Zeolite powder based polyurethane sponges as biocarriers in moving bed biofilm reactor for improving nitrogen removal of municipal wastewater

Effects of polyculture on nutrient removal from residential raw sewage using field-scale artificial floating islands

Nutrient pollution poses a significant challenge to global water bodies, particularly from non-point sources due to their diffuse nature. This study investigated the effectiveness of Artificial Floating Islands (AFIs) as a phytoremediation technology to address this issue. We constructed and monitored a field-scale AFI system in the equalization basin of a wastewater treatment plant for preliminary treatment of residential raw sewage. Focusing on a polyculture of two native aquatic plants - Carex comosa (bristly sedge) and Eleocharis obtusa (blunt spike-rush) - we assessed how polyculture influenced nutrient assimilation and evaluated the overall performance of polyculture AFI systems under natural conditions. Our results showed that polyculture simultaneously affected plants' capacity of nutrient assimilation and biomass production. The potential competition within the polyculture systems promoted the growth of C. comosa while suppressing E. obtusa. The enhanced nutrient assimilation in C. comosa plant tissues was mainly attributed to its increased biomass production. Additionally, we observed a negative correlation between pH and the storage of total oxidized nitrogen (NO2- + NO3-), ammonium (NH4+), and orthophosphate (PO43-), with the highest nutrient storage occurring at a near-neutral pH of 7.5. Environmental factors such as pH and water temperature interacted with the effects of polyculture on nutrient assimilation, with C. comosa in polyculture systems showing the highest sensitivity to these factors. Throughout the study, polyculture AFIs exhibited the highest nutrient assimilation, with peak values of 2968 mg/m2 for NH4+, 1767 mg/m2 for PO43-, and 12 mg/m2 for NO2- + NO3-, outperforming the two monoculture AFIs. Notably, nutrient assimilation in polyculture AFI systems did not average the performance of monoculture systems but demonstrated higher values and greater robustness under varying environmental conditions. These findings highlight the potential of using polyculture to extend the operational lifespan, enhance performance, and reduce the constructional costs of field-scale AFI systems for managing nutrient pollution.

How does carbon to nitrogen ratio and carrier type affect moving bed biofilm reactor (MBBR): Performance evaluation and the fate of antibiotic resistance genes

With the spread of antibiotic resistance genes (ARGs) in the environment, monitoring and controlling ARGs have become an emerging issue of concern in biological processes. Moving bed biofilm reactors (MBBR) have been gaining attention for application in wastewater treatment. Since the performance of MBBR depends on operational parameters and biocarriers, selection of suitable biocarriers and start-up conditions are vital for efficiency of MBBRs. This study investigates the effects of different carbon-to-nitrogen (C/N) ratios and carrier types on the fate of selected ARGs and microbial communities in four MBBR systems using two conventional (K3 and sponge biocarrier (SB)) and two modified carriers (Fe-Ca@SB and Ze-AC@SB). Results showed that the modified biocarriers achieved higher NH4-N removal and better simultaneous nitrification and denitrification (SND) performance (90%) at C/N of 20. However, as the C/N ratio decreased to 10 and 7, the performance of all bioreactors was approximately similar. Moreover, COD removal of 90% was achieved in all reactors regardless of C/N ratio and carrier type. Further studies on the fate of selected ARGs (tetA, blaTEM, ampR) showed that the C/N ratio could affect the abundance of target ARGs, especially for K3 biocarrier, with tetA being the most abundant gene. Also, as the C/N ratio decreased, intl1 was enriched using K3 and SB. However, for Ze-AC@SB, the increase in the abundance of ARGs and intl1 was the lowest making it a reliable carrier not only in MBBR performance but in the control of ARGs. Metagenomic studies showed that the C/N ratio and carrier type could alter the diversity and structure of the bacterial communities in different MBBR systems, with Proteobacteria being the most abundant phylum in all four systems.

Enhancement of aerobic denitrification process on antibiotics removal: Mechanism and efficiency: A review

Traditionally, the removal of nitrogenous pollutants from wastewater relied on conventional anaerobic denitrification as well as aerobic nitrification and anoxic denitrification. However, anaerobic denitrification is complicated since it requires stringent environmental conditions as well as a large land, therefore, denitrification and nitrification were performed in two separate reactors. Although high pollutant removal efficiency has been achieved via aerobic nitrification and anoxic denitrification, the demerits of this approach include high operational costs. Other traditional nitrogen removal methods include air stripping, reverse osmosis, adsorption, ion exchange, chemical precipitation, advanced oxidation process, and breakpoint chlorination. Traditional nitrogen removal methods are not only complicated but they are also uneconomical due to the high operational costs. Researchers have discovered that denitrification can be carried out by heterotrophic nitrification-aerobic denitrification (HNAD) microorganisms which remove nitrogen in a single aerobic reactor that does not require stringent operating conditions. Despite the significant effort that researchers have put in, there is still little information known about the mechanisms of antibiotic removal during HNAD. This review begins with an update on the current state of knowledge on the removal of nitrogenous pollutants and antibiotics from wastewater by HNAD. The mechanisms of antibiotic removal via HNAD were examined in detail. Followed by, the enhancement of antibiotics removal via co-metabolism and oxidation of sulfamethoxazole (SMX) as well as the response of microbial communities to antibiotic toxicity. Lastly, the conditions favorable for antibiotic biodegradation and mechanisms for nitrogen removal via HNAD were examined. The findings in this review show that co-metabolism and oxidation of SMX were the main antibiotic biodegradation mechanisms, pathways for antibiotic removal by co-metabolism and oxidation of SMX were also proposed in the discussion. This research indicated the potential of aerobic denitrification in the removal of antibiotics from wastewater. Understanding the mechanisms and pathways of antibiotic removal by HNAD helps wastewater engineers and researchers apply the technology more efficiently. PRACTITIONER POINTS: The mechanisms of antibiotic removal via HNAD were examined in detail. Co-metabolism and oxidation of SMX were the main antibiotic biodegradation mechanisms. Pathways for antibiotic removal by co-metabolism and oxidation of SMX were also proposed. Conditions favorable for antibiotic biodegradation were examined. This research indicated the potential of aerobic denitrification in the removal of antibiotics from wastewater.

Bacterial community dynamics in a biofilm-based process after electro-assisted Fenton pre-treatment of real olive mill wastewater

In this work, the effect of the electro-assisted Fenton (EAF) process on the bacterial community of a moving bed biofilm reactor (MBBR) for olive mill wastewater (OMW) co-treatment with urban wastewater (UWW) was investigated. According to metagenomic analysis, pre-treatment by EAF, while removing total phenols (TPHs) up to 84 % ± 3 % and improving biodegradability of OMW from 0.38 to 0.62, led to the emergence of bacterial genera in the MBBR (R2) that were not detected under conditions without pre-treatment (R1). Indeed, in that condition, Candidatus Competibacter replaced Amaricoccus as dominant denitrifying bacteria. In both cases, the bacterial community composition matched with high simultaneous nitrification-denitrification efficiency (up to 98 %). Finally, Chlorobium (2.5-4.1 %), sulphate-reducing bacteria and Geobacter (up to 1.6 ± 0.4 %), anaerobic bacteria that utilise iron oxides, were observed exclusively with EAF application, suggesting potential for the development of new integrated microbial electrochemical systems.

Revealing microbial compatibility of partial nitritation/Anammox biofilm from sidestream to mainstream applications: Origins, dynamics, and interrelationships

Biofilms offer a solution to the challenge of low biomass retention faced in mainstream partial nitritation/Anammox (PN/A) applications. In this study, a one-stage PN/A reactor derived from initial granular sludge was successfully transformed into a biofilm system using shedding carriers. Environmental stressors, such as ammonium nitrogen concentration and organic matter, significantly affected the competitive dynamics and dominant species composition between Ca. Kuenenia and Ca. Brocadia. Under approximately 500 mg/L NH4+-N, Ca. Brocadia emerged as the dominant anammox bacteria species, but was subsequently replaced by Ca. Kuenenia in the presence of approximately 54 mg COD/L CH3COONa. Moreover, Chloroflexi species on the original biofilm exhibited an associated relationship with the growth of Ca. Kuenenia in new biofilm. The biofilm assembly and microbial community migration uniquely reveal the microbial niche dynamics. This study provides valuable insights for PN/A biofilm applications facing diverse challenges of environmental stresses in the transition from sidestream to mainstream.

