Development of oxidised and heat–moisture treated potato starch film

Effect of different modified potato starch on starch-based films containing ZIF-67@thymol

Zeolite imidazolate framework-67 (ZIF-67) was used to encapsulate thymol (THY) to improve the properties of potato starch films. The effect of different modified potato starches (acetate starch (AS), hydroxypropyl di-starch phosphate (HDSP), oxidized hydroxypropyl starch (OHS), and acetylated di-starch phosphate (ADSP)) on the film properties was investigated. The results showed that the modified potato starch film had better water resistance, mechanical property, and water vapor barrier than the natural potato starch film. Scanning electron microscopy observations showed that the smoothness of the modified film was advanced. Notably, the OHS film had the best oxidation resistance activity of 76.93 % compared to the other four films. Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were significantly inhibited in all potato starch films enhanced with ZIF-67@THY. Therefore, starch-based films incorporating ZIF-67@THY have a broad application prospect in food packaging.

Plant-Based Films for Food Packaging as a Plastic Waste Management Alternative: Potato and Cassava Starch Case

The escalating environmental impact of plastic packaging waste necessitates sustainable alternatives in food packaging. This study explores starch-based films derived from cassava and potato as viable substitutes, aiming to mitigate plastic pollution and enhance environmental sustainability. Utilizing a casting method, formulations optimized by CCRD were characterized for their physical, physicochemical, and morphological properties. Comprehensive analysis revealed both cassava and potato starch films to exhibit robust structural integrity, high tensile strength (up to 32.6 MPa for cassava starch films), and semi-crystalline morphology. These films demonstrated low water vapor permeability and moderate solubility, akin to conventional low-density polyethylene used in packaging. Differential scanning calorimetry indicated glass transition temperatures between 116.36 °C and 119.35 °C, affirming thermal stability suitable for packaging applications. Scanning electron microscopy confirmed homogeneous film surfaces, with cassava starch films (C4-15) exhibiting superior transparency and uniformity. X-ray diffraction corroborated the films' semi-crystalline nature, unaffected by sorbitol content variations. Despite their mechanical and thermal suitability, further enhancements in thermal degradation resistance are essential for broader thermoprocessing applicability. These findings underscore the potential of starch-based films to be used as lids or other part of a food package, decreasing the plastic dependency in food packaging, contributing decisively to waste reduction and environmental preservation.

Nanoscopic Characterization of Starch-Based Biofilms Extracted from Ecuadorian Potato (Solanum tuberosum) Varieties

Synthetic plastic polymers are causing considerable emerging ecological hazards. Starch-based biofilms are a potential alternative. However, depending on the natural source and extraction method, the properties of starch can vary, affecting the physicochemical characteristics of the corresponding casted films generated from it. These differences might entail morphological changes at the nanoscale, which can be explored by inspecting their surfaces. Potato (Solanum tuberosum) is a well-known tuber containing a high amount of starch, but the properties of the biofilms extracted from it are dependent on the specific variety. In this research, four Ecuadorian potato varieties (Leona Blanca, Única, Chola, and Santa Rosa) were analyzed and blended with different glycerol concentrations. The amylose content of each extracted starch was estimated, and biofilms obtained were characterized at both macroscopic and nanoscopic levels. Macroscopic tests were conducted to evaluate their elastic properties, visible optical absorption, water vapor permeability, moisture content, and solubility. It was observed that as the glycerol percentage increased, both moisture content and soluble matter increased, while tensile strength decreased, especially in the case of the Chola variety. These results were correlated to a surface analysis using atomic force microscopy, providing a possible explanation based on the topography and phase contrast observations made at the nanoscale.

The application of starch-based edible film in food preservation: a comprehensive review

Using renewable resources for food packaging not only helps reduce our dependence on fossil fuels but also minimizes the environmental impact associated with traditional plastics. Starch has been a hot topic in the field of current research because of its low cost, wide source and good film forming property. However, a comprehensive review in this field is still lacking. Starch-based films offer a promising alternative for sustainable packaging in the food industry. The present paper covers various aspects such as raw material sources, modification methods, and film formation mechanisms. Understanding the physicochemical properties and potential commercial applications is crucial for bridging the gap between research and practical implementation. Finally, the application of starch-based films in the food industry is discussed in detail. Different modifications of starch can improve the mechanical and barrier properties of the films. The addition of active substances to starch-based films can endow them with more functions. Therefore, these factors should be better investigated and optimized in future studies to improve the physicochemical properties and functionality of starch-based films. In summary, this review provides comprehensive information and the latest research progress of starch-based films in the food industry.

