Application of nano-encapsulated olive leaf extract in controlling the oxidative stability of soybean oil

Sustainable ultrasound-assisted thyme oil extraction: Harnessing thyme residue for enhanced recovery of bioactive compounds

Thyme essential oil (TEO), rich in distinct bioactivities, is extensively used in the food and pharmaceutical industries. This study uniquely integrates green ultrasound-assisted extraction (UAE) of TEO, with sustainable bioactive recovery from thyme residues. Nine ultrasound treatments with varying amplitude (40, 60 and 80 %) and time (20, 40, 60 min) were applied. The extracted TEO was analysed for yield (%), chemical composition (GC-MS), antioxidant, and antimicrobial activity. The treatment A3T1 (80 % amplitude, 20 min) came out to be the most favourable treatment with maximum yield of 1.76 % and 4.21 % for oil and bioactives, respectively. Oil demonstrated strongest antioxidant and antimicrobial activity which was supported by GC-MS profiling. For nanoencapsulation of TEO and bioactives, gum arabic offered better encapsulation characteristics with higher EE (80.13 % and 76.33 %), particle size (310 nm and 284 nm), and zeta potential (-21.1 mV and - 26.4 mV) respectively, confirmed by DSC and FTIR, making it the best option for preserving and enhancing bioactive and thyme oil qualities.

Effects of plant-derived antioxidants to the oxidative stability of edible oils under thermal and storage conditions: Benefits, challenges and sustainable solutions

The stability of edible oils significantly influences their quality, safety, and shelf life. While synthetic antioxidants have traditionally been used, the growing consumer interest in food safety and sustainability has shifted focus towards natural alternatives. Plant-derived antioxidants offer a promising solution, enhancing oxidative stability while meeting clean-label demands. This review examines recent advancements in using plant-derived antioxidants, such as extracts, essential oils, and agro-industrial by-products, to inhibit lipid peroxidation and improve edible oils' oxidative and thermal stability. Natural antioxidants from peels, seeds, spices, fruits, and vegetables effectively reduce hydrolysis, polymerization, and secondary oxidation products. Despite their potential, challenges remain, including impacts on sensory attributes, regulatory compliance, and the need for standardized extraction and application protocols. Addressing these limitations can advance sustainable food preservation and encourage the integration of natural antioxidants in the food industry, contributing to a more sustainable economy and shelf life.

Application of polyphenols as natural antioxidants in edible oils: Current status, antioxidant mechanism, and advanced technology

Oxidation of edible oil, especially those rich in polyunsaturated fatty acids, remains an inevitable problem. Since synthesis antioxidants may have some side effects, countries have been encouraging the development of natural alternatives. Polyphenols are natural compounds demonstrating notable potential in mitigating oil oxidation, but the effectiveness of polyphenols in inhibiting oil oxidation seems to be influenced by their antioxidant mechanisms, components, solubility, and application forms. To promote polyphenol application in oils, the present study aims to provide a comprehensive summary of the antioxidant mechanism of polyphenols in vitro, the common polyphenols employed to inhibit oil oxidation, and the pivotal technologies for incorporating polyphenols with low-fat solubility into oils including esterification modification, co-extraction of polyphenols and oils, nano-emulsion, microcapsules, and oleogels. In addition, a strengths, weaknesses, opportunities, and threats analysis of polyphenol application in oil was conducted. This review will provide a guidance for the application of polyphenols in oils.

Glycation-mediated pea protein isolate-curcumin conjugates for uniform walnut oil dispersion: enhancing oxidative stability and shelf life

BACKGROUND

Traditional methods for fabricating protein-polyphenol conjugates have not preserved the structural and functional integrity essential for the food industry effectively. This research introduces an advanced encapsulation methodology designed to overcome these limitations, with the potential to enhance the stability of edible oil matrices significantly, leading to improved preservation techniques and extended shelf life.

RESULTS

Glycated pea protein isolate-curcumin conjugates (gPPI-CUR) were developed, demonstrating a marked improvement in the oxidative stability of walnut oil (WO), a proxy for edible oil matrices. Characterized by a Z-average diameter of 158.37 nm and an encapsulation efficiency of 80.94%, these conjugates demonstrated exceptional performance in reducing lipid oxidation and aldehyde formation. Molecular docking analysis confirmed the formation of robust bonds with curcumin, thereby amplifying antioxidant activity. The uniform distribution of gPPI-CUR throughout the walnut oil matrix, as validated by confocal microscopy, ensured sustained bioactivity and mitigated the risk of localized oxidation. Electron spin resonance spectroscopy corroborated the superior antioxidant properties of the conjugates, which translated into a substantial 19-day increase in the shelf-life of the oil.

CONCLUSION

The gPPI-CUR conjugates enhanced the oxidative stability of walnut oil significantly, as demonstrated by the increased shelf life and reduced lipid oxidation. This study introduced an effective encapsulation method that improved the stability and extended the shelf life of edible oils, aligning with consumer demands for high-nutrition food products. The results indicate that the gPPI-CUR conjugates could serve as a promising antioxidant strategy for food preservation, offering a practical approach to enhance food quality and safety. © 2025 Society of Chemical Industry.

Curcumin: A Magical Small Molecule with a Large Role in Active-Intelligent Degradable Food Packaging

Curcumin exhibits antioxidant, antibacterial, antitumor, and anti-inflammatory biological properties. Its dual functionality as both a food additive and a pH-sensitive colorant has led to extensive applications in meat products and other food systems, thereby garnering significant research interest. In recent years, curcumin-loaded active-intelligent food packaging films have emerged as a promising innovation due to their multifunctional capabilities: not only do they prevent microbial contamination and extend food shelf life, but they also enable real-time freshness monitoring through visual colorimetric responses. This paper first delineates the molecular structure and fundamental biological mechanisms of curcumin. Subsequently, it systematically reviews the strategies for curcumin incorporation (including encapsulation techniques and composite formulations) and advanced fabrication methodologies for developing active-intelligent biodegradable films. Finally, the current applications of curcumin in polymer-based smart packaging systems are critically analyzed, with prospective research directions proposed to address existing technological limitations.

