Recent developments in liposomes, microparticles and nanoparticles for protein and peptide drug delivery

A convenient method for the relative and absolute quantification of lipid components in liposomes by 1H- and 31P NMR-spectroscopy

OBJECTIVE

Liposomes are promising delivery systems for pharmaceutical applications and have been used in medicine in the recent past. Preparation of liposomes requires reliable characterization and quantification of the phospholipid components for which the traditional cumbersome molybdate method is used frequently. The objective was to improve relative and absolute quantification of lipid components from liposomes.

METHODS

A reliable method for quantification of lipid composition in liposome formulations in the 1-10 μmol range with 1H- and 31P NMR spectroscopy at 600 MHz has been developed. The method is based on three crystalline small-molecule standards (Ph3PO4, (Tol)3PO4, and Ph3PO) in CDCl3.

RESULTS

Excellent calibration linearity and chemical stability of the standards was observed. The method was tested in blind fashion on liposomes containing POPC, PEG-ceramide and a pH-sensitive trans-aminocyclohexanol-based amphiphile (TACH).1 Relative quantification (percentage of components) as well as determination of absolute lipid amount was possible with excellent reproducibility with an average error of 5%. Quantification (triplicate) was accomplished in 15 min based on 1H NMR and in 1 h based on 31P NMR. Very little change in mixture composition was observed over multiple preparative steps.

CONCLUSION

Liposome preparations containing POPC, POPE, DOPC, DPPC, TACH, and PEG-ceramide can be reliably characterized and quantified by 1H NMR and 31P NMR spectroscopy at 600 MHz in the μmol range.

Polydopamine-Coated Polymer Nanofibers for In Situ Protein Loading and Controlled Release

Nanofibrous polymeric materials, combined with protein therapeutics, play a significant role in biomedical and pharmaceutical applications. However, the upload of proteins into nanofibers with a high yield and controlled release has been a challenging issue. Here, we report the in situ loading of a model protein (bovine serum albumin) into hydrophilic poly(vinyl alcohol) nanofibers via ice-templating, with a 100% protein drug loading efficiency. These protein-loaded nanofibers were further coated by polydopamine in order to improve the nanofiber stability and achieve a controlled protein release. The mass ratio between poly(vinyl alcohol) and bovine serum albumin influenced the percentage of proteins in composite nanofibers and fiber morphology. More particles and less nanofibers were formed with an increasing percentage of bovine serum albumin. By varying the coating conditions, it was possible to produce a uniform polydopamine coating with tunable thickness, which acted as an additional barrier to reduce burst release and achieve a more sustained release profile.

Inhibition of protein-protein interactions using biodegradable depsipeptide nanoassemblies

Although peptides notoriously have poor intrinsic pharmacokinetic properties, it is well-known that nanostructures with excellent pharmacokinetic properties can be designed. Noticing that peptide inhibitors are generally nonpolar, here, we consolidate the peptide inhibitor targeting intracellular protein-protein interactions (PPIs) as an integral part of biodegradable self-assembled depsipeptide nanostructures (SdPNs). Because the peptide inhibitor has the dual role of PPI inhibition and self-assembly in this design, problems associated with the poor pharmacokinetics of peptides and encapsulation/entrapment processes can be overcome. Optimized SdPNs displayed better tumor targeting and PPI inhibition properties than the comparable small molecule inhibitor in vivo. Kinetics of PPI inhibition for SdPNs were gradual and controllable in contrast to the rapid inhibition kinetics of the small molecule. Because SdPN is modular, any appropriate peptide inhibitor can be incorporated into the platform without concern for the poor pharmacokinetic properties of the peptide.

Recent Advances in Formulations for Long-Acting Delivery of Therapeutic Peptides

Recent preclinical and clinical studies have focused on the active area of therapeutic peptides due to their high potency, selectivity, and specificity in treating a broad range of diseases. However, therapeutic peptides suffer from multiple disadvantages, such as limited oral bioavailability, short half-life, rapid clearance from the body, and susceptibility to physiological conditions (e.g., acidic pH and enzymolysis). Therefore, high peptide dosages and dose frequencies are required for effective patient treatment. Recent innovations in pharmaceutical formulations have substantially improved therapeutic peptide administration by providing the following advantages: long-acting delivery, precise dose administration, retention of biological activity, and improvement of patient compliance. This review discusses therapeutic peptides and challenges in their delivery and explores recent peptide delivery formulations, including micro/nanoparticles (based on lipids, polymers, porous silicon, silica, and stimuli-responsive materials), (stimuli-responsive) hydrogels, particle/hydrogel composites, and (natural or synthetic) scaffolds. This review further covers the applications of these formulations for prolonged delivery and sustained release of therapeutic peptides and their impact on peptide bioactivity, loading efficiency, and (in vitro/in vivo) release parameters.

Peptides Targeting HER2-Positive Breast Cancer Cells and Applications in Tumor Imaging and Delivery of Chemotherapeutics

Breast cancer represents the most common cancer type and one of the major leading causes of death in the female worldwide population. Overexpression of HER2, a transmembrane glycoprotein related to the epidermal growth factor receptor, results in a biologically and clinically aggressive breast cancer subtype. It is also the primary driver for tumor detection and progression and, in addition to being an important prognostic factor in women diagnosed with breast cancer, HER2 is a widely known therapeutic target for drug development. The aim of this review is to provide an updated overview of the main approaches for the diagnosis and treatment of HER2-positive breast cancer proposed in the literature over the past decade. We focused on the different targeting strategies involving antibodies and peptides that have been explored with their relative outcomes and current limitations that need to be improved. The review also encompasses a discussion on targeted peptides acting as probes for molecular imaging. By using different types of HER2-targeting strategies, nanotechnology promises to overcome some of the current clinical challenges by developing novel HER2-guided nanosystems suitable as powerful tools in breast cancer imaging, targeting, and therapy.

