Review on upgrading organic waste to value-added carbon materials for energy and environmental applications

Recent advances in titanium dioxide bio-derived carbon photocatalysts for organic pollutant degradation in wastewater

Water pollution from organic pollutants such as dyes and pharmaceuticals poses severe threats to ecosystems and human health, demanding effective remediation strategies. Conventional water treatment methods fall short in eliminating these contaminants, prompting interest in photocatalysis, which uses light energy to degrade pollutants into harmless substances such as carbon dioxide and water. This sustainable approach offers efficient pollutant removal with recyclable photocatalysts but faces challenges such as rapid charge recombination and limited electron-hole migration. Research aims to enhance photocatalytic efficiency under UV, visible, and solar light through metal doping and binary oxide systems, particularly titanium dioxide, which improves charge carrier migration and delays recombination. Coupling titanium dioxide with bio-derived carbon shows promise in enhancing electron-hole separation and visible light absorption. This review explores advances in photocatalyst synthesis, degradation mechanisms, adsorption reactions, and economic value of bioderived photocatalysts, emphasizing the potential of photocatalysis for efficient wastewater treatment.

Enhancing caproate production in lactate-containing effluents by Megasphaera hexanoica through acetate modulation

The anaerobic bacterium Megasphaera hexanoica has great potential for caproate production through reverse β-oxidation using lactate, acetate, and butyrate as substrates. This study assessed the effect of acetate concentrations (10-50 mM) on caproate biosynthesis, lactate oxidation, and cell synthesis in M. hexanoica. At 30 mM acetate, caproate production reached 42.83 mM, with an electron efficiency of 67.03 % and a specific productivity of 4.47 gCA·h-1·gDCW-1. Subsequent fed-batch experiments with lactate, acetate, and butyrate maintained continuous caproate production, achieving 65.21 mM. Bioreactor assays further validated the strategy, yielding 65.25 mM caproate over 180 h. Mechanistic analysis demonstrated that 30 mM acetate optimized acetyl-CoA flux and enhanced caproyl-CoA transferase activity (3.5 U‧mg-1), supporting caproate synthesis. Kinetic modeling demonstrated the Logistic model fit lactate consumption (R2 = 0.991), while the Fitzhugh model captured caproate production (R2 = 0.991, NRMSE = 1.137). The findings offer practical insights for industrial-scale caproate production.

Enhanced priming effect in agricultural soils driven by high-quality exogenous organic carbon additions: A meta-analysis

The addition of exogenous organic carbon (C) to soil can either accelerate or retard the soil organic carbon (SOC) mineralization, i.e., the priming effect (PE), which plays a crucial role in SOC sequestration and thus is significant in the context of global warming. However, the influence of exogenous organic C quality on PE remains poorly understood, potentially limiting our understanding of SOC dynamics. Thus, we conducted a global meta-analysis to reveal the effect of exogenous organic C quality on PE through compiling a data set of 2031 experiment trials. Our results revealed that the addition of organic C significantly enhanced SOC decomposition by 46.23 % in agricultural soils. Labile C compounds induced a stronger PE than both intermediate and recalcitrant C compounds. Organic C materials rich in labile C compounds or with low lignin/N ratios exhibited a greater PE than the resistant substrates. Notably, a threshold C/N ratio of 25 was associated with a higher PE in substrates with C/N < 25. Given the pronounced PE observed with high-quality organic C addition (characterized by C/N <25, low lignin/N ratio, and easy decomposability), we proposed that "stoichiometric decomposition" might predominate the PE in agricultural soils. Collectively, the current study underscores the significant role of exogenous organic C quality in modulating the PE, emphasizing the need for further research to inform effective SOC management strategies.

