Pharmaceuticals residues and xenobiotics contaminants: Occurrence, analytical techniques and sustainable alternatives for wastewater treatment

Environmental risk assessment of pharmaceuticals in wastewaters and reclaimed water from catalan main river basins

Aquatic pollution from pharmaceuticals is a growing environmental concern globally, particularly in Catalonia's primary water bodies, the Llobregat and Besòs rivers. This study investigates pharmaceutical residues in reclaimed water effluents from the Llobregat River and a wastewater treatment plant (WWTP) in the Besòs River, critical contributors to the region's water resources. Employing LC-MS/MS, 85 pharmaceutical residues were monitored, revealing elevated concentrations of tramadol, losartan, and gemfibrozil, commonly prescribed drugs in Catalonia. Surprisingly, downstream concentrations exceeded upstream levels significantly, indicating the adverse impact of reclaimed water on water quality. Furthermore, evaluation of WWTP efficiency displayed varying removal rates, from 10 % to 99.8 %, highlighting treatment inadequacies for certain compounds. Predictive environmental concentrations (PECs) aligned closely with measured values, affirming the utility of predictive models in early-stage research. Risk assessment via the risk quotient (RQ) method identified atorvastatin and chlorpromazine as surpassing toxicity thresholds. This study underscores the urgent need to address pharmaceutical contamination in urban rivers and reclaimed waters in Catalonia. By highlighting treatment inefficacies and potential ecological risks, it contributes to the development of sustainable water management strategies and environmental conservation efforts in the region. Efforts should focus on continuously monitoring specific compounds, evaluating their individual toxicity, and implementing appropriate remediation techniques in WWTPs to safeguard water quality and aquatic ecosystems.

A Luminescent MOF-Based Sensor for Monitoring of an Anticancer Drug and a Pyrethroid Fungicide Biomarker in Wastewater and Biological Fluids

The extensive use of insecticides, such as pyrethroids, and pharmaceutical drugs, such as doxorubicin (DOX) has significantly increased to meet the growing demand for food production and disease treatment. Among them, 3-phenoxybenzoic acid (3-PBA), a metabolite of pyrethroid insecticides, poses various health and environmental risks. Similarly, DOX is a well-known anticancer drug and has been continuously used for many years. The high demand and unregulated disposal of these substances raise concerns for both humans and the environment. To address this issue, there is a pressing need to monitor the presence of these analytes in wastewater to protect our ecosystems. This challenge has inspired us to develop an MOF-based fluorometric dual sensor capable of rapid and selective detection of these analytes in aqueous solutions. This work represents the first MOF-based dual probe for detecting these targeted analytes. There was a 98% fluorescence quenching upon the introduction of DOX whereas about a 11-fold increment of the probe's fluorescence intensity took place in the presence of 3-PBA. The sensitivity of the probe is notably high as limits of detection (LOD) are 8.7 nM for DOX and 1.2 nM for 3-PBA. Our designed probe has the highest KSV value for DOX which is 3.37 × 106 M-1. The MOF demonstrated remarkable rapid response time of just 5 and 10 s for DOX and 3-PBA, respectively. The MOF exhibited outstanding selectivity in detecting DOX and 3-PBA, even when other interfering substances were present. We tested the probe's sensing abilities in various environments, such as serum, urine, wastewater, and different pH levels. These findings underscore the sensor's practicality and usefulness in real-world applications. The underlying mechanisms driving the sensing processes were thoroughly investigated by using various modern analytical methods.

Typical emerging contaminants in sewage treatment plant effluent, and related watersheds in the Pearl River Basin: Ecological risks and source identification

Emerging contaminants pose a potential risk to aquatic ecosystems in the Pearl River Basin, China, owing to the high population density and active industry. This study investigated samples from eight sewage treatment plants, and five surface water bodies of related watersheds. To screen the risk of emerging contaminants (ECs), and clarify their sources, this study calculated the risk quotient of detected chemical and performed source identification/apportionment using the positive matrix factorization method. In total, 149 organic pollutants were identified. Pharmaceuticals showed significant concentrations in sewage treatment plant samples (120.87 ng/L), compared with surface water samples (1.13 ng/L). The ecological risk assessment identified three chemicals with a heightened risk to aquatic organisms: fipronil sulfide, caffeine, and roxithromycin. Four principal sources of contaminants were identified: pharmaceutical wastewater, domestic sewage, medical effluent, and agricultural runoff. Pharmaceutical wastewater was the primary contributor (60.4 %), to the cumulative EC concentration and to ECs in sewage treatment plant effluent. Agricultural drainage was the main source of ECs in surface water. This study provides a strategy to obtain comprehensive information on the aquatic risks and potential sources of EC species in areas affected by artificial activities, which is of substantial importance to pollutant management and control.

