Anthocyanin-rich extract of jabuticaba epicarp as a natural colorant: Optimization of heat- and ultrasound-assisted extractions and application in a bakery product

Ultrasound-driven chemical and biochemical changes in jabuticaba juice: Phenolic compounds, volatile profile and inactivation of polyphenol oxidase, peroxidase and pectin methylesterase

Fruit juices are widely recognized as excellent vehicles for bioactive compounds, offering both nutritional and health-promoting benefits. Among these, jabuticaba (Myrciaria jaboticaba) stands out as a fruit exceptionally rich in phenolic compounds, particularly anthocyanins. This study evaluated the effects of thermal (90 °C/1 min and 120 °C/1 min) and high-intensity ultrasound (HIUS) treatments (6.3, 15.9, 25.5, and 36 W/cm2) on the physicochemical properties, polyphenol oxidase (PPO), peroxidase (POD), and pectin methylesterase (PME) inactivation, phenolic and volatile compound profiles, antimicrobial potential, and kinetic stability of jabuticaba juice. Compared to thermal processing, HIUS demonstrated superior anthocyanin retention and phenolic stability while effectively inactivating enzymes. HIUS at 25.5 and 36 W/cm2 increased cyanidin-3-O-glucoside content (up to a 40 % increase), whereas the 120 °C/1 min thermal treatment reduced it by 58 %, highlighting the susceptibility of anthocyanins to intense heat. Regarding phenolic acids, HIUS maintained ellagic acid levels and increased gallic acid content at higher intensities (up to a 55 % increase), whereas 120 °C/1 min significantly increased gallic acid and ellagic acid, likely due to thermal degradation and release of bound phenolics. The antimicrobial properties of jabuticaba juice were assessed through microbial growth analysis and challenge testing with Lacticaseibacillus paracasei, revealing its potential to contribute to microbial stability in juice formulations. HIUS at 25.5 W/cm2 was identified as the optimal processing condition, balancing enzymatic inactivation, bioactive compound retention, and physical stability, while avoiding the anthocyanin degradation observed in intense thermal treatments. These findings underscore the potential of HIUS as a nonthermal alternative for producing high-quality, functional jabuticaba juice and provide valuable insights into optimizing processing parameters to maximize bioactive compound retention and kinetic stability in fruit-based beverages.

Optimization of heat and ultrasound-assisted extraction of Eucalyptus globulus leaves reveals strong antioxidant and antimicrobial properties

The extraction of phenolic compounds from eucalyptus leaves was optimized using heat and ultrasound-assisted techniques, and the bioactive potential of the resulting extract was assessed. The independent variables, including time (t), solvent concentration (S), and temperature (T) or power (P), were incorporated into a five-level central composite design combined with Response Surface Methodology. Phenolic content was determined by HPLC-DAD-ESI/MS and used as response criteria. The developed models were successfully fitted to the experimental data to identify the optimal extraction conditions. Heat-assisted extraction proved to be the most efficient method for phenolic recovery, yielding 27 ± 2 mg/g extract under optimal conditions (120 min, 76.5 °C, and 25 % ethanol, v/v). The extracts exhibited a high concentration of phenolic glycoside derivatives, including gallotannin, quercetin, and isorhamnetin. These findings suggest that the extracts hold promise as natural additives in food technology, owing to their moderate antimicrobial activity and strong antioxidant properties.

Functional compounds in tropical fruit processing by-products and intrinsic factors affecting their composition: A review

Tropical fruits, highly demanded in the food industry, generate a considerable amount of waste during processing. These traditionally discarded by-products, such as peels, seeds and pomace, are rich in bioactive compounds, natural molecules that have beneficial properties for human health, as they participate in various metabolic processes in the organism. Among the most prominent compounds are flavonoids, carotenoids, phenolic compounds, tannins and vitamin C. Beyond their health benefits, these compounds have significant industrial value and are widely used in the textile, pharmaceutical, cosmetic, biotechnological and food fields, in the latter especially as preservatives, additives, colorants and others. This review explores the main bioactive compounds found in fruit by-products, highlighting their functional relevance and analyzing the intrinsic or fruit-derived factors that influence the composition of these compounds, such as the type of by-product (peels, seeds, bagasse, pomace), the variety of fruit, and the state of maturity at the time of processing. In addition, the extraction methods used to obtain these compounds are addressed, differentiating between conventional techniques, such as solvent extraction, and emerging methods, such as ultrasound-assisted extraction and supercritical fluid extraction, which offer advantages in terms of efficiency and sustainability. The diversity of bioactive compounds and their potential application in various industries highlight the importance of ongoing research in this field. It is necessary to further study the factors that influence the composition of these compounds, as well as the development of more efficient and sustainable extraction methods. These advances will not only add value to food industry waste, but will also contribute to the development of natural products with health benefits.

Innovative approaches to harnessing natural pigments from food waste and by-products for eco-friendly food coloring

With unprecedented growth in the world population, the demand for food has risen drastically leading to increased agricultural production. One promising avenue is recovery of value-added pigments from food waste which has been gaining global attention. This review focuses on sustainable strategies for extracting pigments, examining the factors that influence extraction, their applications, and consumer acceptability. The significant findings of the study state the efficiency of pigment extraction through innovative extraction techniques rather than following conventional methods that are time-consuming, and unsustainable. In addition to their vibrant colors, these pigments provide functional benefits such as antioxidant properties, extended shelf life and improved food quality. Societal acceptance of pigments derived from food waste is positively driven by environmental awareness and sustainability. The study concludes by highlighting the stability challenges associated with various natural pigments, emphasizing the need for tailored stabilization methods to ensure long-term stability and effective utilization in food matrices.

