The effect of clove essential oil loaded chitosan nanoparticles on the shelf life and quality of pomegranate arils

Effect of Protocatechuic Acid-Grafted Chitosan-Based Coatings Enriched With Clove Essential Oil Microcapsules to Improve the Postharvest Quality of Cherry Tomatoes

Cherry tomatoes harvested are prone to rotting and spoilage. In the present study, clove essential oil (CEO) was encapsulated with protocatechuic acid-grafted chitosan (PCA-g-CS) as wall material, and the effect of microcapsule on cherry tomatoes preservation was studied. Results showed that PCA-g-CS microcapsules loaded with CEO were successfully prepared. Compared with native chitosan microcapsules (58.87% and 41.24%), PCA-g-CS microcapsules (82.50% and 62.59%) have a higher encapsulation efficiency and loading capacity. The simulated release of PCA-g-CS microcapsules loaded with CEO in a phosphate buffer saline solution shows that this technology could control the sustained release of CEO. Among all of the cherry tomatoes' preservation groups, the cherry tomatoes treated with the PCA-g-CS microcapsules coating solution exhibited the lowest weight loss and respiration rate, the highest firmness, highest antimicrobial activities than other treatment groups, effectively extending the shelf life of cherry tomatoes. Therefore, PCA-g-CS microcapsules coating solution is the most effective coating for controlling undesirable microbial, extending shelf life and improving physicochemical and sensory alterations of cherry tomatoes. Practical Application: Microcapsules created with protocatechuic acid-grafted chitosan can significantly enhance the encapsulation efficiency of essential oils and their antimicrobial efficacy. In practical applications, this approach can notably extend the shelf life of cherry tomatoes and other fruits.

Harnessing Nanotechnology to Enhance Essential Oil Applications

Essential oils (EOs) are versatile natural compounds with significant antimicrobial, antioxidant, antifungal, and therapeutic properties, making them valuable in industries such as food preservation, agriculture, and healthcare. However, their inherent volatility, low water solubility, and susceptibility to environmental degradation limit their direct applications. Nanotechnology offers transformative solutions to these challenges, enhancing the stability, bioavailability, and efficacy of EOs through innovative nano systems such as nano emulsions, encapsulations, and nanocomposites. This study explores the integration of nanotechnology with essential oils, emphasizing advanced preparation techniques, physicochemical properties, and diverse applications. It highlights sustainable approaches, including eco-friendly synthesis and biodegradable carriers, which align with global trends toward green chemistry. By addressing key challenges and proposing future directions, this research underscores the potential of EO nano systems to deliver multifunctional and environmentally conscious solutions for global challenges such as food security, antimicrobial resistance, and sustainable agriculture.

Development of polyvinyl alcohol/carboxymethylcellulose-based bio-packaging film with citric acid crosslinking and clove essential oil encapsulated chitosan nanoparticle pickering emulsion

This study developed polyvinyl alcohol (PVA)/carboxymethylcellulose (CMC)-based films, using citric acid (CA) as a non-toxic crosslinking agent, to enhance the shelf life of water-soluble packaging films. Clove essential oil (CEO)-loaded chitosan nanoparticles (CSNPs) were prepared via Pickering emulsion and incorporated into PVA/CMC/CA composite films. The encapsulation of CEO was confirmed by FTIR and optical microscopy. Thermal properties were analyzed using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), revealing improved thermal stability and a decrease in glass transition temperature (Tg) upon crosslinking. The formation of ester bonds was confirmed by ATR-FTIR and 13CNMR. Water contact angle (WCA) measurements showed a decrease in hydrophilicity, enhancing the barrier properties of the films. SEM images demonstrated good dispersion of CSNP/CEO within the matrix, improving mechanical and barrier properties. The films exhibited a 30 % reduction in water vapor permeability and water solubility. Controlled release studies indicated that the composite films sustained CEO release, extending the shelf life of cherry tomatoes. Thus, these PVA/CMC/CA-CSNP/CEO composite films offer strong potential for food preservation applications.

Polyvinyl alcohol films incorporated with clove essential oil emulsions stabilized by soy protein isolate-derived amyloid fibrils: Fabrication, characterization, and its application for active packaging

This study aimed to prepare a novel emulsion film with high stability, using soy protein-derived amyloid fibrils (SAFs) as an emulsifier incorporating clove essential oil (CEO) as the active component, and the polyvinyl alcohol (PVA) matrix to stabilize the system. The results demonstrated that SAFs can successfully stabilize CEO. Emulsion prepared by SAFS and CEO (SAC) exhibited a small droplet size and better dispersibility compared with SPI and CEO (SC) emulsion. According to FT-IR results, PVA addition increased the hydrogen bond interactions among emulsion film components, thus further reinforcing the protein matrix, increasing the tensile strength (TS) (41.18 MPa) and elongation at break (E) (121.62 %) of the films. The uniform appearance of SAC-PVA (SACP) emulsion films was confirmed by SEM images. Furthermore, SACP emulsion films show distinctive barrier properties, optical properties, and outstanding antioxidant properties. Finally, emulsion films exhibited excellent preservation of strawberries, resulting in an effective decline of the decay rate.

