Application of biochar from food and wood waste as green admixture for cement mortar

Wood-Based Micro-Biochars in a Cement Mixture

Immediate action is required to achieve carbon neutrality within the cement industry. The integration of biochar into cement as a component of reinforced concrete has potential to mitigate carbon emissions in the construction sector by enabling carbon sequestration. In pursuit of eco-friendly practices and improved physical properties of cement composites, this study investigated the properties of wood-based, micron-sized biochar as a non-carbonate raw material, including its chemical composition, morphology, and wettability. The characterization of lignocellulosic micro-biochar and its mechanical impact on cement composites was a focus of this study. Cement was partially replaced with varying weight percentages of micro-biochar (1, 3, and 5 wt%), and the effects were evaluated through compressive strength tests after 7 and 28 d. The results demonstrated that the micro-biochar could sustain strength even when substituted for cement. Notably, after 28 d, the compressive strength of the sample with only cement was 29.6 MPa, while the sample with 3 wt% biochar substitution showed 30.9 MPa, indicating a 4.4% increase. This research contributes to sustainable construction practices by offering a green solution for reducing carbon emissions in the industry.

Porous Mortars Incorporating Active Biochar from Olive Stone Waste and Recycled Masonry Aggregate: Effects of Accelerated Carbonation Curing

This study investigated the use of activated biochar derived from olive stone waste and recycled masonry aggregates in porous mortar mixtures and assessed their behaviour under accelerated carbonation curing conditions. Three mortar mixtures were produced, incorporating 0%, 5%, and 10% activated biochar by volume. The physical, chemical, and mechanical properties of the mortars were analysed, including the compressive strength, flexural strength, water absorption, porosity, and CO2 capture capacity. Additionally, calorimetry tests were performed on cement pastes with 0%, 0.5%, 1%, 3%, 15%, and 20% activated biochar to evaluate their impact on setting times and ensure compatibility between activated biochar and cement. The results showed that the addition of biochar improved mechanical properties, particularly under accelerated carbonation curing, whereas active biochar (AcB) significantly enhanced the compressive and flexural strengths. Furthermore, biochar incorporation boosted CO2 capture efficiency, with the 10% biochar mix showing up to 147% higher CO2 uptake, compared with a control. These findings suggest that activated biochar and recycled masonry aggregates can be effectively utilised to develop sustainable construction materials and thereby contribute to carbon sequestration and the reduction in environmental impacts. This research fills the gaps in the current knowledge on the use of activated biochar from olive stones waste in cement-base materials under accelerated carbonation conditions.

Assessment of Mechanical and Ecotoxicological Properties of Mortar with Wood Waste Biochar as Partial Cement Replacement

For several decades, cement production has caused concerns about CO2 emissions. As the production of concrete has increased over the years, the fact that cement is its key component additionally raises a concern. By partially replacing cement with waste material such as biomass waste biochar, the reduction in waste and the reduction of CO2 emissions could be addressed at the same time but raises a concern about the ecotoxicological potential of biochar-containing cementitious composites. During their use, recycling and disposal of biochar-containing mortars could pose hazardous environmental impacts due to their exposure to rain and other environmental conditions. The aim of the study was to determine the early-age mechanical properties of mortars with 5%, 10%, and 15% biochar as partial cement replacement. The environmental impact of biochar-containing mortars in terms of carbon footprint reduction and ecotoxicological potential was addressed simultaneously. The biochar used was prepared from waste wood biomass as carpentry waste wood. Results showed that added biochar caused no significant changes in flowability and fresh density of fresh mortar mixture. The strength tests revealed mortars with 5% and 10% biochar had higher 3-day flexural strength, while only mortar with 5% biochar had higher 7- and 28-day compressive strength (4% and 6%) than the conventional mortar. The X-ray diffraction (XRD) analysis detected five main crystalline phases in biochar-containing mortars. SEM-EDS showed the strong embedment of biochar particles in cement paste. Ecotoxicological assessment based on acute toxicity tests with mortar leachates using duckweed and mustard seeds showed low toxicity of leachates with the highest inhibition values around 50%. The calculations of the total CO2-equivalent emissions for selected mortars revealed mortars with biochar as partial cement replacement had lower CO2-equivalent emissions than the conventional mortar and can contribute to carbon footprint reduction and at the same time to natural resource conservation.

Coal-derived char as new sand replacement material in cement mortars: A comprehensive experimental study

Coal char is a coal-derived product produced by pyrolysis of char, which has valuable applications in the production of building materials. This paper presents the use of coal char in developing coal char-based cement mortar. Coal char is used to replace the sand, partially, at different proportions in cement mortar, and the change in properties is studied. Four cement types are used in the initial study, and one is selected for a detailed study based on the water retention, density, and compressive strength of the mortar. The properties of coal char-based mortar for the selected cement are comprehensively evaluated in terms of flow, water retention, air content, density, compressive strength, flexural strength, porosity, water absorption, drying shrinkage, thermal conductivity, thermogravimetric and differential thermal analysis, and scanning electron microscopy. The addition of coal char at an optimum sand replacement content of 5 % increases the compressive strength of mortar by 17.55 % and the flexural strength by 17.57 %, compared to conventional cement mortar. The thermal conductivity reduces by a maximum of 20 %, compared to traditional cement mortar. This paper also presents a study to compare the addition of coal char and commercial biochar on the properties of masonry cement mortar. The compressive strength of mortar with coal char is 44.39 % greater than that of mortar with the same content of biochar. The addition of coal char as a new sand replacement material shows good potential in improving the engineering properties of mortar.

Synergetic anaerobic digestion of food waste for enhanced production of biogas and value-added products: strategies, challenges, and techno-economic analysis

The generation of food waste (FW) is increasing at an alarming rate, contributing to a total of 32% of all the waste produced globally. Anaerobic digestion (AD) is an effective method for dealing with organic wastes of various compositions, like FW. Waste valorization into value-added products has increased due to the conversion of FW into biogas using AD technology. A variety of pathways are adopted by microbes to avoid unfavorable conditions in AD, including competition between sulfate-reducing bacteria and methane (CH4)-forming bacteria. Anaerobic bacteria decompose organic matter to produce biogas, a digester gas. The composition depends on the type of raw material and the method by which the digestion process is conducted. Studies have shown that the biogas produced by AD contains 65-75% CH4 and 35-45% carbon dioxide (CO2). Methanothrix soehngenii and Methanosaeta concilii are examples of species that convert acetate to CH4 and CO2. Methanobacterium bryantii, Methanobacterium thermoautotrophicum, and Methanobrevibacter arboriphilus are examples of species that produce CH4 from hydrogen and CO2. Methanobacterium formicicum, Methanobrevibacter smithii, and Methanococcus voltae are examples of species that consume formate, hydrogen, and CO2 and produce CH4. The popularity of AD has increased for the development of biorefinery because it is seen as a more environmentally acceptable alternative in comparison to physico-chemical techniques for resource and energy recovery. The review examines the possibility of using accessible FW to produce important value-added products such as organic acids (acetate/butyrate), biopolymers, and other essential value-added products.

