Coal fly ash supported CoFe2O4 nanocomposites: Synergetic Fenton-like and photocatalytic degradation of methylene blue

Synthesis of X@DRHC (X=Co, Ni, Mn) catalyst from comprehensive utilization of waste rice husk and spent lithium-ion batteries for efficient peroxymonosulfate (PMS) activation

Highly efficient resource recycling and comprehensive utilization play a crucial role in achieving the goal of reducing resource wasting, environmental protection, and achieving goal of sustainable development. In this work, the two kinds waste resources of agricultural rice husk and metal ions (Co, Ni, and Mn) from spent lithium-ion batteries have been skillfully utilized to synthesize novel Fenton-like catalysts. Desiliconized rice husk carbon (DRHC) with rich pore structure and large specific surface area from rice husk has been prepared and used as scalable carrier, and dandelion-like nanoparticles cluster could be grown in situ on the surface of the carrier by using metal ions contained waste water. The designed catalysts (X@DRHC) as well as their preparation process were characterized in detail by SEM, TEM, BET, XRD and XPS, respectively. Meanwhile, their catalytic abilities were also studied by activating potassium peroxomonosulfate (PMS) to remove methylene blue (MB). The results indicate X@DRHC displays excellent degradation efficiency on MB with wide pH range and stable reusability, which is suitable for the degradation of various dyes. This work has realized the recycling and high-value utilization of waste resources from biomass and spent lithium-ion batteries, which not only creates an efficient way to dispose waste resources, but also shows high economic benefits in large-scale water treatment.

Green Organo-Photooxidative Method for the Degradation of Methylene Blue Dye

This study used an organophoto-oxidative material to degrade the toxic azo dye, methylene blue (MB), due to its hazardous effects on aquatic life and humans. MB is traditionally degraded using metal-based catalysts, resulting in high costs. Several organic acids were screened for organo-photooxidative applications against various azo dyes, and ascorbic acid (AA), also known as vitamin C, was found to be best for degradation due to its high photooxidative activity. It is an eco-friendly, edible, and efficient photooxidative material. A photocatalytic box has been developed for the study of organo-photooxidative activity. It was found that when AA was added, degradation efficiency increased from 42 to 95% within 240 min. Different characterization techniques, such as HPLC and GC-MS, were used after degradation for the structural elucidation of degraded products. DFT study was done for the investigation of the mechanistic study behind the degradation process. A statistical tool, RSM, was used for the optimization of parameters (concentration of dye, catalyst, and time). This study develops sustainable and effective solutions for wastewater treatment.

Zn-Doped MnCO3/CS Composite Photocatalyst for Visible-Light-Driven Decomposition of Organic Pollutants

Zn-doped MnCO3/carbon sphere (Zn-doped MnCO3/CS) composites were synthesized using a simple hydrothermal procedure. Among various samples (ZM-50, ZM-05, and ZMC-0), the ternary Zn-doped MnCO3/CS (ZMC-2) catalyst demonstrated excellent visible light-induced photocatalytic activity. This improvement comes from the Zn addition and the conductive CS, which facilitate electron movement and charge transport. The catalyst exhibited efficient degradation of methylene blue (MB) over a wide pH range, achieving a removal efficiency of 99.6% under visible light. Radical trapping experiments suggested that •OH and •O2- played essential roles in the mechanism of organic pollutant degradation. Moreover, the catalyst maintained good degradation performance after five cycles. This study offers valuable perspectives into the fabrication of carbon-based composites with promising photocatalytic activity.

Hyperbranched-Polyethylenimine-Functionalized Coal Fly Ash as an Adsorbent for the Removal of Hexavalent Chromium and Reuse as a Dye Photocatalyst

