Antibacterial activity of ultra-small copper oxide (II) nanoparticles synthesized by mechanochemical processing against S. aureus and E. coli

Antimicrobial Activity of Poly(methyl methacrylate) Doped with CuO and ZnO Nanoparticles

Oral health represents a significant factor in general health and life quality. A significant number of people are affected by tooth loss during their lifetimes, especially in the older population. Poly(methyl methacrylate) (PMMA) resins are the preferred option for replacing missing teeth due to the material stability, easy handling, low toxicity, and most importantly biocompatibility with human tissue. Even though PMMA is the preferable material for denture preparation, it is susceptible to microbial colonization, which can induce the development of oral infections. This study aimed to increase the antimicrobial effect of PMMA and compare the antimicrobial properties of PMMA incorporated with different amounts (2 and 5 wt %) of zinc oxide (ZnO; primary size 62.4 nm ± 16.7 nm) and copper oxide (CuO; primary size 434.0 nm ± 118.5 nm) nanoparticles to determine their antimicrobial effects on Gram-positive bacteria Staphylococcus aureus and yeast Candida albicans-pathogenic microbes often found on dentures. To understand the adhesion of microorganisms to PMMA-modified surfaces, the following surface properties were measured: roughness, contact angle, and ζ potential. In addition, CIE (the International Commission on Illumination) color parameters of the materials were determined. The bacterial adhesion was measured by viable plate counts and scanning electron microscopy. Our study showed that 5 wt % ZnO added to PMMA yields a promising denture material that is esthetically acceptable and shows antimicrobial properties toward both, Staphylococcus aureus and Candida albicans.

The Composition of the Dispersion Medium Determines the Antibacterial Properties of Copper (II) Oxide Nanoparticles Against Escherichia coli Bacteria

Copper (II) oxide nanoparticles (CuO NPs) attract much attention as a promising antimicrobial agent. We studied the antibacterial properties of three types of CuO NPs against Escherichia coli bacteria: flake-shaped particles with a diameter of 50-200 nm and a thickness of 10-20 nm (CuO-CD synthesized by chemical deposition), spherical particles with a size of 20-90 nm (CuO-EE obtained by electrical explosion), and rod-shaped particles with a length of 100-200 nm and a diameter of 30 × 70 nm (CuO-CS commercial sample). We tested how the shape, size, and concentration of the NPs, and composition of the dispersion medium affected the properties of the CuO NPs. We prepared dispersions based on distilled water, a 0.9% NaCl solution, and the LB broth by Lennox and used Triton X-100 and sodium dodecyl sulfate (SDS) as stabilizers. The concentration of NPs was 1-100 mg L-1. We showed that the dispersion medium composition and stabilizer type had the greatest influence on the antibacterial effects of CuO NPs. We observed the maximum antibacterial effect for all CuO NP types dispersed in water without a stabilizer, as well as in LB broth with the SDS stabilizer. The maximum inhibition of culture growth was observed under the influence of CuO-EE (by 30%) and in the LB broth with the SDS stabilizer (by 1.3-1.8 times depending on the type of particles). In the saline solution, the antibacterial effects were minimal; in some cases, the CuO NPs even promoted bacterial culture growth. SDS increased the antibacterial effects of NPs in broth and saline but decreased them in water. Finally, among the particle types, CuO-CS turned out to be the most bactericidal, which is probably due to their rod-shaped morphology and small diameter. At the same time, the concentration and aggregation effects of CuO NPs in the colloidal systems we studied did not have a linear action on their antibacterial properties. These results can be used in the development of antibacterial coatings and preparations based on CuO NPs to achieve their maximum efficiency, taking into account the expected conditions of their use.

Mucin Coatings Establish Multifunctional Properties on Commercial Sutures

During the wound healing process, complications such as bacterial attachment or inflammation may occur, potentially leading to surgical site infections. To reduce this risk, many commercial sutures contain biocides such as triclosan; however, this chemical has been linked to toxicity and contributes to the occurrence of bacterial resistance. In response to the need for more biocompatible alternatives, we here present an approach inspired by the innate human defense system: utilizing mucin glycoproteins derived from porcine mucus to create more cytocompatible suture coatings with antibiofouling properties. By attaching manually purified mucin to commercially available sutures through a simple and rapid coating process, we obtain sutures with cell-repellent and antibacterial properties toward Gram-positive bacteria. Importantly, our approach preserves the very good mechanical and tribological properties of the sutures while offering options for further modifications: the mucin matrix can either be condensed for controlled localized drug release or covalently functionalized with inorganic nanoparticles for hard tissue applications, which allows for tailoring a commercial suture for specific biomedical use cases.

Antimicrobial and Superhydrophobic CuONPs/TiO2 Hybrid Coating on Polypropylene Substrates against Biofilm Formation

Biofilm formation in common public places and hospitals is of great concern. Active antimicrobial coatings can prevent the formation of bacterial biofilms and the spreading of primary and secondary infections caused by contagious bacteria and viruses. In the present work, we report a simple spray coating process using copper oxide (CuO) nanoparticles (NPs) dispersed in a titanium dioxide (TiO2) sol, where CuONPs act as the active antimicrobial agent and TiO2 as the inorganic binder. Homogeneous CuONPs/TiO2 coating was obtained on polypropylene substrates by spraying the CuO/TiO2 sol using a commercial air gun, followed by drying at 80 °C. The amount of CuONPs loading in the coating was adjusted by controlling the number of coated layers. CuONPs and CuONPs/TiO2 coatings were characterized by XRD, BET, X-ray fluorescence spectroscopy, AFM, and field emission scanning electron microscopy techniques. All of the coated films showed dual activity, i.e., antimicrobial and superhydrophobicity. A high bactericidal effect against both Escherichia coli and Staphylococcus aureus was observed for the coated substrates. Coatings with higher CuONPs showed greater antibacterial activity, reaching R value >6, and no bacterial colonies were detected after 24 h of incubation. An increasing trend of water contact angle was observed with the increasing amount of CuONP loading.

Antibacterial Properties of Copper Oxide Nanoparticles (Review)

The use of metal and metal oxide nanoparticles is frequently regarded as a potential solution to the issue of bacterial antibiotic resistance. Among the proposed range of nanoparticles with antibacterial properties, copper oxide nanoparticles are of particular interest. Although the antibacterial properties of copper have been known for a considerable period of time, studies on the effects of copper oxide nanomaterials with respect to biological systems have attracted considerable attention in recent years. This review presents a summary of the antibacterial properties of copper oxide nanoparticles, the mechanisms by which the antibacterial effect is realized, and the key reported methods of modifying these nanoparticles to improve their antibacterial activity. A comparative analysis of the effectiveness of these nanoparticles is presented depending on the type of microorganism, the shape of the nanoparticles, and the Gram classification of bacteria based on data from published sources. In addition, the review addresses the biological activities of copper oxide nanoparticles, including their antifungal and cytotoxic properties, as well as their "antioxidant" activity. According to the conducted analysis of the literature data, it can be concluded that copper oxide nanoparticles have a significant bacteriostatic potential with respect to a wide range of microorganisms and, in some cases, contribute to the inhibition of fungal growth. At the same time, the sensitivity of Gram-positive bacteria to the effect of copper oxide nanoparticles was often higher than that of Gram-negative bacteria.