Development of cassava starch-based films incorporated with phenolic compounds produced by an Amazonian fungus

Drug-release systems have attracted attention over the last few years since they can be used as a substitute for traditional methods of drug delivery. These have the advantage of being directly administered at the treatment site and can maintain the drug at adequate levels for a longer period, thus increasing their efficacy. Starch-based films are interesting candidates for use as matrices for drug release, especially due to starch's non-toxic properties and its biocompatibility. Endophytic fungi are an important source of bioactive molecules, including secondary metabolites such as phenolic compounds with antioxidant activity. In the present study, cassava starch-based films were developed to act as release systems of phenolic compounds with antioxidant activity. The Amazonian endophytic fungus Aspergillus niger MgF2 was cultivated in liquid media, and the fungal extract was obtained by liquid-liquid partition with ethyl acetate. The starch-based films incorporated with the fungal extract were characterized in regards to their physicochemical properties. The release kinetics of the extract from the film and its antioxidant and cytotoxic properties were also evaluated. The films incorporated with the extract presented maximum release after 25 min at 37 °C and pH 6.8. In addition, it was observed that the antioxidant compounds of the fungal extract maintain their activity after being released from the film, and were non-toxic. Therefore, considering the promising physicochemical properties of the extract-incorporated films, and their considerable antioxidant capacity, the films demonstrate great biotechnological potential with diverse applications in the pharmacological and cosmetic industries.

Insights into starch-based gels: Selection, fabrication, and application

Starch a natural polymer, has made significant advancements in recent decades, offering superior performance and versatility compared to synthetic materials. This review discusses up-to-date diverse applications of starch gels, their fabrication techniques, and their advantages over synthetic materials. Starch gels renewability, biocompatibility, biodegradability, scalability, and affordability make them attractive. Also, advanced theoretical foundations and emerging industrial technologies could further expand their scope and functions inspiring new applications.

Extrusion and Co-extrusion: A Technology in Probiotic Encapsulation with Alternative Materials

Encapsulation, in particular extrusion and co-extrusion, is a common practice to protect probiotics from the harsh conditions of the digestive tract as well as processing. Hydrocolloids, including proteins and carbohydrates, natural or modified, are a group of ingredients used as the wall material in extrusion. Hydrocolloids, due to their specific properties, can significantly improve the probiotic survivability of the final powder during the microencapsulation process and storage. The present article will discuss the different kinds of hydrocolloids used for microencapsulation of probiotics by extrusion and co-extrusion, along with new sources of novel gums and their potential as wall material.

Influence of oxidation, acetylation and hydrothermal treatment on structure and functionality of common buckwheat starch

The set aim of present work was to investigate the effects of acetylation, oxidation and heat moisture treatment on physicochemical, pasting, gel texture, structural, thermal and morphological properties of common buckwheat starch. Swelling power and solubility of starches reduced after modification except acetylation. Color of buckwheat starch improved after oxidation and acetylation. Paste clarity increased while syneresis reduced following modification with the exception of oxidation. Pasting properties of buckwheat starch revealed increased peak viscosity and breakdown viscosity following modification treatments. Gel texture analysis depicted increased hardness and reduced springiness, chewiness and cohesiveness for modified starches of buckwheat. Diffractograms of starches showed variation in intensity of some bands. Heat moisture treatment increased agglomeration and oxidation caused slight depression on surface of some granules. Relative crystallinity reduced following oxidation and hydrothermal treatment of starch. The gelatinization temperatures were increased in hydrothermal treated starch samples while oxidation and acetylation reduced the gelatinization temperature. The findings of this work would favor the new applications of modified starch from common buckwheat.

Development of alginate-based film incorporated with anthocyanins of red cabbage and zinc oxide nanoparticles as freshness indicator for prawns

The objective of this study was to develop pH-sensitive film indicators for intelligent food packaging by incorporating red cabbage anthocyanins (RCA) and zinc oxide nanoparticles (ZnO NPs) into an alginate (Alg) film, aiming to mitigate the risk of foodborne illnesses. The films were fabricated using a solvent-casting method and crosslinked with a calcium chloride (CaCl2) solution. Thorough evaluations of the films' physical, mechanical, and structural properties demonstrated significant improvements in elastic modulus and UV/vis light barrier characteristics, reduced water vapor permeability (WVP), and moisture content attributed to integrating RCA and ZnO NPs. The resulting film displayed discernible color changes when exposed to various pH buffer solutions and ammonia vapor, indicating heightened sensitivity to pH fluctuations due to the presence of ZnO NPs. Visual assessment using prawns as test specimens revealed a color shift from violet (indicating satisfactory condition) to blue-greenish (indicating spoilage), corroborated by colorimetric analysis. Moreover, the Alg/ZnO/RCA film exhibited antioxidant and antibacterial properties, demonstrated biodegradation activity, and showed no toxic effects on RSC96 cells, further underscoring its potential as an effective freshness indicator for food products.

