Impedimetric aptasensor based on highly porous gold for sensitive detection of acetamiprid in fruits and vegetables

Amplified electrochemiluminescence of Ru(dcbpy)32+ via coreactant active sites on nitrogen-doped graphene quantum dots

Searching for new alternative to tripropylamine (TPrA) with low toxicity and high chemical stability for the tris(4,4'-dicarboxylic acid-2,2'-bipyridyl)ruthenium (II) (Ru(dcbpy)32+) based coreactant electrochemiluminescence (ECL) system is essential for widespread analytical applications. Here, nitrogen-doped graphene quantum dots (NGQDs) have been discovered to significantly amplify the ECL emission and increase the ECL efficiency of Ru(dcbpy)32+ for the first time. However, the mechanism by which NGQDs act as coreactants is not well comprehended. Therefore, various optical and electrochemical technologies were employed to investigate the ECL mechanism. It is proposed that the amino and carboxyl groups on the surface of NGQDs play crucial roles as the coreactant active sites, catalyzing the oxidation of Ru(dcbpy)32+. Based on this foundation, an "on-off-on" ECL aptasensor for the quantification of acetamiprid was developed, exhibiting a broad linear range and a detection limit of 0.056 pM. Satisfactory recoveries, ranging from 98.0 % to 101.6 %, were achieved in pakchoi samples. Consequently, NGQDs could serve as coreactants for Ru(dcbpy)32+, offering new opportunities for constructing a variety of sensors with extensive analytical applications in the ECL field.

Recent Advances in Food Safety: Nanostructure-Sensitized Surface-Enhanced Raman Sensing

Food safety is directly related to human health and has attracted intense attention all over the world. Surface-enhanced Raman scattering (SERS), as a rapid and selective technique, has been widely applied in monitoring food safety. SERS substrates, as an essential factor for sensing design, greatly influence the analytical performance. Currently, nanostructure-based SERS substrates have garnered significant interest due to their excellent merits in improving the sensitivity, specificity, and stability, holding great potential for the rapid and accurate sensing of food contaminants in complex matrices. This review summarizes the fundamentals of Raman spectroscopy and the used nanostructures for designing the SERS platform, including precious metal nanoparticles, metal-organic frameworks, polymers, and semiconductors. Moreover, it introduces the mechanisms and applications of nanostructures for enhancing SERS signals for monitoring hazardous substances, such as foodborne bacteria, pesticide and veterinary drug residues, food additives, illegal adulterants, and packaging material contamination. Finally, with the continuous progress of nanostructure technology and the continuous improvement of SERS technology, its application prospect in food safety testing will be broader.

Current Advances in Aptasensors for Pesticide Detection

The increasing use of pesticides necessitates the development of innovative analytical methods to regulate environmental impacts and ensure food safety. Aptamer-based sensors hold great promise for pesticide detection owing to their superior selectivity, stability, repeatability, and regenerative capabilities. Integrated with nanomaterials, aptasensors have demonstrated enhanced sensitivity for detecting a broad range of pesticides. This study first introduces the aptamer binding mechanism and presents the fundamental concept and justification for selecting aptamer over other biorecognition molecules. It then provides a comprehensive review of recent advancements and applications of various types of aptasensors for targeted pesticide detection, including electrochemical, fluorescent, colorimetric, electrochemiluminescent, and surface-enhanced Raman scattering (SERS) aptasensors. Additionally, it offers a comparative analysis of different aptasensors by evaluating their strengths and limitations. Finally, this review discusses strategies, such as advanced Systemic Evolution of Ligands by Exponential Enrichment (SELEX) technique, self-assembled monolayers (SAMs), and the use of antifouling agents to improve the aptamer's selectivity, signal-to-noise ratio, and mitigate nonspecific adsorption challenges. These developments are essential for creating highly sensitive and selective aptasensors, facilitating their practical use in environmental monitoring and food safety.

Research Progress on the Application of Metal Porphyrin Electrochemical Sensors in the Detection of Phenolic Antioxidants in Food

This paper reviews the application of metal porphyrin electrochemical sensors in the detection of phenolic antioxidants in food, focusing on the latest progress and innovative applications in this field. Phenolic antioxidants are widely used in food and can effectively prolong the shelf life of food, but their excessive use may cause potential harm to human health, so the detection of their content is very important. In recent years, electrochemical analysis technology has gradually become an emerging method for quantitative detection of phenolic antioxidants due to its advantages of sensitivity, simplicity and high selectivity. As a new type of sensor, metal porphyrin electrochemical sensors have been widely used in the detection of phenolic antioxidants in food due to their excellent electrochemical performance and high selectivity. By modifying metal nanomaterials, the detection performance of these sensors has been significantly improved. This paper first introduces the basic concepts and physicochemical properties of phenolic antioxidants, analyzes their potential hazards and discusses relevant regulations and limit requirements. Then, the existing analysis methods of phenolic antioxidants are compared, and the development trend of traditional detection methods and new detection technologies is reviewed. Subsequently, the application progress of electrochemical sensors in the detection of phenolic antioxidants is discussed in depth, its working principle is expounded and the research results are summarized. Finally, the innovative applications of metalloporphyrins and their nanocomposites in electrochemical sensors are introduced in detail. The unique advantages of metalloporphyrins in the detection of phenolic antioxidants in food are highlighted, and the future development direction is laid out.

