Determination of trace bisphenols in functional beverages through the magnetic solid-phase extraction with MOF-COF composite

Facile preparation of metal organic framework modified covalent organic framework for efficient dispersive solid-phase extraction of toxic basic dyes in food

High performance adsorbents are crucial for improving the efficiency of sample pretreatment and ensuring the accuracy and precision of analytical results. In this study, covalent organic framework COF-SCU1 was modified with metal-organic framework ZIF-8 for efficient extraction of toxic basic dyes in food. The prepared COF-SCU1@ZIF-8 exhibited improved dispersibility and more surface negative charges compared to COF-SCU1, thereby showing enhanced adsorption performance for auramine O, rhodamine B, basic orange 21, basic orange 22 and methylene blue. The dispersive solid-phase extraction (D-SPE) for toxic basic dyes based on COF-SCU1@ZIF-8 consumed tiny amount of adsorbent and solvent as well as short operation time. An analytical method for the determination of toxic basic dyes was developed based on D-SPE and high-performance liquid chromatography with detection limits of 0.9-1.6 ng mL-1. The developed method was applied to the detection of toxic basic dyes in real food samples with recoveries of 88.20-105.83 %.

Functionalized magnetic covalent organic frameworks with refining tunable cores for highly selective adsorption of immunosuppressive drugs

Immunosuppressant drugs (ISDs) are widely used in the treatment of organ rejection following human transplantation and in autoimmune diseases. Herein, this study demonstrates that carbonylated covalent organic frameworks (COFs) with pore-matching capabilities can serve as promising interference-resistant adsorbents for the rapid and efficient capture of ISDs (cyclosporin A (CsA), tacrolimus (FK-506), and rapamycin (RPM)) from complex whole blood matrices. Under optimized conditions, MCOF-2-COOH, with a pore size 1.5 times the diameter of the drug molecule, demonstrated superior ISDs adsorption performance, achieving an adsorption capacity of up to 84.95 mg g-1 in 10 min. Instrumental characterization and theoretical calculations elucidated the potential adsorption matrix, revealing that the COF provides multiple forces, including hydrogen bonding, electrostatics, and π-π interactions, with the carboxyl site playing a crucial role. This study provides both a theoretical basis and experimental evidence for the use of COF materials in the selective adsorption of drugs from complex matrices, as well as a strategy for designing functionally customized COFs for drug therapy monitoring applications.

Facile synthesis of fluorine-functionalized long-chain metal-organic frameworks for highly efficient enrichment and sensitive detection of bisphenols in water samples

The exceptional stability of long-chain metal-organic framework materials (MOFs) is crucial for preserving their adsorption capabilities and practical applications. Herein, a well-defined material (50.0 %4F-BDC@UiO-67) with enhanced stability and pollutant adsorption was successfully synthesized through a straightforward one-step method, utilizing Zr4+ as the metal ion and employing 4,4'-biphenyldicarboxylic acid, which contains two benzene rings, alongside tetrafluoroterephthalic acid (4F-BDC), which contains one benzene ring, as dual ligands. The 50.0 %4F-BDC@UiO-67 material was utilized for the enrichment of harmful bisphenol pollutants (BPs) from the environment. Experimental results demonstrated that the synthesized 50.0 %4F-BDC@UiO-67 sorbent exhibited significantly improved adsorptive capacity, with its enrichment performance for BPs being 1.5-6.3 times greater than that of pristine UiO-67. The interactions between the material and BPs were explored using density functional theory calculations and experimental characterization. Findings indicated that the incorporation of fluorine enhanced the π-π and coordination interactions between 50.0 %4F-BDC@UiO-67 and BPs, while also introducing additional hydrogen bonding interactions. This outcome offers insights for the future design of materials with superior enrichment capabilities. Leveraging multiple synergistic forces, and in conjunction with high-performance liquid chromatography-diode array detection, the developed method exhibited a broad linear range (0.1-200 ng mL-1), excellent correlation coefficients (0.9992-0.9996), and low detection limits (0.1-0.5 ng mL-1) for BPs. Satisfactory recoveries were achieved for actual water samples (82.9-105.9 %). This work presents a strategy for enhancing the stability and adsorption performance of long-chain MOFs.

Structure-based design and screening of hydrogel copolymer/Fe3O4 composite microspheres for magnetic solid phase extraction of bisphenol A from aqueous samples

It is of great significance to monitor bisphenol A (BPA) in the environment because of its potential environmental and health risks. However, the detection of trace or ultratrace BPA in complicated environmental samples is challenging due to the relatively low affinity and poor selectivity of existing adsorbents used in sample pretreatment. Herein, we report a high-affinity, low environment-dependent and strong interference-resistant abiotic affinity ligand, a N-methacryloyl-l-lysine-NH2 (MLys)-based hydrogel copolymer (HP 17) screened from a small focused polymer library engineered by incorporating various combinations and ratios of candidate functional monomers. The selection of these monomers was guided by molecular mechanism between BPA and the ligand-binding pocket of its estrogen receptors. The BPA-HP17 binding is mainly a synergistic effect of π-cation and hydrophobic interactions. The screened HP 17 has high adsorption capacity (349.4 mg/g) for BPA under wide pH (3.0-10.0) and ionic strength (0-150 mM) range. To improve its practicability, a hydrogel copolymer/Fe3O4 composite microspheres (Fe3O4@HP 17) was synthesized and applied for magnetic solid phase extraction-high-performance liquid chromatography (MSPE-HPLC) analysis of BPA in tap water, lake water and industrial effluents. The method shows wide linear range (2.5⁓100 ng/mL), high sensitivity (detection limit of 0.22 ng/mL even without further concentration after desorption), high accuracies (92.6⁓103.0 %) and good precisions (0.57⁓4.53 %), indicating a great potential of this material and method in the detection of trace or ultratrace BPA in complex environmental water samples.

Determination of multi-pesticide residues in agricultural products with a modified QuEChERS process based on magnetic biochar from coconut clothing

In this study, the magnetic biochar material derived from coconut clothing was firstly successfully synthesized by in-situ polymerization method and applied as QuEChERS adsorbents for extracting multi-pesticides. The obtained magnetic coconut-clothing biochar (MCCBC) presented alveolate structure with abundant large irregular pores. The Fe3O4 particles was obviously attached on the surface of biochar. Under the optimized conditions, the modified QuEChERS process based on MCCBC coupled with HPLC-MS/MS for simultaneously extracting and determining 12 pesticides (organophosphorus insecticides and strobilurins) from different agricultural products (tomato, cucumber, cabbage, carrot, peach, pear, grape, apple) was established. After pretreated by MCCBC, most of pesticides had weak matrix effect. This proposed method showed good linearity (2-250 ng g-1) with R2 ≥ 0.9915, and the limits of detection and the limits of quantification were in the range of 0.01-2.67 ng g-1 and 0.03-8.91 ng g-1, respectively. The acceptable recovery was between 71.1 % and 114.0 % with relative standard deviations from 0.31 % to 13.94 %. These results fully demonstrated that the developed method was efficient for simultaneously extracting and determining organophosphorus insecticides and strobilurins in complex agricultural matrix, possessing obvious advantages of higher sensitivity, easier operation and good feasibility. More importantly, this study provided a useful strategy for magnetizing biochar, and the novel biochar from coconut clothing was also introduced as potential adsorbent for other trace organic pollutants.