Investigation and Comparison of Active and Passive Encapsulation Methods for Loading Proteins into Liposomes

In this work, four different active encapsulation methods, microfluidic (MF), sonication (SC), freeze-thawing (FT), and electroporation (EP), were investigated to load a model protein (bovine serum albumin-BSA) into neutral liposomes made from 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC):cholesterol (Chol) and charged liposomes made from DSPC:Chol:Dioleoyl-3-trimethylammonium propane (DOTAP), DSPC:Chol:1,2-dioleoyl-sn-glycero-3-phospho-L-serine (DOPS), and DSPC:Chol:phosphatidylethanolamine (PE). The aim was to increase the protein encapsulation efficiency (EE%) by keeping the liposome size below 200 nm and the PDI value below 0.7, which warrants a nearly monodisperse preparation. Electroporation (100 V) yielded the best results in terms of EE%, with a dramatic increase in liposome size (>600 nm). The FT active-loading method, either applied to neutral or charged liposomes, allowed for obtaining suitable EE%, keeping the liposome size range below 200 nm with a suitable PDI index. Cationic liposomes (DSPC:Chol:DOTAP) loaded with the FT active method showed the best results in terms of EE% (7.2 ± 0.8%) and size (131.2 ± 11.4 nm, 0.140 PDI). In vitro release of BSA from AM neutral and charged liposomes resulted slower compared to PM liposomes and was affected by incubation temperature (37 °C, 4 °C). The empty charged liposomes tested for cell viability on Human Normal Dermal Fibroblast (HNDF) confirmed their cytocompatibility also at high concentrations (1010 particles/mL) and cellular uptake at 4 °C and 37 °C. It can be concluded that even if both microfluidic passive and active methods are more easily transferable to an industrial scale, the FT active-loading method turned out to be the best in terms of BSA encapsulation efficiencies, keeping liposome size below 200 nm.

LDPE and PLA Active Food Packaging Incorporated with Lemon by-Products Extract: Preparation, Characterization and Effectiveness to Delay Lipid Oxidation in Almonds and Beef Meat

Low-density polyethylene-based packaging with 4% lemon extract (LDPE/4LE) and two polylactic-based (PLA) packaging materials with 4% and 6% lemon extract (PLA/PEG/4LE and PLA/6LE) were produced. O₂ and water permeability tests were performed, the total and individual phenolic compounds content were measured, and the films' antioxidant activities were determined. The films' ability to delay lipid oxidation was tested in two model foods: almonds, packaged with LDPE/4LE, PLA/4LE and PLA/6LE for a maximum period of 60 days at 40 °C (accelerated assay); and beef meat, packaged with the PLA/6LE for a maximum period of 11 days at 4 °C. The LE improved the WVP in all of the active films by 33%, 20% and 60% for the LDPE/4LE, PLA/4LE and PLA/6LE films, respectively. At the end of 10 days, the migration of phenolic compounds through the PLA films was measured to be 142.27 and 114.9 μg/dm² for the PLA/4LE and PLA/6LE films, respectively, and was significantly higher than phenolic compounds migration measured for the LDPE/4LE (15.97 μg/dm²). Naringenin, apigenin, ferulic acid, eriocitrin, hesperidin and 4-hydroxybenzoic acid were the main identified compounds in the PLA, but only 4-hydroxybenzoic acid, naringenin and p-coumaric acid were identified in the LDPE films. Regarding the films' ability to delay lipid oxidation, LDPE/4LE presented the best results, showing a capacity to delay lipid oxidation in almonds for 30 days. When applied to raw beef meat, the PLA/6LE packaging was able to significantly inhibit lipid oxidation for 6 days, and successfully inhibited total microorganisms' growth until the 8th day of storage.

Molecular and cellular level characterization of cytoskeletal mechanics using a quartz crystal microbalance

A quartz crystal microbalance (QCM) is an instrument that has the ability to measure nanogram-level changes in mass on a quartz sensor and is traditionally used to probe surface interactions and assembly kinetics of synthetic systems. The addition of dissipation monitoring (QCM-D) facilitates the study of viscoelastic systems, such as those relevant to molecular and cellular mechanics. Due to real-time recording of frequency and dissipation changes and single protein-level precision, the QCM-D is effective in interrogating the viscoelastic properties of cell surfaces and in vitro cellular components. However, few studies focus on the application of this instrument to cytoskeletal systems, whose dynamic parts create interesting emergent mechanics as ensembles that drive essential tasks, such as division and motility. Here, we review the ability of the QCM-D to characterize key kinetic and mechanical features of the cytoskeleton through in vitro reconstitution and cellular assays and outline how QCM-D studies can yield insightful mechanical data alone and in tandem with other biophysical characterization techniques.

Therapeutic Potential of Controlled Delivery Systems in Asthma: Preclinical Development of Flavonoid-Based Treatments

Asthma is a chronic disease with increasing prevalence and incidence, manifested by allergic inflammatory reactions, and is life-threatening for patients with severe disease. Repetitive challenges with the allergens and limitation of treatment efficacy greatly dampens successful management of asthma. The adverse events related to several drugs currently used, such as corticosteroids and β-agonists, and the low rigorous adherence to preconized protocols likely compromises a more assertive therapy. Flavonoids represent a class of natural compounds with extraordinary antioxidant and anti-inflammatory properties, with their potential benefits already demonstrated for several diseases, including asthma. Advanced technology has been used in the pharmaceutical field to improve the efficacy and safety of drugs. Notably, there is also an increasing interest for the application of these techniques using natural products as active molecules. Flavones, flavonols, flavanones, and chalcones are examples of flavonoid compounds that were tested in controlled delivery systems for asthma treatment, and which achieved better treatment results in comparison to their free forms. This review aims to provide a comprehensive understanding of the development of novel controlled delivery systems to enhance the therapeutic potential of flavonoids as active molecules for asthma treatment.

Recombinant Protein Micelles to Block Transduction by SARS-CoV-2 Pseudovirus

The continuing emergence of variants of the SARS-CoV-2 virus requires the development of modular molecular therapies. Here, we engineered a recombinant amphiphilic protein, oleosin, to spontaneously self-assemble into multivalent micellar nanostructures which can block the Spike S1 protein of SARS-CoV-2 pseudoviruses (PVs). Short recombinant proteins like oleosin can be formulated more easily than antibodies and can be functionalized with precision through genetic engineering. We cloned S1-binding mini-protein genes called LCBx, previously designed by David Baker's laboratory (UW Seattle), to the N-terminus of oleosin, expressing Oleo-LCBx proteins in E. coli. These proteins largely formed 10-100 nm micelles as verified by dynamic light scattering. Two proteins, Oleo-LCB1 and Oleo-LCB3, were seen to completely and irreversibly block transduction by both wild-type and delta variant PVs into 293T-hsACE2 cells at 10 μM. Presented in multivalent micelles, these proteins reduced transduction by PVs down to a functional protein concentration of 5 nM. Additionally, Oleo-LCB1 micelles outperformed corresponding synthetic LCB1 mini-proteins in reducing transduction by PVs. Tunable aqueous solubility of recombinant oleosin allowed incorporation of peptides/mini-proteins at high concentrations within micelles, thus enhancing drug loading. To validate the potential multifunctionality of the micelles, we showed that certain combinations of Oleo-LCB1 and Oleo-LCB3 performed much better than the individual proteins at the same concentration. These micelles, which we showed to be non-toxic to human cells, are thus a promising step toward the design of modular, multifunctional therapeutics that could bind to and inactivate multiple receptors and proteins necessary for the infection of the SARS-CoV-2 virus.

