Photothermal graphene/UiO-66-NH2 fabrics for ultrafast catalytic degradation of chemical warfare agent simulants

Recent advances in cotton fabric-based photocatalytic composites for the degradation of organic contaminants

Cotton is one of the oldest and most widely used natural fibers in the world. It enables a wide range of applications due to its excellent moisture absorption, thermal insulation, heat resistance, and durability. Benefiting from current developments in textile technology and materials science, people are constantly seeking more comfortable, more beautiful and more versatile cotton fabrics. As the second skin of body, clothing not only provides the basic needs of wear but also increases the protection of body against different environmental stimuli. In this article, a comprehensive review is proposed regarding research activities of systematically summarise the development and research of cotton fabric-based photocatalytic composites for the degradation of organic contaminants in the area of self-cleaning, degradation of gaseous contaminants, pathogenic bacteria or viruses, and chemical warfare agents. Specifically, we begin with a brief exposition of the background and significance of cotton fabric-based photocatalytic composites. Next, a systematical review on cotton fabric-based photocatalytic composites is provided according to their mechanisms and advanced applications. Finally, a simple summary and analysis concludes the current limitations and future directions in these composites for the degradation of organic contaminants.

Facile Recycling Strategy of Dyed Polyester Waste by Template-Based Synthesis of UiO-66 for Value-Added Transformation into Self-detoxifying Fabrics

Polyethylene terephthalate (PET) accounts for a significant portion of textile waste, and recycling strategies for this material have attracted much attention. This study proposes a facile and innovative PET recycling method applicable to environmental remediation that involves the conversion of dyed PET fabric waste into a value-added fabric. Herein, a template-based synthesis approach capable of growing a UiO-66 metal-organic framework (MOF) directly on a dyed PET fabric is reported. The advantage of this process lies in its simplicity, where the partial hydrolysis of PET followed by a zirconium chloride treatment results in the successful growth of UiO-66 on a dyed PET fabric with the concurrent removal of the dye without additional steps. The catalytic performance of the UiO-66-grown fabric was evaluated through the degradation of dimethyl 4-nitrophenyl phosphate (DMNP), a nerve agent simulant. The fabric produced by the simple metal treatment (Zr@PEThyd) exhibited excellent DMNP degradation performance with t1/2 = 43.3 min and maintained functional stability after a harsh washing procedure, an outcome attributed to the surface-assisted UiO-66 growth that ensured good bonding stability. The developed process is innovative in that it uses dyed PET waste as a template for the direct growth of UiO-66, simplifying the process without compromising the catalytic functionality. This research provides an informative option for a sustainable textile recycling strategy by transforming dyed PET waste into an advanced self-detoxifying material.

Robust PVA/GO@MOF membrane with fast photothermal self-cleaning property for oily wastewater purification

The poor mechanical durability and weak fouling resistance of oil/water separation membranes severely restrict their applications in industry. Herein, a robust PVA/GO@MOF membrane with fast photothermal self-cleaning capability was developed through facile chemical crosslinking and suction-filtration strategies. Attributed to the powerful underwater superoleophobicity, the PVA/GO@MOF membrane exhibited extraordinary anti-oil adhesion even for high-viscosity crude oil and continuous crude oil emulsion purification capability with stable flux (1020 L m-2 h-1 bar-1) and exceptional efficiency (> 99.3%) even after 60 min. Most importantly, in comparison to reported photocatalytic self-cleaning oil/water separation membranes, the PVA/GO@MOF membrane can degrade organic contaminants more rapidly with a higher degradation rate (99.9%) in 50 min due to the superior photothermal conversion capacity. The synergistic photothermal and photocatalytic effects significantly enhanced photodegradation efficiency, which created opportunities for in-depth treatment of complex oily wastewater. Besides, the obtained membrane displayed excellent chemical and mechanical durability with underwater oil contact angle (UWOCA) above 150° even in harsh environments, such as corrosive solutions, UV irradiation, ultrasound treatment, abrasion experiment and bending test. Therefore, the developed PVA/GO@MOF membrane with robust durability and fast photocatalytic self-cleaning property is highly expected to purify oily wastewater and degrade organic pollutants.