Amidoxime covalent organic framework@Fe3O4 based magnetic solid-phase extraction for rapid and sensitive determination of trace uranium in seafood

The unintentional dissemination of uranium into environment poses substantial risks to both food sources and human populations. An advanced method for convenient and accurate detection of uranium in food is thus a pressing need. Herein, a novel magnetic amidoxime functionalized covalent organic framework (TpDb-AO@Fe3O4), prepared with 2,5-dinitrobenzonitrile, 1,3,5-triformylphloroglucinol and hydroxylamine hydrochloride, was synthesized as adsorbent for magnetic-solid phase extraction (MSPE) of UO22+. Furthermore, a TpDb-AO@Fe3O4 based MSPE coupled with UV-vis spectrophotometer was successfully developed to realize the determination of uranyl ions with low limit of detection of 1.63 μg L-1, wide linear range of 10 - 200 μg L-1. The spiking recoveries in real seafood samples (tuna, yesso scallop, kelp, eel, hairtail) ranged from 94.1 % - 106.8 %. The intraday (n = 5) and interday (n = 5) relative standard deviation (RSD) for determination of UO22+were 3.33 % and 6.23 %, respectively. This approach represents an advancement in the rapid extraction and sensitive quantification of trace uranium contaminants in food matrices, thereby contributing to enhanced environmental monitoring and public health safeguards.

Post-modification of covalent organic framework functionalized aminated carbon nanotubes with active site (Fe) for the sensitive detection of luteolin

In this research, the TT-COF(Fe)@NH2-CNTs was innovatively prepared through a post-modification synthetic process functionalized TT-COF@NH2-CNTs with active site (Fe), where TT-COF@NH2-CNTs was prepared via a one-pot strategy using 5,10,15,20-tetrakis (para-aminophenyl) porphyrin (TTAP), 2,3,6,7-tetra (4-formylphenyl) tetrathiafulvalene (TTF) and aminated carbon nanotubes (NH2-CNTs) as raw materials. The complex TT-COF(Fe)@NH2-CNTs material possessed porous structures, outstanding conductivity and rich catalytic sites. Thus, it can be adopted to construct electrochemical sensor with glassy carbon electrode (GCE). The TT-COF(Fe)@NH2-CNTs/GCE can selectively detect luteolin (Lu) with a wide linear plot ranging from 0.005 to 3 μM and a low limit of detection (LOD) of 1.45 nM (S/N = 3). The Lu residues in carrot samples were determined using TT-COF(Fe)@NH2-CNTs sensor and UV-visible (UV-Vis) approach. This TT-COF(Fe)@NH2-CNTs/GCE sensor paves the way for the quantification of Lu through a cost-efficient and sensitive electrochemical approach, which can make a significant step in the sensing field based on crystalline COFs.

A Review on the Applications of Quantum Dots in Sample Preparation

In recent years, despite significant advances in preconcentration and preparation techniques that have led to efficient recovery and accurate measurement of target compounds. There is still a need to develop adsorbents with unique and efficient features such as high pore volume and surface area, reactivity, easy synthesis, low toxicity, and compatibility with the environment, which increase the adsorption capacity and increase extraction efficiency. Semiconductor nanocrystals called quantum dots (QDs) with a size of less than 10 nm are three-dimensional nanoparticles with a spherical, rod, or disc structure that have significant potential in extraction as adsorbents due to their excellent properties such as low toxicity, reactivity, environmental friendliness, and hydrophilic and hydrophobic interactions. One of the most basic issues in the development of adsorbents is to increase the effective surface and, as a result, their extraction efficiency. QDs, having an effective surface much higher than conventional nanomaterials, are a suitable option for extracting target compounds in different environments. This work comprehensively reviews QD-based extraction methods and surface modification strategies of QDs based on functional groups, ligands, and materials from 2013 to 2024. In addition, the applications of QD-based composites for the extraction of organic and inorganic analytes (residues of drugs in human blood and plasma, toxins, pesticides, pollutants from chemical industries, heavy metals, etc.) in different matrices are investigated.

Boronic acid functionalized of covalent organic framework for high performance capture of trace phthalates

In order to improve the enrichment performance of parent covalent organic frameworks (COFs), boronic acid functionalized of COF (COF-B(OH)2) was obtained by a simple standing method for the first time. The obtained COF-B(OH)2 exhibited the new characteristics that were not possessed by pure COF and was employed as the solid phase microextraction (SPME) coating material for highly efficient enrichment of trace endocrine disruptors phthalates (PAEs). Compared to pure COF, the synergistic effect of the newly emerged unique pore structure and boric acid interaction sites, and the large specific surface area and the abundant benzene ring structure inherited by original COF framework endowed COF-B(OH)2 with enhanced enrichment performance for PAEs. Combined with gas chromatography-mass spectrometry (GC-MS), COF-B(OH)2 exhibited the good linearity over a wide concentration of 0.1-3000 ng l-1 with good coefficients (R2, 0.9916-0.9998) for PAEs. The developed method was successfully employed for detection of trace PAEs in milk and water samples, demonstrating high recoveries (90.6-111.3 %). This work provides a sustainable approach to developing high-performance materials for enriching environmental pollutants.

Recent Progress and Applications of Advanced Nanomaterials in Solid-Phase Extraction

Sample preparation maintains a key bottleneck in the whole analytical procedure. Solid-phase sorbents (SPSs) have garnered increasing attention in sample preparation research due to their crucial roles in achieving high clean-up and enrichment efficiency in the analysis of trace targets present in complex matrices. Novel nanoscale materials with improved characteristics have garnered considerable interest across different scientific disciplines due to the limited capabilities of traditional bulk-scale materials. The purpose of this review is to offer a thorough summary of the latest developments and uses of SPSs in preparing samples for chromatographic analysis, focusing on the years 2020-2024. The techniques for preparing SPSs are examined, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), carbon nanoparticles (CNPs), molecularly imprinted polymers (MIPs), and metallic nanomaterials (MNs). Examining the pros and cons of different extraction methods, including solid-phase extraction (SPE), magnetic SPE (MSPE), flow-based SPE (FBA-SPE), solid-phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and dispersive SPE (DSPE), is the main focus. Furthermore, this article presents the utilization of SPE technology for isolating common contaminants in various environmental, biological, and food specimens. We highlight the persistent challenges in SPSs and anticipate future advancements and applications of novel SPSs.