Oxidative Stability of Sunflower Oil: Effect of Blending with an Oil Extracted from Myrtle Liqueur By-Product

Myrtle oil extracted from the spent berries of myrtle liqueur production, using 2-methyltetrahydrofuran, was used to increase the oxidative stability of sunflower oil (SFO). Three blending ratios (5%, 10%, and 15% w/w) and the SFO without any addition were subjected to forced aging conditions at 70 °C for 21 days. The changes in peroxide value (PV), p-anisidine value (AV), total oxidation value (totox), and conjugated dienes and trienes were evaluated during forced aging. The oxidative stability of the blends was also assessed by the spin trapping method coupled with Electron Paramagnetic Resonance spectroscopy. Myrtle oil at 5% provided the best results, increasing the oxidative stability of SFO by reducing the PV and slowing the onset of secondary oxidation products, as measured by the AV and conjugated trienes. The 15% blend, despite its high levels of PV, AV, conjugated dienes, and trienes during storage, protects SFO from oxidation. The blends of SFO with unconventional oils, like myrtle oil, could represent a sustainable approach to increase its oxidative stability during storage.

Oil/water interface behavior of hesperidin methylchalcone and its application in nano-emulsions

The behavior of hesperidin methylchalcone (HMC) at the oil/water interface was examined through experimental and molecular simulation methods, and a nano-emulsions based on HMC was subsequently fabricated. The findings indicated that HMC spontaneously aggregated at the oil-water interface, leading to a reduction in interfacial tension and an increase in interfacial thickness. Furthermore, its glycoside and benzene ring showed tendencies to interact with water and medium-chain triglyceride, respectively. The HMC addition amount (w), homogenization times (n) and homogenization pressure (p) significantly influenced the formation of the nano-emulsions. The nano-emulsion with an oil-droplet size of 277.26 ± 13.62 nm was obtained at w = 1.0 %, p = 200 bar, and n = 6. When compared to the Tween 20 nano-emulsion, the HMC nano-emulsion demonstrated superior storage stability, antioxidant activity, and lutein bioaccessibility. It could achieve the slow release of HMC. These findings not only broaden the application range of HMC but also contribute to the advancement of functional nano-emulsions.

Co-encapsulation of borage seed oil and peppermint oil blends within ultrasound-assisted soy protein isolate/purity gum ultra complex nanoparticles: Fabrication, structural interaction mechanisms, and in vitro digestion studies

This study aimed at co-encapsulating borage seed oil (BSO)- and peppermint oil (PO) blends in ultrasound-assisted complex nanoparticles stabilized by soy protein isolate (SPI) and purity gum ultra (PGU) in different ratios: SPI/PGU-1:0 (NP1), 0:1 (NP2), 1:1 (NP3), 1:3 (NP4), and 3:1 (NP5). The BSO- and PO-loaded SPI/PGU complex nanoparticles (BP-loaded SPNPs) coded as NP4 (SPI-PGU-1:3) revealed a zeta potential of -33.27 mV, a PDI of 0.14, and the highest encapsulation efficiency (81.38 %). The main interactions observed among SPI, PGU, BSO, PO, and a blend of BSO and PO, as determined by FTIR and molecular docking, involved hydrophobic effects, electrostatic attraction, and H-bonding. These interactions played crucial roles in the production of BP-loaded SPNPs. XRD results validated the alterations in the structure of BP-loaded SPNPs caused by varying proportions of SPI and PGU. The thermal capacity of BP-loaded SPNPs (NP4), as determined by TGA, exhibited the lowest amount of weight loss compared to other BP-loaded SPNPs. Morphological results revealed that NP4 and NP5 exhibited a spherical surface and two distinguishable layers, indicating successful coating of PGU onto the droplet surface. In addition, BP-loaded SPNPs (NP4) exhibited a higher antioxidant effect due to their improved progressive release and prolonged release of co-encapsulated BSO and PO during in vitro digestion. The comprehensive investigation of the co-encapsulation of BSO and PO in complex nanoparticles, dietary supplements, and double-layered emulsified systems provides valuable insights into the development of functional foods.

Optimization of Instant Beverage Powder Containing Propolis Extract Nanoliposomes

Propolis is a natural resinous complex mixture produced by honeybees that contain various bioactive compounds. However, these bioactive compounds are chemically unstable and their absorption in the gastrointestinal tract is influenced by their solubility and stability. Encapsulation technology has been employed to increase their bioavailability and protect them against hostile conditions. Nanoliposomes are nanoscale lipid-based vesicles that can encapsulate various bioactive compounds, including propolis extracts. Therefore, in this study, propolis extract was encapsulated by nanoliposome technique and used in instant drink formulation. Nanoliposome characterization was done regarding particle size (255 ± 0.21 nm), zeta potential (-37.6 ± 1.14 mV), and encapsulation efficiency (73.71 ± 0.94). Response surface methodology (RSM) was employed to determine the effect of nanoliposome concentration (0%-5%) on the beverage characteristics including Brix, acidity, hygroscopicity, water solubility index, total phenol content, total microbial count, and sensory analyses. RSM predicted that a 3.19% nanoliposome would provide the overall optimum region for preparing the beverage with the best characteristics. Therefore, nanoliposome containing propolis can be successfully used in the enrichment of the beverage formulation by maintaining the sensory characteristics and improving its quality.