Evaluation of Rheological Properties of Asphalt Binder Modified with Biochar from Oat Hulls

In this study, the effect of biochar from oat hulls (BO) on the rheological properties of a PG 64-22 asphalt binder was evaluated using a full factorial design, which included the following factors: pyrolysis temperature (PT) (300 °C and 500 °C), BO particle size (<20 µm and <75 µm), and the amount of BO (2.5%, 5%, and 7.5%). First, the morphological and physicochemical properties of BO were analyzed by comparing it with graphite powder (CFG) and commercial activated carbon (CAC). The physicochemical properties of the modified asphalt binder were then evaluated using confocal laser microscopy, scanning electron microscopy (SEM-EDX), and Fourier-transform infrared spectroscopy (FTIR). Its storage stability was also evaluated. Subsequently, the rutting parameter G*/sin(δ) and the Fraass breaking point were analyzed to select asphalt binders that extended their viscoelastic range. The asphalt binders selected were those with 2.5%, 5%, and 7.5% BO, produced at a PT of 300 °C with a particle size <20 µm (BO300S). Next, the rheological properties of the selected samples were evaluated by testing for rotational viscosity, rutting parameter G*/sin(δ), multiple stress creep recovery (MSCR), fatigue parameter G*·sin(δ), and creep stiffness by bending beam rheometry (BBR). The rheological aging index according to rutting parameter G*/sin(δ) (RAI) was also evaluated. These tests were conducted in different states of the asphalt binder: original, short-term aged, and long-term aged. According to the results, the application of BO300S significantly increased the resistance of the asphalt binder to rutting and rotational viscosity, proportional to the amount added to the asphalt binder. Moreover, low modifier percentages improved fatigue resistance, outperforming CFG and CAC. In addition, it performs well at low service temperatures, registering better resistance than the control asphalt binders.

Simultaneous achievement of energy recovery and carbon sequestration through municipal solid waste management: A review

Effective municipal solid waste (MSW) management is a crucial component for sustainable cities, as inefficient waste disposal contributes to the release of about a billion tons of CO2-eq in greenhouse gases (GHG) annually. With escalating global waste generation, there is an untapped opportunity to integrate carbon dioxide removal (CDR) technologies into existing MSW management processes. This review explores current research on utilizing MSW for CDR, emphasizing its potential for both energy generation and carbon sequestration. The investigation covers three waste management practices: landfilling, waste-to-energy (WtE), and biochar production, revealing two paths for carbon sequestration. First, MSW serves as a feedstock in bioenergy with carbon capture and storage (BECCS), acting as a carbon-neutral resource that avoids fossil fuel and energy crop use, reducing GHG emissions and generating value through energy production. Second, direct storage of organic MSW and its derivatives, like biochar, in various carbon sinks allows for extended sequestration, offering a comprehensive approach to address the challenges of waste management and climate change mitigation. Moreover, this review advocates for an extended exploration into several subjects including in-depth analysis of waste, research on MSW-derived biochar recalcitrance across different carbon sinks, and understanding the symbiotic connections with GHG-emitting sectors like agriculture and energy. Finally, this review emphasizes the necessity of conducting life-cycle assessment studies to fully discern the benefits and assess the impacts of any future endeavors exploring the role of MSW in carbon sequestration.

Bamboo-Based Biochar: A Still Too Little-Studied Black Gold and Its Current Applications

Biochar (BC), also referred to as "black gold", is a carbon heterogeneous material rich in aromatic systems and minerals, preparable by the thermal decomposition of vegetable and animal biomasses in controlled conditions and with clean technology. Due to its adsorption ability and presence of persistent free radicals (PFRs), BC has demonstrated, among other uses, great potential in the removal of environmental organic and inorganic xenobiotics. Bamboo is an evergreen perennial flowering plant characterized by a short five-year growth period, fast harvesting, and large production in many tropical and subtropical countries worldwide, thus representing an attractive, low-cost, eco-friendly, and renewable bioresource for producing BC. Due to their large surface area and increased porosity, the pyrolyzed derivatives of bamboo, including bamboo biochar (BBC) or activated BBC (ABBC), are considered great bio-adsorbent materials for removing heavy metals, as well as organic and inorganic contaminants from wastewater and soil, thus improving plant growth and production yield. Nowadays, the increasing technological applications of BBC and ABBC also include their employment as energy sources, to catalyze chemical reactions, to develop thermoelectrical devices, as 3D solar vapor-generation devices for water desalination, and as efficient photothermal-conversion devices. Anyway, although it has great potential as an alternative biomass to wood to produce BC, thus paving the way for new bio- and circular economy solutions, the study of bamboo-derived biomasses is still in its infancy. In this context, the main scope of this review was to support an increasing production of BBC and ABBC and to stimulate further studies about their possible applications, thus enlarging the current knowledge about these materials and allowing their more rational, safer, and optimized application. To this end, after having provided background concerning BC, its production methods, and its main applications, we have reviewed and discussed the main studies on BBC and ABBC and their applications reported in recent years.

A holistic framework of biochar-augmented cementitious products and general applications: Technical, environmental, and economic evaluation

In the context of the circular economy, the development of innovative and low-carbon concrete that incorporates different kinds of waste materials is gaining attention among the research community, regulatory agencies, and policymakers. These materials can be incorporated into concrete mixtures as aggregates or as fillers for improvement of product properties. This study aims to identify reliable designs for biochar-augmented cementitious products and general applications through technical, environmental, and economic assessments. The outcomes demonstrate that 5 wt% biochar addition could enhance the compressive strength of the final products. Using biochar, together with other recycled materials, can enormously reduce the environmental impacts, especially for global warming, enabling biochar-augmented cementitious products and general application as carbon-negative resources. The highest GWP reduction reached -720 kg CO2/tonne, equal to a 200% saving. A high quantity of biochar could be included in several specific applications (up to 60 wt%). The economic assessment highlights that the proposed designs are cost-effective and carbon tax can be significantly reduced. Carbon credits can also be earned for some carbon-negative designs. These findings can serve to mitigate GHG emissions and provide decision-makers with a reliable and holistic framework towards the goal of carbon neutrality.

Biochar affects compressive strength of Portland cement composites: a meta-analysis

One strategy to reduce CO2 emissions from cement production is to reduce the amount of Portland cement produced by replacing it with supplementary cementitious materials (SCMs). Biochar is a potential SCM that is an eco-friendly and stable porous pyrolytic material. However, the effects of biochar addition on the performances of Portland cement composites are not fully understood. This meta-analysis investigated the impact of biochar addition on the 7- and 28-day compressive strength of Portland cement composites based on 606 paired observations. Biochar feedstock type, pyrolysis conditions, pre-treatments and modifications, biochar dosage, and curing type all influenced the compressive strength of Portland cement composites. Biochars obtained from plant-based feedstocks (except rice and hardwood) improved the 28-day compressive strength of Portland cement composites by 3-13%. Biochars produced at pyrolysis temperatures higher than 450 °C, with a heating rate of around 10 C min-1, increased the 28-day compressive strength more effectively. Furthermore, the addition of biochar with small particle sizes increased the compressive strength of Portland cement composites by 2-7% compared to those without biochar addition. Biochar dosage of < 2.5% of the binder weight enhanced both compressive strengths, and common curing methods maintained the effect of biochar addition. However, when mixing the cement, adding fine and coarse aggregates such as sand and gravel affects the concrete and mortar's compressive strength, diminishing the effect of biochar addition and making the biochar effect nonsignificant. We concluded that appropriate biochar addition could maintain or enhance the mechanical performance of Portland cement composites, and future research should explore the mechanisms of biochar effects on the performance of cement composites.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s42773-024-00309-2.

Enhancing road performance of lead-contaminated soil through biochar-cement solidification: An experimental study

The effectiveness of cement-based solidification for remediating heavy metal-contaminated soil diminishes at high levels of contamination. To overcome this limitation, the potential of a biochar-cement composite curing agent to enhance the properties of Pb 2+ contaminated soil was investigated in this study. The permeability, unconfined compressive strength (UCS), and leaching characteristics of the biochar-cement composite material were assessed under varying biochar contents. The results revealed that the addition of 1-5 wt% biochar in cement significantly improved the UCS of the solidified soil. However, excessive biochar contents had a detrimental effect on the strength of samples. Additionally, the incorporation of 3.0% biochar reduced the hydraulic conductivity and porosity to 7.75 × 10-9 cm/s and 43.12%, respectively. Moreover, the biochar-cement composite material exhibited remarkable efficiency in treating highly concentrated Pb2+ contaminated soil, with leaching concentration decreasing significantly with increasing biochar content, falling below the Chinese hazardous waste identification standard. Overall, the utilization of a biochar-cement composite curing agent in the solidification of heavy metal-contaminated soil could be considered a promising subgrade filler technique.