Magnetic conjugated microporous polymer for rapid extraction and sensitive analysis of environmental endocrine disruptors in environmental waters and dairy products

BACKGROUND

Environmental endocrine disruptors (EEDs) are a class of new pollutants that are diffusely used in the medical industry and animal husbandry. In view of toxicity concerns, elevated levels of EEDs in the environment and food, which cause potential harm to human beings and ecosystems, must be monitored. Determination of EEDs contaminants to ensure environment and food safety has became a major concern worldwide, it is also a challenging task because of their trace level and probable matrices interference. Thus, developing rapid adsorption and efficient analysis methods for EEDs is apparently necessary.

RESULTS

A magnetic conjugated micro-porous polymer (Fe3O4@TbDt) was designed and synthesized, which was endowed with large specific surface area, rich functional groups and magnetic responsiveness. The material showed high extraction efficiency for EEDs via magnetic solid-phase extraction (MSPE). The quantum chemistry calculations showed the adsorption mechanism of Fe3O4@TbDt on EEDs mainly included electrostatic interactions, van der waals forces (N-H … π interaction, C-H … π interaction), and multiple hydrogen bonds. Finally, a trace analysis method for nine EEDs was established combined with HPLC-MS/MS under optimized MSPE conditions. The method showed a good linearity (R2 ≥ 0.996), low limits of detection (0.25-5.1 ng L-1), high precision (RSD of 1.1-8.2 %, n = 6). The applicability of this method was investigated by analyzing four water samples and two dairy products, and satisfactory recovery rates (82.1-100.7 %) were obtained. The proposed method showed the potential for the analysis of EEDs residues in food and environmental samples.

SIGNIFICANCE

The developed MSPE method based on conjugated micro-porous polymers (CMPs) is simple, green, and efficient compared to existing techniques. The application of CMPs provides a new idea for preparing versatile sample pre-treatment materials. What's more, this work has certain reference value for addressing of EEDs residues in the environment and food.

Development of a Novel SPME Coating for Efficient Extraction of Organochlorine Pesticides in Liquid Dairy Products

A sensitive and accurate analysis of organochlorine pesticide (OCP) residues in dairy products poses a significant challenge. Herein, a novel covalent organic polymer, Azo-COP-1, was synthesized for the enhanced extraction of OCPs in dairy products. The solid phase microextraction fiber coated with Azo-COP-1 demonstrated excellent extraction performance for the OCPs via hydrogen bonding, halogen bonding, π-π stacking, and electrostatic interactions. Coupled with gas chromatography-electron capture detection, we developed a facile and reliable method for detecting OCPs in six types of dairy products with low limits of detection (2.0-400 pg g-1) and high method recoveries (82.6-113%). Azo-COP-1 coatings exhibited good stability and durability. The results verified the feasibility of using Azo-COP-1-based SPME to extract OCP residues in dairy product samples, highlighting its potential for routine monitoring of pesticide residues and food safety assessments.

High-Performance enrichment and sensitive analysis of bisphenol and its analogues in water and milk using a novel Ni-Based cationic Metal-Organic framework

A novel cationic metal-organic framework (iMOF-Ni) was designed and synthesized by a solvothermal method. It was fabricated as a solid-phase extraction (SPE) cartridge and exhibited high adsorption performance for Bisphenols (BPs). The theoretical simulation demonstrated that the adsorption mechanism between iMOF-Ni and BPs was attributed to cation-π bonding, π-π interaction, and electrostatic interactions. Under optimized SPE, a method for analyzing BPs was established by combining high-performance liquid chromatography-diode array detection (HPLC-DAD). The developed method has good linearity (R2 ≥ 0.994), low detection limits (0.07-0.16 ng/mL), and good reproducibility (1.72-6.35 %, n = 6). The applicability of the method was further evaluated by analyzing water and milk samples. Recoveries of four BPs in spiked samples were from 72.2 % to 96.6 %.

Effective extraction and determination of 24 quinolones in water and egg samples using a novel magnetic covalent organic framework combined with UPLC-MS/MS

The excessive use of quinolones (QNs) has seriously threatened human health. In this study, a novel functionalized magnetic covalent organic framework Fe3O4@SiO2@Ah-COF was fabricated with biphenyl-3,3',5,5'-tetracarbaldehyde and hydrazine hydrate (85%) as monomers and was used as a magnetic solid-phase extraction (MSPE) absorbent for the determination of 24 QNs in water and egg samples through ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The extraction parameters of MSPE were optimized, including pH, adsorbent dosage, adsorption time, and eluent type. An effective and rapid detection method was then established, which showed good linearity (R2 ≥ 0.9990), low limits of detection (0.003-0.036 μg L-1) and low limits of quantitation (0.008-0.110 μg L-1) for QNs. The good recoveries of 24 QNs in water and egg samples were in the range of 70.3-106.1% and 70.4-119.7%, respectively, with relative standard deviations lower than 10% (n = 5). As a result, Fe3O4@SiO2@Ah-COF is a promising magnetic adsorbent, and the established method was successfully applied for the determination of 24 QNs in water and egg samples.

Green and Facile Preparation of Covalent Organic Frameworks Based on Reaction Medium for Advanced Applications

Covalent organic frameworks (COFs), as a new class of crystalline, well-ordered, and porous materials with intermittent constructions, are formed via organic structural parts connected through covalent bonds. These materials have been employed in several fields comprising pollutant adsorption and separation, catalysis, electrical conductivity, gas storage, etc. The preparation of COFs is mainly applied in tubes with high temperatures and degassing treatment. Furthermore, the reaction medium is involved in toxic organic solvents like toluene, dioxane, mesitylene, acetonitrile, and so on. Hence, discovering clean medium and green approaches has attracted wide attention. Recently, facile, less dangerous, and greener methods have been developed for COFs synthesis in diverse applications like performing the reaction at ambient temperature or employing aqueous solvents, ionic liquids, and a mixture of organic solvents/water. This review article summarizes the eco-friendly production approaches of COFs for diverse applications.

Fe3O4@UiO-66-NH2 based on magnetic solid phase extraction for determination of organic UV filters in environmental water samples

In this work, a nanocomposite structured magnetic metal-organic framework named as Fe3O4@UiO-66-NH2 was prepared via a simple hydrothermal approach. The as-mentioned nanocomposite was characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and the Brunauer-Emmett-Teller (BET) techniques. Using the Fe3O4@UiO-66-NH2 as a nanosorbent, an easy and highly effective approach was developed to preconcentrate nine organic UV filters before gas chromatography-mass spectrometry (GC-MS) analysis. Different conditions influencing the extraction efficiency encompassing the sorbent amount, nature and volume of desorption solvent, desorption time, pH of the sample, and extraction time, were examined. Under the optimal experimental parameters, the Fe3O4@UiO-66-NH2-based magnetic solid phase extraction and GC-MS (MSPE-GC-MS) demonstrated linearity in the range of 0.03-1500 ng/L (R2 ≥ 0.9974) and the reproducibility, expressed as RSD, was ≤7.5%. The limits of detection ranged between 0.01 and 0.07 ng/L and limits of quantification were in the range of 0.03-0.4 ng/L. Finally, the suggested approach was satisfactorily utilized to determine nine organic UV filters in different water samples (analytical recoveries between 86.5% and 104.2%).

