Recycling exhausted magnetic biochar with adsorbed Cu2+ as a cost-effective permonosulfate activator for norfloxacin degradation: Cu contribution and mechanism

Highly efficient targeted adsorption and catalytic degradation of ciprofloxacin by a novel molecularly imprinted bimetallic MOFs catalyst for persulfate activation

Given the presence of emerging pollutants at low concentrations in water bodies, which are inevitably affected by background substances during the removal process. In this study, we synthesized molecularly imprinted catalysts (Cu/Ni-MOFs@MIP) based on bimetallic metal-organic frameworks for the targeted degradation of ciprofloxacin (CIP) in advanced oxidation processes (AOPs). The electrostatic interaction and functional group binding of CIP with specific recognition sites on Cu/Ni-MOFs@MIP produced excellent selective recognition (Qmax was 14.82 mg g-1), which enabled the active radicals to approach and remove the contaminants faster. Electron paramagnetic resonance (EPR) analysis and quenching experiments revealed the coexistence of ∙OH, SO42-, and 1O2, with ∙OH dominating the system. Based on experimental and theoretical calculations, the reaction sites of CIP were predicted and the possible degradation pathways and mechanisms of Cu/Ni-MOFs@MIP/PMS systems were proposed. This study opens up a new platform for the targeted removal of target pollutants in AOPs.

Bimetallic iron-nickel phosphide as efficient peroxymonosulfate activator for tetracycline hydrochloride degradation: Performance and mechanism

Sulfate radical-based advanced oxidation processes with (SR-AOPs) are widely employed to degrade organic pollutants due to their high efficiency, cost-effectiveness and safety. In this study, a highly active and stable FeNiP was successfully prepared by reduction and heat treatment. FeNiP exhibited high performance of peroxymonosulfate (PMS) activation for tetracycline hydrochloride (TC) removal. Over a wide pH range, an impressive TC degaradation efficiency 97.86% was achieved within 60 min employing 0.1 g/L FeNiP and 0.2 g/L PMS at room temperature. Both free radicals of SO4·-, ·OH, ·O2- and non-free radicals of 1O2 participated the TC degradation in the FeNiP/PMS system. The PMS activation ability was greatly enhanced by the cycling between Ni and Fe bimetal, and the active site regeneration was achieved due to the existence of the negatively charged Pn-. Moreover, the FeNiP/PMS system exhibited substantial TC degradation levels in both simulated real-world disturbance scenarios and practical water tests. Cycling experiments further affirmed the robust stability of FeNiP catalyst, demonstrating sustained degradation efficiency of approximately 80% even after four cycles. These findings illuminate its promising potential across natural water bodies, presenting an innovative catalyst construction approach for PMS activation in the degradation of antibiotic pollutants.

Dairy Effluent-Saturated Biochar's Short-Term Effects on Vigna unguiculata and Cynodon dactylon Performance and Soil Properties

We compared the effects of wood-, manure-, and blend-derived biochar (BC) saturated/unsaturated with dairy effluents on Vigna unguiculata and Cynodon dactylon performance and soil characteristics in a greenhouse pot study. Plant samples were assayed for herbage and root dry weight and N and C percentages. Soil samples were assayed for nutrients, pH, and conductivity. Variance analysis, Tukey's tests, Pearson's correlations, and multiple regression analysis were performed. The performance of C. dactylon was not affected. V. unguiculata's herbage and root production responded negatively to manure BC and 2% of any BC, respectively, which is mainly explained by the conductivity and soil P increase, respectively. When V. unguiculata was grown, BC inclusion decreased NO3-N and increased the soil P content. When C. dactylon was grown, only P was altered (increased) when manure or the blend BC were applied. The soil total C increased as the BC loading rate increased. The application of high BC rates was detrimental for V. unguiculata, but showed a neutral effect for C. dactylon. To improve dairy waste recycling, saturated 1% blend BC and saturated 2% blend or manure BC could be applied to V. unguiculata and C. dactylon, respectively, with no short-term negative impacts. Only wood BC avoided soil P build-up. BC application increased the soil total C, showing potential for C sequestration.

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Persulfate-based advanced oxidation processes (PS-AOPs) show a bright prospect in sewage purification. The development of efficient catalysts with simple preparation process and eco-friendliness is the key for their applying in practical water treatment. Herein, a bimetallic Cu-Fe metal organic framework (MOF) was simply synthesized by using one-pot solvothermal methods and employed for activating peroxymonosulfate (PMS) to degrade organic pollutants in water. The Cu-Fe-MOF/PMS exhibited excellent degradation efficiencies (over 95% in 30 min) for a variety of pollutants, including phenol, bisphenol A, 2,4-dichlorophenol, methyl blue, rhodamine B, tetracycline and sulfamethoxazole. The degradation efficiency was impacted by dosages of Cu-Fe-MOF, PMS concentrations, reaction temperature, solution pH and anionic species. Phenol could be efficiently decomposed in a wide pH range of 5-9, with the highest degradation and mineralization efficiency of nearly 100% and 70%, respectively. Free radicals and non-free radicals participated in degrading of phenol at the same time, with dominantly free radical process, because sulfate radicals (SO4·-) and hydroxyl radicals (·OH) were the primary active substances by contribution calculation. Cu-Fe-MOF was acted as electron shuttle between molecules of phenol and PMS, and the cooperation effect of Fe and Cu on the Cu-Fe-MOF promoted the electron transfer, achieving the high degradation efficiency of phenol. Thus, Cu-Fe-MOF is an ideal catalyst for activating PMS, which is conducive to promote the applying of catalyst-activated PMS processes for practical wastewater treatments.

