Integration of samarium vanadate/carbon nanofiber through synergy: An electrochemical tool for sulfadiazine analysis

Rare earth orthovanadate (REM-VO4; REM = Pr, Gd, and Sm)-based sensors for selective and simultaneous detection of furazolidone and metronidazole

Antibiotics are vital tools in the fight against bacterial infections, with furazolidone (FD) and metronidazole (MD) being widely used to target pathogens like G. lamblia and H. pylori. However, overuse of these antibiotics can lead to serious health complications, highlighting the urgent need for accurate, real-time detection of these drugs at precise levels. In this study, we explore the use of differential pulse voltammetry (DPV) for detecting FD and MD with high sensitivity, employing a dual detection method. To enhance detection, we developed a sensor using rare earth metal-based orthovanadates (REM-VO4, where REM = Pr, Gd, and Sm) as electrode modifiers. These materials offer exceptional surface control, boosting the sensor's sensitivity and selectivity. Among the different configurations, the SmVO4-modified glassy carbon electrode (SmV/GCE) stands out, demonstrating the lowest charge transfer resistance (Rct = 56.82 Ω) and the largest electrochemical surface area (A = 0.11 cm2). SmVO4's unique nanostructure, with its high electrochemically active surface area and hollow structure, is key to its impressive performance. This sensor not only provides the lowest limits of detection (0.0009 μM for FD and 0.0036 μM for MD individually, and 0.0015 μM and 0.0049 μM for simultaneous detection) but also shows excellent anti-interference, repeatability, and reproducibility. Furthermore, SmV/GCE has been successfully applied for real-time analysis of biological and environmental samples, offering recoveries between 97.33 to 99.60%, demonstrating its practical potential for precise antibiotic monitoring.

Graphene-based electrochemical sensors for antibiotics: sensing theories, synthetic methods, and on-site monitoring applications

Owing to the extensive use of antibiotics for treating infectious diseases in livestock and humans, the resulting residual antibiotics are a burden to the ecosystem and human health. Hence, for human health and ecological safety, it is critical to determine the residual antibiotics with accuracy and convenience. Graphene-based electrochemical sensors are an effective tool to detect residual antibiotics owing to their advantages, such as, high sensitivity, simplicity, and time efficiency. In this work, we comprehensively summarize the recent advances in graphene-based electrochemical sensors used for detecting antibiotics, including modifiers for electrode fabrication, theoretical elaboration of electrochemical sensing mechanisms, and practical applications of portable electrochemical platforms for the on-site monitoring of antibiotics. It is anticipated that the current review will be a valuable reference for comprehensively comprehending graphene-based electrochemical sensors and further promoting their applications in the fields of healthcare, environmental protection, and food safety.

Investigating the Effect of Carbon Nanotubes Decorated SmVO4-MoS2 Nanocomposite for Energy Storage Enhancement via VARTM-Fabricated Solid-State Structural Supercapacitors Using Woven Carbon Fiber

Traditional supercapacitors are cumbersome and need separate enclosures, which add weight and reduce space efficiency. In contrast, structural supercapacitors combine energy storage with load-bearing materials, optimizing space and weight for automotive and aerospace applications. This study investigates the synthesis of SmVO4-MoS2 and SmVO4-MoS2-CNT nanocomposites, focusing on optimizing CNT concentration in SmVO4-MoS2-CNT for high-performance supercapacitors. The optimal concentration of SmVO4-MoS2-CNT is identified and used to fabricate structural supercapacitor devices via the vacuum-assisted resin transfer molding (VARTM) technique. The results indicate that the specific capacitance of Sm-Mo-C5, using a three-electrode system, reached 1.01 F cm-2 at a current density of 2.187 mA cm-2. The performance improvement is attributed to the synergistic interaction among SmVO4, MoS2, and CNTs, collectively enhancing conductivity and active site availability. The practical application of this study is demonstrated by synthesizing Sm-Mo-C5 on woven carbon fiber (WCF) and subsequently fabricating a structural supercapacitor device (SSD) using the VARTM. The SSD, produced via VARTM, exhibited a specific capacitance of 0.287 F cm- 2 at a current density of 2 A cm-2. The device showcased exceptional cyclic stability, maintaining 72.5% of its initial capacitance after 50,000 charge-discharge cycles. Additionally, it achieved a maximum energy density of 79.86 Wh kg-1 at a power density of 1017.69 W kg-1.

Construction of Cu2Y2O5/g-C3N4 Novel Composite for the Sensitive and Selective Trace-Level Electrochemical Detection of Sulfamethazine in Food and Water Samples

The most frequently used sulfonamide is sulfamethazine (SMZ) because it is often found in foods made from livestock, which is hazardous for individuals. Here, we have developed an easy, quick, selective, and sensitive analytical technique to efficiently detect SMZ. Recently, transition metal oxides have attracted many researchers for their excellent performance as a promising sensor for SMZ analysis because of their superior redox activity, electrocatalytic activity, electroactive sites, and electron transfer properties. Further, Cu-based oxides have a resilient electrical conductivity; however, to boost it to an extreme extent, a composite including two-dimensional (2D) graphitic carbon nitride (g-C3N4) nanosheets needs to be constructed and ready as a composite (denoted as g-C3N4/Cu2Y2O5). Moreover, several techniques, including X-ray diffraction analysis, scanning electron microscopy analysis, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy were employed to analyze the composites. The electrochemical measurements have revealed that the constructed g-C3N4/Cu2Y2O5 composites exhibit great electrochemical activity. Nevertheless, the sensor achieved outstanding repeatability and reproducibility alongside a low limit of detection (LOD) of 0.23 µM, a long linear range of 2 to 276 µM, and an electrode sensitivity of 8.86 µA µM-1 cm-2. Finally, the proposed GCE/g-C3N4/Cu2Y2O5 electrode proved highly effective for detection of SMZ in food samples, with acceptable recoveries. The GCE/g-C3N4/Cu2Y2O5 electrode has been successfully applied to SMZ detection in food and water samples.

