Green synthesis and characterization of copper nanoparticles using Piper retrofractum Vahl extract as bioreductor and capping agent

Simple and hybrid materials for antimicrobial applications

Simple and hybrid materials represent alternatives to traditional antibiotics in the ongoing effort to combat the growing issue of antibiotic-resistant bacterial strains, which have emerged due to the misuse of antibiotic treatments and improper disposal of antibiotic-related waste. First, after outlining the scale of the issue, multiple potential agents that may help address the problem are presented. Inorganic metal-based and metal oxide-based nanomaterials such as silver, gold, gallium, zinc/zinc oxide, copper/copper oxide, titanium dioxide, and magnesium oxide nanoparticles are characterized, their synthesis is described, and examples of their potential antimicrobial applications are provided. Subsequent sections in a similar vein, explore nonmetallic inorganic nanoparticles and characterize organic materials that may function either as antimicrobial agents themselves (e.g., antimicrobial peptides, chitosan) or as structural components and drug carriers (e.g., cellulose, SNLs, liposomes). The final chapter offers examples of combining inorganic and organic materials into hybrid solutions for specialized antimicrobial applications and treatments, aiming to enhance their inherent antimicrobial properties or reduce the required dosage of antibiotics in therapy.

Green Synthesis of Copper Nanoparticles using Rosmarinus officinalis L. Extract Improves the Developmental Competence of Mouse Oocytes during in Vitro Maturation

An effective approach to enrich the in vitro maturation (IVM) of oocyte medium as one of the main assisted reproduction technologies is the use of antioxidants to minimize oxidative stress. This study examined the effects of copper nanoparticles (CuNPs) synthesized by chemical (Ch-NPs) and green (G-CuNPs) methods on the IVM process of mouse oocytes and the development of the embryo in comparison to control oocytes (without nanoparticles treatment). Hydroalcoholic (G-H-CuNPs) and aqueous (G-A-CuNPs) Rosmarinus officinalis extracts were used for green synthesis. Here, Ch-NPs showed much less nuclear maturation and survival rate (44.92 ± 4.52; 66.21 ± 6.22) than the control (73.36 ± 7.40; 89.33 ± 4.40), respectively (P < 0.001). In contrast, G-H-CuNPs treated oocytes exhibited a significant increase (72.28 ± 5.51; 79.37 ± 6.29) compared to the Ch-NPs (P < 0.05). The level of ROS in Ch-NPs exposed oocytes was significantly higher than in the control (P < 0.001). The fertilization rate exhibited a significant elevation in the G-H-CuNPs (96.00 ± 2.45) compared to the control (71.14 ± 5.20) and Ch-NPs (50.00 ± 0.01) (P < 0.05). The 8-cell and blastocyst (BL) rates in the G-H-CuNPs (70.32 ± 3.78) revealed notably higher than those in the control (64.29 ± 3.69) and Ch-NPs (36.67 ± 10.22) (P < 0.05). In summary, results exhibited that G-CuNPs promote mouse oocyte maturation, fertilization, and embryo development more than Ch-NPs. The follow-up studies propose looking into the safety and applicability of green-synthesized CuNPs in human-assisted reproductive technologies.

Nanopesticides for managing primary and secondary stored product pests: Current status and future directions

The preservation of agricultural commodities during storage is critical for ensuring food security and minimizing post-harvest losses. Both primary storage pests such as Callosobruchus maculatus, Callosobruchus chinensis, Sitophilus weevils, Rhyzopertha dominica, and Trogoderma granarium, and secondary storage pests like Tribolium castaneum cause significant damage to stored products, resulting in substantial economic losses. Traditional pest control methods, including chemical insecticides, face limitations due to environmental concerns and pest resistance. Consequently, nanoparticle-based insecticides are being extensively suggested as a promising alternative. This review analyzes the available literature on the efficacy of nanoparticles (NPs) against primary and some secondary storage pests. Green synthesis methods using plant extracts and other biological sources are highlighted for the production of environmentally friendly NPs. Studies demonstrate that NPs of alumina, carbon, silica, silver, copper, zinc oxide, nickel oxide, titanium dioxide, nano zeolite, as well as chitosan and polymers exhibit significant insecticidal activity against a variety of pests, in some cases surpassing mortality rates caused by traditional insecticides at recommended dosages. Structural, biochemical and molecular studies reveal that NPs induce oxidative stress, disrupt cellular homeostasis, and cause structural damage in pests. Histopathological evaluations indicate specific organ-related toxicity, emphasizing the need for comprehensive biosafety assessments. Additionally, the integration of NPs with conventional insecticides shows enhanced pest control efficiency, although challenges remain in standardizing synthesis methods and evaluating long-term environmental impacts. This review highlights the potential of NPs in sustainable pest management and underlines the importance of ongoing research to optimize specific formulations for specific groups of pests and ensure safety.

Synthesis of metallic nanoparticles using biometabolites: mechanisms and applications

Bio-metabolites have played a crucial role in the recent green synthesis of nanoparticles, resulting in more versatile, safer, and effective nanoparticles. Various primary and secondary metabolites, such as proteins, carbohydrates, lipids, nucleic acids, enzymes, vitamins, organic acids, alkaloids, flavonoids, and terpenes, have demonstrated strong metal reduction and stabilization properties that can be utilized to synthesize nanomaterials and influence their characters. While physical and chemical methods were previously used to synthesize these nanomaterials, their drawbacks, including high energy consumption, elevated cost, lower yield, and the use of toxic chemicals, have led to a shift towards eco-friendly, rapid, and efficient alternatives. Biomolecules act as reducing agents through deprotonation, nucleophilic reactions, transesterification reactions, ligand binding, and chelation mechanisms, which help sequester metal ions into stable metal nanoparticles (NPs). Engineered NPs have potential applications in various fields due to their optical, electronic, and magnetic properties, offering improved performance compared to bulkier counterparts. NPs can be used in medicine, food and agriculture, chemical catalysts, energy harvesting, electronics, etc. This review provides an overview of the role of primary and secondary metabolites in creating effective nanostructures and their potential applications.

