pH-responsive chitosan-based film incorporated with alizarin for intelligent packaging applications

Mechanical robust, pH responsive hemicellulose-based PVA film with barrier performance for fruit preservation and monitoring

Barrier films are essential for food packaging, but conventional solutions hinder the circular economy. This study introduces hemicellulose-based antioxidant crosslinked composite films as a sustainable alternative. We develop pH-responsive films (K-B/PVA/OA) using polyvinyl alcohol (PVA), silanized hemicellulose (KHC), blueberry anthocyanin (BA) as a pH indicator, and oxalic acid (OA) as a crosslinker. The films exhibit excellent oxygen and water vapor barrier properties and can be easily fabricated via solution casting with food-safe dispersions. The oxygen permeability (OP) decreases from 13.22 ± 0.65 × 10-14 to 3.24 ± 0.98 × 10-14 cm3·μm/(m2·d·Pa), and the water vapor permeability coefficient (Pv) drops from 15.43 ± 0.85 × 10-13 to 7.27 ± 0.46 × 10-13 g·cm/(cm2·s·Pa). Tensile strength and modulus increase from 32.63 MPa and 765.80 MPa to 41.24 MPa and 1281.39 MPa. Esterification between PVA and hemicellulose raises surface energy, increasing the contact angle from 39.4° to 78.34°. Strawberries packaged in these films maintain their structure and exhibit a visible color change after 7 days, offering sustainable, real-time monitoring packaging.

Multifunctional chitosan-based indicator films containing composite pigments stabilized by extracellular and cell wall polysaccharides from Auricularia cornea var. Li. waste for visualization of salmon freshness

Smart packaging can indicate the meat freshness through color variations of natural pigments within the films, whose instability have hindered their industrial application. This study developed multifunctional indicator films (CS-ACPS-CB) that possessed ultraviolet resistance, antioxidant properties, and pH sensitivity by incorporating extracellular and cell wall polysaccharides from Auricularia cornea var. Li waste (ACPS) into chitosan (CS) matrix with curcumin/betalain as indicators. Results revealed the extracellular component was acidic heteropolysaccharides, while the cell wall comprised glucose, mannose, xylose, rhamnose and galactaric acid. The electrostatic interactions and hydrogen bonding between cell wall polysaccharides and CS strongly stabilized composite pigments, allowing for controlled release at pH above 8.0. Additionally, CS-ACPS-CB demonstrated color changes corresponding to increases in total volatile basic nitrogen values, effectively signaling the progressive spoilage of salmon. These findings offer an environmentally friendly solution for utilizing Auricularia cornea var. Li waste and a sustainable application for ACPS in smart packaging materials.

A renewable thermochromic phase change material encapsulated within a wood-based cellulose/sodium methylsilicate framework

Thermochromic phase change material (TC) is a temperature-responsive heat storage material. However, few TCs are renewable. In the present study, a renewable TC (RTC) composed of alizarin, myristyl myristate, and 1-hexadecanol was synthesized, demonstrating a color shift between orange and orange-red during phase transitions. To maintain the shape stability, the RTC was encapsulated within a wood-based cellulose/sodium methylsilicate framework, termed thermochromic wood composite-smart material (TWC-SM). This framework altered the chemical structure of alizarin, resulting in a color shift between greyish-purple (L: 26 ± 1, a: 4 ± 1, b: -6 ± 1) and deep-purple (L: 14 ± 2, a: 1 ± 1, b: -3 ± 1) for TWC-SM during phase changes, indicating a distinct thermochromic mechanism compared to RTC. Specifically, TWC-SM appears greyish-purple below 52 °C, where the benzene ring of alizarin features two fixed O groups and an additional -OH group. At temperatures above 70 °C, it turns deep-purple as the -OH group loses a hydrogen ion. TWC-SM exerts a pronounced thermochromic effect, conferring temperature-responsive functionality. Moreover, the solid-liquid phase-changing enthalpy of RTC is 186.78 J/g, and the wood-based cellulose/sodium methylsilicate framework ensures the shape stability of RTC within TWC-SM. Consequently, the average temperature of TWC-SM is at least 5.56 °C higher than that of untreated wood over 60 min following identical thermal treatment. This finding shows the potential of the framework for practical applications in temperature-responsive heat storage materials. This study reveals the structure-activity relationship between RTC and the framework within TWC-SM, which is key to the development of practical applications of RTCs.

Smart Antibacterial Fabric Response to Sweat: Constructing Reversibly Switchable Surface by Zwitterionic Block Copolymers

Although various antibacterial fabrics have been extensively developed, smart antibacterial fabrics that can achieve stimulus responses have not been developed under high humidity conditions. In this study, a smart sweat-responsive antibacterial fabric has been designed by grafting zwitterionic PTMSPMA-co-PTMAO copolymer on cotton fabric (CF) to achieve "active attack" and "passive defense" against bacteria. It exhibits desirable antibacterial properties in both H2O and dry environments with the killing rates against Escherichia coli and Staphylococcus aureus reaching over 99.97%. Additionally, the fabric exhibits significant antiadhesion effects in sweat environments, with an antiadhesion rate above 99.95%. Various characterizations of PTMSPMA-co-PTMAO-CF reveal its smart responses in killing and antiadhesion of bacteria in high-humidity environments. In H2O, the oxygen-containing anions in PTMSPMA-co-PTMAO-CF interact with H2O via the hydrogen bond, exposing more -(CH3)2-N+ to kill the bacteria and enhance the "active attack." In sweat, ions (such as Na+ and Cl-) will be electrically neutralized with the quaternary ammonium cations (-(CH3)2-N+) and oxygen-containing anions in PTMSPMA-co-PTMAO-CF, thereby significantly enhancing the antiadhesion and exhibiting "passive defense" in high-humidity environments. PTMSPMA-co-PTMAO-CF can also achieve reversible conversion of killing and antiadhesion, according to variations in the external environments. This study provides new insight on smart antibacterial fabrics in the fields of health monitoring, sports equipment, and medical protection.

Development of κ-carrageenan/tourmaline composite for active food packaging applications: Improved mechanical, gas barrier, and antimicrobial

In order to solve the environmental pollution problems of traditional food packaging films, a kind of antibacterial packaging film based on κ-carrageenan and tourmaline powder was prepared. The addition of tourmaline powder as an inorganic filler improved the mechanical properties and gas barrier properties of κ-carrageenan films, and tourmaline had the function of spontaneously generating negative ions (NAIs) to give the film the antibacterial effect. With the increase in the amount of tourmaline powder, the water vapor permeability and oxygen permeability decrease, the water contact angle becomes larger, and the thermal degradation temperature increases. When the additional amount of tourmaline powder is 0.75 (%, w/v), the elongation at break and tensile strength can reach 39.356 % and 8.952 MPa. The κ-carrageenan/tourmaline composite film has an inhibitory effect on foodborne S. aureus, the best inhibition rate was obtained at 39.80 %. The weight loss of the figs packaged with this film is reduced, and the decay rate is slower. These results indicated that the κ-carrageenan/tourmaline composite film is promising in the food industry.

Enhanced ammonia-sensitive intelligent films based on a metal-organic framework for accurate shrimp freshness monitoring

Sensitive intelligent films can be used to accurately monitor food freshness. In this study, a cellulose acetate curcumin-loaded cyclodextrin (CD)-based metal-organic framework intelligent film (CA-Cur@CD-MOF) was developed to monitor shrimp freshness at different spoilage stages in real time. The mechanical, barrier, optical, and ammonia-sensitive properties of this film were studied. Notably, this film demonstrated effective ammonia-sensitive color development, reaching a ΔE value of 8.5 in 2 min under an ammonia atmosphere of approximately 0.4 mM. This intelligent film exhibits good DPPH free radical scavenging ability, high thermal stability, and excellent theoretical limit of detection (LOD). Interestingly, shrimp can be classified as "fresh", "sub-fresh", and "spoilage" during the monitoring of shrimp freshness. Furthermore, a significant correlation (R2 = 0.9641) was observed between the TVB-N and ΔE value for this film. Therefore, this intelligent film is promising for the real-time monitoring of freshness of shrimp and other protein-rich foods.