Performance of biochar mixed cement paste for removal of Cu, Pb and Zn from stormwater

Using biochar as a partial replacement of Portland cement in cementitious materials is a promising solution to mitigate negative environmental impacts. However, current studies in available literature primarily focus on the mechanical properties of composites made with cementitious materials and biochar. Therefore, this paper reports the effects of the type of biochar, the percentage of biochar addition, and the particle size of the biochar on the removal efficiency of Cu, Pb, and Zn, as well as the effect of contact time on the removal efficiency of Cu, Pb, and Zn, along with the compressive strength. The peak intensities of OH^-, CO₃^2- and Calcium Silicate Hydrate (Ca-Si-H) peaks increase with increasing biochar addition levels, reflecting increased hydration product formation. The reduction of particle size of biochar causes the polymerization of the Ca-Si-H gel. However, no significant changes were observed in heavy metal removal, irrespective of the percentage of biochar addition, the particle size of biochar, or the type of biochar added to the cement paste. Adsorption capacities above 19 mg/g, 11 mg/g and 19 mg/g for Cu, Pb and Zn were recorded in all composites at an initial pH of 6.0. The Pseudo second order model best described the kinetics of the Cu, Pb, and Zn removal. The rate of adsorptive removal increases with the decrease in the density of the adsorbents. Over 40% of Cu and Zn were removed as carbonates and hydroxides through precipitation, whereas over 80% of Pb removal was via adsorption. Heavy metals bonded with OH^-, CO₃^2- and Ca-Si-H functional groups. The results demonstrate that biochar can be used as a cement replacement without negatively impacting heavy metal removal. However, neutralization of the high pH is needed before safe discharge.

Mechanical, durability, and microstructural properties of mortars containing spent mushroom substrate as partial fine aggregate replacement

Replacing conventional fine aggregates with spent mushroom substrate (SMS) is aimed at developing a sustainable lightweight masonry mortar. It is also an alternative solution for the current improper mushroom waste disposals. Density, workability, compressive strength, specific strength, flexural strength, ultrasonic pulse velocity, water absorption, sorptivity, and equivalent CO₂ emission in relation to sand reduction in mortars containing 2.5-15.0% (by volume) SMS passing through a 4.75-mm sieve were investigated. As the percentages of replacement increased from 2.5 to 15.0%, the density of the SMS mortar reduced up to 34.8%, with corresponding compressive strengths of 24.96 to 3.37 MPa. Mixes with up to 12.5% SMS met the minimum compressive and flexural strengths as stated in the ASTM C129 standard. In addition, the equivalent CO₂ emission of the mixes reduced 15.09% as the SMS content increased while cost-effectiveness increases up to 98.15% until 7.5% SMS replacement. In conclusion, the use of SMS as fine aggregates up to 12.5% is a viable mix design strategy for producing sustainable lightweight mortar with a lower carbon emission.

Effect of Biochar Dosage and Fineness on the Mechanical Properties and Durability of Concrete

Biochar (BC), a byproduct of agricultural waste pyrolysis, shows potential as a sustainable substitute material for ordinary silicate cement (OPC) in concrete production, providing opportunities for environmental sustainability and resource conservation in the construction industry. However, the optimal biochar dosage and fineness for enhancing concrete performance are still unclear. This study investigated the impact of these two factors on the mechanical and durability properties of biochar concrete. Compressive and flexural strength, carbonation resistance, and chloride ion penetration resistance were evaluated by varying biochar dosages (0%, 1%, 3%, 5%, 10%) and fineness dimensions (44.70, 73.28, 750, 1020 μm), with the 0% dosage serving as the control group (CK). The results showed that the addition of 1-3 wt% of biochar could effectively reduce the rapid carbonation depth and chloride diffusion coefficient of concrete. The compressive and flexural strength of BC concrete initially increased and then decreased with the increase in biocarbon content, BC with a fineness of 73.28 μm having the most significant effect on the mechanical strength of concrete. At the dosage of 3 wt%, BC was found to promote the hydration degree of cement, improving the formation of cement hydration products. These findings provide valuable insights for the development of sustainable and high-performance cement-based materials with the appropriate use of biochar as an additive.

Valorization of Vetiver Root Biochar in Eco-Friendly Reinforced Concrete: Mechanical, Economic, and Environmental Performance

Biochar has shown great promise in producing low-cost low-carbon concrete for civil infrastructure applications. However, there is limited research comparing the use of pristine and contaminated biochar in concrete. This paper presents comprehensive laboratory experiments and three-dimensional nonlinear finite element analysis on the mechanical, economical, and environmental performance of reinforced concrete beams made using concrete blended with biochar generated from vetiver grass roots after the roots were used in an oil extraction process. Both pristine biochar and biochar that were used to treat wastewater through adsorbing heavy metals (100 mg/L of Pb, Cu, Cd, and Zn) were investigated. The biochar was used to replace up to 6% Portland cement in concrete. Laboratory experiments were conducted to characterize the workability, mechanical properties, shrinkage, and leaching potential of the concrete blended with biochar. The results showed that using biochar could increase the compressive strengths and reduce the shrinkage of concrete without causing a leaching problem. The results from finite element analysis of the reinforced concrete beams showed that the use of biochar was able to increase the flexural performance of the beams as well as their economic and environmental performance. This research will promote the development and structural applications of low-cost low-carbon concrete.

A Review on the Challenges and Choices for Food Waste Valorization: Environmental and Economic Impacts

Valorization of food waste (FW) is instrumental for reducing the environmental and economic burden of FW and transitioning to a circular economy. The FW valorization process has widely been studied to produce various end-use products and summarize them; however, their economic, environmental, and social aspects are limited. This study synthesizes some of the valorization methods used for FW management and produces value-added products for various applications, and also discusses the technological advances and their environmental, economic, and social aspects. Globally, 1.3 billion tonnes of edible food is lost or wasted each year, during which about 3.3 billion tonnes of greenhouse gas is emitted. The environmental (-347 to 2969 kg CO₂ equiv/tonne FW) and economic (-100 to $138/tonne FW) impacts of FW depend on the multiple parameters of food chains and waste management systems. Although enormous efforts are underway to reduce FW as well as valorize unavoidable FW to reduce environmental and economic loss, it seems the transdisciplinary approach/initiative would be essential to minimize FW as well as abate the environmental impacts of FW. A joint effort from stakeholders is the key to reducing FW and the efficient and effective valorization of FW to improve its sustainability. However, any initiative in reducing food waste should consider a broader sustainability check to avoid risks to investment and the environment.

Optimization via response surface methodology of palm kernel shell biochar for supplementary cementitious replacement

The use of sustainable materials in the construction industry has been on the rise recently. Studies have proven that the use of conventional concrete and its raw materials has a negative impact on the environment. Research on incorporating biochar as a supplementary cementitious material has been recently evolving and has shown that the attributes of biochar are highly affected by the pyrolysis parameters. These attributes have enhanced the properties of biochar concrete and mortar composite. This paper identifies the different physiochemical properties exhibited by palm kernel shell biochar through optimization by response surface methodology. Focusing on some of the properties of biochar that have proven beneficial when used as a cement replacement. Very limited research has used optimization tools for the production of biochar with the intention of using it as a cement substitute. Pyrolysis was conducted by a tubular furnace at different temperature ranges from 200 °C to 800 °C. The biomass and biochar have been analyzed with TGA and FESEM-EDX. The targeted biochar properties and selected responses are the yield, carbon, oxygen, silica, and potassium content. The optimized parameters obtained are 409 °C, 15 °C/min, 120 min with responses of 38.2% yield, 73.37% carbon, 25.48% oxygen, 0.39% potassium and 0.44% silica. Thermal properties of the palm kernel shell biochar affected by the pyrolysis factors such as temperature, heating rate and residence time have also been discussed. In conclusion, this study supports and encourages the use of palm waste, which is abundant in Malaysia, as a supplementary cementitious material to promote sustainable growth in construction.