Micropollutants (ciprofloxacin and norfloxacin) remediation from wastewater through laccase derived from spent mushroom waste: Fate, toxicity, and degradation

Fluoroquinolone antibiotics frequently found in environmental matrices (wastewater treatment plants, hospital wastewater, industrial wastewater and surface wastewater) causes potential threat to the environment. Enzymatic treatment for degradation of antibiotics from environmental matrices is a green and sustainable approach. Focusing on this, this study aimed to degrade two frequently found fluroquinolone emergent pollutants, ciprofloxacin and norfloxacin from wastewater. The trinuclear cluster of copper ions present in laccase has the ability to effectively remove organic micropollutants (OMPs). The uniqueness of this study is that it utilizes laccase enzyme extracted from spent mushroom waste (SMW) of P. florida for degradation of ciprofloxacin and norfloxacin and to achieve highest degradation efficiency various parameters were tweaked such as pH (3-6), temperature (30 °C and 50 °C), and ABTS (0.05, 0.6, and 1 mM) concentration. The results showed that the most effective degradation of ciprofloxacin (86.12-75.94%) and norfloxacin (83.27-65.94%) was achieved in 3 h at pH 4.5, temperature 30 °C, and 2,2'-azino-bis 3-ethylbenzothiazoline-6-sulfonic acid (ABTS), 0.05 mM concentration. Nevertheless, achieving degradation at 50 °C for both antibiotics, indicates thermostability nature of laccase (P. florida). Further, the fate of transformed products obtained from laccase mediated degradation was confirmed by liquid chromatography (LC-MS). Both the antibiotics undergo decarboxylation, depiperylyzation, dealkylation and defluorination as a result of laccase-mediated bond breakage. Anti-microbial activity of the biodegraded products was monitored by residual anti-bacterial toxicity test (E. coli and Staphylococcus aureus). The biodegraded products were found to be non-toxic and resulted in the growth of E. coli and Staphylococcus aureus, as determined by the agar-diffusion method. Moreover, the storage stability of laccase was determined for 28-day duration at varying pH (3-10) and temperature (4-50 °C). The maximum storage stability was obtained at pH 4.5 and temperature 30 °C. Therefore, utilizing SMW for the degradation of OMPs from wastewater not only benefits in degradation but also reuses SMW agro waste, shedding light on agro waste management. Thus, SMW is a one-pot solution for both OMPs biodegradation and circularity in the economy.

Sustainable approach for the expulsion of metaldehyde: risk, interactions, and mitigation: a review

All pests can be eliminated with the help of pesticides, which can be either natural or synthetic. Because of the excessive use of pesticides, it is harmful to both ecology and people's health. Pesticides are categorised according to several criteria: their chemical composition, method of action, effects, timing of use, source of manufacture, and formulations. Many aquatic animals, birds, and critters live in danger owing to hazardous pesticides. Metaldehyde is available in various forms and causes significant impact even when small amounts are ingested. Metaldehyde can harm wildlife, including dogs, cats, and birds. This review discusses pesticides, their types and potential environmental issues, and metaldehyde's long-term effects. In addition, it examines ways to eliminate metaldehyde from the aquatic ecosystem before concluding by anticipating how pesticides may affect society. The metal-organic framework and other biosorbents have been appropriately synthesized and subsequently represent the amazing removal of pesticides from effluent as an enhanced adsorbent, such as magnetic nano adsorbents. A revision of the risk assessment for metaldehyde residuals in aqueous sources is also attempted.

Development strategies and application of antimicrobial peptides as future alternatives to in-feed antibiotics

The use of in-feed antibiotics has been widely restricted due to the significant environmental pollution and food safety concerns they have caused. Antimicrobial peptides (AMPs) have attracted widespread attention as potential future alternatives to in-feed antibiotics owing to their demonstrated antimicrobial activity and environment friendly characteristics. However, the challenges of weak bioactivity, immature stability, and low production yields of natural AMPs impede practical application in the feed industry. To address these problems, efforts have been made to develop strategies for approaching the AMPs with enhanced properties. Herein, we summarize approaches to improving the properties of AMPs as potential alternatives to in-feed antibiotics, mainly including optimization of structural parameters, sequence modification, selection of microbial hosts, fusion expression, and industrially fermentation control. Additionally, the potential for application of AMPs in animal husbandry is discussed. This comprehensive review lays a strong theoretical foundation for the development of in-feed AMPs to achieve the public health globally.

