Effect of flour type on Maillard reaction and acrylamide formation during toasting of bread crisp model systems and mitigation strategies

Unraveling the development of Maillard reaction indicators in popped cereal grains

Popped grains, subjected to high temperatures (180 to 310 °C), may undergo the Maillard reaction (MR). This study, for the first time, assessed MR indicators in popped sorghum and maize using two methods: traditional hot salt (310 °C) and the industrial hot air process (210 °C), at initial (furosine), intermediate (Hydroxymethylfurfural "HMF") and advanced stages (browning index), while monitoring changes in carbohydrates and color parameters (L*, a*, b*, ΔE). A browner color was observed in popped grains, with a higher ΔE in the hot salt treatments which showed the highest furosine (37.0 to 81.0 mg/100 g) and HMF (4.0 to 10.8 mg/100 g) contents. Both popping methods triggered the MR, with either the temperature difference and/or the salt potentially acting as catalysts. These findings highlight the importance of optimizing processing techniques and maximizing the potential contributions to food quality, paving an approach for higher-quality and healthier grain-based products.

Formation of acrylamide in commercially available plant-based meat alternatives during domestic cooking

The formation and occurrence of acrylamide in carbohydrate-rich foods has been extensively studied over the course of the past few decades. However, the emergence of plant-based meat alternatives presents a new challenge in this field. The aim of this study was to evaluate the levels of acrylamide in commercially available plant-based meat alternatives before and after heat treatment. Trace levels of acrylamide were detected in all samples before heat-treatment, while the concentrations increased in 11 samples out of 16 after heat-treatment. The highest concentration of acrylamide increased from 65.7 ± 6.6 µg kg-1 before to 119 ± 12 µg kg-1 after heat-treatment. Principal component analysis (PCA) indicated that besides macronutrient composition, the use of additives and processing techniques have a strong influence on acrylamide formation in plant-based meat alternatives. The latter was supported by the analysis of self-made meat alternative models that were prepared using only the base ingredients.

Tea's Characteristic Components Eliminate Acrylamide in the Maillard Model System

This study investigated the effects of various characteristic components of tea-theaflavins, catechins, thearubigins, theasinensins, theanine, catechin (C), catechin gallate (CG), epicatechin (EC), epicatechin gallate (ECG), epigallocatechin (EGC), epigallocatechin gallate (EGCG), gallocatechin (GC), and gallocatechin gallate (GCG)-on acrylamide formation. The results revealed that most of tea's characteristic components could significantly eliminate acrylamide, ranked from highest to lowest as follows: GC (55.73%) > EC (46.31%) > theaflavins (44.91%) > CG (40.73%) > thearubigins (37.36%) > ECG (37.03%) > EGCG (27.37%) > theabrownine (22.54%) > GCG (16.21%) > catechins (10.14%) > C (7.48%). Synergistic elimination effects were observed with thearubigins + EC + GC + CG, thearubigins + EC + CG, thearubigins + EC + GC, theaflavins + GC + CG, and thearubigins + theaflavins, with the reduction rates being 73.99%, 72.67%, 67.62%, 71.03%, and 65.74%, respectively. Tea's components reduced the numbers of persistent free radicals to prevent acrylamide formation in the model system. The results provide a theoretical basis for the development of low-acrylamide foods and the application of tea resources in the food industry.

Formation and Reduction of Toxic Compounds Derived from the Maillard Reaction During the Thermal Processing of Different Food Matrices

Advanced glycation end products (AGEs), heterocyclic aromatic amines (HAAs), acrylamide (AA), 5-hydroxymethylfurfural (5-HMF), and polycyclic aromatic hydrocarbons (PAHs) are toxic substances that are produced in certain foods during thermal processing by using common high-temperature unit operations such as frying, baking, roasting, grill cooking, extrusion, among others. Understanding the formation pathways of these potential risk factors, which can cause cancer or contribute to the development of many chronic diseases in humans, is crucial for reducing their occurrence in thermally processed foods. During thermal processing, food rich in carbohydrates, proteins, and lipids undergoes a crucial Maillard reaction, leading to the production of highly active carbonyl compounds. These compounds then react with other substances to form harmful substances, which ultimately affect negatively the health of the human body. Although these toxic compounds differ in various forms of formation, they all partake in the common Maillard pathway. This review primarily summarizes the occurrence, formation pathways, and reduction measures of common toxic compounds during the thermal processing of food, based on independent studies for each specific contaminant in its corresponding food matrix. Finally, it provides several approaches for the simultaneous reduction of multiple toxic compounds.