Natural and Synthetic Flavylium Derivatives: Isolation/Synthesis, Characterization and Application

Given the natural origins of flavylium derivatives, their chemical modifications, and their large potential uses in food, medicine, or green chemistry, the present review is a comprehensive study of flavylium-derived compounds. Several topics such as the green extraction and isolation techniques of flavylium derivatives including their chemical modifications and various characterization tools such as NMR, HPLC, and mass spectrometry are discussed in the review. Furthermore, the use of these derivatives in medicine, food, and materials science is presented, highlighting their relevance and the need for further investigation. Therefore, by examining the advantages and disadvantages of natural and synthetic sources, the review asserts the increased relevance of flavylium-based compounds in active molecules.

Developing High-Coloring Natural Systems Using Double Emulsions with Daucus carota L. Extract to Meet High-Performance Requirements

Daucus carota L. extract is attracting interest as a natural colorant alternative. However, the presence of anthocyanins (ACNs), which are sensitive to pH changes, limits its application. To tackle this issue, water-in-oil-in-water (W1/O/W2) double emulsions are emerging as innovative solutions. Nevertheless, the problem of reaching robust colorant systems for industrial use still needs to be overcome. One important target is to reach a high coloring power, minimizing its impact on the final product. In this context, the effect of colorant concentration and the volume of the primary emulsion, two routes to increase the colorant power, on color attributes and stability, an important feature to reach a marketable product, was studied. The optimal experimental design was conducted to two optimal solutions, whether through heightened colorant concentration or primary emulsion volume: a 41/59 (W1/O)/W2 ratio with 11 wt.% colorant, and a 48/52 (W1/O)/W2 ratio with 6 wt.% colorant, respectively. A subsequent assessment of color and physical emulsion stability over 30 days pointed out the solution with the lower colorant concentration (6 wt.%) as the one with better performance (L*: 44.11 ± 0.03, a*: 25.79 ± 0.01, D4;3: 9.62 ± 0.1 µm, and CI: 14.55 ± 0.99%), also minimizing the permeability of the colorant to the outer aqueous phase. Overall, these optimized emulsions offer versatile coloring solutions suitable for various industrial applications, such as food matrices and functional cosmetics.

Natural pigments in the food industry: Enhancing stability, nutritional benefits, and gut microbiome health

Natural pigments are increasingly favored in the food industry for their vibrant colors, fewer side effects and potential health benefits compared to synthetic pigments. However, their application in food industry is hindered by their instability under harsh environmental conditions. This review evaluates current strategies aimed at enhancing the stability and bioactivity of natural pigments. Advanced physicochemical methods have shown promise in enhancing the stability of natural pigments, enabling their incorporation into food products to enhance sensory attributes, texture, and bioactive properties. Moreover, recent studies demonstrated that most natural pigments offer health benefits. Importantly, they have been found to positively influence gut microbiota, in particular their regulation of the beneficial and harmful flora of the gut microbiome, the reduction of ecological dysbiosis through changes in the composition of the gut microbiome, and the alleviation of systemic inflammation caused by a high-fat diet in mice, suggesting a beneficial role in dietary interventions.

Coupling of cold atmospheric plasma treatment with ultrasound-assisted extraction for enhanced recovery of bioactive compounds from cornelian cherry pomace

Cornelian cherry pomace is produced during the production of juice from this traditional superfood. Due to its high nutritive value, the by-product can be utilized as a source of bioactive compounds. The present study aimed to develop a sustainable methodology for the recovery of bioactive compounds based on the combination of atmospheric cold plasma (CAP) with ultrasound assisted extraction. The pomace was treated with cold plasma under different conditions. Cyclodextrin was used as green extraction enhancer due to its capacity to develop inclusion complexes with bioactive compounds. CAP pretreatment before extraction appeared to enhance the recovery of the target compounds. GC-MS analysis and in vitro digestion analysis conducted in order to evaluate the composition and the protentional bioavailability of the bioactive compounds. CHEMICALS COMPOUNDS: β-cyclodextrin (PubChem CID: 444041), DPPH free radical (PubChem CID: 2735032), Trolox (PubChem CID: 40634), sodium carbonate (PubChem CID: 10340), gallic acid (PubChem CID: 370) potassium chloride (PubChem CID: 4873), sodium acetate (PubChem CID: 517045), loganic acid (PubChem CID: 89640), pyridine (PubChem CID: 1049, BSTFA(PubChem CID: 94358), potassium chloride (PubChem CID: 4873), ammonium carbonate (PubChem CID: 517111), calcium chloride dehydrate (PubChem CID: 24844), potassium dihydrogen phosphate (PubChem CID: 516951), magnesium chloride hexahydrate (PubChem CID: 24644), sodium hydrogen carbonate (PubChem CID: 516892), sodium chloride (PubChem CID: 5234).

Recent advances on cyanidin-3-O-glucoside in preventing obesity-related metabolic disorders: A comprehensive review