Construction of imidazole@defective hierarchical porous UiO-66 and fibrous composites for rapid and nonbuffered catalytic hydrolysis of organophosphorus nerve agents

Hydrolytic destruction of toxic organophosphorus nerve agents by metal-organic framework (MOF) catalysts is commonly reliant on bulk water and volatile liquid base, preventing real-world implementation. Poor accessibility to MOF-based active sites in heterogeneous catalysis is also a crucial factor since reactants diffusion is limited by inherently small micropores. To overcome these practical limitations, a ligand-selective pyrolysis strategy was used to construct unsaturated Zr defects and additional mesopores in UiO-66(Zr). Owing to synergistic effect of Zr defects and hierarchical pores, hydrolysis rate constant (k) of nerve agent simulant DMNP (dimethyl 4-nitrophenyl phosphate) on optimal DHP-UiO-30% (defective hierarchical porous UiO-66) is 3.2 times higher than counterpart UiO-30% in N-ethylmorpholine buffer. Encapsulating imidazole (Im) into DHP-UiO-30% affords Im@DHP-UiO, mimicking phosphotriesterase. Im-72@DHP-UiO exhibits rapid DMNP detoxification with 99% conversion in 12 min and initial half-life (t1/2) of 1.8 min in nonbuffered water. As the first example of 'three-in-one' detoxifier, Im@DHP-UiO is further integrated onto nonwoven fabric to construct Im@DHP/Fiber, achieving solid-phase detoxification at ambient humidity with t1/2 of 19.6 min and final conversion of 91%. This is comparable to many powdered catalysts in aqueous solution buffered by volatile bases. This unified strategy is critical and viable to efficiently hydrolyze nerve agents in practical settings.

Efficient Degradation of Sulfamethoxazole by Diatomite-Supported Hydroxyl-Modified UIO-66 Photocatalyst after Calcination

Sulfamethoxazole (SMX) is a widely used antibiotic to treat bacterial infections prevalent among humans and animals. SMX undergoes several transformation pathways in living organisms and external environments. Therefore, the development of efficient remediation methods for treating SMX and its metabolites is needed. We fabricated a photo-Fenton catalyst using an UIO-66 (Zr) metal-organic framework (MOF) dispersed in diatomite by a single-step solvothermal method for hydroxylation (HO-UIO-66). The HO-UIO-66-0/DE-assisted Fenton-like process degraded SMX with 94.7% efficiency; however, HO-UIO-66 (Zr) is not stable. We improved the stability of the catalyst by introducing a calcination step. The calcination temperature is critical to improving the catalytic efficiency of the composite (for example, designated as HO-UIO-66/DE-300 to denote hydroxylated UIO-66 dispersed in diatomite calcined at 300 °C). The degradation of SMX by HO-UIO-66/DE-300 was 93.8% in 120 min with 4 mmol/L H2O2 at pH 3 under visible light radiation. The O1s XPS signatures signify the stability of the catalyst after repeated use for SMX degradation. The electron spin resonance spectral data suggest the role of h+, •OH, •O2-, and 1O2 in SMX degradation routes. The HO-UIO-66/DE-300-assisted Fenton-like process shows potential in degrading pharmaceutical products present in water and wastewater.

Fiber Integrated Metal-Organic Frameworks as Functional Components in Smart Textiles

Owing to high modularity and synthetic tunability, metal-organic frameworks (MOFs) on textiles are poised to contribute to the development of state-of-the-art wearable systems with multifunctional performance. While these composite materials have demonstrated promising functions in sensing, filtration, detoxification, and biomedicine, their applicability in multifunctional systems is only beginning to materialize. This review highlights the multifunctionality and versatility of MOF-integrated textile systems. It summarizes the operational goals of MOF@textile composites, encompassing sensing, filtration, detoxification, drug delivery, UV protection, and photocatalysis. Building upon these recent advances, this review concludes with an outlook on emerging opportunities for the diverse applications of MOF@textile systems in the realm of smart wearables.

Recent advances in the nanoarchitectonics of metal-organic frameworks for light-activated tumor therapy

Metal-organic frameworks (MOFs) have received extensive attention in tumor therapy because of their advantages, including large specific surface area, regular pore size, adjustable shape, and facile functionalization. MOFs are porous materials formed by the coordination bonding of metal clusters and organic ligands. This review summarized the most recent advancements in tumor treatment based on nMOFs. First, we discuss the classification of MOFs, which primarily include the series of isoreticular MOF (IRMOF), zeolitic imidazolate framework (ZIF), coordination pillared-layer (CPL), Materials of Institute Lavoisier (MIL), porous coordination network (PCN), University of Oslo (UiO) and Biological metal-organic frameworks (BioMOFs). Then, we discuss the use of nMOFs in antitumor therapy, including drug delivery strategies, photodynamic therapy (PDT), photothermal therapy (PTT), and combination therapy. Finally, the obstacles and opportunities in nMOFs are discussed.