Development of Biodegradable Thermosetting Plastic Using Dialdehyde Pineapple Stem Starch

Starch extracted from pineapple stem waste underwent an environmentally friendly modification process characterized by low-energy consumption. This process resulted in the creation of dialdehyde pineapple stem starch featuring varying aldehyde contents ranging from 10% to 90%. Leveraging these dialdehyde starches, thermosetting plastics were meticulously developed by incorporating glycerol as a plasticizer. Concurrently, unmodified pineapple stem starch was employed as a control to produce thermoplastic material under identical conditions. The objective of streamlining the processing steps was pursued by adopting a direct hot compression molding technique. This enabled the transformation of starch powders into plastic sheets without the need for water-based gelatinization. Consequently, the dialdehyde starch-based thermosetting plastics exhibited exceptional mechanical properties, boasting a modulus within the range of 1862 MPa to 2000 MPa and a strength of 15 MPa to 42 MPa. Notably, their stretchability remained relatively modest, spanning from 0.8% to 2.4%. Comparatively, these properties significantly outperformed the thermoplastic counterpart derived from unmodified starch. Tailoring the mechanical performance of the thermosetting plastics was achieved by manipulating the glycerol content, ranging from 30% to 50%. Phase morphologies of the thermoset starch unveiled a uniformly distributed microstructure without any observable starch particles. This stood in contrast to the heterogeneous structure exhibited by the thermoplastic derived from unmodified starch. X-ray diffraction patterns indicated the absence of a crystalline structure within the thermosets, likely attributed to the establishment of a crosslinked structure. The resultant network formation in the thermosets directly correlated with enhanced water resistance. Remarkably, the thermosetting starch originating from pineapple stem starch demonstrated continued biodegradability following a soil burial test, albeit at a notably slower rate when compared to its thermoplastic counterpart. These findings hold the potential to pave the way for the utilization of starch-based products, thereby replacing non-biodegradable petroleum-based materials and contributing to the creation of more enduring and sustainable commodities.

Cationic starch: A functionalized polysaccharide based polymer for advancement of drug delivery and health care system - A review

Research and development in health care industry is in persistence progression. To make it more patient-friendly or to get maximum benefits from it, special attention to different advanced drug delivery system (ADDS) is employed that delivers the drug at the target site and will be able to sustain/control release of drugs. ADDS should be non-toxic, biodegradable, biocompatible along with desirable showing physicochemical and functional properties. These drug delivery systems can be totally based on polymers, either with natural or synthetic polymers. The molecular weight of polymer can be tuned and different groups of polymers can be modified or substituted with other functional groups. Degree of substitution is also tailored. Cationic starch in recent years is exploited in drug delivery, tissue engineering and biomedicine. Due to their abundant availability, low cost, easy chemical modification, low toxicity, biodegradability and biocompatibility, extensive research is now being carried out. Our present discussion will shed light on the usage of cationic starch in health care system.

Properties Comparison of Oxidized and Heat Moisture Treated (HMT) Starch-Based Biodegradable Films

Starch-based biodegradable films have been studied for a long time. To improve starch properties and to increase film characteristics, starch is commonly modified. Amongst different types of starch modifications, oxidation and heat moisture treatment are interesting to explore. Unfortunately, review on these modifications for film application is rarely found, although these starch modifications provide interesting results regarding the starch and film properties. This paper aims to discuss the progress of research on oxidized and heat moisture-treated-starch for edible film application. In general, both HMT and oxidation modification on starch lead to an increase in film's tensile strength and Young's modulus, suggesting an improvement in film mechanical properties. The elongation, however, tends to decrease in oxidized starch-based film, hence more brittle film. Meanwhile, HMT tends to result in a more ductile film. The drawback of HMT film is its lower transparency, while the opposite is observed in oxidized films. The observation on WVP (water vapor permeability) of HMT starch-based film shows that the trend of WVP is not consistent. Similarly, an inconsistent trend of WVP is also found in oxidized starch films. This suggests that the WVP parameter is very sensitive to intrinsic and extrinsic factors. Starch source and its concentration in film, film thickness, RH (relative humidity) of film storage, oxidation method and its severity, plasticizer type and its concentration in film, and crystallinity value may partly play roles in determining film properties.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Eco-friendly preparation and characterization of bioplastic films made from marine fish-scale wastes

Synthetic plastics are becoming hazardous wastes, posing a threat to environmental sustainable health; hence, they must be replaced with alternatives. This study aimed to prepare corn starch-based bioplastics using fish scale through film casting technique as an alternative to synthetic plastics. In this work, four types of bioplastic films (CSF, CSFSF1, CSFSF2, FSF) containing different percentages of fish-scale powder and corn starch were prepared. Physical and chemical properties such as texture, color, solubility in hot water, tensile strength, functional groups, and morphology of all the four types of the prepared bioplastics were analyzed. The mixture of fish-scale powder and corn starch powder in the ratio of 1:3 (CSFSF1) yielded the best results. Its average thickness is 0.0420 ± 0.001 mm, water absorption range is 55-60%, tensile strength is 6.06 ± 0.05 MPa, and thermal stability is 278.741 °C. In the biodegradability test, degradation was noticed after 7 days of treatment with organic waste. The degradation was confirmed by surface changes in the morphology and the development of Aspergillus sp. Corn starch film (CSF) exhibited the highest degradation (60%), while the fish-scales film (FSF) underwent the least degradation (28%). The produced bioplastics were prepared from eco-friendly, inexpensive, and natural materials. Thus, the present research has provided a viable alternative to synthetic plastics.

