Abundance and diversity of copper resistance genes cusA and copA in microbial communities in relation to the impact of copper on Chilean marine sediments

Profiling heavy metals distribution in surface sediments from the perspective of coastal industrial structure and their impacts on bacterial communities

Heavy metal pollution of marine sediments along the coastal industrial parks have always received extensive attention due to their persistent hazard to local marine ecosystem. Despite this, our knowledge about the influence of geography and coastal industrial structures on heavy metal distributions remains little. In this study, surface sediment samples were collected from the coastal zone of the industrial park in Ningbo. The physicochemical properties, heavy metals with ecological risk levels and bacterial structures as well as their relationships in these sediments were comprehensively analyzed. We found that: heavy metal concentrations of surface sediment revealed wide variation between this study sea area and other coastal economic areas; increasing attention should be paid to the Cu, Hg, Cd and As pollution due to their high contamination degree and environment risk; the distribution of heavy metals is closely related to the geographic location and nearshore industrial structures; the physicochemical features (e.g., TN, PHCs and pH) of sediments could better explain the occurrence characteristics of heavy metals present; individual metals (Cu and Cr) significantly affected the bacterial α-diversity; Cr inhibits multiple functional pathways associated with energy metabolism and pollutant degradation; RDA analysis and co-occurrence network confirmed that several heavy metals (especially Zn, Cr, Cu and Cd) exhibited large effects on bacterial community structure; moreover, genera Idiomarina Sulfurovum and Sulfurimonas could be used as biological indicators for specific heavy metals contamination in our study. Our findings provide a novel insight to understand the heavy metal distribution and bacterial variation associated with industrial activities.

Antibacterial Activity of Brass against Antibiotic-Resistant Bacteria following Repeated Exposure to Hydrogen Peroxide/Peracetic Acid and Quaternary Ammonium Compounds

Copper-containing materials are attracting attention as self-disinfecting surfaces, suitable for helping healthcare settings in reducing healthcare-associated infections. However, the impact of repeated exposure to disinfectants frequently used in biocleaning protocols on their antibacterial activity remains insufficiently characterized. This study aimed at evaluating the antibacterial efficiency of copper (positive control), a brass alloy (AB+®) and stainless steel (negative control) after repeated exposure to a quaternary ammonium compound and/or a mix of peracetic acid/hydrogen peroxide routinely used in healthcare settings. A panel of six antibiotic-resistant strains (clinical isolates) was selected for this assessment. After a short (5 min) exposure time, the copper and brass materials retained significantly better antibacterial efficiencies than stainless steel, regardless of the bacterial strain or disinfectant treatment considered. Moreover, post treatment with both disinfectant products, copper-containing materials still reached similar levels of antibacterial efficiency to those obtained before treatment. Antibiotic resistance mechanisms such as efflux pump overexpression did not impair the antibacterial efficiency of copper-containing materials, nor did the presence of one or several genes related to copper homeostasis/resistance. In light of these results, surfaces made out of copper and brass remain interesting tools in the fight against the dissemination of antibiotic-resistant strains that might cause healthcare-associated infections.

Regulatory effects of different anionic surfactants on the transformation of heavy metal fractions and reduction of heavy metal resistance genes in chicken manure compost

Surfactants are widely used as a passivating agent in heavy metal passivation process, but their effect on transformation of heavy metal fraction and reduction of heavy metal resistance genes (MRGs) in composting process is still unknown. The aim of this study was to compare the effects of two anionic surfactants (rhamnolipid and sodium dodecyl sulfate) on heavy metal passivation and resistance gene reduction in chicken manure composting. The results showed that the addition of surfactant can effectively enhance degradation of organic matter (OM). Both surfactants could effectively reduce the bioavailability of heavy metals (HMs) and the relative abundance of resistance genes, especially rhamnolipids. The potential functional bacteria affecting heavy metal passivation were identified by the changes of microbial community. Redundancy analysis (RDA) showed that protease (PRT) activity was the key factor affecting the fractions of the second group of HMs including ZnF1, CuF1, CuF2, PbF1 and PbF3. These findings indicate that addition of anionic surfactants can reduce the bioavailability of HMs and the abundance of resistance genes in compost products, which is of guiding significance for the reduction of health risks in the harmless utilization of livestock and poultry manure.

Bioremediation of Heavy Metals by Rhizobacteria

Heavy elements accumulate rapidly in the soil due to industrial activities and the industrial revolution, which significantly impact the morphology, physiology, and yield of crops. Heavy metal contamination will eventually affect the plant tolerance threshold and cause changes in the plant genome and genetic structure. Changes in the plant genome lead to changes in encoded proteins and protein sequences. Consuming these mutated products can seriously affect human and animal health. Bioremediation is a process that can be applied to reduce the adverse effects of heavy metals in the soil. In this regard, bioremediation using plant growth-promoting rhizobacteria (PGPRs) as beneficial living agents can help to neutralize the negative interaction between the plant and the heavy metals. PGPRs suppress the adverse effects of heavy metals and the negative interaction of plant-heavy elements by different mechanisms such as biological adsorption and entrapment of heavy elements in extracellular capsules, reduction of metal ion concentration, and formation of complexes with metal ions inside the cell.

Decoupled responses of the copepod Eurytemora affinis transcriptome and its microbiota to dissolved copper exposure

Chemical contamination is a common threat to biota thriving in estuarine and coastal ecosystems. Of particular importance is that trace metals tend to accumulate and exert deleterious effects on small invertebrates such as zooplankton, which are essential trophic links between phytoplankton and higher-level consumers in aquatic food webs. Beyond the direct effects of the contamination, we hypothesized that metal exposure could also affect the zooplankton microbiota, which in turn might further impair host fitness. To assess this assumption, copepods (Eurytemora affinis) were sampled in the oligo-mesohaline zone of the Seine estuary and exposed to dissolved copper (25 µg.L^-1) over a 72-hour time period. The copepod response to copper treatment was assessed by determining transcriptomic changes in E. affinis and the alteration of its microbiota. Unexpectedly, very few genes were differentially expressed in the copper-treated copepods compared to the controls for both male and female samples, while a clear dichotomy between sex was highlighted with 80% of the genes showing sex-biased expression. In contrast, copper increased the taxonomic diversity of the microbiota and resulted in substantial compositional changes at both the phyla and genus levels. Phylogenetic reconstruction of the microbiota further suggested that copper mitigated the phylogenetic relatedness of taxa at the basal tree structure of the phylogeny, whereas it strengthened it at the terminal branches. Increased terminal phylogenetic clustering in the copper-treated copepods coincided with higher proportions of bacterial genera previously identified as copper resistant (e.g., Pseudomonas, Acinetobacter, Alkanindiges, Colwellia) and a higher relative abundance of the copA_ox gene encoding a periplasmic inducible multi-copper oxidase. The enrichment in micro-organisms likely to perform copper sequestration and/or enzymatic transformation processes, underlines the need to consider the microbial component during evaluation of the vulnerability of zooplankton to metallic stress.