The impact of different acidic conditions and food substrates on Listeria monocytogenes biofilms development and removal using nanoencapsulated carvacrol

Listeria monocytogenes biofilms present a significant challenge in the food industry. This study explores the impact of different acidic conditions of culture media and food matrices on the development and removal of biofilms developed on stainless steel surfaces by wild-type (WT) L. monocytogenes strains as well as in two mutant derivatives, ΔsigB and ΔagrA, that have defects in the general stress response and quorum sensing, respectively. Additionally, the study investigates the efficacy of nanoencapsulated carvacrol as an antimicrobial against L. monocytogenes biofilms developed in Tryptic Soy Broth (TSB) culture media acidified to different pH conditions (3.5, 4.5, 5.5, 6.5), and in food substrates (apple juice, strained yogurt, vegetable soup, semi-skimmed milk) having the same pH levels. No biofilm formation was observed for all L. monocytogenes strains at pH levels of 3.5 and 4.5 in both culture media and food substrates. However, at pH 5.5 and 6.5, increased biofilm levels were observed in both the culture media and food substrates, with the WT strain showing significantly higher biofilm formation (3.04-6.05 log CFU cm-2) than the mutant strains (2.30-5.48 log CFU cm-2). For both applications, the nanoencapsulated carvacrol demonstrated more potent antimicrobial activity against biofilms developed at pH 5.5 with 2.23 to 3.61 log reductions, compared to 1.58-2.95 log reductions at pH 6.5, with mutants being more vulnerable in acidic environments. In food substrates, nanoencapsulated carvacrol induced lower log reductions (1.58-2.90) than the ones in TSB (2.02-3.61). These findings provide valuable insights into the impact of different acidic conditions on the development of L. monocytogenes biofilms on stainless steel surfaces and the potential application of nanoencapsulated carvacrol as a biofilm control agent in food processing environments.

Konjac glucomannan films incorporated pectin-stabilized Mandarin oil emulsions: Structure, properties, and application in fruit preservation

To enhance the water-resistance and antibacterial properties of KGM films, mandarin oil (MO), was directly emulsified by pectin and then dispersed to the KGM matrix. The effect of MO concentration (0, 0.5, 1.0, 1.5, and 2 wt%) on the performance of the film-forming emulsions as well as the emulsion films was investigated. The results revealed that pectin could encapsulate and protect MO, and KGM as film matrix could further contributed to the high stability of the film-forming emulsions. The FT-IR, XRD, and SEM suggested that MO stabilized by pectin was uniformly distributed in the KGM matrix. The compatibility and good interaction between KGM and pectin contributed to highly dense and compact structure. Furthermore, increasing the concentration of MO effectively improved water-resistance, oxygen barrier, and antimicrobial activity of the KGM based films. The 1.5 wt% MO loaded KGM film had the highest tensile strength (72.22 MPa) and water contact angle (θ = 95.73°), reduced the WVP and oxygen permeability by about 25.8 % and 32.8 times, respectively, prolonged the shelf life of strawberries for 8 days. As demonstrated, the 1.5 wt% MO-loaded KGM film has considerable potential for high-performance natural biodegradable active films to ensure food safety and reduce environmental impacts.

Ultraviolet spectrophotometry as method to determine the concentration of β-myrcene released from chitosan in aqueous medium

Myrcene (β-myrcene), found in essential oils from plant species such as hops and cannabis, has many advantageous properties, but its use is limited due to volatility and low solubility in water. One way to circumvent these limitations is to encapsulate the essential oils in a polymer matrix. However, these hydrophobic molecules are difficult to quantify when dispersed in water. Seeking to study the release of this terpene in drug release tests from polymeric matrices, this work aimed to develop an easy and cheap UV spectrophotometric method for the quantification of β-myrcene in aqueous medium. To achieves this goal, samples were prepared in 0.05% (w/v) polysorbate 80 solution, with concentrations of β-myrcene ranging from 0.01% to 0.1% (v/v), and were analyzed at 226 nm. Each sample was analyzed in triplicate and repeated on three different days, to evaluate the repeatability of the results. The results were subjected to Q, F and Student's t-tests. The regression parameters obtained for β-myrcene were above 0.99 and through statistical analysis, it was possible to confirm the repeatability for the results. The values of the limits of detection and quantification indicated that the method is not affected by intrinsic factors of the equipment. The results of accuracy, robustness and selectivity showed recovery rates within acceptable limits. This demonstrates that the quantification of β-myrcene in aqueous medium by UV spectrophotometry is feasible.

Clove Essential Oil: Chemical Profile, Biological Activities, Encapsulation Strategies, and Food Applications

Plants have proven to be important sources for discovering new compounds that are useful in the treatment of various diseases due to their phytoconstituents. Clove (Syzygium aromaticum L.), an aromatic plant widely cultivated around the world, has been traditionally used for food preservation and medicinal purposes. In particular, clove essential oil (CEO) has attracted attention for containing various bioactive compounds, such as phenolics (eugenol and eugenol acetate), terpenes (β-caryophyllene and α-humulene), and hydrocarbons. These constituents have found applications in cosmetics, food, and medicine industries due to their bioactivity. Pharmacologically, CEO has been tested against a variety of parasites and pathogenic microorganisms, demonstrating antibacterial and antifungal properties. Additionally, many studies have also demonstrated the analgesic, antioxidant, anticancer, antiseptic, and anti-inflammatory effects of this essential oil. However, CEO could degrade for different reasons, impacting its quality and bioactivity. To address this challenge, encapsulation is viewed as a promising strategy that could prolong the shelf life of CEO, improving its physicochemical stability and application in various areas. This review examines the phytochemical composition and biological activities of CEO and its constituents, as well as extraction methods to obtain it. Moreover, encapsulation strategies for CEO and numerous applications in different food fields are also highlighted.

