Life cycle evaluation of microalgae biofuels production: Effect of cultivation system on energy, carbon emission and cost balance analysis

Poly (sodium acrylate-acrylamide) hydrogels for enrichment and purification of microalgal biomass in an open system: performance optimization and mechanistic analysis

Super adsorbent polymer gels can be utilized in microalgal culture systems to concentrate and harvest microalgal biomass through water absorption. In open microalgal culture systems, however, bacteria and other non-algal impurities may affect the water absorption efficiency of the hydrogels and the quality of harvested microalgae. This study prepared and tested hydrogels synthesized with varying sodium acrylate (SA) and acrylamide (AM) ratios in open systems to evaluate their biomass harvesting efficacy. Results showed that when WSA:WAM = 10:0, the chlorophyll a (Chl-a) concentration in the harvested microalgal biomass increased by 417.9 %, the Chl-a/VSS ratio increased by 3.7 %, and the concentration of extracellular polymeric substances (EPS) decreased by 9.5 % compared to the pre-harvest period. Additionally, the number of bacteria adsorbed in the hydrogel particles also significantly increased. It indicates that the poly (sodium acrylate-acrylamide) (PSA-AM) hydrogel absorbed both water and non-algal impurities, achieving both concentration and purification of microalgal biomass. Mechanistic analysis revealed that the pore size and ratio of the PSA-AM hydrogel acted as a sieve, separating microalgal cells from other substances such as water, EPS, and bacterial cells. Given that EPS and bacterial cells are more hydrophilic compared to microalgal cells, it may explain that the hydrogel particles absorbed water while also capturing EPS and bacterial cells. Moreover, the PSA-AM hydrogel exhibited superior reusability. In conclusion, this study provides valuable data and a theoretical basis for the application of PSA-AM hydrogel in open microalgal culture systems, which could further promote the purification of PSA-AM in microalgal biomass utilization by optimizing the preparation of hydrogels.

Environmental Applications of GM Microorganisms: Tiny Critters Posing Huge Challenges for Risk Assessment and Governance

In recent years, the interest in developing genetically modified microorganisms (GMMs), including GMMs developed by genome editing, for use in the environment has significantly increased. However, the scientific knowledge on the ecology of such GMMs is severely limited. There is also little experience at the hands of regulators on how to evaluate the environmental safety of GMMs and on how to assess whether they provide sustainable alternatives to current (agricultural) production systems. This review analyzes two different GMM applications, GM microalgae for biofuel production and nitrogen-fixing GM soil bacteria for use as biofertilizers. We assess the challenges posed by such GMMs for regulatory environmental risk assessment (ERA) against the background of the GMO legislation existing in the European Union (EU). Based on our analysis, we present recommendations for ERA and the monitoring of GMM applications, and in particular for the improvement of the existing EU guidance. We also explore whether existing approaches for technology assessment can provide a framework for the broader assessment of GMM applications. To this end, we recommend developing and implementing an evidence-based sustainability analysis and other methods of technology assessment to support decision making and to address broader societal concerns linked to the use of GMM applications in the environment.

Natural Antimicrobial Agents from Algae: Current Advances and Future Directions

Infectious diseases have significantly shaped human history, leading to significant advancements in medical science. The discovery and development of antibiotics represented a critical breakthrough, but the rise of antibiotic-resistant pathogens now presents a serious global health threat. Due to the limitations of current synthetic antimicrobials, such as toxicity and environmental concerns, it is essential to explore alternative solutions. Algae, particularly microalgae and cyanobacteria, have emerged as promising sources of bioactive antimicrobial compounds. This review provides a comprehensive analysis of the antimicrobial properties of algal-derived compounds, including polysaccharides, fatty acids, and phenols, which have shown effectiveness against multi-drug-resistant bacteria. A co-occurrence bibliometric analysis using VOSviewer highlighted five key research clusters: antibiotic resistance, algal extracts, biosynthesis, water treatment, and novel pharmacological compounds. Furthermore, the primary mechanisms of action of these bioactive compounds, such as the inhibition of protein synthesis and cell membrane disruption, were identified, demonstrating their potential against both common and multi-resistant pathogens. Future research should prioritize optimizing algal biomass production, utilizing genetic and metabolic engineering, and creating innovative delivery systems to enhance the efficient production of bioactive compounds.

Biofuel production: exploring renewable energy solutions for a greener future

Biofuel production has emerged as a leading contender in the quest for renewable energy solutions, offering a promising path toward a greener future. This comprehensive state-of-the-art review delves into the current landscape of biofuel production, exploring its potential as a viable alternative to conventional fossil fuels. This study extensively examines various feedstock options, encompassing diverse sources such as plants, algae, and agricultural waste, and investigates the technological advancements driving biofuel production processes. This review highlights the environmental benefits of biofuels, emphasizing their capacity to significantly reduce greenhouse gas emissions compared to those of fossil fuels. Additionally, this study elucidates the role of biofuels in enhancing energy security by decreasing reliance on finite fossil fuel reserves, thereby mitigating vulnerabilities to geopolitical tensions and price fluctuations. The economic prospects associated with biofuel production are also elucidated, encompassing job creation, rural development, and the potential for additional revenue streams for farmers and landowners engaged in biofuel feedstock cultivation. While highlighting the promise of biofuels, the review also addresses the challenges and considerations surrounding their production. Potential issues such as land use competition, resource availability, and sustainability implications are critically evaluated. Responsible implementation, including proper land-use planning, resource management, and adherence to sustainability criteria, is emphasized as critical for the long-term viability of biofuel production. Moreover, the review underscores the importance of ongoing research and development efforts aimed at enhancing biofuel production efficiency, feedstock productivity, and conversion processes. Technological advancements hold the key to increasing biofuel yields, reducing production costs, and improving overall sustainability. This review uniquely synthesizes the latest advancements across the entire spectrum of biofuel production, from feedstock selection to end-use applications. It addresses critical research gaps by providing a comprehensive analysis of emerging technologies, sustainability metrics, and economic viability of various biofuel pathways. Unlike previous reviews, this work offers an integrated perspective on the interplay between technological innovation, environmental impact, and socio-economic factors in biofuel development, thereby providing a holistic framework for future research and policy directions in renewable energy.