Utilization of biochar for remediation of heavy metals in aqueous environments: A review and bibliometric analysis

Biochar usage for removing heavy metals from aqueous environments has emerged as a promising research area with significant environmental and economic benefits. Using the PICO approach, the research question aimed to explore using biochar to remove heavy metals from aqueous media. We merged the data from Scopus and the Web of Science Core Collection databases to acquire a comprehensive perspective of the subject. The PRISMA guidelines were applied to establish the search parameters, identify the appropriate articles, and collect the bibliographic information from the publications between 2010 and 2022. The bibliometric analysis showed that biochar-based heavy metal remediation is a research field with increasing scholarly attention. The removal of Cr(VI), Pb(II), Cd(II), and Cu(II) was the most studied among the heavy metals. We identified five main clusters centered on adsorption, water treatment, adsorption models, analytical techniques, and hydrothermal carbonization by performing keyword co-occurrence analysis. Trending topics include biochar reusability, modification, acid mine drainage (AMD), wastewater treatment, and hydrochar. The reutilization of heavy metal-loaded spent biochar includes transforming it into electrodes for supercapacitors or stable catalyst materials. This study provides a comprehensive overview of biochar-based heavy metal remediation in aquatic environments and highlights knowledge gaps and future research directions.

Elucidation of the role of metals in the adsorption and photodegradation of herbicides by metal-organic frameworks

Here, four MOFs, namely Sc-TBAPy, Al-TBAPy, Y-TBAPy, and Fe-TBAPy (TBAPy: 1,3,6,8-tetrakis(p-benzoic acid)pyrene), were characterized and evaluated for their ability to remediate glyphosate (GP) from water. Among these materials, Sc-TBAPy demonstrates superior performance in both the adsorption and degradation of GP. Upon light irradiation for 5 min, Sc-TBAPy completely degrades 100% of GP in a 1.5 mM aqueous solution. Femtosecond transient absorption spectroscopy reveals that Sc-TBAPy exhibits enhanced charge transfer character compared to the other MOFs, as well as suppressed formation of emissive excimers that could impede photocatalysis. This finding was further supported by hydrogen evolution half-reaction (HER) experiments, which demonstrated Sc-TBAPy's superior catalytic activity for water splitting. In addition to its faster adsorption and more efficient photodegradation of GP, Sc-TBAPy also followed a selective pathway towards the oxidation of GP, avoiding the formation of toxic aminomethylphosphonic acid observed with the other M3+-TBAPy MOFs. To investigate the selectivity observed with Sc-TBAPy, electron spin resonance, depleted oxygen conditions, and solvent exchange with D2O were employed to elucidate the role of different reactive oxygen species on GP photodegradation. The findings indicate that singlet oxygen (1O2) plays a critical role in the selective photodegradation pathway achieved by Sc-TBAPy.

Magnetically recyclable Cu2+ doped Fe3O4@biochar for in-situ inactivation of Microcystis aeruginosa: Performance and reusability

Harmful cyanobacterial blooms in eutrophic water bodies have frequently occurred worldwide and become a major environmental concern. Therefore, it is imperative to develop a stable and efficient algaecide to solve this issue. In this study, our purpose was to investigate the efficacy and mechanism of a newly developed Cu2+ doped Fe3O4@Biochar magnetic composite (Cu-Mag-BC) in in-situ inactivation of Microcystis aeruginosa (M. aeruginosa). We successfully synthesized the Cu-Mag-BC by coating Cu2+ onto Fe3O4@Biochar. Cu-Mag-BC exhibited superparamagnetic behavior and was uniformly impregnated by Cu2+. Cu-Mag-BC (5 mg/L), rapidly inactivated chlorophyll-a (Chl-a) in M. aeruginosa with low Fe and Cu leaching, during which time the OD264 value and malondialdehyde (MDA) content increased, while the activities of superoxide dismutase (SOD) and catalase (CAT) first increased and then decreased, due to oxidative stress induced by over-generated reactive oxygen species (ROS). Quantitative results showed that ·O2- and ·OH were the main ROS species produced from Cu-Mag-BC. Inactivation efficiency was maintained at approximately 80 % after three consecutive runs and total Chl-a removal efficiency reached 2.84 g/g, indicating good reusability and stability. A possible inactivation mechanism is proposed; amino groups and adipose chain were the primary oxidation sites. Thus, Cu-Mag-BC shows potential as a candidate for simultaneously inactivating harmful cyanobacteria and preventing secondary pollution.

Simultaneous detection and removal of mercury (II) using multifunctional fluorescent materials

Environmental problems caused by mercury ions are increasing due to growing industrialization, poor enforcement, and inefficient pollutant treatment. Therefore, detecting and removing mercury from the ecological chain is of utmost significance. Currently, a wide range of small molecules and nanomaterials have made remarkable progress in the detection, detoxification, adsorption, and removal of mercury. In this review, we summarized the recent advances in the design and construction of multifunctional materials, detailed their sensing and removing mechanisms, and discussed with emphasis the advantages and disadvantages of different types of sensors. Finally, we elucidated the problems and challenges of current multifunctional materials and further pointed out the direction for the future development of related materials. This review is expected to provide a guideline for researchers to establish a robust strategy for the detection and removal of mercury ionsin the environment.

Bias-free driven ion assisted photoelectrochemical system for sustainable wastewater treatment

Photoelectrochemical (PEC) systems have emerged as a prominent renewable energy-based technology for wastewater treatment, offering sustainable advantages such as eliminating dependence on fossil fuels or grid electricity compared to traditional electrochemical treatment methods. However, previous PEC systems often overlook the potential of ions present in wastewater as an alternative to externally applied bias voltage for enhancing carrier separation efficiency. Here we report a bias-free driven ion assisted photoelectrochemical (IAPEC) system by integration of an electron-ion acceptor cathode, which leverages its fast ion-electron coupling capability to significantly enhance the separation of electrons and holes at the photoanode. We demonstrate that Prussian blue analogues (PBAs) can serve as robust and reversible electron-ion acceptors that provide reaction sites for photoelectron coupling cations, thus driving the hole oxidation to produce strong oxidant free radicals at photoanode. Our IAPEC system exhibits superior degradation performance in wastewater containing chloride medium. This indicates that, in addition to the cations (e.g., Na+) accelerating the electron transfer rate, the presence of Cl- ions further enhance efficient and sustainable wastewater treatment. This work highlights the potential of utilizing abundant sodium chloride in seawater as a cost-effective additive for wastewater treatment, offering crucial insights into the use of local materials for effective, low-carbon, and sustainable treatment processes.