Treatment and prediction of wastewater from waste transfer station in the eastern rural area of China by a combined system of anaerobic-oxic-anoxic-oxic, coagulation and adsorption

In this study, a combined system of anaerobic-oxic-anoxic-oxic, coagulation and adsorption (AOAOCA) was used to treat the real waste transfer station (WTS) wastewater. The effects of hydraulic retention time (HRT), sludge reflux ratio (SRR), mixed liquid reflux ratio (MLRR), coagulant and zeolite on the contaminants removal efficiency were investigated. When the AOAOCA system was operated at the optimal conditions (HRT of 8 d, SRR of 70%, MLRR of 200%, PAFC as coagulant with dosage of 750 ppm and 1-3 mm zeolite with filling rate of 60%), the effluent COD, NH3-N and TP could reach 82.5 mg/L, 3.7 mg/L and 1.8 mg/L with the highest removal rates of 98.7%, 99.4% and 98.8%, respectively. The effluent of AOAOCA system could meet the "Pollution Control Standard for Domestic Garbage Landfill of China" (GB16889-2024). The greatest contribution to the COD, NH3-N and TP removal rates were from the anaerobic-oxic-anoxic-oxic process (91.2%-97.4%), while the contribution of coagulation and zeolite were 1.8%-6% and 0.8%-2.8%, respectively. The operating cost for WTS wastewater treatment by the proposed AOAOCA system was 17.72 RMB/t based on the costs for electricity, reagent and tap water consumption. The XGBoost model could be effectively used to predict the effluent of the proposed AOAOCA. This study could provide a highly feasible reference about the treatment of WTS wastewater for practical application.

Versatile enhancement for anaerobic moving bed biofilm (AnMBBR) treating pretreated landfill leachate by hydrochar: Energy recovery, greenhouse gas emission reduction and underlying microbial mechanisms

Hydrochars were prepared from fruit peels (HC-1) and vegetable waste (HC-2), and combined with fiber spheres, respectively, to form homogeneous biocompatible carriers, which were used for anaerobic moving bed biofilm reactor (AnMBBR) to enhance anaerobic digestion (AD) performance and energy recovery of landfill leachate treatment. Compared with the control AnMBBR with conventional fiber spheres as carriers, the chemical oxygen demand (COD) removal efficiency of the AnMBBR with HC-2 increased from 75 % to 88 %, methane yield increased from 77.7 mL/g-COD to 155.3 mL/g-COD, and achieved greenhouse gases (GHG) emission reductions of 1.74 t CO2 eq/a during long-term operation. HC-2-fiber sphere biocarriers provided more sites for attached-growth biomass (AGBS) and significantly enhanced the abundance of functional microbial community, with the relative abundance of methanogenic bacteria Methanothrix increased from 0.03 % to over 24.4 %. Moreover, the gene abundance of most the key enzymes encoding the hydrolysis, acidogenesis and methanogenesis pathways were up-regulated with the assistance of HC-2. Consequently, hydrochar-assisted AnMBBR were effective to enhance methanogenesis performance, energy recovery and carbon reduction for high-strength landfill leachate treatment.

Biofilm formation and microbial interactions in moving bed-biofilm reactors treating wastewater containing pharmaceuticals and personal care products: A review

The risk of pharmaceuticals and personal care products (PPCPs) has been paid more attention after the outbreak of COVID-19, threatening the ecology and human health resulted from the massive use of drugs and disinfectants. Wastewater treatment plants are considered the final stop to restrict PPCPs from wide spreading into the environment, but the performance of conventional treatment is limited due to their concentrations and characteristics. Previous studies have shown the unreplaceable capability of moving bed-biofilm reactor (MBBR) as a cost-effective method with layered microbial structure for treating wastewater even with toxic compounds. The biofilm community and microbial interactions are essential for the MBBR process in completely degrading or converting types of PPCPs to secondary metabolites, which still need further investigation. This review starts with discussing the initiation of MBBR formation and its influencing parameters according to the research on MBBRs in the recent years. Then the efficiency of MBBRs and the response of biofilm after exposure to PPCPs are further addressed, followed by the bottlenecks proposed in this field. Some critical approaches are also recommended for mitigating the deficiencies of MBBRs based on the recently published publications to reduce the environmental risk of PPCPs. Finally, this review provides fundamental information on PPCPs removal by MBBRs with the main focus on microbial interactions, promoting the MBBRs to practical application in the real world of wastewater treatment.

Enhance PD/A biofilm formation via a novel biochar/tourmaline modified-biocarriers to treat low-strength contaminated surface water: Initial adhesion and high-substrate microenvironment

In this work, a novel polyurethane carrier modified with biochar and tourmaline/zeolite powder at ratio of 1:1 and 1:2 was developed to promote the formation of biofilms and the synergy of overall bacterial activity for Partial Denitrification/Anammox to treat low-nitrogen contaminated surface water. Based on the batch experiment, the modified biocarrier, BTP2 (biochar: tourmaline = 2: 1), exhibited the highest total nitrogen removal efficiency (83.63%) under influent total nitrogen of 15 mg/L and COD/NO3- of 3. The dense biofilm was formed in inner side of biocarrier owing to the increased surface roughness and various functional groups suggested by scanning electron microscopy and Fourier-transform infrared analysis. The EPS content increased from 200.15 to 220.26 mg/g VSS in BTP2 system. Besides, the rapid NH4+ capture and organics release of the modified carrier fueled the growth of anammox and denitrification bacteria, with the activity of 2.13 ± 0.52 mg N/gVSS/h and 6.70 ± 0.52 mg N/gVSS/h (BTP2). High-throughput sequencing unraveled the increased abundances of Candidatus_Competibacter (0.82%), Thauera (0.60%) and Candidatus_Brocadia (0.55%) which was responsible for the synergy of incomplete reduction of NO3- to NO2- and NH4+ oxidation. Overall, this study provided a valid and simple-control guide for biofilm formation towards rapid enrichment and great collaboration of Anammox and denitrification bacteria.

Efficient nitrogen removal by multi-stage A/O mud membrane composite process with segmented influent: Performance and microbial community structure

In this paper, a multi-stage A/O mud membrane composite process with segmented influent was constructed for the first time and compared with the traditional activated sludge process and the multi-stage A/O pure membrane process with segmented influent. The nitrogen removal efficiency of the process under different influencing factors was studied. Under the optimum conditions, the highest removal rate of ammonia nitrogen can reach 99%, and the average removal rate of total nitrogen was 80%. The removal rate of COD in effluent reached 93%. The relative abundance of Proteobacteria was the highest in the multi-stage A/O mud membrane composite reactor with segmented influent. The community diversity and richness of activated sludge and biofilm in aerobic pool were the highest. Dechloromonas, Flavobacterium and Rhodobacter were dominant bacteria, and they were aerobic denitrifying bacteria that significantly contributed to the removal rate of ammonia nitrogen.

Advanced electrolysis sulfur-based biofiltration for simultaneous total nitrogen removal and estrogen toxicity reduction from low carbon-to-nitrogen ratio wastewater

A sulfur-based biofilter enhanced by phosphate modified activated carbon as particle electrodes was constructed to simultaneously remove total nitrogen (TN) and estrogen from low carbon-to-nitrogen ratio (C/N) wastewater containing 1 mg/L 17-alpha-ethinylestradiol (EE2). Results showed that the enhanced biofilter achieved outstanding performance in EE2 removal (93.2 %) and TN reduction (effluent < 5 mg/L), demonstrating robustness against C/N fluctuations. It was noteworthy that it successfully reduced both acute toxicity (59.5 %) and estrogenic activity (88.6 %). Comprehensive characterization investigations and microbial community structure analysis revealed that enhanced electron transfer and increased microbial abundance likely contributed to improved biofilter performance. Core microorganisms, such as Pseudomonas and Chryseobacterium were identified as key contributors to synergistic estrogen degradation and denitrification. This study presented a feasible and promising strategy of combined process with three-dimensional electrodes and sulfur-based biofilter, highlighting substantial potential for advanced purification and safe reuse of wastewater.

