Adsorption characteristics of anionic surfactant onto laterite soil with differently charged surfaces and application for cationic dye removal

Design of cross-linked chitosan-adipic acid/Al2O3 nanoparticles for highly efficient removal of bromothymol blue dye: Physicochemical properties, isotherms, and adsorption kinetics

In the present work, an eco-friendly cross-linked chitosan-adipic acid/Al2O3 nanoparticles (CTS-ADP/Al2O3) nanocomposite was designed for the highly efficient removal of bromothymol blue (BTB) dye from an aquatic medium. Several analytical approaches including Zeta potential, BET, XRD, FTIR, pHpzc, and FESEM-EDX were adopted to investigate the CTS-ADP/Al2O3's physicochemical properties. The response surface methodology approach was used to conduct a comprehensive study on the capability of CTS-ADP/Al2O3 to remove BTB dye. This research took into account the factors that impact adsorption, including the CTS-ADP/Al2O3 dosage (0.02-0.08 g), the duration (10-50 min), and the pH (4-10). The BTB equilibrium data fitted well with the Freundlich isotherm. A reasonable agreement of the kinetics data of BTB adsorption by CTS-ADP/Al2O3 was provided using a pseudo-first-order model. The adsorption capability of CTS-ADP/Al2O3 was outstanding (527.3 mg/g). It is possible to attribute the effective adsorption of BTB on the positively charged CTS-ADP/Al2O3 to the electrostatic attraction between the BTB anions and the positively charged CTS-ADP/Al2O3, as well as to n-π, and H-bond interactions. This work reveals that CTS-ADP/Al2O3 has a surprising potential as an effective bio-adsorbent to treat industrial wastewater.

Impact of pH on sodium caseinate binding and structural changes on montmorillonite surface

The immobilization of proteins onto clay surfaces has proven beneficial for pharmaceutical and environmental applications. This study examines the adsorption of sodium caseinate (Cas), an amphiphilic protein widely used in pharmaceutical formulations, onto sodium montmorillonite (Mt). Adsorption isotherms and kinetics were examined at two pHs, above and below Cas isoelectric point (IEP). Dynamic light scattering (DLS), zeta potential, Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Diffraction (XRD) were used to characterize the complexes formed. Results showed that at pH 3, Cas reversed Mt surface charge from negative to positive due to electrostatic attraction, intercalating into the basal spacing. At pH 7, despite repulsion expected, different mechanisms occurred, including protein orientation on the external surface and Cas self-assembly on Mt, increasing the negative zeta potential. Fluorescence quenching and isothermal titration calorimetry (ITC) revealed binding parameters and thermodynamic interactions, identifying electrostatic, hydrogen, and hydrophobic forces at both pH levels. This study contributes to understanding protein immobilization mechanisms and key factors affecting protein-clay adsorption.

Enhancing lead extraction efficiency from contaminated soil: A synergistic approach combining biodegradable chelators and surfactants

Lead (Pb), a persistent and bio-accumulative contaminant, poses threats to the environment and human health. The effective removal of Pb from contaminated soil proves challenging due to its tendency to form stable complexes with soil components. Chelators have been extensively studied for their ability to extract metal contaminants, including Pb, from soil environment. However, the prolonged environmental persistence of traditional chelators and the high cost of biodegradable alternatives have hindered their practical application in remediation efforts. This study investigated a novel synergistic approach that combined a biodegradable chelator, [S,S]-ethylenediamine succinic acid (EDDS), with cationic and anionic surfactants to enhance Pb extraction efficiency. The study revealed that cationic surfactants, such as cetylpyridinium chloride (CPC) and cetyltrimethylammonium bromide (CTAB), significantly enhanced Pb extraction efficiency when combined with EDDS, whereas anionic surfactants, like sodium N-dodecanoyl-taurinate (SDT) and sodium dodecyl sulfate (SDS), inhibited the extraction process. Specifically, blending 5 mmol L-1 EDDS with 20 mmol L-1 CPC resulted in a 72.6% enhancement in Pb extraction efficiency. The proposed synergistic strategy offers a promising avenue for soil remediation, mitigating Pb contamination while preserving essential soil minerals. By addressing chelator limitations and improving efficiency, this approach presents a viable solution for enhancing soil remediation practices.

Surfactant-enhanced anoxic degradation of polycyclic aromatic hydrocarbons (PAHs) in aged subsurface soil at high temperature (60 °C)

Thermally enhanced anoxic biodegradation is emerging as a promising method for removing PAHs from subsurface soil. However, some PAHs still remain in soil following remediation with thermally enhanced anoxic degradation due to low bioavailability of these residual PAHs. The effects of five surfactants (Tween 80, TX 100, Brij 30, SDS, and SDBS) on the desorption of PAHs, anoxic degradation of PAHs, and native bacteria in soil at high temperature (60 °C) were evaluated in this study. The desorption of PAHs in soil increased as surfactant concentration increased. Low doses of surfactants (0.08%, w/w) enhanced the growth of potential PAHs degrading bacteria and promoted the anoxic degradation of PAHs, whereas high doses of surfactants (0.3%-0.8%, w/w) displayed the opposite effect, and the degree of inhibition increased with increasing surfactant concentration. The results also indicated that the inhibitory effect of anionic surfactants (SDS and SDBS) on microbial growth and PAHs degradation is stronger than that of nonionic surfactants (Tween 80, TX 100 and Brij 30) at the same concentration. These results suggest a feasible way of enhancing the anoxic degradation of PAHs in soil where heat cannot be effectively utilized when in situ thermal desorption (ISTD) technology is used.