Highly Specific Sulfadiazine Detection Using a Two-Dimensional Europium-Organic Coordination Polymer

Sulfadiazine (SFZ) is an inexpensive large-consumption antibiotic used for treat bacterial infections but an excess of residues in food can be harmful. Fast and specific luminescence detection of SFZ is highly challenging because of the interference of structurally similar antibiotics. In this work, we develop a two-dimensional europium-organic coordination polymer with excellent luminescence and water stability for highly specific detection of SFZ in the range of 0-0.2 mM. Structural analysis shows that the high stability of coordination polymer is due to the high coordination number of europium ion and the special chelating coordination structure of ligand. The experiment results revealed that the high selectivity and effectively luminescence quenched behaviour of coordination polymer toward SFZ is caused by highly efficient inner filter effect.

A Ce2MgMoO6 double perovskite decorated on a functionalized carbon nanofiber nanocomposite for quantification of ciprofloxacin in milk and honey samples: Density functional theory interpretation

In this study, a novel Ce2MgMoO6/CNFs (cerium magnesium molybdite double perovskite decorated on carbon nanofibers) nanocomposite was developed for selective and ultra-sensitive detection of ciprofloxacin (CFX). Physical characterization and analytical techniques were used to explore the morphology, structure, and electrocatalytic characteristics of the Ce2MgMoO6/CNFs nanocomposite. The sensor has a wide linear range (0.005-7.71 μM and 9.75-77.71 μM), a low limit of detection (0.012 μM), high sensitivity (0.807 μA μM-1 cm-2 nM), remarkable repeatability, and an appreciable storage stability. Here, we used density functional theory to investigate CFX and oxidized CFX as well as the locations of the energy levels and electron transfer sites. Furthermore, the Ce2MgMoO6/CNFs-modified electrode was successfully tested in food samples (milk and honey), indicating an acceptable response with a recovery percentage and relative standard deviation of less than 4%, which is comparable to that of GC-MS. Finally, the developed sensor exhibited high selectivity and stability for CFX detection.

Mechanism of biochar composite (BN3Z0.5BC) activated peracetic acid for efficient antibiotic degradation: Synergistic effect between free radicals and non-free radicals

This study utilized corn straw as the feedstock to synthesize biochar (BC) loaded with cobalt-zeolitic imidazolate framework nanoparticles and boron nitride quantum dots. The prepared BC composite, named BN3Z0.5BC, efficiently activated peracetic acid (PAA), resulting in the degradation of 94.8% of sulfadiazine (SDZ) in five minutes. Compared to pure BC, the SDZ removal rate increased nearly 5-fold. Mechanism analysis revealed that the main degradation pathway involves synergism between free and non-free radicals. The defect structure on the BC surface possesses a high charge density, stimulating PAA to produce more active species, while nitrogen-oxygen vacancy formation significantly promotes charge transfer. Besides, the unique structure of BC ensures good stability and recyclability, effectively controlling metal leaching. The BN3Z0.5BC/PAA system shows promising applicability across various water matrices, indicating a favorable application outlook.

Oxygen vacancy-rich Fe2(MoO4)3 combined with MWCNTs for electrochemical sensors of fentanyl and its analogs

Hundreds of thousands of people dying from the abuse of fentanyl and its analogs. Hence, the development of an efficient and highly accurate detection method is extremely relevant and challenging. Therefore, we proposed the introduction of oxygen defects into Fe2(MoO4)3 nanoparticles for improving the catalyst performance and combining it with multi-walled carbon nanotubes (MWCNTs) for electrochemical detection of fentanyl and its analogs. Oxygen vacancy-rich Fe2(MoO4)3 (called r-Fe2(MoO4)3) nanoparticles were successfully synthesized and characterized in detail by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectrometry (EDS), X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Raman spectra, BET, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) and investigated by comparison with oxygen vacancy-poor Fe2(MoO4)3 (called p-Fe2(MoO4)3). The obtained oxygen vacancy-rich Fe2(MoO4)3 was ultrasonically composited with MWCNTs for modification of glassy carbon electrodes (GCEs) used for the electrochemical detection of fentanyl and its analogs. The modified MWCNT-GCE showed ultrasensitivity to fentanyl, sufentanil, alfentanil, and acetylfentanyl with limits of detection (LOD) of 0.006 µmol·L-1, 0.008 µmol·L-1, 0.018 µmol·L-1, and 0.024 µmol·L-1, respectively, and could distinguish among the four drugs based on their peak voltages. Besides, the obtained r-Fe2(MoO4)3/MWCNT composite also exhibited high repeatability, selectivity, and stability. It showed satisfactory detection performance on real samples, with recoveries of 70.53 ~ 94.85% and 50.98 ~ 82.54% in serum and urine for the four drugs in a concentration range 0.2 ~ 1 µM, respectively. The experimental results confirm that the introduction of oxygen vacancies effectively improves the sensitivity of fentanyl electrochemical detection, and this work provides some inspiration for the development of catalytic materials for electrochemical sensors with higher sensitivity.