A Review on Bioflocculant-Synthesized Copper Nanoparticles: Characterization and Application in Wastewater Treatment

Copper nanoparticles (CuNPs) are tiny materials with special features such as high electric conductivity, catalytic activity, antimicrobial activity, and optical activity. Published reports demonstrate their utilization in various fields, including biomedical, agricultural, environmental, wastewater treatment, and sensor fields. CuNPs can be produced utilizing traditional procedures; nevertheless, such procedures have restrictions like excessive consumption of energy, low production yields, and the utilization of detrimental substances. Thus, the adoption of environmentally approachable "green" approaches for copper nanoparticle synthesis is gaining popularity. These approaches involve employing plants, bacteria, and fungi. Nonetheless, there is a scarcity of data regarding the application of microbial bioflocculants in the synthesis of copper NPs. Therefore, this review emphasizes copper NP production using microbial flocculants, which offer economic benefits and are sustainable and harmless. The review also provides a characterization of the synthesized copper nanoparticles, employing numerous analytical tools to determine their compositional, morphological, and topographical features. It focuses on scientific advances from January 2015 to December 2023 and emphasizes the use of synthesized copper NPs in wastewater treatment.

Effects of Green Tea and Java Pepper Mixture on Gut Microbiome and Colonic MicroRNA-221/222 in Mice with Dextran Sulfate Sodium-Induced Colitis

In this study, we aimed to investigate the regulatory effects of a green tea and java pepper mixture (GTP) on the gut microbiome and microRNA (miR)-221/222 expression in mice with dextran sulfate sodium (DSS)-induced colitis. Male C57BL/6J mice were divided into four groups: DSS-, DSS+, GTP50, and GTP100. In the GTP50 and GTP100 groups, GTP was orally administered to mice at doses of 50 and 100 mg/kg body weight, respectively, every day for 2 weeks, and colitis was induced in the DSS+, GTP50, and GTP100 groups by adding 3% DSS to their drinking water for 1 week. GTP was found to mitigate the severity of inflammation and the damage to goblet cells caused by DSS-induced colitis. The results showed that compared with the DSS- group, the relative abundance of Bacteroidetes was increased and that of Proteobacteria and Candidatus Melainabacteria was decreased in the GTP100 group. The ratio of Firmicutes to Bacteroidetes was also reduced in the GTP100 group. However, GTP administration did not modulate the microbial diversity. GTP administration upregulated the mRNA and protein levels of occludin and zonula occludens 1. In addition, GTP effectively downregulated the expression of miR-221 and miR-222. Overall, GTP altered the gut microbiota composition and downregulated colonic miR-221/222 expression in mice with DSS-induced colitis.

Green synthesis of copper nanoparticles by using pineapple peel waste: in vitro characterizations and antibacterial potential

A considerable amount of fruit waste is being produced every day worldwide. The green synthesis of metal nanoparticles from fruit peel waste can be an innovative, cost-effective, and eco-friendly alternative to traditional methods. Copper nanoparticles (CuNPs) were synthesized by a green method using the pineapple peels extract (PLX) and copper sulfate pentahydrate. The formation of CuNPs was visually identified and detected by UV-Visible spectroscopy. The CuNPs were characterized by Fourier-transform infrared (FTIR) spectroscopy, particle size analyzer, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The antioxidant and reducing power of CuNPs were conducted by %DPPH scavenging and electron transfer-based ferric reducing antioxidant power (FRAP) assay, respectively. The antibacterial properties of CuNPs were determined in gram-positive, and gram-negative bacteria. The results showed that the CuNPs were spherical in shape with mean particle size 290.5 nm. The zeta potential of the nanoparticles was found to be - 12.3 mV indicating the instability in the colloidal state. The FTIR study confirmed the peaks of phytochemicals present in the PLX and the nanoparticles supporting the use of pineapple peels as stabilizing, reducing and capping agents. Both the DPPH and reducing power assay depicted that the synthesized CuNPs had significant antioxidant activity. However, the synthesized CuNPs had strong inhibitory capacity against both gram-positive and gram-negative test organisms. Thus, the CuNPS could be used for its viable antibacterial potential to preserve fruits, flowers, and vegetables from bacterial contamination.

Recent Trends in Biologically Synthesized Metal Nanoparticles and their Biomedical Applications: a Review

In recent years, biologically synthesized metal nanoparticles have emerged as a dynamic field of research with significant implications for biomedical applications. This review explores the latest trends in the synthesis of metal nanoparticles using biological methods, encompassing plant extracts and microorganisms such as bacteria, yeasts, and fungi. These innovative approaches offer a sustainable, cost-effective, and environmentally friendly alternative to conventional chemical synthesis methods. Moreover, this review delves into the multifaceted biomedical applications of biologically synthesized metal nanoparticles. These applications include drug delivery systems, diagnostics, therapeutics, and imaging technologies, showcasing the versatility and promise of these nanomaterials in addressing contemporary biomedical challenges. In addition, the review addresses the critical issue of cytotoxicity, offering insights into the safety and viability of these biologically derived NPs for medical use. The exploration of recent trends and advancements in this field underscores the transformative potential of biologically synthesized metal nanoparticles in revolutionizing biomedical research and healthcare.

Application of green synthesized Ag and Cu nanoparticles for the control of bruchids and their impact on seed quality and yield in greengram