Insight mechanism of magnetic activated catalyst derived from recycled steel residue for black liquor degradation

The present work deals with developing a method for revalorizing steel residues to create sunlight-active photocatalysts based on iron oxides. Commercial-grade steel leftovers are oxidized under different combinations of pH and temperature (50-90 °C and 3 ≥ pH ≤ 5) in a low energy-intensive setup. The material with the highest production efficiency (yield > 12%) and magnetic susceptibility (χm = 387 × 10-6 m3/kg) was further explored and modified by diffusion of M2+ (Zn and Co) ions within the structure of the oxide using a hydrothermal method to create ZnFe2O4, CoFe2O4 and combined Co-Zn ferrite. (Co-Zn)Fe2O4 displayed a bandgap of 2.02 eV and can be activated under sunlight irradiation. Electron microscopy studies show that (Co-Zn)Fe2O4 consists of particles with diameters between 400 and 700 nm, homogeneous size, even distribution, and good dispersibility. Application of the developed materials in the sunlight catalysis of black liquors from cellulose extraction resulted in a reduction of the Chemical Oxygen Demand (- 15% on average) and an enhancement in biodegradability (> 0.57 BOD/COD) after 180 min of reaction. Since the presented process employs direct solar light, it opens the possibility to large-scale water treatment and chemical upgrading applications.

Natural bio-waste-derived 3D N/O self-doped heteroatom honeycomb-like porous carbon with tuned huge surface area for high-performance supercapacitor

Supercapacitor electrodes (SCs) of carbon-based materials with flexible structures and morphologies have demonstrated excellent electrical conductivity and chemical stability. Herein, a clean and cost-effective method for producing a 3D self-doped honeycomb-like carbonaceous material with KOH activation from bio-waste oyster shells (BWOSs) is described. A remarkable performance was achieved by the excellent hierarchical structured carbon (HSC-750), which has a large surface area and a reasonably high packing density. The enhanced BWOSs-derived HSC-750 shows an ultrahigh specific capacitance of 525 F/g at 0.5 A g-1 in 3 M KOH electrolyte, as well as high specific surface area (2377 m2 g-1), pore volume (1.35 cm3 g-1), nitrogen (4.70%), and oxygen (10.58%) doping contents. The SCs also exhibit exceptional cyclic stability, maintaining 98.5% of their capacitance after 10,000 charge/discharge cycles. The two-electrode approach provides a super high energy density of 28 Wh kg-1 at a power density of 250 W kg-1 in an alkaline solution, with remarkable cyclability after 10,000 cycles. The study demonstrates the innovative HSC synthesis from BWOSs precursor and cost-effective fabrication of 3D N/O self-doped heteroatom HSC for flexible energy storage.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Waste-derived carbon nanostructures (WD-CNs): An innovative step toward waste to treasury

With the growing population, the accumulation of waste materials (WMs) (industrial/household waste) in the environment incessantly increases, affecting human health. Additionally, it affects the climate and ecosystem of terrestrial and water habitats, thereby needing effective management technology to control environmental pollution. In this aspect, managing these WMs to develop products that mitigate the associated issues is necessary. Researchers continue to focus on WMs management by adopting a circular economy. These WMs convert into useful/value-added products such as polymers and nanomaterials (NMs), especially carbon nanomaterials (CNs). The conversion/transformation of waste material into useful products is one of the best solutions for managing waste. Waste-derived CNs (WD-CNs) have established boundless promises for numerous applications like environmental remediation, energy, catalysts, sensors, and biomedical applications. This review paper discusses the several sources of waste material (agricultural, plastic, industrial, biomass, and other) transforming into WD-CNs, such as carbon nanotubes (CNTs), biochar, graphene, carbon nanofibers (CNFs), carbon dots, etc., are extensively elaborated and their application. The impact of metal doping within the WD-CNs is briefly discussed, along with their applicability to end applications.

