Oily sludge derived carbons as peroxymonosulfate activators for removing aqueous organic pollutants: Performances and the key role of carbonyl groups in electron-transfer mechanism

Comparative study on the activation of peroxymonosulfate and peroxydisulfate by Ar plasma-etching CNTs for sulfamethoxazole degradation: Efficiency and mechanisms

Sulfamethoxazole (SMX), a widely utilized antibiotic, was continually detected in the environment, causing serious risks to aquatic ecology and water security. In this study, carbon nanotubes (CNTs) with abundant defects were developed by argon plasma-etching technology to enhance the activation of persulfate (PS, including peroxymonosulfate (PMS) and peroxydisulfate (PDS)) for SMX degradation while reducing environmental toxicity. Obviously, the increase of ID/IG value from 0.980 to 1.333 indicated that Ar plasma-etching successfully introduced rich defects into CNTs. Of note, Ar-90-CNT, whose Ar plasma-etching time was 90 min with optimum catalytic performance, exhibited a significant discrepancy between PMS activation and PDS activation. Interestingly, though the Ar-90-CNT/PDS system (kobs = 0.0332 min-1) was more efficient in SMX elimination than the Ar-90-CNT/PMS system (kobs = 0.0190 min-1), Ar plasma-etching treatment had no discernible enhancement in the catalytic efficiency of MWCNT for PDS activation. Then the discrepancy on activation mechanism between PMS and PDS was methodically investigated through quenching experiments, electron spin resonance (ESR), chemical probes, electrochemical measurements and theoretical calculations, and the findings unraveled that the created vacancy defects were the ruling active sites for the production of dominated singlet oxygen (1O2) in the Ar-90-CNT/PMS system to degrade SMX, while the electron transfer pathway (ETP), originated from PDS activation by the inherent edge defects, was the central pathway for SMX removal in the Ar-90-CNT/PDS system. Based on the toxicity test of Microcystis aeruginosa, the Ar-90-CNT/PDS system was more effective in alleviating environmental toxicity during SMX degradation. These findings not only provide insights into the discrepancy between PMS activation and PDS activation via carbon-based materials with controlled defects regulated by the plasma-etching strategy, but also efficiently degrade sulfonamide antibiotics and reduce the toxicity of their products.

Cyclodextrin-based metal-organic frameworks transforming drug delivery

Cyclodextrin-based metal-organic frameworks (CD-MOFs) are gaining traction in the realm of drug delivery due to their inherent versatility and potential to amplify drug efficacy, specificity, and safety. This article explores the predominant preparation techniques for CD-MOFs, encompassing methods like vapor diffusion, microwave-assisted, and ultrasound hydrothermal approaches. Native CD-MOFs present compelling advantages in drug delivery applications. They can enhance drug loading capacity, stability, solubility, and bioavailability by engaging in diverse interactions with drugs, including host-guest, hydrogen bonding, and electrostatic interactions. Beyond their inherent properties, CD-MOFs can be customized as drug carriers through two primary strategies: co-crystallization with functional components and surface post-modifications. These tailored modifications pave the way for controlled release manners. They allow for slow and sustained drug release, as well as responsive releases triggered by various factors such as pH levels, glutathione concentrations, or specific cations. Furthermore, CD-MOFs facilitate targeted delivery strategies, like pulmonary or laryngeal delivery, enhancing drug delivery precision. Overall, the adaptability and modifiability of CD-MOFs underscore their potential as a versatile platform for drug delivery, presenting tailored solutions that cater to diverse biomedical and industrial needs.

Efficient roxarsone degradation by low-dose peroxymonosulfate with the activation of recycling iron-base composite material: Critical role of electron transfer

Pollutant degradation via electron transfer based on advanced oxidation processes (AOPs) provides an economical and energy-efficient method for pollution control. In this study, an iron-rich waste, heating pad waste (HPW), was recycled as a raw material, and a strong magnetic catalyst (Fe-HPW) was synthesized at high temperature (900 °C). Results showed that in the constructed Fe-HPW/PMS system, effective roxarsone (ROX) degradation and TOC removal (72.54%) were achieved at a low-dose of oxidant (PMS, 0.05 mM) and catalyst (Fe-HPW, 0.05 g L-1), the ratio of PMS to ROX was only 2.5:1. In addition, the released inorganic arsenic was effectively removed from the solution. The analysis of the experimental results showed that ROX was effectively degraded by forming PMS/catalyst surface complexes (Fe-HPW-PMS*) to mediate electron transfer in the Fe-HPW/PMS system. Besides, this system performed effective ROX degradation over a wide pH range (pH=3-9) and showed high resistance to different water parameters. Overall, this study not only provides a new direction for the recycling application of HPW but also re-emphasizes the neglected nonradical pathway in advanced oxidation processes.

