Environmental impact of greenness assessment tools in liquid chromatography – A review

Critical analysis of analytical techniques developed for statins in biological fluids, environmental and fermentation samples

Statins are the most prescribed drug for regulating the high cholesterol level in the blood, which can lead to severe complications, such as cardiovascular diseases and other health complications. A wide range of analytical techniques have been employed for the quantification of statins from various origins, including fermentation derived (lovastatin, pravastatin, and compactin), semi-synthetic (simvastatin), and synthetic (atorvastatin, rosuvastatin, and fluvastatin) routes. The presence of more than one structural form and structural analogue generated in the biosynthesis pathway, as well as reaction intermediates and macromolecules in the clinical sample, complicates the quantification of statins. Furthermore, significant concentrations of statins in environmental samples pose serious health and ecology hazards, and estimating statins in those diluted samples is extremely difficult. On the other hand, the: cost, accurate estimation of the desired one from other structural forms, sample complexity, time, limits of detection and quantification, were major criteria distinguishing the usability of each technique. As a result, the current manuscript focuses on analytical techniques such as molecular spectroscopy (normal and derivatives UV-Visible spectrophotometer), chromatography (TLC, HP-TLC, HPLC, GC, swing column, micellar, and supercritical fluid), mass spectroscopy (HPLC-MS/MS and GC-MS/MS), sequential flow injection, capillary electrophoresis, and cyclic voltammetry, as well as their: optimal operating conditions, limits of detection and quantification, advancements, and limitations. Furthermore, various online and offline sample preparations (precipitation, solid phase extraction, liquid-liquid extraction, and micellar extraction) have been highlighted as an essential pretreatment technique to avoid the interference caused by structural analogues and other macromolecules. The greener and more sustainable concepts used in analytical approaches for the quantification statins are also highlighted with current advancements.

A stability-illustrating HPLC-DAD method for assessment of two veterinary anti-parasitic drugs: appraisal of the method's greenness and blueness

This paper represents an effective and reliable high-performance liquid chromatography-diode array detector (HPLC-DAD) method for the regular assay of Clorsulon (CLR) and Moxidectin (MOX) anti-parasitic drugs in injection solution and pure powder without derivatization processes. The mobile phase was composed of acetonitrile: methanol: water: acetic acid (56.0: 36.0: 7.5: 0.5 by volume). Besides, a Supelcosil C18 (4.60 mm ×15.0 cm, 5.0 μm) column was selected for completing the separation and quantitation of the two aforementioned veterinary drugs at a wavelength of 254 nm. The flow rate was set at 2.0 mL min-1 at the isocratic approach. We have conducted the degradation experiments using the HPLC-DAD instrument, adhering to the guidelines of the International Conference of Harmonization (ICH), subjecting CLR and MOX to light, heat, basic, acidic, and oxidative stressful conditions to figure out the ideal storage conditions and the possible medications that can be co-administered with them. CLR and MOX were quantified linearly from 400.0 to 1200.0 and from 40.0 to 120.0 µg mL-1, respectively. The maximum recorded degradation results were in acidic, basic, and oxidative conditions. Therefore, strong basic or acidic medications and oxidants shouldn't be combined with CLR and MOX in a co-formulated medication. Greenness, carbon footprint, and blueness assessments for the novel method were conducted to verify the sustainability and functionality. The thirteen subdivisions in the GAPI pictogram, which were categorized as either green or yellow, refer to moderate green aspects. The final AGREE score of 0.56 and the majority of its subdivisions, ranging from dark green to yellow, indicated a relatively moderate level of greenness. This was primarily due to the significant acetonitrile content (56%) in the mobile phase. Using the HEXAGON method, the ultimate score is 0 out of 5 since the total calculated carbon footprint is less than 0.10. An eco-friendly method is one with a reduced carbon footprint score. The innovative HPLC method's functioning and utility are indicated via its overall BAGI score of 80.0. Generally, the outcomes of the AGREE and GAPI pictograms indicate that the HPLC-DAD has a greenness feature, despite its moderate sensitivity.

Green approach for simultaneous determination of long-acting β-agonists, their organic counterparts and corticosteroids by HPLC coupled with PDA detector

OBJECTIVE

Accurate, precise and robust HPLC method was developed for the simultaneous estimation of long-acting β2 agonist drugs (formoterol fumarate, salmeterol xinafoate and vilanterol trifenatate) along with two organic counterparts (xinafoic acid and triphenyl acetic acid) and inhaled corticosteroids (fluticasone propionate and fluticasone furoate).

MATERIAL AND METHODS

The separation was carried out using C18 column (250×4.6mm, 5μ) with eluent comprising of 0.05% orthophosphoric acid: methanol: acetonitrile (40:30:30, v/v/v) at a 1mL/min flow rate.

RESULTS

Linearity was observed in the concentration ranges of 1.5-12μg/mL for formoterol fumarate, 2.82-22.6μg/mL for xinafoic acid, 6.25-50μg/mL for vilanterol, 3.12-25μg/mL for salmeterol, 2.0-15.2μg/mL for triphenyl acetic acid, 62.5-500μg/mL for fluticasone propionate and 25-200μg/mL for fluticasone furoate.

CONCLUSION

The proposed method was accurate, precise and robust and results were within the limit as per the ICH (Q2R1) guidelines. Additionally, the proposed method was found to be green and sustainable when analysed by different green analytical tools namely GAPI, AGREE, AGREEprep and BAGI.

Norfloxacin Fluorescent Probe for the Assessment of Cefepime in Biological Fluids and Pharmaceutical Formulation; Investigation of the Greenness and Blueness Characteristics

In the present study, a norfloxacin (NFX) fluorescent probe was tailored for the spectrofluorometric measurement of cefepime (CFP). The proposed approach measured the quenching effect of CFP on the fluorescence intensity of NFX in acetate buffer solution. The obtained results show that CFP strongly quenches the fluorescence of NFX in a static mechanism. Under the optimal conditions, plotting the fluorescence quenching values (∆F) against CFP concentrations resulted in two ranges varying from 0.8 to 28 μg/mL (r2 = 0.9979) and from 40 to 92 μg/mL (r2 = 0.9929). Furthermore, the limits of quantification and detection were 2.0526 and 0.6773 μg/mL, respectively. In terms of intra- and inter-day recorded precisions (n = 5), the % RSD ranged between 0.31% and 0.6% and 0.55% and 1.02%, respectively. Additionally, practicality/applicability and the green feature of the new method were considered by BAGI and AGREE automated approaches. The new spectrofluorometric approach was positively applied for the quantification of CFP in injection powder and spiked biological fluids, including spiked human urine and plasma samples. According to previously published fluorescence methods, the present method is considered the first fluorescence one for the assay of CFP in human biological fluids with accurate and precise results.

Assessing Antiparasitic Compounds Persistence in Cattle Hair by DART-MS

This study introduces an alternative strategy for evaluating antiparasitic persistence compounds in cattle hair by Direct Analysis in Real Time Mass Spectrometry (DART-MS). The developed DART-MS method aimed to determine fenthion, chlorpyrifos, and cypermethrin in cattle hair samples. DART-MS analyses were performed in positive ion mode, and parameters related to the DART source were evaluated. The analytical performance demonstrated the efficiency of the optimized DART-MS method for fenthion, chlorpyrifos, and cypermethrin quantification in the evaluated samples, meeting criteria for precision, accuracy and limits of detection. Overall, the DART-MS method provided a fast and efficient analysis for determination of antiparasitic agents in cattle hair, which contributes to the evaluation of drug administration protocols and dosage intervals, and aids the safety and advancement of the livestock sector.