PFAS remediation in soil: An evaluation of carbon-based materials for contaminant sequestration

The presence of per- and poly-fluoroalkyl substances (PFAS) in soils is a global concern as these emerging contaminants are highly resistant to degradation and cause adverse effects on human and environmental health at very low concentrations. Sequestering PFAS in soils using carbon-based materials is a low-cost and effective strategy to minimize pollutant bioavailability and exposure, and may offer potential long-term remediation of PFAS in the environment. This paper provides a comprehensive evaluation of current insights on sequestration of PFAS in soil using carbon-based sorbents. Hydrophobic effects originating from fluorinated carbon (C-F) backbone "tail" and electrostatic interactions deriving from functional groups on the molecules' "head" are the two driving forces governing PFAS sorption. Consequently, varying C-F chain lengths and polar functional groups significantly alter PFAS availability and leachability. Furthermore, matrix parameters such as soil organic matter, inorganic minerals, and pH significantly impact PFAS sequestration by sorbent amendments. Materials such as activated carbon, biochar, carbon nanotubes, and their composites are the primary C-based materials used for PFAS adsorption. Importantly, modifying the carbon structural and surface chemistry is essential for increasing the active sorption sites and for strengthening interactions with PFAS. This review evaluates current literature, identifies knowledge gaps in current remediation technologies and addresses future strategies on the sequestration of PFAS in contaminated soil using sustainable novel C-based sorbents.

Utilization of biochar for remediation of heavy metals in aqueous environments: A review and bibliometric analysis

Biochar usage for removing heavy metals from aqueous environments has emerged as a promising research area with significant environmental and economic benefits. Using the PICO approach, the research question aimed to explore using biochar to remove heavy metals from aqueous media. We merged the data from Scopus and the Web of Science Core Collection databases to acquire a comprehensive perspective of the subject. The PRISMA guidelines were applied to establish the search parameters, identify the appropriate articles, and collect the bibliographic information from the publications between 2010 and 2022. The bibliometric analysis showed that biochar-based heavy metal remediation is a research field with increasing scholarly attention. The removal of Cr(VI), Pb(II), Cd(II), and Cu(II) was the most studied among the heavy metals. We identified five main clusters centered on adsorption, water treatment, adsorption models, analytical techniques, and hydrothermal carbonization by performing keyword co-occurrence analysis. Trending topics include biochar reusability, modification, acid mine drainage (AMD), wastewater treatment, and hydrochar. The reutilization of heavy metal-loaded spent biochar includes transforming it into electrodes for supercapacitors or stable catalyst materials. This study provides a comprehensive overview of biochar-based heavy metal remediation in aquatic environments and highlights knowledge gaps and future research directions.

Unlocking integrated waste biorefinery approach by predicting calorific value of waste biomass

The current study analyzed the high heating values (HHVs) of various waste biomass materials intending to the effective management and more sustainable consumption of waste as clean energy source. Various biomass waste samples including date leaves, date branches, coconut leaves, grass, cooked macaroni, salad, fruit and vegetable peels, vegetable scraps, cooked food waste, paper waste, tea waste, and cardboard were characterized for proximate analysis. The results revealed that all the waste biomass were rich in organic matter (OM). The total OM for all waste biomass ranged from 79.39% to 98.17%. Likewise, the results showed that all the waste biomass resulted in lower ash content and high fixed carbon content associated with high fuel quality. Based on proximate analysis, various empirical equations (HHV=28.296-0.2887(A)-656.2/VM, HHV=18.297-0.4128(A)+35.8/FC and HHV=22.3418-0.1136(FC)-0.3983(A)) have been tested to predict HHVs. It was observed that the heterogeneous nature of various biomass waste considerably affects the HHVs and hence has different fuel characteristics. Similarly, the HHVs of waste biomass were also determined experimentally using the bomb calorimeter, and it was observed that among all the selected waste biomass, the highest HHVs (21.19 MJ kg-1) resulted in cooked food waste followed by cooked macaroni (20.25 MJ kg-1). The comparison revealed that experimental HHVs for the selected waste biomass were slightly deviated from the predicted HHVs. Based on HHVs, various thermochemical and biochemical technologies were critically overviewed to assess the suitability of waste biomass to energy products. It has been emphasized that valorizing waste-to-energy technologies provides the dual benefits of sustainable management and production of cleaner energy to reduce fossil fuels dependency. However, the key bottleneck in commercializing waste-to-energy systems requires proper waste collection, sorting, and continuous feedstock supply. Moreover, related stakeholders should be involved in designing and executing the decision-making process to facilitate the global recognition of waste biorefinery concept.

