Additives, plasticizers, small microplastics (<100 μm), and other microlitter components in the gastrointestinal tract of commercial teleost fish: Method of extraction, purification, quantification, and characterization using Micro-FTIR

Effects of food quantity on the ingestion and egestion of MPs with different colors by Daphnia magna

Aquatic organism uptake and accumulate microplastics (MPs) through various pathways, with ingestion alongside food being one of the primary routes. However, the impact of food concentration on the accumulation of different types of MPs, particularly across various colors, remains largely unexplored. To address this gap, we selected Daphnia magna as a model organism to study the ingestion/egestion kinetics and the preference for different MP colors under varying concentrations of Chlorella vulgaris. Our findings revealed that as the concentration of Chlorella increased, the ingestion of MPs by D. magna initially increased and then showed a decline. During the egestion phase within clean medium without further food supply, an increase in food concentration during the ingestion phase led to a slower rate of MP discharge; while when food was present during the egestion phase, the discharge rate accelerated for all treatments, indicating the importance of food ingestion/digestion process on the MPs bioaccumulation. Furthermore, in the presence of phytoplankton, D. magna demonstrated a preference for ingesting green-colored MPs, especially at low and medium level Chlorella supply, possibly due to the enhanced food searching activities. Beyond gut passage, we also examined the attachment of MPs to the organism's body surface, finding that the number of adhered MPs increased with increasing food concentration, likely due to the intensified filtering current during food ingestion. In summary, this study demonstrated that under aquatic environment with increasing phytoplankton concentrations, the ingestion and egestion rates, color preferences, as well as surface adherence of MPs to filter feeding zooplanktons will be significantly influenced, which may further pose ecological risks. Our results offer novel insights into the unintentional accumulation of MPs by zooplankton, highlighting the complex interactions between food availability and MPs accumulation dynamics.

Comparison of plastic pollution between waters and sediments in four Po River tributaries (Northern Italy)

The monitoring of plastic contamination in freshwaters is still pioneering in comparison with marine environments, and few studies analyzed the distribution of these pollutants in both aqueous and bottom compartments of continental waters. Therefore, the aim of this study was the comparison of plastic pollution in both waters and sediments of four Po River tributaries (Ticino, Adda, Oglio and Mincio Rivers), which outflow from the main Italian sub-alpine Lakes, in order to establish the strengths and weaknesses of both matrices. The main results pointed out a heterogeneous plastic contamination, with the lowest values in Ticino (0.9 ± 0.5 plastics/m3 in waters and 6.8 ± 4.5 plastics/kg dry weight - d.w. - in sediments) and the highest in Mincio (62.9 ± 53.9 plastics/m3 in waters and 26.5 ± 13.3 plastics/kg d.w in sediments), highlighting a plastic amount in sediments four times higher than waters. Plastic pollution, mainly due to microplastics, was associated principally to a domestic input in both waters and sediments of Ticino and Adda Rivers, as well as in sediments of Oglio, while an industrial pollution was found in waters and sediments of Mincio and Oglio waters. Our data clearly highlighted as the monitoring of both matrices provide complementary information for a holistic risk assessment of these emerging contaminants in freshwaters: the aqueous matrix provides an instantaneous picture of contamination, while sediments the history of pollution.

Various additive release from microplastics and their toxicity in aquatic environments

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

A recipe for plastic: Expert insights on plastic additives in the marine environment

The production and consumption of plastic products had been steadily increasing over the years, leading to more plastic waste entering the environment. Plastic pollution is ubiquitous and comes in many types and forms. To enhance or modify their properties, chemical additives are added to plastic items during manufacturing. The presence and leakage of these additives, from managed and mismanaged plastic waste, into the environment are of growing concern. In this study, we gauged, via an online questionnaire, expert knowledge on the use, characteristics, monitoring and risks of plastic additives to the marine environment. We analysed the survey results against actual data to identify and prioritise risks and gaps. Participants also highlighted key factors for future consideration, including gaining a deeper understanding of the use and types of plastic additives, how they leach throughout the entire lifecycle, their toxicity, and the safety of alternative options. More extensive chemical regulation and an evaluation of the essentiality of their use should also be considered.

Recent Study of Separation and Identification of Micro- and Nanoplastics for Aquatic Products

Micro- and nanoplastics (MNPs) are polymeric compounds widely used in industry and daily life. Although contamination of aquatic products with MNPs exists, most current research on MNPs focuses on environmental, ecological, and toxicological studies, with less on food safety. Currently, the extent to which aquatic products are affected depends primarily on the physical and chemical properties of the consumed MNPs and the content of MNPs. This review presents new findings on the occurrence of MNPs in aquatic products in light of their properties, carrier effects, chemical effects, seasonality, spatiality, and differences in their location within organisms. The latest studies have been summarized for separation and identification of MNPs for aquatic products as well as their physical and chemical properties in aquatic products using fish, bivalves, and crustaceans as models from a food safety perspective. Also, the shortcomings of safety studies are reviewed, and guidance is provided for future research directions. Finally, gaps in current knowledge on MNPs are also emphasized.

