Electrospun Fe2O3-Al2O3 nanocomposite fibers as efficient adsorbent for removal of heavy metal ions from aqueous solution

Template-free efficacious morphology of electrosynthesized polyaniline/β-cyclodextrin host-guest complex on Au/rGO modified electrode for removal and recovery of rare-earth and heavy elements from seawater

Global water pollution and scarcity of water resources are turning increasingly into serious threats to the survival of all living organisms on Earth. This study offers an influent strategy for the electrosynthesis of reduced graphene oxide/polyaniline/β-cyclodextrin (rGO/PAni/βCD) nanocomposite and its application to the removal/recovery of heavy elements (HEs) and rare-earth elements (REEs). Besides physicochemical and electrochemical studies, the surface morphological and statistical properties of fabricated nanocomposite electrode were examined. The textural and morphological characteristics of nanocomposite electrode were investigated via AFM data based on statistical, stereometric, and fractal theory. The cohesive, porous, and well-developed morphology of fabricated nanocomposite electrode has enabled the electrodeposition technique to achieve significant simultaneous removal/recovery efficiency of HE and REE ions such as Pb(II), Cu(II), Cd(II), Hg(II), Ce(IV), and Nb(V). Therefore, using rGO/PAni/βCD, considerable removal of HEs and REEs was achieved under optimized pH, 0.1 M KNO3, and 35 mg L-1 metal ion initial concentration during 20 min. Removal capacity of the nanocomposite electrode is preserved subsequent to 10 cycles of electrodeposition/desorption, according to the desorption investigation through eluted adsorbent at time intervals in deionized water and adjusted acidic pH values. Then, using rGO/PAni/CD nanocomposite, simulated seawater remediation was accomplished successfully. This interdisciplinary approach reveals that the removal/recovery efficiency enhance linearly along with the improvement of well-developed morphology for electrosynthesized composites. Thus, these results suggest how the morphological features of the polymer composites could improve remediation of water resources.

Emerging iron-based mesoporous materials for adsorptive removal of pollutants: Mechanism, optimization, challenges, and future perspective

Iron-based materials (IBMs) have shown promise as adsorbents due to their unique physicochemical properties. This review provides an overview of the different types of IBMs, their synthesis methods, and their properties. Results found in the adsorption of emerging contaminants to a wide range of IBMs are discussed. The IBMs used were evaluated in terms of their maximum uptake capacity, with special consideration given to environmental conditions such as contact time, solution pH, initial pollutant concentration, etc. The adsorption mechanisms of pollutants are discussed taking into account the results of kinetic, isotherm, thermodynamic studies, surface complexation modelling (SCM), and available spectroscopic data. A current overview of molecular modeling and simulation studies related to density functional theory (DFT), surface response methodology (RSM), and artificial neural network (ANN) is presented. In addition, the reusability and suitability of IBMs in real wastewater treatment is shown. The review concludes with the strengths and weaknesses of current research and suggests ideas for future research that will improve our ability to remove contaminants from real wastewater streams.

Nd Recovery from Wastewater with Magnetic Calcium Alginate ((1,4)-β-d-Mannuronic Acid and α-L-Guluronic Acid) Hydrogels

In this study, a magnetic adsorbent material was produced, by environmentally friendly and inexpensive precursor materials, to clean wastewater that may result from primary and secondary rare earth metal (REM) production. Then, the absorption of Nd³⁺ ions from wastewater was done and this process's kinetic and isotherm models were developed. Thus, the removal of Nd³⁺ from wastewater with magnetic materials was accomplished, and then, this precious metal was recovered by using different acid media. First, Fe sub-micron particles were successfully produced by the polyol method. To increase the stability of Fe-based particles, their surfaces were covered with an oxide layer, and the average thickness was determined as 16 nm. The synthesized Fe particles were added into the calcium alginate beads and then coated with chitosan to increase the pH stability of the gels. The chemical composition of the gels was determined by Fourier transform infrared spectroscopy, the thermal properties were determined by differential scanning calorimetry, and the magnetic properties were determined by vibrating-sample magnetometer analysis. The magnetic saturation of the hydrogels was 0.297 emu/g. After the production of magnetic calcium alginate hydrogels, Nd³⁺ ion removal from wastewater was done. Wastewater was cleaned with 94.22% efficiency. The kinetic models of the adsorption study were derived, and isotherm studies were done. Adsorption reaction fitted different kinetic models at different time intervals and the Freundlich isotherm model. The effect of pH, temperature, and solid-liquid ratio on the system was determined and the thermodynamic constants of the system were calculated. After the adsorption studies, Nd³⁺ ions were regenerated in different acid environments and achieved an 87.48% efficiency value. The removal of Nd³⁺ ions from wastewater was carried out with high efficiency, the gels obtained as a result of adsorption were regenerated with high efficiency by using acid media, and it was predicted that the gels could be reused. This study is thought to have reference results not only for the removal of REM from wastewater by magnetic adsorption materials but also for the adsorption of heavy metals from wastewater.