A novel differential ratiometric molecularly imprinted electrochemical sensor for determination of sulfadiazine in food samples

Herein, we report a novel differential ratiometric molecularly imprinted polymer (MIP) electrochemical sensor for sulfadiazine (SDZ). An MIP membrane with double templates, SDZ and propyl gallate (PG), was fabricated on glassy carbon electrode (GCE) modified by CuInS2/ZnS nanocomposites. After adding PG in the samples as the reference, the current differences between MIP@CuInS2/ZnS/GCE and non-imprinted polymer@CuInS2/ZnS/GCE at the potentials of 0.18 V (ΔIPG) and 0.92 V (ΔISDZ) were measured. The ratio of ΔISDZ/ΔIPG was used for SDZ determination in the differential and ratiometric dual-mode. The influence of the variations in electrode modification and sample enrichment conditions on the determination of SDZ can be suppressed by 2.8 ∼ 13.2-fold, enhancing the reproducibility and stability of the MIP sensor. The interference level was reduced by one order of magnitude compared with the normal MIP mode. The proposed sensors were used to determine SDZ in food samples, with the detection limit of 2.1 nM.

Highly dispersed redox antimony oxide pairs for accurate detection and electrochemistry-controlled recovery toward an antibiotic drug: Sulfadiazine

BACKGROUND

Sulfadiazine (SDZ) is a broad-spectrum antibiotic widely used in aquaculture and animal husbandry and it is easy to remain in the water system to damage the human body. Therefore, detection and removal of sulfadiazine in water systems become critical. Nowadays, catalysts and visible light are used to degrade sulfadiazine into smaller molecules containing N and S to reduce toxicity. However, these small molecules are easily released into water and the atmosphere to be the acid rain. Therefore, it is urgent to design a sensor with the ability to detect and remove SDZ at the same time. (96) RESULTS: We designed a novel composite catalyst sensor (Sb6O13@LTA GCE) with the ability to simultaneously monitor and remove sulfadiazine. The catalyst is generated by introducing SbCl5 into the reactive gel of LTA (Linde Type A) structure zeolite. In the hydrothermal reaction, the corrosive SbCl5 is transferred into nanosized Sb6O13 nanoparticle which is highly dispersed in the opening nano-scaled windows of the zeolite through redox and self-assembled progress. In the selected electrochemical overpotential range, the Sb6O13@LTA composited modified electrode could complete adsorption and desorption of SDZ through the electron transfer from Sb3+ to Sb5+. As the catalyst is in high stability, the only loss in the whole process of recovering SDZ is a small amount of electric energy. The extra-low detection limit and the removal efficiency of Sb6O13@LTA GCE have been achieved 4.0 pM and 19.3 mg/20 mg (136) SIGNIFICANCE: The prepared novel sensor has low detection limit, high removal efficiency and high selectivity for sulfadiazine. The Sb6O13@LTA GCE sensor, which is low-cost and has a simple preparation method, exhibits good reproducibility in both seawater and cell fluid. This provides the possibility for wide application in detecting and removing SDZ in water system. (53).

Flexible electrode-based voltammetric detection of Y (III) ions in real water samples using an efficient CyDTA complexing strategy

The rapid detection of rare earth elements is crucial in various fields, such as materials science, biomedicine, and water quality assessment. However, no studies have reported on the detection of yttrium (Y) using electrochemical sensor-based devices. In this study, we present an innovative method for detecting Y(III) ions in aquatic environments using an electroanalytical detection platform. We have developed a complexation catalytic method that integrates trans-1,2-cyclohexanediaminetetraacetic acid (CyDTA) and silver nanoparticles (Ag NPs), thereby enhancing the adsorption and electrochemical response of Y(III) ions. The modified electrode demonstrates an 18-fold increase in the response signal of the Y(III) reduction peak compared to the bare LIG electrode. To elucidate the electrocatalytic mechanism, we conducted various interface characterization methods and DFT simulations. The Ag-CyDTA/LIG electrode exhibits excellent detection performance, with a broad linear dynamic range of 1 × 10-6 to 0.01 g/L and an exceptionally low detection limit of 0.02 μg/L. Significantly, we successfully employed the electrochemical sensing platform to analyze real water samples from rare earth ore, marking the first report on the voltammetric detection of Y(III) ions in real water samples using a flexible electrode. These findings offer a promising technical solution for the practical detection of Y(III) ions.

Coral-like, self-assembled, and spatially bounded Ag nano-particles on franzinite zeolite composite sensor toward accurate, synergetic, and ultra-trace sulfadiazine detection

A coral-like Ag@FRA zeolite nanocomposite sensor reveals high sensitivity toward sulfadiazine (SDZ) in a dual detection of fluorescence and electrochemistry. The sensor has been as-synthesized in the hydrothermal condition through a one-pot self-assembly process in which the high crystalline Ag nanoparticles (NPs) are closely arranged and stacked on the nanosized surface cage window of the FRA (Franzinite) zeolite. Strong ultrasound can drive the coral-like composite release Ag nanoparticles whose distribution range mainly from 10 to 12 nm lead to the purple fluorescence in an emission spectrum. In sea water, the fluorescence increases linearly in the SDZ concentration range of 5 × 10-18-5 × 10-10 M. Furthermore, the LOD (limit of detection) reaches 1.4 × 10-22 M by the spatial confinement effect of the coral-liked FRA cage structure in CV (cyclic voltammetry) method at the characteristic potential peak position of 0.1 V vs. SCE. The theoretical calculation also confirms that the FRA cage structure matches well with the SDZ molecules. Further studies indicate the generation of a novel stable composite sensor with high specificity, good recovery and repeatability, which depends on the induction of silver ions upon the artificial synthesis of FRA.