Seawater as supplemental moisture: The effect of Co-hydrothermal carbonization products obtained from chicken manure and cornstalk

The use of seawater as a substitute for pure water as supplemental moisture raises questions about its effect on the physicochemical properties of hydrochar. Therefore, this study aimed to investigate the feasibility of using seawater as supplemental moisture by comparing the physicochemical properties of products obtained through Co-hydrothermal carbonization of chicken manure and cornstalk under seawater and deionized water conditions. By varying the HTC temperature and blending ratios of CM and CS to investigate comprehensively the effect of seawater. Results indicated that the hydrochar yield experienced a variation from 54.54% to 57.40%, while the IC value changed from 7.69% to 8.46% as the ratio of CM:CS shifted from 3:1 to 1:3 under seawater conditions. The higher heating value of the hydrochars obtained under seawater conditions was lower than those obtained under deionized water conditions. This suggests that seawater conditions promote the hydrolysis reaction of organic solid waste. Furthermore, it was observed that when no lignin hydrolysis reaction occurred, seawater conditions had no discernible effect on the fuel quality of the hydrochar. However, at an HTC temperature of 250 °C, the fuel quality of the hydrochar obtained under seawater conditions was notably inferior to that of the hydrochar obtained under deionized water. Thus, an HTC temperature lower than 250 °C is necessary for the hydrothermal carbonization of organic solid waste under seawater conditions. Moreover, the relative content of surface -C-(C, H)/CC of the hydrochar obtained under seawater conditions was lower than that obtained under deionized water conditions, indicating that the hydrochar had a low degree of aromatization. Additionally, there was a significant increase in the immobilized Mg atoms in the hydrochar under seawater conditions, which affected the hydrochar yield and higher heating value of the hydrochar. This research presents a theoretical foundation for preparing solid fuels and materials using hydrothermal carbonization of saltwater as supplemental moisture.

Recent advancements and challenges in emerging applications of biochar-based catalysts

The sustainable utilization of biochar produced from biomass waste could substantially promote the development of carbon neutrality and a circular economy. Due to their cost-effectiveness, multiple functionalities, tailorable porous structure, and thermal stability, biochar-based catalysts play a vital role in sustainable biorefineries and environmental protection, contributing to a positive, planet-level impact. This review provides an overview of emerging synthesis routes for multifunctional biochar-based catalysts. It discusses recent advances in biorefinery and pollutant degradation in air, soil, and water, providing deeper and more comprehensive information of the catalysts, such as physicochemical properties and surface chemistry. The catalytic performance and deactivation mechanisms under different catalytic systems were critically reviewed, providing new insights into developing efficient and practical biochar-based catalysts for large-scale use in various applications. Machine learning (ML)-based predictions and inverse design have addressed the innovation of biochar-based catalysts with high-performance applications, as ML efficiently predicts the properties and performance of biochar, interprets the underlying mechanisms and complicated relationships, and guides biochar synthesis. Finally, environmental benefit and economic feasibility assessments are proposed for science-based guidelines for industries and policymakers. With concerted effort, upgrading biomass waste into high-performance catalysts for biorefinery and environmental protection could reduce environmental pollution, increase energy safety, and achieve sustainable biomass management, all of which are beneficial for attaining several of the United Nations Sustainable Development Goals (UN SDGs) and Environmental, Social and Governance (ESG).

