Biosynthesized silver nanoparticles using Bacillus amyloliquefaciens; Application for cytotoxicity effect on A549 cell line and photocatalytic degradation of p-nitrophenol

Antimicrobial, Quorum Sensing Inhibition, and Anti-Cancer Activities of Silver Nanoparticles Synthesized from Kenyan Bacterial Endophytes of Teclea nobilis

Untapped bioactive compounds from microbial endophytes offer a promising solution to counter antimicrobial and chemotherapeutic drug resistance when complexed as silver nanoparticles (AgNPs). AgNPs were biosynthesized using cell-free supernatants from endophytic Streptomyces sp. KE4D and Bacillus safensis KE4K isolated from the Kenyan medicinal plant Teclea nobilis, following fermentation in three different media. Bacterial extracts were analyzed using gas chromatography-mass spectrometry. AgNPs were characterized using Fourier-transform infrared spectroscopy and high-resolution transmission electron microscopy. Antimicrobial activity was assessed using agar well diffusion assays, and quorum sensing inhibition (QSI) was investigated using Chromobacterium violaceum. Anti-cancer potential was evaluated against breast (MCF-7) and prostate cancer (DU-145) cell lines using MTT assays. AgNPs were 5-55 nm in size, with KE4D AgNPs being spherical and KE4K AgNPs exhibiting various shapes. Cyclopropane acetic acids and fatty acids were identified as possible capping agents. Medium-dependent antimicrobial activity was observed, with medium Mannitol and medium 5294 AgNPs displaying stronger activity, particularly against Gram-negative indicators. KE4D medium 5294 AgNPs demonstrated 85.12% violacein inhibition at 140 µg/mL and better QSI activity, whilst KE4K AgNPs were better antimicrobials. The AgNPs IC50 values were <3.5 µg/mL for MCF-7 and <2.5 µg/mL for DU-145 cells. The bioactivity of biosynthesized AgNPs is influenced by the bacterial isolate and fermentation medium, suggesting that AgNP synthesis can be tailored for specific bioactivity.

Synthesis of core/shell cobalt-doped rutile TiO2 nanorods for MB degradation under visible light

Although TiO2 has been widely applied in many fields, the design and preparation of one-dimensional rutile TiO2 nanomaterials for high-efficiency photocatalysis under visible light remain challenging. Herein, uniform Co-doped rutile TiO2 nanorods with selective adsorption and photocatalytic activity for methylene blue (MB) have been developed via a one-pot molten salt flux method. Compared to pure rutile TiO2 nanorods, the Co-doped rutile TiO2 nanorods exhibited an obvious core/shell structure with smaller inner crystal face spacing (d 001 = 0.20 nm) and a larger rough surface (the BET specific surface area is 25 m2 g-1). Furthermore, different dyes were employed to investigate the adsorption ability of Co-doped rutile TiO2 nanorods. The density functional theory (DFT) calculations determined that both the electrostatic potential and molecular structure could influence the adsorption behavior on the photocatalyst surface. The results indicated that the Co-doped TiO2 nanorods possessed a high selective adsorption capacity for MB (134.54 mg g-1 in neutral solution). The degradation of MB using Co-doped rutile TiO2 nanorods was conducted under visible light irradiation, yielding with an apparent rate constant of 0.301 min-1 at pH = 7. The degradation mechanism was further explored through electron spin resonance (ESR) experiments, which identified the formation of superoxide anions (·O2 -) and hydroxyl radicals (·OH) in the system. This study provides a new strategy for preparing novel rutile TiO2 photocatalysts for the degradation of organic dyes under visible light.

Antibacterial potential of silver and zinc loaded plasma-electrolytic oxidation coatings for dental titanium implants

Peri-implantitis is known as an inflammatory condition affecting the soft and hard tissue around dental implants. A promising strategy to prevent these conditions is the use of antibacterial implants. This study aimed to evaluate the antibacterial potential of titanium (Ti) dental implants modified using plasma-electrolytic oxidation (PEO). The modified surfaces were subsequently loaded with silver (Ag) (n = 6) and zinc (Zn) (n = 6) ions and compared to unloaded Ti specimens (n = 6), with untreated specimens serving as controls. The specimens (each n = 5) were incubated in a culture medium containing a mixture of specific anaerobic bacterial strains. Scanning electron microscopy (SEM) was used to visualize the bacterial biofilm on each specimen. In addition, total bacterial deoxxyribonucleic acid (DNA) and the number of viable bacteria were determined using quantitative real-time polymerase chain reaction (qrt-PCR) and colony forming unit analysis (CFU), respectively. The results of the CFU analysis showed a 2 log (99%) reduction in viable bacteria in the samples loaded with Ag and Zn compared to the unloaded control group (p < 0.05). Moreover, significantly lower bacterial DNA counts were detected with a 5 log reduction (99.999%) in the Ag and Zn samples compared to the positive control group (bacterial mixed culture solution, p < 0.05). Therefore, it was considered that Ag and Zn loaded Ti implants may be a promising addition to current approaches to enable advanced antibacterial dental implants. However, further studies should be conducted to evaluate the in vivo cytocompatibility of the developed specimens.

A review on green synthesis of silver nanoparticles (SNPs) using plant extracts: a multifaceted approach in photocatalysis, environmental remediation, and biomedicine

A sustainable and viable alternative for conventional chemical and physical approaches is the green production of silver nanoparticles (SNPs) using plant extracts. This review centers on the diverse applications of plant-mediated SNPs in biomedicine, environmental remediation, and photocatalysis. Ocimum sanctum (tulsi), Curcuma longa (turmeric), and Azadirachta indica (neem) and many others are plant extracts that have been used as stabilizing and reducing agents because of their extensive phytochemical profiles. The resulting SNPs have outstanding qualities, such as better photocatalytic degradation of organic dyes like methylene blue, antibacterial efficacy towards multidrug-resistant pathogens, biocompatibility for possible therapeutic applications, and regulated magnitude (10-50 nm), enhanced rigidity, and tunable surface plasmon resonance. Significant effects of plant extract type, amount, and synthesis parameters on the physical and functional characteristics of SNPs are revealed by key findings. Along with highlighting important issues and potential paths forward, this review also underlines the necessity of scalable production, thorough toxicity evaluations, and investigating the incorporation of SNPs into commercial applications. This work highlights how plant-based SNPs can be used to address global environmental and biological concerns by straddling the division between sustainable chemistry and nanotechnology.

Synthesis, characterization and application of BR@Ag nanocomposite material for high degree reduction of p-nitro phenol under a suitable condition

One of the most essential chemical processes that is utilized in the manufacturing of a great deal of contemporary goods is called heterogeneously catalyzed reactions, and it is also one of the most fascinating. Metallic nanostructures are heterogeneous catalysts for range reactions due to their huge surface area, large assembly of active surface sites, and quantum confinement effects. Unprotected metal nanoparticles suffer from irreversible agglomeration, catalyst poisoning, and limited life cycle. To circumvent these technical disadvantages, catalysts are frequently spread on chemically inert materials like as mesoporous Al2O3, ZrO2, and different types of ceramic material. In this research, plentiful bauxite residue is used to create a low-cost alternative catalytic material. We have hydrogenated p-Nitrophenol to p-Aminophenol on bauxite residue (BR) supported silver nanocomposites (Ag NCs). The phase and crystal structure, bond structure and morphological analysis of the developed material will be done XRD, FTIR, and SEM-EDX respectively. The ideal conditions were 150 ppm of catalyst, 0.1 mM of p-NP, and 10 minutes overall up-to 99% conversion of p-NP to p-AP. A multi-variable predictive model created using Response Surface Methodology (RSM) and a data-based Artificial Neural Network (ANN) model were found to be the best ways to predict the maximum conversion efficiency. ANN models predicted efficiency more accurately than RSM models, and the strong agreement between model predictions and experimental data was indicated by their low relative error (RE0.10), high regression coefficient (R2>0.97), and Willmott-d index (dwill-index > 0.95) values.