Zirconium-based metal-organic framework loaded agarose hydrogels for fluorescence turn-on detection of nerve agent simulant vapor

Developing reliable sensors that accurately detect deadly chemical gases is critical to global security. Nerve agents are one of the most dangerous chemicals in the world and are often found in gaseous forms in the environment, which remain a challenge to detect because of their low levels. In this paper, a fluorescent probe based on a Zr-based metal-organic framework UiO-66-NH2 was proposed. The specific binding between the Zr-O site of UiO-66-NH2 and diethyl chlorophosphate (DCP) blocked the ligand-to-metal charge transfer (LMCT) process in UiO-66-NH2, thereby enabling the fluorescence turn-on detection of DCP. More importantly, a simple and portable hydrogel soft-solid platform (UiO-66-NH2@Aga) was constructed by incorporating UiO-66-NH2 into the formation process of agarose (Aga) hydrogel for fast and sensitive detection of gaseous DCP. When the hydrogel was exposed to a low concentration of DCP vapor, its fluorescence changed from colorless to bright blue, allowing visualization of the DCP gas for analysis. The UiO-66-NH2@Aga integrated solid-state platform showed an excellent response to DCP vapor in the detection range of 1.98 to 9.90 ppm and with a detection limit of 1.16 ppm. This work opened up a unique way to design a convenient, low cost and practical gas physical examination platform.

Reactivity of [(PNP)Mn(CO)2] with Organophosphates

Organophosphorus nerve agents (OPAs) are a toxic class of synthetic compounds that cause adverse effects with many biological systems. Development of methods for environmental remediation and passivation has been ongoing for years. However, little progress has been made in therapeutic development for exposure victims. Given the postexposure behavior of OPA materials in enzymes such as acetylcholinesterase (AChE), development of electrophilic compounds as therapeutics may be more beneficial than the currently employed nucleophilic countermeasures. In this report, we present our studies with an electrophilic, 16-electron manganese complex (iPrPNP)Mn(CO)2 (1) and the nucleophilic hydroxide derivative (iPrPNHP)Mn(CO)2(OH) (2). The reactivity of 1 with phosphorus acids and the reactivity of 2 with the P-F bond of diisopropylfluorophosphate (DIPF) were studied. The role of water in both nucleophilic and electrophilic reactivity was investigated with the use of 17O-labeled water. Promising results arising from reactions of both 1 and 2 with organophosphorus substrates are reported.

The enhanced photocatalytic and photothermal effects of Ti3C2 Mxene quantum dot/macroscopic porous graphitic carbon nitride heterojunction for Hydrogen Production

A new heterostructure between Ti₃C₂ MXene quantum dot and 3D macroscopic porous graphitic carbon nitride (PGCN) was successfully obtained by integrating Ti₃C₂ quantum dots onto porous graphitized carbon nitride (Ti₃C₂QDs/PGCN) using in situ electrostatic self-assembly techniques. The photocatalytic H₂ evolution rate of optimized 5.5 wt% Ti₃C₂ QD/PGCN composites is nearly 15.24 and 3.53 times higher than pristine CN, and PGCN, respectively. Ti₃C₂ quantum dots can significantly enhance the hydrogen production activity of PGCN. In addition, their good photothermal conversion ability accelerates the overall reaction process and enhances the light absorption and carrier density. Furthermore, to elucidate the photocatalytic mechanism, a series of tests involving electron spin resonance (ESR) and density functional theory (DFT) calculations were performed. The results confirmed that the Schottky barrier between PGCN and Ti₃C₂ QD can effectively promote spatial charge separation and significantly improve the photocatalytic performance. This work provides a new approach for the construction of photocatalytic systems and the application of MXene QD.

