Spectral characterisation of Z-isomers of lycopene formed during heat treatment and solvent effects on the E/Z isomerisation process

Photosensitized Z-isomerization of (all-E)-carotenoids by a natural sensitizer riboflavin (vitamin B2): Experimental and quantum chemistry studies

Recent studies have shown that the Z-isomers of carotenoids have higher bioavailability and potentially greater biological activity than the naturally predominant all-E-isomers. Therefore, the development of a safe and efficient isomerization method is required. In this study, a riboflavin-mediated photoisomerization technique was established for increasing the Z-isomer ratio of carotenoids. Initially, to understand the riboflavin-mediated photoisomerization characteristics of carotenoids, the effects of the reaction conditions (e.g., riboflavin concentration, photoirradiation wavelength, and solvent type) on the isomerization and degradation of lycopene were studied, and the total Z-isomer ratio was successfully increased by >50 %. Riboflavin-mediated photoisomerization was also observed in other carotenoids, that is, β-carotene, lutein, astaxanthin, and fucoxanthin. Subsequently, the riboflavin-mediated photoisomerization of lycopene was investigated using quantum chemical calculations, which indicated that the isomerization proceeded via triplet-triplet energy transfer (TTET) from excited riboflavin to lycopene.

Vegetables containing sulfur compounds promote trans-isomerization of unsaturated fatty acids in triacylglycerols during the cooking process

Growing evidence indicates that the intake of trans-fatty acids (TFAs) has been associated with a higher risk of cardiovascular disease; therefore, various industrial measures have been taken to reduce the amount of TFAs consumed. However, research on TFAs formed during cooking is limited. Isothiocyanates and polysulfides, which are widely distributed in various vegetables, have recently been shown to promote the cis-trans isomerization of double bonds. However, the effects of these sulfur compounds on unsaturated fatty acids (UFAs) comprising edible oils (triacylglycerols) are unknown. To further reduce the intake of TFAs, a better understanding of the effect of the presence of these sulfur compounds on the formation of TFAs under cooking conditions is important. This study investigated the isomerization characteristics of UFAs in the presence of isothiocyanates and polysulfides in model systems using high-purity compounds as well under simulated cooking conditions using food samples. The outcomes of the model system indicated that these sulfur compounds significantly enhance the thermal isomerization, especially at temperatures ≥140 °C. Furthermore, the addition of antioxidants substantially inhibited the isomerization enhancement effect of isothiocyanates, whereas that of polysulfides was marginally moderated. A similar trend was observed under simulated cooking conditions. The results suggest that cooking with sulfur-compound-rich vegetables, especially garlic and onion, which are rich in polysulfides, can potentially result in increased trans fatty acid intake.

Possibility of refining carotenoid geometrical isomer analysis utilizing DFT-based quantum chemical calculations

We performed quantum chemical calculations based on the density functional theory (DFT) for the all-E- and several Z-isomers of three commercially important carotenoids (lycopene, β-carotene, and astaxanthin) and theoretically obtained the UV-Vis spectrum, response factor (determined from absorption intensities of the all-E- and the Z-isomers), and Q-ratio for each carotenoid isomer. The calculated spectra reproduced the experimental spectral shapes (e.g., the appearance of the Z-peaks and the blue shift of the main peaks for the Z-isomers) very well. The calculated response factors and Q-ratios also showed good agreement with reported values. Notably, response factors, which are difficult to determine experimentally, were well reproduced. These results suggest that quantum chemical calculations can be an effective tool for refining quantitative analysis and obtaining spectral data for carotenoids for which standards are difficult to obtain.

The Effect of Thermal Processes on the Organoleptic and Nutraceutical Quality of Tomato Fruit (Solanum lycopersicum L.)

The present study investigated the changes in the organoleptic characteristics, nutraceuticals, and antioxidant activity of tomato fruits subjected to different thermal processes: tomato sauce (80 °C for 30 min), blanching treatment (100 °C for 10 s), and the superheated steam method (SHS; 100 °C for 7 min) compared with fresh tomato fruit. Even though SHS negatively modified the color of the product (L* -7% than fresh tomatoes), it was the only technology able to increase the antioxidant activity compared with fresh tomatoes (e.g., +40.3% in ABTS assay), whilst lycopene and ascorbic acid contents reported similar values to fresh tomatoes. Regarding lycopene, only 5Z-lycopene (with a higher bioavailability than (all-E)-isomers) was found in all samples, and SHS maintained the same level observed in fresh tomato fruit. Furthermore, SHS technology preserved the antioxidant effects of fresh tomato extract even in human endothelial cells. This result confirmed those obtained in previous "cell-free" assays and demonstrated that SHS treatment significantly maintains the biological properties of tomato fruit in preventing oxidative stress. However, heat-treated tomato extracts did not show the same effects as fresh tomato extract against noradrenaline-induced vasoconstriction in isolated rat aortic rings. This study demonstrates that the use of SHS technology can be considered an innovative and sustainable thermal process (in terms of maintaining the nutraceutical quality) for tomato fruits, thus paving the way for future investigations on the effects of fresh and heat-treated tomatoes after intestinal absorption in vitro and in vivo.