Dietary Exposure to Acrylamide Has Negative Effects on the Gastrointestinal Tract: A Review

Changing eating habits and an increase in consumption of thermally processed products have increased the risk of the harmful impact of chemical substances in food on consumer health. A 2002 report by the Swedish National Food Administration and scientists at Stockholm University on the formation of acrylamide in food products during frying, baking and grilling contributed to an increase in scientific interest in the subject. Acrylamide is a product of Maillard's reaction, which is a non-enzymatic chemical reaction between reducing sugars and amino acids that takes place during thermal processing. The research conducted over the past 20 years has shown that consumption of acrylamide-containing products leads to disorders in human and animal organisms. The gastrointestinal tract is a complex regulatory system that determines the transport, grinding, and mixing of food, secretion of digestive juices, blood flow, growth and differentiation of tissues, and their protection. As the main route of acrylamide absorption from food, it is directly exposed to the harmful effects of acrylamide and its metabolite-glycidamide. Despite numerous studies on the effect of acrylamide on the digestive tract, no comprehensive analysis of the impact of this compound on the morphology, innervation, and secretory functions of the digestive system has been made so far. Acrylamide present in food products modifies the intestine morphology and the activity of intestinal enzymes, disrupts enteric nervous system function, affects the gut microbiome, and increases apoptosis, leading to gastrointestinal tract dysfunction. It has also been demonstrated that it interacts with other substances in food in the intestines, which increases its toxicity. This paper summarises the current knowledge of the impact of acrylamide on the gastrointestinal tract, including the enteric nervous system, and refers to strategies aimed at reducing its toxic effect.

Research progress on generation, detection and inhibition of multiple hazards - acrylamide, 5-hydroxymethylfurfural, advanced glycation end products, methylimidazole - in baked goods

While baking produces attractive flavors for foods, it also generates various endogenous by-products, including acrylamide (AA), 5-hydroxymethylfurfural (5-HMF), advanced glycation end products (AGEs) and methylimidazole (MI). This review briefly presents the recent studies on the above hazards, and research progress on the formation and control of the above substances in detail. There have been more detailed studies on a single category of hazards. However, few studies and reports have considered the integrated prevention and control of multiple hazards, which is related to the difficulty of analyzing the reaction mechanisms of multiple hazards at multiple scales and under multiple phases in complex food matrices. In this regard, the sample pretreatment methods are a crucial step in achieving simultaneous detection. The coordinated implementation of various methods, including reducing precursor levels, modifying baking conditions and equipment, and incorporating exogenous additives, is necessary to achieve a synchronized reduction in multiple hazardous substances.

5-Hydroxymethylfurfural multimers induce pseudo-allergic reaction through FcεRI at high doses

Under acidic and high temperature conditions, 5-hydroxymethylfurfural (5-HMF) converted from sugar further produces dimers (Compound II) and trimers (Compound III). The polymers were less reported, and sensitization effect of them was reported in this study. Compounds II and III induced the local and systemic anaphylaxis effect in passive cutaneous anaphylaxis mice model and activated RBL-2H3 cell inducing [Ca2+ ] mobilization, resulting in the release of β-hexosaminidase and histamine in vitro. The gene knockdown assay figured out that Compounds II and III induced degranulation through FcεRI. Further, Compounds II and III had a certain affinity with FcεRI by cell membrane chromatography and may combine on the "proline sandwich" structure indicated by molecular docking. All above suggested Compounds II and III can induce pseudo-allergic reaction through FcεRI in vivo and in vitro. Our work provides basic research to prove that the newly discovered 5-HMF transformants, Compounds II and III, induce pseudo-allergic reaction in vitro and in vivo through FcεRI, which is different pathway from 5-HMF. In foods with high sugar content, the sensitization of Compounds II and III needs more attention. In high-sugar foods and medicines, especially traditional Chinese medicine injections, the content of transformants needs to be detected.

Selection of a Novel DNA Aptamer Specific for 5-Hydroxymethylfurfural Using Capture-SELEX

A capture systematic evolution of ligands by exponential enrichment (Capture-SELEX) was described to discover novel aptamers specific for 5-hydroxymethylfurfural (5-HMF), and a biosensor based on molecular beacon was constructed to detect 5-HMF. The ssDNA library was immobilized to streptavidin (SA) resin to select the specific aptamer. The selection progress was monitored using real-time quantitative PCR (Q-PCR), and the enriched library was sequenced by high-throughput sequencing (HTS). Candidate and mutant aptamers were selected and identified by Isothermal Titration Calorimetry (ITC). The FAM-aptamer and BHQ1-cDNA were designed as the quenching biosensor to detect 5-HMF in milk matrix. After the 18th round selection, the Ct value decreased from 9.09 to 8.79, indicating that the library was enriched. The HTS results indicated that the total sequence numbers for 9th, 13th, 16th, and 18th were 417054, 407987, 307666, and 259867, but the number of sequences for the top 300 sequences was gradually increased from 9th to 18th, and the ClustalX2 analysis showed that there were four families with high homology rate. ITC results indicated that the K_d values of H1 and its mutants H1-8, H1-12, H1-14, and H1-21 were 2.5 μM, 1.8 μM, 1.2 μM, 6.5 μM, and 4.7 μM. The linear range of the quenching biosensor was from 0 μM to 75 μM, and it had a similar linear range in the 0.1% milk matrix. This is the first report to select a novel aptamer specific for 5-HMF and develop quenching biosensor for the rapid detection of 5-HMF in milk matrix.

