advantages and novelty of 2e- ORR compared with traditional methods for H2O2 production, as well as the advantages and disadvantages of the above-mentioned high-efficiency catalysts, are summarized. The application prospect and development direction of high-efficiency catalysts for H2O2 production by 2e- ORR has been prospected, which is of great significance for promoting the electrochemical yield of H2O2 and developing green chemical production.

Fe3O4 encapsulated in hierarchically porous nitrogen-doped graphitic carbon layers for efficient oxygen reduction reaction: Enhanced intrinsic activity via directional interfacial charge transfer

Constructing efficient electrocatalysts for the oxygen reduction reaction (ORR) is crucial for the commercialization of metal-air batteries. Iron oxide-based catalysts exhibit promising potential for ORR. However, addressing the issue of inferior catalytic performance is essential, and a comprehensive understanding of the catalytic mechanism of iron oxide-based catalysts is also lacking. In this study, we present Fe3O4 nanoparticles encapsulated in N-doped graphitic carbon layers (NGC) hosted by hierarchically porous carbon (Fe3O4@NGC), achieved through a facile dual melt-salt template strategy. The encapsulation of Fe3O4 nanoparticles protects them from corrosion and exfoliation, endowing the catalysts with superior stability. Density functional theory (DFT) calculations discover that the electronic interaction between Fe3O4 nanoparticles and N-doped graphitic carbon layers induces directional interfacial electron transfer, which effectively modulates the surface electronic structure to improve the binding ability to O2, weaken the OO bond, and optimize the adsorption of intermediates, thus boosting the intrinsic activity. DFT unveils that the C atoms nearest to graphitic-N in NGC are active sites. Finally, the synergistic effects of Fe3O4 nanoparticles and NGC result in outstanding ORR performance and superior stability and methanol tolerance of Fe3O4@NGC, with a half-wave potential of 0.89 V, surpassing that of Pt/C by 50 mV. Fe3O4@NGC also shows better performance than Pt/C when used as the air-electrode catalyst in zinc-air battery.

Polymerizable Ionic Liquid-Derived N, S co-Doped sp3/sp2 Carbon as Electrocatalyst for H2O2 Generation

The H2O2 generation via the green electrochemical process is of high interest. For the H2O2 electrochemical generation, the oxygen reduction reaction (ORR) is important. Unfortunately, the ORR is kinetically sluggish and catalysts are needed. However, noble metal ORR catalysts are pricy and scarcely applicable in applications. Therefore, non-precious metal catalysts are desired. Heteroatom-doped carbons show promise as metal-free ORR catalysts. The ORR catalytic activity will be enhanced by the carbon's sp2 and/or sp3 engineering. For N, S co-Cdoped and sp2/sp3 modulated carbon, a polymerizable ionic liquid of hydrolyzed vinyl imidazolium was studied. The carbon is studied as a metal-free catalyst for the ORR via the 2e- process. It is possible to get an onset potential of 0.88 V vs. RHE with approximately 50 % selectivity for the H2O2. The current study offers a simple technique for synthesizing heteroatom-doped sp2/sp3 designed carbon as catalysts for the electroreduction of O2 to produce H2O2, and a new way of tunning the sp3/sp2 carbon catalytic activity by modulating the ionic liquid.

Design and synthesis of hierarchical MnO-Fe3O4@C/expanded graphite composite for sensitive electrochemical detection of bisphenol A

Hierarchically nanostructured binary transition metal oxide-based materials with high conductivity and catalytic activity are quite attractive for the electrochemical quantitative detection of environmental pollutants due to their natural abundance, variable oxidation state, and excellent synergies between metal sites. Herein, a new hierarchical MnO-Fe3O4@C/expanded graphite (EG) composite is designed and synthesized through a simple and in situ annealing method with the utilization of bimetallic organic framework (FeMn-MOF)/EG precursor. The synthesized MnO-Fe3O4@C/EG composite possesses a unique hierarchical nanoarchitecture that small-sized bimetallic oxide nanoparticles of 10-40 nm completely encapsulated by amorphous carbon layers of 2-4 nm are uniformly distributed on the EG platform. This distinctive structure combines the advantages of high conductivity, excellent catalytic activity, and strong stability. Resultantly, when it is applied to monitor environmental endocrine disruptors, the sensor exhibits a significant catalytic effect on the electrochemical oxidation of bisphenol A (BPA), inducing an amplified response current. In addition, the sensor shows a wide linear range of 1-50 μM and 50-400 μM for the BPA monitor, giving a sensitivity of 5208.8 and 1641.9 μA mM-1 cm-2, respectively. This study offers a new approach to design hierarchical binary metal oxide-based sensing materials as well as to explore their electrochemical properties and applications for the determination of emerging contaminants.

