Optimization of microwave-assisted extraction of phenolics from potato and its downstream waste using orthogonal array design

Collaborative performance of enzymatic saccharification and organic pollutant degradation from PHP (phosphoric acid coupled with hydrogen peroxide) pretreatment of lignocellulose

As a newly developed technology, lignocellulose pretreatment of PHP (phosphoric acid coupled with hydrogen peroxide) can facilitate the enzymatic hydrolysis of pretreated lignocellulose for glucose production. It also has been found that the derived oxidative tail gas from pretreatment can facilely degrade organic pollutant. To balance the pollutant degradation and the glucose yield, the collaborative optimization on pretreatment was investigated. Results indicated that temperature, H3PO4 and H2O2 concentration were positively correlated with the model pollutant degradation (methylene blue) and enzymatic hydrolysis. Under the optimized conditions of temperature (55 °C), H3PO4 concentration (65%), and H2O2 concentration (7%), three typical agricultural residues, including wheat straw, Jerusalem artichoke stalks and corn stover, achieved 95.2%, 94.0% and 98.3% methylene blue degradation, and the corresponding cellulose-glucose conversion was 100%, 97.6% and 100.0%, respectively. While two typical woody residues of oak and birch sawdust achieved methylene blue degradation of 70.2% and 68.0%, and the corresponding cellulose-glucose conversion reached 88.3% and 84.0%, respectively. 90.2-93.6% H3PO4 could be recovered with a stable performance of methylene blue degradation of 98.8-99.7% and cellulose-glucose conversion of 96.1-99.8% in the 5 recycling batches. Overall, this work achieved the "win-win" function on pollutant removal and glucose production, and efficient solvent recycling, which further improved the applicability of PHP pretreatment.

Optimization and Bioactive Evaluation of Bifurcaria bifurcata Antioxidant-Rich Extracts for Functional Food and Pharmaceutical Applications

In recent years, consumers have been increasingly interested in natural, healthier, functional foods, with a focus on sea-based products such as algae. Bifurcaria bifurcata (BB) is a macroalga that belongs to the Phaeophyceae class. These brown algae are recognized as the source of bioactive molecules of great interest to the pharmaceutical and nutraceutical industries. The present work applied response surface methodology to optimize the microwave-assisted extraction of the poorly studied algae. The optimization variables were time, pressure, and solvent composition (ethanol/water) and the response parameters selected were yield, total phenolic and flavonoid content, and the antioxidant profile by evaluating DPPH•+, ABTS•+ scavenging activity, and β-carotene discoloration capacity. The results obtained reveal remarkable bioactivity of the crude extract of BB with positive results as an antioxidant and antimicrobial agent. Furthermore, the BB extract's capacity to inhibit enzymes related to neurodegenerative diseases and its anti-inflammatory and anti-proliferation activity open the possibility of future food or pharmaceutical applications.

Advances in the novel and green-assisted techniques for extraction of bioactive compounds from millets: A comprehensive review

Millets are rich in nutritional and bioactive compounds, including polyphenols and flavonoids, and have the potential to combat malnutrition and various diseases. However, extracting these bioactive compounds can be challenging, as conventional methods are energy-intensive and can lead to thermal degradation. Green-assisted techniques have emerged as promising methods for sustainable and efficient extraction. This review explores recent trends in employing green-assisted techniques for extracting bioactive compounds from millets, and potential applications in the food and pharmaceutical industries. The objective is to evaluate and comprehend the parameters involved in different extraction methods, including energy efficiency, extraction yield, and the preservation of compound quality. The potential synergies achieved by integrating multiple extraction methods, and optimizing extraction efficiency for millet applications are also discussed. Among several, Ultrasound and Microwave-assisted extraction stand out for their rapidity, although there is a need for further research in the context of minor millets. Enzyme-assisted extraction, with its low energy input and ability to handle complex matrices, holds significant potential. Pulsed electric field-assisted extraction, despite being a non-thermal approach, requires further optimization for millet-specific applications, are few highlights. The review emphasizes the importance of considering specific compound characteristics, extraction efficiency, purity requirements, and operational costs when selecting an ideal technique. Ongoing research aims to optimize novel extraction processes for millets and their byproducts, offering promising applications in the development of millet-based nutraceutical food products. Therefore, the current study benefits researchers and industries to advance extraction research and develop efficient, sustainable, and scalable techniques to extract bioactive compounds from millets.

The influence of conventional and novel blanching methods on potato granules, phytochemicals, and thermal properties of colored varieties

Introduction

Colored potatoes comprise many bioactive compounds that potentially support human health. Polyphenols present in them have associated therapeutic benefits like antimutagenic and anticarcinogenic properties.

Method

The current study aimed to explore the effects of different blanching methods (steam blanching, hot water blanching, and microwave-assisted blanching) on the phytochemical and structural aspects of PP-1901 and Lady Rosetta (LR) potato varieties. Changes in the antioxidant activity, color, total ascorbic acid, phenolic, and flavonoid content were based on the variations in parameters including temperature (blanching using hot water and steam) and capacity 100- 900 W (blanching using microwave).