High-performance plastic-derived metal-free catalysts for organic pollutants degradation via Fenton-like reaction

The preparation of waste plastics-derived catalysts is an effective strategy for the waste reclamation. However, plastic-derived material is unsuitable for wastewater purification due to its small specific surface area (SSA) and inadequate active sites (such as N/O sites). Herein, we synthesized graphene-like nanosheets using g-C3N4 as the self-sacrificing soft template and plastic as the carbon precursor. Consequently, this strategy greatly promoted the efficiencies of the emerging organic pollutants degradation with the SSA and N content of the plastic-derived biochar increasing up to 1043.4 m2/g and 17.53 at.%, respectively. In detail, 100 % sulfadiazine (SD) removal could be achieved in 180 s via the activation of peroxymonosulfate (PMS) and the catalytic activity is far higher than previous research. Mechanism experiments corroborated that such a striking performance was attributed to the generation of SO4•-, O2•- and 1O2. Meanwhile, kinds of plastic precursors, even medical waste (i.e., masks, gauze, operating caps and degreasing cotton) were also applicable. And the practical application of the plastic-derived catalyst was further demonstrated by treating pollutants in a continuous flow mode with in situ fabricated membrane. This work provides valuable insights into waste plastics processing and water pollutants removal.

Efficient degradation of chlorpyrifos and intermediate in soil by a novel microwave induced advanced oxidation process: A two-stage reaction

The application of microwave/peroxymonosulfate (MW/PMS) in soil remediation has been limited by some shortages including low utilization efficiency of oxidants, low MW absorption capacity of soil particles and incomplete degradation of intermediate. In this study, heating pad waste (HPW) was added in the MW/PMS system to increase the ability of absorbing MW and degradation efficiency of toxic intermediate. A two-stage method for degradation of chlorpyrifos (CPF) and its intermediate 3,5,6-trichloro-2-pyridinol (TCP) by MW/PMS assisted with HPW was proposed. In the first stage, more than 90% of CPF was degraded within 15 min before the addition of HPW, and most of the CPF was converted into TCP through direct or indirect pathways under the action of 1O2. In the second stage, more than 70% of the generated TCP was rapidly degraded through SO4•- oxidation and electron transfer. The TCP was further degraded with the assistance of HPW through methylation, hydroxylation and dechlorination etc., and the toxicity of degradation products was decreased significantly. pH and soil organic matter had little influences on CPF and TCP degradation. Therefore, a new strategy for remediation of CPF contaminated-soil was provided based on MW/PMS technology and the concept of "treating waste with waste".

Carbonaceous Materials-Based Photothermal Process in Water Treatment: From Originals to Frontier Applications

The photothermal process has attracted considerable attention in water treatment due to its advantages of low energy consumption and high efficiency. In this respect, photothermal materials play a crucial role in the photothermal process. Particularly, carbonaceous materials have emerged as promising candidates for this process because of exceptional photothermal performance. While previous research on carbonaceous materials has primarily focused on photothermal evaporation and sterilization, there is now a growing interest in exploring the potential of photothermal effect-assisted advanced oxidation processes (AOPs). However, the underlying mechanism of the photothermal effect assisted by carbonaceous materials remains unclear. This review aims to provide a comprehensive review of the photothermal process of carbonaceous materials in water treatment. It begins by introducing the photothermal properties of carbonaceous materials, followed by a discussion on strategies for enhancing these properties. Then, the application of carbonaceous materials-based photothermal process for water treatment is summarized. This includes both direct photothermal processes such as photothermal evaporation and sterilization, as well as indirect photothermal processes that assisted AOPs. Meanwhile, various mechanisms assisted by the photothermal effect are summarized. Finally, the challenges and opportunities of using carbonaceous materials-based photothermal processes for water treatment are proposed.

Activation of peroxymonosulfate by biochar-supported Fe3O4 derived from oily sludge to enhance the oxidative degradation of tetracycline hydrochloride

Carbon materials used for catalysis in advanced oxidation processes tend to be obtained from cheap and readily available raw materials. We constructed a carbon material, OSC@Fe3O4, by loading Fe3O4 onto the pyrolyzed hazardous waste oily sludge. OSC@Fe3O4 was then used to activate peroxymonosulfate (PMS) for the removal of tetracycline hydrochloride (TTCH) from water. At 298 K, 0.2 g⋅L-1 of catalyst and 0.3 g⋅L-1 of PMS, the reaction rate constant of the OSC@I-2/PMS system reached 0.079 min-1, with a TTCH removal efficiency of 92.6%. The degradation efficiency of TTCH remained at 81% after five cycles. The specific surface area and pore volume of OSC@I-2 were 263.9 m2⋅g-1 and 0.42 cm3⋅g-1, respectively, which improved the porous structure of the carbon material and provided more active points, thus improving the catalytic performance. N and S were doped into the oily sludge carbon due to the presence of N- and S-containing compounds in the raw oily sludge. N and S doping led to more electron-rich sites with higher negative charges in OSC@I-2 and gave the oily sludge carbon a higher affinity to PMS, thereby promoting its ability to activate PMS. Sulfate radicals (SO4•‾) played a dominant role in the degradation of TTCH, with demethylation and the breaking of double bonds being a possible degradation pathway. A biotoxicity test showed that the microbial toxicity of the degradation intermediates was significantly reduced. This work provides a strategy for the application of PMS-based catalysts derived from waste carbon resources.

