A comparative study of smear layer removal and erosion in apical intraradicular dentine with three irrigating solutions: a scanning electron microscopy evaluation

Evaluation of the effect of graphene oxide-based nanocomposites on smear layer by a scanning electron microscope: Laboratory investigation

This study is to examine the effect of graphene oxide (GO) and GO-based nanocomposites (GO_EDTA, GO_CHIT) on the smear layer by scanning electron microscopy (SEM). Sixty human single-rooted anterior teeth were used. Samples were randomly categorised into six groups. Distilled water in group 1, 17% EDTA in group 2, chitosan (CHIT) solution in group 3, GO solution in group 4, GO_EDTA solution in group 5 and GO_CHIT in group 6 were used as irrigation solutions. Photomicrographs were acquired from the coronal, middle and apical parts of the samples by SEM. Statistical analyses were performed using Kruskal-Wallis, Mann-Whitney U and Wilcoxon tests. There was a statistically significant difference among the groups (p < 0.003). Adding GO to CHIT and EDTA did not affect removing the smear layer in all segments (p < 0.003). Incorporating GO into EDTA and CHIT solutions did not change their interaction with the smear layer.

Comparison of smear layer removing efficacy of Cold Atmospheric Pressure (CAP) Plasma Jet with different chelating agents. An ex-vivo study

The present study aimed to assess the effectiveness of different final irrigation regimens (Cold Atmospheric Pressure Plasma Jet, MTAD, and EDTA) in removing the smear layer from intra-radicular dentin using a Scanning Electron Microscope (SEM). Eighty-four mandibular premolars were prepared with ProTaper Universal hand files and were equally divided into four groups i.e. Normal saline (control), EDTA, MTAD and CAP Plasma Jet. Prepared samples in the control, EDTA and MTAD groups were irrigated with 5 milliliters of the irrigant, and it was retained for 2 min. In the CAP Plasma Jet group, the plasma plume was directed towards the canal lumen for 2 min. The smear layer removal of all the groups was evaluated at the coronal, middle and apical thirds. Statistical analysis was performed using Kruskal-Wallis test followed by Dunn's test. Evaluation by SEM showed that the smear layer removal ability of MTAD and EDTA were significantly better than CAP Plasma Jet (p < 0.05). While CAP Plasma Jet showed results comparable to EDTA in the coronal third. In the middle and apical third of the canal, its effect was comparable to the control group (p > 0.05). MTAD and EDTA aided in better smear layer removal than the CAP Plasma Jet in the coronal, middle, and apical third of the test samples. CAP Plasma jet performed better in the coronal third.

The dynamic interplay of dietary acid pH and concentration during early-stage human enamel and dentine erosion

Dental erosion continues to be a significant global health concern affecting nearly 30% of adults world-wide. With increasing soft drink consumption predominantly driving its prevalence, strategies for prevention and control are often implemented when erosion is severe, or rates are high in the populace. While factors affecting dental erosion such as pH on enamel has received much attention, the effect of dietary acid concentration when factored out to a commercially available pH has yet to be determined. Furthermore, understanding these effects on dentine, which is known to be more susceptible to erosion than enamel can unravel structure property relationships between acid characteristics and hard tissue types. This study aimed to develop structure-property relationships between dietary acid concentration, and pH, on the nano-textural and nano-mechanical properties of human enamel and dentine during short-term simulated drinking. To achieve this, a novel sample preparation methodology and analysis approach was developed by applying atomic force microscopy (AFM) in quantitative imaging mode. This enabled simultaneous measurement of enamel and dentine morphology and mechanical properties. Flow-cells were used to simulate drinking, exposing polished and smear layer free human enamel and dentine to 30 s repeated cycles of unbuffered citric acid 6% (pH = 1.88) and 1% (w/v) (pH = 2.55) and commercially available buffered pH = 3.8 states, for up to 180 s. The same 50 µm × 50 µm area of specimen morphology was analysed using in-house developed nanotextural analysis using the bearing area curve (BAC) with a focus on roughness (Ra), normalised peak (PA) and valley areas (VA). Mechanical properties were simultaneously measured for stiffness (N/m) after each 30 s. While all studies agree pH is a major factor in the erosion of enamel, here its dominance over the treatment time varied, with concentration surpassing the importance of pH after initial acid contact. Conversely, dentine erosion showed concentration-dependent changes in morpho-mechanical properties only. These results not only highlight the dynamic process of erosion, but how the interplay between acid characteristics and dental tissue type impact the progression of very early-stage erosion.

The effects of different root canal irrigation protocols and artificial aging procedures on the bond strength between dentin and hybrid ceramic posts

The purpose of this study is to investigate the effects of different root canal irrigation protocols applied to the dentin and artificial aging procedures on the micro pushout bond strength (mPBS) between dentin and hybrid ceramic posts. Seventy-five single-rooted mandibular premolar teeth were divided into 5 groups (Gr1-5). 50 of the teeth were used for the mPBS tests (n = 10), whereas 25 were used for the smear layer examinations (n = 5). Post space were prepared and irrigated with different irrigation-protocols in each group. (Gr1:[SS], Gr2:[NaOCl] + SS, Gr3:[EDTA] + NaOCl + SS, Gr4:[MA] + NaOCl + SS, Gr5:[Ch] + NaOCl + SS). Post and core pattern were fabricated with pattern resin and a fiber post, after scanning, the posts were milled with Vita Enamic resin ceramic block, and cemented. After 7 days the roots were sliced at thicknesses of 1 mm; half of them were subjected to mPBS test, while the other half were tested after undergoing mechanical cycling for artificial aging. For data analysis, the Shapiro-Wilk test was utilized to test normal distributions, 3-way analysis of variance was used to compare mPBS, and Tukey's HSD test was conducted for multiple comparisons. SEM analysis was performed for examination of failure modes and smear layer removal. Different root canal irrigation protocols affected mPBS significantly. While Gr4 had the highest mPBS, Gr1 had the lowest. Regarding to different zones, the highest mPBS was in coronal zone, and the lowest one was in the apical zone. The aging procedure also led to a statistically-significant decrease in mPBS. Most frequent failure modes were cohesive failure in dentin and mixed failure. Irrigation with 7%MA (Gr4) showed better performance than 17% EDTA (Gr3) in smear layer removal, especially at the apical zone of the tooth. This is critical for the success of root canal treatment and increased the mPBS to a higher extent in all zones of the tooth.

