Non-target analysis of intentionally and non intentionally added substances from plastic packaging materials and their migration into food simulants

Safety assessment of natural materials for food contact in high temperature applications: Migration studies with solid simulant (Tenax®)

The concern of conventional plastics for food contact has opened the use of natural vegetal materials which can be used even at high temperature. However, their safety in use has to be carefully evaluated. This study shows the migration tests of volatile compounds to Tenax® at 175 °C for 1 h. Hexadecanoic, octadecanoic and tetracosanoic acid were detected and quantified, presenting values well below the specific migration limits (SML) according to Regulation (EU) No 10/2011. Aldehydes were detected and semi-quantified and were generally below the migration limits established for compounds without SML. Compounds related to the manufacturing process of different types of food contact materials (FCM) were identified. The use of this type of dishes made from natural materials does not present a risk to the consumer due to the migration of volatile compounds when used at high temperature, in accordance with the conditions of use set by the manufacturer.

Advancements in Assays for Micro- and Nanoplastic Detection: Paving the Way for Biomonitoring and Exposomics Studies

Although plastic pollution and exposure to plastic-related compounds have received worldwide attention, health risks associated with micro- and nanoplastics (MNPs) are largely unknown. Emerging evidence suggests MNPs are present in human biofluids and tissue, including blood, breast milk, stool, lung tissue, and placenta; however, exposure assessment is limited and the extent of human exposure to MNPs is not well known. While there is a critical need to establish robust and scalable biomonitoring strategies to assess human exposure to MNPs and plastic-related chemicals, over 10,000 chemicals have been linked to plastic manufacturing with no existing standardized approaches to account for even a fraction of these exposures. This review provides an overview of the status of methods for measuring MNPs and associated plastic-related chemicals in humans, with a focus on approaches that could be adapted for population-wide biomonitoring and integration with biological response measures to develop hypotheses on potential health effects of plastic exposures. We also examine the exposure risks associated with the widespread use of chemical additives in plastics. Despite advancements in analytical techniques, there remains a pressing need for standardized measurement protocols and untargeted, high-throughput analysis methods to enable comprehensive MNP biomonitoring to identify key MNP exposures in human populations. This review aims to merge insights into the toxicological effects of MNPs and plastic additives with an evaluation of analytical challenges, advocating for enhanced research methods to fully assess, understand, and mitigate the public health implications of MNPs.

Simultaneous targeted and non-targeted analysis of contaminants in fertilizers in Quebec, Canada

In this study, an LC-MS based analytical method was developed and validated for the simultaneous targeted analysis (14 bisphenols and 14 plasticizers) and suspect screening of other plastic-related contaminants in various types of fertilizers. The ultrasound-assisted extraction method showed overall satisfactory performances, achieving a median absolute recovery of 85 % for the target compounds in different types of fertilizers. The method was applied to sixteen different types of fertilizers, including fertilizing residual materials (n = 8 types), one cattle manure, and seven mineral fertilizers collected in Quebec, Canada in 2022 and 2023. Relatively higher levels of the targeted bisphenols and plasticizers were detected in some fertilizing residual materials, such as municipal biosolids and deinking residues. 4-Hydroxyphenyl 4-isoprooxyphenylsulfone (D-8) and bis(2-ethylhexyl) phthalate (DEHP) were dominant contaminants in these matrixes, with concentrations up to 35.6 and 64.7 μg g-1 dw, respectively. A non-targeted workflow was successfully applied to municipal biosolids and deinking residues, and >30 contaminants were identified across multiple chemical families at level 1 identification confidence, with most of them previously unreported in various types of fertilizers. For example, new color developers, N-(2-((Phenylcarbamoyl)amino)phenyl)benzenesulfonamide (NKK-1304) and 2,4-bis(phenylsulfonyl)phenol (DBSP), were reported in deinking residues. This work illustrates the complexity of the contaminant mixtures in fertilizers such as municipal biosolids and deinking residues.

Development of analysis method for m-xylenediamine as aldehyde scavenger using HPLC-PDA

The objective of this study was to develop an analytical method for m-xylenediamine (m-XDA), an aldehyde scavenger, in various food simulants and food matrices. The analysis was performed using HPLC-UV (270 nm) with a Capcell pak MGII C18 column (4.6 × 250 mm, 5 μm). The method validation encompassed evaluations of specificity, linearity, accuracy, precision, limit of detection (LOD), and limit of quantification (LOQ) across five food simulants and six food matrices. In the calibration curve range of 1-100 μg/mL, excellent linearity was observed with R2 ≥ 0.9992. The accuracy and precision were within the ranges of 86.4-98.6% and 0.7-2.9 relative standard deviation (RSD%), respectively. The LOD and LOQ were in the ranges of 0.26-0.56 μg/mL and 0.79-1.71 μg/mL, respectively. The significance lies in the development of analysis methods for each food matrix, not only for smart packaging simulant analysis. This research makes it well-suited for smart packaging safety management.

Distribution characteristics and relationship of microplastics, phthalate esters, and bisphenol A in the Beiyun River basin of Beijing

Urban rivers are closely related to human life, and due to the widespread use of plastic products, rivers have become important carriers of pollutants such as microplastics (MP), phthalate esters (PAEs), and bisphenol A (BPA). However, our understanding of the distribution characteristics and relationships of MP, PAEs, and BPA in rivers is limited. In this study, MP, six PAEs and BPA were detected in the water and sediments of the Beiyun River basin. Polyvinyl chloride (PVC) was the most abundant type of microplastic, while di(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) were the most abundant PAEs. MP, PAEs, and BPA in both water and sediment showed positive correlations, with stronger correlations and higher pollution levels in sediment than in water. The tendency for PAE congeners to partition into sediments increased with a higher octanol-water partition coefficient (Kow). There was a significant positive correlation between the distribution tendency of ∑6PAEs and TOC in sediments with a pearson correlation coefficient of 0.717. Rivers with more frequent human activities and higher levels of urbanization in the vicinity had a higher abundance of various pollutants and a greater diversity of MP types.

Recent Advances in Purple Sweet Potato Anthocyanins: Extraction, Isolation, Functional Properties and Applications in Biopolymer-Based Smart Packaging

Petroleum-based plastic packaging materials have negative impacts on the environment and food safety. Natural biopolymer-based food packaging materials are the proper substitutes for plastic-based ones, which is because biopolymers are nontoxic, biodegradable and even edible. The incorporation of bioactive and functional substances into a biopolymer-based film matrix can produce novel smart packaging materials. Anthocyanins, one class of natural colorants with potent antioxidant activity and pH-response color-changing ability, are suitable for producing biopolymer-based smart packaging films. The purple sweet potato is a functional food rich in anthocyanins. In the past decade, numerous studies have reported the extraction of anthocyanins from purple sweet potato and the utilization of purple sweet potato anthocyanins (PSPAs) in biopolymer-based smart packaging film production. However, no specific review has summarized the recent advances on biopolymer-based smart packaging films containing PSPAs. Therefore, in this review, we aim to systematically summarize the progress on the extraction, isolation, characterization, purification and functional properties of PSPAs. Moreover, we thoroughly introduce the preparation methods, physical properties, antioxidant and antimicrobial activity, pH sensitivity, stability and applications of biopolymer-based smart packaging films containing PSPAs. Factors affecting the extraction and functional properties of PSPAs as well as the properties of biopolymer-based films containing PSPAs are discussed.

