Ball-milled biochar for galaxolide removal: Sorption performance and governing mechanisms

Recent advancement of nano-biochar for the remediation of heavy metals and emerging contaminants: Mechanism, adsorption kinetic model, plant growth and development

Even though researches have shown that biochar can improve soil-health and plant-growth even in harsh environments and get rid of harmful heavy metals and new contaminants, it is still not sustainable, affordable, or effective enough. Therefore, scientists are required to develop nanomaterials in order to preserve numerous aquatic and terrestrial species. The carbonaceous chemical known as nano-biochar (N-BC) can be used to get rid of metal contamination and emerging contaminants. However, techniques to reduce hetero-aggregation and agglomeration of nano-biochar are needed that lead to the emergence of emerging nano-biochar (EN-BC) in order to maximise its capacity for adsorption of nano-biochar. To address concerns in regards to the expanding human population and sustain a healthy community, it is imperative to address the problems associated with toxic heavy metals, emerging contaminants, and other abiotic stressors that are threatening agricultural development. Nano-biochar can provide an effective solution for removal of emerging contaminants, toxic heavy metals, and non-degradable substance. This review provides the detailed functional mechanistic and kinetics of nano-biochar, its effectiveness in promoting plant growth, and soil health under abiotic stress. Nonetheless, this review paper has comprehensively illustrated various adsorption study models that will be employed in future research.

Unleashing the promise of emerging nanomaterials as a sustainable platform to mitigate antimicrobial resistance

The emergence and spread of antibiotic-resistant (AR) bacterial strains and biofilm-associated diseases have heightened concerns about exploring alternative bactericidal methods. The WHO estimates that at least 700 000 deaths yearly are attributable to antimicrobial resistance, and that number could increase to 10 million annual deaths by 2050 if appropriate measures are not taken. Therefore, the increasing threat of AR bacteria and biofilm-related infections has created an urgent demand for scientific research to identify novel antimicrobial therapies. Nanomaterials (NMs) have emerged as a promising alternative due to their unique physicochemical properties, and ongoing research holds great promise for developing effective NMs-based treatments for bacterial and viral infections. This review aims to provide an in-depth analysis of NMs based mechanisms combat bacterial infections, particularly those caused by acquired antibiotic resistance. Furthermore, this review examines NMs design features and attributes that can be optimized to enhance their efficacy as antimicrobial agents. In addition, plant-based NMs have emerged as promising alternatives to traditional antibiotics for treating multidrug-resistant bacterial infections due to their reduced toxicity compared to other NMs. The potential of plant mediated NMs for preventing AR is also discussed. Overall, this review emphasizes the importance of understanding the properties and mechanisms of NMs for the development of effective strategies against antibiotic-resistant bacteria.

Synthetic musks in the natural environment: Sources, occurrence, concentration, and fate-A review of recent developments (2010-2023)

Synthetic musks (SMs) have served as cost-effective substitutes for natural musk compounds in personal care and daily chemical products for decades. Their widespread use has led to their detection in various environmental matrices, raising concerns about potential risks. Despite numerous studies on SM levels in different natural environments, a systematic review of their contemporary presence is lacking. This review aims to address this gap by summarising recent research developments on SMs in diverse natural environments, including river water, lake water, seawater, estuarine water, groundwater, snow, meltwater, sediments, aquatic suspended matter, soils, sands, outdoor air, and atmospheric particulate matter. Covering the period from 2010 to 2023, the review focuses on four SM categories: nitro, polycyclic, macrocyclic, and alicyclic. It systematically examines their sources, occurrences, concentrations, spatial and temporal variations, and fate. The literature reveals widespread detection of SMs in the natural environment (freshwater and sediments in particular), with polycyclic musks being the most studied group. Both direct (e.g., wastewater discharges) and indirect (e.g., human recreational activities) sources contribute to SM presence. Levels of SMs vary greatly among studies with higher levels observed in certain regions, such as sediments in Southeast Asia. Spatial and temporal variations are also evident. The fate of SMs in the environment depends on their physicochemical properties and environmental processes, including bioaccumulation, biodegradation, photodegradation, adsorption, phase exchange, hydro-dilution effects. Biodegradation and photodegradation can decrease SM levels, but may produce more persistent and eco-toxic products. Modelling approaches have been employed to analyse SM fate, especially for indirect processes like photodegradation or long-distance atmospheric transport. Future studies should further investigate the complex fate if SMs and their environmental influence. This review enhances understanding of SM status in the natural environment and supports efforts to control environmental contamination.

Definitive Review of Nanobiochar

Nanobiochar is an advanced nanosized biochar with enhanced properties and wide applicability for a variety of modern-day applications. Nanobiochar can be developed easily from bulk biochar through top-down approaches including ball-milling, centrifugation, sonication, and hydrothermal synthesis. Nanobiochar can also be modified or engineered to obtain "engineered nanobiochar" or biochar nanocomposites with enhanced properties and applications. Nanobiochar provides many fold enhancements in surface area (0.4-97-times), pore size (0.1-5.3-times), total pore volume (0.5-48.5-times), and surface functionalities over bulk biochars. These enhancements have given increased contaminant sorption in both aqueous and soil media. Further, nanobiochar has also shown catalytic properties and applications in sensors, additive/fillers, targeted drug delivery, enzyme immobilization, polymer production, etc. The advantages and disadvantages of nanobiochar over bulk biochar are summarized herein, in detail. The processes and mechanisms involved in nanobiochar synthesis and contaminants sorption over nanobiochar are summarized. Finally, future directions and recommendations are suggested.

Nanomaterials and biochar mediated remediation of emerging contaminants

The unrestricted release of various toxic substances into the environment is a critical global issue, gaining increased attention in modern society. Many of these substances are pristine to various environmental compartments known as contaminants/emerging contaminants (ECs). Nanoparticles and emerging sorbents enhanced remediation is a compelling methodology exhibiting great potential in addressing EC-related issues and facilitating their elimination from the environment, particularly those compounds that demonstrate eco-toxicity and pose considerable challenges in terms of removal. It provides a novel technique enabling the secure and sustainable removal of various ECs, including persistent organic compounds, microplastics, phthalate, etc. This extensive review presents a critical perspective on the current advancements and potential outcomes of nano-enhanced remediation techniques such as photocatalysis, nano-sensing, nano-enhanced sorbents, bio/phyto-remediation, which are applied to clean-up the natural environment. In addition, when dealing with residual contaminants, special attention is paid to both health and environmental implications; therefore, an evaluation of the long-term sustainability of nano-enhanced remediation methods has been considered. The integrated mechanical approaches were thoroughly discussed and presented in graphical forms. Thus, the critical evaluation of the integrated use of most emerging remediation technologies will open a new dimension in environmental safety and clean-up program.