Biochar as additive for improved building performances and heavy metals solidification of sediment-based lightweight concrete

The sustainable disposal of large volumes of contaminated dredged river sediment has become a challenge for municipal management. In this study, a cutting-edge biochar application method was innovated, which converted the polluted dredged sediment into a low-carbon and environmentally friendly building material through an autoclave-free method. As the amount of biochar addition increased from 0 to 2% (w/w), the compressive strength of the dredged sediment-based lightweight concrete (DS-LC) increased from 3.92 to 4.61 MPa. Accordingly, the thermal conductivity decreased from 0.237 to 0.222 W/(m K), the water absorption decreased by 6%, and the water resistance coefficient increased by 33%. Results of X-ray diffraction (XRD) and thermogravimetric (TG) analysis showed that biochar promoted the hydration reaction and the carbonation process. Scanning electron microscopy (SEM) attached with energy-dispersive X-ray spectroscopy (EDX) showed that biochar addition changed the microstructure of the DS-LCs, which made the pore distribution more uniform and densified. Biochar addition also strengthened the immobilization of heavy metals (Cu, Zn, Cr, and As) by approximately 18-27% and combination of biochar and silica fume could increase the heavy metal immobilization by 28-44%. Compared with the traditional concrete material, the DS-LC with biochar addition could not only reduce the carbon emission but also has potential economic benefit for the treatment and utilization of dredged sediment.

Influence of pyrolysis temperature on the physicochemical properties of biochars obtained from herbaceous and woody plants

This work aimed to investigate the effect of pyrolysis temperature on the yield and properties of biochars synthesized from herbaceous and woody plants. Four typical materials, including two herbaceous plants (rice straw, corn straw) and two woody plants (camellia oleifera shells, garden waste), were used in the experiments under five operating temperatures (from 300 °C to 700 °C, with an interval of 100 °C). The results showed biochar derived from herbaceous plants had a significantly higher pH (from 7.68 to 11.29 for RS), electrical conductivity (EC, from 6.5 Ms cm-1 to 13.2 mS cm-1 for RS), cation exchange conductivity (CEC, from 27.81 cmol kg-1 to 21.69 cmol kg-1 for RS), and ash content (from 21.79% to 32.71% for RS) than the biochar from woody plants, but the volatile matter (VM, from 42.23% to 11.77% for OT) and specific surface area (BET, from 2.88 m2 g-1 to 301.67 m2 g-1 for OT) in the woody plant-derived biochar were higher. Except for CEC and VM, all the previously referred physicochemical characteristics in the as-prepared biochars increased with the increasing pyrolysis temperature, the H/C and O/C values of herbaceous and woody plant-derived biochar were lower than 0.9 and 0.3, respectively, confirming their potential as the material for carbon sequestration. The results revealed that biochar made from herbaceous plants was more suitable for acidic soil amendments. In contrast, woody plant-derived biochar were recommended to remove heavy metals in environmental remediation and water treatment.

Life Cycle Assessment (LCA) of Biochar Production from a Circular Economy Perspective

Climate change and environmental sustainability are among the most prominent issues of today. It is increasingly fundamental and urgent to develop a sustainable economy, capable of change the linear paradigm, actively promoting the efficient use of resources, highlighting product, component and material reuse. Among the many approaches to circular economy and zero-waste concepts, biochar is a great example and might be a way to push the economy to neutralize carbon balance. Biochar is a solid material produced during thermochemical decomposition of biomass in an oxygen-limited environment. Several authors have used life cycle assessment (LCA) method to evaluate the environmental impact of biochar production. Based on these studies, this work intends to critically analyze the LCA of biochar production from different sources using different technologies. Although these studies reveal differences in the contexts and characteristics of production, preventing direct comparison of results, a clear trend appears. It was proven, through combining life cycle assessment and circular economy modelling, that the application of biochar is a very promising way of contributing to carbon-efficient resource circulation, mitigation of climate change, and economic sustainability.

Biomaterials and Their Potentialities as Additives in Bitumen Technology: A Review

The carbon footprint reduction mandate and other eco-friendly policies currently in place are constantly driving the trend of the synthesis and application of sustainable functional materials. The bitumen industry is not an exception to this trend and, every day, new technologies that facilitate safer, cost effective and more sustainable industrial processes and road paving operations are being researched and brought to light. A lot of research is currently ongoing to improve bitumen's properties due to its use as a binder in road paving processes. Over the years, the most common method to improve bitumen's properties has been with the use of additives. The major drawback in the use of these additives is the fact that they are substances of strong chemical nature which are either too acidic, too basic or emit toxic fumes and volatile organic compounds into the environment. In the long run, these chemicals are also toxic to the road pavement personnel that carry out the day to day industrial and paving operations. This led researchers to the initiative of synthesizing and applying biomaterials to be used as additives for bitumen. In this light, several studies have investigated the use of substances such as bio-oils, natural waxes, gum, polysaccharides and natural rubber. This literature review is aimed at classifying the different bio-based materials used to improve bitumen's properties and to provide a deeper knowledge of the application of these biomaterials in bitumen technology. In general, we highlight how the research efforts elaborated herein could potentially foster safer, sustainable, eco-friendly approaches to improving bitumen's properties while also promoting a circular economy.

Current trends in production, morphology, and real-world environmental applications of biochar for the promotion of sustainability

Biochar has sparked a lot of interest in recent years for various applications such as contaminant removal, carbon sequestration and soil amendment. However, laboratory scale studies dominates over the real-world applications. In this study, we first enumerated on the various ongoing uses of biochar along with adsorption mechanism; and then identified the most suitable source, and efficient method for biochar production; and finally proposed real-world practical applications of biochar as an additive to control diffuse micropollutant pollution along the highways and railway tracks; as well as the pollution through agricultural runoff. We demonstrated that directly or indirectly, biochar can definitely help to achieve all the 17 Sustainable Development Goals. The study on the practical use of biochar is an emerging area, because a lot of research needs are there to realise the full-potential of biochar with ways of attaining sustainable development goals towards waste, energy and pollution management.

Immobilization and recycling of contaminated marine sediments in cement-based materials incorporating iron-biochar composites

Sustainable stabilization/solidification (S/S) incorporating biochar for hazardous wastes has attracted increasing attention. In this study, contaminated marine sediments were remediated and recycled as useful materials via cement-based S/S process incorporating iron-biochar composites derived from incinerated sewage sludge ash (ISSA) and peanut shell. Results showed that incorporation of 20% iron-biochar composites notably increased the Cr immobilization (52.8% vs 92.1-99.7%), while attained similar As (70%) and Cu (95%) immobilization efficiencies compared to the control group (CK) prepared with plain cement as the binder based on the Toxicity Characteristic Leaching Procedure. S/S products with the addition of ISSA derived iron-biochar composite had a mechanical strength of 5.0 MPa, which was significantly higher than its counterparts derived from pure iron oxide or pristine biochar (< 4.5 MPa). Microstructural and spectroscopic characterizations and chemical leaching experiments demonstrated that reduction of Cr(VI) to Cr(III) followed by formation of Cr-Fe precipitates by zero valent iron in iron-biochar composites contributed to the enhanced immobilization efficacy of Cr(VI) compared to CK. Overall, these results demonstrated the potential of applying ISSA and peanut shell derived iron-biochar composites as additives in the cement-based S/S treatment for contaminated sediments.