Revolutionizing tropical fruits preservation: Emerging edible coating technologies

Tropical fruits, predominantly cultivated in Southeast Asia, are esteemed for their nutritional richness, distinctive taste, aroma, and visual appeal when consumed fresh. However, postharvest challenges have led to substantial global wastage, nearly 50 %. The advent of edible biopolymeric nanoparticles presents a novel solution to preserve the fruits' overall freshness. These nanoparticles, being edible, readily available, biodegradable, antimicrobial, antioxidant, Generally Recognized As Safe (GRAS), and non-toxic, are commonly prepared via ionic gelation owing to the method's physical crosslinking, simplicity, and affordability. The resulting biopolymeric nanoparticles, with or without additives, can be employed in basic formulations or as composite blends with other materials. This study aims to review the capabilities of biopolymeric nanoparticles in enhancing the physical and sensory aspects of tropical fruits, inhibiting microbial growth, and prolonging shelf life. Material selection for formulation is crucial, considering coating materials, the fruit's epidermal properties, internal and external factors. A variety of application techniques are covered such as spraying, and layer-by-layer among others, including their advantages, and disadvantages. Finally, the study addresses safety measures, legislation, current challenges, and industrial perspectives concerning fruit edible coating films.

Characterization of a Clove Essential Oil Slow-Release Microencapsulated Composite Film and Its Preservation Effects on Blueberry

In order to extend the shelf life of fruits and vegetables, a sodium alginate-sodium carboxymethyl cellulose composite film loaded with poly(vinyl alcohol) microcapsules was prepared in this paper. The optimal film substrate ratios were obtained after the response surface optimization. Poly(vinyl alcohol) microcapsules were prepared, clove essential oil was loaded into them to investigate the effects of microcapsules on the composite film properties, and the microcapsule composite film with the best overall performance was selected to be applied to blueberry preservation. The results showed that the composite film of 0.84% sodium alginate, 0.25% sodium carboxymethyl cellulose, and 0.56% glycerol presented excellent mechanical properties after adding 1.75% microcapsules. It had a good inhibitory effect on Escherichia coli, Staphylococcus aureus, and Penicillium and had a DPPH clearance rate of 83.78%. The low-temperature bonded composite film could slow down the respiration rate of blueberry, inhibit browning and water loss, effectively maintain the quality of blueberry, and have a significant preservation effect on the anthocyanin and soluble solid content of blueberry. The clove essential oil slow-release microencapsulated composite film can be used for blueberry preservation.

Synthesis of β-acids loaded chitosan-sodium tripolyphosphate nanoparticle towards controlled release, antibacterial and anticancer activity

The development of nanoparticles loaded with natural active ingredients is one of the hot trends in the pharmaceutical industry. Herein, chitosan was selected as the base material, and sodium tripolyphosphate was chosen as the cross-linking agent. Chitosan nanoparticles loaded with β-acids from hops were prepared by the ionic cross-linking method. The results of Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) indicated that chitosan nanoparticles successfully encapsulated β-acids. The loading capacity of chitosan nanoparticles with β-acids was 2.00 %-18.26 %, and the encapsulation efficiency was 0.58 %-55.94 %. Scanning electron microscopy (SEM), transmission electron microscope (TEM), particle size, and zeta potential results displayed that the nanoparticles revealed a sphere-like distribution with a particle size range of 241-261 nm, and the potential exhibited positive potential (+14.47-+16.27 mV). The chitosan nanoparticles could slowly release β-acids from different simulated release media. Notably, the β-acids-loaded nanoparticles significantly inhibited Staphylococcus aureus ATCC25923 (S. aureus) and Escherichia coli ATCC25922 (E. coli). Besides, β-acids-loaded chitosan nanoparticles were cytotoxic to colorectal cancer cells (HT-29 and HCT-116). Therefore, applying chitosan nanoparticles can further expand the application of β-acids in biomedical fields.

Ultrasound treatment alleviates external pericarp browning and improves fruit quality of pomegranate during storage

BACKGROUND

Ultrasound treatment has a beneficial role in horticultural production from harvest to consumption. The quality traits and microbiological load in pomegranate fruit were explored during 30 days' storage at 20 °C after 10 min and 30 min ultrasound treatments.

RESULTS

Ultrasound treatment significantly reduced the microbiological load during storage, providing a relatively clean and suitable storage environment. This was especially true for the 30 min treatment, which also maintained relatively lower weight loss and kept the browning rate below 5% during storage. Meanwhile, the fruit treated with ultrasound had higher ascorbic acid and anthocyanin content, which provided better antibacterial properties and higher nutraceutical properties until the end of storage. The 30 min ultrasound treatment significantly delayed the decrease in catalase (CAT) enzyme activity and the increase in peroxidase (POD) enzyme activity. Combined with weighted gene co-expression network analysis (WGCNA), and correlation analysis, color indicators and antioxidant activity induced by ultrasound treatment were responsible for the relatively higher fruit quality of pomegranate.

CONCLUSION

Ultrasound treatment can improve the sensory quality and nutritional characteristics of pomegranate fruits during storage, and reduce the microbiological load. Ultrasound for 30 min was better than 10 min for prolonging the storage life of pomegranate. Our results will provide valuable information for ultrasound application in other horticultural products. © 2023 Society of Chemical Industry.

Application of chitosan and other biopolymers based edible coatings containing essential oils as green and innovative strategy for preservation of perishable food products: A review

Deterioration of perishable foods due to fungal contamination and lipid peroxidation are the most threatened concern to food industry. Different chemical preservatives have been used to overcome these constrains; however their repetitive use has been cautioned owing to their negative impact after consumption. Therefore, attention has been paid to essential oils (EOs) because of their natural origin and proven antifungal and antioxidant activities. Many EO-based formulations have been in use but their industrial-scale application is still limited, possibly due to its poor solubility, vulnerability towards oxidation, and aroma effect on treated foods. In this sense, active food packaging using biopolymers could be considered as promising approach. The biopolymers can enhance the stability and effectiveness of EOs through controlled release, thus minimizes the deterioration of foods caused by fungal pathogens and oxidation without compromising their sensory properties. This review gives a concise appraisal on latest advances in active food packaging, particularly developed from natural polymers (chitosan, cellulose, cyclodextrins etc.), characteristics of biopolymers, and current status of EOs. Then, different packaging and their effectiveness against fungal pathogens, lipid-oxidation, and sensory properties with recent previous works has been discussed. Finally, effort was made to highlights their safety and commercialization aspects towards market solutions.

