Optimization of encapsulation efficiency and average particle size of Hohenbuehelia serotina polysaccharides nanoemulsions using response surface methodology

The polysaccharide-based nanoemulsions: Preparation, mechanism, and application in food preservation-A review

The stability and bioavailability of antioxidant, antibacterial, and other bioactive substances could be improved through nanoemulsion systems, as a result, nanoemulsion technology has become popular in food preservation. Polysaccharides are green polymers, their renewability, richness, safety, and functionality determine broad application prospects. Polysaccharide-based nanoemulsion coatings with good waterproofness, and mechanical and biological properties are found to effectively prevent or delay water loss, respiration, gas exchange, and microbial corruption of fruits, vegetables, and meat products, and they will be an important innovative technology for sustainable development in the future. The structural and functional properties of polysaccharides that could stabilize nanoemulsions have been discussed, and the preparation methods, physicochemical properties, stability, and formation mechanism of nanoemulsions have been summarized in this review. In addition, the preparation methods of polysaccharide-based nanoemulsion coatings are summarized, the application and preservation mechanisms in fruits, vegetables, and meat products have been introduced, and future perspectives have been discussed. At present, the related researches mainly focus on the bactericidal activity and the sensory quality of food products, while the in-depth research is unclear, this review provides ideas for the subsequent research on polysaccharide-based nanoemulsions for food preservation.

Dual-Mechanism Gastroretentive Tablets with Encapsulated Gentian Root Extract

Background/Objectives: This study aimed to develop gastroretentive tablets based on mucoadhesive-floating systems with encapsulated gentian (Gentiana lutea, Gentianaceae) root extract to overcome the low bioavailability and short elimination half-life of gentiopicroside, a dominant bioactive compound with systemic effect. The formulation also aimed to promote the local action of the extract in the stomach. Methods: Tablets were obtained by direct compression of sodium bicarbonate (7.5%) and solid lipid microparticles (92.5%), which were obtained with lyophilizing double emulsions. A quality by design (QbD) was employed to evaluate the impact of formulation factors and processing parameters on emulsion viscosity, powder characteristics (moisture content, encapsulation efficiency, flowability), and tablet characteristics (floating lag time, gentiopicroside release, and assessment of dispersibility during in vitro dissolution). Results: The trehalose content and high-shear-homogenization (HSH) time of primary emulsion were critical factors. Trehalose content positively influenced emulsion viscosity, moisture content, floating lag time, encapsulation efficiency, and the release rate of gentiopicroside. HSH time positively affected powder stability and negatively gentiopicroside release. The selected powder had a high gentiopicroside encapsulation efficiency (95.13%), optimal stability, and good flowability. The developed tablets exhibited adequate floating lag time (275 s), mucoadhesive properties, and gentiopicroside biphasic release (29.04% in 45 min; 67.95% in 6 h). Furthermore, the optimal tablet formulation remained stable for 18 months and was primarily digested by duodenal enzymes. Conclusions: Dual-mechanism gastroretentive tablets with encapsulated gentian root extract were successfully developed. The in vitro digestion study demonstrated that the optimal formulation effectively resisted gastric enzymes, ensuring the release of its contents in the small intestine, even in the case of premature gastric evacuation.

Optimization, structural characterization, and biological applications of exopolysaccharide produced by Enterococcus faecium KT990028

The aim of this study was to select the best exopolysaccharide (EPS) producer among the Enterococcus strains to optimize, characterize, and evaluate its biological properties. Among the eleven strains, Enterococcus faecium KT990028 was selected, and the production conditions were optimized: 16.3 % (w/v) sucrose, 0.70 % (w/v) yeast extract, 8.3 % (w/v) reconstituted skimmed milk, at 38 °C in 15 h of incubation, producing 2.880 g/L of EPS. High performance anion exchange chromatography (HPAEC) analysis revealed that the molecular weight was 166.98 kDa. HPAEC, spectroscopy (FTIR), and nuclear magnetic resonance (1H NMR) analyses revealed that the EPS was a heteropolysaccharide composed of galactose (37.74 %), rhamnose (19.79 %), arabinose (17.71 %), glucose (9.50 %), fucose (7.93 %), and mannose (7.33 %). Scanning electron microscopy showed a three-dimensional microstructure in the form of decompressed plates, with wrinkles, and pores. By means of dynamic light scattering (DLS), the EPS showed an average size varying from 135.25 ± 10.56 nm and 410.60 ± 45.20 nm, as the concentration was increased from 0.5 mg/mL to 2.0 mg/mL, respectively. X-ray diffraction revealed that the EPS has an amorphous and crystalline nature, while thermogravimetric analysis indicated stability up to 400 °C. The antioxidant effect (5 mg/mL) against DPPH, ABTS, OH, and O2 was 64.50 ± 0.71 %, 47.50 ± 0.10 %, 68.36 ± 0.59 %, and 44.83 ± 0.86 %, respectively. It was also able to inhibit and biofilm disruption of Escherichia coli ATCC 25922 and Enterococcus faecalis ATCC 6057 and had an antimicrobial effect from 50 mg/mL for the strains of against Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Listeria monocytogenes ATCC 19117, Staphylococcus aureus ATCC 6538, and Enterococcus faecalis ATCC 6057. Cell cytotoxicity carried out using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay revealed that the EPS was safe and promoted the proliferation of Vero cells. Thus, the results indicated that the EPS from E. faecium KT990028 is a promising functional biopolymer for possible applications in the food and pharmaceutical fields.

Protective effect of water-soluble nervonic acid micro-powder coated with chitosan oligosaccharide and silk fibroin on hippocampal neuronal HT22 cells

Nervonic acid (NA) is an extremely long chain monounsaturated fatty acid that plays a crucial biological role in brain development and repair. However, its low solubility reduced bioavailability and limited its applications. In this study, spherical water-soluble nervonic acid composite micro-powder (NA-WM) was constructed by layer-by-layer self-assembly technology under electrostatic interaction and hydrogen bond, in which electronegative NA was used as the core material, and electropositive COS (Chitosan oligosaccharide) with neuroprotective properties and electronegative SF (Silk fibroin) with biocompatibility and anti-inflammatory synergism were used as the wall material. In the preparation process, the electronegative NA was first combined with electropositive COS by antisolvent method, and then the electropositive COS-NA complex was encapsulated with electronegative SF to form NA-WM. The optimal preparation conditions were screened and optimized via single-factor and BBD method. Under the optimum conditions, the average particle size of NA-WM was 420 ± 35 nm. The results of TGA (Thermogravimetric), SEM (Scanning electron microscopy), and FTIR (Fourier transform infrared spectroscopy) confirmed that NA-WM had good thermal stability and spherical-defined layer-to-layer structure. Additionally, at pH 1.5, the NA release rate of NA-WM was as high as 89.54 % within 2.5 h. Through measuring the levels of MDA (Malondialdehyde), CAT (Catalase), SOD (Superoxide dismutase), GSH-Px (Glutathione peroxidase), and LDH (Lactate dehydrogenase), as well as flow cytometry and SEM analysis, it was confirmed that NA-WM could protect Aβ1-42-induced HT22 by inhibiting oxidative stress and reducing mitochondrial membrane potential. This study provided data support for the development and application of NA.