Singlet oxygen in the removal of organic pollutants: An updated review on the degradation pathways based on mass spectrometry and DFT calculations

The degradation of pollutants by a non-radical pathway involving singlet oxygen (1O2) is highly relevant in advanced oxidation processes. Photosensitizers, modified photocatalysts, and activated persulfates can generate highly selective 1O2 in the medium. The selective reaction of 1O2 with organic pollutants results in the evolution of different intermediate products. While these products can be identified using mass spectrometry (MS) techniques, predicting a proper degradation mechanism in a 1O2-based process is still challenging. Earlier studies utilized MS techniques in the identification of intermediate products and the mechanism was proposed with the support of theoretical calculations. Although some reviews have been reported on the generation of 1O2 and its environmental applications, a proper review of the degradation mechanism by 1O2 is not yet available. Hence, we reviewed the possible degradation pathways of organic contaminants in 1O2-mediated oxidation with the support of density functional theory (DFT). The Fukui function (FF, f-, f+, and f0), HOMO-LUMO energies, and Gibbs free energies obtained using DFT were used to identify the active site in the molecule and the degradation mechanism, respectively. Electrophilic addition, outer sphere type single electron transfer (SET), and addition to the hetero atoms are the key mechanisms involved in the degradation of organic contaminants by 1O2. Since environmental matrices contain several contaminants, it is difficult to experiment with all contaminants to identify their intermediate products. Therefore, the DFT studies are useful for predicting the intermediate compounds during the oxidative removal of the contaminants, especially for complex composition wastewater.

Lab-scale transport and activation of peroxydisulfate for phenanthrene degradation in soil: A comprehensive assessment of the remediation process, soil environment and microbial diversity

Electrokinetic transport followed by electrical resistance heating activation of peroxydisulfate is a novel in situ soil remediation method. However, the strategy of electrokinetic transport coupled with electrical resistance heating and the comprehensive evaluation of restored soil need to be further explored. In this study, a lab-scale simulation device for in situ electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate was constructed to monitor the transport and transfer of peroxydisulfate, target pollutants, and process parameters, and the physicochemical properties and bacterial community of treated soil were evaluated. The results showed that adding 10 wt% peroxydisulfate to both the anode and cathode resulted in the optimized transfer rate and cumulative concentration of peroxydisulfate under electrokinetics. After 8 h, the cumulative concentration of peroxydisulfate reached 66.15- 166.29 mmol L-1, which was attributed to the migration of a large amount of S2O82- from the cathode to the soil under electromigration. Additionally, the anodic interfacial electric potential was improved, which was more conducive to electroosmotic transport of peroxydisulfate from the anode chamber. By alternating electrokinetic transport and electrical resistance heating activation of peroxydisulfate for two cycles, the phenanthrene degradation efficiency in four evenly distributed wells between electrodes reached 75.4 %, 87.6 %, 92.3 %, and 94.4 %. With slight variations in soil morphology and structure, the electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate elevated the soil fertility index. The abundance and diversity of bacterial communities in treated soil recovered to above the original soil level after 15 days. Our findings may support the application of electrokinetic transport coupled with electrical resistance heating activation of peroxydisulfate as a promising green ecological technology for the in situ remediation of organic-contaminated soil.

A critical review on correlating active sites, oxidative species and degradation routes with persulfate-based antibiotics oxidation

At present, numerous heterogeneous catalysts have been synthesized to activate persulfate (PS) and produce various reactive species for antibiotic degradation from water. However, the systematic summary of the correlation among catalyst active sites, PS activation pathway and pollutant degradation has not been reported. This review summarized the effect of metal-based, carbon-based and metal-carbon composite catalysts on the degradation of antibiotics by activating PS. Metal and non-metal sites are conducive to inducing different oxidation pathways (SO₄^•-, ^•OH radical oxidation and ¹O₂ oxidation, mediated electron transfer, surface-bound reactive complexes and high-valent metal oxidation). SO₄^•- and ^•OH are easy to attack CH, S-N, CN bonds, CC double bonds and amino groups in antibiotics. ¹O₂ is more selective to the structure of the aniline ring and amino group, and also to attacking CS, CN and CH bonds. Surface-bound active species can cleave CC, SN, CS and CN bonds. Other non-radical pathways may also induce different antibiotic degradation routes due to differences in oxidation potential and electronic properties. This critical review clarified the functions of active sites in producing different reactive species for selective oxidation of antibiotics via featured pathways. The outcomes will provide valuable guidance of oriented-regulation of active sites in heterogeneous catalysts to produce on-demand reactive species toward high-efficiency removing antibiotics from water.

Significant roles of surface functional groups and Fe/Co redox reactions on peroxymonosulfate activation by hydrochar-supported cobalt ferrite for simultaneous degradation of monochlorobenzene and p-chloroaniline

CoFe₂O₄/hydrochar composites (FeCo@HC) were synthesized via a facile one-step hydrothermal method and utilized to activate peroxymonosulfate (PMS) for simultaneous degradation of monochlorobenzene (MCB) and p-chloroaniline (PCA). Additionally, the effects of humic acid, Cl^-, HCO₃^-, H₂PO₄^-, HPO₄^2- and water matrices were investigated and degradation pathways of MCB and PCA were proposed. The removal efficiencies of MCB and PCA were higher in FeCo@HC140-10/PMS system obtained under hydrothermal temperature of 140 °C than FeCo@HC180-10/PMS and FeCo@HC220-10/PMS systems obtained under higher temperatures. Radical species (i.e., SO₄^•-, •OH) and nonradical pathways (i.e., ¹O₂, Fe (IV)/Co (IV) and electron transfer through surface FeCo@HC140-10/PMS* complex) co-occurred in the FeCo@HC140-10/PMS system, while radical and nonradical pathways were dominant in degrading MCB and PCA respectively. The surface functional groups (i.e., C-OH and CO) and Fe/Co redox cycles played crucial roles in the PMS activation. MCB degradation was significantly inhibited in the mixed MCB/PCA solution over that in the single MCB solution, whereas PCA degradation was slightly promoted in the mixed MCB/PCA solution. These findings are significant for the provision of a low-cost and environmentally-benign synthesis of bimetal-hydrochar composites and more detailed understanding of the related mechanisms on PMS activation for simultaneous removal of the mixed contaminants in groundwater.