Impact of thermal processing on polyphenols, carotenoids, glucosinolates, and ascorbic acid in fruit and vegetables and their cardiovascular benefits

Bioactive compounds in fruit and vegetables have a positive impact on human health by reducing oxidative stress, inflammation, and the risk of chronic diseases such as cancer, cardiovascular (CV) diseases, and metabolic disorders. However, some fruit and vegetables must be heated before consumption and thermal processes can modify the amount of nutraceuticals, that is, polyphenols, carotenoids, glucosinolates, and ascorbic acid, that can increase or decrease in relation to different factors such as type of processing, temperature, and time but also the plant part (e.g., flower, leaf, tuber, and root) utilized as food. Another important aspect is related to the bioaccessibility and bioavailability of nutraceuticals. Indeed, the key stage of nutraceutical bioefficiency is oral bioavailability, which involves the release of nutraceuticals from fruit and vegetables in gastrointestinal fluids, the solubilization of nutraceuticals and their interaction with other components of gastrointestinal fluids, the absorption of nutraceuticals by the epithelial layer, and the chemical and biochemical transformations into epithelial cells. Several studies have shown that thermal processing can enhance the absorption of nutraceuticals from fruit and vegetable. Once absorbed, they reach the blood vessels and promote multiple biological effects (e.g., antioxidant, anti-inflammatory, antihypertensive, vasoprotective, and cardioprotective). In this review, we described the impact of different thermal processes (such as boiling, steaming and superheated steaming, blanching, and microwaving) on the retention/degradation of bioactive compounds and their health-promoting effects after the intake. We then summarized the impact of heating on the absorption of nutraceuticals and the biological effects promoted by natural compounds in the CV system to provide a comprehensive overview of the potential impact of thermal processing on the CV benefits of fruit and vegetables.

Isomerization of carotenoids in photosynthesis and metabolic adaptation

In nature, carotenoids are present as trans- and cis-isomers. Various physical and chemical factors like light, heat, acids, catalytic agents, and photosensitizers can contribute to the isomerization of carotenoids. Living organisms in the process of evolution have developed different mechanisms of adaptation to light stress, which can also involve isomeric forms of carotenoids. Particularly, light stress conditions can enhance isomerization processes. The purpose of this work is to review the recent studies on cis/trans isomerization of carotenoids as well as the role of carotenoid isomers for the light capture, energy transfer, photoprotection in light-harvesting complexes, and reaction centers of the photosynthetic apparatus of plants and other photosynthetic organisms. The review also presents recent studies of carotenoid isomers for the biomedical aspects, showing cis- and trans-isomers differ in bioavailability, antioxidant activity and biological activity, which can be used for therapeutic and prophylactic purposes.

Lycopene in hydrophobic deep eutectic solvent with natural catalysts: A promising strategy to simultaneously promote lycopene Z-isomerization and extraction

Lycopene Z-isomerization and degradation in a series of hydrophobic natural deep eutectic solvents (HNDES) was firstly studied. The highest lycopene retention (about 84.6%) was found in HNDES composed of thymol and menthol (TM), and fatty acid-based HNDES promoted lycopene Z-isomerization (about 70% for total Z-isomers) and degradation. The addition of allyl isothiocyanate (AITC), diallyl disulfide (DADS) and capric acid into TM promoted Z-isomerization of lycopene (80% for total Z-isomers), especially 5Z-isomer (>30%), while lycopene remaining rate in TM/-capric acid was below 20%. During lycopene extraction from tomato power and watermelon juice by TM, the ratios of Z-isomer significantly (p < 0.05) increased especially with AITC and DADS (up to about 80%), and extraction yields increased even > 100% with capric acid. Lycopene in TM/-capric acid extracts showed low degradation with Z-isomers increasing during storage. TM with capric acid could simultaneously promote lycopene Z-isomerization and extraction.

A mechanistic updated overview on lycopene as potential anticancer agent

The potent relation between lycopene intake and reduced incidence of a variety of cancers has an increasing interest. This comprehensive review aims to highlight the in vivo and in vitro research evaluating the anticancer mechanisms of lycopene by underlining the experiment conditions. In addition to these, the general characterization of lycopene has been explained. A collection of relevant scientific pharmacological articles from the following databases PubMed/MedLine, Web of Science, Scopus, TRIP database, and Google Scholar on the mechanisms of anticancer molecular action and cellular effects of lycopene in various types of tumors was performed. The anticancer potential of lycopene has been described by various in vitro cells, animal studies, and some clinical trials. It has been revealed that the anticancer potential of lycopene is mainly due to its powerful singlet-oxygen quencher characteristics, simulation of detoxifying/antioxidant enzymes production, initiation of apoptosis, inhibition of cell proliferation and cell cycle progression as well as modulations of gap junctional communication, the growth factors, and signal transduction pathways. It has been highlighted that the anticancer properties of lycopene are primarily linked to factors including; dose, presence of drug delivery systems, type of cancer, tumor size, and treatment time.

Antioxidant, anticancer activity and molecular docking study of lycopene with different ratios of Z-isomers

The main purpose of this study was to compare the antioxidant and anticancer activities of lycopene samples with different ratios of Z-isomers. Lycopene samples containing 5%, 30%, and 55% Z-isomers were successfully prepared by using thermal treatment combined with anti-solvent crystallization. The in vitro bio-accessibility of lycopene was estimated by the determination of partition factor (PF) and the results showed that lycopene with 55% Z-isomers possessed the highest bio-accessibility. Moreover, DPPH and ABTS assays suggested that the antioxidant activity of lycopene increased with the Z-isomers content from 5% to 55%. However, lycopene inhibited the survival of human hepatocellular carcinoma cells (HepG2) in a dose and time-dependent manner. The highest inhibition of HepG2 cell lines was achieved by 55% Z-ratio of lycopene. The cell viability was 22.54% at 20 μg/mL after incubating for 24 h, the number of cells was significantly reduced and the morphology was shrunk. Furthermore, molecular docking was introduced to compare the binding ability between different lycopene isomers with Scavenger Receptor class B type I (SR-BI), and the results revealed that the affinity of (all-E)-lycopene with SR-BI was lower compared to 5Z-lycopene and 13Z-lycopene, providing the reasons for different bioavailability of the above-mentioned lycopene isomers. All the above results demonstrated that Z-isomers-rich lycopene could enhance bio-accessibility and biological functionality.