Biochar Produced from Saudi Agriculture Waste as a Cement Additive for Improved Mechanical and Durability Properties-SWOT Analysis and Techno-Economic Assessment

The Kingdom of Saudi Arabia generates an enormous amount of date palm waste, causing severe environmental concerns. Green and strong concrete is increasingly demanded due to low carbon footprints and better performance. In this research work, biochar derived from locally available agriculture waste (date palm fronds) was used as an additive to produce high-strength and durable concrete. Mechanical properties such as compressive and flexural strength were evaluated at 7, 14, and 28 days for control and all other mixes containing biochar. In addition, the durability properties of the concrete samples for the mixes were investigated by performing electric resistivity and ultra-sonic pulse velocity testing. Finally, a SWOT (strengths, weaknesses, opportunities, and threats) analysis was carried out to make strategic decisions about biochar’s use in concrete. The results demonstrated that the compressive strength of concrete increased to 28−29% with the addition of 0.75−1.5 wt% of biochar. Biochar-concrete containing 0.75 wt% of biochar showed 16% higher flexural strength than the control specimen. The high ultrasonic pulse velocity (UPV) values (>7.79 km/s) and low electrical resistivity (<22.4 kΩ-cm) of biochar-based concrete confirm that the addition of biochar resulted in high-quality concrete free from internal flaws, cracks, and better structural integrity. SWOT analysis indicated that biochar-based concrete possessed improved performance than ordinary concrete, is suitable for extreme environments, and has opportunities for circular economy and applications in various construction designs. However, cost and technical shortcomings in biochar production and biochar-concrete mix design are still challenging.

Relationship between Bacterial Contribution and Self-Healing Effect of Cement-Based Materials

The civil research community has been attracted to self-healing bacterial-based concrete as a potential solution in the economy 4.0 era. This concept provides more sustainable material with a longer lifetime due to the reduction of crack appearance and the need for anthropogenic impact. Regardless of the achievements in this field, the gap in the understanding of the importance of the bacterial role in self-healing concrete remains. Therefore, understanding the bacterial life cycle in the self-healing effect of cement-based materials and selecting the most important relationship between bacterial contribution, self-healing effect, and material characteristics through the process of microbiologically (bacterially) induced carbonate precipitation is just the initial phase for potential applications in real environmental conditions. The concept of this study offers the possibility to recognize the importance of the bacterial life cycle in terms of application in extreme conditions of cement-based materials and maintaining bacterial roles during the self-healing effect.

Waste Management for Green Concrete Solutions: A Concise Critical Review

Reinforced concrete based on ordinary Portland cement (OPC) is one of the most commonly used materials in modern buildings. Due to the global growth of the building industry, concrete components have been partially or completely replaced with waste materials that can be used as binders or aggregates. Besides the ecological aspects, modern architecture widely needs materials to make the concrete durable, resisting large loads and various detrimental forces in the environment. This opens the possibilities of managing waste materials and applying them in practice. This paper presents a concise review of the green solutions for ecofriendly materials in the building industry that deal with the practical application of materials commonly treated as waste. The main emphasis was placed on their influence on the properties of the building material, optimal composition of mixtures, and discussion of the advantages and disadvantages of each of the “green” additives. It turned out that some solutions are far from being ecofriendly materials, as they leech and release numerous harmful chemicals into the environment during their presence in concrete. Finally, the paper suggests a research direction for the development of an ecofriendly structural material for a sustainable future.

Improving photocatalytic activity under visible light over a novel food wastes biochar-based BiOBr nanocomposite

Biochar (C) applied in synthesizing photocatalysts to eliminate water pollution has been intensively investigated. Herein we report the first use of biochar pyrolyzed from food wastes at 400 ^°C (400C) and 700 ^°C to construct C/BiOBr composites via a facile hydrolysis approach. Photocatalytic performances could be significantly improved by choosing the appropriate carbonization temperature and adjusting the content of C in C/BiOBr composites. The prepared 1%400C/BiOBr exhibited the best photodegradation capacity towards methylene orange (20 mg/L) and tetracycline (50 mg/L). A series of characterization results illustrated that smooth structure and surface properties (oxygen functional groups and persistent free radicals) of 400C played an important role in enhancing the photocatalytic activities. Mechanism exploration suggested that h⁺ and ˙O₂^- were the main active species thus contributing to photodegradation. This study provided a new insight into utilization of biochar derived from food wastes in photocatalysis and environmental remediation.

When Physical Chemistry Meets Circular Economy to Solve Environmental Issues: How the ReScA Project Aims at Using Waste Pyrolysis Products to Improve and Rejuvenate Bitumens

Urban waste management is a hard task: more than 30% of the world’s total production of Municipal Solid Wastes (MSW) is not adequately handled, with landfilling remaining as a common practice. Another source of wastes is the road pavement industry: with a service life of about 10–15 years, asphalts become stiff, susceptible to cracks, and therefore no longer adapted for road paving, so they become wastes. To simultaneously solve these problems, a circular economy-based approach is proposed by the ReScA project, suggesting the use of pyrolysis to treat MSW (or its fractions as Refuse Derived Fuels, RDFs), whose residues (oil and char) can be used as added-value ingredients for the asphalt cycle. Char can be used to prepare better performing and durable asphalts, and oil can be used to regenerate exhaust asphalts, avoiding their landfilling. The proposed approach provides a different and more useful pathway in the end-of-waste (EoW) cycle of urban wastes. This proof of concept is suggested by the following two observations: (i) char is made up by carbonaceous particles highly compatible with the organic nature of bitumens, so its addition can reinforce the overall bitumen structure, increasing its mechanical properties and slowing down the molecular kinetics of its aging process; (ii) oil is rich in hydrocarbons, so it can enrich the poor fraction of the maltene phase in exhaust asphalts. These hypotheses have been proved by testing the residues derived from the pyrolysis of RDFs for the improvement of mechanical characteristics of a representative bitumen sample and its regeneration after aging. The proposed approach is suggested by the physico-chemical study of the materials involved, and aims to show how the chemical knowledge of complex systems, like bituminous materials, can help in solving environmental issues. We hope that this approach will be considered as a model method for the future.

Potential of biochar use in building materials

A critical review of the articles dealing with biochar in terms of the reuse of biomass waste in building materials and its impact on material properties was conducted using five different electronic databases; thirteen articles were selected for this critical review. Biochar was used as a replacement for cement and aggregate in cementitious composites and as an addition in wood polypropylene composites and plasters. The biochar dosages ranged from 0.5% to 40%; in most composites, the addition of biochar increased strength and reduced thermal conductivity and the bulk density of fresh mortars. Also, biochar dosages of 0.5-2% decreased, while dosages of 10-40% increased water absorption and penetration on cementitious composites. The selected studies mainly introduced biochar use in building materials as a means of biomass waste reduction and its reuse for various purposes, while carbon footprint reduction was addressed in only a few of them. Biochar-containing building material's capability of capturing CO₂ from the air was also observed (0.033 mmol CO₂ g_biochar^-1 to 0.138 mmol CO₂ g_biochar^-1). The results also showed that mortars with CO₂-unsaturated biochar had better mechanical and physical properties than mortars with CO₂-saturated biochar. Selected studies showed biochar-containing building materials have a great potential for carbon footprint reduction. However, there is a lack of comprehensive studies about biochar use in building materials concerning climate change mitigation.