Improving the oxidative stability of butter oil with nanoencapsulated Ferulago angulata essential oil during accelerated shelf-life storage

This experiment aimed to encapsulate Ferulago angulata essential oil (FEO) into the zein nanofibers through an electrospinning approach and evaluate their application in retarding the lipid oxidation of butter oil during accelerated shelf-life storage. The main constituents of FEO were α-pinene (35.08%), followed by limonene (21.85%) and ɣ-terpinene (8.03%), respectively. Based on the results of scanning electron microscopy, the obtained electrospun nanofibers were cylindrical, uniformly disordered network structures with smooth surfaces and good continuity. The study findings showed that zein + FEO 1% and zein + FEO 1.5% nanofiber mats had better inhibitory effects to improve the oxidative stability of butter oil during accelerated storage for 24 days compared to the samples enriched with butylated hydroxytoluene 100 mg/Kg (P < 0.05). At the end of the study period, the peroxide value, thiobarbituric acid-reactive substances, p-anisidine value, and acid value of treated butter oils with zein + FEO 1% and zein + FEO 1.5% nanofiber mats were in the range of 0.79-1.03 meq oxygen/Kg, 0.35-0.45 MDA/Kg, 1.36-1.66, and 0.53-0.65 mg KOH/g, respectively.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-05980-8.

Improving the efficacy of phenolic extract from Pimpinella affinis in edible oils through nanoencapsulation: Utilizing chitosan and Salvia macrosiphon gum as coating agents

In the present study, a phenolic extract derived from the Pimpinella affinis plant underwent nanoencapsulation. The nanoencapsulation process employed chitosan, Salvia macrosiphon gum (SMG), and a chitosan-SMG complex (1:1) (CCS) as coating agents. The evaluation of nanoemulsions encompassed measurements of particle size, polydispersity index (PDI), ζ-potential, encapsulation efficiency, and intensity distribution parameters. The overall results of these assessments indicated that the nanoemulsion coated with CCS exhibited the most favorable characteristics when compared to other treatments. Subsequently, this specific nanoencapsulated sample was utilized to enhance the oxidative stability of canola oil at concentrations of 100, 200, and 300 ppm (parts per million). Oxidative stability tests, assessed through the total oxidation value (TOTOX) index, highlighted the superior performance of the nanoencapsulated extract, particularly at a concentration of 300 ppm. This enhancement can be attributed to the increased release of phenolic compounds from the CCS coating into the canola oil. The findings illustrate that the nanoencapsulation process can significantly enhance the efficacy of P. affinis extract in improving the oxidative stability of canola oil.

Apple pectin-based active films to preserve oil: Effects of naturally branched phytoglycogen-curcumin host

Pectin has excellent film-forming properties, but its functional properties need to be enhanced. Therefore, we constructed naturally branched phytoglycogen (PG) nanoparticles to solubilize curcumin (CCM) and further enhance the properties of apple pectin-based active films. The size of the PG spherical particles ranged from 30 to 100 nm with some aggregates. The branch density of the PG was 6.02 %. These PG nanoparticles increased the solubility of CCM nearly 1742-fold and a nanosized phytoglycogen-curcumin (PG-CCM) host was formed via hydrogen bonding and hydrophobic interaction. This host promoted the formation of pectin-based films with a dense structure and increased their tensile strength to 23.51 MPa. The coefficient to water vapor permeability, oxygen permeability and carbon dioxide permeability were all decreased indicating their barrier performance were improved. Among them, the oxygen permeability coefficient decreased most, from 1.14 × 10-7 g·m-1·s-1 to 0.8 × 10-7 g·m-1·s-1. Also, the transmittance of the active film at 280 nm and 660 nm decreased to 0.65 % and 72.10 %. Antioxidant and antibacterial properties were significantly enhanced (P < 0.05). And the results showed this film was an excellent oil packaging material. The active film incorporating PG-CCM host can replace heat-sealed plastic bags/pouch made from polyethylene and polypropylene synthetic plastics, and solve the problem that plastic packaging is difficult to degrade and cannot be squeezed clean. This provides a new conceptual framework for developing pectin-based active films by incorporating of PG and CCM.

Valorization of saffron (Crocus sativus L.) stigma as a potential natural antioxidant for soybean (Glycine max L.) oil stabilization

Synthetic antioxidants are known for their efficiency to improve vegetable oil oxidative stability. But owing to their harmful effects on human health, edible oil industry is seeking for safe and healthy natural antioxidants. The present work was setup with the aim of improving soybean oil (SO) oxidative stability by using saffron (Crocus sativus L.) stigmas collected in Morocco. Saffron stigmas were used as a natural antioxidant at various concentrations (0.2, 0.3, and 0.6%) in soybean oil compared to tocobiol (0.3%) as a synthetic antioxidant (the positive control). Performances of such natural and synthetic antioxidants were evaluated by measuring oil basic quality indices under accelerated storage at 60 °C for 12 weeks. Such indices consisted of free fatty acids (FFA), peroxide value (PV), anisidine value (p-AV), total oxidation value (TOTOX), UV extinction coefficients (K232 and K270), fatty acids composition (FA), and iodine value (IV). The obtained data show that there were significant (p < 0.05) increases in FFA, PV, p-AV, K232, K270, and TOTOX but no much variations were observed for FA and IV especially in saffron stigmas fortified oils across storage times. However, in the case of oils fortified with saffron stigmas at different doses, such an increase was of a lesser magnitude (for FFA, PV, p-AV, K270, and TOTOX) as compared to tocobiol. These outcomes were confirmed by principal component analysis with strong positive correlations (p < 0.001) among FFA, PV, p-AV, K232, K270, and TOTOX. The most important, for which determination coefficient R2 > 0.9, were modeled through simple regressions. In conclusion, saffron stigmas with the different doses performed better than the positive control (tocobiol) regardless of the storage time. It could be concluded that saffron stigmas are a promising natural antioxidant, alternative to synthetic antioxidants, to enhance the oxidative stability of edible oils.