Cu-doped calcium phosphate supraparticles for bone tissue regeneration

Calcium phosphate (CaP) minerals have shown great promise as bone replacement materials due to their similarity to the mineral phase of natural bone. In addition to biocompatibility and osseointegration, the prevention of infection is crucial, especially due to the high concern of antibiotic resistance. In this context, a controlled drug release as well as biodegradation are important features which depend on the porosity of CaP. An increase in porosity can be achieved by using nanoparticles (NPs), which can be processed to supraparticles, combining the properties of nano- and micromaterials. In this study, Cu-doped CaP supraparticles were prepared to improve the bone substitute properties while providing antibacterial effects. In this context, a modified sol-gel process was used for the synthesis of CaP NPs, where a Ca/P molar ratio of 1.10 resulted in the formation of crystalline β-tricalcium phosphate (β-TCP) after calcination at 1000 °C. In the next step, CaP NPs with Cu2+ (0.5-15.0 wt%) were processed into supraparticles by a spray drying method. Cu release experiments of the different Cu-doped CaP supraparticles demonstrated a long-term sustained release over 14 days. The antibacterial properties of the supraparticles were determined against Gram-positive (Bacillus subtilis and Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, where complete antibacterial inhibition was achieved using a Cu concentration of 5.0 wt%. In addition, cell viability assays of the different CaP supraparticles with human telomerase-immortalized mesenchymal stromal cells (hMSC-TERT) exhibited high biocompatibility with particle concentrations of 0.01 mg mL-1 over 72 hours.

Application of Argon Plasma Technology for the Synthesis of Anti-Infective Copper Nanoparticles

The synthesis of copper nanoparticles (CuNPs) was accomplished by using a rapid, green, and versatile argon plasma reduction method that involves solvent extraction. With this method, a plasma-solid state interaction forms and CuNPs can be synthesized from copper(II) sulfate using a low-pressure, low-temperature argon plasma. Characterization studies of the CuNPs revealed that when a metal precursor is treated under optimal experimental conditions of 80 W of argon plasma for 300 s, brown CuNPs are synthesized. However, when those same brown CuNPs are placed in Milli-Q water for a period of 10 days, oxidation occurs and green CuNPs are formed. Confirmation of the chemical identity of the CuNPs was performed by using X-ray photoelectron spectroscopy. The results reveal that the brown CuNPs are predominantly Cu0 or what we refer to as CuNPs, while the green CuNPs are a mixture of Cu0 and Cu(OH)2 NPs. Upon further characterization of both brown and green CuNPs with scanning electron microscopy (SEM), the results depict brown CuNPs with a rod-like shape and approximate dimensions of 40 nm × 160 nm, while the green CuNPs were smaller in size, with dimensions of 40-80 nm, and more of a round shape. When testing the antibacterial activity of both brown and green CuNPs, our findings demonstrate the effectiveness of both CuNPs against Escherichia coli and Staphylococcus aureus bacteria at a concentration of 17 μg/mL. The inactivation of S. aureus and E. coli 7-day-old biofilms required CuNP concentrations of 99 μg/mL. SEM images of treated 7-day-old S. aureus and E. coli biofilms depict cell membranes that are completely damaged, suggesting a physical killing mechanism. In addition, when the same concentration of CuNPs used to inactivate biofilms were tested with human fibroblasts, both brown and green CuNPs were found to be biocompatible.

Light, Copper, Action: Visible-Light Illumination Enhances Bactericidal Activity of Copper Particles

Bacteria are an old concern to human health, as they are responsible for nosocomial infections, and the number of antibiotic-resistant microorganisms keeps growing. Copper is known for its intrinsic biocidal properties, and therefore, it is a promising material to combat infections when added to surfaces. However, its biocidal properties in the presence of light illumination have not been fully explored, especially regarding the use of microsized particles since nanoparticles have taken over all fields of research and subjugated microparticles despite them being abundant and less expensive. Thus, the present work studied the bactericidal properties of metallic copper particles, in microscale (CuMPs) and nanoscale (CuNPs), in the absence of light and under white LED light illumination. The minimum bactericidal concentration (MBC) of CuMPs against Staphylococcus aureus that achieved a 6-log reduction was 5.0 and 2.5 mg mL-1 for assays conducted in the absence of light and under light illumination, respectively. Similar behavior was observed against Escherichia coli. The bactericidal activity under illumination provided a percentage increase in log reduction values of 65.2% for S. aureus and 166.7% for E. coli when compared to the assays under dark. This assay reproduced the testing CuNPs, which showed superior bactericidal activity since the concentration of 2.5 mg mL-1 promoted a 6-log reduction of both bacteria even under dark. Its superior bactericidal activity, which overcame the effect of illumination, was expected once the nanoscale facilitated the interaction of copper within the surface of bacteria. The results from MBC were supported by fluorescence microscopy and atomic absorption spectroscopy. Therefore, CuMPs and CuNPs proved to have size- and dose-dependent biocidal activity. However, we have shown that CuMPs photoactivity is competitive compared to that of CuNPs, allowing their application as a self-cleaning material for disinfection processes assisted by conventional light sources without additives to contain the spread of pathogens.

Fine-Tuned Graphene Oxide Nanocomposite: Harnessing Copper(II)-Imidazole Complex for Enhanced Biological Responses and Balanced Photocatalytic Functionality

In this study, the synthesis of biologically active copper(II) complex [Cu(im)2]Cl2 was achieved using a reported method. Subsequently, this copper(II) complex was strategically grafted onto graphene oxide, resulting in the formation of a nanocomposite denoted as copper(II)-complex-grafted graphene oxide (Cu-GO). The comprehensive characterization of Cu-GO was conducted through various techniques, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), UV-visible spectroscopy, emission spectra analysis, X-ray photoelectron spectroscopy (XPS), and Copper K-edge X-ray Absorption Near Edge Structure (XANES) spectroscopy. The antibacterial efficacy of Cu-GO compounds was assessed using disk diffusion and microbroth dilution methods. Notably, the copper complex exhibited the highest effectiveness, showcasing a Minimal Inhibitory Concentration (MIC) value of 500 µL against Klebsiella bacteria. The antibacterial activities of all compounds were systematically screened, revealing the superior performance of the copper complex compared to standalone copper compounds. Expanding the scope of the investigation, we explored the antioxidant and anti-obesity activities of the copper complexes against Klebsiella organisms. The results underscore promising directions for the further exploration of the diverse health-related applications of these compounds. Moreover, the photocatalytic performance of the Cu-GO nanocomposite was evaluated under sunlight irradiation. Notably, the antioxidant and anti-obesity activities of Cu-GO, assessed in terms of percentage inhibition at a concentration of 200 mg/mL, exhibited values of 41% and 45%, respectively. Additionally, the Cu-GO composite exhibited exceptional efficacy, achieving a degradation efficiency of 74% for RhB under sunlight irradiation, surpassing both graphite and GO. These findings not only demonstrate enhanced biological activity, but also highlight a notable level of moderate photocatalytic performance. Such dual functionality underscores the potential versatility of Cu-GO nanocomposites across various applications, blending heightened biological efficacy with controlled photocatalysis. Our study offers valuable insights into the multifunctional attributes of copper(II)-complex-grafted graphene oxide nanocomposites, thereby paving the way for their broader utilization in diverse fields.

Antimicrobial potential of linear low-density polyethylene food packaging with Ag nanoparticles in different carriers (Silica and Hydroxyapatite)

Silver nanoparticles incorporation into polymeric packaging aims to prevent microbiological contamination in food products, thus ensuring superior food safety and preservation. In this context, this study aimed to verify the antimicrobial efficacy of linear low-density polyethylene (LLDPE) films incorporated with silver nanoparticles (AgNPs) dispersed in silica (SiO2) and hydroxyapatite (HAP) carriers at different concentrations. AgNPs + carriers polymer films were characterized at 0.2, 0.4, and 0.6% concentrations using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission gun-scanning electron microscope (FEG-SEM), thermogravimetric analyzer (TGA), differential scanning calorimetry (DSC), and migration in acidic and non-acidic simulants. Antimicrobial action was investigated on Gram-positive Staphylococcus aureus, Gram-negative Escherichia coli, and the Penicillium expansum and Fusarium solani fungi with antimicrobial activity by direct contact test and bacterial imaging by scanning electron microscopy. AgNPs addition to the LLDPE matrix did not interfere with the films' chemical and thermal properties and presented no significant migration to the external medium. For antimicrobial action, silver nanoparticles showed, in most concentrations, an inhibition percentage higher than 90% on all microorganisms studied, regardless of the carrier. However, a greater inhibitory action on S. aureus and between carriers was found, making hydroxyapatite more effective. The results indicated that nanostructured films with AgNPs + hydroxyapatite showed more promising antimicrobial action on microorganisms than AgNPs + silica, making hydroxyapatite with silver nanoparticle potentially useful in food packaging, improving safety and maintaining quality.