Smear Layer Removal by 1% Phytic Acid after Root Canal Preparation with Three Different Rotary Systems

AIM: This study compared the removal of the smear layer using 1% phytic acid or 17% ethylenediaminetetraacetic acid (EDTA) after root canal instrumentation with SmartTrack X3, Endo*star E, and ProTaper Gold rotary systems using an environmental scanning electron microscope (ESEM). METHODS: Sixty single-rooted unidentified extracted human maxillary anterior teeth were selected. The length of all the roots used was adjusted to 16 mm from the apex. Modified access cavities were done. Roots were equally and randomly allocated to three main groups (n = 20) corresponding to the rotary systems: group A1, SmartTrack X3; group A2, Endo*star E3; and group A3, ProTaper Gold. Each group was divided into two equal subgroups (n = 10), corresponding to the chelating agents applied as a final rinse: subgroup B1, 1% phytic acid, and subgroup B2, 17% EDTA. Roots were split in a buccolingual direction into two equal halves and examined under ESEM in the presence or absence of a smear layer at the cervical, middle, and apical segments. RESULTS: 1% Phytic acid and 17% EDTA recorded no statistically significant for removing the smear layer. For all subgroups, there was a significant difference in smear layer removal and more open dentinal tubules in the cervical segment versus the apical segment. CONCLUSION: In smear layer removal from root canals, 1% phytic acid was effective as 17% EDTA in smear layer removal form root canals after SmartTrack X3, Endo*star E3, or ProTaper Gold rotary systems instrumentation.

Influence of sodium hypochlorite concentration on cavitation effect and fluid dynamics induced by photon-induced photoacoustic streaming (PIPS): A visualization study

PURPOSE

The aim of the present study was to visualize and compare the cavitation effect and fluid dynamics induced by photon-induced photoacoustic streaming (PIPS) using sodium hypochlorite (NaOCl) with different concentrations as irrigant.

METHODS

Forty artificial root canals were prepared using MTWO Niti file up to size #25/.06. The canals were randomly divided into four groups (n = 10/group). High-speed camera was used to visualize and compare the cavitation effect induced by PIPS in the artificial root canals containing saline or NaOCl. Fluid velocity and Reynolds number of saline, 1%-, 2.5%- and 5.25% NaOCl irrigants induced by PIPS in the apical region were calculated using TEMA 2D software while the fluid motions were recorded.

RESULTS

Visualization profile revealed that NaOCl presented a stronger cavitation effect and fluid dynamics than saline during PIPS activation. In the apical region, 1% NaOCl group presented the highest average velocity of 3.868 m/s, followed by 2.5% NaOCl group (3.685 m/s), 5.25% NaOCl group (2.353 m/s) and saline group (1.268 m/s), corresponding to Reynolds number of 1653.173, 1572.196, 995.503 and 477.692. Statistically higher fluid velocity was calculated in 1% and 2.5% NaOCl groups compared to saline group, respectively (p < 0.05).

CONCLUSIONS

The application of NaOCl and its concentration significantly influence the cavitation effect and fluid dynamics during PIPS activation. 1% and 2.5% NaOCl groups presented a more violent fluid motion in the apical region when activated by PIPS.

Cytotoxicity of different concentrations of glycolic acid and its effects on root dentin microhardness - An in vitro study

The aim of the study was to evaluate the cytotoxicity of different glycolic acid concentrations (GA) and its effects on dentinal microhardness. Cytotoxicity was evaluated after inoculation of test irrigants in the lymphocyte primary culture for 3 min. The tested substances were distilled water(DW); 17% EDTA; QMix; 10% GA; 17% GA; and 25% GA. Counting of total, live and dead cells was performed, obtaining the average percentage of dead cells of each group. For microhardness evaluation, 60 root dentin samples were divided into the same tested groups (n = 10) and immersed in test irrigants for 3 min. Dentin microhardness was evaluated by Vicker test. Specific statistical analysis was made in both tests. Results showed significant lower cytotoxicity for QMix and 10% GA (P < 0.05). Moreover, all test irrigants presented similar values of microhardness than the control group (P > 0.05). In conclusion, lower GA concentration can be an alternative for final irrigation on endodontics.

Influence of ultrasonic activation on antimicrobial activity of a new final irrigant containing glycolic acid: An in vitro study

This study evaluated the influence of ultrasonic activation (US) on the antimicrobial activity of a new final irrigant containing glycolic acid (GA). Extracted teeth were used, being 70 to counting of colony-forming units (CFUs) and 35 to confocal laser scanning microscopy. Samples were inoculated with Enterococcus faecalis and divided into 7 groups: distilled water + US; 17% EDTA; Qmix; 17% GA; 17% EDTA + US; QMix + US; and 17% GA + US and kept in contact with test solution for 1 min in the groups with or no US. In the CFUs, the highest bacterial reduction was observed in QMix + US group, followed by QMix and GA + US. In the confocal evaluation, the lowest number of viable cells was observed in EDTA + US, with no statistical difference from QMix, QMix + US and GA + US (P > 0.05). The use of US improves the antimicrobial activity of EDTA and GA, being statistically different from the isolated use of these final irrigants in both evaluation tests.

Smear layer removal by passive ultrasonic irrigation and 2 new mechanical methods for activation of the chelating solution

Objectives

The aim of this study was to compare smear layer removal by conventional application (CA), passive ultrasonic irrigation (PUI), EasyClean (EC), and XP-Endo Finisher (XPF), using 17% ethylenediaminetetraacetic acid (EDTA) after chemomechanical preparation, as evaluated with scanning electron microscopy (SEM).

Materials and Methods

Forty-five single-rooted human mandibular premolars were selected for this study. After chemomechanical preparation, the teeth were randomly divided into 5 groups according to the protocol for smear layer removal, as follows: G1 (control): CA of distilled water; G2 (CA): CA of 17% EDTA; G3 (PUI): 17% EDTA activated by PUI; G4 (EC): 17% EDTA activated by EC; and G5 (XPF): 17% EDTA activated by XPF. SEM images (×1,000) were obtained from each root third and scored by 3 examiners. Data were evaluated using the Kruskal-Wallis and Dunn tests (p < 0.05).

Results

In the apical third, there were no statistically significant differences among the groups (p > 0.05). In the cervical and middle thirds, the experimental groups performed better than the control group (p < 0.05); however, G2 presented better results than G3, G4, and G5 (p < 0.05), which showed no differences among one another (p > 0.05).

Conclusions

No irrigation method was able to completely remove the smear layer, especially in the apical third. Using CA for the chelating solution performed better than any form of activation.

Influence of a glycolic acid-based final irrigant for photosensitizer removal of photodynamic therapy on the microhardness and colour change of the dentin structure

INTRODUCTION

This study aimed to evaluate the influence of glycolic acid-based final irrigant for photosensitizer removal of photodynamic therapy on the microhardness and colour change of the dentin structure.

METHODS

Eighty extracted single-rooted human incisors were used. Sample preparation and root split resulted in 160 samples, 80 samples being used for microhardness and 80 samples for colour change evaluation. In the first, PDT protocol was performed and 80 samples were randomly divided into 4 groups (n = 20), according to the final irrigation protocol: distilled water (DW); 17 % ethylenediaminetetraacetic acid (EDTA); QMix; 17 % glycolic acid (GA). Microhardness was evaluated using the Vicker tester, before and after, PDT and final irrigation protocols, calculating the percentage of microhardness reduction. In the second evaluation, PDT and final irrigation protocols were performed in the same way. Colour change was evaluated using digital spectrophotometer before and after these protocols, calculating the ΔE colour change using the CIELAB system (L*a*b* values). Specific statistical analysis was performed for both evaluations (α = 5%).