A novel and capable supported phenylazophenylenediamine-based nano-adsorbent for removal of the Pb, Cd, and Ni ions from aqueous solutions

Herein, we report the synthesis and characterization of chrysoidine (4-phenylazo-m-phenylenediamine) grafted on magnetic nanoparticles (Fe₃O₄@SiO₂@CPTMS@PhAzPhDA = FeSiPAPDA) as a novel and versatile adsorbent used for the satisfactory removal of Pb, Ni, and Cd ions from contaminated water via the formation of their complexes. The Freundlich, Langmuir, Temkin, and Redlich-Patterson isotherm models were studied to reveal the adsorption capability of the adsorbent and were found out that the Langmuir model is more compatible with the nano-adsorbent behavior. Moreover, according to the ICP tests as well as based on the Langmuir isotherm, the maximum adsorption capacity of the FeSiPAPDA-based adsorbent for the Pb ions (97.58) is more than that of Cd (78.59) and Ni ions (64.03).

Co-pyrolysis of sewage sludge as additive with phytoremediation residue on the fate of heavy metals and the carbon sequestration potential of derived biochar

Considering the characteristics of municipal sewage sludge (MS) and Sedum alfreddi L. (SA, a hyperaccumulator plant), we attempted to use MS to enhance the enrichment and stability of heavy metals (HMs) in pyrolysis residue during SA pyrolysis. The effects of pyrolysis temperature (400-800 °C) and co-pyrolysis on migration behavior, chemical speciation, long-term leaching toxicity of HMs, and the environmental risk and carbon sequestration potential of biochar were systematically investigated. Besides, thermodynamic equilibrium simulations were performed to study the transformation of HM compounds during pyrolysis. When the pyrolysis temperature increased from 400 °C to 800 °C, the unstable fractions (F1+F2) of Cd, Pb, Cu, and Cr in MS1SA3 800 had decreased to less than 6% and Zn to 20.4%, and long-term leachability of HMs decreased continuously. Meanwhile, biochar's ecological risk was reduced to a low level, while its carbon sequestration potential improved with little released HMs. Compared with SA pyrolysis alone, adding MS increased the relative residue content of Cd and Zn in biochar, whereas no apparent effect on Pb, Cu, and Cr, and the proportion of stable fractions (F3+F4) increased. Co-pyrolysis enhanced the carbon sequestration potential of biochar, attributed to the inherent minerals of MS. Equilibrium calculations showed that the influence of MS on the fate of HMs during SA pyrolysis is mainly attributed to its high sulfur content, while Si and Al preferentially combine with alkali metal (K)/alkaline earth metal (Ca) and then interact with Zn. The findings in this paper suggest that co-pyrolysis of MS as an additive with hyperaccumulator plants is a feasible proposal, and the co-pyrolysis biochar obtained at suitable temperatures has the potential for safe application.

Recent advances and remaining barriers to the development of electrospun nanofiber and nanofiber composites for point-of-use and point-of-entry water treatment systems

In this review, we focus on electrospun nanofibers as a promising material alternative for the niche application of decentralized, point-of-use (POU) and point-of-entry (POE) water treatment systems. We focus our review on prior work with various formulations of electrospun materials, including nanofibers of carbon, pure metal oxides, functionalized polymers, and polymer-metal oxide composites, that exhibit analogous performance to media (e.g., activated carbon, ion exchange resins) commonly used in commercially available, certified POU/POE devices for contaminants including organic pollutants, metals (e.g., lead) and persistent oxyanions (e.g., nitrate). We then analyze the relevant strengths and remaining research and development opportunities of the relevant literature based on an evaluation framework that considers (i) performance comparison to commercial analogs; (ii) appropriate pollutant targets for POU/POE applications; (iii) testing in flow-through systems consistent with POU/POE applications; (iv) consideration of water quality effects; and (v) evaluation of material strength and longevity. We also identify several emerging issues in decentralized water treatment where nanofiber-based POU/POE devices could help meet existing needs including their use for treatment of uranium, disinfection, and in electrochemical treatment systems. To date, research has demonstrated promising material performance toward relevant targets for POU/POE applications, using appropriate aquatic matrices and considering material stability. To fully realize their promise as an emerging treatment technology, our analysis of the available literature reveals the need for more work that benchmarks nanofiber performance against established commercial analogs, as well as fabrication and performance validation at scales and under conditions simulating POU/POE water treatment.

Polyacrylonitrile/Aminated Polymeric Nanosphere Nanofibers as Efficient Adsorbents for Cr(VI) Removal

In this work, polyacrylonitrile/aminated polymeric nanosphere (PAN/APN) nanofibers were prepared by electrospinning of monodispersed aminated polymeric nanospheres (APNs) for removal of Cr(VI) from aqueous solution. Characterization results showed that obtained PAN/APNs possessed nitrogen functionalization. Furthermore, the adsorption application results indicated that PAN/APN nanofibers exhibited a high adsorption capacity of 556 mg/g at 298 K for Cr(VI) removal. The kinetic data showed that the adsorption process fits the pseudo-second order. A thermodynamic study revealed that the adsorption of Cr(VI) was spontaneous and endothermic. The coexisting ions Na⁺, Ca²⁺, K⁺, Cl⁻, NO₃⁻ and PO₄³⁻ had little influence on Cr(VI) adsorption, while SO₄²⁻ in solution dramatically decreased the removal performance. In the investigation of the removal mechanism, relative results indicated that the adsorption behavior possibly involved electrostatic adsorption, redox reaction and chelation. PAN/APN nanofibers can detoxify Cr(VI) to Cr(III) and subsequently chelate Cr(III) on its surface. The unique structure and nitrogen functionalization of PAN/APN nanofibers make them novel and prospective candidates in heavy metal removal.