Novel flocking materials as biocarriers in moving bed biofilm reactor for improving simultaneous nitrification and denitrification performance

Biocarrier is the key factor for the stable operation of moving bed biofilm reactor (MBBR). To achieve efficient simultaneous nitrification and denitrification (SND), this study provided novel flocking materials as biocarriers. The biofilm formation experiment showed that longer flocking carrier was more conducive to biomass accumulation, resulting in greater oxygen uptake rate. The continuous operation results showed that the total nitrogen removal and SND performance of the MBBR with the addition of 5.0 mm flocking carriers reached 52.0 % and 70.5 %, respectively, which were 29.1 % and 33.3 % greater than those of the control. Compared with those in suspended sludge, the extracellular polymeric substances and protein components in the biocarrier were more abundant. Furthermore, the relative abundance of genera related to denitrification and the nitrogen metabolic sequence improved with the addition of the novel flocking biocarriers. This study demonstrated the effectiveness of novel flocking fillers in improving the performance of MBBR.

Revisiting the Engineering Roadmap of Nitrate/Nitrite-Dependent Anaerobic Methane Oxidation

Nitrate/nitrite-dependent anaerobic oxidation of methane (n-DAMO) is a recently discovered process, which provides a sustainable perspective for simultaneous nitrogen removal and greenhouse gas emission (GHG) mitigation by using methane as an electron donor for denitrification. However, the engineering roadmap of the n-DAMO process is still unclear. This work constitutes a state-of-the-art review on the classical and most recently discovered metabolic mechanisms of the n-DAMO process. The versatile combinations of the n-DAMO process with nitrification, nitritation, and partial nitritation for nitrogen removal are also clearly presented and discussed. Additionally, the recent advances in bioreactor development are systematically reviewed and evaluated comprehensively in terms of methane supply, biomass retention, membrane requirement, startup time, reactor performance, and limitations. The key issues including enrichment and operation strategy for the scaling up of n-DAMO-based processes are also critically addressed. Moreover, the challenges inherent to implementing the n-DAMO process in practical applications, including application scenario recognition, GHG emission mitigation, and operation under realistic conditions, are highlighted. Finally, prospects as well as opportunities for future research are proposed. Overall, this review provides a roadmap for potential applications and further development of the n-DAMO process in the field of wastewater treatment.

Effect of antibiotics on the performance of moving bed biofilm reactor for simultaneous removal of nitrogen, phosphorus and copper(II) from aquaculture wastewater

Co-existence of NO3--N, antibiotics, phosphorus (P), and Cu2+ in aquaculture wastewater has been frequently detected, but simultaneous removal and relationship between enzyme and pollutants removal are far from satisfactory. In this study, simultaneous removal of NO3--N, P, antibiotics, and Cu2+ by moving bed biofilm reactor (MBBR) was established. About 95.51 ± 3.40% of NO3--N, 61.24 ± 3.51% of COD, 18.74 ± 1.05% of TP, 88% of Cu2+ were removed synchronously in stage I, and antibiotics removal in stages I-IV was 73.00 ± 1.32%, 79.53 ± 0.88%, 51.07 ± 3.99%, and 33.59 ± 2.73% for tetracycline (TEC), oxytetracycline (OTC), chlortetracycline hydrochloride (CTC), sulfamethoxazole (SMX), respectively. The removal kinetics and toxicity of MBBR effluent were examined, indicating that the first order kinetic model could better reflect the removal of NO3--N, TN, and antibiotics. Co-existence of multiple antibiotics and Cu2+ was the most toxicity to E. coli growth. Key enzyme activity, reactive oxygen species (ROS) level, and its relationship with TN removal were investigated. The results showed that enzymes activities were significantly different under the co-existence of antibiotics and Cu2+. Meanwhile, different components of biofilm were extracted and separated, and enzymatic and non-enzymatic effects of biofilm were evaluated. The results showed that 70.00%- 94.73% of Cu2+ was removed by extracellular enzyme in stages I-V, and Cu2+ removal was mainly due to the action of extracellular enzyme. Additionally, microbial community of biofilm was assessed, showing that Proteobacteria, Bacteroidetes, and Gemmatimonadetes played an important role in the removal of NO3--N, Cu2+, and antibiotics at the phylum level. Finally, chemical bonds of attached and detached biofilm were characterized by X-ray photoelectron spectroscopy (XPS), and effect of nitrogen (N) and P was proposed under the co-existence of antibiotics and Cu2+. This study provides a theoretical basis for further exploring the bioremediation of NO3--N, Cu2+, and antibiotics in aquaculture wastewater.

Effect of biofilm thickness on the activity and community composition of phosphorus accumulating bacteria in a moving bed biofilm reactor

Can biofilms enhance the rates of phosphorus removal in wastewater treatment? In order to narrow the scientific gap on the effect of biofilm thickness on the activity and microbial community of phosphorus-accumulating bacteria, this study investigated biofilms of 30 to 1000 µm thickness in a moving bed biofilm reactor. Measurements on 5 different biofilm carriers showed that biomass-specific phosphorus release and uptake rates increased as a function of biofilm thickness for biofilms thinner than about 110 µm but were lower for thicker biofilms of about 550-1000 µm. The reduced phosphorus uptake and release rates in the thickest biofilms can result from substrate mass transfer limitations whereas the low activity in the thinnest biofilms can be related to a too high turnover rate in the biofilm due to heterotrophic growth. Additionally, the microbial ecology of the different biofilms confirms the observed phosphorus uptake and release rates. The results from the full-length 16S rRNA gene sequencing of the bacterial community showed that the thicker biofilms were characterized by higher relative abundance (40-58%) of potential phosphorus accumulating genera Zoogloea, Acinetobacter, Dechloromonas and Ca. Accumulibacter. In contrast, the thinner biofilms were dominated by the genus Ferribacterium (34-60%), which might be competing with phosphorus-accumulating bacteria as indicated by the relatively high acetate uptake rates in the thinner biofilms. It is concluded that there is an optimal biofilm thickness of 100-500 µm, at which the phosphorus accumulating bacteria have the highest activity.

Integrating electrochemical pre-treatment with carrier-based membrane bioreactor for efficient treatment of municipal waste transfer stations leachate

An integrated process of electrochemical pre-treatment with carrier-based membrane bioreactor (MBR) was constructed for fresh leachate from waste transfer stations with high organic and NH₄⁺-N content. Results showed that within a hydraulic retention time 40 h, the removal efficiencies of chemical oxygen demand (COD), NH₄⁺-N, suspended solids (SS) and total phosphorus (TP) were over 98.5%, 91.2%, 98.3% and 98.4%, respectively, with the organic removal rate of 18.7 kg/m³. The effluent met the Grade A Standard of China (GB/T31962-2015). Pre-treatment contributed about 70 % of the degraded refractory organics and almost all the SS, with the transformation of the humic-like acid to readily biodegradable organics. Biotreatment further removed over 50% of nitrogen pollutants through simultaneous nitrification and denitrification (SND) and consumed about 30% of organics. Meanwhile, the addition of carriers in the oxic MBR enhanced the attached biomass and denitrification enzyme activity, alleviating membrane fouling.