Results

For both PP-1901 and LR varieties, all the blanching methods led to a significant reduction in residual peroxidase activity, as well as affecting their color. The preservation of bioactive substances exhibited a microwave steam>hot water blanching trend. Blanching significantly increased the antioxidant activity of all the samples. Additionally, Fourier-transform infrared spectroscopy revealed that phytocompounds were retained to their maximum in microwave-blanched samples, especially at 300 W. The type of blanching method significantly affected the thermal properties of potatoes by disrupting the ordered structure of the matrix.

Discussion

Microwaves at 300 W can be used as a novel and suitable alternative technique for blanching potatoes, which successfully retained the original quality of it in comparison to steam and hot water blanching.

Updating the status quo on the extraction of bioactive compounds in agro-products using a two-pot multivariate design. A comprehensive review

Extraction is regarded as the most crucial stage in analyzing bioactive compounds. Nonetheless, due to the intricacy of the matrix, numerous aspects must be optimized during the extraction of bioactive components. Although one variable at a time (OVAT) is mainly used, this is time-consuming and laborious. As a result, using an experimental design in the optimization process is beneficial with few experiments and low costs. This article critically reviewed two-pot multivariate techniques employed in extracting bioactive compounds in food in the last decade. First, a comparison of the parametric screening methods (factorial design, Taguchi, and Plackett-Burman design) was delved into, and its advantages and limitations in helping to select the critical extraction parameters were discussed. This was followed by a discussion of the response surface methodologies (central composite (CCD), Doehlert (DD), orthogonal array (OAD), mixture, D-optimal, and Box-Behnken designs (BBD), etc.), which are used to optimize the most critical variables in the extraction of bioactive compounds in food, providing a sequential comprehension of the linear and complex interactions and multiple responses and robustness tests. Next, the benefits, drawbacks, and possibilities of various response surface methodologies (RSM) and some of their usages were discussed, with food chemistry, analysis, and processing from the literature. Finally, extraction of food bioactive compounds using RSM was compared to artificial neural network modeling with their drawbacks discussed. We recommended that future experiments could compare these designs (BBD vs. CCD vs. DD, etc.) in the extraction of food-bioactive compounds. Besides, more research should be done comparing response surface methodologies and artificial neural networks regarding their practicality and limitations in extracting food-bioactive compounds.

Drying performance and energy consumption of Camellia oleifera seeds under microwave-vacuum drying

Microwave-vacuum drying performance and energy consumption of Camellia oleifera seeds were studied in this paper. The effects of microwave power, vacuum pressure and loading quantity were evaluated and discussed. Orthogonal experiments were also conducted to optimize the drying process. A new drying model based on the weibull distribution model was developed. Results showed that the microwave-vacuum drying process was dominated by internal water diffusion and surface water evaporation. As the microwave power and vacuum pressure increased and the loading quantity decreased, the drying time and energy consumption both decreased. However, too low or too high microwave power would increase the energy consumption. The optimal microwave-vacuum drying conditions were found to be a loading quantity of 150 g, a microwave power of 350 W and a vacuum pressure of 0.09 MPa. The developed drying model and the calculated scale and shape parameter were all consistent with experimental results.

Degradation and transformation mechanisms of numbing substances: Hydroxyl-α-sanshool & hydroxyl-β-sanshool from Zanthoxylum bungeanum exposed to acid environment

•

Isomerization and addition reactions of sanshools reduced the numbing degree for the first time.

•

Acidic environment promotes isomerization and addition reactions of numbing substances.

•

The degradation rates of hydroxyl-α-sanshool was 75.36%.

In present work, Zanthoxylum bungeanum meal (ZBM) used as experimental material, the stability of typical alkylamides (hydroxyl-α-sanshool and hydroxyl-β-sanshool) in ZBM under different acidification conditions was investigated, in order to reveal degradation or transformation mechanism of numbing substances from Z. bungeanum exposed to acid environment and its transform direction. The alkylamides content of ZBM was detected by using HPLC after different conditions of acidification. The results indicated that hydroxyl-α-sanshool and hydroxyl-β-sanshool under the concentration of hydrochloric acid is 14% decreased by 80% after only 0.5 h. Moreover, some of the components undergo isomerization and addition reactions in the process of acidification, the products of isomerization are hydroxyl-ε-sanshool and (1Z,2E,4E,8E,10E)-N-(2-hydroxy-2-methylpropyl)dodeca-2,4,8,10-tetraenimidic acid; and the product of the addition reaction is (2E,6E,8E,10E)-1-chloro-1-(2-hydroxy-2-methylpropyl)amino)dodeca-2,6,8,10-tetraen-1-ol, which indicated that acid environment has greatly changed the numbing substances in Z. bungeanum and its products.