Anthocyanins, found in various pigmented plants as secondary metabolites, represent a class of dietary polyphenols known for their bioactive properties, demonstrating health-promoting effects against several chronic diseases. Among these, cyanidin-3-O-glucoside (C3G) is one of the most prevalent types of anthocyanins. Upon consumption, C3G undergoes phases I and II metabolism by oral epithelial cells, absorption in the gastric epithelium, and gut transformation (phase II & microbial metabolism), with limited amounts reaching the bloodstream. Obesity, characterized by excessive body fat accumulation, is a global health concern associated with heightened risks of disability, illness, and mortality. This comprehensive review delves into the biodegradation and absorption dynamics of C3G within the gastrointestinal tract. It meticulously examines the latest research findings, drawn from in vitro and in vivo models, presenting evidence underlining C3G's bioactivity. Notably, C3G has demonstrated significant efficacy in combating obesity, by regulating lipid metabolism, specifically decreasing lipid synthesis, increasing fatty acid oxidation, and reducing lipid accumulation. Additionally, C3G enhances energy homeostasis by boosting energy expenditure, promoting the activity of brown adipose tissue, and stimulating mitochondrial biogenesis. Furthermore, C3G shows potential in managing various prevalent obesity-related conditions. These include cardiovascular diseases (CVD) and hypertension through the suppression of reactive oxygen species (ROS) production, enhancement of endogenous antioxidant enzyme levels, and inhibition of the nuclear factor-kappa B (NF-κB) signaling pathway and by exercising its cardioprotective and vascular effects by decreasing pulmonary artery thickness and systolic pressure which enhances vascular relaxation and angiogenesis. Type 2 diabetes mellitus (T2DM) and insulin resistance (IR) are also managed by reducing gluconeogenesis via AMPK pathway activation, promoting autophagy, protecting pancreatic β-cells from oxidative stress and enhancing glucose-stimulated insulin secretion. Additionally, C3G improves insulin sensitivity by upregulating GLUT-1 and GLUT-4 expression and regulating the PI3K/Akt pathway. C3G exhibits anti-inflammatory properties by inhibiting the NF-κB pathway, reducing pro-inflammatory cytokines, and shifting macrophage polarization from the pro-inflammatory M1 phenotype to the anti-inflammatory M2 phenotype. C3G demonstrates antioxidative effects by enhancing the expression of antioxidant enzymes, reducing ROS production, and activating the Nrf2/AMPK signaling pathway. Moreover, these mechanisms also contribute to attenuating inflammatory bowel disease and regulating gut microbiota by decreasing Firmicutes and increasing Bacteroidetes abundance, restoring colon length, and reducing levels of inflammatory cytokines. The therapeutic potential of C3G extends beyond metabolic disorders; it has also been found effective in managing specific cancer types and neurodegenerative disorders. The findings of this research can provide an important reference for future investigations that seek to improve human health through the use of naturally occurring bioactive compounds.

The amazing native Brazilian fruits

A number of native Brazilian plant species are under exploited by the scientific community, despite the country's precious biodiversity. The vast majority of native Brazilian fruits (NBF) is source of compounds that provide many health benefits and can potentially be used to prevent diseases and formulate high-added value products. This review covers the scientific research over the last decade (2012-2022) on eight NBF, and focuses on information about the production and market panorama, physical description, physicochemical characterization, nutritional composition, their functional value of bioactive compounds and health benefits, as well as the potential for utilizations for each. The studies herein compiled reveal the outstanding nutritional value of these NBF. They are sources of vitamins, fibers, minerals and bioactive compounds that exhibit antioxidant activity, and they contain phytochemicals with anti-inflammatory action, anti-obesity and other functions that bring many health benefits to consumers. NBF can be also used as raw material for multiple products such as nectars, juices, jams, frozen pulps, liquor, among others. The dissemination of knowledge about NBF has fundamental implications worldwide.

Natural Pigments Recovery from Food By-Products: Health Benefits towards the Food Industry

Given the health risks associated with synthetic colorants, natural pigments have emerged as a promising alternative. These renewable choices not only provide health benefits but also offer valuable technical and sensory properties to food systems. The effective application of natural colorants, however, requires the optimization of processing conditions, exploration of new sources, and development of novel formulations to ensure stability and maintain their inherent qualities. Several natural pigment sources have been explored to achieve the broad color range desired by consumers. The purpose of this review is to explore the current advances in the obtention and utilization of natural pigments derived from by-products, which possess health-enhancing properties and are extracted through environmentally friendly methods. Moreover, this review provides new insights into the extraction processes, applications, and bioactivities of different types of pigments.

Dietary Sources, Stabilization, Health Benefits, and Industrial Application of Anthocyanins-A Review

Natural phytochemicals are well known to protect against numerous metabolic disorders. Anthocyanins are vacuolar pigments belonging to the parent class of flavonoids. They are well known for their potent antioxidant and gut microbiome-modulating properties, primarily responsible for minimizing the risk of cardiovascular diseases, diabetes, obesity, neurodegenerative diseases, cancer, and several other diseases associated with metabolic syndromes. Berries are the primary source of anthocyanin in the diet. The color and stability of anthocyanins are substantially influenced by external environmental conditions, constraining their applications in foods. Furthermore, the significantly low bioavailability of anthocyanins greatly diminishes the extent of the actual health benefits linked to these bioactive compounds. Multiple strategies have been successfully developed and utilized to enhance the stability and bioavailability of anthocyanins. This review provides a comprehensive view of the recent advancements in chemistry, biosynthesis, dietary sources, stabilization, bioavailability, industrial applications, and health benefits of anthocyanins. Finally, we summarize the prospects and challenges of applications of anthocyanin in foods.

Application of ultrasound technology for the effective management of waste from fruit and vegetable

Food waste presents a continuous challenge for the food industry, leading to environmental pollution and economic issues. A substantial amount of waste, including by-products from fruits and vegetables, non-edible food items, and other waste materials, is produced throughout the food supply chain, from production to consumption. Recycling and valorizing waste from perishable goods is emerging as a key multidisciplinary approach within the circular bio-economy framework. This waste, rich in raw by-products, can be repurposed as a natural source of ingredients. Researchers increasingly focus on biomass valorization to extract and use components that add significant value. Traditional methods for extracting these bio-compounds typically require the use of solvents and are time-consuming, underscoring the need for innovative techniques like ultrasound (US) extraction. Wastes from the processing of fruits and vegetables in the food industry can be used to develop functional foods and edible coatings, offering protection against various environmental factors. This comprehensive review paper discusses the valorization of waste from perishable items like fruits and vegetables using US technology, not only to extract valuable components from waste but also to treat wastewater in the beverage industry. It also covers the application of biomolecules recovered from this process in the development of functional foods and packaging.

Obtaining and characterizing polyphenol extracts based on anthocyanins from Melinis minutiflora inflorescences and Plinia cauliflora fruits and application in gelatins

Anthocyanins are a class of compounds potentially used as food dyes. Thus, this study aimed to obtain and characterize natural extracts from Melinis minutiflora inflorescence (M), Plinia. cauliflora peel (JP) and P. cauliflora peel and seeds (JPS) and apply them as natural food dyes in gelatins. The extracts did not show statistically significant differences in pH values and water activity. The M and JPS extracts showed similar values of anthocyanins and total phenolic compounds and were higher than those from the JP extract. The M and JPS extracts showed a bathochromic effect, which was not observed for the JP extract. The bathochromic effect may indicate a possible complexation of anthocyanins. The color composition analysis revealed that the JP extract has a higher absorbance at a wavelength of 520 nm, indirectly suggesting the presence of more monomeric anthocyanins in its composition. The extract application test in gelatin did not change the texture properties of the gelatins. In addition, our findings revealed that the JPS extract had the best color stability after ten days of analysis, indicating that anthocyanin complexation with the phenolic compounds of P. cauliflora seeds contributed more effectively to anthocyanin stability in the model used.