Improving yields by switching central metal ions in porphyrazine-catalyzed oxidation of glucose into value-added organic acids with SnO2 in aqueous solution

Photocatalysis has exhibited huge potential in selective conversion of glucose into value-added chemicals. Therefore, modulation of photocatalytic material for selective upgrading of glucose is significant. Here, we have investigated the insertion of different central metal ions, Fe, Co, Mn, and Zn, into porphyrazine loading with SnO2 for access to more efficient transformation of glucose into value-added organic acids in aqueous solution at mild reaction conditions. The best selectivity for organic acids containing glucaric acid, gluconic acid, and formic acid of 85.9% at 41.2% glucose conversion was attained by using the SnO2/CoPz composite after reacting for 3 h. The effects of central metal ions on surficial potential and related possible factors have been studied. Experimental results showed that the introduction of metalloporphyrazine with different central metal ions on the surface of SnO2 has a significant effect on the separation of photogenerated charges, changing the adsorption and desorption of glucose and products on the catalyst surface. The central metal ions of cobalt and iron contributed more to the positive effects toward enhancing conversion of glucose and yields of products, and manganese and zinc contributed more to the negative effects, resulting in the poor yield of products. The differences from the central metals may attribute to the surficial potential change of the composite and the coordination effects between the metal and oxygen atom. An appropriate surficial potential environment of the photocatalyst may achieve a better interactive relationship between the catalyst and reactant, while appropriate ability of producing active species matched with adsorption and desorption abilities would gain a better yield of products. These results have provided valued ideas for designing more efficient photocatalysts in selective oxidation of glucose utilizing clean solar energy in the future.

Agricultural waste to real worth biochar as a sustainable material for supercapacitor

Biochar made from agricultural waste is gaining more attention in energy field due to its sustainability, low cost, apart from having high supercapacitance performance. Also, it has a wide range of environmental applications, including wastewater treatment, upgrading soil fertility, contaminant immobilization, and in situ carbon sequestration. The existing thermo-chemical methodologies for converting agricultural waste into a sustainable material i.e. biochar and the role of activation agents in enhancing the performance of these materials were critically analyzed and discussed. An overview of recent trends in agricultural waste-derived biochar for supercapacitor electrodes is highlighted in this review that emphasizes green circular economy for encouraging net-zero utility of agriculture waste biomass. The roles of various newly prepared "green" electrolytes in reducing the negative consequences of supercapacitor is also reviewed. The trashing of agricultural waste and the depletion of energy supplies has become a global concern, hurting the world's ecosystem and economy through pollution and a fuel crisis and hence the concept of a green circular economic model is also highlighted.

Converting food waste into soil amendments for improving soil sustainability and crop productivity: A review

One-third of the annual food produced globally is wasted and much of the food waste (FW) is unutilized; however, FW can be valorized into value-added industrial products such as biofuel, chemicals, and biomaterials. Converting FW into soil amendments such as compost, vermicompost, anaerobic digestate, biofertilizer, biochar, and engineered biochar is one of the best nutrient recovery and FW reuse approaches. The soil application of FW-based amendments can improve soil fertility, increase crop production, and reduce contaminants by altering soil's chemical, physical, microbial, and faunal properties. However, the efficiency of the amendment for improving ecosystem sustainability depends on the type of FW, conversion method, application rate, soil type, and crop type. Engineered biochar/biochar composite materials produced using FW have been identified as promising amendments for soil remediation, reducing commercial fertilizer usage, and increasing soil nutrient use efficiency. The development of quality standards and implementation of policies and regulations at all stages of the food supply chain are necessary to manage (reduce and re-use) FW.