Fe/Co-MOF Nanocatalysts: Greener Chemistry Approach for the Removal of Toxic Metals and Catalytic Applications

This study describes the preparation of new bimetallic (Fe/Co)-organic framework (Bi-MOF) nanocatalysts with different percentages of iron/cobalt for their use and reuse in adsorption, antibacterial, antioxidant, and catalytic applications following the principles of green chemistry. The prepared catalysts were characterized using several techniques, including X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy. These techniques proved the formation of MOFs, and the average crystallite sizes were 25.3-53.1, 27.6-67.2, 3.0-18.9, 3.0-12.9, and 3.0-23.6 nm for the Fe-MOF, Co-MOF, 10%Fe:90%Co-MOF, 50%Fe:50%Co-MOF, and 90%Fe:10%Co-MOF samples, respectively. The nanoscale (Fe/Co) Bi-MOF catalysts as efficient heterogeneous solid catalysts showed high catalytic activity with excellent yields and short reaction times in the catalytic reactions of quinoxaline and dibenzoxanthene compounds, in addition to their antioxidant and antibacterial activities. Furthermore, the nanoscale (Fe/Co) Bi-MOF catalysts efficiently removed toxic metal pollutants (Pb²⁺, Hg²⁺, Cd²⁺, and Cu²⁺) from aqueous solutions with high adsorption capacity.

Selective adsorption and separation of Cr(VI) by surface-imprinted microsphere based on thiosemicarbazide-functionalized sodium alginate

Cr(VI)-imprinting thiosemicarbazide-functionalized sodium alginate (IIPTSC@SA) microspheres were fabricated to achieve the good selective adsorption for Cr(VI) removal from aqueous solution containing multiple ions. The selective adsorption and reusability of IIPTSC@SA microsphere were intensively investigated. The results showed that the grafting conditions of thiosemicarbazide were optimized at 0.2 g of TSC at 60 °C for 5 h and the ion-imprinting conditions at 100 mL of 2 wt % glutaraldehyde at 60 °C for 6 h. IIPTSC@SA microspheres exhibited the maximum adsorption capacity of 252.5 mg/g and good selectivity to remove Cr(VI) from multi-ion coexisting water. The adsorption process complied with a monolayer adsorption by virtue of chemical interactions together with endothermic spontaneously. After eight adsorption-desorption, the adsorption capacity and selectivity of IIPTSC@SA microspheres remained relatively stable.

Heavy Metal Adsorption Using Magnetic Nanoparticles for Water Purification: A Critical Review

Research on contamination of groundwater and drinking water is of major importance. Due to the rapid and significant progress in the last decade in nanotechnology and its potential applications to water purification, such as adsorption of heavy metal ion from contaminated water, a wide number of articles have been published. An evaluating frame of the main findings of recent research on heavy metal removal using magnetic nanoparticles, with emphasis on water quality and method applicability, is presented. A large number of articles have been studied with a focus on the synthesis and characterization procedures for bare and modified magnetic nanoparticles as well as on their adsorption capacity and the corresponding desorption process of the methods are presented. The present review analysis shows that the experimental procedures demonstrate high adsorption capacity for pollutants from aquatic solutions. Moreover, reuse of the employed nanoparticles up to five times leads to an efficiency up to 90%. We must mention also that in some rare occasions, nanoparticles have been reused up to 22 times.

Fabrication of Eco-Friendly Polyelectrolyte Membranes Based on Sulfonate Grafted Sodium Alginate for Drug Delivery, Toxic Metal Ion Removal and Fuel Cell Applications

Polyelectrolyte membranes (PEMs) are a novel type of material that is in high demand in health, energy and environmental sectors. If environmentally benign materials are created with biodegradable ones, PEMs can evolve into practical technology. In this work, we have fabricated environmentally safe and economic PEMs based on sulfonate grafted sodium alginate (SA) and poly(vinyl alcohol) (PVA). In the first step, 2-acrylamido-2-methyl-1-propanesulphonic acid (AMPS) and sodium 4-vinylbenzene sulfonate (SVBS) are grafted on to SA by utilizing the simple free radical polymerization technique. Graft copolymers (SA-g-AMPS and SA-g-SVBS) were characterized by ¹H NMR, FTIR, XRD and DSC. In the second step, sulfonated SA was successfully blended with PVA to fabricate PEMs for the in vitro controlled release of 5-fluorouracil (anti-cancer drug) at pH 1.2 and 7.4 and to remove copper (II) ions from aqueous media. Moreover, phosphomolybdic acids (PMAs) incorporated with composite PEMs were developed to evaluate fuel cell characteristics, i.e., ion exchange capacity, oxidative stability, proton conductivity and methanol permeability. Fabricated PEMs are characterized by the FTIR, ATR-FTIR, XRD, SEM and EDAX. PMA was incorporated. PEMs demonstrated maximum encapsulation efficiency of 5FU, i.e., 78 ± 2.3%, and released the drug maximum in pH 7.4 buffer. The maximum Cu(II) removal was observed at 188.91 and 181.22 mg.g^–1. PMA incorporated with PEMs exhibited significant proton conductivity (59.23 and 45.66 mS/cm) and low methanol permeability (2.19 and 2.04 × 10⁻⁶ cm²/s).