Ultrasound-Assisted Anthocyanins Extraction from Pigmented Corn: Optimization Using Response Surface Methodology

This study aimed to determine the optimal UAE conditions for extracting anthocyanins from pigmented corn using the Box-Behnken design (BBD). Six anthocyanins were identified in the samples and were used as response variables to evaluate the effects of the following working variables: extraction solvent pH (2-7), temperature (10-70 °C), solvent composition (0-50% methanol in water), and ultrasound power (20-80%). The extraction time (5-25 min) was evaluated for complete recovery. Response surface methodology suggested optimal conditions, specifically 36% methanol in water with pH 7 at 70 °C using 73% ultrasound power for 10 min. The method was validated with a high level of accuracy (>90% of recovery) and high precision (CV < 5% for both repeatability and intermediate precision). Finally, the proposed analytical extraction method was successfully applied to determine anthocyanins that covered a wide concentration range (36.47-551.92 mg kg-1) in several pigmented corn samples revealing potential varieties providing more health benefits.

Himalayan Sources of Anthocyanins and Its Multifunctional Applications: A Review

Anthocyanins, the colored water-soluble pigments, have increasingly drawn the attention of researchers for their novel applications. The sources of anthocyanin are highly diverse, and it can be easily extracted. The unique biodiversity of the Himalayan Mountain range is an excellent source of anthocyanin, but it is not completely explored. Numerous attempts have been made to study the phytochemical aspects of different Himalayan plants. The distinct flora of the Himalayas can serve as a potential source of anthocyanins for the food industry. In this context, this review is an overview of the phytochemical studies conducted on Himalayan plants for the estimation of anthocyanins. For that, many articles have been studied to conclude that plants (such as Berberis asiatica, Morus alba, Ficus palmata, Begonia xanthina, Begonia palmata, Fragaria nubicola, etc.) contain significant amounts of anthocyanin. The application of Himalayan anthocyanin in nutraceuticals, food colorants, and intelligent packaging films have also been briefly debated. This review creates a path for further research on Himalayan plants as a potential source of anthocyanins and their sustainable utilization in the food systems.

Production and Analytical Aspects of Natural Pigments to Enhance Alternative Meat Product Color

Color is a major feature that strongly influences the consumer's perception, selection, and acceptance of various foods. An improved understanding regarding bio-safety protocols, health welfare, and the nutritional importance of food colorants has shifted the attention of the scientific community toward natural pigments to replace their toxic synthetic counterparts. However, owing to safety and toxicity concerns, incorporating natural colorants directly from viable sources into plant-based meat (PBM) has many limitations. Nonetheless, over time, safe and cheap extraction techniques have been developed to extract the purified form of coloring agents from raw materials to be incorporated into PBM products. Subsequently, extracted anthocyanin has displayed compounds like Delphinidin-3-mono glucoside (D3G) at 3.1 min and Petunidin-3-mono glucoside (P3G) at 5.1 277, 515, and 546 nm at chromatographic lambda. Fe-pheophytin was successfully generated from chlorophyll through the ion exchange method. Likewise, the optical density (OD) of synthesized leghemoglobin (LegH) indicated that pBHA bacteria grow more rigorously containing ampicillin with a dilution factor of 10 after 1 h of inoculation. The potential LegH sequence was identified at 2500 bp through gel electrophoresis. The color coordinates and absorbance level of natural pigments showed significant differences (p < 0.05) with the control. The development of coloring agents originating from natural sources for PBM can be considered advantageous compared to animal myoglobin in terms of health and functionality. Therefore, the purpose of this study was to produce natural coloring agents for PBM by extracting and developing chlorophyll from spinach, extracting anthocyanins from black beans, and inserting recombinant plasmids into microorganisms to produce LegH.

Recent advancements in natural colorants and their application as coloring in food and in intelligent food packaging

Colorants are widely employed in the food industry as an essential ingredient in many products since color is one of the most valued attributes by consumers. Furthermore, the utilization of colorants is currently being extended to the food packaging technologies. The objective of this review was to compile recent information about the main families of natural coloring compounds, and to describe their real implications in food coloring. In addition, their technological use in different food systems (namely, bakery products, beverages, meat and meat products, and dairy products) and their utilization in intelligent packaging to monitor the freshness of foodstuffs with the aim of extending food shelf life and improving food properties was discussed. The potential of using natural colorant in different food to improve their color has been demonstrated, although color stability is still a challenging task. More interestingly, the application of intelligent colorimetric indicators to exhibit color changes with variations in pH can enable real-time monitoring of food quality.

Valorization of rambutan (Nephelium lappaceum L.) peel: Chemical composition, biological activity, and optimized recovery of anthocyanins

Chemical constituents and bioactive properties of rambutan (Nephelium lappaceum L.) peel were characterized and heat-/ultrasound-assisted extractions (HAE/UAE) of anthocyanins were optimized by response surface methodology. Five organic acids, the α-, γ-, and δ-tocopherol isoforms, and twenty-five fatty acids (36.8 % oleic acid) were identified, as well as a phenolic profile composed of ellagitannin derivatives, geraniin isomers, ellagic acid, and delphinidin-O derivatives. The extract showed antioxidant activity via lipid peroxidation (IC₅₀ = 2.79 ± 0.03 µg/mL) and oxidative hemolysis (IC₅₀ = 72 ± 2 µg/mL) inhibition, and displayed antibacterial and antifungal properties (MIC ≤ 1 mg/mL). On the other hand, no cytotoxicity was observed in tumor and non-tumor cell lines up to 400 µg/mL. The recovery of anthocyanins was more effective using HAE than UAE, allowing greater yields (16.2 mg/g extract) in just 3 min and using lower ethanol proportions. Overall, rambutan peel could be upcycled into bioactive ingredients and natural colorants for industrial applications.