Environmental impact of metal halide perovskite solar cells and potential mitigation strategies: A critical review

Metal halide perovskite solar cells (PSCs) have gained extensive attention in the field of solar photovoltaic technology over the past few years. Despite being a remarkable alternative to fossil fuels, solar cells may have detrimental effects on the environment and human health owing to the use of toxic materials during manufacturing. Although modern metal-halide-based PSCs are stable and have encapsulation to prevent the release of potentially toxic materials into the environment, their destruction due to strong winds, hail, snow, landslides, fires, or waste disposal can result in the exposure of these materials to the environment. This may lead to the contamination of soil and groundwater, and uptake of potentially toxic elements by plants, subsequently affecting humans and other living organisms via food chain contamination. Despite worldwide concern, the environmental and ecotoxicological impacts of metal-halide-based PSCs have not been comprehensively surveyed. This review summarizes and critically evaluates the current status of metal-halide-based PSC production and its impact on environmental sustainability, food security, and human health. Furthermore, safe handling and disposal methods for the waste generated from metal-halide-based PSCs are proposed, with a focus on recycling and reuse. Although some studies have suggested that the amount of lead released from metal halide PSCs is far below the maximum permissible levels in most soils, a clear conclusion cannot be reached until real contamination scenarios are assessed under field conditions. Precautions must be taken to minimize environmental contamination throughout the lifecycle of PSCs until nontoxic and similarly performing alternative solar photovoltaic products are developed.

Experimental microwave-assisted air gasification of biomass in fluidized bed reactor

Microwave-assisted heating is an effective heating method for thermochemical conversion of biomass. In this study, experimental syngas production from microwave-assisted air gasification of biomass in a fluidized bed reactor at different gasification temperatures, equivalence ratios and silicon carbide loads, was studied and reported. The results showed that the highest syngas yield (78.2 wt%), higher heating value (6.3 MJ/Nm³) and cold gas efficiency (81.8 %) were obtained at gasification temperature of 900 °C, equivalence ratio of 0.35 and silicon carbide load of 30 g, and the gasification temperature had significant influence on the syngas production. Microwave-assisted heating showed positive effect on tar reduction, i.e., the tar content at 900 °C (2.1 wt%) in this study was even lower than the tar content (3.2 wt%) from catalytic electrical air gasification of rice husk at 950 °C. Generally, the introduction of microwave-assisted heating showed positive effect on biomass gasification.

Recent progress on production technologies of food waste-based biochar and its fabrication method as electrode materials in energy storage application

The abundance of food waste across the globe has called for the mitigation and reduction of these discarded wastes. Herein, the potential of biochar derived from food waste is unquestionable as it provides a sustainable way of utilizing the abundance of available biomass, as well as an effective way of preserving the ecosystem through the reduction of concerning environmental issues. This review focuses on the food waste-based biochar as advanced electrode materials in the energy storage devices. Efforts have been made to present and discuss the current exploration of the food waste utilization, along with the biochar production technologies through thermochemical conversion, including combustion, gasification, and pyrolysis method. Finding its limitation in literatures, discussion on the food waste-based biochar fabrication method as the electrode materials is elaborated, alongside the current food waste-based biochar that has been explored in the energy application thus far. Towards the end, the outlook and perspective on the further development of food waste-based biochar have been outlined.

Sustainable production of biosurfactants via valorisation of industrial wastes as alternate feedstocks

Globally, the rapid increase in the human population has given rise to a variety of industries, which have produced a variety of wastes. Due to their detrimental effects on both human and environmental health, pollutants from industry have taken centre stage among the various types of waste produced. The amount of waste produced has therefore increased the demand for effective waste management. In order to create valuable chemicals for sustainable waste management, trash must be viewed as valuable addition. One of the most environmentally beneficial and sustainable choices is to use garbage to make biosurfactants. The utilization of waste in the production of biosurfactant provides lower processing costs, higher availability of feedstock and environmental friendly product along with its characteristics. The current review focuses on the use of industrial wastes in the creation of sustainable biosurfactants and discusses how biosurfactants are categorized. Waste generation in the fruit industry, agro-based industries, as well as sugar-industry and dairy-based industries is documented. Each waste and wastewater are listed along with its benefits and drawbacks. This review places a strong emphasis on waste management, which has important implications for the bioeconomy. It also offers the most recent scientific literature on industrial waste, including information on the role of renewable feedstock for the production of biosurfactants, as well as the difficulties and unmet research needs in this area.