Degradation of organic pollutants from water by biochar-assisted advanced oxidation processes: Mechanisms and applications

Biochar has shown large potential in environmental remediation because of its low cost, large specific surface area, porosity, and high conductivity. Biochar-assisted advanced oxidation processes (BC-AOPs) have recently attracted increasing attention to the remediation of organic pollutants from water. However, the effects of biochar properties on catalytic performance need to be further explored. There are still controversial and knowledge gaps in the reaction mechanisms of BC-AOPs, and regeneration methods of biochar catalysts are lacking. Therefore, it is necessary to systematically review the latest research progress of BC-AOPs in the treatment of organic pollutants in water. In this review, first of all, the effects of biochar properties on catalytic activity are summarized. The biochar properties can be optimized by changing the feedstocks, preparation conditions, and modification methods. Secondly, the catalytic active sites and degradation mechanisms are explored in different BC-AOPs. Different influencing factors on the degradation process are analyzed. Then, the applications of BC-AOPs in environmental remediation and regeneration methods of different biochar catalysts are summarized. Finally, the development prospects and challenges of biochar catalysts in environmental remediation are put forward, and some suggestions for future development are proposed.

Computational study on persulfate activation by two-dimensional carbon materials with various nitrogen proportions for carbamazepine oxidation in wastewater: The essential role of graphitic N atoms

Two-dimensional carbon materials with various N atom proportions (2D-CNMs) are constructed to clarify the optimal catalyst for carbamazepine (CBZ) oxidation and the inner mechanism for persulfate-based advanced oxidation processes (P-AOPs). Results show that peroxydisulfate (PDS) can be activated by all 2D-CNMs with the order of C₃N > C₇₁N > graphene > C₂N > CN, while C₃N is the only catalyst for peroxymonosulfate (PMS) activation. The C₃N with the maximum graphitic N can activate PDS and PMS in a wide temperature range at any pH, and demonstrates the optimal CBZ oxidation performance. Notably, the graphitic N atoms promote P-AOPs from five aspects: (i) electron structure, (ii) electrical conductivity, (iii) electron transfer from persulfate to catalysts, (iv) electron jump of co-system before and after activation, (v) interaction between catalyst and persulfate. The most vigorous activity of C₃N is attributed to the greatest number of graphitic N. This work clarifies the essential role of graphitic N atoms with implications for the catalyst design, and facilitates the environmental applications of P-AOPs for micropollutant abatement.

Porous biomaterials for tissue engineering: a review

The field of biomaterials has grown rapidly over the past decades. Within this field, porous biomaterials have played a remarkable role in: (i) enabling the manufacture of complex three-dimensional structures; (ii) recreating mechanical properties close to those of the host tissues; (iii) facilitating interconnected structures for the transport of macromolecules and cells; and (iv) behaving as biocompatible inserts, tailored to either interact or not with the host body. This review outlines a brief history of the development of biomaterials, before discussing current materials proposed for use as porous biomaterials and exploring the state-of-the-art in their manufacture. The wide clinical applications of these materials are extensively discussed, drawing on specific examples of how the porous features of such biomaterials impact their behaviours, as well as the advantages and challenges faced, for each class of the materials.

Removal of Gaseous Volatile Organic Compounds by a Multiwalled Carbon Nanotubes/Peroxymonosulfate Wet Scrubber

In this study, a wet scrubber coupled with a persulfate-based advanced oxidation process [carbocatalysts/peroxymonosulfate (PMS)] was demonstrated to efficiently remove gaseous volatile organic compounds (VOCs). The removal efficiency of a representative VOC, styrene, was stable at above 98%, and an average mineralization rate was achieved at 76% during 2 h. The removal efficiency of the carbocatalysts/PMS wet scrubber for styrene was much higher than that of pure water, carbocatalysts/water, or PMS/water systems. Quenching experiments, electron spin resonance spectroscopy, in-situ Raman spectroscopy and density functional theory (DFT) calculations indicated that singlet oxygen (¹O₂) and oxidative complexes are the main reactive oxygen species and that both contributed to styrene removal. In particular, carbonyl groups (C═O) in the carbocatalyst were found to be the active sites for activating PMS during styrene oxidation. The role of ¹O₂ was discovered to be benzene ring breaking and a possible non-radical oxidation pathway of styrene was proposed based on time-of-flight mass spectroscopy which was further verified by DFT calculations. In particular, the electron transfer process of multi world carbon nanotubes-PMS* in styrene oxidation was further studied in-depth by experiments and DFT calculations. The unstable vinyl on styrene was simultaneously degraded by the oxidative complexes and ¹O₂ into benzene, and finally oxidized by ¹O₂ into H₂O and CO₂. This study provides an effective method for VOC removal and clearly illustrates the complete degradation mechanism of styrene in a nonradical PMS-based process by a wet scrubber.