Tailoring molecularly imprinted polymer on titanium-multiwalled carbon nanotube functionalized gold electrode for enhanced chlorophyll determination in microalgae health assessment

A unique method for determining chlorophyll content in microalgae is devised employing a gold interdigitated electrode (G-IDE) with a 10-µm gap, augmented by a nano-molecularly imprinted polymer (nano-MIP) and a titanium dioxide/multiwalled carbon nanotube (TiO2/MWCNT) nanocomposite. The nano-MIP, produced using chlorophyll template voids, successfully trapped chlorophyll, while the TiO2/MWCNT nanocomposite, synthesized by the sol-gel technique, exhibited a consistent distribution and anatase crystalline structure. The rebinding of procured chlorophyll powder, which was used as a template for nano-MIP synthesis, was identified with a high determination coefficient (R2 = 0.9857). By combining the TiO2/MWCNT nanocomposite with nano-MIP, the G-IDE sensing method achieved a slightly better R2 value of 0.9892 for detecting chlorophyll in microalgae. The presented G-IDE sensor showed a significant threefold enhancement in chlorophyll detection compared with commercially available chlorophyll powder. It had a detection limit of 0.917 mL (v/v) and a linear range that spanned from 10-6 to 1 mL. The effectiveness of the sensor in detecting chlorophyll in microalgae was confirmed through validation of its repeatability and reusability.

Ensuring carbon neutrality via algae-based wastewater treatment systems: Progress and future perspectives

The emergence of algal biorefineries has garnered considerable attention to researchers owing to their potential to ensure carbon neutrality via mitigation of atmospheric greenhouse gases. Algae-derived biofuels, characterized by their carbon-neutral nature, stand poised to play a pivotal role in advancing sustainable development initiatives aimed at enhancing environmental and societal well-being. In this context, algae-based wastewater treatment systems are greatly appreciated for their efficacy in nutrient removal and simultaneous bioenergy generation. These systems leverage the growth of algae species on wastewater nutrients-including carbon, nitrogen, and phosphorus-alongside carbon dioxide, thus facilitating a multifaceted approach to pollution remediation. This review seeks to delve into the realization of carbon neutrality through algae-mediated wastewater treatment approaches. Through a comprehensive analysis, this review scrutinizes the trajectory of algae-based wastewater treatment via bibliometric analysis. It subsequently examines the case studies and empirical insights pertaining to algae cultivation, treatment performance analysis, cost and life cycle analyses, and the implementation of optimization methodologies rooted in artificial intelligence and machine learning algorithms for algae-based wastewater treatment systems. By synthesizing these diverse perspectives, this study aims to offer valuable insights for the development of future engineering applications predicated on an in-depth understanding of carbon neutrality within the framework of circular economy paradigms.

A comparative assessment of microbial biodiesel and its life cycle analysis

Biodiesel is a type of sustainable, biodegradable energy made from natural sources like vegetable oils, animal fat, and from microbes. Unlike traditional diesel, it has a lower carbon footprint and produces fewer harmful emissions when burned. Biodiesel has gained popularity as a more sustainable substitute for hydrocarbon-based diesel and may be utilized in diesel engines without any modification. In this review, biodiesel from microorganisms such as algae, yeast, and fungi and advantages over another feedstock were discussed. The life cycle evaluation of biodiesel is a thorough assessment of the ecological and economic effects of biodiesel production and use, from the extraction of raw ingredients to the waste disposal process. The life cycle analysis considers the entire process, including the production of feedstocks, the production of biodiesel, and the use of biodiesel in vehicles and other applications. Life cycle analysis of biodiesel produced from microorganisms takes into consideration the environmental impact and sustainability of each step in the production process, including the impact on land use, water use, greenhouse gas emissions, and the availability of resources. In this section, biodiesel produced from microorganisms and other raw materials, its comparisons, and also steps involved in the life cycle such as the cultivation of microorganisms, harvesting of biomass, and conversion to biodiesel were discussed. The processes like extraction and purification, hydrothermal liquefaction, and their environmental impacts were examined by using various LCA software from the previously mentioned process.

Biomass and hydrocarbon production from Botryococcus braunii: A review focusing on cultivation methods

Botryococcus braunii has garnered significant attention in recent years due to its ability to produce high amounts of renewable hydrocarbons through photosynthesis. As the world shifts towards a greener future and seeks alternative sources of energy, the cultivation of B. braunii and the extraction of its hydrocarbons can potentially provide a viable solution. However, the development of a sustainable and cost-effective process for cultivating B. braunii is not without challenges. Compared to other microalgae, B. braunii grows very slowly, making it time-consuming and expensive to produce biomass. In response to these challenges, several efforts have been put into optimizing Botryococcus braunii cultivation systems to increase biomass growth and hydrocarbon production efficiency. This review presents a comparative analysis of different Botryococcus braunii cultivation systems, and the factors affecting the productivity of biomass and hydrocarbon in Botryococcus braunii are critically discussed. Attached microalgal growth offers several advantages that hold significant potential for enhancing the economic viability of microalgal fuels. Here, we propose that employing attached growth cultivation, coupled with the milking technique for hydrocarbon extraction, represents an efficient approach for generating renewable fuels from B. braunii. Nevertheless, further research is needed to ascertain the viability of large-scale implementation.

Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis

The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.

Life-cycle and economic assessments of microalgae biogas production in suspension and biofilm cultivation systems

Biogas production via anaerobic digestion is highly attractive for microalgae. The technology of microalgae cultivation has profound impacts on biogas production system as it is the most energy-consuming process. However, a comprehensive evaluation of the environmental and economic benefits of different cultivation systems has yet to be sufficiently conducted. Here, life-cycle and economic assessments of open raceway ponds, photobioreactors and biofilm systems were investigated. Results showed greenhouse gas emissions of all systems were positive because more than two-thirds of carbon in fuel gas was lost and the fixed carbon in product gas and solid fertilizer was less than the emitted carbon during energy input. Particularly, biofilm system achieved the least greenhouse gas emissions (9.3 g CO2-eq/MJ), net energy ratio (0.7) and levelized cost of energy (0.9 $/kWh), indicating the optimum cultivation system. Open raceway ponds and photobioreactors failed to achieve positive benefits because of low harvesting efficiency and biomass concentration.

Environmental assessment of Rhodosporidium toruloides-1588 based oil production using wood hydrolysate and crude glycerol

Rhodosporidium toruloides, an oleaginous yeast, is a potential feedstock for biodiesel production due to its ability to utilize lignocellulosic biomass-derived hydrolysate with a considerably high lipid titer of 50-70 % w/w. Hence, for the first-time environmental assessment of large-scale R. toruloides-based biodiesel production from wood hydrolysate and crude glycerol was conducted. The global warming potential was observed to be 0.67 kg CO2 eq./MJ along with terrestrial ecotoxicity of 1.37 kg 1,4-DCB eq./MJ and fossil depletion of 0.13 kg oil eq./MJ. The highest impacts for global warming (∼45 %) and fossil depletion (∼37 %) are attributed to the use of chloroform for lipid extraction while fuel consumption for transportation contributed more than 50 % to terrestrial ecotoxicity. Further, sensitivity analysis revealed that maximizing biodiesel yield by increasing lipid yield and solid loading could contribute to reduced environmental impacts. In nutshell, this investigation reveals that environmental impact varies with the type of chemical utilized.

