Assisted extraction of rosemary antioxidants with green solvents

Optimization of Combined Ultrasound and Microwave-Assisted Extraction for Enhanced Bioactive Compounds Recovery from Four Medicinal Plants: Oregano, Rosemary, Hypericum, and Chamomile

This study presents the synergistic application of ultrasound- and microwave-assisted extraction (UAE-MAE) as a novel and efficient method for recovering bioactive compounds from the medicinal plants oregano, rosemary, Hypericum perforatum, and chamomile. Extraction parameters, including microwave (MW) power, ultrasound (US) power, and extraction time, were optimized using the response surface methodology (RSM), with ethanol as the solvent. Extracts were evaluated for total phenolic content (TPC) via the Folin-Ciocalteu method and antioxidant activity (IC50) using the DPPH assay. High-performance liquid chromatography with diode array detection (HPLC-DAD) identified the main bioactive compounds contributing to their antioxidant and therapeutic potential. The optimized UAE-MAE conditions enhanced phenolic recovery and antioxidant potential across all plants. Notably, Hypericum perforatum exhibited the highest TPC (53.7 mg GAE/g) and strongest antioxidant activity (IC50 29.8 mg extract/g) under 200 W MW, 450 W US, and 12 min, yielding 14.5%. Rosemary achieved the highest yield (23.36%) with a TPC of 26.35 mg GAE/g and an IC50 of 40.75 mg extract/g at 200 W MW, 700 W US, and 8 min. Oregano's optimal conditions (500 W MW, 700 W US, 12 min) produced a TPC of 34.99 mg GAE/g and an IC50 of 50.31 mg extract/g. Chamomile extracts demonstrated lower phenolic content and antioxidant activity but achieved significant yields under 500 W MW, 700 W US, and 5 min. This study highlights UAE-MAE's superior efficiency, showcasing its potential to maximize phenolic recovery sustainably, making it a promising technique for industrial and therapeutic applications.

Ultrasound-assisted extraction of polyphenols from Phyllanthi Fructus: Comprehensive insights from extraction optimization and antioxidant activity

Phyllanthi Fructus (PF) is a valuable botanical resource with a long history of traditional use, known for potent antioxidant and anti-inflammatory effects attributed to its rich contents of bioactive compounds, particularly polyphenols. However, current extraction techniques limit the utilization of polyphenols from PF. This study aimed to achieve the maximum polyphenol yield and improve the antioxidant activity of PF extracts to promise PF's prospects for modern healthcare. Firstly, ultrasonic-assisted extraction (UAE) was employed to extract the polyphenols in PF and a combination of Plackett-Burman designs (PBD) and response surface methodology (RSM) was applied to optimize UAE's conditions. Next, cellular superoxide dismutase (SOD) and malondialdehyde (MDA) were used to assess the antioxidant activity of extracted polyphenols. Ultra-Performance Liquid Chromatography coupled with Quadrupole Time-of-Flight Mass Spectrometry (UPLC-Q-TOF MS) was utilized to characterize polyphenol components in the PF extracts. Finally, network pharmacology and molecular docking analysis were performed to screen the potential target proteins of polyphenols from PF. As a result, the optimized polyphenol yield was 213.49 mg/g, and the antioxidant activities, measured by ability of DPPH scavenging, ABTS+ scavenging, and FRAP were 76.95 %, 2.24 mmol/g, 2.34 mmol/g, respectively. PF extracts also showed good antioxidant capabilities at cellular level. 26 polyphenol components were identified in the PF extracts. Among these, ellagic acid, myricetin, and eriodictyol may exert antioxidant effects by interacting with AKT serine/threonine kinase 1 (AKT1). In conclusion, our study provides valuable insights into the optimizing PF extraction and underscores its potential applications in enhancing natural polyphenols extraction using UAE with a combination of PBD and RSM. These findings offer a promising avenue for the development and utilization of PF, and could serve as a reference for similar extraction processes in the future.

Extraction of polyphenols and essential oils from herbs with green extraction methods - An insightful review

The demand for polyphenols and essential oils (EOs) on the food market is high and grows every year. Its partially the result of the fact that these compounds can be used in formulation of clean label foods, a fast growing food sector. A significant share of polyphenols and EOs are extracted from herbs. The quality of the extracts is determined mainly by the extraction method. Conventional extraction techniques of phytochemicals are time-consuming, operate at high temperatures, and require usage of organic solvents and energy in large quantities. According to the United Nations Sustainability Development Plan, chemical processes should be replaced by green alternatives that would reduce the use of solvents and energy. Ultrasound-Assisted Extraction (UAE), Microwave-Assisted Extraction (MAE) and Cold Plasma-Assisted Extraction (CPAE) meets these criteria. The review shows that each of these techniques seems to be a great alternative for conventional extraction methods ensuring higher yields of bioactive compounds.

From Waste to Wealth: Exploring the Bioactive Potential of Wine By-Products-A Review

The present paper explores the biological potential of bioactive compounds present in wine industry wastes, highlighting their valorization to promote sustainability and circular economy. Wine by-products, such as grape pomace and vine shoots, contain a high concentration of polyphenols, flavonoids, anthocyanins and other phytochemicals with antioxidant, anti-inflammatory and anticarcinogenic properties. Both conventional extraction methods, such as solid-liquid extraction, and emerging technologies, including enzyme-assisted extraction, ultrasound-assisted extraction, supercritical fluid extraction, microwave-assisted extraction, pressurized liquid extraction, high-hydrostatic-pressure extraction, and deep natural solvent-assisted extraction (NaDES), are discussed. In addition, the preservation of polyphenolic extracts by microencapsulation, a key technique to improve the stability and bioavailability of bioactive compounds, is addressed. The combination of advanced extraction methods and innovative preservation techniques offers a promising perspective for the valorization of bioactive compounds from wine residues, driving sustainability and innovation in the industry.

Ultrasound-assisted and subcritical water extraction techniques for maximal recovery of phenolic compounds from raw ginger herbal dust toward in vitro biological activity investigation

This study examined the impact of two green extraction techniques in order to maximize the usage and recovery of phenolic compounds from the by-product of the filter tea industry, the so-called ginger herbal dust. The main phenolic compounds extraction was performed by ultrasound-assisted extraction (UAE) with the sonication amplitude ranging from 20% to 100%, and the subcritical water extraction (SWE), with the temperature ranging from 120 °C to 220 °C. All obtained extracts were characterized in terms of extraction yield, total phenolic content (TPC), and 6-ginerol, 6-shogaol, and 8-ginerol contents using RP-HPLC-DAD. Based on the results, we selected the extract obtained from raw ginger herbal dust using a sonication amplitude of 100% for further biological investigation of the cytotoxic effect on short- and long-term cell viability on liver and pancreatic cancer cells. This extract contained high TPC concentration, and 6-gingerol (44.57 mg/gDE), 8-gingerol (8.62 mg/gDE), and 6-shogaol (6.92 mg/gDE).