Sn Bulk Phase Doping and Surface Modification on Ti4 O7 for Oxygen Reduction to Hydrogen Peroxide

Developing stable and highly selective two-electron oxygen reduction reaction (2e- ORR) electrocatalysts for producing hydrogen peroxide (H2 O2 ) is considered a major challenge to replace the anthraquinone process and achieve a sustainable green economy. Here, we doped Sn into Ti4 O7 (D-Sn-Ti4 O7 ) by simple polymerization post-calcination method as a high-efficiency 2e- ORR electrocatalyst. In addition, we also applied plain calcination after the grinding method to load Sn on Ti4 O7 (L-Sn-Ti4 O7 ) as a comparison. However, the performance of L-Sn-Ti4 O7 is far inferior to that of the D-Sn-Ti4 O7 . D-Sn-Ti4 O7 exhibits a starting potential of 0.769 V (versus the reversible hydrogen electrode, RHE) and a high H2 O2 selectivity of 95.7 %. Excitingly, the catalyst can maintain a stable current density of 2.43 mA ⋅ cm-2 for 3600 s in our self-made H-type cell, and the cumulative H2 O2 production reaches 359.2 mg ⋅ L-1 within 50,000 s at 0.3 V. The performance of D-Sn-Ti4 O7 is better than that of the non-noble metal 2e- ORR catalysts reported so far. The doping of Sn not only improves the conductivity but also leads to the lattice distortion of Ti4 O7 , further forming more oxygen vacancies and Ti3+ , which greatly improves its 2e- ORR performance compared with the original Ti4 O7 . In contrast, since the Sn on the surface of L-Sn-Ti4 O7 displays a synergistic effect with Tin+ (3≤n≤4) of Ti4 O7 , the active center Tin+ dissociates the O=O bond, making it more inclined to 4e- ORR.

Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)

Hydrogen peroxide (H2O2) is a valuable green oxidant with a wide range of applications. Furthermore, it is recognized as a possible future energy carrier achieving safe operation, storage and transportation. The photochemical production of H2O2 serves as a promising alternative to the waste- and energy-intensive anthraquinone process. Following the 12 principles of Green Chemistry, we demonstrate a facile and general approach to sustainable catalyst development utilizing earth-abundant iron and biobased sources only. We developed several iron oxide (FeOx) nanoparticles (NPs) for successful photochemical oxygen reduction to H2O2 under visible light illumination (445 nm). Achieving a selectivity for H2O2 of >99%, the catalyst material could be recycled for up to four consecutive rounds. An apparent quantum yield (AQY) of 0.11% was achieved for the photochemical oxygen reduction to H2O2 with visible light (445 nm) at ambient temperatures and pressures (9.4-14.8 mmol g-1 L-1). Reaching productivities of H2O2 of at least 1.7 ± 0.3 mmol g-1 L-1 h-1, production of H2O2 was further possible via sunlight irradiation and in seawater. Finally, a detailed mechanism has been proposed on the basis of experimental investigation of the catalyst's properties and computational results.

Enhancement of excess sludge dewatering by three-dimensional electro-Fenton process based on sludge biochar

Deep dewatering of waste activated sludge (WAS) is still a challenge due to high content of bound water and non-Newton fluid properties of sludge flocs. Electro-Fenton (EF) can enhance sludge dewaterability, however, low pH needed in homogeneous EF and fine flocs after EF conditioning influenced deep dewatering of sludge and the subsequent resource recovery disposal. In this study, a three dimension electro-Fenton (3D-EF) using Fe modified sludge biochar (Fe@SBC) as particle electrode, heterogeneous Fenton catalyst and skeleton builder for deep dewatering of sludge under neutral pH was proposed. Fe@SBC obtained at 800 °C exhibited high capacity of H₂O₂ electrogeneration and activation due to high conductivity and content of 2e-ORR selectivity functional groups. With promoted generation of H₂O₂ and hydroxyl radical (•OH), 3D-EF with Fe@SBC showed higher decomposition of bound extracellular polymeric substances (EPS) and disintegration of cells in sludge flocs, resulting in releasing bound and intracellular water into free water. Compared with EF, 3D-EF with Fe@SBC800 had higher ability in breaking macromolecules of protein and polysaccharide, as well as removing -COOH and -NH₂ groups in EPS, which could facilitate release of bound water trapped in EPS and self-coagulation of fine flocs. During subsequent filtering process, Fe@SBC could enhance sludge filterability as skeleton builder. A synergetic effect of strong oxidation and physical conditioning were proposed in 3D-EF sludge dewaterability with Fe@SBC, and the improved oxidation by Fe@SBC was supposed to play the major role.