Ultrasound-assisted enzymatic extraction of Scutellaria baicalensis root polysaccharide and its hypoglycemic and immunomodulatory activities

Scutellaria baicalensis is a medicinal plant possessing abundant bioactive polysaccharides. This study aimed to optimize the ultrasound-assisted enzymatic extraction of S. baicalensis root polysaccharide (SRP) and investigate its hypoglycemic and immunomodulatory activities. The optimal extraction conditions found in this study were as follows: cellulase concentration 165.6 U/mL, temperature 57.3 °C, liquid-solid ratio 44.8 mL/g, time 50 min, and ultrasonic power 225 W; with the yield reached up to 12.27 %. The ion exchange and gel filtration chromatographies were used to obtain a purified SRP. The carbohydrate content of SRP was 85.09 %, with a relatively high content of uronic acids (11.27 %). The SRP had a molecular weight of 89.7 kDa and was composed of eight monosaccharides. The inhibitory activity of SRP against α-amylase and α-glucosidase was determined. It was revealed that SRP could effectively inhibit these two enzymes with IC₅₀ values of 1.23 and 0.63 mg/mL, respectively. Finally, the immunomodulatory effect of SRP on the dendritic cell activation was investigated, and the expressions of MHC II, CD80, CD86, and CD40 increased by 1.56, 1.96, 1.75, and 1.70 times, respectively, by the SRP treatment. This work will provide a foundation for SRP's efficient extraction and utilization for diabetes and immune therapy.

EFFECTS OF COLD PLASMA ON CHLOROPHYLLS, CAROTENOIDS, ANTHOCYANINS, AND BETALAINS

Plasma is considered by several researchers to be the fourth state of matter. Cold plasma has been highlighted as an alternative to thermal treatments because heat induces less degradation of thermolabile bioactive compounds, such as natural pigments. In this review, we provide a compilation of the current information about the effects of cold plasma on natural pigments, such as the changes caused by plasma to the molecules of chlorophylls, carotenoids, anthocyanins, and betalains. As a result of the literature review, it is noted that can degrade cell membrane and promote damage to pigment storage sites; thereby releasing pigments and increasing their content in the extracellular space. However, the reactive species contained in the cold plasma can cause degradation of the pigments. Cold plasma is a promising technology for extracting pigments; however, case-by-case optimization of the extraction process is required.

UPLC-ESI-QTOF-MS/MS Analysis of the Phytochemical Compositions From Chaenomeles speciosa (Sweet) Nakai Fruits

Chaenomeles speciosa (Sweet) Nakai (C. speciosa Nakai) is a popular fruit widely used in China for its health-promoting properties. The presences of phytochemical compositions in the plants play an important role in the health benefits. Nevertheless, the detailed information of these ingredients is still unknown. Therefore, in this work, an untargeted analytical method based on ultra-high-performance liquid chromatography-quadrupole-time of flight coupled to mass spectrometry in two different ionization modes was used to qualitative the phytochemicals in C. speciosa Nakai, meanwhile, the anti-inflammatory activity of these phytochemicals was researched through detecting the inhibition of nitric oxide (NO) that was induced by lipopolysaccharide in RAW 264.7 murine macrophage cells. The results showed that there were totally 175 primary and secondary metabolites were identified in the fruit of C. speciosa Nakai, including phenols, terpenoids, flavonoids and other phyto-constituents. Actually, most compounds were described in C. speciosa Nakai fruits for the first time. Besides, the anti-inflammatory activity was measured by the result of NO inhibition rate, the consequence showed that the value of half-inhibitory concentration (IC50) was 365.208 μg/mL. These results indicate that C. speciosa Nakai is an efficient medicinal fruit, which owns various bioactivities and has the potential to treat various diseases.

Anthocyanins: Metabolic Digestion, Bioavailability, Therapeutic Effects, Current Pharmaceutical/Industrial Use, and Innovation Potential

In this work, various concepts and features of anthocyanins have been comprehensively reviewed, taking the benefits of the scientific publications released mainly within the last five years. Within the paper, common topics such as anthocyanin chemistry and occurrence, including the biosynthesis of anthocyanins emphasizing the anthocyanin formation pathway, anthocyanin chemistry, and factors influencing the anthocyanins' stability, are covered in detail. By evaluating the recent in vitro and human experimental studies on the absorption and bioavailability of anthocyanins present in typical food and beverages, this review elucidates the significant variations in biokinetic parameters based on the model, anthocyanin source, and dose, allowing us to make basic assumptions about their bioavailability. Additionally, special attention is paid to other topics, such as the therapeutic effects of anthocyanins. Reviewing the recent in vitro, in vivo, and epidemiological studies on the therapeutic potential of anthocyanins against various diseases permits a demonstration of the promising efficacy of different anthocyanin sources at various levels, including the neuroprotective, cardioprotective, antidiabetic, antiobesity, and anticancer effects. Additionally, the studies on using plant-based anthocyanins as coloring food mediums are extensively investigated in this paper, revealing the successful use of anthocyanins in coloring various products, such as dietary and bakery products, mixes, juices, candies, beverages, ice cream, and jams. Lastly, the successful application of anthocyanins as prebiotic ingredients, the innovation potential of anthocyanins in industry, and sustainable sources of anthocyanins, including a quantitative research literature and database analysis, is performed.