Non-targeted identification and risk assessment of unknown substances in disposable plastic tableware by GC-Orbitrap HRMS

Disposable plastic tableware was widely used and it was particularly important to identify potential hazardous substances in it and evaluate the risk to humans health. In this study, 85 substances were identified in 60 samples (22 bowls, 20 sporks, and 18 straws) by methanol extraction and non-targeted analysis using GC-Orbitrap HRMS. Subsequently, 14 high-risk substances were further screened and their migration in the samples was measured in three food simulants. Finally, based on the proposed safety limit assessment scheme for EU- authorized and unauthorized substances, the risk assessment of exposure to high-risk substances in disposable plastic tableware was performed for three age groups. The results showed that the dibutyl phthalate and bis(2-ethylhexyl) phthalate in some samples exceeded the safety limit value. Overall, the risk of bowls was lower than spock and straws, and the potential exposure risk for young children was higher than that of adults and older children.

Development of a robust non-targeted analysis approach for fast identification of endocrine disruptors and their metabolites in human urine for exposure assessment

Endocrine disrupting chemicals are of concern because of possible human health effects, thus they are frequently included in biomonitoring studies. Current analytical methods are focused on known chemicals and are incapable of identifying or quantifying other unknown chemicals and their metabolites. Non-targeted analysis (NTA) methods are advantageous since they allow for broad chemical screening, which provides a more comprehensive characterization of human chemical exposure, and can allow elucidation of metabolic pathways for unknown chemicals. There are still many challenges associated with NTA, which can impact the results obtained. The chemical space, i.e., the group of known and possible compounds within the scope of the method, must clearly be defined based on the sample preparation, as this is critical in identifying chemicals with confidence. Data acquisition modes and mobile phase additives used with liquid chromatography coupled to high-resolution mass-spectrometry can affect the chemicals ionized and structural identification based on the spectral quality. In this study, a sample preparation method was developed using a novel clean-up approach with CarbonS cartridges, for endocrine-disrupting chemicals in urine, including new bisphenol A analogues and benzophenone-based UV filters, like methyl bis (4-hydroxyphenyl acetate). The study showed that data dependent acquisition (DDA) had a lower identification rate (40%) at low spiking levels, i.e., 1 ng/mL, compared to data independent acquisition (DIA) (57%), when Compound Discoverer was used. In DDA, more compounds were identified using Compound Discoverer, with an identification rate of 95% when ammonium acetate was compared to acetic acid (82%) as a mobile phase additive. TraceFinder software had an identification rate of 53% at 1 ng/mL spiking level using the DDA data, compared to 40% using the DIA data. Using the developed method, 2,4 bisphenol F was identified for the first time in urine samples. The results show how NTA can provide human exposure information for risk assessment and regulatory action but standardized reporting of procedures is needed to ensure study results are reproducible and accurate. His Majesty the King in Right of Canada, as represented by the Minister of Health, 2024.

Mechanical recycling of printed flexible plastic packaging: The role of binders and pigments

Low-density polyethylene (LDPE), extensively employed in flexible plastic packaging, often undergoes printing with inks. However, during the mechanical recycling of post-consumer waste, these inks act as contaminants, subsequently compromising the quality and usability of recycled material. To understand better exactly which ink components cause which effects, this study comprehensively assesses the thermal behavior of three organic pigments and two commonly utilised binders, correlated with the impact on the mechanical recycling of LDPE-based flexible plastic packaging. In this regard, the study focuses on four pivotal factors: processability, mechanical properties, aesthetic attributes, and volatile organic compound profiles. The results indicate that nitrocellulose, used as a binder, degrades during reprocessing, resulting in film discoloration and the emission of potentially odorous compounds. Conversely, pigments are found to be dispersed within droplets of polyurethane binder in LDPE recyclates, whilst reprocessing printed samples detrimentally affects film properties, notably dart drop impact resistance, strain at break, and the number of inclusions. Additionally, it is shown that both inks comprise components that emit volatile compounds during reprocessing: non-thermally stable components, nitrocellulose and pigment yellow PY13, as well as low-molecular weight molecules from polyurethane and by-products from wax, plasticisers, and additives.

Disposable Plastic Waste and Associated Antioxidants and Plasticizers Generated by Online Food Delivery Services in China: National Mass Inventories and Environmental Release

China's online food delivery (OFD) services consume enormous amounts of disposable plastics. Here, we investigated and modeled the national mass inventories and environmental release of plastics and chemical additives in the plastic. The extra-tree regression identified six key descriptors in determining OFD sales in Chinese cities. Approximately 847 kt of OFD plastic waste was generated in 2021 (per capita 1.10 kg/yr in the megacities and 0.39 kg/yr in other cities). Various additives were extensively detected, with geomean concentrations of 140.96, 4.76, and 0.25 μg/g for ∑8antioxidants, ∑21phthalates, and bisphenol A (BPA), respectively. The estimated mass inventory of these additives in the OFD plastics was 164.7 t, of which 51.1 t was released into the atmosphere via incineration plants and 51.0 t was landfilled. The incineration also released 8.07 t of polycyclic aromatic hydrocarbons and 39.1 kt of particulate matter into the atmosphere. Takeout food may increase the dietary intake of phthalates and BPA by 30% to 50% and raise concerns about considerable exposure to antioxidant transformation products. This study provides profound environmental implications for plastic waste in the Chinese OFD industry. We call for a sustainable circular economy action plan for waste disposal, but mitigating the hazardous substance content and their emissions is urgent.

Recent Advances in Non-Targeted Screening of Compounds in Plastic-Based/Paper-Based Food Contact Materials

Ensuring the safety of food contact materials has become a pressing concern in recent times. However, detecting hazardous compounds in such materials can be a complex task, and traditional screening methods may not be sufficient. Non-targeted screening technologies can provide comprehensive information on all detectable compounds, thereby supporting the identification, detection, and risk assessment of food contact materials. Nonetheless, the non-targeted screening of food contact materials remains a challenging issue. This paper presents a detailed review of non-targeted screening technologies relying on high-resolution mass spectrometry for plastic-based and paper-based food contact materials over the past five years. Methods of extracting, separating, concentrating, and enriching compounds, as well as migration experiments related to non-targeted screening, are examined in detail. Furthermore, instruments and devices of high-resolution mass spectrometry used in non-targeted screening technologies for food contact materials are discussed and summarized. The research findings aim to provide a theoretical basis and practical reference for the risk management of food contact materials and the development of relevant regulations and standards.