Decontamination of wastewater containing contaminants of emerging concern by electrooxidation and Fenton-based processes - A review on the relevance of materials and methods

In recent years, there has been an increasingly growing interest regarding the use of electrochemical advanced oxidation processes (EAOPs) which are considered highly promising alternative treatment techniques for addressing environmental issues related to pollutants of emerging concern. In EAOPs, electrogenerated oxidizing agents, such as hydroxyl radical (HO^•), can react non-selectively with a wide range of organic compounds, degrading and mineralizing their structures to unharmful molecules like CO₂, H₂O, and inorganic ions. To this date, a broad spectrum of advanced electrocatalysts have been developed and applied for the treatment of compounds of interest in different matrices, specifically aiming at enhancing the degradation performance. New combined methods have also been employed as alternative treatment techniques targeted at circumventing the major obstacles encountered in Fenton-based processes, such as high costs and energy consumption, which still contribute significantly toward inhibiting the large-scale application of these processes. First, some fundamental aspects of EAOPs will be presented. Further, we will provide an overview of electrode materials which have been recently developed and reported in the literature, highlighting different anode and cathode structures employed in EAOPs, their main advantages and disadvantages, as well as their contribution to the performance of the treatment processes. The influence of operating parameters, such as initial concentrations, pH effect, temperature, supporting electrolyte, and radiation source, on the treatment processes were also studied. Finally, hybrid techniques which have been reported in the literature and critically assess the most recent techniques used for evaluating the degradation efficiency of the treatment processes.

Electrochemical Synthesis of Hydrogen Peroxide Catalyzed by Carbon Nanotubes with Surface Co-NX Sites and Encapsulated Co Nanoparticles

The exploitation of M-N_X sites, where M is a transition metal atom, is widely regarded as an effective catalytic strategy to promote the oxygen reduction reaction (ORR). In addition, some studies have shown that transition metal nanoparticles (M-NPs) coated with carbon layers can improve the reactivity of ORR and ameliorate the overpotential of the reaction. In this study, we synthesized carbon nanotubes with single-atom Co-N_X active sites, Co-NPs outside the tube, and Co-NPs wrapped in the tube by the complexation-pyrolysis synthesis method and explored the role of the particles and Co-N_X sites through different pickling steps. The catalyst synthesized with the new stratagem in this study shows outstanding selectivity and also ORR activity. Furthermore, a natural air diffusion electrode fabricated using this material can produce H₂O₂ at 323 mg L^-1 h^-1 under neutral conditions without oxygen aeration.

Electrosynthesis of H2O2 through a two-electron oxygen reduction reaction by carbon based catalysts: From mechanism, catalyst design to electrode fabrication

Hydrogen peroxide (H2O2) is an efficient oxidant with multiple uses ranging from chemical synthesis to wastewater treatment. The in-situ H2O2 production via a two-electron oxygen reduction reaction (ORR) will bring H2O2 beyond its current applications. The development of carbon materials offers the hope for obtaining inexpensive and high-performance alternatives to substitute noble-metal catalysts in order to provide a full and comprehensive picture of the current state of the art treatments and inspire new research in this area. Herein, the most up-to-date findings in theoretical predictions, synthetic methodologies, and experimental investigations of carbon-based catalysts are systematically summarized. Various electrode fabrication and modification methods were also introduced and compared, along with our original research on the air-breathing cathode and three-phase interface theory inside a porous electrode. In addition, our current understanding of the challenges, future directions, and suggestions on the carbon-based catalyst designs and electrode fabrication are highlighted.

Highly efficient and selective electrocatalytic hydrogen peroxide production on Co-O-C active centers on graphene oxide

Electrochemical oxygen reduction provides an eco-friendly synthetic route to hydrogen peroxide (H2O2), a widely used green chemical. However, the kinetically sluggish and low-selectivity oxygen reduction reaction (ORR) is a key challenge to electrochemical production of H2O2 for practical applications. Herein, we demonstrate that single cobalt atoms anchored on oxygen functionalized graphene oxide form Co-O-C@GO active centres (abbreviated as Co1@GO for simplicity) that act as an efficient and durable electrocatalyst for H2O2 production. This Co1@GO electrocatalyst shows excellent electrochemical performance in O2-saturated 0.1 M KOH, exhibiting high reactivity with an onset potential of 0.91 V and H2O2 production of 1.0 mg cm-2 h-1 while affording high selectivity of 81.4% for H2O2. Our combined experimental observations and theoretical calculations indicate that the high reactivity and selectivity of Co1@GO for H2O2 electrogeneration arises from a synergistic effect between the O-bonded single Co atoms and adjacent oxygen functional groups (C-O bonds) of the GO present in the Co-O-C active centres.