Utilization of methylene blue-adsorbed halloysite after carbonization to activate peroxymonosulfate degrading phenol: Performance and mechanism

In this study, a new low-cost carbon-based material was prepared via the carbonization of methylene blue adsorbed halloysite (CMH) at different temperatures in a nitrogen atmosphere, which was named CMH-T (T-Temperature). The performance of CMH-T was explored and the effects of initial pH values, catalyst dosage, phenol (PE) concentrations, peroxymonosulfate (PMS) concentrations, and water background compounds on PE degradation were investigated systematically. The results indicated that CMH800 exhibited the best performance to activate PMS for degrading PE. Specifically, 92% PE was degraded within 30 min with a constant rate (k_obs) of 0.1186 min^-1 in the CMH800/PMS system. Furthermore, CMH800 was efficient over a wide pH range (pH 3-9) and showed a slight inhibition to inorganic anions. Quenching experiments, electron spin resonance (ESR) analysis, and electrochemical analysis confirmed that PE was degraded through non-radical pathways dominated by single oxygen (¹O₂) and mediated electron transfer processes in the CMH800/PMS system. In addition, the predicted toxicity of intermediates through ECOSAR software based on QSAR (Quantitative Structure - Activity Relationship) model indicated that most of the intermediates had a low risk to water environment. Therefore, the CMH800 has a good potential for wastewater treatment applications.

Peroxymonosulfate enhanced photoelectrocatalytic oxidation of organic contaminants and simultaneously cathodic recycling of silver

Degradation of organic contaminants with simultaneous recycling of Ag⁺ from silver-containing organic wastewater such as photographic effluents is desired. Although photoelectrocatalysis (PEC) technology is a good candidate for this type of wastewater, its reaction kinetics still needs to be improved. Herein, peroxymonosulfate (PMS) was employed to enhance the PEC kinetics for oxidation of phenol (PhOH) at the anode and reduction of Ag⁺ at the cathode. The degradation efficiency of phenol (PhOH, 0.1 mmol/L) was increased from 42.8% to 96.9% by adding 5 mmol/L PMS at a potential of 0.25 V. Meanwhile, the Ag (by wt%) deposited on the cathode was 28.1% (Ag₂O) in PEC process, while that of Ag (by wt%) was 69.7% (Ag⁰) by adding PMS. According to the electrochemistry analysis, PMS, as photoelectrons acceptor, enhances the separation efficiency of charges and the direct h⁺ oxidation of PhOH at the photoanode. Meantime, the increasing cathode potential avoided H₂ evolution and strongly alkaline at the surface of cathode, thus enabling the deposition of Ag⁺ in the form of metallic silver with the help of PMS. In addition, PMS combined with PEC process was effective in treating photographic effluents.

WSe2/g-C3N4 for an In Situ Photocatalytic Fenton-like System in Phenol Degradation

An in situ photo-Fenton system can continuously generate H₂O₂ by photocatalysis, activating H₂O₂ in situ to form strong oxidizing ·OH radicals and degrading organic pollutants. A WSe₂/g-C₃N₄ composite catalyst with WSe₂ as a co-catalyst was successfully synthesized in this work and used for in situ photo-Fenton oxidation. The WSe₂/g-C₃N₄ composite with 7% loading of WSe₂ (CNW2) has H₂O₂ production of 35.04 μmol/L, which is fourteen times higher than pure g-C₃N₄. The degradation efficiency of CNW2 for phenol reached 67%. By constructing an in situ Fenton-system, the phenol degradation rate could be further enhanced to 90%. WSe₂ can enhance the catalytic activity of CNW2 by increasing electron mobility and inhibiting the recombination of photogenerated electron-hole pairs. Moreover, the addition of Fe²⁺ activates the generated H₂O₂, thus increasing the amount of strong oxidative ·OH radicals for the degradation of phenol. Overall, CNW2 is a promising novel material with a high H₂O₂ yield and can directly degrade organic pollutants using an in situ photo-Fenton reaction.

A Mini Review on Persulfate Activation by Sustainable Biochar for the Removal of Antibiotics

Antibiotic contamination in water bodies poses ecological risks to aquatic organisms and humans and is a global environmental issue. Persulfate-based advanced oxidation processes (PS-AOPs) are efficient for the removal of antibiotics. Sustainable biochar materials have emerged as potential candidates as persulfates (Peroxymonosulfate (PMS) and Peroxydisulfate (PDS)) activation catalysts to degrade antibiotics. In this review, the feasibility of pristine biochar and modified biochar (non-metal heteroatom-doped biochar and metal-loaded biochar) for the removal of antibiotics in PS-AOPs is evaluated through a critical analysis of recent research. The removal performances of biochar materials, the underlying mechanisms, and active sites involved in the reactions are studied. Lastly, sustainability considerations for future biochar research, including Sustainable Development Goals, technical feasibility, toxicity assessment, economic and life cycle assessment, are discussed to promote the large-scale application of biochar/PS technology. This is in line with the global trends in ensuring sustainable production.