AQbD-enhanced green RP-UPLC-PDA methodology for quantification and forced degradation studies for omeprazole, amoxicillin, and rifabutin

The ternary combination like omeprazole (OMP), amoxicillin (AMX), and rifabutin (RFB) was approved by the FDA in November 2019 for combating Helicobacter pylori infections and ulcers caused by this infection. This study aims to develop and authenticate a robust and eco-friendly RP-UPLC technique aimed at the concurrent analysis of OMP, AMX, and RFB, following ICH guidelines, Analytical Quality by Design (AQbD), and green analytical chemistry (GAC) principles. The analysis used the Thermo C18 column (100 mm × 2.1 mm, 1.7 µm), ethanol, and formic acid solution (43:57) as mobile phase with a flow rate of 0.2 ml/min at 272 nm. The method was developed based on the ICH Q14 and validated according to ICH Q2(R1) followed by Forced degradation studies under various conditions. The method showed good linearity for OMP, AMX, and RFB, with coefficient of determination (r2) of 0.9995, 0.9993, and 0.9997, respectively. Precision studies indicated low %RSD values, confirming high reproducibility. Forced degradation studies confirmed the stability of the drugs for 30 min in acid, base, and redox reactions, and they were also stable for 6 h at 105 °C in dry conditions. GAPI assessment depicted a green and yellow pictogram, AGREE scored 0.85, BAGI scored 80, and RGB12 Whiteness Assessment Tool scored 97.5%. The developed RP-UPLC-PDA technique is robust and reliable for the concurrent quantification of the triple combination. It aligns with sustainability goals, enhancing the efficiency and environmental sustainability of pharmaceutical analysis, and setting a benchmark for future analytical methods.

Investigating the stability of a cerebral vasodilator drug using chromatographic methods: Evaluation of methods' practicality and environmental aspects

A vinca alkaloid; vinburnine (VNB) is utilized as an effective vasodilator. As a cyclic amide-containing drug, it is likely susceptible to hydrolytic degradation. This study examined the degradation profile of VNB, findings indicated that VNB undergoes degradation solely in the presence of alkali, generating a carboxylic acid derivative (DEG). The present study aimed to design and apply green TLC-densitometric and RP-HPLC assays for concurrently measuring VNB and its degradation product for the first time. TLC-densitometric assay was carried out on silica gel 60 F254 TLC plates and a developing system of ethyl acetate: methanol: triethylamine (6:4:0.05, by volume) and detection at 230 nm. RP-HPLC method depended on a C8 column and a mixture of methanol: water (95:5, v/v). The rate of flow was 1 mL/min and UV detection at 230 nm. The proposed assays were used for prediction of the degradation behavior of VNB under the mentioned conditions and then applied for quantitation of VNB in its commercially available capsules. Four distinct metric approaches; National Environmental Method Index (NEMI), Analytical Eco-Scale, Green Analytical Procedure Index (GAPI), and Blue Applicability Grade Index (BAGI) were utilized to assess the chromatographic method's ecological effect. Findings obtained from the provided methodologies were contrasted statistically with the stated HPLC method using Student's t and F-tests. The analysis revealed that there were no significant differences between them. The established methods were verified in accordance with the recommendations of the International Council for Harmonization (ICH), and all the outcomes were deemed to fall within the permissible limit.

Innovative anti-proliferative effect of the antiviral favipiravir against MCF-7 breast cancer cells using green nanoemulsion and eco-friendly assessment tools

Telomerase enzyme prevents telomere shortening during division, having human telomerase reverse transcriptase (hTERT) as its catalytic subunit. Favipiravir (FAV), an RNA-dependent RNA polymerases inhibitor, shared structural similarity with hTERT and thus assumed to have cytotoxic effect on cancer cells, in addition to its prophylactic effect to immunocompromised cancer patients. Nanoemulsion (NE) is a potential tumor cells targeting delivery system, thereby enhancing therapeutic efficacy at the intended site, mitigating systemic toxicity, and overcoming multidrug resistance. The objective of this study is to develop a green FAV nanoemulsion (FNE) that is environmentally friendly and safe for patients, while aiming to enhance its cytotoxic effects. The study also highlights the environmental sustainability of the developed RP-HPLC method and assesses its greenness impact. The FNE formulation underwent thermodynamic stability testing and invitro characterization. Greenness was assessed using advanced selected tools like the Analytical Eco-Scale (AES), Analytical Greenness Metric for Sample Preparation (AGREEprep), and green analytical procedure index (GAPI). The cytotoxic potential of FNE was screened against MCF-7 breast cancer and Vero normal cell lines using SRB assay. Stable and ecofriendly FNE was formulated having a particle size (PS) of 25.29 ± 0.57 nm and a zeta potential of -6.79 ± 5.52 mV. The cytotoxic effect of FNE on MCF-7 cells was more potent than FAV with lower IC50 while FNE showed non-toxic effect on VERO normal cell line. Therefore, the FAV nanoemulsion formulation showed targeted cytotoxicity on MCF-7 cells while being non-toxic on normal Vero cells.

Analysis of binary mixture of oxytetracycline and bromohexine in their combined veterinary formulation by four simple spectrophotometric methods with greenness assessment

Tetracyclines family is considered as the first-line antibiotic drugs for food animals. Formulating bromhexine (BR) with oxytetracycline (OTC) improved the antibacterial activity of OTC, besides it is considered as a mucolytic agent. Four precise, rapid, and simple spectrophotometric methods were successfully developed for resolution of the overlapped spectra of OTC and BR in their pure form and in their pharmaceutical formulation. The proposed methods are absorption correction (AC), dual wavelength (DW), induced dual wavelength (IDW), and spectrum subtraction (SS) spectrophotometric methods. The developed methods were used for the determination of OTC and BR in the ranges of 2-50 µg/mL and 1-30 µg/mL, respectively for all methods. For (AC) and (SS) methods, OTC and BR were determined at 380 nm and 245.6 nm, respectively after spectral resolution steps. While for (DW) method, the absorbance difference between λ (271.8 -287.6 nm) and λ (245.6 -283.2 nm) were used for the determination of OTC and BR, in order. For IDW, it depended on using the absorbance difference between 271.8 nm and 245.6 nm as well as the equality factor (F) calculated for each drug at the selected wavelengths. In all methods, HCl was used as a solvent and they are validated according to ICH guidelines. Several green metric tools have been developed to evaluate the greenness of the analytical methods like National Environmental Methods Index (NEMI), Modified NEMI, Analytical Eco-scale, Green Analytical Procedure Index (GAPI) and Analytical GREEnness calculator (AGREE), and all ensured the low impact of the suggested approaches on health and environment. The proposed methods are highly selective, robust and precise. Additionally they are time and money effective and can be used in any analytical laboratory.