Electrospun Carbon Nanofibers and Their Applications in Several Areas

Carbon nanofibers (CNFs) have a broad spectrum of applications, including sensor manufacturing, electrochemical catalysis, and energy storage. Among different manufacturing methods, electrospinning, due to its simplicity and efficiency, has emerged as one of the most powerful commercial large-scale production techniques. Numerous researchers have been attracted to improving the performance of CNFs and exploring new potential applications. This paper first discusses the working theory of manufacturing electrospun CNFs. Next, the current efforts in upgrading the properties of CNFs, such as pore architecture, anisotropy, electrochemistry, and hydrophilicity, are discussed. The corresponding applications due to the superior performances of CNFs are subsequently elaborated. Finally, the future development of CNFs is discussed.

An Electrochemical Sensor for Sulfadiazine Determination Based on a Copper Nanoparticles/Molecularly Imprinted Overoxidized Polypyrrole Composite

To protect consumers from risks related to overexposure to sulfadiazine, total residues of this antibacterial agent in animal-origin foodstuffs not exceed international regulations. To this end, a new electrochemical sensor based on a molecularly imprinted polymer nanocomposite using overoxidized polypyrrole and copper nanoparticles for the detection of sulfadiazine is elaborated. After optimization of the preparation of the electrochemical sensors, their differential pulse voltammetric signal exhibits an excellent stability and reproducibility at 1.05 V, with a large linear range between 10^-9 and 10^-5 mol L^-1 and a low detection limit of 3.1 × 10^-10 mol L^-1. The produced sulfadiazine sensor was successfully tested in real milk samples. The combination of the properties of the electrical conduction of copper nanoparticles with the properties of the preconcentration of the molecularly imprinted overoxidized polypyrrole allows for the highly sensitive detection of sulfadiazine, even in real milk samples. This strategy is new and leads to the lowest detection limit yet achieved, compared to those of the previously published sulfadiazine electrochemical sensors.

A Review on Electrospinning as Versatile Supports for Diverse Nanofibers and Their Applications in Environmental Sensing

Rapid industrialization is accompanied by the deterioration of the natural environment. The deepening crisis associated with the ecological environment has garnered widespread attention toward strengthening environmental monitoring and protection. Environmental sensors are one of the key technologies for environmental monitoring, ultimately enabling environmental protection. In recent decades, micro/nanomaterials have been widely studied and applied in environmental sensing owing to their unique dimensional properties. Electrospinning has been developed and adopted as a facile, quick, and effective technology to produce continuous micro- and nanofiber materials. The technology has advanced rapidly and become one of the hotspots in the field of nanomaterials research. Environmental sensors made from electrospun nanofibers possess many advantages, such as having a porous structure and high specific surface area, which effectively improve their performance in environmental sensing. Furthermore, by introducing functional nanomaterials (carbon nanotubes, metal oxides, conjugated polymers, etc.) into electrospun fibers, synergistic effects between different materials can be utilized to improve the catalytic activity and sensitivity of the sensors. In this review, we aimed to outline the progress of research over the past decade on electrospinning nanofibers with different morphologies and functional characteristics in environmental sensors.

Construction of ANbO3 (A= Na, K)/f-carbon nanofiber composite: Rapid and real-time electrochemical detection of hydroxychloroquine in environmental samples

Hydroxychloroquine (HCQ) is a significant viral resistant drug widely acknowledged for its immunomodulatory and anti-inflammatory activities. To minimize the impact of HCQ residues on environmental pathways, exploring control measures is vital. In this regard, electrochemical sensing of HCQ using well-structured functional materials is advantageous. This work aims to provide an economical and sustainable route for the synthesis of ANbO₃ (A = Na,K) perovskites via a thymol-menthol-based natural deep eutectic solvent. The as-synthesized NaNbO₃ and KNbO₃ are pinned to functionalized carbon nanofibers (f-CNF) via an ultrasonication approach. Benefitting from the synergistic effect of rapid electron transfer and improved surface area, enhanced electrochemical activity for NaNbO₃@f-CNF/GCE is achieved. The fabricated NaNbO₃@f-CNF displays a LOD (DPV = 0.01 μM, i-t = 0.007 μM), wide dynamic range (DPV = 0.09-22.5 μM, i-t = 0.006-35 μM), outstanding selectivity, and reproducibility, proving feasible in real-time analysis with good recovery rates (±97.67-99.81%). The NADES-mediated preparation of perovskites evades the incorporation of traditional toxic solvents and yields atom-efficient ANbO₃ (A = Na,K) associated with green solvent templates. This validates the sustainable fabrication of electrode materials with reduced energy stipulations for detecting hazardous drug pollutants in the ecosystem.