Characterization and antioxidant properties of chitosan/ethyl-vanillin edible films produced via Schiff-base reaction

In this paper, chitosan/ethyl-vanillin (CS-EV) Schiff-base edible films with CS and EV at different concentrations and ratios were successfully prepared. The optical barrier properties, water contact angle, mechanical performance, water vapor transmission, antioxidant properties, thermal properties, and morphological structure of the films were compared. The results suggested that the tensile strength (TS) attained a maximum value of 64.63 MPa at a concentration of 4% EV. Moreover, water diffusion was prevented through the compact structure of the CS-EV edible film. Additionally, the two sides of the CS-EV film show different textures due to their different hydrophilicity/hydrophobicity. In particular, the films of CS possessed superior thermal stability, while those of CS-EV exhibited higher antioxidant activity.

A Mini Review of Physicochemical Properties of Starch and Flour by Using Hydrothermal Treatment

Starch and flour from various plants have been widely used for sundry applications, especially in the food and chemical industries. However, native starch and flour have several weaknesses, especially in functional, pasting, and physicochemical properties. The quality of native starch and flour can be improved by a modification process. The type of modification that is safe, easy, and efficient is physical modification using hydrothermal treatment techniques, including heat moisture treatment (HMT) and annealing (ANN). This review discusses the hydrothermal modifications of starch and flour, especially from various tubers and cereals. The discussion is mainly on its effect on five parameters, namely functional properties, morphology, pasting properties, crystallinity, and thermal properties. Modification of HMT and ANN, in general, can improve the functional properties, causing cracking of the granule surface, stable viscosity to heat, increasing crystallinity, and increasing gelatinization temperature. However, some modifications of starch and flour by HMT and ANN had no effect on several parameters or even had the opposite effect. The summary of the various studies reviewed can be a reference for the development of hydrothermal-modified starch and flour applications for various industries.

Novel and Facile Synthesis of Biodegradable Plastic Films from Cornmeal by Using the Microwave Polymerization Technique

Millions of tons of plastic are produced annually, but a major portion of plastic waste remains unrecycled. The uncycled plastic ultimately becomes a major source of solid trash and releases a variety of chemicals into our environment which can adversely affect the human health and marine life. In this study, a novel approach has been opted to synthesize a biodegradable plastic by using the microwave polymerization technique. In this novel approach, raw material (cornmeal), plasticizer (glycerin), and additive (vinegar) have been combined together to fabricate biodegradable plastic films from the microwave polymerization method. A number of rheological properties such as shear stress (Pa), shear rate (1/s), strain, and viscosity (Pa.s) of newly synthesized plastic were studied. These properties confirmed the presence of a shear thinning effect in the biodegradable plastic films on the basis of flow behavior of cornmeal. In order to check the water uptake ability and biodegradability of the cornmeal-based plastic films, water uptake and biodegradation tests were carried out. The fabricated films were neat, thin, and chewable and demonstrate promising characteristics. Therefore, these synthesized films can potentially become a suitable candidate in the packaging industry.

Influence of Ulluco Starch Modified by Annealing on the Physicochemical Properties of Biodegradable Films

This work aimed to evaluate the use of annealing (ANN) ulluco starch in the preparation of biodegradable films and its impact on the physicochemical properties of the materials. Three film samples (FS1, FS2, and FS3) were prepared at a fixed starch concentration (2.6% w/v) using glycerol as a plasticizer and then compared to a control sample (FSC) prepared with native ulluco starch. The physical, mechanical, and thermal properties of the films were evaluated. The use of ANN starch decreased the solubility (from 21.8% to 19.5%) and the swelling power (from 299% to 153%) of the film samples. In addition, an increase in opacity and relative crystallinity (from 7.54% to 10.5%) were observed. Regarding the thermal properties, all the samples presented high stability to degradation, with degradation temperatures above 200 °C. However, the samples showed deficiencies in their morphology, which affected the barrier properties. The use of ANN starch has some advantages over native starch in preparing films. However, more analysis is needed to improve the barrier properties of the materials. This work reveals the potential of the ANN ulluco starch for biodegradable film preparation. In addition, the use of modified ulluco starch is an alternative to add value to the crop, as well as to replace non-biodegradable materials used in the preparation of packaging.