Phosphate Adsorption from Aqueous Solution Using Electrospun Cellulose Acetate Nanofiber Membrane Modified with Graphene Oxide/Sodium Dodecyl Sulphate

Eutrophication and water pollution caused by a high concentration of phosphate are two concerning issues that affect water quality worldwide. A novel cellulose-based adsorbent, cellulose acetate/graphene oxide/sodium dodecyl sulphate (CA/GO/SDS), was developed for water treatment. A 13% CA solution in a mixture of acetone:dimethylacetamide (2:1) has been electrospun and complexed with a GO/SDS solution. The field emission scanning electron microscope (FESEM) showed that the CA membrane was pure white, while the CA/GO/SDS membrane was not as white as CA and its colour became darker as the GO content increased. The process of phosphate removal from the solutions was found to be aided by the hydroxyl groups on the surface of the CA modified with GO/SDS, as shown by infrared spectroscopy. An optimization condition for the adsorption process was studied by varying pH, immersion time, and the mass of the membrane. The experimental results from phosphate adsorption showed that CA/GO/SDS had an excellent pH adaptability, with an optimum pH of 7, and maximum removal (>87.0%) was observed with a membrane mass of 0.05 g at an initial concentration of 25 mg L^-1. A kinetic study revealed that 180 min of contact time could adsorb about 87.2% of phosphate onto the CA/GO/SDS membrane. A typical pseudo-second-order kinetic model successfully portrayed the kinetic sorption of phosphate, and the adsorption equilibrium data were well-correlated with the Langmuir adsorption model, suggesting the monolayer coverage of adsorbed molecules.

Review on Electrospun Nanofiber-Applied Products

Electrospinning technology, which was previously known as a scientific interdisciplinary research approach, is now ready to move towards a practice-based interdisciplinary approach in a variety of fields, progressively. Electrospun nanofiber-applied products are made directly from a nonwoven fabric-based membranes prepared from polymeric liquids involving the application of sufficiently high voltages during electrospinning. Today, electrospun nanofiber-based materials are of remarkable interest across multiple fields of applications, such as in electronics, sensors, functional garments, sound proofing, filters, wound dressing and scaffolds. This article presents such a review for summarizing the current progress on the manufacturing scalability of electrospun nanofibers and the commercialization of electrospun nanofiber products by dedicated companies globally. Despite the clear potential and limitless possibilities for electrospun nanofiber applications, the uptake of electrospinning by the industry is still limited due to the challenges in the manufacturing and turning of electrospun nanofibers into physical products. The recent developments in the field of electrospinning, such as the prominent nonwoven technology, personal views and the potential path forward for the growth of commercially applied products based on electrospun nanofibers, are also highlighted.

Three-dimensional fast elemental mapping by soft X-ray dual-energy focal stacks imaging

The three-dimensional (3D) dual-energy focal stacks (FS) imaging method has been developed to quickly obtain the spatial distribution of an element of interest in a sample; it is a combination of the 3D FS imaging method and two-dimensional (2D) dual-energy contrast imaging based on scanning transmission soft X-ray microscopy (STXM). A simulation was firstly performed to verify the feasibility of the 3D elemental reconstruction method. Then, a sample of composite nanofibers, polystyrene doped with ferric acetylacetonate [Fe(acac)3], was further investigated to quickly reveal the spatial distribution of Fe(acac)3 in the sample. Furthermore, the data acquisition time was less than that for STXM nanotomography under similar resolution conditions and did not require any complicated sample preparation. The novel approach of 3D dual-energy FS imaging, which allows fast 3D elemental mapping, is expected to provide invaluable information for biomedicine and materials science.

Design and characterization of PANI/starch/Fe2O3 bio composite for wastewater remediation

A new synthesized polyaniline/starch/hematite bio composite (PANI/S/Fe₂O₃ BC) has been studied as an effective material for on-site water remediation. PANI/S/Fe₂O₃ BC was developed by combining the techniques of co-precipitation and interfacial polymerization in the presence of aqueous starch solution in an acidic medium under ultrasonic irradiation. The nano-morphologies and structures of the designed PANI/S/Fe₂O₃ BC were evaluated by various techniques relative to PANI and Fe₂O₃ nanoparticles. In single and multiple systems, PANI/S/Fe₂O₃ BC was evaluated as a possible adsorbent for different heavy metals, including As³⁺, Zn²⁺, and Co²⁺, relative to PANI and Fe₂O₃ nanoparticles. In terms of pH value, operating temperature, initial heavy metal concentration, contact time, adsorbent dose and competitive ions in the solutions, the adsorption process was optimized. For 92% overall adsorption of Co²⁺ and 100% overall adsorption of both As³⁺ and Zn²⁺, the adsorption equilibrium was achieved within 60 and 120 min, respectively. In addition, adsorption thermodynamic analysis shows that the As³⁺ ions adsorption process was not random and the pseudo-second-order fitted with experimental results. Moreover, PANI/S/Fe₂O₃ BC was evaluated as an antibacterial agent against Gram-negative bacteria (Salmonella typhimurium) and Gram-positive bacteria (S. aureus, Methicillin-Resistant Staphylococcus, Aureus Clinical isolate and Bacillus subtilis). The reported performances indicated that the PANI/S/Fe₂O₃ BC is a potent candidate for industrial water bioremediation.