Migration Studies and Endocrine Disrupting Activities: Chemical Safety of Cosmetic Plastic Packaging

The endocrine activity and endocrine disruptor (ED) chemical profiles of eleven plastic packaging materials covering five major polymer types (3PET, 1HDPE, 4LDPE, 2 PP, and 1SAN) were investigated using in vitro cell-based reporter-gene assays and a non-targeted chemical analysis using gas chromatography coupled to mass spectrometry (GC-MS). To mimic cosmetic contact, six simulants (acidic, alkaline, neutral water, ethanol 30%, glycerin, and paraffin) were used in migration assays performed by filling the packaging with simulant. After 1 month at 50 °C, simulants were concentrated by Solid Phase Extraction (SPE) or Liquid-Liquid Extraction (LLE). The migration profiles of seven major endocrine disrupting chemicals detected from GC-MS in the different materials and simulants were compared with Estrogen Receptor (ER) and Androgen Receptor (AR) activities. With low extraction of ED chemicals in aqueous simulants, no endocrine activities were recorded in the leachates. Paraffin was shown to be the most extracting simulant of antiandrogenic chemicals, while glycerin has estrogenic activities. Overall, ED chemical migration in paraffin was correlated with hormonal activity. The NIAS 2,4-di-tert-butyl phenol and 7,9-di-tert-butyl1-oxaspiro (4,5) deca-6,9-diene-2,8-dione were two major ED chemicals present in all polymers (principally in PP and PE) and in the highest quantity in paraffin simulant. The use of glycerin and liquid paraffin as cosmetic product simulants was demonstrated to be relevant and complementary for the safety assessment of released compounds with endocrine activities in this integrated strategy combining bioassays and analytical chemistry approaches.

The contribution of high-resolution GC separations in plastic recycling research

One convenient strategy to reduce environmental impact and pollution involves the reuse and revalorization of waste produced by modern society. Nowadays, global plastic production has reached 367 million tons per year and because of their durable nature, their recycling is fundamental for the achievement of the circular economy objective. In closing the loop of plastics, advanced recycling, i.e., the breakdown of plastics into their building blocks and their transformation into valuable secondary raw materials, is a promising management option for post-consumer plastic waste. The most valuable product from advanced recycling is a fluid hydrocarbon stream (or pyrolysis oil) which represents the feedstock for further refinement and processing into new plastics. In this context, gas chromatography is currently playing an important role since it is being used to study the pyrolysis oils, as well as any organic contaminants, and it can be considered a high-resolution separation technique, able to provide the molecular composition of such complex samples. This information significantly helps to tailor the pyrolysis process to produce high-quality feedstocks. In addition, the detection of contaminants (i.e., heteroatom-containing compounds) is crucial to avoid catalytic deterioration and to implement and design further purification processes. The current review highlights the importance of molecular characterization of waste stream products, and particularly the pyrolysis oils obtained from waste plastics. An overview of relevant applications published recently will be provided, and the potential of comprehensive two-dimensional gas chromatography, which represents the natural evolution of gas chromatography into a higher-resolution technique, will be underlined.

Disposable Polypropylene Face Masks: A Potential Source of Micro/Nanoparticles and Organic Contaminates in Humans

We have been effectively protected by disposable propylene face masks during the COVID-19 pandemic; however, they may pose health risks due to the release of fine particles and chemicals. We measured micro/nanoparticles and organic chemicals in disposable medical masks, surgical masks, and (K)N95 respirators. In the breathing-simulation experiment, no notable differences were found in the total number of particles among mask types or between breathing intensities. However, when considering subranges, <2.5 μm particles accounted for ∼90% of the total number of micro/nanoparticles. GC-HRMS-based suspect screening tentatively revealed 79 (semi)volatile organic compounds in masks, with 18 being detected in ≥80% of samples and 44 in ≤20% of samples. Three synthetic phenolic antioxidants were quantified, and AO168 reached a median concentration of 2968 ng/g. By screening particles collected from bulk mask fabrics, we detected 18 chemicals, including four commonly detected in masks, suggesting chemical partition between the particles and the fabric fibers and chemical exposure via particle inhalation. These particles and chemicals are believed to originate from raw materials, intentionally and nonintentionally added substances in mask production, and their transformation products. This study highlights the need to study the long-term health risks associated with mask wearing and raises concerns over mask quality control.

Mass Spectrometry-Based Techniques for the Detection of Non-Intentionally Added Substances in Bioplastics

The safety of food contact materials is a hot topic since chemicals can migrate from packaging into food, thus raising health concerns about and/or producing changes in the organoleptic properties of foodstuffs. Migration tests are required to demonstrate the compliance with current regulations and to investigate the transferred compounds. In this context, mass spectrometry is the analytical technique of choice for the detection and quantitation of both intentionally added substances, such as antioxidants, stabilizers, processing aids, and non-intentionally added substances (NIAS). Untargeted strategies represent a major analytical challenge, providing a comprehensive fingerprinting of the packaging material and migrating components, allowing for NIAS identification. Hyphenated mass spectrometry-based techniques have been devised for screening the presence of migrating contaminants and for quantitation purposes. Both low-resolution (LRMS) and high-resolution (HRMS) methods were screened, with a special emphasis on the latter because of its capability to directly characterize food contact materials with minimal/no sample preparation, avoiding chromatographic separation, and reducing sample handling, analysis costs, and time. Examples related to the migration of contaminants from existing or newly developed bioplastic materials will be discussed, providing an overview of the most used MS-based methods, covering the state-of-the-art approaches from 2012 up to 2022.

Identification of potential migrants from epoxy and organosol coatings used in metal food cans

The coatings of metal cans may release complex mixtures of migrants into the contained foods, including non-intentionally added substances (NIAS), such as reaction products. All migrating substances should be studied to demonstrate their safety. In this work, the characterisation of two epoxy and organosol coatings was performed using several techniques. Firstly, the type of coating was identified using FTIR-ATR. Screening techniques based on purge and trap (P&T) and solid-phase microextraction (SPME) coupled to GC-MS were used to investigate volatiles from coatings. For the identification of semi-volatile compounds, an appropriate extraction was performed before analysis by GC-MS. The most abundant substances were compounds with at least one benzene ring and an aldehyde or alcohol group in their structures. Furthermore, a method to quantify some of the identified volatiles was explored. Secondly, HPLC with fluorescence detection (HPLC-FLD) was used to determine non-volatile compounds such as bisphenol analogues and bisphenol A diglycidyl ethers (BADGEs), with subsequent confirmation by LC-MS/MS. Additionally, migration assays were performed by this technique to determine non-volatile compounds migrating into food simulants. Bisphenol A (BPA) and all BADGE derivatives except BADGE.HCl were detected in the migration extracts. Moreover, BADGE-solvent complexes such as BADGE.H₂O.BuEtOH, BADGE.2BuEtOH, etc. were also tentatively identified using the accurate mass provided by time-of-flight mass spectrometry (TOF-MS).