Protein-based nanomaterials: a new tool for targeted drug delivery

Protein nanomaterials are well-defined, hollow protein nanoparticles comprised of virus capsids, virus-like particles, ferritin, heat shock proteins, chaperonins and many more. Protein-based nanomaterials are formed by the self-assembly of protein subunits and have numerous desired properties as drug-delivery vehicles, including being optimally sized for endocytosis, nontoxic, biocompatible, biodegradable and functionalized at three separate interfaces (external, internal and intersubunit). As a result, protein nanomaterials have been intensively investigated as functional entities in bionanotechnology, including drug delivery, nanoreactors and templates for organic and inorganic nanomaterials. Several variables influence efficient administration, particularly active targeting, cellular uptake, the kinetics of the release and systemic elimination. This review examines the wide range of medicines, loading/release processes, targeted therapies and treatment effectiveness.

Applications of nanomaterials in COVID-19 pandemic

The novel coronavirus 2019 (COVID-19) pandemic represents one of the biggest global health threats in the last two decades, so researchers around the world are searching for solutions and treatments for COVID-19. At the time of writing, there are no specific drugs that have demonstrated suitable effectiveness in treating COVID-19. The current challenge involves designing tools for the prevention, rapid and accurate diagnosis, drug delivery, and effective treatment of this novel coronavirus. In this short review, we discuss how nanotechnology offers new ways to combat COVID-19, and how nanomaterials can be applied to control the COVID-19 outbreak. We also summarize relevant studies regarding the use of nanomaterials for preventing viral spread, preparing vaccines, and diagnosing coronavirus, as well as studies that show how nanoparticles can be used as drug delivery systems for the treatment of viral infections. Research on nanotechnology-based diagnosis, drug delivery, and antiviral therapy is currently in the early stages. However, the unique chemical properties of some nanomaterials highlight the broad prospect of nanomaterials in the future, and we propose that they will play an important role in the fight against COVID-19.

Current trends and future perspectives of nanomedicine for the management of colon cancer

Colon cancer (CC) kills countless people every year throughout the globe. It persists as one of the highly lethal diseases to be treated because the overall survival rate for CC is meagre. Early diagnosis and efficient treatments are two of the biggest hurdles in the fight against cancer. In the present work, we will review thriving strategies for CC targeted drug delivery and critically explain the most recent progressions on emerging novel nanotechnology-based drug delivery systems. Nanotechnology-based animal and human clinical trial studies targeting CC are discussed. Advancements in nanotechnology-based drug delivery systems intended to enhance cellular uptake, improved pharmacokinetics and effectiveness of anticancer drugs have facilitated the powerful targeting of specific agents for CC therapy. This review provides insight into current progress and future opportunities for nanomedicines as potential curative targets for CC treatment. This information could be used as a platform for the future expansion of multi-functional nano constructs for CC's advanced detection and functional drug delivery.

The impact of calcium phosphate on FITC-BSA loading of sonochemically prepared PLGA nanoparticles for inner ear drug delivery elucidated by two different fluorimetric quantification methods

Although therapeutically active proteins are highly efficacious, their content in protective nanoparticles is often too low to elicit adequate plasma levels. A strategy to increase protein loading is the in-situ generation of calcium phosphate as a protein adsorbent. To verify this approach, a highly sensitive and reliable fluorimetric method for quantification of incorporated fluorescein-labelled bovine serum albumin (FITC-BSA) as a model protein drug was developed. Dequenching the fluorescein label by pronase E, which digests the protein backbone, and dissolving the nanoparticle matrix in acetonitrile enabled FITC-BSA quantification in the nanogram per milliliter range. This test was confirmed by a second assay involving alkaline hydrolysis of FITC-BSA and the matrix. Nanoparticles prepared with calcium phosphate contained 40 µg FITC-BSA/mg and nanoparticles without calcium phosphate only 15 µg FITC-BSA/mg, representing a 2.7-fold increase in model protein loading. In this work the nanoparticle preparation procedure was optimized in terms of size for administration in the inner ear, but the range of applications is not limited.

Nanoparticles for Magnetic Heating: When Two (or More) Is Better Than One

The increasing use of magnetic nanoparticles as heating agents in biomedicine is driven by their proven utility in hyperthermia therapeutic treatments and heat-triggered drug delivery methods. The growing demand of efficient and versatile nanoheaters has prompted the creation of novel types of magnetic nanoparticle systems exploiting the magnetic interaction (exchange or dipolar in nature) between two or more constituent magnetic elements (magnetic phases, primary nanoparticles) to enhance and tune the heating power. This process occurred in parallel with the progress in the methods for the chemical synthesis of nanostructures and in the comprehension of magnetic phenomena at the nanoscale. Therefore, complex magnetic architectures have been realized that we classify as: (a) core/shell nanoparticles; (b) multicore nanoparticles; (c) linear aggregates; (d) hybrid systems; (e) mixed nanoparticle systems. After a general introduction to the magnetic heating phenomenology, we illustrate the different classes of nanoparticle systems and the strategic novelty they represent. We review some of the research works that have significantly contributed to clarify the relationship between the compositional and structural properties, as determined by the synthetic process, the magnetic properties and the heating mechanism.