Life cycle assessment of integrated microalgae oil production in Bojongsoang Wastewater Treatment Plant, Indonesia

This study aims to determine the eco-friendliness of microalgae-based renewable energy production in several scenarios based on life cycle assessment (LCA). The LCA provides critical data for sustainable decision-making and energy requirement analysis, including net energy ratio (NER) and cumulative energy demand (CED). The Centrum voor Milieuwetenschappen Leiden (CML) IA-Baseline was used on environmental impact assessment method by SimaPro v9.3.0.3® software and energy analysis of biofuel production using native polyculture microalgae biomass in municipal wastewater treatment plants (WWTP) Bojongsoang, Bandung, Indonesia. The study was analyzed under three scenarios: (1) the current scenario; (2) the algae scenario without waste heat and carbon dioxide (CO2); and (3) the algae scenario with waste heat and carbon dioxide (CO2). Waste heat and CO2 were obtained from an industrial zone near the WWTP. The results disclosed that the microalgae scenario with waste heat and CO2 utilization is the most promising scenario with the lowest environmental impact (- 0.139 kg CO2eq/MJ), positive energy balance of 1.23 MJ/m3 wastewater (NER > 1), and lower CED value across various impact categories. It indicates that utilizing the waste heat and CO2 has a positive impact on energy efficiency. Based on the environmental impact, NER and CED values, this study suggests that the microalgae scenario with waste heat and CO2 is more feasible and sustainable to adopt and could be implemented at the Bojongsoang WWTP.

Microalgal capture of carbon dioxide: A carbon sink or source?

The rapidly evolving global warming is triggering all levels of actions to reduce industrial carbon emissions, while capturing carbon dioxide of industrial origin via microalgae has attracted increasing attention. This article attempted to offer preliminary analysis on the carbon capture potential of microalgal cultivation. It was shown that the energy consumption-associated with operation and nutrient input could significantly contribute to indirect carbon emissions, making the microalgal capture of carbon dioxide much less effective. In fact, the current microalgae processes may not be environmentally sustainable and economically viable in the scenario where the carbon footprints of both upstream and downstream processing are considered. To address these challenging issues, renewable energy (e.g., solar energy) and cheap nutrient source (e.g., municipal wastewater) should be explored to cut off the indirect carbon emissions of microalgae cultivation, meanwhile produced microalgae, without further processing, should be ideally used as biofertilizer or aquafeeds for realizing complete nutrients recycling.

Utilization of lipidic food waste as low-cost nutrients for enhancing the potentiality of biofuel production from engineered diatom under temperature variations

The scarcity of natural fossil fuels presents a promising opportunity for the development of renewable microalgae-based biofuels. However, the current microalgae cultivation is unable to effectively address the high costs of the production of biofuels. To tackle this challenge, this study focused on recruiting engineered Phaeodactylum tricornutum (FabG-OE) to enhance biomass accumulation and lipid production by employing food waste hydrolysate under temperature variations. The biomass and lipid accumulations of FabG-OE were improved effectively in mixed culture medium and food waste hydrolysate at a volume ratio (v/v) of 80:20 at 30 °C. It was found that oxidative stress might contribute to the overexpression of lipogenic genes, thereby leading to lipogenesis at 30 °C. Upscaling cultivation of FabG-OE at 30 °C using a semi-continuous strategy and batch strategy was conducted to achieve 0.73 and 0.77 g/L/d of biomass containing 0.35 and 0.38 g/L/d of lipid, respectively. In summary, these findings provide valuable insights for advancing microalgae-based biofuel production.

Strategies and challenges to enhance commercial viability of algal biorefineries for biofuel production

The rise in energy consumption would quadruple in the coming century and the, existing energy resources might be insufficient to meet the demand of the growing population. An alternative and sustainable energy resource is therefore needed to address the fossil fuel deficiency. The utility of microalgae strains in the aspect of biorefinery has been in research for quite some time. Algal biorefinery is an alternate way of renewable energy however even after decades of research it still suffers from commercialization bottlenecks. The current manuscript reviews the scenarios where the innovation needs an ignition for its commercialization. This review discusses the prospects of up-scale cultivation, and harvesting algal biomass for biorefineries. It narrates algal biorefinery hurdles that can be solved using integrated technology approach, life cycle assessment and applications of nanotechnology. The review also sheds light upon the ties of algal biorefineries with its economic viability.

Unlocking the potential of microalgae bio-factories for carbon dioxide mitigation: A comprehensive exploration of recent advances, key challenges, and energy-economic insights

Microalgae are promising alternatives to mitigate atmospheric CO₂ owing to their fast growth rates, resilience in the face of adversity and ability to produce a wide range of products, including food, feed supplements, chemicals, and biofuels. However, to fully harness the potential of microalgae-based carbon capture technology, further advancements are required to overcome the associated challenges and limitations, particularly with regards to enhancing CO₂ solubility in the culture medium. This review provides an in-depth analysis of the biological carbon concentrating mechanism and highlights the current approaches, including species selection, optimization of hydrodynamics, and abiotic components, aimed at improving the efficacy of CO₂ solubility and biofixation. Moreover, cutting-edge strategies such as gene mutation, bubble dynamics and nanotechnology are systematically outlined to elevate the CO₂ biofixation capacity of microalgal cells. The review also evaluates the energy and economic feasibility of using microalgae for CO₂ bio-mitigation, including challenges and prospects for future development.

Microalgae Commercialization Using Renewable Lignocellulose Is Economically and Environmentally Viable

Conventional phototrophic cultivation for microalgae production suffers from low and unstable biomass productivity due to limited and unreliable light transmission outdoors. Alternatively, the use of a renewable lignocellulose-derived carbon source, cellulosic hydrolysate, offers a cost-effective and sustainable pathway to cultivate microalgae heterotrophically with high algal growth rate and terminal density. In this study, we evaluate the feasibility of cellulosic hydrolysate-mediated heterotrophic cultivation (Cel-HC) for microalgae production by performing economic and environmental comparisons with phototrophic cultivation through techno-economic analysis and life cycle assessment. We estimate a minimum selling price (MSP) of 4722 USD/t for producing high-purity microalgae through Cel-HC considering annual biomass productivity of 300 t (dry weight), which is competitive with the conventional phototrophic raceway pond system. Revenues from the lignocellulose-derived co-products, xylose and fulvic acid fertilizer, could further reduce the MSP to 2976 USD/t, highlighting the advantages of simultaneously producing high-value products and biofuels in an integrated biorefinery scheme. Further, Cel-HC exhibits lower environmental impacts, such as cumulative energy demand and greenhouse gas emissions, than phototrophic systems, revealing its potential to reduce the carbon intensity of algae-derived commodities. Our results demonstrate the economic and environmental competitiveness of heterotrophic microalgae production based on renewable bio-feedstock of lignocellulose.

