Enhanced water permeation through sodium alginate membranes by incorporating graphene oxides

Enhancing fruit preservation with sodium alginate films incorporating propolis extract and graphene oxide

In this work, sodium alginate (SA) composite films containing propolis extract (PRO) and graphene oxide (GO) were developed. Subsequently, the effects of PRO and GO on different properties of SA composite films were studied, and the films were characterized by scanning electron microscopy, fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. The PRO release properties and fruit preservation performance of the developed composite films were also investigated. The results showed that the incorporation of PRO resulted in a 51.16% increase in tensile strength. The simultaneous incorporation of PRO and GO reduced water vapor permeability (WVP) by 22.56% compared to the SA film. The temperatures at which the SA/GO/PRO film lost 5% of its weight were 8.0°C higher than those of the SA film. The incorporation of GO into the SA/PRO composite film also modulates the release of PRO. Furthermore, the incorporation of PRO and GO improved the tensile strength of the SA film, as reflected in the microstructure of the films. The reduced WVP of the SA composite film allowed the packaged blueberries to exhibit less weight loss and shrinkage, thereby prolonging their shelf life.

Graphene Oxide and its Composites: Advanced Membranes for Selective Water Permeation

Graphene oxide (GO) membranes have gained significant attention as a promising material for separation by selective permeation processes due to their advantageous structural and chemical properties, including high water permeability, chemical resistance, and mechanical strength. In this study, we explore the potential applications of GO membranes in pervaporation to separate liquid mixtures. The layered structure and hydrophilic nature of GO membrane facilitate rapid and selective water transport through angstrom-scale interlayer spacings, resulting in superior performance over conventional polymeric and inorganic membranes. The unique mass transport mechanisms - slip flow and molecular alignment - enable GO membranes to selectively permeate water over organic solvents. For chemical dehydration, GO membranes are the most potential candidates. Furthermore, advancements in composite GO membranes and cross-linking techniques that improve their stability and separation performance are discussed. This study highlights the advantages of GO membranes and their potential to replace or complement existing technologies, by emphasizing their role in advancing membrane-based separation and promoting environmental sustainability. Future research is expected to optimize the fabrication techniques for GO membranes and expand their application scope.

Electric-field-induced structure and dynamics of an ethanol-water mixture in hydrophobic-hydrophilic nanochannels

Understanding the behavior of confined fluid mixtures under external electric fields is essential for advancing scientific knowledge and improving a wide range of technological applications, from energy systems to biological processes. An electric field has been widely used to investigate the phase transition of water and modification of interfacial water at the nanoscale. However, the structure and dynamics of the interfacial layer in complex confined fluid mixtures, such as ethanol-water mixtures, remain unexplored under the influence of an electric field. In this study, we explore the structural and dynamic behavior of binary ethanol-water mixtures confined within slit-like hydrophilic (mica) and hydrophobic (graphene) nanochannels under an external electric field using classical molecular dynamics (MD) simulations. We find two distinct interfacial water layers near the hydrophilic mica surface, and a more pronounced sharp peak appears near the hydrophobic graphene sheet with increasing electric field. The density maxima of the -OH and -CH3 groups of ethanol shift towards and away from the graphene surface with an increasing electric field. Our simulations reveal that the electric field strongly impacts the inter and intralayer hydrogen bonding among water and ethanol molecules. The diffusion coefficient of water slightly increases with the electric field and then reduces with an electric field for a lower concentration of ethanol. This finding reveals that the electric field influences the desorption of interfacial water near the hydrophilic mica surface, which can be an implication for diverse technological applications like modifying surface wettability.

Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration

Pervaporation is considered the most promising technology for dehydration of bioalcohols, attracting increasing attention as a renewable energy source. In this regard, the development of stable and effective membranes is required. In this study, highly efficient membranes for the enhanced pervaporation dehydration of ethanol were developed by modification of sodium alginate (SA) with a polyethylenimine (PEI) forming polyelectrolyte complex (PEC) and graphene oxide (GO). The effect of modifications with GO or/and PEI on the structure, physicochemical, and transport characteristics of dense membranes was studied. The formation of a PEC by ionic cross-linking and its interaction with GO led to changes in membrane structure, confirmed by spectroscopic and microscopic methods. The physicochemical properties of membranes were investigated by a thermogravimetric analysis, a differential scanning calorimetry, and measurements of contact angles. The theoretical consideration using computational methods showed favorable hydrogen bonding interactions between GO, PEI, and water, which caused improved membrane performance. To increase permeability, supported membranes without treatment and cross-linked were developed by the deposition of a thin dense layer from the optimal PEC/GO (2.5%) composite onto a developed porous substrate from polyacrylonitrile. The cross-linked supported membrane demonstrated more than two times increased permeation flux, higher selectivity (above 99.7 wt.% water in the permeate) and stability for separating diluted mixtures compared to the dense pristine SA membrane.