PARAFAC modeling of dandelion phenolic compound fluorescence relation to antioxidant properties

The phenolic compounds in dandelion were extracted using different ethanol percentage solutions, identified with HPLC-MS, and their scavenging capabilities of DPPH, ABTS and OH radicals were determined. Then the excitation-emission matrix fluorescence spectroscopy coupled with parallel factor analysis (PARAFAC) was conveyed to analyze the relationship between phenolics, components scores of PARAFAC model and antioxidant capacities, based on linear regression method. The results showed that the relative content of chicoric acid, esculetin, caffeic acid, gallic acid monohydrate, eupatilin, caffeic acid-3-glucoside, corchorifatty acid F, and luteolin was higher than 0.5%, and the extraction solutions with 100% and 75% water had a better scavenging capacity of DPPH, ABTS and OH radicals. Two components PARAFAC model was identified with the comparatively higher sum of squares, core consistency values, and lower interactions numbers, and the established equations indicated the component scores had a linear regression relationship with antioxidant capacities of DPPH, and ABTS. The paper was proposed for the first time that the component scores of PARAFAC model might be treated as a useful indication for antioxidant capacity evaluation.

Microwave-assisted extraction of phenolic compounds from coffee (Coffea robusta L. Linden) bee pollen

Introduction: Coffee bee pollen contains some precious bioactive compounds, especially phenolic compounds. This material is easily found in many regions in Vietnam and is quite useful for human health.

Objective: The main aim of this study was to determine the best extraction conditions for the total polyphenol content (TPC) and antioxidant capacity (AC) of coffee (Coffea robusta L. Linden) bee pollen with microwave-assisted extraction (MAE).

Methods: TPC and AC of extract of coffee (C. robusta) bee pollen were determined using Folin-Ciocalteu (FC) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, respectively. In addition, micromorphology of sample was observed using scanning electron micrographs (SEM).

Results: The findings showed that all factors strongly affected the efficiency of the extraction process. The best extraction conditions obtained were ethanol concentration of 60% (v/v), solid to solvent ratio of 1/30 (w/v), extraction time of 7 min, and a microwave power of 314 W.

Conclusion: The highest TPC and AC obtained were 13.73 mg GAE/g DW and 10.08 µmol TE/g DW with aqueous ethanol as the solvent at the optimal extraction condition. In addition, the microstructures of the material changed insignificantly under microwave irradiation.

Recovery of Chlorogenic Acids from Agri-Food Wastes: Updates on Green Extraction Techniques

The agri-food sector produces a huge amount of agri-food wastes and by-products, with a consequent great impact on environmental, economic, social, and health aspects. The reuse and recycling of by-products represents a very important issue: for this reason, the development of innovative recovery and extraction methodologies must be mandatory. In this context of a circular economy, the study of green extraction techniques also becomes a priority in substitution of traditional extraction approaches. This review is focused on the recovery of chlorogenic acids from agri-food wastes, as these compounds have an important impact on human health, exhibiting several different and important healthy properties. Novel extraction methodologies, namely microwave and ultrasound-assisted extractions, supercritical fluid extraction, and pressurized-liquid extraction, are discussed here, in comparison with conventional techniques. The great potentialities of these new innovative green and sustainable approaches are pointed out. Further investigations and optimization are mandatory before their application in industrial processes.

LED-Induced Carotenoid Synthesis and Related Gene Expression in Brassica Microgreens

In this study, various ratios of combined red, blue, and amber light-emitting diodes (rbaLEDs) were investigated for their effect on the expression of carotenoid biosynthetic genes and carotenoid accumulation in eight Brassica microgreens. Total and individual (β-carotene, lutein, α-carotene, neoxanthin, and violaxanthin) carotenoids were increased 20-44 and 10-55%, respectively, under dose-dependent increasing amber-blue light and decreasing red in most microgreens. Lipophilic 2,2-diphenyl-1-picrylhydrazyl and ferric reducing antioxidant power antioxidant activities were significantly increased under higher amber and blue light fractions, while oxygen radical absorbance capacity was generally decreased. Under rbaLED in mizuna (B. rapa) microgreens, the lycopene epsilon cyclase (LYCε) expression was 10-15-fold higher, which resulted in downstream accumulation of α-carotene and lutein. Lycopene beta cyclase (LYCβ) was not significantly changed, suggesting that β-carotene, violaxanthin and neoxanthin were mainly controlled by upstream phytoene synthase and branch-point LYCε. Increased beta-ring carotenoid hydroxylase (CHXβ) expression was also consistent with lutein accumulation. This study demonstrated for the first time that amber LED was involved in the regulatory mechanism of carotenoid biosynthesis, thus a potential novel approach to production of antioxidant-rich microgreens.