Nano-biochar as a potential amendment for metal(loid) remediation: Implications for soil quality improvement and stress alleviation

Metal(loid) contamination of agricultural soils has become an alarming issue due to its detrimental impacts on soil health and global agricultural production. Therefore, environmentally sustainable and cost-effective solutions are urgently required for soil remediation. Biochar, particularly nano-biochar, exhibits superior and high-performance capabilities in the remediation of metal(loid)-contaminated soil, owing to its unique structure and large surface area. Current researches on nano-biochar mainly focus on safety design and property improvement, with limited information available regarding the impact of nano-biochar on soil ecosystems and crop defense mechanisms in metal(loid)-contaminated soils. In this review, we systematically summarized recent progress in the application of nano-biochar for remediation of metal(loid)-contaminated soil, with a focus on possible factors influencing metal(loid) uptake and translocation in soil-crop systems. Additionally, we conducted the potential/related mechanisms by which nano-biochar can mitigate the toxic impacts of metal(loid) on crop production and security. Furthermore, the application of nano-biochar in field trials and existing challenges were also outlined. Future studies should integrate agricultural sustainability and ecosystem health targets into biochar design/selection. This review highlighted the potential of nano-biochar as a promising soil amendment for enhancing the remediation of metal(loid)-contaminated agricultural soils, thereby promoting the synthesis and development of highly efficient nano-biochar towards achieving environmental sustainability.

Facile solvent-free modified biochar for removal of mixed steroid hormones and heavy metals: isotherm and kinetic studies

Water contamination has become a global challenge to human survival. Non-biodegradable heavy metal cations and steroid hormones could accumulate in the human body and could result in serious health problems. In this study, we prepared biochar from waste shells of African star apples and modified biochar using a solvent-free ball milling facile method. The X-ray photoelectron spectrometer (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis revealed biochar functional groups in C=C, C-O, and C=O. Brunauer Emmett Teller (BET) was used to determine the surface area, the surface area of ball-milled biochar obtained at 550 °C (BASA550) increased from 174 m2/g to 304 m2/g after modification. The Langmuir and Freundlich adsorption isotherms best described the experimental adsorption data with RL < 1 and 1/n < 1 and a high degree of agreement of R2 data; Langmuir (R2 = 0.9291-0.9992) and Freundlich (R2 = 0.9077-0.9974). The adsorption kinetic studies using pseudo-first-order and pseudo-second-order models revealed that the pseudo-second-order model accurately described the adsorption process). The application of the BASA550 for treating wastewater samples showed a good percentage of removal. The removal percentage for cadmium, nickel, and lead was recorded as 92.96%, 90.89%, and 90.29%, respectively. The percentage removal in the influent and effluent were found to be 85.06%, 83.87%, 84.73%, and 89.37%, 86.48%, and 87.40%, respectively. The maximum percentage removal of steroid hormones from ultrapure water ranged from 84.20 to 89.63%, while from the spiked effluent and influent the percentage removal of 78.91-87.81% and 73.58-84.51% were obtained. The reusability of the ball-milled biochar was investigated and the result showed that the adsorbent (BASA550) had a good reusability potential for the first four cycles.

Nano-biochar: recent progress, challenges, and opportunities for sustainable environmental remediation

Biochar is a carbonaceous by-product of lignocellulosic biomass developed by various thermochemical processes. Biochar can be transformed into "nano-biochar" by size reduction to nano-meters level. Nano-biochar presents remarkable physico-chemical behavior in comparison to macro-biochar including; higher stability, unique nanostructure, higher catalytic ability, larger specific surface area, higher porosity, improved surface functionality, and surface active sites. Nano-biochar efficiently regulates the transport and absorption of vital micro-and macro-nutrients, in addition to toxic contaminants (heavy metals, pesticides, antibiotics). However an extensive understanding of the recent nano-biochar studies is essential for large scale implementations, including development, physico-chemical properties and targeted use. Nano-biochar toxicity on different organisms and its in-direct effect on humans is an important issue of concern and needs to be extensively evaluated for large scale applications. This review provides a detailed insight on nanobiochar research for (1) development methodologies, (2) compositions and properties, (3) characterization methods, (4) potentiality as emerging sorbent, photocatalyst, enzyme carrier for environmental application, and (5) environmental concerns.

Adsorption and desorption of polychlorinated biphenyls on biochar colloids with different pyrolysis temperatures: the effect of solution chemistry

Biochar releases colloidal particles into the environment during applications and aging which can become carriers of pollutants and influence on the environmental risk of pollutants due to the excellent adsorption and migration properties of biochar colloids (BCCs). The adsorption and desorption behaviors of BCCs can be different from their bulk ones due to the colloidal size, which merits specific studies. Herein, the adsorption and desorption of 2,4,4'-trichlorobiphenyl (PCB28) as a representative on BCCs released from bulk biochars prepared from bamboo chips at 300, 500, and 700 C and the effects of solution properties were specifically investigated. Results show that the adsorption was dominated by pore filling and π-π interaction, and thus, BCCs prepared at higher temperature with greater pore volume and aromaticity had higher adsorption of PCB28. Results show that the adsorption was dominated by pore filling and π-π interaction, and thus, BCCs prepared at higher temperature with greater pore volume and aromaticity had higher adsorption of PCB28. The saturation adsorption amounts of PCB28 on BCC300, BCC500, and BCC700 were 21.9, 40.3, and 62.4 mg/g, respectively. It is noteworthy that PCB28 possessed a significant desorption hysteresis from BCCs, with the hysteresis index (Ce = 80 μg/L) increased from 0.380 to 0.661 as the preparation temperature of BCCs rising from 300 to 700 ℃. High concentration of NaCl (100 mmol/L) was unfavorable for the adsorption and desorption. The presence of humic acid or fulvic acid (FA), especially the smaller FA, could inhibit the adsorption and desorption of PCB28 on BCCs due to micropore blocking. In seawater, groundwater, surface water, and soil solution samples, the PCB28 adsorption of BCCs was inhibited to varying degrees in comparison with that in deionized water, and the desorption was noticeably inhibited in the groundwater sample. These findings provide valuable information for the understanding of interactions between BCCs and organic contaminants in natural waters and for the environmental application of biochars as well.

Full profile contamination process simulation and risk prediction of synthetic musk from reclaimed water receiving river to groundwater via vadose zone: A case study of Chaobai River

Long-term infiltration from river receiving reclaimed water will pose potential risk to vadose zone and groundwater because of the persistent and highly toxic contaminants. In order to predict the spatio-temporal distribution of ecological and health risk, a coupled model of HYDRUS-GMS combined risk quotient was proposed. The model can accurately predict water flow, solute transport and risk with model due to the acceptable efficiency (E:0.99), mean absolute error (MAE:0.031 m) and root-mean-square error (RMSE:0.039 m). The content of galaxolide (HHCB), a typical pharmaceutical and personal care product with hydrophobicity and refractory in reclaimed water, increased in vadose zone at an accumulative rate of 6.1 ng g^-1 year^-1 with infiltration time extension. The accumulation will pose ecological risk after 53 years infiltration. The potential risk will extent to groundwater once penetrate through vadose zone, and mainly diffuse along groundwater flow direction. The migration rate along horizontal direction of groundwater flow is 0.03396 m d^-1, which is 9.7 and 1.1 times higher than longitudinal and vertical rates due to the variation of driving force in three directions. The migration rate of HHCB was 2.6% of groundwater flow due to hydrophobicity (LogKow = 5.9). The complete biochemical decomposition of HHCB will take approximately 0.38 year through metabolite within 182.65 m distance. The persistence was attributed to the high chronic toxicity and the low bio-availability. The major biochemical metabolism of HHCB was enzymatic hydrolysis, ring opening, decarboxylation, which was decomposed and carbonized within approximately 0.38 year after 182.65 m migration distance. This study provided a new approach to predict the spatio-temporal risk distribution due to reclaimed water reuse.