Aramid nanofibers supported metal-organic framework aerogel for protection of chemical warfare agent

Protective fabrics containing Zr-Based Metal-Organic Frameworks (Zr-MOFs) show great potential in the detoxification of chemical warfare agents (CWAs). However, the current studies still face the challenges of complicated fabrication processes, limited MOF loading mass, and insufficient protection. Herein, we developed a lightweight, flexible and mechanical robust aerogel by in situ growth of UiO-66-NH₂ onto aramid nanofibers (ANFs) and assembly of UiO-66-NH₂ loaded ANFs (UiO-66-NH₂@ANFs) into 3D hierarchically porous architecture. The UiO-66-NH₂@ANF aerogels feature high MOF loading of 261 %, high surface area of 589.349 m² g^-1, open and interconnected cellular structure, which provide efficient transfer channels and promote catalytic degradation of CWAs. As a result, the UiO-66-NH₂@ANF aerogels demonstrate high 2-chloroethyl ethyl thioether (CEES) removal rate at 98.9 % and a short half-life of 8.15 min. Moreover, the aerogels present good mechanical stability (recovery rate of 93.3 % after 100 cycles under 30 % strain), low thermal conductivity (λ of 25.66 mW m^-1 K^-1), high flame resistance (LOI of 32 %) and good wearing comfortableness, indicating promising potential in multifunctional protection against CWAs.

Functionalized reactive polymers for the removal of chemical warfare agents: A review

Protection from and removal of chemical warfare agents (CWAs) from the environment remains a global goal. Activated charcoal, metal oxides, metal organic frameworks (MOFs), polyoxometalates (POMs) and reactive polymers have all been investigated for CWA removal. Composite polymeric materials are rapidly gaining traction as versatile building blocks for personal protective equipment (PPE) and catalytic devices. Polymers are inexpensive to produce and easily engineered into a wide range of materials including films, electro-spun fibers, mixed-matrix membranes/reactors, and other forms. When containing reactive side-chains, hydrolysis catalysts, and/or oxidative catalysts polymeric devices are primed for CWA decontamination. In this review, recent advances in reactive polymeric materials for CWA removal are summarized. To aid in comparing the effectiveness of the different solid catalysts, particular attention is paid to the stoichiometric ratio of reactive species to toxic substrate (CWA or CWA simulant).

Low-temperature propane oxidative dehydrogenation over UiO-66 supported vanadia catalysts: Role of support confinement effects

Overoxidation is the principal barrier against commercializing propane oxidative dehydrogenation (PODH) catalysts for propylene production. The current approach to reducing overoxidation, i.e., coating the non-selective support surface with a monolayer of active phase, can itself increase the probability of overoxidation of the produced propylene due to polymerization of active phase species. Incorporating the "confinement agents" onto the metal oxide support might be considered as an alternative solution to prevent hydrocarbons from reaching the support and overoxidizing. Herein, the UiO-66 metal-organic framework, which contains numerous organic ligands connected to the zirconia nodes, was used as support for the vanadia active phase to highlight the role of support's confinement effects on the overall catalytic performance toward the PODH. The UiO-66 supported vanadia catalysts with various vanadium loadings were fabricated via an ultrasonic-assisted wet impregnation procedure. The catalytic function is related to the underlying chemical processes at catalyst surfaces using physicochemical characterization techniques, PODH performance measurements, and machine learning tools. The results showed that the catalyst with a relatively low vanadia density of 2.7 nm-2, equivalent to less than half of the entire support surface coverage, could achieve propylene productivity of 4.43 [Formula: see text] , propane conversion of 17.1%, and propylene selectivity of 49.7% at 350 °C.

Superelastic and Photothermal RGO/Zr-Doped TiO2 Nanofibrous Aerogels Enable the Rapid Decomposition of Chemical Warfare Agents

To date, the reckless use of deadly chemical warfare agents (CWAs) has posed serious risks to humanity, property, and ecological environment. Therefore, necessary materials able to rapidly adsorb and securely decompose these hazardous toxics are in urgent demand. Herein, three-dimensional (3D) reduced graphene oxide/Zr-doped TiO₂ nanofibrous aerogels (RGO/ZT NAs) are synthesized by feasibly combining sol-gel electrospinning technology and a unidirectional freeze-drying approach. Benefiting from the synergetic coassembly of flexible ZT nanofibers and pliable RGO nanosheets, the hierarchically entangled fibrous frameworks feature ultralow density, superior elasticity, and robust fatigue resistance over 10⁶ compressive cycles. In particular, the RGO incorporation is attributed to the achieved increased surface area, stronger light absorption, and decreased recombination of charge-carriers for photocatalysis. The highly porous 3D RGO/ZT NAs deliver enhanced photothermal catalytic activity for CWA degradation as well as excellent recyclability and good photostability. This work opens fresh horizons for developing advanced 3D aerogel-based photocatalysts in a controlled fashion.

