Toxic chemicals from uncontrolled e-waste recycling: Exposure, body burden, health impact

Leaching profile of per- and polyfluoroalkyl substances from selected e-waste components and potential exposure pathways from discarded components

Improper handling and disposal of Waste Electrical and Electronic Equipment (WEEE) containing PFAS can lead to the release of these substances into the environment. In this study, we have collected and characterized PFAS leaching profiles of selected e-waste components, including keyboards, cables, monitor screens, and circuit boards, and discussed potential PFAS exposure routes during e-waste disposal by landfilling and associated environmental and health risks. The e-waste components were disassembled, separated, sorted, shredded, and grounded, and leaching experiments were conducted for 30 days to elucidate the potential release and distribution of PFAS from the e-waste components into the environment. PFAS were extracted by solid phase extraction and analyzed through liquid chromatography-mass spectrometry (LC-MS/MS) in e-waste leachate samples to investigate their occurrence and composition in the different e-waste components. The leachate from the e-waste components had 21 out of the 40 PFAS analyzed, in which the most predominant and abundant were perfluorobutanoic acid, perfluorohexanoic acid, perfluorooctanoic acid, and perfluorooctanesulfonic acid. The cables had the highest sum of PFAS in the leachate with concentrations up to 465 ng/kg. Mobilization of PFAS from e-waste components deposited in landfills through leachate requires proper management practices to protect the environment and public health.

Using hair as a non-invasive matrix to assess the exposure of e-waste workers to selected heavy metals in Pakistan

Pakistan has become a significant recipient of e-waste, largely due to lower labor costs, lack of local environmental regulations, and less stringent international controls. Limited research exists on e-waste generation, management, and pollution in Pakistan. This study aimed to analyze levels of selected heavy metals in human hair samples from workers at informal e-waste processing facilities in six major cities: Karachi, Lahore, Rawalpindi, Faisalabad, Gujranwala, and Peshawar. A total of 150 hair samples were collected from workers aged 15 to 60 years and compared with samples from a control group of individuals who had no exposure to e-waste processing for at least the previous five years. Results revealed higher average concentrations (µg/kg) of Zn (577) in the hair of e-waste facility workers, followed by Fe (534), Al (265), and Cu (105). Significant age-related differences were observed for Zn, Fe, Cd, and Pb (p < 0.01), indicating these metals are prevalent during e-waste recycling. Notably, Fe, Zn, and Al concentrations were significantly higher in the 56 + age group, suggesting prolonged exposure. Strong correlations (p < 0.01) were found between pairs such as Al-Cu, Al-Fe, Zn-Cu, and Cd-Pb, which can serve as markers of high exposure due to prolonged e-waste recycling activities. In conclusion, hair analysis is a noninvasive, cost-effective method to provide preliminary information on heavy metal exposure in both control and exposed groups. Further studies are recommended to evaluate the correlation between heavy metals in hair, urine, and blood samples of informal e-waste recyclers to establish exposure routes and adverse health effects on metabolic activities.

Deciphering the phenotypic, inflammatory, and endocrine disrupting impacts of e-waste plastic-associated chemicals

As the volume of plastic waste from electrical and electronic equipment (WEEE) continues to rise, a significant portion is disposed of in the environment, with only a small fraction being recycled. Both disposal and recycling pose unknown health risks that require immediate attention. Existing knowledge of WEEE plastic toxicity is limited and mostly relies on epidemiological data and association studies, with few insights into the underlying toxicity mechanisms. Therefore, this study aimed to perform comprehensive chemical screening and mechanistic toxicological assessment of WEEE plastic-associated chemicals. Chemical analysis, utilizing suspect screening based on high-resolution mass spectrometry, along with quantitative target chemical analysis, unveiled numerous hazardous compounds including polyaromatic compounds, organophosphate flame retardants, phthalates, benzotriazoles, etc. Toxicity endpoints included perturbation of morphological phenotypes using the Cell Painting assay, inflammatory response, oxidative stress, and endocrine disruption. Results demonstrated that WEEE plastic chemicals altered the phenotypes of the cytoskeleton, endoplasmic reticulum, and mitochondria in a dose-dependent manner. In addition, WEEE chemicals induced inflammatory responses in resting macrophages and altered inflammatory responses in lipopolysaccharide-primed macrophages. Furthermore, WEEE chemicals activated the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway, indicating oxidative stress, and the aryl hydrocarbon receptor (AhR). Endocrine disruption was also observed through the activation of estrogenic receptor-α (ER-α) and the induction of anti-androgenic activity. The findings show that WEEE plastic-associated chemicals exert effects in multiple subcellular sites, via different receptors and mechanisms. Thus, an integrated approach employing both chemical and toxicological methods is essential for comprehensive assessment of the toxicity mechanisms and cumulative chemical burden of WEEE plastic-associated chemicals.