Surfactants in water and wastewater (greywater): Environmental toxicity and treatment options

Surfactant, an emerging pollutant present in greywater, raises the toxicity levels in the water body. Soap, detergent, and personal care items add surfactant to greywater. Due to excessive washing and cleaning procedures brought on by the COVID-19 pandemic, the release of surfactants in greywater has also increased. Considering the environmental toxicity and problems it creates during the treatment, it's essential to remove surfactants from the wastewater. This review intends to explain and address the environmental toxicity of the surfactant released via greywater and current techniques for surfactant removal from wastewater. Various physical, chemical, and biological methods are reported. Modern adsorbents such as hydrophilic silica nanoparticles, chitosan, fly ash, and iron oxide remove surfactants by adsorption. Membrane filtration effectively removes surfactants but is not cost-effective. Coagulants (chemical and natural coagulants) neutralize surfactant charges and help remove them as bigger particles. Electrocoagulation/electroflotation causes surfactants to coagulate and float. Microorganisms break down surfactants in microbial fuel cells to generate power. Surfactants are removed by natural processes and plants in constructed wetlands where traditional aerobic and anaerobic approaches use microbes to break down surfactants. Constructed wetlands, natural coagulation-flocculation, and microbial fuel cells are environmentally beneficial methods to remove surfactants from wastewater.

Efficient and recyclable degradation of organic dye pollutants by CeO2@ZIF-8 nanozyme-based non-photocatalytic system

Advanced oxidation processes-based catalysis system as the most typical pollutant degradation technology always suffer from poor durability and photo-dependent. Inspired by the fact that some nanomaterials exhibit catalytic properties closer to natural enzymes, a high peroxidase-like activity and stability CeO₂@ZIF-8 nanozyme was synthesized in this study for non-photodegradation of dyes pollution. Multiple characterization techniques were applied to prove the successful synthesis of the nanozyme. The influence of different parameters on the catalytic degradation of organic dye by nanozyme was investigated. This nanozyme achieved a maximum degradation efficiency of 99.81% for methyl orange and maintained its catalytic performance in repeated experiments. Possible degradation intermediates and pathways for methyl orange were then proposed. In addition, the CeO₂@ZIF-8 loaded starch/agarose films were prepared for the portable and recyclable remediation of real dye wastewater, which maintained more than 80% degradation efficiency after 5 successive cycles. These results suggested that nanozyme based non-photocatalytic system is a potential catalyst for dye degradation and it opens a new avenue to develop high-performance and recyclable catalysts for pollutant remediation.

Adsorption performance and mechanism of cationic and anionic dyes by KOH activated biochar derived from medical waste pyrolysis

The massive generation of medical waste (MW) results in a series of environmental, social, and ecological problems. Pyrolysis is one such approach that has attracted more attention because of the production of value-added products with lesser environmental risk. In this study, the activated biochar (ABC600) was obtained from MW pyrolysis and activated with KOH. The adsorption mechanism of activated biochar on cationic (methylene blue) and anionic (reactive yellow) dyes were studied. The physicochemical characterization of biochar showed that increasing pyrolysis temperature and KOH activation resulted in increased surface area, a rough surface with a clear porous structure, and sufficient functional groups. MB and RYD-145 adsorption on ABC600 was more consistent with Langmuir isotherm (R² ≥ 0.996) and pseudo-second-order kinetics (R² ≥ 0.998), indicating chemisorption with monolayer characteristics. The Langmuir model fitting demonstrated that MB and RYD-145 had maximum uptake capacities of 922.2 and 343.4 mg⋅g^-1. The thermodynamics study of both dyes showed a positive change in enthalpy (ΔH°) and entropy (ΔS°), revealing the endothermic adsorption behavior and randomness in dye molecule arrangement on activated-biochar/solution surface. The activated biochar has excellent adsorption potential for cationic and anionic dyes; hence, it can be considered an economical and efficient adsorbent.

Peroxymonosulfate activation through ferromagnetic bimetallic spinel sulfide composite (Fe3O4/NiCo2S4) for organic pollutant degradation

Spinel sulfides are a good candidate as heterogeneous catalysts for wastewater treatment through peroxymonosulfate (PMS) activation. In this paper, magnetic Fe₃O₄/NiCo₂S₄ composite was successfully synthesized by hydrothermal method. Catalyst screening displayed that the composite catalyst with a Fe₃O₄:NiCo₂S₄ molar ratio of 1:3 (i.e.,0.33-Fe₃O₄/NiCo₂S₄) is the most optimal. The results showed that 0.33-Fe₃O₄/NiCo₂S₄ composite catalyst had superior catalytic activity, achieving 99.8%,65.1% and 40.7% of RhB, COD and TOC removals within 30 min with 180 m g/L PMS and 75 mg/L catalyst. We proposed a potential catalytic mechanism of PMS activation by Fe₃O₄/NiCo₂S₄ in two aspects. On the one hand, sulfur species such as S^2- and S₂^2- enhance the Co³⁺/Co²⁺, Ni³⁺/Ni²⁺ and Fe³⁺/Fe²⁺ cycles on Fe₃O₄/NiCo₂S₄ surface. On the other hand, there is the synergistic effect of Co³⁺/Co²⁺, Ni³⁺/Ni²⁺ and Fe³⁺/Fe²⁺ cycles in activating PMS. Overall, owing to its excellent catalytic activity, reusability, and easy recovery, Fe₃O₄/NiCo₂S₄ is a potentially useful catalyst for remediation of contaminated water.