Storage pests, particularly bruchids, are major biotic constraints causing significant storage losses in pulses. Conventional control methods relying on insecticides and fumigants often lead to food contamination due to toxic pesticide residues and a rapid decline in seed germination. In this investigation, through green nano-technological application, a promising and sustainable alternative for pest management is developed. Silver and copper nanoparticles were synthesized through ocimum leaf extract. The characterization of silver and copper nanoparticles was carried out by UV-spectroscopy, particle size analyzer, scanning electron microscopy, X-ray diffraction, and Fourier-transform infrared. Both the nanoparticles were spherical and crystalline in nature. Greengram seeds were primed with standardized silver and copper nanoparticles at different concentrations (1000, 1500, and 2000 ppm) and compared with castor-treated, deltamethrin-treated, and untreated control seeds for seed quality, growth, and yield. After one month of storage, all the pulse beetles released in different treatments exhibited 100 % mortality, whereas in control, the insects multiplied. At the end of nine months, the control seeds had shown 72 % damage and 39.67 % germination. In contrast, silver nanoparticles at 1000 ppm showed no seed damage and achieved 81.67 % germination, which was on par with copper nanoparticles at 1000 ppm with 79.33 % germination. Seed priming of silver and copper nanoparticles at 1000 ppm also demonstrated superior performance in all the seed quality and biochemical parameters (alpha amylase and catalase) throughout the storage period. Whereas, in the greenhouse experiment, enhanced growth (35.96 cm, 46.48 cm, and 53.00 cm at 30, 60 DAS, and at harvest, respectively) and yield per plant (3.75 g) were significantly higher in plants that were given foliar application with silver nanoparticles at 1000 ppm. Furthermore, foliar application of these nanoparticles at all concentrations (1000, 1500, and 2000 ppm) did not exhibit any adverse effects on soil microbial organisms, as assessed by dehydrogenase enzyme activity. Hence, this research highlights the potential use of silver and copper nanoparticles at 1000 ppm as effective tools for storage pest management and contributing to improved agricultural productivity and sustainability.

Formulation and evaluation of azithromycin-loaded silver nanoparticles for the treatment of infected wounds

Infected wounds pose a significant challenge in healthcare, requiring innovative therapeutic strategies. Therefore, there is a critical need for innovative pharmaceutical materials to improve wound healing and combat bacterial growth. This study examined the efficacy of azithromycin-loaded silver nanoparticles (AZM-AgNPs) in treating infected wounds. AgNPs synthesized using a green method with Quinoa seed extract were loaded with AZM. Characterization techniques, including X-ray Powder Diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and Uv-Vis analysis were utilized. The agar diffusion assay and determination of the MIC were used to assess the initial antibacterial impact of the formulations on both MRSA and E. coli. In addition, the antimicrobial, wound-healing effects and histological changes following treatment with the AZM-AgNPs were assessed using an infected rat model. The nanoparticles had size of 24.9 ± 15.2 nm for AgNPs and 34.7 ± 9.7 nm for AZM-AgNPs. The Langmuir model accurately characterized the adsorption of AZM onto the AgNP surface, indicating a maximum loading capacity of 162.73 mg/g. AZM-AgNPs exhibited superior antibacterial properties in vivo and in vitro compared to controls. Using the agar diffusion technique, AZM-AgNPs showed enhanced zones of inhibition against E. coli and MRSA, which was coupled with decreased MIC levels. In addition, in vivo studies showed that AZM-AgNP treated rats had the best outcome characterized by improved healing process, lower bacterial counts and superior epithelialization, compared to the control group. In conclusion, AZM-AgNPs can be synthesized using a green method with Quinoa seed with successful loading of azithromycin onto silver nanoparticles. In vitro and in vivo studies suggest the promising use of AZM-AgNPs as an effective therapeutic agent for infected wounds.

Alleviative effect of betaine against copper oxide nanoparticles-induced hepatotoxicity in adult male albino rats: histopathological, biochemical, and molecular studies

Background

Copper oxide nanoparticles (CuO-NPs) have gained interest due to their availability, efficiency, and their cost-effectiveness. Betaine is an essential methyl donor and takes part in various physiological activities inside the body; it is found to have protective and curative effects against various liver diseases. The present study aimed to evaluate the hepatotoxic effect of CuO-NPs on adult male albino rats and the ability of betaine to alleviate such hepatotoxicity.

Methods

Forty adult male albino Wister rats were grouped into 4 groups (10 rats/group): group I a negative control, group II (CuO-NPs) injected with CuO-NPs intra peritoneal by insulin needle (0.5 mg/kg/day), group III (betaine + CuO-NPs) administered betaine orally by gavage needle (250 mg/kg/day 1 h before CuO-NPs) and CuO-NPs (0.5 mg/kg/day) finally, group IV (betaine) administered betaine orally by gavage needle (250 mg/kg/day) for consecutive 28 days. Blood and liver samples were gathered and processed for biochemical, molecular, histopathological, and immunohistochemical investigations.

Results

Group II displayed a marked rise in alanine aminotransferase (ALT), aspartate aminotransferase (AST), and malondialdehyde (MDA) levels. Furthermore, there is an excessive upregulation of the inflammatory biomarkers interleukin1 beta (IL-1β) and tumor necrosis factor-alpha (TNF-α). On the other hand, substantial reduction in glutathione (GSH) levels and significant downregulation at glutathione peroxidase (GPx) mRNA gene expression. Regarding the histopathological deviations, there were severe congestion, dilatation and hyalinization of blood vessels, steatosis, hydropic degeneration, hepatocytic necrosis, increased binucleation, degenerated bile ducts, hyperplasia of ducts epithelial lining, and inflammatory cells infiltration. Immunohistochemically, there was a pronounced immunoreactivity toward IL-1β. Luckily, the pre-administration of betaine was able to mitigate these changes. MDA was dramatically reduced, resulting in the downregulation of IL-1β and TNF-α. Additionally, there was a considerable rise in GSH levels and an upregulation of GPx. Histopathological deviations were substantially improved as diminished dilatation, hyalinization and congestion of blood vessels, hepatocytes, and bile ducts are normal to some extent. In addition, IL-1β immunohistochemical analysis revealed marked decreased intensity.

Conclusion

Betaine can effectively reduce the hepatotoxicity caused by CuO-NPs via its antioxidant properties and its ability to stimulate the cell redox system.