Supercritical Carbon Dioxide Extraction of Phenolic Compounds from Potato (Solanum tuberosum) Peels

In the last three decades, greener technologies have been used, aiming at extracting phenolic compounds from vegetable matrices due to the inherent advantages compared to organic solvent-based methodologies. In this work, supercritical CO2 was investigated for recovering phenolic acids from potato peels. Following screening runs for assessing the significant extraction parameters, a Central Composite Design of Experiments was carried out aiming at process optimization, with methanol concentration (MeOH, %) and CO2 flow rate (qCO2, g/min) as independent variables. Both parameters were deemed to impart a significant effect on the final response. Although the major phenolic acid in potato peels is chlorogenic acid (CGA), the main compound extracted was caffeic acid (CFA), present at a concentration of 0.75 mg/g dry peel in the extracts. The optimum extraction conditions were 80 °C, 350 bar, MeOH 20%, and flow rate of 18.0 g/min, which enabled a total phenolic recovery of 37% and a CFA recovery of 82%. The antioxidant activity of the supercritical fluid extraction (SFE) extracts was also measured, with the highest scavenging capacity reaching 73%. The need for using mixtures of water and organic solvents as co-solvents in SFE to enable CGA recovery seems necessary, possibly due to its better dissolution in aqueous solutions than in pure solvents.

Green extraction techniques from fruit and vegetable waste to obtain bioactive compounds-A review

Food wastes imply significant greenhouse gas emissions, that increase the challenge of climate change and impact food security. According to FAO (2019), one of the main food wastes come from fruit and vegetables, representing 0.5 billion tons per year, of the 1.3 billion tons of total waste. The wastes obtained from fruit and vegetables have plenty of valuable components, known as bioactive compounds, with many properties that impact positively in human health. Some bioactive compounds hold antioxidant, anti-inflammatory, and anti-cancer properties and they have the capacity of modulating metabolic processes. Currently, the use of fruit and vegetable waste is studied to obtain bioactive compounds, through non-conventional techniques, also known as green extraction techniques. These extraction techniques report higher yields, reduce the use of solvents, employ less extraction time, and improve the efficiency of the process for obtaining bioactive compounds. Once extracted, these compounds can be used in the cosmetic, pharmaceutical, or food industry, the last one being focused on improving food quality.

Recent trends in extraction of plant bioactives using green technologies: A review

Phenolic compounds from plant sources have significant health-promoting properties and are known to be an integral part of folk and herbal medicines. Consumption of phenolics is known to alleviate the risk of various lifestyle diseases including cancer, cardiovascular, diabetes, and Alzheimer's. In this context, numerous plant crops have been explored and characterized based on phenolic compounds for their use as supplements, nutraceutical, and pharmaceuticals. The present review highlights some important source of bioactive phenolic compounds and novel technologies for their efficient extraction. These techniques include the use of microwave, ultrasound, and supercritical methods. Besides, the review will also highlight the use of response surface methodology (RSM) as a statistical tool for optimizing the recoveries of the phenolic bioactives from plant-based matrices.

Emerging Processing Technologies for the Recovery of Valuable Bioactive Compounds from Potato Peels

Potato peel (PP) is the major underutilised by-product in the potato-processing industry and a potential source of valuable bioactive molecules. Among them, glycoalkaloids and polyphenols are important precursors for steroid hormones and natural antioxidants, respectively. Moreover, the huge quantities of industrial potato-peel waste that are produced are a rich source of primary metabolites, which principally include starch as well as non-starch polysaccharides, proteins, lipids, lignin and cellulose. All carbohydrates are prone to undergo fermentation to produce ethanol, lactic and acetic acid. Finally, the main portion of PP is made up of alcohol-insoluble matter with a dietary fibre content of approximatively 40%. The present review summarises the recent advances and emerging technologies in potato-peel extraction and further valorisation processing in the food industry.

Advances and Prospects of Phenolic Acids Production, Biorefinery and Analysis

Biotechnological production of phenolic acids is attracting increased interest due to their superior antioxidant activity, as well as other antimicrobial, dietary, and health benefits. As secondary metabolites, primarily found in plants and fungi, they are effective free radical scavengers due to the phenolic group available in their structure. Therefore, phenolic acids are widely utilised by pharmaceutical, food, cosmetic, and chemical industries. A demand for phenolic acids is mostly satisfied by utilising chemically synthesised compounds, with only a low quantity obtained from natural sources. As an alternative to chemical synthesis, environmentally friendly bio-based technologies are necessary for development in large-scale production. One of the most promising sustainable technologies is the utilisation of microbial cell factories for biosynthesis of phenolic acids. In this paper, we perform a systematic comparison of the best known natural sources of phenolic acids. The advances and prospects in the development of microbial cell factories for biosynthesis of these bioactive compounds are discussed in more detail. A special consideration is given to the modern production methods and analytics of phenolic acids.