Preparation and characterization of chitosan / corn starch based films loaded with Vaccinium vitis-idaea anthocyanin nanocomplexes and the application in shrimp preservation

In this experiment, the nanocomposite film prepared by adding of nanocomplexes (ACNs-CHC/CMC-WPI) of Vaccinium vitis-idaea anthocyanins encapsulated with carboxymethyl chitosan (CMC), chitosan hydrochloride (CHC), and whey protein isolate (WPI) to chitosan/corn starch (CTS/Corn) blend matrix for food packaging. The functionality and stability of anthocyanin-loaded nanocomplexes and anthocyanin-containing films were determined and compared. Good encapsulation was observed by transmission electron microscopy. The freshness preservation effect of the prepared films on shrimp was investigated. Scanning electron microscopy results showed that ACNs-CHC/CMC-WPI was uniformly dispersed in chitosan-corn starch matrix, indicating the formation of a stable CTS/Corn-anthocyanin nanocomplex film (CTS/Corn-AN film). Although CTS/Corn-free anthocyanin (CTS/Corn-FA film) had better antioxidant activity in the short term, the CTS/Corn-AN film could better maintain the antioxidant activity and original color after 28 days of light exposure. In summary, the CTS/Corn-AN film possessed better mechanical property with elongation at break at 88.67 %, oxidation resistance with DPPH scavenging of 28.71 % at 28th, and other physicochemical properties than those of the CTS/Corn-FA film. Finally, the CTS/Corn-AN film showed effective freshness preservation of shrimp at 4 °C for 10 days compared to the control group due to durable antibacterial and antioxidant properties. Therefore, CTS/Corn-AN film was promising active packaging material in shrimp preservation.

Emerging chitosan systems incorporated with polyphenols: Their applications in intelligent packaging, active packaging, and nutraceutical systems - A comprehensive review

Chitosan, a biodegradable anionic polysaccharide, has been increasingly investigated for food packaging and nutraceutical applications. In recent years, chitosan has been combined with polyphenols, a group of health promoting bioactive compounds, to enhance their physicochemical, functional, and biological properties. The synergistic functional attributes of chitosan and polyphenols have led to the development of several novel food packaging materials and nutraceuticals. Despite, several investigations being conducted on chitosan-polyphenol materials (e.g., films, coating, nanoparticles, complexes, emulsion gels), currently there is a lack of studies that comprehensively evaluate the combined effect of chitosan and polyphenol in development of both food packaging materials and nutraceuticals. Therefore, in this review, novel packaging materials and nutraceuticals developed employing chitosan-polyphenol in recent years (2018-2024) are thoroughly investigated. This review initiates with the source, production strategies, and techniques employed to improve the functionality of chitosan. Secondly, the findings associated with important intelligent packaging materials, including pH indicator, time-temperature indicator, and freshness indicator, developed using chitosan-polyphenol is investigated. Following that, the applications of chitosan-polyphenol materials in active food packaging (i.e., antimicrobial, antioxidant, oxygen scavenger, ethylene scavenger, and moisture scavenger) are explored. Notably, chitosan-based delivery systems that are employed to improve the chemical stability, bioaccessibility, and biological properties of polyphenols for nutraceutical applications are summarized. Finally, the challenges associated with the industrial application of chitosan-polyphenol materials are addressed. Overall, this review would benefit a wide range of scientists from food packaging to ingredient sectors by providing the current knowledge associated with chitosan-polyphenol materials.

Development of pH-responsive active intelligent chitosan film incorporated with pomegranate cellulose nanocrystals and curcumin nanoparticles

Casein Sodium coated curcumin nanocapsules (Cas@Cur) were fabricated by a pH shift method, which improved the water solubility of curcumin (Cur). Hydrogen bonds and hydrophobic interactions were the main forces for the formation of Cas@Cur. Chitosan films (CS) reinforced with pomegranate cellulose nanocrystals (PCNCs), Cas@Cur, PCNC/Cas@Cur, and PCNC/Cur were developed and named CP, CS-Cas@Cur, CP-Cas@Cur and CP-Cur, respectively. The addition of Cas@Cur decreased the moisture content, crystallinity and water contact angle of chitosan film, and increased its water solubility and light barrier property. The CP-Cur film presented the roughest cross-sectional SEM image owing to the hydrophobicity of Cur. CP-Cas@Cur film exhibited the excellent cumulative release of Cur, and was 1.60 and 3.70 times of that of CP-Cur in the semi-fatty and fatty food simulation systems at 2 h, respectively, owing to the controlled-release function of PCNCs and great water solubility of Cas@Cur. Furthermore, the CP-Cas@Cur film displayed excellent antioxidant property, antibacterial activity and sensitive color responsiveness to pH and NH3. Interestingly, the CP-Cas@Cur films exhibited a visible color change at pH 3-7. The application of CP-Cas@Cur film in the preservation of milk and shrimp indicated its potential for the visual monitoring of food freshness.

Recent Advances in Polysaccharide-Based Nanocomposite Films for Fruit Preservation: Construction, Applications, and Challenges

With the constantly escalating demand for safe food packaging, the utilization of biodegradable polysaccharide-based nanocomposite films is being explored as an alternative to traditional petrochemical polymer films (polyvinyl alcohol, polybutylene succinate, etc.). Polysaccharide-based films have excellent mechanical properties, water vapor transmission rates, and other physical characteristics. Films can fulfill numerous demands for fruit packaging in daily life. Additionally, they can be loaded with various types of non-toxic and non-biocidal materials such as bioactive substances and metal nanomaterials. These materials enhance bacterial inhibition and reduce oxidation in fruits while maintaining fundamental packaging functionality. The article discusses the design and preparation strategies of polysaccharide-based nanocomposite films and their application in fruit preservation. The types of films, the addition of materials, and their mechanisms of action are further discussed. In addition, this research is crucial for fruit preservation efforts and for the preparation of polysaccharide-based films in both scientific research and industrial applications.

An intelligent aerogel composed of anthocyanins, natural fiber, carboxymethyl cellulose, and sodium alginate for monitoring fish freshness

This study aimed to develop a natural colorimetric aerogel based on carboxymethyl cellulose (CMC), sodium alginate (SA), black goji anthocyanin (BGA), and various natural fibers such as cotton fiber (CF), silk fiber (SF), and down fiber (DF) via a combined approach of ionic gelation and freeze drying for monitoring fish freshness. Various colorimetric aerogels, (CMC/SA, CMC/SA/CF, CMC/SA/SF, and CMC/SA/DF) were developed and analyzed. Among them, CMC/SA aerogel showed higher density (0.054 g/cm3) with no surface pores, while CMC/SA/SF had a large surface area (18.6214 m2/g) with uniformly higher porosity (97.11 %) and a lower density (0.024 g/cm3). Moreover, the CMC/SA/SF aerogel exhibited greater mechanical properties and color sensitivity at various pH compared to other aerogels, which was then used as an indicator label for monitoring fish freshness during storage at 4 °C and 25 °C. The label aerogel became blue from purple, when the values of TVB-N, TVC, and pH reached 32.92 and 26.91 mg/100 g, 9.41 × 107 and 8.7 × 107 CFU/g, and 6.99 and 7.15 at 4 and 25 °C, respectively, exhibiting the level of fish deterioration. Taken together, the CMC/SA/SF colorimetric aerogel shows great potential for application as an intelligent package in monitoring the freshness of fish.