Ultrasensitive electrochemical sensor for the detection of carbamazepine based on gadolinium vanadate nanostructure decorated functionalized carbon nanofiber nanocomposite

The gadolinium vanadate nanostructure decorated functionalized carbon nanofiber (GdVO₄/f-CNF) nanocomposite was prepared by the hydrothermal method, which is fabricated on a glassy carbon electrode (GCE) for the determination of carbamazepine (CBZ). The structural morphology of the hydrothermally synthesized GdVO₄/f-CNF material was investigated by several spectroscopy methods such as FESEM, HRTEM, EDS-mapping, XRD, XPS, and Raman. Moreover, the electrical conductivity of our synthesized material was inspected by the electrochemical impedance spectroscopy (EIS) analysis, and the electrochemical performance towards CBZ was inspected by the cyclic voltammetry (CV) and amperometry (AMP) analysis under optimized conditions. The AMP determination of CBZ exhibits the lowest level LOD of 0.0018 μM and a good linear range of 0.01-157 μM. Additionally, our proposed sensor was used to determine the CBZ in the pharmaceutical and, human urine samples which have exposed the acceptable recoveries.

Recent advances in morphology, aperture control, functional control and electrochemical sensors applications of carbon nanofibers

Among many nanomaterials, electrospun carbon nanofibers (CNFs) have become one of the hot spots in nanoscience research because of their interesting physicochemical and biological properties such as large specific surface area, easy functionalization and biocompatibility. Polyacrylonitrile（PAN) has also become the most widely used precursor fiber for CNF manufacturing. In this paper, the latest advances in the synthesis of CNF by electrospinning were reviewed, including using template method, heat treatment, coaxial spinning technology to control the morphology and aperture, as well as the functionalization of electrospinning doped with chemical substances such as heteroatoms, nanoparticles (NPs), carbon nanotubes (CNTs) and grapheme (Gr), in order to further expand its application scope. The application of electrospun CNFs as electrochemical sensing platform for toxic and harmful substances in food and environment was also briefly introduced.

Bismuth sulfide microstructures decorated with functionalized boron nitride composite for electrochemical detection of sulfadiazine

In this work, the hydrothermal method was used to synthesize f-BN@Bi₂S₃ nanocomposite and used as an electrocatalyst for the detection of sulfadiazine (SD) drug. Various spectroscopic and voltammetric techniques were adopted to evaluate the morphological and structural features of the prepared materials. The modification of the electrode results in good electrocatalytic activity and excellent sensitive towards the oxidation of SD because of its huge active surface area, high sensitivity, and electrical conductivity provided by the synergistic effects of the f-BN@Bi₂S₃ nanocomposite. This modified electrode exhibited linearity in the range 0.01-62 µM at E_pa = 0.93 V (vs. Ag/AgCl). Furthermore, according to the electrochemical reaction towards the SD, a modified electrode of f-BN@Bi₂S₃ has a LOD value of 0.0015 µM, sensitivity (8.42 μA·μM^-1·cm^-2), good anti-interfering ability, and good repeatability. The suggested electrochemical sensor has high detection performance for monitoring water and urine samples. Notably, relative standard deviations (RSD) and recoveries of the proposed sensor for spiked water and urine samples are in the ranges of 0.014-0.75% and 98.97-99.98% (n = 3), respectively.

Electrocatalytic oxidation and amperometric determination of sulfasalazine using bimetal oxide nanoparticles-decorated graphene oxide composite modified glassy carbon electrode at neutral pH

Cube-shaped samarium orthovanadate (SmVO₄) nanoparticles were interconnected with a graphene oxide sheet (GOS) using a simple and eco-friendly method to generate a SmVO₄@GOS nanocomposite. SmVO₄ was characterized using various spectroscopic and microscopic techniques, which confirmed the wrapping of GOS around the SmVO₄ nanoparticles. SmVO₄@GOS was then used to modify a glassy carbon electrode (GCE), which was evaluated for its electrochemical performance toward the assay of sulfasalazine (SSZ), an antibiotic drug. Cyclic voltammetry and amperometry were both used for the assay of SSZ using the SmVO₄@GOS-modified GCE at pH 7. The modified amperometric sensor is more sensitive, with a low detection limit (2.16 nM) and wide linear range of 20 nM-667 μM (Ag/AgCl). The electrochemical oxidation of SSZ was tested with blood serum and urine samples at physiological pH with recoveries in the range 96.1-98.6%. It indicates that the modified electrochemical sensor has good sensitivity and practical applicability toward SSZ detection. In the field of non-enzymatic sensors, SmVO₄@GOS/GCE provides a highly promising performance. Therefore, the electrochemical sensors have capacity for extensive analytical applications in biomedical devices.

Fabrication of Praseodymium Vanadate Nanoparticles on Disposable Strip for Rapid and Real-Time Amperometric Sensing of Arsenic Drug Roxarsone

Nanomaterials have versatile properties owing to their high surface-to-volume ratio and can thus be used in a variety of applications. This work focused on applying a facile hydrothermal strategy to prepare praseodymium vanadate nanoparticles due to the importance of nanoparticles in today's society and the fact that their synthesis might be a challenging endeavor. The structural and morphological characterizations were carried out to confirm the influence of the optimizations on the reaction's outcomes, which revealed praseodymium vanadate (PrVO₄) with a tetragonal crystal system. In this regard, the proposed development of electrochemical sensors based on the PrVO₄ nanocatalyst for the real-time detection of arsenic drug roxarsone (RXS) is a primary concern. The detection was measured by amperometric (i-t) signals where PrVO₄/SPCE, as a new electrochemical sensing medium for RXS detection, increased the sensitivity of the sensor to about ∼2.5 folds compared to the previously reported ones. In the concentration range of 0.001-551.78 μM, the suggested PrVO₄/SPCE sensor has a high sensitivity for RXS, with a detection limit of 0.4 nM. Furthermore, the impact of several selected potential interferences, operational stability (2000 s), and reproducibility measurements have no discernible effect on RXS sensing, making it the ideal sensing device feasible for technical analysis. The real-time analysis reveals the excellent efficiency and reliability of the prosed sensor toward RXS detection with favorable recovery ranges between ±97.00-99.66% for chicken, egg, water, and urine samples.