Algal biorefinery culminating multiple value-added products: recent advances, emerging trends, opportunities, and challenges

Algal biorefinery is rising as a prominent solution to economically fulfill the escalating global requirement for nutrition, feed, fuel, and medicines. In recent years, scientific productiveness associated with microalgae-based studies has elaborated in multiplied aspects, while translation to the commercial level continues to be missing. The present microalgal biorefinery has a challenge in long-term viability due to escalated market price of algal-mediated biofuels and bioproducts. Advancements are required in a few aspects like improvement in algae processing, energy investment, and cost analysis of microalgae biorefinery. Therefore, it is essential to recognize the modern work by understanding the knowledge gaps and hotspots driving business scale up. The microalgae biorefinery integrated with energy-based products, bioactive and green compounds, focusing on a circular bioeconomy, is urgently needed. A detailed investigation of techno-economic analysis (TEA) and life cycle assessment (LCA) is important to increase the market value of algal products. This review discusses the valorization of algal biomass for the value-added application that holds a sustainable approach and cost-competitive algal biorefinery. The current industries, policies, technology transfer trends, challenges, and future economic outlook are discussed. This study is an overview through scientometric investigation attempt to describe the research development contributing to this rising field.

Enhancing harvest of biodiesel-promising microalgae using Daphnia domesticated by amino acids

Mass production of microalgal biodiesel is hindered by microalgae harvesting efficiency and costs. In this study, Daphnia domesticated by amino acids were used to harvest microalgae via ingesting. The main factors (density of Daphnia, salinity, pH, light-environment, temperature and algal concentration) that were conducive to Daphnia feeding were optimized. Under the optimal condition, Microalgae-feeding Daphnia were domesticated by adding D-glutamic acid and L-cysteine as stimulating factors. After that, the ingestion rate of domesticated Daphnia increased by 24.93%. The presence of Daphnia as a predator can induce microalgae to mass into clusters. Combining Daphnia feeding and the inductive defense flocculation of microalgae, the harvesting rate of mixed algae (Chlorella pyrenoidosa and Scenedesmus obliquus) reached over 95% after 9 h. Overall, this work suggested that Daphnia feeding process is a green and economical approach for microalgae harvesting.

Life cycle assessment of microalgal biorefinery: A state-of-the-art review

Microalgal biorefineries represent an opportunity to economically and environmentally justify the production of bioproducts. The generation of bioproducts within a biorefinery system must quantitatively demonstrate its viability in displacing traditional fossil-based refineries. To this end, several works have conducted life cycle analyses on microalgal biorefineries and have shown technological bottlenecks due to energy-intensive processes. This state-of-the-art review covers different studies that examined microalgal biorefineries through life cycle assessments and has identified strategic technologies for the sustainable production of microalgal biofuels through biorefineries. Different metrics were introduced to supplement life cycle assessment studies for the sustainable production of microalgal biofuel. Challenges in the comparison of various life cycle assessment studies were identified, and the future design choices for microalgal biorefineries were established.

Techno-economic assessment of microalgae production, harvesting and drying for food, feed, cosmetics, and agriculture

The objective of this techno-economic analysis is to define the costs for an industrial microalgae production process, comparing different operation strategies (Nannochloropsis oceanica cultivation during the whole year or cultivation of two species, where Phaeodactylum tricornutum and Tisochrysis lutea alternate), production scales (1 and 10 ha), harvesting technologies (centrifugation or ultrafiltration) and drying methods (freeze-drying or spray drying). This study is based on an industrial scale process established in the south of Portugal. The strategy of cultivating N. oceanica all year round is more attractive from an economic perspective, with production costs of 53.32 €/kg DW and a productivity of 27.61 t/y for a scale of 1 ha, a 49.31% lower cost and two-fold productivity than species alternation culture strategy. These results are for biomass harvested by centrifugation (10.65% biomass cost) and freeze-drying (20.15% biomass cost). These costs could be reduced by 7.03% using a combination of ultrafiltration and spray drying, up to 17.99% if expanded to 10 ha and 10.92% if fertilisers were used instead of commercial nutrient solutions. The study shows potentially competitive costs for functional foods, food, and feed additives, specialised aquaculture products (live feed enrichment) and other high value applications (e.g., cosmetics).

Agro-industrial wastewater-grown microalgae: A techno-environmental assessment of open and closed systems

Microalgae-based treatment can be applied to the bioremediation of agro-industrial wastewater, aiming at a circular economy approach. The present work compared the technical-environmental feasibility of operating a bubble column photobioreactor (PBR) and a high rate pond (HRP) for microalgae biomass production and wastewater treatment of a meat processing facility. The comparison was made regarding biomass productivity, phytoplankton composition, treatment efficiency, life cycle assessment, and energy balance. The daily yields of total biomass and the maximum specific growth rates were 483.33 mg L^-1 d^-1 and 0.23 d^-1 for PBR and 95.00 mg L^-1·d^-1 and 0.193 d^-1 for HRP, respectively, with a predominance of the species Scenedesmus acutus. The treatment efficiency of COD (~50%) and phosphorus (100%) were similar in the two reactors. However, the PBR showed greater assimilation of ammoniacal nitrogen (100% removal) due to the higher microalgal biomass productivity. Environmental impacts were assessed through the ReCiPe methodology for midpoint and endpoint levels. Results revealed that CO₂ supply was the most impactful process for both systems (>60%), but HRP reached lower environmental burdens (-105.90 mPt) than PBR (60.74 mPt). Energy balance through the Net Energy Ratio also resulted in the HPR advantage over the PBR (NER = 14.23 and 1.09, respectively). Still, both reactors present advantages when applied to different valorization routes. At the same time, both present room for improvement in the light of bioeconomy and biorefineries, aiming at sustainable wastewater treatment plants.

Trends on CO2 Capture with Microalgae: A Bibliometric Analysis

The alarming levels of carbon dioxide (CO₂) are an environmental problem that affects the economic growth of the world. CO₂ emissions represent penalties and restrictions due to the high carbon footprint. Therefore, sustainable strategies are required to reduce the negative impact that occurs. Among the potential systems for CO₂ capture are microalgae. These are defined as photosynthetic microorganisms that use CO₂ and sunlight to obtain oxygen (O₂) and generate value-added products such as biofuels, among others. Despite the advantages that microalgae may present, there are still technical–economic challenges that limit industrial-scale commercialization and the use of biomass in the production of added-value compounds. Therefore, this study reviews the current state of research on CO₂ capture with microalgae, for which bibliometric analysis was used to establish the trends of the subject in terms of scientometric parameters. Technological advances in the use of microalgal biomass were also identified. Additionally, it was possible to establish the different cooperation networks between countries, which showed interactions in the search to reduce CO₂ concentrations through microalgae.