Detection of anthropogenic fibres in marine organisms: Knowledge gaps and methodological issues

Most studies examining the occurrence of plastics and microplastics in marine organisms have identified anthropogenic fibres, of natural and synthetic origin, as the most commonly occurring category. Anthropogenic fibres may have been chemically treated with additives making them more persistent and a potential threat to marine organisms. However, fibres have often been excluded from analytical data for the difficulties related to the sampling and analytical procedures, including potential overestimation of the results due to airborne contamination. This review aimed to collect and analyse all studies focusing on the interaction between anthropogenic fibres and marine organisms worldwide, highlighting critical issues that need to be overcome for the analysis fibres on marine organisms. Furthermore, emphasis was placed on the species studied in the Mediterranean Sea, which is particularly affected by this type of pollution. Overall, this review shows that fibre pollution is an underestimated threat to marine organisms and that a specific, harmonised protocol for the analysis of different anthropogenic fibres needs to be developed.

Microplastics in water, feed and tissues of European seabass reared in a recirculation aquaculture system (RAS)

Plastic particles (PLs) are ubiquitous in aquatic ecosystems and aquaculture production is susceptible to contamination from external or endogenous sources. This study investigated PL presence in water, fish feed and body sites of 55 European seabass produced in a recirculating aquaculture system (RAS). Fish morphometric parameters and health status biomarkers were determined. A total of 372 PLs were recovered from water (37.2 PL/L), 118 PLs from feed (3.9 PL/g), and 422 from seabass (0.7 PL/g fish; all body sites analysed). All 55 specimens had PLs in at least two of the four body sites analysed. Concentrations were higher in the gastrointestinal tract (GIT; 1.0 PL/g) and gills (0.8 PL/g) than in the liver (0.8 PL/g) and muscle (0.4 PL/g). PL concentration in GIT was significantly higher than in muscle. Black, blue, and transparent fibres made of man-made cellulose/rayon and polyethylene terephthalate were the most common PLs in water and seabass, while black fragments of phenoxy resin were the most common in feed. The levels of polymers linked to RAS components (polyethylene, polypropylene, and polyvinyl chloride) were low suggesting a limited contribution to the overall PL levels found in water and/or fish. The mean PL size recovered from GIT (930 μm) and gills (1047 μm) was significantly larger than those found in the liver (647 μm) and dorsal muscle (425 μm). Considering all body sites, PLs bioconcentrated in seabass (BCF_Fish >1) but their bioaccumulation did not occur (BAF_Fish <1). No significant differences were observed in oxidative stress biomarkers between fish with low (<7) and high (≥7) PL numbers. These findings suggest that fish produced in RAS are mainly exposed to MPs through water and feed. Further monitoring under commercial conditions and risk assessment are warranted to identify potential threats to fish and human health and define mitigating measures.

Modification of fluorescence staining method for small-sized microplastic quantification: Focus on the interference exclusion and exposure time optimization

Microplastics are an emerging pollutant of global concern, and fluorescence staining as an efficient method for small-sized microplastic qualification often undergoes the serious interference from external environments. The key steps affecting the accuracy of fluorescent staining and the corresponding quality assurance measures were rarely known. Therefore, this study took the Nile Red/DAPI co-staining method as an example to explore the key factors affecting its accuracy and effective measures to avoid interference. High background microplastic contamination in typical lab waters (up to 1115 MP/L), glass fiber filter membrane and glassware were identified as dominant factors affecting microplastic quantification. The background microplastics in lab waters mainly originated from the process of water production and storage. A simple filtration process removed 99% of the background microplastic in the lab waters. After burning at 500 °C for 1 h, the microplastic contamination in the filter membrane and glassware was completely eliminated. H₂O₂ pretreatment and exposure time caused erroneous microplastic size assessment, and were suggested to be set at 48 h and 10 ms, respectively. During the extraction process, the residue in beakers reached ~ 20% and > 50% for 5 μm and 20 μm sized microplastics, respectively, greatly contributing to the microplastic loss. The comprehensive modified measures caused microplastic concentrations in the three typical samples detected by Nile Red/DAPI co-staining method to decrease by 65.7 - 92.2% and to approach the micro-Raman results. This study clarified the reasons for interfering with quantitative microplastics by fluorescent staining and the effective measures to avoid interference, which were conducive to improving the accuracy of quantitative methods of microplastics.