Protein and peptide delivery to lungs by using advanced targeted drug delivery

The challenges and difficulties associated with conventional drug delivery systems have led to the emergence of novel, advanced targeted drug delivery systems. Therapeutic drug delivery of proteins and peptides to the lungs is complicated owing to the large size and polar characteristics of the latter. Nevertheless, the pulmonary route has attracted great interest today among formulation scientists, as it has evolved into one of the important targeted drug delivery platforms for the delivery of peptides, and related compounds effectively to the lungs, primarily for the management and treatment of chronic lung diseases. In this review, we have discussed and summarized the current scenario and recent developments in targeted delivery of proteins and peptide-based drugs to the lungs. Moreover, we have also highlighted the advantages of pulmonary drug delivery over conventional drug delivery approaches for peptide-based drugs, in terms of efficacy, retention time and other important pharmacokinetic parameters. The review also highlights the future perspectives and the impact of targeted drug delivery on peptide-based drugs in the coming decade.

Nanomedicine as a promising strategy for the theranostics of infectious diseases

Infectious diseases caused by bacteria, viruses, and fungi and their global spread pose a great threat to human health. The 2019 World Health Organization report predicted that infection-related mortality will be similar to cancer mortality by 2050. Particularly, the global cumulative numbers of the recent outbreak of coronavirus disease (COVID-19) have reached 110.7 million cases and over 2.4 million deaths as of February 23, 2021. Moreover, the crisis of these infectious diseases exposes the many problems of traditional diagnosis, treatment, and prevention, such as time-consuming and unselective detection methods, the emergence of drug-resistant bacteria, serious side effects, and poor drug delivery. There is an urgent need for rapid and sensitive diagnosis as well as high efficacy and low toxicity treatments. The emergence of nanomedicine has provided a promising strategy to greatly enhance detection methods and drug treatment efficacy. Owing to their unique optical, magnetic, and electrical properties, nanoparticles (NPs) have great potential for the fast and selective detection of bacteria, viruses, and fungi. NPs exhibit remarkable antibacterial activity by releasing reactive oxygen species and metal ions, exerting photothermal effects, and causing destruction of the cell membrane. Nano-based delivery systems can further improve drug permeability, reduce the side effects of drugs, and prolong systemic circulation time and drug half-life. Moreover, effective drugs against COVID-19 are still lacking. Recently, nanomedicine has shown great potential to accelerate the development of safe and novel anti-COVID-19 drugs. This article reviews the fundamental mechanisms and the latest developments in the treatment and diagnosis of bacteria, viruses, and fungi and discusses the challenges and perspectives in the application of nanomedicine.

Hyaluronic Acid-Based Nanoparticles for Protein Delivery: Systematic Examination of Microfluidic Production Conditions

Hyaluronic acid-based nanoparticles (HA NPs) can be used to deliver a protein cargo to cells overexpressing HA receptors such as CD44 since they combine the low toxicity of the carrier and the retention of the protein integrity with the receptor-mediated internalization. HA properties play a crucial but sometimes unclear role in managing the formation and stability of the meshwork, cell interactions, and ultimately the protein entrapment efficacy. Nowadays, microfluidic is an innovative technology that allows to overcome limits linked to the NPs production, guaranteeing reproducibility and control of individual batches. Taking advantage of this technique, in this research work, the role of HA weight average molecular weight (Mw) in NPs formation inside a microfluidic device has been specifically faced. Based on the relationship between polymer Mw and solution viscosity, a methodological approach has been proposed to ensure critical quality attributes (size of 200 nm, PDI ≤ 0.3) to NPs made by HA with different Mw (280, 540, 710 and 820 kDa). The feasibility of the protein encapsulation was demonstrated by using Myoglobin, as a model neutral protein, with an encapsulation efficiency always higher than 50%. Lastly, all NPs samples were successfully internalized by CD44-expressing cells.

Lipid Self-Assemblies under the Atomic Force Microscope

Lipid model membranes are important tools in the study of biophysical processes such as lipid self-assembly and lipid–lipid interactions in cell membranes. The use of model systems to adequate and modulate complexity helps in the understanding of many events that occur in cellular membranes, that exhibit a wide variety of components, including lipids of different subfamilies (e.g., phospholipids, sphingolipids, sterols…), in addition to proteins and sugars. The capacity of lipids to segregate by themselves into different phases at the nanoscale (nanodomains) is an intriguing feature that is yet to be fully characterized in vivo due to the proposed transient nature of these domains in living systems. Model lipid membranes, instead, have the advantage of (usually) greater phase stability, together with the possibility of fully controlling the system lipid composition. Atomic force microscopy (AFM) is a powerful tool to detect the presence of meso- and nanodomains in a lipid membrane. It also allows the direct quantification of nanomechanical resistance in each phase present. In this review, we explore the main kinds of lipid assemblies used as model membranes and describe AFM experiments on model membranes. In addition, we discuss how these assemblies have extended our knowledge of membrane biophysics over the last two decades, particularly in issues related to the variability of different model membranes and the impact of supports/cytoskeleton on lipid behavior, such as segregated domain size or bilayer leaflet uncoupling.

Nanocarrier-Mediated Topical Insulin Delivery for Wound Healing

Wound care has been clinically demanding due to inefficacious treatment that represents an economic burden for healthcare systems. In Europe, approximately 7 million people are diagnosed with untreated wounds, leading to a cost between 6.000€ and 10.000€ per patient/year. In the United States of America, 1.5 million people over 65 years old suffer from chronic wounds. A promising therapeutic strategy is the use of exogenous growth factors because they are decreased at the wound site, limiting the recovery of the skin. Insulin is one of the cheapest growth factors in the market able to accelerate the re-epithelialization and stimulate angiogenesis and cell migration. However, the effectiveness of topical insulin in wound healing is hampered by the proteases in the wound bed. The encapsulation into nanoparticles improves its stability in the wound, providing adhesion to the mucosal surface and allowing its sustained release. The aim of this review is to perform a standing point about a promising strategy to treat different types of wounds by the topical delivery of insulin-loaded nanocarriers.