Fabrication of double nano-emulsions loaded with hyssop (Hyssopus officinalis L.) extract stabilized with soy protein isolate alone and combined with chia seed gum in controlling the oxidative stability of canola oil

The aim of this study was to encapsulate hyssop (Hyssopus officinalis L.) extract obtained through ultrasound-assisted cold plasma pretreatment extraction within a double emulsion stabilized by soy protein isolate alone (SPI) and combined with chia seed gum (CSG) in the external aqueous phase on the stabilization of canola oil. FTIR analysis verified that there were electrostatic interactions between CSG and SPI. The SPI/CSG-stabilized emulsion demonstrated lower viscosity, smaller droplets, higher ζ-potential, and encapsulation efficiency compared to the SPI-stabilized emulsion. Non-Newtonian, pseudoplastic behaviors were shown by emulsions. Also, according to the dynamic rheological parameters (G' and G''), the SPI/CSG-stabilized emulsion had elastic behavior with weak gel properties. The antioxidant activity of the encapsulated extract at 1500 ppm during the storage in canola oil was investigated and compared to unencapsulated extract and TBHQ. The results showed that oil containing encapsulated extract had lower oxidative alterations than the unencapsulated form.

Microencapsulated polyphenol extracts from Georgia-grown pomegranate peels delay lipid oxidation in salad dressing during accelerated and ambient storage conditions

Lipid oxidation is a major cause of quality deterioration in salad dressings. This study evaluated the effect of incorporating microencapsulated polyphenol extracts via spray drying from pomegranate peels (MPP) to delay lipid oxidation in Italian-style salad dressings (ISD) during accelerated (55°C) and ambient (25°C) storage conditions. ISDs, prepared at high (5000 rpm) and low (250 rpm) shear rates conditions, were formulated with unencapsulated polyphenol extracts from pomegranate peels (PPP), MPP, and/or grape seed extract (GSE). Lipid oxidation in ISDs was evaluated by measuring peroxide value (PV), iodine value (IV), and TBARS, stored in accelerated and ambient conditions for 21 days and 8 weeks, respectively. Tannis in extracts were measured via HPLC-DAD and the total hydrolyzable tannin content of PPP and MPP was 283.09 and 427.74 (mg/g extract), respectively. Condensed tannins were not detected in PPP and MPP but were found in GSE (348.53 mg/g extract). Salad dressings prepared at high shear rates had significantly (p < .05) higher emulsion stability than those homogenized at low shear rates. Mixing conditions did not affect the lipid oxidative stability of IDSs. Salad dressing stored under accelerated storage had higher lipid oxidation (higher PV, lower IV, and higher TBARS) after 21 days than IDSs stored under ambient conditions for 8 weeks. ISDs prepared with MPPP showed significantly (p < .05) lower lipid oxidation than the other ISDs at the end of the shelf life studies. Results from the accelerated storage suggested that incorporating MPP could have extended the shelf life of IDSs by 20% compared to using unencapsulated polyphenol extracts. The study demonstrated that MPP delays lipid oxidation in ISDs during storage more effectively than unencapsulated extracts. MPP may serve as a natural and effective functional food ingredient for controlling lipid oxidation in high-lipid and acidified foods.

Foam-templated oleogels constructed by whey protein isolate and xanthan gum: Multiple-effect delivery vehicle for Antarctic krill oil

To address the limitations of Antarctic krill oil (AKO) such as easy oxidation, unacceptable fishy flavor and low bioaccessibility of astaxanthin in it, a multiple-effect delivery vehicle for AKO is needed. In this study, whey protein isolate (WPI) and xanthan gum (XG) were utilized to construct AKO into oleogels by generating foam-templates. The effects of the concentration of XG on the properties of foam, cryogel and the corresponding oleogels were investigated, and the formation mechanism of oleogel was discussed from the perspective of the correlation between foam-cryogel-oleogel. The results demonstrated that with the increase of the concentration of XG, the foam stability was improved, the cryogel after freeze drying had a more uniform network structure and superior oil absorption ability, and the corresponding oleogel had excellent oil holding ability after oil absorption. The AKO oleogels showed superior oxidative stability compared with AKO. The in vitro digestion experiments demonstrated that the bioaccessibility of the astaxanthin in this oleogel was also considerably higher than that in AKO. In addition, this oleogel had masking effect on the odor-presenting substances in AKO, while retaining other flavors of AKO. The foam-templated oleogel can be considered as a multiple-effect vehicle for AKO to facilitate its application in food products. This study provides theoretical basis and data support for the development and utilization of novel vehicle for AKO, broadening the application of AKO in the field of food science.

Enhancing canola oil's shelf life with nano-encapsulated Mentha aquatica extract for optimal antioxidant performance

Incorporation of antioxidants, such as phenolic compounds into edible oils has limitations such as rapid release of phenolic compounds, low solubility, low penetration, low accessibility, and rapid degradation by environmental compounds. To solve this problem, the nano-encapsulation process is offering promising opportunities. In this research, for the first time, the phenolic extract of Mentha aquatica was nano-encapsulated in nano-emulsions coated with chitosan, Lepidium perfoliatum gum (LPG), and complex of chitosan and LPG (CCL) (1:1 ratio). Based on various tests (particle size measurement, ζ-potential, polydispersity index, encapsulation efficiency index, and intensity curve), the LPG coating was the most optimum option for nano-encapsulation compared to the other coatings. Thus, the LPG-assisted nano-encapsulated phenolic extract of M. aquatica was used to improve the oxidative stability of canola oil at three concentrations (100, 200, and 300 ppm). The results of peroxide value and anisidine index tests (as initial and secondary oxidation indicators, respectively) showed that the nano-encapsulation improved the antioxidant effect of M. aquatica when compared with free extract in canola oil. In a comparative approach, the best sample was obtained from the LPG-assisted nano-encapsulated extract (200 ppm) due to the release of more phenolic compounds. The findings from this study showcase how nano-encapsulation enhances the efficacy of antioxidants in edible oils.