Potato starch films by incorporating tea polyphenol and MgO nanoparticles with enhanced physical, functional and preserved properties

Due to the massive environmental pollution caused by synthetic plastic packaging accumulation and contemporary necessities of food packaging materials, the biodegradable and multifunctional bionanocomposite films based on potato starch (PS) incorporating tea polyphenol (TP) and MgO nanoparticles (MgO-NPs) were successfully fabricated by the solution casting method, and their physical and functional properties and application in fruits preservation were systematically investigated. Incorporation of TP and MgO-NPs improved the films' tensile strength, UV light-blocking, hydrophobicity and thermal stability, and decreased their moisture content (from 14.02 % to 11.21 %), water solubility (from 19.57 % to 16.56 %), and water vapor permeability (from 17.32 to 9.07 × 10^-11 g∙m^-1∙s^-1∙Pa^-1). Moreover, the PS/TP/MgO-NPs films exhibited strong antioxidant activity, and remarkable antibacterial activity against Escherichia coli and Staphylococcus aureus with the diameter of inhibition zone of 25.60 mm and 27.50 mm, respectively. SEM, ATR-FTIR and XRD analyses indicated the TP and MgO-NPs were dispersed homogeneously in the PS matrix, and identified the molecular interactions of hydrogen bond, hydrophobic interaction and electrostatic attraction. Biodegradability assessment showed that all the films were rapidly decomposed within ~20 days under simulated environmental conditions. Compared to control, the PS/TP/MgO-NPs film-forming solution coatings were capable of maintaining fruit quality by reducing the change in weight loss, firmness and total soluble solids. Overall, these results suggested that the multifunctional bionanocomposite films could be a potential approach for developing sustainable active food packaging.

Development and Characterization of the Biodegradable Film Derived from Eggshell and Cornstarch

In the current study, cornstarch (CS) and eggshell powder (ESP) were combined using a casting technique to develop a biodegradable film that was further morphologically and physicochemically characterized using standard methods. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the morphology of the ESP/CS film, and the surface of the film was found to have a smooth structure with no cracks, a spherical and porous irregular shape, and visible phase separation, which explains their large surface area. In addition, the energy dispersive X-ray (EDX) analysis indicated that the ESP particles were made of calcium carbonate and the ESP contained carbon in the graphite form. Fourier Transform Infrared Spectroscopy indicated the presence of carbonated minerals in the ESP/CS film which shows that ESP/CS film might serve as a promising adsorbent. Due to the inductive effect of the O–C–O bond on calcium carbonate in the eggshell, it was discovered that the ESP/CS film significantly improves physical properties, moisture content, swelling power, water solubility, and water absorption compared to the control CS film. The enhancement of the physicochemical properties of the ESP/CS film was principally due to the intra and intermolecular interactions between ESP and CS molecules. As a result, this film can potentially be used as a synergistic adsorbent for various target analytes.

The effect of reduction on the properties of the regioselectively oxidized starch granules prepared by bromide-free oxidation system

Development of intact oxidized starch granules by regioselective oxidation technology is of interest and provides a new research direction for oxidized starch. In this study, new sodium tetrahydridoborate (NaBH₄)-treated oxidized starch (OS-BH₄) granules were prepared by a one-pot method, where native corn starch (NS) granules were oxidized by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)/sodium hypochlorite (NaClO) system followed by reduction with NaBH₄. Oxidized starch (OS) granules without NaBH₄ reduction were also prepared to investigate the effect of C6 aldehyde groups remained after TEMPO-mediated oxidation on properties of the granules. When degrees of oxidation were controlled to be not higher than 12%, both the OS and OS-BH₄ granules had similar morphology to the NS granules with envelopes. Compared to the OS granules, except for lower pasting temperatures and dextrose equivalents, the OS-BH₄ granules had higher molecular weights, degrees of polymerization (DP), peak viscosities, final viscosities, and swelling power. Difference of the properties was considered related to (1) repulsive forces formed between the C6 carboxylate groups, (2) C6 aldehyde groups with lower hydrophilicity than the C6 hydroxyl groups, and (3) some hemiacetal linkages formed between the C6 aldehyde groups and the hydroxyl groups. Furthermore, pregelatinized OS-BH₄ granules were preliminarily prepared, which showed good swelling behavior with intact granular morphology in alkaline environment.

Dual Modification of Sago Starch via Heat Moisture Treatment and Octenyl Succinylation to Improve Starch Hydrophobicity

To elucidate the pretreatment of a heat moisture treatment that could increase the DS and hydrophobicity of OSA starch, the effect of the moisture level of the HMT process on the physicochemical properties was investigated. The higher moisture content (MC) in the HMT process led to a decreasing degree of crystallinity and gelatinization enthalpy and also produced surface damage and cracking of the granules. HMT pretreatment with the right moisture content resulted in OSA starch with the maximum DS value and reaction efficiency. Pre-treatment HMT at 25% MC (HMT-25) followed by OSA esterification exhibited the highest DS value (0.0086) and reaction efficiency (35.86%). H25-OSA starch has been shown to have good water resistance (OAC 1.03%, WVP 4.92 × 10-5 g/s m Pa, water contact angle 88.43°), and conversely, has a high cold water solubility (8.44%). Based on FTIR, there were two new peaks at 1729 and 1568 cm-1 of the HMT-OSA starch, which proved that the hydroxyl group of the HMT starch molecule had been substituted with the carbonyl and carboxyl ester groups of OSA.