Extracellular Biosynthesis, Characterization and Antimicrobial Activity of Silver Nanoparticles Synthesized by Filamentous Fungi

The green synthesis of metal nanoparticles has received substantial attention due to their applications in various domains. The aim of the study was to obtain silver nanoparticles (AgNPs) by green synthesis with filamentous fungi, such as Cladosporium cladosporoides, Penicillium chrysogenum, and Purpureocillium lilacinum. Fungal species were grown on nutrient media and aqueous mycelium extracts were used to reduce Ag+ to Ag (0). The silver nanoparticles were analyzed by various techniques, such as UV-Visible spectroscopy (UV-Vis), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS), and Zeta potential. The formation of silver nanoparticles was confirmed by UV-Vis spectroscopy and the color change of the mixture containing metal precursor and aqueous mycelium extract. FTIR displayed different functional groups as capping and reducing agents for the biosynthesis of AgNPs. SEM and TEM provided information on the particles' morphology. DLS diagrams indicated mean particle diameters in the 124-168 nm region. All biosynthesized AgNPs had negative zeta values, which is a sign of good stability. Silver nanoparticles were evaluated for antimicrobial activity, and the most active were those synthesized with metabolites from Cladosporium, leading to 93.75% inhibition of Staphylococcus aureus, 67.20% of Escherichia coli, and 69.56% of Candida albicans. With the highest microbial inhibition percentage and a very good Poly Dispersion Index (Pd I), Cladosporium cladosporoides was selected as an environmentally friendly source of silver nanoparticles that could be used as a potential antimicrobial agent.

Nanoarchitectonics with cetrimonium bromide on metal nanoparticles for linker-free detection of toxic metal ions and catalytic degradation of 4-nitrophenol

Heavy metal ions and organic pollutants, such as 4-nitrophenol (4-NP), pose significant environmental and human health threats. Addressing these challenges necessitates using advanced nanoparticle-based systems capable of efficient detection and degradation. However, conventional approaches utilizing strong capping agents like cetrimonium bromide (CTAB) on nanoparticles lead to limitations due to the rigid nature of CTAB. This restricts its utility in heavy metal detection and 4-NP degradation, requiring additional surface modifications using linker molecules, thereby increasing process complexity and cost. To overcome these limitations, there is a critical need for the development of an easy-to-use, dual-functional, linker-free nanosystem capable of simultaneous detection of heavy metals and efficient degradation of 4-NP. For enabling linker-free/ligand-free detection of heavy metal ions and catalytic degradation of 4-NP, CTAB was engineered as a versatile capping agent on gold and silver nanoparticles. Various factors, including nanoparticle characteristics such as shape, size, metal composition, centrifugation, and NaOH amount, were investigated for their impact on the performance of CTAB-capped nanoparticles in heavy metal detection and 4-NP degradation. CTAB-Au nanospheres demonstrated limited heavy metal ion detection capability but exhibited remarkable efficiency in degrading 94.37% of 4-NP within 1 min. In contrast, silver nanospheres effectively detected Hg2+, Cu2+, and Fe3+ at concentrations as low as 1 ppm and degraded 90.78% of 4-NP within 30 min. Moreover, anisotropic gold nanorods (CTAB-AuNR1 and CTAB-AuNR2) showed promising sensing capabilities towards Cu2+, Cr3+, and Hg2+ at 0.5 OD, while efficiently degrading 4-NP within 5 min at 1 OD. This study emphasizes the importance of tailoring parameters of CTAB-capped nanoparticles for specific sensing and catalytic applications, offering potential solutions for environmental remediation and human health protection.

Biosynthesis of metal/metal oxide nanoparticles via Deverra tortuosa: characterization, GC/MS profiles, and biological potential

Since the beginning of humanity, people have used wild medicinal plants for the treatment of various diseases. Nowadays, researchers and scientists pay attention to exploring new tools to maximize the efficacy of natural products from natural resources, and among these tools formulation of nanoparticles is very promising. The green synthesis of metal/metal oxide nano-solutions using the Deverra tortuosa extract has still not been explored well. This study aims to prepare many metal/metal oxide nanoparticle solutions such as ZnO-NPs, SeO2-MNPs, and Ag-NPs via the methanol extract of D. tortuosa as safe, easy, green, and economic approach as well as characterize the chemical components of D. tortuosa plant by GC-MS spectroscopy analysis. The synthesized M-NPs solutions were characterized by UV-visible (UV-Vis) spectroscopy, Transmission Electron Microscope (TEM), zeta potential, Fourier Transform Infrared (FT-IR) spectroscopy, and phytochemical analyses. The potential antioxidant capacity was estimated for the methanol extract of this plant along with the metal/metal oxide nanoparticles solutions by DPPH assay. In addition, the cytotoxic activity was in vitro assessed for the inspected samples against various tumor and normal cell lines applying MTT assay. The application of the D. tortuosa methanolic extract resulted in NPs with a range of 11.79-85.9 nm which was characterized by UV-Vis spectroscopy, TEM, zeta potential, and FT-IR spectroscopy that revealed various functional groups of the tested samples. The GC-MS analysis of the D. tortuosa methanolic extract showed the presence of 31 chemical compounds with 2-methyl-3-oxocyclopent-1-ene-1-carboxylic acid, methyl oleate, and 6-allyl-4,5-dimethoxybenzo[d][1,3]-dioxole as major constituents. The extract showed considerable antioxidant activity as well as antimicrobial activity that was assessed also against varied bacterial and fungal species. Remarkable potencies for the investigated metal/metal oxide nanoparticle solutions hinder the growth of the tumor cell lines, in addition to the growth of the microbial species. Based on the determined biological activities of the produced NPs, future study is recommended to characterize the pure authentic compounds that are identified within the D. tortuosa as major compounds as well as evaluate their modes of action.

Nano silver oxide-modified activated carbon as a novel catalyst for efficient removal of bacteria and micropollutants in aquatic environment

Heterogeneous Fenton process is a promising water treatment technology for sterilization and degradation of organic pollutants, due to the strong oxidation of hydroxyl radicals (OH˙) generated. However, the low H2O2 activation efficiency and the instability of catalyst leading to low OH˙ production restricted development of this technology. Herein, we synthesized a novel porous activated carbon-loaded nano silver oxide (nAg2O/AC) catalyst to enhance the activation of H2O2 for removing bacteria (E. coli) and micropollutants (Tetracycline, TC) from water. In the nAg2O/AC Fenton system, reductive hydroxyl groups on AC accelerated Ag(i)/Ag cycle through mediated electron transfer, which markedly increased H2O2 activation efficiency to 73.7% (About 2.9 times that of traditional Fenton). Hence, nAg2O/AC Fenton achieved up to 6.0 log and 100% removal efficiency for E. coli and TC, respectively. The OH˙ as the major oxidizing species in nAg2O/AC Fenton system was detected and verified by radical scavenging tests and electron spin resonance (ESR) measurement. After 4 and 5 cycles of experiments, the removal of E. coli and TC still reached 5.2 log and 96%, respectively, confirming good stability of nAg2O/AC for considerable application prospects. This study concluded that nAg2O/AC is a promising H2O2 catalyst for simultaneous removal of bacteria and micropollutants in aqueous environment.