Biosurfactant-capped CuO nanoparticles coated cotton/polypropylene fabrics toward antimicrobial textile applications

The global COVID-19 pandemic has led to an increase in the importance of implementing effective measures to prevent the spread of microorganisms. Consequently, there is a growing demand for antimicrobial materials, specifically antimicrobial textiles and face masks, because of the surge in diseases caused by bacteria and viruses like SARS-CoV-2. Face masks that possess built-in antibacterial properties can rapidly deactivate microorganisms, enabling reuse and reducing the incidence of illnesses. Among the numerous types of inorganic nanomaterials, copper oxide nanoparticles (CuO NPs) have been identified as cost-effective and highly efficient antimicrobial agents for inactivating microbes. Furthermore, biosurfactants have recently been recognized for their potential antimicrobial effects, in addition to inorganic nanoparticles. Therefore, this research's primary focus is synthesizing biosurfactant-mediated CuO NPs, integrating them into natural and synthetic fabrics such as cotton and polypropylene and evaluating the resulting fabrics' antimicrobial activity. Using rhamnolipid (RL) as a biosurfactant and employing a hydrothermal method with a pH range of 9-11, RL-capped CuO NPs are synthesized (RL-CuO NPs). To assess their effectiveness against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) microorganisms, the RL-CuO NPs are subjected to antibacterial testing. The RL-capped CuO NPs exhibited antimicrobial activity at much lower concentrations than the individual RL, CuO. RL-CuO NPs have shown a minimum inhibitory concentration (MIC) of 1.2 mg ml-1and minimum bactericidal concentration (MBC) of 1.6 mg ml-1forE. coliand a MIC of 0.8 mg ml-1and a MBC of 1.2 mg ml-1forS. aureus, respectively. Furthermore, the developed RL-CuO NPs are incorporated into cotton and polypropylene fabrics using a screen-printing technique. Subsequently, the antimicrobial activity of the coated fabrics is evaluated, revealing that RL-CuO NPs coated fabrics exhibited remarkable antibacterial properties against both gram-positive and gram-negative bacteria.

Nanotechnology in the Diagnosis and Treatment of Antibiotic-Resistant Infections

The development of antimicrobial resistance (AMR), along with the relative reduction in the production of new antimicrobials, significantly limits the therapeutic options in infectious diseases. Thus, novel treatments, especially in the current era, where AMR is increasing, are urgently needed. There are several ongoing studies on non-classical therapies for infectious diseases, such as bacteriophages, antimicrobial peptides, and nanotechnology, among others. Nanomaterials involve materials on the nanoscale that could be used in the diagnosis, treatment, and prevention of infectious diseases. This review provides an overview of the applications of nanotechnology in the diagnosis and treatment of infectious diseases from a clinician's perspective, with a focus on pathogens with AMR. Applications of nanomaterials in diagnosis, by taking advantage of their electrochemical, optic, magnetic, and fluorescent properties, are described. Moreover, the potential of metallic or organic nanoparticles (NPs) in the treatment of infections is also addressed. Finally, the potential use of NPs in the development of safe and efficient vaccines is also reviewed. Further studies are needed to prove the safety and efficacy of NPs that would facilitate their approval by regulatory authorities for clinical use.

Antiultraviolet, Antioxidant, and Antimicrobial Properties and Anticancer Potential of Novel Environmentally Friendly Amide-Modified Gallic Acid Derivatives

Polyphenols and amides isolated from natural products have various biological functions, such as antioxidant, antimicrobial, anticancer, and antiviral activities, and they are widely used in the fields of food and medicine. In this work, four novel and environmentally friendly amide-modified gallic acid derivatives (AMGADs), which were prepared by using different amides to modify gallic acid (GA) from Polygonaceae plants, displayed good antiultraviolet (anti-UV), antioxidant, antimicrobial, and anticancer effects. Significantly, the anti-UV capability of compounds n1 and n2 was notably superior to that of the UV absorber GA. Moreover, compound n2 possessed better 2,2-diphenyl-1-picrylhydrazyl radical (DPPH•) scavenging ability and ferric reducing antioxidant power than vitamin C. The antibacterial activities of all AMGADs, with inhibition rates of more than 96.00 and 79.00% for Escherichia coli and Staphylococcus aureus, respectively, were better than those of GA. Compound n1 had broad-spectrum anticancer activity, and its inhibitory effect on HepG2 cells exceeded that of 5-fluorouracil. The good and rich bioactivities of these AMGADs revealed that combining GA with amides is conducive to improving the activity of GA, and this study laid a good foundation for their scientific application in the fields of food and medicine.

Facile synthesis of CuONPs using Citrus limon juice for enhancing antibacterial activity against methicillin-resistant Staphylococcus aureus, beta-lactamase and tetracycline-resistant Escherichia coli

Antimicrobial resistance (AMR) resulting from indiscriminate use of antibiotics in various fields of agriculture such as livestock farming, aquaculture, and croup fields become an emerging catatroph for the health (human, animal) and environment. Among those, poultry farming has been considered as one of the major contributors of multidrug-resistant (MDR) bacteria. Focusing this, the present research is designed for green synthesis of copper oxide nanoparticles (CuONPs) with the aim of their application in antibiotic-free poultry farming for curving use of antibiotics in that sector. For that, antibacterial CuONPs were nanoformulated to decrease the required doses of bulk CuSO4. We used a CuSO4·5H2O solution as a Cu2+ source and Citrus limon juice as a reducing agent as well as capping agent. Particle yield was initially confirmed by the λmax specific to CuONPs (295 nm) using UV-Vis spectroscopy. The presence of the Cu-O group during particle formation and crystallinity with the purity of yielded NPs was confirmed with Fourier-transform infrared spectroscopy and X-ray diffractometry. The round to spherical CuONPs of 92-155 nm average size was confirmed with atomic force, scanning electron, and transmission electron microscopy. The concentration of yielded NPs was calculated with the dynamic light scattering. The physical characterization tools indicated a maximum CuONPs yield with a 0.001 M ion source with 15% reducing agents after 12 h reduction. Antibacterial effectivity was tested against methicillin-resistant Staphylococcus aureus and tetracycline- and beta-lactamase-resistant Escherichia coli, confirmed by PCR amplicon band at 163 bp, 643 bp, and 577 bp for the mecA, blaTEM-1 and tetA genes, respectively. An antibiogram assay of CuONPs showed a maximum zone of inhibition of 26 ± 0.5 mm for the synthesized particles. The minimum inhibitory and bactericidal concentrations were 1.6 μg ml-1 and 3.1 μg ml-1, respectively, for broad-spectrum application. Finally, the biocompatibility of CuONPs was determined by demonstrating a nonsignificant decrease of BHK-21 cell viability at <2 MIC doses for complying their future in vivo applicability.

Green metrics in mechanochemistry

The development of new green methodologies and their broader adoption for promoting sustainable development in chemistry laboratories and industry play a significant role in society, due to the economic importance of chemistry and its widespread presence in everyday life. Therefore, a sustainable approach to chemistry contributes to the well-being of the worldwide population and complies with the United Nations Sustainable Development Goals (UN SDGs) and the European Green Deal. The review highlights how batch and continuous mechanochemical methods are an eco-friendly approach for organic synthesis, with a lower environmental footprint in most cases, compared to solution-based procedures. The assessment is objectively based on the use of green metrics (e.g., atom and real atom economy, E-factor, process mass intensity, material parameter recovery, Eco-scale, stoichiometric factor, etc.) and indicators (e.g. DOZN tool and life cycle assessment, LCA, studies) applied to organic transformations such as synthesis of the amide bond, carbamates, heterocycles, active pharmaceutical ingredients (APIs), porphyrins, porous organic polymers (POPs), metal- or acid-catalysed processes, multicomponent and condensation reactions, rearrangements, etc. The generalized absence of bulk solvents, the precise control over the stoichiometry (i.e., using agents in a stoichiometrically rather than in excess), and the more selective reactions enabling simplified work-up procedures are the distinctive factors, marking the superiority of mechanochemical processes over solution-based chemistry.