Low-cost treated lignocellulosic biomass waste supported with FeCl3/Zn(NO3)2 for water decolorization

Dye pollution has always been a serious concern globally, threatening the lives of humans and the ecosystem. In the current study, treated lignocellulosic biomass waste supported with FeCl₃/Zn(NO₃)₂ was utilized as an effective composite for removing Reactive Orange 16 (RO16). SEM/EDAX, FTIR, and XRD analyses exhibited that the prepared material was successfully synthesized. The removal efficiency of 99.1% was found at an equilibrium time of 110 min and dye concentration of 5 mg L^-1 Adsorbent mass of 30 mg resulted in the maximum dye elimination, and the efficiency of the process decreased by increasing the temperature from 25 to 40 °C. The effect of pH revealed that optimum pH was occurred at acidic media, having the maximum dye removal of greater than 90%. The kinetic and isotherm models revealed that RO16 elimination followed pseudo-second-order (R² = 0.9982) and Freundlich (R² = 0.9758) assumptions. Surprisingly, the performance of modified sawdust was 15.5 times better than the raw sawdust for the dye removal. In conclusion, lignocellulosic sawdust-Fe/Zn composite is promising for dye removal.

Synthesis and application of AuNi@AC nano adsorbents for the removal of Maxilon Blue 5G azo dye from aquatic mediums

In this research, gold-nicel supported on activated carbon (AC) nanoadsorbent (AuNi@AC) synthesized by following a series of physicochemical procedures was prepared for the removal of Maxilon Blue 5G (MB) which is a cationic textile dye. Experimental studies based on parameters specifically pH, contact time, nano catalytic adsorbent particle, initial MB dye concentration and temperature effect were conducted in aqueous solutions in a batch system. AuNi@AC nanoadsorbents (NAs) reached the equilibrium in 30 min under optimum conditions in adsorption of the dye. The pseudo-first, second-order, and intra-particle diffusion models were tested to evaluate a the experimental results. Adsorption kinetics were found to be represented by the pseudo-second-order model, and the maximum adsorption capacity (q_max.) was calculated to be 542.90 mg/g (or 2.041 mmol/g). The synthesized magnetic AuNi@AC nanoadsorbent showed a high-efficiency reusability effect of about 64% after five reuse runs. Also, thermodynamic function parameters such as activation energy (Ea), Gibbs free energy (ΔG *), and entropy (ΔS *) were investigated in the sorption study. After all evaluation of data, it was concluded that the novel AuNi@AC nanoadsorbent could be considered as an effective support material for the removal of various organic pollutants in aquation solution especially for the removal of MB.

Removal of beta-lactam antibiotic in water environment by adsorption technique using cationic surfactant functionalized nanosilica rice husk

This study aims to investigate the adsorption characteristics of cationic surfactant, cetyltrimethylamonium bromide (CTAB) onto negatively nanosilica rice husk surface and the application for antibiotic treatment in water environment. Adsorption of CTAB onto nanosilica increased with an increase of solution pH, due to an enhancement of the electrostatic attraction between cationic methylamomethylamonium groups and negatively charged nanosilica surface enhanced at higher pH. Adsorption of CTAB decreased with a decrease of ionic strength while a common intersection point (CIP) was observed for adsorption isotherm at different ionic strengths, suggesting that hydrophobic interactions between alkyl chains in CTAB molecules significantly induced adsorption and admicelles with bilayer formation were dominant than monolayer of hemimicelles. The CTAB functionalized nanosilica (CFNS) was applied for removal of beta-lactam amoxicillin (AMX). The best conditions for AMX treatment using CFNS were selected as pH 10, contact time 60 min and CFNS dosage 10 mg/mL. Removal efficiency of AMX using CFNS reached to 100% under optimum conditions while it was only 25.01% using nanosilica without CTAB. The maximum AMX adsorption capacity using CFNS of about 25 mg/g was much higher than other adsorbents. The effects of different organics such as humic acid, anionic surfactant, and other antibiotics on AMX removal using CFNS were also studied. A two-step model can fit CTAB uptake isotherms onto nanosilica and AMX onto CFNS well at different KCl concentrations. Based on the desorption of CTAB with AMX adsorption as well as adsorption isotherms, the change in surface charge and functional vibration groups after adsorption, we indicate that AMX adsorption onto CFNS was mainly controlled by electrostatic interaction. We reveal that CFNS is an excellent adsorbent for antibiotic treatment from aqueous solution.

Heat and ZnCl2 chemical carbonization of date stone as an adsorbent: optimization of material fabrication parameters and adsorption studies

In the present study, the optimization of factors for the fabrication of highly adsorptive activated carbon from agricultural waste (date stone) was investigated by using ZnCl₂ as a chemical agent during the heat treatment. ZnCl₂ acts as a dehydration agent during the heat treatment, allowing a better porosity. In addition, it boosts the fragmentation of the lignocellulosic structure and the condensation of carbon rings. The findings of this investigation showed that the synthesis conditions for better ZnCl₂ chemical/heat carbonization to fabricate an adsorbent from date stone are 700 °C, 120 min, and 2.0 g/g. The characterization analysis showed that the as-prepared activated carbon exhibits a surface area of 1036 m²/g, an iodine number of 928.5 mg/g, and phenol number of 2.1 mmol/g, which are comparable to commercial activated carbons. Batch sorption tests to remove methylene blue (MB) from water showed a maximum adsorption capacity of 384.6 mg/g using the prepared activated carbon. Equilibrium data was best fitted by the Langmuir isotherm model. It was found also that the kinetic adsorption data obeyed the pseudo-first order, and both external diffusion and intra-particle diffusion control the adsorption. Based on the obtained results, the optimization of synthesis conditions may help the transfer of technology in terms of agriculture-based material valorization towards the environmental remediation.