Improving the Treatment Efficiency and Lowering the Operating Costs of Electrochemical Advanced Oxidation Processes

Electrochemical advanced oxidation processes (EAOP®) are promising technologies for the decentralized treatment of water and will be important elements in achieving a circular economy. To overcome the drawback of the high operational expenses of EAOP® systems, two novel reactors based on a next-generation boron-doped diamond (BDD) anode and a stainless steel cathode or a hydrogen-peroxide-generating gas diffusion electrode (GDE) are presented. This reactor design ensures the long-term stability of BDD anodes. The application potential of the novel reactors is evaluated with artificial wastewater containing phenol (COD of 2000 mg L−1); the reactors are compared to each other and to ozone and peroxone systems. The investigations show that the BDD anode can be optimized for a service life of up to 18 years, reducing the costs for EAOP® significantly. The process comparison shows a degradation efficiency for the BDD–GDE system of up to 135% in comparison to the BDD–stainless steel electrode combination, showing only 75%, 14%, and 8% of the energy consumption of the BDD–stainless steel, ozonation, and peroxonation systems, respectively. Treatment efficiencies of nearly 100% are achieved with both novel electrolysis reactors. Due to the current density adaptation and the GDE integration, which result in energy savings as well as the improvements that significantly extend the lifetime of the BDD electrode, less resources and raw materials are consumed for the power generation and electrode manufacturing processes.

Recent Progress of Electrochemical Production of Hydrogen Peroxide by Two-Electron Oxygen Reduction Reaction

Shifting electrochemical oxygen reduction reaction (ORR) via two-electron pathway becomes increasingly crucial as an alternative/green method for hydrogen peroxide (H2 O2 ) generation. Here, the development of 2e- ORR catalysts in recent years is reviewed, in aspects of reaction mechanism exploration, types of high-performance catalysts, factors to influence catalytic performance, and potential applications of 2e- ORR. Based on the previous theoretical and experimental studies, the underlying 2e- ORR catalytic mechanism is firstly unveiled, in aspect of reaction pathway, thermodynamic free energy diagram, limiting potential, and volcano plots. Then, various types of efficient catalysts for producing H2 O2 via 2e- ORR pathway are summarized. Additionally, the catalytic active sites and factors to influence catalysts' performance, such as electronic structure, carbon defect, functional groups (O, N, B, S, F etc.), synergistic effect, and others (pH, pore structure, steric hindrance effect, etc.) are discussed. The H2 O2 electrogeneration via 2e- ORR also has various potential applications in wastewater treatment, disinfection, organics degradation, and energy storage. Finally, potential future directions and prospects in 2e- ORR catalysts for electrochemically producing H2 O2 are examined. These insights may help develop highly active/selective 2e- ORR catalysts and shape the potential application of this electrochemical H2 O2 producing method.

High-performance single-atom Ni catalyst loaded graphyne for H2O2 green synthesis in aqueous media

The electrochemical synthesis of hydrogen peroxide (H₂O₂) provides a greener and more efficient method compared with classic catalysts containing toxic metals. Herein, we used first-principles density functional theory (DFT) calculations to investigate 174 different single-atom catalysts with graphyne substrates, and conducted a three-step screening strategy to identify the optimal noble metal-free single atom catalyst. It is found that a single Ni atom loaded on γ-graphyne with carbon vacancies (Ni@V-γ-GY) displayed remarkable thermodynamic stability, excellent selectivity, and high activity with an ultralow overpotential of 0.03 V. Furthermore, based on ab-initio molecular dynamic and DFT calculations under the H₂O solvent, it was revealed that the catalytic performance for H₂O₂ synthesis in aqueous phase was much better than that in gas phase condition, shedding light on the hydrogen bond network being beneficial to accelerate the transfer of protons for H₂O₂ synthesis.

Design Strategies of Non-Noble Metal-Based Electrocatalysts for Two-Electron Oxygen Reduction to Hydrogen Peroxide

Hydrogen peroxide (H₂ O₂ ) is a highly value-added and environmentally friendly chemical with various applications. The production of H₂ O₂ by electrocatalytic 2e^- oxygen reduction reaction (ORR) has drawn considerable research attention, with a view to replacing the currently established anthraquinone process. Electrocatalysts with low cost, high activity, high selectivity, and superior stability are in high demand to realize precise control over electrochemical H₂ O₂ synthesis by 2e^- ORR and the feasible commercialization of this system. This Review introduces a comprehensive overview of non-noble metal-based catalysts for electrochemical oxygen reduction to afford H₂ O₂ , providing an insight into catalyst design and corresponding reaction mechanisms. It starts with an in-depth discussion on the origins of 2e^- /4e^- selectivity towards ORR for catalysts. Recent advances in design strategies for non-noble metal-based catalysts, including carbon nanomaterials and transition metal-based materials, for electrochemical oxygen reduction to H₂ O₂ are then discussed, with an emphasis on the effects of electronic structure, nanostructure, and surface properties on catalytic performance. Finally, future challenges and opportunities are proposed for the further development of H₂ O₂ electrogeneration through 2e^- ORR, from the standpoints of mechanistic studies and practical application.