Fast production of highly sensitive nanotextured nonwovens for detection of volatile amines, bacterial growth, and pH monitoring: New tools for real-time food quality monitoring

An efficient manufacturing of colorimetric nonwoven indicators represents a promising alternative to enable applications of such materials in food quality monitoring. The objective of this study is to use the solution blow spinning technique (SBS) to rapidly produce colorimetric nonwoven indicators based on polycaprolactone, incorporating natural or synthetic pH indicators to detect volatile amines, bacterial growth and monitor pH. Produced via the SBS method, these indicators were characterized aiming their physical, mechanical, thermal, and spectroscopic properties, evaluating their efficacy in detecting amines, monitoring bacterial growth, and pH, as well as assessing color stability during storage. The thermal stability and mechanical properties of the nonwovens practically always increased with the incorporation of natural and synthetic indicators. When exposed to volatile amines, the nonwoven indicators, particularly those embedded with bromophenol blue, displayed remarkable color change abilities in the presence of five volatile amines. These smart nonwovens in direct contact with E. coli K-12 or its volatiles in 24 h changed their color perceptible to the naked eye. The nanofiber nonwovens displayed visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10). The smart nonwovens rapidly produced by the solution blow spinning method prove to be a promising tool for real-time monitoring of food freshness.

Smart pH-sensitive indicators based on rice starch/pectin/alginate loading Lambrusco pomace extract and curcumin to track the freshness of pink shrimps

This research is focused on the formulation and testing of green visual pH-sensitive indicators based on natural extracts from Curcuma Longa (CUR) and Lambrusco wine pomace (LAM), an Italian wine variety, incorporated into rice starch/pectin/alginate matrixes for non-destructively detecting shrimps freshness in real-time. The effect of the mixed indicators and their synergic combination on the properties and performances of indicators was investigated. Both the extracts and their combination showed pronounced pH responsiveness. Films were widely characterized in terms of morphological, barrier, spectroscopic, thermal and mechanical properties. The presence of extracts slightly reduced the transparency of the films while the film with both the extracts exhibited the highest Young's modulus (14.17 MPa), lowest moisture content (27.67 %) and a WVP value (0.79 g m m-2 s-1 Pa-1) intermediate between the Lambrusco extract loaded film and the curcumin based one. Moreover, the pH-sensitive systems showed a noticeable antioxidant activity (96 % for LAM/CUR film) and enhanced antibacterial activity toward E. coli and S. aureus compared to pristine films. Besides, the mixed indicator-based film showed high sensitivity to ammonia (68 %) determining an ΔE value easily detectable by the human eye. Finally, the films were applied as cheap visual indicators for monitoring the freshness of packaged fresh shrimps over time stored at T = 4 °C and T = 25 °C through the colourimetric variation induced by pH changes. The TVB-N value, which was correlated to the microbial count for shrimps over time, reached the rejection limit at 33 h for T = 25 °C and 54 h for T = 4 °C. The colour changes were recorded simultaneously and the turning to deeper colours indicated the decomposition of proteins to organic amines and the spoilage of food. Results show that the produced films provide easily detectable colour changes during food spoilage proving that, being fabricated from natural sources, they represent novel and sustainable tools for multi-purpose intelligent food packaging applications.

Active packaging film based on chitosan/gelatin blend incorporated with mango peel carbon dots: Properties and shelf life extension of minced pork

Active packaging is essential for reducing food quality loss and ensuring consumer safety. Recently, carbon dots, synthesized from agricultural bio-wastes, have been used as active nanofillers. Mango peels, generally discarded as waste, can serve as potential precursor for synthesis of carbon dots. Mango peel carbon dots (MPCD) were prepared and characterized. Characteristics of active film based on chitosan (CS)/fish gelatin (FG) blend incorporated with MPCD at different concentrations (1, 3, and 5 wt%) were investigated. MPCD with augmenting concentrations enhanced mechanical properties of CS/FG film. Film containing 5 % MPCD had 15 % higher tensile strength than the control (without MPCD). The film containing MPCD showed the improved antioxidant activity, antimicrobial and UV barrier properties. The pouch (5 × 5 cm2) made from film added with 5 % MPCD via heat sealing was used for packaging minced pork. Minced pork packed in the pouch showed lower bacterial growth (below 6 log CFU/g) and chemical changes than that packed in polyethylene pouch during 15 days of storage at 4 °C. Therefore, the conversion of mango peel into valuable carbon dots promotes a zero-waste sustainable approach in line with the biocircular economy. Active pouch could be employed as novel biodegradable active and green packaging for the food industry.

Functional pH-sensitive film based on pectin and whey protein for grape preservation and shrimp freshness monitoring

A pH-sensitive film was prepared from pectin (P) and whey protein (W), incorporating anthocyanin-rich purple sweet potato extract (PPE) as the pH indicator. The effect of PPE content on the structure and properties of the films and the pH indicating function were determined and evaluated for shrimp freshness and grape preservation. The solubility (60.23 ± 7.36 %) and water vapor permeability (0.15 ± 0.04 × 10-11 g·cm/(cm2·s·Pa)) of the pectin/whey protein/PPE (PW-PPE) film with 500 mg/100 mL PPE were the lowest of the films tested and much lower than PW films without PPE. PW-PPE films were non-cytotoxic and had excellent biodegradability in soil. Grapes coated with PW-PPE film had reduced weight loss from water evaporation, and decay during storage was inhibited. The total color change (ΔE) of the PW-PPE films had a strong linear correlation with the pH of shrimps during storage. PW-PPE films have application potential to monitor the real-time freshness of meat and extend the shelf life of fruit.

Development and characterization of a double-layer smart packaging system consisting of polyvinyl alcohol electrospun nanofibers and gelatin film for fish fillet

This study aimed to develop a double-layer film composed of an intelligent, gelatin-based film integrated with active polyvinyl alcohol electrospun nanofibers (PVANFs). Eggplant skin extract (ESE), a colorimetric indicator, was incorporated into the gelatin-based film at varying concentrations ranging from 0 % to 8 % w/w. The gelatin film containing 8 % ESE was identified as the optimal formulation based on its superior color indication, water barrier, and mechanical properties. Savory essential oil (SEO)-loaded PVANFs were electrospun onto the optimized gelatin film to fabricate the double-layer film. Analysis of the chemical and crystalline structures and the double-layer film's thermal properties confirmed the gelatin film's physical integration with PVANFs. Morphological examination revealed a smooth surface on the film and a uniform fibrillar structure within the PVANFs. Furthermore, the developed double-layer film effectively detected spoilage in trout fish while controlling pH, oxidation, and microbial changes during storage.

Photodynamic inactivation mediated by natural alizarin on bacteria for the safety of fresh-cut apples

Most photosensitizers have limited responsiveness to visible light, however, visible light is a light source with a wide range of wavelengths and the most common in daily life, and making full use of visible light can help to enhance the photodynamic antimicrobial properties of photosensitizers. To tackle this issue, this study confirmed that alizarin has a good absorption capacity for visible light by UV-DRS analysis. Theoretical calculations showed that alizarin might be excited through the charge transfer (CT) mechanism. Under simulated light conditions, alizarin exhibited significant photodynamic inactivation, with a bactericidal efficiency of 99.91 % against S. aureus and L. monocytogenes within 40 min. Meanwhile, the cytolytic rate of alizarin was less than 5 % and the free radical scavenging rate was more than 90 %. To improve the freshness of fresh-cut fruits, we prepared alizarin-pectin (Ali-Pec) coatings using a one-step synthesis method. FT-IR spectroscopic showed the possible presence of hydrogen bonding. It was further found that during storage, the coating-treated fresh-cut apples in the experimental group showed an 8 % reduction in the variation of L-value and a 50 % reduction in the variation of a*-value, and effectively maintained the pH, VC, PPO, and T-AOC levels of the fresh-cut apples, which prolonged the shelf-life of the fresh-cut apples.