An eco-friendly approach for analysing sugars, minerals, and colour in brown sugar using digital image processing and machine learning

Brown sugar is a natural sweetener obtained by thermal processing, with interesting nutritional characteristics. However, it has significant sensory variability, which directly affects product quality and consumer choice. Therefore, developing rapid methods for its quality control is desirable. This work proposes a fast, environmentally friendly, and accurate method for the simultaneous analysis of sucrose, reducing sugars, minerals and ICUMSA colour in brown sugar, using an innovative strategy that combines digital image processing acquired by smartphone cell with machine learning. Data extracted from the digital images, as well as experimentally determined contents of the physicochemical characteristics and elemental profile were the variables adopted for building predictive regression models by applying the kNN algorithm. The models achieved the highest predictive capacity for the Ca, ICUMSA colour, Fe and Zn, with coefficients of determination (R2) ≥ 92.33 %. Lower R2 values were observed for sucrose (81.16 %), reducing sugars (85.67 %), Mn (83.36 %) and Mg (86.97 %). Low data dispersion was found for all the predictive models generated (RMSE < 0.235). The AGREE Metric assessed the green profile and determined that the proposed approach is superior in relation to conventional methods because it avoids the use of solvents and toxic reagents, consumes minimal energy, produces no toxic waste, and is safer for analysts. The combination of digital image processing (DIP) and the kNN algorithm provides a fast, non-invasive and sustainable analytical approach. It streamlines and improves quality control of brown sugar, enabling the production of sweeteners that meet consumer demands and industry standards.

Full green assay of parenteral dosage forms of polymyxins utilizing xanthene dye: application to content uniformity testing

Due to the lack of other treatment options, a rebirth of polymyxins is urgently required. Colistin (also called polymyxin E) and polymyxin B are the only two examples of this antibiotic class that were effectively employed in such critical situations. In the present work, both of the two studied medications were quantified via a simple, green, and non-extracting spectrophotometric approach based on the formation of ion-pair complexes with Erythrosine B. Without using any organic solvents, the pink color of the created complexes was detected at wavelength = 558 nm. To achieve the highest intensity of absorbance, optimum conditions were established by the screening of many experimental factors such as pH, buffer volume, the volume of Erythrosine B, and the time consumed to undergo the reaction. For Colistin and Polymyxin B respectively, Beer-Lambert's law was observed at the concentration ranges of 1-6, 1-9 µg mL- 1. The technique was approved and validated following ICH recommendations. Lastly, the suggested approach has been successfully implemented to quantify the cited medications colorimetrically, for the first time, in their parenteral dosage forms with excellent recoveries. Also, Content uniformity testing was implemented.

Development of LC-MS/MS method for quantification of Lurasidone using volumetric absorptive microsampling (VAMS); a comparative study between dried blood and plasma samples

The ecological impact of biological, chemical, and analytical research practices, including toxic reagents and biohazardous waste, has led to the development of alternative sampling and extraction techniques for bioanalysis. Microsampling (sample volume < 50 µL) aligns with the 3Rs principle, allowing multiple sampling points from the same animal at different time points and improving animal welfare. A bioanalytical method was developed to investigate factors related to bioanalytical challenges and the implementation of microsampling techniques. An LC-MS/MS method for Volumetric Absorptive Microsampling (VAMS), 20 µL, was developed for quantifying Lurasidone using a liquid-liquid extraction technique. The method uses a C18, Phenomenex column for chromatographic separation and a mobile phase composition of Methanol, Acetonitrile, and Water with 0.1 % HFBA. The method was validated over a concentration range of 5.0 to 1200.0 ng/mL and achieved acceptable precision and accuracy. The recovery for analyte from VAMS was approximately 40% at four different concentrations and is consistent (%CV < 15), with no significant differences among HCT levels. The matrix factor ranged between 85.00 and 115.00 %, showing no substantial issues with reduced or enhanced signal. The stability data showed no significant degradation of LUR in VAMS samples when stored at room temperature for 15 days. The newly established method for Lurasidone confirmed the use of VAMS sampling method and its analysis on LC-MS/MS. Further, the data obtained from microsampling techniques was compared with conventional (plasma) technique, as proof-of-concept, and it confirms the agreement between the two methods. The study supports the advantages of microsampling in protecting the environment and animals while maintaining scientific judgement.

High Performance Thin Layer Chromatography (HPTLC) Analysis of Anti-Asthmatic Combination Therapy in Pharmaceutical Formulation: Assessment of the Method's Greenness and Blueness

A cost-effective, selective, sensitive, and operational TLC-densitometric approach has been adapted for the concurrent assay of Hydroxyzine Hydrochloride (HYX), Ephedrine Hydrochloride (EPH), and Theophylline (THP) in their pure powder and pharmaceutical forms. In the innovative TLC-densitometric approach, HYX, EPH, and THP were efficaciously separated and quantified on a 60F254 silica gel stationary phase with chloroform-ammonium acetate buffer (9.5:0.5, v/v) adjusted to pH 6.5 using ammonia solution as a mobile liquid system and UV detection at 220 nm. The novel TLC method validation has been performed in line with the international conference for harmonization (ICH) standards and has been effectively used for the estimation of the researched medicines in their pharmaceutical formulations without intervention from excipients. Additionally, parameters affecting the chromatographic analysis have been investigated. The new TLC approach's functionality and greenness were appraised using three modern and automated tools, namely the Blue Applicability Grade Index (BAGI), the Analytical Greenness metric (AGREE), and the Green Analytical Procedure Index (GAPI) tools. In short, the greenness characteristics were not achieved as a result of using mandatory, non-ecofriendly solvents such as ammonia and chloroform. On the contrary, the applicability and usefulness of the novel TLC approach were attained via concurrent estimation for the three drugs using simple and straightforward procedures. Moreover, the novel TLC method outperforms previously published HPLC ones in terms of the short run time per sample and moderate pH value for the liquid system. According to the conclusions of comparisons with previously recorded TLC methods, our novel HPTLC method has the highest AGREE score, so it is the greenest HPTLC strategy. Moreover, its functionality and applicability are very appropriate because of the simultaneous assessment of three drugs in one TLC run. Furthermore, no tedious and complicated extraction and evaporation processes are prerequisites.

An eco-friendly first and second derivative synchronous spectrofluorimetry for quantification of florfenicol in presence of its different degradation products. Application to kinetic stability study

Two rapid, simple, sensitive and selective derivative spectrofluorimetric methods (first and second derivative synchronous spectrofluorimetric (FDSFS and SDSFS) procedures) have been developed for the analysis of florfenicol in the presence of its various degradation products. FDSFS was applied to assay the drug in the presence of its alkaline, oxidative and photolytic degradation products while SDSFS was used to quantify it in the presence of its acidic degradation product. These methods permitted quantification of florfenicol at corresponding λ Em of 288, 287, 279 and 284 nm without interferences from any of its degradation products. Full validation procedures were applied to the suggested method according to International Conference of Harmonization guidelines. Moreover, different degradation kinetic parameters were calculated such as half-life (t 1/2), degradation rate constant (K) and activation energy (E a). Using the analytical eco-scale, green analytical procedure index and analytical greenness metric approach AGREE as greenness assessment tools, the proposed method was found to be environmentally friendly.