Phagotrophic Protists Modulate Copper Resistance of the Bacterial Community in Soil

Protist predation is a crucial biotic driver modulating bacterial populations and functional traits. Previous studies using pure cultures have demonstrated that bacteria with copper (Cu) resistance exhibited fitness advantages over Cu-sensitive bacteria under the pressure of protist predation. However, the impact of diverse natural communities of protist grazers on bacterial Cu resistance in natural environments remains unknown. Here, we characterized the communities of phagotrophic protists in long-term Cu-contaminated soils and deciphered their potential ecological impacts on bacterial Cu resistance. Long-term field Cu pollution increased the relative abundances of most of the phagotrophic lineages in Cercozoa and Amoebozoa but reduced the relative abundance of Ciliophora. After accounting for soil properties and Cu pollution, phagotrophs were consistently identified as the most important predictor of the Cu-resistant (Cu^R) bacterial community. Phagotrophs positively contributed to the abundance of a Cu resistance gene (copA) through influencing the cumulative relative abundance of Cu-resistant and -sensitive ecological clusters. Microcosm experiments further confirmed the promotion effect of protist predation on bacterial Cu resistance. Our results indicate that the selection by protist predation can have a strong impact on the Cu^R bacterial community, which broadens our understanding of the ecological function of soil phagotrophic protists.

Ecological landscape explains aquifers microbial structure

Aquifers have significant social, economic, and ecological importance. They supply 30 % of the freshwater for human consumption worldwide, including agricultural and industrial use. Despite aquifers' importance, the relationships between aquifer categories and their inhabiting microbial communities are still unknown. Characterizing variations within microbial communities' function and taxonomy structure at different aquifers could give a panoramic view of patterns that may enable the detection and prediction of environmental impact caused by multiple sources. Using publicly available shotgun metagenomic datasets, we examined whether soil properties, land use, and climate variables would have a more significant influence on the taxonomy and functional structure of the microbial communities than the ecological landscapes of the aquifer (i.e., Karst, Porous, Saline, Geyser, and Porous Contaminated). We found that these categories are stronger predictors of microbial communities' structure than geographical localization. In addition, our results show that microbial richness and dominance patterns are the opposite of those found in multicellular life, where extreme habitats harbour richer functional and taxonomic microbial communities. We found that low-abundant and recently described candidate taxa, such as the chemolithoautotrophic genus Candidatus Altiarcheum and the Candidate phylum Parcubacteria, are the main contributors to aquifer microbial communities' dissimilarities. Genes related to gram-negative bacteria proteins, cell wall structures, and phage activity were the primary contributors to aquifer microbial communities' dissimilarities among the aquifers' ecological landscapes. The results reported in the present study highlight the utility of using ecological landscapes for investigating aquifer microbial communities. In addition, we suggest that functions played by recently described and low abundant bacterial groups need further investigation once they might affect water quality, geochemical cycles, and the effects of anthropogenic disturbances such as pollution and climatic events on aquifers.

Antibacterial and Antibiofilm Activity of Nanostructured Copper Films Prepared by Ionized Jet Deposition

Metal coatings represent good strategies to functionalize surfaces/devices and limit bacterial contamination/colonization thanks to their pleiotropic activity and their ability to prevent the biofilm formation. Here, we investigated the antibacterial and antibiofilm capacity of copper coatings deposited through the Ionized Jet Deposition (IJD) on the Calgary Biofilm Device (CBD) against the growth of two gram-negative and two gram-positive pathogenic strains. Three areas (i.e., (+)Cu, (++)Cu, and (+++)Cu based on the metal amount) on the CBD were obtained, presenting nanostructured coatings with high surface homogeneity and increasing dimensions of aggregates from the CBD periphery to the centre. The coatings in (++)Cu and (+++)Cu were efficient against the planktonic growth of the four pathogens. This antibacterial effect decreased in (+)Cu but was still significant for most of the pathogens. The antibiofilm efficacy was significant for all the strains and on both coated and uncoated surfaces in (+++)Cu, whereas in (++)Cu the only biofilms forming on the coated surfaces were inhibited, suggesting that the decrease of the metal on the coatings was associated to a reduced metal ion release. In conclusion, this work demonstrates that Cu coatings deposited by IJD have antibacterial and antibiofilm activity against a broad range of pathogens indicating their possible application to functionalize biomedical devices.

Metagenomic and genomic characterization of heavy metal tolerance and resistance genes in the rhizosphere microbiome of Avicennia germinans in a semi-arid mangrove forest in the tropics

Mangroves are often exposed to heavy metals that accumulate in the food chain, generate toxicity to mangrove plants and affect microbial diversity. This study determined the abundance of genes associated with resistance and tolerance to heavy metals in the rhizosphere microbiome of Avicennia germinans from a semi-arid mangrove of La Guajira-Colombia by metagenomics and genomics approach. Twenty-eight genes associated with tolerance and 49 genes related to resistance to heavy metals were detected. Genes associated with tolerance and resistance to Cu, especially cusA and copA, were the most abundant. The highest number of genes for tolerance and resistance were for Zn and Co, respectively. The isolate Vibrio fluvialis showed the ability to tolerate Cu, Ni, Zn, and Cd. This work used a complementary approach of metagenomics and genomics to characterize the potential of mangrove microorganisms to tolerate and resist heavy metals and the influence of salinity on their abundance.