3d Transition-Metal-Mediated Columbite Nanocatalysts for Decentralized Electrosynthesis of Hydrogen Peroxide

Decentralized electrosynthesis of hydrogen peroxide (H₂ O₂ ) via oxygen reduction reaction (ORR) can enable applications in disinfection control, pulping and textile bleaching, wastewater treatment, and renewable energy storage. Transition metal oxides are usually not efficient catalysts because they are more selective to produce H₂ O. Here, it is shown that divalent 3d transition metal cations (Mn, Fe, Co, Ni, and Cu) can control the catalytic activity and selectivity of columbite nanoparticles. They are synthesized using polyoxoniobate (K₇ HNb₆ O₁₉ ·13H₂ O) and divalent metal cations by a hydrothermal method. The optimal NiNb₂ O₆ holds an H₂ O₂ selectivity of 96% with the corresponding H₂ O₂ Faradaic efficiency of 92% in a wide potential window from 0.2 to 0.6 V in alkaline electrolyte, superior to other transition metal oxide catalysts. Ex situ X-ray photoelectron and operando Fourier-transformed infrared spectroscopic studies, together with density functional theory calculations, reveal that 3d transition metals shift the d-band center of catalytically active surface Nb atoms and change their interactions with ORR intermediates. In an application demonstration, NiNb₂ O₆ delivers H₂ O₂ productivity up to 1 mol_H2O2 g_cat ^-1 h^-1 in an H-shaped electrolyzer and can yield catholytes containing 300 × 10^-3 m H₂ O₂ to efficiently decomposing several organic dyes. The low-cost 3d transition-metal-mediated columbite catalysts show excellent application potentials.

Efficient Electrochemical Oxygen Reduction to Hydrogen Peroxide by Transition Metal-Doped Silicate Sr0.7Na0.3SiO3-δ

Electrochemical oxygen reduction in a selective two-electron pathway is an efficient method for onsite production of H₂O₂. State of the art noble metal-based catalysts will be prohibitive for widespread applications, and hence earth-abundant oxide-based systems are most desired. Here we report transition metal (Mn, Fe, Ni, Cu)-doped silicates, Sr_0.7Na_0.3SiO_3-δ, as potential electrocatalysts for oxygen reduction to H₂O₂ in alkaline conditions. These novel compounds are isostructural with the parent Sr_0.7Na_0.3SiO_3-δ and crystallize in monoclinic structure with corner-shared SiO₄ groups forming cyclic trimers. The presence of Na stabilizes O vacancies created on doping, and the transition metal ions provide catalytically active sites. Electrochemical parameters estimated from Tafel and Koutechy-Levich plots suggest a two-electron transfer mechanism, indicating peroxide formation. This is confirmed by the rotating ring disc electrode method, and peroxide selectivity and Faradaic efficiency are calculated to be in the range of 65-82% and 50-68%, respectively, in a potential window 0.3 to 0.6 V (vs RHE). Of all the dopants, Ni imparts the maximum selectivity and efficiency as well as highest rate of formation of H₂O₂ at 1.65 μmol s^-1.

Transition Metal and Nitrogen Co-Doped Carbon-based Electrocatalysts for the Oxygen Reduction Reaction: From Active Site Insights to the Rational Design of Precursors and Structures

Considering the urgent requirement for clean and sustainable energy, fuel cells and metal-air batteries have emerged as promising energy storage and conversion devices to alleviate the worldwide energy challenges. The key step in accelerating the sluggish oxygen reduction reaction (ORR) kinetics at the cathode is to develop cost-effective and high-efficiency non-precious metal catalysts, which can be used to replace expensive Pt-based catalysts. Recently, the transition metal and nitrogen co-doped carbon (M-N_x /C) materials with tailored morphology, tunable composition, and confined structure show great potential in both acidic and alkaline media. Herein, the mechanism of ORR is provided, followed by recent efforts to clarify the actual structures of active sites. Furthermore, the progress of optimizing the catalytic performance of M-N_x /C catalysts by modulating nitrogen-rich precursors and porous structure engineering is highlighted. The remaining challenges and development prospects of M-N_x /C catalysts are also outlined and evaluated.

Electrocatalytic H2O2 production via two-electron O2 reduction by Mo-doped TiO2 nanocrystallines

Mo acts as an effective dopant to boost the catalytic activity of TiO2 for the 2e− O2 reduction reaction. Such Mo–TiO2 electrocatalyst achieves a high Faradaic efficiency of 92% and a large H2O2 yield of 395.3 mmol gcat−1 h−1 in alkaline medium.