Modified Cinnabaris-stabilized Pickering emulsions loaded with the essential oil of Acorus tatarinowii Schott: preparation, characterization and in vitro evaluation

Essential oil of Acorus tatarinowii Schott (ATEO) have significant biological activity, but their physical and chemical properties are unstable and susceptible to interference by external factors, resulting in oxidation, decomposition, and isomerization of essential oils (EOs), ultimately diminishing the quality of EOs and escalating clinical risks. In this research, based on the concept of " combination of medicine and adjuvant, " the unsuitable stabilizer Cinnabaris in Lingzhu powder prescription was modified with a SiO2 surface to become a stabilizer suitable for Pickering emulsion. The modified Cinnabaris was synthesized, with a focus on exploring the surface modification of Cinnabaris to facilitate its role as a stabilizer in Pickering emulsion. Thermal stability studies showed that modified Cinnabaris-stabilized emulsion had higher EOs retention and lower peroxide value and hydrogen peroxide content. GC-MS analysis showed that the volatile components in the emulsion were more stable than the EOs. In vitro dissolution experiments showed that in the dissolution medium of artificial gastric juice and artificial intestinal juice, compared with the ATEO, the release in Pickering emulsion was faster within 48 h, indicating that the ATEO had been encapsulated in Pickering emulsion, which could improve the in vitro dissolution rate of EOs. This study convincingly demonstrates the potential of modified Cinnabaris-stabilized Pickering emulsion to improve the thermal stability and in vitro dissolution rate of EOs.

Effects of folate-chicory acid liposome on macrophage polarization and TLR4/NF-κB signaling pathway in ulcerative colitis mouse

BACKGROUND

Chichoric acid (CA) is a major active ingredient found in chicory and Echinacea. As a derivative of caffeic acid, it has various pharmacological effects.

PURPOSE

Due to the unclear etiology and disease mechanisms, effective treatment methods for ulcerative colitis (UC) are currently lacking. The study investigated the therapeutic effects of the folate-chicory acid liposome on both LPS-induced macrophage inflammation models and dextran sulfate sodium (DSS)-induced mouse UC models.

METHODS

Folate-chicory acid liposome was prepared using the double emulsion ultrasonic method with the aim of targeting folate receptors specifically expressed on macrophages. The study investigated the therapeutic effects of the folate-chicory acid liposome on both LPS-induced macrophage inflammation models and DSS -induced mouse UC models. Furthermore, the effects of the liposomes on macrophage polarization and their underlying mechanisms in UC were explored.

RESULTS

The average particle size of folate-chicory acid liposome was 120.4 ± 0.46 nm, with an encapsulation efficiency of 77.32 ± 3.19 %. The folate-chicory acid liposome could alleviate macrophage apoptosis induced by LPS, decrease the expression of inflammatory factors in macrophages, enhance the expression of anti-inflammatory factors, inhibit macrophage polarization towards the M1 phenotype, and mitigate cellular inflammation in vetro. In vivo test, folate-chicory acid liposome could attenuate clinical symptoms, increased colon length, reduced DAI scores, CMDI scores, and alleviated the severity of colonic histopathological damage in UC mice. Furthermore, it inhibited the polarization of macrophages towards the M1 phenotype in the colon and downregulated the TLR4/NF-κB signaling pathway, thereby ameliorating UC in mice.

CONCLUSION

Folate-chicory acid liposome exhibited a uniform particle size distribution and high encapsulation efficiency. It effectively treated UC mice by inhibiting the polarization of macrophages towards the M1 phenotype in the colon and downregulating the TLR4/NF-κB signaling pathway.

Traditional Chinese medicine polysaccharide in nano-drug delivery systems: Current progress and future perspectives

Traditional Chinese medicine polysaccharides (TCMPs) have gained increasing attention in the field of nanomedicine due to their diverse biological activities and favorable characteristics as drug carriers, including biocompatibility, biodegradability, safety, and ease of modification. TCMPs-based nano-drug delivery systems (NDDSs) offer several advantages, such as evasion of reticuloendothelial system (RES) phagocytosis, protection against biomolecule degradation, enhanced drug bioavailability, and potent therapeutic effects. Therefore, a comprehensive review of the latest developments in TCMPs-based NDDSs and their applications in disease therapy is of great significance. This review provides an overview of the structural characteristics and biological activities of TCMPs relevant to carrier design, the strategies employed for constructing TCMPs-based NDDSs, and the versatile role of TCMPs in these systems. Additionally, current challenges and future prospects of TCMPs in NDDSs are discussed, aiming to provide valuable insights for future research and clinical translation.

A Perspective on Various Facets of Nanoemulsions and its Commercial Utilities

Nanotechnology is a captivating contemporary technology owing to its extensive range of potential applications. This study emphasizes nanomaterials, substances with a size <100 nm, offering better qualities than coarse particles. Nanoparticles have several advantages compared with conventional drug delivery methods, including enhanced bioavailability and a larger surface area because of their smaller particle size. These characteristics make the nanoparticles a viable clinical candidate. Controlled-release drug delivery systems and targeted drug delivery systems rely heavily on nanoparticles. Because traditional drug delivery methods fail to achieve targeted drug delivery, resulting in toxicity, low bioavailability, poor therapeutic outcomes, and so on, these drug nanoparticles excel in all these areas. Researchers are already interested in developing drug delivery systems such as niosomes, bilosomes, and dendrimers. Nanoemulsion is one of these technologies; nanoemulsions outperform traditional emulsions in terms of pharmacodynamics and pharmacokinetics. Nanoemulsion effectively surpasses the constraints of standard emulsions, primarily by offering enhanced bioavailability, reduced toxicity, improved absorption, and the potential to be used in targeted drug delivery or controlled-release drug delivery systems. This particular work explores several aspects of nanoemulsions, including their constituents, classification, techniques for preparation, criteria for assessment, commercial applications, and future prospects.