Photocatalytic Degradation of Naproxen: Intermediates and Total Reaction Mechanism

Photochemical and photocatalytic oxidation of naproxen (NPX) with UV-A light and commercial TiO2 under constant flow of oxygen have been investigated. Adsorption experiments indicated that 90% of the solute remained in the solution. Combined chemical analysis of samples on the photochemical degradation indicated that NPX in an aqueous solution (20 ppm) is efficiently transformed into other species but only 18% of the reactant is mineralized into CO2 and water after three hours of reaction. Performing the photocatalytic oxidation in the presence of TiO2, more than 80% of the organic compounds are mineralized by reactive oxidation species (ROS) within four hours of reaction. Analysis of reaction mixtures by a combination of analytical techniques indicated that naproxen is transformed into several aromatic naphthalene derivatives. These latter compounds are eventually transformed into polyhydroxylated aromatic compounds that are strongly adsorbed onto the TiO2 surface and are quickly oxidized into low-molecular-weight acids by an electron transfer mechanism. Based on this and previous studies on NPX photocatalytic oxidation, a unified and complete degradation mechanism is presented.

Resource recovery of high value-added products from wastewater: Current status and prospects

Wastewater resource recovery not only allows the extraction of value-added products and offsets the operational costs of wastewater treatment, but it is also conducive to alleviating adverse environmental issues due to energy and chemical inputs and associated emissions. A number of attractive compounds such as alginate-like polymers, struvite, polyhydroxyalkanoates, and sulfated polysaccharides, were found and successfully obtained from wastewater and have a wide range of application prospects. The aim of this work is to provide a comprehensive review of recent advances in recovery of these popular products from wastewater, and their physicochemical properties, main sources, and current recovery status are summarized. Various factors influencing the recovery performance of these materials are thoroughly discussed. Moreover, the research needs and future directions towards wastewater resource recovery are highlighted. This study can provide valuable insights for future research endeavors aiming to improve wastewater resource recovery through the retrieval of high value-added products.

Evaluation of organo-vermiculites as sorbent phases for solid-phase extraction of ibuprofen from water

The study of ibuprofen (IBU) preconcentration was carried out making use of a homemade column for solid-phase extraction (SPE), using vermiculite (VT) or organo-vermiculites (OVTs) as sorbent phases. Aqueous samples (50.0 mL) percolated the column and IBU was sorbed onto the VT or OVT and then desorbed using acetonitrile. Employing this SPE system and OVT, calibration curves were generated for IBU, by spectrophotometric quantification using the α-naphthylamine method. R2 values higher than 0.9950 and LOD between 12 and 18 μg L-1 were observed, for real enrichment factors of 21 and 31, by using OVTs. The analytical protocol was applied to three water samples, which were spiked with IBU solutions to evaluate the precision and accuracy of the method. Recoveries between 77 and 110% at three different IBU concentrations and RSD lower than 18% were observed, even by using the spectrophotometric method. The protocol developed in this study demonstrated that the OVT was appropriate to work as a preconcentration phase for IBU determination in water samples.

Advanced oxidation process of valsartan by activated peroxymonosulfate: Chemical characterization and ecotoxicological effects of its byproducts

In recent years, the antihypertensive drug Valsartan (VAL) has been detected in surface waters up to concentrations of 6300 ng/L, due to its high consumption and its mostly unchanged excretion. Moreover, wastewater treatment plants fail to completely mineralize/transform it, as evidenced by findings of up to 3800 ng/L in some effluents. In this paper, the possible degradation of VAL was evaluated through Fenton-like reaction with activation of peroxymonosulfate in the presence of Fe(II) under neutral conditions. Fourteen degradation byproducts were isolated and completely identified by both nuclear magnetic resonance and mass spectrometry, five of which were discovered for the first time, and a mechanism of their formation was proposed. Furthermore, the potential acute and chronic toxicity of valsartan and its byproducts in the aquatic environment were evaluated in key organisms of the freshwater trophic chain belonging to producers and consumers, the alga Raphidocelis subcapitata and the rotifer Brachionus calyciflorus, respectively. Acute effects occurred at concentrations in the order of tens/hundreds of mg/L, far from those of environmental concern. As regards chronic effects, algae were not particularly affected by the parent compound and its derivatives, while rotifers were less affected by derivatives (effective concentrations at units/tens of μg/L) compared to valsartan (effective concentrations at hundreds of ng/L).