A critical review on the electrospun nanofibrous membranes for the adsorption of heavy metals in water treatment

Electrospun nanofibrous membranes (ENFMs) have many superior advantages, such as large specific surface area, high porosity, easy modification, good flexibility, and easy separation for recycling, which are consider as excellent adsorbents. In this paper, the research progress in the adsorption of heavy metals in water treatment by ENFMs is reviewed. Three types of ENFMs, including organic polymer ENFMs, organic polymer/inorganic material composite ENFMs and inorganic ENFMs are summarized, and their adsorption capacities for heavy metals in water are compared. The adsorption selectivity and capacity of ENFMs for heavy metals are depended largely on the type and number of functional groups on the surface of membranes, and usually the more the functional groups, the higher the adsorption capacity. The adsorption mechanisms of ENFMs are also mainly determined by the type of functional groups on the membrane. At present, the main challenge is to achieve the mass production of high-quality nanofibers and their actual application in the treatment of heavy metal-containing wastewater. Therefore, more consideration should be focused on the improvement of stability, mechanical strength and reusability of ENFMs. This review may provide an insight for the development of ENFMs-based adsorbents for heavy metals separation and water purification in the future.

A stiff ZnO/carbon foam composite with second-level macroporous structure filled ZnO particles for heavy metal ions removal

A stiff zinc oxide/carbon foam (ZnO/CF) composite as a desirable adsorbent for heavy metal ions was innovatively designed and fabricated by loading ZnO particles into a carbon foam with capsule-like second-level macropores. The features of the resulting composite were characterized by FESEM, XRD, BET, FTIR, and XPS. The effects of adsorption parameters on the Pb(II), Cr(III), and Cu(II) ions removal were studied through batch experiments. Results show that the ZnO/CF composite possesses a second-level macroporous structure filled ZnO particles, which has both mesoporous structure and Zn-O-C bond with the strongly synergistic effect. And meanwhile, it has a relatively high compression strength of 2.18 MPa at a density of 0.18 g cm^-3. The experimental maximum adsorption capacities for Pb(II), Cr(III), and Cu(II) ions reach 170.85 mg g^-1, 168.74 mg g^-1, and 104.61 mg g^-1 with relatively high partition coefficients of 5.803 mg g^-1 μM^-1, 1.169 mg g^-1 μM^-1, and 0.648 mg g^-1 μM^-1, respectively. The experimental data are in accordance with Langmuir isotherm and pseudo-second-order kinetic model. Moreover, the composite still exhibits a good adsorption performance even after five cycles.

Mitigation of environmentally-related hazardous pollutants from water matrices using nanostructured materials - A review

An unprecedented rise in population growth and rapid worldwide industrial development are associated with the increasing discharge of a range of toxic and baleful compounds. These toxic pollutants including dyes, endocrine-disrupters, heavy metals, personal care products, and pharmaceuticals are destructing nature's balance and intensifying environmental toxicity at a disquieting rate. Therefore, finding better, novel and more environmentally sound approaches for wastewater remediation are of great importance. Nanoscale materials have opened up some new horizons in various fields of science and technology. Among a range of treatment technologies, nanostructured materials have recently received incredible interest as an emerging platform for wastewater remediation owing to their exceptional surface-area-to-volume ratio, unique electrical and chemical properties, quantum size effects, high scalability, and tunable surface functionalities. An array of nanomaterials including noble metal-based nanostructures, transition metal oxide nanomaterials, carbon-based nanomaterials, carbon nanotubes, and graphene/graphene oxide nanomaterials to their novel nanocomposites and nanoconjugates have been attempted as the promising catalysts to overcome environmental dilemmas. In this review, we summarized recent advances in nanostructured materials that are particularly engineered for the remediation of environmental contaminants. The toxicity of various classes of relevant tailored nanomaterials towards human health and the ecosystem along with perspectives is also presented. In our opinion, an overview of the up-to-date advancements on this emerging topic may provide new ideas and thoughts for engineering low-cost and highly-efficient nanostructured materials for the abatement of recalcitrant pollutants for a sustainable environment.

Preparation of Reduced Graphene Oxide Aerogel and Its Adsorption for Pb(II)

In this study, reduced graphene oxide (rGO) aerogels were successfully prepared using a facile hydrothermal method and determined with Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area, and scanning electron microscopy. The rGO aerogels were used to remove Pb(II) from aqueous solution, and the adsorption performance of rGO aerogels was investigated. In addition, the adsorption-desorption cycle experiments were carried out to evaluate the recyclability and stability of rGO aerogels. The adsorption data were consistent with the pseudo-second-order kinetic model and Langmuir isotherm model. The experimental results showed that rGO aerogels have good adsorption capacity for Pb(II) and can be utilized for wastewater treatment.

