Highly selective electrochemical detection of ciprofloxacin using reduced graphene oxide/poly(phenol red) modified glassy carbon electrode

Recent advances in electrochemical sensing and remediation technologies for ciprofloxacin

Ciprofloxacin (CIP) is an extensively used broad-spectrum, fluoroquinolone antibiotic used for treating diverse bacterial infections. Effluent treatment plants (ETPs) worldwide lack technologies to detect or remediate antibiotics. CIP reaches the aquatic phase primarily due to inappropriate disposal practices, lack of point-of-use sensing, and preloaded activated charcoal filter at ETPs. The co-existence of bacteria and CIP in such aqueous pools has promoted fluoroquinolone resistance in bacteria and should be minimized. The worldwide accepted standard detection methodologies for the detection of CIP are high-performance liquid chromatography and mass spectrometry, which are lab-based, require state-of-the-art equipment, and are expensive. Hence, it is difficult to integrate them for on-site monitoring. Further, the current remediation technologies like conventional sludge-treatment techniques fail to remove antibiotics such as CIP. Several point-of-use technologies for the detection of CIP are being investigated. These typically involve the development of electrochemical sensors where substrates, modifiers, biorecognition elements, and their chemistries are designed and optimized to enable robust, point-of-use detection of CIP. Similarly, remediation techniques like adsorption, membrane filtration, ion exchange, photocatalysis, ozonation, oxidation by Fenton's reagent, and bioremediation are explored, but their onsite use is limited. The use of these sensing and remediation technologies in tandem is possibly the only way the issues related to antimicrobial resistance may be effectively tackled. This article provides a focused critical review on the recent advances in the development of such technologies, laying out the prospects and perspectives of their synergistic use to curb the menace of AMR and preserve antibiotics.

Research Progress of Biosensor Based on Organic Photoelectrochemical Transistor

In order to solve the food safety problem better, it is very important to develop a rapid and sensitive technology for detecting food contamination residues. Organic photoelectrochemical transistor (OPECT) biosensor rely on the photovoltage generated by a semiconductor upon excitation by light to regulate the conductivity of the polymer channels and realize biosensor analysis under zero gate bias. This technology integrates the excellent characteristics of photoelectrochemical (PEC) bioanalysis and the high sensitivity and inherent amplification ability of organic electrochemical transistor (OECT). Based on this, OPECT biosensor detection has been proven to be superior to traditional biosensor detection methods. In this review, we summarize the research status of OPECT biosensor in disease markers and food residue analysis, the basic principle, classification, and biosensing mechanism of OPECT biosensor analysis are briefly introduced, and the recent applications of biosensor analysis are discussed according to the signal strategy. We mainly introduced the OPECT biosensor analysis methods applied in different fields, including the detection of disease markers and food hazard residues such as prostate-specific antigen, heart-type fatty acid binding protein, T-2 toxin detection in milk samples, fat mass and objectivity related protein, ciprofloxacin in milk. The OPECT biosensor provides considerable development potential for the construction of safety analysis and detection platforms in many fields, such as agriculture and food, and hopes to provide some reference for the future development of biosensing analysis methods with higher selectivity, faster analysis speed and higher sensitivity.

Disposable electrochemical sensors based on reduced graphene oxide/polyaniline/poly(alizarin red S)-modified integrated carbon electrodes for the detection of ciprofloxacin in milk

An electrochemical sensor based on an electroactive nanocomposite was designed for the first time consisting of electrochemically reduced graphene oxide (ERGO), polyaniline (PANI), and poly(alizarin red S) (PARS) for ciprofloxacin (CIPF) detection. The ERGO/PANI/PARS-modified screen-printed carbon electrode (SPCE) was constructed through a three-step electrochemical protocol and characterized using FTIR, UV-visible spectroscopy, FESEM, CV, LSV, and EIS. The new electrochemical CIPF sensor demonstrated a low detection limit of 0.0021 μM, a broad linear range of 0.01 to 69.8 μM, a high sensitivity of 5.09 μA/μM/cm2, and reasonable selectivity and reproducibility. Moreover, the ERGO/PANI/PARS/SPCE was successfully utilized to determine CIPF in milk with good recoveries and relative standard deviation (< 5%), which were close to those with HPLC analysis.