Nanopore analysis of salvianolic acids in herbal medicines

Natural herbs, which contain pharmacologically active compounds, have been used historically as medicines. Conventionally, the analysis of chemical components in herbal medicines requires time-consuming sample separation and state-of-the-art analytical instruments. Nanopore, a versatile single molecule sensor, might be suitable to identify bioactive compounds in natural herbs. Here, a phenylboronic acid appended Mycobacterium smegmatis porin A (MspA) nanopore is used as a sensor for herbal medicines. A variety of bioactive compounds based on salvianolic acids, including caffeic acid, protocatechuic acid, protocatechualdehyde, salvianic acid A, rosmarinic acid, lithospermic acid, salvianolic acid A and salvianolic acid B are identified. Using a custom machine learning algorithm, analyte identification is performed with an accuracy of 99.0%. This sensing principle is further used with natural herbs such as Salvia miltiorrhiza, Rosemary and Prunella vulgaris. No complex sample separation or purification is required and the sensing device is highly portable.

Sustainable Recovery of Phenolic Compounds from Distilled Rosemary By-Product Using Green Extraction Methods: Optimization, Comparison, and Antioxidant Activity

Rosemary solid distillation waste (SWR), a by-product of the essential oil industry, represents an important source of phenolic antioxidants. Green technologies such as ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), and accelerated solvent extraction (ASE) of phenolic compounds from SWR were optimized as valorization routes to maximize yield, rosmarinic acid (RMA), carnosol (CARO) and carnosic acid (CARA) contents. Response surface methodology was used in this context, with ethanol concentration (X1), extraction temperature (X2), and time (X3) being the independent variables. A second-order polynomial model was fitted to the data, and multiple regression analysis and analysis of variance were used to determine model fitness and optimal conditions. Ethanol concentration was the most influential extraction parameter, affecting phenolic compounds, while the influence of other parameters was moderate. The optimized conditions were as follows: X1: 67.4, 80.0, and 59.0%, X2: 70, 51, and 125 °C, and X3: 15, 10, and 7 min for MAE, UAE, and ASE, respectively. A comparison of optimized MAE, UAE, and ASE with conventional Soxhlet extraction techniques indicated that ASE provided a higher extraction yield and content of phenolic compounds. However, UAE represented the best process from an environmental point of view, allowing an improved extraction of phenolics from SWR with high energy efficiency and low energy costs.

Grape Pomace as a Natural Source of Phenolic Compounds: Solvent Screening and Extraction Optimization

The optimization of extraction by using solvents of phenolic compounds (TPh) of grape pomace (GP) based on a central composite design was investigated. The GP was characterized, and preliminary assays were conducted with five different solvents (water, ethanol, acetone, methanol, and butanol) and the aqueous mixtures thereof. Ethanol and acetone were revealed to be the best solvents for TPh extraction. The main extraction parameters (temperature—T, time—t, solvent concentration, and liquid–solid ratio—L/S) were optimized by using a central composite design. The optimized conditions for the ethanol extraction (T = 60 °C, t = 1.5 h, L/S = 25 mL/gdryGP) and for acetone (T = 50 °C, t = 1.5 h, L/S = 25 mL/gdryGP) were determined. Single-stage extraction revealed a TPh of 45.18 ± 9.51 mgGAE/gdryGP for acetone and a TPh of 38.70 ± 3.64 mgGAE/gdryGP for ethanol. The characterization of the extracts revealed the presence of gallic acid, caffeic acid, syringic acid, vanillic acid, chlorogenic acid, and p-coumaric acid, where the concentration of the first three compounds stands out in all extracts. A three-stage extraction increased the yield of ethanol to 63.3 mg GAE/gdryGP and the yield of acetone to 59.2 mg GAE/gdryGP. Overall, both solvents allow the extraction of phenolic compounds of grape pomace, but ethanol is commonly considered a greener solvent for this purpose.

Impact of the Extraction Method on the Chemical Composition and Antioxidant Potency of Rosmarinus officinalis L. Extracts

Rosmarinus officinalis L. is a dietary source that produces polyphenols as secondary metabolites. These natural compounds with potent antioxidant abilities are increasingly recommended as a supplement to inhibit oxidative stress. In the current work, we evaluated the impact of the extraction method on the chemical composition of R. officinalis extract, especially on the content of carnosic (CA) and rosmarinic (RA) acids using UPLC-MS-DAD as well as on their antioxidant potency. Four extracts of Tunisian rosemary were obtained from non-conventional extraction techniques:ultrasound-assisted extraction (UAE),supercritical extraction (SFE) and UAE and SFE combined ((UAE-SFE(I), UAE-SFE(II)). The UAE exhibited the best total phenolic compounds (i.e., 85.27 mg GAEg^-1), the highest content of CAand RA and the strongest antioxidant abilities (i.e., IC₅₀ = 0.13 mg/mL and EC₅₀ = 0.93 mg/mL for DPPH scavenging test and iron reducing power ability assay). The evaluation of antioxidant activity of UAE inhuman skin fibroblast (HS-68) cell line was carried out after the induction of oxidative stress. The results determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed a strong protective effect against H₂O₂oxidative stress induction in cells pretreated with UAE. The obtained results allow us to give new insight about the effect of the extraction method on the chemical composition and biological activities of the extract and the importance of the choice of the most appropriate processing technique to prepare rosemary extract with a high antioxidant potency and protective effect against oxidative stress.

Major Phytochemical Compounds, In Vitro Antioxidant, Antibacterial, and Antifungal Activities of Six Aqueous and Organic Extracts of Crocus sativus L. Flower Waste

PURPOSE

After being considered as a neglected product, agricultural waste is nowadays considered of paramount importance. It has become a source of many chemical compounds with industrial, pharmaceutical, and food applications. This study aims to evaluate the primary phytochemical content, the antioxidant properties, and the antimicrobial activities of different extracts of saffron flower waste (SFE) against bacterial and fungal strains involved in diverse pathologies in southern Morocco.