Photodynamic Cationic Ultrasmall Copper Oxide Nanoparticles-Loaded Liposomes for Alleviation of MRSA Biofilms

Introduction

As we enter the post-antibiotic era, the rise of antibiotic-resistant pathogenic bacteria is becoming a serious threat to public health. This problem is further complicated by antibiotic-resistant biofilms, for which current treatment options are limited.

Methods

To tackle this challenge, we propose a novel approach that involves the use of photodynamic cationic pH-sensitive liposomes loaded with ultra-small copper oxide (Ce6@Lipo/UCONs) to effectively eliminate drug-resistant bacteria and eradicate biofilms while minimizing safety concerns and the risk of resistance development.

Results

Our study demonstrates that Ce6@Lipo/UCONs have minimal toxicity to mammalian cells and can significantly enhance the association affinity with methicillin-resistant Staphylococcus aureus (MRSA) as confirmed by fluorescent microscope and flow cytometry, thereby greatly improving the bactericidal effect against planktonic MRSA. The cationic nature of Ce6@Lipo/UCONs also enables them to penetrate MRSA biofilms and respond to the acidic microenvironment within the biofilm, effectively releasing the loaded UCONs. Our results indicate that Ce6@Lipo/UCONs could effectively eliminate biofilms under light irradiation conditions, as evidenced by both biomass analysis and scanning electron microscopy observations. In addition, significant antibacterial effects and abscess healing were observed in MRSA-infected mice treated with Ce6@Lipo/UCONs upon light irradiation, while good biocompatibility was achieved in vivo.

Conclusion

Taken together, our findings suggest that photodynamic cationic ultrasmall copper oxide nanoparticles-loaded liposomes are a highly promising nano platform for combating antibiotic-resistant microbial pathogens and biofilms. The effective biofilm penetration and synergistic effect between photodynamic inactivation and metal sterilization make them a valuable tool for overcoming the challenges posed by antibiotic resistance.

Catalytic performance and antibacterial behaviour with molecular docking analysis of silver and polyacrylic acid doped graphene quantum dots

In this research, a fixed concentration (3 wt%) of Ag/PAA and PAA/Ag doped graphene quantum dots (GQDs) were synthesized using the co-precipitation technique. A variety of characterization techniques were employed to synthesize samples to investigate their optical, morphological, structural, and compositional analyses, antimicrobial efficacy, and dye degradation potential with molecular docking analysis. GQDs have high solubility, narrow band gaps, and are suitable for electron acceptors and donors but show less adsorption and catalytic behavior. Incorporating polyacrylic acid (PAA) into GQDs increases the catalytic and antibacterial activities due to the carboxylic group (-COOH). Furthermore, introducing silver (Ag) increased the degradation of dye and microbes as it had a high surface-to-volume ratio. In addition, molecular docking studies were used to decipher the mechanism underlying the bactericidal action of silver and polyacrylic acid-doped graphene quantum dots and revealed inhibition of β-lactamase and DNA gyrase.

Effectiveness of metal and metal oxide nanoparticles against bacterial biofilms: Perspectives and limitations

In the last few years, there has been a necessary demand in the pharmaceutical industries for finding a treatment against biofilms formed by different bacterial species. We are aware of the fact that classical processes, which are already there for the removal of bacterial biofilms gives a very low efficiency and consequently antimicrobial resistance makes it even worse. To cope up with the cited problems, scientists from the past few years are inclining toward various types of nanoparticle based treatment procedures as a pharmaceutical agent against bacterial biofilms. Nanoparticles are known for their extremely efficient antimicrobial properties. The current review gives a description of different types of metal oxide nanoparticles and their antibiofilm properties. It also shows a comparative analysis of the nanoparticles and depicts the efficiency rates of biofilm degradation in each of them. It explains the mechanism of the nanoparticles through which the disintegration of bacterial biofilm is carried out. Lastly, the review throws light upon the limitations of different nanoparticles, their safety issues, the mutagenicity, genotoxicity concerns, and toxicity hazards caused by them.

Bacterial cell permeability study by metal oxide and mixed metal oxide nanoparticles: analysis of the factors contributing to the antibacterial activity of nanoparticles

In this work, we investigate the nanoparticle-cell wall interaction by NiO and mixed metal oxide CuO-NiO nanoparticles. We have synthesized and characterized the nanoparticles using XRD, FESEM, EDS, UV vis. spectroscopy, FTIR, Zeta, and TEM analysis in our previous work. Furthermore, a preliminary antibacterial study showed that both the nanoparticles performed very well as antibacterial agents. In this extended work, we investigate the mechanism of interaction of NiO and CuO-NiO nanoparticles with S. aureus and E. coli cells as there are number of studies for antibacterial mechanism of CuO nanoparticles. The uptake of crystal violet dye in the outer bacterial membrane, the release of ß-galactosidase enzyme, and relative electric conductivity assay were used to investigate changes in the permeability and integrity of the cell membrane. Superoxide ions, which are produced intracellularly as ROS by nanoparticles, severely damage bacterial membranes. Zeta potential measurement, which resulted in surface charge neutralization, proved membrane instability. FTIR analysis was used to identify changes in the proteins, carbohydrates, and fatty acids that make up the chemical composition of cell surfaces. AFM imaging demonstrated extensive alteration of the nanomechanical and surface characteristics. Confocal microscopy examination supported the DNA fragmentation and nanoparticle-cell adhesion. Due to their enhanced antibacterial activity when compared to monometallic oxide nanoparticles, this study demonstrated that mixed metal oxides can be employed in the health and biomedical sectors.

Synthesis of Antibacterial Copper Oxide Nanoparticles by Pulsed Laser Ablation in Liquids: Potential Application against Foodborne Pathogens

Spherical copper oxide nanoparticles (CuO/Cu2O NPs) were synthesized by pulsed laser ablation in liquids (PLAL). The copper target was totally submerged in deionized (DI) water and irradiated by an infrared laser beam at 1064 nm for 30 min. The NPs were then characterized by dynamic light scattering (DLS) and atomic emission spectroscopy (AES) to determine their size distribution and concentration, respectively. The phases of copper oxide were identified by Raman spectroscopy. Then, the antibacterial activity of CuO/Cu2O NPs against foodborne pathogens, such as Salmonella enterica subsp. enterica serotype Typhimurium DT7, Escherichia coli O157:H7, Shigella sonnei ATCC 9290, Yersinia enterocolitica ATCC 27729, Vibrio parahaemolyticus ATCC 49398, Bacillus cereus ATCC 11778, and Listeria monocytogenes EGD, was tested. At a 3 ppm concentration, the CuO/Cu2O NPs exhibited an outstanding antimicrobial effect by killing most bacteria after 5 h incubation at 25 °C. Field emission scanning electron microscope (FESEM) confirmed that the CuO/Cu2O NPs destructed the bacterial cell wall.