Starch-pectin smart tag containing purple carrot peel anthocyanins as a potential indicator of analogous meat freshness

Smart films of starch/pectin and purple carrot peel (PCP) containing anthocyanins were developed, characterized, and used as pH-responsive tags to monitor plant-based chicken analogous. This study innovates by incorporating PCP in the film solution both as an extract and as a powder, and the resulting tags were applied to a plant-based food. PCP powder <100-mesh was directly incorporated into the film-forming suspension. For powder >100-mesh, two extracts were tested: an aqueous solution and a 1 % NADES solution added to the film-forming suspension. Quantification of PCP anthocyanins by HPLC showed a higher extraction under acidic conditions (1664 mg C3G equivalents 100 g-1). Films with PCP presented greater light protection. Films with 15 % and 25 % PCP and those with added extract showed better tensile strength (3.0-3.6 MPa), elongation at break (16-20 %) and a water contact angle of 52°. All films responded to pH variations (1 to 14) and ammonia vapor and showed ΔE* values >5. After 3 days, films used as smart tags monitoring chicken analogous presented noticeable color differences for PCPNADES (55 ± 8) and 15%PCP (40 ± 1). PCP showed strong potential as a pigmenting agent in films, especially as an aqueous extract with NADES for use as pH-responsive tags in chicken analogous.

Incorporating functional colorants in whey protein isolate-cellulose nanocrystal-blended edible films for pork freshness prediction

In this study, intelligent pH- and ammonia-sensing edible films are designed based on whey protein isolate (WPI)-cellulose nanocrystal-based biopolymers by incorporating different functional colorants (curcumin, phycocyanin, and modified lycopene), alone and paired, to promote food freshness and monitoring efforts. Incorporating the colorants endowed the films were endowed with pH- and ammonia-responsiveness and enhanced UV-blocking, antioxidant, and antibacterial capabilities. Phycocyanin induces WPI unfolding, increasing the accessibility of curcumin; hence, combining curcumin with phycocyanin promotes the sensitivity of films to pH and NH3 compared with those containing a single colorant. In the pork freshness monitoring analysis, the combined-colorants film underwent a noticeable color change as the meat spoiled. Moreover, the meat packaged with the combined film exhibited lower levels of lipid oxidation than those packaged in single-colorant films. These results suggest that curcumin-phycocyanin-containing films have multifunctional potential in intelligent food packaging.

Pineapple stem starch-based films incorporated with pineapple leaf carbon dots as functional filler for active food packaging applications

Pineapple leaf waste, a byproduct of agricultural processes, was used as a novel raw material to synthesize carbon dots (CDs) through a simple hydrothermal method. The CDs were subsequently incorporated into pineapple stem starch (PSS)-based active food packaging films. The characterization of the CDs and PSS-CDs films was conducted using various techniques, including UV-light spectroscopy, fluorescence spectroscopy, and transmission electron microscopy. The results revealed that the CDs measured 2.36 ± 0.33 nm and exhibited antioxidant and antibacterial activities. The addition of the CDs led to notable enhancements in both mechanical strength and UV-barrier properties. Thus, PSS-CDs packaging film was successfully prepared, with the incorporation of CDs enhancing the antioxidant and antimicrobial properties of the film, thereby extending the shelf-life of fresh pork.

Preparation and characterization of κ-carrageenan/dextran films blended with nano-ZnO and anthocyanin for intelligent food packaging

The κ-carrageenan/microbial-originated dextran-based multifunctional intelligent packaging films, integrated with natural anthocyanins as a colorant and ZnO as an antibacterial agent, were successfully developed using a casting method. Their applicability and functionality were systematically assessed through various analytical techniques. The addition of dextran, anthocyanins, and ZnO in the films resulted in an increased tensile strength (from 13.66 ± 0.53 to 29.70 ± 1.29 MPa) and elongation at break (from 16.69 ± 1.05 % to 39.49 ± 0.73 %), and decreased water solubility (from 64.94 ± 0.34 % to 32.84 ± 1.55 %) and water vapor barrier property (from 8.29 ± 0.12 × 10-10 g/m•s•Pa to 6.92 ± 0.1 × 10-10 g/m•s•Pa). Spectroscopic analysis revealed that the dextran, ZnO and anthocyanins were uniformly dispersed within the film-forming substrates, achieved through hydrogen bonds and electrostatic interactions. The addition of anthocyanins and ZnO not only enhanced the antibacterial and antioxidant properties of the film but also provided it with good pH sensitivity and color stability, making it highly promising for use in shrimp freshness monitoring. All the films were shown to be biodegradable, decomposing completely in soil within 30 days. Overall, these results suggest that the films could serve as a potential replacement for plastic food packaging and additionally monitor the freshness of food.

Blueberry extract loaded into rice milk/alginate-based hydrogels as pH-sensitive systems to monitor the freshness of minced chicken

Hydrogel beads from rice milk and blueberry (BB) skins were fabricated as novel bio-based pH-sensitive devices. The encapsulation of BB into rice milk/alginate beads was achieved through a simple methodology. The colourimetric response of beads in different pH media was evaluated along with the proof of reusability, showing appropriate reversibility. The evaluation of the stability of BB-loaded beads in accelerated ageing conditions (4, 25 and 40 °C and under visible/UV light) showed high stability of beads (up to 28 days) even in the presence of harsh conditions. The half-time of cyanidin-3-glucoside decreases at high temperatures and under UV light exposure. The sensitivity to ammonia (NH3) and trimethylamine (TMA), as main spoilage volatiles of protein food products, was evaluated. The detection limits (LOD) for NH3 and TMA were 22.4 ppm and 72.1 ppm, respectively. Finally, the hydrogel beads were applied to monitor the spoilage of minced chicken breast. The colour of the beads, changing from dark reddish to green/yellowish and indicative of a high level of amine, could be detected by the naked eye after 3-5 days. This research proposes a sustainable, low-cost, and simple method to fabricate BB-loaded hydrogel beads as a promising tool for intelligent packaging applications.

The latest research progress on polysaccharides-based biosensors for food packaging: A review

In recent years, polysaccharide-based biosensors have emerged as promising technologies for intelligent food packaging, offering innovative solutions to enhance food quality and safety. This review highlights advancements in designing, developing, and applying these biosensors, particularly those utilizing polysaccharides such as chitosan, cellulose and alginate. Engineered with nanomaterials like ZnO, silver, and carbon nano-tubes demonstrated high sensitivity in real-time monitoring of food spoilage indicators, including pH changes, volatile nitrogen compounds and microbial activity. We discuss the electrochemical properties of these biosensors, highlighting how the integration of electrochemical methods significantly improves their detection capabilities within packaging environments, leading to sensor sensitivity enhancement, greater accuracy, and spoilage detection, ultimately extending the shelf life of perishable food products. Additionally, the review addresses the practical challenges of industrial implementation and explores future research directions for optimizing sensor functionality and scalability. The findings underscore the potential of polysaccharide-based intelligent packaging as a sustainable and effective alternative to conventional methods, paving the way for broader commercial adoption.

Advances in biomaterials based food packaging systems: Current status and the way forward

World hunger is getting worse, while one-third of food produced around the globe is wasted and never consumed. It is vital to reduce food waste to promote the sustainability of food systems, and improved food packaging solutions can augment this effort. The utilization of biomaterials in smart food packaging not only enhances food preservation and safety but also aligns with current demands for eco-friendly technologies to mitigate the impacts of climate change. This review provides a comprehensive overview of the developments in the field of food packaging based on the innovative use of biomaterials. It emphasizes the potential use of biomaterials derived from nature including cellulose, chitosan, keratin, etc. for this purpose. Various smart food packaging technologies such as active and intelligent packaging are discussed in detail including scavenging additives, colour-changing environment indicators, sensors, RFID tags, etc. The article also delves into the utilization of edible films and coatings, nanoparticle fillers and 2D materials in food packaging systems. Furthermore, it outlines the challenges and opportunities in this dynamic domain, emphasizing the ongoing need for research and innovation to shape the future of sustainable and smart food packaging solutions to enhance and monitor the shelf-life of food products.

