Regeneration of spent organoclays after the sorption of organic pollutants: A review

Critical review on the environmental behaviors and toxicity of triclosan and its removal technologies

As a highly effective broad-spectrum antibacterial agent, triclosan (TCS) is widely used in personal care and medical disinfection products, resulting in its widespread occurrence in aquatic and terrestrial environments, and even in the human body. Notably, the use of TCS surged during the COVID-19 outbreak, leading to increasing environmental TCS pollution pressure. From the perspective of environmental health, it is essential to systematically understand the environmental occurrence and behavior of TCS, its toxicological effects on biota and humans, and technologies to remove TCS from the environment. This review comprehensively summarizes the current knowledge regarding the sources and behavior of TCS in surface water, groundwater, and soil systems, focusing on its toxicological effects on aquatic and terrestrial organisms. Effluent from wastewater treatment plants is the primary source of TCS in aquatic systems, whereas sewage application and/or wastewater irrigation are the major sources of TCS in soil. Human exposure pathways to TCS and associated adverse outcomes were also analyzed. Skin and oral mucosal absorption, and dietary intake are important TCS exposure pathways. Reducing or completely degrading TCS in the environment is important for alleviating environmental pollution and protecting public health. Therefore, this paper reviews the removal mechanisms, including adsorption, biotic and abiotic redox reactions, and the influencing factors. In addition, the advantages and disadvantages of the different techniques are compared, and development prospects are proposed. These findings provide a basis for the management and risk assessment of TCS and are beneficial for the application of treatment technology in TCS removal.

organo acid-activated clays for water treatment as removal agent of Eosin-Y: Properties, regeneration, and single batch design absorber

Organoclays have been proposed as efficient removal agents for colored wastewater treatment. In this study, organo-acid-activated clays were investigated for their ability to remove eosin Y dye molecules. Firstly, the clay was acid activated using sulfuric solution at 90 °C for overnight. Secondly, the resulting materials were treated by hexadecyltetramethylammonium bromide solutions to obtain organo-acid-activated clays. Several techniques were used, such as X-ray diffraction, carbon hydrogen nitrogen analysis, silicon-29 and carbon-13 solid-state nuclear magnetic resonance, and nitrogen adsorption isotherms. The cation exchange capacity values were reduced and the specific surface area values increased from 80.1 m2/g to 183.2 m2/g during the acid activation process. The resulting organo-acid-activated clays had a similar expansion of interlayer spacing of 3.90 nm with less intercalated hexadecyltetramethylammonium surfactants, ranging from 0.80 mmol/g to 1.22 mmol/g; 13C solid NMR indicated that the intercalated surfactants exhibited different degree of conformation. Many factors, including the solid dose, solution pH, amount of intercalated surfactants, and starting eosin-Y concentrations, were studied in relation to the removal capabilities of organo acid-activated clays. Based on the Langmuir model, the removal capacity of the organo acid-activated clays ranged from a minimum of 43.5 mg/g to a maximum of 79.3 mg/g, dependent on the surfactant quantities and acid activation degree. , and the pH. The removal percentage of eosin-Y was increased from 50.5 % to 80.8 % by treating the organo acid-activated clay with HCl solution before the removal procedure. Regeneration and reuse of two selected organo acid-activated clays were carried out for seven successive cycles, and a reduction in the initial efficiency was in the range of 26.4 %-30.1 %. However, for organoclay (without acid activation), approximately 52.1 % efficiency was maintained. Using the Langmuir model and mass balance equations, a single-stage adsorber design was suggested for different dye volumes at a constant starting concentration.

Gemini Quaternary Ammonium Surfactants with Different Counterions-modified Montmorillonite for Efficient Removal of Methyl Orange

Organic Na-montmorillonite (OMt-12-2-12·2Y - , Y=CH 3 CO 3 - , C 6 H 5 COO - and Br - ) modified by a series of Gemini quaternary ammonium surfactants with different counterions was prepared for enhancing the adsorption capacity of methyl orange. Compared with the initial adsorption capacity of 5.251 mg/g of Na-Mt, the adsorption effect of OMts under the optimal conditions increased by about 31~34 times. The adsorption isotherms and kinetics of all adsorption processes were respectively described by Langmuir and pseudo-second-order models. The structure, hydrophobicity and hydration of the counterions, as well as the affinity of the counterions with the long aliphatic chains, had a certain influence on the adsorption performance of OMts for methyl orange.