Highly sensitive chemiluminometric and colorimetric probes for acetamiprid assay based on Cu2SnS3 quantum dots with peroxide-mimicking activity

Cu2SnS3 quantum dots (QDs) were employed to create colorimetric and chemiluminometric probes for the detection of acetamiprid. We demonstrated that the chemiluminescence (CL) signal of the luminol-hydrogen peroxide system, as well as the absorbance of the oxidation product of TMB with H2O2, was enhanced by the catalytic effect of Cu2SnS3 QDs. Additionally, the enhanced signals from both probes (CL intensity and absorbance) were diminished upon the addition of acetamiprid to the reaction mixture owing to the decrease in the generation of reactive oxygen species (ROS) via the interaction of hydroxyl radicals with cyanide groups of acetamiprid during the reactions. Based on these findings, we developed a colorimetric sensor for acetamiprid with both spectrophotometer-based and smartphone-based detections (with detection limits of 3.6 nM and 14.2 nM, respectively), alongside a CL sensor with a detection limit of 2.7 nM. The sensors were employed for analyzing food and water samples, yielding satisfactory results. These probes combine the advantages of both techniques, including a low limit of detection and rapid response time of CL, as well as the simplicity, cost-effectiveness, and portable nature of smartphone-based colorimetry that also allows for in-field visual detection.

Energy-Transfer-Based Dual-Mode PEC-ECL Biosensor for Acetamiprid Analysis Sensitized by Two-Step DNA Circuit Amplification

Sensitive and accurate determination of acetamiprid is highly desirable for guaranteeing food safety. In this Letter, an energy-transfer-based dual-mode biosensor was developed using zinc-based metal-organic frameworks (Zn-MOFs) acting as both photoelectrochemical (PEC) and electrochemiluminescent (ECL) donors and Pt@Cu2O cubic nanocrystals (CNs) as the energy acceptor for detecting acetamiprid. By integration of aptamer recognition with two-step DNA circuit amplification (entropy-driven DNA cycle and DNA walker), the detection of acetamiprid was converted into the assay of abundant intermediate DNA strands. With the help of nicking endonuclease, a large number of single-stranded DNAs was generated on the surface of Zn-MOFs, which were used as multifunctional PEC and ECL substrates. Through competitive hybridization, Pt@Cu2O CNs as broad-spectrum quenchers were introduced, thereby enabling changes in the PEC and ECL responses for acetamiprid quantitation. The experimental results proved that the combination of energy transfer, two-step DNA circuit amplification, and dual-mode sensing strategy achieved the sensitive and accurate analysis of acetamiprid, with low detection limits of 20.2 fM (PEC mode) and 17.5 fM (ECL mode) within a wide range from 0 to 1 × 10-9 M. The excellent specificity, reproducibility, and practicality confirmed the potential application of the biosensor for pesticide-related food safety.

Novel cross-linkable fluorescent probe with oriented antibody to enhance lateral immunoassay strip for the detection of acetamiprid

Time-resolved fluorescent lateral immunoassay strip (TRFLIS) is a reliable and rapid method for detecting acetamiprid. However, its sensitivity is often affected by the structural patterns and stability of the fluorescent probe. Researchers have shown significant interests in using goat anti-mouse IgG (GaMIgG) which is indirectly bound to time-resolved fluorescent microsphere (TRFM) and antibody. This allowed for oriented modification of the antibody. However, the stability of fluorescent probe in this binding mode remained unexplored. Herein, 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride was innovatively used as a cross-linking agent to enhance the binding of antibody to GaMIgG, which improved the stability of the fluorescent probe. Under optimal working conditions, this strategy exhibited a wide linear response range of 5-700 ng/mL. Its limit of detection (LOD) was 0.62 ng/mL, the visual LOD was 5 ng/mL, and the limit of quantification (LOQ) of 2.06 ng/mL. Additionally, under tomato matrix, leek matrix and Chinese cabbage matrix, the linear response ranges were 5-400, 5-300, and 5-700 ng/mL, with LODs of 0.16, 0.60, and 0.41 ng/mL, with LOQs of 0.53, 2.01 and 1.37 ng/mL, respectively. In conclusion, this strategy effectively reduced the dosage of acetamiprid antibody compared with TRFM directly linking acetamiprid antibody, and greatly increased the sensitivity of TRFLIS. Meanwhile, it demonstrated outstanding specificity and accuracy in acetamiprid detection and had been successfully applied to vegetable samples. This method enables rapid and accurate detection of large-volume samples by combining qualitative and quantitative methods. As such, it has great potential in the development of low-cost and high-performance immunochromatographic platforms.

