Heavy metal pollution in coastal wetlands: A systematic review of studies globally over the past three decades

Mercury contamination is an invisible threat to declining migratory shorebirds along the East Asian-Australasian Flyway

Exposure to pollutants is a potentially crucial but overlooked driver of population declines in shorebirds along the East Asian-Australasian Flyway. We combined knowledge of moult strategy and life history with a standardised sampling protocol to assess mercury (Hg) contamination in 984 individuals across 33 migratory shorebird species on an intercontinental scale. Over one-third of the samples exceeded toxicity benchmarks. Feather Hg was best explained by moulting region, while habitat preference (coastal obligate vs. non-coastal obligate), the proportion of invertebrates in the diet and foraging stratum (foraging mostly on the surface vs. at depth) also contributed, but were less pronounced. Feather Hg was substantially higher in South China (Mai Po and Leizhou), Australia and the Yellow Sea than in temperate and Arctic breeding ranges. Non-coastal obligate species (Tringa genus) frequently encountered in freshwater habitats were at the highest risk. It is important to continue and expand biomonitoring research to assess how other pollutants might impact shorebirds.

Green synthesis of nZVI-modified biochar significantly enhanced the removal of Cr(VI) from aqueous solution

Water contamination by hexavalent chromium (Cr(VI)) seriously jeopardizes human health, which is a pressing environmental concern. Biochar-loaded green-synthesized nZVI, as a green and environmentally friendly material, can efficiently reduce Cr(VI) to Cr(III) while removing Cr(VI) from water. Therefore, in this study, an efficient green-modified biochar material (TP-nZVI/BC) was successfully prepared using tea polyphenol (TP) and sludge biochar (BC) using a low-cost and environmentally friendly green synthesis method. The preparation conditions of TP-nZVI/BC were optimized using response surface methodology (RSM), revealing that the dosage of tea polyphenols plays a crucial role in the removal performance (R2 = 1271.09), followed by reaction time and temperature. The quadratic regression model proved accurate. The optimal preparation conditions are as follows: tea polyphenols (TP) dosage at 48 g/L, reaction temperature at 75 ℃, and a reaction time of 3 h. TP-nZVI/BC removed Cr(VI) from water at a rate 7.6 times greater than BC. The pseudo-second-order kinetic model (R2 = 0.987) accurately describes the adsorption process, suggesting that chemical adsorption predominantly controls the removal process. The adsorption of Cr(VI) by TP-nZVI/BC can be well described by the Langmuir model, and the maximum adsorption capacity reached 105.65 mg/g. FTIR and XPS analyses before and after adsorption demonstrate that nZVI plays a crucial role in the reduction process of Cr(VI), and the synergistic effects of surface adsorption, reduction, and co-precipitation enhance Cr(VI) removal. In summary, using green-modified biochar for Cr(VI) removal is a feasible and promising method with significant potential.

Risk assessment of trace metals and polycyclic aromatic hydrocarbons in seawater of typical bays in the Bohai Sea

The ecological risks of trace metals (Cu, Zn, As, Cd, Pb, and Hg) and PAHs in seawater from three typical bays of the Bohai Sea (the Liaodong Bay, Bohai Bay, and Laizhou Bay) were comprehensively assessed by recompiling 637 sites. Results highlighted that scrutiny should be given to the ecological risks of Cu (3.80 μg/L) in the Bohai Bay and Hg (0.23 μg/L) in the Laizhou Bay. Conversely, the Liaodong Bay exhibited negligible ecological risks related to trace metals. The risks of ΣPAHs in the Liaodong Bay, Bohai Bay, and Laizhou Bay were moderate, with mean concentrations of 368.16 ng/L, 731.93 ng/L, and 187.58 ng/L, respectively. The source allocation of trace metals and PAHs required consideration of spatial variability and anthropogenic factors, which greatly affected the distribution and composition of these pollutants. The combined ecological risks in the Bohai Bay (6.80 %) and Laizhou Bay (5.43 %) deserved more attention.