Waste-to-Resource: New application of modified mine silicate waste to remove Pb2+ ion and methylene blue dye, adsorption properties, mechanism of action and recycling

Currently, heavy metals and dyes are some of the most critical pollutants in the aquatic environment. So, in this paper "waste-to-resource conversion", as a new application of modified mine silicate waste to remove Pb²⁺ ion and methylene blue (MB) dye, adsorption properties, mechanism of action and recycling were studied. Silicate wastes are located in the alteration zone and the margin of molybdenum ore, these wastes are under the influence of hydrothermal solutions which are impregnated with iron and manganese ions. Hence, acid and base modifications have been commonly used. So, in this study, a highly porous nanostructure of modified silicate waste was used to remove MB and Pb²⁺ ion, in subsequent to our previous study on the application of the raw material of the same in the removal of malachite green. Acid, base, and acid/base treatments were used to activate and modify the adsorbent. Results show a significantly higher potential of modified adsorbent in the removal of MB and Pb²⁺ compared to the raw material. According to the isotherm and kinetic studies for MB and Pb²⁺ the Langmuir and Temkin and pseudo-second-order models were investigated with experimental data. Modified nanomaterial was used for several adsorption and desorption processes, without a significant decrease in the capability of the adsorbent in the removal of MB and Pb²⁺ pollutants. Leached iron and manganese ions (as production of modification) are deposited in the form of sludge using a simple pH adjustment and precipitation process and can be used to recover iron and manganese metals in the long run. The comparison of monolayer adsorption capacity using for Pb²⁺ ion and MB dye are as ((untreated SW: 29.41, 1.05); (NaOH treated: 21.74, 100); (Nitric Acid treated: 16.67, 142.86); (Citric Acid treated: 40, 125); (Nitric/Citric Acids treated: 15.63, 111.11) and (Nitric/Citric Acids/NaOH treated: 15.15, 83.33)), respectively. Higher adsorption capacity and re-generable properties of this adsorbent suggest the usage of this natural and abundant mine waste to treat wastewater containing toxic elements and dyes.

Biochar Adsorbents for Arsenic Removal from Water Environment: A Review

Arsenic intake can cause human health disorders to the lungs, urinary tract, kidney, liver, hyper-pigmentation, muscles, neurological and even cancer. Biochar is potent, economical and ecologically sound adsorbents for water purification. After surface modifications, adsorption capacity of biochar significantly increased due to high porosity and reactivity. Adsorption capacities of the biochar derived from the municipal solid waste and KOH mixed municipal solid waste were increased from 24.49 and 30.98 mg/g for arsenic adsorption. Complex formation, electrostatic behavior and ion exchange are important mechanisms for arsenic adsorption. Organic arsenic removal using biochar is a major challenge. Hence, more innovative research should be conducted to achieve one of the 17 sustainable development goals of the United Nations i.e. "providing safe drinking water for all". This review is focused on the arsenic removal from water using pristine and modified biochar adsorbents. Recent advances in production methods of biochar adsorbents and mechanisms of arsenic removal from water are also illustrated.

Industrial lignins: the potential for efficient removal of Cr(VI) from wastewater

Cr(VI), a serious threat to human health, widely exists in the effluents of various industrial processes. In this paper, the potential of industrial lignin for efficient removal of Cr(VI) from wastewater was systematically investigated, including pulping black liquor lignin (BLN), enzymolysis lignin (ELN), and SPORL pretreatment spent liquor (FS). The structure characterizations of three lignins were investigated by thermogravimetry (TG), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurement, scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). Among these three lignins, BLN showed the highest adsorption amount of Cr(VI) and good selectivity in wastewater simulation. According to the Langmuir model, the calculated maximum adsorption amount of Cr(VI) on ELN, BLN, and FS was 801.57, 864.30, and 642.26 mg g^-1, respectively. The adsorption of Cr(VI) by industrial lignins was a chemisorption process, during which Cr(VI) was reduced to low-toxic Cr(III). This paper provided a promising application for the effective utilization of industrial lignins.

Adsorptive Removal of Anionic Azo Dye New Coccine Using Silica and Silica-gel with Surface Modification by Polycation

In the present work, adsorption of anionic azo dye, new coccine (NCC) on silica and silica-gel in an aquatic environment was discovered. Effective conditions such as adsorption time, pH, the influence of dosage on NCC adsorption using strong polycation, poly-diallyl-dimethylammonium chloride (PDADMAC) modified silica (PMS) and PDADMAC modified silica-gel (PMSG) were systematically studied. The removal of NCC using PMS and PMSG were much higher than that using raw silica and silica-gel without PDADMAC in all pH ranges from 3 to 10. The adsorption of NCC onto PMS and PMSG was achieved maxima at the same conditions of contact time 30 min, pH 6. The optimum adsorbent dosages of PMS and PMSG for NCC removal were 10 and 20 mg·mL-1, respectively. Experimental results of NCC adsorption isotherms onto PMS and PMSG at different ionic strength were fitted by Langmuir and Freundlich models. The NCC removal efficiencies using PMS and PMSG were higher than 87%, indicating that PMS and PMSG are novel and reusable adsorbents for removal of anionic dye. Based on adsorption isotherms, and surface group changes after PDADMAC modification and NCC adsorption examined by Fourier transform infrared spectroscopy (FTIR), we demonstrate that electrostatic interaction between positively charged adsorbents' surfaces and negative sulfonic groups of NCC are the main driving force for anionic azo dye adsorption onto PMS and PMGS adsorbents.