Programmable DNA Templates for Silver Nanoclusters Synthesis To Develop On-Demand FRET Aptasensor

DNA-templated silver nanoclusters (AgNCs-DNA) can be synthesized via a one-pot method bypassing the tedious process of biomolecular labeling. Appending an aptamer to DNA templates results in dual-functionalized DNA strands that can be utilized for synthesizing aptamer-modified AgNCs, thereby enabling the development of label-free fluorescence aptasensors. However, a major challenge lies in the necessity to redesign the dual-functionalized DNA strand for each specific target, thus increasing the complexity and hindering widespread application of these aptasensors. To overcome this challenge, we designed six DNA strands (DNA1-DNA6) that incorporate the templates for AgNCs synthesis and A4-linker for further aptamer coupling. Among all the synthesized AgNCs-DNA samples, it was found that both AgNCs-DNA1 and AgNCs-DNA2 stood out for their excellent long-term stability. After capturing the T4-linker that connected with aptamer1 specific for aflatoxin B1 (AFB1), however, we found that only AgNCs-DNA1/aptamer1 maintained excellent long-term stability. This finding highlighted the potential of AgNCs-DNA1 as a versatile label-free fluorescence probe for the development of on-demand fluorescence aptasensors. To emphasize its benefits in aptasensing applications, we utilized AgNCs-DNA1/aptamer1 as the fluorescence probe and MoS2 nanosheets as the quencher to develop a FRET aptasensor for AFB1 detection. This aptasensor demonstrated remarkable sensitivity, enabling the detection of AFB1 within a wide concentration range of 0.03-120 ng/mL, with a limit of detection as low as 3.6 pg/mL (S/N = 3). The versatility of the aptasensor has been validated through the recognition of diverse targets, employing aptamer2 specific for ochratoxin A and aptamer3 specific for zearalenone, thereby showcasing its extensive applicability for on-demand detection. The universal applicability of this aptasensor holds great promise for future applications in diverse fields including food safety, environmental monitoring, and clinical diagnosis.

Electrochemical sensing mechanisms of neonicotinoid pesticides and recent progress in utilizing functional materials for electrochemical detection platforms

The excessive residue of neonicotinoid pesticides in the environment and food poses a severe threat to human health, necessitating the urgent development of a sensitive and efficient method for detecting trace amounts of these pesticides. Electrochemical sensors, characterized by their simplicity of operation, rapid response, low cost, strong selectivity, and high feasibility, have garnered significant attention for their immense potential in swiftly detecting trace target molecules. The detection capability of electrochemical sensors primarily relies on the catalytic activity of electrode materials towards the target analyte, efficient loading of biomolecular functionalities, and the effective conversion of interactions between the target analyte and its receptor into electrical signals. Electrode materials with superior performance play a crucial role in enhancing the detection capability of electrochemical sensors. With the continuous advancement of nanotechnology, particularly the widespread application of novel functional materials, there is paramount significance in broadening the applicability and expanding the detection range of pesticide sensors. This comprehensive review encapsulates the electrochemical detection mechanisms of neonicotinoid pesticides, providing detailed insights into the outstanding roles, advantages, and limitations of functional materials such as carbon-based materials, metal-organic framework materials, supramolecular materials, metal-based nanomaterials, as well as molecular imprinted materials, antibodies/antigens, and aptamers as molecular recognition elements in the construction of electrochemical sensors for neonicotinoid pesticides. Furthermore, prospects and challenges facing various electrochemical sensors based on functional materials for neonicotinoid pesticides are discussed, providing valuable insights for the future development and application of biosensors for simplified on-site detection of agricultural residues.

A DNA tetrahedral scaffolds-based electrochemical biosensor for simultaneous detection of AFB1 and OTA

Herein, a bifunctional electrochemical biosensor based on the DNA tetrahedral scaffolds (TDNs) was proposed, OTA@TDNs and AFB1@TDNs were adopted for electrochemical signal output in response to OTA and AFB1 concentration, simultaneously. In order to increase the conductivity of the biosensor, highly porous gold (HPG) was loaded on electrode surface by pulse electrodeposition. Under optimal conditions, the PFc displayed a linear range with AFB1 concentration between 0.05 ∼ 360 ng·mL-1 with the LOD of 3.5 pg·mL-1. And the PMB selective and sensitive responses to OTA are achieved with a linear range of 0.05 ∼ 420 ng·mL-1 and a LOD of 2.4 pg·mL-1. This biosensor has high sensitivity, selectivity and stability for OTA and AFB1 detection in peanut samples. The approach streamlines the experimental procedure, leading to significantly improve the detection efficiency of mycotoxins. Collectively, this method suggest a novel approach for the detection and monitoring of OTA and AFB1 in food sample.