Impact of Some Enzymatic Treatments on Acrylamide Content in Biscuits

Since its discovery in many heat-treatment foods in 2002, many efforts have been made to reduce acrylamide levels in foods. Methods to reduce acrylamide levels by reducing Maillard reaction products have been considered. However, baking cookies produces acrylamide, a carcinogenic compound. This study aimed to use a new quantitative index and formula for L-asparaginase, glucose oxidase, their 1:1 blending enzymes, baker’s yeast, and green tea powder (0.5 g/kg wheat flour) at a new proposed temperature of 37 °C for 30 min to reduce acrylamide production in biscuits and bakery products using new indicators such as asparagine reduction (%), the asparagine/acrylamide ratio, acrylamide reduction (%), and the asparagine/reducing sugar ratio. The highest acrylamide concentrations were reduced from 865 mg/kg in the blank sample (BT0) to 260 and 215 mg/kg in the mixed enzyme powder (1:1) (BT3)- and BT4-treated samples, respectively. The biscuit samples treated with 0.5 g/kg L-asparaginase reduced the acrylamide levels by approximately 67.63%, while the BT3 samples showed acrylamide levels of 69.94% and asparagine levels of 68.75% and 47%, respectively, compared with percentage in the untreated sample (blank), 95%. This percentage was 54.16% for the BT4 samples. The results showed that acrylamide was formed during baking, and all treatment samples inhibited its formation, making it possible to produce foods with low levels of acrylamide in starchy foods in the food industry at 37 °C for 30 min and preserving the quality and nutritional value of the final product. It can be used as a specialty food or functional food and protects school-agechildren, as well as youth on campus, from approximately 70–80% of their daily intake of acrylamide.

The Contribution of Scalded and Scalded-Fermented Rye Wholemeal Flour to Quality Parameters and Acrylamide Formation in Semi-Wheat-Rye Bread

The aim of this study was to evaluate the influence of scalded (Sc) and scalded-fermented (FSc) (with Lactiplantibacillus paracasei No. 244 strain) rye wholemeal flour on the quality parameters and acrylamide formation in semi-wheat-rye bread. To that purpose, 5, 10 and 15% of Sc and FSc were used for bread production. Results showed that scalding increased fructose, glucose and maltose content in rye wholemeal. Lower concentrations of free amino acids were found in Sc when compared with rye wholemeal, but fermentation of Sc increased the concentrations of some amino acids (on average by 1.51 times), including gamma aminobutyric acid (GABA, by 1.47 times). Addition of Sc and FSc had a significant influence (p ≤ 0.05) on bread shape coefficient, mass loss after baking and most bread colour coordinates. Most of the breads with Sc or FSc showed lower hardness after 72 h of storage compared with the control (i.e., without Sc or FSc). FSc improved bread colour and flavour, as well as overall acceptability. Breads with 5 and 10% of Sc had a similar level of acrylamide to the control, while its level in breads with FSc was higher (on average, 236.3 µg/kg). Finally, different types and amounts of scald had varying effects on the quality of the semi-wheat-rye bread. FSc delayed staling and improved sensory properties and acceptability, as well as the GABA level of wheat-rye bread, while the same level of acrylamide as was seen in control bread could be reached when using between 5 and 10% of scalded rye wholemeal flour.

Reducing the production of acrylamide during the roasting of balloon flower roots in consumer appliances and industrial equipment

This study aimed to determine what conditions were needed to reduce the production of acrylamide when balloon flower roots [Platycodon grandiflorum (Jacq. A. DC.)] were heated. The conditions of temperature, time, and the type of equipment (i.e., consumer appliance or industrial equipment) were the important variables in the experiment. The official criterion for a recommended standard of acrylamide in tea product is less than 1000 µg/kg as determined by the Ministry of Food and Drug Safety in South Korea. A response surface methodology was used to determine whether the heated samples met the safety requirements. The most significant condition for consumer appliances was time and for industrial equipment was temperature. The optimal roasting time was 3.01 min with a consumer appliance and 4.18 min with industrial equipment at 110 ℃, a typical temperature in the field. The acrylamide content of the tested sample was significantly in agreement with the predicted amount (R ² > 0.950).

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01242-z.