No accumulation of microplastics detected in western Canadian ringed seals (Pusa hispida)

Ringed seals (Pusa hispida) play a crucial role in Arctic food webs as important pelagic predators and represent an essential component of Inuvialuit culture and food security. Plastic pollution is recognized as a global threat of concern, and Arctic regions may act as sinks for anthropogenic debris. To date, mixed evidence exists concerning the propensity for Canadian Arctic marine mammals to ingest and retain plastic. Our study builds on existing literature by offering the first assessment of plastic ingestion in ringed seals harvested in the western Canadian Arctic. We detected no evidence of microplastic (particles ≥80 μm) retention in the stomachs of ten ringed seals from the Inuvialuit Settlement Region (ISR) in the Northwest Territories, Canada. These results are consistent with previous studies that have found that some marine mammals do not accumulate microplastics in evaluated regions.

Foraging strategy influences the quantity of ingested micro- and nanoplastics in shorebirds

Coastlines, including estuaries, mudflats, and beaches, are particularly susceptible to plastic pollution, which can accumulate from both marine and terrestrial sources. While numerous studies have confirmed the presence of microplastics (1-5 mm) along coastlines, few have focused on very small particles (<1 μm) or quantified exposure within the organisms that inhabit these areas, such as shorebirds. Here, we quantified small plastics (200 nm-70 μm) in two resident shorebird species in Tasmania, and compared this to quantities found in the surrounding sediments in order to investigate the potential exposure and transfer of particles within these ecosystems. Analysis was performed using a combination of flow cytometry for quantification of micro- and nanoplastics (200 nm-70 μm), and μm-FT-IR for validation and polymer identification of particles >5.5 × 5.5 μm. Micro- and nano-plastics were detected in 100% of guano samples from surface-feeding Eastern Hooded Plovers (Thinornis cucullatus) and 90% of Australian Pied Oystercatcher (Haematopus longirostris) guano, a species that forages for coastal invertebrates at 60-90 mm depth, and 100% of beach sediments. Hooded Plover guano contained 32 × more plastics, on average, than Pied Oystercatcher guano. Interestingly, the abundance of plastic particles within sediments collected from shorebird foraging sites did not appear to have a significant effect on the number of plastics the birds had ingested, suggesting the difference between species is likely a result of other variables, such as prey selection. The results of this study highlight the importance of including techniques that provide quantitative data on the abundance and size of the smallest possible particle sizes, and demonstrate the significant proportion of small plastics that are 'missed' using standard analysis tools.

Quantification and identification of airborne small microplastics (<100 μm) and other microlitter components in atmospheric aerosol via a novel elutriation and oleo-extraction method

The atmosphere is a significant pathway for distributing plastic particles and other micro-litter particles from their sources to other environmental compartments. There is a big gap regarding the standardized method for the quantification and identification of airborne microplastics (MPs), especially those in the range of 5-100 μm (small microplastics, SMPs) and airborne micro-litter components (MLCs), i.e., plastic additives, natural fibers and non-plastics synthetic fibers. This study aimed to develop and optimize a pre-treatment method (i.e., elutriation, oleoextraction, and purification) to extract SMPs and MLCs simultaneously from urban aerosol samples. The quantification and simultaneous chemical characterization were performed via Micro-FTIR. The method developed was then applied to two samples from different seasons, i.e., summer and late fall - winter. Micro-litter particles followed the Poisson distribution, and the fiducial limit (confidence interval) was calculated accordingly. Non-parametric statistical tests were performed to evaluate significant differences among the samples. The most abundant plastic polymers were polyethylene (HDPE) and polytetrafluoroethylene (PTFE). Among MLCs, flame retardants, UV filters, stabilizers, and rayon were identified. The results of this study will contribute significantly to establishing standardized and accredited methods to quantify and identify airborne SMPs and MLCs.

Are microplastics contributing to pollution-induced neurotoxicity? A pilot study with wild fish in a real scenario

Pollution-induced neurotoxicity is of high concern. This pilot study investigated the potential relationship between the presence of microplastics (MPs) in the brain of 180 wild fish (Dicentrarchus labrax, Platichthys flesus, Mugil cephalus) from a contaminated estuary and the activity of the acetylcholinesterase (AChE) enzyme. MPs were found in 9 samples (5% of the total), all of them from D. labrax collected in the summer, which represents 45% of the samples of this species collected in that season (20). Seventeen MPs were recovered from brain samples, with sizes ranging from 8 to 96 μm. Polyacrylamide, polyacrylic acid and one biopolymer (zein) were identified by Micro-Raman spectroscopy. Fish with MPs showed lower (p ≤ 0.05) AChE activity than those where MPs were not found. These findings point to the contribution of MPs to the neurotoxicity induced by long-term exposure to pollution, stressing the need of further studies on the topic to increase 'One Health' protection.