Sediment microbial community characteristics in sea cucumber restocking area

Variations of microbial species and functional composition in coastal sediment are usually taken as the results of the provision of supplementary nutrients affected by human activities. However, responses of microbiome stability to restocking biological resources remain less understood in coastal benthic systems without nutrient supplements. Here, combined with metagenomics and microbiome co-occurrence networks, the composition, function, and community stability of microbes were evaluated in a coastal area where sea cucumbers (Apostichopus japonicus) restocked after six months. Also, the physicochemical characteristics of sediments and bottom water were analyzed. We found the total organic carbon, total nitrogen, and total phosphorus of sediment did not change significantly in the restocking area after six months, whereas the concentration of dissolved inorganic nitrogen in bottom water increased significantly. Moreover, the relative abundance of Nitrospina at the class level was increased significantly in the restocking area. Also, enzymes related to nitrate reduction and nitrous oxide reductase were increased in the restocking area. Of note, stock enhancement of sea cucumbers altered associations between bacteria rather than their composition. The elimination of negative associations and reduction of the potential keystone taxa in the restocking area indicated destabilized bacterial communities. Our work may contribute to elucidating the response of microbial stability to stock enhancement. This finding also suggests that microbial community stability can be considered as an indicator of ecological risk under the influence of stock enhancement.

Removal of contaminants of emerging concern from the supernatant of anaerobically digested sludge by O3 and O3/H2O2: Ozone requirements, effects of the matrix, and toxicity

Digestate is a rich source of nutrients that can be applied in agricultural fields as fertilizer or irrigation water. However, most of the research about application of digestate have focused on its agronomic properties and neglected the potential harm of the presence of contaminants of emerging concern (CECs). Aadvanced oxidation processes (AOPs) have proved to be effective for removing these compounds from drinking water, yet there are some constrains to treat wastewater and digestate mainly due to their complex matrix. In this study, the feasibility to remove different CECs from digestate using O3 and O3/H2O2 was assessed, and the general effect of the matrix in the oxidation was explained. While the lab-scale ozonation provided an ozone dose of 1.49 mg O3/mg DOC in 5 h treatment, almost all the compounds were removed at a lower ozone dose of maximum 0.48 mg O3/mg DOC; only ibuprofen required a higher dose of 1.1 mg O3/mg DOC to be oxidized. The digestate matrix slowed down the kinetic ozonation rate to approximately 1% compared to the removal rate in demineralized water. The combined treatment (O3/H2O2) showed the additional contribution of H2O2 by decreasing the ozone demand by 59-75% for all the compounds. The acute toxicity of the digestate, measured by the inhibition of Vibrio fisheries luminescence, decreased by 18.1% during 5 h ozonation, and by 34% during 5 h O3/H2O2 treatment. Despite the high ozone consumption, the ozone dose (mg O3/mg DOC) required to remove all CECs from digestate supernatant was in the range or lower than what has been reported for other (waste-)water matrix, implying that ozonation can be considered as a post-AD treatment to produce cleaner stream for agricultural purposes.

Environmental assessment of on-site source-separated wastewater treatment and reuse systems for resource recovery in a sustainable sanitation view