Physical, Mechanical, and Morphological Performances of Arrowroot (Maranta arundinacea) Fiber Reinforced Arrowroot Starch Biopolymer Composites

This research is driven by stringent environmental legislation requiring the consumption and use of environmentally friendly materials. In this context, this paper is concerned with the development and characterization of thermoplastic arrowroot starch (TPAS) based biocomposite films by incorporating arrowroot fiber (AF) (0–10%) into a glycerol plasticized matrix by using the solution casting method. Developed TPAS/AF composite films were investigated, such as physical, morphological (FESEM), tensile, and tear strength characteristics. The tensile and tear strengths of TPAS/AF composites were increased significantly from 4.77 to 15.22 MPa and 0.87 to 1.28 MPa, respectively, as compared to the control TPAS films, which were 2.42 MPa and 0.83 MPa, respectively, while elongation was significantly decreased from 25.57 to 6.21% compared to control TPAS film, which was 46.62%. The findings revealed that after the fiber was reinforced, the mechanical properties were enhanced, and the optimum filler content was 10%. Regardless of fiber loadings, the results of water absorption testing revealed that the composite films immersed in seawater and rainwater absorbed more water than distilled water. Overall, the results of this research focus on providing information on biopolymer composite film and revealing the great potential it has for the food packaging industry.

Crosslinked starch-coated cellulosic papers as alternative food-packaging materials

In general, during the production of cellulosic materials for food-packaging applications, lignin and other amorphous components are usually removed via the pulping and multilevel bleaching process to entirely separate them from the fiber.

Physical modification of starch by heat-moisture treatment and annealing and their applications: A review

Heat-moisture treatment (HMT) and annealing are hydrothermal starch modifications. HMT is performed using high temperature and low moisture content range, whereas annealing uses excess of water, a long period of time, and temperature above the glass transition and below the gelatinization temperature. This review focuses on: research advances; the effect of HMT and annealing on starch structure and most important properties; combined modifications; and HMT-starch and annealed-starch applications. Annealing and HMT can be performed together or combined with other modifications. These combinations contribute to new applications in different areas. The annealed and HMT-starches can be used for pasta, candy, bakery products, films, nanocrystals, and nanoparticles. HMT has been studied on starch digestibility and promising data have been reported, due to increased content of slowly digestible and resistant starches. The starch industry is in constant expansion, and modification processes increase its versatility, adapting it for different purposes in food industries.

Development of Starch-Based Materials Using Current Modification Techniques and Their Applications: A Review

Starch is one of the most common biodegradable polymers found in nature, and it is widely utilized in the food and beverage, bioplastic industry, paper industry, textile, and biofuel industries. Starch has received significant attention due to its environmental benignity, easy fabrication, relative abundance, non-toxicity, and biodegradability. However, native starch cannot be directly used due to its poor thermo-mechanical properties and higher water absorptivity. Therefore, native starch needs to be modified before its use. Major starch modification techniques include genetic, enzymatic, physical, and chemical. Among those, chemical modification techniques are widely employed in industries. This review presents comprehensive coverage of chemical starch modification techniques and genetic, enzymatic, and physical methods developed over the past few years. In addition, the current applications of chemically modified starch in the fields of packaging, adhesives, pharmaceuticals, agriculture, superabsorbent and wastewater treatment have also been discussed.

Determination of the Tensile Properties and Biodegradability of Cornstarch-Based Biopolymers Plasticized with Sorbitol and Glycerol

In this study, the effects of various quantities of sorbitol and glycerol plasticizers (0%, 30%, 45%, and 60%) on cornstarch-based film were examined to develop a novel polymer for usage with biodegradable materials. The film was prepared using the casting process. According to the test findings, the application of the plasticizer concentrations affected the thickness, moisture content, and water absorption of the film. When plasticizer concentrations were increased to 60%, the tensile stress and Young’s modulus of plasticized films dropped regardless of plasticizer type. However, the thin film with addition of 30% sorbitol plasticizer demonstrated a steady value of Young’s modulus (60.17 MPa) with an increase in tensile strength (13.61 MPa) of 46%, while the lowest combination of tensile strength and Young’s modulus is the film that was plasticized with 60% glycerol, with 2.33 MPa and 16.23 MPa, respectively. In summary, the properties and performance of cornstarch-based film were greatly influenced by plasticizer types and concentrations. The finest set of features in this research appeared in the film plasticized with 30% sorbitol, which achieved the best mechanical properties for food packaging applications.