Coal fly ash (CFA) has been extensively researched as an adsorbent for heavy metals, but its application is limited by its low adsorption capacity. The modification of CFA with hyperbranched polymers results in improved adsorption capacities. Hyperbranched polyethylenimine (HPEI) is a hyperbranched polymer containing NH2 groups that can bind with heavy metal ions through complexation or electrostatic interactions. In this study, CFA-HPEI adsorbents with various HPEI loadings (1-5%) were prepared and evaluated for the removal of Cr(VI). The successful incorporation of HPEI onto CFA was confirmed using Fourier transform infrared, elemental analysis, and X-ray photoelectron spectroscopy (XPS). The 3% CFA-HPEI loaded adsorbent resulted in optimum results when the effect of pH and adsorbent dosage was studied. The pseudo-second-order kinetics model best described the adsorption kinetics at an initial concentration of 20 mg/L. The Freundlich adsorption isotherm model best fitted the equilibrium adsorption data with a maximum adsorption capacity of 85.93 mg/g. The Cr-loaded adsorbent was reused as a photocatalyst to degrade methylene blue (MB) in the presence of visible light. The loaded adsorbent degraded 98.9% of MB (5 mg/L) within 180 min and was accompanied by compounds with m/z of 173 and 234, corresponding to the intermediate degradation of Azure A. The XPS analysis confirmed the coexistence of Cr(III) and Cr(VI) on the surface of the adsorbent. In addition, the loaded adsorbent exhibited good stability following MB degradation with no structural changes observed. Thus, CFA-HPEI adsorbents can be utilized as low-cost adsorbents for the remediation of toxic Cr(VI) from water and wastewater. The Cr-loaded CFA-HPEI adsorbent can be effectively reused as a photocatalyst, thus reducing environmental pollution.

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Organic dye contamination of water is a contributing factor to environmental pollution and has a negative impact on aquatic ecology. In this study, unsupported NiO and kaolin-supported NiO composites were synthesized by a one-step wet impregnation-precipitation method through the precipitation of nickel hydroxide onto locally accessible, inexpensive, and easily treated kaolin surfaces by using sodium hydroxide as a precipitating agent. The product was calcined at 500 °C and used for the catalytic oxidative degradation of methylene blue (MB) dye in an aqueous solution. The morphology, structure, and interactions of the synthesized materials were explored by SEM, XRD, and FT-IR spectroscopy. The characterization results revealed the fabrication and the growth of NiO on the kaolin surface. To determine the catalytic oxidative degradation performance of the catalyst, many experiments have been performed using the MB dye as a model dye. The catalytic degradation tests confirmed the importance of NiO and the high catalytic activity of the synthesized NiO/kaolin composite toward MB dye degradation. The oxidative degradation results showed that the optimized precursor amount on the kaolin surface could efficiently enhance the removal of MB dye. The kinetic investigation of the catalytic degradation of MB dye fitted the pseudo-first-order kinetic model. High removal efficiency was observed after eight reuse cycles, proving the exceptional stability and reusability of the composite. The catalytic process also proceeded with a low activation energy of 30.5 kJ/mol. In conclusion, the kaolin-supported NiO composite was established to be a favorable catalyst to degrade a model dye (MB) from an aqueous solution in the presence of inexpensive and easily available NaOCl with a catalytic efficiency of the material higher than 99% of the 20.3 mg catalyst within 6 min with an apparent rate constant, kapp, higher than 0.44625 min-1, which is far better than that of the unsupported catalyst with a kapp of 0.0926 min-1 at 10 mg dose in 20 min.

LED-driven photo-Fenton process for micropollutant removal by nanostructured magnetite anchored in mesoporous silica

The presence of organic micropollutants in water bodies represents a threat to living organisms and ecosystems due to their toxicological effects and recalcitrance in conventional wastewater treatments. In this context, the application of heterogeneous photo-Fenton based on magnetite nanoparticles supported on mesoporous silica (SBA15) is proposed to carry out the non-specific degradation of the model compounds ibuprofen, carbamazepine, hormones, bisphenol A and the dye ProcionRed®. The operating conditions (i.e., pH, catalyst load and hydrogen peroxide concentration) were optimized by Response Surface Methodology (RSM). The paramagnetic properties of the nanocatalysts allowed their repeated use in sequential batch operations with catalyst losses below 1%. The feasibility of the process was demonstrated as removal rates above 90% after twelve accomplished after twelve consecutive cycles. In addition, the contributions of different reactive oxygen species, mainly •OH, were analyzed together with the formation of by-products, achieving total mineralization values of 15% on average.

Spectrophotometric thermodynamic analysis of methylene blue aggregation in water by chemometrics; what comes in the presence of different cyclodextrins?