Remarkable synergy between sawdust biochar and attapulgite/diatomite after co-ball milling to adsorb methylene blue

Biochar has been recognized as a promising sustainable adsorbent for removing pollutants from wastewater. In this study, two natural minerals, attapulgite (ATP) and diatomite (DE) were co-ball milled with sawdust biochar (pyrolyzed at 600 °C for 2 h) at ratios of 10-40% (w/w) and examined the ability of methylene blue (MB) to be removed from aqueous solutions by them. All the mineral-biochar composites sorbed more MB than both ball milled biochar (MBC) and ball milled mineral alone, indicating there was a positive synergy in co-ball milling biochar with these minerals. The 10% (w/w) composites of ATP:BC (MABC10%) and DE:BC (MDBC10%) had the greatest MB maximum adsorption capacities (modeled by Langmuir isotherm modeling) and were 2.7 and 2.3 times that of MBC, respectively. The adsorption capacities of MABC10% and MDBA10% were 183.0 mg g^-1 and 155.0 mg g^-1 at adsorption equilibrium, respectively. These improvements can be owing to the greater content of oxygen-containing functional groups and higher cation exchange capacity of the MABC10% and MDBC10% composites. In addition, the characterization results also reveal that pore filling, π-π stacking interactions, hydrogen bonding of hydrophilic functional groups, and electrostatic adsorption of oxygen-containing functional groups also contribute prominently to the adsorption of MB. This, along with the greater MB adsorption at higher pH and ionic strengths, suggests the roles in MB adsorption was an electrostatic interaction and an ion exchange mechanism. These results demonstrate that mineral-biochar composites prepared by co-ball milling treatment were promising sorbents of ionic contaminants for environmental applications.

Customized oxygen-rich biochar with ultrahigh microporosity for ideal solid phase microextraction of substituted benzenes

The synergistic effect of high microporosity and abundant heteroatoms is important for improving the performance of biochar in various fields. However, it is still challenging to create enough micropores for biochar, while simultaneously retaining the heteroatoms from biomass. A series of biochar with variable microstructures was successfully prepared by carbonization and following ball milling on lotus pedicel (LP), watermelon rind (WR), and litchi rind (LR). The pore structures and heteroatoms of biochar were characterized in detail. Notably, high microporosity could be realized by the carbonization of LR, and further ball milling resulted in a higher microporous surface area (1323.4 m²·g^-1) and richer oxygen. Furthermore, the obtained biochar was fabricated as solid phase microextraction (SPME) coatings with uniform morphologies and similar thicknesses to deeply investigate the relationships between the microstructures and extraction performance. The best performance was demonstrated by the LR800BM, with enrichment factors from 1780 to 155,217. Finally, it was coupled with gas chromatography-mass spectrometry (GC-MS) to develop an analytical method with a wide linear range (1-50,000 ng·L^-1), low limits of detection (0.10-1.4 ng·L^-1), good repeatability (0.83 %-7.5 %) and reproducibility (4.2 %-8.9 %). This work provides valuable insights into the structure-performance relationship of biochar, which is important for the design of high-performance biochar-based adsorbents and their applications in the environment.

Effects of ball milling on biochar adsorption of contaminants in water: A meta-analysis

Reckless release of contaminants into the environment causes pollution in various aquatic systems on a global scale. Biochar is potentially an inexpensive and environmentally friendly adsorbent for removing contaminants from water. Ball milling has been used to enhance biochar's functionality; however, global analysis of the effect of ball milling on biochar's capacity to adsorb contaminants in aqueous solutions has not yet been done. Here, we conducted a meta-analysis to investigate the effects of ball milling on the adsorption/removal capacity of biochar for contaminants in aqueous solutions, and to investigate whether ball milling effects are related to biochar production, ball milling, and other experimental variables. Overall, ball milling significantly increased biochar adsorption capacity towards both inorganic and organic contaminants, by 69.9% and 561.9%, respectively. This could be attributed to ball milling increasing biochar surface area by 2.05-fold, pore volume by 2.39-fold, and decreasing biochar pH by 0.83-fold. The positive adsorption effects induced by ball milling varied widely, with the most effective being ball milling for 12 to 24 h at 300 to 400 rpm with a biochar:ball mass ratio of 1:100 on biochars produced at 400-550 °C from wood residues. Based on this meta-analysis, we conclude that ball milling could effectively enhance biochar's ability to remove organic and inorganic contaminants from aquatic systems.

H2O2 activated moxa ash via ball milling for ultrafast removal of mitoxantrone

As emerging contaminants, antineoplastic drugs are widely used, but their residues in water may cause long-term genotoxicity to aquatic organisms and human beings. Here, waste moxa ash was selected as biomass raw material and modified by ball milling to obtain carbon-based materials with excellent adsorption performance, which were used to remove the antineoplastic drug mitoxantrone (MTX) from water. The experimental results indicate that moxa ash modified by ball milling in hydrogen peroxide exhibits ultrafast removal of MTX (the removal efficiency reaches 97.66% in 1 min and 99.72% in 30 min). The pseudo-second-order kinetics and Freundlich isotherm models accurately describe the MTX adsorption process, and the mechanism of adsorption probably involves pore filling, hydrogen bond, π-π interaction and electrostatic attraction. Not only that, moxa ash also has the ability to remove dyes such as malachite green (97.81%) and methylene blue (99.97%). In this study, a simple and environmentally friendly process was used to convert waste moxa ash into an effective MTX adsorbent, providing a feasible solution for controlling MTX pollution and identifying a circular and economic way to reuse the waste.

Ball milling enhanced Cr(VI) removal of zero-valent iron biochar composites: Functional groups response and dominant reduction species

Zero-valent iron biochar composites (ZVI/BC) have been widely used to remove Cr(VI) from water. However, the application of ZVI/BC prepared by the carbothermal reduction was limited by the non-uniform dispersion of ZVI on the biochar surface. In this work, ball milling technique was introduced to modify ZVI/BC. Results showed that after ball milling, the maximum Langmuir adsorption capacity for Cr(VI) was 117.7 mg g-1 (298 K) which was 2.08 times higher than ZVI/BC. The initial adsorption rate of the Elovich model increased from 4.57 × 102 mg g-1 min-1 to 3.74 × 109 mg g-1 min-1 after ball milling. Dispersibility of ZVI on biochar surface and contact between ZVI and biochar were improved by the ball milling, thus accelerating the electron transfer. Besides, ball milling increased the content of oxygen-containing functional groups in biochar, contributing to the chemisorption of Cr(VI). The response sequence of oxygen-containing functional groups was analyzed by two-dimensional correlation spectroscopy, indicating that Cr(VI) preferentially complexed with phenolic -OH. Shielding experiments showed that Fe (0) was the dominant reducing species with a contribution of 73.4%, followed by surface-bound Fe(II) (21.3%) and dissolved Fe2+ (5.24%). Density functional theory calculations demonstrated that ball milled ZVI/BC improved the adsorption affinity and electron transfer flux towards Cr(VI) by introducing phenolic -OH and Fe (0). Combining all the textural characterization, the Cr(VI) removal mechanism of the ball milled ZVI/BC could be proposed as adsorption, reduction, and precipitation. Eventually, stable Cr-Fe oxides (FeOCr2O3 and Cr1·3Fe0·7O3) were formed. This work not only provides a simple method to modify ZVI/BC to remove Cr(VI) in water efficiently and rapidly, but also improves the mechanistic insight into the Cr(VI) removal by iron-carbon composites via the response sequence of functional group analysis and the quantitative analysis of reducing species.