Revealing Kinetics of Two-Electron Oxygen Reduction Reaction at Single-Molecule Level

By combining single-molecule fluorescence microscopy with traditional electrochemical methods, herein we report on the investigation of the electrocatalytic kinetics of two-electron (2e) pathway of oxygen reduction reaction (ORR) on a single Fe₃O₄ nanoparticle. The kinetic parameters for two-electron ORR process are successfully derived at the single-particle level, and a potential dependence of dynamic heterogeneity among individual nanoparticles is revealed. Furthermore, the performance stability of individual Fe₃O₄ nanoparticles for 2e ORR process is studied. This study deepens our understanding to the electrocatalytic ORR process, especially the 2e pathway at single-molecule and single-particle levels.

Single-Atom Cobalt Catalysts for Electrocatalytic Hydrodechlorination and Oxygen Reduction Reaction for the Degradation of Chlorinated Organic Compounds

Electrochemical reduction-oxidation processes with the aid of cathode catalysts are promising technologies for the decomposition of organic compounds. High-efficiency and low-cost catalysts for electrochemical reductive dechlorination and two-electron oxygen reduction reaction (ORR) are vital to the overall degradation of chlorinated organic compounds. This study reports electrochemical dechlorination using a single-atom Co-loaded sulfide graphene (Co-SG) catalyst via atomic hydrogen generated from the electrochemical reduction of H₂O and electrolysis of hydrogen. The Co-SG electrocatalyst exhibited a remarkable performance for H₂O₂ synthesis with a half-wave potential of 0.70 V (vs RHE) and selectivity over 90%. The high electrochemical performance was achieved for bifunctional electrocatalysis with regard to the smaller overpotentials, faster kinetics, and higher cycling stability compared to the noble metal-based electrocatalysts. In this study, 2,4-dichlorobenzoic acid was well degraded and the TOC concentration was effectively reduced. This work introduces the preparation of a new active site for high-performance single-atom catalysts and also promotes its application in the electrochemical degradation of chlorinated organic pollutants.

Recent Developments for Aluminum–Air Batteries

Abstract

Environmental concerns such as climate change due to rapid population growth are becoming increasingly serious and require amelioration. One solution is to create large capacity batteries that can be applied in electricity-based applications to lessen dependence on petroleum. Here, aluminum–air batteries are considered to be promising for next-generation energy storage applications due to a high theoretical energy density of 8.1 kWh kg−1 that is significantly larger than that of the current lithium-ion batteries. Based on this, this review will present the fundamentals and challenges involved in the fabrication of aluminum–air batteries in terms of individual components, including aluminum anodes, electrolytes and air cathodes. In addition, this review will discuss the possibility of creating rechargeable aluminum–air batteries.

Graphic Abstract

2 D Hybrid of Ni-LDH Chips on Carbon Nanosheets as Cathode of Zinc-Air Battery for Electrocatalytic Conversion of O2 into H2 O2

It remains great challenge to develop precious-metal-free electrocatalysts to implement high-activity electrochemical conversion of O₂ into value-added hydroperoxide species (HO₂ ^- ), which are vulnerable when exposed to various transition-metal-based catalysts. A strategy based on steric hindrance and layered nickel-based layered double hydroxide (Ni-LDH) induction has been developed for one-pot inlaying high-density ultrathin 2 D Ni-LDH chips on in situ-grown carbon nanosheets (Ni-LDH C/CNSs). The resulting material exhibits high electrocatalytic selectivity with a faradaic efficiency up to 95 % for oxygen reduction into peroxide and attains a fairly high mass activity of approximately 22.2 A g^-1 , outperforming most metal-based catalysts reported previously. Systematic studies demonstrate that the greatly increased defect concentration at Ni edge sites of Ni-LDH chips results in more active sites, which contributes a favorable thermodynamically neutral adsorption of OOH* and adsorbed H₂ O₂ molecules relatively weakly. Additionally, the modified CNSs effectively suppress H₂ O₂ decomposition and avoid O-O bond cleavage to produce H₂ O by steric effects. The synergistic effect of CNSs and Ni-LDH chips therefore leads to high activity and high selectivity in a two-electron pathway. A proof-of-concept zinc-air fuel cell is proposed and set up to demonstrate the feasibility of green synthesis of peroxide, generating an impressive H₂ O₂ production rate of 5239.67 mmol h^-1  g_cat. ^-1 .

Carbon-based dots for the electrochemical production of hydrogen peroxide

Graphene/carbon-based dot nanohybrids were prepared by the ultrasonic exfoliation of natural graphite in the presence of single-layer carbon based dots, and used for the electrochemical production of hydrogen peroxide.