Distribution of quinolone and macrolide resistance genes and their co-occurrence with heavy metal resistance genes in vegetable soils with long-term application of manure

The spread of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) has become an increasingly serious global public health issue. This study investigated the distribution characteristics and influencing factors of ARB and ARGs in greenhouse vegetable soils with long-term application of manure. Five typical ARGs, four heavy metal resistance genes (MRGs), and two mobile genetic elements (MGEs) were quantified by real-time quantitative polymerase chain reaction (qPCR). The amount of ARB in manure-improved soil greatly exceeded that in control soil, and the bacterial resistance rate decreased significantly with increases in antibiotic concentrations. In addition, the resistance rate of ARB to enrofloxacin (ENR) was lower than that of tylosin (TYL). Real-time qPCR results showed that long-term application of manure enhanced the relative abundance of ARGs in vegetable soils, and the content and proportion of quinolone resistance genes were higher than those of macrolide resistance genes. Redundancy analysis (RDA) showed that qepA and qnrS significantly correlated with total and available amounts of Cu and Zn, highlighting that certain heavy metals can influence persistence of ARGs. Integrase gene intI1 correlated significantly with the relative abundance of qepA, qnrS, and ermF, suggesting that intI1 played an important role in the horizontal transfer of ARGs. Furthermore, there was a weakly but not significantly positive correlation between specific detected MRGs and ARGs and MGEs. The results of this study enhance understanding the potential for increasing ARGs in manure-applied soil, assessing ecological risk and reducing the spread of ARGs.

MRG Chip: A High-Throughput qPCR-Based Tool for Assessment of the Heavy Metal(loid) Resistome

Bacterial metal detoxification mechanisms have been well studied for centuries in pure culture systems. However, profiling metal resistance determinants at the community level is still a challenge due to the lack of comprehensive and reliable quantification tools. Here, a novel high-throughput quantitative polymerase chain reaction (HT-qPCR) chip, termed the metal resistance gene (MRG) chip, has been developed for the quantification of genes involved in the homeostasis of 9 metals. The MRG chip contains 77 newly designed degenerate primer sets and 9 published primer sets covering 56 metal resistance genes. Computational evaluation of the taxonomic coverage indicated that the MRG chip had a broad coverage matching 2 kingdoms, 29 phyla, 64 classes, 130 orders, 226 families, and 382 genera. Temperature gradient PCR and HT-qPCR verified that 57 °C was the optimal annealing temperature, with amplification efficiencies of over 94% primer sets achieving 80-110%, with R² > 0.993. Both computational evaluation and the melting curve analysis of HT-qPCR validated a high specificity. The MRG chip has been successfully applied to characterize the distribution of diverse metal resistance determinants in natural and human-related environments, confirming its wide scope of application. Collectively, the MRG chip is a powerful and efficient high-throughput quantification tool for exploring the microbial metal resistome.

Abundant microbial communities act as more sensitive bio-indicators for ecological evaluation of copper mine contamination than rare taxa in river sediments

Bacterial and fungal communities have been widely applied as bio-indicators for ecological evaluation of copper (Cu) mine pollution in river sediments. However, the response pattern of their abundant and rare sub-communities is still unknown, limiting the further development of biological diagnostics. Here, the alpha-diversity, community composition, environmental contribution and co-occurrence network of total, abundant and rare taxa for bacteria and fungi in the Jiaopingdu Cu Mine wastewater treatment plant (WWTP) were investigated through high-throughput sequencing. The results revealed different responses of microbial alpha-diversity for abundant and rare sub-communities. The abundant taxa were ubiquitous in all sediments, while rare taxa exhibited increases of species richness in polluted areas because of heterochthonous inputs of WWTP drainage. Nevertheless, the variations of community composition were consistent for bacterial and fungal abundant and rare taxa, all of which showed significant dissimilarity between control and polluted areas. Distance-decay relationship and canonical correlation analysis indicated that abundant taxa assemblies (r_bacteria = -0.924, r_fungi = -0.684) were more strongly driven by environmental changes than rare ones (r_bacteria = -0.626, r_fungi = -0.349), because abundant microbes had higher proportions of significant variations in abundance. Co-occurrence networks revealed more keystone species with high node degree and centrality among abundant taxa compared with rare ones. Moreover, bacterial abundant and rare taxa were more sensitive to Cu mine pollution than relevant fungal taxa owing to different Cu tolerance. In conclusion, among all microbial sub-communities, abundant bacteria had the highest environmental sensitivity, suggesting their important application in biological diagnosis of Cu mine pollution. Accordingly, the abundant taxa could act as "key reservoir" for future selection of specific indicator species, for example Thiobacillus, while rare taxa no longer need excessive in-depth analysis, which would greatly improve microbial diagnosis efficiency.

Dynamics of Microbial Communities during the Removal of Copper and Zinc in a Sulfate-Reducing Bioreactor with a Limestone Pre-Column System

Biological treatment using sulfate-reducing bacteria (SRB) is a promising approach to remediate acid rock drainage (ARD). Our purpose was to assess the performance of a sequential system consisting of a limestone bed filter followed by a sulfate-reducing bioreactor treating synthetic ARD for 375 days and to evaluate changes in microbial composition. The treatment system was effective in increasing the pH of the ARD from 2.7 to 7.5 and removed total Cu(II) and Zn(II) concentrations by up to 99.8% and 99.9%, respectively. The presence of sulfate in ARD promoted sulfidogenesis and changed the diversity and structure of the microbial communities. Methansarcina spp. was the most abundant amplicon sequence variant (ASV); however, methane production was not detected. Biodiversity indexes decreased over time with the bioreactor operation, whereas SRB abundance remained stable. Desulfobacteraceae, Desulfocurvus, Desulfobulbaceae and Desulfovibrio became more abundant, while Desulfuromonadales, Desulfotomaculum and Desulfobacca decreased. Geobacter and Syntrophobacter were enriched with bioreactor operation time. At the beginning, ASVs with relative abundance <2% represented 65% of the microbial community and 21% at the end of the study period. Thus, the results show that the microbial community gradually lost diversity while the treatment system was highly efficient in remediating ARD.

Isolation of a Dissimilatory Iodate-Reducing Aromatoleum sp. From a Freshwater Creek in the San Francisco Bay Area

Recent reports of dissimilatory iodate-reducing microorganisms (DIRM) have arisen from studies of bacteria in marine environments. These studies described the physiology and distribution of DIRM while also demonstrating their presence in iodine-rich marine environments. We posited that despite lower iodine concentrations, terrestrial and freshwater ecosystems should also harbor DIRM. We established numerous enrichments from coastal and freshwater environments that actively remove amended iodate. We describe the physiology and genome of a new DIRM isolate, Aromatoleum toluclasticum sp. TC-10, emerging from a freshwater creek microcosm. Like other DIRM, A. toluclasticum sp. TC-10 couples acetate oxidation to iodate reduction with a concomitant increase in the OD₆₀₀. Our results indicate that A. toluclasticum sp. TC-10 performs dissimilatory iodate reduction (DIR) using the recently described iodate reductase (Idr). We provide further evidence of horizontal gene transfer of the idr genes by demonstrating the lack of Idr in the closely related (99.93% 16S rDNA sequence identity) A. toluclasticum sp. MF63 and describe the heterogeneity of the accessory proteins associated with the iodate reduction island (IRI). These observations provide additional evidence that DIR is a horizontally acquired metabolism with broad environmental distribution beyond exclusively marine environments.