A review on the current status and post-pandemic prospects of third-generation biofuels

The rapid increase in fossil fuel depletion, environmental degradations, and industrialization have encouraged the need and production of sustainable fuel alternatives. This has led to the increase in interest in biofuels, especially third-generation biofuels produced from microalgae since they do not compete with food and land supplies. However, the global share for these biofuels has been inadequate recently, especially due to the ongoing global pandemic. Therefore, this paper offers a review of the state-of-the-art study of the production field of third-generation biofuel from microalgae. The current review aims to focus on the different aspects of algal biofuel production that requires further attention to produce it at a large scale. It was found that several strategies during the life cycle of algal biofuel production can significantly increase its quality and yield while reducing cost, energy, and other related attributes. This paper also focuses on the challenges for large-scale production of third-generation biofuels pre and post COVID-19 to better understand the barriers. The high cost of this fuel’s production and sale tends to be the major reason behind the lack of large-scale production, hence, inadequacy to meet the global need. Third-generation biofuel has so much to offer including many integrated applications and advanced uses in the future fuel industry. Therefore, it is important to cope with the ongoing circumstances and emphasize the future of algal biofuel as a sustainable source.

Research trends and market opportunities of microalgal biorefinery technologies from circular bioeconomy perspectives

Microalgae as an alternative feedstock for sustainable bio-products have gained significant interest over years. Even though scientific productivity related to microalgae-based research has increased in recent decades, translation to industrial scale is still lacking. Therefore, it is essential to understand the current state-of-art and, identify research gaps and hotspots driving industrial scale up. The present review through scientometric analysis attempted to delineate the research evolution contributing to this emerging field. The research trends were analysed over the last decade globally highlighting the collaborative network between the countries. The comprehensive knowledge map generated confirmed microalgal biorefinery as a scientifically active field, where the present research interest is focussed on synergistically integrating the unit processes involved to make it enviro-economically feasible. Market opportunities and regulatory policy requirements along with the consensus need to adopt circular bio-economy perspectives were highlighted to facilitate real-time implementation of microalgal biorefinery.

Automated cultivation system for microalgae: Growth factors and control

Background:

Microalgae have been a hot research topic due to their various biorefinery applications, particularly microalgae as potential alternative nutraceuticals and supplements have a large and rapidly growing market. However, the commercial production is limited due to high processing cost, low efficiency, and scale up of biomass production.

Objective:

It is important to control the microalgae cultivation system with optimal parameters to maximize the biomass productivity. The growth factors including pH, temperature, light intensity, salinity, and nutrients are discussed as these can significantly affect the cultivation. To monitor and control these in real-time, an automated system incorporating advanced digital technologies like sensors, controllers, artificial intelligence (AI), and Internet of Things (IoT) could be applied.

Conclusion:

This perspective provides insights on the implementation of an automated microalgae cultivation system which improves the productivity, effectiveness, and efficiency.

Microalgae cultivation in wastewater from agricultural industries to benefit next generation of bioremediation: a bibliometric analysis

The aim of this study was to provide a bibliometric analysis and mapping of existing scientific papers, focusing on microalgae cultivation coupled with biomass production and bioremediation of wastewater from agricultural industries, including cassava, dairy, and coffee. Using the Web of Science (WoS) database for the period 1996-2021, a search was performed using a keyword strategy, aiming at segregating the papers in groups. For the first search step, the keywords "wastewater treatment", AND "microalgae", AND "cassava" OR "dairy" OR "coffee" were used, resulting in 59 papers. For the second step, the keywords "wastewater treatment" AND "biomass productivity" AND "microalgae" AND "economic viability" OR "environmental impacts" were used, which resulted in 34 articles. In these papers, keywords such as "carbon dioxide biofixation" and "removal of nutrients by the production of biomass by microalgae" followed by "environmental and economic impacts" were highlighted. Some of these papers presented an analysis of the economic feasibility of the process, which reveal the state-of-the-art setup required to make the cultivation of microalgae economically viable. Researches focusing on the efficiency of microalgae biomass harvesting are needed to improve the integration of microalgae production in industrial eco-parks using wastewater to achieve the global goal of bioremediation and clean alternatives for renewable energy generation.

Combined effect of CO2 concentration and low-cost urea repletion/starvation in Chlorella vulgaris for ameliorating growth metrics, total and non-polar lipid accumulation and fatty acid composition

Different CO₂ concentration such as 0.03, 5, 10 and 15% and low-cost urea repletion/starvation in Chlorella vulgaris on growth, total and non-polar lipid content and fatty acid composition was studied. Chlorella vulgaris grown at 0.03% CO₂ apparently revealed inferior biomass yield 0.55 g/L on 14th day compared to CO₂ supplemented cells. In the case of CO₂ supply, 15% CO₂ has unveiled higher biomass yield at about 1.83 g/L on day 12 whereas biomass yield for 5 and 10% CO₂ supplemented cells was 1.61 and 1.73 g/L, respectively on 12th day of cultivation. The biomass productivity (g) per liter per day was 32 mg in control condition whereas it was 125, 134 and 144 mg/L/d in 5, 10 and 15% CO₂ supplied cells, respectively. Lipid content of the strain grown at control, 5, 10 and 15% CO₂ was 21.2, 22.1, 23.4 and 24.6%, respectively and however, without CO₂ addition in low-cost urea repleted and urea depleted medium grown cells revealed 21.2 and 24.2%, respectively. Interestingly, strain grown at 15% CO₂ supply in urea deplete medium yielded 28.7% lipid and contribution of non-polar lipids in total lipids is 69.7%. Further, the fatty acid composition of the strain grown in 15% CO₂ supply in urea depleted medium showed C16:0, C16:1, C18:1 and C18:3 in the level of 30.12, 9.98, 23.43, and 11.97%, respectively compared to control and urea amended condition.