METHODS

Total phenolic and flavonoid contents were determined. The antioxidant potentials were assessed by DPPH, FRAP, and β-carotene assays. The antimicrobial activity against four bacteria and four fungi was also evaluated. The findings in terms of the relationships between phytochemical content and all activities were depicted by PCA analyses.

RESULTS

SFEs contained large amounts of phenolic and flavonoid compounds that contribute to the significant antioxidant activities. Diethyl ether (DE), n-Butanol (n-B), and Ethyl acetate (EA) fractions respectively exhibited more DPPH scavenging capacity, FRAP reducing power, and β-carotene bleaching inhibition. DE and EA have a remarkable effect mainly against Staphylococcus aureus strain, compared to Listeria monocytogenes, Escherichia coli and Klebsiella pneumoniae. Both SFEs showed antifungal antagonism towards key fungi species involved in post-harvest mold and crop yield losses. Botrytis cinerea was more susceptible than Fusarium solani, Penicillium expansum, and Penicillium digitatum.

CONCLUSION

These results reveal new data about extracts obtained from SFE that could be a potential source of natural antioxidant and antimicrobial agents opening new possibilities for their applications in the food system as a natural preservative and a sustainable alternative to conventional ingredients.

An Overview on the Use of Extracts from Medicinal and Aromatic Plants to Improve Nutritional Value and Oxidative Stability of Vegetable Oils

Oil oxidation is the main factor limiting vegetable oils' quality during storage, as it leads to the deterioration of oil's nutritional quality and gives rise to disagreeable flavors. These changes make fat-containing foods less acceptable to consumers. To deal with this problem and to meet consumer demand for natural foods, vegetable oil fabricators and the food industry are looking for alternatives to synthetic antioxidants to protect oils from oxidation. In this context, natural antioxidant compounds extracted from different parts (leaves, roots, flowers, and seeds) of medicinal and aromatic plants (MAPs) could be used as a promising and sustainable solution to protect consumers' health. The objective of this review was to compile published literature regarding the extraction of bioactive compounds from MAPs as well as different methods of vegetable oils enrichment. In fact, this review uses a multidisciplinary approach and offers an updated overview of the technological, sustainability, chemical and safety aspects related to the protection of oils.

Antioxidant and antimicrobial chitosan films enriched with aqueous sage and rosemary extracts as food coating materials: Characterization of the films and detection of rosmarinic acid release

Chitosan films containing aqueous extracts of sage and rosemary were prepared as a potential food coating material with antioxidant and antibacterial properties. The effect of adding extracts at different concentrations on the mechanical, physical, and optical properties of the films was investigated. The addition of the extracts significantly increased Young's modulus values of the films compared to the chitosan film, and a significant decrease was observed in the swelling percentage and water vapor permeability of the films. Since all the prepared films were ionically cross-linked, the increase in water solubility of the films with the addition of the extract was at a low level. The release of rosmarinic acid, which is found in significant amounts in both plants, from the films was monitored by the capillary electrophoresis. The antioxidant properties imparted to the films by the addition of plant extracts were determined by DPPH and FRAP methods. The addition of plant extracts increased the antimicrobial property of chitosan films against Staphylococcus aureus and Escherichia coli. Films containing sage and rosemary extracts showed potential for use as food coating materials.

Spearmint (Mentha spicata L.) Phytochemical Profile: Impact of Pre/Post-Harvest Processing and Extractive Recovery

The purpose of this study was to chemically compare samples of Mentha spicata (marketing byproducts, production byproducts, and export material), cultivated in the open field and under greenhouse, using an integrated approach by HPLC/DAD and GC/MS analysis. The presence of phenolic compounds was higher in the marketing byproducts cultivated in the open field. Marketing byproducts also had the highest amount of carvone. For this reason, this byproduct was selected as a candidate for the development of natural ingredients. With the best selected material, the optimization of simultaneous high-intensity ultrasound-assisted extraction processes was proposed for the recovery of the compounds of interest. This extraction was defined by Peleg’s equation and polynomial regression analysis. Modeling showed that the factors amplitude, time, and solvent were found to be significant in the recovery process (p < 0.005). The maximum amount of compounds was obtained using 90% amplitude for 5 min and ethanol/water mixture (80:20) for extraction to simultaneously obtain phenolic and terpenoid compounds. This system obtained the highest amount of monoterpenoid and sesquiterpenoid compounds from the essential oil of M. spicata (64.93% vs. 84.55%). Thus, with an efficient and eco-friendly method, it was possible to optimize the extraction of compounds in M. spicata as a starting point for the use of its byproducts.

Effect of Extraction Method on the Bioactive Composition, Antimicrobial Activity and Phytotoxicity of Pomegranate By-Products

Pomegranate by-products can be an asset to the food industry due to the richness in bioactive and antimicrobial compounds. This work studied the influence of conventional solvent and sonication-assisted extraction methods on the bioactive profile, antimicrobial properties, and phytotoxicity effect of the peels and seeds extracts from Acco, Big Full, and Wonderful pomegranate cultivars. The bioactive composition of the extracts was evaluated for the content of total phenolics, total flavonoids, and antioxidant activity (expressed as the half-maximal inhibitory concentration—IC₅₀) by spectrophotometric methods, while the tannins were determined by titration and the anthocyanins were estimated by the pH-differential method. For the evaluation of the antimicrobial activity, the disk diffusion method of Kirby-Bauer was adapted through inhibition halos against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Bacillus cereus, and Yarrowia lipolytica. The extracts’ phytotoxicity was evaluated in vitro on garden-cress seeds. Extracts from conventional extraction were richer in total phenolics, expressed as gallic acid equivalents (0.16–0.73 mg GAE/mg extract), while those from sonication-assisted extraction had higher contents of total flavonoids, expressed as catechin equivalents (0.019–0.068 mg CATE/mg extract); anthocyanins, expressed as cyanidin-3-glucoside (0.06–0.60 µg C3G/mg, dry basis); and antioxidant activity (IC₅₀, 0.01–0.20 mg/mL). All extracts were more effective against Gram-positive bacteria and yeasts than Gram-negative bacteria. In general, the sonication-assisted extracts led to higher inhibition halos (8.7 to 11.4 mm). All extracts presented phytotoxicity against garden-cress seeds in the tested concentrations. Only the lowest concentration (0.003 mg/mL) enabled the germination of seeds and root growth, and the sonication-assisted extracts showed the highest Munoo-Liisa vitality index (51.3%). Overall, sonication-assisted extraction obtained extracts with greater bioactive and antimicrobial potential and less phytotoxicity.