RESULTS

The highest percentage of microhardness reduction was observed in 17 % EDTA, QMix and 17 % GA groups, with no significant difference among them (p > 0.05). Furthermore, none of these protocols was effective in photosensitizer removal, and all final irrigation protocols were statically similar to control group (p > 0.05).

CONCLUSIONS

GA promotes microhardness reduction and also contributes to the colourization of dentin structure during the photosensitizer removal process, followingPDT .

Effect of different irrigating solutions with surfactants on the microhardness and smear layer removal of root canal dentin: An in vitro study

Aim:

The present in vitro study was undertaken to check the effect of the different irrigating solutions with surfactants, i.e., sodium hypochlorite-(Naocl)-Extra, chlorhexidine (CHX)-Ultra, ethylenediaminetetraacetic acid (EDTA), QMix, and BioPure MTAD on the microhardness and smear layer removal of root canal dentin.

Materials and Methods:

A total of 120 straight rooted lower premolars were collected and were randomly divided into 2 equal groups of 60 each (n = 60). The microhardness of the samples was evaluated by Vickers hardness tester and the removal of smear layer by scanning electron microscope after irrigation of the samples with the tested solutions.

Results:

CHX-Ultra showed the least microhardness reduction, and EDTA showed the maximum microhardness reduction in all the tested groups. BioPure MTAD showed the maximum removal of smear layer in the apical third, and CHX-Ultra showed the minimal smear layer removal in the apical third.

Conclusion:

During smear layer removal, irrigating solutions cause alterations in the chemical composition of dentin, which may decrease the microhardness of the root dentin causing erosion and affecting the clinical performance of the endodontically treated teeth. Irrigating solution with maximum smear layer removal with minimum changes in microhardness should be used.

In Vitro Evaluation of Antibacterial Properties and Smear Layer Removal/Sealer Penetration of a Novel Silver-Citrate Root Canal Irrigant

This study aimed at evaluating the efficacy of a novel silver-citrate root canal irrigation solution (BioAKT) on smear layer removal, sealer penetration after root canal instrumentation and antibacterial activity. Single-root teeth were endodontically treated, sealed with an epoxi-amine resin sealer and irrigated using: Group I: 5.25% sodium hypochlorite (NaOCl); Group II: silver-citrate solution (BioAKT); Group III: phosphate buffer solution (PBS); Group IV: 17% ethylenediaminetetraacetic acid (EDTA). Smear layer removal and silver deposition at the coronal, middle and apical portion of each canal were analyzed using scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Sealer penetration into dentinal tubules at coronal, middle and apical portion was assessed through dye-assisted confocal microscopy (CSM). Both SEM and CSM micrographs were evaluated by two examiners (κ = 0.86), who were blind to the irrigation regimens; scores were given according to the degree of penetration of the sealer. Data analysis included Pearson’s x² and Sidak’s multiple comparisons. Dentin discs were polished and sterilized. Enterococcus faecalis biofilms were grown using a continuous-flow bioreactor under anaerobic conditions for 72 h. Specimens were irrigated with the tested solutions, and bacterial viability was assessed using a tetrazolium salt assay (MTT). Statistical analysis included one-way ANOVA and Student’s post-hoc t-test (p < 0.05). BioAKT and EDTA were the most efficient solutions both in removing the smear layer and allowing sealer penetration. However, at the apical portion BioAKT performed significantly better compared to EDTA both in smear layer removal and sealer penetration (p < 0.05). BioAKT and NaOCl showed comparable antibacterial effect (p = 0.53). In conclusion, BioAKT represents a suitable smear layer removal agent, which allows for reliable sealer penetration at the apical portion of the root canal system and offers significant antibacterial properties.

Er,Cr:YSGG Laser-Activated Irrigation and Passive Ultrasonic Irrigation: Comparison of Two Strategies for Root Canal Disinfection

Objective: To compare the antibacterial effectiveness of 0.5% sodium hypochlorite (NaOCl) activated by the Er,Cr:YSGG laser-activated irrigation (LAI) and passive ultrasonic irrigation (PUI) against a 10-day-old intracanal Enterococcus faecalis biofilm. Background: LAI and PUI are regarded as alternative methods to release the irrigant in the inner regions of the root canal system achieving enhanced cleaning ability. Nevertheless, little evidence regarding the activation of low concentrations of NaOCl has been reported. Materials and methods: Seventy-two single-rooted teeth were instrumented, inoculated (E. faecalis ATCC 29212), and incubated for 10 days to allow biofilm formation. Specimens were randomly divided into six groups (n = 12 each): (1) 0.5% NaOCl+Er,Cr:YSGG LAI, (2) saline+Er,Cr:YSGG LAI, (3) 0.5% NaOCl+PUI, (4) saline+PUI, (5) positive control (no treatment), and (6) negative control (no bacteria). The activation time was distributed as follows: 30 sec of activation, followed by a rest phase of 30 sec, and ending with 30 sec of activation. The number of bacterial survivors was determined by plate counting. Results: Both irrigation regimens LAI and PUI reduced the number of colony-forming unit. Moreover, LAI +0.5% NaOCl and the rest of groups significantly differ (p < 0.001 for all comparisons). Conclusions: Er,Cr:YSGG LAI proved to be more effective than PUI in enhancing the antimicrobial activity of 0.5% NaOCl against 10-day-old intracanal E. faecalis biofilms.

Effect of ultrasonic activation on calcium ion quantification, smear layer removal, and canal cleaning efficacy of demineralizing irrigants

Background

Effective removal of smear layer ensures better penetration of irrigants ensuring root canal disinfection and has the potential of sealing dentinal tubules during obturation.

Aim

The aim of this study is to evaluate the canal cleaning efficacy and calcium ion liberation with the use of demineralizing irrigants, namely, 17% ethylenediaminetetraacetic acid (EDTA), 7% maleic acid, and 10% citric acid with or without ultrasonic (US) activation.

Materials and Methods

Crowns of 62 extracted maxillary central incisors were decoronated and root canals prepared. Based on the final irrigant teeth were divided into following groups (n = 10), namely, 10% citric acid, 7% maleic acid, 17% EDTA, and 10% citric acid with US activation, 7% maleic acid with US activation, and 17% EDTA with US activation. Irrigants were subjected to inductively coupled plasma-atomic emission spectroscopy followed by debris scoring and scanning electron microscope analysis.

Statistical Analysis

One-way analysis of variance with the Bonferroni's correction for multiple testing was employed.

Results

About 10% citric acid with US activation liberated the highest calcium ions and removed the maximum smear layer.

Conclusions

Citric acid with US activation is a potentially effective irrigation regimen with sodium hypochlorite.

Effects of Different Irrigation Solutions and Protocols on Mineral Content and Ultrastructure of Root Canal Dentine

Introduction

The aim of this study was to evaluate the effect of different irrigating solutions and irrigation protocols on the chemical and physical structure of root dentin.