Performance and mechanism of simultaneous nitrification and denitrification in zeolite spheres internal loop airlift reactor

An internal loop airlift reactor was constructed with zeolite spheres as biofilm carriers (ZS-ALR), and the performance and mechanism of nitrogen removal were investigated. The results indicated that the TN, NH₄⁺-N and TOC removal efficiencies of ZS-ALR reached 96.12%, 100% and 94.54% under appropriate conditions (HRT of 6-8 h, aeration rates of 80-120 mL/min, C/N ratios of 4-6), and the highest TN removal rate constant was 0.01156 min^-1. Further investigating the influence of ammonia-N concentrations on nitrogen removal and biofilm stability revealed that catabolism was important in TN removal, and the prominent genera for nitrogen removal included Sphaerotilus (42.20%), Flavobacterium (17.47%) and Fusibacter (6.14%). Meanwhile, the abundance of amoA, napA, narG and nosZ genes was markedly influenced by ammonia-N concentrations. The nitrogen removal of ZS-ALR was mainly through ammonia-N adsorption by zeolite spheres and simultaneous nitrification and denitrification by biofilm.

Optimization of synthetic domestic wastewater treatment performance in anoxic/aerobic sequencing batch reactor with zeolite addition

In this study, treatment performance was investigated based on chemical oxygen demand (COD), ammonium nitrogen (NH4+-N), total inorganic nitrogen (TIN) and simultaneous nitrification and denitrification (SND) parameters in a zeolite-added anoxic/aerobic sequencing batch reactor. Response surface methodology (RSM) was used to model treatment performance, determine the impact of operating conditions, and optimize them. The effect of zeolite size, dosage and COD/NH4+-N (C/N) ratio as operating parameters were evaluated in the central composite design (CCD). Variance analysis (ANOVA) results of the quadratic model, high coefficients of determination and low values of the root mean square error (RMSE) for dependent variables indicated the validity of the model in predicting experimental results. The desirability function showed that optimum conditions were 0.80 mm for zeolite size, 3.05 g/L for zeolite dosage and 9.8 for C/N. Under these conditions, the maximum COD, NH4+-N, TIN removal efficiencies and SND efficiency were 92.85%, 93.3%, 77.33% and 82.96%, respectively. The results of the study showed that the most effective independent variable on dependent variables was the C/N ratio.

Enhanced bio-affinity of magnetic QD-P(St-GMA)@Fe3O4 micro-particles via surface-quaternized modification

In this work, a kind of bio-carrier quaternized-polystyrene-polyglycidyl methacrylate@Fe₃O₄ (QD-P(St-GMA)@Fe₃O₄, QD-PSGF) micro-particles was successfully prepared by modifying PSGF micro-particles through a hydrothermal method. The quaternary ammonium group and surface structure of QD-PSGF were confirmed through several characterization methods. We directly verified the efficacy of the quaternary ammonium group in promoting microbial activity due to QD-PSGF being synthesized by a hydrothermal method without changing the surface topography and pore. The bio-affinity of QD-PSGF microspheres was evaluated by bacterial adhesion and anaerobic digestion experiments. The results showed that a little quaternary ammonium group can increase bacterial adhesion by about 2-3 times and methane production by 40%. The novel developed QD-PSGF micro-particles can be a promising material as a biofilm carrier for bio-application.

Elucidating the performance of integrated anoxic/oxic moving bed biofilm reactor: Assessment of organics and nutrients removal and optimization using feed forward back propagation neural network

A lab-scale integrated anoxic and oxic (A/O) moving bed biofilm reactor (MBBR) was investigated for the removal of organics and nutrients by varying chemical oxygen demand (COD) to NH₄-N ratio (C/N ratio: 3.5, 6.75, and 10), hydraulic retention time (HRT: 6 h, 15 h, and 24 h), and recirculation ratio (R: 1, 2, and 3). The use of activated carbon coated carriers prepared from waste polyethylene material and polyurethane sponges attached to a cylindrical frame in the integrated A/O MBBR increased the attached growth biomass significantly. >95 % of COD removal was observed under the C/N ratio of 10 at an HRT of 24 h. While the low C/N ratio favored the removal of NH₄-N (∼98 %) and PO₄^3--P (∼90 %) with an optimal R of 1.75. Using the experimental dataset, to predict and forecast the performance of integrated A/O MBBR, a feed-forward-backpropagation-neural-network model was developed.

Reactivated biofilm coupling n-DAMO with anammox achieved high-rate nitrogen removal in membrane aerated moving bed biofilm reactor

As a promising technology, the combination of nitrate/nitrite-dependent anaerobic methane oxidation (n-DAMO) with Anammox offers a solution to achieve effective and sustainable wastewater treatment. However, this sustainable process faces challenges to accumulate sufficient biomass for reaching practical nitrogen removal performance. This study developed an innovative membrane aerated moving bed biofilm reactor (MAMBBR), which supported sufficient methane supply and excellent biofilm attachment, for cultivating biofilms coupling n-DAMO with Anammox. Biofilms were developed rapidly on the polyurethane foam with the supply of ammonium and nitrate, achieving the bioreactor performance of 275 g N m^-3 d^-1 within 102 days. After the preservation at -20 °C for 8 months, the biofilm was successfully reactivated and achieved 315 g N m^-3 d^-1 after 188 days. After reactivation, MAMBBR was applied to treat synthetic sidestream wastewater. Up to 99.9% of total nitrogen was removed with the bioreactor performance of 4.0 kg N m^-3 d^-1. Microbial community analysis and mass balance calculation demonstrated that n-DAMO microorganisms and Anammox bacteria collectively contributed to nitrogen removal in MAMBBR. The MAMBBR developed in this study provides an ideal system of integrating n-DAMO with Anammox for sustainable wastewater treatment.

Comparison of high-concentration azo dye removal by long HRT in MSBRs' bioaugmented with GAC and sponge media

The present study assessed the performance and fouling of adding granular activated carbon (GAC) and sponge (BioCube), as two different media, to a membrane sequencing batch reactor (MSBR) system in wastewater treatment containing Acid Red 18 (AR 18). Anaerobic phase, aerobic phase, and hydraulic retention times (HRTs) of 24 h, 12 h, and 72 h were considered for 500 mg/L AR 18 removal at a sludge retention time (SRT) of 20 days by separately adding up to 35% BioCube volume and 8 g/L GAC to the reactors. Based on the kinetic study, 63 mg/L (87% removal) and 115 mg/L (77% removal) remaining dye were reported in the GAC and BioCube membrane sequencing batch reactors (GAC-MSBR and BioCube-MSBR), respectively. A gradual oxidation-reduction potential decline toward -416 mV confirmed better dye removal in GAC-MSBR than BioCube-MSBR, observing a sudden drop to -354 mV. The morphology can explain better biological treatment in GAC-MSBR in addition to the adsorption process. Soluble microbial products (SMPs) of 126.92 mg/L and 395.18 mg/L were obtained for GAC-MSBR and BioCube-MSBR, respectively. Chemical oxygen demand (COD) and SMP indicated that the GAC-MSBR water quality is better than that of the other reactor.

Characterization of Biofilm Microbiome Formation Developed on Novel 3D-Printed Zeolite Biocarriers during Aerobic and Anaerobic Digestion Processes

Background: Aerobic or anaerobic digestion is involved in treating agricultural and municipal waste, and the addition of biocarriers has been proven to improve them further. We synthesized novel biocarriers utilizing zeolites and different inorganic binders and compared their efficiency with commercially available biocarriers in aerobic and anaerobic digestion systems. Methods: We examined BMP and several physicochemical parameters to characterize the efficiency of novel biocarriers on both systems. We also determined the SMP and EPS content of synthesized biofilm and measured the adherence and size of the forming biofilm. Finally, we characterized the samples by 16S rRNA sequencing to determine the crucial microbial communities involved. Results: Evaluating BMP results, ZSM-5 zeolite with bentonite binder emerged, whereas ZSM-5 zeolite with halloysite nanotubes binder stood out in the wastewater treatment experiment. Twice the relative frequencies of archaea were found on novel biocarriers after being placed in AD batch reactors, and >50% frequencies of Proteobacteria after being placed in WWT reactors, compared to commercial ones. Conclusions: The newly synthesized biocarriers were not only equally efficient with the commercially available ones, but some were even superior as they greatly enhanced aerobic or anaerobic digestion and showed strong biofilm formation and unique microbiome signatures.