Ecological and health risk assessment of heavy metals in agricultural soils from northern China

Soil pollution by heavy metals can cause continuing damage to ecosystems and the human body. In this study, we collected nine fresh topsoil samples and 18 maize samples (including nine leaf samples and nine corn samples) from agricultural soils in the Baiyin mining areas. The results showed that the order of heavy metal concentrations (mg/kg) in agricultural soils was as follows: Zn (377.40) > Pb (125.06) > Cu (75.06) > Ni (28.29) > Cd (5.46) > Hg (0.37). Cd, Cu, Zn, and Pb exceeded the Chinese risk limit for agricultural soil pollution. The average the pollution load index (4.39) was greater than 3, indicating a heavy contamination level. The element that contributed the most to contamination and high ecological risk in soil was Cd. Principal component analysis (PCA) and Pearson's correlation analysis indicated that the sources of Ni, Cd, Cu, and Zn in the soil were primarily mixed, involving both industrial and agricultural activities, whereas the sources of Hg and Pb included both industrial and transportation activities. Adults and children are not likely to experience non-carcinogenic impacts from the soil in this region. Nonetheless, it was important to be aware of the elevated cancer risk presented by Cd, Pb, and especially Ni. The exceedance rates of Cd and Pb in corn were 66.67% and 33.3%, respectively. The results of this research provide data to improve soil protection, human health monitoring, and crop management in the Baiyin district.

A first-principles investigation of Cr adsorption on C8 and B4N4 nanocages in aqueous mediums

Heavy metal removal from polluted environments is one of the vital research areas for better and healthier living. In this research, C8 and B4N4 nanocage-like quantum dots are investigated for heavy metal (Cr) removal applications via density functional theory calculations. The adsorption of up to two Cr atoms has been studied in both air and a water medium. The adsorption of Cr atoms results in significant structural deformation of the adsorbents with a high adsorption energy of -8.74 and -5.77 eV for C8 and B4N4 nanostructures, respectively, which is further increased with an increasing number of Cr atoms. All adsorbents and complex structures showed real vibrational frequencies. Mulliken charge and electrostatic potential analysis reveal a significant charge transfer between adsorbate-adsorbent. The adsorption process causes a decrease in the energy gap of the adsorbents. All the reactions in this study were spontaneous and thermodynamically ordered. QTAIM analysis verifies that the interactions of the adsorbents with Cr atoms are strong partial covalent. The study's findings make C8 and B4N4 nanostructures potential candidates for Cr-detection and removal applications.

Heavy metal pollution in the aquatic environment: efficient and low-cost removal approaches to eliminate their toxicity: a review

Heavy metal contamination of water sources has emerged as a major global environmental concern, threatening both aquatic ecosystems and human health. Heavy metal pollution in the aquatic environment is on the rise due to industrialization, climate change, and urbanization. Sources of pollution include mining waste, landfill leachates, municipal and industrial wastewater, urban runoff, and natural phenomena such as volcanic eruptions, weathering, and rock abrasion. Heavy metal ions are toxic, potentially carcinogenic, and can bioaccumulate in biological systems. Heavy metals can cause harm to various organs, including the neurological system, liver, lungs, kidneys, stomach, skin, and reproductive systems, even at low exposure levels. Efforts to find efficient methods to remove heavy metals from wastewater have increased in recent years. Although some approaches can effectively remove heavy metal contaminants, their high preparation and usage costs may limit their practical applications. Many review articles have been published on the toxicity and treatment methods for removing heavy metals from wastewater. This review focuses on the main sources of heavy metal pollution, their biological and chemical transformation, toxicological impacts on the environment, and harmful effects on the ecosystem. It also examines recent advances in cost-effective and efficient techniques for removing heavy metals from wastewater, such as physicochemical adsorption using biochar and natural zeolite ion exchangers, as well as decomposition of heavy metal complexes through advanced oxidation processes (AOPs). Finally, the advantages, practical applications, and future potential of these techniques are discussed, along with any challenges and limitations that must be considered.