Fast and sustainable production of smart nanofiber mats by solution blow spinning for food quality monitoring: Potential of polycaprolactone and agri-food residue-derived anthocyanins

The shelf life of perishable foods is estimated through expensive and imprecise analyses that do not account for improper storage. Smart packaging, obtained by agile manufacturing of nanofibers functionalized with natural pigments from agri-food residues, presents promising potential for real-time food quality monitoring. This study employed the solution blow spinning (SBS) technique for the rapid production of smart nanofiber mats based on polycaprolactone (PCL), incorporating extracts of agricultural residues rich in anthocyanins from eggplant (EE) or purple cabbage (CE) for monitoring food quality. The addition of EE or CE to the PCL matrix increased the viscosity of the solution and the diameter of the nanofibers from 156 nm to 261-370 nm. The addition of extracts also improved the mechanical and water-related properties of the nanofibers, although it reduced the thermal stability. Attenuated total reflectance Fourier-transform infrared spectroscopy confirmed the incorporation of anthocyanins into PCL nanofibers. Nanofiber mats incorporated with EE or CE exhibited visible color changes (ΔE ≥ 3) in response to buffer solutions (pH between 3 and 10), and ammonia vapor. Smart nanofibers have demonstrated the ability to monitor fish fillet spoilage through visible color changes (ΔE ≥ 3) during storage. Consequently, smart nanofibers produced by the SBS technique, using PCL and anthocyanins from agro-industrial waste, reveal potential as smart packaging materials for food.

Characterization and performance evaluation of colorimetric pH-sensitive indicator based on Ҡ-carrageenan/quince seed mucilage hydrogel as freshness/spoilage monitoring of rainbow trout fillet

The aim of research was to fabricate a novel indicator by using κ-carrageenan and quince seed mucilage (QSM) hydrogels and red cabbage anthocyanin. The porosity of the hydrogel was controlled using different ratios of κ-carrageenan(C):QSM(Q) (C90:Q10, C70:Q30, and C50:Q50). The hardness of hydrogels decreased from 28.6 ± 0.3 N for C90Q10 to 11.0 ± 1.0 N for C50Q50 sample. However, according to field emission scanning electron microscopy (FE-SEM) analysis, the C50R50 sample had the best morphology with smooth surface and uniform interconnected porous network. Hydrogen bonding interactions among anthocyanins, QSM, and κ-carrageenan were confirmed by Fourier transforms infrared (FT-IR) spectroscopy. The indicator showed a color variation from red to yellow over the pH range of 2-12. Also, the indicator exhibited high sensitivity to ammonia vapors (SRGB = 115%) and good color stability. The C50QRA indicator was used for monitoring rainbow trout fillet spoilage and revealed a visually-detectable color change from red to green upon detecting total volatile basic nitrogen (TVB-N) content produced throughout storage at 4 °C. Generally, the halochromic hydrogel developed in this research can be suggested as a more sensitive and accurate freshness indicator than conventional indicator solid supports.

A Highly CO2-Sensitive Wood-Based Smart Tag for Strawberry Freshness Monitoring

Smart tags are used for monitoring the freshness of foods. However, they often lack significant color changes, and their accuracy needs to be improved. In this study, a poplar veneer with a natural pore structure was selected as a matrix to prepare a smart tag with high pH sensitivity for tracking the freshness of strawberries. The delignified veneer was modified using 2,3-epoxypropyltrimethylammonium chloride (EPTAC) to be given positive charges to adsorb bromothymol blue (BTB) through electrostatic interactions. The adsorption capacity of the veneer reached 7.0 mg/g at 50 °C for 4 h, and the veneer showed an obvious blue color. The smart tags exhibited distinct color changes at different pHs and showed quick color changes in response to acetic acid. As the freshness of strawberries decreased, the color of the smart tags changed from blue to yellow-green, which indicated that the accuracy was high. In this study, an effective method was fabricated to prepare a highly sensitive tag, promoting popular application to ensure food quality.

Full life cycle green preparation of collagen-based food packaging films using Halocynthia roretzi as raw material

The extraction of collagen for packaging films typically requires a time-consuming process and the use of substantial chemicals. Herein, we present a full life cycle green preparation method for rapidly producing collagen-based food packaging films using Halocynthia roretzi (HR), a collagen-rich marine organism, as raw material. We first prepared the micro/nano-sized collagen fibers from HR tissue by utilizing urea and sonication as effective hydrogen-bond breakers. Subsequently, the collagen fiber was rapidly fabricated into a film through vacuum filtration. The resulting collagen fiber film (CFF) exhibited a uniform and dense surface, along with good tensile properties, water resistance, and biodegradability. In addition, the deposition of chitosan (CS) on the surface of CFF resulted in a remarkable preservation effect for both strawberries and pork. This full life cycle preparation method for collagen-based films provides a promising and innovative approach to the sustainable preparation of food packaging films.

Starch-chitosan-Taro mucilage nanocomposite active food packaging film doped with zinc oxide nanoparticles - Fabrication, mechanical properties, anti-bacterial activity and eco toxicity assessment

In this research, a novel active food packaging material was developed by blending starch, chitosan, and plant-based mucilage with zinc oxide nanoparticles. The polymeric nanocomposite film, created by incorporating zinc oxide nanoparticles into the mixture using a straightforward approach, was analyzed for its structural and functional attributes using FTIR, XRD, SEM, and TGA/DSC. These analyses revealed a robust interaction between the polymers' functional groups and the nanoparticles, forming a stable film. The film's mechanical properties, including tensile strength and Young's modulus, were high. It also showed reduced wettability and water solubility, enhancing water resistance. The biodegradability rate was 100 %. Antibacterial tests against Bacillus sp. and Pseudomonas sp. showed significant inhibition zones of 26 mm and 30 mm, respectively, demonstrating strong antibacterial effectiveness. The film's non-target toxicity was assessed through phytotoxicity experiments on Vigna angularis and soil nutrient evaluations, with no negative impact on plant growth or soil health observed. These results indicate that this nanocomposite is a safe, biocompatible option for food packaging.

The Use of Novel Colorimetric Films to Monitor the Freshness of Pork, Utilizing Konjac Glucomannan With Curcumin/Alizarin

In this study, different proportions of curcumin (CUR) and alizarin (ALI) were added to konjac glucomannan (KG)/ polyvinyl alcohol (PVA) to prepare an active intelligent packaging film and evaluate its potential to indicate pork freshness. The mixed indicator had a richer color hierarchy in the buffer solution with pH = 2-12. The surface of the KG-2C2A and KG-1C3A films is smoother and has fewer cross-section faults. With the increase of CUR content in the film, the crystal structure becomes more prominent, leading to poor compatibility with KG. The WAC of KG-3C1A and KG-1C3A films was significantly higher than that of the other groups, and they had better hydrophobicity. With the increase of CUR content in the films, the thermal stability of the films was enhanced, and the KG-C films showed the highest thermal stability. Among them, the KG-2A2C and KG-1C3A films showed the most significant color change during pork spoiling and could be used to monitor the freshness of pork. As a pH colorimetric indicator, CUR and ALI-coated KG films might be of great potential in fresh meat monitoring.

Development of polysaccharide based intelligent packaging system for visually monitoring of food freshness

With the increased awareness on food freshness and food quality among consumers, the intelligent packaging films that can visually monitor the freshness of packaged foods by observing the color changes of packaging materials are gradually drawing more and more attentions. In this paper, various colorimetric indicators, types of polysaccharides as film-forming materials, production methods, freshness monitoring application, along with the future development of different intelligent packaging films are illustrated detailedly and deeply. Natural pH sensitive indicators such as anthocyanin, alizarin, curcumin, betaines and chlorophylls, as well as the gases sensitive indicators (hydrogen sulfide sensitive indicators and ethylene sensitive indicators) are the most widely used indicators for monitoring of food freshness. By incorporating different colorimetric indicators into polysaccharides (starch, chitosan, gum and cellulose derivatives) based substrates, the intelligent packaging films can be fabricated by solvent casting method, extrusion-blow molding method and electrospinning technique for monitoring of meat products, fruits, vegetables, milk products and other food products. In conclusion, intelligent packaging films with colorimetric functions are promising and feasible methods for real-time monitoring of food freshness, while stable colorimetric indicators, new film-forming methods and cheaper polysaccharide materials are still needed to develop for further commercialization.