Response Surface Optimization of Solar Drying Conditions and the Effect on the Quality Attributes and Drying Characteristics of Qula Casein

The objective of this study was to investigate the potential application of a mixed-mode solar dryer to Qula dehydration in the Qinghai-Tibet Plateau of China. A three-factor five-level central composite rotatable design (CCD) of the response surface methodology (RSM) was employed to evaluate the influences of drying process variables on quality attributes in terms of lipid oxidation [peroxide (POV) and thiobarbituric acid reactive substance (TBARS)] and Maillard reaction (5-hydroxymethylfurfural, 5-HMF). The impact of drying temperature (30−50 °C), material thickness (5−15 mm), and wind velocity (0.4−1.4 m/s) on the color, POV, TBARS, and 5-HMF of Qula were studied. Optimum operating conditions were found to be a temperature of 43.0 °C, material thickness of 11.0 mm, and wind velocity of 1.0 m/s based on the minimum of POV, TBARS, and 5-HMF. In this condition, the values of POV, TBARS, and 5-HMF were 0.65 meq/kg, 0.516 mg/kg, and 4.586 mg water/L, respectively, which are significantly lower than for drying of Qula by open sun-drying (p < 0.05). Compared with open sun-drying, the drying time of Qula by solar drying was shortened by 61.5%. The results indicate that the mixed-mode solar dryer is a feasibility drying technology for Qula and could effectively improve the quality of products.

Comparison of the Effects of 5-Hydroxymethylfurfural in Milk Powder Matrix and Standard Water on Oxidative Stress System of Zebrafish

5-Hydroxymethylfurfural (5-HMF) and furfural (FF) are products of the maillard reaction (MR) in milk powder and their safety is controversial. The concentration changes of 5-HMF and FF after a period of cold storage were determined by high-performance liquid chromatography (HPLC). Then, we compared the toxicity effects of 5-HMF (2, 20, or 200 μM) in milk powder matrix and standard water on the oxidative stress system of zebrafish embryos. The results showed that the concentration of 5-HMF was stable, and the concentration of FF degraded over time. 5-HMF-exposed zebrafish embryos had a LC₅₀ value of 961 μM for 120 h. High-concentration of 5-HMF exposure resulted in developmental toxicity and induced oxidative stress. 5-HMF exposure resulted in low expression of gstr gene at 200 μM in both matrices. Moreover, sod, cat, gstr, and gpxla genes were differentially highly expressed in other groups or showed no significant difference. Residual levels in all groups were well below the exposed dose, with a maximum value of only 0.4‱. These results provided a theoretical basis for understanding the effects of 5-HMF exposure in milk powder matrix on the oxidative stress system and suggested that the presence of 5-HMF in our daily consumption of milk powder does not produce significant toxic effects and need not be overstressed.

Acrylamide Contents of Local Snacks in Singapore

Acrylamide is a carcinogen that forms in foods processed at high temperatures. In this study, acrylamide contents of 30 local snacks commonly consumed by the three ethnic groups (Malay, Chinese, and Indian) in Singapore were analysed by using liquid chromatography-tandem mass spectrometry (LC-MS/MS). These snacks were chosen because they were consumed regularly by people of different classes and age groups in Singapore. Our results showed that the average content of acrylamide in Indian snacks (102.23 ng/g) was higher than those in Malay (75.14 ng/g) and Chinese snacks (70.78 ng/g). The high acrylamide levels in several snacks was probably due to the processing methods and the usage of acrylamide-inducing raw materials. Same snacks prepared by different manufacturers contained different levels of acrylamide, suggesting the possibility of acrylamide reduction in these snacks. This study provides an insight into the acrylamide levels of snacks commonly consumed by the three different ethnic groups in Singapore.

Effect of steaming process on the structural characteristics and antioxidant activities of polysaccharides from Polygonatum sibiricum rhizomes

Polygonatum sibiricum (P. sibiricum) rhizomes are widely used as a tonic and functional food, and are often processed to enhance their tonic function by repeated steaming and drying. As the most important constituent, the polysaccharide from P. sibiricum rhizomes (PSP) has demonstrated various activities, but the alteration of structural characteristics and activities of the purified PSPs during steaming process was rarely investigated. To well understand the effect of steaming process on the polysaccharides of P. sibiricum, neutral polysaccharides from P. sibiricum rhizomes (PSP0 ~ PSP9) after steaming were first isolated and purified, and then the chemical properties and antioxidant activities were determined. The results showed that the molar ratios of monosaccharides in PSPs were different. The molecular weights of PSPs were increased significantly after the fourth steaming. Morphological studies showed that the surface of PSPs became much tighter during the steaming process. Fourier transform infrared spectroscopy spectra displayed the polysaccharides had similar backbones and chemical groups. Furthermore, the antioxidant activity of PSPs was measured through radical scavenging tests. It was found that the radical scavenging activity of PSPs was elevated strikingly after steaming, and increased gradually with numbers of steaming process. The biological and chemical variance of PSPs revealed considerable segregation of PSP0, PSP1 ~ PSP4 and PSP5 ~ PSP9. In conclusion, our results proposed the fourth time as the optimal number of steaming to extract functional polysaccharide from P. sibiricum rhizomes.