Biocolorants in food: Sources, extraction, applications and future prospects

Color of a food is one of the major factors influencing its acceptance by consumers. At presently synthetic dyes are the most commonly used food colorant in food industry by providing more esthetically appearance and as a means to quality control. However, the growing concern about health and environmental due to associated toxicity with synthetic food colorants has accelerated the global efforts to replace them with safer and healthy food colorants obtained from natural resources (plants, microorganisms, and animals). Further, many of these biocolorants not only provide myriad of colors to the food but also exert biological properties, thus they can be used as nutraceuticals in foods and beverages. In order to understand the importance of nature-derived pigments as food colorants, this review provides a thorough discussion on the natural origin of food colorants. Following this, different extraction methods for isolating biocolorants from plants and microbes were also discussed. Many of these biocolorants not only provide color, but also have many health promoting properties, for this reason their physicochemical and biological properties were also reviewed. Finally, current trends on the use of biocolorants in foods, and the challenges faced by the biocolorants in their effective utilization by food industry and possible solutions to these challenges were discussed.

Nature's palette: An emerging frontier for coloring dairy products

Consumers all across the world are looking for the most delectable and appealing foods, while also demanding products that are safer, more nutritious, and healthier. Substitution of synthetic colorants with natural colorants has piqued consumer and market interest in recent years. Due to increasing demand, extensive research has been conducted to find natural and safe food additives, such as natural pigments, that may have health benefits. Natural colorants are made up of a variety of pigments, many of which have significant biological potential. Because of the promising health advantages, natural colorants are gaining immense interest in the dairy industry. This review goes over the use of various natural colorants in dairy products which can provide desirable color as well as positive health impacts. The purpose of this review is to provide an in-depth look into the field of food (natural or synthetic) colorants applied in dairy products as well as their potential health benefits, safety, general trends, and future prospects  in food science and technology. In this paper, we listed a plethora of applications of natural colorants in various milk-based products.

Onion anthocyanins: Extraction, stability, bioavailability, dietary effect, and health implications

Anthocyanins are high-value compounds, and their use as functional foods and their natural colorant have potential health benefits. Anthocyanins seem to possess antioxidant properties, which help prevent neuronal diseases and thereby exhibit anti-inflammatory, chemotherapeutic, cardioprotective, hepatoprotective, and neuroprotective activities. They also show different therapeutic effects against various chronic diseases. Anthocyanins are present in high concentrations in onion. In recent years, although both conventional and improved methods have been used for extraction of anthocyanins, nowadays, improved methods are of great importance because of their higher yield and stability of anthocyanins. In this review, we compile anthocyanins and their derivatives found in onion and the factors affecting their stability. We also analyze different extraction techniques of anthocyanins. From this point of view, it is very important to be precisely aware of the impact that each parameter has on the stability and subsequently potentiate its bioavailability or beneficial health effects. We present up-to-date information on bioavailability, dietary effects, and health implications of anthocyanins such as antioxidant, antidiabetic, anticancerous, antiobesity, cardioprotective, and hepatoprotective activities.

Study on the mechanism of non-covalent interaction between rose anthocyanin extracts and whey protein isolate under different pH conditions

The non-covalent interaction between anthocyanin and dietary protein had an impact on their physicochemical property. The purpose of this study was to study the non-covalent interaction mechanism between rose anthocyanin extract (RAEs) and whey protein isolate (WPI), and further compare the interaction mechanism with pure anthocyanin (PC) and WPI. At pH 3.0 and pH 7.0, RAEs and WPI had non-covalent interactions in the two systems with two types of unequal and mutually influencing binding sites, and the interaction forces were both hydrogen bonds and van der Waals forces. Interestingly, PC and WPI also had non-covalent interactions in both systems, the number of which binding sites was about one type, and the forces were hydrogen bonds and van der Waals forces. In addition, a variety of spectral combination techniques indicated that RAEs and PC caused similar changes in the secondary structure of WPI.

Novel Approaches for the Recovery of Natural Pigments with Potential Health Effects

The current increased industrial food production has led to a significant rise in the amount of food waste generated. These food wastes, especially fruit and vegetable byproducts, are good sources of natural pigments, such as anthocyanins, betalains, carotenoids, and chlorophylls, with both coloring and health-related properties. Therefore, recovery of natural pigments from food wastes is important for both economic and environmental reasons. Conventional methods that are used to extract natural pigments from food wastes are time-consuming, expensive, and unsustainable. In addition, natural pigments are sensitive to high temperatures and prolonged processing times that are applied during conventional treatments. In this sense, the present review provides an elucidation of the latest research on the extraction of pigments from the agri-food industry and how their consumption may improve human health.

Ultrasound-Assisted Extraction of Natural Pigments From Food Processing By-Products: A Review

Ultrasound is an emerging technology, which has been highly explored in the food area to improve processes and products. When ultrasound is applied to a product with solid or fluid characteristics, the passage of acoustic waves and acoustic cavitation generates different mechanisms responsible for modifications in the original matrix of the sample. These effects of ultrasound can also be used to take advantage of by-products, for example by extracting compounds of interest, including natural pigments. Natural pigments or colorants are being highly demanded by different industries not only for color purposes but also due to their healthy properties, the greater demands in regulations and new consumer preferences. This review presents an updated critical analysis of the application of ultrasound-assisted extraction (UAE) to obtain natural pigments from food processing by-products. Initially, the ultrasound effects and mechanisms that improve the extraction of natural pigments in a fluid medium, as well as the factors that influence the extraction and the energy consumption of UAE are analyzed and described. Subsequently, the UAE application to obtain pigments belonging to the groups of carotenoids, chlorophyll, anthocyanins and betalains is evaluated. These sections detail the processing conditions, positive and negative effects, as well as possible applications of the extracted pigments. This review presents relevant information that may be useful to expand and explore new applications of ultrasound technology as well as promote the revaluation of by-products to obtain pigments that can be used in food, pharmaceutical or cosmetic industries.

Enhancing health benefits of bakery products using phytochemicals

There has been a growing interest in functional bakery products with enhanced health benefits, especially the prevention of some chronic diseases such as type 2 diabetes, cardiovascular diseases and neurodegenerative disorders. Fortification of wheat flour with phytochemicals, plant components with various bio-activities, is one of the promising approaches to improving public health with the ubiquitous consumption of baked goods. This chapter reviews the current knowledge of several representative phytochemicals, mainly plant polyphenols, including catechins, anthocyanins, fucoidan and quercetin extracted from various plant resources, and their application in bakery products, regarding their stability, impact on product quality and potential health benefits.