Shining a Light on Wastewater Treatment with Microalgae

Microalgae can produce biofuels, nutriceuticals, pigments and many other products, but commercialization has been limited by the cost of growing, harvesting and processing algal biomass. Nutrients, chiefly nitrogen and phosphorus, are a key cost for growing microalgae, but these nutrients are present in abundance in municipal wastewater where they pose environmental problems if not removed. This is not a traditional review article; rather, it is a fact-based set of suggestions that will have to be investigated by scientists and engineers. It is suggested that if microalgae were grown as biofilms rather than as planktonic cells, and if internal illumination rather than external illumination were employed, then the use of microalgae may provide useful improvements to the wastewater treatment process. The use of microalgae to remove nutrients from wastewater has been demonstrated, but has not yet been widely implemented due to cost, and because microalgae derived from wastewater treatment has not yet been demonstrated as a commercial source for value-added products. Future facilities are likely to be called Municipal Resource Recovery Facilities as wastewater will increasingly be viewed as a resource for water, biofuels, fertilizer, monitoring public health and value-added products. Advances in photonics will accelerate this transition.

Co-pyrolysis of microalgae and other biomass wastes for the production of high-quality bio-oil: Progress and prospective

Microalgae are the most prospective raw materials for the production of biofuels, pyrolysis is an effective method to convert biomass into bioenergy. However, biofuels derived from the pyrolysis of microalgae exhibit poor fuel properties due to high content of moisture and protein. Co-pyrolysis is a simple and efficient method to produce high-quality bio-oil from two or more materials. Tires, plastics, and bamboo waste are the optimal co-feedstocks based on the improvement of yield and quality of bio-oil. Moreover, adding catalysts, especially CaO and Cu/HZSM-5, can enhance the quality of bio-oil by increasing aromatics content and decreasing oxygenated and nitrogenous compounds. Consequently, this paper provides a critical review of the production of bio-oil from co-pyrolysis of microalgae with other biomass wastes. Meanwhile, the underlying mechanism of synergistic effects and the catalytic effect on co-pyrolysis are discussed. Finally, the economic viability and prospects of microalgae co-pyrolysis are summarized.

Integrated microalgal biorefinery for the production and application of biostimulants in circular bioeconomy

Adverse detrimental impacts of environmental pollution over the health regimen of people has driven a shift in lifestyle towards cleaner and natural resources, especially in the aspects of food production and consumption. Microalgae are considered a rich source of high value metabolites to be utilized as plant growth biostimulants. These organisms however, are underrated compared to other microbial counterparts, due to inappropriate knowledge on the technical, enviro-economical constrains leading to low market credibility. Thus, to avert these issues, the present review comprehensively discusses the biostimulatory potential of microalgae interactively combined with circular bio-economy perspectives. The biochemical content and intracellular action mechanism of microalgal biostimulants were described. Furthermore, detailed country-wise market trends along with the description of the existing regulatory policies are included. Enviro-techno-economic challenges are discussed, and the consensus need for shift to biorefinery and circular bio-economy concept are emphasized to achieve sustainable impacts during the commercialization of microalgal biostimulants.

Insights into the potential impact of algae-mediated wastewater beneficiation for the circular bioeconomy: A global perspective

Algae-based technologies are one of the emerging solutions to societal issues such as accessibility to clean water and carbon-neutral energy and are a contender for the circular bioeconomy. In this review, recent developments in the use of different algal species for nutrient recovery and biomass production in wastewater, challenges, and future perspectives have been addressed. The ratio and bioavailability of nutrients in wastewater are vital parameters, which significantly impact nutrient recovery efficiency and algal biomass production. However, the optimum nutrient concentration and ratio may vary depending upon the microalgal species as well as cultivation conditions. The use of indigenous algae and algae-based consortia with other microorganisms has been proved promising in improving nutrient recovery efficiency and biomass production in pilot scale operations. However, environmental and cultivation conditions also play a significant role in determining the feasibility of the process. This review further focused on the assessment of the potential benefits of algal biomass production, renewable biofuel generation, and CO₂ sequestration using wastewater in different countries on the basis of available data on wastewater generation and estimated nutrient contents. It was estimated that 5-10% replacement of fossil crude requirement with algal biofuels would require ~952-1903 billion m³ of water, 10-21 billion tons of nitrogen, and 2-4 billion tons of phosphorus fertilizers. In this context, coupling wastewater treatment and algal biomass production seem to be the most sustainable option with potential global benefits of polishing wastewater through nutrients recycling and carbon dioxide sequestration.

Extremophilic Microalgae Galdieria Gen. for Urban Wastewater Treatment: Current State, the Case of “POWER” System, and Future Prospects

Over the past decades, wastewater research has increasingly focused on the use of microalgae as a tool to remove contaminants, entrapping nutrients, and whose biomass could provide both material and energy resources. This review covers the advances in the emerging research on the use in wastewater sector of thermoacidophilic, low-lipid microalgae of the genus Galdieria, which exhibit high content of protein, reserve carbohydrates, and other potentially extractable high-value compounds. The natural tolerance of Galdieria for high toxic environments and hot climates recently made it a key player in a single-step process for municipal wastewater treatment, biomass cultivation and production of energetic compounds using hydrothermal liquefaction. In this system developed in New Mexico, Galdieria proved to be a highly performing organism, able to restore the composition of the effluent to the standards required by the current legislation for the discharge of treated wastewater. Future research efforts should focus on the implementation, in the context of wastewater treatment, of more energetically efficient cultivation systems, potentially capable of generating water with increasingly higher purity levels.

The current status, challenges and prospects of using biomass energy in Ethiopia

Despite enormous challenges in accessing sustainable energy supplies and advanced energy technologies, Ethiopia has one of the world's fastest growing economies. The development of renewable energy technology and the building of a green legacy in the country are being prioritized. The total installed capacity for electricity generation in Ethiopia is 4324.3 MW as on October, 2018. Renewable energy accounts for 96.5% of total generation; however, despite the county's enormous biomass energy potential, only 0.58% of power is generated using biomass. Ethiopia has surplus woody biomass, crop residue and animal dung resources which comprise about 141.8 million metric tons of biomass availability per year. At present the exploited potential is about 71.9 million metric tons per year. This review paper provides an in-depth assessment of Ethiopia's biomass energy availability, potential, challenges, and prospects. The findings show that, despite Ethiopia's vast biomass resource potential, the current use of modern energy from biomass is still limited. As a result, this study supports the use of biomass-based alternative energy sources without having a negative impact on the socioeconomic system or jeopardizing food security or the environment. This finding also shows the challenges, opportunities and possible solutions to tackle the problem to expand alternative energy sources. The most effective techniques for producing and utilizing alternate energy sources were also explored. Moreover, some perspectives are given based on the challenges of using efficient energy production and sustainable uses of biomass energy in Ethiopia as it could be also implemented in other developing countries. We believe that the information in this review will shed light on the current and future prospects of biomass energy deployment in Ethiopia.