Phytochemical Analysis of Silver Nanoparticles of Zingiber officinale and Evaluation for Its Antibacterial Property

Nonessential heavy metals are toxic to human health. In this study, mercury, a hazardous metal, was detected by colorimetric analysis using Zingiber (Z.) officinale. The eco-friendliness of this method was also emphasized. The ultraviolet (UV) spectrum is a broad peak observed at 200-250 nm in Z. officinale leaf extracts. The UV spectrum of green synthesized Z. officinale exhibited an absorption band of 286 nm, which confirms the nanoparticle (NP) synthesis. Fourier transform infrared (FTIR) analysis of the vibrational peak around 3307 cm-1 is assigned to ν(O-H) stretching that could possibly emanate from carbohydrates or phenolics. The peaks found around 2917 and 2849 cm-1 are ascribed to the -C-H stretch of the alkyl group, and the peak around 1625 cm-1 is due to the enolic β-diketones or -C = O stretch of carboxylic acids, while the corresponding -C-O stretch is observed around 1375 and 1029 cm-1. The assignment of peaks is similar. It is clear from the scanning electron microscope (SEM) image that the constituent parts were nonuniform, sphere-shaped, agglomerated, and of an average size of 30.9 nm. X-ray diffraction (XRD) analysis was used to determine the structural characteristics and crystalline nature of Z. officinale. The observed intensity peaks at 32.35°, 36.69°, 39.24°, 44.76°, 59.42°, and 67.35° are, respectively, of the Z. officinale diffraction 2θ values, which correspond to the standard database values. The synthesized copper NPs synthesized tested antibacterial properties against various strains of microorganisms, including Escherichia coli: 25 μg/mL 2.01 ± 0.11 and 100 μg/mL 5.37 ± 0.12, Staphylococcus (S.) aureus: 25 μg/mL 1.05 ± 0.71 and 100 μg/mL 11.43 ± 1.27, Streptococcus mutans: 25 μg/mL 02.01 ± 0.1 and 100 μg/mL 15.67 ± 0.17, and Enterococcus faecalis: 25 μg/mL 03.11 ± 0.7 and 100 μg/mL 18.32 ± 0.2. The short novelty of Z. officinale lies in its potential relevance to human health, as it has been found to possess bioactive compounds with various medicinal properties, such as antimicrobial, antioxidant, and anti-inflammatory activities, making it a promising natural resource for therapeutic applications.

Cu2O, ZnO, and Ag/ Cu2O nanoparticles synthesized by biogenic and chemical route and their effect on Pseudomonas aeruginosa and Candida albicans

Pseudomonas aeruginosa and Candida albicans are two important pathogens in public health due to the infections they cause in immunocompromised patients and with hospital stay, increasing morbimortality rates. Three groups of Cu2O, ZnO, and Ag/Cu2O nanoparticles were synthesized and characterized physicochemically and confronted to P. aeruginosa and C. albicans to determine their antibacterial effect. Statistical analyses were performed using Analysis of Variance (ANOVA) (p < 0.001). The structures of Cu2O, ZnO, and Ag/Cu2O nanoparticles were spherical, sized 6 nm, 10 nm, and 50 nm for Ag, Cu2, and Zn metals, respectively. Furthermore, a 100% antibacterial and antifungal effect against Pseudomonas aeruginosa and Candida albicans was observed for Cu2O, ZnO, and Ag/Cu2O nanoparticles respectively. It is concluded from these findings that the nanoparticles synthesized by biogenic and chemical route had a good size between 6 and 50 nm and that Cu2O, ZnO, and Ag/Cu2O nanoparticles presented an excellent antibacterial (100% growth inhibition) effect against P. aeruginosa and C. albicans (p < 0.001) compared to the control.

Effects of plant-based copper nanoparticles on the elimination of ciprofloxacin

Ciprofloxacin (CIP) is frequently detected in the environment and causes the emergence of drug-resistant bacteria. High levels of CIP in the environment are also harmful to humans and animals. Therefore, effective elimination of CIP is required. In this study, plant-based copper nanoparticles (CuNPs) have been fabricated for the purpose of eliminating CIP. Aqueous extracts of 6 plants were compared for their phytochemicals and reducing activity. Among all the extracts, Garcinia mangostana extract (GM) was the most potent with the highest total phenolic compounds, flavonoids, tannins, terpenoids, and reducing activity. CuNPs synthesized using GM (GM-CuNPs) were characterized using UV-VIS spectroscopy and dynamic light scattering. The results showed that the maximum absorption of GM-CuNPs was at 340 nm. The average size of GM-CuNPs is in the nanoscale range of 159.2 ± 61 nm, with a narrow size distribution and a negative zeta potential of - 4.13 ± 6.97 mV. The stability of GM-CuNPs is not solely due to their zeta potential but also phytochemicals in the extract. GM-CuNPs at 25 mM showed the highest efficiency of 95% in removing CIP from aqueous medium pH 6-7 at 25-35°C within 20 min. The results indicated that the electrostatic attraction between the negative charge of GM-CuNPs and the positive charge of CIP controlled the drug adsorption on the nanoparticles. In conclusion, the developed GM-CuNPs have excellent CIP removal efficiency. These synthesized GM-CuNPs are expected to be environmentally friendly for the removal of antibiotics and other drugs.

Green synthesis-assisted copper nanoparticles using Aegle marmelos leaves extract: physical, optical, and antimicrobial properties

In the present report, Aegle marmelos leaf powder was used to synthesize copper nanoparticles (CuNPs) using a simple and cost-effective method. A. marmelos leaves have various medicinal uses including for the treatment of diarrhoea, constipation, diabetes, cholera, skin diseases, earache, blood purification, heart problems, and so on. The plant biomolecules induce the reduction of Cu2+ ions to CuNPs and also act as a capping and stabilizing agent. The formation of CuNPs was confirmed using photoluminescence (PL) excitation and emission spectra on a Shimadzu RF-5301 PC spectrofluorophotometer and the absorbance spectra of a UV-visible spectrophotometer at different stages during the synthesis process. In addition, other properties of synthesized CuNPs were also investigated using X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy techniques. The average size of the synthesized CuNPs was in the range 20-40 nm. Furthermore, the synthesized NPs were also considered for an antimicrobial study against Gram-positive Staphylococcus aureus and Proteus, and Gram-negative Escherichia coli and Salmonella spp. using the agar well diffusion method. The zone of inhibition against the Gram-positive bacteria was greater than the zone of inhibition against the Gram-negative bacteria. These investigation results suggest that synthesized NPs are promising nanomaterials for use as antimicrobial agents.