A highly effective SERS platform formed by the fabrication of Ag@ZIF-8@Au nanoparticles for rapid detection of acetamiprid in environment

The unreasonable spraying and random migration of acetamiprid may cause pollution of crops, soil and water resources in the environment, resulting in threatening ecosystem and human health. However, the monitoring of acetamiprid using mass spectrum in the environment encounters challenges due to high-cost instruments and complex processing time. Herein, we fabricated a rapid and reliable SERS method based on Ag@ZIF-8@Au platforms for tracing acetamiprid residues in the environment. In this method, a MOF material named ZIF-8 is coated with silver nanoparticles and distributed internally between AgNPs and AuNPs to enhance Raman signal, which can enrich pesticide molecules into the hotspots area provided by noble material and helps avoid the oxidation of silver nanoparticles. High sensitivity (LOD of 9.027 × 10-10 M for acetamiprid, and SERS enhancement factor of 4.3 × 107), excellent reproducibility (6.496% or 7.198% RSD for 30 random points) and superior stability (3.127% RSD for 6 weeks) were achieved using the proposed method. Acetamiprid with concentrations from 10-4 to 10-9 M were successfully detected by SERS method. Furthermore, the linear detection models of acetamiprid in different environment matrices (lake water, tea leaves, tea garden soil, oranges and oranges orchard soil) were established and all the correlation coefficient (R2) were higher than or equal to 95%, indicating the excellent adaptability of Ag@ZIF-8@Au platform in environment. The randomly spiked concentrations of acetamiprid were also tested with good recovery values and low relative error values, further confirming the reliability of the detection method.

Fluorescent aptasensor mediated with multiple ssDNA for sensitive detection of acetamiprid in vegetables based on magnetic Fe3O4/C-assisted separation

Acetamiprid (ACE) is a highly effective broad-spectrum insecticide, and its widespread use is potentially harmful to human health and environmental safety. In this study, magnetic Fe3O4/carbon (Fe3O4/C), a derivative of metal-organic framework MIL-101 (Fe), was synthesized by a two-step calcination method. And a fluorescent sensing strategy was developed for the efficient and sensitive detection of ACE using Fe3O4/C and multiple complementary single-stranded DNA (ssDNA). By using aptamer with multiple complementary ssDNA, the immunity of interference of the aptasensor was improved, and the aptasensor showed high selectivity and sensitivity. When ACE was present, the aptamer (Apt) combined with ACE. The complementary strand of Apt (Cs1) combined with two short complementary strands of Cs1, fluorophore 6-carboxyfluorescein-labeled complementary strand (Cs2-FAM) and the other strand Cs3. The three strands formed a double-stranded structure, and fluorescence would not be quenched by Fe3O4/C. In the absence of ACE, Cs2-FAM would be in a single-chain state and would be adsorbed by Fe3O4/C, and the fluorescence of FAM would be quenched by Fe3O4/C via photoelectron transfer. This aptasensor sensitively detected ACE over a linear concentration range of 10-1000 nM with a limit of detection of 3.41 nM. The recoveries of ACE spiked in cabbage and celery samples ranged from 89.49% to 110.76% with high accuracy.

Electrochemical sensors of neonicotinoid insecticides residues in food samples: From structure to analysis

Most food samples are detected positive for neonicotinoid insecticides, posing a severe threat to human health. Electrochemical sensors have been proven effective for monitoring the residues to guarantee food safety, but there needs to be more review to conclude the development status comprehensively. On the other hand, various modified materials were emphasized to improve the performance of electrochemical sensors in relevant reviews, rather than the reasons why they were selected. Therefore, this paper reviewed the electrochemical sensors of neonicotinoid insecticides according to bases and strategies. The fundamental basis is the molecular structure of neonicotinoid insecticides, which was disassembled into four functional groups: nitro group, saturated nitrogen ring system, aromatic heterocycle and chlorine substituent. Their relationships were established with strategies including direct sensing, enzyme sensors, aptasensors, immunosensors, and sample pretreatment, respectively. It is hoped to provide a reference for the effective design of electrochemical sensors for small molecule compounds.

A novel electrochemical aptasensor based on core-shell nanomaterial labeling for simultaneous detection of acetamiprid and malathion

At present, due to the coexistence of multiple pesticides in vegetables and the enhanced toxicity, a simultaneous detection method for multiple pesticides is urgently needed. In this work, two types of core-shell nanomaterials, Ag-Au core-shell nanoparticles (Ag@Au NPs) and Cu2O-Au core-shell nanoparticles (Cu2O@Au NPs), were synthesized and labeled with acetamiprid aptamer and malathion aptamer to prepare two novel electroactive signal probes, respectively. The two probes were hybridized on the surface of the electrode by the principle of base complementary pairing between the aptamers and the thiolated DNA oligonucleotide sequences, and a dual-signal electrochemical aptasensor for the simultaneous detection of acetamiprid and malathion was established by modified glassy carbon electrode (GCE). The limits of detection (LOD) were calculated to be 43.7 pg mL-1 for acetamiprid and 63.4 pg mL-1 for malathion. The aptasensor determined acetamiprid and malathion in spinach and rape with the recovery rates of 88.9%-112.5% and 98.0%-114.1%, respectively.