Coassisted carbonization with HCOOK/(HCOO)2Ca for the fabrication of bamboo-derived oxygen-doped porous carbons exhibiting high-performance sorption of diethyl phthalate from aqueous solutions

Porous carbons are excellent sorbents for removing organic pollutants. Green conversion of biowaste into advanced porous carbons is crucial for industrialized production and practical applications, which, however, have rarely been investigated. This study develops a coassisted carbonization method for the preparation of porous carbons with the environmentally friendly agents HCOOK and (HCOO)₂Ca for the first time. The bamboo waste-derived hydrochar was transformed into oxygen-doped porous carbons, which displayed a large surface area and pore volume, abundant oxygen content, graphene structure and many surface functional groups. These properties contributed to the extremely high sorption of large quantities of diethyl phthalate, which reached 761 mg g^-1. Surface adsorption, including pore filling, hydrogen bonding, and π-π stacking, rather than partitioning, was the main sorption process. Therefore, this study provides a sustainable and promising route for the preparation of porous carbons that can be applied in the efficient removal of organic pollutants.

Characteristics and aqueous dye removal ability of novel biosorbents derived from acidic and alkaline one-step ball milling of hickory wood

New classes of biosorbents are needed for various environment remediation applications. Thus, a facile and benign approach to synthesize porous biosorbents was developed using acidic or alkaline one-step ball milling of hickory wood biomass (AcBH and AlBH, respectively) without any external heat treatment, and their properties were compared. AcBH and AlBH were richer in O-containing functional groups, had enhanced porous structure and greater ability to remove crystal violet (CV, 476.4 mg g^-1) and Congo red (CR, 221.8 mg g^-1) dyes from aqueous solution, respectively, relative to hickory wood ball milled at neutral pH. Freundlich isotherm and pseudo second order kinetic models best fitted CR and CV adsorption onto biosorbents, indicating a mainly surface complexation adsorption mechanism. Further, both sorbents exhibited excellent stability and dye adsorption reusability. These results demonstrate that acidic and alkaline one-step ball milling is a facile and efficient approach for converting wood biomass into environmentally friendly biosorbents.

Surface Modification of Biochar for Dye Removal from Wastewater

Nowadays, biochar is being studied to a great degree because of its potential for carbon sequestration, soil improvement, climate change mitigation, catalysis, wastewater treatment, energy storage, and waste management. The present review emphasizes on the utilization of biochar and biochar-based nanocomposites to play a key role in decontaminating dyes from wastewater. Numerous trials are underway to synthesize functionalized, surface engineered biochar-based nanocomposites that can sufficiently remove dye-contaminated wastewater. The removal of dyes from wastewater via natural and modified biochar follows numerous mechanisms such as precipitation, surface complexation, ion exchange, cation–π interactions, and electrostatic attraction. Further, biochar production and modification promote good adsorption capacity for dye removal owing to the properties tailored from the production stage and linked with specific adsorption mechanisms such as hydrophobic and electrostatic interactions. Meanwhile, a framework for artificial neural networking and machine learning to model the dye removal efficiency of biochar from wastewater is proposed even though such studies are still in their infancy stage. The present review article recommends that smart technologies for modelling and forecasting the potential of such modification of biochar should be included for their proper applications.

Pyrolyzed biomass-derived nanoparticles: a review of surface chemistry, contaminant mobility, and future research avenues to fill the gaps

Nanoparticles are abundant in the subsurface, soil, streams, and water bodies, and are often a critical control on elemental speciation, transport and cycling in the natural environment. This review provides an overview of pyrolyzed biomass-derived nanoparticles (PBNPs), their surface properties and reactivity towards aqueous species. We focus specifically on biochar-derived nanoparticles and activated carbon-derived nanoparticles which fall under our classification of PBNPs. Activated carbon-iron (nano)composites are included in some instances where there are significant gaps in literature because of their environmental relevance. Increased use of activated carbon, along with a resurgence in the manufacture and application of biochar for water treatment and soil amendment, has generated significant concerns about the mobility and toxicity of PBNPs derived from the bulk material in environmental applications. Recent examples are discussed to highlight current progress in understanding the influence of PBNPs on contaminant transport, followed by a critical discussion of gaps and future research directions.

Removal of fluconazole from aqueous solution by magnetic biochar treated by ball milling: adsorption performance and mechanism

The problem of low adsorption capacity of pristine magnetic biochar for organic pollutants always occurs. It is of great significance to select a suitable method to improve the adsorption performance of magnetic biochar. In this study, magnetic biochar was treated by ball milling and tested for its fluconazole adsorption capacity. The maximum adsorption capacity of ball-milled magnetic biochar (BMBC) for fluconazole reached nearly 15.90 mg/g, which was approximately five times higher than that of pristine magnetic biochar (MBC). Fluconazole adsorption by BMBC was mainly attributed to π-π interactions, hydrogen bonding, and surface complexation with oxygen-containing functional groups. The enhancement in fluconazole adsorption by BMBC was attributed to an increase in oxygen-containing functional groups. Batch adsorption experiments also illustrated that BMBC could be successfully applied in a wide range of pH values. The high efficiency of fluconazole removal confirmed that ball milling was an effective strategy to enhance the adsorptive performance of magnetic biochar.

Systematic Research on the Transport of Ball-Milled Biochar in Saturated Porous Media: Effect of Humic Acid, Ionic Strength, and Cation Types

Ball-milled biochar (BMBC) is a typical engineering material that has promising application prospects in remediating contaminated soil and water. It is fundamental to rate the transport behaviors of BMBC in the underground environment before extensive use. In this study, the effects of the ubiquitous cations (Na⁺, Mg²⁺, and Al³⁺) and model organic matter (humic acid) on the transport of BMBC were investigated using laboratory column experiments. The results demonstrated the facilitated effect of HA on the transport of BMBC due to the negatively charged surface and steric effect under neutral conditions. HA and ionic strength manifested an antagonistic effect on the transport of BMBC, where the presence of one could weaken the effect from the other. We also found the charge reversal of the BMBC surface in the presence of Mg²⁺, thus enhancing the deposition of BMBC onto the medium surface. On the other hand, the charge reversal from Al³⁺-coupled acid conditions led to the restabilization and transport of BMBC in porous media. Therefore, the rational usage of BMBC is indispensable and more attention should be paid to the composition and change in underground water that might facilitate the transport of BMBC and thus lead to negative environmental implications.