Development of a green high-performance liquid chromatography method for tofacitinib quantification in pharmaceutical formulations and degradation studies

A new high-performance liquid chromatography (HPLC) method was applied for the quantification of the active substance of tofacitinib. Analysis was performed on a Chromasil 100 C18 (100.0 × 4.0 mm, 3.5 μm) stationary phase. The mobile phase consisted of acetonitrile:0.2% phosphoric acid in water (12:88, v/v). The prepared sample (20.0 μL) was injected into the system. A detection wavelength of 285.0 nm was chosen for the compound, and the flow rate was 0.8 mL/min. The experiment was completed in 5.0 min. The analysis temperature was set to 40.0°C. The method was evaluated using green chemistry. The method was validated according to the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines. For linearity studies calibration curves were constructed in the range of 10.0-200.0 μg/mL. The recovery values were calculated at 97.66% and 105.68%. The method developed for the analysis of the active substance had a short analysis time and was cost-effective. It is an environmentally friendly method due to the mobile phase content used. The technique can be used in laboratory analysis and bioequivalence experiments.

Quantitative analysis of solid dosage forms of Atenolol by Raman spectroscopy

OBJECTIVE

To develop a Raman spectroscopy-based analytical model for quantification of solid dosage forms of active pharmaceutical ingredient (API) of Atenolol.Significance: For the quantitative analysis of pharmaceutical drugs, Raman Spectroscopy is a reliable and fast detection method. As part of this study, Raman Spectroscopy is explored for the quantitative analysis of different concentrations of Atenolol.

METHODS

Various solid-dosage forms of Atenolol were prepared by mixing API with excipients to form different solid-dosage formulations of Atenolol. Multivariate data analysis techniques, such as Principal Component Analysis (PCA) and Partial least square regression (PLSR) were used for the qualitative and quantitative analysis, respectively.

RESULTS

As the concentration of the drug increased in formulation, the peak intensities of the distinctive Raman spectral characteristics associated with the API (Atenolol) gradually increased. Raman spectral data sets were classified using PCA due to their distinctive spectral characteristics. Additionally, a prediction model was built using PLSR analysis to assess the quantitative relationship between various API (Atenolol) concentrations and spectral features. With a goodness of fit value of 0.99, the root mean square errors of calibration (RMSEC) and prediction (RMSEP) were determined to be 1.0036 and 2.83 mg, respectively. The API content in the blind/unknown Atenolol formulation was determined as well using the PLSR model.

CONCLUSIONS

Based on these results, Raman spectroscopy may be used to quickly and accurately analyze pharmaceutical samples and for their quantitative determination.

A design of experiment based RP-HPLC method for the simultaneous estimation of antihypertensive drugs with greenness assessment

The correlation between blood pressure (BP) and cardiovascular risk has a continuous, positive, and linear pattern. Lowering high BP decreases the risk associated with cardiovascular disease. Chlorthalidone (CHD) and Losartan potassium (LOS) combination is used to treat hypertension. The analytical community was concerned with minimizing or reducing the use of toxic chemicals and solvents. Therefore, the current study aimed to develop a rapid, sensitive, and cost-effective green RP-HPLC method to determine CHD and LOS simultaneously in a short analysis of time. Method optimization was performed by Central composite design (CCD), the flow rate and the change of time were chosen as factors. Effective separation was conducted on Zorbax SB-C18 (4.6 mm × 150 mm, 5 μm) column by gradient mobile phase comprising phosphate buffer and ethanol flowing at 0.859 ml/min, and the wavelength detected at 230 nm. As per ICH criteria, the technique was proven to be precise, accurate, and linear over the concentration range of 4.3-8.1 μg/ml for CHD and 35-65 μg/ml for LOS. Furthermore, the method's greenness was examined by three different metrics, confirming that less toxic effect on the environment. Hence, the optimized approach proves to be eco-friendly, simple, and robust for the concurrent evaluation of CHD and LOS in pharmaceutical formulations.

A voltammetric method coupled with chemometrics for determination of a ternary antiparkinson mixture in its dosage form: greenness assessment

An electroanalytical methodology was developed by direct differential pulse voltammetric (DPV) measurement of Levodopa (LD), Carbidopa (CD) and Entacapone (ENT) mixture using bare glassy carbon electrode (GCE) in Britton Robinson (BR) buffer (pH = 2.0). A multivariate calibration model was then applied to the exported preprocessed voltammetric data using partial least square (PLS) as a chemometric tool. Additionally, the model was cross-validated and the number of latent variables (LVs) were determined to produce a reliable model for simultaneous quantitation of the three drugs either in their synthetic mixtures or in their marketed pharmaceutical formulation with high accuracy and precision. Data preprocessing was used to tackle the problem of lacking bi-linearity which is commonly found in electrochemical data. The proposed chemometric model was able to provide fast and reliable technique for quantitative determination of antiparkinson drugs in their dosage forms. This was successfully achieved by utilizing sixteen mixtures as calibration set and nine mixtures as validation set. The percent recoveries for LD, CD and ENT were found to be 100.05% ± 1.28%, 100.04% ± 0.53% and 99.99% ± 1.25%, respectively. The obtained results of the proposed method were statistically compared to those of a previously reported High Performance Liquid Chromatography (HPLC) methodology. Finally, the presented analytical method strongly supports green analytical chemistry regarding the minimization of potentially dangerous chemicals and solvents, as well as reducing energy utilization and waste generation.

AQbD TLC-densitometric method approach along with green fingerprint and whiteness assessment for quantifying two combined antihypertensive agents and their impurities

Preserving the environment, reducing the amount of waste resulting from chemical trials, and reducing the amount of energy consumed have currently become a pivotal global trend. An analytical quality by design (AQbD) based eco-friendly TLC-densitometric method was implemented for quantifying two antihypertensive agents, captopril (CPL) and hydrochlorothiazide (HCZ), along with their impurities; captopril disulphide (CDS), chlorothiazide (CTZ) and salamide (SMD). The analytical target profile (ATP) was first identified, followed by selecting the critical analytical attributes (CAAs), such as retardation factors and resolution between the separated peaks. Critical method parameters (CMPs) that may have a crucial influence on CAAs were identified and emanated through the quality risk assessment phase. A literature survey-based preliminary studies were performed, followed by optimization of the selected CMPs through a custom experimental design to attain the highest resolution with optimum retardation factors. Moreover, method robustness was also tested by testing the design space. Complete separation of the drugs and their impurities was achieved using ethyl acetate: glacial acetic acid (6: 0.6, v/v) as a developing system applied to a 12 cm length TLC plate at room temperature with UV scanning at 215 nm. Calibration graphs were found to be linear in the ranges of (0.70-6.00), (0.10-2.00), (0.20-1.00), (0.07-1.50) and (0.05-1.00) µg/band corresponding to CPL, HCZ, CDS, CTZ, and SMD, respectively. Four different green metric tools were used to evaluate the greenness profile of the proposed method, and results showed that it is greener than the reported HPLC method. Method whiteness assessment was also conducted. Moreover, the method performance was evaluated following the ICH guidelines, and the outcomes fell within the acceptable limits. The developed method could be approved for routine assay of the cited components in their pharmaceutical formulations and bulk powder without interference from the reported impurities. The issue of concern is saving money, especially in developing countries.