Extraction, Purification and In Vitro Antioxidant Activity Evaluation of Phenolic Compounds in California Olive Pomace

Olive pomace (OP) is a valuable food byproduct that contains natural phenolic compounds with health benefits related to their antioxidant activities. Few investigations have been conducted on OP from the United States while many studies on European OP have been reported. OP of Arbequina, the most common cultivar from California, was collected and extracted by water, 70% methanol and 70% ethanol, followed by purification using macroporous absorbing resin. Results showed that the extractable total phenolic content (TPC) was 36–43 mg gallic acid equivalents (GAE)/g in pitted, drum-dried defatted olive pomace (DOP), with major contributions from hydroxytyrosol, oleuropein, rutin, verbascoside, 4-hydroxyphenyl acetic acid, hydroxytyrosol-glucoside and tyrosol-glucoside. Macroporous resin purification increased TPC by 4.6 times the ethanol crude extracts of DOP, while removing 37.33% total sugar. The antioxidant activities increased 3.7 times Trolox equivalents (TrE) by DPPH and 4.7 times TrE by ferric reducing antioxidant power (FRAP) in the resin purified extracts compared to the ethanol crude extracts. This study provided a new understanding of the extraction of the bioactive compounds from OP which could lead to practical applications as natural antioxidants, preservatives and antimicrobials in clean-label foods in the US.

Betalain plant sources, biosynthesis, extraction, stability enhancement methods, bioactivity, and applications

Betalains are plant pigments with functional properties used mainly as food dyes. However, they have been shown to be unstable to different environmental factors. This paper provides a review of (1) Betalain plant sources within several plant families such as Amaranthaceae, Basellaceae, Cactaceae, Portulacaceae, and Nyctaginaceae, (2) The biosynthesis pathway of betalains for both betacyanins and betaxanthins, (3) Betalain extraction process, including non-conventional technologies like microwave-assisted, ultrasound-assisted, and pulsed electrical field extraction, (4) Factors affecting their stability, mainly temperature, water activity, light incidence, as well as oxygen concentration, metals, and the presence of antioxidants, as well as activation energy as a mean to assess stability, and novel food-processing technologies able to prevent betalain degradation, (5) Methods to increase shelf life, mainly encapsulation by spray drying, freeze-drying, double emulsions, ionic gelation, nanoliposomes, hydrogels, co-crystallization, and unexplored methods such as complex coacervation and electrospraying, (6) Biological properties of betalains such as their antioxidant, hepatoprotective, antitumoral, and anti-inflammatory activities, among others, and (7) Applications in foods and other products such as cosmetics, textiles and solar cells, among others. Additionally, study perspectives for further research are provided for each section.

LC-MS Identification and Quantification of Phenolic Compounds in Solid Residues from the Essential Oil Industry

Plant solid residues obtained from the essential oil industry represent a rich source of phenolic compounds with bioactive properties to be used in the food and pharmaceutical industries. A selective and sensitive liquid chromatography-mass spectrometry (LC-MS) method was developed for the simultaneous determination of phenolic compounds in solid residues of the Lamiaceae family plants. A total of 48 compounds can be separated within 35 min by using the Poroshell-120 EC-C₁₈ column, and a gradient mobile phase of 0.1% formic acid and acetonitrile with flow rate of 0.5 mL/min; salicylic acid was used as internal standard. The calibration curves showed good linearity in the tested concentration range for each analyte (R² > 0.9921), while recoveries ranged from 70.1% to 115.0% with an intra-day and inter-day precision of less than 6.63% and 15.00%, respectively. Based on the retention behavior, as well as absorption and mass spectra, 17 phenolic acids, 19 flavonoids and 2 phenolic diterpenes were identified and quantified in the solid residues obtained by distillation of six aromatic plants: oregano, rosemary, sage, satureja, lemon balm, and spearmint. The method constitutes an accurate analytical and quality control tool for the simultaneous quantitation of phenolics present in solid waste residues from the essential oil industry.

Integrated management of residues from tomato production: Recovery of value-added compounds and biogas production in the biorefinery context

The biorefinery approach must be boosted in the management of agro-residues in the future. The present study aims to investigate the valorization of tomato production residues, namely rotten tomato (unfit for consumption - RT), green tomato (GT), and tomato branches (TB). The assessment involves the recovery of value-added compounds through the extraction process followed by biogas production through anaerobic digestion. A thorough characterization of the three residues (RT, GT, and TB) was carried out, including the identification of volatile compounds by solid-phase microextraction (SPME) and gas chromatography/mass spectrometry (GC/MS). The volatiles analysis revealed the presence of flavor enhancer compounds and molecules with insecticidal properties. A solid-liquid extraction with ethanol allowed the recovery of value-added compounds in the extracts, in particular phenolic compounds, β-carotene, and lycopene, which contributed to the antioxidant activity. RT and TB extracts were found to be richer in total phenolic compounds (~27 mg GAE/g_db dry basis) and exhibited higher antioxidant activity (IC₅₀ = 0.911 and 0.745 mg/mL). The tomato branches extract had the highest concentration of carotenoids with 37.23 and 3.08 mg/kg_db of β-carotene and lycopene, respectively. The biochemical methane potential (BMP) was assessed in sealed reactors operating in anaerobic conditions for all the raw (RT, GT, and TB) and extracted substrates waste (RTe, GTe, and TBe). While the BMP of RT and GT was in the range of 232-285 mL CH₄/g VS, a lower value of 141 mL CH₄/g VS was obtained for TB. The methane production for each pair of raw and extracted substrates (RT/RTe, GT/GTe, and TB/TBe) was considered statistically similar at a 95 % confidence level. Overall, the value-added compounds recovery through ethanolic extraction did not compromise the methane production of the materials.

The use of ultrasound in the South Cone region. Advances in organic and inorganic synthesis and in analytical methods

In organic and inorganic synthesis and in analytical methods, an external conventional heat source is usually applied to carry out a chemical reaction at a high temperature, or an extraction procedure. In the last decades, the use of ultrasound as an alternative energy source has become an interesting field of research in these topics in the South Cone region (Argentina, Chile, Uruguay, Southern Brazil and Paraguay). For this reason, the present review, covering the period 2009 to mid-2021, is a compilation of ultrasound-assisted synthetic and analytical methodologies.