Biochar from waste agriculture as reinforcement filer for styrene/butadiene rubber

Carbon black (CB), obtained by incomplete combustion of heavy petroleum products, is the most important filler used to improve the properties of various rubber composites. Its production process causes very serious environmental impacts in addition to its dependence on nonrenewable resources. Therefore, the trend has been to use eco‐friendly alternative materials that reduce the pollution associated with the CB production process and at the same time achieve the required mechanical properties of rubber composites. Biochar, a carbon‐rich solid product, could fulfill this role. It can be obtained by pyrolysis of organic matter such as agricultural waste in the absence of air at temperatures of 400–600°C. Herein, biochar was used in different ratios with CB to investigate its effect on the mechanical properties of styrene/butadiene rubber. The chemical composition of biochar and CB was investigated using a scanning electron microscopy and X‐ray fluorescence. In addition, the thermal properties, tensile strength, elongation at break, as well as thermo‐oxidative aging of the prepared rubber were studied. The tensile strength for styrene/butadiene rubber (SBR) composites containing 100% CB was 14.9 MPa, which decreases by adding biochar where it becomes 13.5, 11.2, 9.5, and 6.9 for SBR composites containing 25%, 50%, 75%, and 100% biochar, respectively. Furthermore, the vulcanized sample with 25% biochar (E2) shows higher retained tensile strength values than that containing 100% CB (E1) with increasing the aging time.

Insight into the mechanisms of ball-milled biochar addition on soil tetracycline degradation enhancement: Physicochemical properties and microbial community structure

A set of soil under the addition of ball-milled biochar (BM-biochar) from different feedstocks (wheat straw (WS) and rice husk (RH)) and pyrolysis temperature (300 °C, 500 °C, and 700 °C) was established to analyze the tetracycline (TC) degradation performance enhancement and greenhouse gas carbon dioxide (CO₂), and nitrous oxide (N₂O) emission reduction from various angles, including physicochemical properties of soil and microbial community structure. After 45 days' incubation, the pH value decreased slightly from 7.34 to 7.22 for WS biochar-treated soil, while slightly increased from 7.34 to 7.50 for RH biochar-treated soil. The lowest KCl-leachable TC concentrations of BMWS700 and RH700 was about 0.0037 mg/L. Ball-milled 500 °C and 700 °C biochars enhanced the removal rate of TC significantly. The maximum reduction of TC was from 2.17 to 0.079 mg/kg, equivalent to 96% removal after ball-milled 500 °C wheat straw biochar (BMWS500) addition, suggesting the promoting effect of biochars on microorganisms for adsorption and degradation of TC. Biochars' addition reduced CO₂ and N₂O emissions, BM-biochar enlarged this effect under the pyrolysis temperature 500 °C for both feedstock types. Ball milled rice husk biochar pyrolyzed under 500 °C (BMRH500) presented the maximum inhibitory effect CO₂ emission. The addition of BM-biochar changed the microbial community and diversity. The relative abundance of bacterium and fungus such as Proteobacteria, Acidobacteria, Chlorofexi, Mortierella, and Chaetomium increased due to BM-biochar addition, which promoted the degradation of TC and gave rise to more healthy soil environment for plant or microbes. The larger specific surface area, π-π interactions, hydrophobic interaction, and hydrogen bonding are account for better adsorption and degradation of TC by BM-biochars. This work elucidated the management of organic contaminants in real soil by BM-biochar.

Preparation of biosorbent for the removal of organic dyes from aqueous solution via one-step alkaline ball milling of hickory wood

Biosorbent has attracted considerable attention recently for use in environment remediation and pollution control. Here, a simple and efficient method of one-step alkaline ball milling was designed to prepare porous hickory biosorbent without any thermal treatments. The products were characterized for their ability to remove methyl violet (MV) and titan yellow (TY) organic dyes from aqueous solutions. The one-step alkaline ball milled hickory (OABMH) biosorbent exhibited mesoporous microstructure, homogeneous morphology, and a diversity of oxygen-containing functional groups. Furthermore, OABMH could sorb 212.2 mg g^-1 MV and 5.6 mg g^-1 TY polar dyes, respectively, mainly through the surface complexation mechanism. Freundlich adsorption isotherm and intraparticle diffusion kinetic models best described MV adsorption by OABMH biosorbents. The results indicate that one-step alkaline ball milling technique is an efficient and economical approach for converting biomass into advanced biosorbents for environment remediation and water treatment.

Remediation of petroleum-contaminated soil by ball milling and reuse as heavy metal adsorbent

A simple mechanochemical (MC) method is used to treat petroleum-contaminated soil and prepare a heavy metal adsorbent in one step. XRD, Raman, FT-IR, VSM, BET, and XPS were used to characterize the adsorbent. After MC treatment, the dissolved total petroleum hydrocarbons of the adsorbent is less than 1 mg·L^-1, and a porous structure and carbonization phenomenon are evident. The specific surface area and cumulative void volume increase, and the adsorption pore size decreases. On the surface of soil, the percentages of iron oxides, carbonates, CO, -C-O-H, -COOH, and π unsaturated bonds increase. The Langmuir model shows that the maximum adsorption capacity of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ are 338.58, 51.61, 32.34, and 25.05 mg·g^-1, respectively. The pseudo-second-order kinetic model fits the Pb adsorption process, indicating the domination of chemical adsorption. GC-MS shows that petroleum hydrocarbons are completely degraded. The Tessier continuous extraction result shows that heavy metals are bound to carbonate, iron manganese oxide, and organic matter. The MC treatment achieves deep cleanup and resource utilization of petroleum-contaminated soil through the formation of amorphous carbon, carbonates, and iron oxides on the surface of soil particles. The material is magnetic and can be recycled when used in wastewater treatment.

Activation of peroxydisulfate by ball-milled α-FeOOH/biochar composite for phenol removal: Component contribution and internal mechanisms

Persulfate-based advanced oxidation process is considered as a promising technology for the degradation of phenol, where efficient, cost effective, and green methods with high peroxydisulfate (PS) activation capacity is of increasing demand. In this work, an in-situ liquid phase precipitation combined with ball milling method was applied for the synthesized of α-FeOOH/biochar, as be the PS activator for phenol degradation. Results showed that the ball-milled α-FeOOH and red pine wood biochar prepared at 700 °C (BM-α-FeOOH/PBC700) exhibited the highest catalytic property with PS for phenol oxidation (a phenol removal rate of 100%), compared with the BM-α-FeOOH (16.0%) and BMPBC700 (66.3%). The presence of intermediate products such as hydroquinone and catechol, and total organic carbon (TOC) removal rate (88.9%) proved the oxidation of phenol in the BM-α-FeOOH/PBC700+PS system. The characterization results showed that the functional groups (e.g., CO, C-O, Fe-O, and Si-O), the dissolved organic matter (DOM) in biochar, the loading of Fe element, and higher degree of graphitization and defect structures, contributed to the activation of PS to form free radicals (i.e., SO₄^·-, ·OH, ·O₂^-, and h_VB⁺) for phenol oxidation, of which, SO₄·^- and ·OH account for 72.1% of the phenol removal rate. The specific contribution to the PS activation for phenol oxidation by each part of the materials was calculated based on the "whole to part" experiment. The contribution of DOM, acid-soluble substance, and carbon matrix and basal part in BM-α-FeOOH/PBC700 were 6.0%, 40.9%, and 53.1%, respectively. The reusability experiments of BM-α-FeOOH/PBC700 demonstrated that the composite was relatively stable after four cycles of reuse. Among three co-existing anions (NO₃^-, Cl^-, and HCO₃^-), HCO₃^- played the most significant inhibition effects on phenol removal through reducing the phenol removal rate from 89.6% to 77.9%. This work provides guidance for the design of high active and stable carbon materials that activate PS to remove phenol.