Basic Fuchsin Dye as the First Fluorophore for Optical Sensing of Morpholine in Fruits Crust and Urine Samples

In this work, basic fuchsin (BF) dyestuff was presented as the first optical sensor used for the spectrofluorimetric assessment of morpholine (MOR) where BF exhibits morpholine-sensing behavior. The developed fluorimetric avenue is sensitive, facile, selective, and validated for assaying the sensitizing influence of MOR on the BF fluorescence in an aprotic dioxane solvent. Parameters like solvents, BF concentration, order, and time of addition that influence the fluorescence intensity of the probing system were addressed. Optimizing the analytical methodology revealed a linear fluorescence sensitization within the addition of MOR in the two concentration ranges of 5 × 10-9 to 1.0 × 10-7 mol L-1 and 2.0 × 10-7 to 3 × 10-6 mol L-1. The limit of detection (LOD) and limit of quantification (LOQ) were estimated to be 2.0 × 10-9 mol L-1 (0.17 ng mL-1) and 6.66 × 10-9 mol L-1 (0.567 ng mL-1), respectively. High levels of accuracy and precision are achieved when assaying spiked MOR either in pure solutions or samples of fruit peel extract and human urine. Moreover, the green character and practicality/applicability of the method were evaluated by AGREE and BAGI metric tools. These merit outcomes provide insights into the development of fluorescent sensors for MOR detection using fluorescent dyes and meet the Food and Drug Administration's requirements for morpholine detection in real-life applications.

Greenness assessment of UPLC/MS/MS method for determination of two antihypertensive agents and their harmful impurities with ADME/TOX profile study

Hypertension is described by the world health organization (WHO) as a serious medical problem that significantly affects the heart, brain and kidneys. It is a major cause of premature death worldwide. The present study aims to quantify the combination of captopril (CPL), hydrochlorothiazide (HCZ) and their harmful impurities; captopril disulphide (CDS), chlorothiaizde (CTZ) and salamide (SMD). In-silico study was conducted for estimation of pharmacokinetic parameters (ADMET) as well as toxicity profile of the proposed impurities. The results showed that the three impurities under investigation had poor permeability to CNS and cannot pass the blood-brain barrier (BBB), reducing the likelihood of causing side effects in the brain. On the other hand, all studied impurities were found to be hepatotoxic. In consequence, a highly sensitive and green ultra-performance liquid chromatography- tandem mass spectrometric (UPLC/MS/MS) method was developed and validated for separation of the cited drugs in the presence of their harmful impurities; methanol and 0.1% formic acid (90:10, v/v) mixture was used as a mobile phase, eluted at a constant flow rate of 0.7 mL/min at room temperature. Detection was adopted using a tandem mass spectrometer in a positive mode only for CPL and negative mode for HCZ, CDS, CTZ and SMD. Separation was performed within 1 min. Calibration graphs were found to be linear in the ranges of (50.0-500.0 ng mL-1), (20.0-500.0 ng mL-1), (10.0-250.0 ng mL-1), (5.0-250.0 ng mL-1) and (20.0-400.0 ng mL-1) corresponding to CPL, HCZ, CDS, CTZ and SMD, respectively. Additionally, comparative study of greenness profile was established for the proposed and reported methods using five green metric tools. The proposed method was found to be greener than the reported HPLC method. The developed (UPLC/MS/MS) method was validated according to (ICH) guidelines and it was found to has greater sensitivity, shorter analysis time and lower environmental impact compared to the reported methods.

Development and validation of an effective and sensitive technique for nitrate determination in fruits and vegetables using HPLC/PDA

This study aims to develop an effective and sensitive HPLC (High Performance Liquid Chromatography) method to determine the nitrate concentration in fruits and vegetables (F & V) using a C18 column (ZORBAX Eclipse XDB-C18, 80Å, 250 × 4.6 mm, 5 μm (Agilent Technologies)) maintained at 40 0 C, a mobile phase made up of methanol and buffer (pentane sulfonic acid sodium salt solution), and a Photo Diode Array Detector (PDA) at 225 nm. The developed method is validated in terms of selectivity, linearity, accuracy, precision, suitability, the limit of detection (LOD), and the limit of quantification (LOQ) according to the European Union Decision 2002/657/EC. The result revealed that a ratio of 30: 70 of the organic modifier methanol and buffer with pH 2.8 shows the highest efficiency. The calibration curve shows linearity with a correlation coefficient (r) of 0.9985. The LOD and LOQ were found to be 2.26 mg/kg and 7.46 mg/kg. The recovery was in the range of 98.96-100.21%. Moreover, the greenness assessment scores of different approaches (eco-scale score of 76, AGREE score of 0.71, and few red shades in GAPI portray) were at a very excellent level. Thus, our developed method is fully validated and can determine the nitrate content in F & V.

Fast and green universal method to analyze and quantify anthocyanins in natural products by UPLC-PDA

This work developed a universal UPLC-PDA method based on safe reagents to analyze anthocyanins from different foods. Nine foods were studied by the developed chromatographic method, which was constructed using a solid core C18 column and a binary mobile phase composed of (A) water (0.25 mol_{citric acid}.L_solvent^-1), and (B) ethanol. A total running time of 6 min was obtained, the faster comprehensive method for anthocyanins analysis. Mass spectrometry analysis was employed to identify a comprehensive set of 53 anthocyanins comprising glycosylated and acylated cyanidin, pelargonidin, malvidin, peonidin, petunidin, and delphinidin derivatives. Cyanidin-3-O-glucoside (m/z⁺ 449) and cyanidin-3-O-rutinoside (m/z⁺ 595) were used as standards to validate the accuracy of the developed method. The analytical parameters were evaluated, including intra-day and inter-day precision, robustness, repeatability, retention factor (k), resolution, and peak symmetry factor. The current method demonstrated excellent chromatographic resolution, making it a powerful tool for analyzing anthocyanins pigments.

Development and validation of an eco-friendly HPLC-UV method for determination of atorvastatin and vitamin D3 in pure form and pharmaceutical formulation

Statin-associated muscle symptoms are considered as obvious adverse effects of prolonged statin therapy such as myopathy, myalgia, and rhabdomyolysis. These side effects are associated with vitamin D₃ deficiency and can be adjusted by amendment of serum vitamin D₃ level. Green chemistry aims to decrease the harmful effects of analytical procedures. Here we have developed a green and eco-friendly HPLC method for the determination of atorvastatin calcium and vitamin D₃. The two drugs were separated in less than 10 min on Symmetry column C₁₈ (100 × 4.6 mm, 3.5 µm) using a mixture consisting of 0.1% ortho-phosphoric acid (OPA) (pH = 2.16) and ethanol as the mobile phase in gradient manner. We have used Green Analytical Procedure Index (GAPI) tools and the Analytical GREEnness Metric Approach (AGREE) for assessment of the greenness of our proposed method. The method proved linearity over concentration ranges of (5-40) and (1-8) µg/ml with low limit of detection of 0.475 and 0.041 µg/ml for atorvastatin calcium and vitamin D₃ respectively. The method was successfully validated in accordance with ICH instructions and utilized for determination of the drugs of interest either in pure form or in their pharmaceuticals.