Heavy metal pollution from standardized e-waste dismantling activities: Pollution index, risk assessment and intervening measures

Due to the e-waste complexity and recycling technology limitations, more and more attention has been paid to the inevitable pollution in the standardized recycling process. This study systematically explores the heavy metals (HMs) (from surface dust) pollution characteristics and exposure risk of a typical e-waste dismantling plant (EDP) in South China. Further, this study explores the real level of health risks through valence analysis of a typical HM (Cr), and seeks effective measures to reduce exposure risk through behavioral science methods. The current results showed that the concentration of seven HMs in surface dust of the EDP is between ND-1.91 × 104 mg/kg. All the HM assessment models showed that the EDP has a certain degree of HM pollution. The highest non-carcinogenic risk (2.10) and carcinogenic risk (1.60 ×10-4) caused by the EDP were higher than the reference dose, indicating the high potential exposure risk of surface dust. However, the valence analysis showed that the health risk may be overestimated due to the fact that the existing carcinogenic risk of Cr is calculated in the form of Cr (VI). The behavioral science method showed that improving workers' standardized behavior habits and intentions is an effective way to avoid workers' exposure to HMs.

Design, Implementation and Environmental Impact of Cutoff Wall for Pollution Control in an Industrial Legacy Site

Heavy metal-organic pollutants compound pollution at industrial legacy sites and have caused damage to the ecological environment and human health during recent decades. In view of the difficulty and high cost of post-contamination remediation, it is worth studying, and practically applying, cutoff walls to reduce the spread of pollution in advance. In this study, field-scale studies were carried out at e-waste dismantling legacy sites in Taizhou, Zhejiang Province of China, through the process of site investigation, numerical simulation, and cutoff wall practical application. Firstly, the concentrations and spatial distributions of Pb, Cd and polychlorinated biphenyls (PCBs) and poly brominated diphenyl ethers (PBDEs) were identified in both soil and groundwater. Then, potential dispersal routes of key combined contaminants (Pb and PCBs) at the soil-groundwater interface were systematically studied through numerical simulation applying Visual MODFLOW-MT3DMS. One site was chosen to predict the barrier effect of differently sized cutoff walls based on the migration path of compound pollutants. A protocol for a cutoff wall (50 m length × 2 m width × 3 m height) was finally verified and applied at the real contaminated site for the blocking of compound pollutant diffusion. Further, the groundwater quality of the contaminated site was monitored consecutively for six months to ensure the durability and stability of barrier measures. All pollutant indicators, including for Pb and PCB complex pollutants, were reduced to below the national Grade IV groundwater standard value, achieving environmental standards at these polluted sites and providing possibilities for land reuse. In summary, this field-scale test provided new ideas for designing cutoff walls to block the diffusion of complex pollutants; it also laid a basis for the practical application of cutoff walls in pollution prevention and control of complex contaminated sites and for soil-groundwater environmental protection at industrial heritage sites.

Enhancing ergonomics in E-waste disassembly: the impact of collaborative robotics on muscle activation and coordination

Disassembly, as a part of the electronic waste (e-waste) management process, is a labour-intensive task. The emergence of collaborative robots (cobots) provides a robotic solution to reduce the human efforts during disassembly. This study evaluated muscle activation patterns during cobot-assisted e-waste disassembly using surface electromyography (EMG). Twenty-two participants were recruited to perform disassembly tasks with and without cobot assistance. EMG signals from biceps brachii (BB), brachioradialis (BR), upper trapezius (UT), and erector spinae (ES) were collected simultaneously. Six features were then calculated to determine muscle activation patterns. Additionally, EMG-EMG coherence analysis was conducted for BR and ES muscles. Results showed a significant reduction in muscle activity with cobot assistance, particularly in the left ES muscle (46.4% decrease). Moreover, coherence between BR and ES muscles significantly increased. These findings indicate the proposed collaboration strategy not only reduces the muscle activity but also sheds light on enhancing muscle coordination during e-waste disassembly.