The Multifaceted Perspective on the Role of Green Synthesis of Nanoparticles in Promoting a Sustainable Green Economy

The current economic development paradigm, which is based on steadily rising resource consumption and pollution emissions, is no longer viable in a world with limited resources and ecological capacity. The “green economy” idea has presented this context with a chance to alter how society handles the interplay between the environmental and economic spheres. The related concept of “green nanotechnology” aims to use nano-innovations within the fields of materials science and engineering to generate products and processes that are economically and ecologically sustainable, enabling society to establish and preserve a green economy. Many different economic sectors are anticipated to be impacted by these applications, including those related to corrosion inhibitor nanofertilizers, nanoremediation, biodegradation, heavy metal detection, biofuel, insecticides and pesticides, and catalytic CO2 reduction. These innovations might make it possible to use non-traditional water sources safely and to create construction materials that are enabled by nanotechnology, improving living and ecological conditions. Therefore, our aim is to highlight how nanotechnology is being used in the green economy and to present promises for nano-applications in this domain. In the end, it emphasizes how critical it is to attain a truly sustainable advancement in nanotechnology.

Catalytic and anti-cancer properties of platinum, gold, silver, and bimetallic Au-Ag nanoparticles synthesized by Bacillus sp. bacteria

Metallic nanoparticles play a significant role in the catalysis of chemical processes, besides, bimetallic nanoparticles with abundant active sites can reduce metallic nanoparticles toxicity in addition to increasing their catalytic performances. In this work, the platinum, gold, and silver nanoparticles are bio-synthesized using a native bacterium (GFCr-4). Also, the Au-Ag and Au@Ag bimetallic nanoparticles with alloy and core-shell structures, respectively, are biologically synthesized. To improve the synthesis, the effects of various factors like pH, temperature, electron donor, and ionic liquids were investigated. The as-synthesized nanoparticles were characterized with different techniques. The microscope images and dynamic light scattering (DLS) analysis confirm the uniform distribution of as-synthesized nanoparticles with average sizes of 25, 30, 47, 77, and 86 nm obtained for Ag, Au, Pt, Au-Ag alloy, and Au@Ag core-shell, respectively. The catalytic performances of as-synthesized nanoparticles were investigated. The Au-Ag alloy nanoparticles exhibit better catalytic performance than the as-synthesized metallic Au nanoparticles, according to the Gewald reaction. According to the photocatalytic study, the yield can be increased by up to 92% by using PtNPs in the presence of a green LED. Additionally, for the first time, PtNPs were utilized as an effective catalyst in a peroxyoxalate chemiluminescence (POCL) system in the presence of nuclear fast red (NFR) as a novel fluorophore. In addition, the results of the MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay revealed that the synthesized eco-friendly nanoparticles have a low effect on the lethality of 3T3 normal cells whereas MCF-7 cancer cells were inhibited up to 77.3% after treatment by PtNPs nanoparticles.

In Vitro Effects of Silver Nanoparticles on Pathogenic Bacteria and on Metabolic Activity and Viability of Human Mesenchymal Stem Cells

The rapid development of nanotechnology has led to the use of silver nanoparticles (Ag-NPs) in various biomedical fields. However, the effect of Ag-NPs on human mesenchymal stem cells (hMSCs) is not fully understood. Moreover, too frequent an exposure to products containing nanosilver in sublethal amounts raises widespread concerns that it will lead to the development of silver-resistant microorganisms. Therefore, this study aimed to evaluate the mechanism of action of Ag-NPs on hMSCs by analyzing the cellular uptake of Ag-NPs by the cells and its effect on their viability and to assess antimicrobial activity of Ag-NPs against emerging bacterial strains, including multidrug-resistant pathogens. For metabolic activity and viability evaluation, hMSCs were incubated with different concentrations of Ag-NPs (14 μg/mL, 7 μg/mL, and 3.5 μg/mL) for 10 min., 1 h and 24 h and subsequently analyzed for their viability by live-dead staining and metabolic activity by the MTS assay. The effect of Ag-NPs on bacterial pathogens was studied by determining their minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). In conclusion, it was observed that exposure of hMSCs to Ag-NPs of size <10 nm has no cytotoxic effect on the metabolic activity of the cells at the concentration of 3.5 μg/mL, with minimal cytotoxic effect being observed at the concentration of 14 μg/mL after 24 h of incubation. Our findings also confirmed that Ag-NPs at the concentration of 4 μg/mL are effective broad-spectrum bactericidal agents, regardless of the antibiotic-resistance mechanism present in bacteria.

Silver nanoparticle as an alternate to antibiotics in cattle semen during cryopreservation

The proposed study was to determine if the silver nanoparticles can be used as potential antimicrobial agents and can replace the use of conventional antibiotics in semen without affecting the motility and fertility of semen. The silver nanoparticles prepared by chemical reduction method were confirmed by determination of the wavelength of surface plasmon resonance peak and further characterized using Zetasizer by determining their size, polydispersity index, and zeta potential. The nanoparticles were assessed for antibacterial activity and their concentration was optimized for use in semen extender for cryopreservation. Cryopreserved semen was further evaluated for seminal parameters, antioxidant parameter, and microbial load. Prepared silver NPs showed a plasmon resonance peak at 417 nm wavelength. NPs were found to possess antibacterial activity and were supplemented in semen extender @ 125 and 250 µg/ml for semen cryopreservation. There was a significant increase in pre and post-freezing motility and other seminal parameters. The microbial load of frozen-thawed semen of control and supplemented groups were well within the permissible limits. Lipid peroxidation levels were reduced in NPs supplemented groups, and reactive oxygen species (ROS) levels were significantly reduced in semen supplemented with 125 µg/ml NPs. Thus it can be conclude that silver NPs can be successfully used as a substitute for antibiotics in cattle bull semen cryopreservation with good antimicrobial activity and no adverse effects on sperm characteristics.

Microalga Broths Synthesize Antibacterial and Non-Cytotoxic Silver Nanoparticles Showing Synergy with Antibiotics and Bacterial ROS Induction and Can Be Reused for Successive AgNP Batches

The era of increasing bacterial antibiotic resistance requires new approaches to fight infections. With this purpose, silver-based nanomaterials are a reality in some fields and promise new developments. We report the green synthesis of silver nanoparticles (AgNPs) using culture broths from a microalga. Broths from two media, with different compositions and pHs and sampled at two growth phases, produced eight AgNP types. Nanoparticles harvested after several synthesis periods showed differences in antibacterial activity and stability. Moreover, an evaluation of the broths for several consecutive syntheses did not find relevant kinetics or activity differences until the third round. Physicochemical characteristics of the AgNPs (core and hydrodynamic sizes, Z-potential, crystallinity, and corona composition) were determined, observing differences depending on the broths used. AgNPs showed good antibacterial activity at concentrations producing no or low cytotoxicity on cultured eukaryotic cells. All the AgNPs had high levels of synergy against Escherichia coli and Staphylococcus aureus with the classic antibiotics streptomycin and kanamycin, but with ampicillin only against S. aureus and tetracycline against E. coli. Differences in the synergy levels were also dependent on the types of AgNPs. We also found that, for some AgNPs, the killing of bacteria started before the massive accumulation of ROS.