Development of a Low-Temperature and High-Performance Green Extraction Process for the Recovery of Polyphenolic Phytochemicals from Waste Potato Peels Using Hydroxypropyl β-Cyclodextrin

Potato peels (PP) are a major agri-food side-stream originating from potato processing, but to date, their green valorization as a bioresource of antioxidant polyphenols is limited to extraction processes involving mainly water/ethanol-based solvents, whereas other eco-friendly methodologies are scarce. This study aimed at developing a simple, straight-forward and green extraction methodology to effectively recover PP polyphenols, using hydroxypropyl β-cyclodextrin (HP-β-CD). After an initial assay to identify the optimal HP-β-CD concentration that would provide increased extraction yield, optimization based on response surface methodology enabled maximization of the extraction performance, providing a total polyphenol yield of 17.27 ± 0.93 mg chlorogenic acid equivalent g−1 dry mass, at 30 °C. Testing of temperatures higher than 30 °C and up to 80 °C did not favor higher yields. The extracts obtained with HP-β-CD were slightly richer in polyphenols than extracts prepared with conventional solvents, such as aqueous ethanol and methanol, displaying similar antioxidant characteristics. The major polyphenols that could be identified in the extracts were neochlorogenic, chlorogenic, caffeic and ferulic acids. The outcome of this study demonstrated that HP-β-CD may be used as a highly effective green means of recovering PP polyphenols, at near-ambient temperature.

Bioactive Phenolic Compounds From Agri-Food Wastes: An Update on Green and Sustainable Extraction Methodologies

Phenolic compounds are broadly represented in plant kingdom, and their occurrence in easily accessible low-cost sources like wastes from agri-food processing have led in the last decade to an increase of interest in their recovery and further exploitation. Indeed, most of these compounds are endowed with beneficial properties to human health (e.g., in the prevention of cancer and cardiovascular diseases), that may be largely ascribed to their potent antioxidant and scavenging activity against reactive oxygen species generated in settings of oxidative stress and responsible for the onset of several inflammatory and degenerative diseases. Apart from their use as food supplements or as additives in functional foods, natural phenolic compounds have become increasingly attractive also from a technological point of view, due to their possible exploitation in materials science. Several extraction methodologies have been reported for the recovery of phenolic compounds from agri-food wastes mostly based on the use of organic solvents such as methanol, ethanol, or acetone. However, there is an increasing need for green and sustainable approaches leading to phenolic-rich extracts with low environmental impact. This review addresses the most promising and innovative methodologies for the recovery of functional phenolic compounds from waste materials that have appeared in the recent literature. In particular, extraction procedures based on the use of green technologies (supercritical fluid, microwaves, ultrasounds) as well as of green solvents such as deep eutectic solvents (DES) are surveyed.

Characterization, bioavailability and protective effects of phenolic-rich extracts from almond hulls against pro-oxidant induced toxicity in Caco-2 cells

Almond hulls, the main by-product of almond production, are considered a valuable source of bioactive phenolic compounds. This study aimed to characterize the phenolic composition, bioavailability of the phenolic-rich extracts from almond hulls (PEAH), and their protective effect on oxidative stressed Caco-2 cells induced by tert-butylhydroperoxide (t-BOOH). The ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS) analysis detected 11 phenolic compounds in the PEAH with high total phenolic content and antioxidant activity. Oxidative Caco-2 cell damage was reduced by PEAH, especially at 5 μg/mL, through scavenging reactive oxygen species (ROS), modulating the cellular endogenous antioxidant system and cell redox at a predictable status. Also, in vitro digestion influenced the phenolic compounds' composition and antioxidant power of PEAH. These results suggested that almond hulls, rich in phenolic compounds, can meliorate the oxidative stressed Caco-2 cells and restore its impaired redox balance, and ultimately improve health benefits.

Characterisation and antioxidant activity of sohphlang (Flemingia vestita), a tuberous crop

This study aimed to assess the nutritional and antioxidant properties of sohphlang (Flemingia vestita), a tuber that is traditionally consumed in raw form in Meghalaya, a North-Eastern state of India. Cultivated sohphlang (CS) and market sohphlang (MS) flours were analysed for nutrient composition. The extracts of the flours from conventional-assisted-extraction (CAE), microwave-assisted-extraction (MAE) and ultrasound-assisted-extraction (UAE) were analysed for total phenolic content (TPC), total flavonoid content (TFC) and antioxidant activities (AA). CS flour exhibited good nutritional properties, TPC, TFC and AA than MS flour. Furthermore, MAE gave better extraction efficiency than UAE and CAE. HPLC results showed genistein as the predominant compound among the phenolic compounds identified that is comparable with soybean. Thus, tuber sohphlang that is eaten in raw form can serve as a versatile source of food and nutritional security to the people. The tuber also offers scope for exploiting its health benefitting functional ingredients.