Development and characterization of polyvinyl alcohol/chitosan crosslinked malic acid composite films with curcumin encapsulated in β-cyclodextrin for food packaging application

Considering that fruits are vulnerable to damage and waste during stockpiling, transport and marketing. Given this, an innovative curcumin inclusion compound (Cur@β-CD) was devised in this study to introduce oil-soluble curcumin (Cur) into water-soluble polyvinyl alcohol (PVA) materials, thereby fabricating food packaging films endowed with excellent properties. DPPH test manifested that the oxidation resistance for PCOMC-Cur@β-CD film was 95 % above PVA material. It was ascribed to the fact that the Cur@β-CD elevated the water solubility of Cur while the increase of water solubility heightened the antioxidant effect for Cur in the film. Additionally, the chitosan (CS) was crosslinked with malic acid (MA), which elevated the barrier property of the film, reduced the amount of oxygen transmission and further retarded the oxidation reaction of the fruits for packaging. The antibacterial test demonstrated that the antibacterial rates of PCOMC-Cur@β-CD film against E. coli and S. aureus reached 92 % and 95 %, respectively, which was attributed to the slow release of Cur when Cur@β-CD was dissolved in PVA material and the Schiff base reaction between Cur and amino groups on CS. These findings indicate that the PCOMC-Cur@β-CD film developed in this work can provide certain insights into the field of food packaging.

pH-triggered bilayer film based on carboxymethyl cellulose/zein/Eudragit L100 with purple cabbage anthocyanin for monitoring pork freshness

A novel pH-triggered bilayer film was composed of zein (Z), carboxymethylcellulose (CMC), Eudragit L100 (L100), and purple cabbage anthocyanin (PCA), followed by casting for monitoring pork freshness during storage at 4 °C and 25 °C. This bilayer film was employed to encapsulate anthocyanins, preventing anthocyanins oxidation and photodegradation. Additionally, under pH 6, this film ruptures and releases anthocyanins, inducing a sudden color change in the indicator film, significantly reducing errors in freshness indications. Notably, the ZCLP8% film had excellent stability and pH response properties. The performance of the ZCLP8% film in monitoring pork freshness was evaluated. When the concentration of pork TVB-N reached 15.59 mg/100 g (pH = 6.35), the bilayer film was ruptured, and the release rate of PCA was 85.52 %, which was a significant change in the color of the bilayer film compared with that at pH = 5. Therefore, this work addresses the limitation that anthocyanin-based intelligent films are subject to judgment errors when applied, opening new possibilities for food freshness differentiation monitoring.

An antibacterial film using κ-carrageenan loaded with benzyl isothiocyanate nanoemulsion: Characterization and application in beef preservation

Benzyl isothiocyanate (BITC) is a naturally active bacteriostatic substance and κ-carrageenan (KC) is a good film-forming substrate. In the present study, a nanoemulsion incorporating BITC was fabricated with a particle size of 224.1 nm and an encapsulation efficiency of 69.2 %. Subsequently, the acquired BITC nanoemulsion (BITC-NE) was incorporated into the KC-based film, and the light transmittance of the prepared composite films was lower than that of the pure KC film. Fourier transform infrared spectroscopy and scanning electron microscopy revealed that BITC-NE was compatible with the KC matrix. BITC-NE incorporation enhanced the tensile strength of the KC-based films by 33.7 %, decreased the elongation at break by 33.8 %, decreased the water vapor permeability by 60.1 %, increased the maximum thermal degradation temperature by 48.8 %, and decreased the oxygen permeability by 42 % (p < 0.05). Furthermore, the composite films showed enhanced antimicrobial activity against Staphylococcus aureus, Salmonella typhimurium, and Pseudomonas fluorescens. The developed KC-based composite films were applied to wrap raw beef, which significantly delayed the increase in total viable count, total volatile base nitrogen content, and thiobarbituric acid reactive substances, and prolonged the shelf-life of the raw beef by up to 10 days. These results indicated that the composite films prepared by incorporating BITC nanoemulsions into KC matrices have great antimicrobial application potential.

Construction of Smart Coatings Containing Core-Shell Nanofibers with Self-Healing and Active Corrosion Protection

With increasingly severe metal corrosion, coating preparation with high-performance corrosion protection has attracted more attention. Herein, the encapsulation of the corrosion inhibitor 8-hydroxyquinoline (8-HQ) as well as the self-healing agent linseed oil (LO) in polyvinyl alcohol (PVA) and chitosan (CS) shells were realized by coaxial electrospinning, which was recorded as PVA/CS@LO/8-HQ core-shell nanofibers. PVA/CS@LO/8-HQ nanofibers were employed to promote the high-performance corrosion protection of the epoxy coating. The anticorrosion mechanism was that the change of the local pH on the metal surface stimulated the release of 8-HQ from the nanofibers, which were then chelated with iron ions to form a complex. When cracks occurred and caused rupture of the nanofibers, LO was released and reacted with oxygen to cure them so that the cracks could be healed autonomously. The dynamic potential polarization curves showed that the corrosion inhibition efficiency of the compound inhibitor LO + 8-HQ reached 87.54%, 90.31%, and 85.57% at pH = 3, 7, and 11, respectively, higher than that of the single corrosion inhibitor. Density functional theory calculations revealed that the LO and 8-HQ combination, forming a hydrogen bond interaction, promoted the adsorption of inhibitors on the steel surface. Scanning Kelvin probe and electrochemical impedance spectroscopy proved the self-healing corrosion protection properties of the epoxy coating. These results demonstrated that embedding PVA/CS@LO/8-HQ nanofibers in the coating could obtain self-healing properties, and promote the mechanical and corrosion protection of epoxy coating.

Preserving plum perfection: Buckwheat starch edible coating with xanthan gum and lemongrass essential oil

The research focused on the fabrication of composite coatings using buckwheat starch (BS) and xanthan gum (XG) with incorporation of lemongrass (Cymbopogon citratus) essential oil (LEO) with varying concentration (0.75 %, 1.0 % and 1.25 % (w/v). BS was extracted from buckwheat groats (Fagopyrum esculentum) and its physico-chemical characteristics were determined. BS showed spherical and polygonal morphology and its XRD pattern was similar to starch extracted from other cereal sources. The amount of reducing sugar, starch and amylose content in extracted BS were 0.99 ± 0.33 %, 86.32 ± 0.22 % and 21.02 ± 1.89 % respectively, which indicates that BS is a suitable base material for the formation of edible coatings. XG was mixed with BS in different ratios (1:1, 2:1, 3:1 and 4:1) to optimize the best ratio of combination for composite coatings. The coating with a ratio of 2:1 was very smooth and was chosen for incorporation of LEO and the coatings physical, functional, mechanical, thermal and micro-structural characteristics were examined. The coating S5 with 1.25 % (w/v) concentration of LEO showed the best results with least moisture content (MC), minimum water vapor permeability (WVP) and maximum contact angle value. Moreover, the S5 formulation had the highest antioxidant (73.3 %) ability and maximum antimicrobial efficiency with inhibition zones of 22.09 ± 0.06 mm and 28.65 ± 0.14 mm against S. aureus and E. coli respectively. The coatings were then coated on plum fruit, and various parameters like weight loss, pH, shrinkage and TSS were calculated every 4th day during the 20 days of refrigeration period. The coated plums' ripening pace was delayed by the S5 formulation which improved moisture retention, maintained the plums' TSS value and overall pH. Therefore, composite coatings made up of BS, XG and 1.25 % (w/v) can be used as a cost-effective bio-active coating material for plum preservation under refrigeration conditions.