Green synthesis and characterization of silver and copper nanoparticles and their use as an effective adsorbent for chromium removal and recovery from wastewater

Chromium (Cr) is one of the hazardous heavy metals that is naturally carcinogenic and causes various health problems. Metallic nanoparticles such as silver and copper nanoparticles (Ag NPs and Cu NPs) have gained great attention because of their unique chemical, physical, and biological attributes, serving diverse and significant role in various useful and sustainable applications. In the present study, both of these NPs were synthesized by green method in which Azadirachta indica plant extract was used. These nanoparticles were characterized by using advanced instrumental techniques such as Fourier transmission infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope attached with energy-dispersive spectroscopy (SEM-EDS), and elemental mapping. These environmentally friendly nanoparticles were utilized for the batch removal of Cr from the wastewater. For analysis of adsorption behaviour, a range of kinetic isotherm models (Freundlich, Temkin, Dubinin, and Langmuir) and kinetic models (pseudo-first-order and pseudo-second-order) were used for the Cu-NPs and Ag-NPs. Cu NPs exhibited the highest Cr removal efficiency (96%) within a contact time of 10-15 min, closely followed by Ag NPs which achieved a removal efficiency of 94% under the similar conditions. These optimal outcomes were observed at a sorbent dose of 0.5 g/L for Ag NPs and 0.7 g/L for Cu NPs. After effectively capturing Cr using these nanoparticles, the sorbates were examined through SEM-EDX analysis to observe how much Cr metal was attached to the nanoparticles, potentially for future use. The analysis found that Ag-NPs captured 18% of Cr, while Cu-NPs captured 12% from the aqueous solution. More precise experimental conditions are needed for higher Cr removal from wastewater and determination of the best conditions for industrial-level Cr reuse. Although nanomaterial exhibit high efficiency and selectivity for Cr removal and recovery from wastewater, more research is necessary to optimize their synthesis and performance for industrial-scale applications and develop efficient methods for Cr removal and recovery.

Green synthetized Cu-Oxide Nanoparticles: Properties and applications for enhancing healing of wounds infected with Staphylococcus aureus

Treating wound infections is a challenging concern in various clinical settings in Egypt, especially in the increasing global problem of resistance to antimicrobials. Here, we aimed to fabricate CuO NPs via green synthesis using aqueous Yucca gigantea extract. Then, the effect of green synthesized CuO NPs on Staphylococcus aureus clinical isolates has been studied in vivo and in vitro. The aqueous extract of Yucca gigantea has been employed in our study as a scale-up approach to safely, affordably, sustainably, and practically fabricate copper oxide nanoparticles (CuO NPs). Fourier transforms infrared (FT-IR), X-ray Diffraction (XRD), and UV-vis spectroscopy were utilized in vitro to describe the bonding features of CuO NPs.Scanning Electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X-ray (EDX), and dynamic light scattering (DLS) were used to detect the morphological and elemental composition of the resulting CuO NPs. The fabrication of CuO NPs was confirmed by the IR spectral band at 515 cm-1, ensuring the metal-oxygen bondCu-O with two strong bands at 229 and 305 nm. SEM and TEM show CuO NPs with a size range from 30 to 50 nm. Cu and O comprised most of the particles produced through green synthesis, with weight percentages of 57.82 and 42.18 %, respectively. CuO NPs were observed to have a Zeta-potential value of -15.7 mV, demonstrating their great stability. CuO NPs revealed antibacterial potential toward the tested isolates with minimum inhibitory concentration values of 128 to 512 µg/mL. CuO NPs had antibiofilm potential by crystal violet assay, downregulating the expression of icaA and icaD genes in 23.07 % and 19.32 of the S. aureus isolates. The wound-healing potential of CuO NPs was investigated in vivo. It significantly decreased the bacterial burden and increased wound healing percentage compared to the positive control group. Moreover, CuO NPs caused an upregulation of the genes encoding platelet-derived growth factor (PDGF) and fibronectin in tissue repair. Thus, we can use CuO NPs as a future source for wound healing materials, especially in infected wounds.

Biological Synthesis of Copper Nanoparticles Using Edible Plant Allium monanthum: Characterization of Antibacterial, Antioxidant, and Anti-Inflammatory Properties Using In Silico Molecular Docking Analysis

This study prepared copper nanoparticles using an edible leaf extract from A. monanthum (AM-CuNPs) via eco-friendly green synthesis techniques. The size, shape, crystalline nature and functional groups of the synthesized AM-CuNP particles were analyzed by a UV-VIS spectrophotometer and SEM, EDX, TEM, XRD and FT-IR instrumentation. The synthesized AM-CuNPs had spherical shapes with sizes in the range of 30-80 nm and were crystalline in nature. In addition, the AM-CuNPs were synthesized using various bioactive sources, including flavonoids, phenolic acids, alkaloids and sugars that were present in an aqueous broth of A. monanthum. Furthermore, the AM-CuNPs possessed good antibacterial properties against selected major disease-causing pathogenic bacteria, such as E. coli, Salmonella typhi, Pseudomonas aeruginosa and Staphylococcus aureus. The antioxidant activity of AM-CuNPs exhibited potent free radical scavenging activities in DPPH, ABTS and H2O2 radical assays. In addition, in silico analysis of the AM-CuNPs was performed, including ADME prediction, and molecular simulation docking on the secondary metabolites identified in the edible plant extract was used to evaluate their anti-inflammatory applications. In particular, the molecular docking scores showed that alliin, apigenin, isorhamnetin, luteolin and myricetin have sufficient binding energy and top values as inhibitors of the protein target involved in the inflammation signaling cascade.