Chemical composition and biological activities of the essential oil from Eugenia stipitata McVaugh leaves

In the present study, the volatile components and cytotoxic, antibacterial, antioxidant, and antiprotozoal activities of the essential oil obtained from the leaves of Eugenia stipitata McVaugh (Myrtaceae) grown in the Brazilian Northeast region (Araripe) were investigated. The essential oil was obtained by hydrodistillation. The leaves of E. stipitata provided an oil yield of 0.13 ± 0.01% (w/w). The volatile compounds in the essential oil of E. stipitata were analysed using gas chromatography, and the volatile chemical composition was mainly composed of β-eudesmol (15.28%), γ-eudesmol (10.85%), elemol (10.21%) and caryophyllene oxide (6.65%). The essential oil of E. stipitata was highly selective against Leishmania braziliensis and L. infantum promastigotes. The essential oil exhibited good antibacterial activity. E. stipitata essential oil showed low free-radical scavenging activity. Our results suggest that the E. stipitata essential oil is a relevant source of the primary compounds required for the development of antibacterial and antiprotozoal drugs.

In Situ Fermentation of an Ultra-Strong, Microplastic-Free, and Biodegradable Multilayer Bacterial Cellulose Film for Food Packaging

Cellulose-based food packaging has a significant importance in reducing plastic pollution and also ensuring our safety from microplastics. Nonetheless, lignocellulose necessitates sophisticated physical and chemical treatments to be fashioned into a satisfactory food packaging, thus leading to extra consumption and operations. Here, we present a gel-assisted biosynthesis approach for the in situ production of bacterial cellulose (BC) that can be directly applied to food packaging. Komagataeibacter sucrofermentans is homogeneously distributed in the gellan gum (GG)-assisted culture system, and the BC/GG film with an even surface is attained. Then, the BC/GG film is integrated with an antibacterial layer containing a quaternary ammonium chitosan microsphere (QM) through an in situ spray biosynthesis method. The resulting BC/GG/QM multilayer film combines the barrier properties and antibacterial activity. The method for in situ biosynthesis is green, efficient, and convenient to endow the multilayer film with excellent barrier capacity (1.76 g·mm·m-2·d-1·KPa-1 at RH 75%), high mechanical properties (strength 462 MPa), and antibacterial activity (>90% against Escherichia coli O157:H7 and Staphylococcus aureus). In terms of food preservation, the overall performance of the BC/GG/QM multilayer film is better than the commercial petroleum-based film and lignocellulose-derived film. This work proffers a novel strategy to produce a more beneficial and eco-friendly multilayer film via in situ biosynthesis, which manifests great utility in the field of food packaging.

The characterization of antimicrobial nanocomposites based on chitosan, cinnamon essential oil, and TiO2 for fruits preservation

The freshness and safety of fruits have always been crucial issues in the development of the industry. However, the existing fresh-keeping methods have limited effect, meanwhile, the preservation mechanism of different materials. In this study, Cinnamon essential oil (CEO), TiO_2, and chitosan (CS) were compounded to prepare safe and renewable nanocomposites (CS-T-C) for fruit preservation. The results showed that CEO mainly destroyed the bacterial cell wall through penetration, while TiO₂ is through destruction. The strawberry coated with CS-T-C showed better hardness, lower weight loss and mildew rate, and the shelf-life at 20℃ was extended for four days compared with the control. And all four nanocomposites were not cytotoxic. In summary, nanocomposites can deal with many problems through different mechanisms to maximize the fresh-keeping effect, and the nanocomposites developed in this work might be a good choice for fruit preservation.

Advances in Controllable Release Essential Oil Microcapsules and Their Promising Applications

Essential oils (EOs) have emerged as natural and popular ingredients used in the preparation of safe and sustainable products because of their unique characteristics, such as antibacterial and antioxidant activity. However, due to their high volatility, poorly solubility in water, and susceptibility to degradation and oxidation, the application of EOs is greatly limited. One of the promising strategies for overcoming these restrictions is encapsulation, which involves in the entrapment of EOs inside biocompatible materials to utilize their controllable release and good bioavailability. In this review, the microencapsulation of the controllable release EOs and their applications are investigated. The focus is on the antimicrobial mechanism of various EOs on different bacteria and fungi, release mechanism of microencapsulated EOs, and preparation research progress of the controllable EOs microcapsules. In addition, their applications are introduced in relation to the food, textiles, agriculture, and medical fields.

Characterization of Synthetic Polymer Coated with Biopolymer Layer with Natural Orange Peel Extract Aimed for Food Packaging

This research was aimed to make biolayer coatings enriched with orange peel essential oil (OPEO) on synthetic laminate, oriented poly(ethylene-terephthalate)/polypropylene (PET-O/PP). Coating materials were taken from biobased and renewable waste sources, and the developed formulation was targeted for food packaging. The developed materials were characterized for their barrier (O₂, CO₂, and water vapour), optical (colour, opacity), surface (inventory of peaks by FTIR), and antimicrobial activity. Furthermore, the overall migration from a base layer (PET-O/PP) in an acetic acid (3% HAc) and ethanol aqueous solution (20% EtOH) were measured. The antimicrobial activity of chitosan (Chi)-coated films was assessed against Escherichia coli. Permeation of the uncoated samples (base layer, PET-O/PP) increased with the temperature increase (from 20 °C to 40 °C and 60 °C). Films with Chi-coatings were a better barrier to gases than the control (PET-O/PP) measured at 20 °C. The addition of 1% (w/v) OPEO to the Chi-coating layer showed a permeance decrease of 67% for CO₂ and 48% for O₂. The overall migrations from PET-O/PP in 3% HAc and 20% EtOH were 1.8 and 2.3 mg/dm², respectively. Analysis of spectral bands did not indicate any surface structural changes after exposure to food simulants. Water vapour transmission rate values were increased for Chi-coated samples compared to the control. The total colour difference showed a slight colour change for all coated samples (ΔE > 2). No significant changes in light transmission at 600 nm for samples containing 1% and 2% OLEO were observed. The addition of 4% (w/v) OPEO was not enough to obtain a bacteriostatic effect, so future research is needed.