Efficiency of sea buckthorn extract in oxidative stability improvement of high oleic sunflower oil

Sea buckthorn (Hippophae rhamnoides) with high antioxidant capacity is distributed all over the world, but has never been used as a natural antioxidant in oils to replace synthetic antioxidants. Therefore, this study was performed to investigate the effectiveness of sea buckthorn extract in comparison to a common natural antioxidant rosemary extract and a synthetic antioxidant on retarding lipid oxidation. First the extracts were characterised, and it was found that sea buckthorn extract had higher polyphenol contents, radical scavenging activity, and higher antioxidant capacity. Then the proper concentrations for the use of these antioxidants were determined. Additionally, the progress of lipid oxidation during cycles of frying was assessed in terms of free fatty acids content, peroxide value, p-anisidine value, TOTOX value, colour, total polar compounds, and Induction period. The general order of effectiveness for inhibition of high oleic sunflower oil degradation during frying was: sea buckthorn > BHT > rosemary > control (P <0.05).

Rosmarinic Acid and Ulvan from Terrestrial and Marine Sources in Anti-Microbial Bionanosystems and Biomaterials

In order to increase their sustainability, antimicrobial renewable molecules are fundamental additions to consumer goods. Rosmarinic acid is extracted from several terrestrial plants and represents an effective anti-microbial agent. Ulvan, extracted from algae, is an anti-microbial polysaccharide. The present review is dedicated to discussing the sources and the extraction methodologies for obtaining rosmarinic acid and ulvan. Moreover, the preparation of bioanosystems, integrating the two molecules with organic or inorganic substrates, are reviewed as methodologies to increase their effectiveness and stability. Finally, the possibility of preparing functional biomaterials and anti-microbial final products is discussed, considering scientific literature. The performed analysis indicated that the production of both molecules is not yet performed with mature industrial technologies. Nevertheless, both molecules could potentially be used in the packaging, biomedical, pharmaceutical, cosmetic, sanitary and personal care sectors, despite some research being required for developing functional materials with specific properties to pave the way for many more applications.

Bioactive compounds and antioxidant activities in the agro-industrial residues of acerola (Malpighia emarginata L.), guava (Psidium guajava L.), genipap (Genipa americana L.) and umbu (Spondias tuberosa L.) fruits assisted by ultrasonic or shaker extraction

The aim of this study was to analyze the residue powders of Malpighia emarginata L., Psidium guajava L., Genipa americana L. and Spondias tuberosa L. regarding their total phenolic compounds contents, antioxidant activity (ABTS, DPPH and FRAP), soluble sugars, carotenoids, organic acids by HPLC-DAD/RID and individual phenolic compounds by the UPLC-QDa-MS system. The genipap residue had a high content of soluble sugars (422.72 ± 19.15 mg.g^-1 DW), with a higher content of sucrose (170.83 ± 10.89 mg.g^-1 DW). Nystose was found in the residues of guava (6.59 ± 0.56 mg.g^-1 DW) and umbu (65.61 ± 2.31 mg.g^-1 DW). The residues of acerola and umbu showed contents of β-carotene of 5.84 ± 0.01 mg.g^-1 DW and 0.10 ± 0.05 mg.g^-1 DW, respectively while high concentration (1116.00 ± 2.00 mg.100 g^-1 DW) of tartaric acid was found in acerola residue and quinic acid (6340 ± 104.00 mg.100 g^-1 DW) in umbu residue. Acetone (80%) and ultrasonic extraction were the best conditions for the residues of acerola, guava and genipap, however, for the umbu residue, extraction with shaker showed better results. The acerola and umbu residues showed higher yields of total phenolics, the values being 378.69-444.05 mg GAE.100 g^-1 DW and 326.14-404.36 mg GAE.100 g^-1 DW, respectively, as well as antioxidant activity. Naringenin was the individual phenolic compound with the highest concentration in the residue of acerola and genipap, vanillin in guava and rutin in umbu. Thus, residues powders from acerola, guava, genipap and umbu constitute potential sources of bioactive compounds, which could be used in the food, pharmaceutical and cosmetic industries.

Stabilization Effects of Natural Compounds and Polyhedral Oligomeric Silsesquioxane Nanoparticles on the Accelerated Degradation of Ethylene-Propylene-Diene Monomer

In this work the analysis on the stabilization activities of some natural antioxidants (rosemary extract, capsaicin, quercetin or oleanolic acid) is presented. A similar contribution of an inorganic structure-polyhedral oligomeric silsesquioxane (POSS) nanoparticles-is also evaluated. The stabilization effects on the oxidation protection were investigated for several formulations based on ethylene-propylene-diene-terpolymer (EPDM). The samples were examined in pristine state or after γ-irradiation, when the accelerated degradation scission of polymer macromolecules followed by the mitigation of oxidation. Three evaluation procedures: chemiluminescence, FTIR spectroscopy and thermal analysis were applied for the characterization of stability efficiency. The delaying effect of oxidative aging in EPDM matrix is illustrated by the values of activation energy, which are correlated with the type and concentration of embedded compounds. The durability of studied EPDM formulations is discussed for the assessment of material life. The improved behavior of structured hybrids useful for the optimization application regimes is essentially based on the antioxidant properties of polyphenolic components in the cases of natural antioxidants or on the penetration of free radical intermediates into the free volumes of POSS.

Biocompounds recovery from olive mill wastewater by liquid-liquid extraction and integration with Fenton's process for water reuse

The olive mill wastewaters obtained from two different processes, press extraction olive mill wastewater (POMW) from Portugal and two-phase system olive mill wastewater (2POMW) from Spain, were treated to recover phenolic compounds and water sequentially, by the integration of liquid-liquid extraction with Fenton's processes. From the recovered fractions, squalene, oleic acid, tyrosol, syringic acid, and p-coumaric acid were identified, and oleic acid appears in a higher concentration for 2POMW wastewater for all used solvents compared to POMW samples. Recovered fractions presented higher antioxidant activity, but remained antioxidants were found in the residual water. The wastewaters coming from a two-phase extraction method (2POMW) present higher phytotoxicity according to germination index, but the application of Fenton's process was able to improve the water quality to be re-used since an increase on the water biodegradability (BOD5/COD) and toxicity reduction were achieved.