Why reuse spent adsorbents? The latest challenges and limitations

Despite the abundance of published reviews over the last few years, the inconsistent data representation in regards to the use of adsorbents in each work, renders the task of comparing them challenging. Disposing the adsorbent may have adverse environmental impact, which should be mitigated through regeneration and reuse processes, such as desorption. This review discusses how the importance of desorption and regeneration equates that of the adsorption stage, and presents various regeneration methods as well as the influencing parameters, advantages, and disadvantages thereof. For the purposes of this work, the adsorbents have been categorized into four groups: (i) graphene, (ii) carbon nanotubes, (iii) activated carbon compounds and (iv) clays and polymer adsorbents as representatives in order to further study their desorption and regeneration abilities, using a variety of desorption media/eluants. The process conditions, such as pH, dose required, concentration, adsorption ability and the cost of the adsorbents were examined for further analysis. The recovery efficiency and ability to get reused through the desorption process was also evaluated. The highest adsorption capacity was observed for graphene-based adsorbents reaching between 108 and >480 mg/g, and for activated carbon materials ranging from 34 to >384 mg/g, whereas carbon nanotubes and polymer-based adsorbents indicated rather low and greatly varying adsorption capacities, between 1 and >138 mg/g and between 7 and >57 mg/g, respectively. Most of the reviewed cases appear to fit the pseudo-second order (PSO) kinetic model. These materials have demonstrated a removal effectiveness between 71% and 99%. Overall, all the aforementioned adsorbents share the advantage of being highly reusable.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Layered double hydroxides and related hybrid materials for removal of pharmaceutical pollutants from water

Pharmaceuticals and their by-products are recalcitrant contaminants in water. Moreover, the high consumption of these drugs has many detrimental effects on body waters and ecosystems. In this timely review, the advances in molecular engineering of layered double hydroxides (LDH) that have been used for the removal of pharmaceutical pollutants are discussed. The approach starts from the strategies to obtain homogeneous synthesis of LDH that allow the doping and/or surface functionalization of different metals and oxides, producing heterojunction systems as well as composites with carbon and silica-based materials with high surface area. Adsorption is considered as a traditional removal of pharmaceutical pollutants, so the kinetic and mechanism of this phenomenon are analyzed based on pH, temperature, ionic strength, in order to obtain new insights for the formation of multifunctional LDH. Advanced oxidation methodologies, mainly heterogeneous photocatalysis and Fenton-like processes, stand out as the more efficient even to obtain the mineralization of the drugs. The LDH have the advantage of structural memory that favors regeneration processes. The reconstruction of calcined LDH can be used to improve drug removal, through a combination of adsorption capacity/catalytic activity. A meticulous analysis of the persistence, toxicity and bioaccumulation of the most common pharmaceuticals has allowed us to highlight the ability of the LDH to remove recalcitrant drugs at relatively low concentrations (ppm, ppb), in contrast to other mixed oxide nanostructures and homogeneous oxidation processes. In this sense, the mechanism of drug removal by LDH is discussed based on the importance of the use of composites, scavenger agents, Fenton and electro-Fenton processes, membranes, thin films and coatings, among others. In addition, the ecotoxicity of LDH is also reviewed to indicate that these layered structures can exhibit biocompatibility or high toxicity depending on the adsorbed drug and ions/metals that compose them. Undoubtedly, the LDH have a unique flexible structure with adsorption capacity and catalytic activity, facts that explain the important reasons for their extensive use in the environmental remediation of pharmaceutical pollutants from water.

Designing clay-polymer nanocomposite sorbents for water treatment: A review and meta-analysis of the past decade

Clay-polymer nanocomposites (CPNs) have been studied for two decades as sorbents for water pollutants, but their applicability remains limited. Our aim in this review is to present the latest progress in CPN research using a meta-analysis approach and identify key steps necessary to bridge the gap between basic research and CPN application. Based on results extracted from 99 research articles on CPNs and 8 review articles on other widely studies sorbents, CPNs had higher adsorption capacities for several inorganic and organic pollutant classes (including heavy metals, oxyanions, and dyes, n = 308 observations). We applied principal component analysis, analysis of variance, and multiple linear regressions to test how CPN and pollutant properties correlated with Langmuir adsorption model coefficients. While adsorption was, surprisingly, not influenced by mineral properties, it was influenced by CPN fabrication method, polymer functional groups, and pollutant properties. For example, among the pollutant classes, heavy metals had the highest adsorption capacity but the lowest adsorption affinity. On the other hand, dyes had high adsorption affinities, as reflected by the linear correlation between adsorption affinity and pollutant molecular weight. Scaling from 'basic research' to 'technological application' requires testing CPN performance in real water, application in columns, comparison to commercial sorbents, regeneration, and cost evaluation. However, our survey indicates that of the 158 observations, only 20 compared the CPN's performance to that of a commercial sorbent. We anticipate that this review will promote the design of smart and functional CPNs, which can then evolve into an effective water treatment technology.