Toward Carbon-Neutral Concrete through Biochar–Cement–Calcium Carbonate Composites: A Critical Review

High-density, high-permanence forms of carbon storage are in demand to save storage space on land or at sea while allowing the world to reach its climate targets. Biochar and calcium carbonate are two such forms that have been considered largely separately in the literature for carbon storage. In this paper, we consider how biochar and calcium carbonate might interact when they are used together with cement as part of a carbon storage system, ideally to form a carbon-neutral concrete. The carbon storage system stores atmospherically absorbed CO2 within concrete, thereby reducing carbon in the atmosphere. In addition, such a system will help in reducing cement usage, thus reducing the need for clinker in cement manufacturing and directly reducing CO2 emissions that result from limestone calcination during clinker manufacturing. Another benefit of such a composite storage system is its use in building structures, a use that has positive environmental and social impact. Thus, further research on the properties of this composite material is warranted. This paper explores the literature on the use of biochar combined with calcium carbonate and cement as carbon storage material. The use of recycled carbon aggregates (RCAs) and LC3 concrete as part of this approach is reviewed. The paper also addresses the possible compressive strength range of the biochar–cement–calcium carbonate composite material, along with other performance expectations. Obstacles to scaling the use of carbon-neutral concrete are identified and an array of research directions are presented, with the goal of improving carbon-neutral concrete and its use.

Simultaneous adsorption of As(III) and Cd(II) by ferrihydrite-modified biochar in aqueous solution and their mutual effects

A simply synthetic ferrihydrite-modified biochar (Fh@BC) was applied to simultaneously remove As(III) and Cd(II) from the aqueous solution, and then to explore the mutual effects between As(III) and Cd(II) and the corresponding mechanisms. The Langmuir maximum adsorption capacities of As(III) and Cd(II) in the single adsorbate solution were 18.38 and 18.18 mg g⁻¹, respectively. It demonstrated that Fh@BC was a potential absorbent material for simultaneous removal of As(III) and Cd(II) in aqueous solution. According to the XRF, SEM–EDS, FTIR, XRD, and XPS analysis, the mechanisms of simultaneous removal of As(III) and Cd(II) by Fh@BC could be attributable to the cation exchange, complexation with R-OH and Fe-OH, and oxidation. Moreover, the mutual effect experiment indicated that Cd(II) and As(III) adsorption on Fh@BC in the binary solution exhibited competition, facilitation and synergy, depending on their ratios and added sequences. The mechanisms of facilitation and synergy between Cd(II) and As(III) might include the electrostatic interaction and the formation of both type A or type B ternary surface complexes on the Fh@BC.

Water treatment sludge conversion to biochar as cementitious material in cement composite

Water treatment sludge was successfully thermally converted to obtain biochar as a stable material with resource potential. This research explored the application of sludge biochar as a supplementary cementitious material. The cement paste samples incorporating different amounts of sludge biochar were prepared, hardened, and analyzed for performance. The results show an improvement in hydration kinetics and mechanical properties of cement paste incorporating biochar, compared to raw sewage sludge. The mineralogical, thermal and microscopic analyses show evidence of pozzolanic activity of the biochar. The samples with 2% and 5% biochar showed higher heat release than the reference material. Specimens with 1%, 2% and 5% biochar showed a slightly higher compressive strength at 28 days compared to the reference material. Sludge conversion to biochar will incur an estimated cost of US$398.23/ton, which is likely to be offset by the substantial benefits from avoiding landfill and saving valuable cementitious materials. Therefore, this research has demonstrated that through conversion to biochar, water treatment sludge can be promoted as a sustainable and alternative cementitious material for cement with minimum environmental impacts, hence contributing to circular economy.

Carbonaceous admixtures in cementitious building materials: Effect of particle size blending on rheology, packing, early age properties and processing energy demand

Application of biochar, produced from locally generated wastes, as admixture in cement is a strategy to upcycle biomass waste and produce durable building materials. This research explores the influence of particle size and porosity of biochar, prepared from coconut shell and wood waste, added at 2 wt% of cement, on rheology, setting time, hydration and early age strength of cement mortar. For each biochar type, three particle size gradations are explored - coarser biochar (d₅₀ = 45-50 μm) (obtained by sieving), finer biochar (d₅₀ = 10-18 μm) (obtained by ball milling) and combination of coarser and finer biochar (d₅₀ = 15-25 μm). Experimental findings suggest that combination of coarser and finer biochar improves workability and rheological properties of binder pastes compared to that with (only) coarser biochar. Depending on biochar type, hydration and rate of setting are accelerated compared to control. Inclusion of finer biochar and combination of finer and coarser biochar improve packing density and degree of hydration of pastes compared to coarser biochar and control, leading to 12-19% enhancement in compressive strength at 7-day age. Micro-structural investigations show that the macro-pores of coarser biochar can be filled with dense hydration products, although some macro-pores may remain unfilled. This offsets improvement in strength that can be achieved through enhancement in packing density. The approach of blending coarser and finer biochar reduces the energy demand and cost associated with ball-milling by 23-37% and SGD 2.30-4.80 per ton respectively compared to only finer (ball-milled) biochar per cubic meter of concrete. Overall, the findings from this research demonstrate that blending of biochar of different particle size distributions can enhance physical properties of cement-based materials, while reducing associated energy consumption.

Viscoelastic Properties, Rutting Resistance, and Fatigue Resistance of Waste Wood-Based Biochar-Modified Asphalt

The purpose of this study is to explore the viscoelastic properties, rutting resistance, and fatigue resistance of waste wood-based biochar-modified asphalt. The biochar with 2%, 4%, and 8% mixing amounts and two kinds of particle size, 75–150 μm and <75 μm, were used as modifiers of petroleum asphalt. Meanwhile, in the control group, a graphite modifier with a particle size of 0–75 μm and mixing amount of 4% was used for comparison. Aged asphalts were obtained in the laboratory by the Rolling Thin Film Oven (RTFO) test and the Pressure Aging Vessel (PAV) test. The viscoelastic properties, rutting resistance, and fatigue resistance of biochar-modified asphalt were evaluated by phase angle, critical high temperature, and fatigue cracking index by the Dynamic Shear Rheometer (DSR) test. In addition, the micromorphology of biochar and graphite was compared and observed by using the scanning electron microscope (SEM). The results show that increasing the mixing amount of biochar gave a higher elastic property and significantly better rutting resistance of the modified asphalt at high temperature. Compared with graphite, the biochar has a rougher surface and more pores, which provides its higher specific surface area. Therefore, it is easier to bond with asphalt to form a skeleton network structure, then forming a more stable biochar–asphalt base structure. In this way, compared to graphite-modified asphalt, biochar-modified asphalt showed better resistance to rutting at high temperature, especially for the asphalt modified with biochar of small particle size. The critical high temperature T(G*/sinδ) of 4% Gd, 4% WD, and 4% Wd was 0.31 °C, 1.57 °C, and 2.92 °C higher than that of petroleum bitumen. In addition, the biochar asphalt modified with biochar of small particle size had significantly better fatigue cracking resistance than the asphalt modified with biochar of large particle size. The fatigue cracking indexes for 2% Wd, 4% Wd, and 8% Wd were 29.20%, 7.21%, and 37.19% lower by average than those for 2% WD, 4% WD, and 8% WD at 13–37 °C. Therefore, the waste wood biochar could be used as the modifier for petroleum asphalt. After the overall consideration, the biochar-modified asphalt with 2%–4% mixing amount and particle size less than 75 μm was recommended.

Novel agrotechnological intervention for soil amendment through areca nut husk biochar in conjunction with vetiver grass

Soil quality management through effective utilization of agricultural residue is the cynosure of intense global research. Therefore, we have explored the pyrolytic conversion of a locally available agricultural residue, the areca nut husk (AH), into biochar (BC) as a sustainable option towards residue management. The AH was carbonized at 250-400 °C, and residence times of 30-90 min. Subsequent detailed analysis revealed areca nut husk biochar (AHBC) formed at 250 °C with 60 min residence time, had the highest soil organic matter yield index (SOMYI), the lowest H/C and O/C ratio, and an average particle size of 1191.6 nm. Further characterization exposed the highly porous structure of prepared AHBC with oxygenated functional groups attached to its surface. The application of AHBC in conjunction with vetiver (Chrysopogon zizanioides L.) was used as a novel agrotechnological approach to assess soil quality improvement. Various doses of AHBC (5 t ha^-1, 10 t ha^-1, and 15 t ha^-1) were applied in the experimental soils, and the principal component analysis (PCA) revealed that the 15 t ha^-1 dose was optimum for the growth of the vetiver. AHBC amendment in soil resulted in increase of plant height and relative water content. This could be attributed to the increase in organic carbon, cation exchange capacity, and nutrients in the soil. Application of AHBC along with vetiver could be a simple, yet effective option, for sustainable agricultural residue and soil management.