In-silico selection of peptides for the recognition of imidacloprid

The sensitive detection of pesticides using low-cost receptors designed from peptides can widen their uses in the environmental surveillance for emerging pollutants. In-silico selection of peptides can help accelerate the design of receptor sequence banks for a given target of interest. In this work, we started from Lymnaea stagnalis acetylcholine-binding protein Q55R mutant receptor-imidacloprid complex, available in the PDB databank, to select three primary short peptides (YSP09, DMR12, WQW13 respectively having 9, 12 and 13 amino acids (AA) in length) from the pesticide interacting zones with the A, B and C chains of the nicotinic receptor. Using molecular docking and molecular dynamics (MD) simulations, we showed that the three peptides can form complexes with the target imidacloprid, having energies close to that obtained from a reference RNR12 peptide. Combination of these peptides allowed preparing a new set of longer peptides (YSM21, PSM22, PSW31 and WQA34) that have higher stability and affinity as shown by the MM-PBSA calculations. In particular, the WQA34 peptide displayed an average binding free energy of -6.44±0.27 kcal/mol, which is three times higher than that of the reference RNR12 peptide (-2.29±0.25 kcal/mol) and formed a stable complex with imidacloprid. Furthermore, the dissociation constants (Kd), calculated from the binding free energy, showed that WQA32 (40 μM) has three orders of magnitude lower Kd than the reference RNR12 peptide (3.4 × 104 μM). Docking and RMSD scores showed that the WQA34 peptide is potentially selective to the target imidacloprid with respect to acetamiprid and clothianidin. Therefore, this peptide can be used in wet-lab experiments to prepare a biosensor to selectively detect imidacloprid.

A dual-modal biosensor coupling cooperative catalysis strategy for sensitive detection of AFB1 in agri-products

Herein, the cooperative catalysis effect between nanocomposite (AgPd NPs/POD-M/PEI-rGO) and horseradish peroxidase (HRP) was applied for the fast and sensitive detection of aflatoxin B1 (AFB₁). Upon specific and competitive binding of HRP@DNA and AFB₁ to cDNA, the working electrode presented different catalytic capacities for supporting electrolytes (TMB and H₂O₂). In the redox mechanism of TMB and H₂O₂, HRP and nanocomposite effectively catalyzed the oxidization of TMB to form the one-electron oxidation intermediate TMB+, and contributed the electrical signals and absorbance signals. Electrochemistry and colorimetric analyses were successfully realized for AFB₁ detection with 0.2 pg/mL and 8 pg/mL of detection limits, respectively, which is much lower than that of traditional HPLC methods. Overall, this method had significant reliability and sensitivity, offering a promising potential for conveniently evaluating the quality of agri-products polluted with AFB₁. Moreover, this approach provides a new idea for fast and accurate detection of mycotoxin.

Synergistic Signal Amplification-Initiated Innovative Self-Powered Photoelectrochemical Aptasensing: An Ingenious Photocathode Activated by the High-Light-Harvesting Photoanode

Exploiting ingenious photoelectrodes and innovative signal amplification strategies has the potential to achieve high sensitivity in self-powered cathodic photoelectrochemical (PEC) analysis. In this work, a novel self-powered PEC sensing platform was constructed by integrating a synergistic signal amplification of an ingenious photocathode with a high light-harvesting photoanode. In the dual photoelectrode-based PEC system, the amplified photocurrent signals were induced by a synergistic enhancement: (1) the photocurrent of the BiOBr photocathode was improved by the incorporation of nitrogen-doped graphene; (2) the photocurrent of the self-powered sensor was activated by the high-light-harvesting Bi₂S₃-C₃N₄ photoanode. Subsequently, the rational mechanism for synergistic signal amplification was investigated. For the construction of the sensing interface, an aptamer was introduced as the recognition element to specifically capture the streptomycin (STR) target. Under optimal conditions, the constructed self-powered aptasensor has the merits of good linear range (1 × 10^-11 to 5 × 10^-7 M), acceptable limit of detection (1.18 × 10^-12 M), and excellent stability and selectivity for STR detection. Additionally, the proposed self-powered aptasensor showed acceptable accuracy for the detection of STR in water. Hopefully, this might stimulate more interest in designing and constructing novel platforms for exquisite photocathodic monitoring of various contaminants in the environment.

In silico selection of an aptamer for the design of aptamer-modified magnetic beads bearing ferrocene co-immobilized label for capacitive detection of acetamiprid

In silico evaluation of aptamer/target interactions can facilitate the development of efficient biosensor with high specificity and affinity. In this work, we present in silico, i.e. structural similarity, molecular docking and molecular dynamics selection of the aptamer with sufficient binding properties for acetamiprid (ACE), a nicotine-like pesticide, and its use to design aptamer-modified magnetic beads bearing ferrocene co-immobilized label for capacitive detection of ACE. Taking advantages of the aptamer higher stability and binding affinity, the specific properties of magnetic beads and the redox properties of ferrocene moiety, the developed aptasensor showed promising analytical performances for ACE detection, using electrochemical capacitance spectroscopy, with a linear response ranging from 1 fM to 100 pM and a limit of detection of 0.94 fM (S/N = 3). Furthermore, it was successfully applied to detect ACE in fortified tomatoes samples, proving a promising approach for routine detection of pesticide in real agricultural samples.