Structural and functional characterization of exopolysaccharide from Leuconostoc citreum BH10 discovered in birch sap

In this study, Leuconostoc citreum BH10, an endophytic strain, was isolated from aseptically collected xylem sap of birch for the first time, and its exopolysaccharide (LCEPS) production was up to 46.31 g/L in glucan producing medium. The produced LCEPS was purified to obtain two water-soluble fractions, named as LCEPS-1 and LCEPS-2, respectively. The major fraction LCEPS-1 was characterized to be comprised of glucose with average molecular weight of 6.34 × 106 Da. The structure of LCEPS-1 was investigated by spectroscopy analysis, which revealed that LCEPS-1 was identified with containing 90.45 % α-(1,6) linkages in the main chains and 9.55 % α-(1,3) branch linkages. The scanning electron microscope results demonstrated that the dried LCEPS-1 appeared porous surface overlaid with an irregular glittering. The water solubility index (WSI) and water holding capacity (WHC) of LCEPS-1 were 88.02 ± 1.69 % and 241.43 ± 6.38 %, respectively. Besides, it exhibited high thermal stability as well as fine antioxidant activities. Taken together, the results indicated that LCEPS-1 could have good potentiality to be applied in fields of foods, cosmetics, nutraceuticals and pharmaceutical industries as the natural agent.

Purification and characterization of a chicory polysaccharide and its application in stabilizing genistein for cancer therapy

Genistein is an isoflavone with chemopreventive and therapeutic effects on various types of cancers. Apparently, in contrast to the advantages of multi-target therapy, the poor water solubility of this molecule is a major obstacle to its clinical application. In this work, zein/chicory polysaccharide nanoparticles (G-zein-P NPs) were prepared by pH-induced antisolvent precipitation method for the encapsulation of genistein. Firstly, an acidic polysaccharide (CIP70-2) with a molecular weight of 66.7 kDa was identified from the roots of chicory (Cichorium intybus). This natural macromolecule was identified as a plant pectin, for which the structure included RG-I (rhamnogalacturonan I) and HG (homogalacturonan) regions. Using this polysaccharide, G-zein-P NPs were prepared, in which the water solubility of genistein was improved by encapsulation. The encapsulation efficiency and loading efficiency of genistein by composite nanoparticles reached 99.0 % and 6.96 %, respectively. In vitro tumor inhibition experiments showed that the inhibitory effect of G-zein-P NPs on HepG2 cells was twice that of unencapsulated genistein. Moreover, the significant inhibition of tumor development and metastasis by G-zein-P NPs was observed in zebrafish xenograft models. The results suggested that zein/chicory polysaccharide nanoparticles may be a promising delivery carrier for genistein application in cancer prevention and therapy.

Structural characterization and antioxidant activity of polysaccharides extracted from Porphyra haitanensis by different methods

This study was to investigate the structure and antioxidant activity of Porphyra haitanensis polysaccharides (PHPs) extracted by different methods, including water extraction (PHP), ultra-high pressure (UHP-PHP), ultrasonic (US-PHP) and microwave assisted water extraction (M-PHP). Compared with water extraction, the total sugar, sulfate and uronic acid contents of PHPs was enhanced by ultra-high pressure, ultrasonic and microwave assisted treatments, especially those of UHP-PHP were increased by 24.35 %, 12.84 % and 27.51 %, respectively (p < 0.05). Meanwhile, these assisted treatments affected the monosaccharide ratio of polysaccharides and significantly reduced the protein content, molecular weight as well as particle size of PHPs (p < 0.05), and resulted in a loose microstructure with more porosity and fragments. PHP, UHP-PHP, US-PHP, and M-PHP all possessed in vitro antioxidant capacity. Among them, UHP-PHP had the strongest oxygen radical absorbance capacity, DPPH and ·OH radicals scavenging capacity, which increased by 48.46 %, 116.24 %, and 14.98 % respectively. Moreover, PHPs particularly UHP-PHP effectively increased the cell viability and reduced ROS levels of H₂O₂ induced RAW264.7 cells (p < 0.05), indicating their good effects against cell oxidative damage. The findings suggested that PHPs with ultra-high pressure assisted treatments has the better potential to develop natural antioxidant.

Response Surface Methodology Optimization in High-Performance Solid-State Supercapattery Cells Using NiCo2S4–Graphene Hybrids

In this work, NiCo₂S₄–graphene hybrids (NCS@G) with high electrochemical performance were prepared using a hydrothermal method. The response surface methodology (RSM), along with a central composite design (CCD), was used to investigate the effect of independent variables (G/NCS, hydrothermal time, and S/Ni) on the specific capacitances of the NCS@G/Ni composite electrodes. RSM analysis revealed that the developed quadratic model with regression coefficient values of more than 0.95 could be well adapted to represent experimental results. Optimized preparation conditions for NCS@G were G/NCS = 6.0%, hydrothermal time = 10.0, and S/Ni = 6.0 of NCS@G (111) sample. The maximum specific capacitance of NCS@G (111)/Ni fabricated at the optimal condition is about 216% higher than the best result obtained using the conventional experimental method. The enhanced capacitive performance of the NCS@G (111) sample can be attributed to the synergistic effect between NCS nanoparticles and graphene, which has the meso/macropores conductive network and low diffusion resistance. Notably, the NCS@G (111) could not only provide numerous reaction sites but also prevent the restacking of graphene layers. Furthermore, a supercapattery cell was fabricated with an (G + AC)/Ni anode, a NCS@G (111)/Ni cathode, and a carboxymethyl cellulose–potassium hydroxide (CMC-KOH) gel electrolyte. The NCS@G (111)//(G + AC) demonstrates an outstanding energy density of 80 Wh kg⁻¹ at a power density of 4 kW kg⁻¹, and a good cycling performance of 75% after 5000 cycles at 2 A g⁻¹. Applying the synthesis strategy of RSM endows remarkable capacitive performance of the hybrid materials, providing an economical pathway to design promising composite electrode material and fabricate high-performance energy storage devices.

Physicochemical Characteristics of Mixed Surfactant-Stabilized l-Ascorbic Acid Nanoemulsions during Storage

The incorporation of l-ascorbic acid into food products is challenging for food industries due to its chemical instability. This study was conducted to develop a nanoemulsion-based effective colloidal system for the incorporation of l-ascorbic acid (LAA) in functional food products. l-ascorbic acid was encapsulated in nanoemulsions prepared through high-pressure homogenization. The physicochemical characteristics of mixed-surfactant-based LAA nanoemulsions were investigated during storage at different temperatures. The droplet size of LAA nanoemulsions after one month of storage varied in the range of 121.36-150.15 and 121.36-138.25 nm at 25 and 4 °C, respectively. These nanoemulsions remained stable against processing conditions such as heat treatments (10-70 °C), different salt concentrations (40-320 mM), change in pH (3-9), and four freeze-thaw cycles. The temperature and storage intervals have a significant (p < 0.05) effect on the retention of LAA in nanoemulsion-based delivery systems. The findings of this research work have important implications in the designing and preparation of an effective encapsulation system for the inclusion of l-ascorbic acid into functional food products.