Enhancing Efficiency and Stability in Carbon-Based Perovskite Solar Cells by Double Passivation with Ultralow-Cost Coal-Derived Graphene and Its Derivatives

Coal-derived carbon nanomaterials possess numerous superior features compared to other classic carbon, such as readily accessible surfaces, tunable pore structure, and facile and precise surface functionalization. Therefore, the controllable preparation of coal-derived carbon nanomaterials is anticipated to be of great significance for the performance improvement and commercialization process of carbon-based perovskite solar cells (C-PSCs). In this study, we successfully synthesized highly stable and commercially valuable graphene oxide (GO) and reduced graphene oxide (rGO) utilizing coal. Compared to traditional methods and commercial graphene, the chemical oxidation and pyrolysis process used in this study is mild and simple, offering the advantages of controlled composition and the absence of other impurities. GO or rGO was incorporated into the top of the SnO2 electron transport layer (ETL) of C-PSCs. Under optimized conditions and ultraviolet-ozone (UVO) irradiation, the ultimate power conversion efficiency (PCE) increased from the unmodified 12.4 to 14.04% (based on rGO) and 15.18% (based on GO), representing improvements of 22 and 31%, respectively. The improved photovoltaic performance is mainly owing to enhanced charge transport capabilities, denser interfacial contacts, improved carrier separation properties, increased conductivity, and abundance of hydrophilic functional groups in GO, which can form more stable hydrogen bonds with SnO2. After being stored at room temperature and ambient humidity for 30 days, the modified, unpacked devices retained 87% of the highest power conversion efficiency (PCE). This study introduces a practical and manageable method to enhance the performance of C-PSCs by using functional carbon nanomaterials derived from coal.

Adsorptive Membranes Incorporating Ionic Liquids (ILs), Deep Eutectic Solvents (DESs) or Graphene Oxide (GO) for Metal Salts Extraction from Aqueous Feed

Water scarcity is a significant concern, particularly in arid regions, due to the rapid growth in population, industrialization, and climate change. Seawater desalination has emerged as a conventional and reliable solution for obtaining potable water. However, conventional membrane-based seawater desalination has drawbacks, such as high energy consumption resulting from a high-pressure requirement, as well as operational challenges like membrane fouling and high costs. To overcome these limitations, it is crucial to enhance the performance of membranes by increasing their efficiency, selectivity, and reducing energy consumption and footprint. Adsorptive membranes, which integrate adsorption and membrane technologies, offer a promising approach to address the drawbacks of standalone membranes. By incorporating specific materials into the membrane matrix, composite membranes have demonstrated improved permeability, selectivity, and reduced pressure requirements, all while maintaining effective pollutant rejection. Researchers have explored different adsorbents, including emerging materials such as ionic liquids (ILs), deep eutectic solvents (DESs), and graphene oxide (GO), for embedding into membranes and utilizing them in various applications. This paper aims to discuss the existing challenges in the desalination process and focus on how these materials can help overcome these challenges. It will also provide a comprehensive review of studies that have reported the successful incorporation of ILs, DESs, and GO into membranes to fabricate adsorptive membranes for desalination. Additionally, the paper will highlight both the current and anticipated challenges in this field, as well as present prospects, and provide recommendations for further advancements.

Green and Sustainable Membranes: A review

Membranes are ubiquitous tools for modern water treatment technology that critically eliminate hazardous materials such as organic, inorganic, heavy metals, and biomedical pollutants. Nowadays, nano-membranes are of particular interest for myriad applications such as water treatment, desalination, ion exchange, ion concentration control, and several kinds of biomedical applications. However, this state-of-the-art technology suffers from some drawbacks, e.g., toxicity and fouling of contaminants, which makes the synthesis of green and sustainable membranes indeed safety-threatening. Typically, sustainability, non-toxicity, performance optimization, and commercialization are concerns centered on manufacturing green synthesized membranes. Thus, critical issues related to toxicity, biosafety, and mechanistic aspects of green-synthesized nano-membranes have to be systematically and comprehensively reviewed and discussed. Herein we evaluate various aspects of green nano-membranes in terms of their synthesis, characterization, recycling, and commercialization aspects. Nanomaterials intended for nano-membrane development are classified in view of their chemistry/synthesis, advantages, and limitations. Indeed, attaining prominent adsorption capacity and selectivity in green-synthesized nano-membranes requires multi-objective optimization of a number of materials and manufacturing parameters. In addition, the efficacy and removal performance of green nano-membranes are analyzed theoretically and experimentally to provide researchers and manufacturers with a comprehensive image of green nano-membrane efficiency under real environmental conditions.