Assessment of Micro- and Nanoplastic Composition (Polymers and Additives) in the Gastrointestinal Tracts of Ebro River Fishes

One of the main routes of fish exposure to micro- and nanoplastics (MNPLs) is their ingestion. MNPLs can act as reservoirs of organic contaminants that are adsorbed onto their surfaces, or that can leach from their complex formulations, with potential impacts on biota and along the aquatic food chain. While MNPLs have been reported in fishes worldwide, complete information on MNPL compositions, polymers and additives continues to be scarce. In this work, the presence of MNPLs in the gastrointestinal tracts (GIT) of fish from the Ebro River (Spain) was investigated using a double suspected screening approach to assess and quantify polymers and additives. The sample-preparation procedure consisted of sequential alkaline and acidic digestions with KOH and HNO₃, followed by ultrasonic-assisted extraction (USAE) with toluene. The analysis of polymers was carried out with size-exclusion chromatography followed by high-resolution mass spectrometry using an atmospheric pressure photoionization source, operating in negative and positive ionisation modes (SEC-(±)-APPI-HRMS) using full-scan acquisition (FS). Plastic additives were assessed using high-performance liquid chromatography with a C18 analytical column coupled to HRMS equipped with an electrospray ionisation source operating under positive and negative conditions (LC-(±ESI)-HRMS). The acquisition was performed in parallel with full-scan (FS) and data-dependent scan (ddMS²) modes, working under positive and negative ionisation modes. The polymers most frequently detected and quantified in fish GITs were polysiloxanes, polyethylene (PE), polypropylene (PP) and polystyrene (PS). PE was detected in 84% of the samples, with a concentration range from 0.55 to 3545 µg/g. On the other hand, plasticisers such as phthalates and stabilisers such as benzotriazoles were the most frequently identified plastic additives.

Analysis of Microplastics in Aquatic Shellfish by Pyrolysis-Gas Chromatography/Mass Spectrometry after Alkali Digestion and Solvent Extraction

Microplastics are harmful to both marine life and humans. Herein, a pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) technique for the detection of microplastics in aquatic shellfish is demonstrated. The organic matter in aquatic shellfish was removed by alkali digestion. Subsequently, using hexafluoroisopropanol as the extraction solvent, the extraction method was optimized. The influence of the digestion process on the nature of microplastics was investigated by analyzing the samples before and after the alkali treatment via infrared spectrometry, laser particle sizing, and scanning electron microscopy. Spiked recovery experiments and an analysis of actual samples were performed using PA6 and PA66 as analytes. A quantitative analysis of the characteristic ion fragment produced by high-temperature cracking was performed after chromatographic separation and mass spectrometry identification. The linear range of this method for PA6 and PA66 was 2-64 μg. The limits of detection of PA6 and PA66 were 0.2 and 0.6 μg, while the limits of quantitation were 0.6 and 2.0 μg, respectively. Recovery ranged from 74.4 to 101.62%, with a precision of 4.53-7.56%. The results suggest that the Py-GC/MS technique is suitable for the analysis and detection of trace microplastics in aquatic shellfish.

Microplastics Determination in Gastrointestinal Tracts of European Sea Bass (Dicentrarchus labrax) and Gilt-Head Sea Bream (Sparus aurata) from Tenerife (Canary Islands, Spain)

Microplastic pollution has an extremely widespread distribution, to the extent that microplastics could be ingested by aquatic organisms, including species of commercial importance for fisheries and aquaculture. In this work, the anthropogenic particles content of the gastrointestinal tracts of 86 individuals of cultivated European sea bass (Dicentrarchus labrax, n = 45) and gilt-head sea bream (Sparus aurata, n = 41) from Tenerife (Canary Islands, Spain) was determined. Samples were bought at local markets and directly transported to the laboratory. After the dissection of the fishes and digestion of the gastrointestinal tracts in 10% KOH (w/v) at 60 °C for 24 h, the digests were filtered (50 µm stainless-steel mesh) and visualized under a stereomicroscope, finding that most of the items were colourless (47.7% for Dicentrarchus labrax and 60.9% for Sparus aurata) and blue (35.3% vs. 24.8%) microfibers, with an average length of 1957 ± 1699 µm and 1988 ± 1853 µm, respectively. Moreover, 15.3% of the microfibres were analysed by Fourier transform infrared spectroscopy, showing the prevalence of cellulosic fibres together with polyester, polyacrylonitrile, and poly(ether-urethane). This pattern (microplastics shapes, colours, sizes, and composition) clearly agrees with previous studies carried out in the Canary Islands region regarding the determination of microplastics in the marine environment.