Sustainable management of plastic wastes in COVID-19 pandemic: The biochar solution

To prevent the COVID-19 transmission, personal protective equipment (PPE) and packaging materials have been extensively used but often managed inappropriately, generating huge amount of plastic waste. In this review, we comprehensively discussed the plastic products utilized and the types and amounts of plastic waste generated since the outbreak of COVID-19, and reviewed the potential treatments for these plastic wastes. Upcycling of plastic waste into biochar was addressed from the perspectives of both environmental protection and practical applications, which can be verified as promising materials for environmental protections and energy storages. Moreover, novel upcycling of plastic waste into biochar is beneficial to mitigate the ubiquitous plastic pollution, avoiding harmful impacts on human and ecosystem through direct and indirect micro-/nano-plastic transmission routes, and achieving the sustainable plastic waste management for value-added products, simultaneously. This suggests that the plastic waste could be treated as a valuable resource in an advanced and green manner.

Single Cell Protein Production Using Different Fruit Waste: A Review

The single cell protein (SCP) technique has become a popular technology in recent days, which addresses two major issues: increasing world protein deficiency with increasing world population and the generation of substantial industrial wastes with an increased production rate. Global fruit production has increased over the decades. The non-edible parts of fruits are discarded as wastes into the environment, which may result in severe environmental issues. These fruit wastes are rich in fermentable sugars and other essential nutrients, which can be effectively utilized by microorganisms as an energy source to produce microbial protein. Taking this into consideration, this review explores the use of fruit wastes as a substrate for SCP production. Many studies reported that the wastes from various fruits such as orange, sweet orange, mango, banana, pomegranate, pineapple, grapes, watermelon, papaya, and many others are potential substrates for SCP production. These SCPs can be used as a protein supplement in human foods or animal feeds. This paper discusses various aspects in regard to the potential of fruit wastes as a substrate for SCP production.

Nano-Structured Carbon: Its Synthesis from Renewable Agricultural Sources and Important Applications

Carbon materials are versatile in nature due to their unique and modifiable surface and ease of production. Nanostructured carbon materials are gaining importance due to their high surface area for application in the energy, biotechnology, biomedical, and environmental fields. According to their structures, carbon allotropes are classified as carbon nanodots, carbon nanoparticles, graphene, oxide, carbon nanotubes, and fullerenes. They are synthesized via several methods, including pyrolysis, microwave method, hydrothermal synthesis, and chemical vapor deposition, and the use of renewable and cheaper agricultural feedstocks and reactants is increasing for reducing cost and simplifying production. This review explores the nanostructured carbon detailed investigation of sources and their relevant reports. Many of the renewable sources are covered as focused here, such as sugar cane waste, pineapple, its solid biomass, rise husk, date palm, nicotine tabacum stems, lapsi seed stone, rubber-seed shell, coconut shell, and orange peels. The main focus of this work is on the various methods used to synthesize these carbon materials from agricultural waste materials, and their important applications for energy storage devices, optoelectronics, biosensors, and polymer coatings.

Effects of microplastics on the terrestrial environment: A critical review

Microplastics are emerging contaminants and there has been growing concern regarding their impacts on aquatic and terrestrial environments. This review provides a comprehensive overview of the current knowledge regarding the sources, occurrences, fates, and risks associated with microplastic contamination in terrestrial environments. This contamination occurs via multiple sources, including primary microplastics (including synthetic materials) and secondary microplastics (derived from the breakdown of larger plastic particles). Microplastic contamination can have both beneficial and detrimental effects on soil properties. Additionally, microplastics have been shown to interact with a wide array of contaminants, including pesticides, persistent organic pollutants, heavy metals, and antibiotics, and may act as a vector for contaminant transfer in terrestrial environments. Microplastics and their associated chemicals can be transferred through food webs and may accumulate across multiple trophic levels, resulting in potential detrimental health effects for humans and other organisms. Although several studies have focused on the occurrence and impacts of microplastic contamination in marine environments, their sources, fate, transport, and effects in terrestrial environments are less studied and not well understood. Therefore, further research focusing on the fate, transport, and impacts of microplastics in relation to soil properties, polymer composition and forms, and land-use types is needed. The development of standardized and harmonized methods for analyzing microplastics in soil-plant ecosystems is essential. Future work should also consider the many interactions of microplastics with soil quality and ecotoxicological impacts on biota in the context of global environmental change.