In situ extraction/encapsulation of olive leaves antioxidants in zein for improved oxidative stability of edible oils

This study presents a sustainable and cost-effective method for preserving the bioactivity of phenolic compounds in olive leaves (OLE) during their application. The extraction and nanoencapsulation of OLE were performed in a single-step process using a rotor-stator system with zein as the encapsulating agent. The nanoprecipitation step was carried out using an aqueous sodium caseinate solution, resulting in spherical particles with an average diameter of about 640 nm, as confirmed by Transmission Electron Microscopy. Thermal characterization showed that the produced nanoparticles were more thermally stable than free OLE until 250 °C, and FTIR spectra indicated effective interaction between the phenolic compounds and zein. Antioxidant activity was evaluated using TBARS, DPPH, ABTS, and FRAP assays, with results showing that encapsulated OLE had lower antioxidant activity than free OLE. The best antioxidant capacity results were determined by TBARS assay, with IC50 results equal to 43 and 103 µgOLE/mL for free and encapsulated OLE, respectively. No anti-inflammatory potential was detected for both samples using the RAW 264.7 model, and only free OLE showed cytotoxic activity against lung cancer and gastric carcinoma. Encapsulated and free OLE were used as antioxidants in soy, palm, and palm kernel oils and compared to BHT using Rancimat. The Schaal Oven Test was also performed, and the PARAFAC chemometric method analyzed the UV-Vis spectra, which revealed high stability of the oil when 300 mg or the nanoparticles were added per kg oil. Results suggested that zein-encapsulated olive leaf antioxidants can improve the oxidative stability of edible oils.

Effects of free and encapsulated Siah-e-Samarghandi grape seed extract on the physicochemical, textural, microbial, and sensorial properties of UF-Feta cheese

The current study was conducted to elucidate the impact of grape seed extract (SE) and microencapsulated seed extract (MSE) addition to UF-Feta cheese. The SE was encapsulated in maize starch, alginate, and canola oil using the emulsion technique. The SE and MSE characteristics were evaluated. The products were subjected to physicochemical (pH, titrable acidity, color, texture, and sensory properties), microbiological analysis (starter count), and lipid oxidation test (proxide, acid degree, and ansidine value) during 60 days of storage. The main phenol component in the SE was catechin (419.04 mg/L), gallic acid (319.63 mg/L), and chlorogenic acid (4.19 ± 0.002 mg/L). The antioxidant value was 157.80 mg/L. The MSE was elliptical in shape with a 24.29 μm diameter. The efficiency of microencapsulation was 53.86%. The addition of SE and MSE had no significant effect on pH and acidity, but lipolysis decreased based on acid degree value (0.7%; p > .05). The increasing trend of peroxide values was 172.54%, 145.68%, and 118.75% for C, SE, and MSE samples, respectively, and 35.68%, 32.28%, and 17.24% for the P-anisidine values during the storage time. Therefore, fat oxidation was reduced in the supplemented cheese. Nevertheless, the supplemented cheese had limited color alterations. The MSE and SE did not affect the survival rates of the starter count. The SE and MSE had a less rigid structure. The hardness (2748.0 g) and chewiness (57.45 mJ) values in SE cheese had the greatest value among the samples. All sensory parameters were lowest in MSE cheese. In short, encapsulation showed suitable properties for SE to apply in UF-Feta cheese.

Effect of heat treatment on phenolic composition and radical scavenging activity of olive leaf extract at different pH conditions: a spectroscopic and kinetic study

BACKGROUND

The present study focused on the effect of isothermal treatment (5-90 °C) and pH (2.0-6.0) of aqueous olive leaf phenolic extract solutions on the kinetics of degradation of single and total phenolic compounds and radical scavenging activity, with the objective of predicting and optimizing the thermal treatments in foods enriched with olive leaf extracts.

RESULTS

The major compound, oleuropein, showed higher degradation at low pH 2.0 and temperature-dependent reaction rates, which fitted well a first-order kinetic model, with an estimated activation energy of 98.03 ± 0.08 kJ mol^-1 . Oleuropein hydrolysis resulted in a zero-order increase in hydroxytyrosol concentration at same pH (E_a  = 71.59 ± 1.5 kJ mol^-1 ), whereas a 100-fold slower degradation rate was observed at higher pH. Verbascoside was only degraded at pH 6.0, also following first-order kinetics. These changes in oleuropein and hydroxytyrosol concentrations led to significant changes in fluorescence maximum intensities centered around 315 and 360 nm and in the 425-500 nm spectral zone for samples at pH 6.0, which could be associated with verbacoside degradation. Conversely, analysis of total phenolic content and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity showed little changes, indicating a rather constant overall reducing capacity of the resulting pool of compounds after thermal treatments.

CONCLUSION

The present study can contribute to the knowledge related to oleuropein and phenolic fraction degradation as a result of matrix (pH) and processing. The kinetic parameters obtained could be applied for predicting and optimizing the thermal treatments in foods and drinks enriched with olive leaf extracts. © 2022 Society of Chemical Industry.

Evaluation of antioxidant properties of nanoencapsulated sage (Salvia officinalis L.) extract in biopolymer coating based on whey protein isolate and Qodumeh Shahri (Lepidium perfoliatum) seed gum to increase the oxidative stability of sunflower oil

Sage leaf extract (SLE) is considered an excellent source of bioactive compounds mainly because of its high content of phenolics, widely known as natural antioxidants. This study aimed to compare the performance of free/encapsulated SLE by different coatings in protecting sunflower oil against oxidative deterioration. The coating materials were whey protein isolate and qodumeh seed gum at different ratios (1:0, 1:1, and 0:1). Each nanocapsule was analyzed for particle size, zeta potential, encapsulation efficiency, phenolics release, and SEM images. The total phenolic compounds of SLE were 31.12 mg GA/g. The antioxidant activity of SLE was increased in both DPPH and FRAP assays by increasing extract concentration from 50 to 250 ppm. All nanoparticles exhibited nanometric size, negative zeta potential, encapsulation efficiency higher than 60%, and gradual release during storage. The oxidative stability of sunflower oil with or without the incorporation of 250 ppm of free/encapsulated SLE was evaluated during 24 days of storage at 60°C. Peroxide value (PV), thiobarbituric acid value (TBA), oxidative stability index (OSI), color index (CI), and conjugated dienes (CD) were determined. COPM nanoparticles showed the lowest PV, TBA, CI, and CD but both SGUM and WHEY were more effective in delaying oil oxidation than TBHQ and free extract. Higher OSI was observed in oil-containing nanoparticles with composite coating. Results obtained reinforce the use of whey protein isolate and qodumeh seed gum as a coating for encapsulating SLE to increase the shelf life of sunflower oil as a natural antioxidant.