Nanoencapsulation of Thyme Essential Oils: Formulation, Characterization, Storage Stability, and Biological Activity

This study aimed to improve the effectiveness of Thymus capitatus and Thymus algeriensis essential oils (EOs), as food preservatives, through their encapsulation in different delivery systems (DSs), namely nanoemulsions and biopolymeric nanoparticles. DSs’ preparation is tailored to enhance not only physical stability but also resulting Eos’ antioxidant and antibacterial activities through different fabrication methods (high-pressure homogenization emulsification or antisolvent precipitation) and using different emulsifiers and stabilizers. DSs are characterized in terms of droplet size distribution, ζ-potential, and stability over time, as well as antioxidant and antibacterial activities of encapsulated EOs. The antioxidant activity was studied by the FRAP assay; the antibacterial activity was evaluated by the well diffusion method. EOs of different compositions were tested, namely two EOs extracted from Thymus capitatus, harvested from Tunisia during different periods of the year (TC1 and TC2), and one EO extracted from Thymus algeriensis (TA). The composition of TC1 was significantly richer in carvacrol than TC2 and TA. The most stable formulation was the zein-based nanoparticles prepared with TC1 and stabilized with maltodextrins, which exhibit droplet size, polydispersity index, ζ-potential, and encapsulation efficiency of 74.7 nm, 0.14, 38.7 mV, and 99.66%, respectively. This formulation led also to an improvement in the resulting antioxidant (60.69 µg/mg vs. 57.67 µg/mg for non-encapsulated TC1) and antibacterial (inhibition diameters varying between 12 and 33 mm vs. a range between 12 and 28 mm for non-encapsulated TC1) activities of EO. This formulation offers a promising option for the effective use of natural antibacterial bioactive molecules in the food industry against pathogenic and spoilage bacteria.

Shea Butter Potentiates the Anti-Bacterial Activity of Fusidic Acid Incorporated into Solid Lipid Nanoparticle

Fusidic acid (FA) is an efficient anti-bacterial drug proven to be efficient against a wide range of bacteria. Nevertheless, the main restriction in its formulation is the limited solubility. To avoid such an obstacle, the drug is incorporated into the lipid core of the nanolipid formulation. Consequently, the present study was an attempt to formulate nanolipid preparation, mainly, solid lipid nanoparticle (SLN) integrating FA. FA-SLN was prepared using shea butter as a lipid phase owing to its reported anti-bacterial activity. Different FA-SLNs were fabricated using the central composite design (CCD) approach. The optimized formula was selected and integrated into a hydrogel base to be efficiently used topically. FA-SLN-hydrogel was evaluated for its character, morphology, in vitro release and stability. The formula was examined for irritation reaction and finally evaluated for its anti-bacterial performance. The optimized formula showed particle size 283.83 nm and entrapment 73.057%. The formulated FA-SLN-hydrogel displayed pH 6.2, viscosity 15,610 cP, spreadability 51.1 mm and in vitro release 64.6% following 180 min. FA-SLN-hydrogel showed good stability for three months at different conditions (room temperature and refrigerator). It exhibited no irritation reaction on the treated rats. Eventually, shea butter displayed a noteworthy effect against bacterial growth that improved the effect of FA. This would indicate prospective anti-bacterial activity of FA when combined with shea butter in SLN formulation as a promising nanocarrier.

Effects of ultra-high pressure treatment on structure and bioactivity of polysaccharides from large leaf yellow tea

In this study, the changes of structure and bioactivity of polysaccharides from large leaf yellow tea (LYTP) were investigated under ultra-high pressure (UHP). Native yellow tea polysaccharide were treatmented with ultra-high pressure (200, 400 and 600 MPa) for 5 min to yield yellow tea polysaccharide including 200 MPa-LYTP, 400 MPa-LYTP and 600 MPa-LYTP. It was found that the monosaccharide composition of LYTP changed significantly after the ultra-high pressure treatment. The molecular weight (Mw) of 200 MPa-LYTP (from 563.6 to 11.7 kDa), 400 MPa-LYTP (from 372.2 to 11.8 kDa) and 600 MPa-LYTP (from 344 to 11.6 kDa) sharply decreased upon ultra-high pressure treatment compared with LYTP (771.5 kDa), coincidentally particle size was also significantly reduced for 200 MPa-LYTP (23.2 %), 400 MPa-LYTP (40.2 %) and 600 MPa-LYTP (25.9 %). The results of the scanning electron microscope showed that ultra-high pressure also changed the surface and spatial morphology of LYTP. LYTP after ultra-high pressure treatment (UHP-LYTP) could further ameliorate alcohol-induced liver injury in mice. In addition, UHP treatment can more efficiently remove protein than the Sevages method. With the gradual removal of protein, its hepatoprotective effect increased. These findings demonstrated that UHP treatment could change the primary structure and spatial structure of LYTP, increase the content of acidic polysaccharides, and improve its bioactivity.

Spiky titanium dioxide nanoparticles-loaded Plantaginis Semen polysaccharide as an adjuvant to enhance immune responses

The purpose of this study was to prepare spiky titanium dioxide nanoparticles-loaded Plantaginis Semen polysaccharide (SN-TiO₂-PSP), and the structural characterization and immune response of infectious laryngotracheitis (ILT) vaccine in Hetian chickens were investigated. The structural characterization of SN-TiO₂-PSP was analyzed by FT-IR, TEM, and TGA analysis. And the immune organs indexes, lymphocytes proliferation, specific antibody levels, and ratios of CD4⁺ and CD8⁺ T lymphocytes were studied. Structural characterization results showed that SN-TiO₂-PSP has a typical polysaccharide absorption peak and good stability. The SN-TiO₂-PSP's shape was similar to sea urchin, and its zeta potential and particle size were 27.56 mV and 976.11 nm, respectively. In vivo results showed that SN-TiO₂-PSP could enhance the proliferation of peripheral lymphocytes, specific antibody levels, CD4⁺ and CD8⁺ T lymphocytes ratios, IL-4 and INF-γ levels in Hetian chickens vaccinated with ILT vaccine on D₇, D₁₄, D₂₁, and D₂₈. In addition, SN-TiO₂-PSP not only enhanced the indexes of immune organs but also promoted the development of immune organs. Therefore, SN-TiO₂-PSP has immune adjuvant activity and may become a new potential immune adjuvant.