Endocrine modulating chemicals in food packaging: A review of phthalates and bisphenols

Phthalates and bisphenol chemicals have been widely used globally in packaging materials and consumer products for several decades. These highly functional chemicals have become a concern due to their toxicity (i.e., endocrine/hormone modulators) and ability to migrate from food contact materials (FCMs) into food matrices and the environment resulting in human and environmental health risks. FCMs, composed of postconsumer materials, are particularly high risk for containing these compounds. The evaluation of postconsumer recycled feedstocks in FCMs is compulsory and selection of an appropriate detection method to comply with applicable regulations is necessary to evaluate human and environmental safety. Numerous regulations have been proposed and passed globally for both compound classes that are recognized as priority pollutants by the United States Environmental Protection Agency and the European Union. Several brand owners and retailers have also released their own "restricted substance lists" due to the mounting consumer and regulatory concerns. This review article has two goals: (1) discuss the utilization, toxicology, human exposure routes, and occurrence levels of phthalates and bisphenols in FCMs and associated legislation in various countries and (2) discuss critical understanding and updates for detection/quantification techniques. Current techniques discussed include extraction and sample preparation methods (solid-phase microextraction [SPME], headspace SPME, Soxhlet procedure, ultrasound-assisted extraction), chromatographic techniques (gas, liquid, detectors), and environmental/blank considerations for quantification. This review complements a previous review of phthalates in foods from 2009 by discussing phthalate and bisphenol characteristics, analytical methods of determining concentrations in packaging materials, and their influence on the migration potential into food.

Safety of recycled plastics and textiles: Review on the detection, identification and safety assessment of contaminants

In 2019, 368 mln tonnes of plastics were produced worldwide. Likewise, the textiles and apparel industry, with an annual revenue of 1.3 trillion USD in 2016, is one of the largest fast-growing industries. Sustainable use of resources forces the development of new plastic and textile recycling methods and implementation of the circular economy (reduce, reuse and recycle) concept. However, circular use of plastics and textiles could lead to the accumulation of a variety of contaminants in the recycled product. This paper first reviewed the origin and nature of potential hazards that arise from recycling processes of plastics and textiles. Next, we reviewed current analytical methods and safety assessment frameworks that could be adapted to detect and identify these contaminants. Various contaminants can end up in recycled plastic. Phthalates are formed during waste collection while flame retardants and heavy metals are introduced during the recycling process. Contaminants linked to textile recycling include; detergents, resistant coatings, flame retardants, plastics coatings, antibacterial and anti-mould agents, pesticides, dyes, volatile organic compounds and nanomaterials. However, information is limited and further research is required. Various techniques are available that have detected various compounds, However, standards have to be developed in order to identify these compounds. Furthermore, the techniques mentioned in this review cover a wide range of organic chemicals, but studies covering potential inorganic contamination in recycled materials are still missing. Finally, approaches like TTC and CoMSAS for risk assessment should be used for recycled plastic and textile materials.

Recent Advances in Natural Polyphenol Research

Polyphenols are secondary metabolites produced by plants, which contribute to the plant's defense against abiotic stress conditions (e.g., UV radiation and precipitation), the aggression of herbivores, and plant pathogens. Epidemiological studies suggest that long-term consumption of plant polyphenols protects against cardiovascular disease, cancer, osteoporosis, diabetes, and neurodegenerative diseases. Their structural diversity has fascinated and confronted analytical chemists on how to carry out unambiguous identification, exhaustive recovery from plants and organic waste, and define their nutritional and biological potential. The food, cosmetic, and pharmaceutical industries employ polyphenols from fruits and vegetables to produce additives, additional foods, and supplements. In some cases, nanocarriers have been used to protect polyphenols during food processing, to solve the issues related to low water solubility, to transport them to the site of action, and improve their bioavailability. This review summarizes the structure-bioactivity relationships, processing parameters that impact polyphenol stability and bioavailability, the research progress in nanocarrier delivery, and the most innovative methodologies for the exhaustive recovery of polyphenols from plant and agri-waste materials.

Antioxidant and Antimicrobial Biofoil Based on Chitosan and Japanese Knotweed (Fallopia japonica, Houtt.) Rhizome Bark Extract

A 70% ethanol_(aq) extract of the rhizome bark of the invasive alien plant species Japanese knotweed (JKRB) with potent (in the range of vitamin C) and stable antioxidant activity was incorporated in 1% w/v into a chitosan biofoil, which was then characterized on a lab-scale. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay confirmed the antioxidant activity of the JKRB biofoil upon contact with the food simulants A, B, C, and D1 (measured half-maximal inhibitory concentrations—IC₅₀) and supported the Folin–Ciocalteu assay result. The migration of the antioxidant marker, (−)-epicatechin, into all food simulants (A, B, C, D1, D2, and E) was quantified using liquid chromatography hyphenated to mass spectrometry (LC-MS). Calculations showed that 1 cm² of JKRB biofoil provided antioxidant activity to ~0.5 L of liquid food upon 1 h of contact. The JKRB biofoil demonstrated antimicrobial activity against Gram-positive bacteria. The incorporation of JKRB into the chitosan biofoil resulted in improved tensile strength from 0.75 MPa to 1.81 MPa, while elongation decreased to 28%. JKRB biofoil’s lower moisture content compared to chitosan biofoil was attributed to the formation of hydrogen bonds between chitosan biofoil and JKRB compounds, further confirmed with attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The JKRB biofoil completely degraded in compost in 11 days. The future upscaled production of JKRB biofoil from biowastes for active packaging may support the fights against plastic waste, food waste, and the invasiveness of Japanese knotweed, while greatly contributing to the so-called ‘zero-waste’ strategy and the reduction in greenhouse gas emissions.

Non-target screening for the identification of migrating compounds from reusable plastic bottles into drinking water

Reusable plastic sports bottles are used extensively worldwide, and little is known about the migration of chemicals from the bottles into drinking water. In this study, we investigated the chemical migration into drinking water stored for 24 h in new bottles, used bottles and bottles washed in the dishwasher. Non-target screening (NTS) by liquid-chromatography - high-resolution mass spectrometry (LC-HRMS) was performed to identify these compounds. We detected > 3500 dishwasher related compounds, with 430 showing migration even after subsequent flushing of the bottles. In addition, more than 400 plastic related compounds were detected, with high peaks for oligomers suspected to originate from the biodegradable polyester polycaprolactone, and aromatic amines, which may have been introduced as slip agents or antioxidants. These compounds have never been reported before in bottled water. Most of the identified compounds migrating out of the used bottles were plasticizers, antioxidants or photoinitiators. The presence of photoinitiators are of particular concern, due to possible endocrine disrupting effects. Furthermore, diethyltoluamide (DEET) was detected, which may have been formed from the plasticizer laurolactam. Typically, the dishwashing process enhanced the leaching of plastic related compounds, and even after additional water flushing, the average peak intensity of these compounds was only reduced by half.