Harnessing Graphene-Modified Electrode Sensitivity for Enhanced Ciprofloxacin Detection

Increased evidence has documented a direct association between Ciprofloxacin (CFX) intake and significant disruption to the normal functions of connective tissues, leading to severe health conditions (such as tendonitis, tendon rupture and retinal detachment). Additionally, CFX is recognized as a potential emerging pollutant, as it seems to impact both animal and human food chains, resulting in severe health implications. Consequently, there is a compelling need for the precise, swift and selective detection of this fluoroquinolone-class antibiotic. Herein, we present a novel graphene-based electrochemical sensor designed for Ciprofloxacin (CFX) detection and discuss its practical utility. The graphene material was synthesized using a relatively straightforward and cost-effective approach involving the electrochemical exfoliation of graphite, through a pulsing current, in 0.05 M sodium sulphate (Na2SO4), 0.05 M boric acid (H3BO3) and 0.05 M sodium chloride (NaCl) solution. The resulting material underwent systematic characterization using scanning electron microscopy/energy dispersive X-ray analysis, X-ray powder diffraction and Raman spectroscopy. Subsequently, it was employed in the fabrication of modified glassy carbon surfaces (EGr/GC). Linear Sweep Voltammetry studies revealed that CFX experiences an irreversible oxidation process on the sensor surface at approximately 1.05 V. Under optimal conditions, the limit of quantification was found to be 0.33 × 10-8 M, with a corresponding limit of detection of 0.1 × 10-8 M. Additionally, the developed sensor's practical suitability was assessed using commercially available pharmaceutical products.

Biogenic synthesis of ZnO and Al2O3 nanoparticles using Camellia sinensis and Origanum vulgare L. leaves extract for spectroscopic estimation of ofloxacin and ciprofloxacin in commercial formulations

The current study describes the biogenic synthesis of two metal oxides zinc oxide (ZnO), aluminum oxide (Al2O3) nanoparticles using Camellia sinensis, and Origanum vulgare L. leaves extract, respectively. The synthesized metal oxide nanoparticles were investigated using spectroscopic and microscopic techniques to confirm the formation of their nanostructures. Accurate and precise spectrofluorometric probes were proposed for the quantification of Ofloxacin (OFX) and Ciprofloxacin (CPFX) in their bulk and commercial formulations. The extraordinary properties of Zinc oxide and aluminum oxide nanoparticles (ZnONPs and Al2O3NPs) enhance the fluorescence intensity in the presence of 0.5 mL and 1.0 mL of sodium dodecyl sulfate (SDS, 1.0% w/v) as organizing agent for the detection of OFX and CPFX, respectively. The optical detection of both drugs at λex/em range 250-700 nm displayed linearity with a main correlation coefficient >0.999 at 1-300 (OFX-SDS-ZnONPs) and 0.5-100 (OFX-SDS-Al2O3NPs) ng mL-1,10-400 (CPFX-SDS-ZnONPs) and 0.1-50 (CPFX-SDS-Al2O3NPs) ng mL-1. The detection and quantification limits were found to be 0.04, 0.03, and 0.02, 0.04 ng mL-1, 0.13, 0.10, and 7.24, 0.09 ng mL-1 for the above-mentioned fluorescence systems, respectively. The suggested spectrofluorometric probes were validated and potentially applied for the estimation of OFX and CPFX in their bulk and commercial formulations.

A novel electrochemical aptasensor based on eco-friendly synthesized titanium dioxide nanosheets and polyethyleneimine grafted reduced graphene oxide for ultrasensitive and selective detection of ciprofloxacin