Materials and Methods

Thirty extracted single-rooted human teeth were selected and then distributed into the following treatment groups (n=10): G1, saline solution (0.9% NaCl); G2, 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G3, 2.5% NaOCl + 9% Etidronate (HEBP) + 2.5% NaOCl; G4, mixture of 5% NaOCl + 18% HEBP; G5, 2.5% NaOCl + 17% EDTA + 0.9% NaCl, and G6, 2.5% NaOCl + 9% HEBP + 0.9% NaCl. The ultrastructure of dentin was characterized through scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS) determined the chemical composition in terms of the calcium (Ca), phosphorus (P), magnesium (Mg) and potassium (K) content and the Ca/P ratio; and the crystalline phase was analyzed by x-ray diffraction (XRD). A descriptive analysis was performed on the ultrastructure and the crystallography data of dentin. Data analysis included a chemical composition analysis of variance (one-way ANOVA) and a subsequent multiple comparison test (Tukey's test).

Results

Except for the control group, all groups showed morphological changes upon visualization with SEM. For EDS, G2 and G5 showed significant mineral loss and changes in the Ca/P ratio (P<0.05); the highest values of Ca and P were observed in G3, G4 and G6.

Conclusion

All the irrigating solutions and irrigation protocols tested promoted changes in the morphology and physical and chemical composition of the dentin. However, no significant differences were observed crystallographically.

Effects of EDTA gel and chlorhexidine gel on root dentin permeability

The aim of this study was to evaluate the effect of 24% ethylenediaminetetraacetic acid (EDTA) gel and 2% chlorhexidine gel (CHX) in dentin permeability and smear layer removal from root canals instrumented with NiTi rotary system using histochemical staining and scanning electron microscopy (SEM) analysis. Overall, 43 premolars were classified into two experimental groups, EDTA (n = 20) and CHX (n = 20), and a negative control (NC) (n = 3). All specimens were instrumented and the irrigant solutions were used after each file change. The EDTA group received a final rinse with 5-ml 1% NaOCl followed by a 5-ml 0.9% saline solution; the CHX group received a final rinse with 10-ml 0.9% saline solution; and the negative control group received a final rinse with only 0.9% saline solution. Fifteen teeth from each group were prepared for histochemical staining and evaluation of dentin permeability using the image-scanning software Axion Vision (v.4.8.2). Five remaining teeth were prepared for analysis using SEM for morphological analysis. The study found that 24% EDTA gel increased the permeability of dentin in all thirds evaluated and also demonstrated an increased cleaning ability, with dentinal walls free of smear layer and open dentinal tubules, as compared to 2% CHX gel. It was concluded that EDTA was efficient in cleaning the dentinal tubules and increased dentin permeability.

Efficacy of photon-initiated photoacoustic streaming on apically extruded debris with different preparation systems in curved canals

AIM

To determine the effect of photon-initiated photoacoustic streaming (PIPS) on the extrusion of debris using multiple-file (ProTaper Next-PTN) and single-file (One Shape-OS) continuous rotary systems in curved canals in human molar teeth.

METHODOLOGY

Sixty extracted maxillary first molar teeth with curved mesial roots, mature apices and of similar lengths were selected. Teeth having canals with apical diameters larger than size 15 were discarded. The teeth were randomly divided into four experimental groups (n = 15 teeth per group) according to the file used and irrigation systems: (i) OS with PIPS with a 2940 nm Er:YAG laser (0.3 W, 15 Hz, and 20 mJ), (ii) OS with conventional needle irrigation (CNI) with a 27-G needle, (iii) PTN with PIPS and (iv) PTN with CNI. The PIPS and CNI was applied during each file change for 20 s. Total irrigation and activation time was 1 min, and a total volume of 7.5 mL of bidistilled water was used as the irrigant. The apically extruded debris was collected into pre-weighed Eppendorf tubes. The tubes were then stored in an incubator at 70 °C for 5 days. The weight of dry extruded debris was assessed by subtracting the initial weight of the tube from the final weight. The results were analysed statistically using one-way analysis of variance and Tukey's post hoc tests. Bonferroni correction was used to compare the groups.

RESULTS

The PIPS irrigation technique was associated with significantly more debris extrusion than the CNI system (P < 0.05). The single-file (One Shape-OS) rotary system was associated with more debris than the multiple-file (ProTaper Next-PTN) rotary systems when the same irrigation system was used (P > 0.05). The total amount of debris extruded apically by PIPS activation was significantly greater than that by CNI (P < 0.05).

CONCLUSIONS

All file and irrigation systems extruded debris apically. PIPS activation was associated with significantly more extrusion debris in curved canals compared with no activation.

A Comparative Study of the Quality of Apical Seal in Resilon/Epiphany SE Following Intra canal Irrigation With 17% EDTA, 10% Citric Acid, And MTAD as Final Irrigants - A Dye Leakage Study Under Vacuum

INTRODUCTION

Adequate apical sealing ability of the root canal filling material is an essential requisite for a successful endodontic therapy. Various endodontic irrigants are used for the removal of smear layer before obturating with a solid core material, thereby, reducing microleakage and improving apical seal. Resilon, a synthetic material was developed as an alternative to replace the conventional gutta-percha (standard root canal filling material) and traditional sealers for the obturation of endodontically treated teeth.

AIM

To evaluate and compare in-vitro, the post obturation apical seal obtained with Resilon /Epiphany SE (Self Etch) sealer following irrigation with 17% Ethylenediamine Tetra-Acetic Acid (EDTA), 10% citric acid, and MTAD (a mixture of doxycycline, citric acid, and a detergent, Tween 80), as final irrigants in combination with Sodium hypochlorite (NaOCl) using dye leakage under vacuum method.

MATERIALS AND METHODS

Fifty five single rooted human maxillary central incisors were subjected to root canal instrumentation. Based on the final irrigation solution, samples were divided into three experimental groups (n=15); (I) 17% EDTA + 1.3% NaOCl, (II) 10% citric acid + 1.3% NaOCl, (III) MTAD + 1.3% NaOCl and two control groups (positive and negative) with 0.9% normal saline as a final irrigant. The samples were obturated with resilon/epiphany SE sealer according to manufacturer instructions and placed in 2% rhodamine B dye solution under vacuum pressure for 30 minutes and allowed to remain in the dye for seven days. All samples were then longitudinally split and examined for dye leakage under stereomicroscope and the data were statistically analysed using one-way ANOVA and post hoc tukey test.

RESULTS

Statistically significant difference (p=0.001) was observed in the mean apical leakage between the experimental and the control groups. However, there was no significant difference (p>0.05) observed in the mean apical leakage amongst the three experimental groups.

CONCLUSION

17% EDTA, 10% citric acid, and MTAD were equally effective in achieving the post-obturation apical seal with resilon/epiphany SE sealer when used as a final irrigant in combination with NaOCl.