Recent advancements in chitosan-based intelligent food freshness indicators: Categorization, advantages, and applications

With an increasing emphasis on food safety and public health, there is an ongoing effort to develop reliable, non-invasive methods to assess the freshness of diverse food products. Chitosan-based food freshness indicators, leveraging properties such as biocompatibility, biodegradability, non-toxicity, and high stability, offer an innovative approach for real-time monitoring of food quality during storage and transportation. This review introduces intelligent food freshness indicators, specifically those utilizing pH-sensitive dyes like anthocyanins, curcumin, alizarin, shikonin, and betacyanin. It highlights the benefits of chitosan-based intelligent food freshness indicators, emphasizing improvements in barrier and mechanical properties, antibacterial activity, and composite film solubility. The application of these indicators in the food industry is then explored, alongside a concise overview of chitosan's limitations. The paper concludes by discussing the challenges and potential areas for future research in the development of intelligent food freshness indicators using chitosan. Thus, chitosan-based smart food preservation indicators represent an innovative approach to providing real-time data for monitoring food quality, offering valuable insights to both customers and retailers, and playing a pivotal role in advancing the food industry.

Intelligent double-layer film based on gellan gum/modified anthocyanin/curcumin/sodium alginate/zinc oxide for monitoring shrimp freshness

In this study, intelligent double-layer films were prepared using modified black rice anthocyanin (MBRA)-curcumin (CUR)-gellan gum (GG) as the inner indicator layer and sodium alginate (ALG)‑zinc oxide (ZnO) as the outer antimicrobial layer. The bilayer films were successfully prepared, as revealed by scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction measurements. The mechanical characteristics, moisture content, and water vapor resistance of GG-MBRA/CUR1@ALG-ZnO, GG-MBRA/CUR2@ALG-ZnO, and GG-MBRA/CUR3@ALG-ZnO films showed significant enhancement compared to GG-MBRA/CUR3 and ALG-ZnO films. The bilayer films exhibited excellent pH responsiveness and reacted effectively to ammonia. The outer layer significantly improved the antioxidant and antibacterial properties of the inner layer. When the films were applied to shrimp, it was found that the double-layer films not only monitored the freshness of the shrimp in real-time but also were influential in extending the shelf life of the shrimp by about 1 d. Therefore, the double-layer film demonstrated potential as a smart packaging material for real-time monitoring of meat product freshness.

Intelligent Food Packaging: Quaternary Ammonium Chitosan/Gelatin Blended Films Enriched with Blueberry Anthocyanin-Derived Cyanidin for Shrimp and Milk Freshness Monitoring

Blueberry anthocyanin-derived cyanidin (BAC) was used to prepare a series of responsive food freshness packaging films by compounding it with quaternary chitosan (QC) and gelatin (G). The fundamental properties, pH sensitivity, and functional attributes of the films were examined. The BAC solutions exhibited notable variations in color (from red to pink to violet) under different pH conditions. The incorporation of BAC resulted in improved UV-vis shielding capabilities but compromised the mechanical strength of the films (with tensile strength values from 85.02 to 44.89 MPa, elongation at break from 13.08% to 3.6%, and water vapor transmission rates from 5.24 × 10-9 to 7.80 × 10-9 g m-1 s-1 Pa-1). The QC-G-BAC films, containing 5-15 wt% BAC, exhibited noticeable color changes in acidic/ammonia environments within a short timeframe, easily discernible to the naked eye. Furthermore, the inclusion of BAC significantly enhanced the antioxidant and antimicrobial properties of the films. The addition of 5-15 wt% BAC to QC-G-BAC films could be employed for assessing the freshness of fresh shrimp (from red to dark red) and pasteurized milk (from red to dark earthy yellow). Among them, the total color difference (ΔE) of QC-G-BAC5 film was significantly correlated with the pH, acidity, and total colony count of pasteurized milk (R = 0.846, -0.930, -0.908, respectively). This new concept in smart packaging offers a straightforward and user-friendly freshness indicator.

A review on improving the sensitivity and color stability of naturally sourced pH-sensitive indicator films

Naturally sourced pH-sensitive indicator films are of interest for real-time monitoring of food freshness through color changes because of their safety. Therefore, natural pigments for indicator films are required. However, pigment stability is affected by environmental factors, which can in turn affect the sensitivity and color stability of the pH-sensitive indicator film. First, natural pigments (anthocyanin, betalain, curcumin, alizarin, and shikonin) commonly used in pH-sensitive indicator films are presented. Subsequently, the mechanisms behind the change in pigment color under different pH environments and their applications in monitoring food freshness are also described. Third, influence factors, such as the sources, types, and pH sensitivity of pigments, as well as environmental parameters (light, temperature, humidity, and oxygen) of sensitivity and color stability, are analyzed. Finally, methods for improving the pH-sensitive indicator film are explored, encapsulation of natural pigments, incorporation of a hydrophobic film-forming matrix or function material, and protective layer have been shown to enhance the color stability of indicator films, the addition of copigments or mental ions, blending of different natural pigments, and the utilization of electrospinning have been proved to increase the color sensitivity of indicator films. This review could provide theoretical support for the development of naturally sourced pH-sensitive indicator films with high stability and sensitivity and facilitate the development in the field of monitoring food freshness.

Alizarin complexone modified UiO-66-NH2 as dual-mode colorimetric and fluorescence pH sensor for monitoring perishable food freshness

Food prone to spoilage has a huge food safety hazard, threatening people's health, so early detection of food spoilage is a continuous and urgent need. Herein, we developed a dual-mode response sensor, alizarin complexone@UiO-66-NH2, which can accurately detect pH. The sensor demonstrated significant changes in color from pale yellow to deep pink, while the fluorescence shifted from light blue to blue violet. Moreover, both UV absorption and fluorescence intensity showed a linear correlation with pH raging from 4.5 to 7.5. These results indicate that the sensor effectively responds to pH, making it suitable for detecting the freshness of perishable food. To put this into practice, we integrated the sensor with cellulose-based filter paper to determine the freshness of shrimp and beef, which was proved to be effective in assessing freshness. In the future, it can be combined with intelligent colorimetric and fluorescence instruments to achieve visual detection.

Biopolymer-based intelligent packaging integrated with natural colourimetric sensors for food safety and sustainability

Increasing concerns about global food safety and security demands innovative solutions, particularly in food packaging technologies. This review paper investigates the advanced integration of natural colourimetric sensors with biopolymer-based packaging materials, with a focus on developments over the past 5 years. These sensors change colour in response to environmental stimuli such as oxygen, temperature, pH and relative humidity, intuitively indicating food freshness and safety. The paper emphasizes the recent advancements in using natural colourants, such as alizarin, anthocyanins, betacyanins, chlorophyll, curcumin and shikonin. When combined with either natural or synthetic biopolymers, these colourants contribute to a sustainable and eco-friendly approach to food packaging. Such technological advances could notably decrease the incidence of foodborne illnesses by signaling potential spoilage or contamination, while also addressing food wastage by providing clear indications of edibility. Although challenges remain in sensor longevity and widespread adoption, the prospects for biopolymer-based food packaging with embedded natural colourimetric sensors are promising.

Enhancement of Colorimetric pH-Sensitive Film Incorporating Amomum tsao-ko Essential Oil as Antibacterial for Mantis Shrimp Spoilage Tracking and Fresh-Keeping

Anthocyanin-based smart packaging has been widely used for food freshness monitoring, but it cannot meet the requirements of smart films with antibacterial properties. This study aimed to enhance the antibacterial properties of intelligent films by incorporating Amomum tsao-ko essential oil (AEO) for mantis shrimp spoilage tracking and keeping the product fresh. A smart film was designed by introducing AEO and purple potato anthocyanin (PPA) to a polyvinyl alcohol/cellulose nanocrystal (PVA/CNC) polymer matrix. Our findings revealed that APP and AEO imparted the smart film with a favorable oxygen barrier, UV protection, mechanical properties, and antioxidant and pH/NH3-sensitive functions. Interestingly, the PVA/CNC-AEO-PPA film achieved 45.41% and 48.25% bactericidal efficacy against S. putrefaciens and V. parahaemolyticus, respectively. Furthermore, a visual observation confirmed that the target film (PVA/CNC-AEO-PPA) changed color significantly during mantis shrimp spoilage: rose red-light red-pink-light gray-dark gray. Meanwhile, the PVA/CNC-AEO-PPA film retarded the quality deterioration of the mantis shrimp effectively. The PVA/CNC-AEO-PPA film shows great application potential in mantis shrimp preservation and freshness monitoring; it is expected to become a rapid sensor for detecting seafood quality non-destructively and a multifunctional film for better preservation of product quality.