Combination of modified biochar and polyurea microcapsules to co-encapsulate a fumigant via interface polymerization for controlled release and enhanced bioactivity

BACKGROUND

Soil fumigants-the most effective agrochemicals for managing soil-borne diseases-have been used extensively. However, high volatility, moderate toxicity and insufficient effective duration considerably limit their application. In the present study, interface polymerization was used to combine modified biochar (BC) and polyurea microcapsules (MCs) to co-encapsulate allyl isothiocyanate (AITC), developing a model fumigant for controlled release (AITC@BC-MCs).

RESULTS

The physical characteristics of BC modified by sand-milling were significantly improved. In addition, chemical properties and morphological features of AITC@BC-MCs characterized by integrated methods revealed successful preparation of BC-MCs. Compared with monolayer MCs, BC-MCs could significantly delay AITC release owing to the composite obstruction effect. Moreover, modifying BC endowed the cargo molecules with a pH-responsive release property. Additionally, this composite showed a longer persistent duration by prolonging AITC degradation half-life, which was 3.2-3.5-fold greater than that of the AITC technical concentrate under different soil conditions. Finally, the control efficacy of the AITC@BC-MC against pathogens, including nematodes and fungi, as well as against weeds was significantly enhanced at the same dose, but the composite did not inhibit seed germination and growth after 10 days when fumigated soil was aerated.

CONCLUSION

Construction of a composite encapsulation system enhanced pesticide efficacy, reduced dose via controlled release and delayed fumigant degradation in soil, indicating the great potential of this strategy for developing an effective and environmentally friendly fumigant formulation. © 2021 Society of Chemical Industry.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Tuning oxygenated functional groups on biochar for water pollution control: A critical review

Biochar has attracted increasing attention in water pollution control, attributed to its various merits, e.g., tunable physico-chemical properties. The oxygenated functional groups (OFGs) on biochar are key active sites for removing pollutants from water through interfacial adsorption/redox reaction. However, there is still a lack of comprehensive knowledge and perspective on tuning OFGs on biochar for enhanced performance in water pollution control. Here, this review highlighted the mechanisms of biochar OFGs in water pollution control, analyzed the strategies and mechanisms for tuning OFGs on biochar, and investigated the performances of biochars with tuned OFGs in removing inorganic/organic pollutants via adsorption/redox reactions. Specifically, strategies for tuning OFGs on biochar are far more than the well-recognized ex-situ oxidation of pristine biochar. These strategies include in-situ low temperature preservation of hydroxyl and carboxyl, in-/ex-situ oxidation of biochar, and in-/ex-situ grafting of carboxyl on biochar via cycloaddition/acylation reaction. The resultant biochars showed enhanced performances in adsorption (mainly mediated by hydroxyl, carboxyl and ketone through surface complexation, H-bonding, and electrostatic attraction) and redox reaction (mainly mediated by redox-active hydroxyl and ketone). Finally, this review presented future directions on developing biochar with specially tuned surface OFGs as a sustainable high-performance adsorbent/carbocatalyst for water pollution control.

Responses of soil microbial community to combination pollution of galaxolide and cadmium

The goal of this work was to assess the effect of combined pollution of galaxolide (HHCB) and cadmium (Cd) on soil microbial community as measured by phospholipid fatty acid (PLFA). Combined effects of HHCB and Cd were different from that of HHCB alone. The total microbial biomass increased with the concentrations of HHCB in both the single and combined treatments. Comparing to the single HHCB treatments, addition of Cd significantly reduced both the total microbial biomass and Gram-positive/Gram-negative bacteria (G+/G-) ratio, while increased the bacteria/fungi (B/F) ratio in the combined pollution treatments. The principal component analysis (PCA) revealed that the microbial community structure was significantly altered by the combined effects of HHCB and Cd. Results of redundancy analysis (RDA) showed that there was complex relationship between pollutant and microbial community and the combined effects was higher than the single pollution. Taken together, these results suggest that combined pollution of HHCB and Cd caused a greater influence on the soil microbial community than the single pollution of HHCB.

Non-Solvent Synthesis of a Robust Potassium-Doped PdCu-Pd-Cu@C Nanocatalyst for High Selectively Tandem Reactions

A non-solvent synthesis of alkali metal-doped PdCu-Pd-Cu@C is presented that needs no mechanical grinding and utilizes heat treatment under an N2 gas flow. Pluronic® F127 is used to generate pores and a high surface area, and tannic acid is used as a carbon source for the PdCu-Pd-Cu@C nanocatalysts. Because some C is transferred to organic compounds during the nitrogen heat treatment, this demonstrated the advantage of raising the weight ratio of active metals comparatively. The PdCu-Pd-Cu@C nanocatalyst developed in this study outperformed commercial Pd/C catalysts by bimetallic PdCu-Pd-Cu nanoparticles and Pd nanoparticles in terms of catalytic activity (selectivity of commercial Pd/C: 45%; PdCu-Pd-Cu@C nanocatalyst: 76%). The alkali metal dopants increase the selectivity of the final product on the PdCu-Pd-Cu@C surface because they are electron-rich, which assists in the adsorption of the substrate (selectivity of PdCu-Pd-Cu@C nanocatalyst: 76%; K-doped PdCu-Pd-Cu@C nanocatalysts: 90%). Furthermore, even after being reused 5 times in this research, the final catalytic performance was comparable to that of the initial catalyst.

Microalgae as Contributors to Produce Biopolymers

Biopolymers are very favorable materials produced by living organisms, with interesting properties such as biodegradability, renewability, and biocompatibility. Biopolymers have been recently considered to compete with fossil-based polymeric materials, which rase several environmental concerns. Biobased plastics are receiving growing interest for many applications including electronics, medical devices, food packaging, and energy. Biopolymers can be produced from biological sources such as plants, animals, agricultural wastes, and microbes. Studies suggest that microalgae and cyanobacteria are two of the promising sources of polyhydroxyalkanoates (PHAs), cellulose, carbohydrates (particularly starch), and proteins, as the major components of microalgae (and of certain cyanobacteria) for producing bioplastics. This review aims to summarize the potential of microalgal PHAs, polysaccharides, and proteins for bioplastic production. The findings of this review give insight into current knowledge and future direction in microalgal-based bioplastic production considering a circular economy approach. The current review is divided into three main topics, namely (i) the analysis of the main types and properties of bioplastic monomers, blends, and composites; (ii) the cultivation process to optimize the microalgae growth and accumulation of important biobased compounds to produce bioplastics; and (iii) a critical analysis of the future perspectives on the field.