Piezo-promoted persulfate activation by SrBi2B2O7 for efficient sulfadiazine degradation from water

Combining piezoelectric effect and persulfate (PS) activation is a newly developed strategy for refractory emerging contaminants removal. In this work, borate SrBi₂B₂O₇ (SBBO) is firstly developed as a piezoelectric material to piezo-assisted activation of PS for the removal of sulfadiazine (SDZ) under ultrasonic irradiation (US). SDZ could be efficiently degraded by 85.61 % in the system of PS/SBBO/US with a pseudo-first-order rate constant of 0.0520 min^-1, which is faster than that in the systems of PS/SBBO (0.0210 min^-1), SBBO/US (0.0041 min^-1), PS/US (0.0074 min^-1), and PS/BaTiO₃/US (0.0120 min^-1). The excellent degradation performance of the PS/SBBO/US system is mainly attributed to the piezoelectric effect of the SBBO which plays an important role in PS activation and accelerating reaction. Two oxidation processes, radical process (•O₂^- and •SO₄^-) and non-radical process (¹O₂ and electron transfer), exist during the SDZ degradation. The system of PS/SBBO/US also attains excellent removal efficiency in different SDZ contained water bodies. The possible degradation pathways mainly include cleavage of bonds, ring-opening, and hydroxylation process, and the toxicity of intermediates was predicted by T.E.S.T. software. This study provides new insight into piezoelectric catalysis associated with PS activation for SDZ removal.

Integration of iron-manganese layered double hydroxide/tungsten carbide composite: An electrochemical tool for diphenylamine H•+ analysis in environmental samples

Incompetent governance of post-harvest horticultural crops especially apples and pears lead to numerous physiological storage disorders. In order to manage this issue, diphenylamine (DPA) is widely used as an antioxidant and anti-scald agent to preserve fruits from superficial scalds and degradation during storage. As a result, this research focuses on utilizing disposable electrodes constructed with sphere-shaped iron-manganese layered double hydroxide (FeMn-LDH) entrapped tungsten carbide (WC) nanocomposite on its electrochemical performances towards emergent food contaminant, DPA. The importance of the current work is the selection and design of hierarchically structured functional materials especially layered double hydroxides, in virtue of their outstanding properties. These multi-dimensional structures when introduced to form a composite with the highly beneficial tungsten carbide offer excellent characteristics such as exceptional accessibility to active sites, enhanced surface area, and high mass transport and diffusion which serves as advantageous for the electrochemical quantification of DPA. Furthermore, the synergy between FeMn-LDH and WC nanomaterials contributes to the higher active surface area, increased electrical conductivity, fast electron transportation, and ion diffusion, resulting in static properties including a wide linear range (0.01-183.34 μM), low detection limit (1.1 nM), greater sensitivity, selectivity, and reproducibility thus confirming the potential capability of the WC@FeMn-LDH sensor towards the interference-free determination of DPA which validates its practicality and feasibility in real-time. Hence, this work aims to stimulate the fabrication of various advanced hierarchical structures by a simple hydrothermal approach that can have veracity of potential applications.

Poly(Thiophene)/Graphene Oxide-Modified Electrodes for Amperometric Glucose Biosensing

The availability of fast and non-expensive analytical methods for the determination of widespread interest analytes such as glucose is an object of large relevance; this is so not only in the field of analytical chemistry, but also in medicinal and in food chemistry. In this context, electrochemical biosensors have been proposed in different arrangements, according to the mode of electron transfer between the bioreceptor and the electrode. An efficient immobilization of an enzyme on the electrode surface is essential to assure satisfactory analytical performances of the biosensor in terms of sensitivity, limit of detection, selectivity, and linear range of employment. Here, we report the use of a thiophene monomer, (2,5-di(2-thienyl)thieno [3,2-b]thiophene (dTT-bT), as a precursor of an electrogenerated conducting film to immobilize the glucose oxidase (GOx) enzyme on Pt, glassy carbon (GC), and Au electrode surfaces. In addition, the polymer film electrochemically synthetized on a glassy carbon electrode was modified with graphene oxide before the deposition of GOx; the analytical performances of both the arrangements (without and with graphene oxide) in the glucose detection were compared. The biosensor containing graphene oxide showed satisfactory values of linear dynamic range (1.0-10 mM), limit of detection (0.036 mM), and sensitivity (9.4 µA mM^-1 cm^-2). Finally, it was tested in the determination of glucose in fruit juices; the interference from fructose, saccharose, and ascorbic acid was evaluated.