Recent advances in porous MOFs and their hybrids for photothermal cancer therapy

Cancer is still one of the most life-threatening diseases in the world. Among the various cancer therapeutic strategies, photothermal therapy (PTT) has attracted considerable attention due to its high treatment efficacy, low invasive burden, and minor side effects. Microporous metal-organic frameworks (MOFs) are potential materials for photothermal tumor treatment thanks to their high surface areas, suitable pore geometry, and easy functionalization. Through designating organic linkers, encapsulating PTT agents and fabricating MOF hybrids, MOF-based treatment platforms have great potential in PTT. In this review, we mainly summarize the recent advances of MOFs in photothermal combined cancer therapy. The present challenges and possible future prospects in this field are also explored.

Ultrafast Degradation and High Adsorption Capability of a Sulfur Mustard Simulant under Ambient Conditions Using Granular UiO-66-NH2 Metal-Organic Gels

Zirconium-based metal-organic frameworks (Zr-MOFs) have been considered as prospective materials for the degradation of nerve chemical warfare agents (CWAs) but show poor catalytic performance toward blister agents. Moreover, the powder issues and the poor adsorption capability also remain as the major challenges for the application of Zr-MOFs in practical CWA detoxification. Herein, a series of defected granular UiO-66-NH2 metal-organic gels are synthesized via adjusting the amount of added concentrated hydrochloric acid for the decontamination of 2-chloroethyl ethyl sulfide (2-CEES), a sulfur mustard simulant. The half-life of 2-CEES decontaminated by defected granular UiO-66-NH2 metal-organic gels can be shortened to 7.6 min, which is the highest reported value for MOFs under ambient conditions. The mechanism of decontamination is that the amino group on the linkers in UiO-66-NH2 MOGs undergoes a substitution reaction with 2-CEES to yield 2-(2-(ethylthio)ethylamino)terephthalic acid, which is less toxic and fixed in the frameworks. The recycling test corroborates that the granular UiO-66-NH2 xerogels possess good stability and reusability. Static adsorption and desorption tests show that UiO-66-NH2 xerogels possess a high 2-CEES vapor adsorption capacity of 802 mg/g after exposure for 1 d and only 28 wt % desorption capacity after air exposure for 7 d. The dual function of ultrafast degradation and high adsorption capability provide a firm foundation for using UiO-66-NH2 xerogels as a future protection media.

Microwave-Assisted Synthesis of Porous Composites MOF-Textile for the Protection against Chemical and Nuclear Hazards

Since the emergence of chemical, biological, radiological, and nuclear risks, significant efforts have been made to create efficient personal protection equipment. Recently, metal-organic framework (MOF) materials have emerged as new promising candidates for the capture and degradation of various threats, like chemical warfare agents (CWAs) or radioactive species. Herein, we report a new synthesis method of MOF-textile composites by microwave irradiation, with direct anchoring of MOFs on textiles. The resistance of the composite has been tested using normed abrasion measurements, and non-stable samples were optimized. The protection capacity of the MOF-textile composite has been tested against dimethyl 4-nitrophenyl phosphate, a common CWA simulant, showing short degradation half-life (30 min). Radiological/nuclear protection has also been tested through uranium uptake (up to 15 mg g^-1 adsorbent) and the capture of Kr or Xe gas at 0.9 and 2.9 cm³/g, respectively.

Synthesis of a UiO-66/g-C3N4 composite using terephthalic acid obtained from waste plastic for the photocatalytic degradation of the chemical warfare agent simulant, methyl paraoxon