Development and validation of reliable astaxanthin quantification from natural sources

Astaxanthin derived from natural sources occurs in the form of various esters and stereomers, which complicates its quantitative and qualitative analysis. To simplify and standardize astaxanthin measurement with high precision, an enzymolysis-based astaxanthin quantification method was developed to hydrolyze astaxanthin esters and determine free astaxanthin in all its diastereomeric forms. Astaxanthin standards and differently processed Haematococcus pluvialis biomass were investigated. Linear correlation of standards of all-E-astaxanthin was observed in a measurement range between extract concentrations of 1.0 μg/mL and 11.2 μg/mL with a coefficient of variation below 5%. The diastereomers 9Z-, and 13Z-astaxanthin, and two di-Z-forms were detected. In contrast to the measurement of standards, the observed measurement range was extended to 30 μg/mL in extracts from H. pluvialis. The nature of the sample had to be taken into account for measurement, as cell, respectively, sample composition altered the optimal concentration for astaxanthin determination. The measurement precision of all-E-astaxanthin quantification in dried H. pluvialis biomass (1.2-1.8 mg dried biomass per sample) was calculated with a coefficient of variation of maximum 1.1%, whereas it was below 10% regarding the diastereomers. Complete enzymolysis was performed with 1.0 to 2.0 units of cholesterol esterase in the presence of various solvents with up to 2.0 mg biomass (dry weight). The method was compared with other astaxanthin determination approaches in which astaxanthin is converted to acetone in a further step before measurement. The developed method resulted in a higher total astaxanthin recovery but lower selectivity of the diastereomers. The reliability of photometric astaxanthin estimations was assessed by comparing them with the developed chromatographic method. At later stages in the cell cycle of H. pluvialis, all methods yielded similar results (down to 0.1% deviation), but photometry lost precision at earlier stages (up to 31.5% deviation). To optimize sample storage, the shelf life of astaxanthin-containing samples was investigated. Temperatures below -20°C, excluding oxygen, and storing intact H. pluvialis cells instead of dried or disrupted biomass reduced astaxanthin degradation.

High-temperature Supercritical CO2 Extraction of Lycopene from Tomato Powder for Enhancing Z-Isomerization and Recovery of Lycopene

This study aimed to investigate the effect of extraction conditions (temperature, pressure, and entrainer content) on the total Z-isomer ratio and recovery of lycopene in the extracts obtained after supercritical CO₂ (SC-CO₂) extraction of lycopene from tomato powder, with a particular focus on high-temperature conditions (≥ 80°C). The results showed that high-temperature SC-CO₂ extraction promoted the thermal isomerization of lycopene in a temperature-dependent manner up to 120℃. For example, when lycopene extraction was carried out at 80, 100, 120, and 140°C and a pressure of 30 MPa with an entrainer, ethanol, for 180 min, the total Z-isomer ratios obtained were 25.0, 57.2, 67.2, and 67.0%, respectively. The entrainer content also affected the Z-isomer ratio of lycopene, but the pressure had little effect. Interestingly, when SC-CO₂ extraction was performed under high-temperature conditions (≥ 100°C), the extraction efficiency of lycopene was dramatically improved, e.g., when lycopene was extracted at 80, 100, 120, and 140°C under the same other conditions as above, the recovery rates of lycopene were 4.6, 28.5, 79.9, 84.8%, respectively. In general, SC-CO₂ extraction of fat-soluble components is performed at temperatures in the range of 40-80°C because the SC-CO₂ density decreases with increasing temperature, and thus, their solubility (extraction efficiency) decreases. However, our results showed that the lycopene recovery increased in a temperature-dependent manner, which might be due to the solubility enhancement associated with thermal Z-isomerization of lycopene (i.e., lycopene Z-isomers have greater solubility than the naturally occurring all-E-isomer). The high-temperature SC-CO₂ extraction of lycopene from tomato materials not only enhances the Z-isomer ratio of lycopene in the resulting extracts but also improves lycopene recovery. This new finding will greatly contribute to the value addition and cost reduction of natural lycopene sources obtained by SC-CO₂ extraction.

Extraction of Fucoxanthin Isomers from the Edible Brown Seaweed Undaria pinnatifida Using Supercritical CO2: Effects of Extraction Conditions on Isomerization and Recovery of Fucoxanthin

Fucoxanthin, a characteristic carotenoid found in brown seaweeds, has been reported to exert beneficial biological activities, including antiobesity and anticancer activities Moreover, the Z-isomers of this compound potentially have greater bioavailability and biological activities than the naturally predominant all-E-isomer. Therefore, the consumption of Z-isomer-rich fucoxanthin through daily meals and dietary supplements may have beneficial effects. In this study, we aimed to investigate the effects of different extraction conditions on the Z-isomer ratio and recovery of fucoxanthin obtained from Undaria pinnatifida using supercritical CO2 (SC-CO2), particularly focusing on the high-temperature conditions that enhance thermal Z-isomerization. High-temperature SC-CO2 extraction at ≥ 120°C was found to enhance the thermal isomerization of fucoxanthin. For example, when the extraction was performed at 40, 80, 120, and 160°C and 30 MPa for 30 min with a co-solvent (ethanol), the total Z-isomer ratios were 11.7, 11.5, 18.7, and 26.5%, respectively. Furthermore, the high-temperature extraction significantly improved fucoxanthin recovery under high-pressure (≥ 30 MPa) conditions in the presence of the co-solvent. For example, when fucoxanthin was extracted at 40, 80, 120, and 160°C under the same conditions as above, the recoveries were 17.5, 20.6, 30.7, and 29.5%, respectively. Hence, the high-temperature SC-CO2 extraction of fucoxanthin from U. pinnatifida would not only enhance health benefits of fucoxanthin via the Z-isomerization but also improve the productivity. Moreover, the use of non-toxic CO2 and a low-toxicity organic solvent (ethanol) ensures that the final fucoxanthin product is safe for consumption. The Z-isomer-rich fucoxanthin obtained using this method is accordingly considered to have potential for use as a dietary supplement.