A stable core-shell metal-organic framework@covalent organic framework composite as solid-phase extraction adsorbent for selective enrichment and determination of flavonoids

Hydrophobization and stability is crucial for the practical application of most metal-organic frameworks (MOFs) in extraction technique. In this study, a stable core-shell MOF@COF composite (NH2-MIL-101(Fe)@TAPB-FPBA-COF) was successfully prepared by Schiff base reaction and applied to solid-phase extraction (SPE) of hydrophobic flavonoids. Notably, the TAPB-FPBA-COF shell acts as a hydrophobic "shield", which not only improves the hydrophobicity and stability of hydrophilic NH2-MIL-101(Fe), but also makes the extraction efficiency of flavonoids from MOF@COF composite significantly higher than that of pure NH2-MIL-101(Fe) and TAPB-FPBA-COF. In addition, a sensitive analytical method with excellent linearities (0.1-500 ng mL-1, R2 ≥ 0.9967), low limits of detection (0.02-0.04 ng mL-1 for water; 0.04-0.07 ng mL-1 for grape juice; 0.06-0.08 ng mL-1 for honey), good repeatability (intra-day/inter-day precision are 1.86-5.37%/1.82-7.79%, respectively) and only 5 mg of adsorbent per cartridge was established by optimizing the SPE process combined with high performance liquid chromatography with ultraviolet-visible detector (HPLC-UV). Meanwhile, selectivity study and comparative experiments with the commercial C18 adsorbent showed that the MOF@COF adsorbent exhibited satisfactory extraction efficiency for flavonoids due to multiple interactions such as hydrogen bonding, hydrophobic, and π-π interactions. Finally, the good recoveries in grape juice (84.5-102.5%) and honey (87.5-104.6%) samples further validated the applicability of the proposed method in complex samples.

A simple and portable vacuum assisted headspace solid phase microextraction device coupled to gas chromatography based on covalent organic framework/metal organic framework hybrid for simultaneous analysis of volatile and semi-volatile compounds in soil

Various microextraction methods have demonstrated a positive effect when assisted by vacuum. However, working with such systems is often laborious, they often require expensive and non-portable vacuum pumps, and may even suck off some sample vapor or solid particles during the evacuation process. To address these issues, a simple, and affordable vacuum-assisted headspace solid-phase microextraction (HS-SPME) device was developed in this study. The device, named In Syringe Vacuum-assisted HS-SPME (ISV-HS-SPME), utilizes an adjustable 40 mL glass syringe as a vacuum provider and sampling vessel. A new fiber coating, made from a hybrid of covalent triazine-based frameworks and metal-organic frameworks (COF/MOF), was prepared and characterized by Fourier transform infrared spectrometry, field emission scanning electron microscopy, energy dispersive X-ray, X-ray diffraction, thermogravimetric analysis, and Brunauer-Emmett-Teller techniques for use in the ISV-HS-SPME. By optimizing parameters such as extraction temperature, extraction time, desorption temperature, desorption time, and, humidity using a simplex method, the ISV system was found to increase the extraction efficiency of polycyclic aromatic hydrocarbons (PAHs) and benzene, toluene, ethylbenzene, and xylenes (BTEX) in solid samples by up to 175%. The determinations were followed by GC-FID measurements. Compared to three commercially available fibers, the ISV-HS-SPME device with the COF/MOF (2DTP/MIL-101-Cr) fiber exhibited significantly higher peak areas for PAHs and BTEX. The linear dynamic ranges for BTEX and PAHs were 7.1-9000 ng g-1 and 0.23-9000 ng g-1, respectively, with limits of detection ranging from 2.1-5 ng g-1 for BTEX and 0.07-1.6 ng g-1 for PAHs. The relative standard deviation of the method was 2.6-7.8% for BTEX and 1.6-6.7% for PAHs. The ISV-HS-SPME was successfully used to simultaneously determine PAHs and BTEX in polluted soil samples with recoveries ranging from 80.4 to 108%.

Covalent organic framework in situ grown on the metal-organic framework as fiber coating for solid-phase microextraction of polycyclic aromatic hydrocarbons in tea

A novel MIL-88-NH2@COF composite was produced by in situ growth of covalent organic framework (COF) on the metal-organic framework (MOF) surface. To obtain a coating fiber for solid-phase microextraction (SPME), the MIL-88-NH2@COF composite physically adhered to the stainless steel wire. Combined with gas chromatography-flame ionization detection (GC-FID), various analytes such as chlorophenols (CPs), phthalates (PAEs), and polycyclic aromatic hydrocarbons (PAHs) were extracted and determined to evaluate the extraction performance of MIL-88-NH2@COF coated fibers and explore their extraction mechanism. This composite exhibit excellent extraction performance and adsorption capacity for various analytes, especially for PAHs with enrichment factor up to 9858. The SPME-GC-FID method based on MIL-88-NH2@COF fiber was established for the determination of five PAHs after the main extraction conditions were optimized. Under optimal conditions, the proposed technique showed a wide linear range (1-150 ng mL-1) with a low limit of detection (0.019 ng mL-1) and a high coefficient of determination (R2 > 0.99). The developed SPME-GC-FID method was used to determine PAHs in green tea and black tea samples, with good recoveries of 51.70-103.64% and 68.56-103.64%, respectively. It is worth mentioning that this is the first time MIL-88-NH2@COF composites have been prepared and applied to SPME. The preparation method of the composite provides a new idea in adsorbent preparation, which will contribute to the field of SPME.

β-Cyclodextrin functionalized magnetic polyamine-amine dendrimers for high enrichment and effective analysis of trace bisphenolic pollutants in beverages