Six Common Herbs with Distinctive Bioactive, Antioxidant Components. A Review of Their Separation Techniques

Rosemary, oregano, pink savory, lemon balm, St. John’s wort, and saffron are common herbs wildly grown and easily cultivated in many countries. All of them are rich in antioxidant compounds that exhibit several biological and health activities. They are commercialized as spices, traditional medicines, or raw materials for the production of essential oils. The whole herbs or the residues of their current use are potential sources for the recovery of natural antioxidant extracts. Finding effective and feasible extraction and purification methods is a major challenge for the industrial production of natural antioxidant extracts. In this respect, the present paper is an extensive literature review of the solvents and extraction methods that have been tested on these herbs. Green solvents and novel extraction methods that can be easily scaled up for industrial application are critically discussed.

Conventional and Enzyme-Assisted Extraction of Rosemary Leaves (Rosmarinus officinalis L.): Toward a Greener Approach to High Added-Value Extracts

The effect of different extraction methods of rosemary leaves on the total phenolic content (TPC), and the antioxidant activity of the extracts was herein investigated. Firstly, the solid-liquid conventional extraction (CEM) and microwave-assisted extraction (MAE) were implemented in an effort to identify the effect of the solvent and of microwave irradiation on the extract quality. The extract obtained from CEM at room temperature, using ethanol/water 95:5 v/v, showed the highest antioxidant activity (IC50 = 12.1 μg/mL). MAE using ethanol/water 50:50 v/v provided an extract with TPC and DPPH radical scavenging ability in a significantly shorter extraction time (1 h for MAE and 24 h for CEM). Enzyme-assisted extraction (EAE) using five commercial enzyme formulations was implemented, and the kinetic equation was calculated. Finally, the effect of EAE as a pretreatment method to CEM was examined. Pretreatment of the plant material with pectinolytic enzymes for 1 h prior to a 24 h CEM with 50% hydroethanolic solvent was found to be the optimum conditions for the extraction of rosemary leaves, providing an extract with higher DPPH radical scavenging ability (IC50 14.3 ± 0.8 μg/mL) and TPC (15.2 ± 0.3 mgGAE/grosemary) than the corresponding extract without the enzyme pretreatment.

Environmentally Friendly Techniques and Their Comparison in the Extraction of Natural Antioxidants from Green Tea, Rosemary, Clove, and Oregano

Many current food and health trends demand the use of more ecological, sustainable, and environmentally friendly techniques for the extraction of bioactive compounds, including antioxidants. However, extraction yields and final antioxidant activities vary between sources and are highly influenced by the given extraction method and nature and ratio of the employed solvent, especially for total polyphenols, flavonoids, and anthocyanins, which are well recognized as natural antioxidants with food applications. This review focused on the most common extraction techniques and potential antioxidant activity in the food industry for various natural antioxidant sources, such as green tea, rosemary, clove, and oregano. Green extraction techniques have been proven to be far more efficient, environmentally friendly, and economical. In general, these techniques include the use of microwaves, ultrasound, high hydrostatic pressure, pulsed electric fields, enzymes, and deep eutectic solvents, among others. These extraction methods are described here, including their advantages, disadvantages, and applications.

Assessment of Fennel Oil Microfluidized Nanoemulsions Stabilization by Advanced Performance Xanthan Gum

In this work, nanoemulsion-based delivery system was developed by encapsulation of fennel essential oil. A response surface methodology was used to study the influence of the processing conditions in order to obtain monomodal nanoemulsions of fennel essential oil using the microchannel homogenization technique. Results showed that it was possible to obtain nanoemulsions with very narrow monomodal distributions that were homogeneous over the whole observation period (three months) when the appropriate mechanical energy was supplied by microfluidization at 14 MPa and 12 passes. Once the optimal processing condition was established, nanoemulsions were formulated with advanced performance xanthan gum, which was used as both viscosity modifier and emulsion stabilizer. As a result, more desirable results with enhanced physical stability and rheological properties were obtained. From the study of mechanical spectra as a function of aging time, the stability of the nanoemulsions weak gels was confirmed. The mechanical spectra as a function of hydrocolloid concentration revealed that the rheological properties are marked by the biopolymer network and could be modulated depending on the amount of added gum. Therefore, this research supports the role of advanced performance xanthan gum as a stabilizer of microfluidized fennel oil-in-water nanoemulsions. In addition, the results of this research could be useful to design and formulate functional oil-in-water nanoemulsions with potential application in the food industry for the delivery of nutraceuticals and antimicrobials.

Selected Aspects Related to Medicinal and Aromatic Plants as Alternative Sources of Bioactive Compounds

Natural compounds obtained from different medicinal and aromatic plants have gained respect as alternative treatments to synthetic drugs, as well as raw materials for different applications (cosmetic, food and feed industries, environment protection, and many others). Based on a literature survey on dedicated databases, the aim of the present work is to be a critical discussion of aspects regarding classical extraction versus modern extraction techniques; possibilities to scale up (advantages and disadvantages of different extraction methods usually applied and the influence of extraction parameters); and different medicinal and aromatic plants' different applications (medical and industrial applications, as well as the potential use in nanotechnology). As nowadays, research studies are directed toward the development of modern, innovative applications of the medicinal and aromatic plants, aspects regarding future perspectives are also discussed.

Potato peel extracts as an antimicrobial and potential antioxidant in active edible film

Potato peel is phenolic-rich plant byproduct that has multiple biological functions. The study explores the antimicrobial efficiency of the peel and its antioxidant potential incorporated with potato starch film. Antimicrobial sensitivity test using microdilution and diffusion test revealed positive response in Escherichia coli, Salmonella enterica, and Staphylococcus aureus with minimum inhibitory concentration, 7.5 ± 2, 5.8 ± 2, and 4.7 ± 1 mg/ml, respectively, but had a negative response for Klebsiella pneumoniae and Listeria monocytogenes. HPLC analysis revealed that caffeic, chlorogenic, and neochlorogenic acids are the main chemical compounds found in potato peel extract and responsible for its antimicrobial property. The scavenging ability and phenolic content in the active film range from 10 to 22 mg GAE/g of the dried film with 24%-55% of inhibition, respectively. The scanning electron microscope of the starch film showed homogeneously and ordered structure; however, some cracks and pores shown in the active film. The simulation experiment of phenols migration from the film into fatty and aqueous foods showed higher concentration in aqueous and less in the fatty foods. Therefore, potato peel extract has antibacterial as well as antioxidant property and incorporating with potato starch produce an active film which can be used as an alternative technology for active food packaging.