Facile Implementation of Antimicrobial Coatings through Adhesive Films (Wraps) Demonstrated with Cuprous Oxide Coatings

Antimicrobial coatings have a finite lifetime because of wear, depletion of the active ingredient, or surface contamination that produces a barrier between the pathogen and the active ingredient. The limited lifetime means that facile replacement is important. Here, we describe a generic method for rapidly applying and reapplying antimicrobial coatings to common-touch surfaces. The method is to deposit an antimicrobial coating on a generic adhesive film (wrap), and then to attach that modified wrap to the common-touch surface. In this scenario, the adhesion of the wrap and antimicrobial efficacy are separated and can be optimized independently. We demonstrate the fabrication of two antimicrobial wraps, both using cuprous oxide (Cu₂O) as the active ingredient. The first uses polyurethane (PU) as the polymeric binder and the second uses polydopamine (PDA). Our antimicrobial PU/Cu₂O and PDA/Cu₂O wraps, respectively, kill >99.98% and >99.82% of the human pathogen, P. aeruginosa, in only 10 min, and each of them kill >99.99% of the bacterium in 20 min. These antimicrobial wraps can be removed and replaced on the same object in <1 min with no tools. Wraps are already frequently used by consumers to coat drawers or cars for aesthetic or protective purposes.

Review on Generation and Characterization of Copper Particles and Copper Composites Prepared by Mechanical Milling on a Lab-Scale

This review aims to expose mechanical milling as an alternative method for generating copper-based particles (copper particles (CuP) and copper composites (CuC)); more specifically, via a top-down or bottom-up approach, on a lab-scale. This work will also highlight the different parameters that can affect the size distribution, the type, and the morphology of the obtained CuP or CuC, such as the type of mechanical mill, ball-to-powder ratios (BPR), the milling speed, milling time, and the milling environment, among others. This review analyzes various papers based on the Cu-based particle generation route, which begins with a pretreatment step, then mechanical milling, its approach (top-down or bottom-up), and the post-treatment. Finally, the characterization methods of the resulting CuP and CuC through mechanical milling are also discussed.

Antibacterial activity of CuO-Ag Janus like nanoparticles against recombinant strain Escherichia coli

The toxic action of CuO-Ag Janus particles and a bicomponent mixture of CuO and Ag particles have been studied against a recombinant strain Escherichia coli K12 TG1 with cloned luxCDABE genes of marine bacteria Photobacterium leiognathi 54D10. An original method was used for the preparation CuO-Ag Janus like  nanoparticles by simultaneous electrical explosion of twisted Cu and Ag wires in a mixture of argon and oxygen gases. The bioluminescence inhibition on recombinant strain E. coli shows that CuO-Ag Janus NPs were effective. The concentration by 50% (EC₅₀) for CuO-Ag Janus NPs was 0.03 ± 0.001 mg/ml (p < 0.05). The bioactivity of the bicomponent mixture of CuO and Ag NPs (EC₅₀) was 0.25 ± 0.002 mg/ml (p < 0.05). The effective concentration of CuO-Ag Janus NPs against E. coli was comparatively lower than those of bicomponent mixture CuO and Ag against which explains the higher activity of CuO-Ag Janus NPs. The toxicity values of CuO and Ag as monocomponent nanoparticles were 2-32 times lower compared with the bicomponent nanoparticles. A dose-dependent inhibition of bacterial luminescence developed over time was noted. The result of contact E. coli with CuO-Ag Janus particles was 100% suppression of bacterial luminescence from the first minutes of contact occured starting with a content of 2.0 mg/ml and within the next 180 min. The effect of bioactivity prolonged in the final concentration of nanopowder (EC₁₀₀ = 0.0625 ± 0.002 mg/ml) (p < 0.05). CuO-Ag Janus particles exhibited more pronounced antibacterial activity compared to CuO, Ag nanoparticles and their mechanical mixture.

Toxicological assessment of Phormidium sp. derived copper oxide nanoparticles for its biomedical and environmental applications

Driven by the need to biosynthesized alternate biomedical agents to prevent and treat infection, copper oxide nanoparticles (CuONPs) have surfaced as a promising avenue. Cyanobacteria-derived synthesis of CuONPs is of substantive interest as it offers an eco-friendly, cost-effective, and biocompatible route. In the present study biosynthesized CuONPs were characterized and investigated regarding their toxicity. Morphological analysis using TEM, SEM and AFM showed the spherical particle size of 20.7 nm with 96% copper that confirmed the purity of CuONPs. Biogenic CuONPs with IC₅₀ value of 64.6 µg ml^-1 showed 90% scavenging of free radicals in superoxide radical scavenging assay. CuONPs showed enhanced anti-inflammatory activity by 86% of protein denaturation with IC₅₀ value of 89.9 µg ml^-1. Biogenic CuONPs exhibited significant toxicity against bacterial strains with lowest MIC value of 62.5 µg ml^-1 for B. cereus and fungal strain with a MIC value of 125 µg ml^-1 for C. albicans. In addition CuONPs demonstrated a high degree of synergistic interaction when combined with standard drugs. CuONPs exhibited significant cytotoxicity against non-small cell lung cancer with an IC₅₀ value of 100.8 µg ml^-1 for A549 and 88.3 µg ml^-1 for the H1299 cell line with apoptotic activities. Furthermore, biogenic CuONPs was evaluated for their photocatalytic degradation potential against methylene blue dye and were able to removed 94% dye in 90 min. Free radical scavenging analysis suggested that CuONPs assisted dye degradation was mainly induced by hydroxide radicals. Biogenic CuONPs appears as an eco-friendly and cost effective photocatalyst for the treatment of wastewater contaminated with synthetic dyes that poses threat to aquatic biota and human health. The present study highlighted the blend of biomedical and photocatalytic potential of Phormidium derived CuONPs as an attractive approach for future applications in nanomedicine and bioremediation.

Concurrent Tissue Engineering for Wound Healing in Diabetic Rats Utilizing Dual Actions of Green Synthesized CuO NPs Prepared from Two Plants Grown in Egypt

Purpose

Diabetes mellitus is among the disrupting factors of orchestrated events in wound healing. This necessitates the urge for tailored medications, which are continually offered by nano-sized materials. Herein, we present greenly synthesized copper oxide nanoparticles (CuO NPs), obtained from either Punica granatum L. (PG) or Pisidium guajava L. (GV) extract, to function as potent bactericidal and fungicidal materials that promote regeneration and healing of the targeted diabetic wounded tissues.

Methods

PG or GV plant extracts were compared as source of reducing agents for CuO NPs synthesis process. The yield and photocatalytic degradation potential were compared. NPs obtained from the superior extract, PG, were characterized using particles size, zeta potential, XRD, TEM, SEM, and EDX. The antimicrobial effects were evaluated on multidrug-resistant human pathogens and then the percentage biofilm inhibitory concentration was determined. The cytotoxicity and wound scratch study were conducted on a normal human skin cell line. In-vivo wound healing activity in diabetic rats was assessed along with histopathological and immunohistochemical examination of CD45 and α-SMA.

Results

The greenly synthesized CuO NPs are spherical in shape having a diameter of 233nm. CuO NPs (250µg/mL) acted as promising biocontrol agent against a variety of multidrug-resistant human pathogens. They significantly exhibited 29.460±0.811% healing of the scratched wound compared to only 2.001±0.155% for the control. Wound healing experiments revealed the safety of a low CuO NPs concentration in a diabetic animal model as well as on human normal skin fibroblast cell line. The treated group with a dose of 2mg/cm2 showed superior results with a WC50 value of 7.2 days, and 92% wound contraction after 13-days. Immunohistochemical investigation of the same group demonstrated well-established fibrous tissue (5.7±3.7/HPF), and an amplified granulation tissue of recently developed blood vessels (70±1.5/HPF).

Conclusion

Green synthesized CuO NPs could overcome drug resistance and promote wound healing process effectively.