Ammonia-Responsive Colorimetric Film of Phytochemical Formulation (Alizarin) Grafted onto ZIF-8 Carrier with Poly(vinyl alcohol) and Sodium Alginate for Beef Freshness Monitoring

In this study, we devised a photothermally stable phytochemical dye by leveraging alizarin in conjunction with the metal-organic framework ZIF-8 (AL@ZIF-8). The approach involved grafting alizarin into the microporous structure of ZIF-8 through physical adsorption and hydrogen-bonding interactions. AL@ZIF-8 significantly enhanced the photostability and thermostability of alizarin. The nanoparticles demonstrate substantial color changes in various pH environments, showcasing their potential for meat freshness monitoring. Furthermore, we introduced an intelligent film utilizing poly(vinyl alcohol)-sodium alginate-AL@ZIF-8 (PA-SA-ZA) for detecting beef freshness. The sensor exhibited a superior water contact angle (52.34°) compared to the alizarin indicator. The color stability of the film was significantly enhanced under visible and UV light (ΔE < 5). During beef storage, the film displayed significant color fluctuations correlating with TVB-N (R2=0.9067), providing precise early warning signals for assessing beef freshness.

Electrospun fiber mats based on chitosan-carrageenan containing Malva sylvestris anthocyanins: Physic-mechanical, thermal, and barrier properties along with application as intelligent food packaging materials

This study aimed to encapsulate Malva sylvestris extract (MSE) into chitosan-carrageenan (CH-KC) fibers using the electrospinning technique and monitor the freshness of silver carp fillets during the refrigerated storage conditions for 8 days. The CH-KC + MSE 4 % fiber mats were red at pH values lower than 3, purple at pH 4-6, dark blue at pH 7, green at pH 8-10, and brown at pH 11-12. The tensile strength, elongation at break, water vapor permeability, oxygen transmission rate, moisture content, and water solubility of fabricated fiber mats were 7.71-11.02 MPa, 13.12 %-30.00 %, 7.35-20.01 × 10-4 g mm/m2 h Pa, 3.81-8.23 cm3/m2 h, 15.74 %-27.34 %, and 3.90 %-7.56 %, respectively. Regarding the potential application of a fabricated indicator for freshness monitoring of silver carp fillets, total viable count, psychrotrophic bacterial count, pH, and total volatile basic nitrogen reached 8.91 log CFU/g, 8.03 log CFU/g, 8.10, and 40.18 mg N/100 g at the end of the study, respectively. Meanwhile, the CH-KC + MSE 4 % fiber mat color changed from white to green. These findings suggest that CH-KC + MSE 4 % fiber mats can be further utilized in the food industry to control the freshness of refrigerated silver carp fillets.

Biomedical Trends in Stimuli-Responsive Hydrogels with Emphasis on Chitosan-Based Formulations

Biomedicine is constantly evolving to ensure a significant and positive impact on healthcare, which has resulted in innovative and distinct requisites such as hydrogels. Chitosan-based formulations stand out for their versatile utilization in drug encapsulation, transport, and controlled release, which is complemented by their biocompatibility, biodegradability, and non-immunogenic nature. Stimuli-responsive hydrogels, also known as smart hydrogels, have strictly regulated release patterns since they respond and adapt based on various external stimuli. Moreover, they can imitate the intrinsic tissues' mechanical, biological, and physicochemical properties. These characteristics allow stimuli-responsive hydrogels to provide cutting-edge, effective, and safe treatment. Constant progress in the field necessitates an up-to-date summary of current trends and breakthroughs in the biomedical application of stimuli-responsive chitosan-based hydrogels, which was the aim of this review. General data about hydrogels sensitive to ions, pH, redox potential, light, electric field, temperature, and magnetic field are recapitulated. Additionally, formulations responsive to multiple stimuli are mentioned. Focusing on chitosan-based smart hydrogels, their multifaceted utilization was thoroughly described. The vast application spectrum encompasses neurological disorders, tumors, wound healing, and dermal infections. Available data on smart chitosan hydrogels strongly support the idea that current approaches and developing novel solutions are worth improving. The present paper constitutes a valuable resource for researchers and practitioners in the currently evolving field.

Alizarin-embedded γ-cyclodextrin-based metal-organic framework in a methylcellulose/polyvinyl alcohol film for maintaining and monitoring grass carp freshness

Multifunctional packaging films that monitor and maintain fish freshness hold significant potential for use in the food industry. This study introduces a multifunctional intelligent packaging film comprising alizarin (ALI)-embedded cubic γ-cyclodextrin metal-organic frameworks (γ-CD-MOFs) (denoted as γ-CD-MOFs@ALI) in a methylcellulose/polyvinyl alcohol (MP)-based matrix to achieve colorimetric monitoring and enhanced preservation of fish freshness. The MP/γ-CD-MOFs@ALI reveals a rapid color transition in 3 min from yellow color progressively darkens to purple as the pH increases from 2.0 to 10.0. And it is proved that the as-prepared film owns high antibacterial activity against Gram-positive bacteria (S. aureus), impressive ABTS+ radical scavenging rates of 85.54 ± 1.25 %, and effective ALI sustained-release properties. The intelligent packaging film exhibits an excellent colorimetric response to total volatile basic nitrogen and provides exceptional freshness preservation performance, effectively prolonging the shelf life of Ctenopharyngodon idella (grass carp) under 25 °C to 42 h.

Development of pH-freshness smart label based on gellan gum film incorporated with red cabbage anthocyanins extract and its application in postharvest mushroom

Novel colorimetric films based on gellan gum (GG) containing red cabbage anthocyanins extract (RCAE) were prepared as pH-freshness smart labels for real-time visual detection of mushroom freshness. The GG/RCAE films had excellent pH and ammonia sensitivity. The GG/RCAE-0.2-0.3 films had the highest sensitivity to acetic acid. The SEM micrographs, AFM images, FT-IR and XRD spectra demonstrated that RCAE were successfully combined into the film-forming substrate. The incorporation of RCAE resulted in the increase of thermal stability, opacity and surface hydrophobicity of films. Meanwhile, the GG/RCAE-0.2 film exhibited stronger tensile strength and excellent color stability at 4℃. The color changes of GG/RCAE-0.2 film were visually easier to distinguish during the storage of mushroom. The results showed the GG/RCAE films could be used as pH-freshness smart labels to detect the freshness of fruits and vegetables.

Multipurpose arrowroot starch films with anthocyanin-rich grape pomace extract: Color migration for food simulants and monitoring the freshness of fish meat

Extraction of anthocyanins from grape pomace, is a way of valuing these abundant by-products with low added value. Its integration into films may allow it to be used in bioactive packaging, which creates new color and solubility properties for food and smart food packaging which tracks the freshness of fish. Films of arrowroot starch added with different concentrations of grape pomace extract (GPE) were flexible to handle, reddish and presented a high content of anthocyanins. The water vapor permeability increased by 17 %, while the tensile strength of arrowroot starch film decreased by 79 % with the addition of 40 % GPE. The addition of GPE increased the solubility of the starch film in aqueous and lipid food simulants by 121 and 119 %. The GPE pigment preferentially migrated to the aqueous simulant due to the hydrophilic nature of anthocyanins and starch. The GPE film showed distinguishable color changes in different pH buffer solutions from pink at pH 2 to light blue at pH 7 and slightly yellowish green at pH 10. When the composite films were monitored for fish meat freshness, the change in color of the film from reddish pink to slightly green after 96 h of storage at 25 °C was evident.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.