Gadolinium sesquisulfide anchored N-doped reduced graphene oxide for sensitive detection and degradation of carbendazim

Agriculture is having a major role in solving issues associated with food shortages across the globe. Carbendazim (CZM) is one of the fungicides which is commonly used in agriculture to grow crops in large quantities and fast. Monitoring CZM content is in high demand for environmental remediation. The present work deals with the synthesis of gadolinium sesquisulfide anchored Nitrogen-doped reduced graphene oxide (Gd₂S₃/NRGO) through a simple microwave-assisted method. X-ray diffraction and morphological studies confirm the formation of the nanocomposite. Gd₂S₃/NRGO showed enhanced activity both in electrochemical detection and light-driven degradation of CZM compared to Gd₂S₃ and NRGO. Gd₂S₃/NRGO modified glassy carbon electrode (GCE) exhibit a wide linear range of 0.01-450 μM CZM with 0.009 μM LOD using differential pulse voltammetry (DPV). Gd₂S₃/NRGO@GCE showed good selectivity, stability, and recovery (98.13-99.10%) in the river water sample. In addition, Gd₂S₃/NRGO has been explored towards the visible-light-induced degradation of CZM. The reactions conditions were optimized to achieve maximum efficiency. 94% of CZM was degraded within 90 min in presence of Gd₂S₃/NRGO. Mechanism of electrochemical redox reaction and degradation of CZM in presence of Gd₂S₃/NRGO has been explored to the maximum extent possible. Degradation intermediates were identified using LC-MS.

Synchronously activated strontium aluminate nanoflakes anchored functionalized carbon nanofiber nanocomposite for sensitive amperometric detection of food additive: Propyl gallate

The contemporary dietary pattern is ruined by taste enhancers, flavoring agents, and preservatives. Propyl gallate (PG) is an imperative phenolic antioxidant cast-off to inhibit the oxidative mutilation in foodstuffs thereby preventing rancidity. Determination and annihilation of PG are extensively concerned because of its probable lethal effects on human well-being. Herein, we report an electrochemical sensor using SrAl₂O₄/f-CNF nanocomposite as an efficient electrode modifier with peculiar synergistic quantum confinement effects supporting the formation of heterojunction to facilitate electron transportation between its counterparts. The structural, morphological, and crystalline features of SrAl₂O₄/f-CNF nanocomposite was thoroughly examined. The proposed sensor possesses a wide linear range (0.1-1104.75 µM) with a remarkably low limit of detection (0.075 µM) and sensitivity (1.142 µA⋅µM^-1⋅cm^-2) measured at 0.2 V (vs. Ag/AgCl). The reliability of this sensor was evidenced through real-time monitoring of PG in edible oil which is beneficial for food quality monitoring and dropping the danger of abuse of PG in foods.

Surfactant-Assisted Synthesis of Praseodymium Orthovanadate Nanofiber-Supported NiFe-Layered Double Hydroxide Bifunctional Catalyst: The Electrochemical Detection and Degradation of Diphenylamine

Physiological storage disorders are caused by ineffective post-harvest handling of horticultural crops, particularly fruits. To address these post-harvest concerns, diphenylamine (DPAH^•+) is widely used as a preservative to prevent fruit degradation and surface scald during storage around the world. Humans are negatively affected by the use of high concentrations of DPAH^•+ because of the various health complications related to its exposure. As a result, accurate detection and quantification of DPAH^•+ residues in treated fruits are critical. Rare earth metal orthovanadates, which have excellent physical and chemical properties, are potential materials for electrochemical sensors in this area. Herein, we present a simple and direct ultrasonication technique for the surfactant-assisted synthesis of praseodymium orthovanadate (PrVO₄ or PrV) loaded on nickel iron layered double hydroxide (NiFe-LDH) synthesized with deep eutectic solvent assistance, as well as its application as an effective catalyst in the detection and degradation of DPAH^•+ in fruits and water samples. The current work presents supreme electrochemical features of a PrV@NiFe-LDH-modified screen-printed carbon electrode (SPCE) where cetyltrimethylammonium bromide (CTAB) surfactant-driven fabrication of PrV directs the formation of highly qualified engineered structures and the deep eutectic solvent based green synthesis of NiFe-LDH creates hierarchical lamellar structures following the principles of green chemistry. PrV and NiFe-LDH combine to produce a synergistic effect that improves the number of active sites, charge transfer kinetics, and electronic conductivity. Differential pulse voltammetry analysis of PrV@NiFe-LDH/SPCE reveals a dynamic working range (0.005-226.26 μM), increased sensitivity (133.13 μA μM^-1 cm^-2), enhanced photocatalytic activity, and low detection limit (0.001 μM), which are considered significant when compared with the former reported electrodes in the literature for the determination of DPAḢ⁺ for its real-time applications.

Novel lanthanum vanadate-based nanocomposite for simultaneously electrochemical detection of dopamine and uric acid in fetal bovine serum

The abnormal levels of two biological molecules, dopamine (DA) and Uric acid (UA), in human body are symptoms of diseases such as Parkinson's disease and arrhythmia. A novel lanthanum vanadate and multi-walled carbon nanotubes (LaV-MWCNTs) composite modified glassy carbon electrode (GCE) was developed and utilized as an efficient electrochemical sensor for the simultaneous detection of DA and UA. LaV-MWCNTs composite was successfully fabricated by a facile ultrasonic self-assembly method and identified by means of a series of successive measurements including XPS, XRD, FT-IR and FE-SEM. The LaV-MWCNTs modified GCE shows the concentration linear ranges of DA and UA are 2-100 μΜ using DPV. The limits of detection (LODs; signal-to-noise ratio of 3, S/N = 3) of the LaV-MWCNTs modified GCE sensor for DA and UA were calculated to be 0.046 μM and 0.025 μM, respectively. The feasibility of using the LaV-MWCNTs modified GCE sensor to detect DA and UA in a typical biological fluid, fetal bovine serum, was also evaluated by the standard addition method.