Cu (II) removal using electrospun dual-responsive polyethersulfone-poly (dimethyl amino) ethyl methacrylate (PES-PDMAEMA) blend nanofibers

A novel electrospun dual-responsive polyethersulfone-poly(dimethyl amino) ethyl methacrylate nanofibrous adsorbent was fabricated via electrospinning for the removal of Cu (II) from aqueous solution. Morphological, chemical, and dual-responsiveness of the composite nanofibrous adsorbent were characterized using scanning electron microscope equipped with energy dispersive x-ray, Fourier transform infrared, and UV-VIS spectrophotometer, respectively. The obtained uniform and bead-free nanofibers were then used for the removal of Cu (II) from aqueous solution. Results showed that the temperature-responsiveness of the nanofibers is dependent on the pH of the solution, as indicated by the decreasing lower critical solution temperature with increasing pH level. Temperature and pH offer a synergistic effect on the adsorption of Cu (II), with maximum adsorption observed at pH 6.5 at 55 °C. Kinetic, thermodynamic, and isotherm studies indicate that the adsorption of copper ions follows chemisorption and is thermodynamically favored at increasing temperature. From the Langmuir isotherm model, the obtained maximum adsorption capacity, q_m, was 161.30 mg g^-1 at 55 °C. From the desorption studies, results showed that the maximum desorption was observed at pH 3 at 25 °C. In conclusion, PES-PDMAEMA has the capability to adsorb and desorb Cu (II) by adjusting both pH and temperature, hence it can be considered as an efficient and economical adsorbent for heavy metals such Cu (II).

Co-precipitative Preparation of a Sulfonated Cellulose-magnetite Hybrid Sorbent for the Removal of Cu2+ Ions

A novel sulfonated cellulose-magnetite (Fe3O4) composite sorbent was prepared and applied for the removal of Cu2+ ions from an aqueous solution. It was characterized by infrared spectroscopy, X-ray fluorescence, elemental analysis, SEM, VSM and X-ray photoelectron spectroscopy. The effect of the sorbent dose, initial solution pH, and temperature on Cu2+ removal were studied. The removal of the Cu2+ was completed in 15 min, and the sorption kinetics of Cu2+ was found to follow a pseudo-second-order kinetic model. An equilibrium test demonstrated that sorption of Cu2+ onto a hybrid sorbent agreed well with the Langmuir adsorption model for a maximum adsorption capacity of 4.2 mg/g. Moreover, the optimum pH for Cu2+ removal was found to be ≥4. Furthermore, the thermodynamic parameters reveal the feasibility, spontaneity and endothermic nature of the sorption process. In addition, Cu2+ ions can be desorbed from the sorbent with a 0.5 M H2SO4 solution.

Influence of Selective Conditions on Various Composite Sorbents for Enhanced Removal of Copper (II) Ions from Aqueous Environments

Numerous pollutants, including dyes, heavy metals, pesticides, and microorganisms, are found in wastewater and have great consequences when discharged onto natural freshwater sources. Heavy metals are predominantly reported in wastewater. Heavy metals are persistent, non-biodegradable and toxic, transforming from a less toxic form to more toxic forms in environmental media under favourable conditions. Among heavy metals, copper is dominantly found in wastewater effluent. In this review, the effects of high concentration of copper in plants and living tissues of both aquatic animals and humans are identified. The performance of different polymer adsorbents and the established optimum conditions to assess the resultant remediation effect as well as the amount of copper removed are presented. This procedure allows the establishment of a valid conclusion of reduced time and improved Cu (II) ion removal in association with recent nano-polymer adsorbents. Nano-polymer composites are therefore seen as good candidates for remediation of Cu ions while pH range 5-6 and room temperature were mostly reported for optimum performance. The optimum conditions reported can be applied for other metal remediation and development of potent novel adsorbents and process conditions.

Application of modified electrospun nanofiber membranes with α-Fe2O3 nanoparticles in arsenate removal from aqueous media

In the present study, electrospun nanofiber membranes (ENMs) of polyacrylonitrile (PAN) were modified by dispersing α-Fe₂O₃ nanoparticles, synthesized using a thermal solvent process, in a PAN solution. The morphology and physiochemical properties of the prepared ENMs and the α-Fe₂O₃ were characterized using FESEM, EDX, BET, XRD, FTIR, porosity, and contact angle measurement. XPS was used to investigate the interaction of ENM with arsenate (As(V)) during the adsorption. Moreover, the effect of pH, the equilibrium isotherm, and the kinetics were investigated in batch experiments. The Langmuir isotherm best correlated the experimental results, indicating monolayer adsorption on ENMs, and the kinetics was best fitted, R² > 0.99, by the pseudo-second-order model. In addition, the effects of certain conditions on the filtration performance were examined, such as feed concentration and transmembrane pressure (TMP). By passing sodium hydroxide (0.1 M) for 20 min, the membrane was regenerated. The increase in TMP, along with the presence of co-ions including chloride, nitrate, and sulfate, had negative impacts on the removal of As(V). The results show that the modified ENMs with α-Fe₂O₃ nanoparticles are applicable for As(V) ion removal and possibly for eliminating other heavy metals from aqueous media.