Brucine-Loaded Ethosomal Gel: Design, Optimization, and Anti-inflammatory Activity

Brucine, one of the natural medications obtained from Nux vomica seeds, is used as an anti-inflammatory drug. Several investigations were performed to overcome its drawbacks, which will affect significantly its pharmaceutical formulation. The goal of the current investigation was to design, optimize, and evaluate the anti-inflammatory performance of BRU ethosomal gel. Brucineethosomal formulations were prepared using thin film hydration method and optimized by central composite design approach using three independent variables (lecithin concentration, cholesterol concentration, and ethanol percentage) and three response variables (vesicular size, encapsulation efficiency, and skin permeation). The optimized formulation was examined for its stability and then incorporated into HPMC gel to get BRU ethosomal gel. The obtained BRU-loaded ethosomal gel was evaluated for its physical properties, in vitro release, and ex vivo permeation and skin irritation. Finally, carrageenan-induced rat hind paw edema test was adopted for the anti-inflammatory activity. The developed BRU ethosomal gel exhibited good physical characteristics comparable with the conventional developed BRU gel. In vitro release of BRU from ethosomal gel was effectively extended for 6 h. Permeation of BRU from ethosomes was significantly higher than all formulations (p < 0.05), since it recorded steady state transdermal flux value 0.548 ± 0.03 μg/cm² h with enhancement ratio 2.73 ± 0.23. Eventually, BRU ethosomal gel exhibited potent anti-inflammatory activity as manifested by a significant decrease in rat hind paw inflammation following 24 h. In conclusion, the study emphasized the prospective of ethosomal gel as a fortunate carrier for intensifying the anti-inflammatory effect of Brucine.

Development, Optimization, and Evaluation of Luliconazole Nanoemulgel for the Treatment of Fungal Infection

The present study aimed to optimize luliconazole nanoemulsion using Box–Behnken statistical design, which was further incorporated into the polymeric gel of Carbopol 934. The formulation was characterized for its size, entrapment efficiency, ex vivo permeation, and mechanism of release. The size of the dispersed globules of the optimized drug-loaded nanoemulsion was found to be 17 ± 3.67 nm with a polydispersity index (PDI) less than 0.5. Although the surface charge was recorded at –9.53 ± 0.251, the stability was maintained by the polymeric matrix that prevented aggregation and coalescence of the dispersed globules. The luliconazole-nanoemulgel (LUL-NEG) was characterized for drug content analysis, viscosity, pH, and refractive index, where the results were found to be 99.06 ± 0.59%, 9.26 ± 0.08 Pa.s, 5.65 ± 0.17, and 1.31 ± 0.08, respectively. The permeation across the rat skin was found to be significantly higher with LUL-NEG when compared with LUL gel. Furthermore, the skin irritation test performed in experimental animals revealed that the blank NEG, as well as the LUL-NEG, did not produce any signs of erythema following 48 h exposure. In addition, the histopathological findings of the experimental skins reported no abnormal signs at the formulation application site. Finally, the NEG formulation was found to create a statistically significant zone of inhibition ( $P$  < 0.05) when compared to all other test groups. Overall, it could be summarized that the nanoemulgel approach of delivering luliconazole across the skin to treat skin fungal infections could be a promising strategy.

Extraction Optimization of Polysaccharides From Corn Silk and Their Antioxidant Activities in vitro and in vivo

Response surface technique was employed for improving the extraction of corn silk polysaccharides (CSP). Temperature, liquid-to-solid ratio, and per extraction time were all examined as separate factors. The optimal extraction parameters were determined by fitting experimental data to a second-order polynomial; a liquid-to-solid ratio of 21.5 ml/g, temperature equivalent to 88°C, and extraction time of 1.87 h. The experimental yield of the extracted polysaccharides following the application of these conditions was 4.33 ± 0.08% (dry weight), which fit quite well with the predicted value. CSP’s strong scavenging capabilities against hydroxyls, 1,1-diphenyl-2-picrylhydrazyl radicals, and superoxide anions along with its excellent reducing potential, were demonstrated in an in vitro antioxidant experiment. Meanwhile, in vivo testing revealed that CSP substantially enhanced glutathione peroxidase and superoxide dismutase activities. The Malondialdehyde levels in the liver and serum of aged mice also underwent a decrease. This study found that CSP has a substantial antioxidant potential in vitro and in vivo, suggesting that it might be used as an antioxidant in food and medicine.

pH-driven entrapment of enrofloxacin in casein-based nanoparticles for the enhancement of oral bioavailability

Enrofloxacin (ENR), a broad-spectrum antibacterial drug, has extremely poor water solubility contributing to low bioavailability, which prevents drug formulation design and limits its wide application in livestock farming and aquaculture. Compared to conventional formulations of ENR, casein (Cas)-based drug delivery system has been reported to have significant advantages in the improvement of solubility and bioavailability of drugs. In this paper, we report the preparation process of ENR-loaded Cas nanoparticles (ENR-Cas) using magnetic agitation without any organic agent and the optimization of the formulation. Transmission electron microscopy (TEM), dynamic light scattering (DLS), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR) were all adopted to characterize the ENR-Cas. Results showed that the obtained ENR-Cas were approximately spherical with a particle size of 171.6 ± 13.8 nm with a polydispersity index of 0.322 ± 0.053. In vitro release behavior of ENR-Cas showed a sustained release profile. Additionally, in vivo study in rats displayed that the mean plasma concentration of ENR after oral administration of ENR-Cas was significantly higher than that treated with ENR suspension. The mean residence time (MRT0-24) of ENR was enhanced by Cas nanoparticles from 9.287 ± 0.524 to 11.372 ± 1.139 hr in comparison with ENR suspension. Accordingly, the area under the curve (AUC0-24) of ENR-Cas was 80.521 ± 6.624 μg·hr/ml, 3.8-fold higher than that of ENR suspension (20.850 ± 1.715 μg·hr/ml). Therefore, it can be concluded that ENR-Cas enhanced the absorption, prolonged the retention time, and improved oral bioavailability of ENR. Taken the good oral safety of Cas into consideration, ENR-Cas should be a more promising oral preparation of ENR for clinical application.

Optimization of preparation conditions and in vitro sustained-release evaluation of a novel nanoemulsion encapsulating unsaturated guluronate oligosaccharide

Unsaturated guluronate oligosaccharide (GOS) was prepared from alginate-derived homopolymeric blocks of guluronic acid by alginate lyase-mediated depolymerization. In this study, a GOS-based water-in-oil-in-water (W1/O/W2) nanoemulsion was prepared, and different influencing factors were investigated. First, linseed oil was selected as the optimal carrier oil. Then, other optimal conditions of the GOS nanoemulsion were determined based on response surface methodology (RSM). Under the optimal conditions, the obtained GOS nanoemulsion showed a spherical structure with an average particle size of 273.93 ± 8.91 nm, and its centrifugal stability was 91.37 ± 0.45 %. Moreover, the GOS nanoemulsion could achieve the aim of sustained release in vitro and be stably stored at 4°C for at least 5 days. This work prepared a novel GOS-based W1/O/W2 nanoemulsion that may effectively address the storage difficulties of unsaturated GOS and provides a valuable contribution to the application of GOS in the food and medicine fields.