Electrochemical Behavior of Three-Dimensional Cobalt Manganate with Flowerlike Structures for Effective Roxarsone Sensing

Rational design and construction of the finest electrocatalytic materials are important for improving the performance of electrochemical sensors. Spinel bioxides based on cobalt manganate (CoMn₂O₄) are of particular importance for electrochemical sensors due to their excellent catalytic performance. In this study, three-dimensional CoMn₂O₄ with the petal-free, flowerlike structure is synthesized by facile hydrothermal and calcination methods for the electrochemical sensing of roxarsone (RXS). The effect of calcination temperature on the characteristics of CoMn₂O₄ was thoroughly studied by in-depth electron microscopic, spectroscopic, and analytical methods. Compared to previous reports, CoMn₂O₄-modified screen-printed carbon electrodes display superior performance for the RXS detection, including a wide linear range (0.01-0.84 μM; 0.84-1130 μM), a low limit of detection (0.002 μM), and a high sensitivity (33.13 μA μM^-1 cm^-2). The remarkable electrocatalytic performance can be attributed to its excellent physical properties, such as good conductivity, hybrid architectures, high specific surface area, and rapid electron transportation. More significantly, the proposed electrochemical sensor presents excellent selectivity, good stability, and high reproducibility. Besides, the detection of RXS in river water samples using the CoMn₂O₄-based electrochemical sensor shows satisfactory recovery values in the range of 98.00-99.80%. This work opens a new strategy to design an electrocatalyst with the hybrid architecture for high-performance electrochemical sensing.

Well-Designed Construction of Yttrium Orthovanadate Confined on Graphitic Carbon Nitride Sheets: Electrochemical Investigation of Dimetridazole

Antibiotics are the most important drugs for people and animals to fight bacterial illnesses. Overuse of antibiotics has had unintended consequences, such as antibiotic resistance and ecosystem eradication owing to toxic chemical discharge, which have a negative influence on the biome. Herein, we report the synthesis of a hollow ellipsoid-shaped yttrium vanadate/graphitic carbon nitride (YVO₄@CN) nanocomposite by a hydrothermal approach followed by a sonochemical method for the effective detection of dimetridazole (DMZ). The synergic and coupling effect between both the phases offer non-linear cumulative ramifications which can positively enhance the individual properties of the materials under consideration. This positive hybrid effect increases the conductivity, shortens the ion-diffusion pathway, enhances the electron/ion transportation, and provides more active sites and electron-conducting channels. The accurate optimization of the experimental conditions proposes good electrocatalytic activity for the YVO₄@CN catalyst, exhibiting a good response toward DMZ detection. It reveals an extensive linear concentration range (0.001-153.3 and 176.64-351.6 μM), a low detection limit (0.8 nM), higher sensitivity (4.98 μA μM^-1 cm^-2), appreciable selectivity, increased operational stability (2200 s), and good cycle stability (60 cycles). The electrochemical performance of YVO₄@CN indicates its practical application in real-time sample analysis of several families of nitroimidazole drugs.

Toward the Development of Disposable Electrodes Based on Holmium Orthovanadate/f-Boron Nitride: Impacts and Electrochemical Performances of Emerging Inorganic Contaminants

Rare-earth metal orthovanadates have great technological relevance in the family of rare-earth compounds owing to their excellent physical and chemical properties. A significant number of studies have been carried out on this class of compounds to exploit their electrochemical properties in virtue of variable oxidation states. But holmium vanadate (HoV) and its morphology selective synthesis have not been considered, which can have potential applications similar to the rest of the family. In this work, we propose the synthesis of superior architectures of HoV with a functionalized boron nitride (f-BN) nanocomposite. The synergistic effect between HoV and f-BN can have a positive effect on the physical characteristics of the nanocomposite, which can be explored for its electrochemical capacity. Here, HoV incorporated with f-BN is explored for the electrochemical detection of Hg²⁺ ions, which is known for its toxicity-induced environmental health hazards. The structural and compositional revelation reveals higher conductivity and faster electron transfer in the composite, which facilitates a wide working range (0.02-53.8 and 64.73-295.4 μM), low limit of detection (5 nM), higher sensitivity (66.6 μA μM^-1 cm^-2), good selectivity over 10-fold higher concentration of other interfering compounds compared to Hg²⁺ ion concentration, and good cycles stability (30 segments) toward Hg²⁺ ion detection. This also envisages the morphology selective synthesis and utilization of other rare-earth metals, whose electrochemical capacities are unexplored.

CoFe2O4 supported g-C3N4 nanocomposite for the sensitive electrochemical detection of dopamine

The CoFe2O4@g-CN modified electrode has been applied for the real-time detection of DA in human biological samples with appreciable recovery results.

Sustainable synthesis of AFe2O4 (A = Mg, Zn, Mn) catalysts: comparing the photooxidative and electrochemical properties towards organic dyes detection and degradation

By serving as alternatives to toxic and hazardous solvents, green solvents assist in implementing the idea of sustainability.

Fabrication of Co3O4 nanoparticle-decorated porous activated carbon electrode for the electrochemical detection of 4-nitrophenol

Preparation of Co3O4@BVFC for the electrochemical detection of 4-NP.