Developing a rapid, sensitive, and efficient analytical method for the trace-level determination of highly concerning antibiotic ciprofloxacin (CIP) is desirable to guarantee the safety of human health and ecosystems. In this work, a novel electrochemical aptasensor based on polyethyleneimine grafted reduced graphene oxide and titanium dioxide (rGO/PEI/TiO2) nanocomposite was constructed for ultrasensitive and selective detection of CIP. Through the in-situ electrochemical oxidation of Ti3C2Tx nanosheets, TiO2 nanosheets with good electrochemical response were prepared in a more convenient and eco-friendly method. The prepared TiO2 nanosheets promote charge transferring on electrode interface, and [Fe(CN)6]3-/4- as electrochemical active substance can be electrostatically attracted by rGO/PEI. Thus, electrochemical detection signal of the aptasensor variates a lot after specific binding with CIP, achieving working dynamic range of 0.003-10.0 μmol L-1, low detection limit down to 0.7 nmol L-1 (S/N = 3) and selectivity towards other antibiotics. Additionally, the aptasensor exhibited good agreement with HPLC method at 95% confidence level, and achieved good recoveries (96.8-106.3%) in real water samples, demonstrating its suitable applicability of trace detection of CIP in aquatic environment.

CO2-plasma surface treatment of graphite sheet electrodes for detection of chloramphenicol, ciprofloxacin and sulphanilamide

Graphite sheet (GS) electrodes are flexible and versatile substrates for sensing electrochemical; however, their use has been limited to incorporate (bio)chemical modifiers. Herein, we demonstrated that a cold (low temperature) CO2 plasma treatment of GS electrodes provides a substantial improvement of the electrochemical activity of these electrodes due to the increased structural defects on the GS surface as revealed by Raman spectroscopy (ID/IG ratio), and scanning electron microscopy images. XPS analyses confirmed the formation of oxygenated functional groups at the GS surface after the plasma treatment that are intrinsically related to the substantial increase in the electron transfer coefficient (K0 values increased from 1.46 × 10-6 to 2.09 × 10-3 cm s-1) and with reduction of the resistance to charge transfer (from 129.8 to 0.251 kΩ). The improved electrochemical activity of CO2-GS electrodes was checked for the detection of emerging contaminant species, such as chloramphenicol (CHL), ciprofloxacin (CIP) and sulphanilamide (SUL) antibiotics, at around + 0.15, + 1.10 and + 0.85 V (versus Ag/AgCl), respectively, by square wave voltammetry. Limit of detection values in the submicromolar range were achieved for CHL (0.08 μmol L-1), CIP (0.01 μmol L-1) and SFL (0.11 μmol L-1), which enabled the sensor to be successfully applied to natural waters and urine samples (recovery values from 85 to 119%). The CO2-GS electrode is highly stable and inexpensive ($0.09 each sensor) and can be easily inserted in portable 3D printed cells for environmental on-site analyses.

Conducting dyes as electro-active monomers and polymers for detecting analytes in biological and environmental samples

Currently, electrochemical sensors are regarded as an efficient tool for the biological and environmental sensing. Electrochemical sensors, such as voltammetric, amperometric, and impedimetric sensors, have gained great attention due to their simplicity, sensitivity, and selectivity. The performance of these electrochemical sensors could be enhanced by surface engineered nano/micro structured materials with conducting dyes/redox species. In this review, a great focus has been put on the redox-active dyes because of their electronic, optical, electrochromic, and conductivity properties. The mechanisms of oxidation and subsequent polymerization of different redox-active dyes at the surface of electrodes have been studied. Additionally, their role in catalyzing the oxidation or reduction of the target analytes at the surfaces of electrodes has also been highlighted. The redox-active dyes were used as electrochemical probes for detecting various analytes in biological and environmental samples. Overall, redox-active dyes are considered promising conducting polymers for the assessment of many analytes such as drugs, pesticides, surfactants, and heavy metal ions.

Electrochemical Sensor Based on the Hierarchical Carbon Nanocomposite for Highly Sensitive Ciprofloxacin Determination

A new voltammetry method for the highly sensitive antibacterial drug ciprofloxacin (CIP) is presented using glassy carbon electrodes modified with hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo-GCE). The use of a modified glassy carbon electrode in the form of hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo) led to an LOD value as low as 6.0 µmol L-1 with a measurement sensitivity of 3.33 µA µmol L-1. The described procedure was successfully applied for CIP determination in samples with complex matrices, such as urine or plasma, and also in pharmaceutical products and antibiotic discs with satisfactory recovery values ranging between 94-104%. The proposed electrode was characterised by great stability, with the possibility of use for about 4 weeks without any significant change in the CIP peak current. The repeatability of the CIP response on the eCNF/CNT/NiCo/GC is also very good; its value measured and expressed as RSD is equal to 2.4% for a CIP concentration of 0.025 µmol L-1 (for 7 consecutive CIP voltammogram registrations). The procedure for electrode preparation is quick and simple and does not involve the use of expensive apparatus.