A study of the freeze-drying process and quality evaluation of Angelica sinensis

The freeze-drying process of Angelica sinensis (Oliv.) Diels was studied and evaluated. Using a single factor investigation, drying temperature and pressure were determined as the main factors affecting the drying process. The central composite design (CCD) combined with response surface method was employed to optimize the drying process. Optimal conditions were determined to be 52 Pa, 63 °C, and a slice thickness of 5 mm. Subsequently, samples were compared in terms of chemical constituents, microstructure, and in vitro absorption profiles under different drying operations. The freeze-drying process was effective for the preservation of ferulic acid (1.82 mg/g), Z-ligustilide (13.91 mg/g), and other compositions. The porous and loose characteristic structure enabled rapid release of ferulic acid (71%, 60 min) and Z-ligustilide (32%, 60 min). Therefore, the freeze-drying method is a reasonable and efficient drying method for the dehydration of A. sinensis.

Quality by Design for Development, Optimization and Characterization of Brucine Ethosomal Gel for Skin Cancer Delivery

Natural products have been extensively used for treating a wide variety of disorders. In recent times, Brucine (BRU) as one of the natural medications extracted from seeds of nux vomica, was investigated for its anticancer activity. As far as we know, this is the first study on BRU anticancer activity against skin cancer. Thus, the rational of this work was implemented to develop, optimize and characterize the anticancer activity of BRU loaded ethosomal gel. Basically, thin film hydration method was used to formulate BRU ethosomal preparations, by means of Central composite design (CCD), which were operated to construct (3²) factorial design. Two independent variables were designated (phospholipid percentage and ethanol percentage) with three responses (vesicular size, encapsulation efficiency and flux). Based on the desirability function, one formula was selected and incorporated into HPMC gel base to develop BRU loaded ethosomal gel. The fabricated gel was assessed for all physical characterization. In-vitro release investigation, ex-vivo permeation and MTT calorimetric assay were performed. BRU loaded ethosomal gel exhibited acceptable values for the characterization parameters which stand proper for topical application. In-vitro release investigation was efficiently prolonged for 6 h. The flux from BRU loaded ethosome was enhanced screening optimum SSTF value. Finally, in-vitro cytotoxicity study proved that BRU loaded ethosomal gel significantly improved the anticancer activity of the drug against A375 human melanoma cell lines. Substantially, the investigation proposed a strong motivation for further study of the lately developed BRU loaded ethosomal gel as a prospective therapeutic strategy for melanoma treatment.

Date Palm Extract (Phoenix dactylifera) PEGylated Nanoemulsion: Development, Optimization and Cytotoxicity Evaluation

Date palm fruit (Phoenix dactylifera) is reputed to have numerous biological activities, including anticancer properties. To utilize the great fortune of this fruit, the current study aimed to maximize its pharmacological activity. Date palm extract (DPE) of Khalas cultivar was obtained in powder form and then was formulated into nanoemulsion (NE). The optimized DPE-NE was formulated along with its naked counterpart followed by studying their physical and chemical properties. A qualitative assessment of total serum protein associated with the surface of formulations was implemented. Studies for the in vitro release of DPE from developed NE before and after incubation with serum were investigated. Eventually, an MTT assay was conducted. Total phenolic and flavonoid contents were 22.89 ± 0.013 mg GAE/g of dry DPE and 9.90 ± 0.03 mg QE/g of dry DPE, respectively. Homogenous NE formulations were attained with appropriate particle size and viscosity that could be administered intravenously. The optimized PEGylated NE exhibited a proper particle size, PDI, and zeta potential. Total serum protein adsorbed on PEG-NE surface was significantly low. The release of the drug through in vitro study was effectively extended for 24 h. Ultimately; PEGylated NE of DPE attained significant inhibition for cancer cell viability with IC₅₀ values of 18.6 ± 2.4 and 13.5 ± 1.8 µg/mL for MCF-7 and HepG2 cell lines, respectively. PEGylated NE of DPE of Khalas cultivar will open the gate for future adjuvants for cancer therapy.

Recent updates in the polysaccharides-based Nano-biocarriers for drugs delivery and its application in diseases treatment: A review

With people's increasing awareness of diseases treatment, the researchers began to focus on drug delivery to the exact site of action at the optimal rate. Some researchers have proved that many nanostructures loaded with drugs are significantly better than conventional nanostructures. However, the materials from which the nanostructure determines its performance. To use it as a pharmaceutical ingredient, it must meet strict safety regulatory standards worldwide. Therefore, people's attention has paid to easily available natural substances. As far as we know, bioactive polysaccharides are excellent candidates for realizing these purposes. To be precise, due to the natural availability of polysaccharides, it has been widely used in the research of Nano-biocarriers loaded with drugs. Based on the above analysis, the nanomaterials developed through the laboratory have great potential for upgrading to market products. Therefore, it is of great significance to review the latest progress of polysaccharide-based Nano-biocarriers in drug delivery and their application in diseases treatment. In this work, we focused on the preparation of polysaccharides-based Nano-biocarriers, commonly used polysaccharides for preparing Nano-biocarriers, and drugs loaded on polysaccharides-based Nano-biocarriers to treat diseases. Shortly, polysaccharide-based Nano-biocarriers will be increasingly used in drug delivery and treatment of diseases.

Encapsulation and Characterization of Nanoemulsions Based on an Anti-oxidative Polymeric Amphiphile for Topical Apigenin Delivery

Apigenin (Apig) is used as a model drug due to its many beneficial bio-activities and therapeutic potentials. Nevertheless, its poor water solubility and low storage stability have limited its application feasibility on the pharmaceutical field. To address this issue, this study developed nanoemulsions (NEs) using an anti-oxidative polymeric amphiphile, d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), hydrogenated soy lecithin (HL), black soldier fly larvae (BSFL) oil, and avocado (AV) oil through pre-homogenization and ultrasonication method. Addition of TPGS (weight ratios 100 and 50% as compared to HL) into NEs effectively reduced particle size and phase transition region area of NEs with pure HL. Incorporation of Apig into NEs made particle size increase and provided a disorder effect on intraparticle molecular packing. Nevertheless, the encapsulation efficiency of NEs for Apig approached to about 99%. The chemical stability of Apig was significantly improved and its antioxidant ability was elevated by incorporation with BSFL oil and AV oil NEs, especially for NEs with single TPGS. NEs with single TPGS also exhibited the best Apig skin deposition. For future application of topical Apig delivery, NEs-gel was formed by the addition of hyaluronic acid (HA) into NEs. Their rheological characteristics were dominated by the surfactant ratios of HL to TPGS.