Effect of Laser-Activated Irrigations on Smear Layer Removal from the Root Canal Wall

OBJECTIVE

The purpose of this study was to evaluate the effect of laser-activated irrigations (LAI) by using the Erbium: Yttrium Aluminum Garnet (Er:YAG) laser and the Erbium Chromium: Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) laser on removing smear layer (SL) from the root canal wall.

BACKGROUND DATA

LAI has been proposed as an adjuvant to conventional protocols of endodontic treatment to enhance the disinfection, which is a promising protocol for SL removal.

MATERIALS AND METHODS

SL was generated by preparing the root canals of extracted human teeth to a #35/.04 M3 instrument. The SL then received treatments of one of the following: (A) NaOCl, 5.25% sodium hypochlorite (NaOCl) for 60 sec; (B) EDTA, 17% ethylenediamine tetraacetic acid (EDTA) for 60 sec; (C) NaOCl+EDTA, NaOCl, and EDTA for 30 sec each; (D) LAI+NaOCl, LAI with NaOCl for 60 sec; (E) LAI+EDTA, LAI with EDTA for 60 sec; and (F) LAI+NaOCl+EDTA, LAI with NaOCl, and EDTA for 30 sec each. Efficacies of SL removal were evaluated by using a five-grade scoring system under scanning electron microscopy.

RESULTS

The laser activations significantly enhanced the effect of the NaOCl, EDTA, and NaOCl+EDTA irrigations in removing SL. The efficacies of SL removal were presented in a descending order of LAI+NaOCl+EDTA, LAI+EDTA>LAI+NaOCl, NaOCl+EDTA>EDTA>NaOCl.

CONCLUSIONS

Among the treatments, the LAI+NaOCl+EDTA was the most effective protocol in removing SL from the entire root canal wall, which may be effective for root canal treatment.

Effect of two contemporary root canal sealers on root canal dentin microhardness

Background

Successful root canal treatment depends on proper cleaning, disinfecting and shaping of the root canal space. Pulpless teeth have lower dentin microhardness value compared to that of vital teeth. A material which can cause change in dentin composition may affect the microhardness. Thus the aim of this study was to evaluate and compare the effect of two root canal sealers on dentin microhardness.

Material and Methods

Forty two single rooted teeth were selected and divided into 3 equal groups; Apexit, iRootSP and control groups (n=14) Each group was then divided into 2 subgroups according to the post evaluation period; 1 week and 2 months (n=7). Root canal procedure was done in the experimental groups and obturation was made using either; Apexit, iRootSP or left unprepared and unobturated in the control group. Roots were sectioned transversely into cervical, middle and apical segments. The three sections of each root were mounted in a plastic chuck with acrylic resin. The coronal dentin surfaces of the root segments werepolished. Microhardness of each section was measured at 500 µm and 1000 µm from the canal lumen.

Results

Four way-ANOVA revealed that different tested sealer materials, canal third, measuring distance from the pulp and time as independent variables had statistically non significant effect on mean microhardness values (VHN) at p≤0.001. Among iRootSP groups there was a statistically significant difference between iRoot SP at coronal root portion (87.79±17.83) and iRoot SP at apical root portion (76.26±9.33) groups where (p=0.01). IRoot SP at coronal canal third had higher statistically significant mean microhardness value (87.79±17.83) compared to Apexit at coronal third (73.61±13.47) where (p=0.01).

Conclusions

Root canal sealers do not affect dentin microhardness.

Key words:Root canal, dentin, sealers, microhardness, bioceramic.

The use of auxiliary devices during irrigation to increase the cleaning ability of a chelating agent

Objectives

This study investigated the cleaning ability of ultrasonically activated irrigation (UAI) and a novel activation system with reciprocating motion (EC, EasyClean, Easy Equipamentos Odontológicos) when used with a relatively new chelating agent (QMix, Dentsply). In addition, the effect of QMix solution when used for a shorter (1 minute) and a longer application time (3 minutes) was investigated.

Materials and Methods

Fifty permanent human teeth were prepared with K3 rotary system and 6% sodium hypochlorite. Samples were randomly assigned to five groups (n = 10) according to the final irrigation protocol: G1, negative control (distilled water); G2, positive control (QMix 1 minute); G3, QMix 1 minute/UAI; G4, QMix 1 minute/EC; G5, QMix 3 minutes. Subsequently the teeth were prepared and three photomicrographs were obtained in each root third of root walls, by scanning electron microscopy. Two blinded and pre-calibrated examiners evaluated the images using a four-category scoring system. Data were statistically analyzed using Kruskal-Wallis and Dunn tests (p < 0.05).

Results

There were differences among groups (p < 0.05). UAI showed better cleaning ability than EC (p < 0.05). There were improvements when QMix was used with auxiliary devices in comparison with conventional irrigation (p < 0.05). Conventional irrigation for 3 minutes presented significantly better results than its use for 1 minute (p < 0.05).

Conclusions

QMix should be used for 1 minute when it is used with UAI, since this final irrigation protocol showed the best performance and also allowed clinical optimization of this procedure.

Effect of application time of maleic acid on smear layer removal and mechanical properties of root canal dentin

OBJECTIVES

To evaluate the effect of maleic acid (MA) on the cleaning efficacy and mechanical properties of root canal dentine with respect to different time exposure.

MATERIALS AND METHODS

One hundred and eighty single-canal premolars were instrumented with rotary-files and then randomly assigned to test groups receiving 7% MA for 30 s, 45 s, 1 min, or 3 min or to control groups treated with 0.9% saline or 17% ethylenediaminetetraacetic acid for 45 s. The micro-hardness, nano-hardness and elastic modules were measured before and after treatment, while the amount of smear and erosion in the coronal, middle and apical thirds in root canal were evaluated by scanning electron microscopy, finally, the fracture strength was assessed by vertical root fracture testing.

RESULTS

The efficacy of smear layer removal increased with increasing MA application time. The largest effect was observed at 45 s, even in the apical third, whereas the treatment for 1 min resulted in irreversible erosion of the dentine surface. The micro-hardness and nano-indentation testing confirmed that the micro- and nano-scale mechanical properties were significantly decreased after MA application for 1 min. Furthermore, the specimens treated with MA for 3 min presented the lowest fracture resistance among all groups. In contrast, the 45 s treatment appeared to increase the fracture resistance of the tooth.

CONCLUSIONS

The cleaning efficacy and mechanical properties of root canal dentine varied with MA exposure time. The application of MA for 45 s was found to be the most promising for clinical use.

Comparative Analysis of Dentinal Erosion after Passive Ultrasonic Irrigation versus Irrigation with Reciprocating Activation: An Environmental Scanning Electron Study

INTRODUCTION

The aim of this study was to assess ex vivo the erosive effects of passive ultrasonic irrigation versus irrigation with reciprocating activation on the dentinal surface of the root canal at 3 predetermined levels using environmental scanning electron microscopy.