Nuclear Magnetic Resonance Spectroscopy: A Multifaceted Toolbox to Probe Structure, Dynamics, Interactions, and Real-Time In Situ Release Kinetics in Peptide-Liposome Formulations

Liposomal formulations represent attractive biocompatible and tunable drug delivery systems for peptide drugs. Among the tools to analyze their physicochemical properties, nuclear magnetic resonance (NMR) spectroscopy, despite being an obligatory technique to characterize molecular structure and dynamics in chemistry as well as in structural biology, yet appears to be rather sparsely used to study drug-liposome formulations. In this work, we exploited several facets of liquid-state NMR spectroscopy to characterize liposomal delivery systems for the apelin-derived K14P peptide and K14P modified by Nα-fatty acylation. Various liposome compositions and preparation modes were analyzed. Using NMR, in combination with cryo-electron microscopy and dynamic light scattering, we determined structural, dynamic, and self-association properties of these peptides in solution and probed their interactions with liposomes. Using ³¹P and ¹H NMR, we characterized membrane fluidity and thermotropic phase transitions in empty and loaded liposomes. Based on diffusion and ¹H NMR experiments, we localized and quantified peptides with respect to the interior/exterior of liposomes and changes over time and upon thermal treatments. Finally, we assessed the release kinetics of several solutes and compared various formulations. Taken together, this work shows that NMR has the potential to assist the design of peptide/liposome systems and more generally drug delivery systems.

Droplet Microfluidic Optimisation Using Micropipette Characterisation of Bio-Instructive Polymeric Surfactants

Droplet microfluidics can produce highly tailored microparticles whilst retaining monodispersity. However, these systems often require lengthy optimisation, commonly based on a trial-and-error approach, particularly when using bio-instructive, polymeric surfactants. Here, micropipette manipulation methods were used to optimise the concentration of bespoke polymeric surfactants to produce biodegradable (poly(d,l-lactic acid) (PDLLA)) microparticles with unique, bio-instructive surface chemistries. The effect of these three-dimensional surfactants on the interfacial tension of the system was analysed. It was determined that to provide adequate stabilisation, a low level (0.1% (w/v)) of poly(vinyl acetate-co-alcohol) (PVA) was required. Optimisation of the PVA concentration was informed by micropipette manipulation. As a result, successful, monodisperse particles were produced that maintained the desired bio-instructive surface chemistry.

Drug Delivery to the Bone Microenvironment Mediated by Exosomes: An Axiom or Enigma

The increasing incidence of bone-related disorders is causing a burden on the clinical scenario. Even though bone is one of the tissues that possess tremendous regenerative potential, certain bone anomalies need therapeutic intervention through appropriate delivery of a drug. Among several nanosystems and biologics that offer the potential to contribute towards bone healing, the exosomes from the class of extracellular vesicles are outstanding. Exosomes are extracellular nanovesicles that, apart from the various advantages, are standing out of the crowd for their ability to conduct cellular communication. The internal cargo of the exosomes is leading to its potential use in therapeutics. Exosomes are being unraveled in terms of the mechanism as well as application in targeting various diseases and tissues. Through this review, we have tried to understand and review all that is already established and the gap areas that still exist in utilizing them as drug delivery vehicles targeting the bone. The review highlights the potential of the exosomes towards their contribution to the drug delivery scenario in the bone microenvironment. A comparison of the pros and cons of exosomes with other prevalent drug delivery systems is also done. A section on the patents that have been generated so far from this field is included.

Targeted nanotherapeutics in the prophylaxis and treatment of thrombosis

Currently available anti-thrombotic therapy for the prophylaxis and treatment of arterial and venous thrombosis includes intravenous administration of anti-thrombotic drugs which lead to severe bleeding risks such as cerebral hemorrhage and stroke. Targeting approaches that utilize nanosystems to reach the thrombus sites are emerging to increase the local effect of anti-thrombotic drugs, as well as to decrease these severe bleeding complications by diminishing the systemic availability of these drugs. This review emphasizes the emerging targeted nanomedicines (liposomes, micelles, polymeric nanoparticles, material bases nanoparticles and other biological vectors) for the prophylaxis and treatment of thrombotic events as well as multifunctional nanomedicines for theranostic applications. Nanomedicine offers a promising platform for a smart, safe, and effective approach for the management of thrombosis.

Cancer Vaccines, Adjuvants, and Delivery Systems

Vaccination was first pioneered in the 18th century by Edward Jenner and eventually led to the development of the smallpox vaccine and subsequently the eradication of smallpox. The impact of vaccination to prevent infectious diseases has been outstanding with many infections being prevented and a significant decrease in mortality worldwide. Cancer vaccines aim to clear active disease instead of aiming to prevent disease, the only exception being the recently approved vaccine that prevents cancers caused by the Human Papillomavirus. The development of therapeutic cancer vaccines has been disappointing with many early cancer vaccines that showed promise in preclinical models often failing to translate into efficacy in the clinic. In this review we provide an overview of the current vaccine platforms, adjuvants and delivery systems that are currently being investigated or have been approved. With the advent of immune checkpoint inhibitors, we also review the potential of these to be used with cancer vaccines to improve efficacy and help to overcome the immune suppressive tumor microenvironment.

Positively Charged Nanoparticle Delivery of n-Butylidenephthalide Enhances Antitumor Effect in Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) is the second and sixth leading cause of cancer death in men and woman in 185 countries statistics, respectively. n-Butylidenephthalide (BP) has shown anti-HCC activity, but it also has an unstable structure that decreases its potential antitumor activity. The aim of this study was to investigate the cell uptake, activity protection, and antitumor mechanism of BP encapsulated in the novel liposome LPPC in HCC cells. BP/LPPC exhibited higher cell uptake and cytotoxicity than BP alone, and combined with clinical drug etoposide (VP-16), BP/LPPC showed a synergistic effect against HCC cells. Additionally, BP/LPPC increased cell cycle regulators (p53, p-p53, and p21) and decreased cell cycle-related proteins (Rb, p-Rb, CDK4, and cyclin D1), leading to cell cycle arrest at the G₀/G₁ phase in HCC cells. BP/LPPC induced cell apoptosis through activation of both the extrinsic (Fas-L and Caspase-8) and intrinsic (Bax and Caspase-9) apoptosis pathways and activated the caspase cascade to trigger HCC cell death. In conclusion, the LPPC complex improved the antitumor activity of BP in terms of cytotoxicity, cell cycle regulation and cell apoptosis, and BP/LPPC synergistically inhibited cell growth during combination treatment with VP-16 in HCC cells. Therefore, BP/LPPC is potentially a good candidate for clinical drug development or for use as an adjuvant for clinical drugs as a combination therapy for hepatocellular carcinoma.