Comparative Characterization of Iron and Silver Nanoparticles: Extract-Stabilized and Classical Synthesis Methods

Synthesis of silver nanoparticles using extracts from plants is an advantageous technological alternative to the traditional colloidal synthesis due to its simplicity, low cost, and the inclusion of environmentally friendly processes to obtain a new generation of antimicrobial compounds. The work describes the production of silver and iron nanoparticles using sphagnum extract as well as traditional synthesis. Dynamic light scattering (DLS) and laser doppler velocimetry methods, UV-visible spectroscopy, transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDS), atomic force microscopy (AFM), dark-field hyperspectral microscopy, and Fourier-transform infrared spectroscopy (FT-IR) were used to study the structure and properties of synthesized nanoparticles. Our studies demonstrated a high antibacterial activity of the obtained nanoparticles, including the formation of biofilms. Nanoparticles synthesized using sphagnum moss extracts likely have high potential for further research.

Sericin mediated gold/silver bimetallic nanoparticles and exploration of its multi-therapeutic efficiency and photocatalytic degradation potential

The current investigation aimed at bimetallic gold-silver nanoparticles (Au/Ag NPs), here called BM-GS NPs, synthesis using sericin protein as the reducing agent in an easy, cost-effective, and sustainable way. The obtained BM-GS NPs were characterized by UV-Visible spectroscopy, Transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDS), atomic force microscopy (AFM), Dynamic light scattering (DLS) and Zeta potential, X-ray Powder Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and Thermogravimetric analysis followed by evaluation of its multitherapeutic and photocatalytic degradation potentials. The TEM analysis revealed its spherical nature and the EDS result displayed the presence of both Ag and Au elements, confirming the synthesis of BM-GS NPs. The XRD pattern verified the crystalline nature of the nanoparticles (NPs). The DLS analysis showed an average size of 86.08 d nm and the zeta potential showed a highly negative value (-26.3 mV) which specifies that the generated bimetallic NPs are stable. The BM-GS NPs exhibited positive wound healing potential (with 63.38% of wound closure rate at 25 μg/ml, as compared to 54.42% by the untreated control) with very negligible toxicity effect on the cell viability of the normal keratinocyte cells. It also demonstrated promising antioxidant properties with 65.00%, 69.23%, and 63.03% activity at 100 μg/ml concentration for ABTS (2, 2-azinobis) (3-ethylbenzothiazoline-6-sulfonic acid)), DPPH (1, 1 diphenyl-2-picrylhydrazyl) and SOD (superoxide dismutase enzyme) assays respectively, antidiabetic potential (with a significantly high α-glucosidase inhibition potential of 99.69% at 10μg/ml concentration and 62.11% of α-amylase enzyme inhibition at 100 μg/ml concentration) and moderate tyrosinase inhibitory potential (with 17.09% at 100 μg/ml concentration). Besides, it displayed reasonable antibacterial potential with the diameter of zone of inhibition ranging between 10.89 and 12.39 mm. Further, its antibacterial mode of action reveals that its effects could be due to being very smaller, the NPs could have penetrated inside the cellular membrane thereby causing rupture and damage to the interior materials leading to cellular lysis. The photocatalytic evaluation showed that synthesized BM-GS NPs have the efficiency of degrading methylene blue dye by 34.70% within 3 h of treatment. The above findings revealed the multi-therapeutic efficacy of the sericin globular protein-mediated BM-GS NPs and its potential future applications in the cosmetics and food sector and environmental contamination management industries.

Recent advances in advanced oxidation processes (AOPs) for the treatment of nitro- and alkyl-phenolic compounds

The presence of phenolic compounds in the aquatic environment has posed severe risks due to their toxicity. Among the phenolic families, nitro- and alkyl-phenolic compounds have been categorized as precedence contaminants by the United States Environmental Protection Agency (US EPA). Therefore, efficient treatment methods for wastewater containing nitro- and alkyl-phenolic compounds are urgently needed. Due to the advantages of creating reactive species and generating efficient degradation of hazardous contaminants in wastewater, advanced oxidation processes (AOPs) are well-known in the field of treating toxic contaminants. In this review paper, the recent directions in AOPs, catalysts, mechanisms, and kinetics of AOPs are comprehensively reviewed. Furthermore, the conclusion summarizes the research findings, future prospects, and opportunities for this study. The main direction of AOPs lies on the optimization of catalyst and operating parameters, with industrial applications remain as the main challenge. This review article is expected to present a summary and in-depth understanding of AOPs development; and thus, inspiring scientists to accelerate the evolution of AOPs in industrial applications.

Sustainable magnetically recoverable Iridium-coated Fe3O4 nanoparticles for enhanced catalytic reduction of organic pollutants in water

The reduction of nitroarenes to aromatic amines is one of the potential pathways to remediate the hazardous impact of toxic nitroarenes on the aquatic environment. Aromatic amines obtained from the reduction of nitroaromatics are not only less toxic than nitroaromatics but also act as important intermediates in the synthesis of dyes, drugs, pigments, herbicides, and polymers. There is a huge demand for the development of cost-effective, and eco-friendly catalysts for the efficient reduction of nitroarenes. In the present study, Fe₃O₄@trp@Ir nanoparticles were explored as efficient catalysts for the reduction of nitroarenes. Fe₃O₄@trp@Ir magnetic nanoparticles were fabricated by surface coating of Fe₃O₄ with tryptophan and iridium by co-precipitation method. As-prepared Fe₃O₄@trp@Ir nanoparticles are environmentally benign efficient catalysts for reducing organic pollutants such as 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), and 1-bromo-4-nitrobenzene (1-B-4-NB). The key parameters that affect the catalytic activity like temperature, catalyst loading, and the concentration of reducing agent NaBH₄ were optimized. The obtained results proved that Fe₃O₄@trp@Ir is an efficient catalyst for reducing nitroaromatics at ambient temperature with a minimal catalyst loading of 0.0025%. The complete conversion of 4-nitrophenol to 4-aminophenol took only 20 s with a minimal catalyst loading of 0.0025% and a rate constant of 0.0522 s^-1. The high catalytic activity factor (1.040 s^-1 mg^-1) and high turnover frequency (9 min^-1) obtained for Fe₃O₄@trp@Ir nanocatalyst highlight the possible synergistic effect of the two metals (Fe and Ir). The visible-light photocatalytic degradation of 4-NP was also investigated in the presence of Fe₃O₄@trp@Ir. The photocatalytic degradation of 4-NP by Fe₃O₄@trp@Ir is completed in 20 min with 95.15% efficiency, and the rate of photodegradation of 4-NP (0.1507 min^-1) is about twice the degradation rate of 4-NP in the dark (0.0755 min^-1). The catalyst was recycled and reused for five cycles without significant reduction in the conversion efficiency of the catalyst.

Boric acid-functionalized silver nanoparticles as SERS substrate for sensitive and rapid detection of fructose in artificial urine

The accurate detection of fructose in human urine can help prevent and screen for diseases such as fructokinase deficiency and hereditary fructose intolerance. Surface-enhanced Raman spectroscopy (SERS) is an analytical technique with selectivity and high sensitivity, which has been widely applied to the detection of targets with complex backgrounds. In this work, 4-mercaptophenylboronic acid (4-MPBA) was modified on the surface of silver nanoparticles (AgNPs) under mild conditions to obtain a boronic acid-functionalized SERS substrate for the detection of fructose in artificial urine. The detection mechanism was based on the deboronization reaction of 4-MPBA on the surface of AgNPs, which was induced by fructose, and the Raman signal of the generated thiophenol (TP) molecules was significantly enhanced by the silver nanoparticles, with a linear increase in SERS peak intensity at 1570 cm^-1. We achieved the detection limits of 0.084 µmol/L in water and 0.535 µmol/L in urine by this method. The relative standard deviation (RSD) in the recovery experiments of urine ranged from 1.01 % to 2.22 %, and the whole detection time was less than 10 min, which indicated that this method is highly reliable for fructose detection and has a good prospect in bioassay and clinical medicine.