Spectrophotometry has been utilized to characterize the thermodynamic/dynamic properties of self-aggregation of methylene blue (MB) in water, particularly while interacting with a modulator like different cyclodextrins (α-, β-, hydroxypropyl-β- (HP-β-), and γ-CDs). These systems comprise many interactions that make such chemical systems sophisticated. We developed a mathematical modeling-fitting analysis for the simultaneous quantitative analysis of thermodynamic parameters of chemical reactions, relying on the fitting algorithm. Through analyzing simulated photometric titration data, we demonstrate the simultaneous determination of thermodynamic parameters of the different guest/host interactions. This first has brought the need for the calculation of the visible-light absorption spectrum and the thermodynamic parameters for the pure dimerization system. Therefore, the multiwavelength spectral-mole ratio data of aqueous solutions of MB over a concentration range of 2.5 × 10-5 to 4.5 × 10-5 M while temperature is changing; or being titrated with CDs solutions at various temperatures were collected, augmented, and then have been fed to solid mathematical routines to determine the potential existence of dimeric aggregates. The results of thermodynamics indicated that the positions of the monomer/dimer equilibria do not alter by the presence of α-CD. The apparent dimerization was suppressed upon addition of β- or HP-β-CDs, while the addition of γ-CD enhanced the dimerization.

g-C3N4/graphene oxide/SnFe2O4 ternary composite for the effective sunlight-driven photocatalytic degradation of methylene blue

A broadly used dye, methylene blue (MB), adversely impacts human health and water resources, which triggers efficient methods for its elimination. Semiconductor-based heterogeneous photocatalysis is an environmentally friendly approach that effectively degrades organic pollutants. The purpose of the current work is to elucidate and validate the application of a promising g-C3N4/GO/SnFe2O4 (CGS) composite for the environmental remediation of methylene blue dye. The ternary CGS composite has been synthesized using a solvothermal approach. The fabricated composites were analyzed through FTIR, XRD, SEM/EDX, UV-VIS spectroscopy, TEM, and XPS. The photoactivity of composites and affecting parameters (pH, H2O2 dosage, composite amount, initial dye concentration, and irradiation time) were observed in sunlight illumination. The optimal conditions for photocatalytic degradation were pH = 5, photocatalyst dosage = 30 mg/100 mL, H2O2 dosage = 6 mM, and initial dye concentration (IDC) of 10 ppm employing ternary CGS composite, and MB dye was degraded effectively within 1 h. Ninety-eight percent degradation efficacy was attained by employing ternary CGS composite under the optimized conditions. Scavenging analysis suggested that •OH radicals were the key reactive oxygen species (ROS) responsible for the photodegradation of MB dye. Furthermore, the CGS nanocomposite exhibited outstanding recyclability of 84% after five consecutive runs, demonstrating its potential for use in practical applications, particularly pollutant removal.

The Fabrication of Halogen-Doped FeWO4 Heterostructure Anchored over Graphene Oxide Nanosheets for the Sunlight-Driven Photocatalytic Degradation of Methylene Blue Dye

Rapid industrialization and urbanization are the two significant issues causing environmental pollution. The polluted water from various industries contains refractory organic materials such as dyes. Heterogeneous photocatalysis using semiconductor metal oxides is an effective remediation technique for wastewater treatment. In this research, we used a co-precipitation-assisted hydrothermal method to synthesize a novel I-FeWO4/GO sunlight-active nanocomposite. Introducing dopant reductive iodine species improved the catalytic activity of FeWO4/GO. I- ions improved the catalytic performance of H2O2 by doping into FeWO4/GO composite. Due to I- doping and the introduction of graphene as a support medium, enhanced charge separation and transfer were observed, which is crucial for efficient heterogeneous surface reactions. Various techniques, like FTIR, SEM-EDX, XRD, and UV-Vis spectroscopy, were used to characterize composites. The Tauc plot method was used to calculate pristine and iodine-doped FeWO4/GO bandgap. Iodine doping reduced the bandgap from 2.8 eV to 2.6 eV. The degradation of methylene blue (MB) was evaluated by optimizing various parameters like catalyst concentration, oxidant dose, pH, and time. The optimum conditions for photocatalysts where maximum degradation occurred were pH = 7 for both FeWO4/GO and I-FeWO4/GO; oxidant dose = 9 mM and 7 mM for FeWO4/GO and I-FeWO4/GO; and catalyst concentration = 30 mg and 35 mg/100 mL for FeWO4/GO and I-FeWO4/GO; the optimum time was 120 min. Under these optimum conditions, FeWO4/GO and I-FeWO4/GO showed 92.0% and 97.0% degradation of MB dye.