Combination of Sorbitol and Glycerol, as Plasticizers, and Oxidized Starch Improves the Physicochemical Characteristics of Films for Food Preservation

The aim of this work was to use glycerol (Gly) and sorbitol (Sor) as plasticizers with oxidized starch potato (OS) to produce biodegradable and environmentally friendly films, and to demonstrate the resulting physicochemical and functional viability without subtracting the organoleptic characteristics of the food. Analyses by water vapor permeability (WVP), attenuated total reflection Fourier transform infrared spectra (ATR-FTIR), scanning electron microscopy (SEM), tensile strength (TS), and transparency (UV) showed that the best film result was with 1.5 g of Gly and 2.0 g of Sor, conferred shine, elasticity 19.42 ± 6.20%, and mechanical support. The starch oxidized to 2.5%, contributing a greater transparency of 0.33 ± 0.12 and solubility of 78.90 ± 0.94%, as well as less permeability to water vapor 6.22 ± 0.38 gmm^-2 d^-1 kPa^-1. The films obtained provide an alternative for use in food due to their organic compounds, excellent visual presentation, and barrier characteristics that maintain their integrity and, therefore, their functionality.

Effect of Cross-Linking Modification on Structural and Film-Forming Characteristics of Pearl Millet (Pennisetum glaucum L.) Starch

Pearl millet starch was modified using epichlorohydrin (EPI) at different concentrations (0.1%; 0.3%; 0.5%; and 0.8%) and evaluated for physicochemical, rheological, in vitro digestibility, and film-forming characteristics. The degree of cross-linking was observed at higher levels (0.5% and 0.8%) of EPI. Upon cross-linking, breakdown and setback viscosity reduced whereas pasting temperature was increased. Storage modulus (G′) and loss modulus (G″) value of cross-linked (CL) starches ranged between 2877 to 5744 Pa and 168 to 237 Pa, respectively, during the frequency sweep test. A drastic decrease was observed for steady shear (yield stress and consistency index) characteristics of CL starches. Resistant starch (RS) content was increased after starch modification, which imparts its nutritional values and starch modified at 0.8% had the highest RS content. Modifications of starch at different levels had significant effects on the moisture, opacity, solubility and mechanical properties of films. Outcomes of this study will be helpful to understand the properties of native and CL starches for their potential applications in preparation of edible films.

Effects of Hydrothermal Treatments on Physicochemical Properties and In Vitro Digestion of Starch

Starchy food items such as rice and potato with high carbohydrate content raise blood sugar. Hence, consuming low glycaemic foods is one tool to keep diabetes under control. In this study, potato and brown rice (Njavara rice) starches were subjected to hydrothermal treatments: heat moisture treatment (HMT) and annealing (ANN) to develop starch-based food products fit for consumption by diabetic patients. The effects of hydrothermal treatments on physicochemical properties and in-vitro enzymatic digestion of starch were determined. It was observed that hydrothermal treatments decreased the swelling power (SP)% and increased the water solubility (WS)% of the native starches. Native potato starch (PSN) showed a high SP of 80.33%, while annealed potato starch (PANN) and heat moisture treated potato starch (PHMT) showed SP reduced to 65.33% and 51.66%, respectively. Similarly, the SP % reduced from 64.33% in native brown rice (BRN) to 44.66% in annealed brown rice (BRANN) and 38.33% in heat moisture treated brown rice (BRHMT). WS % increased from 32.86% in PSN to 36.66% in PANN and 40.66% in PHMT. In BRN, the WS % increased from 14.0% to 14.66% in BRANN and 18.33% in BRHMT. Amylose content increased from 13.23% and 14.56% in PSN and BRN to 16.14% in PANN 17.99% in PHMT, 17.33% in BRANN, and 18.98% in BRHMT. The PSN crystallinity index reduced from 33.49 to 30.50% in PANN and 32.60% in PHMT. At 12 h of enzymatic digestion, it was found that the degree of hydrolysis (DoH) of PHMT (31.66%) and PANN (36.82%) reduced when compared to PSN (41.09%). Similarly, BRHMT exhibited the lowest DoH at 12 h compared to BRANN (29.24%) and BRN (35.48%). This study highlights the importance of hydrothermal treatments on starch in developing low glycaemic index commercial starch-based food products.