Recent advances in the synthesis and application of magnetic biochar for wastewater treatment

Magnetic biochar (MBC) is a novel bio-carbon material with both desired properties as adsorbent and magnetic characteristics. This review provides an up-to-date summary and discussion on the latest development of MBC, which covers the progress on its synthesis, application, and techno-economic analysis. The review indicates that the direct hydrothermal synthesis has been catching more research attention to produce MBC due to its mild reaction conditions. Instead of the Fe-loaded MBC, there is a trend of using Mn for the magnetization. For the MBC application, how to improve its adsorption performance for water decontamination, ideally to match that of the biochar (BC) or activated carbon, is important. In addition, more studies on the environmental impacts of MBC and life-cycle assessment decoding the process optimization options are necessary. This review will provide valuable references for the development of MBC and MBC-based materials for wastewater treatment.

Tetracycline-adsorbed biochar for solid biofuel usage to achieve waste utilization for environmental sustainability

Biochar is widely used to remove organic pollutants from the environment. Several studies have focused on pollutant removal via biochar adsorption. However, research on the subsequent processing of pollutant-adsorbed biochar is lacking. This study explored the potential of biochar for the adsorption of an aquatic organic pollutant (tetracycline) and its subsequent use as a solid biofuel. These results suggest that corn straw-derived biochar (torrefaction and pyrolysis) is suitable for two-stage utilization to achieve bioresource valorization for environmental sustainability. Tetracycline-adsorbed biochar, particularly biochar pyrolyzed at 600 °C, is suitable for use as a biofuel. The biochar produced via torrefaction (300 °C) and pyrolysis (600 °C) is the optimal choice, with surface area, contact angle, graphitization degree, calorific value, enhancement factor, and upgrading energy index values of 172.48 m2/g, 120.4°, 3.87, 26.983 MJ/kg, 1.58, and 33.72, respectively. This is supported by the results of expense calculation, comprehensive performance analysis, and life-cycle assessment. Overall, the biochar produced in this study is suitable for organic pollutant removal and as solid biofuel; thus, it can be used to realize waste utilization for environmental sustainability.

Phosphorus doped cyanobacterial biochar catalyzes efficient persulfate oxidation of the antibiotic norfloxacin

In this study, cyanobacterial biochars (CBs) enriched/doped with non-metallic elements were prepared by pyrolysis of biomass amended with different N, S, and P containing compounds. Their catalytic reactivity was tested for persulfate oxidation of the antibiotic norfloxacin (NOR). N and S doping failed to improve CB catalytic reactivity, while P doping increased reactivity 5 times compared with un-doped biochar. Biochars produced with organic phosphorus dopants showed the highest reactivity. Post-acid-washing improved catalytic reactivity. In particular, 950 ℃ acid-washed triphenyl-phosphate doped CB showed the largest degradation rate and reached 79% NOR mineralization in 2 h. Main attributes for P-doped CBs high reactivity were large specific surface areas (up to 655 m2/g), high adsorption, high C-P-O content, graphitic P and non-radical degradation pathway (electron transfer). This study demonstrates a new way to reuse waste biomass by producing efficient P-doped metal-free biochars and presents a basic framework for designing carbon-based catalysts for organic pollutant degradation.

Recycling waste iron-rich algal flocs as cost-effective biochar activator for heterogeneous Fenton-like reaction towards tetracycline degradation: Important role of iron species and moderately defective structures

Harvesting aquatic harmful algal blooms (HABs) and reusing them is a promising way for antibiotic degradation. Herein, a novel iron-rich biochar (Fe-ABC), derived from algal biomass harvested by magnetic coagulation, was successfully designed and fabricated as activator for heterogeneous Fenton-like reaction. The modification methods and pyrolysis temperatures (400-800 °C) were optimized to enhance the formation of rich iron species and moderately defective structure, yielding Fe-ABC-600 with enhanced electron transfer and H2O2 activation capability. Thus, Fe-ABC-600 exhibited superior removal efficiency (95.33%) on tetracycline (TC), where the presence of multiple iron species (Fe3+, Fe2+ and Fe4+) and moderately defective structure accelerating the Fenton-like oxidation. The concentration of leaching Fe after each reaction was all below 0.74 mg/L in five cycles, ensuring the sustained degradation. And •OH was proved to be the major radical contributing to the degradation of TC, as well as the direct electron transfer mechanism together, in which the CO acted as electron regulator and electron donor. Fe-ABC as a cost-effective catalyst has notable application potentials in TC removal from wastewater owing to its remarkable advantages of high resource utilization, enhanced catalytic property, high ecological safe, notable TC degradation efficiency, low cost and environmental-friendliness.

Efficient degradation of norfloxacin using a novel biochar-supported CuO/Fe3O4 combined with peroxydisulfate: Insights into enhanced contribution of nonradical pathway

Nonradical persulfate oxidation techniques have evolved as a new contaminated water treatment approach due to its great tolerance to water matrixes. The catalysts of CuO-based composites have received much attention in that aside from SO₄^•-/^•OH radicals, the nonradicals of singlet oxygen (¹O₂) can be also generated during persulfate activation via CuO. However, the issues regarding particles aggregation and metal leaching from the catalysts during the decontamination process remain to be addressed, which could have a remarkable impact on the catalytic degradation of organic pollutants. Accordingly in the present study, a novel biochar-supported bimetallic Fe₃O₄-CuO catalyst (CuFeBC) was facilely developed to activate peroxodisulfate (PDS) for the degradation of norfloxacin (NOR) in aqueous solution. The results showed CuFeBC has a superior stability against metal ions Cu/Fe leaching, and NOR (30 mg L^-1) was degraded at 94.5% within 180 min in the presence of CuFeBC (0.5 g L^-1) and PDS (6 mM) in pH 8.5. The scavenging of reactive oxygen species and electron spin resonance analysis revealed that ¹O₂ dominated the degradation of NOR. Compared with pristine CuO-Fe₃O₄, the interaction between biochar substrate and metal particles could significantly enhance the contribution of the nonradical pathway to NOR degradation from 49.6% to 84.7%. Biochar substrate could efficiently reduce the leaching of metal species from the catalyst, thereby maintaining excellent catalytic activity and lasting reusability of the catalyst. These findings could enlighten new insights into fine-tuning radical/nonradical processes from CuO-based catalysts for the efficient remediation of organic contaminants in polluted water.