Economic Aspects and Sustainability of Ethanol Production—A Systematic Literature Review

Meeting the increasing global energy demand in a sustainable way is a major challenge for humanity. One of the solutions in the transportation sector is ethanol, which is currently the only economically viable direct fuel substitute. In addition to the first-generation technology, which provides the vast majority of production, better results can be continuously realized by using advanced technologies. This study aims to investigate the economic aspects and sustainability issues of ethanol production with a systematic literature review. During the selection process, 64 studies from a total of 16,141 identified articles were analyzed in-depth. There is a consensus that first-generation production methods cannot result in a long-term solution. However, advanced technologies are currently immature, and ethanol production is more expensive with them. The use of wastes/residues and coproducts can improve both the economic outlook and sustainability of the advanced technologies. Overall, the newer generations of technological advancements are constantly improving the environmental performance, whereas the economic performance is deteriorating. Considering low oil prices (0.36 USD/L), none of the ethanol production methods can be competitive on a purely cost basis. This increases the importance of coproducts (further processing and more valuable coproducts). Regarding sustainability, a complex analysis is essential, which must cover at least the environmental, social, and economic aspects. At the methodology level, a complex life cycle analysis seems to be the best tool, as it can take into account these relevant aspects (environmental, economic, and social).

A Review of Energy Consumption in the Acquisition of Bio-Feedstock for Microalgae Biofuel Production

Microalgae biofuel is expected to be an ideal alternative to fossil fuels to mitigate the effects of climate change and the energy crisis. However, the production process of microalgae biofuel is sometimes considered to be energy intensive and uneconomical, which limits its large-scale production. Several cultivation systems are used to acquire feedstock for microalgal biofuels production. The energy consumption of different cultivation systems is different, and the concentration of culture medium (microalgae cells contained in the unit volume of medium) and other properties of microalgae vary with the culture methods, which affects the energy consumption of subsequent processes. This review compared the energy consumption of different cultivation systems, including the open pond system, four types of closed photobioreactor (PBR) systems, and the hybrid cultivation system, and the energy consumption of the subsequent harvesting process. The biomass concentration and areal biomass production of every cultivation system were also analyzed. The results show that the flat-panel PBRs and the column PBRs are both preferred for large-scale biofuel production for high biomass productivity.

Valorization of microalgae biomass into bioproducts promoting circular bioeconomy: a holistic approach of bioremediation and biorefinery

The need for alternative source of fuel has demanded the cultivation of 3rd generation feedstock which includes microalgae, seaweed and cyanobacteria. These phototrophic organisms are unique in a sense that they utilise natural sources like sunlight, water and CO₂ for their growth and metabolism thereby producing diverse products that can be processed to produce biofuel, biochemical, nutraceuticals, feed, biofertilizer and other value added products. But due to low biomass productivity and high harvesting cost, microalgae-based production have not received much attention. Therefore, this review provides the state of the art of the microalgae based biorefinery approach to define an economical and sustainable process. The three major segments that need to be considered for economic microalgae biorefinery is low cost nutrient source, efficient harvesting methods and production of by-products with high market value. This review has outlined the use of various wastewater as nutrient source for simultaneous biomass production and bioremediation. Further, it has highlighted the common harvesting methods used for microalgae and also described various products from both raw biomass and delipidified microalgae residues in order to establish a sustainable, economical microalgae biorefinery with a touch of circular bioeconomy. This review has also discussed various challenges to be considered followed by a techno-economic analysis of the microalgae based biorefinery model.

Coupling of Microalgae Cultivation with Anaerobic Digestion of Poultry Wastes: Toward Sustainable Value Added Bioproducts

Third generation biofuels and high-value bioproducts produced from microalgal biomass have been considered promising long-term sustainable alternatives for energy and/or food production, potentially decreasing greenhouse gas emissions. Microalgae as a source of biofuels have been widely studied for bioethanol/biodiesel/biogas production. However, critical research is needed in order to increase the efficiency of microalgae production from high-N agri-waste, not only for biofuels but also for bio-based products, and thus enhance its commercial viability. The growth in the poultry industry has led to increased chicken manure (CM), which are rich in ammonia, phosphate, potassium, and other trace elements. These constituents could be used as nutrients for growing microalgae. In this research, a two-stage (liquid-solid) anaerobic digester treating CM at 20 ± 1 °C was performed, and liquid digestate (leachate) obtained after the digestion process was used as a substrate to grow the microalgal strain Chlorella vulgaris CPCC 90. Considering the high-N content (NH₃-N: 5314 mg/L; TKN: 6197 mg/L) in liquid digestate, different dilutions were made, using distilled water to obtain viz. 10%, 30%, 50%, 70%, 90%, and 100% of the digestate concentrations for the microalgae cultivation. Preliminary results showed that Chlorella vulgaris CPCC 90 was able to grow and utilize nutrients from a 10% diluted CM digestate. Future research is underway to enhance microalgal growth at higher digestate concentrations and to optimize the use of microalgae/microalgae-bacteria consortia for better adaptation to high-N content wastes. An AD-microalgae coupling scenario has been proposed for the circulation bioeconomy framework.

A life cycle assessment of energy recovery using briquette from wastewater grown microalgae biomass

Microalgae biomass (MB) is a promising source of renewable energy, especially when the cultivation is associated with wastewater treatment. However, microalgae wastewater technologies still have much to improve. Additionally, microalgae biomass valorization routes need to be optimized to be a sustainable and feasible source of green bioenergy. Thus, this paper aimed to evaluate the environmental impacts of the production of briquettes from MB, cultivated during domestic wastewater treatment. Also, it was evaluated how much the drying of the MB affected the life cycle and the environment. Improvements in the life cycle to mitigate the environmental impacts of this energy route were proposed. Cradle-to-gate modeling was applied to obtain a life cycle assessment (LCA) from cultivation to the valorization of MB, through its transformation into a solid biofuel. With LCA, it was possible to identify which technical aspect of the process needs to be optimized so that environmental sustainability can be achieved. Two scenarios were compared, one with the microalgae growth in a high-rate algal pond (HRAP) (scenario 1) and the other in a hybrid reactor, formed by a HRAP and a biofilm reactor (BR) (scenario 2). LCA highlighted the electric power mix, representing, on average, 60% of the total environmental impacts in both scenarios. The valorization of MB in briquettes needs to consume less energy to offset its yield. The environment suffered pressure in freshwater eutrophication, due to the release of 3.1E-05 and 3.9E-05 kg of phosphorus equivalent; in fossil resources scarcity, with the extraction of 1.4E-02 and 4.5E-02 kg of oil equivalent; and in climate change, by the emission of 1.0E-01 and 1.9E-01 kg of carbon dioxide (CO₂) equivalent, in scenarios 1 and 2, respectively. Scenario 1 was highly damaging to terrestrial ecotoxicity, with the release of 3.5E-01 kg of 1,4 Dichlorobenzene, coming from the CO₂ used in MB growth. This category was the one that most negatively pressured the environment, differing from scenario 2, in which this input was not required. This was the only impact category in which scenario 2 had a better environmental performance when compared to scenario 1. Cotton, required in scenario 2, represented up to 87% of emissions in some of the evaluated categories. Despite the impacts that occurred in the two modeled scenarios, the environmental gains due to the use of wastewater for microalgae growth, replacing the synthetic cultivation medium, stood out. In the sensitivity analysis, two alternative scenarios were proposed: (i) electricity consumption for drying has been reduced, due to the natural decrease of MB humidity, and (ii) MB briquettes were considered a substitute for coal briquettes. Results indicated that pressures on climate change and fossil resource scarcity were eliminated in both scenarios and this also occurred for freshwater eutrophication in scenario 2. This paper contributes to the improvement and development of converting MB routes into more sustainable products, causing less pressure on the environment. Also, the study contributes to filling a gap in the literature, discussing methods and technologies to be improved, and consequently making microalgae biotechnology environmentally feasible and a potential renewable energy alternative.