Core-Shell Fe3O4@NCS-Mn Derived from Chitosan-Schiff Based Mn Complex with Enhanced Catalytic Activity for Oxygen Reduction Reaction

A core-shell type of Fe3O4/NCS-Mn composite was prepared by pyrolyzing a precursor fabricated by coating a chitosan-Schiff base Mn complex on Fe3O4 cores. For comparison purposes, the Fe3O4@NCS sample in the absence of Mn and the Fe3O4@NC sample derived from just chitosan coating Fe3O4 were also prepared. Among the three catalysts, Fe3O4@NCS-Mn demonstrates the best electrocatalytic activity compared to commercial Pt/C (20%) for oxygen reduction reaction (ORR). The average of the transferred electron number (n) approached 3.6 in the range of −0.3 to −0.8 V (vs. Ag/AgCl). Moreover, the catalyst exhibited high stability and durability against methanol and may potentially be a promising ORR catalyst for fuel cells.

Electrosynthesis of Hydrogen Peroxide Synergistically Catalyzed by Atomic Co-Nx -C Sites and Oxygen Functional Groups in Noble-Metal-Free Electrocatalysts

Hydrogen peroxide (H₂ O₂ ) is a green oxidizer widely involved in a vast number of chemical reactions. Electrochemical reduction of oxygen to H₂ O₂ constitutes an environmentally friendly synthetic route. However, the oxygen reduction reaction (ORR) is kinetically sluggish and undesired water serves as the main product on most electrocatalysts. Therefore, electrocatalysts with high reactivity and selectivity are highly required for H₂ O₂ electrosynthesis. In this work, a synergistic strategy is proposed for the preparation of H₂ O₂ electrocatalysts with high ORR reactivity and high H₂ O₂ selectivity. A Co-N_x -C site and oxygen functional group comodified carbon-based electrocatalyst (named as Co-POC-O) is synthesized. The Co-POC-O electrocatalyst exhibits excellent catalytic performance for H₂ O₂ electrosynthesis in O₂ -saturated 0.10 m KOH with a high selectivity over 80% as well as very high reactivity with an ORR potential at 1 mA cm^-2 of 0.79 V versus the reversible hydrogen electrode (RHE). Further mechanism study identifies that the Co-N_x -C sites and oxygen functional groups contribute to the reactivity and selectivity for H₂ O₂ electrogeneration, respectively. This work affords not only an emerging strategy to design H₂ O₂ electrosynthesis catalysts with remarkable performance, but also the principles of rational combination of multiple active sites for green and sustainable synthesis of chemicals through electrochemical processes.

Hydrogen peroxide generation from O2 electroreduction for environmental remediation: A state-of-the-art review

The electrochemical production of hydrogen peroxide (H2O2) by 2-electron oxygen reduction reaction (ORR) is an attractive alternative to the present complex anthraquinone process. The objective of this paper is to provide a state-of-the-arts review of the most important aspects of this process. First, recent advances in H2O2 production are reviewed and the advantages of H2O2 electrogeneration via 2-electron ORR are highlighted. Second, the selectivity of the ORR pathway towards H2O2 formation as well as the development process of H2O2 production are presented. The cathode characteristics are the decisive factors of H2O2 production. Thus the focus is shifted to the introduction of commonly used carbon cathodes and their modification methods, including the introduction of other active carbon materials, hetero-atoms doping (i.e., O, N, F, B, and P) and decoration with metal oxides. Cathode stability is evaluated due to its significance for long-term application. Effects of various operational parameters, such as electrode potential/current density, supporting electrolyte, electrolyte pH, temperature, dissolved oxygen, and current mode on H2O2 production are then discussed. Additionally, the environmental application of electrogenerated H2O2 on aqueous and gaseous contaminants removal, including dyes, pesticides, herbicides, phenolic compounds, drugs, VOCs, SO2, NO, and Hg0, are described. Finally, a brief conclusion about the recent progress achieved in H2O2 electrogeneration via 2-electron ORR and an outlook on future research challenges are proposed.

LiFePO₄-Graphene Composites as High-Performance Cathodes for Lithium-Ion Batteries: The Impact of Size and Morphology of Graphene

In this work, we investigated three types of graphene (i.e., home-made G, G V4, and G V20) with different size and morphology, as additives to a lithium iron phosphate (LFP) cathode for the lithium-ion battery. Both the LFP and the two types of graphene (G V4 and G V20) were sourced from industrial, large-volume manufacturers, enabling cathode production at low cost. The use of wrinkled and/or large pieces of a graphene matrix shows promising electrochemical performance when used as an additive to the LFP, which indicates that the features of large and curved graphene pieces enable construction of a more effective conducting network to realize the full potential of the active materials. Specifically, compared to pristine LFP, the LFP/G, LFP/G V20, and LFP/G V4 show up to a 9.2%, 6.9%, and 4.6% increase, respectively, in a capacity at 1 C. Furthermore, the LFP combined with graphene exhibits a better rate performance than tested with two different charge/discharge modes. Moreover, from the economic and electrochemical performance view point, we also demonstrated that 1% of graphene content is optimized no matter the capacity calculated, based on the LFP/graphene composite or pure LFP.