Camu-camu [Myrciaria dubia (HBK) McVaugh]: A review of properties and proposals of products for integral valorization of raw material

This review aims to evaluate the production and processing chain of camu-camu (Myrciaria dubia), giving suggestions to maximize the valorization of raw materials, demonstrating new product possibilities from processing to distribution and highlighting the suggested contributions. It is clear that despite the camu-camu pulp has important properties, a large part of its raw material, considered waste (around 50%) and formed by important bioactive compounds, can give rise to new products, such as bioactive extracts to be used by pharmaceutical, chemical and food industries, ingredients for bakery products, dairy and several others sectors, which constitutes opportunities, in addition to contributing to the reduction of agro-industrial waste and the preservation of the environment.

Red pitaya (Hylocereus costaricensis) peel as a source of valuable molecules: Extraction optimization to recover natural colouring agents

Hylocereus costaricensis peel contains large amounts of betacyanins and can be exploited as a source of natural colorants. This work aimed the chemical characterization and evaluation of bioactive properties of this by-product and the optimization of the ultrasound-assisted extraction (UAE) of betacyanins using the response surface methodology (RSM). Oxalic and malic acids and traces of fumaric acid were detected, as well as the four tocopherol isoforms, predominantly γ-tocopherol. Four betacyanins were identified and used as response criteria for UAE optimization, namely phyllocactin, isobetanin, isophyllocactin, and betanin. Sample processing at 487 W for 38 min result in the maximum betacyanin content (36 ± 1 mg/g dw). The peel extract inhibit the oxidative haemolysis, with IC₅₀ values of 255 and 381 μg/mL for Δt of 60 and 120 min, respectively, and the growth of pathogenic bacteria, with minimum inhibitory concentrations ranging from 5 to 20 mg/mL. Furthermore, no toxicity was observed for normal cells.

Up-To-Date Analysis of the Extraction Methods for Anthocyanins: Principles of the Techniques, Optimization, Technical Progress, and Industrial Application

Nowadays, food industries are concerned about satisfying legal requirements related to waste policy and environmental protection. In addition, they take steps to ensure food safety and quality products that have high nutritional properties. Anthocyanins are considered high added-value compounds due to their sensory qualities, colors, and nutritional properties; they are considered bioactive ingredients. They are found in high concentrations in many by-products across the food industry. Thus, the non-conventional extraction techniques presented here are useful in satisfying the current food industry requirements. However, selecting more convenient extraction techniques is not easy. Multiple factors are implicated in the decision. In this review, we compile the most recent applications (since 2015) used to extract anthocyanins from different natural matrices, via conventional and non-conventional extraction techniques. We analyze the main advantages and disadvantages of anthocyanin extraction techniques from different natural matrices and discuss the selection criteria for sustainability of the processes. We present an up-to-date analysis of the principles of the techniques and an optimization of the extraction conditions, technical progress, and industrial applications. Finally, we provide a critical comparison between these techniques and some recommendations, to select and optimize the techniques for industrial applications.

Water-in-Oil-in-Water Double Emulsions as Protective Carriers for Sambucus nigra L. Coloring Systems

The use of natural colorants is needed to overcome consumer concerns regarding synthetic food colorants' safety. However, natural pigments have, in general, poor stability against environmental stresses such as temperature, ionic strength, moisture, light, and pH, among others. In this work, water-in-oil-in-water (W1/O/W2) emulsions were used as protective carriers to improve color stability of a hydrophilic Sambucus nigra L. extract against pH changes. The chemical system comprised water and corn oil as the aqueous and oil phases, respectively, and polyglycerol polyricinoleate (PGPR), Tween 80, and gum Arabic as stabilizers. The primary emulsion was prepared using a W1/O ratio of 40/60 (v/v). For the secondary emulsion, W1/O/W2, different (W1/O)/W2 ratios were tested with the 50/50 (v/v) formulation presenting the best stability, being selected as the coloring system to test in food matrices of different pH: natural yogurt (pH 4.65), rice drink (pH 6.01), cow milk (pH 6.47), and soy drink (pH 7.92). Compared to the direct use of the extract, the double emulsion solution gave rise to higher color stability with pH change and storage time, as corroborated by visual and statistical analysis.

By-Products Revalorization with Non-Thermal Treatments to Enhance Phytochemical Compounds of Fruit and Vegetables Derived Products: A Review

The aim of this review is to provide comprehensive information about non-thermal technologies applied in fruit and vegetables (F&V) by-products to enhance their phytochemicals and to obtain pectin. Moreover, the potential use of such compounds for food supplementation will also be of particular interest as a relevant and sustainable strategy to increase functional properties. The thermal instability of bioactive compounds, which induces a reduction of the content, has led to research and development during recent decades of non-thermal innovative technologies to preserve such nutraceuticals. Therefore, ultrasounds, light stresses, enzyme assisted treatment, fermentation, electro-technologies and high pressure, among others, have been developed and improved. Scientific evidence of F&V by-products application in food, pharmacologic and cosmetic products, and packaging materials were also found. Among food applications, it could be mentioned as enriched minimally processed fruits, beverages and purees fortification, healthier and "clean label" bakery and confectionary products, intelligent food packaging, and edible coatings. Future investigations should be focused on the optimization of 'green' non-thermal and sustainable-technologies on the F&V by-products' key compounds for the full-utilization of raw material in the food industry.