Anti-bacterial Effect and Characteristics of Gold Nanoparticles (AuNps) Formed with Vitex negundo Plant Extract

Our current study reports the anti-bacterial activity of the gold nanoparticles (AuNps) synthesized by the green synthesis method using Vitex negundo plant leaves. The aqueous extract of Vitex negundo plant leaves are acting as the capping and stabilizing agent in the synthesis of AuNps. It is already evident from earlier studies that Vitex negundo is an abundant source of polyphenols, flavonoids, terpenoids, and many other biologically active compounds. The present study reveals the potential of biologically active compounds from the plant in the reduction reaction of chloroauric acid (HAuCl₄) into gold nanoparticles. The green synthesis method is adapted instead of the chemical method, which is toxic and more expensive. The gold nanoparticles subjected to characterization with the help of UV-visible spectroscopy, FTIR to determine functional groups, light scattering to estimate size and uniformity, scanning emission microscopy with EDX for accurate size and shape of AuNps, and X-ray diffraction to reveal the crystalline structure. The characteristics of AuNps formed are UV reading at 520 nm, FTIR showing the presence of phenols and alkenes, DLS, SEM, and XRD confirming the spherical shape with the size around 70-90 nm. The anti-bacterial activity of the gold nanoparticles is evaluated against four different species of bacteria, each two gram-positive and gram-negative. The gold nanoparticles formed by Vitex negundo show good anti-bacterial activity against Salmonella typhi and M. luteus bacteria with a zone of inhibition of 6 mm and 2 mm respectively. Furthermore, the cytotoxic activities of the gold nanoparticles are yet to be known to their full extent.

Comparative study of zinc oxide nanoparticles synthesized through biogenic and chemical route with reference to antibacterial, antibiofilm and anticancer activities

The present focused on comparative study on synthesis of ZnO nanoparticles (ZnO NPs) using chemical method via alkaline precipitation method (ZnO(A) NPs) using NaOH and biogenic method using termite mound extract (ZnO(B) NPs). GC-MS analysis revealed that D-limonene present in termite mound extract might be responsible for the synthesis of ZnO(B) NPs. XRD patterns confirmed hexagonal crystalline structure of ZnO(A) and (B) NPs. Results of antibacterial activity illustrated that ZnO(B) NPs showed its potential against Pseudomonas aeruginosa, ESBL-1, ESBL-2 and EBSL-3. Antibiofilm studies revealed that ZnO(B) NPs exhibited optimum decline in MRSA biofilm formation than ZnO(A) NPs. In addition, ZnO(B) NPs showed potent cytotoxic effect against lung cancer cell lines A549 with IC50 of 35.16 ± 0.10 μg/mL in comparison with ZnO(A) NPs (IC50- 55.09 ± 0.30 μg/mL). Overall, the results revealed that biogenic synthesis of ZnO NPs ensures its biosafety level and enhanced biological activity when compared to chemical synthesis method.

Biosynthesis of Metal and Metal Oxide Nanoparticles Using Microbial Cultures: Mechanisms, Antimicrobial Activity and Applications to Cultural Heritage

Nanoparticles (1 to 100 nm) have unique physical and chemical properties, which makes them suitable for application in a vast range of scientific and technological fields. In particular, metal nanoparticle (MNPs) research has been showing promising antimicrobial activities, paving the way for new applications. However, despite some research into their antimicrobial potential, the antimicrobial mechanisms are still not well determined. Nanoparticles' biosynthesis, using plant extracts or microorganisms, has shown promising results as green alternatives to chemical synthesis; however, the knowledge regarding the mechanisms behind it is neither abundant nor consensual. In this review, findings from studies on the antimicrobial and biosynthesis mechanisms of MNPs were compiled and evidence-based mechanisms proposed. The first revealed the importance of enzymatic disturbance by internalized metal ions, while the second illustrated the role of reducing and negatively charged molecules. Additionally, the main results from recent studies (2018-2022) on the biosynthesis of MNPs using microorganisms were summarized and analyzed, evidencing a prevalence of research on silver nanoparticles synthesized using bacteria aiming toward testing their antimicrobial potential. Finally, a synopsis of studies on MNPs applied to cultural heritage materials showed potential for their future use in preservation.

Bioremediation of Hazardous Wastes Using Green Synthesis of Nanoparticles

Advanced agronomic methods, urbanisation, and industrial expansion contaminate air, water and soil, globally. Agricultural and industrial activities threaten living biota, causing biodiversity loss and serious diseases. Strategies such as bioremediation and physiochemical remediation have not been effectively beneficial at treating pollutants. Metal-based nanoparticles (NPs) such as copper, zinc, silver, gold, etc., in various nanoformulations and nanocomposites are used more and more as they effectively resist the uptake of toxic compounds via plants by facilitating their immobilisation. According to studies, bio-based NP synthesis is a recent and agroecologically friendly approach for remediating environmental waste, which is effective against carcinogens, heavy metal contamination, treating marine water polluted with excessive concentrations of phosphorus, nitrogen and harmful algae, and hazardous dye- and pesticide-contaminated water. Biogenic resources such as bacteria, fungi, algae and plants are extensively used for the biosynthesis of NPs, particularly metallic NPs. Strategies involving green synthesis of NPs are nontoxic and could be employed for commercial scale production. Here, the focus is on the green synthesis of NPs for reduction of hazardous wastes to help with the clean-up process.

A Novel Biocidal Nanocomposite: Spherical Silica with Silver Ions Anchored at the Surface

This article is devoted to a novel class of antimicrobial agents: nanocomposites composed of spherical silica and silver ions located at the silica's surface with the assumed distribution. Such materials are in high demand due to the increasing threat from bacterial strains that are becoming resistant to currently known antibiotics. In particular, we focus on materials that make it possible to limit the growth of bacterial colonies on a variety of tactile surfaces. In this paper, we present a method for preparing a silica-based nanocomposite containing silver ions and the analysis of their antimicrobial properties. Our research revealed that the presence of tested nanocomposite induces very high oxidative stress in the bacteria cell, damaging and modifying bacterial DNA, creating oxidized guanines, cytosines, or adenines, which causes its very rapid destruction, leading to cell death.

Recent Advances of Silver-Based Coordination Polymers on Antibacterial Applications

With the continuous evolution of bacteria and the constant use of traditional antibiotics, the emergence of drug-resistant bacteria and super viruses has attracted worldwide attention. Antimicrobial therapy has become the most popular and important research field at present. Coordination Polymer (CP) and/or metal-organic framework (MOF) platforms have the advantages of a high biocompatibility, biodegradability, and non-toxicity, have a great antibacterial potential and have been widely used in antibacterial treatment. This paper reviewed the mechanism and antibacterial effect of three typical MOFs (pure Ag-MOFs, hybrid Ag-MOFs, and Ag-containing-polymer @MOFs) in silver-based coordination polymers. At the same time, the existing shortcomings and future views are briefly discussed. The study on the antibacterial efficacy and mechanism of Ag-MOFs can provide a better basis for its clinical application and, meanwhile, open up a novel strategy for the preparation of more advanced Ag-contained materials with antibacterial characteristics.