Evaluation of acrylamide-removing properties of bacterial consortia under simulated gastrointestinal conditions

BACKGROUND

Previous studies have demonstrated the acrylamide-removing properties of probiotic monocultures; however, potential advantages of consortia over monocultures in reducing the dietary exposure to acrylamide have not been proven. Hence this work aims to assess the acrylamide (AA)-binding properties of bacterial consortia, consisting of either probiotic strains and / or representative bacteria of duodenal microbiota, exposed to simulated gastrointestinal conditions (SGC). The AA binding capacity of ten probiotic strains (PS) and six duodenal strains (NDS) was evaluated under different conditions; then, three different consortia (PS, NDS, and PS + NDS) were assessed under SGC.

RESULTS

Among individual PS, Bacillus coagulans GBI-30, Lactobacillus fermentum J23, L. pentosus J37 and J24, and L. casei Shirota, exhibited the highest AA-binding capacity (80-87%), while Bifidobacterium catenulatun ATCC27676, Streptococcus salivarius subsp. thermophilus ATCC19258, and S. gallolyticus ATCC9809 were the best (ca. 68%) NDS monocultures. Probiotic strain consortia showed higher (P < 0.05) AA binding capacity (> 90%) than monoculture bacteria. Conversely, individual NDS cultures displayed higher (P < 0.05) binding capacity than NDS consortia (60%). A significant reduction (P < 0.05) in AA removal capacity was observed when consortia were exposed to SGC, PS consortia being the most effective (> 60% removal).

CONCLUSION

These results suggest that consortia of specific PS could play an important role in reducing the intestinal availability of acrylamide. © 2021 Society of Chemical Industry.

Carob Pulp: A Nutritional and Functional By-Product Worldwide Spread in the Formulation of Different Food Products and Beverages. A Review

Carob (Ceratonia siliqua L.) pod is a characteristic fruit from the Mediterranean regions. It is composed by seeds, the valuable part due to the extraction of locust bean gum, and the pulp, considered a by-product of the fruit processing industry. Carob pulp is a mixture of macro- and micronutrients, such as carbohydrates, vitamins and minerals, and secondary metabolites with functional properties. In the last few years, numerous studies on the chemical and biological characteristics of the pulp have been performed to encourage its commercial use. Its potential applications as a nutraceutical ingredient in many recipes for food and beverage elaborations have been extensively evaluated. Another aspect highlighted in this work is the use of alternative processes or conditions to mitigate furanic production, recognized for its toxicity. Furthermore, carob pulp’s similar sensorial, chemical and biological properties to cocoa, the absence of the stimulating alkaloids theobromine and caffeine, as well as its low-fat content, make it a healthier potential substitute for cocoa. This paper reviews the nutritional and functional values of carob pulp-based products in order to provide information on the proclaimed health-promoting properties of this interesting by-product.

The effect of frying on browning, acrylamide and 5-hydroxymethylfurfural formation on Malaysian curry puff skin treated with l-asparaginase

Acrylamide and 5-hydroxymethylfurfural (HMF) is the product of the Maillard reaction and its accumulation may lead to adverse health effects. Hence, this paper aims to study the effect of l-asparaginase treatment (E100 U/kg and E500 U/kg), frying temperatures (180 °C, 190 °C, 200 °C) and times (2 min, 3 min, 5 min, 7 min) on acrylamide and HMF content after the frying process of curry puff skin. Colour development, moisture content, water activity analysis and sensory evaluation were also carried out. Frying condition at 190 °C for 5 min produced desirable attributes through sensory evaluation. Furthermore, the enzyme reduced the acrylamide and HMF level to 2500 μg/kg and 230 μg/kg respectively. Frying temperature plays a crucial role in acrylamide decomposition leading to the reduction of acrylamide content. Therefore, the use of this enzyme is plausible for the reduction of acrylamide and HMF in puff skin without altering the original quality.

Acrylamide assessment of wheat bread incorporating chia seeds (Salvia hispanica L.) by LC-MS/MS

We examined the acrylamide content in samples of wheat bread with chia seeds added at different concentrations (2%, 5%, 7%, 10%) and cooked at predefined conditions (20 min at 200°C) by a validated LC-MS/M method after QuEChERS extraction. The acrylamide contents of the bread samples with added chia seeds were compared with control wheat bread samples. The highest acrylamide values were found in bread with 5% chia seeds, showing a mean value of 156.5 ± 115.4 µg/kg, followed by bread with 10% chia seeds (150.2 ± 103.8 µg/kg). About 6% of the bread samples with added chia seeds reached acrylamide levels above the benchmark level set by the EU Regulation. No significant differences in acrylamide values were found between control samples and bread with different percentages of chia seeds (p > .05). The results obtained provide a first report on the possible contribution of chia to the increase of acrylamide formation in bread.