Genetic and phylogenetic analysis of dissimilatory iodate-reducing bacteria identifies potential niches across the world's oceans

Iodine is oxidized and reduced as part of a biogeochemical cycle that is especially pronounced in the oceans, where the element naturally concentrates. The use of oxidized iodine in the form of iodate (IO3-) as an electron acceptor by microorganisms is poorly understood. Here, we outline genetic, physiological, and ecological models for dissimilatory IO3- reduction to iodide (I-) by a novel estuarine bacterium, Denitromonas sp. IR-12. Our results show that dissimilatory iodate reduction (DIR) by strain IR-12 is molybdenum-dependent and requires an IO3- reductase (idrA) and likely other genes in a mobile cluster with a conserved association across known and predicted DIR microorganisms (DIRM). Based on genetic and physiological data, we propose a model where three molecules of IO3- are likely reduced to three molecules of hypoiodous acid (HIO), which rapidly disproportionate into one molecule of IO3- and two molecules of iodide (I-), in a respiratory pathway that provides an energy yield equivalent to that of nitrate or perchlorate respiration. Consistent with the ecological niche expected of such a metabolism, idrA is enriched in the metagenome sequence databases of marine sites with a specific biogeochemical signature (high concentrations of nitrate and phosphate) and diminished oxygen. Taken together, these data suggest that DIRM help explain the disequilibrium of the IO3-:I- concentration ratio above oxygen-minimum zones and support a widespread iodine redox cycle mediated by microbiology.

Diversity, Functions and Antibiotic Resistance of Sediment Microbial Communities From Lake Geneva Are Driven by the Spatial Distribution of Anthropogenic Contamination

Lake sediments are natural receptors for a wide range of anthropogenic contaminants including organic matter and toxicants such as trace metals, polycyclic aromatic hydrocarbons, polychlorinated biphenyls that accumulate over time. This contamination can impact benthic communities, including microorganisms which play a crucial role in biogeochemical cycling and food-webs. The present survey aimed at exploring whether anthropogenic contamination, at a large lake scale, can influence the diversity, structure and functions of microbial communities associated to surface sediment, as well as their genetic potential for resistance to metals and antibiotics. Changes in the characteristics of these communities were assessed in surface sediments collected in Lake Geneva from eight sampling sites in October 2017 and May 2018. These sampling sites were characterized by a large concentration range of metal and organic compound contamination. Variation between the two sampling periods were very limited for all sampling sites and measured microbial parameters. In contrast, spatial variations were observed, with two sites being distinct from each other, and from the other six sites. Benthic communities from the most contaminated sampling site (Vidy Bay, near the city of Lausanne) were characterized by the lowest bacterial and archaeal diversity, a distinct community composition, the highest abundance of antibiotic resistance genes and functional (respiration, denitrification, methanogenesis, phosphatase, and beta-glucosidase) activity levels. The second sampling site which is highly influenced by inputs from the Rhône River, exhibited low levels of diversity, a distinct community composition, high abundance of antibiotic resistance genes and the highest bacterial abundance. Overall, our results suggest that local anthropogenic contamination, including organic matter and toxicants, is a major driver of the diversity and functioning of sediment-microbial communities in Lake Geneva. This highlights the need to consider benthic microbial communities and a suite of complementary ecotoxicological endpoints for more effective environmental risk assessments of contaminants in lake sediments.

First Description of Various Bacteria Resistant to Heavy Metals and Antibiotics Isolated from Polluted Sites in Tunisia

Environmental bacteria belonging to various families were isolated from polluted water collected from ten different sites in Tunisia. Sites were chosen near industrial and urban areas known for their high degree of pollution. The aim of this study was to investigate cross-resistance between heavy metals (HM), i.e., silver, mercury and copper (Ag, Hg, and Cu), and antibiotics. In an initial screening, 80 isolates were selected on ampicillin, and 39 isolates, retained for further analysis, could grow on a Tris-buffered mineral medium with gluconate as carbon source. Isolates were identified based on their 16S rRNA gene sequence. Results showed the prevalence of antibiotic resistance genes, especially all isolates harbored the bla_TEM gene. Some of them (15.38%) harbored bla_SHV. Moreover, several were even ESBLs and MBLs-producers, which can threaten the human health. On the other hand, 92.30%, 56.41%, and 51.28% of the isolates harbored the heavy metals resistance genes silE, cusA, and merA, respectively. These genes confer resistance to silver, copper, and mercury. A cross-resistance between antibiotics and heavy metals was detected in 97.43% of our isolates.

Sewage sludge in agriculture - the effects of selected chemical pollutants and emerging genetic resistance determinants on the quality of soil and crops - a review

In line with sustainable development principles and in order to combat climate change, which contributes to progressive soil depletion, various solutions are being sought to use treated sewage sludge as a soil amendment to improve soil quality and enrich arable soils with adequate amounts of biogenic compounds. This review article focuses on the effects of the agricultural use of biosolids on the environment. The article reviews the existing knowledge on selected emerging contaminants in treated sewage sludge and describes the impact of these pollutants on the environment and living organisms based on 183 publications selected from over 16,000 papers on related topics published over the last ten years. This study deals not only with chemical contaminants but also genetic determinants of resistance to these compounds. Current research has questioned the agricultural use of biosolids due to the presence of mutual interactions between antibiotics, heavy metals, the genetic determinants of resistance (antibiotic resistance genes - ARGs and heavy metal resistance genes - HMRGs) and non-steroidal anti-inflammatory drugs as well as the risks associated with their transfer to the environment. This study emphasizes the need for more extensive legal regulations that account for other pollutants of environmental concern (PEC), particularly in countries where sewage sludge is applied in agriculture most extensively. Future research should focus on more effective methods of eliminating PEC from sewage sludge, especially from the sludge that is used to fertilize agricultural land, because even small amounts of these micropollutants can have serious implications for the health and life of humans and animals.