Drug Carriers: Classification, Administration, Release Profiles, and Industrial Approach

This work is aimed at providing a description of the complex world of drug carriers, starting from the description of this particular market in terms of revenue. Then, a brief overview of several types of conventional and innovative drug carrier systems has been included. The types of administration routes were also analyzed, with a critical and qualitative comment on drug release kinetics and drug profile shapes. Carriers were classified according to their ability to provide a prolonged and targeted release. The concept of the therapeutic window has been presented, providing advantages of having pulsed drug release to avoid side effects to target tissues. A critical comment on the use of conventional and innovative techniques for the production of drug carriers by large industrial companies has been proposed. As a final attempt for this work, an overall unique schematization of a drug carrier production process has been added, highlighting the necessity to create a strong double link among world-requested versatility of drug carriers for human applications and the newly developed industrial processes.

Monoclonal Antibodies Carried in Drug Delivery Nanosystems as a Strategy for Cancer Treatment

Monoclonal antibodies carried in nanosystems have been extensively studied and reported as a promising tool for the treatment of various types of cancers. Monoclonal antibodies have great advantages for the treatment of cancer because their protein structure can bind to the target tissue; however, it has some challenges such as denaturation following heat exposure and extreme values of pH, temperature and solvents, the ability to undergo hydrolysis, oxidation and deamination and the formation of non-native aggregates, which compromise drug stability to a large extent. In addition to these characteristics, they suffer rapid elimination when in the blood, which results in a short half-life and the production of neutralizing antibodies, rendering the doses ineffective. These challenges are overcome with encapsulation in nanosystems (liposomes, polymer nanoparticles, cyclodextrins, solid lipid nanoparticles, nanostructured lipid carriers, dendrimers and micelles) due to the characteristics of improving solubility, permeability, and selectivity only with tumor tissue; with that, there is a decrease in side effects beyond controlled release, which is critical to improving the therapeutic efficacy of cancer treatment. The article was divided into different types of nanosystems, with a description of their definitions and applications in various types of cancers. Therefore, this review summarizes the use of monoclonal antibodies encapsulated in nanosystems and the description of clinical studies with biosimilars. Biosimilars are defined as products that are similar to monoclonal antibodies which are produced when the patent for the monoclonal antibodies expires.

Oral self-nanoemulsifying formulation of GLP-1 agonist peptide exendin-4: development, characterization and permeability assesment on Caco-2 cell monolayer

The objective of this study was to prepare a stable self-nanoemulsifying formulation of exendin-4, which is an antidiabetic peptide. As exendin-4 is commercially available only in subcutaneous form, several attempts have been made to discover an effective oral formulation. Self-nanoemulsifying drug delivery systems are known to be suitable carriers for the oral administration of peptide drugs. Various ratios of oil, surfactant, and co-surfactant mixtures were used to determine the area in the pseudoternary phase diagram for clear nanoemulsion. The Design of Experiment approach was used for the optimization of the formulation. Blank self-nanoemulsifying formulations containing ethyl oleate as oil phase, Cremophor EL^®, and Labrasol^® as surfactant, absolute ethanol, and propylene glycol as co-solvent in various proportions were approximately 18-50 nm, 0.08-0.204 and - 3 to - 23 mV in droplet size, polydispersity index, and zeta potential, respectively. When all formulations were compared by statistical analysis, five of them with smaller droplet sizes were selected for further studies. The physical stability test was performed for 1 month at 5 °C ± 3 °C and 25 °C ± 2 °C/60% RH ± 5% RH storage conditions. As a result of the characterization and physical stability test results, ethyl oleate: Cremophor EL^®:absolute ethanol (30:52.5:17.5) formulation and four formulations containing ethyl oleate: Cremophor EL^®:Labrasol^®:propylene glycol:absolute ethanol at varying concentrations were considered for peptide encapsulation efficiency. Formulation having the highest encapsulation efficiency of exendin-4 containing ethyl oleate: Cremophor EL^®:Labrasol^®:propylene glycole:absolute ethanol (15:42.5:21.25:15.94:5.31) was selected for in vitro Caco-2 intestinal permeability study. The permeabiliy coefficient was increased by 1.5-folds by exendin-4-loaded self-nanoemulsifying formulation as compared to the exendin-4 solution. It can be concluded that intestinal permeability has been improved by self-nanoemulsifying formulation.

Multivesicular Liposome (Depofoam) in Human Diseases

Drug development is a key point in the research of new therapeutic treatments for increasing maximum drug loading and prolonged drug effect. Encapsulation of drugs into multivesicular liposomes (DepoFoam) is a nanotechnology that allow delivery of the active constituent at a sufficient concentration during the entire treatment period. This guarantees the reduction of drug administration frequency, a very important factor in a prolonged treatment. Currently, diverse DepoFoam drugs are approved for clinical use against neurological diseases and for post-surgical pain management while other are under development for reducing surgical bleeding and for post-surgical analgesia. Also, on pre-clinical trials on cancer DepoFoam can improve bioavailability and stability of the drug molecules minimizing side effects by site-specific targeted delivery. In the current work, available literature on structure, preparation and pharmacokinetics of DepoFoam are reviewed. Moreover, we investigated approved DepoFoam formulations and preclinical studies with this nanotechnology.

Evaluation of the hypoglycemic effect of exendin-4's new oral self-nanoemulsifying system in rats

The objective of this study is to develop a new self-nanoemulsifying system containing exendin-4 with or without enzyme inhibitor chymostatin and to evaluate the effects of oral administration of exendin-4 and exendin-4/chymostatin loaded self nanoemulsifying system on plasma exendin-4, plasma insulin, blood glucose levels and to compare with the oral and subcutaneous administration of exendin-4 in non-diabetic and streptozotocin-induced type 2 diabetic rats. Exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying system containing ethyl oleate as the oil phase, Cremophor EL®/Labrasol® as the surfactants and propylene glycol as the co-solvent were prepared. The mean droplet size, polydispersity index, zeta potential and viscosity of exendin-4 loaded self-nanoemulsifying system were found as 24.28 ± 0.43 nm, 0.17 ± 0.01, -1.28 ± 3.61 mV, 79.60 ± 3.30 m.Pas, respectively. The mean droplet size, polydispersity index, zeta potential and viscosity of exendin-4/chymostatin loaded self-nanoemulsifying system were found as 20.25 ± 0.35 nm, 0.11 ± 0.02, -1.85 ± 2.49 mV, 100.02 ± 7.65 m.Pas, respectively according to our previous study. In the present study, we focused on long-term physical stability studies, pharmacokinetic studies and pharmacodynamic studies of prepared self-nanoemulsifying systems. According to the long- term physical stability data, exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying systems were found stable both at 5°C ± 3°C and at 25°C ± 60% RH for 12 months. Exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying systems increased AUC and C_max values in non-diabetic rats compared to the oral exendin-4 solution. In diabetic rats, exendin-4/chymostatin loaded self nanoemulsifying systems increased C_max values compared to the exendin-4 solution. Exendin-4/chymostatin loaded self-nanoemulsifying system decreased inter-subject variability compared to commercial Byetta®. At 30^th minute after administration of exendin-4 loaded self-nanoemulsifying system, exendin-4/chymostatin loaded self nanoemulsifying system and Byetta®, blood glucose levels decreased to 23%, 25%, 29%, respectively. It has been shown that pharmacodynamic response is close to Byetta® with exendin-4/chymostatin self-nanoemulsifying system oral administration. In conclusion, a self nanoemulsifying system was found to be a suitable carrier system, and the combination with enzyme inhibitor chymostatin is thought to be promising for oral delivery of exendin-4.