Chitosan-based nanocomposites as coatings and packaging materials for the postharvest improvement of agricultural product: A review

The perishability nature of harvested fruits and vegetables, along with the effect of environmental factors, storage conditions, and transportation, reduce the products' quality and shelf-life. Considerable efforts have been allocated to alternate conventional coatings based on new edible biopolymers for packaging. Chitosan is an attractive alternative to synthetic plastic polymers due to its biodegradability, antimicrobial activity, and film-forming properties. However, its conservative properties can be improved by adding active compounds, limiting microbial agents' growth and biochemical and physical damages, and enhancing the stored products' quality, shelf-life, and consumer acceptability. Most of the research on chitosan-based coatings focuses on antimicrobial or antioxidant properties. Along with the advancement of polymer science and nanotechnology, novel chitosan blends with multiple functionalities are required and should be fabricated using numerous strategies, especially for application during storage. This review discusses recent developments in using chitosan as a matrix to fabricate bioactive edible coatings and their positive impacts on increasing the quality and shelf-life of fruits and vegetables.

Nanoparticle applications in food - a review

The use of nanotechnology in the food industry raises uncertainty in many respects. For years, achievements of nanotechnology have been applied mainly in biomedicine and computer science, but recently it has also been used in the food industry. Due to the extremely small (nano) scale, the properties and behavior of nanomaterials may differ from their macroscopic counterparts. They can be used as biosensors to detect reagents or microorganisms, monitor bacterial growth conditions, increase food durability e.g. when placed in food packaging, reducing the amount of certain ingredients without changing the consistency of the product (research on fat substitutes is underway), improve the taste of food, make some nutrients get better absorbed by the body, etc. There are companies on the market that are already introducing nanoparticles into the economy to improve their functionality, e.g. baby feeding bottles. This review focuses on the use of nanoparticles in the food industry, both organic (chitosan, cellulose, proteins) and inorganic (silver, iron, zinc oxide, titanium oxide, etc.). The use of nanomaterials in food production requires compliance with all legal requirements regarding the safety and quantity of nano-processed food products described in this review. In the future, new methods of testing nanoparticles should be developed that would ensure the effectiveness of compounds subjected to, for example, nano-encapsulation, i.e. whether the encapsulation process had a positive impact on the specific properties of these compounds. Nanotechnology has revolutionized our approach towards food engineering (from production to processing), food storage and the creation of new materials and products, and the search for new product applications.

Chitosan nanocarriers containing essential oils as a green strategy to improve the functional properties of chitosan: A review

Large amounts of agricultural waste, especially marine product waste, are produced annually. These wastes can be used to produce compounds with high-added value. Chitosan is one such valuable product that can be obtained from crustacean wastes. Various biological activities of chitosan and its derivatives, especially antimicrobial, antioxidant, and anticancer properties, have been confirmed by many studies. The unique characteristics of chitosan, especially chitosan nanocarriers, have led to the expansion of using chitosan in various sectors, especially in biomedical sciences and food industries. On the other hand, essential oils, known as volatile and aromatic compounds of plants, have attracted the attention of researchers in recent years. Like chitosan, essential oils have various biological activities, including antimicrobial, antioxidant, and anticancer. In recent years, one of the ways to improve the biological properties of chitosan is to use essential oils encapsulated in chitosan nanocarriers. Among the various biological activities of chitosan nanocarriers containing essential oils, most studies conducted in recent years have been in the field of antimicrobial activity. It was documented that the antimicrobial activity was increased by reducing the size of chitosan particles in the nanoscale. In addition, the antimicrobial activity was intensified when essential oils were in the structure of chitosan nanoparticles. Essential oils can increase the antimicrobial activity of chitosan nanoparticles with synergistic effects. Using essential oils in the structure of chitosan nanocarriers can also improve the other biological properties (antioxidant and anticancer activities) of chitosan and increase the application fields of chitosan. Of course, using essential oils in chitosan nanocarriers for commercial use requires more studies, including stability during storage and effectiveness in real environments. This review aims to overview recent studies on the biological effects of essential oils encapsulated in chitosan nanocarriers, with notes on their biological mechanisms.

Biodegradable starch-based packaging films incorporated with polyurethane-encapsulated essential-oil microcapsules for sustained food preservation

Novel starch-based packaging films with sustained antibacterial activity were successfully made by incorporating polyurethane-encapsulated essential-oil microcapsules (EOs@PU) as an alternative synthetic preservative for food preservation. Herein, three essential oils (EOs) were blended to make composite essential oils with a more harmonious aroma and higher antibacterial ability and encapsulated into polyurethane (PU) to form EOs@PU microcapsules based on interfacial polymerization. The morphology of the constructed EOs@PU microcapsules was regular and uniform with an average size of approximately 3 μm, thus enabling high loading capacity (59.01 %). As such, we further integrated the obtained EOs@PU microcapsules into potato starch to prepare food packaging films for sustained food preservation. Consequently, the prepared starch-based packaging films incorporated with EOs@PU microcapsules had an excellent UV blocking rate (>90 %) and low cell toxicity. Notably, the long-term release of EOs@PU microcapsules gave the packaging films a sustained antibacterial ability, prolonging the shelf life of fresh blueberries and raspberries at 25 °C (> 7 days). Furthermore, the biodegradation rate of food packaging films cultured with natural soil was 95 % after 8 days, clarifying the excellent biodegradability of the packaging films for environmental protection. As demonstrated, the biodegradable packaging films provided a natural and safe strategy for food preservation.