Towards a general model for predicting minimal metal concentrations co-selecting for antibiotic resistance plasmids

Many antibiotic resistance genes co-occur with resistance genes for transition metals, such as copper, zinc, or mercury. In some environments, a positive correlation between high metal concentration and high abundance of antibiotic resistance genes has been observed, suggesting co-selection due to metal presence. Of particular concern is the use of copper and zinc in animal husbandry, leading to potential co-selection for antibiotic resistance in animal gut microbiomes, slurry, manure, or amended soils. For antibiotics, predicted no effect concentrations have been derived from laboratory measured minimum inhibitory concentrations and some minimal selective concentrations have been investigated in environmental settings. However, minimal co-selection concentrations for metals are difficult to identify. Here, we use mathematical modelling to provide a general mechanistic framework to predict minimal co-selective concentrations for metals, given knowledge of their toxicity at different concentrations. We apply the method to copper (Cu), zinc (Zn), mercury (Hg), lead (Pb) and silver (Ag), predicting their minimum co-selective concentrations in mg/L (Cu: 5.5, Zn: 1.6, Hg: 0.0156, Pb: 21.5, Ag: 0.152). To exemplify use of these thresholds, we consider metal concentrations from slurry and slurry-amended soil from a UK dairy farm that uses copper and zinc as additives for feed and antimicrobial footbath: the slurry is predicted to be co-selective, but not the slurry-amended soil. This modelling framework could be used as the basis for defining standards to mitigate risks of antimicrobial resistance applicable to a wide range of environments, including manure, slurry and other waste streams.

Relationship Between Heavy Metal Accumulation in Fish Muscle and Heavy Metal Resistance Genes in Bacteria Isolated from Fish

Cadmium, cobalt, copper, nickel, and zinc are the most common pollutant heavy metals that can be discharged into the marine environment with different sources. Whiting (Merlangius merlangus) and mullet (Mullus barbatus) were sampled in four seasons in a year to determine Cd, Co, Cu, Ni, and Zn levels in the muscle and to determine heavy metal resistance genes (MRGs) such as copA, czc, and ncc genes in coliform bacteria isolated from the fish. In both species, zinc was the most abundant metal, while Cd and the Co levels were scarce. Co level was significantly higher in summer in mullet than that of whiting (p < 0.001). The most prevalent MRGs was determined as copA (46.2%) followed by czc (35.8%) and ncc (17.9%). Increased Co and Ni level in the muscle significantly affected the presence of ncc gene in bacteria, while the presence of ncc and copA genes was affected by Ni and Cu levels found in the fish muscle. There was a significant positive correlation between Cd level in the muscle and presence of czc and ncc gene in the bacteria (p < 0.029). When the levels of Cu, Zn, and Cd increased in the muscle of the fish, occurrence of MRGs genes was increased significantly (p < 0.0001). A strong positive correlation was found between heavy metal resistance levels in fish and the prevalence of E. coli and coliforms that harbor heavy metal resistance genes which will be a problem in aquaculture, aquatic ecosystem, and public health.

Metal resistance genes enrichment in marine biofilm communities selected by biocide-containing surfaces in temperate and tropical coastal environments

Microorganisms able to form biofilms in marine ecosystems are selected depending on immersed surfaces and environmental conditions. Cell attachment directly on toxic surfaces like antifouling coatings suggests a selection of tolerant (or resistant) organisms with characteristics conferring adaptive advantages. We investigated if environment would drive metal resistance gene abundance in biofilms on artificial surfaces. Biofilms were sampled from three surfaces (a PVC reference and two antifouling coatings) deployed in three coastal waters with dissimilar characteristics: The Mediterranean Sea (Toulon) and Atlantic (Lorient) and Indian (Reunion) Oceans. The two coatings differed in metals composition, either Cu thiocyanate and Zn pyrithione (A3) or Cu2O (Hy). Metal resistance genes (MRG) specific to copper (cusA, copA, cueO) or other metals (czcA and pbrT) were monitored with qPCR in parallel to the microbial community using 16S rRNA gene metabarcoding. A lower α-diversity on A3 or Hy than on PVC was observed independent on the site. Weighted Unifrac suggested segregation of communities primarily by surface, with lower site effect. Metacoder log2 fold change ratio and LeFSe discrimination suggested Marinobacter to be specific of Hy and Altererythrobacter, Erythrobacter and Sphingorhabdus of A3. Likewise, the relative abundance of MRG (MRG/bacterial 16S rRNA) varied between surfaces and sites. A3 presented the greatest relative abundances for cusA, cueO and czcA. The latter could only be amplified from A3 communities, except at Toulon. Hy surface presented the highest relative abundance for copA, specifically at Lorient. These relative abundances were correlated with LeFSe discriminant taxa. Dasania correlated positively with all MRG except cueO. Marinobacter found in greater abundance in Hy biofilm communities correlated with the highest abundances of copA and Roseovarius with czcA. These results prove the selection of specific communities with abilities to tolerate metallic biocides forming biofilms over antifouling surfaces, and the secondary but significant influence of local environmental factors.

Recent advances in exploring the heavy metal(loid) resistant microbiome

Heavy metal(loid)s exert selective pressure on microbial communities and evolution of metal resistance determinants. Despite increasing knowledge concerning the impact of metal pollution on microbial community and ecological function, it is still a challenge to identify a consistent pattern of microbial community composition along gradients of elevated metal(loid)s in natural environments. Further, our current knowledge of the microbial metal resistome at the community level has been lagging behind compared to the state-of-the-art genetic profiling of bacterial metal resistance mechanisms in a pure culture system. This review provides an overview of the core metal resistant microbiome, development of metal resistance strategies, and potential factors driving the diversity and distribution of metal resistance determinants in natural environments. The impacts of biotic factors regulating the bacterial metal resistome are highlighted. We finally discuss the advances in multiple technologies, research challenges, and future directions to better understand the interface of the environmental microbiome with the metal resistome. This review aims to highlight the diversity and wide distribution of heavy metal(loid)s and their corresponding resistance determinants, helping to better understand the resistance strategy at the community level.

Changes in sediment microbial diversity following chronic copper-exposure induce community copper-tolerance without increasing sensitivity to arsenic

Sediment microbial communities were exposed for 21 days to an environmental concentration of copper to assess Cu-induced composition changes and resulting effects on microbial sensitivity to acute Cu and As toxicity. Chronic Cu exposure reduced the diversity of the bacterial and archaeal communities from Day 0 to Day 21. The pollution-induced community tolerance concept (PICT) predicts that loss of the most sensitive taxa and gain of more tolerant ones should increase the capacity of Cu-exposed communities to tolerate acute Cu toxicity. Although diversity loss and functional costs of adaptation could have increased their sensitivity to subsequent toxic stress, no increased sensitivity to As was observed. PICT responses varied according to heterotrophic activity, selected as the functional endpoint for toxicity testing, with different results for Cu and As. This suggests that induced tolerance to Cu and As was supported by different species with different metabolic capacities. Ecological risk assessment of contaminants would gain accuracy from further research on the relative contribution of tolerance acquisition and co-tolerance processes on the functional response of microbial communities.