Optimization of ultrasound-assisted extraction of poly-phenols from Ajuga ciliata Bunge and evaluation of antioxidant activities in vitro

Effective extraction of natural antioxidants from cheap plant sources is still a problem. In this paper, an excellent method of ultrasound-assisted extraction of phenolic compounds from Ajuga ciliata Bunge was studied. The effects of four factors including ethanol volume fraction, ultrasonic time, ultrasonic temperature and material liquid ratio were discussed. After single factor experiments had been investigated, a 4-factor, 3-level Box-Behnken design experiment was used to obtain the model optimum conditions, which are shown as follows: ethanol volume fraction of 41%, liquid-solid ratio of 35:1 mL/g, ultrasonic temperature of 60 °C and ultrasonic time of 50 min. Under these conditions, the experimental productivity is 3.552 mg/g. The spectra of Fourier infrared and energy dispersive X-ray suggest that phenolic compounds exist in the extracts. Besides, free radical scavenging potentials of superoxide anion, hydroxyl and DPPH were measured to evaluate their antioxidant properties. This study proves that the ultrasonic-assisted extraction technique can extract phenolic compounds with antioxidant capacity from Ajuga ciliata Bunge.

Extraction Optimization, Antioxidant Capacity and Phenolic Profiling of Extracts from Flesh, Peel and Whole Fruit of New Zealand Grown Feijoa Cultivars

Feijoa fruit is becoming increasingly popular, yet limited studies have focused on the antioxidant capacity and phenolic profiling of its extracts. In this research, optimization of phenolic extraction from feijoa flesh, peel, and whole fruit from four New Zealand grown cultivars was conducted using orthogonal design. Antioxidant activities of the extracts were assessed, followed by phenolic profiling by a validated liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) method. For feijoa flesh and whole fruit, the extraction was optimized using 70% ethanol, material to solvent ratio of 1:30, at extraction temperature of 50 °C for 30 min. For feijoa peel, extraction at 50 °C for 60 min using 50% ethanol with a material to solvent ratio of 1:30 were the optimized conditions. Results showed feijoa peel had higher total phenolic content (TPC) and antioxidant activities than the flesh and whole fruit. Overall, the Unique cultivar had a relatively higher TPC and antioxidant activity than the other cultivars tested. A total of 15 phenolic compounds were identified, and seven of them were reported for the first time in feijoa fruit. This is the first systematic investigation on the extraction method, phenolic content, antioxidant activity and phenolic profile of feijoa emphasis on comparison of sample types and cultivars.

Valorisation of black carrot pomace: microwave assisted extraction of bioactive phytoceuticals and antioxidant activity using Box-Behnken design

The present study compares three methods viz. microwave assisted extraction (MAE), ultrasonic-assisted extraction (UAE) and conventional solvent extraction (CSE) for extraction of phenolic compounds from black carrot pomace (BCP). BCP is the major by-product generated during processing and poses big disposal problem. Box-Behnken design using response surface methodology was employed to investigate and optimize the MAE of phenolics, antioxidant activity and colour density from BCP. The conditions for maximum recovery of polyphenolics were: microwave power (348.07 W), extraction time (9.8 min), solvent-solid ratio (19.3 mL/g) and ethanol concentration (19.8%). Under these conditions, the extract contained total phenolic content of 264.9 ± 10.02 mg gallic acid equivalents (GAE)/100 mL, antioxidant capacity (AOC) of 13.14 ± 1.05 µmol Trolox equivalents (TE)/mL and colour density of 68.63 ± 5.40 units. The total anthocyanin content at optimized condition was 753.40 ± 31.6 mg/L with low % polymeric colour of 7.40 ± 0.42. At optimized conditions, MAE yielded higher colour density (68.63 ± 5.40), polyphenolic content (264.9 ± 10.025 mg GAE/100 mL) and AOC (13.14 ± 1.05 µmol TE/mL) in a short time as compared to UAE and CSE. Overall results clearly indicate that MAE is the best suited method for extraction in comparison to UAE and CSE. The phenolic rich extract can be used as an effective functional ingredient in foods.

Ultrasound mediated accelerated Anti-influenza activity of Aloe vera

Aloe vera (AV) is popular and has been commercialized as a beauty product, laxative, herbal medicine, the antimicrobial activity of AV is proven. The antiviral activity of AV however, has not been well documented except for a handful reports. Till date extraction of AV compounds is popularized using organic solvents, since the active components are effectively extracted in methanol. In the current work, we have employed a 5 min ultrasound based extraction for the effective extraction of aloin and aloe-emodin compounds from AV in water. This rapid, one-pot extraction process resulted in enhanced extraction of flavonoids and phenolics and enrichment of the aloin and aloe-emodin moieties in the ulrasonicated water extracts. The extracts were tested for their anti-influenza activity and, the results showed that the ultrasound extraction enabled the water extracts to show excellent anti influenza activity comparable to that seen in the methanolic extracts. Compared to the methanolic extracts which showed high cytotoxicity, the water extracts showed zero cytotoxicity. Spectrophotometric scans of the extracts confirmed the enrichment of the aloin and aloe emodin peaks in the ultrasonicated extracts of AV, suggesting their handiwork behind the anti-influenza activity. The demonstrated technique if appropriately implicated, would lead to promising solutions in the pharmaceutical pursuit against influenza virus.