Optimization of processing parameters to control Maillard browning in ready-to-eat processed potatoes

Relationship among pH, a_w and Maillard browning was investigated in processed potatoes ready-to-eat during cooking and sterilization in autoclave to prevent their colors changes. Central composite rotational design was used for optimization of color (L*, a* and b*), browning index and intermediate compounds index. Reduction in the L* value and increase in the a*, b* value and browning index, indicators for Maillard browning of the processed potatoes were mitigated at pH 4.0-5.0 and a_w 0.96-1.00 and accelerated at pH less than 3.0 or more than 7.0 and a_w less than 0.84. Formation of intermediate compounds was intensified at pH 5.0 and a_w 0.99 and mitigated at pH 7.0 and a_w 0.84. Adjustment of the pH to 5.0 and keeping a_w at to 0.99 were the most effective parameters of to control Maillard browning in processed potatoes ready-to-eat.

Physicochemical quality and sensory acceptance of toasts with partial replacement of wheat flour by maize biomass flour

The aim of this study was to assess physicochemical and sensory viability of toasts developed from the partial replacement of wheat flour (WF) by maize biomass flour (MBF). Different levels of MBF (0, 5, 10, 15 and 20 g 100 g^-1) were used. Data obtained were evaluated by univariate and multivariate analyses. The level of replacement of WF by MBF influenced all physicochemical properties of the toast. Moisture (5.67-7.12 g 100 g^-1), hardness (56.67-131.66 N), chroma of crust and crumb (29.86-30.27 and 19.76-25.83, respectively), and hue angle of crust and crumb (60.32°-64.79° and 81.41°-82.06°, respectively) were increased; and area (2286.4-1658.1 mm²), specific volume (3.47-1.83 mL g^-1) and luminosity of crust and crumb (62.39-59.67 and 65.49-62.54, respectively) were decreased as the level of substitution of WF by MBF increased. The toasts did not present microbiological risk. The formulations with higher sensory acceptance were 5 and 15 g 100 g^-1 of MBF, being considered rich in proteins (16.25 and 15.43 g 100 g^-1, respectively) and rich in dietary fibers (12.10 and 16.02 g 100 g^-1, respectively), therefore with high nutritional and functional values. The production of toasts with partial replacement of WF by MBF is feasible in relation to physicochemical and sensory characteristics, which it may stimulate exploitation of this by-product and sustainable production of baked goods.

Effect of Microwave Heating on the Acrylamide Formation in Foods

Acrylamide (AA) is a neurotoxic and carcinogenic substance that has recently been discovered in food. One of the factors affecting its formation is the heat treatment method. This review discusses the microwave heating as one of the methods of thermal food processing and the influence of microwave radiation on the acrylamide formation in food. In addition, conventional and microwave heating were compared, especially the way they affect the AA formation in food. Available studies demonstrate differences in the mechanisms of microwave and conventional heating. These differences may be beneficial or detrimental depending on different processes. The published studies showed that microwave heating at a high power level can cause greater AA formation in products than conventional food heat treatment. The higher content of acrylamide in microwave-heated foods may be due to differences in its formation during microwave heating and conventional methods. At the same time, short exposure to microwaves (during blanching and thawing) at low power may even limit the formation of acrylamide during the final heat treatment. Considering the possible harmful effects of microwave heating on food quality (e.g., intensive formation of acrylamide), further research in this direction should be carried out.

Strawberry-like SiO2/Ag nanocomposites immersed filter paper as SERS substrate for acrylamide detection

In this work, based on the strawberry-like SiO₂/Ag nanocomposites (SANC) immersed filter paper, a newly surface-enhanced Raman scattering (SERS) substrate was constructed for the detection of acrylamide (AAm) in food products. To construct filter paper-based SANC (F-SANC) SERS substrates, SiO₂ nanoparticles (SNP) were firstly synthesized and acted as carriers. After that, the in-situ preparation of silver nanoparticles (Ag NP) on SNP surface was carried out to form the strawberry-like three-dimensional (3D) structure of SANC. Finally, SANC were entangled into the filter paper to produce nanoarchitecture, thus providing enhanced plasmon resonance between SANC with strong SERS signal. Under the optimized conditions, the method exhibited good performance toward AAm with a vast linear response from 0.1 nM to 50 μM (R = 0.9935), limit of detection (LOD) of 0.02 nM (S/N = 3), and the recoveries of 80.5%~105.6% for practical samples. This strategy showed good robustness in the rapid and sensitive detection of AAm, which could be a promising strategy in food analysis and verification.