Integration of bioassay and non-target metabolite analysis of tomato reveals that β-carotene and lycopene activate the adiponectin signaling pathway, including AMPK phosphorylation

Adiponectin, an adipokine, regulates glucose metabolism and insulin sensitivity through the adiponectin receptor (AdipoR). In this study, we searched for metabolites that activate the adiponectin signaling pathway from tomato (Solanum lycopersicu). Metabolites of mature tomato were separated into 55 fractions by liquid chromatography, and then each fraction was examined using the phosphorylation assay of AMP-protein kinase (AMPK) in C2C12 myotubes and in AdipoR-knockdown cells by small interfering RNA (siRNA). Several fractions showed AMPK phosphorylation in C2C12 myotubes and siRNA-mediated abrogation of the effect. Non-targeted metabolite analysis revealed the presence of 721 diverse metabolites in tomato. By integrating the activity of fractions on AMPK phosphorylation and the 721 metabolites based on their retention times of liquid chromatography, we performed a comprehensive screen for metabolites that possess adiponectin-like activity. As the screening suggested that the active fractions contained four carotenoids, we further analyzed β-carotene and lycopene, the major carotenoids of food. They induced AMPK phosphorylation via the AdipoR, Ca²⁺/calmodulin-dependent protein kinase kinase and Ca²⁺ influx, in addition to activating glucose uptake via AdipoR in C2C12 myotubes. All these events were characteristic adiponectin actions. These results indicated that the food-derived carotenoids, β-carotene and lycopene, activate the adiponectin signaling pathway, including AMPK phosphorylation.

Oral Supplementation with Z-Isomer-Rich Astaxanthin Inhibits Ultraviolet Light-Induced Skin Damage in Guinea Pigs

The effect of oral supplementation with astaxanthin of different Z-isomer ratios on ultraviolet (UV) light-induced skin damage in guinea pigs was investigated. Astaxanthin with a high Z-isomer content was prepared from the all-E-isomer via thermal isomerization. Intact (all-E)-astaxanthin and the prepared Z-isomer-rich astaxanthin were suspended in soybean oil and fed to guinea pigs for three weeks. The UV-light irradiation was applied to the dorsal skin on the seventh day after the start of the test diet supplementation, and skin parameters, such as elasticity, transepidermal water loss (TEWL), and pigmentation (melanin and erythema values), were evaluated. The accumulation of astaxanthin in the dorsal skin was almost the same after consumption of the all-E-isomer-rich astaxanthin diet (E-AST-D; total Z-isomer ratio = 3.2%) and the Z-isomer-rich astaxanthin diet (Z-AST-D; total Z-isomer ratio = 84.4%); however, the total Z-isomer ratio of astaxanthin in the skin was higher in the case of the Z-AST-D supplementation. Both diets inhibited UV light-induced skin-damaging effects, such as the reduction in elasticity and the increase in TEWL level. Between E-AST-D and Z-AST-D, Z-AST-D showed better skin-protective ability against UV-light exposure than E-AST-D, which might be because of the greater UV-light-shielding ability of astaxanthin Z-isomers than the all-E-isomer. Furthermore, supplementation with Z-AST-D resulted in a greater reduction in skin pigmentation caused by astaxanthin accumulation compared to that of E-AST-D. This study indicates that dietary astaxanthin accumulates in the skin and appears to prevent UV light-induced skin damage, and the Z-isomers are more potent oral sunscreen agents than the all-E-isomer.

Optimization of Astaxanthin Recovery in the Downstream Process of Haematococcus pluvialis

Astaxanthin derived from Haematococcus pluvialis is a valuable metabolite applied in a wide range of products. Its extraction depends on a sophisticated series of downstream process steps, including harvesting, disruption, drying, and extraction, of which some are dependent on each other. To determine the processes that yield maximum astaxanthin recovery, bead milling, high-pressure homogenization, and no disruption of H. pluvialis biomass were coupled with spray-drying, vacuum-drying, and freeze-drying in all possible combinations. Eventually, astaxanthin was extracted using supercritical CO2. Optimal conditions for spray-drying were evaluated through the design of experiments and standard least squares regression (feed rate: 5.8 mL/min, spray gas flow: 400 NL/h, inlet temperature: 180 °C). Maximal astaxanthin recoveries were yielded using high-pressure homogenization and lyophilization (85.4%). All combinations of milling or high-pressure homogenization and lyophilization or spray-drying resulted in similar recoveries. Bead milling and spray-drying repeated with a larger spray-dryer resulted in similar astaxanthin recoveries compared with the laboratory scale. Smaller astaxanthin recoveries after the extraction of vacuum-dried biomass were mainly attributed to textural changes. Evaluation of these results in an economic context led to a recommendation for bead milling and spray-drying prior to supercritical CO2 extraction to achieve the maximum astaxanthin recoveries.

Bio-Availability, Anticancer Potential, and Chemical Data of Lycopene: An Overview and Technological Prospecting

The purpose of this review was to collect relevant chemical data about lycopene and its isomers, which can be extracted using different non-polar or polar aprotic solvents by SC-CO₂ or biosynthesis as a friendly technique. Lycopene and other carotenoids can be identified and quantified by UV–Vis and HPLC using a C18 or C30 column, while their characterization is possible by UV–Vis, Fluorescence, FTIR, MS, NMR, and DSC assays. Among these techniques, the last four can compare lycopene isomers and identify cis or all-trans-lycopene. FTIR, MS, and NMR techniques are more suitable for the verification of the purity of lycopene extracts due to the signal complexity generated for each isomer, which enables identification by subtle differences. Additionally, some biological activities of lycopene isolated from red vegetables have already been confirmed, such as anti-inflammatory, antioxidant, and cytotoxic activity against cancer cells, probably by activating several pathways. The encapsulation of lycopene in nanoparticles demonstrated an improvement in oral delivery, and ex vivo assessments determined that these nanoparticles had better permeation and low cytotoxicity against human cells with enhanced permeation. These data suggest that lycopene has the potential to be applied in the food and pharmaceutical industries, as well as in cosmetic products.