In our study, Zr-based UiO-66 (Zr) was synthesized using terephthalic acid obtained from waste plastic. Thereafter, UiO-66/g-C₃N₄ composites were prepared by the solvothermal method, and their photocatalytic activity in the photodegradation of the chemical warfare agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP), was evaluated. The as-synthesized UiO-66/g-C₃N₄ exhibited a high surface area (1440 m² g⁻¹) and a high capillary volume (1.49 cm³ g⁻¹). The UiO-66/g-C₃N₄ samples absorbed a visible light band with bandgap energies of 2.13–2.88 eV. The as-synthesized UiO-66/g-C₃N₄ composites exhibited highly efficient degradation of DMNP with a short half-life (t_1/2 of 2.17 min) at pH 7 under visible light irradiation. The trapping experiments confirmed that the h⁺ and ˙O₂⁻ radicals played an important role in the photocatalytic degradation of DMNP. The UiO-66/g-C₃N₄ catalyst simultaneously performed two processes: the hydrolysis and photocatalytic oxidation of DMNP in water. During irradiation, a p–n heterojunction between UiO-66 and g-C₃N₄ restricted the recombination of photogenerated electrons and holes, resulting in the enhancement in the degradation rate of DMNP.

UiO-66/g-C₃N₄ with a high surface area (1440 m² g⁻¹) and a high capillary volume (1.49 cm³ g⁻¹) exhibited highly efficient degradation of dimethyl 4-nitrophenyl phosphate with t_1/2 = 2.17 min.

Visible Light Response Photocatalytic Performance of Z-Scheme Ag3PO4/GO/UiO-66-NH2 Photocatalysts for the Levofloxacin Hydrochloride

A Ag₃PO₄/GO/UiO-66-NH₂(AGU) composite photocatalyst was prepared by an ultrasonic-assisted in situ precipitation method. The optical property, structure, composition, and morphology of photocatalysts were investigated using UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, electrochemical impedance spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive spectrometry, transmission electron microscopy, Fourier transform infrared spectroscopy, and charge flow tracking by photodeposition of Pt and PbO₂ nanoparticles. In comparison with Ag₃PO₄ and Ag₃PO₄/UiO-66-NH₂(AU), the AGU composite photocatalyst showed heightened photocatalytic performance for the degradation of levofloxacin hydrochloride (LVF). The AGU photocatalyst (dosage: 0.8 g/L) with 1% mass content of graphene oxide (GO), the mass ratio of Ag₃PO₄ and UiO-66-NH₂(U66N) reached 2:1, showed the highest photodegradation rate of 94.97% for 25 mg/L LVF after 60 min of visible light irradiation at pH = 6. The formation of a heterojunction and the addition of GO synergistically promote faster separation of electron-hole pairs, retain more active substances, and enhance the performance of the photocatalyst. Furthermore, the mechanism of the Z-scheme of the AGU composite photocatalytic is proposed.

Recent progress in decontamination system against chemical and biological materials: challenges and future perspectives

Environmental contamination is one of the key issues of developing countries in recent days, and several types of methods and technologies have been developed to overcome these issues. This paper highlights the importance of decontamination in a contaminated environment that normally precedes protection, detection and identification followed by medical support. Further, this paper especially focuses on individual and collective NBC decontamination required on navy ships and correspondingly presents solutions (viable and economical) through the use of indigenously developed decontamination equipment. The paper also highlights the integration of various decontamination technologies with pre-existing ship decontamination systems, indicating the need for various decontaminants. Finally, we will also focus on new decontamination systems based on nanomaterials and enzymes and their utilization.

Photo-assisted enhancement performance for rapid detoxification of chemical warfare agent simulants over versatile ZnIn2S4/UiO-66-NH2 nanocomposite catalysts

Constructing versatile materials with self-detoxification properties are highly desired for emergency destruction of chemical warfare agents (CWAs). Herein, we first reported in-situ fabrication of ZnIn₂S₄/UiO-66-NH₂ nanocomposites (ZnInS/UiO) and their application in catalytic detoxification of two CWA simulants. For nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP), the optimal ZnInS/UiO-23.9 displayed 5.9 times increase in hydrolysis rate having the turnover frequency (TOF) of 0.0586 s^-1 under simulated solar light (SSL), which is superior to the reported UiO-based catalysts. Photo-assisted enhancement in DMNP detoxification was due to photothermal effect of ZnInS and close interfacial contact in ZnInS/UiO heterostructures, facilitating instantaneous heat transfer from ZnInS to UiO catalytic sites. As for mustard gas surrogate 2-chloroethyl ethyl sulfide (CEES), under SSL irradiation for 15 min, ZnInS/UiO-23.9 can eliminate 96.7% of CEES in droplet experiment, being 4.17 and 3.24 times of ZnInS and UiO accordingly. It was ascribed to spatial separation of photoinduced electron-hole pairs and photothermally-assisted charge transfer in ZnInS/UiO composites, improving catalytic activity for CEES detoxification. Besides, the detected products suggested that CEES conversion underwent reductive dechlorination, radical reactions and hydrolysis. This study can be extended to other multifunctional catalysts based on metal-organic frameworks and provides new opportunities for photoassisted enhanced detoxification of CWAs.