Bio-Tailored Sensing at the Nanoscale: Biochemical Aspects and Applications

The demonstration of the first enzyme-based electrode to detect glucose, published in 1967 by S. J. Updike and G. P. Hicks, kicked off huge efforts in building sensors where biomolecules are exploited as native or modified to achieve new or improved sensing performances. In this growing area, bionanotechnology has become prominent in demonstrating how nanomaterials can be tailored into responsive nanostructures using biomolecules and integrated into sensors to detect different analytes, e.g., biomarkers, antibiotics, toxins and organic compounds as well as whole cells and microorganisms with very high sensitivity. Accounting for the natural affinity between biomolecules and almost every type of nanomaterials and taking advantage of well-known crosslinking strategies to stabilize the resulting hybrid nanostructures, biosensors with broad applications and with unprecedented low detection limits have been realized. This review depicts a comprehensive collection of the most recent biochemical and biophysical strategies for building hybrid devices based on bioconjugated nanomaterials and their applications in label-free detection for diagnostics, food and environmental analysis.

A simple mesoporous silica Nanoparticle-based aptamers SERS sensor for the detection of acetamiprid

In this study, we developed a novel, rapid, simple, and sensitive nano sensor based on the controlled release of 4-Aminothiophenol (4-ATP) signal molecules from aptamers (Apts) modified aminated mesoporous silica nanoparticles (MSNs-NH₂) for the quantitative detection of acetamiprid (ACE). Firstly, we synthesized the positively charged MSNs-NH₂ by one-pot method, then loaded 4-ATP signal molecules into the pore, and finally electrostatically adsorbed the Apts onto the MSNs-NH₂, which acts as a gate to control the release of signal molecules. When ACE is added to the system, ACE preferentially and specifically binds to Apts, so the gate opens and 4-ATP signal molecules are released from the pore. Meanwhile, the silver-loaded mesoporous silica nanoparticles (Ag@SiO₂) were prepared by one-pot method as surface-enhanced Raman spectroscopy (SERS) substrate to amplify the signal. The intensity of 4-ATP signal molecules at 1433 cm^-1 position was observed to has a linear relationship with the concentration of ACE by SERS detection. Under the optimized detection conditions, a linear correlation was observed in the range of 5-60 ng/mL (R² = 0.99749), and the limit of detection (LOD) was 2.66 ng/mL. The method has high sensitivity, good selectivity and reproducibility, and can be used for actual sample analysis with the recovery rate of 96.24-103.6 %. This study provides a reference for the rapid and convenient detection of ACE in agricultural products.

Fluorescent aptamer-modified mesoporous silica nanoparticles for quantitative acetamiprid detection

Acetamiprid (ACE) is widely used to control aphids, brown planthoppers, and other pests in agricultural production. However, ACE is difficult to degrade in the environment, resulting in excessive residue, which causes acute and chronic toxicity to human beings and non-target organisms. Therefore, the development of a rapid, convenient, and highly sensitive method to quantify ACE is essential. In this study, aminated mesoporous silica nanoparticles (MSNs-NH₂) were synthesized by one-pot method, and 6-carboxyl fluorescein modified aptamers (FAM-Apt) of ACE were adsorbed on the surface of MSNs-NH₂ by electrostatic interaction. Finally, a simple and sensitive fluorescence analysis method for the rapid detection of ACE was established. In the absence of ACE, the negatively charged FAM-Apt was electrostatically bound to the positively charged MSNs-NH₂, followed by centrifugation to precipitate MSNs-NH₂@FAM-Apt, and no fluorescent signal was detected in the supernatant. In the presence of ACE, the specific combination of FAM-Apt with ACE was greater than its electrostatic interaction with MSNs-NH₂, so that FAM-Apt was separated from MSNs-NH₂, and the supernatant had strong fluorescence signal after centrifugation. For ACE detection, the linear concentration range was 50-1100 ng/mL, and the detection limit (LOD) was 30.26 ng/mL. The method exhibited high sensitivity, selectivity and reproducibility, which is suitable for practical sample analysis and provides guidance for rapid detection of pesticide residues.

Nucleic Acid Aptamers for Pesticides, Toxins, and Biomarkers in Agriculture

Nucleic acid aptamers are short single-stranded DNA/RNA (ssDNA/RNA) oligonucleotides that can selectively bind to the targets. They are widely used in medicine, biosensing, and diagnostic assay. They have also been identified and extensively used for various targets in agriculture. In this review we summarize the progress of nucleic acid aptamers on pesticides (herbicides, insecticides, and fungicides), toxins, specific biomarkers of crops, and plant growth regulators in agricultural field in recent years. The basic process of aptamer selection, the already identified DNA/RNA aptamers and the aptasensors are discussed. We also discuss the future perspectives and the challenges for aptamer development in agriculture.

Electrochemiluminescence covalent organic framework coupling with CRISPR/Cas12a-mediated biosensor for pesticide residue detection

The trace detection of pesticide residue becomes particularly important since increasing attentions have been attached to food safety. Herein, we developed an electrochemiluminescence (ECL) covalent organic framework (COF) based-biosensor for trace pesticide detection coupling with CRISPR/Cas12a-mediated signal accumulation strategy. Firstly, the target conversion was carried out with an aptamer-assembled magnetic spherical nucleic acids, which can convert acetamiprid to activator DNA, triggering the CRISPR/Cas12a to make quenching probes far away from electrode for signal accumulation. The COF with stable and strong ECL was synthesized by a condensation reaction between the perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and melamine (MA), due to the highly ordered arrangement of the PTCDA luminescence units among COF structure and the pore confinement effect. Moreover, the designed assay method was successfully employed to detect the residual level of acetamiprid in real sample and expected to be widely used in pesticide-related food safety.