Co-encapsulation of sodium diethyldithiocarbamate (DETC) and zinc phthalocyanine (ZnPc) in liposomes promotes increases phototoxic activity against (MDA-MB 231) human breast cancer cells

There has been considerable interest in the development of novel photosensitisers for photodynamic therapy (PDT). The use of liposomes as drug delivery systems containing simultaneously two or more drugs is an attractive idea to create a new platform for PDT application. Therefore, the aim of this study was to evaluate the synergistic effect of diethyldithiocarbamate (DETC) and zinc phthalocyanine (PDT) co-encapsulated in liposomes. The reverse-phase evaporation method resulted in the successful encapsulation of DETC and ZnPc in liposomes, with encapsulation efficiencies above 85 %, mean size of 308 nm, and zeta potential of - 36 mV. The co-encapsulation decreased the cytotoxic effects in mouse embryo fibroblast (NIH3T3) cells and inhibited damage to human erythrocytes compared to free DETC + ZnPc. In addition, both the free drugs and co-encapsulated ones promoted more pronounced phototoxic effects on human breast cancer cells (MDA-MB231) compared to treatment with ZnPc alone. This synergistic effect was determined by DETC-induced decreases in the antioxidant enzyme activity of superoxide dismutase (SOD) and glutathione (GSH).

Tailor-Made Fluorinated Ionic Liquids for Protein Delivery

Nowadays, pharmaceutical companies are facing several challenges with the development and approval of new biological products. The unique properties of several fluorinated ionic liquids (FILs), such as their high surfactant power in aqueous solutions, their chemical and biological stability, and low toxicity, favor their application in the pharmaceutical industry. Furthermore, the numerous combinations between cations and anions, in the FILs design, enlarge the possibilities to construct a successful delivery system. Several FILs also proved to not affect the activity, stability, and secondary structure of the therapeutic protein lysozyme. This work aims to study the aggregation behavior of distinct FILs in the protein suitable medium, in the presence or absence of lysozyme. Besides, different incubation conditions were tested to guarantee the optimal enzymatic activity of the protein at more stable delivery systems. Following the optimization of the incubation conditions, the quantification of the encapsulated lysozyme was performed to evaluate the encapsulation efficiency of each FIL-based system. The release of the protein was tested applying variables such as time, temperature, and ultrasound frequency. The experimental results suggest that the aggregation behavior of FILs is not significantly influenced by the protein and/or protein buffer and supports their application for the design of delivery systems with high encapsulation efficiencies, maintaining the biological activity of either encapsulated and released protein.

Nanotechnology for COVID-19: Therapeutics and Vaccine Research

The current global health threat by the novel coronavirus disease 2019 (COVID-19) requires an urgent deployment of advanced therapeutic options available. The role of nanotechnology is highly relevant to counter this "virus" nano enemy. Nano intervention is discussed in terms of designing effective nanocarriers to counter the conventional limitations of antiviral and biological therapeutics. This strategy directs the safe and effective delivery of available therapeutic options using engineered nanocarriers, blocking the initial interactions of viral spike glycoprotein with host cell surface receptors, and disruption of virion construction. Controlling and eliminating the spread and reoccurrence of this pandemic demands a safe and effective vaccine strategy. Nanocarriers have potential to design risk-free and effective immunization strategies for severe acute respiratory syndrome coronavirus 2 vaccine candidates such as protein constructs and nucleic acids. We discuss recent as well as ongoing nanotechnology-based therapeutic and prophylactic strategies to fight against this pandemic, outlining the key areas for nanoscientists to step in.

High-loading Gα13-binding EXE peptide nanoparticles prevent thrombosis and protect mice from cardiac ischemia/reperfusion injury

Inefficient delivery is a major obstacle to the development of peptide-based drugs targeting the intracellular compartment. We recently showed that selectively inhibiting integrin outside-in signaling using a peptide (mP6) derived from the Gα13-binding ExE motif within the integrin β3 cytoplasmic domain had antithrombotic effects. Here, we engineered lipid-stabilized, high-loading peptide nanoparticles (HLPN), in which a redesigned ExE peptide (M3mP6) constituted up to 70% of the total nanoparticle molarity, allowing efficient in vivo delivery. We observed that M3mP6 HLPN inhibited occlusive thrombosis more potently than a clopidogrel/aspirin combination without adverse effects on hemostasis in rodents. Furthermore, M3mP6 HLPN synergized with P2Y12 receptor inhibitors or the clopidogrel/aspirin combination in preventing thrombosis, without exacerbating hemorrhage. M3mP6 HLPN also inhibited intravascular coagulation more potently than the P2Y12 inhibitor cangrelor. Postischemia injection of M3mP6 HLPN protected the heart from myocardial ischemia-reperfusion injury in a mouse model. This study demonstrates an efficient in vivo peptide delivery strategy for a therapeutic that not only efficaciously prevented thrombosis with minimal bleeding risk but also protected from myocardial ischemia-reperfusion injury in mice.