A COOH-terminated nitrogen-doped carbon aerogel as a bulk electrode for completely selective two-electron oxygen reduction to H2O2

A COOH-terminated nitrogen-doped carbon aerogel exhibited 100% selectivity to two-electron oxygen reduction, exceeding reported carbonaceous and noble metal catalysts. The optimal electrode with the synergistic effect of C-N/C-COOH resulted in a minimum ηO2/H2O2 and gave an evolution rate of 60 mg L-1 g-1 h-1 for H2O2 with satisfactory mechanical and electrochemical stability for practical applications.

Structure, Activity, and Faradaic Efficiency of Nitrogen-Doped Porous Carbon Catalysts for Direct Electrochemical Hydrogen Peroxide Production

Carbon materials doped with nitrogen are active catalysts for the electrochemical two-electron oxygen reduction reaction (ORR) to hydrogen peroxide. Insights into the individual role of the various chemical nitrogen functionalities in the H₂ O₂ production, however, have remained scarce. Here, we explore a catalytically very active family of nitrogen-doped porous carbon materials, prepared by direct pyrolysis of ordered mesoporous carbon (CMK-3) with polyethylenimine (PEI). Voltammetric rotating ring-disk analysis in combination with chronoamperometric bulk electrolysis measurements in electrolysis cells demonstrate a pronounced effect of the applied potentials, current densities, and electrolyte pH on the H₂ O₂ selectivity and absolute production rates. H₂ O₂ selectivity up to 95.3 % was achieved in acidic environment, whereas the largest H₂ O₂ production rate of 570.1 mmol g^-1 _catalyst  h^-1 was observed in neutral solution. X-ray photoemission spectroscopy (XPS) analysis suggests a key mechanistic role of pyridinic-N in the catalytic process in acid, whereas graphitic-N groups appear to be catalytically active moieties in neutral and alkaline conditions. Our results contribute to the understanding and aid the rational design of efficient carbon-based H₂ O₂ production catalysts.

A microbial electro-fenton cell for removing carbamazepine in wastewater with electricity output

High electrical energy is required for the electro-Fenton process to remove pharmaceuticals and personal care products (PPCPs) in wastewater. The aim of this study was to develop a novel and more cost-effective process, specifically a microbial electro-Fenton cell (MeFC), for treating PPCPs in wastewater. Acetylene black was selected as the catalyst for H₂O₂ electrogeneration and Fe-Mn binary oxide for hydroxyl radical production. In addition to lowering energy needs, the MeFC produced a maximum power density of 112 ± 11 mW/m² with 1 g/L acetate as a representative substrate and 10 mg/L carbamazepine (CBZ) as a typical PPCP. Comparing with electro-Fenton process, the CBZ removal in the MeFC was 38% higher within 24 h operation (90% vs. 62%). Furthermore, the CBZ removal rate in the MeFC was 10-100 times faster than that in other biological treatment processes. Such enhanced degradation of CBZ in the MeFC was attributed to the synergistic reactions between radical oxidation of CBZ and biodegradation of degradative intermediates. The MeFC provides a promising method to remove PPCPs from wastewater coupling with efficient removal of other biodegradable organics.

Bifunctional Oxygen Reduction/Oxygen Evolution Activity of Mixed Fe/Co Oxide Nanoparticles with Variable Fe/Co Ratios Supported on Multiwalled Carbon Nanotubes

A facile strategy is reported for the synthesis of Fe/Co mixed metal oxide nanoparticles supported on, and embedded inside, high purity oxidized multiwalled carbon nanotubes (MWCNTs) of narrow diameter distribution as effective bifunctional catalysts able to reversibly drive the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR) in alkaline solutions. Variation of the Fe/Co ratio resulted in a pronounced trend in the bifunctional ORR/OER activity. Controlled synthesis and in-depth characterization enabled the identification of an optimal Fe/Co composition, which afforded a low OER/OER reversible overvoltage of only 0.831 V, taking the OER at 10 mA cm^-2 and the ORR at -1 mA cm^-2 . Importantly, the optimal catalyst with a Fe/Co ratio of 2:3 exhibited very promising long-term stability with no evident change in the potential for both the ORR and the OER after 400 charge/discharge (OER/ORR) cycles at 15 mA cm^-2 in 6 m KOH. Moreover, detailed investigation of the structure, size, and phase composition of the mixed Fe/Co oxide nanoparticles, as well as their localization (inside of or on the surface of the MWCNTs) revealed insight of the possible contribution of the individual catalyst components and their synergistic interaction in the catalysis.