Untreated Opuntia ficus indica for the Efficient Adsorption of Ni(II), Pb(II), Cu(II) and Cd(II) Ions from Water

The raw cladode of Opuntia ficus indica (OFI) was evaluated as a sustainable biosorbent for the removal of heavy metals (Ni, Pb, Cu, and Cd) from aqueous solutions. The functional groups of OFI were identified by employing DRIFT-FTIR and CP-MAS-NMR techniques before and after contact with the ions in an aqueous media, showing a rearrangement of the biomass structure due to the complexation between the metal and the functional groups. The adsorption process was studied in both single- and multi-component systems under batch conditions at different pHs (4.0, 5.0, and 6.0), different metal concentrations, and different biomass amounts. The results show that the raw OFI had a removal capacity at room temperature of over 80% for all metals studied after only 30 min of contact time, indicating a rapid adsorption process. Biosorption kinetics were successfully fitted by the pseudo-second-order equation, while Freundlich correctly modelled the biosorption data at equilibrium. The results of this work highlight the potential use of the untreated cladode of OFI as an economical and environmentally friendly biosorbent for the removal of heavy metals from the contaminated aqueous solution.

Economic and socioecological perspectives of urban wetland loss and processes: a study from literatures

Existing literatures across the world highlighted the causes and rate of wetland loss; however, so far, no researches tried to analyze how these are guided by the socioeconomic and ecological conditions. The current review work wished to explore how economic and socioecological perspectives could control the rate and drivers of urban wetland loss. Through meta-analysis, this study also intended to explore the changing polarity in research publication and collaborative research. Total 287 original research articles indicating the rates and drivers of wetland loss from 1990 to June 2022 for the first objective and 1500 articles focusing wetland researches from Dimensions AI database for the last objective were taken.Results clearly revealed that the rate of urban wetland loss varies from 0.03 to 3.13% annually, and three main drivers like built-up, agricultural expansions, pollution were identified all across the world. Loss rate was found maximum in the developing and least developed countries. Pollution, built-up expansion, and agriculture expansion, respectively, in developed, developing, and least developed nations were identified as the most dominant drivers of urban wetland loss. Linking loss rate and drivers with socioecological and economic perspectives revealed that human development index (HDI), ecological performance index (EPI), sustainable development goal index (SDGI), and social progress index (SPI) is negatively associated with the rate of urban wetland loss. Contrarily, a poverty rate encouraged higher rate of loss. This study articulated that improving these socioecological and economic conditions could help wetland conservation and restoration to achieve SDGs.

Antimony and naphthalene can be simultaneously leached from a combined contaminated soil using carboxymethyl-β-cyclodextrin as a biodegradable eluant

In this study, we have investigated the removal efficiency of antimony (Sb) and naphthalene (Nap) from a combined contaminated soil by carboxymethyl-β-cyclodextrin (CMCD) leaching and reveal its remediation mechanisms by FTIR and ¹H NMR analyses. The results show that the highest removal efficiencies of Sb and Nap were 94.82% and 93.59%, respectively, with a CMCD concentration of 15 g L^-1 at a pH of 4 and a leaching rate of 2.00 mL min^-1 over an interval-time of 12 h. The breakthrough curves show that CMCD had a stronger inclusion capacity of Nap than Sb, and Sb could enhance the adsorption capacity of Nap, while Nap weakened the adsorption of Sb during CMCD leaching. Furthermore, the FTIR analysis suggests that the removal of Sb from combined contaminated soil involved complexation with the carboxyl and hydroxyl groups on CMCD, and the NMR analysis suggests that the inclusion of Nap occurred. These results indicate that CMCD is a good eluant for remediating soil contaminated by a combination of heavy metals and polycyclic aromatic hydrocarbons (PAHs), and its remediation mechanisms depend on the complexation reactions between the surface functional groups and inclusion reactions in the internal cavities.

Effects of α-Fe2O3 nanoparticles and biochar on plant growth and fruit quality of muskmelon under cadmium stress