Heterogeneous Fenton system driven by iron-loaded sludge biochar for sulfamethoxazole-containing wastewater treatment

In this study, the treatment performance of a heterogeneous Fenton system (Fe-BC + H₂O₂) driven by iron-loaded sludge biochar (Fe-BC) on wastewater containing sulfamethoxazole (SMX) was investigated using the CODcr removal efficiency (φ) as an indicator. The batch experimental results showed that the optimal operating conditions were as follow: initial pH 3, H₂O₂ concentration 20 mmol L^-1, Fe-BC dose 1.2 g L^-1, temperature 298 K. The corresponding φ was as high as 83.43%. The removal of CODcr was better described by BMG model and revised BMG (BMGL) model. According to the BMGL model, the φ_max could be 98.37% (298 K). Moreover, the removal of CODcr was a diffusion-controlled process, while liquid film diffusion and intraparticle diffusion together determined its removal rate. The removal of CODcr should be a synergistic effect of adsorption and Fenton oxidation (real heterogeneous Fenton and homogeneous Fenton) and other pathways. Their contributions were 42.79%, 54.01% and 3.20%, respectively. For homogeneous Fenton, there seemed to be two simultaneous SMX degradation pathways: SMX→4-(pyrrolidine-11-sulfonyl)-aniline→N-(4-aminobenzenesulfonyl) acetamide/4-amino-N-ethyl benzene sulfonamides→4-amino-N-hydroxy benzene sulfonamides; SMX→N-ethyl-3-amino benzene sulfonamides→4-methanesulfonylaniline. In summary, Fe-BC had potential for practical application as a heterogeneous Fenton catalyst.

Synthesis and photocatalytic activity of a lanthanum doped CoFe2O4/TiO2 nanocomposite for photodegradation of methylene blue organic dye

In this study, a 0.2CoFe2O4/0.8TiO2-5%La nanocomposite was synthesized by a co-precipitation and a hydrothermal method and then was applied as a high activity photocatalyst for degradation of methylene blue under visible light irradiation. The 0.2CoFe2O4/0.8TiO2-5%La material was characterized by X-ray diffraction, Raman spectra, scanning electron microscope/transmission electron microscope and UV-Vis techniques. The photocatalytic activity of the material was initially investigated through the decomposition of methylene blue. The synthetic 0.2 CoFe2O4/0.8 TiO2-5% La showed excellent photocatalytic activity for degradation of methylene blue under visible light irradiation. Methylene blue could be degraded by more than 99.14% after only 50 min.

The Design of Ternary Composite Polyurethane Membranes with an Enhanced Photocatalytic Degradation Potential for the Removal of Anionic Dyes

Photocatalysis is an efficient and an eco-friendly way to eliminate organic pollutants from wastewater and filtration media. The major dilemma coupled with conventional membrane technology in wastewater remediation is fouling. In this study, the photocatalytic degradation potential of novel thermoplastic polyurethane (TPU) based NiO on aminated graphene oxide (NH₂-GO) nanocomposite membranes was explored. The fabrication of TPU-NiO/NH₂-GO membranes was achieved by the phase inversion method and analyzed for their performances. The membranes were effectively characterized in terms of surface morphology, functional group, and crystalline phase identification, using scanning electron microscopy, Fourier transformed infrared spectroscopy, and X-ray diffraction analysis, respectively. The prepared materials were investigated in terms of photocatalytic degradation potential against selected pollutants. Approximately 94% dye removal efficiency was observed under optimized conditions (i.e., reaction time = 180 min, pH 3-4, photocatalyst dose = 80 mg/100 mL, and oxidant dose = 10 mM). The optimized membranes possessed effective pure water flux and excellent dye rejection (approximately 94%) under 4 bar pressure. The nickel leaching in the treated wastewater sample was determined using inductively coupled plasma-optical emission spectrometry (ICP-OES). The obtained data was kinetically analyzed using first- and second-order reaction kinetic models. A first-order kinetic study was suited for the present study. Besides, the proposed membranes provided excellent photocatalytic ability up to six reusability cycles. The combination of TPU and NH₂-GO provided effective strength to membranes and the immobilization of NiO nanoparticles improved the photocatalytic behavior.