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

A novel core-shell magnetic Prussian blue-coated Fe3O4 composites (Fe3O4@PB) were designed and synthesized by in-situ replication and controlled etching of iron oxide (Fe3O4) to eliminate Cd (II) from micro-polluted water. The core-shell structure was confirmed by TEM, and the composites were characterized by XRD and FTIR. The pore diameter distribution from BET measurement revealed the micropore-dominated structure of Fe3O4@PB. The effects of adsorbents dosage, pH, and co-existing ions were investigated. Batch results revealed that the Cd (II) adsorption was very fast initially and reached equilibrium after 4 h. A pH of 6 was favorable for Cd (II) adsorption on Fe3O4@PB. The adsorption rate reached 98.78% at an initial Cd (II) concentration of 100 μg/L. The adsorption kinetics indicated that the pseudo-first-order and Elovich models could best describe the Cd (II) adsorption onto Fe3O4@PB, indicating that the sorption of Cd (II) ions on the binding sites of Fe3O4@PB was the main rate-limiting step of adsorption. The adsorption isotherm well fitted the Freundlich model with a maximum capacity of 9.25 mg·g-1 of Cd (II). The adsorption of Cd (II) on the Fe3O4@PB was affected by co-existing ions, including Cu (II), Ni (II), and Zn (II), due to the competitive effect of the co-adsorption of Cd (II) with other co-existing ions.

Preparation of Sodium Lignosulfonate/Chitosan Adsorbent and Application of Pb2+ Treatment in Water

Industrial wastewater has brought huge disasters to water resources and soil and has seriously affected the growth of animals and plants. There is an urgent need for a green and efficient adsorbent to solve the problem of water pollution. Sodium lignosulfonate and chitosan undergo free radical polymerization to form a lignin/chitosan adsorbent, which is used to treat Pb2+ in water pollution. An orthogonal experiment was used to optimize the content of sodium lignosulfonate, chitosan, cross-linking agent and initiator to obtain the adsorbent with the best adsorption performance. The adsorbents were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermal analysis and zeta potentiometry. The influence of different conditions on the adsorption of heavy metal ions by lignosulfonate/chitosan adsorbent was explored, and a kinetic and isotherm model was established. The results showed that the adsorption capacity of Pb2+ was 345 mg g−1 when the adsorbent was 0.01 g, the concentration of heavy metal ions was 100 mg L−1 and pH was 7. The adsorption process of lignosulfonate/chitosan is a kind of spontaneous adsorption mode, which is mainly composed of electrostatic adsorption and chemical adsorption.

Occurrence, fate and removal of SARS-CoV-2 in wastewater: Current knowledge and future perspectives

The coronavirus disease 2019 (COVID-19), a pandemic of global concern, is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Recently, many studies have documented the detection of SARS-CoV-2 in human excreta and wastewater. The presence of SARS-CoV-2 in human excreta and wastewater poses serious implications for wastewater treatment. Thus, this review aims to understand the fate of SARS-CoV-2 in the urban water cycle and its inactivation in different stages of treatment in wastewater treatment plants (WWTPs) for effective control to prevent any recurrence of the outbreak. The viral load of SARS-CoV-2 in feces of individuals tested positive has been reported to be in the range of 104-108 copies/L depending on the infection stages. In the wastewater, dilution of feces results in the decrease of the viral load in the range of 102-106.5 copies/L. Monitoring of SARS-CoV-2 in WWTP samples following the wastewater-based epidemiology (WBE) can complement real epidemiological data from clinical testing to help to monitor disease outbreaks in a community. Though promising, high uncertainty involved with the WBE technique warrants further research for reliable and quantitative information. Inactivation of SARS-CoV-2 in WWTPs depends on the operational parameters and is generally enhanced by the tertiary treatment and disinfection techniques with a higher dosage. However, the risk of SARS-CoV-2 dissemination by the treated effluent intended to be disposed of or reused in the urban water cycle needs to be assessed with respect to the extent of viral infectivity.

A state-of-the-art review on wastewater treatment techniques: the effectiveness of adsorption method

The world's water supplies have been contaminated due to large effluents containing toxic pollutants such as dyes, heavy metals, surfactants, personal care products, pesticides, and pharmaceuticals from agricultural, industrial, and municipal resources into water streams. Water contamination and its treatment have emerged out as an escalating challenge globally. Extraordinary efforts have been made to overcome the challenges of wastewater treatment in recent years. Various techniques such as chemical methods like Fenton oxidation and electrochemical oxidation, physical procedures like adsorption and membrane filtration, and several biological techniques have been recognized for the treatment of wastewater. This review communicates insights into recent research developments in different treatment techniques and their applications to eradicate various water contaminants. Research gaps have also been identified regarding multiple strategies for understanding key aspects that are important to pilot-scale or large-scale systems. Based on this review, it can be determined that adsorption is a simple, sustainable, cost-effective, and environmental-friendly technique for wastewater treatment, among all other existing technologies. However, there is a need for further research and development, optimization, and practical implementation of the integrated process for a wide range of applications.