Supercritical Fluid Chromatography development of a predictive analytical tool to selectively extract bioactive compounds by supercritical fluid extraction and pressurised liquid extraction

Selective extraction is a great concern in the field of natural products. The interest is to apply specific conditions favouring the solubility of targeted secondary metabolites and avoiding the simultaneous extraction of unwanted ones. Different ways exist to reach selective extractions with suited conditions. These conditions can be determined from experimental studies through experimental design, but a full experimental design takes time, energy, and uses plant samples. Prediction from varied solubility models can also be applied allowing a better understanding of the final selected conditions and eventually less experiments. The aim of this work was to develop and use a chromatographic model to determine optimal extraction conditions without the need for numerous extraction experiments. This model would be applied on the selective extraction of the desired antioxidant compounds in rosemary leaves (rosmarinic and carnosic acids) vs chlorophyll pigments to limit the green colour in extracts. This model was achieved with Supercritical Fluid Chromatography (SFC) and then applied to Supercritical Fluid Extraction (SFE) and Pressurised Liquid Extraction (PLE) assays. SFC models predicted low solubility of chlorophylls for low (5%) and high (100%) percentage of solvent in carbon dioxide. Also, low solubility was predicted with acetonitrile solvent compared to methanol or ethanol. This was confirmed with different extractions performed using SFE with different percentages of solvent (5, 30, and 70%) and with the three solvents used in the SFC models (acetonitrile, methanol and ethanol). Also extractions using PLE were carried out using the same neat solvents in order to confirm the SFC models obtained for 100% of solvent. Globally, extractions validated the SFC models. Only some differences were observed between ethanol and methanol showing the complexity of plant extraction due to matrix effect. For all these extracts, the content of carnosic acid and rosmarinic acid was also monitored and selective extraction conditions of bioactive compounds could be determined.

Extraction Kinetics of Phenolic Antioxidants from the Hydro Distillation Residues of Rosemary and Effect of Pretreatment and Extraction Parameters

Rosemary residue, remaining after the distillation of essential oil, is currently unexploited, while it is a source of phenolic antioxidant components. This raw material was used for the extraction of phenolic compounds by aqueous ethanol or acetone in a continuously stirred reactor. The experimental results were fitted with a two-stage diffusion model. The highest extraction rates, total phenolic content (TPC) recovery, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity were obtained by acetone 60% and ethanol 60%. Grinding of the raw material enhanced the extraction rate and increased TPC yield and antioxidant capacity as the particle size decreased. Pre-treatment by maceration in water (4 h) dissolved a high amount of TPC and shortened the extraction time, while the combination with the pulsed electric field process did not provide further improvement. The use of ultrasound increased the efficiency of the extraction.

Valorization of Sweet Lime Peel for the Extraction of Essential Oil by Solvent Free Microwave Extraction Enhanced with Ultrasound Pretreatment

Essential oils of sweet lime peel, a waste by-product in the juice industry, were extracted using the vacuum assisted solvent free microwave extraction (VASFME) method. The effects of microwave output power (500–1000 W) and extraction time (20–30 min) on the essential oils yield and antimicrobial property were investigated. Optimal conditions were observed at 797.844 W microwave output power and 30 min extraction time. The essential oils yield and antimicrobial property under these conditions were 0.792 ± 0.03% and 18.25 ± 1.45 mm, respectively, which agrees with the predicted values of 0.757% and 16.50 mm. The essential oils were extracted at optimized conditions and analyzed through GCMS for compound identification. A total of 49 compounds were identified, with limonene content (43.47%) being the highest among all sweet lime peel oil compounds. Moreover, the sweet lime peels were subjected to ultrasound pre-treatment before microwave extraction. The ultrasound pre-treatment helped to increase the essential oils yield from 0.84 to 1.06% as the treatment time increased from 30 to 90 min. The increase in yield was 37.66% more compared to VASFME at 90 min treatment time.

Spray-Dried Structured Lipid Carriers for the Loading of Rosmarinus officinalis: New Nutraceutical and Food Preservative

Rosemary, an aromatic herb with significant antioxidative activity, is frequently used as food preservative and a source of nutraceuticals. Its antioxidant effect is mainly related to the presence of phenolic compounds, molecules considerably unstable and prone to irreversible physicochemical changes when exposed to external agents. We here proposed the loading of rosemary into structured lipid systems to improve its physicochemical properties. Four formulations were prepared using the same amount of rosemary lyophilized extract. The lipid phase was composed of stearic acid and oleic acid, and the aqueous phase, a varying combination of drying carriers (whey protein concentrate or gum Arabic) and surfactant (Poloxamer 188). The formulations were sonicated, spray-dried, and the obtained powders were characterized regarding the density (0.18 g/mL to 0.26 g/mL), particle size distribution (7 µm and 52 µm), and water solubility (29% to 48%). The antioxidant activity was determined by applying ABTS•+ radical-scavenging assay and the results expressed per gram of lyophilized extract (150.6 μmol Trolox/g to 376.4 μmol Trolox/g), with a significantly lower/higher result seen for formulations containing gum Arabic and a higher concentration of Poloxamer. The prepared systems may have potential applications as preservative in foodstuff and as nutraceutical.

Improvement of bioactive compounds content in granadilla (Passiflora ligularis) seeds after solid-state fermentation

Fermentation improves the bioactivity of fruit by-products; therefore, this study aimed to increase the bioactive compound content in granadilla (Passiflora ligularis) seed flour (with 50% and 70% initial moisture) through solid-state fermentation using the fungus Aspergillus niger. The extracts were obtained with distilled water, 40% acetone, 80% acetone, 40% ethanol, or 80% ethanol. The highest total phenolic (4713.3 of gallic acid equivalent/100 g of granadilla seed flour in dry basis) and total flavonoid (1910.4 mg of quercetin/100 g of granadilla seed flour in dry basis) contents were obtained with granadilla flour at 50% initial moisture fermented for 48 h with 80% acetone extractor solvent. The highest antioxidant activity was obtained with 80% acetone from flour fermented for 168 h. The chromatographic analysis showed 10 compounds identified in the 80% acetone extracts of fermented flour; gallic acid and epigallocatechin were the major compounds. Gallic acid, catechin, 6,2'-di-hydroxyflavone, ethyl gallate and coumarin had higher concentrations in extracts of fermented flours when compared with unfermented ones. Only fermented flours showed the presence of protocatechuic acid compound. The solid-state fermentation was efficient to obtain extracts of granadilla seed flour enrichment of antioxidant bioactive compounds with potential of application in food, cosmetic and pharmaceutical industries.