Biogenic Nanoparticles Silver and Copper and Their Composites Derived from Marine Alga Ulva lactuca: Insight into the Characterizations, Antibacterial Activity, and Anti-Biofilm Formation

Bacterial pathogens cause pain and death, add significantly to the expense of healthcare globally, and pose a serious concern in many aspects of daily life. Additionally, they raise significant issues in other industries, including pharmaceuticals, clothing, and food packaging. Due to their unique properties, a great deal of attention has been given to biogenic metal nanoparticles, nanocomposites, and their applications against pathogenic bacteria. This study is focused on biogenic silver and copper nanoparticles and their composites (UL/Ag2 O-NPS, Ul/CuO-NPs, and Ul/Ag/Cu-NCMs) produced by the marine green alga Ulva lactuca. The characterization of biogenic nanoparticles UL/Ag2 O-NPS and Ul/CuO-NPs and their composites Ul/Ag/Cu-NCMs has been accomplished by FT-IR, SEM, TEM, EDS, XRD, and the zeta potential. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) experiments were conducted to prove antibacterial activity against both Gram-positive and Gram-negative bacteria and anti-biofilm. The FTIR spectroscopy results indicate the exiting band at 1633 cm-1, which represents N-H stretching in nanocomposites, with a small shift in both copper and silver nanoparticles, which is responsible for the bio-reduction of nanoparticles. The TEM image reveals that the Ul/Ag/Cu-NCMs were hexagonal, and the size distribution ranged from 10 to 35 nm. Meanwhile, Ul/CuO-NPs are rod-shaped, whereas UL/Ag2 O-NPS are spherical. The EDX analysis shows that Cu metal was present in a high weight percentage over Ag in the case of bio-Ag/Cu-NCMs. The X-ray diffraction denotes that Ul/Ag/Cu-NCMs, UL/CuO-NPs, and UL/Ag2 O-NPS were crystalline. The results predicted by the zeta potential demonstrate that Ul/Ag/Cu-NCMs were more stable than Ul/CuO-NPs. The antibacterial activity of UL/Ag2 O-NPS, Ul/Ag/Cu-NCMs, and UL/CuO-NPs was studied against eleven Gram-negative and Gram-positive multidrug-resistant bacterial species. The maximum inhibition zones were obtained with UL/Ag2 O-NPS, followed by Ul/Ag/Cu-NCMs and Ul/CuO-NPs in all the tested bacteria. The maximum anti-biofilm percentage formed by E. coli KY856933 was obtained with UL/Ag2 O-NPS. These findings suggest that the synthesized nanoparticles might be a great alternative for use as an antibacterial agent against different multidrug-resistant bacterial strains.

Biogenic production of silver, zinc oxide, and cuprous oxide nanoparticles, and their impregnation into textiles with antiviral activity against SARS-CoV-2

Nanotechnology is being used to fight off infections caused by viruses, and one of the most outstanding nanotechnological uses is the design of protective barriers made of textiles functionalized with antimicrobial agents, with the challenge of combating the SARS-CoV-2 virus, the causal agent of COVID-19. This research is framed within two fundamental aspects: the first one is linked to the proposal of new methods of biogenic synthesis of silver, cuprous oxide, and zinc oxide nanoparticles using organic extracts as reducing agents. The second one is the application of nanomaterials in the impregnation (functionalization) of textiles based on methods called "in situ" (within the synthesis), and "post-synthesis" (after the synthesis), with subsequent evaluation of their effectiveness in reducing the viral load of SARS-CoV-2. The results show that stable, monodisperse nanoparticles with defined geometry can be obtained. Likewise, the "in situ" impregnation method emerges as the best way to adhere nanoparticles. The results of viral load reduction show that 'in situ' textiles with Cu2O NP achieved a 99.79% load reduction of the SARS-CoV-2 virus.

Wound healing performance of PVA/PCL based electrospun nanofiber incorporated green synthetized CuNPs and Quercus infectoria extracts

In this study, copper nanoparticles (CuNPs) were synthetized through green chemistry approach using C. officinalis flowers extract. The biosynthetized nanoparticles were characterized by FESEM, XRD, DLS and FTIR analysis. Subsequently, PCL nanofiber was fabricated as first supportive layer by electrospinning method. Afterward, PVA/Quercus infectoria galls (QLG) extracts/biosynthetized CuNPs blending solution was electrospinned as second bioactive topical layer. The morphology, physicochemical properties and biological characteristics of the produced PCL, PCL/PVA, PCL/PVA/CuNPs, PCL/PVA/QLG and PCL/PVA/QLG/CuNPs were investigated. Eventually, in vivo wound healing effectiveness was examined. Histologic investigation was carried out for visualization of the healing wounds architecture in different treated groups. FESEM, XRD and DLS assays confirmed the successful synthesis of CuNPs in range of 40-70 nm and FTIR spectrum approve the presence of functional constituents of C. officinalis extract on synthesized CuNPs. The incorporation of CuNPs and QLG extract into PCL/PVA based nanofibers improved their biological capabilities and physicochemical properties. Furthermore, PCL/PVA/QLG/CuNPs illustrated significant wound healing potentials and excellent antibacterial function against at wounds infected with MRSA. Histological assay demonstrated complete wound healing and less inflammation on day 10th. These outcomes recommended the utilization of PCL/PVA/QLG/CuNPs as a novel promising wound dressings with considerable antibacterial features.

Cu2O nanoparticles synthesized by green and chemical routes, and evaluation of their antibacterial and antifungal effect on functionalized textiles

The potential for the application of metal-containing nanomaterials at the nanoscale promotes the opportunity to search for new methods for their elaboration, with special attention to those sustainable methods. In response to these challenges, we have investigated a new method for green synthesis of cuprous oxide nanoparticles (Cu₂O NPs) using Myrciaria dubia juice as an organic reductant and, comparing it with chemical synthesis, evaluating in both cases the influence of the volume of the organic (juice) and chemical (ascorbic acid) reductants, for which a large number of techniques such as spectrophotometry, EDX spectrometry, TEM, SEM, DLS, FTIR spectroscopy have been used. Likewise, the nanomaterial with better morphological characteristics, stability, and size homogeneity has been applied in the functionalization of textiles by means of in situ and post-synthesis impregnation methods. The success of the synthesis process has been demonstrated by the antimicrobial activity (bacteria and fungi) of textiles impregnated with Cu₂O NPs.