Bisphenols (BPs) are typical endocrine disruptors, which can cause great effects on environmental, organisms and human health. In this study, β-Cyclodextrin (β-CD) functionalized polyamidoamine dendrimers-modified Fe₃O₄ nanomaterials (MNPs@PAMAM (G3.0)@β-CD) were facilely synthesized. It exhibited good adsorption capacities for BPs, which was utilized to construct a sensitive tool in combination with high performance liquid chromatography for monitoring BPs such as bisphenol A (BPA), tetrabromobisphenol A (TBBPA), bisphenol S (BPS), bisphenol AF (BPAF) and bisphenol AP (BPAP) in beverage samples. The factors affecting the enrichment were examined such as generation of adsorbent, dosage of adsorbent, type and volume of eluting solvent, elution time and pH value of sample solution. The optimal parameters for enrichment was as follows: dosage of adsorbent, 60 mg; adsorption time, 50min; sample pH, pH7; elutent, 9 mL mixture of methanol and acetone(1:1); elution time, 6min; sample volume, 60 mL. The experimental results demonstrated that the adsorption conformed to pseudo-second-order kinetic model and Langmuir adsorption isotherm model. The results showed the maximum adsorption capacities of BPS, TBBPA, BPA, BPAF and BPAP were 131.80 μgg^-1, 139.84 μgg^-1, 157.08 μgg^-1, 142.11 μgg^-1 and 134.23 μgg^-1, respectively. Under optimal conditions, BPS had good linear relationship over range from of 0.5-300 μgL^-1, and the linear ranges of BPA, TBBPA, BPAF and BPAP ranged from 0.1 to 300 μgL^-1. The limits of detection (S/N = 3) for BPs were good in range of 0.016-0.039 μgL^-1. The spiked recoveries of target bisphenols (BPs) in beverages were approving over range from 92.3% to 99.2%. The established method possessed merits of easy to operate, good sensitivity, rapidness as well as environmental friendliness, and which earned great application potential for the enrichment and detection of trace BPs in practical samples.

[Recent application advances of covalent organic frameworks for solid-phase extraction]

Covalent organic frameworks (COFs) are a type of crystalline porous polymers. It firstly prepared by thermodynamically controlled reversible polymerization to obtain chain units and connecting small organic molecular building units with a certain symmetry. These polymers are widely used in gas adsorption, catalysis, sensing, drug delivery, and many other fields. Solid-phase extraction (SPE) is a fast and simple sample pretreatment technology that can enrich analytes and improve the accuracy and sensitivity of analysis and detection; it is extensively employed in food safety detection, environmental pollutant analysis, and several other fields. How to improve the sensitivity, selectivity, and detection limit of the method during sample pretreatment have become a topic of great interest. COFs have recently been applied to sample pretreatment owing to their low skeleton density, large specific surface area, high porosity, good stability, facile design and modification, simple synthesis, and high selectivity. At present, COFs have also attracted extensive attention as new extraction materials in the field of SPE. These materials have been applied to the extraction and enrichment of diverse types of pollutants in food, environmental, and biological samples, such as heavy metal ions, polycyclic aromatic hydrocarbons, phenol, chlorophenol, chlorobenzene, polybrominated diphenyl ethers, estrogen, drug residues, pesticide residues, etc. COFs can be synthesized from different materials and exert different effects on different extracts. New types of COFs can also be synthesized via modification to achieve better extraction effects. In this work, the main types and synthesis methods of COFs are introduced, and the most important applications of COFs in the fields of food, environment and biology in recent years are highlighted. The development prospects of COFs in the field of SPE are also discussed.

Room-temperature synthesis of dual-functionalized magnetic microporous organic network for efficient extraction of vanillins in food

Microporous organic networks (MONs) are promising materials for the magnetic solid-phase extraction (MSPE) of trace targets from diverse complex samples. However, all the reported magnetic MONs (MMONs) are mono-functionalized and synthesized by refluxing at high temperatures, which is not an energy-efficient and environmentally friendly method. Here, for the first time, we report the room-temperature fabrication of a novel dual-functionalized MMON (MMON-B) for the efficient MSPE of typical vanillin additives from food samples prior to high-performance liquid chromatography (HPLC). The conjugated MMON-B with numerous -OH and -NH₂ groups afforded good extraction for vanillins via π-π, hydrophobic, and hydrogen-bonding interactions. The factors affecting the extraction were studied in detail. Under the optimal conditions, the developed MMON-B-MSPE-HPLC-UV method exhibited wide linear range (0.50-1200 μg L^-1), low limits of detection (0.10-0.15 μg L^-1), and good reusability and stability. Therefore, MMON-B was successfully used to enrich vanillins in complex food samples. The morphology and extraction efficiency of the room-temperature synthesized MMON-B were comparable with those of the MMON-B synthesized via the conventional reflux method, indicating that the room-temperature fabrication method is a good alternative to the reflux method. This study presents the feasibility of using a room-temperature method for synthesizing dual-functionalized MONs, and the findings may significantly promote the application of MONs in the MSPE of trace targets from complex matrices.

Determination of trace bisphenols in milk based on Fe3O4@NH2-MIL-88(Fe)@TpPa magnetic solid-phase extraction coupled with HPLC

Herein, a covalent organic framework (COF) was grown on a magnetic metal-organic framework (MOF) by a solvothermal method for the efficient extraction of bisphenols (BPs). The magnetic solid-phase extraction (MSPE) of four bisphenols (bisphenol A, bisphenol B, bisphenol AF and bisphenol C) was carried out without adjusting the pH and salt concentration. When 30 mg Fe₃O₄@NH₂-MIL-88(Fe)@TpPa was used to adsorb for 25 min, 6 mL methanol was used to elute for 20 min, and the extract was detected by high-performance liquid chromatography (HPLC). The proposed method has a low detection limit of 0.011-0.036 ng mL^-1, a wide linear range of 0.05-100 ng mL^-1, and a correlation coefficient (R²) of 0.9980-0.9998. The intra-day and inter-day precisions are 0.74-2.54% and 1.68-3.72%, respectively. Bisphenol A was determined by applying the proposed method to the determination of actual milk samples. The standard addition experiment showed that the relative recovery of the four bisphenols was 85.70-119.7%. Pseudosecond-order, first-order, Langmuir and Freundlich models were applied to explore the adsorption characteristics of Fe₃O₄@NH₂-MIL-88(Fe)@TpPa. In general, the established Fe₃O₄@NH₂-MIL-88(Fe)@TpPa-MSPE-HPLC-UV method exhibits attractive sensitivity, simple manipulation, and excellent reusability, and it has excellent prospects for the detection of trace BPs in complex milk matrices.

MOF/COF heterostructure hybrid composite-based molecularly imprinted photoelectrochemical sensing platform for determination of dibutyl phthalate: A further expansion for MOF/COF application

A novel metal-organic framework (MOF)/covalent-organic framework (COF) heterostructure hybrid composite (NH₂-UiO-66/TpPa-1-COF) with excellent photoactivity was developed, which further acted as the photoelectrochemical sensitized layer of a molecularly imprinted photoelectrochemical (MIP-PEC) sensor for extremely sensitive and selective determination of dibutyl phthalate (DBP). The NH₂-UiO-66/TpPa-1-COF was synthesized using a simple one-step solvothermal method, which showed improved photocurrent response owing to heterojunction formation, favorable energy-band configuration and strong light absorption capacity. To improve the sensing performance, molecularly imprinted polymer (MIP) was developed by sol-gel polymerization method as the recognition component of PEC sensor. The specific binding of imprinting sites towards DBP could block the electron transfer, causing decreased photocurrent response of the MIP-PEC sensor. The MIP-PEC sensor showed a wide detection range from 0.1 nmol L^-1 to 100 μmol L^-1 with a limit of detection of 3.0 × 10^-11 mol L^-1 under optimal conditions. Meanwhile, the proposed MIP-PEC sensor showed good stability, selectivity, reproducibility, and applicability in real samples. This is the first attempt to apply MOF/COF heterostructure hybrid composite for MIP-PEC sensor construction, providing new insight into the potential applications of microporous crystalline framework heterostructure hybrid composite in the sensing field.