Guidance in selecting analytical techniques for identification and quantification of non-intentionally added substances (NIAS) in food contact materials (FCMS)

There are numerous approaches and methodologies for assessing the identity and quantities of non-intentionally added substances (NIAS) in food contact materials (FCMs). They can give different results and it can be difficult to make meaningful comparisons. The initial approach was to attempt to prepare a prescriptive methodology but as this proved impossible; this paper develops guidelines that need to be taken into consideration when assessing NIAS. Different approaches to analysing NIAS in FCMs are reviewed and compared. The approaches for preparing the sample for analysis, recommended procedures for screening, identification, and quantification of NIAS as well as the reporting requirements are outlined. Different analytical equipment and procedures are compared. Limitations of today's capabilities are raised along with some research needs.

Characterization of Polyester Coatings Intended for Food Contact by Different Analytical Techniques and Migration Testing by LC-MSn

Polymeric coating formulations may contain different components such as cross-linking agents, resins, lubricants, and solvents, among others. If the reaction process or curing conditions are not applied in a proper way, these components may remain unreacted in the polymeric network and could be released and migrate into foods. In this study, several polyester coatings intended for food contact were investigated. Firstly, Fourier-transform infrared spectroscopy with an attenuated total reflectance (ATR-FTIR) spectrometer and confocal Raman microscopy were used to identify the type of coating. Then, different techniques, including gas chromatography coupled to mass spectrometry (GC-MS) and analysis by matrix-assisted laser desorption coupled to time-of-flight mass spectrometry (MALDI-TOF-MS), among others, were used to investigate the potential volatile and non-volatile migrants. Moreover, migration assays were carried out to evaluate the presence of monomers and to tentatively identify possible oligomers below 1000 Da. The analyses were performed by liquid chromatography coupled to ion trap mass spectrometry (LC-MSⁿ). Using the information collected from each analytical technique, it was possible to elucidate some of the starting substances used in the formulation of the polyester coatings analyzed in this study. In migration tests, several polyester oligomers were tentatively identified for which there is not toxicological data available and, therefore, no migration limits established to date.

Buy-now-pay-later: Hazards to human and planetary health from plastics production, use and waste

More than 8 billion tonnes of plastic were produced between 1950 and 2015, that is 1 tonne for every man, woman and child on our planet. Global plastic production has been growing exponentially with an annual growth rate of 8.4% since 1950, equating to approximately 380 million tonnes per annum. A further 50 kg of plastic is now being produced for each person every year with production continuing to accelerate. Here, we discuss the human and planetary health hazards of all that plastic. We consider each step in the journey of these complex and pervasive industrial materials: from their synthesis predominantly from fossil fuel feedstocks, through an often-brief consumer use as plastic products, and onto waste streams as fuel, permanent landfill or as unmanaged waste in our environment, food, air and bodies.

A Fast and Automated Strategy for the Identification and Risk Assessment of Unknown Substances (IAS/NIAS) in Plastic Food Contact Materials by GC-Q-Orbitrap HRMS: Recycled LDPE as a Proof-of-Concept

A fast and automated approach has been developed for the tentative identification and risk assessment of unknown substances in plastic food contact materials (FCM) by GC-Q-Orbitrap HRMS. The proposed approach combines GC-HRMS full scan data acquisition coupled to Compound Discoverer™ 3.2 software for automated data processing and compound identification. To perform the tentative identification of the detected features, a restrictive set of identification criteria was used, including matching with the NIST Mass Spectral Library, exact mass of annotated fragments, and retention index calculation. After the tentative identification, a risk assessment of the identified substances was performed by using the threshold of toxicological concern (TTC) approach. This strategy has been applied to recycled low-density polyethylene (LDPE), which could be used as FCM, as a proof-of-concept demonstration. In the analyzed sample, 374 features were detected, of which 83 were tentatively identified after examination of the identification criteria. Most of these were additives, such as plasticizers, used in a wide variety of plastic applications, oligomers of LDPE, and substances with chemical, industrial, or cosmetic applications. The risk assessment was performed and, according to the TTC approach, the obtained results showed that there was no risk associated with the release of the identified substances. However, complementary studies related to the toxicity of the unidentified substances and the potential mixture toxicity (cocktail effects) should be conducted in parallel using bioassays.

Plastic Products Leach Chemicals That Induce In Vitro Toxicity under Realistic Use Conditions

Plastic products contain complex mixtures of extractable chemicals that can be toxic. However, humans and wildlife will only be exposed to plastic chemicals that are released under realistic conditions. Thus, we investigated the toxicological and chemical profiles leaching into water from 24 everyday plastic products covering eight polymer types. We performed migration experiments over 10 days at 40 °C and analyzed the migrates using four in vitro bioassays and nontarget high-resolution mass spectrometry (UPLC-QTOF-MS^E). All migrates induced baseline toxicity, 22 an oxidative stress response, 13 antiandrogenicity, and one estrogenicity. Overall, between 17 and 8681 relevant chemical features were present in the migrates. In other words, between 1 and 88% of the plastic chemicals associated with one product were migrating. Further, we tentatively identified ∼8% of all detected features implying that most plastic chemicals remain unknown. While low-density polyethylene, polyvinyl chloride, and polyurethane induced most toxicological endpoints, a generalization for other materials is not possible. Our results demonstrate that plastic products readily leach many more chemicals than previously known, some of which are toxic in vitro. This highlights that humans are exposed to many more plastic chemicals than currently considered in public health science and policies.

Urinary benzophenones and synthetic progestin in Chinese adults and children: concentration, source and exposure

The endocrine-disrupting activities of UV filters and synthetic progestin have raised concerns about their adverse risks. In this study, 208 urine samples were collected from Shanghai residents for the determination of seven benzophenones (BPs) and six synthetic progestins. The highest median concentration (6.21ng g-1 Cr) was observed in young adults (21-50 years), followed by a concentration of 3.86 ng g-1 Cr in elderly adults (over 50 years old), and the lowest median concentration (1.32 ng g-1 Cr) was found in children (8-11 years old). The detection rates of BP-3 and EE2 in adults were 97% and 82%, and in children were 31% and 24%, respectively. Synthetic progestin levels in Shanghai, China, were relatively low compared to other countries. And the urinary BPs level showed an increasing trend in Chinese in the past 5 years. The principal component analysis suggested that adults' exposure to BP-1 and BP-3 was related, which occurs through food or dermal absorption of these chemicals present in cosmetic products and coatings. And diet was an important exposure pathway for children exposed to BPs. Despite relatively high levels of synthetic progestin for female and obese, the total estimated daily intake (EDI) was still lower than acceptable daily intake adopted by America. In the Monte-Carlo analysis, the 95th percentile of hazard quotients (HQs) was 0.83, which indicated that potential health risks were appreciated in the studied population.