Soil properties, root morphology and physiological responses to cotton stalk biochar addition in two continuous cropping cotton field soils from Xinjiang, China

Long-term and widespread cotton production in Xinjiang, China, has resulted in significant soil degradation, thereby leading to continuous cropping obstacles; cotton stalk biochar (CSB) addition may be an effective countermeasure to this issue, with effects that are felt immediately by root systems in direct contact with the soil. In this study, we assess the effects of different CSB application rates on soil nutrient contents, root morphology, and root physiology in two soil types commonly used for cotton production in the region. Compared with CK (no CSB addition), a 1% CSB addition increased total nitrogen (TN), available phosphorus (AP), and organic matter (OM) by 13.3%, 7.2%, and 50% in grey desert soil, respectively , and 36.5%, 19.9%, and 176.4%, respectively, in aeolian sandy soil. A 3% CSB addition increased TN, AP, and OM by 38.8%, 23.8%, and 208.1%, respectively, in grey desert soil, and 36%, 13%, and 183.2%, respectively, in aeolian sandy soil. Compared with the aeolian sandy soil, a 1% CSB addition increased TN, OM, and AP by 95%, 94.8%, and 33.3%, respectively, in the grey desert soil , while in the same soil 3% CSB addition increased TN, OM, and AP by 108%, 21.1%, and 73.9%, respectively. In the grey desert soil, compared with CK, a 1% CSB application increased the root length (RL) (34%), specific root length (SRL) (27.9%), and root volume (RV) (32.6%) during the bud stage, increased glutamine synthetase (GS) (13.9%) and nitrate reductase (NR) activities (237%), decreased the RV (34%) and average root diameter (ARD) (36.2%) during the harvesting stage. A 3% CSB addition increased the RL (44%), SRL (20%), and RV (41.2%) during the bud stage and decreased the RV (29%) and ARD (27%) during the harvesting stage. In the aeolian sandy soil, 1% CSB increased the RL (38.3%), SRL (73.7%), and RV (17%), while a 3% caused a greater increase in the RL (55%), SRL (89%), RV (28%), soluble sugar content (128%), and underground biomass (33.8%). Compared with the grey desert soil, a 1% CSB addition increased the RL (48.6%), SRL (58%), and RV (18.6%) in the aeolian sandy soil, while a 3% further increased the RL (54.8%), SRL (84.2%), RV (21.9%), and soluble sugar content (233%). The mechanisms by which CSB addition improves the two soils differ: root morphology changed from coarse and short to fine and long in the grey desert soil, and from fine and long to longer in the aeolian sandy soil. Overall, a 3% CSB addition may be a promising and sustainable strategy for maintaining cotton productivity in aeolian sandy soil in the Xinjiang region.

Sustainable Materials from Fish Industry Waste for Electrochemical Energy Systems

Fish industry waste is attracting growing interest for the production of environmentally friendly materials for several different applications, due to the potential for reduced environmental impact and increased socioeconomic benefits. Recently, the application of fish industry waste for the synthesis of value-added materials and energy storage systems represents a feasible route to strengthen the overall sustainability of energy storage product lines. This review focused on an in-depth outlook on the advances in fish byproduct-derived materials for energy storage devices, including lithium-ion batteries (LIBs), sodium-ion (NIBs) batteries, lithium-sulfur batteries (LSBs), supercapacitors and protein batteries. For each of these, the latest applications were presented together with approaches to improve the electrochemical performance of the obtained materials. By analyzing the recent literature on this topic, this review aimed to contribute to further advances in the sustainability of energy storage devices.