Biomass utilization and production of biofuels from carbon neutral materials

The availability of organic matters in vast quantities from the agricultural/industrial practices has long been a significant environmental challenge. These wastes have created global issues in increasing the levels of BOD or COD in water as well as in soil or air segments. Such wastes can be converted into bioenergy using a specific conversion platform in conjunction with the appropriate utilization of the methods such as anaerobic digestion, secondary waste treatment, or efficient hydrolytic breakdown as these can promote bioenergy production to mitigate the environmental issues. By the proper utilization of waste organics and by adopting innovative approaches, one can develop bioenergy processes to meet the energy needs of the society. Waste organic matters from plant origins or other agro-sources, biopolymers, or complex organic matters (cellulose, hemicelluloses, non-consumable starches or proteins) can be used as cheap raw carbon resources to produce biofuels or biogases to fulfill the ever increasing energy demands. Attempts have been made for bioenergy production by biosynthesizing, methanol, n-butanol, ethanol, algal biodiesel, and biohydrogen using different types of organic matters via biotechnological/chemical routes to meet the world's energy need by producing least amount of toxic gases (reduction up to 20-70% in concentration) in order to promote sustainable green environmental growth. This review emphasizes on the nature of available wastes, different strategies for its breakdown or hydrolysis, efficient microbial systems. Some representative examples of biomasses source that are used for bioenergy production by providing critical information are discussed. Furthermore, bioenergy production from the plant-based organic matters and environmental issues are also discussed. Advanced biofuels from the organic matters are discussed with efficient microbial and chemical processes for the promotion of biofuel production from the utilization of plant biomasses.

A Multi-Objective Life Cycle Optimization Model of an Integrated Algal Biorefinery toward a Sustainable Circular Bioeconomy Considering Resource Recirculation

Biofuel production from microalgae biomass has been considered a viable alternative to harmful fossil fuels; however, challenges are faced regarding its economic sustainability. Process integration to yield various high-value bioproducts is implemented to raise profitability and sustainability. By incorporating a circular economy outlook, recirculation of resource flows is maximized to yield economic and environmental benefits through waste minimization. However, previous modeling studies have not looked into the opportunity of integrating productivity reduction related to the continuous recirculation and reuse of resources until it reaches its end of life. In this work, a novel multi-objective optimization model is developed centered on an algal biorefinery that simultaneously optimizes cost and environmental impact, adopts the principle of resource recovery and recirculation, and incorporates the life cycle assessment methodology to properly account for the environmental impacts of the system. An algal biorefinery involving end-products such as biodiesel, glycerol, biochar, and fertilizer was used for a case study to validate the optimization model. The generated optimal results are assessed and further analyzed through scenario analysis. It was seen that demand fluctuations and process unit efficiencies have significant effect on the optimal results.

Isolation of Industrial Important Bioactive Compounds from Microalgae

Microalgae are known as a rich source of bioactive compounds which exhibit different biological activities. Increased demand for sustainable biomass for production of important bioactive components with various potential especially therapeutic applications has resulted in noticeable interest in algae. Utilisation of microalgae in multiple scopes has been growing in various industries ranging from harnessing renewable energy to exploitation of high-value products. The focuses of this review are on production and the use of value-added components obtained from microalgae with current and potential application in the pharmaceutical, nutraceutical, cosmeceutical, energy and agri-food industries, as well as for bioremediation. Moreover, this work discusses the advantage, potential new beneficial strains, applications, limitations, research gaps and future prospect of microalgae in industry.

Technical insights into the production of green fuel from CO2 sequestered algal biomass: A conceptual review on green energy

Algae a promising energy reserve due to its adaptability, cheap source, sustainability and it's growth ability in wastewater with efficient sequestration of industrial carbon dioxide. This review summarizes the pathways available for biofuel production from carbon sequestered algae biomass. In this regard, this review focuses on microalgae and its cultivation in wastewater with CO₂ sequestration. Conversion of carbon sequestered biomass into bio-fuels via thermo-chemical routes and its engine emission properties. Energy perspective of green gaseous biofuels in near future. This review revealed that algae was the pre-dominant CO₂ sequester than terrestrial plants in an eco-friendly and economical way with simultaneous wastewater remediation. Hydrothermal liquefaction of algae biomass was the most preferred mode for biofuel generation than pyrolysis due to high moisture content. The algae based fuels exhibit less greenhouse gases emission and higher energy value. This review helps the researchers, environmentalists and industrialists to evaluate the impact of algae based bio-energy towards green energy and environment.

Enhancement of biomass yield and lipid accumulation of freshwater microalga Euglena gracilis by phenolic compounds from basic structures of lignin

Introducing biomass-derived additives into microalgae cultivation to increase its yield has been regarded as a more cost-effective and environment-friendly method compared with gene-editing and nutrients supplementation. In this research, feasibility of three major phenolic compounds from lignin's basic structures (guaiacyl-, hydroxyphenyl- and syringyl- types) for freshwater microalga Euglena gracilis cultivation was evaluated. The results indicated that trans-4-hydroxy-3-methoxycinnamic acid (HMA), 4-hydroxybenzaldehyde (HBA), and syringaldehyde (SRA) could all promote microalgae growth in a phytohormone-like role, and the highest promotion effect was achieved under HMA treatment. HMA at 0.5 g·L^-1 enhanced the cell biomass yield by 2.30 times, while HBA and SRA at the concentration of 0.1 g·L^-1 increased the yield by 1.30 and 1.21 times, respectively. In addition, increased carotenoids and lipid biosynthesis were also observed under the treatments of phenolic compounds, which would contribute to the microalgae biofuel production, since the growth and lipid accumulation of E. gracilis were simultaneously enhanced.