Performance and microbial community of MBBRs under three maintenance strategies for intermittent stormwater treatment

Maintaining microbial activities is a critical problem for biological treatment processes of stormwater runoff because of its intermittent nature. In this study, the suitability of the moving bed biofilm reactor (MBBR) was assessed for stormwater treatment by long-term dry - rainy alternation operation. Three strategies to maintain microbial activities during the dry period, including keeping idle (MBBR_I), introducing river water throughout the period (MBBR_C), and ahead of a rainy day (MBBR_M), were investigated. COD and NH₄⁺-N removal efficiencies declined linearly from 94.2 % and 94.7 % to 51.7 % and 64.6 %, respectively, after the 61-day operation with microbial activity and biomass decreased. Introducing river water adversely affected the process performance as MBBR_C presented the highest declining rates of COD and NH₄⁺-N removal efficiencies. Most genera in MBBRs decayed and their microbial communities developed towards individualization, especially in MBBR_M because of its highest environmental variability. Keeping idle slightly alleviated the performance decline and formed a more stable microbial community structure. However, significantly deteriorating performance in all MBBRs after the long-term operation indicated that MBBRs were unsuitable for treating stormwater independently of intermittent nature.

Enhancement of biological nitrogen removal performance from low C/N municipal wastewater using novel carriers based on the nano-Fe3O4

The aim of this work was to study the effects of the magnetic microparticles (MMP) on nitrogen removal under low C/N conditions. A 30-day anaerobic/oxic progress illustrated that nitrification and denitrification were promoted in the presence of MMP. MMP could facilitate the production of extracellular polymeric substances (EPS) and act as pH buffering in aerobic conditions. The high-throughput sequencing displayed that, compared with the sludge without MMP, the relative abundance of Dokdonella and Comamonas which are capable of both nitrifying and denitrifying were 8.7% and 1.29% higher in anaerobic sludge and 7.11% and 0.97% higher in aerobic sludge with MMP, respectively. The relative abundance of Pseudomonas with the excellent capability of EPS secretion was also observed 4.33 times higher than that without MMP in the aerobic sludge. Based on the superior performance above, MMP is a promising additive to enhance nitrogen removal efficiency for low C/N wastewater.

Simultaneous nitrification-denitrification in biofilm systems for wastewater treatment: Key factors, potential routes, and engineered applications

Simultaneous nitrification-denitrification (SND) is an advantageous bioprocess that allows the complete removal of ammonia nitrogen through sequential redox reactions leading to nitrogen gas production. SND can govern nitrogen removal in single-stage biofilm systems, such as the moving bed biofilm reactor and aerobic granular sludge system, as oxygen gradients allow the development of multilayered biofilms including nitrifying and denitrifying bacteria. Environmental and operational conditions can strongly influence SND performance, biofilm development and biochemical pathways. Recent advances have outlined the possibility to reduce the carbon and energy consumption of the process via the "shortcut pathway", and simultaneously remove both N and phosphorus under specific operational conditions, opening new possibilities for wastewater treatment. This work critically reviews the factors influencing SND and its application in biofilm systems from laboratory to full scale. Operational strategies to enhance SND efficiency and hints to reduce nitrous oxide emission and operational costs are provided.

Hydrophilic spongy biochar crosslinked with starch and polyvinyl alcohol biocarrier for nitrate, phosphorus, and cadmium removal in low carbon wastewater: Enhanced performance mechanism and detoxification

This study aims to develop a functional biocarrier with hydrophilic spongy biochar crosslinked with starch and polyvinyl alcohol (WSB/starch-PVA) for simultaneous removal of NO₃^--N, total phosphorus (TP) and Cd²⁺ in low carbon wastewater. Results showed that the WSB/starch-PVA bioreactor achieved the maximum NO₃^--N removal efficiency in subphase 1.2 with 98.07 % (3.64 mg L^-1h^-1) versus control (75.30 %, 2.81 mg L^-1h^-1), and removed 54.84 % and 73.97 % of TP and Cd²⁺. Material characterization suggested that functional groups (related to C, N and O) on biocarrier and biofilm, and biogenic co-precipitation facilitated TP and Cd²⁺ removal. The WSB made the biocarrier pores larger and regular, and decreased fluorescent soluble microbial products. The predicted metagenome further suggested that central citrate cycle, oxidative phosphorylation of bio-community, and NO₃^--N removal were enhanced. Functions for microbial induced co-precipitation, Cd²⁺ transport/efflux, antioxidants, and enhanced biofilm formation favored the NO₃^--N/TP removal and Cd²⁺ detoxification.

Synergistic denitrification and phosphorus removal performance of a biofilm-microflocculation system and its microbial community variations: A pilot-scale study for a wastewater treatment plant

AIMS

For upgrading and reconstructing a municipal wastewater treatment plant, a biofilm-microflocculation filter system was designed and established towards synergistic improvement of denitrification and phosphorus removal from the secondary effluent.

METHODS AND RESULTS

The establishment of the biofilm-microflocculation filter system underwent several processes, including sludge inoculation, biofilm formation and polyaluminum chloride (PAC) addition as flocculating agent. Microbial community analysis indicated that the dominant denitrification bacteria of the biofilm filter were in the phylum Proteobacteria and the genera Hydrogenophaga and Dechloromonas. On the basis of the initiation of filter system under optimal parameters such as C/N ratio of 5.3, HRT of 1.06 h and PAC of 5 mg·L^-1 , approximately 75% COD, 80% TN and 75% TP could be effectively removed to satisfy discharge standards. Comparing the variations of microbial community structure at the genus level during the operating period of the filter system, it was found that the relative abundance of denitrification bacteria merely shifted from 53.14% to 48.76%, demonstrating that the effect of PAC addition on the main microorganisms is marginal.

CONCLUSIONS

From the above results, it can be verified that the established biofilm-microflocculation filter system has practical and reliable performance for simultaneous biological denitrification and phosphorus removal.

SIGNIFICANCE AND IMPACT OF STUDY

This study provides a reference method for improving the advanced treatment of wastewater plant secondary effluent.

Unveiling organic loading shock-resistant mechanism in a pilot-scale moving bed biofilm reactor-assisted dual-anaerobic-anoxic/oxic system for effective municipal wastewater treatment

Microbial biomass and activity are frequently subjected to organic loading shock (OLS) from decentralized municipal wastewater. A hybrid moving bed biofilm reactor-assisted dual-anaerobic-anoxic/oxic system (D-A²MBBR) was established by integrating dual-anaerobic-anoxic/oxic with moving bed biofilm reactor to resist OLS for stable nutrients removal. The D-A²MBBR achieved 91.57% of chemical oxygen demand, 93.33% of ammonia-nitrogen, 80.20% of total nitrogen and 92.68% of total phosphorus removal, respectively, under the fluctuation of organic loading rate from 417.9 to 812.0 g COD m^-3 d^-1. The 16S rRNA gene sequencing revealed that Gemmobacter (7.28%) was identified as dominating anoxic denitrifying genus in oxic chamber, confirming the coexistence of aerobic and anaerobic/anoxic micro-environments. This circumstance boosted simultaneous nitrification-denitrification and phosphorus removal and the microbial community evolution inside the multilayer biocarrier-attached biofilms. In general, the D-A²MBBR was able to provide unique, cooperative and robust bacterial consortia to form a buffer against OLS, and ensuring effluent stability.

Start-up of mainstream anammox process through inoculating nitrification sludge and anammox biofilm: Shift in nitrogen transformation and microorganisms

The feasibility of starting up mainstream single-stage partial nitrification-anammox (SPNA) system by inoculating nitrification sludge and anammox biofilm was investigated. The SPNA system treating low-strength synthetic wastewater was rapidly started up with TN removal efficiency of 88.5 ± 1.8% and effluent nitrate concentration of 7.2 ± 1.2 mg/L. Both the abundance and maximum activity of nitrite oxidizing bacteria (NOB) in flocs decreased obviously. Interestingly, the abundance of anaerobic ammonium oxidizing bacteria (AnAOB) in flocs increased from 0.213% to 0.346% despite the sludge retention time (SRT) of flocs decreased to 60 days, the AnAOB in biofilm was 0.434%. That meant AnAOB gradually enriched in flocs and accounted for a fairly high proportion. The inhibition of NOB, partial denitrification and increased aerobic_chemoheterotrophy function in flocs might be the main reasons for AnAOB enrichment. The possibility of simultaneous fermentation, partial denitrification and anammox reaction was predicted in biofilm, further improving the stability of the system.