Heavy metal pollution and co-selection for antibiotic resistance: A microbial palaeontology approach

Frequent and persistent heavy metal pollution has profound effects on the composition and activity of microbial communities. Heavy metals select for metal resistance but can also co-select for resistance to antibiotics, which is a global health concern. We here document metal concentration, metal resistance and antibiotic resistance along a sediment archive from a pond in the North West of the United Kingdom covering over a century of anthropogenic pollution. We specifically focus on zinc, as it is a ubiquitous and toxic metal contaminant known to co-select for antibiotic resistance, to assess the impact of temporal variation in heavy metal pollution on microbial community diversity and to quantify the selection effects of differential heavy metal exposure on antibiotic resistance. Zinc concentration and bioavailability was found to vary over the core, likely reflecting increased industrialisation around the middle of the 20th century. Zinc concentration had a significant effect on bacterial community composition, as revealed by a positive correlation between the level of zinc tolerance in culturable bacteria and zinc concentration. The proportion of zinc resistant isolates was also positively correlated with resistance to three clinically relevant antibiotics (oxacillin, cefotaxime and trimethoprim). The abundance of the class 1 integron-integrase gene, intI1, marker for anthropogenic pollutants correlated with the prevalence of zinc- and cefotaxime resistance but not with oxacillin and trimethoprim resistance. Our microbial palaeontology approach reveals that metal-contaminated sediments from depths that pre-date the use of antibiotics were enriched in antibiotic resistant bacteria, demonstrating the pervasive effects of metal-antibiotic co-selection in the environment.

Stability of in situ immobilization of trace metals with different amendments revealed by microbial 13C-labelled wheat root decomposition and efflux-mediated metal resistance of soil bacteria

The aim of the present study was to prove the long-term efficiency of the amendments zerovalent iron grit, zeolite, and Divergan® for trace metal remediation in heavily contaminated soils and to attain a recovery of microbial functionality and diversity by remediation. For immobilization of the trace metals the amendments zerovalent iron grit, natural zeolite, and Divergan® were used. Trace metal total and mobile contents were determined and bacterial communities were assessed after a SIP experiment with ¹³C-labelled wheat root by Ion-Torrent Sequencing targeting the bacterial 16S rRNA gene and two trace metal resistant genes for copper and cadmium (copA and czcA gene). The results show that the remediation effect of the three amendments is still stable after five years. The mobile trace metal contents were significantly (≤0.001) reduced in all treatments, except the Cu content in the zeolite treatment. A higher diversity in active metabolizing and growing soil bacteria was observed in remediated soils as compared to the non-remediated control, especially for the Divergan® treatment. The bacterial genera Kribbella, Glycomyces, Inquilinus, Nocardioides, and Lysobacter are the most significantly enriched genera in the ¹³C fractions of the treated samples. The occurrence of bacterial families, which could be identified carrying efflux-mediated metal resistance genes for Cd/Zn and Cu, were reduced in the remediated soils as compared to the non-remediated control. The most abundant bacterial family for the copA and the czcA gene is Xanthomonadaceae. The pH-value and the trace metal concentration could be identified as key drivers of bacterial community composition, and functions in trace metal contaminated soils and remediated soils.

Key role of cyromazine in the distribution of antibiotic resistance genes and bacterial community variation in aerobic composting

The risks that have not been noted so far have come from the use of non-antibiotics. In this study, non-antibiotic drug (cyromazine) was used in composting to investigate its possible effects on the distribution of ARGs and changes of bacterial community. Results showed that cyromazine increased the abundances of highly-risky ARGs (bla_CTX-M and bla_VIM), and heavy metal resistance genes (MRGs). Low and high concentrations of cyromazine increased the abundance of Tn916/1545 by 18.27% and 64.26%, respectively, compared with the control treatment. Mobile genetic elements (MGEs) and MRGs were not the major cause of the dynamic changes in ARGs, but instead the bacterial community succession changed according to the moisture content, pH, and bio-Cu. Network analysis showed that Proteobacteria and Actinobacteria were the major hosts for ARGs, and there was a significant correlation between tcrB, sul1 and Tn916/1545.

Antimicrobial properties of a novel copper-based composite coating with potential for use in healthcare facilities

Background

Healthcare-associated infections (HAIs) have a major impact on public health worldwide. Particularly, hospital surfaces contaminated with bacterial pathogens are often the origin of both sporadic cases and outbreaks of HAIs. It has been demonstrated that copper surfaces reduce the microbial burden of high touch surfaces in the hospital environment. Here we report the antimicrobial characterization of a novel composite coating with embedded copper particles, named Copper Armour™.

Methods

The Copper Armour™ bactericidal activity was evaluated in in vitro assays against several bacterial pathogens, including Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli O157:H7 and Listeria monocytogenes. Additionally, its antimicrobial properties were also evaluated in a pilot study over a nine-week period at an adult intensive care unit. For this, four high touch surfaces, including bed rails, overbed table, bedside table and IV Pole, were coated with Cooper Armour™, and its microbial burden was determined over a nine-week period.

Results

Copper Armour™ coated samples showed an in vitro reduction in bacterial burden of > 99.9% compared to control samples. Moreover, pilot study results indicate that Copper Armour™ significantly reduces the level of microbial contamination on high-touch surfaces in the hospital environment, as compared with standard surfaces.

Conclusions

Based on its antimicrobial properties, Copper Armour™ is a novel self-sanitizing coating that exhibits bactericidal activity against important human pathogens and significantly reduces the microbial burden of hospital surfaces. This composite could be used as a self-sanitizing coating to complement infection control strategies in healthcare facilities.