Adsorption mechanism of Pb2+ ions by Fe3O4, SnO2, and TiO2 nanoparticles

Nanosized sorbents for the removal of heavy metal ions are preferred due to high surface area, smaller size, and enhanced reactivity during adsorbate/adsorbent interactions. In the present study, Fe₃O₄, SnO₂, and TiO₂ nanoparticles were prepared by microemulsion-assisted precipitation method. The particles were characterized by BET surface area, X-rays diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, transmittance electron microscopy (TEM), and X-ray photoelectron (XPS) spectroscopy. The respective particle sizes calculated from TEM were 7 nm (± 2), 10 nm (± 2), and 20 nm (± 3) for Fe₃O₄, SnO₂, and TiO₂. The adsorbents were employed for the adsorption of Pb²⁺ ions from the aqueous solutions. The respective maximum adsorption capacity for Fe₃O₄, SnO₂, and TiO₂ nanoparticles was 53.33, 47.21, and 65.65 mg/g at 313 K. Based on the exchange reaction taking place on the surfaces of Fe₃O₄, SnO₂, and TiO₂, it is concluded that Pb²⁺ ions are adsorbed in hydrated form. The X-ray photoelectron spectroscopy (XPS) studies also support the exchange mechanism and confirmed the presence of elements like Fe, Sn, Ti, Pb, and O and their oxidation states. Both Langmuir and Freundlich models in non-linear form were applied, however, based on R_L values, the Langmuir model fits well to the sorption data. Moreover, adsorption parameters were also determined by using non-linear form of the Langmuir model along with statistical approaches to remove error. The q_m and K_b values confirm better adsorption capacity and binding strength for Pb²⁺ ions as compared to the values reported in the literature.

Acrylic acid-grafted pre-plasma nanofibers for efficient removal of oil pollution from aquatic environment

Oily wastewater is a worldwide problem threatening the environment and humans. High flux and low-energy consumption separation of oil and water is urgently required but still faces great challenges. In this study, nanofibrous membranes with superhydrophilic and underwater superoleophobic surfaces were fabricated by grafting acrylic acid onto plasma-treated electrospun polystyrene/polyacrylonitrile (PS/PAN) membranes. The morphologies, chemical compositions, mechanical and surface properties of the membranes were examined in detail. The water contact angles of the PS/PAN membranes were 137.4°, 130.1°, 119.5°, 88.1° and 80.2°, respectively, which decreased to 76.5°, 47.9°, 34.4°, 0° and 0° after grafting treatment, proving that the modification improved the surface hydrophilicity of the membranes due to the introduction of hydrophilic groups. In addition, a gravity-driven filtration device was utilized to investigate the oil/water separation potential of the membranes. The results indicated that the grafted PS/PAN membranes separated the layered oil/water mixtures with permeate flux up to 57509 L m^-2 h^-1, while high fluxes of 1390-6460 L m^-2 h^-1 for the separation of different oil-in-water emulsions. Importantly, the membranes still maintained high flux and efficiency even after several cycles of separation. Therefore, the reusable membranes can be expected to be potential cost-effective materials for oil/water treatment.

Nanomaterials: Solutions to Water-Concomitant Challenges

Plenty of fresh water resources are still inaccessible for human use. Calamities such as pollution, climate change, and global warming pose serious threats to the fresh water system. Although many naturally and synthetically grown materials have been taken up to resolve these issues, there is still plenty of room for enhancements in technology and material perspectives to maximize resources and to minimize harm. Considering the challenges related to the purification of water, materials in the form of nanofiber membranes and nanomaterials have made tremendous contributions to water purification and filtration. Nanofiber membranes made of synthetic polymer nanofibers, ceramic membranes etc., metal oxides in various morphologies, and carbonaceous materials were explored in relation to waste removal from water. In this review, we have discussed a few key materials that have shown effectiveness in removing pollutants from waste water, enabling solutions to existing problems in obtaining clean drinking water.

Cadmium removal from simulated groundwater using alumina nanoparticles: behaviors and mechanisms

Cadmium (Cd), one of the most toxic contaminants in groundwater, can cause a severe threat to human health and ecological systems. In this study, alumina nanoparticles were synthesized and tested for high-efficiency Cd removal from simulated groundwater. Furthermore, the synthesized alumina nanoparticles were successfully modified using negatively charged glycerol, to alleviate the challenge of its low mobility in groundwater for the Cd removal. The maximum removal efficiency of both synthesized and glycerol-modified alumina nanoparticles were more than 99%. The sorption isotherm and kinetic data of both synthesized and glycerol-modified alumina nanoparticles were best fitted to the Freundlich model and the pseudo-second-order model, respectively, indicating that the sorption of Cd ions occurs on heterogeneous surfaces of both alumina nanoparticles via the chemisorption mechanism. X-ray photoelectron spectroscopy and energy dispersive X-ray analysis revealed the presence of Cd peak in both sorbents after contact with Cd. In addition, the FTIR analyses demonstrated that hydroxyl group participated in the sorption of Cd on both synthesized and glycerol-modified alumina nanoparticles, while other glycerol associated groups contributed to the removal of Cd ions by the glycerol-modified alumina nanoparticles. It was concluded that Cd removal by synthesized and glycerol-modified alumina nanoparticles were mainly due to ion exchange and electrostatic attraction, respectively. Desorption experiment suggested that both alumina nanoparticles are effective and practically significant sorbents to remediate Cd from contaminated groundwater. However, the stronger bond between Cd and glycerol-modified alumina, plus its potential of higher mobility due to the negative charge on the surface, warrant glycerol-modified alumina nanoparticles a better performance in remediating Cd contaminated groundwater than that of the synthesized alumina nanoparticles.