Oxidative stability of sunflower and soybean oils enriched with black plum peel extract in comparison with synthetic antioxidants

Black plum peel is the by-product of plum processing and is a valuable source of antioxidants and phenolic compounds. In this research, total phenolic compounds, total flavonoid content and antioxidant activity of black plum peel were measured. After that, black plum peel extract (in concentrations 0, 400, 800, 1200 and 2000 ppm) as a natural antioxidant for improving the stability of soybean and sunflower oil was used. The oxidative stability parameters of oils (peroxide value, free fatty acids, thiobarbituric acid, conjugated dienes, and carbonyl value) were measured at 60 °C for 4-16 days. Antioxidant activity, total phenolic compounds and total flavonoid content of black plum peel were 86.87% and 100.53 mg GA /g and 871.062 mg Quercetin/g respectively. Black plum peel extract could have a significant positive effect (P<0.05) on improvement of the quality and stability parameters of soybean oil and sunflower oil. The oxidative stability parameters for commercial oils and samples containing black plum peel extract were near each other and in an acceptable range. So, black plum peel is recommended as an oxidative stabilizer of oils and alternative synthetic antioxidants.

Recent Advances in Health Benefits of Bioactive Compounds from Food Wastes and By-Products: Biochemical Aspects

Bioactive compounds, including terpenoids, polyphenols, alkaloids and other nitrogen-containing constituents, exert various beneficial effects arising from their antioxidant and anti-inflammatory properties. These compounds can be found in vegetables, fruits, grains, spices and their derived foods and beverages such as tea, olive oil, fruit juices, wine, chocolate and beer. Agricultural production and the food supply chain are major sources of food wastes, which can become resources, as they are rich in bioactive compounds. The aim of this review is to highlight recent articles demonstrating the numerous potential uses of products and by-products of the agro-food supply chain, which can have various applications.

First report on quality and purity assessment of sweet almond oil in Brazilian body oils by gas chromatography and mass spectrometry

Sweet almond oil is a raw material with high-added value used in different products. Then, the aim of this study is to evaluate the quality and purity of 10 body oils based on sweet almond oils currently available in the Brazilian market. Fatty acid composition and triacylglycerol (TAG) profile were determined by gas chromatography with flame ionization detector (GC-FID) and atmospheric solids analysis probe mass spectrometry (ASAP-MS), respectively. The authenticity of samples was assessed using an analytical curve equation. Soybean oil was chosen as the adulterant because it is the cheapest vegetable oil commercialized in Brazil. Hierarchical clustering analysis (HCA) in conjunction with ASAP-MS classified product samples according to the type of vegetable oil (soybean and sweet almond oils). The addition of soybean oil (8.79% to 99.70%) was confirmed in samples. However, only two samples stated in their label the presence of soybean oil as an ingredient. These findings highlight the need for better oversight by regulatory bodies to ensure that consumers acquire high quality and authentic products based on equally high quality and purity of sweet almond oils.

Valorizing the usage of olive leaves, bioactive compounds, biological activities, and food applications: A comprehensive review

Olive oil production is a significant source of economic profit for Mediterranean nations, accounting for around 98 percent of global output. Olive oil usage has increased dramatically in recent years, owing to its organoleptic characteristics and rising knowledge of its health advantages. The culture of olive trees and the manufacture of industrial and table olive oil produces enormous volumes of solid waste and dark liquid effluents, involving olive leaves, pomace, and olive oil mill wastewaters. These by-products cause an economic issue for manufacturers and pose major environmental concerns. As a result, partial reuse, like other agronomical production wastes, is a goal to be achieved. Because these by-products are high in bioactive chemicals, which, if isolated, might denote components with significant added value for the food, cosmetic, and nutraceutical sectors, indeed, they include significant amounts of beneficial organic acids, carbohydrates, proteins, fibers, and phenolic materials, which are distributed differently between the various wastes depending on the olive oil production method and table olive agronomical techniques. However, the extraction and recovery of bioactive materials from chosen by-products is a significant problem of their reasonable value, and rigorous detection and quantification are required. The primary aims of this review in this context are to outline the vital bioactive chemicals in olive by-products, evaluate the main developments in extraction, purification, and identification, and study their uses in food packaging systems and safety problems.

Effect of Natural Antioxidants from Fruit Leaves on the Oxidative Stability of Soybean Oil during Accelerated Storage

Plant by-products are safe, sustainable, and abundant natural antioxidant sources. Here we investigated the antioxidant activity of a mixture of lyophilized pomegranate, guava, and grape (PGG) leaves water extract (1:1:1) and examined its ability to retard the rancidity of soybean oil during accelerated storage at 65 °C for 30 days. To achieve this, we evaluated the oxidative stability of soybean oil enriched with PGG extract at 200, 400, and 800 ppm. We also compared the effect of PGG extract with butylated hydroxytoluene (BHT) (400/100 ppm) with that of only BHT (200 ppm). We observed that 8.19 and 1.78 µg/mL of the extract could scavenge 50% of DPPH• and ABTS•, respectively, indicating its enhanced antioxidant activity. Enriching soyabean oil with the extract at 800 ppm improved its oxidative stability by reducing the acid value to 1.71 mg/g and the total oxidation to 99.87 compared to 2.27 mg/g and 150.32 in the raw oil, respectively. Moreover, PGG-800 ppm inhibited oxidation by 46.07%. Similarly, PGG-400 ppm reinforced BHT (100 ppm) to provide oxidative stability as BHT (p > 0.05), with TOTOX values of 87.93 and 79.23, respectively. PGG-800 ppm and PGG/BHT mix potently inhibited the transformation of polyunsaturated fatty acids into saturated ones. Therefore, the PGG extract might be an efficient substitute for BHT (partially or totally) during industrial processes.