Carbon nanotube-based materials for persulfate activation to degrade organic contaminants: Properties, mechanisms and modification insights

Removal of harmful organic matters from environment has great environmental significance. Carbon nanotube (CNT) materials and their composites have been demonstrated to possess excellent catalytic activity towards persulfate (PS) activation for the degradation of organic contaminants. Herein, detailed information concerning the function, modification methods and relevant mechanisms of CNT in persulfate-based advanced oxidation processes (PS-AOPs) for organic pollutant elimination has been reviewed. The activation mechanism of PS by CNT might include radical and nonradical pathways and their synergistic effects. The common strategies to improve the stability and catalytic capability of CNT-based materials have also been put forward. Furthermore, their practical application potential compared with other catalysts has been described. Finally, the challenges faced by CNT in practical application are clearly highlighted. This review should be of value in promoting the research of PS activation by CNT-based materials for degradation of organic pollutants and the corresponding practical applications.

Waste preserved wood derived biochar catalyst for promoted peroxymonosulfate activation towards bisphenol A degradation with low metal ion release: The insight into the mechanisms

The rational disposal of waste preserved wood is of great significance since its embedded metals (Cu, As, and Cr) pose potential threat to environment and human health. In this study, a biochar catalyst derived from waste preserved wood (PWB) was prepared for the degradation of bisphenol A (BPA) via peroxymonosulfate (PMS) activation. The PWB exhibited prominent catalytic degradation capability towards BPA compared with common wood derived biochar (CWB). Further tests and analysis elucidated that both radical species (OH) and non-radical species (¹O₂) were generated by the PWB/PMS system, whereas only ¹O₂ was detected in CWB/PMS system. Specifically, the metal compounds, especially metallic Cu in the PWB activated PMS via radical pathway, and the CO groups in the biochar generated the non-radical pathway, the coexistence of which resulted in higher BPA degradation rate in PWB/PMS system. It was also demonstrated that the heavy metal ion leaching (As and Cr) in PWB/PMS system was negligible. Furthermore, the biochar could effectively inhibit the leakage of oxidized Cu ions. This study provides a novel approach to prepare high-efficient carbocatalysts for organic pollutant degradation in water, which also enables the waste preserved wood with an environmental nondestructive mode of dispatch.

The potential of green biochar generated from biogas residue as a heterogeneous persulfate activator and its non-radical degradation pathways: Adsorption and degradation of tetracycline

Advanced oxidation aided by sulfate radicals (SO₄^-) is an effective option for the treatment of refractory pollutants from aqueous solutions. In this work, a metal-free biochar catalyst was prepared using pyrolyzed biogas residue as the raw material. The biogas residue carbon (BRC) obtained at 800 °C showed excellent catalytic activity and adsorption capacity for the removal of tetracycline (TC) with 97.9% of removal efficiency. Such performance is accounted for by the rich pores and accelerated electron transformability conferred by its defect structure with the crucial role of pyrolysis temperature in regulating catalyst properties. The BRC-800/peroxymonosulfate (PMS) system worked predominantly through non-radical pathways with high stability/recyclability without being interfered by organic/inorganic compounds in an actual water environment. The exceelent removal performance is also supported by the kinetic reaction rate of the BRC-800/PMS system as estimated to be 0.03017 min^-1. This work provides a simple and effective path for modifying biogas residue waste for versatile applications.

Nitrogen-doped carbon nanotubes enhanced Fenton chemistry: Role of near-free iron(III) for sustainable iron(III)/iron(II) cycles

The sluggish kinetics of Fe(II) recovery strongly impedes the scientific progress of Fenton reaction (Fe(II)/H₂O₂) towards practical application. Here, we propose a novel mechanism that metal-free nitrogen-doped carbon nanotubes (NCNT) can enhance Fenton chemistry with H₂O₂ as electron donors by elevating the oxidation potential of Fe(III). NCNT remarkably promotes the circulation of Fe(III)/Fe(II) to produce hydroxyl radical (^•OH) with excellent stability for multiple usages (more than 10 cycles) in the NCNT/Fe(III)/H₂O₂ system. Although carbonyl on NCNT can act as the electron supplier for Fe(III) reduction, the behavior of NCNT is distinct from common reductants such as hydroxylamine and boron. Electrochemical analysis and density functional theory calculation unveil that nitrogen sites of NCNT can weakly bind with Fe(III) to elevate the oxidation potential of Fe(III) (named near-free Fe(III), primarily FeOH²⁺) at pH ranging from 2.0 to 4.0. Without inputs of external stimulations or electron sacrificers, near-free Fe(III) can promote H₂O₂ induced reduction of Fe(III) to initiate Fenton chain reactions for long-lasting generation of ^•OH. To our delight, it is a common property of N-doped carbon materials (e.g., graphene, carbon nanofibers, and acetylene black), our research thus provides a novel, sustainable, and green strategy for promoting Fenton chemistry.