Recent trends on electrochemical determination of antibiotic Ciprofloxacin in biological fluids, pharmaceutical formulations, environmental resources and foodstuffs: Direct and indirect approaches

In the last few decades, pharmaceuticals, credited with saving millions of lives, have emerged as a new class of environmental contaminants. These compounds can have both chronic and acute harmful effects on aquatic ecosystems and consequently on human health. Therefore, there is an urgent need for the development of extremely sensitive, portable, and low-cost devices to perform analysis. In the present review article, recent reports on the application of various voltammetric and photo-electrochemical techniques using different electrode materials for the determination of antibiotic Ciprofloxacin (CIPRO) are reported. This review provides an insight into direct and indirect electrochemical approaches as well as the photoelectrochemical methods used for the determination of CIPRO. Emphasis is put on the applications of unmodified and modified carbon-based electrodes considering the modifier, supporting electrolytes, analytical method, concentration range, limit of detection, and real matrices. Carbon-based electrodes are the most used materials attributed to their commercial availability, reduced cost, high chemical stability, and non-toxicity.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Electrochemical-assisted ultraviolet light coupled peroxodisulfate system to degrade ciprofloxacin in water: Kinetics, mechanism and pathways

The persulfate advanced oxidation is an emerging and efficient pollutant treatment method, but usually requires the help of other materials or energy to catalyze and produce highly oxidizing active substances. In this paper, electrochemical-assisted ultraviolet light coupled peroxodisulfate system (E-UV-PDS) was used to degrade ciprofloxacin (CIP), and it was determined that electrolysis and ultraviolet photolysis were synergistic by calculation. The effects of initial pH, voltage, peroxodisulfate dosage, CIP concentration and coexisting anions on the degradation process were explored. The quenching experiments showed that ¹O₂, ⋅OH and SO₄^-⋅ were the main active oxygen species. Under the following conditions, ultraviolet light = 6 W, voltage = 4 V, [peroxodisulfate] = 20 mM, [pH]₀ = 7 and [CIP] = 100 mgL^-1, the degradation rate of CIP reached about 100% after 120 min, and the influence of inorganic anions was also discussed. Several intermediate products were identified by LC-MS, and three degradation pathways were speculated for CIP degradation. Finally, economic evaluation of the E-UV-PDS system was made, and it was useful to construct environmentally friendly and low-cost catalytic processes for the efficient degradation of organic pollutants.

Adsorptive stripping voltammetric determination of chloramphenicol residues in milk samples using reduced graphene oxide sensor

In this paper, the electrochemical response of chloramphenicol (CHL) was investigated on a bare glassy carbon electrode (GCE) and after modification with reduced graphene oxide (GCE/rGO). Preliminary studies by cyclic voltammetry demonstrated an adsorption-controlled mass transport regime of CHL species and a pH-dependent behavior on both electrode surfaces. An adsorptive stripping differential pulse voltammetry (AdSDPV) method was proposed and under optimized instrumental conditions, a comparison of the analytical characteristics of both sensors was performed. The GCE/rGO sensor showed an increase in sensitivity (10-fold), and an anticipation of the reduction potential (200 mV), compared to the bare electrode, due to the adsorptive character (pre-concentration of the CHL species) and the electrocatalytic effect of the nanomaterial. The method was applied to skimmed and whole milk samples, which were simply diluted (50-fold) in supporting electrolyte. The results by AdSDPV using GCE/rGO showed adequate detectability (0.22 μmol L^-1), good precision with a 6% relative standard deviation (RSD) and satisfactory recovery ranging from 93 to 108%. The obtained results were statistically similar (95% confidence level) with those performed through ultra-fast liquid chromatography (UFLC). Furthermore, the sensor showed an improvement in the analytical performance for CHL detection, when compared to other sensors reported in the literature. Therefore, the developed method is reliable and promising for implementation in monitoring CHL residues in milk samples.