Comprehensive Insight from Phthalates Occurrence: From Health Outcomes to Emerging Analytical Approaches

Phthalates are a group of chemicals used in a multitude of important industrial products (e.g., medical devices, children's toys, and food packages), mainly as plasticizers to improve mechanical properties such as flexibility, transparency, durability, and longevity of polyvinyl chloride (PVC). The wide occurrence of phthalates in many consumer products, including foods (e.g., bottled water, soft drinks, wine, milk, and meat) brings that most people are exposed to phthalates every day, which raises some concerns. Adverse health outcomes from phthalates exposure have been associated with endocrine disruption, deformities in the human reproductive system, increased risk of preterm birth, carcinogen exposure, among others. Apprehension related to the health risks and ubiquitous incidence of phthalates in foods inspires the development of reliable analytical approaches that allow their detection and quantification at trace levels. The purpose of the current review is to provide information related to the presence of phthalates in the food chain, highlighting the health risks associated with their exposure. Moreover, an overview of emerging extraction procedures and high-resolution analytical approaches for a comprehensive quantification of phthalates is presented.

Migration of substances from food contact plastic materials into foodstuff and their implications for human exposure

The safety of food contact plastic materials, including PP, PE, PET, PCT, PLA, PBT and cross-linked polyester, was assessed with regard to migrated substances. The migrated concentrations of overall migrants (OMs), terephthalic acid, acetaldehyde, 1,4-butanediol and lead, were determined according to the standards and specifications for utensils, containers and packages in Korea. Food simulants of 4% acetic acid, water and n-heptane were used for the analysis of the substances. The dietary exposures of terephthalic acid, acetaldehyde and 1,4-butanediol were assessed using the dietary concentrations and the food consumption data. As a result, the dietary exposures were considered to be safe comparing to the health-based guidance values. In the case of lead, the margin of exposure (MOE) approach was applied. The MOEs calculated using the UB concentration and mean consumption data were ranged from 3 to 1000, which indicated low concern for health risk. Moreover, in this study, the dietary exposures were estimated by the Korean MFDS and U.S. FDA methods, respectively. As a result, the assessed risks were considered to be low in both cases. Based on the results of current exposure assessments, it could be considered that the food contact plastic materials are properly controlled by the regulatory authorities.

Safety of Plastic Food Packaging: The Challenges about Non-Intentionally Added Substances (NIAS) Discovery, Identification and Risk Assessment

Several food contact materials (FCMs) contain non-intentionally added substances (NIAS), and most of the substances that migrate from plastic food packaging are unknown. This review aimed to situate the main challenges involving unknown NIAS in plastic food packaging in terms of identification, migration tests, prediction, sample preparation, determination methods and risk assessment trials. Most studies have identified NIAS in plastic materials as polyurethane adhesives (PU), polyethylene terephthalate (PET), polyester coatings, polypropylene materials (PP), multilayers materials, plastic films, polyvinyl chloride (PVC), recycled materials, high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Degradation products are almost the primary source of NIAS in plastic FCMs, most from antioxidants as Irganox 1010 and Irgafos 168, following by oligomers and side reaction products. The NIAS assessment in plastics FCMs is usually made by migration tests under worst-case conditions using food simulants. For predicted NIAS, targeted analytical methods are applied using GC-MS based methods for volatile NIAS and GC-MS and LC-MS based methods for semi- and non-volatile NIAS; non-targeted methods to analyze unknown NIAS in plastic FCMs are applied using GC and LC techniques combined with QTOF mass spectrometry (HRMS). In terms of NIAS risk assessment and prioritization, the threshold of toxicological concern (TTC) concept is the most applied tool for risk assessment. Bioassays with sensitive analytical techniques seem to be an efficient method to identify NIAS and their hazard to human exposure; the combination of genotoxicity testing with analytical chemistry could allow the Cramer class III TTC application to prioritize unknown NIAS. The scientific justification for implementing a molecular weight-based cut-off (<1000 Da) in the risk assessment of FCMs should be reevaluated. Although official guides and opinions are being issued on the subject, the whole chain's alignment is needed, and more specific legislation on the steps to follow to get along with NIAS.

Are microplastics correlated to phthalates in facility agriculture soil?

Intensive use of plastic films can induce contamination of microplastics (MPs) and phthalate esters (PAEs), but data on their relationship in agricultural soil has been scarce. This study investigated the occurrence of MPs and PAEs in Shouguang (SG) and Xuzhou (XZ), two typical facility agriculture areas in China with years of history of vegetable greenhouse plantation. Thirty-four soil samples covering greenhouse and non-greenhouse soils were collected. MPs were quantified using the laser direct infrared (LDIR) method to realize IR analysis for all the collected particles. The total MP and PAE was 380-3786 pieces/kg and 0.30-1.58 mg/kg, respectively. The MP content in greenhouse soil was significantly higher than that in non-greenhouse soil in both areas. However, this trend for PAEs was only found in XZ, but not in SG. A positive correlation was observed between MPs and PAEs in XZ but not in SG. Our results suggested that MP concentrations mainly depend on input, while the residue of PAEs in soil was a consequence of both input and removal. Even in the facility soil, MPs and PAEs may not always possess a definitive relationship, and other environmental factors must be considered to elucidate the relationship between them.

Tackling the toxics in plastics packaging

The widespread use of plastic packaging for storing, transporting, and conveniently preparing or serving foodstuffs is significantly contributing to the global plastic pollution crisis. This has led to many efforts directed toward amending plastic packaging’s end of life, such as recycling, or alternative material approaches, like increasingly using paper for food packaging. But these approaches often neglect the critical issue of chemical migration: When contacting foodstuffs, chemicals that are present in packaging transfer into food and thus unwittingly become part of the human diet. Hazardous chemicals, such as endocrine disrupters, carcinogens, or substances that bioaccumulate, are collectively referred to as “chemicals of concern.” They can transfer from plastic packaging into food, together with other unknown or toxicologically uncharacterized chemicals. This chemical transfer is scientifically undisputed and makes plastic packaging a known, and avoidable, source of human exposure to synthetic, hazardous, and untested chemicals. Here, I discuss this issue and highlight aspects in need of improvement, namely the way that chemicals present in food packaging are assessed for toxicity. Further, I provide an outlook on how chemical contamination from food packaging could be addressed in the future. Robust innovations must attempt systemic change and tackle the issue of plastic pollution and chemical migration in a way that integrates all existing knowledge.

The widespread use of plastic packaging for storing, transporting, and conveniently preparing or serving foodstuffs is significantly contributing to the global plastic pollution crisis. This Essay exhorts us to change the conversation about plastic packaging and address the chemicals that migrate into food.

Identification of 24 Unknown Substances (NIAS/IAS) from Food Contact Polycarbonate by LC-Orbitrap Tribrid HRMS-DDMS3: Safety Assessment

Twenty-four substances, mainly NIAS, have been tentatively identified in food contact polycarbonate through the application a new, fast, and automated analytical strategy for the investigation of unknowns in food contact materials. Most of the identified compounds were plasticizers, slip agents, antioxidants, and ultraviolet stabilizers and fragrances, and the majority of them have not been previously identified in PC food contact materials. The workflow setup includes an intelligent data acquisition applied using LC-Orbitrap Tribrid-HRMS (MS3), with an automated data processing using Compound DiscovererTM. To obtain a high confidence identification of unknown substances, a very strict criterion has been established, which comprises exact mass, isotopic profile, MS2 match, retention time, and MS3 match. To check for the safety of the migration from the food contact polycarbonate, a risk assessment was achieved using the threshold of the toxicological concern (TTC) approach. Except for the slip agent hexadecanamide, the compounds tentatively identified do not represent a risk.