Pilot-Scale Processing and Functional Properties of Antifungal EVOH-Based Films Containing Methyl Anthranilate Intended for Food Packaging Applications

Antimicrobial packaging has emerged as an efficient technology to improve the stability of food products. In this study, new formulations based on ethylene vinyl alcohol (EVOH) copolymer were developed by incorporating the volatile methyl anthranilate (MA) at different concentrations as antifungal compound to obtain active films for food packaging. To this end, a twin-screw extruder with a specifically designed screw configuration was employed to produce films at pilot scale. The quantification analyses of MA in the films showed a high retention capacity. Then, the morphological, optical, thermal, mechanical and water vapour barrier performance, as well as the antifungal activity in vitro of the active films, were evaluated. The presence of MA did not affect the transparency or the thermal stability of EVOH-based films, but decreased the glass transition temperature of the copolymer, indicating a plasticizing effect, which was confirmed by an increase in the elongation at break values of the films. Because of the additive-induced plasticization over EVOH, the water vapour permeability slightly increased at 33% and 75% relative humidity values. Finally, the evaluation of the antifungal activity in vitro of the active films containing methyl anthranilate showed a great effectiveness against P. expansum and B. cinerea, demonstrating the potential applicability of the developed films for active food packaging.

When Natural Compounds Meet Nanotechnology: Nature-Inspired Nanomedicines for Cancer Immunotherapy

Recent significant strides of natural compounds in immunomodulation have highlighted their great potential against cancer. Despite many attempts being made for cancer immunotherapy, the biomedical application of natural compounds encounters a bottleneck because of their unclear mechanisms, low solubility and bioavailability, and limited efficacy. Herein, we summarize the immune regulatory mechanisms of different natural compounds at each step of the cancer-immunity cycle and highlight their anti-tumor potential and current limitations. We then propose and present various drug delivery strategies based on nanotechnology, including traditional nanoparticles (NPs)-based delivery strategies (lipid-based NPs, micelles, and polysaccharide/peptide/protein-based NPs) and novel delivery strategies (cell-derived NPs and carrier-free NPs), thus providing solutions to break through existing bottlenecks. Furthermore, representative applications of nature-inspired nanomedicines are also emphasized in detail with the advantages and disadvantages discussed. Finally, the challenges and prospects of natural compounds for cancer immunotherapy are provided, hopefully, to facilitate their far-reaching development toward clinical translation.

Practical application of nanoencapsulated nutraceuticals in real food products; a systematic review

In recent decades, due to the increase in awareness, most consumers prefer foods that not only satisfy their primal urge of hunger but also include health-promoting effects on the body. Therefore, the food industry has an increasing tendency to apply the nutrients (like vitamins, essential fatty acids and minerals) and replace synthetic additives with natural bioactives (like phenolics and essential oils) to produce functional products. However, low dispersibility and shelf-stability as well as presenting unpleasant taste and odor are the most critical barriers for direct incorporation of these useful compounds into foods. In this context, nanoencapsulation has been proposed as a relatively new solution to overcome the mentioned limitations. However, fewer studies have focused on incorporating the bioactive-loaded nanocarriers into the food matrices. This study intends to help the development of functional food production by doing an exhaustive review on the incorporation of nanoencapsulated ingredients into the real food system and resulted interaction of nanocarriers and food products. According to the literature, incorporation of the nanoencapsulated bioactive ingredients into foods can be effectively used to enhance their stability during the processing and storage stage and their bioavailability as well as to delay lipid oxidation and microbial growth in food, without negatively affecting physicochemical, organoleptic and qualitative properties. However, some published results to date declared that food matrix might adversely affect the bioavailability and antimicrobial activity of nanoencapsulated ingredients. It seems that further studies are required to contribute to the choice of appropriate healthy ingredients and wall materials for incorporating into a given food structure.

Optimization of Emulsification and Microencapsulation of Balangu (Lallemantia royleana) Seed Oil by Surface Response Methodology

Balangu (Lallemantia royleana) seed oil is a valuable source of omega-6 fatty acids that reduces the risk of cardiovascular diseases. Due to the high sensitivity of this oil to environmental factors, microencapsulation has been recommended to preserve valuable compounds of oils and prevent adverse environmental effects. In this study, the oil of balangu seeds was extracted using a combination of ultrasound and shaking incubation and was microencapsulated using an emulsification method. The process was optimized using the response surface methodology (RSM). For this purpose, the effect of three independent variables such as chitosan concentration (0–1.5%), sodium alginate concentration (0–4.5%), and pH (3–7) on emulsification and microencapsulation condition was analyzed. The results showed that the optimal conditions for emulsification and microencapsulation included 0.30% chitosan, 0.14% sodium alginate, and pH 3. Scanning electron microscopy (SEM) showed that the structure of the optimal sample was smooth, spherical, and without cracks, which confirms the success of emulsification and microencapsulation processes.