Radioprotective Potential of Nutraceuticals and their Underlying Mechanism of Action

Radiations are an efficient treatment modality in cancer therapy. Besides the treatment effects of radiations, the ionizing radiations interact with biological systems and generate reactive oxygen species that interfere with the normal cellular process. Previous investigations of synthetic radioprotectors have shown less effectiveness, mainly owing to some limiting effects. The nutraceuticals act as efficient radioprotectors to protect the tissues from the deleterious effects of radiation. The main radioprotection mechanism of nutraceuticals is the scavenging of free radicals while other strategies are involved modulation of signaling transduction of pathways like MAPK (JNK, ERK1/2, ERK5, and P38), NF-kB, cytokines, and their protein regulatory genes expression. The current review is focused on the radioprotective effects of nutraceuticals including vitamin E, -C, organosulphur compounds, phenylpropanoids, and polysaccharides. These natural entities protect against radiation-induced DNA damage. The review mainly entails the antioxidant perspective and mechanism of action of their radioprotective activities on a molecular level, DNA repair pathway, anti-inflammation, immunomodulatory effects, the effect on cellular signaling pathways, and regeneration of hematopoietic cells.

Nanoencapsulation of Saccharomycopsis fibuligera VIT-MN04 using electrospinning technique for easy gastrointestinal transit

In this study, probiotic yeast Saccharomycopsis fibuligera (S. fibuligera) VIT-MN04 was encapsulated with wheat bran fibre (WBF) and exopolysaccharide (EPS) along with 5% polyvinylpyrrolidone (PVP) using electrospinning technique for easy gastrointestinal transit (GIT). The electrospinning materials viz. WBF (10%), EPS (15%), PVP (5%) and electrospinning parameters viz. applied voltage (10 kV) and tip to collector distance (15 cm) were optimised using response surface methodology to produce fine nanofibres to achieve maximum encapsulation efficiency (100%) and GIT tolerance (97%). The probiotic yeast was successfully encapsulated in nanofibre and investigated for potential properties. The survival of encapsulated S. fibuligera VIT-MN04 was increased compared to the free cells during in vitro digestion. In addition, encapsulated yeast cells retained their viability during storage at 4°C for 56 days. The nanofibres were characterised using scanning electron microscopy, atomic force microscopy, X-ray diffraction, thermogravimetric analysis, zeta potential analysis and Fourier transform infrared spectroscopy followed by gas chromatography-mass spectrometry and nuclear magnetic resonance analysis. This work provides an efficient approach for encapsulation of probiotic yeast with the nanofibres which can also broaden the application of the prebiotic like WBF providing an idea for the efficient preparation of functional synbiotic supplements in the food industry.

β-Cyclodextrin Inclusion Complex Containing Litsea cubeba Essential Oil: Preparation, Optimization, Physicochemical, and Antifungal Characterization

Litsea cubeba essential oil (LCEO), as naturally plant-derived products, possess good antimicrobial activities against many pathogens, but their high volatility and poor water solubility limit greatly the application in food industry. In this research, inclusion complex based on β-cyclodextrin (β-CD) and LCEO, was prepared by saturated aqueous solution method. An optimum condition using the response surface methodology (RSM) based on Box–Behnken design (BBD) was obtained with the inclusion time of 2 h and β-CD/LCEO ratio of 4.2 at 44 °C. Under the condition, the greatest yield of 71.71% with entrapment efficiency of 33.60% and loading capacity of 9.07% was achieved. In addition, the structure and characteristic of LCEO/β-CD inclusion complex (LCEO/βCD-IC) were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR), which indicated that LCEO/βCD-IC was successfully formed. The particle size of LCEO/βCD-IC was determined to be 17.852 μm. Thermal properties of LCEO/βCD-IC evaluated by thermogravimetric-differential scanning calorimetry (TG-DTA) illustrated better thermal stability of the aimed product compared with the physical mixture. Furthermore, the tests of antifungal activity showed that LCEO/βCD-IC was able to control the growth of Penicillium italicum, Penicillium digitatum, and Geotrichum citri-aurantii isolated from postharvest citrus. Our present study confirmed that LCEO/βCD-IC might be further applied as an alternative to chemical fungicides for protecting citrus fruit from postharvest disease.

Structural characteristics and anti-tumor/-oxidant activity in vitro of an acidic polysaccharide from Gynostemma pentaphyllum

In this paper, a novel acidic polysaccharide (CPS-1) was successively prepared from Gynostemma pentaphyllum using hot water isolation method to explore its antitumor and antioxidant activities. Structural characteristics of CPS-1 were evaluated by SEM, HPGPC, HPAEC-PAD, FT-IR, and NMR. The results indicated: CPS-1 was mainly composed of Ara, Gal, Glc, Xyl, Man, GalA and GlcA in a molar ratio of 1.23:2.14:0.67:0.2:0.29:0.16:0.04 with molecular weight of 3297 kDa. Combining with the results of FT-IR and NMR, it was inferred that CPS-1 was mainly possessed the five main linkages including α-D-Ara, α-D-Gal, α-D-Man, α-D-Xyl and β-D-Glc. Furthermore, MTT results exhibited that the IC₅₀ value of CPS-1 for inhibitive effect on SPC-A-1 and MGC-803 cells for 24 h were 284.36 and 365.27 μg/mL, respectively. Microscopic observations showed that the cells exhibited significant apoptotic characteristics, such as cell shrinkage, the decreased of cell adherence and the appearance of apoptotic bodies. It was shown that CPS-1 had significant anti-tumor activity. In addition, the ability of CPS-1 to scavenge superoxide radical, ABTS and DPPH radicals was also enhanced with the increased of concentration. Therefore, it was revealed that CPS-1 might be used as a natural anticancer and antioxidant component.

An Improved Nanoemulsion Formulation Containing Kojic Monooleate: Optimization, Characterization and In Vitro Studies

Tyrosinase inhibitors have become increasingly important targets for hyperpigmentation disease treatment. Kojic monooleate (KMO), synthesized from the esterification of kojic acid and oleic acid, has shown a better depigmenting effect than kojic acid. In this study, the process parameters include the speed of high shear, the time of high shear and the speed of the stirrer in the production of nanoemulsion containing KMO was optimized using Response Surface Methodology (RSM), as well as evaluated in terms of its physicochemical properties, safety and efficacy. The optimized condition for the formulation of KMO nanoemulsion was 8.04 min (time of high shear), 4905.42 rpm (speed of high shear), and 271.77 rpm (speed of stirrer), which resulted in a droplet size of 103.97 nm. An analysis of variance (ANOVA) showed that the fitness of the quadratic polynomial fit the experimental data with large F-values (148.79) and small p-values (p < 0.0001) and an insignificant lack of fit. The optimized nanoemulsion containing KMO with a pH value of 5.75, showed a high conductivity value (3.98 mS/cm), which indicated that the nanoemulsion containing KMO was identified as an oil-in-water type of nanoemulsion. The nanoemulsion remains stable (no phase separation) under a centrifugation test and displays accelerated stability during storage at 4, 25 and 45 °C over 90 days. The cytotoxicity assay showed that the optimized nanoemulsion was less toxic, with a 50% inhibition of cell viability (IC₅₀) > 500 μg/mL, and that it can inhibit 67.12% of tyrosinase activity. This study reveals that KMO is a promising candidate for the development of a safe cosmetic agent to prevent hyperpigmentation.