Degradation of benzopyrene and acrylamide in roasted coffee beans by corona discharge plasma jet (CDPJ) and its effects on biochemical and sensory properties

This study was aimed to reduce the concentrations of benzopyrene (BaP) and acrylamide (ACR) in roasted coffee beans by corona discharge plasma jet (CDPJ). The initial concentrations of BaP and ACR in roasted beans were decreased by 53.6% and 32.0%, respectively, following CDPJ (powered by 20 kV DC/1.5 A) treatment for 60 min. The levels of total solid, total acid, chlorogenic acid, caffeine, trigonelline, and pH were insignificantly changed upon CDPJ treatment compared to controls. However, the concentration of total phenolic content and Agtron color values were altered significantly. The treatment of beans did not alter descriptive sensory properties of the corresponding coffee brews, except aroma and aftertaste characteristics. As the treatment time increased from 15 to 60 min, scores for aroma profiles in PCA plot were shifted from right to left, although overlapping was observed between 15- and 30-min-treated samples. Additionally, none of the treated samples were discriminated from the control by electronic tongue.

HMF causes anaphylactic symptoms by acting as a H1 receptor agonist

5-Hydroxymethylfurfural (HMF) can readily form by acid-catalyzed transformations of various sugars such as fructose, sucrose and to a lesser degree glucose, and is known to widely exist in various sugar-containing consumer products. Thus the potential health effect of HMF has been a subject of intensive studies. There have been earlier reports of HMF's undesirable effects at or above high micromolar concentrations. In this study, HMF is found to stimulate the H₁ receptor in vivo and in vitro. When assessed in cell culture and animal models, HMF was found to cause deformation of in cell culture studies of HUVECs at 50 μM, to increase the vascular permeability of paw skin at 1.0 mg/mL, and trigger symptoms of anaphylaxis in animal models at 32.5 μg/kg. At the molecular level, HMF was found to induce the release of NO and related cytokines, and trigger H₁ receptor-mediated inflammatory responses. Mutation studies also suggest the binding sites for HMF on the H₁ receptor. The findings described suggest the need for close monitoring of HMF contents in consumer products and their related side effects.

Acrylamide and Thermal-Processing Indexes in Market-Purchased Food

Determining acrylamide (AA) content in foods using chromatographic methods is expensive and time-consuming. Therefore, there is a need to develop a simple, economical method for monitoring the content of acrylamide in foods. This study analysed whether there is a relationship between acrylamide levels with some heat-induced parameters, such as 5-hydroxymethylfurfural (HMF) and browning, in order to assess their usefulness in predicting the potential acrylamide levels in market-purchased food. Sixty plant-based food products were tested. The correlation coefficients for AA levels with L*, a* and b* values and HMF content were significant (p < 0.05) for French fries and potato chips. There was no statistically significant correlation between thermal-processing indexes (HMF and colour parameters) and acrylamide levels in commercial bread, breakfast cereals and biscuits. The results indicate that these classical thermal-processing indexes are not directly related to the acrylamide content in commercial cereal-based food and they cannot be indicators of AA level. Thus, the correlation between HMF and colour parameters with acrylamide content depends on the type of food and it is difficult to estimate the amount of AA based on these classical thermal-processing indexes of market-purchased food.

Acrylamide-Formation Potential of Cereals: What Role Does the Agronomic Management System Play?

As bakery products contribute considerably to the daily intake of the carcinogen acting substance acrylamide (AA), the aim of this study was to evaluate the impact of the management system (conventional vs. organic farming) on AA precursor levels of free asparagine (Asn) across different cultivars of the cereal species, namely winter wheat (Triticum aestivum), winter spelt (Triticum aestivum ssp. spelta) and winter rye (Secale cereale) with simultaneous consideration of gained grain yields and flour qualities. For this purpose, orthogonal field trials were established at two sites in Southwest Germany over two growing seasons (2006–2007 and 2007–2008). The results indicated a significant impact of the management system on free Asn contents in white flour. Across all species, free Asn contents in the white flour was 26% lower under organic compared to conventional farming. The impact of the management system on individual cultivars was obvious with a maximum reduction in free Asn contents of 50% in wheat cultivars if organically produced (e.g., for cultivars Ludwig, Privileg, Capo). For spelt, a significant impact of the management system was only found in 2008 with a reduction in free Asn of up to 25% if organically produced. Across both cropping systems, cultivar Franckenkorn reached the lowest levels of free Asn. For rye, a significant impact of the management system was observed only in 2007 with 33% higher Asn amounts in the conventional management system. Independent of the cropping system, rye reached the highest levels of free Asn followed by wheat and spelt. Depending on species, there was also an impact of the two systems on crude protein. The organically cropped wheat had a significantly lower level, but this was not observed for spelt and for rye only in 2007. The possible reason for the low free Asn content in the organically produced wheat flour could partially be the lower crude protein amount. Furthermore, the results indicated that lower AA contents in bakery products can be achieved by proper selection of species (e.g., 66% lower if rye is replaced by wheat) and cultivars. With an appropriate choice of the cultivar, a reduction of up to 65% was possible within wheat, along with a reduction of 44% within spelt and 12.5% within rye. In summary, the results indicated that organically produced wheat especially offers the opportunity to significantly lower the AA potential of bread and bread rolls by the choice of raw materials low in free Asn.