UiO-66-NH2 Fabrics: Role of Trifluoroacetic Acid as a Modulator on MOF Uniform Coating on Electrospun Nanofibers and Efficient Decontamination of Chemical Warfare Agent Simulants

Protective fabrics with air-permeable and flexible features are crucial for practical application in the detoxification of chemical warfare agents (CWAs). Zr-based metal-organic frameworks (Zr-MOFs) are desirable to exhibit outstanding degradation toward CWAs. However, generally, MOFs with powders cannot afford the utilization as a protective layer directly; meanwhile, it is still a puzzling challenge to integrate MOFs with textiles efficiently. Herein, we develop a scalable and controllable strategy to fabricate UiO-66-NH₂ on electrospun polyacrylonitrile nanofibers (UiO-66-NH₂ fabrics) firmly and uniformly to capture and catalyze 2-chloroethyl ethyl sulfide (CEES) effectively for self-detoxification. The obtained UiO-66-NH₂ fabrics are greatly capable of specific surface area, ample porosity, excellent crystallinity, and abundant catalytic active sites. Consequently, CEES can be removed efficiently up to 97.7% after 48 h by reaction and adsorption. The degradation products mainly including ethyl-2-hydroxyethyl sulfide, ether, bis[2-(ethylthio)ethyl], and 2-(2-(ethylthio)ethylamino) terephthalic acid are detected. Moreover, the obtained nanofibrous fabrics possess air-permeable, washable, and flexible as well as lightweight merits, totally ensuring their promising engineering applications for protective clothing.

Direct Z-scheme CeO2@LDH core-shell heterostructure for photodegradation of Rhodamine B by synergistic persulfate activation

Photocatalytic activation of persulfate (PAPS) is considered an efficient and green approach for the mitigation of organic pollutants because of its advantages in low energy consumption and high reusability of photocatalysts. Herein, direct Z-scheme CeO₂@LDH heterojunction photocatalyst with a core-shell structure is constructed. We reveal that CeO₂@LDH exhibits excellent persulfate (PS) activation performance and high degradation efficiency of RhB under visible light irradiation. Control experiments by quenching catalytically active radicals and analysis of electron paramagnetic resonance (ESR) spectra suggest that the sulfate radical (SO₄·^-) generated by photocatalytic activation of PS, together with superoxide radical (·O₂^-) and hydroxyl radical (·OH), degrade pollutants synergistically. Density functional theory (DFT) calculations indicate that the built-in electric field across the surface of CeO₂ and LDH is the intrinsic driving force for the efficient transfer of hot carriers in the Z-scheme heterojunction. The construction of this transfer path can effectively engineer the interfacial band structure and inhibit the recombination of photogenerated electron-hole pairs and promote their transportation. Meanwhile, electrons were found to accumulate at the conduction band (CB) of LDHs and holes populate at valence band (VB) of CeO₂, generating more active species for photodegradation of RhB. We demonstrate that the Z-scheme heterojunction photocatalyst activated PS system (Z-scheme/PS) is a promising method to degrade RhB and potentially organic pollutants in general.

Chemical targets to deactivate biological and chemical toxins using surfaces and fabrics

The most recent global health and economic crisis caused by the SARS-CoV-2 outbreak has shown us that it is vital to be prepared for the next global threat, be it caused by pollutants, chemical toxins or biohazards. Therefore, we need to develop environments in which infectious diseases and dangerous chemicals cannot be spread or misused so easily. Especially, those who put themselves in situations of most exposure - doctors, nurses and those protecting and caring for the safety of others - should be adequately protected. In this Review, we explore how the development of coatings for surfaces and functionalized fabrics can help to accelerate the inactivation of biological and chemical toxins. We start by looking at recent advancements in the use of metal and metal-oxide-based catalysts for the inactivation of pathogenic threats, with a focus on identifying specific chemical bonds that can be targeted. We then discuss the use of metal-organic frameworks on textiles for the capture and degradation of various chemical warfare agents and their simulants, their long-term efficacy and the challenges they face.