Sustainable sanitation solutions are necessary for promoting public health and environmental security. In this study, on-site domestic wastewater treatment (WWT) systems used for households in rural and peri-urban areas of Brazil were compared in different scenarios from a life cycle assessment (LCA) perspective. The evaluated scenarios represented different practices in wastewater management, such as direct discharge into the soil, rudimentary treatment, septic tank, public sewerage system, and source separation of wastewater streams for water, nutrient, and organic matter recovery. The WWT technologies considered in the proposed scenarios of source-separated wastewater streams were as follows: an evapotranspiration tank (TEvap) and composting toilet for blackwater, a modified constructed wetland (EvaTAC) for greywater, and a storage tank for urine. LCA was performed in this study according to the ISO standards to assess the environmental impacts at both midpoint and endpoint levels. The results show that on-site source-separated wastewater treatment systems with resource recovery result in significant reductions in environmental impacts compared to scenarios with precarious conditions or 'end-of-pipe' solutions. For example, regarding the human health damage category, the scenarios involving resource recovery, including systems such as EvaTAC, TEvap, composting toilet, and urine storage tank, demonstrate significantly lower values (-0.0117 to -0.0115 DALY) compared to scenarios with rudimentary cesspits and septic tanks (0.0003 to 0.001 DALY). We conclude that the focus should be beyond mere pollution aspects and instead concentrate on the benefits of the co-products, which are: avoiding the extraction and consumption of valuable and increasingly scarce raw materials, such as potable water, and production of synthetic fertilizer. Furthermore, it is highly recommended that an LCA of sanitation systems synergistically integrates the WWT process, the constructive aspects, and the resource recovery potential.

Global trends in the research and development of medical/pharmaceutical wastewater treatment over the half-century

The COVID-19 pandemic has severely impacted public health and the worldwide economy. The overstretched operation of health systems around the world is accompanied by potential and ongoing environmental threats. At present, comprehensive scientific assessments of research on temporal changes in medical/pharmaceutical wastewater (MPWW), as well as estimations of researcher networks and scientific productivity are lacking. Therefore, we conducted a thorough literature study, using bibliometrics to reproduce research on medical wastewater over nearly half a century. Our primary goal is systematically to map the evolution of keyword clusters over time, and to obtain the structure and credibility of clusters. Our secondary objective was to measure research network performance (country, institution, and author) using CiteSpace and VOSviewer. We extracted 2306 papers published between 1981 and 2022. The co-cited reference network identified 16 clusters with well-structured networks (Q = 0.7716, S = 0.896). The main trends were as follows: 1) Early MPWW research prioritized sources of wastewater, and this cluster was considered to be the mainstream research frontier and direction, representing an important source and priority research area. 2) Mid-term research focused on characteristic contaminants and detection technologies. Particularly during 2000-2010, a period of rapid developments in global medical systems, pharmaceutical compounds (PhCs) in MPWW were recognized as a major threat to human health and the environment. 3) Recent research has focused on novel degradation technologies for PhC-containing MPWW, with high scores for research on biological methods. Wastewater-based epidemiology has emerged as being consistent with or predictive of the number of confirmed COVID-19 cases. Therefore, the application of MPWW in COVID-19 tracing will be of great interest to environmentalists. These results could guide the future direction of funding agencies and research groups.

Wastewater treatment plants, an "escape gate" for ESCAPE pathogens

Antibiotics are an essential tool of modern medicine, contributing to significantly decreasing mortality and morbidity rates from infectious diseases. However, persistent misuse of these drugs has accelerated the evolution of antibiotic resistance, negatively impacting clinical practice. The environment contributes to both the evolution and transmission of resistance. From all anthropically polluted aquatic environments, wastewater treatment plants (WWTPs) are probably the main reservoirs of resistant pathogens. They should be regarded as critical control points for preventing or reducing the release of antibiotics, antibiotic-resistant bacteria (ARB), and antibiotic-resistance genes (ARGs) into the natural environment. This review focuses on the fate of the pathogens Enterococcus faecium, Staphylococcus aureus, Clostridium difficile, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacteriaceae spp. (ESCAPE) in WWTPs. All ESCAPE pathogen species, including high-risk clones and resistance determinants to last-resort antibiotics such as carbapenems, colistin, and multi-drug resistance platforms, were detected in wastewater. The whole genome sequencing studies demonstrate the clonal relationships and dissemination of Gram-negative ESCAPE species into the wastewater via hospital effluents and the enrichment of virulence and resistance determinants of S. aureus and enterococci in WWTPs. Therefore, the efficiency of different wastewater treatment processes regarding the removal of clinically relevant ARB species and ARGs, as well as the influence of water quality factors on their performance, should be explored and monitored, along with the development of more effective treatments and appropriate indicators (ESCAPE bacteria and/or ARGs). This knowledge will allow the development of quality standards for point sources and effluents to consolidate the WWTP barrier role against the environmental and public health AR threats.