Evaluation of the Occurrence of Phthalates in Plastic Materials Used in Food Packaging

Phthalates are multifunctional synthetic chemicals found in a wide array of consumer and industrial products, mainly used to improve the mechanical properties of plastics, giving them flexibility and softness. In the European Union, phthalates are prohibited at levels greater than 0.1% by weight in most food packaging. In the current study, headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-mass spectrometry (GC-MS) was optimized, through the multivariate optimization process, and validated to evaluate the occurrence of four common phthalates, di-iso-butyl phthalate (DIBP), butyl-benzyl phthalate (BBP), di-n-octyl phthalate (DOP), and 2,2,4,4-tetrabromodiphenyl (BDE), in different food packaging. The best extraction efficiency was achieved using the polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber at 80 °C for 30 min. The validated method showed good linearity, precision (RSD < 13%), and recoveries (90.2 to 111%). The limit of detection (LOD) and of quantification (LOQ) ranged from 0.03 to 0.08 µg/L and from 0.10 to 0.24 µg/L, respectively. On average, the phthalates concentration varied largely among the assayed food packaging. DIBP was the most predominant phthalate in terms of occurrence (71.4% of analyzed simples) and concentration (from 3.61 to 10.7 μg/L). BBP was quantified in only one sample and BDE was detected in trace amounts (<LOQ) in only two samples.

Supercritical Fluid Extraction Combined with Ultrahigh Performance Liquid Chromatography Quadrupole Time-of-Flight Mass Spectrometry for Determination of Extractables to Evaluate Compatibility of Drugs with Rubber Closures

Biological activity and pharmacological efficacy of protein drugs may be affected by the compatibility between drug and packaging materials. The compatibility of rubber closures seal cap has become the focus of many studies due to its complicated formulation. Despite of the significance of the issue, currently, there is little available data about organic leachables in drugs which is also not comprehensive. Since the concentration of migrants in drug is usually low and the matrix is complicated, the establishment of overall profile of extractables is crucial for the characterization of leachables. Herein, the supercritical fluid extraction (SFE) method was used because of its great extraction capacity and efficiency for low to medium polar extractables in rubber stoppers. The SFE conditions were optimized by response surface methodology (RSM). Experimental results of the extract yield were close to the predicted values (R² = 0.95). Then the extractables were qualitatively and quantitatively analyzed with ultrahigh performance liquid chromatography quadrupole time-of-flight mass spectrometry (UHPLC-QTOF MS). Finally, risk assessment was made by comparing predicted exposure with injection permitted daily exposure (pPDE) limit or threshold recommended by threshold of toxicological concern (TTC). The results showed that there are many extractables such as glyceride, fatty acids and derivatives, antioxidants, and degradation products. Among them degradation products were in the majority and content of 17 substances exceeded corresponding limits. Considering their unknown toxicology, more experiments are therefore needed to provide information on their toxicology and risk assessment. The study provides a reference for the compatibility of drugs, and quality supervision of pharmaceuticals packaging.

An overview of chemical contaminants and other undesirable chemicals in alcoholic beverages and strategies for analysis

The presence of chemical contaminant in alcoholic beverages is a widespread and notable problem with potential implications for human health. With the complexity and wide variation in the raw materials, production processes, and contact materials involved, there are a multitude of opportunities for a diverse host of undesirable compounds to make their way into the final product-some of which may currently remain unidentified and undetected. This review provides an overview of the notable contaminants (including pesticides, environmental contaminants, mycotoxins, process-induced contaminants, residues of food contact material [FCM], and illegal additives) that have been detected in alcoholic products thus far based on prior reviews and findings in the literature, and will additionally consider the potential sources for contamination, and finally discuss and identify gaps in current analytical strategies. The findings of this review highlight a need for further investigation into unwanted substances in alcoholic beverages, particularly concerning chemical migrants from FCMs, as well as a need for comprehensive nontargeted analytical techniques capable of determining unanticipated contaminants.

Non-targeted analysis and risk assessment of non-volatile compounds in polyamide food contact materials

Small molecules in food contact materials may migrate into food during their contact. To extensively analyze the migrants, non-targeted screening is needed to detect the migrants. The migrants' detection is difficult because of the complexity and the trace amount of the migrants. In this work, the dissolution precipitation method was used to extract small molecules in Polyamide (PA) kitchenware. The extract solutions were screened by ultra-performance liquid chromatography-quadrupole time-of-flight-mass spectrometry (UPLC-QTOF-MS) for non-targeted analysis and 64 different small molecules in materials were identified through the screening of a self-built database. Then, migration tests were performed to analyze migrants in food simulants. It suggests that the abundance of PA oligomers was the highest in migrants. The risk assessment of migrants revealed that the exposure of most migrants was at a safer level unlike the exposure of PA oligomers that exceeded their threshold of toxicological concern (TTC).

Ambient mass spectrometry as a tool for a rapid and simultaneous determination of migrants coming from a bamboo-based biopolymer packaging

New bamboo-based biopolymers are used as food packaging materials, but it must be evaluated to ensure consumers safety. In this study, migration from a commercial bamboo-based biopolymer to ethanol 10% (v/v), acetic acid 3% (w/v) and ethanol 95% (v/v) was studied. The migrants were determined from three different perspectives. Volatile and semi-volatile compounds were analyzed by gas chromatography-mass spectrometry (GC-MS). Twenty-five compounds were detected. In addition, a number of phytosterols were detected in ethanol 95%. Non-volatile compounds were identified and quantified by ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry (UPLC-Q/ToF). Twelve non-volatile compounds were detected in migration solutions, mainly melamine and its derivatives, coming from polymer resins present in the biopolymer. Melamine migration was higher than 50 mg/Kg in the third sequential migration test. Finally, the migration samples were analyzed by DART-SVP (direct analysis in real time coupled to standardized voltage and pressure). This methodology was able to detect simultaneously the main volatile and non-volatile migrants and their adducts in a very rapid and effective way and is shown as a promising tool to test the safety and legal compliance of food packaging materials.

Improving Sodium Alginate Films Properties by Phenolic Acid Addition

Currently, packaging materials constitute a group of the most commonly used products. Natural polymers are widely tested as potential packaging materials to replace traditional plastics. Sodium alginate is eco-friendly and reveals effective film-forming properties whereas tannic acid has been proposed as a sodium alginate cross-linker. Thin films of sodium alginate/tannic acid were obtained by solvent evaporation. Interactions between the components were determined as well as the maximum tensile strength and color change after contact with different solutions. Improvement in the physicochemical properties of the obtained films was noticed. Moreover, such films showed antioxidant properties. It may be assumed that materials based on a sodium alginate/tannic acid mixture are promising alternatives to traditional packaging materials.