Recovery of Phytochemicals via Electromagnetic Irradiation (Microwave-Assisted-Extraction): Betalain and Phenolic Compounds in Perspective

Food colorants processed via agro-industrial wastes are in demand as food waste management becomes vital not only for its health benefits but also for cost reduction through waste valorization. Huge efforts have been made to recover valuable components from food wastes and applied in various fields to prove their versatility rather than for feed ruminant usage only. Betalains and phenolics, antioxidant-rich compounds responsible for host color and so commonly used as natural colorants in food and cosmetic industries, are copiously present in several kinds of fruits and vegetables as well as their wastes. Technological innovation has brought extensive convenient ways of bioactive compounds extraction with many advantages like less use of solvents and energy in a short period of processing time in comparison with the classical solid–liquid extraction methods. Emerging technologies, particularly microwave irradiation, have been amenable to electromagnetic technology for decades. Practically, they have been deployed for functional and supplement food production. In this review, the feasibility of dielectric heating (microwave irradiation) in the extraction of betalain and phenolic compounds mostly from fruit and vegetable wastes was discussed.

Accelerated Solvent Extraction as a Green Tool for the Recovery of Polyphenols and Pigments from Wild Nettle Leaves

This study aimed to investigate the performance of accelerated solvent extraction (ASE) as a green approach for the recovery of polyphenols and pigments from wild nettle leaves (NL). ASE was operated at different temperatures (20, 50, 80 and 110 °C), static times (5 and 10 min) and cycle numbers (1–4) using ethanol (96%) as an extraction solvent. In order to compare the efficiency of ASE, ultrasound assisted extraction (UAE) at 80 °C for 30 min was performed as a referent. Polyphenol and pigment analyses were carried out by HPLC and antioxidant capacity was assessed by ORAC. Seven polyphenols from subclasses of hydroxycinnamic acids and flavonoids, along with chlorophylls a and b and their derivatives and six carotenoids and their derivatives were identified and quantified. Chlorogenic acid was the most abundant polyphenol and chlorophyll a represented the dominant pigment. ASE conditions at 110 °C/10 min/3 or 4 cycles proved to be the optimal for achieving the highest yields of analyzed compounds. In comparison with UAE, ASE showed better performance in terms of yields and antioxidants recovery, hence delivering extract with 60% higher antioxidant capacity. Finally, the potential of NL as a functional ingredient from natural sources can be successfully accessed by ASE.

Comparison between Pressurized Liquid Extraction and Conventional Soxhlet Extraction for Rosemary Antioxidants, Yield, Composition, and Environmental Footprint

Nowadays, "green analytical chemistry" challenges are to develop techniques which reduce the environmental impact not only in term of analysis but also in the sample preparation step. Within this objective, pressurized liquid extraction (PLE) was investigated to determine the initial composition of key antioxidants contained in rosemary leaves: Rosmarinic acid (RA), carnosic acid (CA), and carnosol (CO). An experimental design was applied to identify an optimized PLE set of extraction parameters: A temperature of 183 °C, a pressure of 130 bar, and an extraction duration of 3 min enabled recovering rosemary antioxidants. PLE was further compared to conventional Soxhlet extraction (CSE) in term of global processing time, energy used, solvent recovery, raw material used, accuracy, reproducibility, and robustness to extract quantitatively RA, CA, and CO from rosemary leaves. A statistical comparison of the two extraction procedure (PLE and CSE) was achieved and showed no significant difference between the two procedures in terms of RA, CA, and CO extraction. To complete the study showing that the use of PLE is an advantageous alternative to CSE, the eco-footprint of the PLE process was evaluated. Results demonstrate that it is a rapid, clean, and environmentally friendly extraction technique.

Impact of ultrasound-assisted extraction and solvent composition on bioactive compounds and in vitro biological activities of thyme and rosemary

Mediterranean herbs, specially thyme and rosemary, are important ingredients in food preparation and more recently have been studied as natural sources of bioactive compounds. This study aimed to study the effect of matrix (thyme vs. rosemary), and extraction protocol (conventional extraction vs. ultrasound assisted extraction) solvent composition (water vs. 50:50 ethanol:water solution) on the extraction of high value compounds (phenolic compounds, flavonoids and carotenoids) and also explore the antioxidant, antimicrobial (Listeria innocua, Staphylococcus aureus, and Salmonella enterica), probiotic (Lactobacillus casei and Bifidobacterium lactis), and anti-inflammatory activities. The phenolic, flavonoid and carotenoid content of extracts was greatly influenced by extraction conditions wherein the ultrasound pre-treatment improved the extraction of carotenoids but induced the opposite effect for polyphenols and flavonoids in both herbs. Only the aqueous extract of thyme obtained from ultrasound pre-treatment was the only extract that inhibited the growth of potentially pathogenic bacteria, stimulated the probiotic bacteria and achieved high anti-inflammatory and antioxidant activity. Moreover, this extract also was rich on phenolic compounds (such as p-coumaric acid 4-O-glucoside, kaempferol 3-O-rutinoside, feruloyl glucose, and 4-vinylguaiacol) and carotenoids. Therefore, ultrasound extraction of bioactive compounds with water as solvent could be explored in food and pharmaceutical applications.

Antioxidant Capacity and Antigenotoxic Effect of Hibiscus sabdariffa L. Extracts Obtained with Ultrasound-Assisted Extraction Process

Hibiscus sabdariffa (Roselle) is in high demand worldwide due to its beneficial health properties owing to the polyphenols content, mainly in the flower calyx. The objective of this study was to find the best conditions (time and liquid: solid ratio) to extract polyphenols from Roselle using Ultrasound-Assisted Extraction (UAE) (40 kHz, 180 W), with ethanol how solvent; as well as determine the yield of phenols, anthocyanin, flavonoids, tannins, antioxidant activity (DPPH) and antigenotoxic effect (comet assay). A traditional solid-liquid extraction was applied as a reference. Extraction times of 40 and 60 min resulted in the highest polyphenols (13.019 mg GAE/g dry weight (dw)), flavonoids (4.981 CE/g dw), anthocyanins (1.855 mg Cya3GE/g dw), and tannins (0.745 CE/g dw) recoveries and an antioxidant activity (DPPH) of 74.58%. Extracts from white calyces contained similar amounts of phenols and flavonoids, but very little condensed tannins (0.049 CE/g dw) and practically no anthocyanins. Extracts from red and white calyces, showed antigenotoxic activity and repaired capacity of damage caused by mutagens in human lymphocytes.