Metal-organic framework-derived magnetic carbon for efficient decontamination of organic pollutants via periodate activation: Surface atomic structure and mechanistic considerations

Practical implementation of periodate-based advanced oxidation processes for environmental remediation largely relies on the development of cost-effective and high-performance activators. Surface atomic engineering toward these activators is desirable but it remains challenging to realize improved activation properties. Here, a surface atomic engineering strategy used to obtain a novel hybrid activator, namely cobalt-coordinated nitrogen-doped graphitic carbon nanosheet-enwrapped cobalt nanoparticles (denoted as Co@NC-rGO), from a sandwich-architectured metal-organic framework/graphene oxide composite is reported. This activator exhibits prominent periodate activation properties toward pollutant degradation, surpassing previously reported transition-metal-based activators. Importantly, the activator shows good stability, magnetic reusability, and the potential for application in a complex water matrix. Density functional theory modeling implies that the strong activation capability of Co@NC-rGO is related to its surface atomic structure for which the embedded cobalt nanoparticles with abundant interfacial Co-N coordinations display modified electronic configurations on the active centers and benefit periodate adsorption. Quenching experiments and electrochemical measurements showed that the system could oxidize organics through a dominant nonradical pathway. Additionally, a lower concentration of cobalt leaching was observed for the Co@NC-rGO/periodate system than for its Co@NC-rGO/persulfate counterpart. Our work provides a pathway toward engineering surface atomic structures in hybrid activators for efficient periodate activation.

Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Tetracycline (TC) is a commonly used antibiotic that has gained wide spread notoriety owing to its high environmental risks. In this study, rich carbonyl-modified carbon-coated Fe⁰ was obtained by pyrolysis of MIL-100(Fe) in an Ar atmosphere, and used to activate peroxymonosulfate (PMS) for the degradation of tetracycline in water. The roles of Fe⁰, carbon and surface carbonyl on PMS activation were investigated. Fe⁰ continuously activated PMS, acted as a sustained-release source of Fe²⁺, and could effectively activate PMS to produce SO₄^•-, O₂^•- and •OH. Carbon was found to do responsible for electron transportation during the activation of PMS and slow down the oxidation of Fe⁰. The carbonyl group on the carbon surface layer was the active site of ¹O₂, which explains the enhanced performance for TC degradation. When Ca = 0.1 g/L and C₀ = 0.4 mM, TC degradation rate reached 96%, which was attributed to the synergistic effect of radicals (i.e., SO₄^•-, O₂^•-, •OH) and non-radical (i.e., ¹O₂). Finally, the degradation pathway was proposed by combining density functional theory (DFT) calculations with liquid chromatography-mass spectrometry (LC-MS), toxicities of the intermediate products were also evaluated. All results show that carbonyl-modified carbon-coated Fe⁰ possesses promising capacity for the removal of antibiotics from water.

Mechanism study of CoS2/Fe(III)/peroxymonosulfate catalysis system: The vital role of sulfur vacancies

Peroxymonosulfate (PMS) activation methods have attractive advantages in advanced oxidation process (AOPs) due to their powerful ability of directly or indirectly generating various reactive oxygen species (ROS). Herein, trace amount of Fe(III) ions were added into the commercial-CoS₂/PMS system to improve the CoS₂/PMS decomposition for organics removal. The organics removal efficiency could reach >90% towards methylene blue (MB), diclofenac sodium (DCF), sulfamethoxazole (SMX) and bisphenol A (BPA) in the CoS₂/Fe(III)/PMS system, with the kinetic apparent rate constant k_obs of 0.141, 0.206, 0.247 and 0.091 min^-1, respectively. The synergistic effect between Fe(III) ions and sulfur-vacancies on CoS₂ for PMS degradation were revealed for the first time in cobalt sulfides/PMS system. Quenching experiments and ESR analysis proved that ¹O₂ was the major ROS and was produced mainly by the hydrolysis of SO₅^•-. Besides, the high degradation efficiency was obtained by the contribution of SO₄^•- and ^•OH. Electron spin-resonance spectroscopy (ESR), cyclic voltammetry (CV) and Raman spectrum data revealed that the addition of Fe(III) ions could optimize the intensity of sulfur vacancies on the CoS₂ surface, which hindered the PMS reduction ability of Co(II), but accelerated the PMS oxidation to form ¹O₂. The degradation path of MB was analyzed by liquid chromatograph-mass spectrometer (LC-MS). The mechanism studies speculated that the sulfur vacancies of CoS₂ provided the binding sites for Fe(III) ions with Co(II), which facilitated the PMS activation by Co(III).

Persulfate adsorption and activation by carbon structure defects provided new insights into ofloxacin degradation by biochar

Cellulose and lignin derived biochars with significant differences in persistent free radicals (PFRs), oxygen-containing functional groups, and defective structure were prepared to explore the mechanism of biochar mediated persulfate (PS) activation. EPR spin trapping and quenching technique coupled with degradation experiments confirmed that the defective structures could activate PS to generate superoxide anions (O₂^•-), which was converted to singlet oxygen (¹O₂), especially in the acidic condition. ¹O₂ dominated the degradation of ofloxacin (OFL, a fluoroquinolone antibiotic). An improved iodometric measurement was applied for direct quantification of adsorbed PS on biochar. The amounts of adsorbed PS were consistent with the degradation of OFL and the measured electric current during the reaction indicated that PS adsorption was a prerequisite for PS activation, which may be neglected in previous studies. The results of this study highlighted the key roles of defective structure and adsorption of PS on biochar for the activation of PS.