Nickel ion removal from aqueous solutions through the adsorption process: a review

Recently, removal of nickel ions has been gaining a lot of attention because of the negative impact of nickel ions on the environment. The aim of this review paper is to organize the scattered available information on removal of nickel ions from aqueous solutions through the adsorption process. Survey on investigated materials suggests that composite- and polymer-based adsorbents have the most effective capability for nickel adsorption. The composite material class, i.e. CaCO3-maltose, followed by biopolymer-based material showed the highest Ni(II) adsorption capacity of 769.23 and 500 mg/g, respectively. The importance of treatment parameters (i.e. pH, temperature, contact time, and metal ion concentration) is discussed, together with their effect on the underlying physicochemical phenomena, giving particular attention to the adsorption/desorption mechanism. It was ascertained that adsorption of nickel ions is pH dependent and the optimal pH range for adsorption of Ni(II) ions was in range of 6–8. In general, nickel adsorption is an endothermic and spontaneous process that mainly occurs by forming a monolayer on the adsorbent (experimental data are often fitted by Langmuir isotherms and pseudo-second-order kinetics). Regeneration (i.e. desorption) is also reviewed, suggesting that acidic eluents (e.g. HCl and HNO3) allow, in most of the cases, an efficacious spent adsorbent recovery. The percentage use of desorption agents followed the order of acids (77%) > chelators (8.5%) > alkalis (8%) > salts (4.5%) > water (2%). Helpful information about adsorption and desorption of nickel ions from aqueous solutions is provided.

Sorbent-modified biodegradation studies of the biocidal cationic surfactant cetylpyridinium chloride

Biodegradability studies for the cationic surfactant cetylpyridinium chloride (CPC) are hampered by inhibitory effects on inoculum at prescribed test concentrations (10-20 mg organic carbon/L). In this study, we used ¹⁴C labeled CPC in the 28 d Headspace Test (OECD 310) and demonstrated that CPC was readily biodegradable (10->60% mineralization within a 10 day window) at test concentrations 0.006-0.3 mg/L with CPC as single substrate. Biodegradation efficiency was comparable over this concentration range. CPC inhibited degradation at 1 mg/L and completely suppressed inoculum activity at 3 mg/L. In an extensive sorbent modified biodegradation study we evaluated the balance between CPC bioaccessibility and toxicity. A non-inhibitory concentration of 0.1 mg/L CPC was readily biodegradable with 83% sorbed to SiO₂, while biodegradation was slower when 96% was sorbed. SiO₂ mitigated inhibitory effects of 1 mg/L CPC, reaching >60% biodegradation within 28 d; inhibitory effects were also mitigated by addition of commercial clay powder (illite) but this was primarily reflected by a reduced lag phase. At 10 mg/L CPC SiO₂ was still able to mitigate inhibitory effects, but bioaccessibility seemed limited as only 20% biodegradation was reached. Illite limited bioaccessibility more strongly and was not able to sustain biodegradation at 10 mg/L CPC.

Use 3-D tomography to reveal structural modification of bentonite-enriched clay by nonionic surfactants: Application of organo-clay composites to detoxify aflatoxin B1 in chickens

Although nonionic surfactants are relatively eco-friendly compared with cationic and anionic surfactants, few studies have investigated their application in modified clay. Herein we prepared organo-clay composites (OCCs) by mixing bentonite-enriched clay (BEC) with nonionic surfactants (Brij 30 and Igepal CO-890) and determined if these modifications would enable chickens to detoxify aflatoxin B1 (AFB1). For the first time, in situ three-dimensional (3-D) microstructures of modified BEC was characterized in suspension using transmission X-ray microscopy. Although X-ray diffraction patterns indicated the expansion in the spacing between planes of atoms (basal spacing) of surfactant-modified BEC, 3-D images indicated shrinkage in its microscale porous framework with increasing surfactant additions from 1 to 30 wt%. Such declining trends in porous dimensions caused by the dehydration in interlayer galleries of clays positively correlated with sorption amounts of AFB1 on OCCs. After chickens had consumed amended feeds for 11 weeks, AFB1 concentrations in liver, kidney, and plasma were significantly lower than in the control treatment. Thus, we suggest using BEC with 1 wt% surfactant addition, an amendment to chicken feeds, to detoxify AFB1. Modifying BEC with nonionic surfactants show the promise in mitigating AFB1 accumulation in chickens, which should improve food safety and reduce environmental contamination.