Degradation of tetracycline by peroxymonosulfate activated with Mn0.85Fe2.15O4-CNTs: Key role of singlet oxygen

Tetracycline (TC) is a kind of electron-rich organic, and singlet oxygen (¹O₂) oxidative pathway-based advanced oxidation processes (AOPs) have represented outstanding selective degradation to such pollutants. In this paper, an excellent prepared strategy for ¹O₂ dominated catalyst was adopted. A catalyst composed of non-stoichiometric doping Mn-Fe bimetallic oxide supported on CNTs (0.3-Mn_0.85Fe_2.15O₄-CNTs) was synthesized and optimized by regulating the non-stoichiometric doping ratio of Mn & Fe and the loading amount of CNTs. Through optimization and control experiments, the optimized catalyst represented 94.9% of TC removal efficiency within 60 min in neutral condition under relatively low concentrations of Mn_0.85Fe_2.15O₄-CNTs (0.4 g/L) and PMS (0.8 mM). Through SEM and XRD characterization, Mn_0.85Fe_2.15O₄-CNTs was a hybrid of cubic Mn_0.85Fe_2.15O₄ uniformly dispersing on CNTs. By the characterization of XPS and FT-IR, more CO bonds and low-valent Mn (II) & Fe (II) appeared in Mn_0.85Fe_2.15O₄-CNTs. Reactive oxygen species (ROS) was determined by radical quenching experiments and electron spin resonance (EPR) spectroscopy, and ¹O₂ was verified to be the dominated ROS. The mechanism for PMS' activation was speculated, and more low-valent Mn (II) and Fe (II) contributed to the production of free-radical (•OH & SO₄^•-), while the reaction between PMS and the enhanced CO bond on Mn_0.85Fe_2.15O₄-CNTs played a crucial part in the generation of ¹O₂. In addition, through the comparative degradation of four different organics with distinct charge densities, the excellent selectivity of ¹O₂-based oxidative pathway to electron-rich pollutants was found. This paper supplied a good strategy to prepare catalyst for PMS activation to form a ¹O₂-dominated oxidative pathway.

The debatable role of singlet oxygen in persulfate-based advanced oxidation processes

Singlet oxygen (¹O₂) attracts much attention in persulfate-based advanced oxidation processes (PS-AOPs), because of its wide pH tolerance and high selectivity toward electron-rich organics. However, there are conflicts about the ¹O₂ role in PS-AOPs on several aspects, including the formation of different key reactive oxygen species (ROS) at similar active sites, pH dependence, broad-spectrum activity, and selectivity in the elimination of organic pollutants. To a large degree, these conflicts root in the drawbacks of the methods to identify and evaluate the role of ¹O₂. For example, the quenchers of ¹O₂ have high reactivity to other ROS and persulfate as well. In addition, electron transfer process (ETP) also selectively oxidizes organics, having a misleading effect on the identification of ¹O₂. Therefore, in this review, we summarized and discussed some basic properties of ¹O₂, the debatable role of ¹O₂ in PS-AOPs on multiple aspects, and the methods and their drawbacks to identify and evaluate the role of ¹O₂. On the whole, this review aims to better understand the role of ¹O₂ in PS-AOPs and further help with its reasonable utilization.

Bamboo-based magnetic activated carbon for efficient removal of sulfadiazine: Application and adsorption mechanism

Due to increasing antibiotic pollution in the water environment, green and efficient adsorbents are urgently needed to solve this problem. Here we prepare magnetic bamboo-based activated carbon (MDBAC) through delignification and carbonization using ZnCl₂ as activator, resulting in production of an activated carbon with large specific surface area (1388.83 m² g^-1). The influencing factors, such as solution pH, initial sulfadiazine (SD) concentration, temperature, and contact time, were assessed in batch adsorption experiments. The Langmuir isotherm model demonstrated that MDBAC adsorption capacity on SD was 645.08 mg g^-1 at its maximum, being higher than majority of previously reported adsorbents. In SD adsorption, the kinetic adsorption process closely followed the pseudo-second kinetic model, and the thermodynamic adsorption process was discovered to be exothermic and spontaneous in nature. The MDBAC exhibited excellent physicochemical stability, facile magnetic recovery and acceptable recyclability properties. Moreover, the synergistic interactions between MDBAC and SD mainly involved electrostatic forces, hydrogen bonding, π-π stacking, and chelation. Within the benefits of low cost, ease of production and excellent adsorption performance, the MDBAC biosorbent shows promising utilization in removing antibiotic contaminants from wastewater.

Synergistic adsorption and oxidation of trivalent antimony from groundwater using biochar supported magnesium ferrite: Performances and mechanisms

Antimony (Sb) pollution is considered an environmental problem, since Sb is toxic and carcinogenic to humans. Here, a novel biochar supported magnesium ferrite (BC@MF) was adopted for Sb(III) removal from groundwater. The maximum adsorption capacity was 77.44 mg g^-1. Together with characterization, batch experiments, kinetics, isotherms, and thermodynamic analyses suggested that inner-sphere complexation, H-bonding, and electrostatic interactions were the primary mechanisms. C-C/CC, C-O, and O-CO groups and Fe/Mg oxides might have acted as adsorption sites. The adsorbed Sb(III) was oxidized to Sb(V). The generation of reactive oxygen species, iron redox reaction, and oxidizing functional groups all contributed to Sb(III) oxidation. Furthermore, the fixed-bed column system demonstrated a satisfactory Sb removal performance; BC@MF could treat ∼6060 BV of simulated Sb-polluted groundwater. This research provides a promising approach to sufficiently remove Sb(III) from contaminated groundwater, providing new insights for the development of innovative strategies for heavy metal removal.