Tunable active sites on biogas digestate derived biochar for sulfanilamide degradation by peroxymonosulfate activation

Conversion of digestate into biochar-based catalysts is an effective strategy for disposal and resource utilization. The active sites on biochar correlated with reactive species formation in peroxymonosulfate (PMS) system directly. Clarifying the structure-performance relationship of digestate derived biochar in PMS system was essential for decomposition of contaminants. Herein, dairy manure digestate derived biochar (DMDB) was prepared for PMS activation and sulfamethoxazole (SMX) degradation. The higher pyrolysis temperature could promote effective sites generation. Especially, the DMDB-800 catalyst exhibited excellent performance for PMS activation, achieving 90.2% degradation of SMX within 60 min. Based on the correlation analysis between log (k) values and active sites, defects, graphite N and CO were identified as dominant sites for PMS activation. The ¹O₂ oxidation and surface electron transfer were critical routes for SMX degradation. Besides, the degradation pathways of SMX were proposed according to DFT calculations and intermediates determination. The cleavage of the sulfonamide bond, hydroxylation of the benzene ring and oxidation of the amino group mainly occurred during SMX degradation. Overall, this study provides deep insights into the enhanced mechanism of tunable active sites on DMDBs for PMS activation, boosting the application of digestate biochar for water treatment in advanced oxidation systems.

Correlation of Active Sites to Generated Reactive Species and Degradation Routes of Organics in Peroxymonosulfate Activation by Co-Loaded Carbon

Peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) as an efficient strategy for organic degradation are highly dependent on catalyst design and structured active sites. However, the identification of the active sites and their relationship with reaction mechanisms for organic degradation are not fully understood for a composite catalyst due to the complex structure. Herein, we developed a family of Co encapsulated in N-doped carbons (Co-PCN) with tailored types and contents of active sites via manipulated pyrolysis for PMS activation and ciprofloxacin (CIP) degradation, focusing on the correlation of active sites to generated reactive species and degradation routes of organics. The structure-function relationships between the different active sites in Co-PCN catalysts and reactive oxygen species (ROS), as well as bond breaking position of CIP, were revealed through regression analysis and density functional theory calculation. Co-N_x, O-C═O, C═O, graphitic N, and defects in Co-PCN stimulate the generation of ¹O₂ for oxidizing the C-C bond in the piperazine ring of CIP into C═O. The substitution of F by OH and hydroxylation of the piperazine ring might be induced by SO₄^•- and ^•OH, whose formation was affected by C-O, Co(0), Co-N_x, graphitic N, and defects. The findings provided new insights into reaction mechanisms in PMS-AOP systems and rational design of catalysts for ROS-oriented degradation of pollutants.

Activation of peroxydisulfate by carbon nanotube for the degradation of 2,4-dichlorophenol: Contributions of surface-bound radicals and direct electron transfer

Carbon materials have been used to activate peroxydisulfate (PDS) for the degradation of organic pollutants. The mechanism involved, especially whether radicals are formed in these processes, is still under debate. In this research, multi-walled carbon nanotube (MWCNT) was employed to activate PDS for the removal of 2,4-dichlorophenol (2,4-DCP). The effects of solution pH, PDS concentration, 2,4-DCP concentration, and MWCNT loading on the degradation of 2,4-DCP were investigated. The mechanism was explored via radical scavenging experiments, electron paramagnetic resonance (EPR) and MWCNT surface characterization. The results showed that the rate of 2,4-DCP degradation increased with the increasing solution pH, PDS concentration and MWCNT loading. The presence of OH and SO₄^- signals in EPR studies, no inhibitory effect in radical scavenging experiments, and the chlorination of MWCNT observed by X-ray photoelectron spectroscopy (XPS) suggested that surface reactions involving both surface-bound radicals and direct electron transfer were responsible for 2,4-DCP degradation. Reusability tests showed that the surface sites responsible for surface-bound radical formation were poisoned after PDS activation, while those responsible for direct electron transfer remained active after five cycles. This research provided the first in-depth insights for the dual roles of MWCNT in the PDS activation process.

Novel coagulation waste-based Fe-containing carbonaceous catalyst as peroxymonosulfate activator for pollutants degradation: Role of ROS and electron transfer pathway

A facile one-step pyrolysis method was employed to prepare an iron containing carbonaceous catalyst using coagulation waste (CW) from paper mill. The catalyst (noted as PMCW) was used to activate peroxymonosulfate (PMS) for decomposition of Reactive Red 2 (RR2). The degradation mechanism was analyzed by reactive oxygen species (ROS) scavenging experiments, electron spin resonance spectroscopy, electrochemical measurements, selective deactivation of the functional groups on the catalyst surface, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. Results showed that, besides ROS (^•OH, SO₄^•- and ¹O₂), electron transfer pathways induced by -OH functional groups and the π-π* system are involved in the degradation mechanism of RR2. Concerning different decomposition pathways, seven intermediates were identified, and three important steps, including attack on the azo group, cleaving the N9-C10 bond, and opening the naphthalene ring, were deduced via application and analysis of quadrupole time-of-flight liquid chromatography/mass spectrometry (QTOF LC/MS) and density functional theory (DFT) calculations based on Fukui indices and electrostatic potential (ESP) distributions. This work not only provides a novel facile recycling strategy of industrial waste from paper manufacturing to good carbonaceous catalysts but also deepens the understanding of the mechanisms of PMS activation with carbonaceous materials.