Evaluation of antioxidant activity of nano- and microencapsulated rosemary (Rosmarinus officinalis L.) leaves extract in cress (Lepidium sativum) and basil (Ocimum basilicum) seed gums for enhancing oxidative stability of sunflower oil

There has been interest in the use of plant extract as a natural preservative agent for improving the oxidative stability of vegetable oils. However, plant extracts have low stability against heat and environmental stress. In this study, the antioxidant potential of nano- and microencapsulated Rosmarinus officinalis L. extract (RE) obtained using the ultrasonication method was measured. The total phenolic and flavonoid content of the extract was 174.4 ± 25.9 mg gallic acid/g extract and 78.30 ± 3.2 mg rutin/g extract, respectively. Antioxidant activity of 50, 100, 200, and 400 ppm of RE was measured by DPPH free radical scavenging methods, ferric reduction assay, and β-carotene/linoleic acid assay, and then compared to the 100 ppm of TBHQ as a common synthetic antioxidant. The results showed that the antioxidant activity increased with increasing the concentration of the extract in all evaluating methods. The antioxidant activity of 200 ppm of the free and encapsulated extract in cress (Lepidium sativum) and basil (Ocimum basilicum) seed gums at different ratios (1:0, 1:1, and 0:1) was compared to sunflower oil without antioxidants, and oil-containing TBHQ which was stored at 60°C for 24 days. The oxidation indexes of oil samples include peroxide value, thiobarbituric acid value, and p-anisidine value measured at 4-day intervals. A lower oil oxidation was observed in oil-containing nanoencapsulated extract followed by microencapsulated extract, free extract, and TBHQ. Since producing nanoencapsulated RE requires a higher time and speed of homogenization and due to no statistically significant difference between the antioxidant properties of nanocapsules and microcapsules in oil, the use of microcapsules of RE in basil seed gum to increase the shelf life of sunflower oil is recommended.

Study on the antioxidative mechanism of tocopherol loaded ethyl cellulose particles in thermal-oxidized soybean oil

Our previous study proposed preparation method of tocopherol (Toc) loaded ethyl cellulose (EC) particles as antioxidant due to instability of Toc under high temperature. The present study aimed to explore the antioxidant mechanism of loaded particles. Results showed that loaded particles prepared by EC of different viscosities (EC9, EC70, EC200) had antioxidative effect, and the antioxidant activity increased with EC viscosity. Fourier transform infrared analysis demonstrated that the interaction between EC and tocopherol was mainly hydrogen bond. Loaded particles retained effectively the thermal degradation of Toc and thus enhanced the antioxidant activity. Further investigation into thermal oxidation of EC inferred the possible antioxidative mechanism included two aspects. One was that Toc was fixed in the network structure of loaded particles formed by EC to provide a barrier for avoiding degradation. Another was that EC and Toc acted on different stages of lipid oxidation, playing the antioxidative effect together.

Innovative and Sustainable Technologies to Enhance the Oxidative Stability of Vegetable Oils

To meet consumers’ demand for natural foods, edible oil producers and food processing industries are searching for alternatives to synthetic antioxidants to protect oils against oxidation. Antioxidant compounds extracted from different plant parts (e.g., flowers, leaves, roots, and seeds) or sourced from agri-food industries, including residues left after food processing, attract consumers for their health properties and natural origins. This review, starting from a literature research analysis, highlights the role of natural antioxidants in the protection of edible oils against oxidation, with an emphasis on the emerging and sustainable strategies to preserve oils against oxidative damage. Sustainability and health are the main concerns of food processing industries. In this context, the aim of this review is to highlight the emerging strategies for the enrichment of edible oils with biomolecules or extracts recovered from plant sources. The use of extracts obtained from vegetable wastes and by-products and the blending with oils extracted from various oil-bearing seeds is also pointed out as a sustainable approach. The safety concerns linked to the use of natural antioxidants for human health are also discussed. This review, using a multidisciplinary approach, provides an updated overview of the chemical, technological, sustainability, and safety aspects linked to oil protection.

Innovative Extraction Technologies for Development of Functional Ingredients Based on Polyphenols from Olive Leaves

Olive tree (Olea europea L.) leaves represent around 10% of the total weight of olives arriving at any given mill, which are generally discarded, causing economic and environmental issues. However, these are rich sources of natural bioactive compounds (i.e., polyphenols), which have health-promoting potential. Thus, the valorization of olive leaves by recovering and reusing their components should be a must for food sustainability and circular economy. This review provides an insight into the principal polyphenols present in olive leaves, together with agronomic variables influencing their content. It also summarizes the recent advances in the application of novel extraction technologies that have shown promising extraction efficacy, reducing the volume of extraction solvent and saving time and cost. Moreover, potential industrial uses and international patents filed in the pharmaceutic, food, and cosmetic sectors are discussed.

Alginate-based microparticles structured with different biopolymers and enriched with a phenolic-rich olive leaves extract: A physico-chemical characterization

Encapsulation of olive leaves extracts (OLE), rich of healthy components like Oleuropein, Hydroxytyrosol and Verbascoside, represents a new challenge to improve stability and nutritional value of food as well as a way to recover value added compounds from by-products, contributing to a more sustainable food system. In this context, OLE-loaded microbeads of Na alginate alone or in combination with Pectin, Na Caseinate or Whey protein isolates, were produced by emulsification internal ionotropic gelation. Encapsulation efficiency of the main phenolic compounds (Oleuropein, Hydroxytyrosol, Verbascoside) was carried out along with microparticles morphological characterization by scanning electron microscopy (SEM), thermal properties by differential scanning calorimetry (DSC) and color. Encapsulation efficiency resulted higher for Alginate/Pectin, whilst Alginate/Caseinate was the less performing system, probably due to the lower interaction with polyphenols. SEM revealed collapsed structures and continuous smooth surfaces for Alginate and Alginate/Pectin microbeads while more regular structures and porous surfaces were observed for Alginate/Caseinate and Alginate/Whey proteins. Higher hue angle and lower chroma values were observed for all the beads with respect to the pure extract, indicating a reduction of the yellow/brown color. DSC highlighted higher thermal stability for the microbeads in comparison to the original ingredients, showing also new thermal transitions related to bonds formation between polymers and OLE.

•

Verbascoside showed higher encapsulation efficiency compared to Oleuropein.

•

Alginate/Pectin was the most efficient system for encapsulation purposes.

•

Microstructural traits were linked to the encapsulation efficiency.

•

Thermal analysis revealed increased thermal stability of encapsulated polyphenols.

•

Encapsulation allowed a mitigation of the color properties of the olive leaf extract.