The first facile optical density-dependent approach for the analysis of doxorubicin, an oncogenic agent accompanied with the co-prescribed drug; paclitaxel

Doxorubicin (DRB) is an anthracycline oncogenic drug extracted from cultures of Streptomyces peucetius var. caesius. It is frequently recommended as an anti-neoplastic agent for the treatment of diverse malignancies. It exerts its antineoplastic effect either via inhibiting the enzyme topoisomerase II and/or via intercalation to DNA or reactive oxygen species generation. In the present article, the direct, simple, one-pot, somewhat eco-safe, and non-extractive spectrophotometric system was executed to track doxorubicin, a chemotherapeutic remedy, in the presence of paclitaxel, a naturally occurring Taxan antineoplastic radical, through the greenness rated method. DRB's optical density was studied in various mediums and solvents to develop the current approach. An acidic ethanolic solution was found to increase the optical density of the sample significantly. At 480 nm., the most remarkable optical density was obtained. Various experimental factors, including intrinsic media, solvent, pH, and stability time, were investigated and controlled. The current approach achieved linearity within the 0.6-40.0 µg mL-1 range, accompanied by a limit of both detection and quantification (LOD and LOQ) of 0.18 and 0.55 µg mL-1, correspondingly. The approach was validated under the ICH guidelines (Quality Guidelines). The system's greenness and enhancement degree were estimated.

Green Spectrophotometric Determination of Organophosphate in Selected Fruits and Vegetables

A simple, sensitive, precise, and environmentally safe spectrophotometry method was developed and validated for the determination of organophosphate in various fruits and vegetables using a UV-Visible spectrophotometer using a magnesia mixture. The volume of reagent used for analysis and the stability of the color complex were also optimized. The drug showed a stable white color complex at 420 nm. The greenness of the methods was estimated using an ecoscale (84), the Green Analytical Procedure Index, and AGREE (0.89), which were found to be excellent green method based on spectrophotometric determination. The method was validated using ICH guidelines and has acceptable values for linearity (0.5-2.5 mg/ml), accuracy (98.5-102.5%), precision, robustness, limit of detection (0.16 mg), and limit of quantification (0.486 mg). The concentration of the organophosphate in the analyzed sample was in the range of 0.003 to 2.45 mg. Altogether, the proposed green analytical method was found to be a simple, selective, sensitive, accurate, and ecofriendly method for the analysis of organophosphate in various fruits and vegetables.

Univariate versus multivariate spectrophotometric data analysis of triamterene and xipamide; a quantitative and qualitative greenly profiled comparative study

Triamterene (TRI) and xipamide (XIP) mixture is used as a binary medication of antihypertension which is considered as a major cause of premature death worldwide. The purpose of this research is the quantitative and qualitative analysis of this binary mixture by green univariate and multivariate spectrophotometric methods. Univariate methods were zero order absorption spectra method (D⁰) and Fourier self-deconvolution (FSD), as TRI was directly determined by D⁰ at 367.0 nm in the range (2.00-10.00 µg/mL), where XIP show no interference. While XIP was determined by FSD at 261.0 nm in the range (2.00-8.00 µg/mL), where TRI show zero crossing. Multivariate methods were Partial Least Squares, Principal Component Regression, Artificial Neural Networks, and Multivariate Curve Resolution-Alternating Least Squares. A training set of 25 mixtures with different quantities of the tested components was used to construct and evaluate them, 3 latent variables were displayed using an experimental design. A set of 18 synthetic mixtures with concentrations ranging from (3.00-7.00 µg/mL) for TRI and (2.00-6.00 µg/mL) for XIP, were used to construct the calibration models. A collection of seven synthetic mixtures with various quantities was applied to build the validation models. All the proposed approaches quantitative analyses were evaluated using recoveries as a percentage, root mean square error of prediction, and standard error of prediction. Strong multivariate statistical tools were presented by these models, and they were used to analyze the combined dosage form available on the Egyptian market. The proposed techniques were evaluated in accordance with ICH recommendations, where they are capable of overcoming challenges including spectral overlaps and collinearity. When the suggested approaches and the published one were statistically compared, there was no discernible difference between them. The green analytical method index and eco-scale tools were applied for assessment of the established models greenness. The suggested techniques can be used in product testing laboratories for standard pharmaceutical analysis of the substances being studied.

Green quality by design HPLC approach for the simultaneous determination of Bilastine and Montelukast

For the simultaneous estimation of two co-formulated antihistaminic drugs (Bilastine and Montelukast), a novel and eco-friendly reversed-phase HPLC approach with both diode array and fluorescence detection modes was designed. Rather than using the routine methodology, the Quality by Design (QbD) approach was adopted to speed up the method development and to test robustness of the method. To evaluate the effect of variable factors on chromatographic response, a full factorial design was used. The chromatographic separation was performed using isocratic elution on the C18 column. The mobile phase consists of 92% methanol, 6% acetonitrile, and 2% phosphate buffer with 0.1 (v/v) triethylamine adjusted to pH 3, it was pumped at a flow rate of 0.8 mL/min with an injection volume of 20 μL. The developed stability indicating HPLC approach was used to assess the stability of montelukast (MNT). It was subjected to a variety of stress conditions, including hydrolytic (acid-base), oxidative, thermal, and photolytic stress conditions. All of these conditions were found to have relevant degradation pathways. Under the described experimental conditions, MNT degradation followed pseudo-first-order kinetics. The kinetic parameters of its degradation (rate constant and t_1/2) were calculated and a proposal for the degradation pathway was postulated.

Energy Consumption and Carbon Footprint of 3D Printing in Pharmaceutical Manufacture

Achieving carbon neutrality is seen as an important goal in order to mitigate the effects of climate change, as carbon dioxide is a major greenhouse gas that contributes to global warming. Many countries, cities and organizations have set targets to become carbon neutral. The pharmaceutical sector is no exception, being a major contributor of carbon emissions (emitting approximately 55% more than the automotive sector for instance) and hence is in need of strategies to reduce its environmental impact. Three-dimensional (3D) printing is an advanced pharmaceutical fabrication technology that has the potential to replace traditional manufacturing tools. Being a new technology, the environmental impact of 3D printed medicines has not been investigated, which is a barrier to its uptake by the pharmaceutical industry. Here, the energy consumption (and carbon emission) of 3D printers is considered, focusing on technologies that have successfully been demonstrated to produce solid dosage forms. The energy consumption of 6 benchtop 3D printers was measured during standby mode and printing. On standby, energy consumption ranged from 0.03 to 0.17 kWh. The energy required for producing 10 printlets ranged from 0.06 to 3.08 kWh, with printers using high temperatures consuming more energy. Carbon emissions ranged between 11.60-112.16 g CO₂ (eq) per 10 printlets, comparable with traditional tableting. Further analyses revealed that decreasing printing temperature was found to reduce the energy demand considerably, suggesting that developing formulations that are printable at lower temperatures can reduce CO₂ emissions. The study delivers key initial insights into the environmental impact of a potentially transformative manufacturing technology and provides encouraging results in demonstrating that 3D printing can deliver quality medicines without being environmentally detrimental.