Carbon dots decorated magnetite nanocomposite obtained using yerba mate useful for remediation of textile wastewater through a photo-Fenton treatment: Ilex paraguariensis as a platform of environmental interest-part 2

Two carbon dots (CD) with diameters of 4.9 ± 1.5 and 4.1 ± 1.2 nm were successfully synthesized through an acid ablation route with HNO₃ or H₂SO₄, respectively, using Ilex paraguariensis as raw material. The CD were used to produce magnetite-containing nanocomposites through two different routes: hydrothermal and in situ. A thorough characterization of the particles by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), dynamic light scattering (DLS), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) indicates that all nanomaterials have spherical-like morphology with a core-shell structure. The composition of this structure depends on the route used: with the hydrothermal route, the shell is composed of the CD, but with the in situ process, the CD act as nucleation centers, and so the iron oxide domains are in the shell. Regarding the photocatalytic mechanism for the degradation of methyl orange, the interaction between the CD and the magnetite plays an important role in the photo-Fenton reaction at pH 6.2, in which ligand-to-metal charge transfer processes (LTMCT) allow Fe²⁺ regeneration. All materials (100 ppm) showed catalytic activity in the elimination of methyl orange (8.5 ppm), achieving discoloration of up to 98% under visible irradiation over 400 nm in 7 h. This opens very interesting possibilities for the use of agro-industrial residues for sustainable synthesis of catalytic nanomaterials, and the role of the interaction of iron-based catalysts with organic matter in heterogeneous Fenton-based processes.

Biogenic Synthesis of Copper-Based Nanomaterials Using Plant Extracts and Their Applications: Current and Future Directions

Plants have been used for multiple purposes over thousands of years in various applications such as traditional Chinese medicine and Ayurveda. More recently, the special properties of phytochemicals within plant extracts have spurred researchers to pursue interdisciplinary studies uniting nanotechnology and biotechnology. Plant-mediated green synthesis of nanomaterials utilises the phytochemicals in plant extracts to produce nanomaterials. Previous publications have demonstrated that diverse types of nanomaterials can be produced from extracts of numerous plant components. This review aims to cover in detail the use of plant extracts to produce copper (Cu)-based nanomaterials, along with their robust applications. The working principles of plant-mediated Cu-based nanomaterials in biomedical and environmental applications are also addressed. In addition, it discusses potential biotechnological solutions and new applications and research directions concerning plant-mediated Cu-based nanomaterials that are yet to be discovered so as to realise the full potential of the plant-mediated green synthesis of nanomaterials in industrial-scale production and wider applications. This review provides readers with comprehensive information, guidance, and future research directions concerning: (1) plant extraction, (2) plant-mediated synthesis of Cu-based nanomaterials, (3) the applications of plant-mediated Cu-based nanomaterials in biomedical and environmental remediation, and (4) future research directions in this area.

Effects of Cabya (Piper retrofractum Vahl.) Fruit Developmental Stage on VOCs

The differences in VOCs can affect the flavor and medicinal value of cabya, and the flavor changes that occur in stages as the fruit develops are currently unknown. In order to investigate the influence of the developmental stage on the aroma composition of cabya essential oil, VOCs at each of the four developmental stages were analyzed by steam distillation (SD) extraction combined with GC-MS detection. The similarities and differences in fruit composition among the developmental stages were evaluated using hierarchical cluster analysis (HCA) and principal component analysis (PCA). A total of 60 VOCs, mainly alcohols, alkenes and alkanes, were identified across all of the developmental stages. The most acidic substances were detected in phase A and have a high medicinal value. There was no significant difference between the B and C phases, and the alcohols in those phases mainly promoted terpenoid synthesis in the D phase. Constituents during the D phase were mainly alkenes, at 57.14%, which contributed significantly to the aroma of the essential oil. PCA and HCA both were able to effectively differentiate the cabya fruit developmental stages based on the SD-GC-MS data. In summary, this study investigated the flavor variation characteristics and the diversity of VOCs in cabya fruits at different developmental stages, and its findings can provide a reference for developing essential oil products for different uses and determining appropriate stages for harvesting cabya resources.

Iron oxide nanoparticles embedded in organic microparticles from Yerba Mate useful for remediation of textile wastewater through a photo-Fenton treatment: Ilex paraguariensis as a platform of environmental interest - Part 1

Seven composites of iron oxide nanoparticles embedded in organic microparticles mediated by Cu(II) were synthesized using yerba mate (Ilex paraguariensis) dry leaf extract as precipitant, capping agent, and dispersant medium, using different Cu/Fe molar ratios. A thorough characterization of the particles by transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis-mass spectrometry (TGA-MS), Fourier transform infrared spectrometer (FTIR), and atomic absorption-spectrometry (AA) indicates that all materials have spheric-like morphology with nanoparticles composed by metal oxide phases embedded into organic microparticles. Interestingly, this organic matter is proposed to play an important role in the solids' photocatalytic activity in a photo-Fenton reaction, in which iron photo-leaching was elucidated, and a mechanism through ligand-to-metal charge transfer processes was proposed. All materials showed catalytic activity in the methyl orange elimination, achieving discolorations up to 96% in 2 h under UV irradiation at 375 nm. An experimental correlation between all samples' UV/Vis spectra and their performances for methyl orange discoloration was observed. This process opens a landscape very interesting for the use of agroindustrial residues for green synthesis of metal oxide nanomaterials and their use and understanding of organo-metallic systems participation in Fenton-based processes.

Green Tea Extract Containing Piper retrofractum Fruit Ameliorates DSS-Induced Colitis via Modulating MicroRNA-21 Expression and NF-κB Activity

The aim of the present study was to examine the effect of green tea extract containing Piper retrofractum fruit (GTP) on dextran-sulfate-sodium (DSS)-induced colitis, the regulatory mechanisms of microRNA (miR)-21, and the nuclear factor-κB (NF-κB) pathway. Different doses of GTP (50, 100, and 200 mg/kg) were administered orally once daily for 14 days, followed by GTP with 3% DSS for 7 days. Compared with the DSS-treated control, GTP administration alleviated clinical symptoms, including the disease activity index (DAI), colon shortening, and the degree of histological damage. Moreover, GTP suppressed miR-21 expression and NF-κB activity in colon tissue of DSS-induced colitis mice. The mRNA levels of inflammatory mediators, such as tumor necrosis factor-alpha (TNF-α), interleukin 6 (IL-6), interleukin-1β (IL-1β), inducible nitric oxide synthase (iNOS), and cyclooxygenase-2 (COX-2), were downregulated by GTP. Colonic nitric oxide (NO) and prostaglandin E2 (PGE2) production, and myeloperoxidase (MPO) activity were also lowered by GTP. Taken together, our results revealed that GTP inhibits DSS-induced colonic inflammation by suppressing miR-21 expression and NF-κB activity, suggesting that it may be used as a potential functional material for improving colitis.