Bioactive compounds from bay leaves (Laurus nobilis) extracted by microwave technology

Laurus nobilis leaves contain flavored and bioactive components with relevant biological properties for human health that are attributed to an abundant presence of highly bioactive secondary metabolites. However, the separation process for these bioactive molecules from plant matrix is seriously limited by the presence of a physical barrier (cell wall). Thus, the use of novel extraction procedures to enhance their release is particularly important. In this work, the potential use of microwave-assisted extraction (MAE) as a tool to improve the extraction efficiency of bioactive compounds from bay leaves and their characterization was evaluated. The effects of irradiation time (3, 6 and 9 min) and aqueous ethanol concentration (0, 25 and 50%) on the extraction of phenolic compounds were evaluated. A response surface methodology was applied to determine the best extraction conditions by MAE. The maximum total phenolic compound under the best conditions (9 min time irradiation and aqueous ethanol 50%) was 10.63±0.91 mg gallic acid equivalent/g plant using MAE. Also, the antioxidant potential of the extracts obtained was evaluated.

Optimum Extraction, Characterization, and Antioxidant Activities of Polysaccharides from Flowers of Dendrobium devonianum

Response surface methodology (RSM) was employed to optimize the conditions for the ultrasonic-assisted extraction (UAE) of polysaccharides from the flowers of Dendrobium devonianum. The optimal conditions for the maximum yields of DDFPs are as follows: an extraction temperature of 63.13°C, an extraction time of 53.10 min, and a water-to-raw material ratio of 22.11 mL/g. Furthermore, three fractions (DDFPs30, DDFPs50, and DDFPs70) were prepared from Dendrobium devonianum flowers polysaccharides (DDFPs) by the stepwise ethanol precipitation method. The DDFPs50 exhibited the highest antioxidant activity compared to the other fractions. The molecular weight, polydispersity, and conformation of these fractions were also characterized. In particular, the monosaccharide composition analysis of the DDFPs indicates that mannose and glucose are the primary components, similar to those of the D. officinale plant. This study provides a rapid extraction technology and essential information for the production of DDFPs, which could be potentially used as healthcare food.

Extraction and isolation of polyhydroxy triterpenoids from Rosa laevigata Michx. fruit with anti-acetylcholinesterase and neuroprotection properties

Rosa laevigata fruit, at present, is becoming increasingly popular as a functional foodstuff with several nutritional and medicinal properties.

Sequential Combination of Microwave- and Ultrasound-Assisted Extraction of Total Flavonoids from Osmanthus fragrans Lour. Flowers

Microwave-assisted and ultrasound-assisted extraction assays were used to isolate total flavonoids (TF) from Osmanthus fragrans flowers. The effects of the solid-liquid ratio, ethanol concentration, microwave power, microwave extraction time, ultrasonic power and ultrasonic extraction time on the yield of TF were studied. A sequential combination of microwave- and ultrasound-assisted extraction (SC-MUAE) methods was developed, which was subsequently optimized by Box-Behnken design-response surface methodology (BBD-RSM). The interaction effects of the ethanol concentration (40-60%), microwave extraction time (5-7 min), ultrasonic extraction time (8-12 min) and ultrasonic power (210-430 W) on the yield of TF were investigated. The optimum operating parameters for the extraction of TF were determined to be as follows: ethanol concentration (48.15%), microwave extraction time (6.43 min), ultrasonic extraction time (10.09 min) and ultrasonic power (370.9 W). Under these conditions, the extraction yield of TF was 7.86 mg/g.

Optimization of simultaneous microwave/ultrasonic-assisted extraction of phenolic compounds from walnut flour using response surface methodology

CONTEXT

Walnut is a traditional food as well as a traditional medicine recorded in the Chinese Pharmacopoeia; however, the large amounts of walnut flour (WF) generated in walnut oil production have not been well utilized.

OBJECTIVE

This study maximized the total polyphenolic yield (TPY) from the walnut flour (WF) by optimizing simultaneous ultrasound/microwave-assisted hydroalcoholic extraction (SUMAE).

MATERIALS AND METHODS

Response surface methodology was used to optimize the processing parameters for the TPY, including microwave power (20-140 W), ultrasonic power (75-525 W), extraction temperature (25-55 °C), and time (0.5-9.5 min). The polyphenol components were analysed by LC-MS.

RESULTS

A second-order polynomial model satisfactorily fit the experimental TPY data (R² = 0.9932, P < 0.0001 and R_adj²    = 0.9868). The optimized quick extraction conditions were microwave power 294.38 W, ultrasonic power 93.5 W, temperature 43.38 °C and time 4.33 min, with a maximum TPY of 34.91 mg GAE/g, which was a rapid extraction. The major phenolic components in the WF extracts were glansreginin A, ellagic acid, and gallic acid with peak areas of 22.15%, 14.99% and 10.96%, respectively, which might be used as functional components for health food, cosmetics and medicines.