One-step fabrication of hydrophobic metal-organic framework@covalent organic framework hybrid as sorbent for high-performance solid-phase extraction of flavonoids

Metal-organic framework (MOF) and covalent organic framework (COF) exhibit excellent extraction performance in sample pretreatment, but their wider application is hindered by some inherent drawbacks. Herein, we successfully synthesized a novel MOF@COF hybrid material with large specific surface area, good chemical stability and reusability, which is suitable as a solid phase extraction (SPE) sorbent for the efficient extraction of flavonoids. Importantly, due to the synergistic effect, the obtained MOF@COF hybrid material showing a higher extraction efficiency than individual MOF and COF. This is mainly due to the obtained MOF@COF hybrid material combines the high specific surface area of MOF and multiple interactions (hydrophobic interaction, hydrogen bonding and π-π stacking interaction) with flavonoids conferred by the COF structure. Then, a sensitive analytical method for flavonoids with ideal linear range (1-500 ng mL^-1), low detection limit (0.15-0.41 ng mL^-1) and good repeatability (2.64-6.20%) was developed under optimized conditions. In addition, the MOF@COF hybrid sorbent has better selectivity for hydrophobic targets containing multiple hydrogen bond acceptors/donors. Finally, the established method was applied to the determination of flavonoids in different food samples, and satisfactory recoveries (81.4-102.1%) were obtained, which initially confirmed its applicability.

Fluorine-Functionalized Triazine-Based Porous Organic Polymers for the Efficient Adsorption of Aflatoxins

Food safety issue caused by aflatoxins has aroused widespread concern in society. Herein, a novel fluorine-functionalized triazine-based porous organic polymer (F-POP) was developed for the first time by the simple condensation polymerization of 2,2'-bis(trifluoromethyl)benzidine and cyanuric chloride. With in-built fluorine functional group (F) and imine group (-NH-), F-POP displayed significantly superior adsorption ability for aflatoxins, outperforming fluorine-free POP due to the multiple interaction mechanisms of hydrogen bond, F-O interaction, π-π interaction, F-π interaction, and hydrophobic interaction. Thus, magnetic F-POP was prepared by introducing Fe₃O₄ into F-POP and then utilized as a magnetic sorbent for the extraction of trace aflatoxins in peanut and rice samples prior to high-performance liquid chromatography-fluorescence detection. Under the optimal conditions, the proposed method presented high sensitivity with the limit of detections at 0.005-0.15 ng g^-1. F-POP also exhibited outstanding adsorption capability for many other organic pollutants, revealing its great potential for analysis or adsorption applications.

Post-synthetic modification of a magnetic covalent organic framework with alkyne linkages for efficient magnetic solid-phase extraction and determination of trace basic orange II in food samples

Efficient magnetic solid phase extraction using covalent organic frameworks (COFs) can find important applications in food safety. In this work, a sulfonate-functionalized magnetic COF (Fe₃O₄@COF-SO₃Na) was synthesized by self-polycondensation of two-in-one monomer 1,6-bis(4-formylphenyl)-3,8-bis((4-aminophenyl) ethynyl)) pyrene (BFBAEPy) on the surface of aminated Fe₃O₄ and a thiol-yne click reaction. It was further adopted as an adsorbent for the efficient magnetic solid-phase extraction (MSPE) of basic orange II. The selective adsorption experiment indicated that it displayed selective adsorption ability to basic orange II due to the ion exchange, hydrogen bonds, and π-π interactions. Under the optimized conditions, the proposed MSPE method coupled with HPLC-DAD showed excellent linearity in the range of 0.05-0.5 µg/mL (R² = 0.9997) for basic orange II. The lower limits of detection (LODs) for basic orange II were 1.0-1.4 µg/L for three food samples: yellow croaker, paprika and dried bean curd. The recoveries were 90.1-98.8% with relative standard deviations (RSDs) below 4.2%. Therefore, this work provides an effective strategy to modify magnetic COFs as absorbents in MSPE. Due to the tunability of functional groups in thiol‑yne click reactions, the functional groups of magnetic COFs can be readily designed to enrich their multifunctional applications. Meanwhile, this work proposed a new method to detect trace amounts of basic orange II in food samples.

Facile synthesis of Cu2+-immobilized magnetic covalent organic frameworks for highly efficient enrichment and sensitive determination of five phthalate monoesters from mouse plasma with HPLC-MS/MS

Development of a simple, highly selective, and sensitive analytical method for phthalate monoesters (mPAEs) remains a challenge due to the complexity of biological samples. To address this issue, Cu²⁺ immobilized magnetic covalent organic frameworks (Fe₃O₄@TtDt@Cu²⁺ composites) with core-shell structures were prepared to enhance the enrichment efficiency of mPAEs by a facile approach synthesis of COFs shells with inherent bifunctional groups on Fe₃O₄ NPs and further Cu²⁺ immobilization. The composites exhibit high specific surface area (348.1 m² g^-1), outstanding saturation magnetization (34.94 emu g^-1), ordered mesoporous structure, Cu²⁺ immobilization, and excellent thermal stability. Accordingly, a magnetic solid-phase extraction (MSPE) pretreatment technique based on Cu²⁺ immobilized COF composites combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established, and key parameters including the adsorbent amount, adsorption time, elution solvent, etc. were examined in detail. The developed analytical method showed wide linear ranges (10-8000 ng L^-1), low limit of detections (LODs, 2-10 ng L^-1), and good correlation coefficients (R² ≥ 0.9904) for the five mPAEs. Furthermore, the analytical method was also successfully applied to the highly sensitive detection of metabolite mPAEs in mouse plasma samples, indicating the promising application of the Fe₃O₄@TtDt@Cu²⁺ composites as a quick and efficient adsorbent in the sample pretreatment.

Recent advances and applications of magnetic covalent organic frameworks in food analysis

Recently, covalent organic frameworks (COFs) have been widely used to prepare magnetic adsorbents for food analysis due to their highly tunable porosity, large specific surface area, excellent chemical and thermal stability and large delocalised π-electron system. This review summarises the main types and preparation methods of magnetic COFs and their applications in food analysis for the detection of pesticide residues, veterinary drugs, endocrine-disrupting phenols and estrogens, plasticisers and other food contaminants. Furthermore, challenges and future outlook in the development of magnetic COFs for food analysis are discussed.