Enhancing the bioaccessibility of lycopene from tomato processing byproducts via supercritical carbon dioxide extraction

Tomato peel and seed from tomato processing industry are treated as waste; however, they contain lycopene, a high-value bioactive compound. In this study, lycopene was extracted from tomato peel and seed using supercritical carbon dioxide (SC–CO₂) and hexane, and the bioaccessibilities of lycopene in the SC-CO₂- and hexane-extracted oleoresins were investigated for the first time. The (Z)-lycopene content of the SC-CO₂-extracted oleoresin (69%) was higher than that of hexane-extracted oleoresin (45%). Separation of the insoluble fraction from the oleoresins increased the (Z)-lycopene contents of the SC-CO₂- and hexane-extracted oil fractions to 80% and 49%, respectively. The bioaccessibility of total-lycopene in the oleoresins was increased by 3.3-fold via SC-CO₂ extraction, which was attributed to higher (Z)-lycopene content, and small-sized uniform distribution of lycopene in the oleoresin. SC-CO₂ extraction is not only a green method for extraction of bioactive compounds, but also has the potential to improve health benefits of bioactive compounds.

•

Lycopene-rich oleoresins were extracted from tomato processing byproducts.

•

Supercritical carbon dioxide (SC–CO₂) and hexane extractions were compared.

•

SC-CO₂ extraction increased the cis-lycopene content of the oleoresins up to 69%.

•

SC-CO₂-extracted oleoresins contained uniform well-dispersed lycopene.

•

The bioaccessibility of lycopene was enhanced by 3.3-fold by SC-CO₂ ext.

Application of E/Z-Isomerization Technology for Enhancing Processing Efficiency, Health-Promoting Effects, and Usability of Carotenoids: A Review and Future Perspectives

Carotenoids are naturally occurring pigments whose presence in the diet is beneficial to human health. Moreover, they have a wide range of applications in the food, cosmetic, and animal feed industries. As carotenoids contain multiple conjugated double bonds in the molecule, a large number of geometric (E/Z, trans/cis) isomers are theoretically possible. In general, (all-E)-carotenoids are the most predominant geometric isomer in nature, and they have high crystallinity and low solubility in various mediums, resulting in their low processing efficiency and bioavailability. Technological developments for improving the processing efficiency and bioavailability of carotenoids utilizing the Z-isomerization have recently been gaining traction. Namely, Z-isomerization of carotenoids induces a significant change in their physicochemical properties (e.g., solubility and crystallinity), leading to improved processing efficiency and bioavailability as well as several biological activities. For the practical use of isomerization technology for carotenoids, the development of efficient isomerization methods and an acute understanding of the changes in biological activity are required. This review highlights the recent advancements in various conventional and unconventional methods for carotenoid isomerization, such as thermal treatment, light irradiation, microwave irradiation, and catalytic treatment, as well as environment-friendly isomerization methods. Current progress in the improvement of processing efficiency and biological activity utilizing isomerization technology and an application development of carotenoid Z-isomers for the feed industry are also described. In addition, future research challenges in the context of carotenoid isomerization have been elaborated upon.

Evaluation of physico-chemical properties of tomato powder produced by an optimized freeze drying process

In this study, the physico-chemical properties of tomato powder produced by an optimized freeze drying process (FDP) were evaluated. With the lycopene content as the dependent variable, the optimum FDP conditions (i.e., thermal cracking time of 62 s, ascorbic acid addition amount [0.13%], and particle size [Dv90] of 163 μm) were obtained through response surface methodology (RSM). The results showed that the content of lycopene in the prepared tomato powder was higher than that in two commercial products. Aldehydes were the main components among 25 kinds of aromatic substances detected in tomato powder. The values of a * and a */b *, the hydration properties including water holding capacity (WHC) and oil binding capacity (OBC), and the content of total acid, ascorbic acid, and soluble solids were improved compared to commercial spray dried and freeze dried samples. All the above results suggested that FDP was an adequate procedure for the production of high-quality tomato powder.

Astaxanthin Z-isomer-rich diets enhance egg yolk pigmentation in laying hens compared to that in all-E-isomer-rich diets

The effects of feeding diets containing astaxanthin with different Z-isomer ratios to laying hens on egg qualities, such as astaxanthin concentration in egg yolk and yolk color, were investigated. As the astaxanthin source, a natural microorganism Paracoccus carotinifaciens was used. Astaxanthin with different Z-isomer ratios was prepared by thermal treatment with different conditions and then added to the basal diet at a final astaxanthin concentration of 8 mg/kg. We found that, as the Z-isomer ratios of astaxanthin in the diet increased, the astaxanthin concentration in egg yolk and the yolk color fan score also increased significantly. Importantly, feeding a 50.6% Z-isomer ratio diet increased astaxanthin concentration in egg yolk by approximately fivefold and the color fan score by approximately 2 compared to that in hens fed an all-E-isomer-rich diet. Moreover, we showed that feeding Z-isomer-rich astaxanthin to laying hens increased plasma astaxanthin concentration by more than five times in comparison to that in hens fed an all-E-isomer-rich diet. These results indicate that Z-isomers of astaxanthin have higher bioavailability than that of the all-E-isomer and thus they exhibit greater egg yolk-accumulation efficiency.