Thermal-controlled active sensor module using enzyme-regulated UiO-66-NH2/MnO2 fluorescence probe for total organophosphorus pesticide determination

An enzyme-regulated UiO-66-NH₂/MnO₂ fluorescence sensor, fully functionalized with spectrometric capacities, is developed for budget-friendly total organophosphorus pesticides (OPs) determination. The fluorescence probe, UiO-66-NH₂/MnO₂, is hydrothermally synthesized and morphologically examined. A specialized enzyme-catalyzed reaction, which can be gradually inhibited by OPs, is designed with participations of alkaline phosphatase (ALP) and sodium L-ascorbyl-2-phosphate (AAP). The reaction product of ascorbic acid (AA) decomposes MnO₂ and restores UiO-66-NH₂ fluorescence, establishing a relationship between OPs level and fluorescence intensity. Interactions among UiO-66-NH₂, MnO₂, OPs, and AA are clarified. Stepwise optimizations are performed to the UiO-66-NH₂/MnO₂ probe, ensuring considerable advantages as OPs affinity and fluorescence quenching behavior over rival nanomaterials. Analytical advances are magnified by fabricating an active sensor module, with self-acting thermal regulation for optimal enzyme activity. Under 4 and 20 °C environment, regulation period is less than 40 and 100 s. In total OPs determination for laboratorial and real-vegetable samples, this method exhibits uniform and log-linear responses to common species of OPs in a range as 1.0 × 10^-7~10 mg L^-1, and limit of detection is established as 8.9 × 10^-8 mg L^-1. Proposed readouts are validated with certified HPLC and recovery test. Relative errors and recovery rates are found as 2.7-6.4% and 95.8-102.6%, respectively.

Recent Advancements in Electrochemical Biosensors for Monitoring the Water Quality

The release of chemicals and microorganisms from various sources, such as industry, agriculture, animal farming, wastewater treatment plants, and flooding, into water systems have caused water pollution in several parts of our world, endangering aquatic ecosystems and individual health. World Health Organization (WHO) has introduced strict standards for the maximum concentration limits for nutrients and chemicals in drinking water, surface water, and groundwater. It is crucial to have rapid, sensitive, and reliable analytical detection systems to monitor the pollution level regularly and meet the standard limit. Electrochemical biosensors are advantageous analytical devices or tools that convert a bio-signal by biorecognition elements into a significant electrical response. Thanks to the micro/nano fabrication techniques, electrochemical biosensors for sensitive, continuous, and real-time detection have attracted increasing attention among researchers and users worldwide. These devices take advantage of easy operation, portability, and rapid response. They can also be miniaturized, have a long-life span and a quick response time, and possess high sensitivity and selectivity and can be considered as portable biosensing assays. They are of special importance due to their great advantages such as affordability, simplicity, portability, and ability to detect at on-site. This review paper is concerned with the basic concepts of electrochemical biosensors and their applications in various water quality monitoring, such as inorganic chemicals, nutrients, microorganisms' pollution, and organic pollutants, especially for developing real-time/online detection systems. The basic concepts of electrochemical biosensors, different surface modification techniques, bio-recognition elements (BRE), detection methods, and specific real-time water quality monitoring applications are reviewed thoroughly in this article.

Simple Design Concept for Dual-Channel Detection of Ochratoxin A Based on Bifunctional Metal-Organic Framework

A simple fluorescence and electrochemical dual-channel biosensor based on bifunctional Zr(IV)-based metal-organic framework (Zr-MOF) was proposed to detect Ochratoxin A (OTA). The bifunctional Zr-MOF, with photoluminescence properties and enormous electroactive ligands, was exploited to load OTA-specific aptamers for designing signal probes, greatly simplifying the probe-fabrication process and improving sensing reliability. Upon specific recognition of aptamer toward OTA, the anchored probe was released from the sensing interface into the reaction solution. In this circumstance, the increased amount of the signal probe in reaction solution led to an enhanced fluorescence response, while the decreased amount of the signal probe on the sensing interface resulted in a diminished electrochemical response. According to the dual-channel signal change with increasing OTA concentration, the visual fluorescence strategy was established for intuitive OTA detection, and meanwhile, sensitive electrochemical assay with a detection limit of 0.024 pg/mL was also achieved with the help of one-step electrodeposition as a sensing platform. Moreover, the proposed dual-channel assay has been successfully applied to determine OTA levels in corn samples with rapid response, superior accuracy, and high anti-interference capability, providing a promising method for food safety monitoring.