Synergistic Action between Copper Oxide (CuO) Nanoparticles and Anthraquinone-2-Carboxylic Acid (AQ) against Staphylococcus aureus

Infections linked to Staphylococcus spp. are difficult to treat with current antibiotic therapy, resulting in increased antibiotic resistance populations. One of the leading strategies to overcome this issue is the novel combination of antibacterial nanoparticles (NPs) and sustainable natural compounds. This study reported the identification of a new synergistic combination of copper oxide (CuO) NPs, a well-known antibacterial agent against Staphylococcus spp., and anthraquinone-2-carboxylic acid (AQ), a plant-derived antimicrobial compound, with a potent and specific fashion in killing Staphylococcus spp. CuO NPs were synthesized using the one-pot coprecipitation method and characterized by using X-ray diffraction and transmission electron microscopy. Further checkerboard analysis showed that CuO NPs and AQ increased the antibacterial activity of individual agents against Staphylococcus aureus among Staphylococcus spp. by four- to eightfold compared to individual materials. Additional mechanistic studies on the synergy revealed that the inhibition of biofilm formation and loss of cytoplasmic volume with cell shrinkage are the major actions of the combination in expressing the phenotype. This study clearly showed that the combination of CuO NPs and AQ would be a novel strategy to eradicate S. aureus infections.

Mechanochemical Synthesis of Nanoparticles for Potential Antimicrobial Applications

There is an increased interest in porous materials due to their unique properties such as high surface area, enhanced catalytic properties, and biological applications. Various solvent-based approaches have been already used to synthesize porous materials. However, the use of large volume of solvents, their toxicity, and time-consuming synthesis make this process less effective, at least in terms of principles of green chemistry. Mechanochemical synthesis is one of the effective eco-friendly alternatives to the conventional synthesis. It adopts the efficient mixing of reactants using ball milling without or with a very small volume of solvents, gives smaller size nanoparticles (NPs) and larger surface area, and facilitates their functionalization, which is highly beneficial for antimicrobial applications. A large variety of nanomaterials for different applications have already been synthesized by this method. This review emphasizes the comparison between the solvent-based and mechanochemical methods for the synthesis of mainly inorganic NPs for potential antimicrobial applications, although some metal-organic framework NPs are briefly presented too.

Synthesis, Characterization, and Antibacterial Activity of Mg-Doped CuO Nanoparticles

This study aims to investigate the effect of magnesium (Mg) doping on the characteristics and antibacterial properties of copper oxide (CuO) nanoparticles (NPs). The Mg-doped CuO NPs were fabricated by the co-precipitation method. NPs were characterized by X-ray Powder Diffraction (XRD), Transmission Electron Microscope (TEM), Energy Dispersive X-ray (EDX) analysis, Fourier Transform Infrared Spectroscopy (FTIR), and Photoluminescence (PL). Broth microdilution, agar-well diffusion, and time-kill assays were employed to assess the antibacterial activity of the NPs. XRD revealed the monoclinic structure of CuO NPs and the successful incorporation of Mg dopant to the Cu_1-xMg_xO NPs. TEM revealed the spherical shape of the CuO NPs. Mg doping affected the morphology of NPs and decreased their agglomeration. EDX patterns confirmed the high purity of the undoped and Mg-doped CuO NPs. FTIR analysis revealed the shifts in the Cu-O bond induced by the Mg dopant. The position, width, and intensity of the PL bands were affected as a result of Mg doping, which is an indication of vacancies. Both undoped and doped CuO NPs exhibited significant antibacterial capacities. NPs inhibited the growth of Gram-positive and Gram-negative bacteria. These results highlight the potential use of Mg-doped CuO NPs as an antibacterial agent.

Antibacterial activities against Staphylococcus aureus and Escherichia coli of extracted Piper betle leaf materials by disc diffusion assay and batch experiments

The use of contaminated water by bacteria may cause many diseases, and thus clean water is needed. Chlorine is normally used for the disinfection of wastewater treatment; however, it produces unwanted odors. Using extracted Piper betle (P. betle) is an interesting choice because it is a good chemical compound for bacterial inhibitions. This study attempted to extract P. betle leaf and synthesize P. betle beads (PBB) to characterize materials and investigate antibacterial efficiencies by disc diffusion assay, batch tests, adsorption isotherms, kinetics, and material reusability. The results demonstrated the successful extraction and synthesis of the materials of P. betle. P. betle powder (PBP) had porous and rough surfaces, whereas PBB had a spherical shape with a coarse surface. The four main chemical elements and functional groups of PBP and PBB were carbon, oxygen, calcium, chlorine, and O-H, C-H, N-H, C-O, respectively. The extraction yield and total phenolic, flavonoid, and tannin contents of P. betle were 11.30%, 201.55 ± 0.31 mg GAE per g, 56.86 ± 0.14 mg RE per g, and 41.76 ± 1.32 mg CE per g, respectively. The six main compounds of eugenol, quercetin, apigenin, kaempferol, ascorbic acid, and hydroxychavicol were detected by HPLC analysis. The results of the disc diffusion assay confirmed antibacterial efficiencies of PBB, and the batch tests examined high antibacterial efficiencies of PBB for 100% on Staphylococcus aureus and Escherichia coli. The adsorption isotherms and kinetics of PBB corresponded to Freundlich model and pseudo-second order kinetic model, and the desorption experiments confirmed the reusability of PBB. Therefore, PBB can be possibly applied for an antibacterial purpose in wastewater treatment systems.

Preparation and Antibacterial Activity of Nano Copper Oxide- Loaded Zeolite 10X

Copper oxide nanosheet-loaded zeolite 10X nanocomposites (CuO-zeolite NCs) were successfully prepared by modifying zeolite 10X with CuSO₄ aqueous solution. The formation of copper oxide nanosheets on the surface of zeolite 10X was observed by SEM. The thickness of CuO nanosheets was about 30–40 nm, and the width ranged from 200 nm to 300 nm. The XRD patterns showed that the new diffraction peaks of copper oxide appeared at 35.6° and 38.8°. According to the XPS results, the Cu 2p_3/2 and Cu 2p_1/2 peaks in CuO-zeolite NC were centered at 934.1 eV and 953.8 eV, which could be attributed to Cu(II). The EDS analysis revealed that the energy spectra of calcium gradually decreased as the copper ion concentration increased during the preparation of CuO-zeolite NCs. Meanwhile, the energy spectra of copper increased gradually, and the highest content of copper in CuO-zeolite NCs reached 22.35 wt.%. The BET surface areas of zeolite 10X and CuO-zeolite NCs were 587 and 363 m²/g, respectively, based on the N₂ adsorption–desorption experiment. The antibacterial activities of CuO-zeolite NC were evaluated using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The antibacterial activities were related to both copper ion content in CuO-zeolite NCs and the particle size of copper oxide. The results showed that nano CuO-loaded zeolite 10X inhibited the activity of E. coli and S. aureus. CuO-zeolite NCs are expected to be further used in antifouling coating.

Ultralight and Ultrathin Electrospun Membranes with Enhanced Air Permeability for Chemical and Biological Protection

With the growing interest in chemical and biological warfare agents (CWAs/BWAs), the focus has shifted toward aerosol protection using protective clothing. However, compared to air-permeable membranes, those with water vapor permeability have been investigated more extensively. Filtering membranes without air permeability have limited practical usage in personal protective suits and masks. In this study, polyacrylonitrile membranes with tightly attached activated carbon and doped copper(II) oxide were prepared via electrospinning. The nanofibers with uniformly controlled diameters and smooth morphologies enable water/air breathability and protection against aerosol (100 nm polystyrene nanobeads similar to SARS-CoV-2) penetration. The uniformly distributed and tightly attached activated carbon and doped copper(II) oxide particles enhance the sorptive performance of the membranes by blocking gaseous CWAs, including soman, nerve chemical agents, and BWAs. Such dual-purpose membranes can be implemented in protective equipment owing to their high performance and easy processing.