An enhanced fluorescent probe through the strategy of using MgWO4 nanosheets to enhance terbium ion luminescence for highly sensitive and point-of-care visual quantitative testing of ciprofloxacin integrated with a low-cost smartphone-based platform

In this work, MgWO₄ nanosheets have been successfully synthesized by a simple hydrothermal method, and the morphology and composition of the MgWO₄ nanosheets are characterized by SEM, TEM, XPS, and UV-vis. The results show that the as-prepared MgWO₄ nanosheets have a triclinic symmetry phase and an obvious two-dimensional layered structure. Studies have shown that the MgWO₄ semiconductor nanosheets can adjust the energy level, which significantly enhances the visible light absorption and the separation and transfer of photogenerated electrons, which facilitates the generation of photogenerated electrons. We use this feature to boost a terbium ion (Tb³⁺)-ciprofloxacin (CIP) system to enhance the luminescence, so as to achieve highly sensitive detection of CIP. The mechanism of Tb³⁺-MgWO₄ for CIP detection is the effective energy transfer from WO₄^2- in MgWO₄ nanosheets to Tb³⁺-CIP, thereby enhancing the characteristic emission of Tb³⁺ and enhancing the sensitivity of CIP detection. The linear response of the Tb³⁺-MgWO₄ enhanced fluorescent probe is in the range from 10 nM to 20 μM, and the detection limit (LOD) is 2 nM. In addition, we tested the recovery in spiked river water and mouse serum. Experiments have shown that the recovery of spiked samples is 97-102.2%, while the relative standard deviation (RSD) is less than 5.53%. The possible interfering substances in environmental samples will not interfere with the detection of CIP with the Tb³⁺-MgWO₄ enhanced fluorescent probe. At the same time, the development of a smartphone-based portable device provides the possibility of CIP on-site detection. Our work provides a simple, fast, highly sensitive and stable method for detecting CIP in living organisms and the environment. Importantly, the strategy of MgWO₄ nanosheet boosted terbium ion luminescence expands the application range of semiconductor nanomaterials.

Detection of dopamine by a minimized electrochemical sensor using a graphene oxide molecularly imprinted polymer modified micropipette tip shaped graphite electrode

A simple and efficient electrochemical sensor based on a homemade reshaped micropipette tip carbon paste electrode is reported. Molecularly imprinted polymer membranes of graphene oxide and polypyrrole are synthesized and modified on the surface of micropipette tip carbon paste electrode. The merit of the method is evaluated under optimized conditions via differential pulse voltammetrics. The prepared sensor exhibits remarkable sensitivity toward dopamine with a linear range of 6.4 × 10−8–2 × 10−4 M, with a limit of detection as low as 1 × 10−8 M. The proposed method is applied for the determination of dopamine in urine samples by the standard addition route. A range of 1 × 10−7–1 × 10−4 M is obtained from these samples. The relative recoveries are in the range of 95.2%–104%. The proposed method has acceptable performance for the determination of dopamine in real samples with excellent sensitivity and selectivity.

One-pot synthesis of β-cyclodextrin modified silver nanoparticles for highly sensitive detection of ciprofloxacin

This study emphases on electrochemical detection of ciprofloxacin in sheep serum and runoff water using silver nanoparticle modified β-cyclodextrin (Ag-β-CD) composite. The Ag-β-CD composite was synthesized via a hydrothermal route, which resulted in a high product yield. Morphological and spectral characterizations of the Ag-β-CD composite were carried out. The Ag-β-CD composite was used to detect ciprofloxacin by employing differential pulse voltammetry (DPV) and cyclic voltammetry (CV). The Ag-β-CD modified electrode displayed excellent specificity towards the electro-oxidation of ciprofloxacin. Further, the sensor gave the best response towards the electro-oxidation of ciprofloxacin near the human physiological pH of 7.5. A linear response was obtained between the concentration range of 0.1 nM to 50 nM and the limit of detection (LOD) at 0.028 nM with high sensitivity and selectivity towards ciprofloxacin oxidation. The current work has a rationally synthesized and characterized nanocomposite with a very high potential for rapid and sensitive detection of ciprofloxacin in spiked sheep blood serum and domestic runoff water samples. High sensitivity and low LOD results illustrate good practicability for the detection of ciprofloxacin in such samples in the near future.