Sustained and enhanced anaerobic removal of COD and nitrogen in a zeolite amended glycogen accumulating organism dominated biofilm process

Activated sludge, the most widely used biological wastewater treatment process is known to be expensive to operate, largely due to energy expense for oxygen transfer into the bulk wastewater solution. The alternative of using passive aeration facilitates oxygen supply directly from the air resulting in aeration energy savings. The current study demonstrated sustained and improved removal of chemical oxygen demand (COD) and nitrogen in a zeolite modified glycogen accumulating organisms (GAOs) dominated biofilm reactor, which achieved anaerobic removal of COD and ammonium by the activity of GAOs and zeolite, respectively. Draining of the batch-operated reactor enabled the biofilm to directly uptake oxygen from air (passive aeration) to carry out simultaneous nitrification and denitrification due to the activity of GAO (Candidatus competibacter) and nitrifying bacteria (Nitrosomonas and Nitrospira). Under stable long-term (4-months) operation, the process achieved COD and nitrogen removal at rates of 1354 and 79.1 g m^-3 d^-1, respectively. The biofilm process demonstrated >90% nitrogen removal efficiency in multi-cycle (4/8 cycles) strategy with a short treatment time of 8 h. Due to the passive aeration scheme, the energy consumption of the proposed wastewater treatment process is calculated to be about 13-times less than that of traditional activated sludge process. Therefore, the Passive Aeration Simultaneous Nitrification and Denitrification (PASND) biofilm process is a promising low-energy treatment step for efficient removal of COD and nitrogen from wastewater.

Bacterial biofilm and extracellular polymeric substances in the moving bed biofilm reactor for wastewater treatment: A review

Among the several biofilm-based bioreactors, moving bed biofilm reactors (MBBR) have been extensively used for wastewater treatment due to low operational costs, technical feasibility, and stability. Biofilm forming strains, e.g., Stenotrophomonas maltophila DQ01, achieved 94.21% simultaneous nitrification and denitrification (SND) and 94.43% removal of total nitrogen (TN) at a cycle time of 7 h, and a biofilm consortium consisting of Chryseobacteriumsp. andRhodobactersp. achieved 86.8% removal of total organic carbon (TOC) at hydraulic retention time (HRT) of 24 h using lab-scale MBBR. Modifications in the surface properties of the biocarrier materials achieved 99.5 ± 1.1% chemical oxygen demand (COD) and 93.6 ± 2.3% NH₄⁺-N removal, significantly higher than the conventional commercial carrier. This review article summarizes the application of MBBR technology for wastewater treatment. The importance of bacterial biofilm and extracellular polymeric substances (EPS), anammox-n-DAMO coupled processes, and carrier surface modifications in MBBR technology have also been discussed.

Role of carrier characteristics affecting microbial density and population in enhanced nitrogen and phosphorus removal from wastewater

This research aims to improve simultaneous nitrification-denitrification and phosphorus removal (SNDPR) using novel carriers and to demonstrate the effect of carrier characteristics on nutrient removal in a biofilm reactor. For this purpose, biofilms enriched with both polyphosphate-accumulating organisms (PAOs) and nitrifiers were cultivated in two parallel sequencing batch reactors containing conventional moving bed bioreactor carriers (MBBR) and a novel type of carriers (carbon-based moving carriers (CBMC)). The new carriers were produced based on recycled waste materials via a chemical-thermal process and their specific surface area were 10.4 times higher than typical MBBR carriers of similar dimensions. The results showed that the use of CBMC carriers increased bacterial adhesion by about 18.5% and also affected the microbial population inside the biofilms, leading to an increase in PAOs abundancy and thus an increase in biological phosphorus removal up to 12.5%. Additionally, it was corroborated that the volume of the anoxic zones with dynamic behavior is strictly influenced by the carrier structure and biofilm thickness due to a limitation in oxygen penetration. Accordingly, the formation of broader anoxic zones and shrinkage of these zones to a lesser extent resulted in the continuation of anoxic reactions for longer periods using the novel carriers. Thereby, an increase in nitrogen removal by about 15% was obtained mainly by denitrifying PAOs. The results also exhibited that a higher simultaneous nitrification-denitrification (SND) efficiency can be achieved by selecting an appropriate aeration program influencing the dynamic changes of anoxic zones. Overall, a biofilm system using the new carriers, with phosphorus and nitrogen removal efficiencies of 97.5% and 92.3%, was presented as an efficient, compact, and simple operation SNDPR process.

Enhanced treatment of organic matter in slaughter wastewater through live Bacillus velezensis strain using nano zinc oxide microsphere

Slaughter wastewater is an important and wide range of environmental issues, and even threaten human health through meat production. A high efficiency and stability microsphere-immobilized Bacillus velezensis strain was designed to remove organic matter and inhibit the growth of harmful bacteria in process of slaughter wastewater. Bacillus velezensis was immobilized on the surface of sodium alginate (SA)/Polyvinyl alcohol (PVA)/Nano Zinc Oxide (Nano-ZnO) microsphere with the adhesion to bio-carrier through direct physical adsorption. Results indicated that SA/PVA/ZnO and SA/ZnO microspheres could inhibit E.coli growth with adding 0.15 g/L nano-ZnO and not affect Bacillus velezensis strain, and the removal the chemical oxygen demand (COD) rates of SA/PVA/ZnO microsphere immobilized cells are 16.99%, followed by SA/ZnO (13.69%) and free bacteria (7.61%) from 50% concentration slaughter wastewater within 24 h at 37 °C, pH 7.0, and 120 rpm, a significant difference was found between the microsphere and control group. Moreover, when the processing time reaches 36 h, COD degradation of SA/PVA/ZnO microsphere is obviously higher than other groups (SA/PVA/ZnO:SA/ZnO:control vs 18.535 : 15.446: 10.812). Similar results were obtained from 30% concentration slaughter wastewater. Moreover, protein degradation assay was detected, and there are no significant difference (SA/PVA/ZnO:SA/ZnO:control vs 35.4 : 34.4: 36.0). The design of this strategy could greatly enhance the degradation efficiency, inhibit the growth of other bacteria and no effect on the activity of protease in slaughter wastewater. These findings suggested that the nano-ZnO hydrogel immobilization Bacillus velezensis system wastewater treatment is a valuable alternative method for the remediation of pollutants from slaughter wastewater with a novel and eco-friendly with low-cost investment as an advantage.

Facial fabricated biocompatible homogeneous biocarriers involving biochar to enhance denitrification performance in an anoxic moving bed biofilm reactor

Biochar prepared from pineapple peel was facially combined with polyurethane sponges for the first time to form homogeneous biocompatible biocarriers, which can enhance denitrification performance in an anoxic MBBR. The experiments showed that a higher NO₃^--N removal efficiency (96.24 ± 1.3%) and kinetic constant (0.26 h^-1) were obtained in the MBBR employing these new biocarriers (B-MBBR), compared with a control MBBR with polyurethane sponges (C-MBBR). The attached and suspended biomass of the B-MBBR was increased by 47% and 26%, respectively. Biochar significantly enhanced the abundance of functional bacteria in terms of promoting biofilm (i.e., Leptonema), denitrifying bacteria (i.e., Thauera, Enterobacter and Pseudomonas) and electroactive bacteria (i.e., Geobacter) in the B-MBBR. Meanwhile, based on the content of coenzyme I (NADH) and denitrifying enzymes, biochar would also enhance electron transport activity for denitrification. Consequently, these facial prepared biocarriers are effective to enhance denitrification performance in MBBR with application significance.