Biocompatible functionalisation of nanoclays for improved environmental remediation

Among the wide range of materials used for remediating environmental contaminants, modified and functionalised nanoclays show particular promise as advanced sorbents, improved dispersants, or biodegradation enhancers. However, many chemically modified nanoclay materials are incompatible with living organisms when they are used in natural systems with detrimental implications for ecosystem recovery. Here we critically review the pros and cons of functionalised nanoclays and provide new perspectives on the synthesis of environmentally friendly varieties. Particular focus is given to finding alternatives to conventional surfactants used in modified nanoclay products, and to exploring strategies in synthesising nanoclay-supported metal and metal oxide nanoparticles. A large number of promising nanoclay-based sorbents are yet to satisfy environmental biocompatibility in situ but opportunities are there to tailor them to produce "biocompatible" or regenerative/reusable materials.

Inhibition of naphthalene leaching from municipal carbonaceous waste by a magnetic organophilic clay

Municipal solid waste conversion into biofuels via gasification is one of the latest technologies to divert waste from landfills. The byproduct of the process is a carbonaceous material, which is often tainted with polycyclic aromatic hydrocarbons (PAH) such as naphthalene that can leach into the environment and have toxic effects on aquatic organisms. In this paper, we present a novel method to address the issue of leachable naphthalene in a carbonaceous waste produced from a gasification process, using a magnetic sorbent. The sorbent was fabricated by the coprecipitation of iron oxide nanoparticles on an organophilic clay under atmospheric conditions. The characterization results show that the intercalated nanoparticles are predominantly magnetite with a diameter of 15-20 nm, and increase the clay specific surface area from 0.4 to 17 m² g^-1. Toxicity characteristic leaching procedure results indicate that the magnetic composite has a high naphthalene inhibition efficiency comparable to that of the original clay. As opposed to the clay alone, the magnetic hybrid can be separated from the carbonaceous waste with a magnet, regenerated by heat treatment, and reused without compromising its naphthalene removal efficiency. Thus, these composites may provide a cost-effective method to curtail leaching of PAH from contaminated carbonaceous waste.

Waste Bricks Applied as Removal Agent of Basic Blue 41 from Aqueous Solutions: Base Treatment and Their Regeneration Efficiency

Waste brick materials were applied as removal materials of basic blue 41 (BB-41) from artificially contaminated water. They were characterized by different techniques prior their use. A series of removal tests were carried out at different conditions, such as a dosage effect, pH value, initial concentrations, and chemical treatment. The removal results indicated that the two untreated waste bricks had limited removal capacities of basic blue 41, ranging from 19 to 30 mg/g. However, these values were improved upon treatment with NaOH solution or by increasing the removal temperature. Waste brick collected from the Medina area (Med-WB) exhibited higher removal capacity compared to the one collected from the Jeddah area (Jed-WB), with a maximum removal capacity of 60 mg/g at 60 °C. The pH of the BB-41 solution also played an important factor, as it improved the removal amounts from 25 mg/g to 45 mg/g at initial concentration of 200 mg/L. The regenerative process was studied using oxidative reaction of the removed basic blue 41 with a solution of oxone and cobalt nitrate. The efficiency was maintained after 5 runs for Med-WB, with a slight variation of 25%, while it felt to 50% for Jed-WB material after three runs. These data indicate that the waste brick materials present as potential candidates for the dye removal and their origin has to be identified.

Regeneration performance of clay-based adsorbents for the removal of industrial dyes: a review

The present review covers the regeneration capacity and adsorption efficiency of different adsorbents for the treatment of industrial dyes to control water pollution. Various techniques and materials have been employed to remove organic pollutants from water; however, adsorption techniques using cost-effective, ecofriendly, clay-supported adsorbents are widely used owing to their simplicity and good efficiency. Among all the natural adsorbents, activated carbon has been found to be the most effective for dye adsorption; however, its use is restricted due to its high regeneration cost. Clays and modified clay-based adsorbents are the most efficient clarifying agents for organic pollutants as compared to activated carbon, organic/inorganic, and composite materials. Regeneration is an important aspect to stimulate the adsorption efficiency of the exhausted/spent adsorbent for water treatment. A number of techniques, including chemical treatment, supercritical extraction, thermal, and photocatalytic and biological degradation, have been developed to regenerate spent or dye-adsorbed clays. This review discusses how these techniques enhance the adsorption and retention potential of spent low-cost adsorbents and reflects on the future perspectives for their use in wastewater treatment.