The use of digital health services to combat E-waste health hazards: A review on the impact and awareness in Southwest Nigeria

The rapid advancement of technology has led to a significant increase in electronic waste (e-waste), posing serious health and environmental risks, particularly in developing regions like Southwest Nigeria. This review explores the utilization of digital health services to combat the health hazards associated with e-waste exposure. Digital health technologies, including mobile health applications, telemedicine, and electronic health records, play a critical role in raising awareness about e-waste toxicity, monitoring health impacts, and providing remote healthcare services to at-risk populations. This article discusses the effectiveness of these technologies in promoting safer e-waste handling practices and mitigating health risks, highlighting their potential in supporting public health interventions in underserved areas. The study underscores the need for strategic investments and policy support to enhance the adoption of digital health solutions in managing e-waste hazards by analyzing current challenges and opportunities, ultimately contributing to better health outcomes and environmental sustainability.

Improving the removal rate of bisphenol A and Cu2+ from water using P/N coexisting β-cyclodextrin-based adsorbents by enhancing adsorbents-pollutants interactions

Bisphenol A (BPA), a prominent endocrine-disrupting compound, has garnered considerable attention due to its urgent need for rapid removal from water. Herein, we first used a novel reactive phosphine oxide containing tertiary amines as crosslinker to prepare water-insoluble crosslinked β-cyclodextrin (β-CD) adsorbent via radical-mediated thiol-ene polymerization. Owing to the synergistic hydrogen-bond (H-bond) interactions of functional groups (tertiary amine and PO groups) toward BPA, the resulted adsorbents showed fast adsorption kinetics to BPA with an adsorption equilibrium time of 5 min. After six adsorption-desorption cycles, the removal efficiency of BPA was 92.5 %, indicating its excellent reusability. Due to the presence of the CS bonds, the β-CD -derived bio-adsorbents offered binding sites for Cu2+ ions, resulting in a maximum adsorption capacity of 113.89 mg g-1.

E-waste: mechanisms of toxicity and safety testing

Currently, information on the toxicity profile of the majority of the identified e-waste chemicals, while extensive and growing, is admittedly fragmentary, particularly at the cellular and molecular levels. Furthermore, the toxicity of the chemical mixtures likely to be encountered by humans during and after informal e-waste recycling, as well as their underlying mechanisms of action, is largely unknown. This review paper summarizes state-of-the-art knowledge of the potential underlying toxicity mechanisms associated with e-waste exposures, with a focus on toxic responses connected to specific organs, organ systems, and overall effects on the organism. To overcome the complexities associated with assessing the possible adverse outcomes from exposure to chemicals, a growing number of new approach methodologies have emerged in recent years, with the long-term objective of providing a human-based and animal-free system that is scientifically superior to animal testing, more effective, and acceptable. This encompasses a variety of techniques, typically regarded as alternative approaches for determining chemical-induced toxicities and holds greater promise for a better understanding of key events in the metabolic pathways that mediate known adverse health outcomes in e-waste exposure scenarios. This is crucial to establishing accurate scientific knowledge on mixed e-waste chemical exposures in shorter time frames and with greater efficacy, as well as supporting the need for safe management of hazardous chemicals. The present review paper discusses important gaps in knowledge and shows promising directions for mechanistically anchored effect-based monitoring strategies that will contribute to the advancement of the methods currently used in characterizing and monitoring e-waste-impacted ecosystems.

Occurrence and ecotoxicological impacts of polybrominated diphenyl ethers (PBDEs) in electronic waste (e-waste) in Africa: Options for sustainable and eco-friendly management strategies

Polybrominated diphenyl ethers (PBDEs) are persistent contaminants used as flame retardants in electronic products. PBDEs are contaminants of concern due to leaching and recalcitrance conferred by the stable and hydrophobic bromide residues. The near absence of legislatures and conscious initiatives to tackle the challenges of PBDEs in Africa has allowed for the indiscriminate use and consequent environmental degradation. Presently, the incidence, ecotoxicity, and remediation of PBDEs in Africa are poorly elucidated. Here, we present a position on the level of contamination, ecotoxicity, and management strategies for PBDEs with regard to Africa. Our review shows that Africa is inundated with PBDEs from the proliferation of e-waste due to factors like the increasing growth in the IT sector worsened by the procurement of second-hand gadgets. An evaluation of the fate of PBDEs in the African environment reveals that the environment is adequately contaminated, although reported in only a few countries like Nigeria and Ghana. Ultrasound-assisted extraction, microwave-assisted extraction, and Soxhlet extraction coupled with specific chromatographic techniques are used in the detection and quantification of PBDEs. Enormous exposure pathways in humans were highlighted with health implications. In terms of the removal of PBDEs, we found a gap in efforts in this direction, as not much success has been reported in Africa. However, we outline eco-friendly methods used elsewhere, including microbial degradation, zerovalent iron, supercritical fluid, and reduce, reuse, recycle, and recovery methods. The need for Africa to make and implement legislatures against PBDEs holds the key to reduced effect on the continent.