Cadmium pollution in farmland has become a global environmental problem, threatening ecological security and human health. Biochar is effective in remediation of soil pollution. However, high concentrations of biochar can inhibit plant growth, and low concentrations of biochar have limited mitigation effect on cadmium toxicity. Therefore, the combination of low-concentration biochar and other amendments is a promising approach to alleviate cadmium toxicity in plants and improve the safety of edible parts. In this study, muskmelon was selected as the research object, and different concentrations of α-Fe₂O₃ nanoparticles were used alone or combined with biochar to explore the effects of different treatments on muskmelon plants in cadmium-contaminated soil. The results showed that the combined application of 250 mg/kg α-Fe₂O₃ nanoparticles and biochar had a good effect on the repair of cadmium toxicity in muskmelon plants. Compared with cadmium treatment, its application increased plant height by 32.53%, cadmium transport factor from root to stem decreased by 32.95%, chlorophyll content of muskmelon plants increased by 14.27%, and cadmium content in muskmelon flesh decreased by 18.83%. Moreover, after plant harvest, soil available cadmium content in 250 mg/kg α-Fe₂O₃ nanoparticles and biochar combined treatment decreased by 31.18% compared with cadmium treatment. The results of this study provide an effective reference for the composite application of different exogenous amendments and a feasible idea for soil heavy metal remediation and mitigation of cadmium pollution in farmland.

Towards the Sustainable Exploitation of Salt-Tolerant Plants: Nutritional Characterisation, Phenolics Composition, and Potential Contaminants Analysis of Salicornia ramosissima and Sarcocornia perennis alpini

Increasing soil salinisation represents a serious threat to food security, and therefore the exploitation of high-yielding halophytes, such as Salicornia and Sarcocornia, needs to be considered not merely in arid regions but worldwide. In this study, Salicornia ramosissima and Sarcocornia perennis alpini were evaluated for nutrients, bioactive compounds, antioxidant capacity, and contaminants. Both were shown to be nutritionally relevant, exhibiting notable levels of crude fibre and ash, i.e., 11.26-15.34 and 39.46-40.41% dry weight (dw), respectively, and the major minerals were Na, K, and Mg. Total phenolics thereof were 67.05 and 38.20 mg of gallic acid equivalents/g extract dw, respectively, mainly p-coumaric acid and quercetin. Both species displayed antioxidant capacity, but S. ramossima was prominent in both the DPPH and ß-carotene bleaching assays. Aflatoxin B1 was detected in S. ramosissima, at 5.21 µg/Kg dw, which may pose a health threat. The Cd and Pb levels in both were low, but the 0.01 mg/Kg Hg in S. perennis alpini met the maximum legal limit established for marine species including algae. Both species exhibit high potential for use in the agro-food, cosmetics, and pharmaceutical sectors, but specific regulations and careful cultivation strategies need to be implemented, in order to minimise contamination risks by mycotoxins and heavy metals.

Heavy metal mapping, source identification, and ecological risk assessment in the International Hamoun wetland, Sistan region, Iran

This study is aimed at assessing the ecological risk of heavy metals (HMs) in the International Hamoun wetland, southeastern Iran. Twenty sediment samples were collected from the wetland surface for geochemical analysis of 23 HMs. The inverse distance weighting (IDW) technique was used to map the HMs. The single and multi-element pollution indicators and PER index (PERI) were respectively used to determine the contamination intensity and PER level. The principal components analysis (PCA) was performed to identify the HM source. The mean concentration of cesium (Cs: 5.2 µg/g), selenium (Se: 0.9 µg/g), and tellurium (Te: 0.2 µg/g) was higher than their mean values in the Earth's crust. The enrichment factor (EF) showed the Hamoun was high to extremely enriched by Te, As, and Se. The geo-accumulation index (GeoI) revealed the highest level of contamination caused by As, barium (Ba), cobalt (Co), chromium (Cr), cuprum (Cu), ferrum (Fe), manganese (Mn), nickel (Ni), lead (Pb), rubidium(Rb), titanium (Ti), vanadium(V), yttrium (Y), and zinc (Zn) in most study sites. The sediment contamination factor in more than 55% of the sediment samples was between 8 and 16, indicating very high contamination intensity in the studied wetland. The PER values were between 80 and 160 in more than 60% of the sediment samples, suggesting a considerable risk in the wetland. The PCA showed both anthropogenic and crustal activities were effective in increasing the concentration of HMs in the wetland. The largest ecological risk was due to arsenic (As) and cadmium (Cd). It is recommended to pay more attention to these HMs, which could cause more environmental pollution in the International Hamoun wetland, southeastern Iran.