Experimental Warming Differentially Influences the Vulnerability of Phototrophic and Heterotrophic Periphytic Communities to Copper Toxicity

Aquatic ecosystems are generally subjected to multiple perturbations due to simultaneous or successive combinations of various natural and anthropogenic environmental pressures. To better assess and predict the resulting ecological consequences, increasing attention should be given to the accumulation of stresses on freshwater ecosystems and its effects on the vulnerability of aquatic organisms, including microbial communities, which play crucial functional roles. Here we used a microcosm study to assess the influence of an experimental warming on the vulnerability of phototrophic and heterotrophic periphytic communities to acute and chronic copper (Cu) toxicity. Natural periphytic communities were submitted for 4 weeks to three different temperatures (18, 23, and 28°C) in microcosms contaminated (at about 15 μg L^-1) or not with Cu. The vulnerability of both phototrophic and heterotrophic microbial communities to subsequent acute Cu stress was then assessed by measuring their levels of sensitivity to Cu from bioassays targeting phototrophic (photosynthetic activity) and heterotrophic (β-glucosidase and leucine aminopeptidase extracellular enzymatic activities) microbial functions. We postulated that both the increase in temperature and the chronic Cu exposure would modify microbial community structure, thus leading to changes in the capacity of phototrophic and heterotrophic communities to tolerate subsequent acute exposure to Cu. Our results demonstrated that the influence of temperature on the vulnerability of phototrophic and heterotrophic microbial communities to Cu toxicity can vary greatly according to function studied. These findings emphasize the importance of considering different functional compartments and different functional descriptors to better assess the vulnerability of periphyton to multiple stresses and predict the risks induced by multiple stressors for ecosystem balance and functioning.

Contact killing and antimicrobial properties of copper

With the emergence of antibiotic resistance, the interest for antimicrobial agents has recently increased again in public health. Copper was recognized in 2008 by the United States Environmental Protection Agency (EPA) as the first metallic antimicrobial agent. This led to many investigations of the various properties of copper as an antibacterial, antifungal and antiviral agent. This review summarizes the latest findings about 'contact killing', the mechanism of action of copper nanoparticles and the different ways micro-organisms develop resistance to copper.

Fate of antibiotic resistance genes and metal resistance genes during thermophilic aerobic digestion of sewage sludge

This study examines the fate of twenty-three representative antibiotic resistance genes (ARGs) encoding tetracyclines, sulfonamides, quinolones, β-lactam antibiotics, macrolides, florfenicol and multidrug resistance during thermophilic aerobic digestion (TAD) of sewage sludge. The bacterial community, class 1 integrons (intI1) and four metal resistance genes (MRGs) were also quantified to determine the key drivers of changes in ARGs during TAD. At the end of digestion, significant decreases in the quantities of ARGs, MRGs and intI1 as well as 16S rRNA genes were observed. Partial redundancy analysis (RDA) showed that shifts in temperature were the key factors affecting a decrease in ARGs. Shifts in temperature led to decreased amounts of ARGs by reducing resistome and bacterial diversity, rather than by lowering horizontal transfer potential via intI1 or co-resistance via MRGs.

Effects of Copper Addition on Copper Resistance, Antibiotic Resistance Genes, and intl1 during Swine Manure Composting

Copper is one of the most abundant heavy metals present in swine manure. In this study, a laboratory-scale aerobic composting system was amended with Cu at three levels (0, 200, and 2000 mg kg^-1, i.e., control, Cu200, and Cu2000 treatments, respectively) to determine its effect on the fate of copper resistance genes [copper resistance genes (CRGs): pcoA, cusA, copA, and tcrB], antibiotic resistance genes [antibiotic resistance genes (ARGs): erm(A) and erm(B)], and intl1. The results showed that the absolute abundances of pcoA, tcrB, erm(A), erm(B), and intl1 were reduced, whereas those of copA and cusA increased after swine manure composting. Redundancy analysis showed that temperature significantly affected the variations in CRGs, ARGs, and intl1. The decreases in CRGs, ARGs, and intI1 were positively correlated with the exchangeable Cu levels. The bacterial community could be grouped according to the composting time under different treatments, where the high concentration of copper had a more persistent effect on the bacterial community. Network analysis determined that the co-occurrence of CRGs, ARGs, and intI1, and the bacterial community were the main contributors to the changes in CRGs, ARG, and intl1. Thus, temperature, copper, and changes in the bacterial community composition had important effects on the variations in CRGs, ARGs, and intl1 during manure composting in the presence of added copper.

-Genomic data mining of the marine actinobacteria Streptomyces sp. H-KF8 unveils insights into multi-stress related genes and metabolic pathways involved in antimicrobial synthesis

Streptomyces sp. H-KF8 is an actinobacterial strain isolated from marine sediments of a Chilean Patagonian fjord. Morphological characterization together with antibacterial activity was assessed in various culture media, revealing a carbon-source dependent activity mainly against Gram-positive bacteria (S. aureus and L. monocytogenes). Genome mining of this antibacterial-producing bacterium revealed the presence of 26 biosynthetic gene clusters (BGCs) for secondary metabolites, where among them, 81% have low similarities with known BGCs. In addition, a genomic search in Streptomyces sp. H-KF8 unveiled the presence of a wide variety of genetic determinants related to heavy metal resistance (49 genes), oxidative stress (69 genes) and antibiotic resistance (97 genes). This study revealed that the marine-derived Streptomyces sp. H-KF8 bacterium has the capability to tolerate a diverse set of heavy metals such as copper, cobalt, mercury, chromate and nickel; as well as the highly toxic tellurite, a feature first time described for Streptomyces. In addition, Streptomyces sp. H-KF8 possesses a major resistance towards oxidative stress, in comparison to the soil reference strain Streptomyces violaceoruber A3(2). Moreover, Streptomyces sp. H-KF8 showed resistance to 88% of the antibiotics tested, indicating overall, a strong response to several abiotic stressors. The combination of these biological traits confirms the metabolic versatility of Streptomyces sp. H-KF8, a genetically well-prepared microorganism with the ability to confront the dynamics of the fjord-unique marine environment.

Sludge bio-drying: Effective to reduce both antibiotic resistance genes and mobile genetic elements

Sewage sludge is considered as one of major contributors to the increased environmental burden of ARGs. Sludge bio-drying was increasingly adopted due to its faster sludge reduction compared with composting. The fate of ARGs during full-scale sludge bio-drying was investigated to determine whether it could effectively reduce ARGs, and the contributions of bacterial community, horizontal gene transfer (HGT) through mobile genetic elements (MGEs) and co-selection from heavy metals to ARGs profiles were discussed in detail. Two piles with different aeration strategies (Pile I, the improved and Pile II, the control) were operated to elucidate effects of aeration strategy on ARGs profiles. Results showed that sludge bio-drying could effectively reduce both most of targeted ARGs (0.4-3.1 logs) and MGEs (0.8-3.3 logs) by the improved aeration strategy, which also enhanced both the sludge bio-drying performance and ARGs reduction. The enrichment of ARGs including ermF, tetX and sulII could be well explained by the evolution of bioavailable heavy metals, not HGT through MGEs, and their potential host bacteria mainly existed in Bacteroidetes. Although changes of bacterial community contributed the most to ARGs profiles, HGT through MGEs should be paid more attention especially in the thermophilic stage of sludge bio-drying.