Treatment of municipal wastewater by employing membrane bioreactors combined with efficient nitration microbial communities isolated by Isolation Chip with Plate Streaking technology

In this research, we developed a method so-called Isolation Chip with Plate Streaking (ICPS) to selectively enrich nitrifying microbial consortium for treating municipal wastewater. In batch experiment, these bacterial communities were able to remove NH₃ -N in 72 h with an efficiency of 96%. Firmicutes, Bacteroidetes, and Proteobacteria species are dominant bacteria in these communities. When the bacterial communities were used in the membrane bioreactor under typical condition, the removal efficiency was 81.0%. In contrast, under the actual wastewater condition, the efficiency could reach 91.2%. All above results showed clearly that the consortium selected by our ICPS method could achieve high-efficient NH₃ -N removal, thus offering a reliable technique for screening functional microorganisms in the field of water treatment. PRACTITIONER POINTS: ICPS technology was designed and used for screening specialized NH₃ -N-removing isolates. The screening process benefited the growth of the dominant nitrifying bacteria Firmicutes and Bacteroidetes. When the functional bacteria applied into the MBR, the NH₃ -N removal efficiency was 91.2% under actual wastewater conditions.

High organic removal of landfill leachate using a continuous flow sequencing batch biofilm reactor (CF-SBBR) with different biocarriers

Landfill leachate contains many pollutants that have a negative effect on the environment when improperly discharged. Thus the treatment of landfill leachate is a crucial issue, especially in the bigger cities in developing countries. In this study, landfill leachate is treated using a continuous flow sequencing biofilm batch reactor (CF-SBBR) with different biocarriers (non-carrier (NC), kaldness ^K1 (K1), mutag biochip 30™ (MB), and sponge polyurethane (SP)). The results show that the best COD, TOC, and NH₄⁺-N removal efficiencies were 79.6 ± 0.8%, 78.1 ± 1.9% and 77.5 ± 3.9% in the MB biocarriers tank with an aeration/mixing ratio of 1.3, a cycle time of 9 h and an organic loading rate (OLR) of 1.74 kgCOD/m³.d. The TN removal efficiencies was decreased when there was an increase in the biocarrier's surface area (NC > K1 > MB > SP). At the highest it was 46.1 ± 6.4%, where the aeration/mixing ratio was 1.3, the cycle time was 9 h, and the OLR was 1.52 kgCOD/m³.d. The higher the surface area of the biocarriers, the greater the anti-shock organic loading capacity of the biocarriers due to the formation of biofilm layers. The microbial communities in the CF-SBBR tanks were abundant with common phylum bacteria as in a conventional activated sludge system. Anammox candidatus bacteria was found to total 0.5%. This study concluded that CF-SBBR is an efficient method to treat landfill leachate.

Preparation and performance evaluation of novel magnetic porous carriers in fluidized bed bioreactor for wastewater treatment

Biofilm process is a promising wastewater treatment technology and biofilm carrier (biocarrier) is regarded as the core of this process. However, the traditional commercial biocarriers have their inherent drawbacks, therefore, the development of new-type biocarrier to enhance wastewater treatment efficiency is significantly important to biofilm-based reactors. In this study, based on radical suspension polymerization, a novel kind of magnetic porous carriers (PMCs) was prepared by modifying the porous polymer carriers (PPCs) with inorganic particles, and then applied in a fluidized bed bioreactor (FBBR) with a low packing ratio of 10 % (v/v) to synthetic wastewater treatment. The results showed that this novel biocarrier possesses paramagnetism with saturation magnetization of 1.01emu/g, low density (1.26 g/cm³), excellent hydrophilicity (surface water contact angle approaching zero) and rough surface. Besides, compared with the PPCs, the developed PMCs have larger pores (up to 50 μm or more), in which the larger-sized microbes are able to colonize. Moreover, as compared to the PPCs-based FBBR, the PMCs-based reactor achieved shorter time (7 days) for biofilm formaiton and significantly enhanced NH₃-N removal efficiency ( nearly 20 % increase at the level of influent NH₃-N concentration about 100 mg/L). High-throughput sequencing (HTS) results indicated that this new biocarrier could promote biodiversity and improve the abundance of Nitrosomonadales (the functional bacteria for ammonia removal in the bio-system), thus enhancing the ammonification process. Therefore, the developed PMCs could be preferable biocarriers for biofilm formation and provide an alternative to the traditional suspended biocarrier, demonstrating a promising potential, even at a lower filling ratio, to enhance the pollutants removal performance.

Simultaneous nitrification and denitrification in continuous flow MBBR with novel surface-modified carriers

ABSTRACTMoving-Bed Biofilm Reactor (MBBR) process is an ideal preference for simultaneous nitrification and denitrification (SND) attributing to the longer sludge age and aerobic/anoxic microenvironment along biofilm. However, conventional carriers generally exhibit negative charge and surface hydrophobicity, which are unbeneficial for biofilm formation. In this study, novel surface-modified carriers with favourable hydrophilicity (surface contact angle dropped to 60.2 ± 2.3°) and positive surface charge (+11.7 ± 1.1 mV, pH 7.0) were prepared via polymer blending and implemented for SND in continuous flow MBBR system. Results indicated SND started up quickly with more biomass in MBBR filled with surface-modified carriers. At the operation condition of low dissolved oxygen level (0.75 ± 0.25 mg/L), pH of 7.5 ± 0.5, 23 ± 2°C and C/N ratio of 7, COD, NH₄⁺-N and TN removal efficiencies were 90.5%, 88.6% and 76.6% respectively in MBBR filled with surface-modified carriers, which ensured the effluent met the first grade A of the Discharge Standard of China. On the contrary, COD, NH₄⁺-N and TN removal efficiencies were 89.7%, 82.3% and 60.4% respectively in the control reactors filled with conventional polyethylene carriers. The worse performance of the control reactor was mainly attributed to the less biomass and lower functional bacteria abundance developed on conventional carriers. Moreover, novel carriers provided a favourable niche for more types of functional bacteria, of which autotrophic nitrification, anoxic denitrification, heterotrophic nitrification and aerobic denitrification co-existed and participated in nitrogen removal.

Enhancement of mariculture wastewater treatment using moving bed biofilm reactors filled with modified biocarriers: Characterisation, process performance and microbial community evaluation

This research investigated two proposed modified biofilm carriers' performances in treating recirculating aquaculture systems (RAS) wastewater under different salinities (12‰, 26‰, and 35‰) for about 92 days. Three moving bed biofilm reactors (MBBRs; R1, R2, and R3) were filled with unmodified novel sponge biocarriers (SB) served as a control, modified novel SB with ferrous oxalate (C₂FeO₄@SB), and modified novel SB with combined ferrous oxalate and activated carbon (C₂FeO₄-AC@SB), respectively. Under the highest saline condition, a significantly higher ammonia removal efficiency of 98.86 ± 0.7% (p ˃ 0.05) was obtained in R3, whereas R2 and R1 yielded 95.18 ± 2.8% and 91.66 ± 1.5%, respectively. Microbial analysis showed that Vibrio, Ruegeria, Formosa, Thalassospira, and Denitromonas were predominant genera, strictly halophilic heterotrophic nitrifying bacteria involved in nitrogen removal. In conclusion, the synergistic effects of novel sponge, C₂FeO₄ and AC accelerated biofilm formations and stability, subsequently enhanced the removal of ammonia from the mariculture RAS wastewater by the C₂FeO₄-AC@SB carriers in R3.