Graphene Oxide-Grafted Hybrid Diblock Copolymer Brush (GO-graft-PEG6k-block-P(MA-POSS)) as Nanofillers for Enhanced Lithium Ion Conductivity of PEO-Based Nanocomposite Solid Polymer Electrolytes

Nanocomposite solid polymer electrolytes (NSPEs) with PEO as the matrix and (i) GO or (ii) GO-graft-PEG_6k or (iii) GO-graft-PEG_6k-block-P(MA-POSS) as nanofillers have been fabricated to elucidate the impact of the filler morphology on the lithium ion conductivity. GO-graft-PEG_6k was obtained by grafting PEG_6k onto GO via esterification. GO-graft-PEG_6k-block-P(MA-POSS) was prepared via surface-initiated atom transfer radical polymerization. Fourier-transform infrared spectroscopy revealed enhanced salt dissociation and complexation between the filler and PEO host that could be attributed to Lewis acid-base interactions. Electrochemical impedance spectroscopy revealed the improved ion conductivity of the fabricated NSPEs as compared with the pristine PEO-LiClO₄. As an example, at 50 °C, the ion conductivity increased to 4.01 × 10^-5 and 6.31 × 10^-5 S cm^-1 with 0.3% GO and 0.3% GO-graft-PEG_6k, respectively, from 2.36 × 10^-5 S cm^-1 of PEO-LiClO₄, suggesting that the filler with brush-like architecture (GO-graft-PEG_6k) is more efficient in enhancing the ion conductivity. Further increase in filler content resulted in lowering of the ion conductivity that could be ascribed to aggregation of the filler. The most dramatic impact on conductivity was observed with the incorporation of brush-like GO-graft-PEG_6k-block-P(MA-POSS) as a nanofiller (3.0 × 10^-4 S cm^-1 at 50 °C with 1.0 wt % filler content). The increase in ion conductivity in the current systems, as opposed to the conventional view, could not be correlated with the content of the amorphous phase of the matrix. The conduction mechanism is still unclear; nevertheless, it could be assumed that in addition to the ion conduction through the PEO matrix, the filler forms additional low-energy ion conducting channels at its interface with the matrix. The pendent POSS nanocages of GO-graft-PEG_6k-block-P(MAPOSS) might probably increase the free volume at the interface with the matrix that is associated with higher chain and ion mobility, thus further enhancing the ion conductivity as compared with GO and GO-graft-PEG_6k. The faster ion dynamics in 1.0 wt % GO-graft-PEG_6k-block-P(MAPOSS) NSPEs has also been verified by the dielectric relaxation studies. Thus, integration of both the PEG and POSS nanocages into GO-grafted brush-like architecture offers a new tool for tuning the lithium ion conductivity for potential Li ion battery applications.

Sensor to Electronics Applications of Graphene Oxide through AZO Grafting

Graphene is a two-dimensional (2D) material with a single atomic crystal structure of carbon that has the potential to create next-generation devices for photonic, optoelectronic, thermoelectric, sensing, wearable electronics, etc., owing to its excellent electron mobility, large surface-to-volume ratio, adjustable optics, and high mechanical strength. In contrast, owing to their light-induced conformations, fast response, photochemical stability, and surface-relief structures, azobenzene (AZO) polymers have been used as temperature sensors and photo-switchable molecules and are recognized as excellent candidates for a new generation of light-controllable molecular electronics. They can withstand trans-cis isomerization by conducting light irradiation or heating but have poor photon lifetime and energy density and are prone to agglomeration even at mild doping levels, reducing their optical sensitivity. Graphene derivatives, including graphene oxide (GO) and reduced graphene oxide (RGO), are an excellent platform that, combined with AZO-based polymers, could generate a new type of hybrid structure with interesting properties of ordered molecules. AZO derivatives may modify the energy density, optical responsiveness, and photon storage capacity, potentially preventing aggregation and strengthening the AZO complexes. They are potential candidates for sensors, photocatalysts, photodetectors, photocurrent switching, and other optical applications. This review aimed to provide an overview of the recent progress in graphene-related 2D materials (Gr2MS) and AZO polymer AZO-GO/RGO hybrid structures and their synthesis and applications. The review concludes with remarks based on the findings of this study.