Efficiency of Arsenic and Iron Removal Plants (AIRPs) for Groundwater Treatment in Rural Areas of Southwest Bangladesh

Arsenic (As) removal plants were installed in As-endemic areas of Bangladesh to remove As from well water. In many cases, these removal plants did not perform satisfactorily. This study evaluated the efficiency of 20 As and iron (Fe) removal plants (AIRPs) during pre- and post-monsoon conditions in rural Bangladesh. Results revealed that As removal efficiencies ranged from 67% to 98% and 74 to 93% during the pre- and post-monsoons periods, respectively. In the post-monsoon season As removal at individual AIRP sites was on average (4.01%) greater than in the pre-monsoon season. However, two removal plants were unable to remove As below 50 µg L−1 (Bangladesh drinking water standard) during pre-monsoon, while 11 samples out of 20 were unable to remove As below the WHO provisional guideline value of 10 µg L−1. During post-monsoon, none of the samples exceeded 50 µg L−1, but eight of them exceeded 10 µg L−1. The Fe removal efficiencies of AIRPs were evident in more than 80% samples. Although As removal efficiency was found to be substantial, a cancer risk assessment indicates that hazard quotient (HQ) and carcinogenic risk (CR) of As in treated water for adults and children are above the threshold limits. Thus, additional reductions of As concentrations in treated water are needed to further reduce the excess cancer risk due to As in drinking water. Since 55% and 40% of the AIRPs were unable to remove As < 10 µg L−1 during pre-monsoon and post-monsoon, further improvement including changes in AIRP design, regular cleaning of sludge, and periodic monitoring of water quality are suggested. Future research is needed to determine whether these modifications improve the performance of AIRPs.

Removal of Tetracycline from Aqueous Solution Using Nanocomposite Based on Polyanion-Modified Laterite Material

This work investigated the removal of antibiotic tetracycline (TC) from wastewater using nanocomposite material based on laterite modified with polyanion, polystyrene sulfonate (PSS). The effective factors influenced on the TC removal using nanocomposite PSS-modified laterite (NCPML) were optimized and found to be pH 4, solid-liquid ratio 5 mg/mL, and contact time 180 min. The highest removal of TC reached about 88% under the optimum adsorption conditions. The adsorption isotherm and kinetics of TC adsorption onto NCPML were in good agreement with the Langmuir and pseudo-second-order models, respectively. The characteristics of the NCPML material before and after TC adsorption were examined by zeta (ζ) potential measurements, Brunauer-Emmett-Teller (BET) method, and Fourier transform infrared spectroscopy (FT-IR). The TC adsorption onto NCPML was induced by electrostatic interaction, hydrogen bonding, and diffusion interaction. The TC removal from wastewater was approximately 94% while efficiency still reached 66% after five regenerations. Our research reveals that NCPML is a high-performance adsorbent for TC removal from wastewater.

Adsorptive Removal of Rhodamine B Using Novel Adsorbent-Based Surfactant-Modified Alpha Alumina Nanoparticles

The objective of the present study is to investigate removal of cationic dye, rhodamine B (RhB), in water environment using a high-performance absorbent based on metal oxide nanomaterials toward green chemistry. The adsorption of sodium dodecyl sulfate (SDS) onto synthesized alpha alumina (α-Al₂O₃) material (M0) at different ionic strengths under low pH was studied to fabricate a new adsorbent as SDS-modified α-Al₂O₃ material (M1). The RhB removal using M1 was much higher than M0 under the same experimental conditions. The optimal conditions for RhB removal using M1 were found to be contact time 30 min, pH 4, and adsorbent dosage 5 mg/mL. The maximum RhB removal using M1 achieved 100%, and adsorption amount reached 52.0 mg/g. Adsorption isotherms of RhB onto M1 were well fitted by the two-step adsorption model. The electrostatic attraction between positive RhB molecules and negatively charged M1 surface controlled the adsorption that was evaluated by the surface charge change with zeta potential and adsorption isotherms. Very high RhB removal of greater than 98% after four regenerations of M1 and the maximum removal for all actual textile wastewater samples demonstrate that SDS-modified nano α-Al₂O₃ is a high-performance and reusable material for RhB removal from wastewater.

Investigation of Surfactant-Polymer Interactions Using Rheology and Surface Tension Measurements

The interactions between surfactants and a drag-reducing polymer were investigated at a low polymer concentration of 500 ppm, using measurements of the rheology and surface activity of surfactant-polymer solutions. A well-known drag-reducing polymer (anionic sodium carboxymethyl cellulose) and five different surfactants (two anionic, two non-ionic, and one zwitterionic) were selected for the interaction studies. The surfactant-polymer solutions were shear thinning in nature, and they followed the power law model. The interaction between the surfactant and polymer had a strong effect on the consistency index of the solution and a marginal effect on the flow behavior index. The surface tension versus surfactant concentration plots were interpreted in terms of the interactions between surfactant and polymer. The critical aggregation concentration (CAC) of the surfactant was estimated based on the surface tension and rheological data. The CAC values of the same charge surfactants as that of the polymer were found to be significantly higher than other combinations of surfactant and polymer, such as non-ionic surfactant/anionic polymer, and zwitterionic surfactant/anionic polymer.

Nonionic and anionic surfactant-washing of polycyclic aromatic hydrocarbons in estuarine sediments around an industrial harbor in southern Taiwan

Various surfactants, such as nonionic Triton X-100 and Simple Green™ (SG), and anionic sodium dodecylsulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS) were utilized to remove polycyclic aromatic hydrocarbons (PAHs) from heavily contaminated harbor sediments dredged from Kaohsiung Harbor in Taiwan. Desorption/re-sorption equilibrium, kinetics, and washability of PAHs using the selected surfactant were evaluated under different critical micelle concentrations (CMC). Experimental results revealed that the desorption rate of high molecular weight PAHs was greater than those of low molecular weight PAHs, and the anionic SDS was relatively effective in the removal of total PAHs (>50%) compared to the other surfactants. The correlation between the effectiveness of the surfactant washing processes and the physicochemical properties of individual PAH was statistically analyzed. The resulting data suggested that hydrophobic factors (K_ow, K_oc and S_w) affected PAH treatability more than the reactivity of PAH (electron affinity and ionization potential). Since the adsorption of anionic surfactant altered the hydrophobicity of organic matter in the sediment, PAHs preferred transferring from the sediment to the hydrophobic core of micelles in aqueous solution. Nevertheless, the nonionic surfactant enhanced the PAH partition in the aqueous phase, thus increasing the micellar solubilization of PAH.