The impact of pharmaceutical pollutants on daphnids - A metabolomic approach

Pharmaceuticals have been classified as emerging contaminants in the aquatic ecosystem, mainly due to their increased use and improper disposal. A significant range of pharmaceutical compounds and their metabolites have been globally detected in surface waters and pose detrimental effects to non-target organisms. Monitoring pharmaceutical water pollution relies on the analytical approaches for their detection, however, such approaches are limited by their sensitivity limit and coverage of the wide range pharmaceutical compounds. This lack of realism in risk assessment is bypassed with effect-based methods, which are complemented by chemical screening and impact modelling, and are able to provide mechanistic insight for pollution. Focusing on the freshwater ecosystem, in this study we evaluated the acute effects on daphnids for three distinct groups of pharmaceuticals; antibiotics, estrogens, and a range of commonly encountered environmentally relevant pharmaceutical pollutants. Combining several endpoints such as mortality, biochemical (enzyme activities) and holistic (metabolomics) we discovered distinct patterns in biological responses. In this study, changes in enzymes of metabolism e.g. phosphatases and lipase, as well as the detoxification enzyme, glutathione-S-transferase, were recorded following acute exposure to the selected pharmaceuticals. A targeted analysis of the hydrophilic profile of daphnids revealed mainly the up-regulation of metabolites following metformin, gabapentin, amoxicillin, trimethoprim and β-estradiol. Whereas gemfibrozil, sulfamethoxazole and oestrone exposure resulted in the down-regulation of majority of metabolites.

Advanced oxidation and a metrological strategy based on CLC-MS for the removal of pharmaceuticals from pore & surface water

In this work, it is studied the photolysis, electrolysis, and photo-electrolysis of a mixture of pharmaceutics (sulfadiazine, naproxen, diclofenac, ketoprofen and ibuprofen) contained in two very different types of real water matrices (obtained from surface and porewater reservoirs), trying to clarify the role of the matrix on the degradation of the pollutants. To do this, a new metrological approach was also developed for screening of pharmaceuticals in waters by capillary liquid chromatography mass spectrometry (CLC-MS). This allows the detection at concentrations lower than 10 ng mL^-1. Results obtained in the degradation tests demonstrate that inorganic composition of the water matrix directly influences on the efficiency of the drugs removal by the different EAOPs and better degradation results were obtained for experiments carried out with surface water. The most recalcitrant drug studied was ibuprofen for all processes evaluated, while diclofenac and ketoprofen were found to be the easiest drugs for being degraded. Photo-electrolysis was found to be more efficient than photolysis and electrolysis, and the increase in the current density was found to attain a slight improvement in the removal although with an associated huge increase in the energy consumption. The main reaction pathways for each drug and technology were also proposed.

Hazard and health risk assessment of exposure to pharmaceutical active compounds via toxicological evaluation by zebrafish

The uncontrolled or continuous release of effluents from wastewater treatment plants leads to the omnipresence of pharmaceutical active compounds (PhACs) in the aquatic media. Today, this is a confirmed problem becoming a main subject of twin public and scientific concerns. However, still little information is available about the long-term impacts of these PhACs on aquatic organisms. In this review, efforts were made to reveal correlation between the occurrence in the environment, ecotoxicological and health risks of different PhACs via toxicological evaluation by zebrafish (Danio rerio). This animal model served as a bioindicator for any health impacts after the exposure to these contaminants and to better understand the responses in relation to human diseases. This review paper focused on the calculation of Risk Quotients (RQs) of 34 PhACs based on environmental and ecotoxicological data available in the literature and prediction from the ECOSAR V2.2 software. To the best of the authors' knowledge, this is the first report on the risk assessment of PhACs by the two different methods as mentioned above. RQs showed greater difference in potential environmental risks of the PhACs. These differences in risk values underline the importance of environmental and experimental factors in exposure conditions and the interpretation of RQ values. While the results showed high risk to Danio rerio of the majority of PhACs, risk qualification of the others varied between moderate to insignifiant. Further research is needed to assess pharmaceutical hazards when present in wastewater before discharge and monitor the effectiveness of treatment processes. The recent new advances in the morphological assessment of toxicant-exposed zebrafish larvae for the determination of test compounds effects on the developmental endpoints were also discussed. This review emphasizes the need for strict regulations on the release of PhACs into environmental media in order to minimize their toxicity to aquatic organisms.