Biodegradation of e-waste microplastics by Penicillium brevicompactum

Electronic and electric waste (e-waste) management strategies often fall short in dealing with the plastic constituents of printed circuit boards (PCB). Some plastic materials from PCB, such as epoxy resins, may release contaminants, but neither potential environmental impact has been assessed nor mitigation strategies have been put forward. This study assessed the biodegradation of microplastics (1-2 mm in size) from PCB by the fungus Penicillium brevicompactum over 28 days, thus contributing to the discussion of mitigation strategies for decreasing the environmental impact of such plastics in the environment. The capacity of P. brevicompactum to induce microplastic fragmentation and degradation has been determined by the increased the number of smaller-sized particles and microplastic mass reduction (up to 75 % within 14 days), respectively. The occurrence of chain scission and oxidation of microplastics exposed to P. brevicompactum when compared with the control conditions (which occurred only after 28 days of exposure) can be observed. Furthermore, Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy performed in dried biomass put in evidence an increase in the absorption intensities in regions that could be attributed to functional groups associated with carbohydrates. The results underline the potential role of the genus Penicillium, particularly P. brevicompactum, in the biodegradation of microplastics from PCB, thus providing the basis for further exploration of its potential for e-waste bioremediation and research on the underlying mechanisms for sustainable approaches to mitigate e-waste pollution.

Waste to energy: Trending key challenges and current technologies in waste plastic management

Due to the 'forever' degrading nature of plastic waste, plastic waste management is often complicated. The applications of plastic are ubiquitous and inevitable in many scenarios. Current global waste plastics production is ca. 3.5 MMT per year, and with the current trend, plastic waste production will reach 25,000 MMT by 2040. However, the rapid growth in plastic manufacture and the material's inherent nature resulted in the accumulation of a vast amount of plastic garbage. The current recycling rate is <10 %, while the large volumes of discarded plastic waste cause environmental and ecological problems. Recycling rates for plastic vary widely by region and type of plastic. In some developed countries, the recycling rate for plastics is around 20-30 %, while in many developing nations, it is much lower. These statistics highlight the magnitude of the plastic waste problem and the urgent need for comprehensive strategies to manage plastic waste more effectively and reduce its impact on the environment. This review critically analyses past studies on the essential and efficient techniques for turning plastic trash into treasure. Additionally, an attempt has been made to provide a comprehensive understanding of the plastic upcycling process, the 3Rs policy, and the life-cycle assessment (LCA) of plastic conversion. The review advocates pyrolysis as one of the most promising methods of turning plastic trash into valuable chemicals. In addition, plastic waste management can be severely impacted due to uncontrollable events, such as Covid 19 pandemic. Recycling and chemical upcycling can certainly bring value to the end-of-life plastic. However, the LCA analysis indicated there is still a huge scope for innovation in chemical upcycling area compared to mechanical recycling. The formulation of policies and heightened public participation could play a pivotal role in reducing the environmental repercussions of plastic waste and facilitating a shift towards a more sustainable future.

Valorization of e-waste via supercritical water technology: An approach for obsolete mobile phones

The improper handling of electronic waste has not only severe environmental impacts but also results in the loss of high economic potential. To address this issue, the use of supercritical water (ScW) technology for the eco-friendly processing of waste printed circuit boards (WPCBs) obtained from obsolete mobile phones has been explored in this study. The WPCBs were characterized via MP-AES, WDXRF, TG/DTA, CHNS elemental analysis, SEM and XRD. A L9 Taguchi orthogonal array design was employed to evaluate the impact of four independent variables on the organic degradation rate (ODR) of the system. After optimization, an ODR of 98.4% was achieved at a temperature of 600 °C, a reaction time of 50 min, a flowrate of 7 mL min-1, and the absence of an oxidizing agent. The removal of the organic content from the WPCBs resulted in an increase in the metal concentration, with up to 92.6% of the metal content being efficiently recovered. During the ScW process, the decomposition by-products were continuously removed from the reactor system through the liquid or gaseous outputs. The liquid fraction, which was composed of phenol derivatives, was treated using the same experimental apparatus, achieving a total organic carbon reduction of 99.2% at 600 °C using H2O2 as the oxidizing agent. The gaseous fraction was found to contain hydrogen, methane, CO2, and CO as the major components. Finally, the addition of co-solvents, namely ethanol and glycerol, enhanced the production of combustible gases during the ScW processing of WPCBs.