Remediation of environmentally persistent organic pollutants (POPs) by persulfates oxidation system (PS): A review

Over the past few years, persistent organic pollutants (POPs) exhibiting high ecotoxicity have been widely detected in the environment. Persulfate-oxidation hybrid system is one of the most widely used novel advanced oxidation techniques and is based on the persulfate generation of SO₄^-∙ and ∙OH from persulfate to degrade POPs. The overarching aim of this work is to provide a critical review of the variety of methods of peroxide activation (e.g., light activated persulfate, heat-activated persulfate, ultrasound-activated persulfate, electrochemically-activated persulfate, base-activated persulfate, transition metal activated persulfate, as well as Carbon based material activated persulfate). Specifically, through this article we make an attempt to provide the important characteristics and uses of main activated PS methods, as well as the prevailing mechanisms of activated PS to degrade organic pollutants in water. Finally, the advantages and disadvantages of each activation method are analyzed. This work clearly illustrates the benefits of different persulfate activation technologies, and explores persulfate activation in terms of Sustainable Development Goals, technical feasibility, toxicity assessment, and economics to facilitate the large-scale application of persulfate technologies. It also discusses how to choose the most suitable activation method to degrade different types of POPs, filling the research gap in this area and providing better guidance for future research and engineering applications of persulfates.

Insights into the heavy metal adsorption and immobilization mechanisms of CaFe-layered double hydroxide corn straw biochar: Synthesis and application in a combined heavy metal-contaminated environment

Biochar is an emerging eco-friendly and high-efficiency heavy metal (HM) adsorbent that exhibits satisfactory HM remediation effects in both water and soil environments. However, few studies have investigated the mechanisms and application of biochar in the remediation of combined HM-contaminated environments. Therefore, in the present study, a novel corn straw biochar-loaded calcium-iron layered double hydroxide composite (CaFe-LDH@CSB) was synthesized via the coprecipitation method and applied as a remediation adsorbent to remove HMs in both water and soil environments. The results indicated that the HM adsorption mechanism of CaFe-LDH@CSB in the aquatic phase involved a chemical endothermic adsorption process of functional group-complexed monolayers, dominated by precipitation, ion exchange, complexation and π bond interactions. The maximum adsorption capacity for Cd(II), Pb(II), Zn(II) and Cu(II) in the aqueous phase reached 24.58, 240.96, 57.57 and 39.35 mg g^-1, respectively. In addition, application of CaFe-LDH@CSB in the combined HM-contaminated soil treatment helped to increase the soil pH, which increased by 5.1-17.9% in low-contamination (LC) soil and by 7.0-13.9% in high-contamination (HC) soil. Moreover, application of CaFe-LDH@CSB effectively decreased the acid-soluble fraction of HMs and increased the HM residual fraction. The immobilization mechanism of CaFe-LDH@CSB in the soil was concluded to involve pore filling, functional group action and electrostatic interactions. Overall, this study provided a novel LDH biochar composite that can be effectively applied in the remediation of combined HM-contaminated water and soil environments.

Pilot-scale advanced treatment of actual high-salt textile wastewater by a UV/O3 pressurization process: Evaluation of removal kinetics and reverse osmosis desalination process

Advanced oxidation processes (AOPs) such as ozonation and Fenton processes are widely used in the treatment of high-salt wastewater. The UV/O₃ pressurization process was designed and applied at the pilot-scale for treatment of actual high-salt textile wastewater. The UV/O₃ pressurization process achieved the highest decolorization (85 %) and chemical oxygen demand (COD_Cr, 43.2 %) removal efficiency at an O₃ dosage of 200 g·t^-1 and a pressure of 0.2 MPa. Compared to ordinary ozonation, the UV/O₃ pressurization process improved the solubility and gas-liquid mass transfer efficiency of O₃ in wastewater and generated a large number of O₃ microbubbles. Hydroxyl radical (·OH), superoxide radicals (O₂·^-) and single oxygen (¹O₂) all played a significant role on the removal of pollutants in wastewater during the UV/O₃ pressurization process. The reverse osmosis (RO) process was used to evaluate the effect of UV/O₃ pressurization and Fenton pre-oxidation processes on the desalination process as the last process in treating high-salt organic wastewater. The pre-oxidation processes improved the initial RO water flux. Compared with the Fenton process, the UV/O₃ pressurization process had less membrane fouling (thin fouling layer vs thick fouling layer), and final water flux (59.4 LMH) was higher than that of Fenton process (34.9 LHM). The total dissolved solids (TDS), Cl^- and SO₄^2- of the effluent from UV/O₃ pressurization process (37.2, 7.6 and 3.0 mg·L^-1) were better than that of Fenton process (65.7, 13.9 and 7.1 mg·L^-1). Therefore, the UV/O₃ pressurization process without secondary pollution is more suitable for the advanced treatment of high-salt organic wastewater than the Fenton process.

Efficient peroxymonosulfate activation by biochar-based nanohybrids for the degradation of pharmaceutical and personal care products in aquatic environments

Recently, pharmaceutical and personal care products (PPCPs) have been of wide concern due to their ecological toxicity, persistence, and ubiquity in aquatic environments. Peroxymonosulfate-based advanced oxidation processes (PMS-AOPs) have shown great potential for eliminating PPCPs due to their superior oxidation ability and adaptability. Biochar-based nanohybrids have been employed as emerging catalysts for peroxymonosulfate (PMS) activation. Until now, few researchers have summarized PMS activation by biochar-based catalysts for PPCPs removal. In this review, the types, sources, fates, and ecological toxicities of PPCPs were first summarized. Furthermore, various preparation and modification methods of biochar-based catalysts were systematically introduced. Importantly, the application of activating PMS with biochar-based multifunctional nanocomposites for eliminating PPCPs was reviewed. The influencing factors, such as catalysts dosage, PMS dosage, solution pH, temperature, anions, natural organic matters (NOMs), and pollutants concentration were broadly discussed. Biochar-based catalysts can act as electron donors, electron acceptors, and electron shuttles to activate PMS for the removal of PPCPs through radical pathways or/and non-radical pathways. The degradation mechanisms of PPCPs are correlated with persistent free radicals (PFRs), metal species, defective sites, graphitized degree, functional groups, electronic attributes, and the hybridization modes of biochar-based catalysts. Finally, the current problems and further research directions on the industrial application of biochar-based nanocomposites were proposed. This study provides some enlightenment for the efficient removal of PPCPs with biochar-based catalysts in PMS-AOPs.