Pervaporation as a Successful Tool in the Treatment of Industrial Liquid Mixtures

Pervaporation is one of the most active topics in membrane research, and it has time and again proven to be an essential component for chemical separation. It has been employed in the removal of impurities from raw materials, separation of products and by-products after reaction, and separation of pollutants from water. Given the global problem of water pollution, this approach is efficient in removing hazardous substances from water bodies. Conventional processes are based on thermodynamic equilibria involving a phase transition such as distillation and liquid-liquid extraction. These techniques have a relatively low efficacy and nowadays they are not recommended because it is not sustainable in terms of energy consumption and/or waste generation. Pervaporation emerged in the 1980s and is now becoming a popular membrane separation technology because of its intrinsic features such as low energy requirements, cheap separation costs, and good quality product output. The focus of this review is on current developments in pervaporation, mass transport in membranes, material selection, fabrication and characterization techniques, and applications of various membranes in the separation of chemicals from water.

Fabrication and prospective applications of graphene oxide-modified nanocomposites for wastewater remediation

Water bodies have become polluted with heavy metals and hazardous contaminants as a result of fast development. Many strategies have been devised by researchers in order to remove hazardous contaminants from the aquatic environment. Utilizing graphene oxide-based composite materials as efficient adsorbents for waste water treatment, desalination, separation, and purification is gaining attraction nowadays. Some of their defining properties are high mechanical strength, hydrophilicity, remarkable flexibility, ease of synthesis, atomic thickness, and compatibility with other materials. In water treatment, high separation performance and stable graphene-based laminar structures have been the main goals. Magnetic separation is among the methods which received a lot of attention from researchers since it has been shown to be quite effective at removing harmful pollutants from aqueous solution. Graphene oxide-modified nanocomposites have provided optimal performance in water purification. This review article focusses on the fabrication of GO, rGO and MGO nanocomposites as well as the primary characterization tools needed to assess the physiochemical and structural properties of graphene-based nanocomposites. It also discusses the approaches for exploiting graphene oxide (GO), reduced graphene (rGO), and magnetic graphene oxide (MGO) to eliminate contaminants for long-term purification of water. The potential research hurdles for using fabricated MGOs as an adsorbent to remediate water contaminants like hazardous metals, radioactive metal ions, pigments, dyes, and agricultural pollutants are also highlighted.

Emerging graphitic carbon nitride-based membranes for water purification

Membrane separation is a promising technology that can effectively remove various existing contaminants from water with low energy consumption and small carbon footprint. The critical issue of membrane technology development is to obtain a low-cost, stable, tunable and multifunctional material for membrane fabrication. Graphitic carbon nitride (g-C₃N₄) has emerged as a promising membrane material, owing to the unique structure characteristics and outstanding catalytic activity. This review paper outlined the advanced material strategies used to regulate the molecule structure of g-C₃N₄ for membrane separation. The presentative progresses on the applications of g-C₃N₄-based membranes for water purification have been elaborated. Essentially, we highlighted the innovation integration of physical separation, catalysis and energy conversion during water purification, which was of great importance for the sustainability of water treatment techniques. Finally, the continuing challenges of g-C₃N₄-based membranes and the possible breakthrough directions in the future research was prospected.

Hydrophilic and organophilic pervaporation of industrially important α,β and α,ω-diols

The distillation-based purification of α,β and α,ω-diols is energy and resource intensive, as well as time consuming. Pervaporation separation is considered to be a remarkable energy efficient membrane technology for purification of diols. Thus, as a core pervaporation process, hydrophilic polyvinyl alcohol (PVA) membranes for the removal of water from 1,2-hexanediol (1,2-HDO) and organophilic polydimethylsiloxane-polysulfone (PDMS-PSF) membranes for the removal of isopropanol from 1,5 pentanediol (1,5-PDO) were employed. For 1,2-HDO/water separation using a feed having a 1 : 4 weight ratio of 1,2-HDO/water, the membrane prepared using 4 vol% glutaraldehyde (GA4) showed the best performance, yielding a flux of 0.59 kg m-2 h-1 and a separation factor of 175 at 40 °C. In the organophilic pervaporation separation of the 1,5-PDO/IPA feed having a 9 : 1 weight ratio of components, the PDMS membrane prepared with a molar ratio of TEOS alkoxy groups to PDMS hydroxyl groups of 70 yielded a flux of 0.12 kg m-2 h-1 and separation factor of 17 638 at 40 °C. Long term stability analysis found that both hydrophilic (PVA) and organophilic (PDMS) membranes retained excellent pervaporation output over 18 days' continuous exposure to the feed. Both the hydrophilic and organophilic membranes exhibited promising separation performance at elevated operating conditions, showing their great potential for purification of α,β and α,ω-diols.