Pyrolysis Kinetic Behavior and Thermodynamic Analysis of PET Nonwoven Fabric

This research aims to maximize polyethylene terephthalate (PET) nonwoven fabric waste and make it as a new source for benzoic acid extraction using a pyrolysis process. The treatment was performed using a thermogravimetric analyzer (TGA) and released products were characterized using FTIR spectroscopy and gas chromatography-mass spectrometry (GC-MS). The pyrolysis kinetic and thermodynamic behavior of PET fabric was also studied and simulated using different linear and nonlinear models. The results show that the PET fabric is very rich in volatile matter (80 wt.%) and can completely degrade under 490 °C with a weight loss of 84%. Meanwhile, the generated vapor was rich in the carbonylic C=O functional group (FTIR), and the GC-MS analysis concluded that benzoic acid was the major compound with an abundance of 75% that was achieved at the lowest heating rate (5 °C/min). The linear kinetic results showed that PET samples had an activation energy in the ranges of 193-256 kJ/mol (linear models) and ~161 kJ/mol (nonlinear models). The thermodynamic parameters, including enthalpy, Gibbs free energy, and entropy, were estimated in the ranges of 149-250 kJ/mol, 153-232 kJ/mol, and 256-356 J/mol K, respectively. Accordingly, pyrolysis treatment can be used to extract benzoic acid from PET fabric waste with a 134% increase in the benzoic acid abundance that can be recovered from PET bottle plastic waste.

Enrichment of cadmium and selenium in soil-crop system and associated probabilistic health risks in black shale areas

Selenium (Se) is the essential component of selenoenzymes and contributes to antioxidant defenses. The capability of Se to antagonize the toxicity of heavy metals makes it an essential trace element for human and plant health. Soils derived from black shales are naturally enriched with Se; however, these soils often contain high geological cadmium (Cd), due to the weathering of black shales rich in Cd and Se. Cadmium, as a known Group I carcinogen, could induce damage to various organs. This therefore poses a major challenge for safe cultivation of Se-rich land resources. In this study, a total of 247 paired soil-crop samples were collected from a typical farmland derived from black shales. The concentrations of Cd and Se in the samples were analyzed by inductively coupled plasma mass spectroscopy and atomic fluorescence spectrometry. Monte Carlo simulation was applied to evaluate potential health risks associated with Cd exposure. Cadmium was the critical pollutant in the study area, with the average value of 1.53 mg/kg. Moreover, both children and adults living in the area had a significant non-carcinogenic health risk. Additional health risk assessments revealed that diet was the main contributor for both children and adults among the four pathways (diet > soil ingestion > soil dermal adsorption > soil inhalation). Furthermore, our results revealed that leguminous vegetables and maize were ideal for this site due to their high Se and low Cd accumulation abilities. These findings provide support for adjusting planting structure by variety screening to mitigate the health risk induced by Cd.

Cationic dialdehyde cellulose microfibers for efficient removal of eriochrome black T from aqueous solution

Materials based on cellulose have been widely used as a decontaminant agent of wastewater. However, it can not be found in the literature any application of the cationic dialdehyde cellulose (cDAC) in anionic dye removal. Therefore, this study aims a circular economy concept using sugarcane bagasse to obtain a functionalized cellulose by oxidation and cationization. cDAC was characterized by SEM, FT-IR, oxidation degree, and DSC. Adsorption capacity was evaluated by pH, kinetic, concentration effect, strength ionic tests, and recycling. The kinetic followed Elovich model (R² = 0.92605 for EBT = 100 mg/L) and non-linear Langmuir model (R² = 0.94542), which resulted in a maximum adsorption capacity of 563.30 mg/g. The cellulose adsorbent reached an efficient recyclability of 4 cycles. Thus, this work presents a potential material to become a new, clean, low-cost, recyclable, and environmentally friendly alternative for effluent decontamination-containing dyes.