Hydrolysis of norfloxacin in the hyporheic zone: kinetics and pathways

Understanding the hydrolysis behavior and pathway of norfloxacin (NOR) in the hyporheic zone (HZ) is important for predicting its environmental persistence. Therefore, the effects of different environmental factors on NOR hydrolysis were investigated, and the hydrolysis pathway of NOR in the HZ was determined by DFT calculations and UPLC/TOF-MS. The hydrolysis process of NOR was consistent with the first-order kinetic. The experiment of environmental factors showed that DO was an important factor to affect NOR hydrolysis, and its hydrolysis rate was positively correlated with DO concentration. The superoxide radical (·O2-) was the main active species for NOR hydrolysis. The hydrolysis rates of NOR under neutral and alkaline conditions were higher than that under acidic conditions in both aerobic and anoxic environments. The ions of Ca2+, Mg2+, HCO3-, CO32-, and NO3- in simulated water samples inhibited the hydrolysis of NOR, while Cl- promoted its hydrolysis. In addition, the electronegativity of NOR was determined by DFT calculations, and it was speculated that the active sites of NOR hydrolysis were mainly located in the piperazine ring and quinolone ring. The main hydrolysis pathway of NOR in aerobic environment was piperazine ring cracking and quinolone ring decomposition, and that in anoxic environment was piperazine ring cracking. The results are of great significance to evaluate the environmental fate of NOR in the HZ and provide a theoretical basis for further understanding the degradation and governance of fluoroquinolones in water environment.

Sustainable conversion of saturated adsorbents (SAs) from wastewater into value-added products: future prospects and challenges with toxic per- and poly-fluoroalkyl substances (PFAS)

Following circular economy principles, the reuse or recycling of saturated adsorbents (SAs or adsorbate-laden adsorbents) into a low-cost engineered product is a valuable alternative to eliminate secondary pollution after adsorption. This review evaluates the application of SAs for the generation of products that can serve as (i) antimicrobial agents or disinfectants, (ii) materials for civil construction, (iii) catalysts, (iv) fertilizers, and (v) secondary adsorbents. The importance of SAs configuration in terms of functional groups, surface area and pore morphology played a crucial role in their reutilization. The SAs-laden silver ions (Ag⁺) strongly inhibit (~ 99%) the growth of Escherichia coli and Staphylococcus aureus microbes found in drinking and wastewaters. The intra-solidification of SAs containing toxic metal pollutants (As³⁺ and F^-) with cementitious materials can effectively reduce their leaching below permissible limits of USEPA standards for their utility as additives in construction work. The existence of transition metal ions (Cu²⁺, Cr^3+/6+, Ni²⁺) on the surface of SAs boosted activity and selectivity towards the desired product during catalytic oxidation, degradation, and conversion processes. The thermally recycled SAs can assist in the secondary adsorption of pollutants from another waste solution due to a larger surface area (> 1000 m²g^-1). However, there are chances that the SAs discussed above will contain traces of PFAS. The article summarizes the challenges, performance efficacy, and future prospects at the end of each value-added product. We also highlight critical challenges for managing PFAS-laden SAs and stimulate new perspectives to minimize PFAS in air, water, and soils.

Fast peroxydisulfate oxidation of the antibiotic norfloxacin catalyzed by cyanobacterial biochar

Peroxydisulfate (PDS) is a common oxidant for organic contaminant remediation. PDS is typically activated by metal catalysts to generate reactive radicals. Unfortunately, as radicals are non-selective and metal catalysts may cause secondary contamination, alternative selective non-radical pathways and non-metal catalysts need attention. Here we investigated PDS oxidation of commonly detected antibiotic Norfloxacin (NOR) using cyanobacterial nitrogen rich biochars (CBs) as catalysts. NOR was fully degraded by CB pyrolysed at 950 °C (CB950) within 120 min. CB950 caused threefold faster degradation than low pyrolysis temperature (PT) CBs and achieved a maximum surface area normalized rate constant of 4.38 × 10^-2 min^-1 m^-2 L compared to widely used metal catalysts. CB950 maintained full reactivity after four repeated uses. High defluorination (82%) and mineralization (>82%) were observed for CB950/PDS. CBs were active over a broad pH range (3-10), but with twice as high rates under alkaline compared with neutral conditions. NOR is degraded by organic, ^•OH and SO₄^•- radicals in low PT CBs/PDS systems, where the presence of Mn^II promotes radical generation. Electron transfer reactions with radicals supplemented dominate high PT CBs/PDS systems. This study demonstrates high PT biochars from algal bloom biomass may find use as catalysts for organic contaminant oxidation.

Norfloxacin adsorption and subsequent degradation on ball-milling tailored N-doped biochar

N-doping is an effective way to modify biochar for enhancing the adsorption capacity. The synthesis of N-doped biochar by the ball-milling method has been attractive due to its facile and eco-friendly approach with low energy consumption. However, the commonly used N-precursor NH₃·H₂O is environmentally harmful. It is needed to prepare safe and non-toxic N-doped biochar for large-scale production. Here, a urea N-doped biochar (U-MBC) was prepared by the ball-milling method and used for norfloxacin (NOR) removal. The results showed that U-MBC exhibited almost 4-fold higher adsorption capacity for NOR than pristine biochar in a wide pH range (3-9). The adsorption enhancement was owing to the enhancement of H-bonds, π-π electron donor-acceptor, and pore-filling interactions due to the N-doping and ball-milling method. Additionally, 89% of adsorbed NOR can be further removed after 6 h milling. The regenerated U-MBC still had a good adsorption capacity (46.27 mg g^-1) and performed well in three cycles. The knowledge gained from this study could encourage researchers to use urea or similar safe N-precursors with the ball-milling method for the large-scale production of N-doped biochar to remove antibiotic organic pollutants in the environment.