Smart Portable Device Based on the Utilization of a 2D Disposable Paper Stochastic Sensor for Fast Ultrasensitive Screening of Food Samples for Bisphenols

Since the determination of the high toxicity of bisphenol A, alternative structures for bisphenols have been synthesized, resulting in bisphenols C, E, F, S, and Z. These bisphenols have replaced bisphenol A in plastic bottles, toys, and cans used for preserving food. Later, the toxicity and negative effects of all of these bisphenols on people's health were proven. Therefore, there is a need for a fast ultrasensitive screening method that is able to detect the presence of these bisphenols in any condition directly from food samples. This paper presented a disposable device based on the utilization of a 2D disposable paper stochastic sensor for the fast ultrasensitive screening of food samples for bisphenols A, C, E, F, S, and Z. The 2D disposable sensor was obtained by the deposition of graphene and silver nanolayers on paper using cold plasma. Furthermore, the active side of the sensor was modified using 2,3,7,8,12,13,17,18-octaethyl-21H,23H Mn porphyrin. The limits of quantification of these bisphenols were 1 fmol L^-1 for bisphenols C and E, 10 fmol L^-1 for bisphenols A and F, 10 pmol L^-1 for bisphenol S, and 1 pmol L^-1 for bisphenol Z. The recoveries of these bisphenols in milk, canned fruits, vegetables, and fish were higher than 99.00% with RSD (%) values lower than 1.50%.

A review of the modern principles and applications of solid-phase extraction techniques in chromatographic analysis

Analytical processes involving sample preparation, separation, and quantifying analytes in complex mixtures are indispensable in modern-day analysis. Each step is crucial to enriching correct and informative results. Therefore, sample preparation is the critical factor that determines both the accuracy and the time consumption of a sample analysis process. Recently, several promising sample preparation approaches have been made available with environmentally friendly technologies with high performance. As a result of its many advantages, solid-phase extraction (SPE) is practiced in many different fields in addition to the traditional methods. The SPE is an alternative method to liquid-liquid extraction (LLE), which eliminates several disadvantages, including many organic solvents, a lengthy operation time and numerous steps, potential sources of error, and high costs. SPE advanced sorbent technology reorients with various functions depending on the structure of extraction sorbents, including reversed-phase, normal-phase, cation exchange, anion exchange, and mixed-mode. In addition, the commercial SPE systems are disposable. Still, with the continual developments, the restricted access materials (RAM) and molecular imprinted polymers (MIP) are fabricated to be active reusable extraction cartridges. This review will discuss all the theoretical and practical principles of the SPE techniques, focusing on packing materials, different forms, and performing factors in recent and future advances. The information about novel methodological and instrumental solutions in relation to different variants of SPE techniques, solid-phase microextraction (SPME), in-tube solid-phase microextraction (IT-SPME), and magnetic solid-phase extraction (MSPE) is presented. The integration of SPE with analytical chromatographic techniques such as LC and GC is also indicated. Furthermore, the applications of these techniques are discussed in detail along with their advantages in analyzing pharmaceuticals, biological samples, natural compounds, pesticides, and environmental pollutants, as well as foods and beverages.

Multiple cobalt active sites evenly embedded in mesoporous carbon nanospheres derived from a polymer-metal-organic framework: efficient removal and photodegradation of malachite green

A series of robust photocatalysts of mesoporous carbon nanospheres embedded with multiple cobalt active sites (Co/Co x O y @mC) have been constructed for efficient removal and photodegradation of malachite green (MG). Here, a cobalt-based polymeric-metal-organic framework (polyMOF(Co)) was constructed by using a polyether ligand containing 1,4-benzenedicarboxylic acid units. Afterward, polyMOF(Co) was calcined into a series of Co/Co x O y @mC hybrids at diverse high temperatures (400, 600, and 800 °C) under a N2 atmosphere. Therefore, Co coordination centers were transformed into various active sites such as Co, CoO, and Co3O4, which were embedded within the mesoporous carbon network derived from the polymeric skeleton. Considering the even distribution of Co-related active species and high porosity inherited from polyMOF(Co), the constructed Co/Co x O y @mC hybrid obtained at 600 °C illustrated higher removal ability (79%) with a maximum adsorption capacity of 314 mg g-1 within 120 min and better photodegradation performance (degradation rate of 95%) toward MG than those of the other photocatalysts obtained at 400 and 800 °C. Moreover, the possible photocatalytic reaction mechanisms, including the transfer behavior of charge carriers, generation of reactive species, and intermediate degradation of products, were provided. The present work showed an alternative strategy for the feasible and efficient preparation of photocatalysts based on MOFs.

MOF/COF hybrids as next generation materials for energy and biomedical applications

The rapid increase in the number and variety of metal organic frameworks (MOFs) and covalent organic frameworks (COFs) has led to groundbreaking applications in the field of materials science and engineering. New MOF/COF hybrids combine the outstanding features of MOF and COF structures, such as high crystallinities, large surface areas, high porosities, the ability to decorate the structures with functional groups, and improved chemical and mechanical stabilities. These new hybrid materials offer promising performances for a wide range of applications including catalysis, energy storage, gas separation, and nanomedicine. In this highlight, we discuss the recent advancements of MOF/COF hybrids as next generation materials for energy and biomedical applications with a special focus on the use of computational tools to address the opportunities and challenges of using MOF/COF hybrids for various applications.

A review on recent advances in the applications of composite Fe3O4 magnetic nanoparticles in the food industry

Fe3O4 magnetic nanoparticles (MNPs) have attracted tremendous attention due to their superparamagnetic properties, large specific surface area, high biocompatibility, non-toxicity, large-scale production, and recyclability. More importantly, numerous hydroxyl groups (-OH) on the surface of Fe3O4 MNPs can provide coupling sites for various modifiers, forming versatile nanocomposites for applications in the energy, biomedicine, and environmental fields. With the development of science and technology, the potential of nanotechnology in the food industry has also gradually become prominent. However, the application of composite Fe3O4 MNPs in the food industry has not been systematically summarized. Herein, this article reviews composite Fe3O4 MNPs, including their properties, modifications, and physical functions, as well as their applications in the entire food industry from production to processing, storage, and detection. This review lays a solid foundation for promoting food innovation and improving food quality and safety.

Anoxybacillus flavithermus loaded ɣ-Fe2O3 magnetic nanoparticles as an efficient magnetic sorbent for the preconcentrations of Cu(II) and Mn(II)

It was hypothesized that -iron( oxide nanoparticles (ɣ-Fe₂O₃ NPs) functionalized with Anoxybacillus flavithermus (A. flavithermus) as an effective magnetic sorbent for the preconcentrations of toxic metal ions. It is clear to conclude that the main novelty of this study is that ɣ-Fe₂O₃ NPs loaded with A. flavithermus is selective-specific for Cu(II), Mn(II). Structural functional groups of the samples were elucidated by FTIR, and SEM. Significant experimental parameters were investigated in detail. 0.2 mL min^-1 of flow rate, 5 mL of 1 M of hydrochloric acid as eluent, 150 mg biogenic mass sample, and 150 mg ɣ-Fe₂O₃ NPs for supporting material were found as the best conditions. This developed method has been tested and verified using certified and standard reference materials. As a result of the studies, the pre-concentration factor of the Cu(II), Mn(II) metals was calculated as 40. All measurements showed that the developed solid-phase extraction (SPE) columns are available for 32 cycles. The use of ɣ-Fe₂O₃ NPs equipped with A. flavithermus as an effective magnetic sorbent for the first measurements of ions was thoroughly studied. In order of the biosorption capacities were calculated as 26.0, and 30.3 mg/g for Cu(II), Mn(II), respectively. The developed method for specifying the samples showed excellent to excellent results.