Organic matter degradation determines the concentrations of polybrominated diphenyl ethers in sediments. Multivariate learning on environmental and experimental models

Sediment organic matter (SOM) plays an important role in capturing polybrominated diphenyl ethers (PBDEs) due to its affinity to hydrophobic and lipophilic compounds. Previous publications about correlations between PBDE concentrations and SOM content showed discrepancies among the results, reporting either significant positive correlations or no correlations at all. This work aimed to provide a deeper insight into SOM characteristics that might determine the concentrations of PBDEs in sediments. Sediment samples from Mendoza province, Argentina, were analyzed to contrast two models, environmental and experimental, using multivariate learning methods. Mendoza has been going through increasing events of drought and water scarcity, hence the occurrence, transport, and fate of contaminants as PBDEs in aquatic environments is of superlative importance. Principal component analysis (PCA) and partial least squares regression (PLS) were used to evaluate the correlations between physicochemical properties of sediments, semi-quantitative Fourier transform infrared (FTIR) area ratios obtained from SOM spectra, and PBDE concentrations in sediments. Moreover, a linear model was proposed to determine SOM density using FTIR area ratios and it was used as an additional variable in multivariate analyses. The results obtained from PCA and PLS were consistent and revealed that PBDE concentrations in sediments were correlated with a more degraded SOM, characterized by shorter and more branched hydrocarbon chains. PBDE concentrations were also correlated with higher SOM density values, which in turn were correlated with SOM degradation. These findings extend previous understanding and emphasize that not only is the organic matter content a factor in determining PBDE concentrations in sediments, but also and more significantly, its degree of degradation.

Narrative of hazardous chemicals in water: Its potential removal approach and health effects

H₂O is essential for life to exist on earth; it is important to guarantee both the quality and supply of water to satisfy world demand. However, it became contaminated by a number of hazardous, inorganic industrial pollutants, which caused a number of issues like irrigation activities and unsafe human ingestion. Long-term exposure to harmful substances can result in respiratory, immunological, and neurological illnesses, cancer, and problems during pregnancy. Therefore, removing hazardous substances from wastewater and natural water sources is crucial. It is necessary to develop an alternate method that can effectively remove these toxins from water bodies, as conventional methods have several drawbacks. This review primarily aims to achieve the following goals: 1) to discuss the distribution of harmful chemicals: 2) to give specifics on numerous possible strategies for getting rid of hazardous chemicals, and 3) its effects on the environment and consequences for human health have been examined.

A first comprehensive estimate of electronic waste in Canada

Detailed analysis of electronic waste (e-waste) generation and composition is of utmost importance for the proper management of growing e-waste stream worldwide, containing both hazardous and valuable materials. Considering the absence of such comprehensive and up-to-date studies in Canada, this work presents the first estimate of put-on-market electrical and electronic equipment (EEE), the in-use stocks of EEE and e-waste generation in Canada from 1971 to 2030 for 51 product categories comprising 198 product types. Using a dynamic material flow analysis (MFA), the put-on-market EEE is estimated based on trade data retrieved from national and international import and export statistics, and the in-use stocks of EEE and the resulting e-waste are calculated using the Weibull distribution function. The results show that the total mass of EEE within the 60-year period is estimated to be 42.3 million tonnes, with an annual average growth rate of approximately 0.5%. By 2030, the total accumulated in-use stock of EEE is estimated to exceed 13 million tonnes. The estimated e-waste over the 60-year timespan is 29.1 million tonnes. The total annual e-waste generation in Canada is calculated to be 252 kilo tonnes (kt) and 954 kt in the years 2000 and 2020 respectively, which is estimated to reach 1.2 million tonnes by 2030. The e-waste generation per capita increased from 8.3 kg in 2000 to 25.3 kg in 2020 and is estimated to reach 31.5 kg by 2030. This quantification provides valuable insights to policymakers for setting up targets for waste reduction and identifying the resource circularity potential for efficient management of e-waste.