Bacterial-driven upcycling spent Ag into high-performance catalyst for toxic organics reduction

Achieving up-cycling and reusing of silver from the waste X-rays films is currently a huge challenge. Here, we designed a facile method that upcycles Ag⁺ extract efficiently from waste film into highly dispersed value-added biological Ag/AgO-AgCl nanoparticles (bio-Ag/AgO-AgCl NPs) using Bacillus thuringiensis-secreted extracellular polymeric substance without additional reductants and electron donors. The recovery efficiency of silver exceeded 99.8%. Surprisingly, the bio-Ag/AgO-AgCl NPs can well solve the bottleneck problem of slow Ag catalytic kinetics. When the amount of catalyst was 1.9 mg, the reduction efficiency and reduction rate of 10 ppm methyl orange were 97.9% and 7 min, and that of 30 ppm Congo red were 95.3% and 5 min respectively, which is superior to other chemically synthesized silver-base catalysts. This bioremediation methodology provides an effective and practical technical approach for precious metal remediation and sustainable energy development.

Silver and copper-oxide nanoparticles prepared with GA3 induced defense in rice plants and caused mortalities to the brown planthopper, Nilaparvata lugens (Stål)

BACKGROUND

Nanoparticles have been employed as nanopesticides for pest control in agriculture. However, the harmful effects of their chemical synthesis on human and environmental health have resulted in increased use of green synthetic approaches, including the use of plant extracts. The brown planthopper, Nilaparvata lugens (Stål) (BPH), is a severe pest of rice plants (Oryza sativa L.), especially in Asia. It is usually controlled chemically but has developed resistance against many insecticides.

RESULTS

In this study, we synthesized metallic silver (Ag-NPs) and copper-oxide (CuO-NPs) nanoparticles using the exogenous phytohormone, gibberellic acid (GA₃), as a reducing agent. We then sprayed them separately on rice plants and BPH together and evaluated their effects on the plants and insects. SEM and TEM images showed that the synthesis was successful, indicated by the sizes (25-60 nm), uniform shape and spherical and cubical structures of Ag-NPs, as well as by the rugby sheet-like of CuO-NPs with lateral sizes of 150-340 nm and thickness of 30-70 nm. Independent applications of the nanoparticles and GA₃ on rice plants induced different volatile profiles, of which the highest number emitted was under Ag-NPs, including the highest emission of linalool. Transcriptome analysis showed that Ag-NPs-treated rice plants showed different transcriptome profiles compared to the control, 24 h after treatment, including the upregulation of the linalool synthase gene, genes of plants transcription factors such as WRKY, bHLH and NAC and other genes involved in plant defense responses. In all treatments, the mortality rate of BPH increased with an increase in NPs concentrations over time but was prominent under Ag-NPs treatment. The LC₅₀ values for Ag-NPs and CuO-NPs decreased with an increase in time. Also, the nanoparticles increased the activities of protective enzymes (POD, SOD and CAT), inhibited that of detoxification enzymes (A-CHE, ACP and AKP), and reduced total protein concentrations in the BPH.

CONCLUSIONS

These results show that synthesizing nanoparticles using phytohormones may be a safer and environmentally friendly option, which also holds promise for controlling the BPH in rice production.

Synthesis and Characterization of Silver Nanoparticles from Rhizophora apiculata and Studies on Their Wound Healing, Antioxidant, Anti-Inflammatory, and Cytotoxic Activity

Silver nanoparticles (AgNPs) have recently gained interest in the medical field because of their biological features. The present study aimed at screening Rhizophora apiculata secondary metabolites, quantifying their flavonoids and total phenolics content, green synthesis and characterization of R. apiculata silver nanoparticles. In addition, an assessment of in vitro cytotoxic, antioxidant, anti-inflammatory and wound healing activity of R. apiculata and its synthesized AgNPs was carried out. The powdered plant material (leaves) was subjected to Soxhlet extraction to obtain R. apiculata aqueous extract. The R. apiculata extract was used as a reducing agent in synthesizing AgNPs from silver nitrate. The synthesized AgNPs were characterized by UV-Vis, SEM-EDX, XRD, FTIR, particle size analyzer and zeta potential. Further aqueous leaf extract of R. apiculata and AgNPs was subjected for in vitro antioxidant, anti-inflammatory, wound healing and cytotoxic activity against A375 (Skin cancer), A549 (Lung cancer), and KB-3-1 (Oral cancer) cell lines. All experiments were repeated three times (n = 3), and the results were given as the mean ± SEM. The flavonoids and total phenolics content in R. apiculata extract were 44.18 ± 0.086 mg/g of quercetin and 53.24 ± 0.028 mg/g of gallic acid, respectively. SEM analysis revealed R. apiculata AgNPs with diameters ranging from 35 to 100 nm. XRD confirmed that the synthesized silver nanoparticles were crystalline in nature. The cytotoxicity cell viability assay revealed that the AgNPs were less toxic (IC₅₀ 105.5 µg/mL) compared to the R. apiculata extract (IC₅₀ 47.47 µg/mL) against the non-cancerous fibroblast L929 cell line. Antioxidant, anti-inflammatory, and cytotoxicity tests revealed that AgNPs had significantly more activity than the plant extract. The AgNPs inhibited protein denaturation by a mean percentage of 71.65%, which was equivalent to the standard anti-inflammatory medication diclofenac (94.24%). The AgNPs showed considerable cytotoxic effect, and the percentage of cell viability against skin cancer, lung cancer, and oral cancer cell lines was 31.84%, 56.09% and 22.59%, respectively. R. apiculata AgNPs demonstrated stronger cell migration and percentage of wound closure (82.79%) compared to the plant extract (75.23%). The overall results revealed that R. apiculata AgNPs exhibited potential antioxidant, anti-inflammatory, wound healing, and cytotoxic properties. In future, R. apiculata should be further explored to unmask its therapeutic potential and the mechanistic pathways of AgNPs should be studied in detail in in vivo animal models.

Nanoparticles Design for Theranostic Approach in Cancer Disease

Presently, there are no conclusive treatments for many types of cancer, mainly due to the advanced phase of the disease at the time of diagnosis and to the side effects of existing therapies. Present diagnostic and therapeutic procedures need to be improved to supply early detection abilities and perform a more specific therapy with reduced systemic toxicity. In this review, improvements in nanotechnology allowing the design of multifunctional nanoparticles for cancer detection, therapy, and monitoring are reported. Nanoparticles, thanks to the nanomaterials they are made of, can be used as contrast agents for various diagnostic techniques such as MRI, optical imaging, and photoacoustic imaging. Furthermore, when used as drug carriers, they can accumulate in tumor tissues through the passive or/and active targeting, protect encapsulated drugs from degradation, raise tumor exposure to chemotherapeutic agents improving treatment effects. In addition, nanocarriers can simultaneously deliver more than one therapeutic agent enhancing the effectiveness of therapy and can co-deliver imaging and therapy agents to provide integration of diagnostics, therapy, and follow-up. Furthermore, the use of nanocarriers allows to use different therapeutic approaches, such as chemotherapy and hyperthermia to exploit synergistic effects. Theranostic approach to diagnose and treat cancer show a great potential to improve human health, however, despite technological advances in this field, the transfer into clinical practice is still a long way off.