Effect of red mud addition on tetracycline and copper resistance genes and microbial community during the full scale swine manure composting

Swine manure has been considered as the reservoir of antibiotic resistance genes (ARGs). Composting is one of the most suitable technologies for treating livestock manures, and red mud was proved to have a positive effect on nitrogen conservation during composting. This study investigated the abundance of eight tetracycline and three copper resistance genes, the bacterial community during the full scale swine manure composting with or without addition of red mud. The results showed that ARGs in swine manure could be effectively removed through composting (reduced by 2.4log copies/g TS), especially during the thermophilic phase (reduced by 1.5log copies/g TS), which the main contributor might be temperature. Additionally, evolution of bacterial community could also have a great influence on ARGs. Although addition of red mud could enhance nitrogen conservation, it obviously hindered removal of ARGs (reduced by 1.7log copies/g TS) and affected shaping of bacterial community during composting.

Expression of copper-resistance genes in microbial communities under copper stress and oxic/anoxic conditions

Microorganisms have developed copper-resistance mechanisms in order to survive in contaminated environments. The abundance and expression of the copper-resistance genes cusA and copA, encoding respectively for a Resistance Cell Nodulation protein and for a P-type ATP-ase pump, was assessed along a gradient of copper concentration in microcosms prepared from Seine estuary mudflat sediment. We demonstrated that the abundance of copA and cusA genes decreased with the increase of copper concentration and that cusA gene was up to ten times higher than the copA gene. Only the copA gene was expressed in both oxic and anoxic conditions. The abundance and activity of the microbial community remained constant whatever the concentrations of copper along the gradient. The molecular phylogeny of the two copper-resistance genes was studied and revealed that the increase of copper increased the diversity of copA and cusA gene sequences.

Copper homeostasis at the host vibrio interface: lessons from intracellular vibrio transcriptomics

Recent studies revealed that several vibrio species have evolved the capacity to survive inside host cells. However, it is still often ignored if intracellular stages are required for pathogenicity. Virulence of Vibrio tasmaniensis LGP32, a strain pathogenic for Crassostrea gigas oysters, depends on entry into hemocytes, the oyster immune cells. We investigated here the mechanisms of LGP32 intracellular survival and their consequences on the host-pathogen interaction. Entry and survival inside hemocytes were required for LGP32-driven cytolysis of hemocytes, both in vivo and in vitro. LGP32 intracellular stages showed a profound boost in metabolic activity and a major transcription of antioxidant and copper detoxification genes, as revealed by RNA sequencing. LGP32 isogenic mutants showed that resistance to oxidative stress and copper efflux are two main functions required for vibrio intracellular stages and cytotoxicity to hemocytes. Copper efflux was also essential for host colonization and virulence in vivo. Altogether, our results identify copper resistance as a major mechanism to resist killing by phagocytes, induce cytolysis of immune cells and colonize oysters. Selection of such resistance traits could arise from vibrio interactions with copper-rich environmental niches including marine invertebrates, which favour the emergence of pathogenic vibrios resistant to intraphagosomal killing across animal species.

Assessing the genetic diversity of Cu resistance in mine tailings through high-throughput recovery of full-length copA genes

Characterizing the genetic diversity of microbial copper (Cu) resistance at the community level remains challenging, mainly due to the polymorphism of the core functional gene copA. In this study, a local BLASTN method using a copA database built in this study was developed to recover full-length putative copA sequences from an assembled tailings metagenome; these sequences were then screened for potentially functioning CopA using conserved metal-binding motifs, inferred by evolutionary trace analysis of CopA sequences from known Cu resistant microorganisms. In total, 99 putative copA sequences were recovered from the tailings metagenome, out of which 70 were found with high potential to be functioning in Cu resistance. Phylogenetic analysis of selected copA sequences detected in the tailings metagenome showed that topology of the copA phylogeny is largely congruent with that of the 16S-based phylogeny of the tailings microbial community obtained in our previous study, indicating that the development of copA diversity in the tailings might be mainly through vertical descent with few lateral gene transfer events. The method established here can be used to explore copA (and potentially other metal resistance genes) diversity in any metagenome and has the potential to exhaust the full-length gene sequences for downstream analyses.

Bacterial metal resistance genes and metal bioavailability in contaminated sediments

In bacteria a metal may be defined as bioavailable if it crosses the cytoplasmic membrane to reach the cytoplasm. Once inside the cell, specific metal resistance systems may be triggered. In this research, specific metal resistance genes were used to estimate metal bioavailability in sediment microbial communities. Gene levels were measured by quantitative PCR and correlated to metals in sediments using five different protocols to estimate dissolved, particle-adsorbed and occluded metals. The best correlations were obtained with czcA (a Cd/Zn/Co efflux pump) and Cd/Zn adsorbed or occluded in particles. Only adsorbed Co was correlated to czcA levels. We concluded that the measurement of czcA gene levels by quantitative PCR is a promising tool which may complement the classical approaches used to estimate Cd/Zn/Co bioavailability in sediment compartments.

Abundance, activity, and diversity of archaeal and bacterial communities in both uncontaminated and highly copper-contaminated marine sediments

We analyzed the impact of copper mine tailing discharges on benthic Archaea and Bacteria around the city of Chanaral in northern Chile. Quantitative PCR (Q-PCR) showed that the bacteria dominated the prokaryotic community at both sites, but only the bacteria showed a decrease in abundance in the copper-contaminated site. Q-PCR on reverse transcripts indicated a higher activity of both bacterial and archaeal communities in the contaminated site, suggesting an adaptation of the two communities to copper. This hypothesis was reinforced by the concomitant augmentation of the copper-resistant copA gene coding for a P-type ATP-ase pump in the contaminated site. The metabolically active bacterial community of the contaminated site was dominated by Gammaproteobacteria related to Ectothiorhodospiraceae and Chromatiaceae and by Alphaproteobacteria phylum related to Rhodobacteraceae. The metabolically active archaeal community was dominated by one lineage belonging to unclassified Euryarchaeota and to methanogenic Archaea.