Differences in bioavailability and tissue accumulation efficiency of (all-E)- and (Z)-carotenoids: A comparative study

This study investigated the differences in bioavailability and tissue accumulation efficiency between all-E- and Z-isomer-rich carotenoids after oral administration to rats. Three commercially important carotenoids (lycopene, β-carotene, and lutein) were chosen for the study. For all carotenoids, feeding with Z-isomer-rich diets increased their concentrations in plasma and tissues at least similar to or more than the all-E-isomer-rich diets, e.g., in rats fed a Z-isomer-rich lycopene, the lycopene concentrations in the plasma and liver after the 2-week administration were respectively 6.2 and 11.6 times higher than those fed an all-E-isomer-rich diet. These results strongly indicate that carotenoid Z-isomers have higher bioavailability and tissue accumulation efficiency than the all-E-isomers. Moreover, diets rich in carotenoid Z-isomers significantly improved the total Z-isomer ratio in plasma and several tissues compared to the all-E-isomers. Since carotenoid Z-isomers potentially have higher antioxidant activity than the all-E-isomers, their accumulation in the body might bring remarkable health benefits.

Enriched (Z)-lycopene in Tomato Extract via Co-Extraction of Tomatoes and Foodstuffs Containing Z-isomerization-accelerating Compounds

The aim of this study was to promote the Z-isomerization of lycopene in its extraction process from tomato pulp by adding foodstuffs containing Z-isomerization-accelerating compounds. The addition of onion, broccoli, mustard, makonbu (Saccharina japonica), or shiitake mushroom (Lentinus edodes) to the ethyl acetate extraction process significantly accelerated the Z-isomerization of lycopene. For example, when lycopene was extracted from tomato pulp at 70 °C without foodstuffs, the total Z-isomer ratio of lycopene in the extract was 38.4 ± 0.5%, whereas when onion, broccoli, mustard, makonbu, and shiitake mushroom were added to the process and the extraction was performed using the same procedure, the total Z-isomer ratios significantly increased to 53.6 ± 0.4, 47.9 ± 0.3, 48.2 ± 0.1, 41.5 ± 0.9, and 42.0 ± 1.2%, respectively. Since the above foodstuffs contain large amounts of carotenoid Z-isomerization-accelerating catalysts, i.e., polysulfides, isothiocyanates, or iodine, those components would promote Z-isomerization of lycopene in the extraction process. Since lycopene Z-isomers potentially have higher bioavailability and biological effects than the all-E-isomer, lycopene extraction with foodstuffs having a Z-isomerization-promoting effect in ethyl acetate should enhance the health benefits of tomato extracts.

Evaluation and improvement of storage stability of astaxanthin isomers in oils and fats

Astaxanthin Z-isomers potentially have greater bioavailability and biological activity than (all-E)-astaxanthin. However, the stability of the Z-isomers is lower than the all-E-isomer, which is a serious problem affecting its practical use. In this study, we investigated the impacts of different suspension media (oils and fats) and additives on astaxanthin isomer stability and identified suitable ones for astaxanthin stabilization. The evaluations showed that several vegetable oils and antioxidants significantly improved astaxanthin isomer stability, e.g., when soybean and sunflower oils were used as the suspension medium, astaxanthin isomers were hardly degraded; however the total Z-isomer ratio decreased from ~80% to ~50% during 6-week storage at 30 °C. Moreover, it was revealed that (9Z)-astaxanthin showed higher stability than the 13Z- and 15Z-isomers. Hence, to maintain astaxanthin concentration and the Z-isomer ratio over long periods, it is important to use suitable suspension mediums and antioxidants, and select a Z-isomerization method that increases (9Z)-astaxanthin ratio.

Synergistic Effects of Food Ingredients and Vegetable Oils on Thermal Isomerization of Lycopene

Recent investigations have demonstrated that some food ingredients and vegetable oils, such as onion, garlic, and sesame oil, enhanced thermal Z-isomerization of (all-E)-lycopene in tomatoes. However, the synergistic effects of these ingredients and oils have not yet been investigated. This study aims at clarifying how the combined use of lycopene Z-isomerization-promoting food ingredients and vegetable oils impacts thermal Z-isomerization of (all-E)-lycopene in tomato puree. Apart from a few exceptions, when olive oil was used as a reaction medium, the combined use of garlic, cabbage, broccoli, shiitake mushroom, and makonbu improved the total Z-isomer ratio of lycopene after heating compared to the separate use of the tested ingredients. However, when onion was used together with the other ingredients, the Z-isomer ratio significantly decreased compared to its individual use. Moreover, when garlic, cabbage, broccoli, shiitake mushroom, and makonbu were used with sesame and mustard oils, that exhibit higher Z-isomerizationpromoting effect than that of olive oil, the lycopene Z-isomerization reaction was further enhanced. However, when onion was combined with these oils, the Z-isomer ratio decreased compared to that measured upon the combined use of onion with olive oil. Our results on these synergistic effects are not only important for the food and drink manufacturing industries but also for daily home cooking.

The determination of lycopene Z-isomer absorption coefficient on C30-HPLC

Both E- and Z-isomers of lycopene are encountered in nature. Although they were separated on C30-HPLC by the mobile phase consisting of CH3CN-MeOH (A) and MTBE (B), the quantification of Z-isomers cannot be archived at present because either their commercially available reference samples are currently lacking, or they are unstable. In this study, both the specific and molar absorption coefficients of 5, 9, and 13 Z-isomers in the mobile phase were determined on the analytical C30-HPLC-PDA-ELSD, and further verified on the preparative C30-HPLC-PDA. The specific and molar absorption coefficients of 5, 9, and 13 Z-isomers were finally verified to be A 1 cm 1 %  = 3,422 and ε mol = 183,717, A 1 cm 1 %  = 2,183 and ε mol = 117,199, and A 1 cm 1 %  = 1,119 and ε mol = 60,076, respectively, in the mobile phase. With these determined coefficients, the quantifications of 5, 9, and 13 Z-isomers were able to be archived on C30-HPLC-PDA with the mobile phase applied in this investigation.