Photocatalytic degradation of tetracycline using hybrid Ag/Ag2S@BiOI nanowires: Degradation mechanism and toxicity evaluation

The wide use of antibiotics has caused their continual release and persistence in the eco-system, subsequently giving birth to antibiotic resistant bacterial species in the aquatic environment, thereby necessitating immediate and efficient remediation of the contaminated environment. In the present study, we synthesized Ag/Ag₂S@BiOI nanowires with an average diameter of ∼150 nm and length of 3-5 μm using a hydrothermal method and employed them as photocatalysts for photocatalytic degradation of tetracycline as a model antibiotic. The nanowire achieved nearly complete degradation of tetracycline (∼99%) within 60 min at the optimal condition of 100 mg/L TC concentration and pH 2. The degradation followed pseudo-first order kinetics, with a rate constant of 0.06228 min^{- 1}. Our toxicity tests showed that the nanowire has negligible toxicity towards PBMC cells, suggesting it as a promising photocatalyst.

Improved catalytic activity and bactericidal behavior of novel chitosan/V2O5 co-doped in tin-oxide quantum dots

The novel V2O5/chitosan (CS) co-doped tin oxide (SnO2) quantum dots (QDs) were synthesized via co-precipitation technique. The optical, structural, morphological, and catalytic properties of the concerned specimens were examined by UV-Vis, PL, FTIR, X-ray diffraction, HR-TEM, and EDS. Structural analysis through XRD confirmed the tetragonal structure of SnO2; meanwhile, HR-TEM measurements unveiled quantum dot morphology. Rotational and vibrational modes related to functional groups of (O-H, C-H, Sn-O, and Sn-O-Sn) have been assessed with FTIR spectra. Through UV-Vis spectroscopy, a reduction in band-gap (4.39 eV to 3.98 eV) and redshift in co-doped spectra of SnO2 were identified. Both CS/SnO2 and V2O5-doped CS@SnO2 showed promising catalytic activity in all media. Meanwhile, CS/SnO2 showed higher activity for use in hospital and industrial dye degradation in comparison to dopant-free Ch/SnO2. For V2O5/CS@ SnO2 QDs, inhibition domains of G -ve were significantly confirmed as 1.40-4.15 mm and 1.85-5.45 mm; meanwhile, for G +ve were noticed as 2.05-4.15 mm and 2.40-5.35 mm at least and maximum concentrations, correspondingly. These findings demonstrate the efficient role of V2O5/CS@SnO2 QDs towards industrial dye degradation and antimicrobial activity.

Enhancing antibacterial property of porous titanium surfaces with silver nanoparticles coatings via electron-beam evaporation

Antibacterial activity is one of the most vital characteristics for Titanium (Ti) dental implants. Coating antibacterial material onto Ti surfaces is an effective approach to enhance their intrinsic antibacterial ability. However, a cost-effective but efficient coating strategy for realizing this objective still remains challenging. In this study, we proposed a novel implant surface modification strategy for coating silver nanoparticles onto the porous Ti surface via a facile electron beam evaporation (EBE) approach. Porous Ti surfaces were firstly prepared by sand-blasting large grit acid-etching (SLA) process. Then, the silver nanoparticles coating thickness on the porous Ti surface was adjusted and optimized by altering the duration of EBE process. Consequently, composite porous Ti surfaces with different silver thicknesses were synthesized. Polished Ti (PT) surface without SLA or EBE process was also prepared as the controlled blank group. The surface characterizations were analyzed by SEM, AFM, and XPS. After that, the antibacterial properties of all groups were tested with bacteria counting method, bacterial viability test, live/dead bacterial staining, and SEM examination. Results show that silver nanoparticles were uniformly distributed on the porous Ti surfaces after the SLA and EBE processes. After being incorporated with silver nanoparticles, the composite surfaces successfully inhibited the growth of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The antibacterial ratio (AR) values of SLA-Ag groups increased with the increasing silver thickness and are significantly higher than those of PT and SLA groups. Therefore, by the SLA and EBE processes, the composite porous Ti surfaces modified with silver nanoparticles coatings demonstrate superior antibacterial property compared with pure Ti surfaces, which is highly promising for enhancing the antibacterial functions of dental implants. Graphical abstract.

A review on anticancer, antibacterial and photo catalytic activity of various nanoparticles synthesized by probiotics

Probiotics are beneficial bacteria that have a significant effect on host health and they are widely used in preventing and treating diseases. Nowadays probiotics are present in food, drug and several commercial complement products. In recent years the use of probiotics in the nanotechnology area, especially in nanoparticle synthesis, has significantly been increased. In this review, after some introduction about probiotic and their advantages, all the nanoparticles produced by probiotics are reviewed and discussed. Furthermore, biosynthetic mechanisms of nanoparticles and its applications in cancer therapy, antibacterial and photo catalytic activities, are also discussed.

Synthesis of Xylan-Click-Quaternized Chitosan via Click Chemistry and Its Application in the Preparation of Nanometal Materials

For the high-valued utilization of hemicelluloses and for realizing the controllable synthesis of NPs, this paper's aim is to combine xylan, chitosan and nanometal materials at the same time. In this research study, firstly, propargyl xylan was synthesized via nucleophilic substitution reaction between xylan and propargyl bromide in NaOH solution. On the other hand, a tosyl group was introduced onto the 6th position of synthesized quaternized chitosan (QCS), and the azide group replaced the tosyl group to obtain 6-amido-QCS (QCS-N3). The synthesis conditions of the above reactions were optimized. Subsequently, the novel xylan-click-QCS polymer was obtained via click reaction between terminal alkyne groups on the xylan chains and azide groups on QCS. Then, AgNPs and AuNPs were synthesized by adopting the xylan-click-QCS polymer as the reducing and stabilizing agent, and the reaction conditions were optimized to obtain well-dispersed and highly stable nanoparticles. There were two kinds of Ag nanomaterials, with diameters of 10~20 nm and 2~5 nm, respectively, indicating the formation of Ag nanoclusters, except for Ag nanoparticles, in this reaction. The diameter of the synthesized AuNPs was 20~30 nm, which possessed a more uniform size distribution. The Ag nanoclusters with a smaller size (2~5 nm) could inhibit MCF-7 cell proliferation effectively, indicating their application potential in cancer therapy. The study gives a new approach to the high-value utilization of biopolymers.

A Review on Green Synthesis of Nanoparticles and Their Diverse Biomedical and Environmental Applications

In recent times, metal oxide nanoparticles (NPs) have been regarded as having important commercial utility. However, the potential toxicity of these nanomaterials has also been a crucial research concern. In this regard, an important solution for ensuring lower toxicity levels and thereby facilitating an unhindered application in human consumer products is the green synthesis of these particles. Although a naïve approach, the biological synthesis of metal oxide NPs using microorganisms and plant extracts opens up immense prospects for the production of biocompatible and cost-effective particles with potential applications in the healthcare sector. An important area that calls for attention is cancer therapy and the intervention of nanotechnology to improve existing therapeutic practices. Metal oxide NPs have been identified as therapeutic agents with an extended half-life and therapeutic index and have also been reported to have lesser immunogenic properties. Currently, biosynthesized metal oxide NPs are the subject of considerable research and analysis for the early detection and treatment of tumors, but their performance in clinical experiments is yet to be determined. The present review provides a comprehensive account of recent research on the biosynthesis of metal oxide NPs, including mechanistic insights into biological production machinery, the latest reports on biogenesis, the properties of biosynthesized NPs, and directions for further improvement. In particular, scientific reports on the properties and applications of nanoparticles of the oxides of titanium, cerium, selenium, zinc, iron, and copper have been highlighted. This review discusses the significance of the green synthesis of metal oxide nanoparticles, with respect to therapeutically based pharmaceutical applications as well as energy and environmental applications, using various novel approaches including one-minute sonochemical synthesis that are capable of responding to various stimuli such as radiation, heat, and pH. This study will provide new insight into novel methods that are cost-effective and pollution free, assisted by the biodegradation of biomass.