Simultaneous Determination of Acrylamide and Hydroxymethylfurfural in Extruded Products by LC-MS/MS Method

The aim of this study was to develop a liquid chromatography/tandem mass spectrometry LC-MS/MS method for the simultaneous determination of acrylamide and hydroxymethylfurfural (HMF) in corn snack products enriched with food industry by-products: brewer's spent grain (BSG), sugar beet pulp (SBP) and apple pomace (AP). Development of the method included the study of different sources for ionization, different mobile phases, different extraction conditions as well as different methods of sample preparation. Finally, the single LC-MS/MS method was developed for the analysis of both analytes in one step with a duration of 20 min using a simple single-step extraction. The method with apparent recoveries of 91.4 and 90.4 for acrylamide and HMF, respectively, was applied for the analysis of non-extruded and extruded samples. The obtained results shown that the acrylamide content was Collapse

Key Words

• LC-MS/MS method
• acrylamide
• extruded snack products
• hydroxymethylfurfural

Collapse

MESH Headings

• Acrylamide/analysis
• Beta vulgaris/chemistry
• Chromatography, High Pressure Liquid
• Food Contamination/analysis
• Food Industry
• Furaldehyde/analogs & derivatives
• Furaldehyde/analysis
• Malus/chemistry
• Tandem Mass Spectrometry/methods
• Zea mays/chemistry

Collapse

Grants

• 1321 Hrvatska Zaklada za Znanost

Collapse

Affiliation(s)

Antun Jozinović Faculty of Food Technology Osijek, Josip Juraj Strossmayer University of Osijek, Franje Kuhača 20, 31000 Osijek, Croatia.
Bojan Šarkanj Department of Food Technology, University Centre Koprivnica, University North, Trg dr. Žarka Dolinara 1, 48000 Koprivnica, Croatia.
Đurđica Ačkar Faculty of Food Technology Osijek, Josip Juraj Strossmayer University of Osijek, Franje Kuhača 20, 31000 Osijek, Croatia.
Jelena Panak Balentić Faculty of Food Technology Osijek, Josip Juraj Strossmayer University of Osijek, Franje Kuhača 20, 31000 Osijek, Croatia.
Domagoj Šubarić Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia.
Tanja Cvetković Research and Development, Podravka d.d., Ante Starčevića 32, 48000 Koprivnica, Croatia.
Jasmina Ranilović Research and Development, Podravka d.d., Ante Starčevića 32, 48000 Koprivnica, Croatia.
Sunčica Guberac Faculty of Agrobiotechnical Sciences Osijek, Josip Juraj Strossmayer University of Osijek, Vladimira Preloga 1, Osijek 31000, Croatia.
Jurislav Babić Faculty of Food Technology Osijek, Josip Juraj Strossmayer University of Osijek, Franje Kuhača 20, 31000 Osijek, Croatia.

Collapse

Evaluation of Asparagine Concentration as an Indicator of the Acrylamide Formation in Cereals Grown under Organic Farming Conditions

This study investigated the impact of organically grown cereals on the level of free asparagine (Asn) with simultaneous consideration of grain yields and flour qualities over three growing seasons in Germany. Additionally, the relation of free Asn and acrylamide (AA) was investigated. By including free Asn results of a second trial site, heritability of the trait free Asn was calculated. Free Asn was significantly influenced by species and within species by cultivars. Rye showed the highest free Asn amount, followed by einkorn, emmer, wheat, and spelt. Replacing rye with spelt would reduce free Asn by 85%. Cultivars differed in free Asn by up to 67% (wheat), 55% (spelt), and 33% (rye). Year significantly influenced free Asn levels. Heritability was high for wheat and spelt concerning locations, but regarding years, heritability was low for wheat but high for spelt and rye. For organically grown cereals, the relation between free Asn and AA formation has never been investigated. Across species and years, a correlation of R2 = 0.69 *** was found. Thus, free Asn can serve as an indicator for AA formation. In conclusion, the level of free Asn can be highly influenced by proper selection of species and cultivars.