Application of chitosan nanoparticles in quality and preservation of postharvest fruits and vegetables: A review

Chitosan is an interesting alternative material for packaging development due to its biodegradability. However, its poor mechanical properties and low permeability limit its actual applications. Chitosan nanoparticles (CHNPs) have emerged as a suitable solution to overcome these intrinsic limitations. In this review, all studies regarding the use of CHNPs to extend the shelf life and improve the quality of postharvest products are covered. The characteristics of CHNPs and their combinations with essential oils and metals, along with their effects on postharvest products, are compared and discussed throughout the manuscript. CHNPs enhanced postharvest antioxidant capacity, extended shelf life, increased nutritional quality, and promoted tolerance to chilling stress. Additionally, the CHNPs reduced the incidence of postharvest phytopathogens. In most instances, smaller CHNPs (<150 nm) conferred higher benefits than larger ones (>150 nm). This was likely a result of the greater plant tissue penetrability and surface area of the smaller CHNPs. The CHNPs were either applied after preparing an emulsion or incorporated into a film, with the latter often exhibiting greater antioxidant and antimicrobial activities. CHNPs were used to encapsulate essential oils, which could be released over time and may enhance the antioxidant and antimicrobial properties of the CHNPs. Even though most applications were performed after harvest, preharvest application had longer lasting effects.

Postharvest physiology and biochemistry of Valencia orange after coatings with chitosan nanoparticles as edible for green mold protection under room storage conditions

Because of their unique features, nanomaterials have been proposed and have gained acceptance in postharvest applications in fruit. Increasing the storage life and improving the quality of Valencia oranges was investigated using nano-chitosan. A chitosan nanoparticle was prepared by using high-energy ball milling. Chitosan nanoparticles were characterized by Dynamic light scattering, FTIR spectroscopy and Surface morphology by transmission electron microscopy. Fully mature Valencia oranges were harvested and then coated with one of these concentrations (0.2, 0.4, and 0.8% nano-chitosan) and control. The fruits were stored under room storage conditions for 75 days. The quality parameters (fruit weight losses, fruit decay percentage, fruit firmness, total acidity, total soluble solids percentage and T.S.S./acid ratio, ascorbic acid content) were taken in biweekly intervals after 0, 15, 30, 45, 60, and 75 days. Beside the in vitro testing of antifungal activity of chitosan nanoparticles. According to the findings of the two succeeding seasons, the nano-chitosan 0.8% treatment showed the best effects and had the lowest rate of fruit weight loss, fruit deterioration, and T.S.S./acid ratio in comparison to the other treatments in both seasons. Furthermore, the 0.8% nano-chitosan reveled the highest levels of fruit hardness and fruit pulp firmness. Fruit weight loss, fruit deterioration, TSS, and TSS/acid ratio, as well as other metrics, were steadily elevated prior to the storage time. The best results were obtained when Valencia oranges fruits were treated with 0.8% nano-chitosan for 75 days at room temperature.

Recent advances in nutritional composition, phytochemistry, bioactive, and potential applications of Syzygium aromaticum L. (Myrtaceae)

Syzygium aromaticum is an aromatic plant native to Indonesia, and introduced to tropical regions worldwide. As an ingredient in perfumes, lotions, and food preservation, it is widely used in the food and cosmetic industries. Also, it is used to treat toothache, ulcers, type 2 diabetes, etc. A variety of nutrients such as amino acids, proteins, fatty acids, and vitamins are found in S. aromaticum. In addition to eugenol, isoeugenol, eugenol acetate, β-caryophyllene and α-humulene are the main chemical constituents. The chemical constituents of S. aromaticum exhibit a wide range of bioactivities, such as antioxidant, antitumor, hypoglycemic, immunomodulatory, analgesic, neuroprotective, anti-obesity, antiulcer, etc. This review aims to comprehend the information on its taxonomy and botany, nutritional composition, chemical composition, bioactivities and their mechanisms, toxicity, and potential applications. This review will be a comprehensive scientific resource for those interested in pursuing further research to explore its value in food.

Preparation and characterization of a novel nanoemulsion consisting of chitosan and Cinnamomum tamala essential oil and its effect on shelf-life lengthening of stored millets

This study aimed to improve the stability of Cinnamomum tamala essential oil (CTEO) via encapsulating into chitosan nanoemulsion (CsNe) through an ionic-gelation technique and explore its food preservative efficacy against aflatoxigenic strain of Aspergillus flavus (AFLHPSi-1, isolated from stored millet), aflatoxin B₁ (AFB₁) contamination, and lipid peroxidation, causing qualitative deterioration of stored millets. The CTEO was characterized through gas chromatography-mass spectrometry (GC-MS) analysis that confirmed the presence of linalool as a major component occupying approximately 82.64% of the total oil. The synthesized nanoparticles were characterized through scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analysis. The encapsulation efficiency (EE) and loading capacity (LC) of CTEO-CsNe were found to be 97.71% and 3.33%, respectively. In vitro release study showed a biphasic release pattern: with an initial burst release followed by a controlled release of CTEO. During investigation of efficacy, the CTEO-CsNe caused complete inhibition of A. flavus growth, and AFB₁ biosynthesis at 1.0 and 0.8 μL/mL, respectively. The CTEO-CsNe exhibited its antifungal mode of action by altering fungal plasma membrane integrity (ergosterol inhibition) and permeability (leakage of important cellular constituents), and antiaflatoxigenic mode of action by inhibiting cellular methylglyoxal biosynthesis. CTEO-CsNe showed high free radical scavenging capacity (IC₅₀ = 5.08 and 2.56 μL/mL) against DPPH^•+ and ABTS^•+ radicals, respectively. In addition, CTEO-CsNe presented remarkable preservative efficacy, inhibiting AFB₁ and lipid peroxidation in model food system (Setaria italica) without altering their organoleptic properties. Based on overall results, CTEO-CsNe can be recommended as a novel shelf-life enhancer of stored millet samples.