Superhydrophobic-superoleophilic biochar-based foam for high-efficiency and repeatable oil-water separation

Leakage accidents occurring during oil production and transportation are currently one of the most serious environmental problems worldwide. Developing efficient and environmentally friendly oil-water separation methods is the key to solve this problem. In this work, a facile method to fabricate a high-performance oil absorbent through the loading of ball-milled biochar (BMBC) and octadecylamine on the skeleton of melamine foam (MF) is reported. The resulting ball-milled biochar-based MF (BMBC@MF) displayed a complex three-dimensional porous structure. The BM biochar on the surface of BMBC@MF forms nano/μm-scale folds, which reduced the surface energy of BMBC@MF after grafted octadecylamine. These structures resulted in the conversion of the hydrophilic surface of MF to hydrophobic surface. These characteristics made the modified foam an excellent oil absorbent with a high oil absorption capacity (43-155 times its own weight) and extraordinary recyclability. Furthermore, the BMBC@MF could maintain high hydrophobicity and adsorption stability in a wide pH range (from 1 to 11). More importantly, BM biochar is a cheap and readily available material to make BMBC@MF possible for large-scale production. Therefore, this work provides an effective way for low-cost, environmentally friendly, and large-scale production of superhydrophobic adsorbents for oil-water separation.

Graphitic carbon nitride/biochar composite synthesized by a facile ball-milling method for the adsorption and photocatalytic degradation of enrofloxacin

In order to enhance the removal performance of graphitic carbon nitride (g-C₃N₄) on organic pollutant, a simultaneous process of adsorption and photocatalysis was achieved via the compounding of biochar and g-C₃N₄. In this study, g-C₃N₄ was obtained by a condensation reaction of melamine at 550°C. Then the g-C₃N₄/biochar composites were synthesized by ball milling biochar and g-C₃N₄ together, which was considered as a simple, economical, and green strategy. The characterization of resulting g-C₃N₄/biochar suggested that biochar and g-C₃N₄ achieved effective linkage. The adsorption and photocatalytic performance of the composites were evaluated with enrofloxacin (EFA) as a model pollutant. The result showed that all the g-C₃N₄/biochar composites displayed higher adsorption and photocatalytic performance to EFA than that of pure g-C₃N₄. The 50% g-C₃N₄/biochar performed best and removed 45.2% and 81.1% of EFA (10 mg/L) under darkness and light with a dosage of 1 mg/mL, while g-C₃N₄ were 19.0% and 27.3%, respectively. Besides, 50% g-C₃N₄/biochar showed the highest total organic carbon (TOC) removal efficiency (65.9%). Radical trapping experiments suggested that superoxide radical (•O₂^-) and hole (h⁺) were the main active species in the photocatalytic process. After 4 cycles, the composite still exhibited activity for catalytic removal of EFA.

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

Ball milling biochar with ammonia hydroxide or hydrogen peroxide enhances its adsorption of phenyl volatile organic compounds (VOCs)

Pristine biochar (CN600), ball-milled biochar (CN600-BM), H₂O₂ modified BM-biochar (CN600-O), and NH₄OH modified BM-biochar (CN600-N) derived from corn stalk were applied to adsorb phenyl volatile organic compounds (VOCs). H₂O₂ and NH₄OH modification of BM-biochar significantly improved its physicochemical characteristics and adsorption abilities. The specific surface area of CN600-O increased 2.05 and 1.23 times compared to CN600 and CN600-BM, respectively; while CN600-N increased 2.41 and 1.45 times, respectively. In addition, the ball milled biochars, especially CN600-O, showed higher acidity and polarity than CN600. The VOC adsorption amount onto biochars was 10.96-130.21 mg/g. CN600-O and CN600-N had high uptake of the VOCs and reached 100.07-111.79 mg/g and 110.49-130.21 mg/g, respectively. CN600-N showed the best performance with P-xylene adsorption up to 130.21 mg/g. VOC adsorption onto the CN600-O and CN600-N were mainly governed by surface adsorption and associated with morphology characteristics of the biochars as well as VOC properties such as boiling point and molecular size. Five cycles of adsorption-desorption experiments showed that CN600-O and CN600-N had good reusability with the reuse efficiencies of 88.01 %-92.21 % and 92.19 %-95.39 %, respectively. The results indicate that O- and N-doped ball-milled biochars are promising in adsorption for effective and sustainable VOC removal.

Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials

Mechanochemical synthesis of nano-biochar by ball-milling technology is gaining attention for the sake of its low-cost and eco-friendly nature. Ball milling as a non-/less-solvent technology can propel environmental sustainability and waste valorization into engineered biochar for advanced applications. Scalable production of biochar nanomaterials with superior properties (e.g., 400-500 m² g^-1 surface area and 0.5-1000 nm pore sizes) enables diverse applications in the field of energy and environment. This review critically evaluates the synthesis, characterization, and application of ball-milled biochar nanomaterials based on the latest findings. Limitations such as feedstock selection, process optimization, product homogeneity and reusability, environmental risks, and sustainability assessment remain challenging for further studies. This work highlights the recent advances on mechanochemical biochar technology and offer insights into opportunities and future prospects related to sustainable and facile synthesis of biochar-based novel materials for achieving sustainable development goals.

Adsorption of tetracycline hydrochloride onto ball-milled biochar: Governing factors and mechanisms

Pristine and ball milled wheat stalk biochars pyrolysed at 300 °C, 450 °C, 600 °C were studied for tetracycline hydrochloride (TCH) adsorption from aqueous solution. Surface characteristics of ball milled biochar (BM-biochar) were significantly enhanced over their pristine counterparts. TCH adsorption occurred largely on external surface and by filling pores of biochars as evidenced by strong positive correlation between adsorption and external specific surface area (SSA), total pore volume, or mesoporous volume. A two-stage intra-particle diffusion model, limited by the TCH diffusion through the boundary liquid layer, well described TCH adsorption. Maximum TCH adsorption occurred at about pH = 6-8. While solution cations including Na⁺, K⁺ and Mg²⁺ subdued TCH adsorption as they competed for adsorption sites, Ca²⁺ promoted TCH adsorption due to formation of tetracycline-Ca²⁺ complexes. The best performing BM-biochar was the one pyrolysed at 600 °C with TCH adsorption amount of 84.54 mg/g. Therefore, this BM-biochar has the potential for TCH removal from aqueous solutions. And the research shed light on the management of organic contaminants in real wastewater by BM-biochar.