Functionality and Applicability of Starch-Based Films: An Eco-Friendly Approach

The accumulation of high amounts of petro-based plastics is a growing environmental devastation issue, leading to the urgent need to innovate eco-safe packaging materials at an equivalent cost to save the environment. Among different substitutes, starch-based types and their blends with biopolymers are considered an innovative and smart material alternative for petrol-based polymers because of their abundance, low cost, biodegradability, high biocompatibility, and better-quality film-forming and improved mechanical characteristics. Furthermore, starch is a valuable, sustainable food packaging material. The rising and growing importance of designing starch-based films from various sources for sustainable food packaging purposes is ongoing research. Research on "starch food packaging" is still at the beginning, based on the few studies published in the last decade in Web of Science. Additionally, the functionality of starch-based biodegradable substances is technically a challenge. It can be improved by starch modification, blending starch with other biopolymers or additives, and using novel preparation techniques. Starch-based films have been applied to packaging various foods, such as fruits and vegetables, bakery goods, and meat, indicating good prospects for commercial utilization. The current review will give a critical snapshot of starch-based films' properties and potential applicability in the sustainable smart (active and intelligent) new packaging concepts and discuss new challenges and opportunities for starch bio composites.

Structural and Film-Forming Properties of Millet Starches: A Comparative Study

Millets are an underutilized and important drought-resistant crop, which are mainly used for animal feed. The major constituent in millet is starch (70%); millet starch represents an alternative source of starches like maize, rice, potato, etc. This encouraged us to isolate and characterize the starches from different millet sources and to evaluate the application of these starches in edible film preparation. In the present study, the physicochemical, morphological, and film-forming characteristics of millet starches were studied. The amylose content, swelling power, and solubility of millet starches ranged from 11.01% to 16.61%, 14.43 to 18.83 g/g, and 15.2% to 25.9%, respectively. Significant differences (p < 0.05) were found with different pasting parameters, and the highest peak (2985 cP), breakdown (1618 cP), and final viscosity (3665 cP) were observed for barnyard, proso, and finger millet starch, respectively. Little millet starch achieved the highest pasting temperature. All starches showed A-type crystalline patterns, and relative crystallinity was observed at levels of 24.73% to 32.62%, with proso millet starch achieving the highest value. The light transmittance of starches varied from 3.3% to 5.2%, with proso millet starch showing the highest transparency. Significant differences (p < 0.05) were observed in the water solubility, thickness, opacity and mechanical characteristics of films. The results of the present study facilitate a better assessment of the functional characteristics of millet starches for their possible applications in the preparation of starch films.

Development and Characterization of Physical Modified Pearl Millet Starch-Based Films

Pearl millet is an underutilized and drought-resistant crop that is mainly used for animal feed and fodder. Starch (70%) is the main constituent of the pearl millet grain; this starch may be a good substitute for major sources of starch such as corn, rice, potatoes, etc. Starch was isolated from pearl millet grains and modified with different physical treatments (heat-moisture (HMT), microwave (MT), and sonication treatment (ST)). The amylose content and swelling capacity of the starches decreased after HMT and MT, while the reverse was observed for ST. Transition temperatures (onset (To), peak of gelatinization (Tp), and conclusion (Tc)) of the starches ranged from 62.92-76.16 °C, 67.95-81.05 °C, and 73.78-84.50 °C, respectively. After modification (HMT, MT, and ST), an increase in the transition temperatures was observed. Peak-viscosity of the native starch was observed to be 995 mPa.s., which was higher than the starch modified with HMT and MT. Rheological characteristics (storage modulus (G') and loss modulus (G'')) of the native and modified starches differed from 1039 to 1730 Pa and 83 to 94 Pa; the largest value was found for starch treated with ST and HMT. SEM showed cracks and holes on granule surfaces after HMT as well as MT starch granules. Films were prepared using both native and modified starches. The modification of the starches with different treatments had a significant impact on the moisture, transmittance, and solubility of films. The findings of this study will provide a better understanding of the functional properties of pearl millet starch for its possible utilization in film formation.

Effect of glycerol plasticizer loading on the physical, mechanical, thermal, and barrier properties of arrowroot (Maranta arundinacea) starch biopolymers

This research was set out to explore the development of arrowroot starch (AS) films using glycerol (G) as plasticizer at the ratio of 15, 30, and 45% (w/w, starch basis) using solution casting technique. The developed films were analyzed in terms of physical, structural, mechanical, thermal, environmental, and barrier properties. The incorporation of glycerol to AS film-making solution reduced the brittleness and fragility of films. An increment in glycerol concentration caused an increment in film thickness, moisture content, and solubility in water, whereas density and water absorption were reduced. The tensile strength and modulus of G-plasticized AS films were reduced significantly from 9.34 to 1.95 MPa and 620.79 to 36.08 MPa, respectively, while elongation at break was enhanced from 2.41 to 57.33%. FTIR analysis revealed that intermolecular hydrogen bonding occurred between glycerol and AS in plasticized films compared to control films. The G-plasticized films showed higher thermal stability than control films. The cross-sectional micrographs revealed that the films containing 45% glycerol concentration had higher homogeneity than 15% and 30%. Water vapour permeability of plasticized films increased by an increase in glycerol concentrations. The findings of this research provide insights into the development of bio-degradable food packaging.