Selective capture of Pd(II) from aqueous media by ion-imprinted dendritic mesoporous silica nanoparticles and re-utilization of the spent adsorbent for Suzuki reaction in water

The development of highly efficient adsorptive material for the selective capture of Pd(II), and re-utilization of spent Pd(II)-loaded adsorbent as an efficient catalyst for organic synthesis are of great significance, but challenging. Particularly, the heterogeneous palladium-catalyzed Suzuki reaction in aqueous media is much more challenging than that of homogeneous. Herein, several novel Pd(II) ion-imprinted polymers (PIIPs) based on dendritic fibrous silica particles are constructed by surface ion imprinting technology (SIIT), using Schiff base and pyridine groups functionalized organosilicon as functional monomer. The PIIP-3 prepared by 3 g of functional monomer exhibits the best adsorption performance, and shows ultrafast (10 min) and selective capture of Pd(II) with high uptake capacity (382.5 mg/g). Moreover, the waste Pd(II) loaded PIIP-3 (PIIP-3-Pd) can serve as a catalyst towards the Suzuki reaction in water, affording 94.2 % yield of the desired product. Interestingly, the PIIP-3-Pd can be reused 12 times without an appreciable decrease in catalytic activity, which is probably due to the imprinted cavity and specific recognition site of PIIP-3 can match and recapture Pd active species in a complex catalytic environment. Thus, this work demonstrates huge potentials of SIIT to enhance the selectivity of adsorption process and increase the lifetime of catalysts.

Highly efficient photocatalytic degradation of norfloxacin via Bi2Sn2O7/PDIH Z-scheme heterojunction: Influence and mechanism

The severe pollution caused by antibiotics has prompted considerable concerns in recent decades. In this study, the Bi₂Sn₂O₇/PDIH Z-scheme heterojunction photocatalyst was synthesized and highly photocatalytic activity on norfloxacin was obtained. The degradation of norfloxacin reached 98.71% in 90 min under visible light. The apparent rate constant of norfloxacin (0.4 903 min^-1) was 3.65 and 20 times that of PDIH and the Bi₂Sn₂O₇. Meanwhile, XPS, electrochemical, Photoluminescence spectroscopy and electron paramagnetic resonance results showed that Z-scheme charge-transfer process facilitated the spatial carrier separation and preserve redox capability. Furthermore, the degradation intermediates of norfloxacin and their toxicities were evaluated. Finally, in the view of the survey about the impact of different water matrices, it was found that the Bi₂Sn₂O₇/PDIH maintained high efficiency in raw natural water. This work enriched inorganic/organic heterojunction engineering for PDIH, and provided the enormous potential for combining the Bi₂Sn₂O₇ with PDIH to address the antibiotic pollution issues in the actual water treatment.

Soybean straw biochar activating peroxydisulfate to simultaneously eliminate tetracycline and tetracycline resistance bacteria: Insights on the mechanism

Tetracycline (TC) has been frequently detected in various environments, thus promoting the occurrence of resistance in bacterial populations. In this study, a suite of soybean straw biochars (SSBs) were fabricated under different pyrolysis temperatures (600-1000 °C), which were utilized as peroxydisulfate (PS) activators for TC degradation and TC resistant Escherichia coli (E. coli) disinfection. The purification effect of SSBs/PS systems manifested obvious positive dependence on pyrolysis temperature of SSBs with SSB1000/PS system obtained the superior TC degradation, E. coli disinfection and coexisting TC and E. coli elimination capacity. The leakage of intracellular DNA and the degradation of total DNA and extracellular DNA was revealed no matter in alone E. coli or combined pollution which can also be supported by the gradual ruptured bacterial morphology and attenuated internal components. It can be found that TC adsorption in SSBs played a significant role on TC degradation, while the electrostatic repulsion always existed between E. coli and SSB1000. Furthermore, a battery of solid evidences collectively demonstrated the significant different purification mechanism of TC and E. coli. The TC degradation was achieved dominantly by surface-bound radicals, while bactericidal activity should be attributed to free SO4·- in bulk solutions. In contrast to other SSBs, the largest mesopore volumes, highest C=O content, lowest interfacial charge transfer resistance and strongest electron donating capacity explained the outperformed catalytic performance of SSB1000.

Degradation of tetracycline by atmospheric-pressure non-thermal plasma: Enhanced performance, degradation mechanism, and toxicity evaluation

Tetracycline is a common antibiotic and is often carelessly released into the natural environment, thus constantly posing potential threats to the environment. Currently, due to lack of effective methods to remove it from the environmental water system, researchers are still exploring new ways to deal with tetracycline. In this work, we employed atmospheric-pressure non-thermal plasma (NTP) to treat tetracycline in water and investigated the involved degradation mechanism. The enhanced degradation efficiency was acquired and investigated, and the degradation mechanism by the plasma-generated active species were explored. The tetracycline degradation pathways via especially the interactions with plasma-generated hydroxyl radical and ozone were examined by virtue of UV spectroscopy, three-dimensional fluorescence spectroscopy, high performance liquid chromatography-mass spectrometry (HPLC-MS), together with the assistance of theoretical simulations. Moreover, the toxicological evaluation of NTP treatment of tetracycline was also provided, which confirmed that the biological toxicity of tetracycline degradation products was negligible. Therefore, this work provides not only the effective way of treating antibiotics by engineered plasma technology, but also the insights into the mechanisms of degradation of antibiotics by NTP.

Removal of heavy metals from wastewaters with biochar pyrolyzed from MgAl-layered double hydroxide-coated rice husk: Mechanism and application

This study reports a MgAl-LDH rice husk biochar composite (MgAl-LDH@RHB) with a regular hydrotalcite structure synthesized by a simple hydrothermal method, which was then used to remove Cd(II) and Cu(II) from water. The influencing factors on the adsorption performance were determined through batch adsorption experiments, and the adsorption characteristics and cycling capacity were evaluated with eight models and adsorption-desorption experiments. The results showed that the adsorption of Cd(II) and Cu(II) by MgAl-LDH@RHB conformed to the Langmuir-Freundlich model and PSO kinetics model, indicating single-layer chemical adsorption. In addition, the experimental maximum adsorption capacities for Cd(II) and Cu(II) were 125.34 and 104.34 mg g^-1, respectively. The adsorption of Cd(II) and Cu(II) by MgAl-LDH@RHB was dominated by surface precipitation and ion exchange. The findings reveal the mechanism for the heavy metal removal by MgAl-LDH@RHB and provide a theoretical reference for agricultural waste disposal and water pollution control.