Microstructure and durability properties of lightweight and high-performance sustainable cement-based composites with rice husk ash

Sustainable solutions are investigated to reduce the environmental damage caused by greenhouse gases and CO₂ emissions. Cement is a construction material responsible for greenhouse gases and CO₂ emissions. Thus, CO₂ emissions are reduced by using replacement materials such as rice husk ash instead of cement. This study investigated the durability and mechanical properties of lightweight and high-performance, sustainable cement-based composites. A foaming agent was used to reduce the unit weight of the mixtures. Also, pumice powder (PP) and rice husk ash (RHA) were used to improve cement-based composites' durability and mechanical properties. The density of mixtures varies between 1666 and 2205 kg/m³. The early age strength of the mixes using 12.5% RHA has increased. The mixtures' compressive strength (91 days) with 25% RHA and 50% PP was 46.6 MPa. As the PP content of mixes increased, drying shrinkage values increased. Expansions decrease as the initial compressive strength increases in mixtures exposed to sulfate. As RHA and PP's ratio increased, weight loss decreased in mixes exposed to HCl, while weight loss increased in mixes exposed to H₂SO₄. It was determined that the content of CH(OH)₂ is important in mixes exposed to HCl and impermeability is important in mixes exposed to H₂SO₄. It has been observed that the initial compressive strength is also important in mixes exposed to the freeze-thaw effect. As the foam content of the mixes increased, the compressive strength decreased, while the drying shrinkage increased. As a result, using up to 25% RHA has increased the performance of cement-based composites.

Performance evaluation of crop residue and kitchen waste-derived biochar for eco-efficient removal of arsenic from soils of the Indo-Gangetic plain: A step towards sustainable pollution management

Biochar was produced from wheat straw (Triticum aestivum), rice straw (Oryza sativa), and kitchen waste at varying pyrolysis temperatures (300°C-700 °C). The biochars were screened depending on their production and physicochemical properties for the adsorptive removal of arsenic (As). The morphological analysis by Field emission scanning electron microscope revealed a porous biochar surface. Spectroscopic characterization of biochars indicated the co-existence of minerals, carboxyl, carbonyl, amide, and hydroxyl groups, which implies the suitability of biochar to immobilize metal (loid)s from soils. Changes in peaks were observed in Fourier-transform infrared and X-ray diffraction images after As sorption indicating the involvement of chemisorption. The thermogravimetric analysis and a low H/C value derived from the CHNS analyzer confirmed the high stability of biochar. The BET analysis was used to estimate the surface areas of wheat straw (15.8 m² g^-1), rice straw (12.5 m² g^-1), and kitchen waste (2.57 m² g^-1) -derived biochars. Batch sorption studies were performed to optimize experimental parameters for maximum removal of As. Maximum removal of As was observed for wheat straw-derived biochar (pyrolyzed at 500 °C) at 8 mg L^-1 initial concentration (IC), 7.5 % dose, 25 °C temperature, and 60 min contact time (83.7 ± 0.06 %); in rice straw-derived biochar (pyrolyzed at 500 °C) at 8 mg L^-1 IC, 7.5 % dose, 25 °C temperature, 90 min contact time (83.6 ± 0.37 %); and in kitchen waste-derived biochar (pyrolyzed at 500 °C) at 8 mg L^-1 IC, 5 % dose, 25 °C temperature, 60 min contact time (76.7 ± 0.16 %). The sorption model parameters suggested the possibility of chemisorption, physisorption, diffusion, and ion exchange for the removal of As. Therefore, it could be recommended to farmers that instead of disposing or burning straws and waste openly, they could adopt the process of charring to generate livelihood security and mitigation of geogenic contaminants from the soil/water dynamic systems.

Biotechnology for carbon capture and fixation: Critical review and future directions

To mitigate the growing threat of climate change and develop novel technologies that can eliminate carbon dioxide, the most abundant greenhouse gas derived from the flue gas stream of the fossil fuel-fired power stations, is momentous. The development of carbon capture and sequestration-based technologies may play a significant role in this regard. Carbon fixation mostly occurs by photosynthesizing plants as well as photo and chemoautotrophic microbes that turn the atmospheric carbon dioxide into organic materials via their enzymes. Biofuel can offer a sustainable solution for carbon mitigation. The pragmatic implementation of biofuel production processes is neither cost-effective nor has been proven safe over the long term. Searching for ways to enhance biofuel generation by the employment of genetic engineering is vital. Carbon biosequestration can help to curb the greenhouse effect. In addition, new genomic approaches, which are able to use gene-splicing biotechnology techniques and recombinant DNA technology to produce genetically modified organisms, can contribute to improvement in sustainable and renewable biofuel and biomaterial production from microorganisms. Biopolymers, Biosurfactants, and Biochars are suggested as sustainable future trends. This study aims to pave the way for implementing biotechnology methods to capture carbon and decrease the demand and consumption of fossil fuels as well as the emissions of greenhouse gases. Having a better image of microorganisms' potential role in carbon capture and storage can be prolific in developing powerful techniques to reduce CO₂ emissions.

Activation of biochar through exoenzymes prompted by earthworms for vermibiochar production: A viable resource recovery option for heavy metal contaminated soils and water

The industrial revolution and indiscriminate usage of a wide spectrum of agrochemicals account for the dumping of heavy metals in the environment. In-situ/ex-situ physical, chemical, and bioremediation strategies with pros and cons have been adopted for recovering metal contaminated soils and water. Therefore, there is an urgent requirement for a cost-effective and environment-friendly technique to combat metal pollution. Biochar combined with earthworms and vermifiltration is a suitable emerging technique for the remediation of metal-polluted soils and water. The chemical substances (e.g., sodium hydroxide, zinc chloride, potassium hydroxide, and phosphoric acid) have been used to activate biochar, which also faces several shortcomings. Studies reveal that extracellular enzymes have been used to activate biochar which is produced by earthworms and microbes that can alter the surface of the biochar. The present review focuses on the global scenario of metal pollution and its remediation through biochar activation using earthworms. The earthworms and biochar can produce "vermibiochar" which is capable of reducing the metal ions from contaminated water and soils. The vermifiltration can be a suitable technology for metal removal from wastewater/effluent. Thus, the biochar has a trick of producing entirely new options at a time when vermifiltration and other technologies are least expected. Further attention to the biochar-assisted vermifiltration of different sources of wastewater is required to be explored for the large-scale utilization of the process.

Biochar-Added Cementitious Materials—A Review on Mechanical, Thermal, and Environmental Properties

The enhanced carbon footprint of the construction sector has created the need for CO2 emission control and mitigation. CO2 emissions in the construction sector are influenced by a variety of factors, including raw material preparation, cement production, and, most notably, the construction process. Thus, using biobased constituents in cement could reduce CO2 emissions. However, biobased constituents can degrade and have a negative impact on cement performance. Recently, carbonised biomass known as biochar has been found to be an effective partial replacement for cement. Various studies have reported improved mechanical strength and thermal properties with the inclusion of biochar in concrete. To comprehend the properties of biochar-added cementitious materials, the properties of biochar and their effect on concrete need to be examined. This review provides a critical examination of the mechanical and thermal properties of biochar and biochar-added cementitious materials. The study also covers biochar’s life cycle assessment and economic benefits. Overall, the purpose of this review article is to provide a means for researchers in the relevant field to gain a deeper understanding of the innate properties of biochar imparted into biochar-added cementitious materials for property enhancement and reduction of CO2 emissions.