DISCUSSION AND CONCLUSION

The results indicated that walnut flour, a waste product from the oil industry, was a rich source of polyphenolic compounds and thus could be used as a high-value functional food ingredient.

Choline chloride (ChCl) and monosodium glutamate (MSG)-based green solvents from optimized cactus malic acid for biomass delignification

This work aimed to develop an efficient microwave-hydrothermal (MH) extraction of malic acid from abundant natural cactus as hydrogen bond donor (HBD) whereby the concentration was optimized using response surface methodology. The ideal process conditions were found to be at a solvent-to-feed ratio of 0.008, 120°C and 20min with 1.0g of oxidant, H₂O₂. Next generation environment-friendly solvents, low transition temperature mixtures (LTTMs) were synthesized from cactus malic acid with choline chloride (ChCl) and monosodium glutamate (MSG) as hydrogen bond acceptors (HBAs). The hydrogen-bonding interactions between the starting materials were determined. The efficiency of the LTTMs in removing lignin from oil palm biomass residues, empty fruit bunch (EFB) was also evaluated. The removal of amorphous hemicellulose and lignin after the pretreatment process resulted in an enhanced digestibility and thermal degradability of biomass.

Fried potatoes: Impact of prolonged frying in monounsaturated oils

Fresh potatoes were intermittently deep-fried up to recommended limits (175°C, 8h/day, 28h) in extra-virgin olive oil (EVOO), peanut oil (PO) and canola oil (CO), and compared for diverse chemical components and sensorial attributes, aiming to quantify the impact of prolonged frying on potatoes nutrients, and the potential alterations resulting from the use of different monounsaturated-rich oils. Independently of oil type, its degradation promotes time-dependent losses of important potato nutrients, as vitamin C. Regarding the monounsaturated-rich oils tested, potatoes fried in CO had more equilibrated fatty acid profiles, but higher amounts of aldehydes derived from PUFA oxidation, while in EVOO were enriched with phenolic compounds. Acrylamide amounts were not affected by oil type or frying hours. Sensory degradation was gradually perceived by the panellists, except in PO. Prolonged frying should not be studied only on the basis of oil degradation because, even if within regulated limits, it induces loss of important food compounds.

Optimization of Ultrasonic-Assisted Enzymatic Extraction Conditions for Improving Total Phenolic Content, Antioxidant and Antitumor Activities In Vitro from Trapa quadrispinosa Roxb. Residues

Stems are the important residues of Trapa quadrispinosa Roxb., which are abundant in phenolic compounds. Ultrasonic-assisted enzymatic extraction (UAEE) is confirmed as a novel extraction technology with main advantages of enhancing extraction yield and physiological activities of the extracts from various plants. In this study, UAEE was applied to obtain the highest yield of phenolic content, strongest antioxidant, and antitumor activities and to optimize the extraction conditions using response surface methodology (RSM). The extracts from the stems of T. quadrispinosa were characterized by determination of their antioxidant activities through 2,2-azinobis(3-ethylbenzthiazoline)-6-sulfonic acid (ABTS), 1,1-Diphenyl-2-picrylhydrazxyl (DPPH) radical scavenging, total antioxidant capacity (TAC), ferric reducing antioxidant capacity (FRAC) methods and of their antitumor activity by MTT method. The selected key independent variables were cellulase concentration (X₁: 1.5%–2.5%), extraction time (X₂: 20–30 min) and extraction temperature (X₃: 40–60 °C). The optimal extraction conditions for total phenolic content (TPC) value of the extracts were determined as 1.74% cellulase concentration, 25.5 min ultrasonic extraction time and 49.0 °C ultrasonic temperature. Under these conditions, the highest TPC value of 53.6 ± 2.2 mg Gallic acid equivalent (GAE)/g dry weight (DW) was obtained, which agreed well with the predicted value (52.596 mg GAE/g·DW. Furthermore, the extracts obtained from UAEE presented highest antioxidant activities through ABTS, DPPH, TAC and FRAC methods were of 1.54 ± 0.09 mmol Trolox equivalent (TE)/g·DW; 1.45 ± 0.07 mmol·TE/g·DW; 45.2 ± 2.2 mg·GAE/g·DW; 50.4 ± 2.6 μmol FeSO₄ equivalent/g·DW and lowest IC₅₀ values of 160.4 ± 11.6 μg/mL, 126.1 ± 10.8 μg/mL, and 178.3 ± 13.1 μg/mL against Hela, HepG-2 and U251 tumor cells, respectively. The results indicated that the UAEE was an efficient alternative to improve extraction yield and enhance the antioxidant and antitumor activities of the extracts. The phenolic extracts from the stems of T. quadrispinosa had significant antioxidant and antitumor activities, which could be used as a source of potential antioxidant and antitumor agents.