Arum italicum mediated silver nanoparticles: Synthesis and investigation of some biochemical parameters

The science world advancing day by day contributes to living systems in many areas with the development of nanotechnology. Besides being easily obtained from plants, the advantages it brings increase the importance of nanotechnology. Environmentally friendly, economical, and compatible with plants are just a few of the advantages it brings. Silver metal is one of the most preferred active ingredients in nanoparticle synthesis. Arum italicum is used in the treatment of various diseases in the health sector due to the structures it contains. In our study, nanoparticle synthesis was made by using Ag metal with Arum italicum plant. Then, the antimicrobial, DNA damage prevention and DPPH radical quenching activity of Ag NPs/Ai nanoparticles were investigated. The interaction of the plant with Ag, analysis by X-ray diffraction (XRD), UV visible spectrophotometer (UV-vis), scanning electron microscope and energy dispersive X-ray (SEM-EDX), Fourier-converted infrared spectroscopy (FT-IR) methods has been done. It has been observed that Ag NPs/Ai clusters formed by Arum italicum with Ag have an antibacterial effect against Bacillus subtilis, Bacillus cereus, Enterococcus faecalis, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli pathogens. However, an antifungal effect hasn't been observed against Candida albicans fungus. Pseudomonas aeruginosa bacteria exerted a stronger effect than an antibiotic. It is seen that Ag NPs/Ai has a protective and anti-damage effect against DNA damage. The antioxidant effect of Ag NPs/Ai is remarkable when DPPH radical quenching activity is compared to positive control BHA and BHT.

Biosynthesis, characterization, and evaluation of antibacterial and photocatalytic methylene blue dye degradation activities of silver nanoparticles from Streptomyces tuirus strain

Silver nanoparticles (AgNPs) are a promising technology for the design of antimicrobial agents against drug-resistant pathogens. It could also be used for the photocatalytic degradation of dyes used in industries such as methylene blue (MB). In this study, 17 different actinomycetal strains isolated from hydrocarbon-contaminated soils collected from an oil distribution company in Algeria were evaluated for their ability to produce NPs. After a selection process, S16 was the main strain capable of synthesizing AgNPs extracellularly. The strain S16 was determined using molecular identification based on the sequencing of the 16S rDNA gene. Among various techniques used for the synthesis of AgNPS, a technique using a temperature of 30 °C, pH of 7, a metal salt concentration of 1 mM, and a period of 72 h in the dark were found to be more effective in the biosynthesis of the AgNPs. The biosynthesized AgNPs that were analyzed by UV-visible spectroscopy resulted in a specific peak at a wavelength of (λ = 400 nm). The DRX analyses showed characteristic peaks of the AgNPs at (1 1 1), (2 0 0), (2 2 2), and (3 1 1), which validated the presence and crystalline nature of the biosynthesized NPs. Zetasizer analysis showed an average size and zeta potential of 64 nm (-32.3 mV), while the SEM-EDS analysis confirmed the spherical shape of AgNPs and the presence of Ag atoms in the elemental composition. The biosynthesized AgNPs indicated adequate antibacterial activity against 5 out of the 6 strains tested in this study, using minimum inhibitory concentration (MIC) that ranged from 217.18 μg/mL to 1137.5 μg/mL. The AgNPs were combined with commercial antibiotics and the synergistic effect of the combination was also assessed against MRSA which resulted in increased antibacterial activity of AgNPs in the presence of the strain S16. Furthermore, the photocatalytic degradation of the methylene blue (MB) was evaluated under sunlight and UV irradiations using biosynthesized AgNPs. The AgNPs showed photocatalytic decolorization potential of 71.3% for MB dye (20 ppm) under sunlight irradiation within 6 h of incubation, while only 11.25% of the MB dye degraded using UV irradiation.

Therapeutic Applications of Antimicrobial Silver-Based Biomaterials in Dentistry

Microbial infection accounts for many dental diseases and treatment failure. Therefore, the antibacterial properties of dental biomaterials are of great importance to the long-term results of treatment. Silver-based biomaterials (AgBMs) have been widely researched as antimicrobial materials with high efficiency and relatively low toxicity. AgBMs have a broad spectrum of antimicrobial properties, including penetration of microbial cell membranes, damage to genetic material, contact killing, and dysfunction of bacterial proteins and enzymes. In particular, advances in nanotechnology have improved the application value of AgBMs. Hence, in many subspecialties of dentistry, AgBMs have been researched and employed, such as caries arresting or prevention, root canal sterilization, periodontal plaque inhibition, additives in dentures, coating of implants and anti-inflammatory material in oral and maxillofacial surgery. This paper aims to provide an overview of the application approaches of AgBMs in dentistry and present better guidance for oral antimicrobial therapy via the development of AgBMs.

Synthesis of silver nanoparticles using bio valorization coffee waste extract: photocatalytic flow-rate performance, antibacterial activity, and electrochemical investigation

It is well known that biogenic synthesis, as compared to other processes, has proven to be highly effective in the fabrication of silver nanoparticles (AgNPs). Thus, our current study focused on synthesizing AgNPs using coffee waste extract (CWE). CWE contains many compounds identified by HPLC, which reduce, cap, and stabilize AgNPs in its solution. The as-synthesized AgNPs were produced with a monodispersed small size around 20 nm and exhibited in-plane dipole plasmon resonances of hexagonal nanoplates. AgNPs were characterized by both physical and spectroscopic methods, which confirmed their nanoscale dimensions with a hexagonal shape. The as-prepared AgNPs (12 mg) enabled the photodegradation of phenol compounds (20 mL) with a removal efficiency of ~ 94.6% in a short time in the presence of citric acid. Additionally, the second promising application of AgNPs was the tendency to remove the hazard 2,4 dinitroaniline (2,4 DNA) with a percent more than 97% while using only 7 mg of AgNPs. Moreover, the green synthesized AgNPs are superior in inhibiting bacterial growth and killing most infected microbes such as B. subtilis, P. aeruginosa, S. aureus, and E. coli. The electrochemical characteristics of the AgNPs were evaluated using a three-electrode system. The calculated specific capacitance was 280 F g-1 at 0.56 A g-1. Furthermore, after 1000 cycles at 2.2 A g-1, the AgNPs electrode demonstrates an excellent cycling stability behavior with 94.8% capacitance retention. Based on the previous promising results, it can be concluded that CWE is an environmentally benign extract to prepare AgNPs with low cost, saving and easily used for many great domains in photocatalytic, phenol compound removals, and production of functional nanodevices.

Clean approach for chromium removal in aqueous environments and role of nanomaterials in bioremediation: Present research and future perspective

Chromium is an insidious ecological pollutant that is of huge value for its toxicity. The existing ecological objective to lower the heights of toxic materials in marine systems and to stimulate the existing water to recycle after suitable treatment of wastewater. Chromium is a hazard element that appears in discharges of numerous industries that must be diminished to accomplish the goals. Nearly all of the findings described in the literature related to the usage of various materials such as fungal, algal, bacterial biomass, and nanomaterials for chromium adsorption. The current work evaluates the findings of research commenced in the preceding on the use of a variety of adsorbents to decrease chromium concentrations in contaminated waters. This review article focuses on the issue of chromium contamination, its chemistry, causes, consequences, biological agent remediation techniques, and the detailed process of chromium detoxification in microbial cells. It also lists a description of the in situ and ex situ chromium bioremediation methods used. This can help design more effective Cr(VI) removal methods, thus bridging the difference between laboratory discoveries and industrial chromium remediation applications.