In vitro biomineralization potential in simulated wound fluid and antibacterial efficacy of biologically-active glass nanoparticles containing B2O3/ZnO

In the present study, SiO₂-CaO-B₂O₃-ZnO (SCBZ), SiO₂-CaO-B₂O₃ (SCB), SiO₂-CaO-ZnO (SCZ) and SiO₂-CaO (SC) silicate-based glasses were synthesized by the sol-gel method to elucidate the influence of B₂O₃ and ZnO substitution on glass characteristics aiming to further use in wound healing applications. The amorphous nature, spherical-shaped morphology and nano-sized primary particles of glasses were revealed by XRD and SEM analysis. Moreover, investigating the antibacterial activity of glasses against E.coli and S.aureus bacteria indicated the improved antibacterial properties of SCBZ glass against both bacterial strains compared with SCB and SCZ glasses. Assessment of ion release revealed that the incorporation of zinc induces a more stable glass network with a lower tendency to dissolution contrary to the incorporation of boron, which facilitated the dissolution of glass by the formation of more reactive SiOB and BO bonds. Glasses were immersed in Simulated Wound Fluid (SWF) to predict their mineralization susceptibility. Morphological studies and FTIR analysis showed the formation of cauliflower-like hydroxy-carbonated apatite on the surface of SCB and SC glasses after 14 days. In contrast, the presence of Zn in SCBZ and SCZ glasses inhibited the formation of crystalline apatite and induced the deposition of spherical-shaped amorphous apatite. Our study suggests that the co-incorporation of B and Zn in SCBZ glass make this material a potential multifunctional candidate for accelerating the healing of skin wounds.

Antibacterial Activity of Colloidal Copper Nanoparticles against Gram-negative (Escherichia coli and Proteus vulgaris) Bacteria

Antibacterial activities of as-synthesized nanoparticles have gained attention in past few years due to rapid phylogenesis of pathogens developing multi-drug resistance (MDR). Antibacterial activity of Copper nanoparticles (CuNPs) on surrogate pathogenic Gram-negative bacteria Escherichia coli (MTCC No. 739) and Proteus vulgaris (MTCC No. 426) was evaluated under culture conditions. Three sets of colloidal CuNPs were synthesized by chemical reduction method with per batch yield of 0.2 g, 0.3 g and 0.4 g. As-synthesized CuNPs possess identical plasmonic properties and have similar hydrodynamic particle sizes (11-14 nm). Antibacterial activities of CuNPs were evaluated by MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration) tests, cytoplasmic leakage and ROS (reactive oxygen species) assays. MIC and MBC tests revealed dose dependence bactericidal action. Growth curves of E. coli show faster growth inhibition along with higher cytoplasmic leakage than that of P. vulgaris. This might be because of increased membrane permeability of E. coli. CuNPs - microorganism interaction induces oxidative stress generated by ROS (reactive oxygen species). Leakage of cytoplasmic components, loss of membrane permeability and ROS generation are the primary causes of CuNPs induced bacterial cell death. As-synthesized CuNPs exhibiting promising antibacterial activities and could be a promising candidate for novel antibacterial agents.

Modified Alginate Beads with Ethanol Extraction of Cratoxylum formosum and Polygonum odoratum for Antibacterial Activities

Bacteria contaminations in water are concerned as environmental effects including human health, so water treatment is required before use. Although using extracted plant is interesting because of their good chemical compounds for bacterial inhibitions, no study has applied the extracted plant in bead materials for disinfection in wastewater. The current research attempted to extract Cratoxylum formosum and Polygonum odoratum for the synthesis of C. formosum beads (CFB) and P. odoratum beads (POB), and their antibacterial efficiencies were investigated by agar diffusion tests, antibacterial batch tests, adsorption isotherm and kinetics, and material reusability. C. formosum and P. odoratum leaves were ethanol-extracted, and their bead materials (CFB and POB) were synthesized. Furthermore, their characterizations of surface area, chemical compositions, and chemical functional groups were investigated. For field emission scanning electron microscopy and focused ion beam (FESEM-FIB) analysis, CFB and POB had spherical shapes with coarse surfaces. Energy-dispersive X-ray spectrometry (EDX) analysis of CFB and POB illustrated five main chemical compositions, which were carbon (C), oxygen (O), calcium (Ca), chlorine (Cl), and sodium (Na), whereas Fourier transform infrared (FTIR) spectroscopy analysis identified seven main chemical functional groups, which were O-H, C-H, C=O, C=C, N-H, C-O, and C-Cl. Agar diffusion tests confirmed the abilities of CFB and POB to inhibit both Staphylococcus aureus and Escherichia coli, and batch experiments examined high antibacterial efficiencies of CFB of almost 100% on both bacterial types. The adsorption isotherm of CFB corresponded to the Freundlich model, which is related to the physiochemical adsorption process with multilayer or heterogeneous adsorption, and the adsorption kinetics of CFB was correlated to the pseudo-second-order kinetic model, which involved chemisorption relating to physiochemical interaction. Moreover, the desorption experiment confirmed the reusability of CFB. Therefore, CFB is a potential material to possibly apply for disinfection of wastewater.

Silver-Modified β-Cyclodextrin Polymer for Water Treatment: A Balanced Adsorption and Antibacterial Performance

Water pollution caused by organic pollutants and pathogenic microorganism is a critical issue. In this study, we reported a silver-modified β-cyclodextrin polymer (CD-CA/PDA-Ag) used for the removal of dyes and the suppression of microorganisms from water. In order to avoid silver nanoparticles agglomeration, the material was first coated with polydopamine (PDA) on β-cyclodextrin matrix, whose reducing catechol groups subsequently immobilized silver ions in situ to form uniformly dispersed silver nanoparticles. CD-CA/PDA-0.5Ag displayed a high adsorption capacity of methylene blue (535.93 mg/g), which is mainly attributed to electrostatic interactions, host-guest inclusions and π-π bond stacking effects. Furthermore, both diffusion inhibition zone tests and colony formation unit tests were investigated, which showed excellent antimicrobial capability on Escherichia coli (E. coli) and Staphylococcus aureus (S. auerus). Overall, CD-CA/PDA-Ag proved to have an excellent adsorption capacity and antibacterial performance, which provides a great potential in water purification.

Applications of metallic nanomaterials for the treatment of water

Water scarcity is not a novel issue. It has already affected almost every continent in this blue planet. It is driven by two primary sources: increasing demand for fresh water due to the increase in population and overexhaustion of the available freshwater resources. During the past decade, stress has been given to extract fresh, clean and safe potable elixir of life from the bountiful stores of sea water by exploiting various technologies. As nanomaterials are providing promising solutions to almost all our problems, they are again being accessed in order to combat the problem of global freshwater scarcity. Desalination methods have marvellously improved under the impact of nanomaterials. Different metallic nanomaterials are being used to serve this purpose; for example, silver, iron, zinc, titanium dioxide in addition to natural and synthetically derived polymeric bionanomaterials. In the present paper, a brief account of all the metallic nanomaterials which are being used for treatment of water has been provided by thorough investigation on the research done till now. It strives to throw light on various materials and methods which are based on the exploitation of nanotechnology for the treatment of water.

Mechanochemical synthesis of metal oxide nanoparticles

In the last decades, mechanochemical processing has emerged as a sustainable method for the large-scale production of a variety of nanomaterials. In particular, mechanochemical synthesis can afford well-dispersed metal-oxide nanoparticles, which are used in wide-ranging applications including energy storage and conversion, environmental monitoring, or biomedical uses. This article reviews recent progress in the mechanochemical synthesis of metal-oxide nanoparticles, explores reaction mechanisms, and contrasts the influence of chosen process parameters on the properties of end products. The role of choice of reaction pathway, as well as advantages and limitations compared to other synthesis methods are discussed. A prospect for future development of this synthetic method is proposed.

Properties of Inorganic Polymers Based on Ground Waste Concrete Containing CuO and ZnO Nanoparticles

The effect of copper oxide and zinc oxide nanoparticles (NPs) on the mechanical and thermal properties of ground waste concrete inorganic polymers (GWC IPs) has been investigated. NPs are added to GWC IPs at loadings of 0.1, 0.5, 1, and 2% w/w. The phase composition and microstructure of NPs GWC IPs have also been examined using X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscope (SEM/EDS) techniques. Results show that the mechanical properties of GWC IPs are improved (23 MPa) due to addition of NPs (1% ZnO). In particular, GWC IPs embedded with 0.5% CuO and 1% ZnO NPs exhibited relatively improved compressive strength. The addition of NPs decreases the macroporosity and increases the mesoporosity of IPs matrix and decreases relatively the ability of IPs matrix to water absorption. The antimicrobial activity of GWC IPs doped with 0.5 and 1% CuO NPs against E. coli was also determined.