PCDD/Fs in indoor environments of residential communities around a municipal solid waste incineration plant in East China: Occurrence, sources, and cancer risks

Prolonged exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) can pose several adverse outcomes on human health. However, there is limited information on public health associated with indoor PCDD/F exposure in residential environments. Here, we examined PCDD/F concentrations in indoor air and indoor dust samples obtained from households near a municipal solid waste incineration (MSWI) plant. Our measurements revealed that the toxic equivalent (TEQ) concentrations of PCDD/Fs in indoor air ranged from 0.01 to 0.05 pg TEQ/m³, which were below intervention thresholds (0.6 pg TEQ/m³). Additionally, the TEQ concentrations of PCDD/Fs in indoor dust ranged from 0.30 to 11.56 ng TEQ/kg. Higher PCDD/F levels were found in household dust in the town of Taopu compared to those in the town of Changzheng. Principal component analysis (PCA) of PCDD/Fs suggested that waste incineration was the primary source of PCDD/Fs in indoor air, whereas PCDD/Fs in indoor dust came from multiple sources. The results of the health risk assessment showed the carcinogenic risk due to indoor PCDD/F exposure was higher for adults than for nursery children and primary school children. The carcinogenic risks of PCDD/Fs for age groups residing near the MSWI plant were all less than the risk threshold (10^-5). Our findings will help to better understand the levels of PCDD/F exposure among urban populations living in residential communities around the MSWI plant and to formulate corresponding control measures to reduce probabilistic risk implications.

Self-Healing, Reconfigurable, Thermal-Switching, Transformative Electronics for Health Monitoring

Soft, deformable electronic devices provide the means to monitor physiological information and health conditions for disease diagnostics. However, their practical utility is limited due to the lack of intrinsical thermal switching for mechanically transformative adaptability and self-healing capability against mechanical damages. Here, the design concepts, materials and physics, manufacturing approaches, and application opportunities of self-healing, reconfigurable, thermal-switching device platforms based on hyperbranched polymers and biphasic liquid metal are reported. The former provides excellent self-healing performance and unique tunable stiffness and adhesion regulated by temperature for the on-skin switch, whereas the latter results in liquid metal circuits with extreme stretchability (>900%) and high conductivity (3.40 × 104  S cm-1 ), as well as simple recycling capability. Triggered by the increased temperature from the skin surface, a multifunctional device platform can conveniently conform and strongly adhere to the hierarchically textured skin surface for non-invasive, continuous, comfortable health monitoring. Additionally, the self-healing and adhesive characteristics allow multiple multifunctional circuit components to assemble and completely wrap on 3D curvilinear surfaces. Together, the design, manufacturing, and proof-of-concept demonstration of the self-healing, transformative, and self-assembled electronics open up new opportunities for robust soft deformable devices, smart robotics, prosthetics, and Internet-of-Things, and human-machine interfaces on irregular surfaces.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Identifying the influencing factors and constructing incentive pattern of residents' waste classification behavior using PCA-logistic regression

With the acceleration of urbanization, domestic waste has become one of the most inevitable factors threatening the environment and human health. Waste classification is of great significance and value for improving urban environmental quality and promoting human well-being. Based on the theory of planned behavior, we added external and socio-economic factors to systematically examine how they affect residents' waste classification behavior (WCB). We collected 661 valid data through a questionnaire survey conducted in Jinan, a pilot city for waste classification in China. Key driving factors were identified by combining binary logistic regression and the principal component analysis. The results showed that the elderly, women, and people with higher education are more likely to participate in waste classification. Attitude, collaborative governance, and institutional pressure positively affect WCB, while subjective norm and infrastructure have a negative effect. Knowledge mastery and degree of publicity are positively and significantly related to WCB, but other perceived behavioral control sub-variables negatively affect WCB. Based on the results and status of waste classification in Jinan, we propose the multi-agent linkage governance pattern from various dimensions to explore a powerful guiding incentive that can enhance WCB and provide a reference for waste management policymakers.

Recent advances in polymer composite, extraction, and their application for wastewater treatment: A review

Wastewater from diverse industrial sectors, agricultural practices and other household activities causes water pollution that result in different environmental issues. The main goals of wastewater treatment are typically to enhance the purity of wastewater and to enable the disposal of domestic and industrial effluents without endangering human health or causing excessive environmental issues. There were several natural and synthetic materials which have been utilized for wastewater treatment, amongst them polymers gain more importance due to their non-toxicity, economic feasibility, abundant availability of sources, renewability, biocompatibility, biodegradability, etc. The organic polymers such as cellulose, chitin, gelatin, alginates, lignin, dextran and other starch derivatives are the most commonly used natural polymers in wastewater treatments. The unique physical and chemical characteristics of the natural polymers make them become an alternative in wastewater treatments such as membrane filtration, adsorption, coagulation, flocculation and ion-exchange process to remove harmful contaminants such as toxic metals, dyes, medicines, pesticides, and so on. The review article discusses natural polymers and related uses in wastewater treatment. This review mainly focused on the wastewater treatment using natural polymers and the techniques involved for their extraction from natural sources. The recent trends in polymer extraction from the natural sources and the scope for the future research of natural polymers in various sectors are also discussed in detail.