Recent Trends in the Analysis of Chemical Contaminants in Beverages

Chemical contaminants should not be present in beverages for human consumption, but could eventually be ingested by consumers as they may appear naturally from the environment or be produced by anthropogenic sources. These contaminants could belong to many different chemical sources, including heavy metals, amines, bisphenols, phthalates, pesticides, perfluorinated compounds, inks, ethyl carbamate, and others. It is well known that these hazardous chemicals in beverages can represent a severe threat by the potential risk of generating diseases to humans if no strict quality control is applied during beverages processing. This review compiles the most updated knowledge of the presence of potential contaminants in various types of beverages (both alcoholic and non-alcoholic), as well as in their containers, to prevent undesired migration. Special attention is given to the extraction and pre-concentration techniques applied to these samples, as well as to the analytical techniques necessary for the determination of chemicals with a potential contaminant effect. Finally, an overview of the current legislation is carried out, as well as future trends of research in this field.

Oleamide, a Bioactive Compound, Unwittingly Introduced into the Human Body through Some Plastic Food/Beverages and Medicine Containers

The purpose of the study was to investigate the migration of oleamide, a polymer lubricant, and a bioactive compound, from various plastic, marketed containers for food/beverages and medicines into polymer contact liquid. Methanol, food/medicine simulants or real samples were used to extract polymer leachables and extractables. Migrated oleamide into polymer contact liquids was determined by ultra-high performance liquid chromatography coupled to mass spectrometry (UHPLC-MS). The concentration of oleamide in the extracts of medicinal and insulin syringes was 7351 ng mL^-1 and 21,984 ng mL^-1, respectively. The leachates of intravenous (i.v.) infusion bottle, medicinal and insulin syringes contained 17 ng mL^-1, 12 ng mL^-1 and 152 ng mL^-1, respectively. Oleamide in the extracts of dummies ranged from 30 to 39 ng mL^-1, while in the leachates of baby bottles, from 12 to 23 ng mL^-1. Leachates of soft drink bottles contained from 6 to 15 ng mL^-1 oleamide, milk bottles from 3 to 9 ng mL^-1, liquid yogurt bottles 17 ng mL^-1 and water bottles from 11 to 18 ng mL^-1. Bottled real matrices of oil and milk contained oleamide in the range from 217 to 293 ng mL^-1. Moreover, the source of migrated oleamide (e.g., containers, caps, other parts) was identified. Oleamide is listed in the current EU regulations without a specific migration limit. Accordingly, these values are considered of no concern, unless future toxicological studies prove the opposite.

Identification of Potential Extractablesand Leachables in Cosmetic Plastic Packagingby Microchambers-Thermal Extraction and Pyrolysis-Gas Chromatography-Mass Spectrometry

Most container-content interaction studies are carried out through migration tests on end products or simulants involving generally toxic solvents. This study was conducted with the aim of identifying potential leachables from materials used in cosmetic plastic packaging by using two approaches based on solvent-free extraction, i.e., solid-phase microextraction sampling and pyrolyzer/thermal desorption coupled with gas chromatography mass spectrometry. Volatile and semi-volatile intentionally and non-intentionally added substances were detected in seven packaging samples made of polypropylene, polyethylene, and styrene-acrylonitrile copolymer. Thirty-five compounds related to the polymers industry or packaging industry were identified, among them phthalates, alkanes, styrene, and cyanide derivates including degradation products, impurities, additives, plasticizers, and monomers. All except eight belong to the Cramer class I. These thermodesorption techniques are complementary to those used for migration tests.

Analytical Approaches for Analysis of Safety of Modern Food Packaging: A Review

Nowadays, food packaging is a crucial tool for preserving food quality and has become an inseparable part of our daily life. Strong consumer demand and market trends enforce more advanced and creative forms of food packaging. New packaging development requires safety evaluations that always implicate the application of complex analytical methods. The present work reviews the development and application of new analytical methods for detection of possible food contaminants from the packaging origin on the quality and safety of fresh food. Among food contaminants migrants, set-off migrants from printing inks, polymer degradation products, and aromatic volatile compounds can be found that may compromise the safety and organoleptic properties of food. The list of possible chemical migrants is very wide and includes antioxidants, antimicrobials, intentionally added substances (IAS), non-intentionally added substances (NIAS), monomers, oligomers, and nanoparticles. All this information collected prior to the analysis will influence the type of analyzing samples and molecules (analytes) and therefore the selection of a convenient analytical method. Different analytical strategies will be discussed, including techniques for direct polymer analysis.

GC-MS Screening for the Identification of Potential Migrants Present in Polymeric Coatings of Food Cans

The coatings used in cans can release complex chemical mixtures into foodstuffs. Therefore, it is important to develop analytical methods for the identification of these potential migrant compounds in packaged food to guarantee the compliance with European food packaging legislation and ensure consumer safety. In the present work, the type of coating in a total of twelve cans collected in Santiago de Compostela (Spain) were evaluated using an ATR (attenuated total reflectance)-FTIR spectrometer. These samples were analysed after extraction with acetonitrile in order to identify potential migrants through a screening method by gas chromatography coupled to mass spectrometry (GC-MS). A total of forty-seven volatile and semi-volatile compounds were identified in these samples, including plasticizers, photoinitiators, antioxidants, lubricants, etc. Then, in a second step, a targeted analysis was carried out for the simultaneous determination of 13 compounds, including bisphenols (BPA, BPB, BPC, BPE, BPF, BPG) and BADGEs (BADGE, BADGE.H₂O, BADGE.2H₂O, BADGE.HCl, BADGE.2HCl, BADGE.H₂O.HCl, cyclo-di-BADGE) by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) with atmospheric pressure chemical ionisation (APCI) source. Among all the bisphenols analysed, only the bisphenol A was detected in four samples; while cyclo-di-BADGE was the predominant compound detected in all the samples analysed.

Molecular Dynamics Simulation on the Diffusion of Flavor, O2 and H2O Molecules in LDPE Film

The diffusion of five flavor organic molecules, including D-limonene, myrcene, ethyl hexanoate, 2-nonanone, and linalool in low density polyethylene (LDPE) film were investigated by combined experimental and molecular dynamics (MD) simulation studies. The diffusion coefficients derived from the prediction model, experimental determination, and MD simulation were compared, and the related microscopic diffusion mechanism was investigated. The effects of the presence of the flavor organic molecules on the diffusion of O₂ and H₂O in polyethylene (PE) were also studied by MD simulation. Results show that: The diffusion of five flavor molecules in LDPE is well followed to Fick’s second law by the immersion experiment; MD simulation indicates the dual mode diffusion mechanism of the flavor molecules is in LDPE; the diffusion coefficients from MD simulation are close to those from the experimental determination, but are slightly larger than those values; the presence of the flavor organic molecules hinders the diffusion of O₂ and H₂O, which can be well explained from the fraction of free volume (FFV) and interaction energy calculation results derived from MD simulation.