Modulation of Apoptosis by Plant Polysaccharides for Exerting Anti-Cancer Effects: A Review

Cancer has become a significant public health problem with high disease burden and mortality. At present, radiotherapy and chemotherapy are the main means of treating cancer, but they have shown serious safety problems. The severity of this problem has caused further attention and research on effective and safe cancer treatment methods. Polysaccharides are natural products with anti-cancer activity that are widely present in a lot of plants, and many studies have found that inducing apoptosis of cancer cells is one of their important mechanisms. Therefore, this article reviews the various ways in which plant polysaccharides promote apoptosis of cancer cells. The major apoptotic pathways involved include the mitochondrial pathway, the death receptor pathway, and their upstream signal transduction such as MAPK pathway, PI3K/AKT pathway, and NF-κB pathway. Moreover, the paper has also been focused on the absorption and toxicity of plant polysaccharides with reference to extant literature, making the research more scientific and comprehensive. It is hoped that this review could provide some directions for the future development of plant polysaccharides as anticancer drugs in pharmacological experiments and clinical researches.

Design and development of spirulina polysaccharide-loaded nanoemulsions with improved the antitumor effects of paclitaxel

Aims: In this study, we prepared spirulina polysaccharides into spirulina polysaccharide-loaded nanoemulsions (SPS-NEs), and determined the antitumor effect of SPS-NEs, when combined with paclitaxel (PTX).Methods: SPS-NEs were prepared by a phase transformation method. The Characterisation and stability of SPS-NEs was measured. The antitumor effect of SPS-NEs combined with PTX was determined by S180 cells or RAW 264.7 macrophages and S180 tumour-bearing mice.Results: SPS-NEs were spherical and stable, the particle size of SPS-NEs was 84.6 ± 3.31 nm, PDI = 0.235 ± 0.02. PTX + SPS-NEs exhibited a much greater toxicity against RAW 264.7 cells than PTX. PTX + SPS-NEs increased the release of NO, IL-6 and TNF-α, and the expression of p-p65 NF-κB, p-I-κB, TLR4. In addition, PTX + SPS-NEs significantly inhibited tumour growth by 72.82% and increased the secretion of serum IL-2, TNF-α and IFN-γ.Conclusions: SPS-NEs can regulate immunity through TLR4/NF-κB signalling pathways, which enhances the anti-tumour effect of PTX.

Radioprotective effects and mechanisms of animal, plant and microbial polysaccharides

Ionizing radiation is increasingly used to successfully diagnose many human health problems, but ionizing radiation may cause damage to organs/tissues in the living organisms such as the spleen, liver, skin, and brain. Many radiation protective agents have been discovered, with the deepening of radiation research. Unfortunately, these protective agents have many side effects, which cause drug resistance, nausea, vomiting, osteoporosis, etc. The polysaccharides extracted from natural sources are widely available and low in toxicity. In vivo and in vitro experiments have demonstrated that polysaccharides have anti-radiation activity through anti-oxidation, immune regulation, protection of hematopoietic system and protection against DNA damage. Recently, some studies have shown that polysaccharides were resistant to radiation. In the review, the anti-radiation activities of polysaccharides from different sources are summarized, and the anti-radiation mechanisms are discussed as well. It can be used to develop more effective anti-radiation management drugs.

Preparation, characterization, antioxidant and antiglycation activities of selenized polysaccharides from blackcurrant

An ultrasound-assisted enzymatic method was used to extract the polysaccharides from blackcurrant fruits (BP), and then a nitric acid-sodium selenite method was employed to prepare twelve kinds of selenized blackcurrant polysaccharides (SBPs). Among them, SBP-1, SBP-2 and SBP-3 with different selenium contents of 250 ± 11, 312 ± 15 and 643 ± 24 μg g⁻¹, displayed relatively higher 2,2-diphenyl-1-picrylhydrazyl radical (DPPH˙) scavenging activities than the others. After treating with a Sepharose-6B chromatography column, the purified blackcurrant polysaccharide (PBP) and three selenized polysaccharides (PSBP-1, PSBP-2, PSBP-3) with high purity were obtained. Compared with PBP, PSBPs possessed a larger absolute value of zeta potential (ZP) and smaller particle size, indicating the positive influence of selenized modification on physical stability of polysaccharides. Ultraviolet (UV), Fourier transform infrared (FT-IR) and circular dichroism (CD) spectra confirmed that selenium had been introduced onto the polysaccharide structure. X-ray diffraction (XRD) and I₂–KI reaction results indicated that selenized modification did not cause an obvious change in crystal form and branch structure of blackcurrant polysaccharides. In addition, PSBPs were superior to PBP in antioxidant and antiglycation capacities, and the bioactivities of PSBPs were significantly improved in positive correlation with selenium content. This study suggested that PSBPs may be a potential selenium source and serve as functional food and medicine.

An ultrasound-assisted enzymatic method was used to extract the polysaccharides from blackcurrant fruits (BP), and then a nitric acid-sodium selenite method was employed to prepare twelve kinds of selenized blackcurrant polysaccharides (SBPs).

Microencapsulation of oil and protein hydrolysate from fish within a high-pressure homogenized double emulsion

In this study, the effect of high-pressure homogenization on the water-in-oil-in-water (W₁/O/W₂) double emulsions containing fish protein hydrolysate and fish oil encapsulated within a complex of whey protein concentrate and inulin were investigated in order to produce stable double emulsion. After adequacy of the positive influence of high-pressure homogenization at W₁/O (one pass) and W₁/O/W₂ (three passes), the double emulsions were produced with (H) and without (HS) high-pressure homogenization. H samples were demonstrated lower CI of double emulsion and higher amounts of yield, total oil, encapsulated oil, EPA and DHA of microcapsules in comparison with HS samples. At subsequent step, response surface methodology were applied to optimize the high-pressure homogenization conditions (700-1500 Ba) of double emulsions in terms of minimum CI of emulsions and maximum microencapsulation efficiency and oxidation stability. Optimal conditions were obtained by using high-pressure homogenization at 1000 and 1100 Ba on W₁/O and W₁/O/W₂, respectively.

Fabrication of BSA-Pinus koraiensis polyphenol-chitosan nanoparticles and their release characteristics under in vitro simulated gastrointestinal digestion

BSA and chitosan were used to prepare nanoparticles of polyphenols from the pine cones of Pinus koraiensis (PKP-NPs).