Microplastic sources, formation, toxicity and remediation: a review

Microplastic pollution is becoming a major issue for human health due to the recent discovery of microplastics in most ecosystems. Here, we review the sources, formation, occurrence, toxicity and remediation methods of microplastics. We distinguish ocean-based and land-based sources of microplastics. Microplastics have been found in biological samples such as faeces, sputum, saliva, blood and placenta. Cancer, intestinal, pulmonary, cardiovascular, infectious and inflammatory diseases are induced or mediated by microplastics. Microplastic exposure during pregnancy and maternal period is also discussed. Remediation methods include coagulation, membrane bioreactors, sand filtration, adsorption, photocatalytic degradation, electrocoagulation and magnetic separation. Control strategies comprise reducing plastic usage, behavioural change, and using biodegradable plastics. Global plastic production has risen dramatically over the past 70 years to reach 359 million tonnes. China is the world's top producer, contributing 17.5% to global production, while Turkey generates the most plastic waste in the Mediterranean region, at 144 tonnes per day. Microplastics comprise 75% of marine waste, with land-based sources responsible for 80-90% of pollution, while ocean-based sources account for only 10-20%. Microplastics induce toxic effects on humans and animals, such as cytotoxicity, immune response, oxidative stress, barrier attributes, and genotoxicity, even at minimal dosages of 10 μg/mL. Ingestion of microplastics by marine animals results in alterations in gastrointestinal tract physiology, immune system depression, oxidative stress, cytotoxicity, differential gene expression, and growth inhibition. Furthermore, bioaccumulation of microplastics in the tissues of aquatic organisms can have adverse effects on the aquatic ecosystem, with potential transmission of microplastics to humans and birds. Changing individual behaviours and governmental actions, such as implementing bans, taxes, or pricing on plastic carrier bags, has significantly reduced plastic consumption to 8-85% in various countries worldwide. The microplastic minimisation approach follows an upside-down pyramid, starting with prevention, followed by reducing, reusing, recycling, recovering, and ending with disposal as the least preferable option.

Animal sourced biopolymer for mitigating xenobiotics and hazardous materials

Over the past several decades, xenobiotic chemicals have badly affected the environment including human health, ecosystem and environment. Animal-sourced biopolymers have been employed for the removal of heavy metals and organic dyes from the contaminated soil and waste waters. Animal-sourced biopolymers are biocompatible, cost-effective, eco-friendly, and sustainable in nature which make them a favorable choice for the mitigation of xenobiotic and hazardous compounds. Chitin/chitosan, collagen, gelatin, keratin, and silk fibroin-based biopolymers are the most commonly used biopolymers. This chapter reviews the current challenge faced in applying these animal-based biopolymers in eliminating/neutralizing various recalcitrant chemicals and dyes from the environment. This chapter ends with the discussion on the recent advancements and future development in the employability of these biopolymers in such environmental applications.

Recent advances in the biological treatment of wastewater rich in emerging pollutants produced by pharmaceutical industrial discharges

Pharmaceuticals and personal care products present potential risks to human health and the environment. In particular, wastewater treatment plants often detect emerging pollutants that disrupt biological treatment. The activated sludge process is a traditional biological method with a lower capital cost and limited operating requirements than more advanced treatment methods. In addition, the membrane bioreactor combines a membrane module and a bioreactor, widely used as an advanced method for treating pharmaceutical wastewater with good pollution performance. Indeed, the fouling of the membrane remains a major problem in this process. In addition, anaerobic membrane bioreactors can treat complex pharmaceutical waste while recovering energy and producing nutrient-rich wastewater for irrigation. Wastewater characterizations have shown that wastewater's high organic matter content facilitates the selection of low-cost, low-nutrient, low-surface-area, and effective anaerobic methods for drug degradation and reduces pollution. However, to improve the biological treatment, researchers have turned to hybrid processes in which all physical, chemical, and biological treatment methods are integrated to remove various emerging contaminants effectively. Hybrid systems can generate bioenergy, which helps reduce the operating costs of the pharmaceutical waste treatment system. To find the most effective treatment technique for our research, this work lists the different biological treatment techniques cited in the literature, such as activated sludge, membrane bioreactor, anaerobic treatment, and hybrid treatment, combining physicochemical and biological techniques.