Biological Activities of Z-Lycopenes Contained in Food

Mono-(5Z)-, -(9Z)-, and -(13Z)-lycopenes are found in food containing processed tomato products, while tetra-Z-(7Z, 9Z, 7'Z, 9'Z)-lycopene (prolycopene) is found in tangerine-strain tomatoes. We prepared pure mono-Z-lycopenes from all-E-lycopene via chemical reaction (heating in CH₂Cl₂ at 80℃ for 1 h) followed by purification using preparative silica gel HPLC, while prolycopene was isolated from tangerine tomatoes by partitioning with n-hexane and 90% MeOH followed by silica gel column chromatography. A simple method of distinguishing the mono-Z-lycopenes using the ¹³C NMR chemical shifts of their Z-methyl carbons is proposed. Additionally, the ¹O₂ quenching and 3T3-L1 cell differentiation activities of the compounds were then compared with all-E-lycopene for the first time. All the evaluated Z-isomers showed ¹O₂ quenching activities that were equal to or slightly lower than that of all-E-lycopene, with the IC₅₀ values for the ¹O₂ quenching activities of (all-E)-, (5Z)-, (9Z)-, (13Z)-, and (7Z, 9Z, 7'Z, 9'Z)-lycopene being 4.4±0.36, 4.0±1.44, 5.3±1.08, 6.9±1.67, and 8.7±0.34 µM, respectively. The mouse 3T3-L1 cell differentiation activities followed the order: (all-E) > (9Z) > (5Z) ≈ (9Z) ≈ (13Z) ≈ (7Z, 9Z, 7'Z, 9'Z).

Production of (Z)-Lycopene-Rich Tomato Concentrate: A Natural Catalyst-Utilized and Oil-Based Study for Practical Applications

Since lycopene Z-isomers exhibit greater bioavailability and biological activity than the naturally occurring all-E-isomer, efficient manufacturing methods for (Z)-lycopene-rich materials are urgently needed. Herein, a method was developed for Z-isomerization of (all-E)-lycopene in tomato oleoresin using heat treatment and a natural catalyst, viz. allyl isothiocyanate (AITC). For practical application of this isomerization technology, no organic solvents were used, and instead, oils and fats were used as the reaction medium. The Z-isomerization of (all-E)-lycopene was promoted by heating (>120 °C) even when oil and fat media were used. Allyl isothiocyanate enhanced thermal Z-isomerization and improved the (5Z)-lycopene content, which shows higher biological activity compared to the other Z-isomers. The thermal isomerization efficiency with AITC was further improved by using certain vegetable oils such as argan and olive oils. In addition, the storage stability of (Z)-lycopene-rich tomato concentrates dispersed in olive oil was evaluated. The total Z-isomer ratio and lycopene concentration decreased with longer storage periods, and it was revealed that (5Z)-lycopene showed excellent storage stability among the mono-Z-isomers.

Kinetic and Thermodynamic Study of the Thermally Induced (E/Z)-Isomerization of the retro-Carotenoid Rhodoxanthin

The hitherto scarcely investigated retro-carotenoid rhodoxanthin possesses high potential for coloration in the food and beverage industry using technofunctional formulations prepared thereof. Hence, we studied (E/Z)-isomerization pathways of rhodoxanthin, including seven (E/Z)-isomers comprising (Z)-configured double bonds at unusual exocyclic and inner polyene chain positions. A mathematical approach was developed to deduce kinetic and thermodynamic parameters of six parallel equilibrium reactions interconnecting (all-E)-rhodoxanthin with mono-, di-, and tri-(Z)-isomers using multiresponse modeling. At 40-70 °C in ethyl acetate, reaction rate constants regarding the rotation from (all-E)- to (6Z)-rhodoxanthin were 11-14 times higher than those of the common (E/Z)-isomerization reaction at C-13,14 of the non-retro-structured carotenoid canthaxanthin. Moreover, the equilibrium reaction between (all-E)- and (6Z)-rhodoxanthin was strongly product favored as indicated by negative Gibbs energies (-1.6 to -2.2 kJ mol^-1), which is unusual for carotenoids within the studied temperatures. Overall, this study provides novel insights into structure-related dependencies of (E/Z)-isomerization reaction kinetics and thermodynamics of polyenes.

Isomerization of Commercially Important Carotenoids (Lycopene, β-Carotene, and Astaxanthin) by Natural Catalysts: Isothiocyanates and Polysulfides

Effects of natural catalysts, isothiocyanates and polysulfides, on Z-isomerization and decomposition of (all-E)-carotenoids (lycopene, β-carotene, and astaxanthin) after heat treatment were investigated. When isothiocyanates were added to (all-E)-carotenoid solutions and heated, Z-isomerization and decomposition of carotenoids were enhanced and the degree differed depending on the isothiocyanate type. Interestingly, when polysulfides were applied in the same manner, in addition to promoting the Z-isomerization reaction, they markedly improved the thermal stability of carotenoids. Successively, we investigated the reaction characteristics of allyl isothiocyanate (AITC) and diallyl disulfide (DADS) using (all-E)-lycopene; that is, effects of the amount added, solvent used, and reaction temperature and time, as well as the combination use on Z-isomerization and decomposition of lycopene, were investigated. With increases in the amount added and reaction temperature and time, Z-isomerization of lycopene was promoted for both catalysts. The high-temperature treatment tests clearly showed that AITC induced thermal decomposition of lycopene, whereas DADS improved the lycopene stability. Moreover, the simultaneous use of AITC and DADS resulted in a synergetic effect on the Z-isomerization efficiency.