Sustainable Recovery of Preservative and Bioactive Compounds from Food Industry Bioresidues

With the increasing demand for convenient and ready-to-eat foods, the use of antioxidants and preservative additives in foodstuff formulation is essential. In addition to their technological functions in food, bio-based additives confer beneficial properties for human health for having antioxidant capacity and acting as antimicrobial, antitumor, and anti-inflammatory agents, among others. The replacement of preservatives and other additives from synthetic origin, usually related to adverse effects on human health, faces some challenges such as availability and cost. An opportunity to obtain these compounds lies in the food industry itself, as a great variety of food waste has been identified as an excellent source of high value-added compounds. Large amounts of seeds, fibrous strands, peel, bagasse, among other parts of fruits and vegetables are lost or wasted during industrial processing, despite being rich sources of bioactive compounds. From a circular economy perspective, this work reviewed the main advances on the recovery of value-added compounds from food industry bioresidues for food application. Bioactive compounds, mainly phenolic compounds, have been largely obtained, mostly from seeds and peels, and have been successfully incorporated into foods. Additionally, alternative and eco-friendly extraction techniques, as ultrasound and microwave, have showed advantages in extracting antioxidant and preservatives compounds.

Jabuticaba (Myrciaria jaboticaba) Peel as a Sustainable Source of Anthocyanins and Ellagitannins Delivered by Phospholipid Vesicles for Alleviating Oxidative Stress in Human Keratinocytes

The Brazilian berry scientifically known as jabuticaba is a fruit covered by a dark purple peel that is still rich in bioactives, especially polyphenols. Considering that, this work was aimed at obtaining an extract from the peel of jabuticaba fruits, identifying its main components, loading it in phospholipid vesicles specifically tailored for skin delivery and evaluating their biological efficacy. The extract was obtained by pressurized hot water extraction (PHWE), which is considered an easy and low dissipative method, and it was rich in polyphenolic compounds, especially flavonoids (ortho-diphenols and condensed tannins), anthocyanins (cyanidin 3-O-glucoside and delphinidin 3-O-glucoside) and gallic acid, which were responsible for the high antioxidant activity detected using different colorimetric methods (DPPH, FRAP, CUPRAC and metal chelation). To improve the stability and extract effectiveness, it was incorporated into ultradeformable phospholipid vesicles (transfersomes) that were modified by adding two different polymers (hydroxyethyl cellulose and sodium hyaluronate), thus obtaining HEcellulose-transfersomes and hyaluronan-transfersomes. Transfersomes without polymers were the smallest, as the addition of the polymer led to the formation of larger vesicles that were more stable in storage. The incorporation of the extract in the vesicles promoted their beneficial activities as they were capable, to a greater extent than the solution used as reference, of counteracting the toxic effect of hydrogen peroxide and even of speeding up the healing of a wound performed in a cell monolayer, especially when vesicles were enriched with polymers. Given that, polymer enriched vesicles may represent a good strategy to produce cosmetical and cosmeceutical products with beneficial properties for skin.

Extraction of Aloesin from Aloe vera Rind Using Alternative Green Solvents: Process Optimization and Biological Activity Assessment

Simple Summary

Aloesin is a bioactive constituent of Aloe spp. used primarily in cosmetic products. Its recovery from plant materials is affected by several variables that can compromise the process yield and profitability, which is why it is necessary to determine the best processing conditions. This study describes the design and optimization of a method for extraction of aloesin from Aloe vera rind, a leaf part often discarded as a by-product, using the response surface methodology. The effect of the variables time, temperature, solvent composition, and solid/liquid ratio were investigated. Green organic solvents (ethanol, propylene glycol, and glycerol) were used in aqueous mixtures. Aqueous propylene glycol was found to be the most promising solvent for aloesin recovery and a linear increase in extraction yields was verified with the increase in solid/liquid ratio. To assess the bioactivity of the extracts, their ability to inhibit lipid peroxidation and the fungal and bacterial growth, as well as their cytotoxic potential, was tested in vitro. Overall, it was possible to determine the best extraction conditions for aloesin and to better understand the antioxidant and antimicrobial properties of the aloesin-rich extracts, which may be produced and used by the industrial sector.

Abstract

Aloesin is an aromatic chromone with increasing applications in the cosmetic and health food industries. To optimize its extraction from the Aloe vera leaf rind, the independent variables time (10–210 min), temperature (25–95 °C) and organic solvent composition (0–100%, w/w) were combined in a central composite design coupled with response surface methodology. The solvents consisted of binary mixtures of water with ethanol, propylene glycol, or glycerol. The aloesin levels quantified in each extract were used as response for optimization. The theoretical models were fitted to the experimental data, statistically validated, and used to obtain the optimal extraction conditions. Then, a dose–response analysis of the solid/liquid ratio (S/L) was performed under the optimal conditions determined for each alcohol–water system and revealed that a linear improvement in extraction efficiency can be achieved by increasing the S/L ratio by up to 40 g/L. This analysis also allowed to experimentally validate the predictive models. Furthermore, the aloesin-rich extracts revealed antioxidant activity through thiobarbituric acid reactive substances (TBARS) formation inhibition, antimicrobial effects against bacterial and fungal strains, and no toxicity for PLP2 cells. Overall, this study provided optimal extraction conditions for the recovery of aloesin from Aloe vera rind through an eco-friendly extraction process and highlighted its bioactive potential.

Development of natural pigments microencapsulated in waste yeast Saccharomyces cerevisiae using spray drying technology and their application in yogurt

Although Saccharomyces cerevisiae has shown potential utilization as a bio-vehicle for encapsulation, there are no reports about the functionality of natural colorants encapsulated using yeast cells. The main objectives of this study were to produce natural food coloring by encapsulating extracts from grape pomace (GP) and jabuticaba byproducts (JB) in brewery waste yeast and evaluate the functionality of the pigments by their incorporation into yogurts. Particles produced by the encapsulation of extracts from GP and JB in S. cerevisiae using 5% of yeast had the highest encapsulation efficiencies for both anthocyanins (11.1 and 47.3%) and phenolic compounds (67.5 and 63.6%), the highest concentration of both bioactives during storage and stable luminosity. Yogurts showed a pseudoplastic behavior and were considered weak gels. Colored yogurts had acceptance indexes between 73.9 and 81.4%. This work evidenced the utilization of enriched yeasts as coloring agents and interesting additives for the production of functional foods.