METHODS

Ten roots of mandibular premolars were prepared using the ProTaper Universal system (Dentsply Maillefer, Ballaigues, Switzerland). The specimens were embedded in flasks cleaved longitudinally, and indentations were made 3.0, 6.0, and 9.0 mm from the apex. The specimens in the control group (n = 10) were cleaned in an ultrasonic bath containing 2.5% sodium hypochlorite and 17% EDTA and then dried. Then, environmental scanning electron microscopic images were obtained at magnification × 800. The specimens were then reassembled in their flasks, and the NaOCl and EDTA solutions were activated according to the conditions established for the experimental groups (ie, the passive ultrasonic irrigation group [n = 5] and the EasyClean (Easy Equipamentos Odontológicos, Belo Horizonte, MG, Brazil) group, irrigation with reciprocating activation with the EasyClean instrument [n = 5]). The specimens of both experimental groups were analyzed in the same manner as in the control group. Analysis of the dentinal surface topography was conducted using the 3D Roughness Reconstruction program (Phenom-World BV, Eindhoven, the Netherlands) as a means for assessing erosion. The data were evaluated by means of the Kruskal-Wallis, Student-Newman-Keuls, and Mann-Whitney tests.

RESULTS

In the EasyClean group, the degree of dentinal erosion at 3.0 mm was significantly higher than at 9.0 mm. In the other comparisons, there was no statistically significant difference (P < .05).

CONCLUSIONS

The final irrigation techniques tested were equivalent in relation to the degree of erosion caused to the dentinal surface.

Effects of QMix and ethylenediaminetetraacetic acid on decalcification and erosion of root canal dentin

The aim of this study was to evaluate the effect of initial NaOCl on the decalcification and erosion ability of EDTA and QMix. Sixty-maxillary-incisors were bisected longitudinally and the tooth-halves were used. The experiment was conducted in two-sets. In set-I, 80-tooth halves were treated in the presence or absence of initial NaOCl and EDTA. In set-II, 40-tooth halves were immersed in NaOCl and QMix. After each treatment, calcium-ion release was determined with flame photometry. The erosion was imaged using SEM. Initial NaOCl led to concentration- and time-dependent increase in calcium removal effect of 17% EDTA (p < .05). The rate of calcium removal and root canal wall erosion was considerably more severe with the use of 5% NaOCl for 3 min (p < .05). QMix as a final solution showed less decalcification and erosion than 17% EDTA when used 5% NaOCl as an initial irrigant (p < .05). Optimizing the concentration and application time of NaOCl can decrease the decalcification effect of chelating agents.

Evaluating the Effect of CPP-ACP as a Final Irrigant in Improving the Micro-Hardness of Erosive Root Dentin and its Influence on the Bond Strength of Self Etch Resin Sealer - An In-vitro Study

INTRODUCTION

Smear layer removal from the root canal wall involves the use of 17% EDTA and 5.25% sodium hypochlorite, which thereby improves the adhesion of obturating materials to root dentin. But these chemical irrigants have shown to decrease micro hardness, increase roughness, cause erosion and reduce the root dentin fracture toughness. To combat these adverse effects, studies can be focussed on the remineralisation of the erosive root dentin and this novel idea has been utilized in the present study.

AIM

To evaluate the micro hardness of erosive root dentin when Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) was used as a final irrigant and its influence on resin sealer bonding tested by push-out bond strength method.

MATERIALS AND METHODS

Sixty extracted maxillary incisors were divided into three groups based on the final irrigation protocol. Group 1-normal saline, Group 2-17% EDTA (Ethylene Diamine Tetraacetic Acid) + 5.25% NaOCl (Sodium Hypochlorite), Group 3 - 17% EDTA + 5.25% NaOCl + CPP-ACP; each group was divided into two subgroups. Half the specimens of each group were evaluated for Vicker's micro hardness test after the treatment. In continuation with the above methodology the remaining specimens were tested for push-out bond strength after obturation of the specimens with self etch adhesive resin sealer and conventional 6% gutta percha cones.

RESULTS

Micro hardness was statistically analysed using Kruskal Wallis test and push-out bond strength was evaluated using Mann Whitney test and paired t-test. CPP-ACP treated group showed increased micro hardness (p<0.05). There was no statistically significant difference between the push-out bond strength values between group EDTA + NaOCl group and EDTA + NaOCl + CPP-ACP group.

CONCLUSION

Within the limitations of this study it can be concluded that, CPP-ACP improved the micro hardness of erosive root dentin and is not affecting its bond strength. Therefore, CPP-ACP may be used before bonding procedures for promoting remineralization of root dentin.

1064-nm Nd:YAG and 980-nm Diode Laser EDTA Agitation on the Retention of an Epoxy-Based Sealer to Root Dentin

Root canal irrigants are used to minimize the negative effects of smear layer on endodontic sealer retention. The aim of this study was to evaluate the efficacy of agitation of 17% ethylenediaminetetraacetic acid (EDTA) with ultrasonic, 1064-nm Nd:YAG and 980-nm diode laser on the retention of an epoxy-based sealer to the root canal walls. Forty single-rooted bovine teeth were instrumented with ProTaper rotary system and divided into four groups according to the final irrigation protocol (n = 10): (1) 17% EDTA (control); (2) 17% EDTA with 50-s ultrasonic agitation; (3) 17% EDTA with 50-s diode laser (2-W) agitation; and (4) 17% EDTA with 50-s Nd:YAG (1.5-W) laser agitation. After endodontic filling with gutta-percha F5 master cone and Sealer 26, the roots were sectioned at the cervical, middle, and apical root thirds to obtain 1.5-mm slices. Push-out tests were performed using a universal testing machine at a 1 mm/min crosshead speed. Data were analyzed using two-way ANOVA and Tukey's tests (α=0.05). Apical root thirds had significant higher retention values than cervical and middle thirds (p < 0.05). EDTA with 1064-nm Nd:YAG or 980-nm diode laser presented the highest retention values and was significantly different from EDTA with ultrasonic agitation and EDTA only (p < 0.05). Adhesive failures were predominant to EDTA only group. Mixed failures were predominant to all agitation groups. 1064-nm Nd:YAG and 980-nm diode laser EDTA agitation enhanced the retention of the epoxy-based sealer to the root canal walls compared with that due to EDTA only or EDTA with ultrasonic agitation.

Effectiveness of laser-assisted irrigation and passive ultrasonic irrigation techniques on smear layer removal in middle and apical thirds

The purpose of this study was to investigate the evaluation of laser-assisted irrigation (LAI) on the removal of the smear layer as compared to passive ultrasonic irrigation (PUI). Forty-eight single-rooted, upper-central incisor teeth were selected and prepared with ProTaper rotary instruments up to size #40 (F4) at the working lengths. Specimens were divided into four groups, as follows: (a) PUI with 5 mL of 2.5% NaOCl for 60 s; (b) PUI with 2.5 mL of 17% EDTA and 2.5 mL of 2.5% NaOCl each for 30 s; (c) LAI with 5 mL of 2.5% NaOCl for 60 s; and (d) LAI with 2.5 mL of 17% EDTA and 2.5 mL of 2.5% NaOCl each for 30 s. In the PUI groups, the ultrasonically activated file was inserted 1 mm short of the working length, but in the LAI groups, the fiber tip was applied into the pulp chamber. LAI in the pulp chamber with the combination of 17% EDTA and 2.5% NaOCl removed more of the smear layer than the other groups (p < 0.018). LAI in the pulp chamber with the combination of 2.5% NaOCl and 17% EDTA better removed the smear layer than LAI applied similarly but without EDTA or PUI with the same NaOCl and EDTA combinations using an ultrasonically activated file inserted 1 mm short of the working length.