Catalytic ozonation performance and mechanism of Mn-CeOx@γ-Al2O3/O3 in the treatment of sulfate-containing hypersaline antibiotic wastewater

Herein, we attempted to apply an alumina-based bimetallic (Mn-Ce) catalyst as an O₃ activator and explored the feasibility of the treatment of hypersaline organic wastewater. Compared with independent O₃ (35.00 ± 4.20%), mineralization of ciprofloxacin (CIP) under the Mn-CeO_x@γ-Al₂O₃/O₃ (MCAO) process was elevated to 76.04 ± 2.30%. The synergetic corporation among multivalence redox pairs of Mn (III)/Mn (IV), Ce (III)/Ce (IV) promoted the protonation of the surface hydroxyl group (S-OH₂⁺), and subsequently the dominant reactive oxygen species in the MCAO process, OH and O₂^-, were generated rapidly. However, the mineralization of CIP decreased in MCAO/SO₄^2- system due to the formation of SO₄^-, which reacted with CIP more slowly (8.4 × 10⁸ M^-1 s^-1) than OH (4.1 × 10⁹ M^-1 s^-1). In MCAO/SO₄^2-/Cl^- mixture saline conditions, mineralization of CIP was improved at low Cl^- concentration (0.5 wt%) due to the generation of Cl, while inhibited with excessive Cl^- (≥1.5 wt%) owing to the formation of residual chlorides (Cl₂, Cl₂^- and ClO^-). Meanwhile, the MCAO process possessed promising capability to remediate hypersaline wastewater containing dyes, phenol and pesticides, as well as actual salinity-rich wastewater. Based on the above, the present study would provide new insights into hypersaline organic wastewater treatment by the MCAO process.

Magnetic MgFe2O4/biochar derived from pomelo peel as a persulfate activator for levofloxacin degradation: Effects and mechanistic consideration

Biochar (BC) has been demonstrated the potential to activate persulfate (PS), but the limited catalytic efficiencies hindered their further application. Herein, an innovative magnetic MgFe₂O₄/BC (MMB) derived from pomelo peel was prepared for persulfate-based advanced oxidation process (PS-AOPs). Benefitting from the extraordinary properties, levofloxacin (LFX) was efficiently removed in the MMB/PS system. MMB700 exhibited the best catalytic activity, 87.87% of LFX was removed in the MMB700/PS system. In addition, it could maintain 67.90% of LFX degradation efficiency after 3 times of reuse. Quenching experiments, electron spin resonance (ESR) detection, and electrochemical test results indicated that both non-radical pathway and direct electron-transfer pathway advanced LFX degradation. LFX was oxidized by O₂^·- and ¹O₂, O₂^·- acted as the dominant active species. PS activation was induced by the active sites of MMB700. This work not only developed a promising magnetic biochar PS catalyst for antibiotics elimination, but also facilitated insights PS activation mechanisms.

Insights into selective adsorption mechanism of copper and zinc ions onto biogas residue-based adsorbent: Theoretical calculation and electronegativity difference

Modified biomass-based adsorption technique has attracted much attention in heavy metal ions removal, but selective adsorption behavior and mechanism of heavy metal ions adsorption onto biosorbent still need to be further clarified. Herein, a carboxylated biogas residue (BR-COOH) was prepared to remove the Cu²⁺ and Zn²⁺ from single/binary heavy metal ions solution and explore selective adsorption mechanism. The results exhibited that the adsorption capacities of BR-COOH for Cu²⁺ was higher than that for Zn²⁺ obviously, whether in the single or binary heavy metal ions solution. Meanwhile, the introduced carboxy groups were identified as the main sites for metal ions adsorption. Density functional theory (DFT) calculation results exhibited that the adsorption energy of Cu²⁺ (-0.51 eV) onto BR-COOH was lower than that of Zn²⁺ (-0.47 eV), indicating that the Cu²⁺ adsorbed on BR-COOH was more stable than Zn²⁺. Moreover, the metal ions adsorption capacity of BR-COOH was positively correlated with their electronegativity, which was due to that the metal ions with stronger electronegativity was more easily interacted with the negatively charged oxygen in carboxyl groups. The same results were also verified in the control experiment conducted with two other biosorbents. Therefore, the work provided a new and in-depth insight into selective adsorption of metal ions onto carboxylated biosorbent.

Preparation, characterization, and applications of Fe-based catalysts in advanced oxidation processes for organics removal: A review

Fe-based catalysts as low-cost, high-efficiency, and non-toxic materials display superior catalytic performances in activating hydrogen peroxide, persulfate (PS), peracetic acid (PAA), percarbonate (PC), and ozone to degrade organic contaminants in aqueous solutions. They mainly include ferrous salts, zero-valent iron, iron-metal composites, iron sulfides, iron oxyhydroxides, iron oxides, and supported iron-based catalysts, which have been widely applied in advanced oxidation processes (AOPs). However, there is lack of a comprehensive review systematically reporting their synthesis, characterization, and applications. It is imperative to evaluate the catalytic performances of various Fe-based catalysts in diverse AOPs systems and reveal the activation mechanisms of different oxidants by Fe-based catalysts. This work detailedly summarizes the synthesis methods and characterization technologies of Fe-based catalysts. This paper critically evaluates the catalytic performances of Fe-based catalysts in diverse AOPs systems. The effects of solution pH, reaction temperature, coexisting ions, oxidant concentration, catalyst dosage, and external energy on the degradation of organic contaminants in the Fe-based catalyst/oxidant systems and the stability of Fe-based catalysts are also discussed. The activation mechanisms of various oxidants and the degradation pathways of organic contaminants in the Fe-based catalyst/oxidant systems are revealed by a series of novel detection methods and characterization technologies. Future research prospects on the potential preparation means of Fe-based catalysts, practical applications, assistive technologies, and impact in AOPs are proposed.

Engineering conversion of Asteraceae plants into biochars for exploring potential applications: A review

Asteraceae presents one of the most globally prevalent, cultivated, and fundamental plant families. However, a large amount of agricultural wastes has been yearly released from Asteraceae crops, causing adverse impacts on the environment. The objective of this work is to have insights into their biomass potentials and technical possibility of conversion into biochars. Physicochemical properties are systematically articulated to orientate environmental application, soil amendment, and other utilizations. Utilizations of Asteraceae biochars in wastewater treatment can be categorized by heavy metal ions, organic dyes, antibiotics, persistent organic pollutants (POPs), and explosive compounds. Some efforts were made to analyze the production cost, as well as the challenges and prospects of Asteraceae-based biochars.