Nano-Size Characterization and Antifungal Evaluation of Essential Oil Molecules-Loaded Nanoliposomes

Nanoliposomes, bilayer vesicles at the nanoscale, are becoming popular because of their safety, patient compliance, high entrapment efficiency, and prompt action. Several notable biological activities of natural essential oils (EOs), including fungal inhibition, are of supreme interest. As developed, multi-compositional nanoliposomes loaded with various concentrations of clove essential oil (CEO) and tea tree oil (TTO) were thoroughly characterized to gain insight into their nano-size distribution. The present work also aimed to reconnoiter the sustainable synthesis conditions to estimate the efficacy of EOs in bulk and EO-loaded nanoliposomes with multi-functional entities. Following a detailed nano-size characterization of in-house fabricated EO-loaded nanoliposomes, the antifungal efficacy was tested by executing the mycelial growth inhibition (MGI) test using Trichophyton rubrum fungi as a test model. The dynamic light scattering (DLS) profile of as-fabricated EO-loaded nanoliposomes revealed the mean size, polydispersity index (PdI), and zeta potential values as 37.12 ± 1.23 nm, 0.377 ± 0.007, and -36.94 ± 0.36 mV, respectively. The sphere-shaped morphology of CEO and TTO-loaded nanoliposomes was confirmed by a scanning electron microscope (SEM). The existence of characteristic functional bands in all tested counterparts was demonstrated by attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. Compared to TTO-loaded nanoliposomes, the CEO-loaded nanoliposomes exhibited a maximum entrapment efficacy of 91.57 ± 2.5%. The CEO-loaded nanoliposome fraction, prepared using 1.5 µL/mL concentration, showed the highest MGI of 98.4 ± 0.87% tested against T. rubrum strains compared to the rest of the formulations.

Application of Aloe vera Gel Coating Enriched with Cinnamon and Rosehip Oils to Maintain Quality and Extend Shelf Life of Pomegranate Arils

A completely randomized design was applied on pomegranate arils for several post-harvest treatments before the packaging in polypropylene boxes for 15 days at (5 ± 1 °C, 95 ± 2% RH): control (untreated), Aloe vera gel (10% or 20%), 10% Aloe vera + rosehip oil (0.25% or 0.50%), 20% Aloe vera + rosehip oil (0.25% or 0.50%), 10% Aloe vera + cinnamon oil (0.25% or 0.50%), and 20% Aloe vera + cinnamon oil (0.25% or 0.50%). Aloe vera in combination with cinnamon oil resulted in an enhanced shelf life (15 d) compared to the uncoated arils (control). The Aloe vera + cinnamon oil coating led to the retention of total phenolics, anthocyanin, ascorbic acid, and antioxidant activity in context to the quality attributes. Moreover, this coating showed minimal change in the color, total soluble solids, titratable acidity, firmness, delayed ethylene production, respiration rate, and physiological weight loss. Also, A. vera + cinnamon oil coatings significantly (p < 0.05) inhibited the total counts of mesophilic aerobics, coliforms, and yeast and mold. Organoleptic attributes, including color, flavor, aroma, texture, and purchase acceptability were higher for the arils that were treated with 10% A. vera + 0.25% cinnamon oil; thus, this highly economical and easily available coating material can be formulated and used commercially to extend the shelf life and enhance the profit of the producers and/or processors.

Recent development in nanoencapsulation and delivery of natural bioactives through chitosan scaffolds for various biological applications

Nowadays, nano/micro-encapsulation as a pioneering technique may significantly improve the bioavailability and durability of Natural bioactives. For this purpose, chitosan as a bioactive cationic natural polysaccharide has been frequently used as a carrier because of its distinct chemical and biological properties, including polycationic nature, biocompatibility, and biodegradability. Moreover, polysaccharide-based nano/micro-formulations are a new and extensive trend in scientific research and development in the disciplines of biomedicine, bioorganic/ medicinal chemistry, pharmaceutics, agrochemistry, and the food industry. It promises a new paradigm in drug delivery systems and nanocarrier formulations. This review aims to summarize current developments in approaches for designing innovative chitosan micro/nano-matrix, with an emphasis on the encapsulation of natural bioactives. The special emphasis led to a detailed integrative scientific achievement of the functionalities and abilities for encapsulating natural bioactives and mechanisms regulated in vitro/in vivo release in various biological/physiological environments.