Efficacy of etidronic acid, BioPure MTAD and SmearClear in removing calcium ions from the root canal: An in vitro study

OBJECTIVE

The purpose of this study was to quantify the amount of calcium ions removed from the root canal by etidronic acid (HEBP), BioPure MTAD, and SmearClear using atomic absorption spectrophotometer.

MATERIALS AND METHODS

Fifty (n = 50) freshly extracted human mandibular premolar teeth were collected and decoronated at the cementoenamel junction. The canals were prepared in a crown down fashion using the rotary system and copiously irrigated with 1.0% sodium hypochlorite. All specimens were rinsed with the deionized water. Based on the type of chelating agent used, the samples (n = 10) were randomly divided into five (four test and one negative control) groups. Accordingly, Group I - 9% HEBP, Group II - 18% HEBP, Group III - SmearClear, Group IV - BioPure MTAD, and Group V - normal Saline. Subsequent to irrigation, the solution was collected in a test tube and subjected to atomic absorption spectrophotometer for the quantification of calcium ions removed from the root canal.

RESULTS

The mean concentration of calcium ions removed from the root canal (mean ± standard deviation) in all groups (I-V) were 13.32 ± 0.54 μg/ml, 16.36 ± 0.27 μg/ml, 20.04 ± 0.24 μg/ml, 18.15 ± 0.39 μg/ml, and 8.74 ± 0.49 μg/ml, respectively.

CONCLUSIONS

SmearClear was the most effective agent for the removal of calcium ions from the root canal. Hence, its combined use with an organic solvent can be recommended for efficient smear layer removal.

The effect of final irrigation on the penetrability of an epoxy resin-based sealer into dentinal tubules: a confocal microscopy study

INTRODUCTION

The aim of this study was to compare the effect of QMix, BioPure MTAD, 17 % EDTA, and saline on the penetrability of a resin-based sealer into dentinal tubules using a confocal laser scanning microscope (CLSM) and to describe the cleaning of root canal walls by SEM.

METHODS

Eighty distobuccal roots from upper molars were selected and randomly divided into four groups (n = 20) before root canal preparation according to the solution used in the final rinse protocol (FRP): QG (QMix), MG (BioPure MTAD), EG (17 % EDTA), and CG (control group: saline). Ten roots of each group were prepared for SEM, and images (×2000) from the canal walls were acquired. The remaining canals were filled with a single gutta-percha cone and AH Plus with 0.1 % Rhodamine B. The specimens were horizontally sectioned at 4 mm from the apex, and the slices were analyzed in CLSM (×10). Sealer penetration was analyzed with Adobe Photoshop software.

RESULTS

QG and EG presented similar amounts of sealer penetration (P > .05). MG and CG presented the lowest penetrability values (P < .05). The best results for smear layer removal of the apical third of the root canal were achieved by the QG and EG groups when compared with MG and CG (P < .05).

CONCLUSIONS

Seventeen percent EDTA and QMix promoted sealer penetration superior to that achieved by BioPure MTAD and saline.

CLINICAL RELEVANCE

Despite studies have not confirmed the relationship between sealing ability of endodontic sealers and their penetration in dentinal tubules, sealer penetration assumes importance, since endodontic sealers, unlike gutta-percha, are able to penetrate in dentinal tubules, isthmus, and accessory canals, filling the root canal system.

Effect of Peracetic Acid as A Final Rinse on Push Out Bond Strength of Root Canal Sealers to Root Dentin

BACKGROUND

Smear layer which was formed during the instrumentation of root canals hinders the penetration of root canal sealers to root dentin and affect the bond strength of root canal sealers to root dentin. Final irrigant such as demineralizing agents are used to remove the inorganic portion of the smear layer. In the present study, peracetic acid used as a final rinse, to effect the bond strength of root canal sealers to root dentin.

AIM

The purpose of the present study was to evaluate the efficacy of peracetic acid as a final irrigant on bond strength of root canal sealers to root dentin.

MATERIALS AND METHODS

Sixty six freshly extracted human single rooted mandibular premolars were used for this study. After decoronation the samples were instrumented with Protaper upto F3 and irrigated with 5.25% NaOcl. The teeth were then divided into three groups based on final irrigant used: Group-1(control group) Canals were irrigated with distilled water. Group-2: Canals were irrigated with peracetic acid. Group-3: Canals were irrigated with smear clear. Each group was further divided into three subgroups (n=30) based on the sealer used to obturate the canals. Subgroup-1: kerr, Subgroup-2: Apexit plus, Subgroup-3: AH PLUS. Each sealer was mixed and coated to master cone and placed in the canal. The bonding between sealer and dentin surface was evaluated using push out bond strength by universal testing machine. The mean bond strength values of each group were statistically evaluated using Two-way ANOVA followed by Tukey post-hoc test.

RESULTS

Significant difference was found among the bond strength of the sealers. But, there is no statistically significant difference between the groups irrigated with peracetic acid and smear clear compared to control group. AH Plus showed highest bond strength irrespective of the final irrigant used.

CONCLUSION

Peracetic acid when employed as final irrigant improved the bond strength of root canal sealers compared to control group but not statistically significant than smear clear.

The effect of the temperature changes of EDTA and MTAD on the removal of the smear layer: a scanning electron microscopy study

The purpose of this study was to determine the effectiveness of EDTA and MTAD at different temperatures as a final irrigant to remove the smear layer after the use of 5.25% NaOCl. Seventy-eight human mandibular premolars with single straight canal were prepared by a crown-down technique using rotary 0.06 taper nickel-titanium files. Final irrigation was performed with EDTA and MTAD at different temperatures. The removal of the smear layer in the coronal, middle and apical level of each canal was examined under scanning electron microscope. No difference was found between the EDTA and MTAD at 4°C, 25°C, and 37°C temperatures regardless of the canal level (coronal, middle and apical) (P = 0.286). In EDTA-25, EDTA-37, MTAD-25, and MTAD-37 groups, the difference among the coronal, middle, and apical levels were statistically no significant (P > 0.05). Our findings showed that EDTA and MTAD at 25°C and 37°C are more effective than EDTA and MTAD at 4°C even in the apical level.

Evaluation of different irrigating solutions on smear layer removal of primary root dentin

AIM

To evaluate the efficacy of ethanolic extract of Salvadora persica (S. persica) and BioPure MTAD (a mixture of a tetracycline isomer, an acid, and a detergent) in removing the intracanal smear layer of primary teeth.