Spider diagram and sustainability evaluation of UV-methods strategy for quantification of aspirin and sildenafil citrate in the presence of salicylic acid in their bulk and formulation

The cutting-edge combination of aspirin (ASA) and sildenafil citrate (SIC) has been presented as a suggested dosage form for the treatment of thin endometrium and erectile dysfunction, particularly in patients with cardiovascular diseases. However, ASA is highly sensitive to degradation into its major deterioration product, known as salicylic acid (SA). Consequently, it is eminently essential to evolve approaches for the synchronous quantification of ASA and SIC in the presence of SA. The main objective of this work is to develop three approaches for the synchronous quantification of ASA and SIC in the presence of SA in their commixtures and suggested formulations without any prior separation. Three green UV-methods were employed for the synchronous quantification, namely: Dual Wavelength in Ratio Spectra (DW-RS), Advanced Amplitude Centering (AAC), and Double Divisor of Ratio Difference Derivative (DDRD-D₁). In DW-RS and AAC two-wavelength manipulation was used for resolution, while in DDRD-D₁ only an appropriate wavelength for the synchronous quantification of the triplex commixture was used. All approaches can be able to resolve the highly interfering spectrum of the three components presented in the triplex commixture. Good linearity was inspected in the range of 20.0-100.0, 5.0-50.0, and 4.0-60.0 μg/mL for the ASA, SIC, and SA, respectively. All developed approaches have been advocated in accordance with ICH guidelines. All results from these approaches are presented and statistically reconciled with the proclaimed HPLC method, with no considerable differences. Furthermore, the approaches' eco-friendliness was predestined by Analytical Greenness (AGREE), and the complex GAPI. Moreover, the sustainability of the used solvent was evaluated by Green Solvents Selecting Tool (GSST); in addition, the greenness of the solvent was evaluated by Greenness Index tool with a spider diagram. The suggested UV-methods may be employed for routine quality control studies of the suggested formulations ASA & SIC since they were considered sustainable, economical, and effective.

Chromatographic analysis of ciprofloxacin and metronidazole in real human plasma: green analytical chemistry perspective

Background: Ciprofloxacin and metronidazole are beneficial for treating mixed aerobic/anaerobic infections. Methods: Following the oral administration of ciprofloxacin and metronidazole in healthy volunteers, TLC and HPLC methods were described for their analysis in plasma samples. In the first method, a stationary phase of silica gel TLC F254 plates was used using acetone/water/triethylamine/glacial acetic acid (8:2:0.25:0.1 v/v). The second approach used a C18 column and methanol/aqueous 0.05% triethylamine (25:75 v/v), with a flow rate of 1 ml/min and detection at 325 nm. Four green metrics were used to evaluate the approaches' environmental impact. Conclusion: The study provided the sensitivity required for determination of the two drugs in the collected samples. The findings showed that results were within permitted ranges with minimal environmental impact.

Green Antimicrobials as Therapeutic Agents for Diabetic Foot Ulcers

Diabetic foot ulcers (DFU) are one of the most serious and devastating complications of diabetes and account for a significant decrease in quality of life and costly healthcare expenses worldwide. This condition affects around 15% of diabetic patients and is one of the leading causes of lower limb amputations. DFUs generally present poor clinical outcomes, mainly due to the impaired healing process and the elevated risk of microbial infections which leads to tissue damage. Nowadays, antimicrobial resistance poses a rising threat to global health, thus hampering DFU treatment and care. Faced with this reality, it is pivotal to find greener and less environmentally impactful alternatives for fighting these resistant microbes. Antimicrobial peptides are small molecules that play a crucial role in the innate immune system of the host and can be found in nature. Some of these molecules have shown broad-spectrum antimicrobial properties and wound-healing activity, making them good potential therapeutic compounds to treat DFUs. This review aims to describe antimicrobial peptides derived from green, eco-friendly processes that can be used as potential therapeutic compounds to treat DFUs, thereby granting a better quality of life to patients and their families while protecting our fundamental bio-resources.

Multiple spectrophotometric determinations of Chlorthalidone and Cilnidipine using propylene carbonate - As a step towards greenness

Analyzing a drug based on its overlapping spectra requires the use of sophisticated equipment and more hazardous solvents, which is detrimental to ecological sustainability. There is a critical need to create a simple, unique, and cost-effective approach for detecting a mixture of compounds in a safer environment. The aim was to develop an eco-friendly, stability-indicating assay method to determine Chlorthalidone (CLD) and Cilnidipine (CIL) in bulk and tablet dosage form using four different Ultra-Violet (UV) spectrophotometric methods. The ratio difference method showed absorbance peaks at 256.01 nm, 220.87 nm, first ratio difference spectra at 267.21 nm, 288.03 nm, and second ratio difference spectra at 309.2 nm, 280.03 nm. The area under curve techniques showed an absorbance range of around 224-232 nm for CIL and 218-227 nm for CLD. Further, the spectral changes have been assessed at various conditions like acid, base, oxidation, and UV radiation, and it has been found that CLD tends to lose its spectral property by more than 45%. The method developed for two drugs has obeyed Beers law with the selected concentration range of 7-13 μg/mL for CLD and 8.75-16.25 μg/mL for CIL. The developed method was finally evaluated using four tools, and the results showed green pictographically representation in the GAPI and score near to 100 for AES and closer to 1 for AGREE indicated that the method was found to be most eco-friendly. The findings were easy to replicate, adoptive with major regulatory requirements, environmentally friendly, fast, and inexpensive to perform. This approach does not require any specific expensive equipment, and it might be inexpensive to use in the future to assess laboratory and commercial mixtures.

Chromatographic analysis of bromhexine and oxytetracycline residues in milk as a drug analysis medium with greenness profile appraisal

Tetracyclines are frequently employed in animal husbandry. Bromhexine is a mucolytic drug that improves the efficacy of tetracyclines. It has been reported that residues of tetracyclines in milk may have negative effects on humans. Two versatile and accurate methods were developed for concurrent analysis of oxytetracycline (OTC) and bromhexine (BR) residues in spiked milk samples. Sample preparation was carefully considered for extraction and cleanup using the ecofriendly chemicals acetic acid, 0.1 N EDTA and ethanol or methanol. The first method was a TLC-densitometric method in which TLC plates previously treated with 10% EDTA (pH 9 with 40% sodium hydroxide) were used as a stationary phase. A solvent mixture of methanol : methylene chloride : 2% aqueous acetic acid (8 : 2 : 0.5, by volume) was the developing system, and detection was carried out at 254 nm. Metformin was used as the internal standard, and linearity was achieved in the ranges of 0.2-10 and 0.04-2 μg per band for OTC and BR, respectively. The second method was a RP-HPLC method; separation was performed on a C18 column using an isocratic mixture of ethanol : 7.5% aqueous acetic acid (70 : 30, v/v). Separation was achieved within 10 minutes, and linearity was proven in the ranges of 0.05-50 and 0.05-30 μg mL^-1 for OTC and BR, respectively. Diclofenac sodium was used as an internal standard. The proposed methods were validated in accordance with the FDA Center for Veterinary Medicine guidelines. Moreover, the performance and health and environmental impacts of the methods were evaluated using several greenness metrics, namely, the National Environmental Methods Index (NEMI), modified NEMI, Green Analytical Procedure Index (GAPI), Analytical Eco-Scale and Analytical GREEnness (AGREE) metric approaches. All the obtained results proved the validity of the developed methods concerning its performance and ecological effects. The methods can be used to investigate the presence of OTC residues in various marketed milk samples to maintain public health.

Two New HPLC Methods, Assessed by GAPI, for Simultaneous Determination of Four Antipsychotics in Pharmaceutical Formulations: A Comparative Study

Antipsychotics are widely used to treat various mental disorders. Combination therapies were approved by the FDA to treat manic states. Quetiapine fumarate, aripiprazole, asenapine maleate, and chlorpromazine HCl are frequently used for treatment of these disorders. Green analytical chemistry is primarily concerned with reducing waste generated during sample preparation or analysis. Green solvents, such as ethanol, are being used in HPLC as an alternative to acetonitrile. To this purpose, two new chromatographic methods were developed to determine these four drugs simultaneously in their bulk and pharmaceutical formulations. The greenness of both methods was assessed by the green analytical procedure index (GAPI)—one of them was found to be green ecofriendly, and the other had some environmental hazards (conventional)—and this helps laboratories to choose a method that suits their capabilities. The chromatographic separation for both methods was carried out on a Thermo® C18 column. The total separation times were about 11 min and 9 min for the green and the conventional methods, respectively. Using the Student’s t-test and the F-ratio, there was no significant difference between the results of the two methods. These methods have been validated and successfully applied to the analysis of commercial pharmaceutical formulations. Our study could successfully be used in central quality control laboratories, which need a single analytical method to separate more than one compound with similar pharmacological action.