Kinetic Studies on the Catalytic Degradation of Rhodamine B by Hydrogen Peroxide: Effect of Surfactant Coated and Non-Coated Iron (III) Oxide Nanoparticles

Iron (III) oxide (Fe₃O₄) and sodium dodecyl sulfate (SDS) coated iron (III) oxide (SDS@Fe₃O₄) nanoparticles (NPs) were synthesized by the co-precipitation method for application in the catalytic degradation of Rhodamine B (RB) dye. The synthesized NPs were characterized using X-ray diffractometer (XRD), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infra-red (FT-IR) spectroscopy techniques and tested in the removal of RB. A kinetic study on RB degradation by hydrogen peroxide (H₂O₂) was carried out and the influence of Fe₃O₄ and SDS@Fe₃O₄ magnetic NPs on the degradation rate was assessed. The activity of magnetic NPs, viz. Fe₃O₄ and SDS@Fe₃O₄, in the degradation of RB was spectrophotometrically studied and found effective in the removal of RB dye from water. The rate of RB degradation was found linearly dependent upon H₂O₂ concentration and within 5.0 × 10^-2 to 4.0 × 10^-1 M H₂O₂, the observed pseudo-first-order kinetic rates (k_obs, s^-1) for the degradation of RB (10 mg L^-1) at pH 3 and temperature 25 ± 2 °C were between 0.4 and 1.7 × 10⁴ s^-1, while in presence of 0.1% w/v Fe₃O₄ or SDS@Fe₃O₄ NPs, k_obs were between 1.3 and 2.8 × 10⁴ s^-1 and between 2.6 and 4.8 × 10⁴ s^-1, respectively. Furthermore, in presence of Fe₃O₄ or SDS@Fe₃O₄, k_obs increased with NPs dosage and showed a peaked pH behavior with a maximum at pH 3. The magnitude of thermodynamic parameters E_a and ΔH for RB degradation in presence of SDS@Fe₃O₄ were 15.63 kJ mol^-1 and 13.01 kJ mol^-1, respectively, lowest among the used catalysts, confirming its effectiveness during degradation. Furthermore, SDS in the presence of Fe₃O₄ NPs and H₂O₂ remarkably enhanced the rate of RB degradation.

Separation and determination of alkyl sulfate surfactants in wastewater by capillary electrophoresis coupled with contactless conductivity detection after preconcentration by simultaneous adsorption using alumina beads

The aim of the present study is to determine four anionic alkyl sulfate (AS) surfactants with different alkyl chains, namely, C8, C10, C12, and C14, in wastewater by CE with capacitively coupled contactless conductivity detection (CE-C⁴ D). The conditions effective for the separation of the four AS surfactants were systematically optimized and found to be in a Tris-His (50 mM/20 mM) BGE solution at a pH of 8.95, using a separation voltage of +15 kV, hydrodynamic injection by siphoning using a 20 cm injection height and an injection time of 20 s. The LODs for C8, C10, C12, and C14 were 2.58, 2.30, 2.08, and 3.16 mg/L, respectively. The conditions used to achieve the simultaneous adsorption and preconcentration of the AS surfactants using Al₂ O₃ beads were pH of 3 and 0.1 mM NaCl. The adsorption efficiencies were found to be 45.6, 50.8, 81.7, and 99.9%, while the desorption efficiencies reached 66.1, 70.4, 83.9, and 100.0% for C8, C10, C12, and C14, respectively. The concentrations of the AS surfactants in wastewater samples were quantified by CE-C⁴ D after preconcentration by simultaneous adsorption using Al₂ O₃ beads. The results obtained from the proposed method were consistent with those obtained by HPLC-MS/MS, with a deviation of less than 15%. Our results indicate that the CE-C⁴ D performed after preconcentration by an adsorption technique using Al₂ O₃ beads is a new, inexpensive, and suitable method for quantifying AS surfactants in wastewater samples.

Adsorption Behavior of Polyelectrolyte onto Alumina and Application in Ciprofloxacin Removal

This study aims to investigate the adsorption behavior of a strong polyelectrolyte poly(styrenesulfonate) (PSS) onto alumina particles. Adsorption of PSS onto positively charged alumina surface increased with increasing ionic strength, indicating that non-electrostatic and electrostatic interaction controlled the adsorption. The removal of an emerging antibiotic ciprofloxacin (CFX) from water environment using PSS-modified alumina (PMA) was also studied. The removal of CFX using PMA was much higher than that using alumina particles without PSS modification in all pH ranges of 2–11. The removal of CFX reached 98% under the optimum conditions of pH 6, contact time of 120 min, adsorbent dosage of five milligrams per milliliter and ionic strength 10⁴-M NaCl. The adsorption isotherms of CFX at different salt concentrations fit well with a two-step adsorption model, while the adsorption kinetic fit well with a pseudo-second-order model with a good correlation coefficient (R² > 0.9969). The CFX-removal from a hospital wastewater using PMA was more than 75%. Our study demonstrates that adsorption of PSS onto alumina to modify the particle surface is important to form a novel adsorbent PMA for CFX-removal from water environments.

Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid

In hydraulic fracturing, fracturing fluids are used to create fractures in a hydrocarbon reservoir throughout transported proppant into the fractures. The application of many fields proves that conventional fracturing fluid has the disadvantages of residue(s), which causes serious clogging of the reservoir’s formations and, thus, leads to reduce the permeability in these hydrocarbon reservoirs. The development of clean (and cost-effective) fracturing fluid is a main driver of the hydraulic fracturing process. Presently, viscoelastic surfactant (VES)-fluid is one of the most widely used fracturing fluids in the hydraulic fracturing development of unconventional reservoirs, due to its non-residue(s) characteristics. However, conventional single-chain VES-fluid has a low temperature and shear resistance. In this study, two modified VES-fluid are developed as new thickening fracturing fluids, which consist of more single-chain coupled by hydrotropes (i.e., ionic organic salts) through non-covalent interaction. This new development is achieved by the formulation of mixing long chain cationic surfactant cetyltrimethylammonium bromide (CTAB) with organic acids, which are citric acid (CA) and maleic acid (MA) at a molar ratio of (3:1) and (2:1), respectively. As an innovative approach CTAB and CA are combined to obtain a solution (i.e., CTAB-based VES-fluid) with optimal properties for fracturing and this behaviour of the CTAB-based VES-fluid is experimentally corroborated. A rheometer was used to evaluate the visco-elasticity and shear rate & temperature resistance, while sand-carrying suspension capability was investigated by measuring the settling velocity of the transported proppant in the fluid. Moreover, the gel breaking capability was investigated by determining the viscosity of broken VES-fluid after mixing with ethanol, and the degree of core damage (i.e., permeability performance) caused by VES-fluid was evaluated while using core-flooding test. The experimental results show that, at pH-value (6.17), 30 (mM) VES-fluid (i.e., CTAB-CA) possesses the highest visco-elasticity as the apparent viscosity at zero shear-rate reached nearly to 106 (mPa·s). Moreover, the apparent viscosity of the 30 (mM) CTAB-CA VES-fluid remains 60 (mPa·s) at (90 ∘C) and 170 (s−1) after shearing for 2-h, indicating that CTAB-CA fluid has excellent temperature and shear resistance. Furthermore, excellent sand suspension and gel breaking ability of 30 (mM) CTAB-CA VES-fluid at 90 (∘C) was shown; as the sand suspension velocity is 1.67 (mm/s) and complete gel breaking was achieved within 2 h after mixing with the ethanol at the ratio of 10:1. The core flooding experiments indicate that the core damage rate caused by the CTAB-CA VES-fluid is (7.99%), which indicate that it does not cause much damage. Based on the experimental results, it is expected that CTAB-CA VES-fluid under high-temperature will make the proposed new VES-fluid an attractive thickening fracturing fluid.

Study on Adsorption and Aggregation in the Mixed System of Polyacrylamide, Cu(II) Ions and Innovative Carbon-Silica Composite

The paper presents an original study on adsorption and aggregation phenomena in a mixed system consisting of a macromolecular compound, heavy metal ions and an innovative adsorbent. The authors used ionic polyacrylamides (PAM), Cu(II) ions and carbon–silica composite (C-SiO₂) in the experiments. Such a system has not yet been described in the literature and therefore, the article is of significant novelty and great importance. The composite was prepared by mixing phenol–formaldehyde resin with silica and pyrolysis at 800 °C. The adsorbed amounts of Cu(II) ions and PAM were determined spectrophotometrically. C-SiO₂ was characterized using potentiometric titration, microelecrophoresis and Fourier Transform Infrared Spectroscopy (FTIR) analysis. In turn, the C-SiO₂ aggregation was established turbidimetrically as well as using a particle size analyzer. The obtained results indicated that both Cu(II) ions and ionic polyacrylamide were adsorbed on the composite surface at pH 6. The highest noted adsorbed amounts were 9.8 mg/g for Cu(II) and 35.72 mg/g for CT PAM-25%. Cu(II) ions increased the anionic PAM adsorbed and reduced the cationic PAM one. The adsorption of anionic PAM (50 ppm) stimulated the solid aggregation significantly. What is more, Cu(II) ions enhanced this process. The size of particles/aggregates formed without additives equaled 0.44 μm, whereas in the mixed Cu(II)/AN PAM system, they were even at 1.04 μm.

Removal of Lindane from Aqueous Solution Using Aluminum Hydroxide Nanoparticles with Surface Modification by Anionic Surfactant

In the present study, we investigated the removal of an emerging pesticide lindane from aqueous solution using synthesized aluminum hydroxide Al(OH)₃ (bayerite) nanomaterials with surface modification by an anionic surfactant sodium dodecyl sulfate (SDS). The Al(OH)₃ nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) and zeta potential. The lindane removal using SDS-modified nano-aluminum hydroxide nanoparticles (SMNAH) achieved removal of up to 93.68%, which was 3.3 times higher than that of nano-aluminum hydroxide nanoparticles. The adsorptive removal conditions were studied and found to have an adsorption time of 60 min, a pH of 6, an adsorbent dosage of 25 mg/mL and an ionic strength of 10 mM NaCl. After reusing four times, the removal efficiency of lindane using SMNAH still reached 75%. Two-step adsorption can fit adsorption isotherms of lindane onto SMNAH at two salt concentrations. On the basis of the change in zeta potential, surface functional groups and adsorption isotherms, we suggest that the formation of a bilayer micelle induced the removal of lindane.