MATERIALS AND METHODS

The root canal of 40 extracted human primary anterior teeth were cleaned, shaped and grouped into experimental (n = 30) and control (n = 10). The root canals of the positive (n = 5) and the negative control (n = 5) were irrigated for 3 minutes with 5 ml of 17% ethylenediaminetetraacetic acid (EDTA) or saline respectively. The canals in the experimental groups were irrigated for 3 minutes with 5 ml of 1 mg/ml ethanolic extract of S. persica (n = 15) or BioPure MTAD (n = 15) and then flushed with 2 ml of saline. The presence or absence of smear layer at the coronal and middle portion of each canal were examined under a scanning electron microscope (SEM).

RESULTS

A significant difference (p = 0.004) in smear layer removal between S. persica and MTAD at the middle third of the canal was observed. MTAD solution was as effective as 17% EDTA in removing the smear layer.

CONCLUSION

MTAD was significantly more effective in smear layer removal than S. persica solution at the middle third of the canal wall.

CLINICAL SIGNIFICANCE

Both tested irrigant solutions have the ability to remove the intracanal smear from primary root dentin following cleaning and shaping of the root canal and could be an alternative to EDTA.

Efficacy of Two Irrigants Used with Self-Adjusting File System on Smear Layer: A Scanning Electron Microscopy Study

Mechanical instrumentation of root canals produces a smear layer that adversely affects the root canal seal. The aim of this study was to evaluate efficacy of MTAD and citric acid solutions used with self-adjusting file (SAF) system on smear layer. Twenty-three single-rooted human teeth were used for the study. Canals were instrumented manually up to a number 20 K file size. SAF was used to prepare the root canals. The following groups were studied: Group 1: MTAD + 5.25% NaOCl, Group 2: 20% citric acid + 5.25% NaOCl, and Group 3: Control (5.25% NaOCl). All roots were split longitudinally and subjected to scanning electron microscopy. The presence of smear layer in the coronal, middle, and apical thirds was evaluated using a five-score evaluation system. Kruskal-Wallis and Mann-Whitney U tests were used for statistical analysis. In the coronal third, Group 2 exhibited the best results and was statistically different froms the other groups (P < 0.05). There was not a significant difference among the three thirds of groups according to in-group comparisons (P > 0.05). The solutions used in Group 1 and 2 could effectively remove smear layer in most of the specimens. However, citric acid was more effective than MTAD in the three thirds of the canal.

Ethylenediaminetetraacetic acid in endodontics

Ethylenediaminetetraacetic acid (EDTA) is a chelating agent can bind to metals via four carboxylate and two amine groups. It is a polyamino carboxylic acid and a colorless, water-soluble solid, which is widely used to dissolve lime scale. It is produced as several salts, notably disodium EDTA and calcium disodium EDTA. EDTA reacts with the calcium ions in dentine and forms soluble calcium chelates. A review of the literature and a discussion of the different indications and considerations for its usage are presented.

Comparison of cleaning efficiency and deformation characteristics of Twisted File and ProTaper rotary instruments

Objective:

The objective of the following study is to compare the cleaning efficiency and deformation characteristics of Twisted File (TF) and ProTaper (PT) nickel-titanium rotary instruments in root canal preparation.

Materials and Methods:

A total of 52 canals from 26 extracted maxillary first molars were randomly assigned into two groups of each including 13 mesiobuccal and 12 distobuccal (DB) canals. Two DB canals were as blank controls. After preparation with TF and PT, we recorded the preparation time and evaluate the amounts of debris and smear layer at apical, middle and coronal canals under scanning electron microscopy (SEM). Three cross-sections of canals at 3 mm, 5 mm and 7 mm from the apex foramens were scanned before and after preparation under micro-computed tomography. Changes of the cross-section area (CSA) at the three levels were calculated with Photoshop CS4. File deformation was also investigated under SEM. Two groups were statistically compared with Mann-Whitney test and independent sample t-test.

Results:

Less debris and smear layer were found in coronal regions of canals prepared with TF (P = 0.006, P = 0.001, respectively). TF group displayed more CSA change than PT group (P = 0.045) at cross-sections of 5 mm from the apex foramens and took significantly less preparation time than PT group did (P = 9.06 × 10⁻²⁸). All five TF files without obvious micro-cracks and two out of 25 PT files with many micro-cracks showed visible unwound deformation.

Conclusion:

Neither TF nor PT achieves complete cleanliness of canal walls. Their deformation features might indicate different fracture resistance. TF single-file technique would substantially shorten the time of root canal preparation.

Effectiveness of different intracanal irrigation techniques in removing intracanal paste medicaments

This study aimed to compare the effectiveness of different intracanal irrigation techniques in removing intracanal medicaments prior to obturation. A total of 168 single roots were prepared with ProTaper® rotary files and medicament pastes applied (Ledermix®, Odontopaste®, Doxypaste and Pulpdent®), left in for 2 weeks, then removed using filing followed by one of four methods: irrigation with an open-ended notched irrigation needle (Appli-Vac) either at the working length or 5 mm from the canal orifice, or the Max-I-probe or EndoActivator® at the working length. Following the removal of medicaments, the roots were split into two and the internal surfaces photographed, for digital image analysis of the overall percentage of residual medicament. With the exception of canals irrigated 5 mm apical to the root canal orifice, all four irrigation techniques achieved an average of 95% for removal of Ledermix®, Odontopaste® and Doxypaste. Calcium hydroxide paste was the most difficult medicament to remove, with no difference between irrigation techniques. Up to 27% of the Pulpdent® material remained after irrigation. No irrigation technique could completely remove all traces of medicaments. The position of the irrigational needle and the type of medicament used are key factors, which influence the effectiveness of irrigation in removing medicaments.

A comparative scanning electron microscopy evaluation of smear layer removal from teeth with different irrigation solutions and lasers

The aim of this study was to evaluate the efficacy of smear layer removal from teeth following root canals using lasers (Er:YAG and Nd:YAG), NaOCl, 17% EDTA, and MTAD by scanning electron microscopy (SEM). Root canals were irrigated with 3 mL of 5.25% NaOCl after each file. Teeth were randomly divided into five groups. In the final irrigation, canals were irrigated with 5.25% NaOCl (Group 1, control), 17% EDTA (Group 2), or BioPure MTAD (Group 3). Laser groups were irradiated with Er:YAG laser (1.8 W, 120 mJ, 15 Hz) (Group 4) or Nd:YAG laser (1 W, 100 mJ, 15 Hz) (Group 5). The smear layer at the apical, middle, and coronal thirds of each root canal was imaged using SEM. Smear layer removal by EDTA was the most effective in all regions. The difference between EDTA and MTAD was statistically significant in the coronal and middle (p < 0.05), but not the apical (p > 0.05), regions. The difference between the control and laser groups was not statistically significant (p > 0.05). In all regions, the difference between 17% EDTA-MTAD and the control-laser groups was statistically significant (p < 0.05). Although improvement was observed in removal of the smear layer using alternative materials and techniques, application of a combination of EDTA and NaOCl remains an effective technique.