Improved Carotenoid Processing with Sustainable Solvents Utilizing Z-Isomerization-Induced Alteration in Physicochemical Properties: A Review and Future Directions

Carotenoids—natural fat-soluble pigments—have attracted considerable attention because of their potential to prevent of various diseases, such as cancer and arteriosclerosis, and their strong antioxidant capacity. They have many geometric isomers due to the presence of numerous conjugated double bonds in the molecule. However, in plants, most carotenoids are present in the all-E-configuration. (all-E)-Carotenoids are characterized by high crystallinity as well as low solubility in safe and sustainable solvents, such as ethanol and supercritical CO₂ (SC-CO₂). Thus, these properties result in the decreased efficiency of carotenoid processing, such as extraction and emulsification, using such sustainable solvents. On the other hand, Z-isomerization of carotenoids induces alteration in physicochemical properties, i.e., the solubility of carotenoids dramatically improves and they change from a “crystalline state” to an “oily (amorphous) state”. For example, the solubility in ethanol of lycopene Z-isomers is more than 4000 times higher than the all-E-isomer. Recently, improvement of carotenoid processing efficiency utilizing these changes has attracted attention. Namely, it is possible to markedly improve carotenoid processing using safe and sustainable solvents, which had previously been difficult to put into practical use due to the low efficiency. The objective of this paper is to review the effect of Z-isomerization on the physicochemical properties of carotenoids and its application to carotenoid processing, such as extraction, micronization, and emulsification, using sustainable solvents. Moreover, aspects of Z-isomerization methods for carotenoids and functional difference, such as bioavailability and antioxidant capacity, between isomers are also included in this review.

Enhanced Z-isomerization of tomato lycopene through the optimal combination of food ingredients

In tomatoes, most lycopene is present in the all-E-configuration and shows very low bioavailability, whereas the Z-isomers show higher bioavailability. Hence, for health reasons, it is expected that the ingestion of lycopene Z-isomers is preferable. Very recently, it was reported that onion and possibly garlic promoted thermal Z-isomerization of (all-E)-lycopene but there are no reports for other food ingredients. Here we show new food ingredients that enhance thermal Z-isomerization of lycopene in tomatoes and from the results, we guessed some causative components having the Z-isomerization promoting effect. A comprehensive investigation of food ingredients revealed that some vegetables (Allium sp., Brassica sp., and Raphanus sp.), shiitake mushroom (Lentinus edodes), and some edible seaweeds (Saccharina sp. and Ecklonia sp.) markedly promoted Z-isomerization of (all-E)-lycopene in tomato puree with heating at 80 °C for 1 h. Moreover, it was revealed that polysulfides, isothiocyanates, carbon disulfide, and iodine, which were commonly contained in the above food ingredients in considerable quantity, enhanced thermal Z-isomerization of (all-E)-lycopene. Our findings on the food ingredients and the food-derived catalysts having a carotenoid Z-isomerization promoting effect are important, not only for the food, drink, and dietary supplement manufacturing industries, but also for daily home cooking.

Bioactive Compounds and Antioxidant Capacity of Rosa rugosa Depending on Degree of Ripeness

Maturity stage affects the bioactive compounds as well as the antioxidant capacity in the fruit. This study was designed to identify and quantify carotenoids, as well as to evaluate vitamin E, vitamin C, antioxidant capacity and total phenolic compounds of Rosa rugosa hips at different degrees of ripeness. HPLC (high performance liquid chromatography) analysis showed different types of carotenoids at different stages of maturity of R. rugosa hips with significant differences (p ˂ 0.05), where the maximum concentration was observed at late harvesting. In the hips investigated, only α-tocopherol was detected, the maximum concentration of both vitamin E and vitamin C was obtained in the orange hips with significant difference (p ˂ 0.05). On the other hand, the highest hydrophilic and lipophilic TEAC (Trolox equivalent antioxidant capacity) values, as well as total phenolic contents, were determined in the mature hips (red colour) with significant difference (p < 0.0001) and (p < 0.001) respectively, whereas ORAC (oxygen radical absorbance capacity) showed lower activity in the mature hips with significant difference (p ˂ 0.05). Late harvesting is recommended if a high content of carotenoids is desired, while harvesting should be carried out earlier if a higher vitamin E and vitamin C content is desired, which in turn affects the antioxidants capacity.

Lycopene-rich extract from red guava (Psidium guajava L.) displays cytotoxic effect against human breast adenocarcinoma cell line MCF-7 via an apoptotic-like pathway

This study investigated a lycopene-rich extract from red guava (LEG) for its chemical composition using spectrophotometry, mass spectrometry, attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR), and computational studies. The cytotoxic activity of LEG and the underlying mechanism was studied in human breast adenocarcinoma cells (MCF-7), murine fibroblast cells (NIH-3T3), BALB/c murine peritoneal macrophages, and sheep blood erythrocytes by evaluating the cell viability with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method and flow cytometry. Spectrophotometry analysis showed that LEG contained 20% of lycopene per extract dry weight. Experimental and theoretical ATR-FTIR suggests the presence of lycopene, whereas MS/MS spectra obtained after fragmentation of the molecular ion [M]+• of 536.4364 show fragment ions at m/z 269.2259, 375.3034, 444.3788, and 467.3658, corroborating the presence of lycopene mostly related to all-trans configuration. Treatment with LEG (1600 to 6.25μg/mL) for 24 and 72h significantly affected the viability of MCF-7 cells (mean half maximal inhibitory concentration [IC50]=29.85 and 5.964μg/mL, respectively) but not NIH-3T3 cells (IC50=1579 and 911.5μg/mL, respectively). Furthermore LEG at concentrations from 800 to 6.25μg/mL presented low cytotoxicity against BALB/c peritoneal macrophages (IC50≥800μg/mL) and no hemolytic activity. LEG (400 and 800μg/mL) caused reduction in the cell proliferation and induced cell cycle arrest, DNA fragmentation, modifications in the mitochondrial membrane potential, and morphologic changes related to granularity and size in MCF-7 cells; however, it failed to cause any significant damage to the cell membrane or display necrosis or traditional apoptosis. In conclusion, LEG was able to induce cytostatic and cytotoxic effects on breast cancer cells probably via induction of an apoptotic-like pathway.