Chiral signatures of polychlorinated biphenyls in serum from e-waste workers and their correlation with hydroxylated metabolites

Elevated concentrations of polychlorinated biphenyls (PCBs) found in environmental media and biota from typical e-waste dismantling sites have raised concerns regarding their human body burden and potential negative health effects. In the present study, the enantiomeric compositions of three typical chiral congeners (PCB-95, PCB-132, and PCB-149) were measured in 24 serum samples from e-waste workers by using gas chromatography coupled to triple quadrupole tandem mass spectrometry. The mean enantiomer fractions (EFs) of chiral congeners in serum from the workers were 0.655 ± 0.103, 0.679 ± 0.164, and 0.548 ± 0.095 for PCB-95, PCB-132, and PCB-149, respectively. The (+) enantiomers of PCB-95, PCB-132, and PCB-149 were enantioselectively enriched in serum. Significant positive correlations were observed between the EF of the chiral congener PCB-95 and the total concentration of OH-PCBs, suggesting that EF values of chiral PCBs could be used to indicate the extent of biological metabolism. In addition, the EF of PCB-95 in serum samples increased with increasing work duration of the e-waste workers, thus demonstrating the usefulness of EF values of chiral PCBs as tracers of human exposure to PCBs. Because of the enantioselective enrichment of (+) enantiomers of PCB-95, PCB-132, and PCB-149, further studies are needed to explore the metabolism and toxicity of chiral contaminants in humans.

Decadal Journey of E-Waste Recycling: What Has It Achieved?

E-waste recycling has been a hot topic around the world. This Feature revisits the issues raised by our previous Feature 10 years ago, i.e., the environmental, economic, and social benefits of e-waste recycling, using China as an example. The decadal journey of e-waste recycling has witnessed a giant leap from haphazard disposal initially to regulated disassembly presently. Specific successful stories include cleaned environment and reduced human exposure, significant advantages of urban mining over mineral mining, additional employment opportunities, and improved legislation system related to e-waste recycling. Strict legislation systems related to e-waste management based on the principle of Extended Producer Responsibility are key to the sustainable development of the e-waste recycling sector in China. The experiences and lessons learned in China would provide valuable guidelines for other developing countries.

Waste Management for Green Concrete Solutions: A Concise Critical Review

Reinforced concrete based on ordinary Portland cement (OPC) is one of the most commonly used materials in modern buildings. Due to the global growth of the building industry, concrete components have been partially or completely replaced with waste materials that can be used as binders or aggregates. Besides the ecological aspects, modern architecture widely needs materials to make the concrete durable, resisting large loads and various detrimental forces in the environment. This opens the possibilities of managing waste materials and applying them in practice. This paper presents a concise review of the green solutions for ecofriendly materials in the building industry that deal with the practical application of materials commonly treated as waste. The main emphasis was placed on their influence on the properties of the building material, optimal composition of mixtures, and discussion of the advantages and disadvantages of each of the “green” additives. It turned out that some solutions are far from being ecofriendly materials, as they leech and release numerous harmful chemicals into the environment during their presence in concrete. Finally, the paper suggests a research direction for the development of an ecofriendly structural material for a sustainable future.

Heavy Metal, Waste, COVID-19, and Rapid Industrialization in This Modern Era—Fit for Sustainable Future

Heavy metal contamination, waste, and COVID-19 are hazardous to all living things in the environment. This review examined the effects of heavy metals, waste, and COVID-19 on the ecosystem. Scientists and researchers are currently working on ways to extract valuable metals from waste and wastewater. We prefer Tessier sequential extraction for future use for heavy metal pollution in soil. Results indicated that population growth is another source of pollution in the environment. Heavy metal pollution wreaks havoc on soil and groundwater, especially in China. COVID-19 has pros and cons. The COVID-19 epidemic has reduced air pollution in China and caused a significant reduction in CO2 releases globally due to the lockdown but has a harmful effect on human health and the economy. Moreover, COVID-19 brings a huge amount of biomedical waste. COVID-19’s biomedical waste appears to be causing different health issues. On the other hand, it was discovered that recycling has become a new source of pollution in south China. Furthermore, heavy metal contamination is the most severe ecological effect. Likewise, every problem has a remedy to create new waste management and pollution monitoring policy. The construction of a modern recycling refinery is an important aspect of national waste disposal.