Designing a regenerable stimuli-responsive grafted polymer-clay sorbent for filtration of water pollutants

A novel, stimuli-responsive composite, based on poly(4-vinylpyridine) (PVP) brushes, end-grafted to montmorillonite clay (GPC), was designed as a regenerable sorbent for efficient removal of pollutants from water. We characterized the novel composite sorbent and its response to pH, employing Fourier transform infrared, X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetry analysis and zeta potential measurements. In comparison with conventional, electrostatically adsorbed PVP composites (APC), the GPC presented superior characteristics: higher polymer loading without polymer release, higher zeta potential and lower pH/charge dependency. These superior characteristics explained the significantly higher removal of organic and inorganic anionic pollutants by this composite, in comparison with the removal by APC and by many reported sorbents. For example, the filtration (20 pore volumes) of selenate by GPC, APC and a commercial resin column was complete (100%), negligible (0%) and reached 90% removal, respectively. At low-moderate pH, the grafted polymer undergoes protonation, promoting pollutant adsorption, whereas at high pH, the polymer deprotonates, promoting pollutant desorption. Indeed, 'in-column' regeneration of the GPC sorbents was achieved by increasing pH, and upon a second filtration cycle, no reduction in filter capacity was observed. These findings suggest the possible applicability of this stimuli-responsive sorbent for water treatment.

Adsorption of quinolone antibiotics in spherical mesoporous silica: Effects of the retained template and its alkyl chain length

In this study, mesoporous silica (meso-silica) MCM-41 and those with the templates retained were synthesized and characterized. Adsorption capacities of the synthesized materials towards typical quinolone antibiotic pollutants, enrofloxacin and norfloxacin as representative, were investigated, and effects of the alkyl chain length of the templates on the adsorption capacity were evaluated. The results of this study indicated that the retained templates enhanced the adsorption capacities (Qmax) of the meso-silica MCM-41 toward hydrophobic enrofloxacin, but had an inhibitory effect on that towards hydrophilic norfloxacin, which were attributed to the hydrophobic inter-environment created by the long alkyl chains of the retained templates. Importantly, the adsorption capacity increased with the increase of the alkyl chain length of the retained templates.

Self-regenerative and self-enhanced smart graphene/Ag3PO4 hydrogel adsorbent under visible light

We prepared a new 3D adsorbent that could be easily removed by filtration and recycled.

Bioremediation of PAHs and VOCs: Advances in clay mineral-microbial interaction

Bioremediation is an effective strategy for cleaning up organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Advanced bioremediation implies that biotic agents are more efficient in degrading the contaminants completely. Bioremediation by microbial degradation is often employed and to make this process efficient, natural and cost-effective materials can serve as supportive matrices. Clay/modified clay minerals are effective adsorbents of PAHs/VOCs, and readily available substrate and habitat for microorganisms in the natural soil and sediment. However, the mechanism underpinning clay-mediated biodegradation of organic compounds is often unclear, and this requires critical investigation. This review describes the role of clay/modified clay minerals in hydrocarbon bioremediation through interaction with microbial agents in specific scenarios. The vision is on a faster, more efficient and cost-effective bioremediation technique using clay-based products. This review also proposes future research directions in the field of clay modulated microbial degradation of hydrocarbons.

Single and multi-component adsorption of salicylic acid, clofibric acid, carbamazepine and caffeine from water onto transition metal modified and partially calcined inorganic-organic pillared clay fixed beds

Fixed-beds of transition metal (Co(2+), Ni(2+) or Cu(2+)) inorganic-organic pillared clays (IOCs) were prepared to study single- and multi-component non-equilibrium adsorption of a set of pharmaceutical and personal care products (PPCPs: salicylic acid, clofibric acid, carbamazepine and caffeine) from water. Adsorption capacities for single components revealed that the copper(II) IOCs have better affinity toward salicylic and clofibric acid. However, multi-component adsorption tests showed a considerable decrease in adsorption capacity for the acids and an unusual selectivity toward carbamazepine depending on the transition metal. This was attributed to a combination of competition between PPCPs for adsorption sites, adsorbate-adsorbate interactions, and plausible pore blocking caused by carbamazepine. The cobalt(II) IOC bed that was partially calcined to fractionate the surfactant moiety showcased the best selectivity toward caffeine, even during multi-component adsorption. This was due to a combination of a mildly hydrophobic surface and interaction between the PPCP and cobalt(II). In general, the tests suggest that these IOCs may be a potential solution for the removal of PPCPs if employed in a layered-bed configuration, to take care of families of adsorbates in a sequence that would produce sharpened concentration wavefronts.