Plant Extract-Based Synthesis of Metallic Nanomaterials, Their Applications, and Safety Concerns

Nanotechnology has attracted the attention of researchers from different scientific fields because of the escalated properties of nanomaterials compared with the properties of macromolecules. Nanomaterials can be prepared through different approaches involving physical and chemical methods. The development of nanomaterials through plant-based green chemistry approaches is more advantageous than other methods from the perspectives of environmental safety, animal, and human health. The biomolecules and metabolites of plants act as reducing and capping agents for the synthesis of metallic green nanomaterials. Plant-based synthesis is a preferred approach as it is not only cost-effective, easy, safe, clean, and eco-friendly but also provides pure nanomaterials in high yield. Since nanomaterials have antimicrobial and antioxidant potential, green nanomaterials synthesized from plants can be used for a variety of biomedical and environmental remediation applications. Past studies have focused mainly on the overall biogenic synthesis of individual or combinations of metallic nanomaterials and their oxides from different biological sources, including microorganisms and biomolecules. Moreover, from the viewpoint of biomedical applications, the literature is mainly focusing on synthetic nanomaterials. Herein, we discuss the extraction of green molecules and recent developments in the synthesis of different plant-based metallic nanomaterials, including silver, gold, platinum, palladium, copper, zinc, iron, and carbon. Apart from the biomedical applications of metallic nanomaterials, including antimicrobial, anticancer, diagnostic, drug delivery, tissue engineering, and regenerative medicine applications, their environmental remediation potential is also discussed. Furthermore, safety concerns and safety regulations pertaining to green nanomaterials are also discussed. This article is protected by copyright. All rights reserved.

In vitro embryotoxicity and mode of antibacterial mechanistic study of gold and copper nanoparticles synthesized from Angelica keiskei (Miq.) Koidz. leaves extract

The present study demonstrated the in vitro embryotoxicity assessment of gold nanoparticles (AuNPs) and copper nanoparticles (CuNPs) prepared from the leaves extract of Angelica keiskei (Miq.) Koidz. and addressed their mode of antibacterial mechanisms. Both AuNPs and CuNPs were rapidly synthesized and the formations were observed within 1 h and 24 h, respectively. Further the morphological images of the nanoparticles were confirmed through transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). The high-resolution X-ray diffraction (HR-XRD) analysis of the biosynthesized AuNPs and CuNPs were matched with joint committee on powder diffraction standards (JCPDS) file no of 04-0784 and 89-5899, respectively. A strong prominent Au and Cu signals were observed through energy dispersive spectroscopy (EDS) analysis. Fourier transform infrared spectroscopy (FT-IR) analysis confirmed the responsible phytochemicals for the synthesis of AuNPs and CuNPs. In order to assess the toxic effects of AuNPs and CuNPs, bactericidal activity was performed against few of the test pathogens in which the effective inhibition was observed against Gram-negative bacteria than the Gram-positive bacteria. The mode of action and interaction of nanoparticles were performed on the bacterial pathogens and the results concluded that the interaction of nanoparticles initially initiated on the surface of the cell wall adherence followed by ruptured the cells and caused the cell death. In addition to the antibacterial activity, in vitro embryotoxicity studies were performed against zebrafish embryos and the results confirmed that 200 µg/ml concentration of AuNPs showed the embryotoxicity, whereas 2 µg/ml of CuNPs resulted the embryotoxicity. Furthermore, the morphological anomalies of zebrafish embryos revealed the toxic nature of the synthesized nanoparticles.

Phytosynthesis of Copper Nanoparticles Using Extracts of Spices and Their Antibacterial Properties

To prevent microbial growth, chemical solvents are typically utilized. However, chemical solvents are hazardous to human health with low antimicrobial effects. Metallic-element (such as copper, silver, and gold) nanoparticles have many applications in biotechnology and biomedicine. Copper nanoparticles (CuNPs) are efficient owing to their antimicrobial, anti-inflammatory, and anti-proliferative properties. The objective of this study was to perform biogenic synthesis of copper nanoparticles using three different spices (star anise, seed of Illicium verum; nutmeg, seed of Myristica fragrans; and mace, membrane covering the seed of Myristica fragrans) and determine their antibacterial properties. CuNPs of spices were prepared by dissolving copper sulfate in the respective plant extract. They were then characterized by UV-Vis spectroscopy, FTIR, GC-MS, EDAX, and SEM analysis. Results of UV-Vis spectroscopy showed the maximum absorbance peak at 350 nm. SEM analysis showed that the sizes of these CuNPs were in the range of 150–200 nm. EDAX analysis confirmed the presence of copper and oxygen and revealed that copper existed in an oxidized form. FTIR spectroscopy showed the presence of different functional groups in these synthesized nanoparticles. GC-MS analysis revealed compounds such as Anethole D-limonene, heptadecanoic acid, 16-methyl-, methyl ester, myristene, methyl eugenol, and methyl stearate, indicating the presence of functional groups. The antibacterial activities of the three extracts from spices were analyzed using growth zone inhibition and TLC-bioautography methods. The results showed that star anise spice extract had the highest antibacterial activity. These results indicate that such CuNPs phyto-formulated with spice extracts having antibacterial properties could be used as potential therapeutics for microbial diseases.

A review of green methods for phyto-fabrication of hematite (α-Fe2O3) nanoparticles and their characterization, properties, and applications

The aim of the current work is the introduction of a quick and simple literature survey about the bio-fabrication of the Alpha Hematite nanoparticles (α-Fe₂O₃) using the plant extracts green method. The survey manifested the utilities of the environmentally friendly biosynthesis methods via extracting different plant species, some of its important physicochemical properties, various instrumental analysis characterization tools, and potential applications.