Application of nanofiber carriers for sampling of microbial biomass from contaminated groundwater

Sampling of microbial biomass is crucial for understanding and controlling remediation processes ongoing at contaminated sites in general, particularly when molecular genetic analyses are employed. In this study, fiber-based carriers with a nanofiber layer were developed and tested as a method to sample microbial biomass in groundwater for molecular genetic analysis. Nanofiber carriers, varying in the shape and the linear density of nanofibers, were examined throughout a 27-month monitoring period in groundwater contaminated with benzene, toluene, ethylbenzene and xylene isomers (BTEX), and chlorinated ethenes. The effect of carrier shape and nanofiber layer density on the microbial surface colonization and composition of the microbial biofilm was determined using real-time PCR and next-generation sequencing (NGS) analysis. Differences in microbial community composition between nanofiber carriers, groundwater, and soil samples were also analyzed to assess the applicability of carriers for biomass sampling at contaminated sites. The nanofiber carriers showed their applicability as a sampling tool, particularly because of their easy manipulation that facilitates DNA isolation. The majority of taxa (Proteobacteria, Firmicutes, and Bacteroidetes) present on the carrier surfaces were also detected in the groundwater. Moreover, the microbial community on all nanofiber carriers reflected the changes in the chemical composition of groundwater. Although the carrier characteristics (shape, nanofiber layer) did not substantially influence the microbial community on the carrier surface, the circular and planar carriers with a nanofiber layer displayed faster microbial surface colonization. However, the circular carrier was the most suitable for biomass sampling in groundwater because of its high contact area and because it does not require pre-treatment prior to DNA extraction.

Anaerobically fermented spent mushroom substrates improve nitrogen removal and lead (II) adsorption

In this study, spent mushroom substrates (SMSs) were fermented anaerobically at room temperature to gain liquid SMSs (LSMSs) that were used to remove nitrogen from the piggery wastewater with a low C/N ratio in a sequencing batch reactor (SBR) and solid SMSs (SSMSs) that were utilized to adsorb Pb²⁺ from Pb²⁺-containing wastewater in a fixed-bed reactor (FBR). After LSMSs supplement, the removal efficiency of both total nitrogen (TN) and NH⁺₄-N increased from around 50% to 60-80%. High-throughput sequencing results presented an obvious change in microbial diversity, and some functional microorganisms like Zoogloea and Hydrogenophaga predominated to promote nitrogen removal. Pb²⁺ did not emerge from the effluent until 240 min with the corresponding concentration being less than 3 mg/L when using 30-day SSMSs as adsorbents, and it was demonstrated to be appropriate to use the Thomas model to predict Pb²⁺ sorption on SSMSs. Although various functional groups played a role in binding ions, the carboxyl group was proved to contribute most to Pb²⁺ adsorption. These results certified that the anaerobically fermented SMSs are decidedly suitable for wastewater treatment.

Biological fixed-film systems

The technical papers published in 2019 regarding wastewater treatment and microbial films were classified into two categories: biofilm and biofilm reactors. The biofilm category includes biofilm formation, biofilm consortia, bacterial signals, biofouling, extracellular polymeric substances, and biofilm membrane bioreactors. The biofilm reactors category provides recent information on rotating biological contactors, fluidized-bed biofilm reactors, integrated fixed-film activated sludge, moving-bed biofilm reactors, packed-bed biofilm reactors, sequencing biofilm batch reactors, and trickling filters.

Enhancement of nitrogen removal in hybrid wastewater treatment system using ferric citrate modified basalt fiber biocarrier

Developing biofilm carriers is of great significance for efficient wastewater treatment. In this work, ferric citrate was used to modify inorganic basalt fiber (BF) biocarrier, thus improving its surface properties and the nitrogen removal in hybrid wastewater treatment system. The results showed that the iron element on modified basalt fiber (Fe-MBF) existed in the forms of ferric citrate, Fe(OH)3, Fe2O3, and FeO. The ferric deposition increased the surface roughness, hydrophilicity and reduced the electronegativity of BF. The water contact angle of BF and Fe-MBF was 117.46° and 64.85°, respectively. The surface zeta potential of BF was -17.64 mV, but shifted positively (-8.67 mV) after deposition modification. The microorganism adhesion tests showed that the attached biomass and extracellular polymeric substances (EPS) content on Fe-MBF biocarrier significantly increased and the attached bacteria had also high viability. The Fe-MBF biocarrier showed good nitrogen removal performance in the hybrid bioreactor, with total nitrogen removal efficiency up to 95.35±0.82%, increasing by about 16% compared to that with unmodified BF biocarrier. This work also provided a green modification strategy to enhance biofilm carrier in wastewater treatment.

A value-added step towards promoting the serviceability of fluidized bed bioreactor in treating wastewater with low carbon to nitrogen ratio

Reusing microplastics and zeolite waste as free ammonia (FA)-mitigating carrier particle was proven a value-added step towards promoting the serviceability of fluidized bed bioreactor (FBBR) in treating wastewater with a low carbon to nitrogen ratio (i.e. C/N <3.0) in this study. Ammonia (NH₄⁺) adsorption property capacitates zeolite as an FA mitigator. The microplastics and reused zeolite were processed into reused-zeolite/microplastic composite particle (RZ), whose merit of FA mitigation was fully developed via an optimally thermal modification to process modified-zeolite/microplastic particle (MZ). The 171-day biological nutrient removal (BNR) performance in a single integrated fluidized bed bioreactor (SIFBBR) shows that the bioreactor with MZ particle (SIFBBR-MZ) achieved nitrogen removal efficiency 10.0% higher than the bioreactor with RZ particle (SIFBBR-RZ) over the enhanced short-cut nitrification and denitrification. Analysis of microbial community structure unveils that the long-term lower FA inhibition favored more significant ammonia-oxidizing bacteria (AOB) enrichment and acclimated specific MZ biofilm predominant by nitrite (NO₂^-) denitrifier, contributing to the outperformance in nitrogen removal. Apart from fluidization energy conservation, the techno-economic analysis confirms that using MZ as an FA-mitigating carrier could be of great benefit for FBBR system: realizing waste utilization, reducing carbon addition and alleviating sludge treatment.

Effects of surface skewness on local shear stresses, biofilm activity, and microbial communities for wastewater treatment

This study's objective was to assess attachment surface skewness (asymmetric surface height variation) effects on biofilm development. 3D printed molds were used to create surfaces with 300 μm features to provide opposite skewness but identical roughness values. Surfaces with negative skewness had consistently greater nitrite oxidation and biomass growth than other surfaces during biofilm development when studied in annular bioreactor systems. CFD modelling predicted local shear stress differences that could explain experimental results. 16 s rRNA gene amplicon sequencing revealed population differences, including relatively high Acinetobacter and Terrimonas fractions on the negative skew surfaces, and PCoA analyses indicated the flat surface populations diverged from the skew surfaces by the study's end. The results suggest skewness is particularly important in systems where biofilms have not overgrown surface features, as in system startup, thin biofilms, and shorter time frame studies, which includes much previous microbial attachment research.

Enhanced nitrogen removal by simultaneous nitrification-denitrification and further denitrification (SND-DN) in a moving bed and constructed wetland (MBCW) integrated bioreactor

With the main objective of improving the removal of nitrogen from domestic wastewater and more sustainably, a moving bed and constructed wetland (MBCW) integrated bioreactor was fabricated and evaluated with continuous and intermittent aeration operations. The hybrid system achieves average removal efficiencies up to 90.4 ± 0.8% of chemical oxygen demand (COD), 91.8 ± 1.2% of ammonia nitrogen (NH₄⁺-N), and 77.0 ± 2.6% of total nitrogen (TN), respectively, through a simultaneous nitrification-denitrification and further denitrification (SND-DN) process. This occurs through an intermittent aeration operation followed by continuous aeration with a dissolved oxygen (DO) of 4.0 mg L^-1 due to the complementary and coordinated action of mixed biocarriers. It has resulted in the improvement of the efficiency of SND from 5.9 to 35.3% and in the removal via wetland for DN, between 2.42 and 2.45 g m^-2·d^-1, respectively. The analysis of extracellular polymeric substances (EPS) and high-throughput sequencing demonstrated the enhanced SND mechanism and the evolution of microbial species within the biofilm structure. The total relative abundance of nitrifying bacteria, more aggregated outside the biofilm, decreased by 7.66% compared to denitrifying bacteria, mostly accumulated inside, which increased by 5.49%, respectively.