Encapsulation of Essential Oils in Nanocarriers for Active Food Packaging

Active packaging improves a packaging system's effectiveness by actively integrating additional components into the packaging material or the headspace around the packaging. Consumer demand and awareness have grown enough to replace chemical agents with natural active agents. Essential oils (EOs) are extensively distributed throughout nature but at low levels and sometimes with poor recovery yields, which poses an issue with their application in food. Due to the instability of EOs when added directly into a food product, they require encapsulation before being added to a packaging matrix such as liposomes, solid-lipid nanoparticles, nano-emulsions, cyclodextrins, and nanostructured lipid nano-carriers. This article is focused on the encapsulation of EOs in different types of nanocarriers. Nanocarriers can improve the efficiency of active substances by providing protection, stability, and controlled and targeted release. The advantages of the many types of nanocarriers that contain active substances that can be used to make antibacterial and antioxidant biopolymeric-based active packaging are discussed. A nanocarrier-encapsulated EO enables the controlled release of oil, stabilizing the packaging for a longer duration.

Chitosan-Cinnamon Oil Coating Maintains Quality and Extends Shelf Life of Ready-to-Use Pomegranate Arils under Low-Temperature Storage

Different formulations of chitosan (1%, 2%, or 3%) with the incorporation of cinnamon oil (0.25% or 0.50%) were prepared for the preservation of pomegranate aril cv. Bhagwa. Six combinations of chitosan-cinnamon oil formulations along with one control (untreated) were applied to the freshly extracted arils using the dipping application method. All treatments were found to be effective in enhancing the shelf life, improving the postharvest characteristics, and reducing microbial populations on pomegranate arils during a 15-day storage period at 4 ± 1°C. The treated pomegranate arils exhibited excellent resistance to microbial decay, moisture loss, respiration rate, preservation of phenolics, flavonoids, and antioxidants activity, among other characteristics. Chitosan 2% + cinnamon oil 0.25% edible coating has a high potential to enhance the storage life and biochemical properties and reduce the microbial population of arils. This treatment recorded a higher total phenolic content (18%) and antioxidant activity (16%) than the control sample, respectively, at the end of storage. In addition, the treatment also helped to decrease the microbial activity by 45% compared to the control sample. The present investigation proposed an alternative method to prolong the shelf life of pomegranate arils during the 15 days of storage.

Preparation of a biodegradable chitosan packaging film based on zinc oxide, calcium chloride, nano clay and poly ethylene glycol incorporated with thyme oil for shelf-life prolongation of sweet cherry

This study includes development of chitosan-based films with incorporated essential thyme oil and different combinations of cross-linkers viz., ZnO, CaCl₂, NC, and PEG for the safe storage of sweet cherries. The resulting films stored with sweet cherries were analyzed for different physicochemical and antimicrobial properties. Incorporation of ZnO, CaCl₂, NC, and PEG in chitosan-based films maintained fruit quality by conserving higher total soluble solids, titratable acidity, and reduced weight loss. The combined ZnO + CaCl₂ + NC + PEG in chitosan-based films also suppressed microbial activity. The sensorial quality of fruits stored with CH + ZnO + CaCl₂ + NC + PEG treatment was also stable during storage. In conclusion, the combined CH + ZnO + CaCl₂ + NC + PEG with added thyme oil application is an effective approach to maintain the postharvest quality and could be an alternative to increase the shelf life of sweet cherries, besides decreasing environmental impacts of non-biodegradable packages.

Exogenous Arginine Treatment Maintains the Appearance and Nutraceutical Properties of Hard- and Soft-Seed Pomegranates in Cold Storage

Arginine is a natural preservative; however, its effects on the storage of different cultivars of pomegranates have not been investigated extensively. Therefore, the fruit quality of soft-seed Tunisia and hard-seed Yudazi pomegranates was investigated after treatment with arginine at four concentrations during cold storage for 80 days. Pomegranates treated with 1.0 mM arginine exhibited a relatively lower loss of vitamin C, soluble solid, total phenol, and anthocyanin contents in arils, together with a better fruit appearance. Combined with principal component analysis (PCA), the storage life of fruits treated with 1.0 mM arginine showed a higher correlation with antioxidant enzyme activity (e.g., superoxide dismutase (SOD), ascorbate peroxidase (APX), and catalase (CAT)) during the first 40 days of cold storage, whereas after 40 days of cold storage, storage life was more dependent on the integrity of the cell membrane affected by malondialdehyde (MDA) content, electrolyte leakage (EL), and hydrogen peroxide (H2O2) accumulation. Arginine treatment contributed significantly to the appearance and inner quality of the hard-seed pomegranate cv. Yudazi fruit during cold storage compared to those of soft-seed Tunisia. Taken together, arginine application combined with cold storage enhanced the nutraceutical properties and marketability of pomegranate fruits.

Potential of engineered nanostructured biopolymer based coatings for perishable fruits with Coronavirus safety perspectives

Fresh fruits are prioritized needs in order to fulfill the required health benefits for human beings. However, some essential fruits are highly perishable with very short shelf-life during storage because of microbial growth and infections. Thus improvement of fruits shelf-life is a serious concern for their proper utlization without generation of huge amount of fruit-waste. Among various methods employed in extension of fruits shelf-life, design and fabrication of edible nanocoatings with antimicrobial activities have attracted considerable interest because of their enormous potential, novel functions, eco-friendly nature and good durability. In recent years, scientific communities have payed increased attention in the development of advanced antimicrobial edible coatings to prolong the postharvest shelf-life of fruits using hydrocolloids. In this review, we attempted to highlight the technical breakthrough and recent advancements in development of edible fruit coating by the application of various types of agro-industrial residues and different active nanomaterials incorporated into the coatings and their effects on shelf-life of perishable fruits. Improvements in highly desired functions such as antioxidant/antimicrobial activities and mechanical properties of edible coating to significantly control the gases (O2/CO2) permeation by the incorporation of nanoscale natural materials as well as metal nanoparticles are reviewed and discussed. In addition, by compiling recent knowledge, advantages of coatings on fruits for nutritional security during COVID-19 pandemic are also summarized along with the scientific challenges and insights for future developments in fabrication of engineered nanocoatings.