Green preparation of polyvinylidene fluoride loose nanofiltration hollow fiber membranes with multilayer structure for treating textile wastewater

In this work, polyvinylidene fluoride (PVDF) loose nanofiltration (NF) hollow fiber membranes with multilayer structure were prepared successfully based on a solvent-free process. Graphene oxide (GO) was used to cover the interface pores of the pristine PVDF membranes via vacuum filtration, and polypyrrole (PPy) was polymerized on the surface to further decorate the membrane structure. Interestingly, the modified membranes exhibited a multilayer structure due to synergistic effect of GO and PPy. The structure and property of PVDF loose NF membranes were investigated in detail. After modifying by GO and PPy, the hydrophilicity improved obviously. Moreover, the molecular weight cut off (MWCO) was about 3580 Da, and the smallest pore size of skin layer decreased to 2.5-4 nm. Furthermore, the PVDF loose NF hollow fiber membranes presented a high dye rejection (˃98.5%) for negative dyes, whereas a low salt rejection for NaCl (about 4%), showing a great potential for separating dye/salt accurately. Specifically, there were not any solvent used in all the preparation processes. The work offered a novel strategy for green preparation of loose NF membranes.

2D Material Based Advanced Membranes for Separations in Organic Solvents

2D materials have shown high potentials for fabricating next-generation membranes. To date, extensive studies have focused on the applications of 2D material membranes in gas and aqueous media. Recently, compelling opportunities emerge for 2D material membranes in separation applications in organic solvents because of their unique properties, such as ultrathin mono- to few-layers, outstanding chemical resistance toward organic solvents. Hence, this review aims to provide a timely overview of the current state-of-the-art of 2D material membranes focusing on their applications in organic solvent separations. 2D material membranes fabricated using graphene materials and a few representative nongraphene-based 2D materials, including covalent organic frameworks and MXenes, are summarized. The key membrane design strategies and their effects on separation performances in organic solvents are also examined. Last, several perspectives are provided in terms of the critical challenges for 2D material membranes, including standardization of membrane performance evaluation, improving understandings of separation mechanisms, managing the trade-off of permeability and selectivity, issues related to application versatility, long-term stability, and fabrication scalability. This review will provide a useful guide for researchers in creating novel 2D material membranes for advancing new separation techniques in organic solvents.

Dimensional Nanofillers in Mixed Matrix Membranes for Pervaporation Separations: A Review

Pervaporation (PV) has been an intriguing membrane technology for separating liquid mixtures since its commercialization in the 1980s. The design of highly permselective materials used in this respect has made significant improvements in separation properties, such as selectivity, permeability, and long-term stability. Mixed-matrix membranes (MMMs), featuring inorganic fillers dispersed in a polymer matrix to form an organic-inorganic hybrid, have opened up a new avenue to facilely obtain high-performance PV membranes. The combination of inorganic fillers in a polymer matrix endows high flexibility in designing the required separation properties of the membranes, in which various fillers provide specific functions correlated to the separation process. This review discusses recent advances in the use of nanofillers in PV MMMs categorized by dimensions including zero-, one-, two- and three-dimensional nanomaterials. Furthermore, the impact of the nanofillers on the polymer matrix is described to provide in-depth understanding of the structure-performance relationship. Finally, the applications of nanofillers in MMMs for PV separation are summarized.

A highly hydrophilic benzenesulfonic-grafted graphene oxide-based hybrid membrane for ethanol dehydration

A new type of hybrid membrane was prepared by blending sodium alginate (SA) with benzenesulfonic-grafted graphene oxide (BS@GO), which showed higher hydrophilicity and more defects or edges than GO to create channels for the transfer of water molecules. BS@GO was synthesized by reacting aryl diazonium salts with graphene oxide (GO). The BS@GO sheets were aligned parallelly to the membrane surface and affected the interactions between the SA chains. BS@GO could improve the hydrophilicity and pervaporation properties of SA-based hybrid membranes. Also, compared to GO fillers, BS@GO fillers could supply higher water permeance to improve the pervaporation flux and separation factor. For the pervaporation of 90 wt% aqueous ethanol at 343 K, the optimum hybrid membrane with 1.5 wt% BS@GO in the SA matrix showed the maximum permeate flux of 703 ± 89 g m^-2 h^-1 (1.4 times higher than that of an SA membrane), and the highest separation factor was 5480 ± 94 (5.6 times higher than that of the SA membrane). Moreover, the hybrid membrane exhibited good stability and separation ability during long-term testing.