Gasification biochar from horticultural waste: An exemplar of the circular economy in Singapore

Organic waste, the predominant component of global solid waste, has never been higher, resulting in increased landfilling, incineration, and open dumping that releases greenhouse gases and toxins that contribute to global warming and environmental pollution. The need to create and adopt sustainable closed-loop systems for waste reduction and valorization is critical. Using organic waste as a feedstock, gasification and pyrolysis systems can produce biooil, syngas, and thermal energy, while reducing waste mass by as much as 85-95% through conversion into biochar, a valuable byproduct with myriad uses from soil conditioning to bioremediation and carbon sequestration. Here, we present a novel case study detailing the circular economy of gasification biochar in Singapore's Gardens by the Bay. Biochar produced from horticultural waste within the Gardens was tested as a partial peat moss substitute in growing lettuce, pak choi, and pansy, and found to be a viable substitute for peat moss. At low percentages of 20-30% gasification biochar, fresh weight yields for lettuce and pak choi were comparable to or exceeded those of plants grown in pure peat moss. The biochar was also analyzed as a potential additive to concrete, with a 2% biochar mortar compound found to be of suitable strength for non-structural functions, such as sidewalks, ditches, and other civil applications. These results demonstrate the global potential of circular economies based on local biochar creation and on-site use through the valorization of horticultural waste via gasification, generating clean, renewable heat or electricity, and producing a carbon-neutral to -negative byproduct in the form of biochar. They also indicate the potential of scaled-up pyrolysis or gasification systems for a circular economy in waste management.

Remediation of noxious pollutants using nano-titania-based photocatalytic construction materials: a review

Nano-titania (n-TiO₂), due to its unique photocatalytic and hydrophobic properties, can be used to prepare self-cleaning cement-based smart building materials. The n-TiO₂ degrades organic and inorganic pollutants through its photocatalytic action and convert them into non-toxic byproducts, i.e., improves the air quality. In this review, aspects such as methodologies of n-TiO₂ synthesis, approaches for n-TiO₂ loading on cementitious materials, photocatalytic properties, self-cleaning mechanism, and application of n-TiO₂ in cement-based materials have been overviewed. Further, the n-TiO₂ can be used either as coatings or admixtures in pavement blocks, mortars/concrete at zebra crossings, road dividers and linings, and high rise buildings. Moreover, the implications and economic aspects of n-TiO₂ usage in cement-based materials revealed that n-TiO₂ increases the material cost by ~ 27%, (101 to 128.1$) in comparison to conventional building materials. Furthermore, the low-cost carbonized materials such as biochars have been suggested to be used as support of n-TiO₂ to lower the cost and improve the remediation efficiency of photocatalytic concrete.

Biochar industry to circular economy

Biochar, produced as a by-product of pyrolysis/gasification of waste biomass, shows great potential to reduce the environment impact, address the climate change issue, and establish a circular economy model. Despite the promising outlook, the research on the benefits of biochar remains highly debated. This has been attributed to the heterogeneity of biochar itself, with its inherent physical, chemical and biological properties highly influenced by production variables such as feedstock types and treating conditions. Hence, to enable meaningful comparison of results, establishment of an agreed international standard to govern the production of biochar for specific uses is necessary. In this study, we analyzed four key uses of biochar: 1) in agriculture and horticulture, 2) as construction material, 3) as activated carbon, and 4) in anaerobic digestion. Then the guidelines for the properties of biochar, especially for the concentrations of toxic heavy metals, for its environmental friendly application were proposed in the context of Singapore. The international status of the biochar industry code of practice, feedback from Singapore local industry and government agencies, as well as future perspectives for the biochar industry were explained.

Improvement effect of pyrolyzed agro-food biochar on the properties of magnesium phosphate cement

This study extends the application of pyrolyzed biochar and investigates its influence on the mechanical, sorption and microstructure properties of magnesium phosphate cement mortar. Biochar was produced by the pyrolysis of wheat straw biomass by controlled burning and its replacement level was kept up to 1.5%. At the age of 30 days, the compressive and flexural strength of mortar containing 1.5% biochar was 17.3% and 9.0% higher as compared to the control mortar, which was associated with the micro-filler and internal reservoir effect of biochar particles. Inclusion of biochar considerably improved the resistance of magnesium phosphate cement in the water environment. Sorptivity and water absorption of mortar containing 1.5% biochar was reduced by 33.8% and 25% respectively than the control mortar. Biochar densified the microstructure of mortars by filling the microcracks and blocking the pores. X-ray diffraction and Fourier transform infrared spectroscopy did not provide any information about the formation of new hydration products. Elemental analysis of mortar samples using energy dispersive spectroscopy showed the presence of some elements, which indicates the possibility of new hydration products. Based on the positive results in this study, future study will include the detailed chemical effect of biochar on magnesium phosphate cement.

Evaluation of change in biochar properties derived from different feedstock and pyrolysis temperature for environmental and agricultural application

In recent years, the application of biochar has increased significantly for sustainable and efficient carbon sequestration, improving soil quality and enhancement of plant growth. The biochar is mostly made from agricultural residues and waste materials. The objective of this study was to assess the changes in physicochemical, surface morphology, and mineral composition of different biochars with varying pyrolysis temperature. Eighteen different types of biochars were prepared through pyrolysis of feedstock at four different temperatures (350 °C, 450 °C, 550 °C and 650 °C). The feedstock used for the preparation of biochar were organic waste materials such as pine saw dust, rice husk, food waste, poultry litter and paper sludge. Pyrolysis temperatures and feedstock types significantly influenced biochar properties. For instance, pH of poultry litter and paper sludge biochar has increased from 6.2 to 10.3, BET surface area of saw dust and rice husk increased from 3.39 to 443.79 m² g^-1 and 11.61 to 280.97 m² g^-1 while cation exchange capacity value decreased with the increase in temperature. Paper sludge and poultry litter had the highest ash content value (57.20 ± 0.02 and 44.10 ± 0.02) whereas saw dust, rice husk and food waste biochar have highest fixed carbon value (55.31 ± 0.15, 48.47 ± 0.31 and 58.85 ± 0.22) at 650 °C. Degree of aromaticity increased and polarity reduced significantly with pyrolysis temperature. Rice husk and saw dust biochar prepared at higher temperature were more stable among all and thus recalcitrant in nature. X-ray diffraction results revealed mineral like quartz in saw dust and poultry litter biochar, sylvite, potassium iodate, calcium sulfide in food waste biochar and calcium carbonate in paper sludge biochar. Scanning Electron Microscopy showed increase in number of pores as well as pore size specially for the saw dust, and rice husk biochar. This study suggested that biochar prepared at higher temperature (550 °C and 650 °C) are more suitable for carbon sequestration and agricultural purpose.

Recent advances on the sustainable approaches for conversion and reutilization of food wastes to valuable bioproducts

The increasing amounts of food wastage and accumulation generated per annum due to the growing human population worldwide often associated with environmental pollution issues and scarcity of natural resources. In view of this, science community has worked towards in finding sustainable approaches to replace the common practices for food waste management. The agricultural and food processing wastes rich in nutrients are often the attractive substrates for the bioconversion for valuable bioproducts such as industrial enzymes, biofuel and bioactive compounds. The sustainable approaches on the re-utilization of food wastes as the industrial substrates for production of valuable bioproducts has meet the goals of circular bioeconomy, results in the diversify applications and increasing market demands for the bioproducts. This review discusses the current practice and recent advances on reutilization of food waste for bioconversion of valuable bioproducts from agricultural and food processing wastes.