Solvent-free synthesis of magnetic biochar and activated carbon through ball-mill extrusion with Fe3O4 nanoparticles for enhancing adsorption of methylene blue

Magnetic carbonaceous adsorbents were synthesized by ball-milling biochar (BC) or activated carbon (AC) with Fe₃O₄ nanoparticles, and their capacities to sorb methylene blue (MB) from water were evaluated and compared. Ball milling with magnetite not only improved the surface properties of the carbonaceous adsorbents, especially BC, but also introduced magnetic properties through mechanical extrusion. Furthermore, ball-mill extrusion increased the MB adsorption capacity of BC at all pH values by 14-fold, on average, but BC ball milled with magnetite had even greater MB adsorption capacity (27-fold, greater, on average). While ball milling of AC also improved its MB adsorption capacity (by almost 3-fold, on average), ball milling with magnetite did not further improve its MB adsorption capacity. All the magnetic adsorbents showed fast MB adsorption kinetics, reaching equilibrium within about 8 h. The Langmuir maximum MB adsorption capacity of the magnetic ball-milled BC (MBM-BC) was the highest (500.5 mg/g) among all the samples including the ones derived from AC. After five adsorption-desorption cycles, MBM-BC maintained about 80% MB removal capacity. The high MB adsorption capacity of MBM-BC was attributed to its increased surface area, opened pore structure, functional groups and aromatic CC bonds, which promoted π-π and electrostatic interactions. Findings from this study indicate that the magnetic ball-milled BC is a promising adsorbent due to its environmentally friendly synthesis, high efficiency, low cost, and convenience in operation.

Enhanced removal of ammonium from water by ball-milled biochar

Novel biochar was prepared by ball milling using bamboo as raw material. The aim of this study was to find a good alternative way to improve the potentials of biochar for ammonium adsorption from aqueous solution. The sorption performance of ball-milled bamboo biochar (BMBB) was compared with that of bamboo biochar (BB) using batch adsorption experiments. Different adsorption kinetics models proved that the pseudo-second order was the best kinetic model for explanation of the adsorption kinetics characteristics, indicative of the energetically heterogeneous solid surface of the biochar. The Langmuir model could fit the isothermal adsorption data of BMBB well. The maximum adsorption capacity of BMBB (22.9 mg g^-1) was much higher than that of BB (7.0 mg g^-1). This study offers a relatively cost-effective and efficient methodology for the improvement in the adsorption capacity of biochar for ammonium nitrogen.

Micro-nano-engineered nitrogenous bone biochar developed with a ball-milling technique for high-efficiency removal of aquatic Cd(II), Cu(II) and Pb(II)

A cost-effective and eco-friendly engineering method to improve biochar's physicochemical and sorption performance is critical in various environmental applications. In this study, micro-nano-engineered nitrogenous biochars derived from cow bone meal pyrolyzed at different temperatures and were engineered with the assistance of a ball-milling technique. The ball-milled bone biochars were natural composites combined with plant biochars and hydroxyapatite components on the micro-nanoscale. Both the micropore area and the external specific surface area of the bone biochars were significantly improved after ball-milling. The sorption capacities for heavy metal ions were heavy metal ions were MBC-600 > MBC-450 > BC-600 > MBC-300 > BC-450 > BC-300, consistent with the variation tendency in the specific surface areas of the bone biochars. The adsorption capacities of MBC-600 for Cd(II), Cu(II) and Pb(II) were 165.77, 287.58 and 558.88 mg/g, respectively (T 298K, pH 5.0), representing increases of 93.91.%, 75.56% and 64.61% compared with the un-milled preparation. Surface complexation, cation exchange, chemical precipitation, electrostatic interaction and cation-π bonding were responsible for the removal of heavy metal ions by bone biochar materials. Taken together, the results show that micro-nano-engineered nitrogenous bone biochar prepared using ball-milling technology is a promising material for the remediation of heavy metals-bearing aquatic environments.

Facile Ball-Milling Synthesis of CuO/Biochar Nanocomposites for Efficient Removal of Reactive Red 120

With the goal of improving the removal of anionic contaminants, copper oxide (CuO)-modified biochar (BC) nanocomposites were successfully prepared through simply ball milling CuO particles with BC. The physicochemical properties of the fabricated CuO/BC nanocomposites were systematically characterized by a series of techniques; their adsorption performances were assessed, and the main adsorption mechanism was revealed. X-ray powder diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analyses of the nanocomposites showed the strong interaction between CuO and BC and confirmed the success of the ball-milling syntheses. Because of strong electrostatic attraction between the embedded CuO nanoparticles and reactive red (RR120), the composited adsorbents exhibited excellent RR120 removal. The 10%-CuO/BC nanocomposite achieved the best RR120 removal efficiency (46%), which is much higher than that of pristine BC (20%). In addition, the adsorption was insensitive to the change of solution initial pH (4-10). The 10%-CuO/BC also showed fast adsorption kinetics (equilibrium time < 3 h) and extremely high adsorption capacity (Langmuir maximum capacity of 1399 mg g^-1) to RR120 in aqueous solutions. Findings from this study demonstrate not only the strong feasibility of ball-milling synthesis of BC-based nanocomposites but also the promising potential of the CuO/BC nanocomposites to remove aqueous anionic contaminants.

Ball milled biochar effectively removes sulfamethoxazole and sulfapyridine antibiotics from water and wastewater

Release of antibiotics into the environment, which often occurs downstream of wastewater treatment plants, poses a human health threat due to the potential development of bacterial antibiotic resistance. In this study, laboratory experiments were conducted to evaluate the performance of ball milled biochar on the removal of two sulfonamide antibiotics, sulfamethoxazole (SMX) and sulfapyridine (SPY) from water and wastewater. Aqueous batch sorption experiment using both pristine and ball milled biochar derived from bagasse (BG), bamboo (BB) and hickory chips (HC), made at three pyrolysis temperatures (300, 450, 600 °C), showed that ball milling greatly enhanced the SMX and SPY adsorption. The 450 °C ball milled HC biochar and BB biochar exhibited the best removal efficiency for SMX (83.3%) and SPY (89.6%), respectively. A range of functional groups were produced by ball milling, leading to the conclusion that the adsorption of sulfonamides on the biochars was controlled by multiple mechanisms including hydrophobic interaction, π-π interaction, hydrogen bonding, and electrostatic interaction. Due to the importance of electrostatic interaction, SMX and SPY adsorption was pH dependent. In laboratory water solutions, the Langmuir maximum adsorption capacities of SMX and SPY reached 100.3 mg/g and 57.9 mg/g, respectively. When tested in real wastewater solution, the 450 °C ball milled biochar still performed well, especially in the removal of SPY. The maximum adsorption capacities of SMX and SPY in wastewater were 25.7 mg/g and 58.6 mg/g, respectively. Thus, ball milled biochar has great potential for SMX and SPY removal from aqueous solutions including wastewater.

MgO modified biochar produced through ball milling: A dual-functional adsorbent for removal of different contaminants

A facile ball-milling method was developed to synthesize MgO/biochar nanocomposites as a dual-functional adsorbent. The physicochemical properties of the synthesized nanocomposites indicated that the composites achieved nano-scaled morphologies and mesoporous structure with MgO nanoparticles, which is approximate 20 nm and dispersed uniformly on the surface of the biochar matrix. Batch sorption experiments yielded 62.9% removal of phosphate, an anion, and 87.5% removal of methylene blue, a cationic organic dye, at low adsorbent dosages of 1.0 g L^-1 and 0.2 g L^-1, respectively. This work indicates that ball milling, as a facile and promising method for synthesis of carbon-metal oxide nanocomposites, lends the advantage of operational flexibility and chemical adjustability for targeted remediation of diverse environmental pollutants.