Health risk of consuming Sphoeroides spp. from the Navachiste Lagoon complex due to its trace metals and organochlorine pesticides content

The Navachiste complex (NAV) is impacted by neighbored human activities and is located in the southwestern coastal zone of the Gulf of California. The study determines the trace metal (TM) and organochlorine pesticides (OCP) health risk content in the edible tissue of Sphoeroides spp. from NAV. The daily intakes (EDI), target hazard quotient (THQ), hazard index (HI), and carcinogenic and non-carcinogenic risks were calculated. Twenty OCP and seven TM were detected. Cd, Cu, Fe, Mn, Pb, and Zn were above MRLs. The γ‒Chlordane was the most frequent OCP. The highest average concentration was for α‒HCH, followed by γ‒chlordane. With the high ratios of γ‒HCH, p, p'‒ DDD and p, p'‒DDD, and the absence of p, p'‒ DDT, the higher ratios for dieldrin and endrin than for aldrin, α‒ chlordane, γ‒chlordane, heptachlor, and heptachlor epoxide indicates historical contamination. In contrast, the residual products of methoxychlor, endosulfan, and its isomers indicate endosulfan's recent use. The TM EDI, THQ > 1 (at 120 g day^-1), and the ILCR (> 1 × 10^-6) were above minimum levels, showing a high-risk potential for cancer development in the long term.

Recent Advances in Minimizing Cadmium Accumulation in Wheat

Cadmium (Cd), a toxic heavy metal, affects the yield and quality of crops. Wheat (Triticum aestivum L.) can accumulate high Cd content in the grain, which poses a major worldwide hazard to human health. Advances in our understanding of Cd toxicity for plants and humans, different parameters influencing Cd uptake and accumulation, as well as phytoremediation technologies to relieve Cd pollution in wheat have been made very recently. In particular, the molecular mechanisms of wheat under Cd stress have been increasingly recognized. In this review, we focus on the recently described omics and functional genes uncovering Cd stress, as well as different mitigation strategies to reduce Cd toxicity in wheat.

Magnetically Recyclable Loofah Biochar by KMnO4 Modification for Adsorption of Cu(II) from Aqueous Solutions

Novel KMnO₄-modified loofah biochar loaded with nano-Fe₂O₃ (FMLB) was successfully synthesized for Cu(II) adsorption. Nitrogen adsorption method, scanning electron microscope, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer, and other characterization measurements were used to evaluate the physical and chemical properties of FMLB and nano-Fe₂O₃-loaded biochar (FLB). The results show that the adsorption behavior of Cu(II) can be best fitted by the Langmuir isotherm model and the pseudo-second-order (PSO) kinetic model, indicating that the surface of FMLB was composed of homogeneous adsorption, and chemical adsorption dominated the adsorption process under optimal reaction conditions. The adsorption capacity of FMLB is improved by 42.86% compared to FLB, and it remained over 75% after four cycles. The inner-sphere complexes with manganese oxide (MnO _x ) and oxygen-containing functional groups, as well as electrostatic interaction, physical adsorption, and ion exchange, play important roles in Cu(II) adsorption. The saturation magnetization of FMLB was 10.41 emu/g, ensuring that it can be easily separated from aqueous solutions. Therefore, magnetically recyclable biochar modified by KMnO₄ is a feasible method for Cu(II) adsorption.

Recent advances in bacterial biosensing and bioremediation of cadmium pollution: a mini-review

Cadmium (Cd) pollution has become a global environmental issue because Cd gets easily accumulated and translocated in the food chain, threatening human health. Considering the detrimental effects and non-biodegradability of environmental Cd, this is an urgent issue that needs to be addressed through the development of robust, cost-effective, and eco-friendly green routes for monitoring and remediating toxic levels of Cd. This article attempts to review various bacterial approaches toward biosensing and bioremediation of Cd in the environment. This review focuses on the recent development of bacterial cell-based biosensors for the detection of bioavailable Cd and the bioremediation of toxic Cd by natural or genetically-engineered bacteria. The present limitations and future perspectives of these available bacterial approaches are outlined. New trends for integrating synthetic biology and metabolic engineering into the design of bacterial biosensors and bioadsorbers are additionally highlighted.