An electrochemical sensor for voltammetric detection of ciprofloxacin using a glassy carbon electrode modified with activated carbon, gold nanoparticles and supramolecular solvent

A highly sensitive and novel electrochemical sensor for ciprofloxacin (CIP) has been developed using gold nanoparticles deposited with waste coffee ground activated carbon on glassy carbon electrode (AuNPs/AC/GCE) and combined with supramolecular solvent (SUPRAS). The fabricated AuNPs/AC/GCE displayed good electrocatalytic activity for AuNPs. The addition of SUPRAS, prepared from cationic surfactants namely didodecyldimethylammonium bromide (DDAB) and dodecyltrimethylammonium bromide (DTAB), increased the electrochemical response of AuNPs. The detection of CIP was based on the decrease of the cathodic current of AuNPs. The electrochemical behavior of the modified electrode was investigated using cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. Under optimum conditions, the calibration plot of CIP exhibited a linear response in the range 0.5-25 nM with a detection limit of 0.20 nM. The fabricated electrochemical sensor was successfully applied to determine CIP in milk samples with achieved recoveries of 78.6-110.2% and relative standard deviations of <8.4%. The developed method was also applied to the analysis of pharmaceutical formulation and the results were compared with high-performance liquid chromatography.Graphical abstract.

Batch injection analysis with amperometric detection for fluoroquinolone determination in urine, pharmaceutical formulations, and milk samples using a reduced graphene oxide-modified glassy carbon electrode

In this work, the batch injection analysis system with amperometric detection using reduced graphene oxide as a modifier of glassy carbon electrode (GCE) was investigated for the simple, fast, and sensitive monitoring of levofloxacin (LEVO) and ciprofloxacin (CIPRO) in samples of pharmaceutical formulations, synthetic urine, and milk (low- and high-fat content). LEVO and CIPRO were quantified in seven samples using amperometric measurements at +1.10 V vs Ag/AgCl, KCl(sat). The developed methods showed excellent analytical performance with limits of detection of 0.30 and 0.16 μmol L^-1, linear range from 3.0 to 50 μmol L^-1 and 1.0 to 50 μmol L^-1, relative standard deviation below 9.7 and 3.1%, and recovery ranges ranging from 80 to 107% and from 78 to 109% for LEVO and CIPRO, respectively. In addition, the minimum sample preparation (simple dilution) combined with a high analytical frequency (130 to 180 analyses per hour) can be highlighted. Thus, the methods are promising for implementation in routine analysis and quality control to different samples.

Electrochemical Sensors Based on Conducting Polymers for the Aqueous Detection of Biologically Relevant Molecules

Electrochemical sensors appear as low-cost, rapid, easy to use, and in situ devices for determination of diverse analytes in a liquid solution. In that context, conducting polymers are much-explored sensor building materials because of their semiconductivity, structural versatility, multiple synthetic pathways, and stability in environmental conditions. In this state-of-the-art review, synthetic processes, morphological characterization, and nanostructure formation are analyzed for relevant literature about electrochemical sensors based on conducting polymers for the determination of molecules that (i) have a fundamental role in the human body function regulation, and (ii) are considered as water emergent pollutants. Special focus is put on the different types of micro- and nanostructures generated for the polymer itself or the combination with different materials in a composite, and how the rough morphology of the conducting polymers based electrochemical sensors affect their limit of detection. Polypyrroles, polyanilines, and polythiophenes appear as the most recurrent conducting polymers for the construction of electrochemical sensors. These conducting polymers are usually built starting from bifunctional precursor monomers resulting in linear and branched polymer structures; however, opportunities for sensitivity enhancement in electrochemical sensors have been recently reported by using conjugated microporous polymers synthesized from multifunctional monomers.