Protein Encapsulation Using Complex Coacervates: What Nature Has to Teach Us

Protein encapsulation is a growing area of interest, particularly in the fields of food science and medicine. The sequestration of protein cargoes is achieved using a variety of methods, each with benefits and drawbacks. One of the most significant challenges associated with protein encapsulation is achieving high loading while maintaining protein viability. This difficulty is exacerbated because many encapsulant systems require the use of organic solvents. By contrast, nature has optimized strategies to compartmentalize and protect proteins inside the cell-a purely aqueous environment. Although the mechanisms whereby aspects of the cytosol is able to stabilize proteins are unknown, the crowded nature of many newly discovered, liquid phase separated "membraneless organelles" that achieve protein compartmentalization suggests that the material environment surrounding the protein may be critical in determining stability. Here, encapsulation strategies based on liquid-liquid phase separation, and complex coacervation in particular, which has many of the key features of the cytoplasm as a material, are reviewed. The literature on protein encapsulation via coacervation is also reviewed and the parameters relevant to creating protein-containing coacervate formulations are discussed. Additionally, potential opportunities associated with the creation of tailored materials to better facilitate protein encapsulation and stabilization are highlighted.

Microneedle Mediated Transdermal Delivery of Protein, Peptide and Antibody Based Therapeutics: Current Status and Future Considerations

The success of protein, peptide and antibody based therapies is evident - the biopharmaceuticals market is predicted to reach $388 billion by 2024 [1], and more than half of the current top 20 blockbuster drugs are biopharmaceuticals. However, the intrinsic properties of biopharmaceuticals has restricted the routes available for successful drug delivery. While providing 100% bioavailability, the intravenous route is often associated with pain and needle phobia from a patient perspective, which may translate as a reluctance to receive necessary treatment. Several non-invasive strategies have since emerged to overcome these limitations. One such strategy involves the use of microneedles (MNs), which are able to painlessly penetrate the stratum corneum barrier to dramatically increase transdermal drug delivery of numerous drugs. This review reports the wealth of studies that aim to enhance transdermal delivery of biopharmaceutics using MNs. The true potential of MNs as a drug delivery device for biopharmaceuticals will not only rely on acceptance from prescribers, patients and the regulatory authorities, but the ability to upscale MN manufacture in a cost-effective manner and the long term safety of MN application. Thus, the current barriers to clinical translation of MNs, and how these barriers may be overcome are also discussed.

Development and characterization of exendin-4 loaded self-nanoemulsifying system and in vitro evaluation on Caco-2 cell line

Aim: Aim of this study was to develop exendin-4 and exendin-4/chymostatin loaded self-nanoemulsifying drug delivery system (SNEDDS).Methods: Surfactants and co-surfactants were mixed, oil phase containing exendin-4 or exendin-4/chymostatin was added dropwise for SNEDDS. Short term physical stability test was performed prior to the release, lipolysis and permeability studies.Results: SNEDDS containing ethyl oleate: Cremophor EL^®: Labrasol^®: propylene glycole (15:42.5:21.25: 21.25) were selected for in vitro release and intestinal permeability studies for suitable parameters and physical stability test results. SNEDDS were obtained which yielded Grade B nanoemulsions having droplet size below 25 nm. In vitro release studies showed that 73.79% of the peptide was released for 2 h at pH 6.8. Both exendin-4 and exendin-4/chymostatin loaded SNEDDS were non-toxic to Caco-2 cells. Permeability coefficients of both exendin-4 loaded SNEDDS and exendin-4/chymostatin loaded SNEDDS were higher than exendin-4 solution.Conclusions: Intestinal permeability of exendin-4 has been improved by SNEDDS formulations.

Protection of Protein Drugs by Self-Emulsified Nanoemulsion Against Proteolysis

The present study aimed to develop a self-emulsified nanoemulsion for salmon calcitonin (sCT) for non-invasive delivery. Hydrophobic ion pairing method was used to form hydrophobic complex of sCT with 4 counter ions (oleate, deoxycholate, docusate and tripolyphosphate). The partition coefficient and dissociation of the complexes in water of various pH were investigated. The complex-loaded nanoemulsions were characterized for droplet size, leakage of sCT from the droplets, and protection of sCT from enzymatic degradation. The results show that all the counter ions could form complexes with sCT with a complexation efficiency about 95% at pH 8.0. The complexes significantly increased the partition coefficient of sCT. The dissociation of the complexes in water was pH-dependent. At pH 6.8 and 7.4, the dissociation was negligible. At pH 1.0, the dissociation was 71%, 8%, 37% and 50% for sCT-polyphosphate, sCT-docusate, sCT-oleate and sCT-deoxycholate, respectively. The developed nanoemulsions had a size in the range of 27-62 nm. The leakage of sCT from the nanodroplets into the aqueous phase depended on the lipophilicity of the counter ions: 60%, 56%, and 24% leakage for sCT-docusate, sCT-oleate and sCT-deoxycholate, respectively. The nanoemulsion protected sCT from enzyme degradation when loaded inside the droplets, but not the leaked sCT.

Multiple targeting strategies achieve novel protein drug delivery into proapoptosis lung cancer cells by precisely inhibiting survivin

Therapeutic recombinant proteins have numerous advantages and benefits over chemical drugs, particularly high specificity and good biocompatibility. However, the therapeutic potential and clinical application of current anticancer protein drugs are limited as most biomarkers are located within cells, and multiple physiological barriers exist between the point of administration and the intracellular biomarker. Herein, we report a novel strategy to accurately deliver a cell-permeable dominant-negative TATm-Survivin (TmSm) protein (T34A) to intracellular survivin in cancer cells by overcoming multiple barriers in vivo. A poly(d,l-lactide-co-glycolide) (PLGA) inner core, a polyethylene glycol (PEG) modification, and a TATm peptide were simultaneously introduced to mediate tumor tissue targeting and response to pH-triggered TmSm release. Compared to free TmSm, the PEGylated-PLGA nanoparticle platform achieved a significantly higher cellular uptake efficiency (1.79-fold for A549 and 1.77-fold for Capan-2), effectively decreased IC50 (1.22-fold for A549 and 1.17-fold for Capan-2), and largely elevated apoptosis in different cancer cells (1.17-fold for A549 and 1.15-fold for Capan-2). Besides, this newly developed nanoplatform showed increased protein drug accumulation in the tumor site in A549-bearing nude mice and reached a tumor inhibition rate of 55.81% (1.35-fold versus free TmSm) by reducing the expression of intracellular survivin. All these results confirmed that our newly developed delivery strategy is a very promising tool, which helps protein drugs to cross multiple barriers in vivo and achieves precise targeting to intracellular biomarkers. This strategy could also be applied to other types of protein drugs to further improve their clinical anticancer therapeutic efficacy.