A label-free electrochemical aptasensor based on platinum@palladium nanoparticles decorated with hemin-reduced graphene oxide as a signal amplifier for glypican-3 determination

An electrochemical aptasensor for highly sensitive detection of glypican-3 has been developed using the GPC3 aptamer as the biorecognition probe and H-rGO-Pt@Pd NPs as an electroactive reagent.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

A low-background fluorescent aptasensor for acetamiprid detection based on DNA three-way junction-formed G-quadruplexes and graphene oxide

A simple fluorescence detection platform has been established for acetamiprid assay based on DNA three-way junctions (TWJs), which can triple the fluorescence signal without any other amplification. It is designed with three single-stranded DNAs (ssDNA), each of which contains one-third or two-thirds of the G-quadruplex sequence at each end. Upon the addition of acetamiprid, the conformation of the aptamer-containing double-stranded DNA (dsDNA) changes from its original conformation and releases a strand of ssDNA. This ssDNA, with the other two ssDNAs, can assemble into DNA TWJs, and the three pairs of the branched ends of the DNA TWJs are adjacent to each other, allowing them to form three units of G-quadruplexes. Hence, the fluorescence of N-methyl mesoporphyrin IX (NMM) is lighted by the nascent G-quadruplexes. Graphene oxide (GO) is then added to minimize the detection background by absorbing the free NMM and non-target-induced ssDNA. The proposed strategy can assay acetamiprid in a wide linear range of 0-500 nM with a detection limit of 5.73 nM. More importantly, this assay platform demonstrates high potential for acetamiprid assay in food control and environmental monitoring.

Metal-organic framework precursors derived Ni-doping porous carbon spheres for sensitive electrochemical detection of acetaminophen

The sensitive and selective determination of acetaminophen (AP) in the human body is highly desirable to ensure human health. In this work, nickel-doping nanoporous carbon (Ni/C) was fabricated by directly calcining Ni based metal-organic framework (Ni-MOF). The Ni/C based electrochemical sensor was developed for sensitive and selective determination of AP in human blood serum and urine samples. The prepared Ni/C composite possess plentiful catalytic active sites, ordered mesoporous structure and large specific surface area, which endow the constructed Ni/C sensor with a prominent performance for acetaminophen sensing. Under the optimal conditions, the developed method offered good linearity in the range of 0.20-53.75 μM with a low detection limit (S/N = 3) of 4.04 × 10^-2 μM. The electrocatalytic performance of the sensor towards AP was further measured by differential pulse voltammetry and cyclic voltammetry. The results demonstrated that the Ni/C sensor can be feasibly employed for the determination of AP in human blood serum and urine samples with excellent anti-interference stability and good reproducibility. The research reveals a great promising of the Ni/C electrochemical sensor for clinical applications and paves a way for the construction of high-performance electrochemical sensors for AP determination.

Determination of acetamiprid using electrochemiluminescent aptasensor modified by MoS2QDs-PATP/PTCA and NH2-UiO-66

A novel aptasensor has been fabricated based on the resonance energy transform (RET) system from MoS₂QDs-PATP/PTCA (donor) to NH₂-UiO-66 (acceptor). The electrochemiluminescence (ECL) signal of PTCA was greatly amplified due to the decoration of MoS₂QDs-PATP, and the NH₂-UiO-66 was utilized to label the signal probe DNA (pDNA), which hybridizes with the exposed aptamer anchored on the surface of MoS₂QDs-PATP/PTCA. With the target acetamiprid, the specific binding of acetamiprid to aptamer causes the connection between the donor and the acceptor to be interrupted and produce an "on" ECL signal. Thus, an "off-on" ECL sensing platform for sensitive and selective acetamiprid assay was designed. Under the optimal condition, the ECL signal of the aptasensor was found to be linearly related to the logarithm of the acetamiprid concentration ranging from 0.1 fM to 0.1 μM with a detection limit of 0.064 fM. More importantly, the recovery rate of the ECL aptasensor was calculated to be 98.7 ~ 106% with a RSD lower 5.1% for the residual acetamiprid assay in real food samples, which indicated that the aptasensor has high potential for practical applications.

A "signal off" aptasensor based on NiFe2O4 NTs and Au@Pt NRs for the detection of deoxynivalenol via voltammetry

A "signal off" aptasensor has been developed to detect deoxynivalenol (DON). DON aptamers (Apt) were used as biological recognition elements, nickel ferrite nanotubes (NiFe₂O₄ NTs) are used as the base material to increase the surface area of the electrode, and the Au@Pt NRs were used as carriers for loading signal labels thionine (Thi) and complementary strand (cDNA). In the presence of DON it will be specifically captured by Apt, then the competition mechanism was triggered; the signal molecules fall off from the electrode surface, which then causes the electrode signal to decrease. NiFe₂O₄ NTs and Au@Pt NRs were characterized by transmission electron microscope (TEM), scanning electron micrograph (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The designed sensor provides a concentration range of 1 × 10^-8 to 5 × 10^-4 mg mL^-1 and limit of detection of 3.02 × 10^-9 mg mL^-1. Determination of DON in corn meal samples was investigated and the recovery was 98.4 to 103.5%. The proposed aptasensor displayed good sensitivity, high specificity, and acceptable reproducibility. Graphical abstract Based on NiFe₂O₄ NTs as substrate material and Au@Pt NRs as signal label prepared DON aptasensor for the determination of DON.