Photoelectrochemical Water-Splitting Using CuO-Based Electrodes for Hydrogen Production: A Review

The cost-effective, robust, and efficient electrocatalysts for photoelectrochemical (PEC) water-splitting has been extensively studied over the past decade to address a solution for the energy crisis. The interesting physicochemical properties of CuO have introduced this promising photocathodic material among the few photocatalysts with a narrow bandgap. This photocatalyst has a high activity for the PEC hydrogen evolution reaction (HER) under simulated sunlight irradiation. Here, the recent advancements of CuO-based photoelectrodes, including undoped CuO, doped CuO, and CuO composites, in the PEC water-splitting field, are comprehensively studied. Moreover, the synthesis methods, characterization, and fundamental factors of each classification are discussed in detail. Apart from the exclusive characteristics of CuO-based photoelectrodes, the PEC properties of CuO/2D materials, as groups of the growing nanocomposites in photocurrent-generating devices, are discussed in separate sections. Regarding the particular attention paid to the CuO heterostructure photocathodes, the PEC water splitting application is reviewed and the properties of each group such as electronic structures, defects, bandgap, and hierarchical structures are critically assessed.

Multistage Extraction of Star Anise and Black Pepper Derivatives for Antibacterial, Antioxidant, and Anticancer Activity

Recently, natural resources have attracted considerable interest for their applications in food security and human health problems. Traditional natural spices, such as star anise and black pepper, played important roles in the pharmaceutical and food industries due to their strong pharmacological activity, antioxidant potential and rare complications. In order to achieve biomasses from the natural product with multiple bioactivities, we developed the multistage extraction method to extract and separate various bioactive compounds from these natural plants. Our work demonstrated that various bioactive-rich extractives were achieved using steam distilled- or oxidative-extraction methods with high extraction yields and purity. Furthermore, the extractives in each step can be used not only as bioactive compounds, but also as a resource to further prepare different derivatives during the next extractive step, providing biomass-saving to a great extent. The extractives obtained with high yields and purities (>82%) were identified by ¹H NMR, ¹³C NMR, FTIR, UV-vis, fluorescence spectroscopy, and high-performance liquid chromatography (HPLC). Moreover, these biomasses display potent antibacterial activities against some types of microorganisms such as S.aureus, S.pyogenes, E.coli, and S.typhi with a lowest MIC of 400 μg/ml for the development of antibacterial agents, significant antioxidant activity as the natural antioxidant for enhancing food shelf-life, and excellent anticancer activity that induces significant cancer cell apoptosis. This work showed the different multistage extracts from natural products, which enable them to be applied in the fields of the pharmaceutical industry and the food industry.

The use of antimicrobial-impregnated fabrics in health services: an integrative review

Objective:

to analyze evidence concerning the feasibility of antimicrobial-impregnated fabrics in preventing and controlling microbial transmission in health services.

Method:

an integrative review using the following databases: MEDLINE (via PubMed), Web of Science, Cumulative Index to Nursing and Allied Health Literature (CINAHL), Scopus, and Latin American and Caribbean Health Sciences Literature (LILACS), regardless of language and date of publication. Seven studies were included in the analysis to verify the types of fabrics and substances used to impregnate the fabrics, applicability in health services, and decrease in microbial load.

Results:

silver nanoparticles and copper oxide are the main antimicrobial substances used to impregnate the fabrics. The patients’ use of these fabrics, such as in bed and bath linens and clothing, was more effective in reducing antimicrobial load than in health workers’ uniforms.

Conclusion:

the use of these antimicrobial-impregnated textiles, especially by patients, is a viable alternative to prevent and control microbial transmission in health services. Implementing these fabrics in health workers’ uniforms requires further studies, however, to verify its effectiveness in decreasing microbial load in clinical practice.

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

The investigation of novel nanoparticles with antimicrobial activity has grown in recent years due to the increased incidence of nosocomial infections occurring during hospitalization and food poisoning derived from foodborne pathogens. Antimicrobial agents are necessary in various fields in which biological contamination occurs. For example, in food packaging they are used to control food contamination by microbes, in the medical field the microbial agents are important for reducing the risk of contamination in invasive and routine interventions, and in the textile industry, they can limit the growth of microorganisms due to sweat. The combination of nanotechnology with materials that have an intrinsic antimicrobial activity can result in the development of novel antimicrobial substances. Specifically, metal-based nanoparticles have attracted much interest due to their broad effectiveness against pathogenic microorganisms due to their high surface area and high reactivity. The aim of this review was to explore the state-of-the-art in metal-based nanoparticles, focusing on their synthesis methods, types, and their antimicrobial action. Different techniques used to synthesize metal-based nanoparticles were discussed, including chemical and physical methods and "green synthesis" methods that are free of chemical agents. Although the most studied nanoparticles with antimicrobial properties are metallic or metal-oxide nanoparticles, other types of nanoparticles, such as superparamagnetic iron-oxide nanoparticles and silica-releasing systems also exhibit antimicrobial properties. Finally, since the quantification and understanding of the antimicrobial action of metal-based nanoparticles are key topics, several methods for evaluating in vitro antimicrobial activity and the most common antimicrobial mechanisms (e.g., cell damage and changes in the expression of metabolic genes) were discussed in this review.

Metal-Based Nanoparticles as Antimicrobial Agents: An Overview

Metal-based nanoparticles have been extensively investigated for a set of biomedical applications. According to the World Health Organization, in addition to their reduced size and selectivity for bacteria, metal-based nanoparticles have also proved to be effective against pathogens listed as a priority. Metal-based nanoparticles are known to have non-specific bacterial toxicity mechanisms (they do not bind to a specific receptor in the bacterial cell) which not only makes the development of resistance by bacteria difficult, but also broadens the spectrum of antibacterial activity. As a result, a large majority of metal-based nanoparticles efficacy studies performed so far have shown promising results in both Gram-positive and Gram-negative bacteria. The aim of this review has been a comprehensive discussion of the state of the art on the use of the most relevant types of metal nanoparticles employed as antimicrobial agents. A special emphasis to silver nanoparticles is given, while others (e.g., gold, zinc oxide, copper, and copper oxide nanoparticles) commonly used in antibiotherapy are also reviewed. The novelty of this review relies on the comparative discussion of the different types of metal nanoparticles, their production methods, physicochemical characterization, and pharmacokinetics together with the toxicological risk encountered with the use of different types of nanoparticles as antimicrobial agents. Their added-value in the development of alternative, more effective antibiotics against multi-resistant Gram-negative bacteria has been highlighted.

Effect of NaOH concentration on antibacterial activities of Cu nanoparticles and the antibacterial mechanism

A series of Cu nanoparticles (NPs) have been prepared by a facile hydrothermal method at 180 °C using different concentrations of NaOH solutions and characterized by XRD, SEM, TEM and FT-IR spectra. Their antibacterial activities were assessed by means of Gram-positive S. aureus and Gram-negative E. coli bacteria, where various dosages (3, 5, 7, 10 mg) of the antibacterial agents were applied, and compared with that of the commercial CuSO₄ salt. The antibacterial mechanism was explored based on series of control experiments. The results show that the NaOH concentration affects the crystallinity, crystal size and surface hydroxyl content of the Cu NPs, which significantly influence the antibacterial activities. Compared to the commercial CuSO₄ salt, the four Cu samples prepared using no <4 mol L^-1 of NaOH display excellent antibacterial activities with low concentrations of copper leachates, which is great beneficial to the practical applications. The experimental results support that the highly reactive and soluble copper species in the antibacterial system of the Cu NPs is a Cu (II)-peptide complex, but not free Cu²⁺ ions.