Fabrication of Magnetic Al-Based Fe3O4@MIL-53 Metal Organic Framework for Capture of Multi-Pollutants Residue in Milk Followed by HPLC-UV

The efficient capture of multi-pollutant residues in food is vital for food safety monitoring. In this study, in-situ-fabricated magnetic MIL-53(Al) metal organic frameworks (MOFs), with good magnetic responsiveness, were synthesized and applied for the magnetic solid-phase extraction (MSPE) of chloramphenicol, bisphenol A, estradiol, and diethylstilbestrol. Terephthalic acid (H₂BDC) organic ligands were pre-coupled on the surface of amino-Fe₃O₄ composites (H₂BDC@Fe₃O₄). Fe₃O₄@MIL-53(Al) MOF was fabricated by in-situ hydrothermal polymerization of H₂BDC, Al (NO₃)₃, and H₂BDC@Fe₃O₄. This approach highly increased the stability of the material. The magnetic Fe₃O₄@MIL-53(Al) MOF-based MSPE was combined with high-performance liquid chromatography-photo diode array detection, to establish a novel sensitive method for analyzing multi-pollutant residues in milk. This method showed good linear correlations, in the range of 0.05–5.00 μg/mL, with good reproducibility. The limit of detection was 0.004–0.108 μg/mL. The presented method was verified using a milk sample, spiked with four pollutants, which enabled high-throughput detection and the accuracies of 88.17–107.58% confirmed its applicability, in real sample analysis.

PVA/Stevia/MIL-88A@AuNPs composite nanofibers as a novel sorbent for simultaneous extraction of eight agricultural pesticides in food and vegetable samples followed by HPLC-UV analysis

Herein, an electrospun composite from poly(vinyl alcohol) (PVA) and Stevia extract as a cross-linked nanofibrous was prepared with incorporating Fe-metal organic framework@Au nanoparticles (MIL-88A@AuNPs). The final composite was characterized, and then used as an efficient sorbent in pipette-tip micro solid-phase extraction (PT-µSPE) of eight selected pesticides in food samples followed by HPLC-UV analysis. Under the opted conditions, the linearity was in the range of 1.0-1000.0 ng mL^-1 for atrazine and ametryn, 3.0-1500.0 ng mL^-1 for tribenuron-methyl, metribuzin, profenofos and chlorpyrifos, 5.0 to 1500.0 ng mL^-1 for phosalone, and 5.0-2000.0 ng mL^-1 for malation with coefficient of determination (r²) ≥ 0.9943. The LODs (based on S/N = 3) ranged from 0.3 to 1.5 ng m L^-1. The relative standard deviations (RSDs) were between 5.2% and 6.6% (intra-day, n = 5) and 5.9%-7.4% (inter-day, n = 3) for three consecutive days. Ultimately, the capability of the method in various food samples was appraised with good recoveries (79.3 to 97.6%).

Selective preconcentration separation of Hg(ii) and Cd(ii) from water, fish muscles, and cucumber samples using recycled aluminum adsorbents

Modified aluminum scrap waste was used in the selective extraction of Hg(ii), and Cd(ii) ions. The aluminum scraps were modified with dibenzoylmethane, or isatoic anhydride, or 5-(2-chloroacetamide)-2-hydroxybenzoic acid. The modified aluminum sorbents were characterized by FT-IR, SEM, XRD, XPS, TGA, and elemental analysis. Modes of chelation between adsorbents and target metal ions were deduced via DFT. The highest adsorption capacity was observed for benzo-amino aluminum (BAA) toward Hg(ii), which reached 234.56 mg g-1, while other modified sorbents ranged from 135.28 mg g-1 to 229.3 mg g-1. Under the optimized conditions, the BAA adsorbent showed a lower limit of detection (1.1 mg L-1) and limit of quantification (3.66 mg L-1) for mercury ions than other sorbents. The prepared aluminum adsorbents also exhibited significant selectivities for Hg(ii) and Cd(ii) ions in the presence of competing metal ions.

Mixed matrix of MOF@COF hybrids for enrichment and determination of phenoxy carboxylic acids in water and vegetables

A novel mixed matrix of MOF@COF hybrid was firstly formed by coating of hexahedral cage structure MOF with lightweight porous COF, and applied in dispersive solid-phase extraction of the phenoxy carboxylic acids (PCAs) from water and vegetable samples. Combined with liquid chromatography-tandem mass spectrometry, an excellent method with low limits of detection (0.69-1.79 ng·L^-1/0.002-0.006 ng·g^-1), good reproducibility (1.32%-7.02%/1.81%-6.71%), and excellent linearities (10-1000 ng·L^-1, R ≥ 0.9955/0.04-50 ng·g^-1, R ≥ 0.9966) was established. The adsorption mechanisms deduced that the π-π interaction, hydrophobic effects, hydrogen bond, and halogen bond may promote the excellent adsorption of the PCAs. Finally, the applicability of the method was verified by spiking four kinds of water and vegetable samples with PCAs, and satisfying recoveries were obtained (between 83.3% and 104.9%).

Magnetic solid-phase extraction based on zirconium-based metal-organic frameworks for simultaneous enantiomeric determination of eight chiral pesticides in water and fruit juices

A novel multi-residue method, magnetic solid-phase extraction combined with LC-MS/MS, was proposed for simultaneous enantiomeric determination of eight chiral pesticides in water and fruit juices. Fe₃O₄@C@UiO-66 was firstly used to extract and enrich pesticides, showing excellent adsorption capacity, which was proved by adsorption kinetic and thermodynamic experiments. Multiple extraction parameters were optimized by Plackett-Burman and Box-Behnken design. Under optimized conditions, good linearity (1.0-200 ng L^-1, R² ≥ 0.9953) for all analytes, detection limits (0.10 to 0.35 ng L^-1), quantitation limits (0.35 to 1.00 ng L^-1), recoveries (83.68-95.99%), and precision (intra-day RSD ≤ 7.06%, inter-day RSD ≤ 9.40%) were obtained, meeting the requirements of pesticides residues analysis. It is worth mentioning that eight chiral pesticides can be separated quickly within 19 min. The above results indicate that the proposed method with satisfactory sensitivity and accuracy has the potential for routine analysis of chiral pesticide residues in aqueous samples.