Analytical Eco-Scale for Evaluating the Uniqueness of Voltammetric Method used for Determination of Antiemetic Binary Mixture Containing Doxylamine Succinate in Presence of its Toxic Metabolite

Green analytical procedures are gaining popularity in the pharmaceutical research area as a way to reduce environmental impact and improve analyst health safety. The current work presents a green and sensitive electrochemical carbon paste electrode that has been chemically modified with zirconium dioxide and multi-walled carbon nanotubes for estimation of pyridoxine HCl (PYR) and doxylamine succinate (DOX) using the square wave voltammetric technique. Under optimum conditions, the linearity ranges were 20.00–2000.00 ng mL−1 and 2.00–20.00 µg mL−1 for both drugs in the 1st linear segment and 2nd linear segment, respectively. Stability testing assesses how the quality of a drug substance changes over time, depending on environmental and laboratory factors. DOX was found to undergo oxidative degradation when refluxed for 7 h using 30% H2O2 and the degraded product (DOX DEG) (toxic metabolite) was successfully characterized utilizing LC–MS. The developed electrode showed selectivity for the determination of binary mixture in pure form, pharmaceutical form, and in the presence of DOX DEG and common interfering molecules with good recovery. The proposed method was found to be eco-friendlier than the reported method in terms of the use of hazardous chemicals and solvents, energy consumption, and waste generation.

Graphical Abstract

Green Analytical Approach for the Determination of Zinc in Pharmaceutical Product Using Natural Reagent

A selective, sensitive, and environmentally safe spectrophotometry method was developed and validated for the determination of zinc in pharmaceutical substances using natural reagents obtained from the leaves of plant Acacia catechu. Different factors were optimized such as volume of reagent, selection of pH, and stability of the color complex. The drug showed a stable yellowish orange color complex at 550 nm. The greenness of the methods was estimated using an eco-scale tool where the presented method was found to be excellent green with an ecoscore of 84 based on spectrophotometric determination. Also, the greenness of the method was assessed by the Green Analytical Procedure Index and found to be eco-friendly. The method was validated in conformance with ICH guidelines, with acceptable values for linearity, accuracy, precision, LOD, and LOQ. The linearity range for zinc sulphate was 5-25 μg mL-1 with an R 2 value of 0.996. The % RSD for intraday precision and interday precision was less than 2%. The suggested method can be employed for the economic analysis of zinc in its pure form and various formulations. The presented spectrophotometric method is the first analytical method for the analysis of zinc present in zinc sulphate and showed greater ecoscale as compared to the official method.

Ultra-High-Performance Micellar Liquid Chromatography Comparing Tween 20 and Tween 40 for the Determination of Hydroxycinnamic Acids

A simple and green ultra-high-performance micellar liquid chromatography (MLC) method was developed here, comparing Tween 20 and Tween 40 for the first time as the only mobile phase modifiers with a C18 column. Its application to the separation of nine hydroxycinnamic acid (HCA) derivatives (cinnamic, caffeic, ferulic, sinapic, o-, m-, p-coumaric, 3,4-dihydroxyhydrocinnamic, and chlorogenic acids) was made, due to their importance as antioxidants in a variety of natural beverages such as wine and coffee. The optimal conditions of 45 °C temperature (T), 1% surfactant in the mobile phase, and pH control with 2.5 mM sulfuric acid were determined and used to elucidate the analytical figures of merit. Although the effect of these conditions was insignificant between the two surfactants, the nine-component HCA mixture was separated faster—in about 15 min—and with less peak tailing using Tween 20 than with Tween 40. The linearity of the Van’t Hoff (lnk versus 1/T) plots was evident for Tween 20, indicating a single retention mechanism—but less so for Tween 40. The equilibrium constants of the analytes with the micelles and the stationary phase were calculated. The developed method was successfully used to analyze organic red wine, spiked organic red wine, and green coffee diet pills. The percent recoveries of the nine HCA compounds spiked in the organic red wine ranged from 90% to 107%. The green coffee extract diet pills showed the presence of a significant amount of chlorogenic acid.

Quantitative Analysis of Abamectin, Albendazole, Levamisole HCl and Closantel in Q-DRENCH Oral Suspension Using a Stability-Indicating HPLC-DAD Method

Combination therapy of many anthelmintic drugs has been used to achieve fast animal curing. Q-DRENCH is an oral suspension, containing four different active drugs against GIT worms in sheep, commonly used in Australia and New Zeeland. The anti-parasitic drugs are Albendazole (ALB), Levamisole HCl (LEV), Abamectin (ABA), and Closantel (CLO). The main purpose of this study is to present a new simultaneous stability-indicting HPLC-DAD method for the analysis of the four drugs. The recommended liquid system was 1 mL of Triethylamine/L water, adjusting the pH to 3.5 by glacial acetic acid: acetonitrile solvent (20:80, v/v). Isocratic elusion achieved the desired results of separation at a 2 mL/min flow rate using Zorbax C-18 as a stationary phase. Detection was performed at 210 nm. The linearity ranges were 15.15 to 93.75 μg/mL for ALB, 25 to 150 μg/mL for LEV, 30 to 150 μg/mL for ABA, and 11.7 to 140.63 μg/mL for CLO. Moreover, the final greenness score was 0.62 using the AGREE tool, which reflects the eco-friendly nature. Moreover, the four drugs were determined successfully in the presence of their stressful degradation products. This work presents the first chromatographic method for simultaneous analysis for Q-DRENCH oral suspension drugs in the presence of their stressful degradation products.

Estimation of pitavastatin and ezetimibe using UPLC by a combined approach of analytical quality by design with green analytical technique

The current study explores a design and development of the simple, fast, green and selective novel method of UPLC to quantify pitavastatin and ezetimibe simultaneously. The combined approach of Green Analytical Method with Quality by Design-based risk assessment was done using the Ishikawa fishbone diagram followed by a rotatable central composite design used for the optimization. The optimal chromatographic separation was attained through a mobile phase of 72: 28% v/v ethanol and 0.1% orthophosphoric acid (pH 3.5), with a 0.31 mL min−1 flow rate. The developed UPLC-PDA method was sensitive and specific for pitavastatin and ezetimibe, with linearity ranging from 2 to 30, 10–150 μg mL−1 with an R2 of 0.9999 and 0.9997, respectively. The forced degradation study of stability-indicating assay results shows the degradation in respective stress conditions. The developed UPLC method was validated and found to have sensible results with good linearity, accuracy and precision. Further, the greenness was evaluated using five states of art metrics like NEMI, GAPI, AES, AMGS, and AGREE metrics and found the greenest results. Based on the results we concluded that the developed UPLC method could be efficient for the simultaneous determination of pitavastatin and ezetimibe in bulk and tablet dosage.