Performance of synthesized cast and electrospun PVA/chitosan/ZnO-NH2 nano-adsorbents in single and simultaneous adsorption of cadmium and nickel ions from wastewater

The performance of synthesized cast and electrospun polyvinyl alcohol/chitosan/zinc oxide/aminopropyltriethoxylsilane (PVA/chitosan/ZnO-APTES) nano-adsorbents were compared in removal of Cd(II) and Ni(II) ions from wastewater. The adsorbents were characterized by SEM, BET, FTIR and TGA analyses. Furthermore, the swelling investigations were carried out to study the adsorbent stability in aqueous solution. The effect of several parameters such as contents of ZnO-NH₂, contact time, initial Cd(II) and Ni(II) concentration and temperature on the adsorption capacity was investigated in a batch mode. In comparison with cast adsorbent, nanofiber adsorbent indicated the better adsorption performance. The experimental data well fitted the double-exponential kinetic model. In single metal ion system, the maximum adsorption capacity of nanofiber for Cd(II) and Ni(II) ions is estimated to be 1.239 and 0.851 mmol/g, respectively, much higher than q_m of cast adsorbent for Cd(II) (0.625 mmol/g) and Ni(II) (0.474 mmol/g) ions. Thermodynamic parameters were investigated to identify the nature of adsorption process. In binary system of Cd(II)-Ni(II) ions, the inhibitory effect of competitive Cd(II) ion on the Ni(II) adsorption was greater than the inhibitory effect of competitive on the Cd(II) adsorption. The selectivity adsorption of both nanofiber and cast adsorbents was in order of Cd(II) > Ni(II).

Removal of Cu2+ and Ni2+ from Aqueous Solution using SnO2 Nanomaterial effect of: pH, Time, Temperature, interfering cations

Tin oxide, SnO₂, nanomaterial was synthesized and tested for the removal of Cu²⁺ and Ni²⁺ ions from aqueous solutions. Various parameters for the binding were investigated in batch studied, which included pH, time, temperature, and interferences. In addition, isotherm studied were performed to determine the maximum binding capacity for both Cu²⁺ and Ni²⁺ ions. The optimal binding pH determined from the effects of pH were to be at pH 5 for both the Cu²⁺ and Ni²⁺ ions. The isotherm studies were performed at temperatures of 4°C, 25 °C, and 45 °C for both the Cu²⁺ and Ni²⁺ ions and were found to follow the Langmuir isotherm model. The binding capacities for the Cu²⁺ ions were 2.63 mg/g, 2.95 mg/g and 3.27 mg/g at the aforementioned temperatures, respectively. Whereas the binding capacities for Ni²⁺ were 0.79 mg/g, 1.07 mg/g, and 1.46 mg/g at the respective temperatures. The determined thermodynamic parameters for the binding showed that the binding processes for the reactions were endothermic, as the ΔG was observed to decrease with decreasing temperatures. As well the ΔH was 28.73 kJ/mol for Cu²⁺ (III) and 13.37 kJ/mol for Ni²⁺. The ΔS was observed to be 92.65 J/mol for Cu²⁺ and 54.53 J/mol for Ni²⁺. The free energy of adsorption for the Cu²⁺ was determined to be 13.99 kJ/mol and the activation energy for the binding of Ni²⁺ was determined to be 8.09 KJ/mol. The activation energy data indicate that the reaction was occurring through chemisorption.

The removal of mercury ion pollution by using Fe3O4-nanocellulose: Synthesis, characterizations and DFT studies

In this study, we have attempted to extract cellulose from Cystoseria myricaas algae. Nanocellulose, Fe₃O₄ and Fe3O4-nanocellulose compounds are synthesized by acid hydrolysis and co-precipitation as well as sol-gel methods The synthesized compounds are characterized by x-ray diffraction, transmission electron microscopy, particle size distribution (PSD), scanning electron microscopy (SEM),energy dispersive x-ray spectroscopy, vibrating sample magnetometer and Fourier transform infrared spectroscopy. The Hg (II) uptake on Fe3O4-nanocellulose is investigated by 14 isotherm models, 12 kinetic models, adsorption activation energy as well as thermodynamic of adsorption. The polymers of algae and the interactions between Hg (II) and cellulose are investigated by density functional theory (DFT) in various conditions. The results of both simulations show a good agreement with experimental data.