Amine-Functionalized Natural Rubber/Mesostructured Silica Nanocomposites for Adsorptive Removal of Clofibric Acid in Aqueous Phase

This study is the first report on the synthesis, characterization and application of amine-functionalized mesoporous nanocomposites based on natural rubber (NR) and wormhole-like mesostructured silica (WMS). In comparison with amine-functionalized WMS (WMS-NH₂), a series of NR/WMS-NH₂ composites were synthesized via an in situ sol-gel method in which the organo-amine group was grafted onto the nanocomposite surface via co-condensation with 3-aminopropyltrimethoxysilane (APS) as the amine-functional group precursor. The NR/WMS-NH₂ materials had a high specific surface area (115-492 m² g^-1) and total pore volume (0.14-1.34 cm³ g^-1) with uniform wormhole-like mesoporous frameworks. The amine concentration of NR/WMS-NH₂ (0.43-1.84 mmol g^-1) was increased with an increase in the APS concentration, corresponding to high levels of functionalization with the amine groups of 53-84%. The H₂O adsorption-desorption measurement revealed that NR/WMS-NH₂ possessed higher hydrophobicity than WMS-NH₂. The removal of clofibric acid (CFA), a xenobiotic metabolite of the lipid-lowering drug clofibrate, from the aqueous solution using WMS-NH₂ and NR/WMS-NH₂ materials was investigated using a batch adsorption experiment. The adsorption was a chemical process in which the pseudo-second order kinetic model expressed the sorption kinetic data better than the pseudo first-order and Ritchie-second kinetic order model. In addition, the CFA adsorption sorption equilibrium data of the NR/WMS-NH₂ materials were fitted to the Langmuir isotherm model. The NR/WMS-NH₂ with 5% amine loading had the highest CFA adsorption capacity (6.29 mg g^-1).

Synchronous COD removal and nitrogen recovery from high concentrated pharmaceutical wastewater by an integrated chemo-biocatalytic reactor systems

Present report, an investigation of highly concentrated and low bio-degradable pharmaceutical wastewater (HCPWW) treatment; simultaneously ammoniacal nitrogen recovery for struvite fertilizer. The use of multiple solvents and many formulation processes in HCPWW, resulting highly refractory chemicals. Here, in this study focused on evaluation of chemo-biocatalysts for the removal of refractory organics, nitrogen recovery from HCPWW. The initial organics, and nitrogen content in HCPWW was 20,753 ± 4606 mg/L; BOD, 6550 ± 1500 mg/L and NH₄⁺-N, 1057.9 ± 185.8 mg/L. Initially, the biodegradability (BOD₅: COD ratio from 0.32 to 0.45) of HCPWW, which was improved by heterogeneous Fenton oxidation (HFO) processes, and porous carbon (PCC, 30 g/L), along with FeSO₄.7H₂O, 200 mg/L and H₂O₂ (30% v/v), 0.4 ml/L were used as a catalyst in a weakly acidic medium. For the biocatalytic processes, the microbial culture cultivated from sewage and incorporated into a Fluidized Immobilized Carbon Catalytic Oxidation reactor (FICCO), and dominant species are Pseudomonas Putida sp., Pseudomonas Kilionesis sp., and Pseudomonas Japonica sp., which is identified by using 16 S rDNA sequencing analysis. The COD and BOD₅ removal efficiency of 65-93% and 70-82%, and follow the pseudo-second-order kinetic model with the rate constants of 1.0 × 10^-4 L COD^-1 h^-1, 1.5 × 10^-3 L COD^-1 h^-1 and 3.0 × 10^-3 L COD^-1 h^-1 in the HFO-FICCO-CAACO catalytic processes. The optimized hydraulic retention time (HRT) of FICCO reactor was 24 h, and 1 h for the Chemo-Autotrophic Activated Carbon Oxidation (CAACO) reactor for maximum organics removal. MAP (Magnesium Ammonium Phosphate precipitation) process showed 90% of NH₄⁺-N elimination and recovered it as a struvite fertilizer at an optimum molar ratio of 1:1.3:1.3 (NH₄⁺-N: Na₂HPO₄.2H₂O: MgO). FT-IR, UV-visible, and UV-fluorescence data confirm the effective elimination of organics. Hence, this integrated treatment system is appropriate for the management of pharmaceutical wastewater especially elimination of complex organic molecules and the recovery of nitrogen in the wastewater.

Survival of Nematode Larvae Strongyloides papillosus and Haemonchus contortus under the Influence of Various Groups of Organic Compounds

Many chemically synthesized xenobiotics can significantly inhibit the vitality of parasitic nematodes. However, there is yet too little research on the toxicity of such contaminating compounds toward nematodes. Compounds that are present in plants are able to inhibit the vitality of parasitic organisms as well. According to the results of our laboratory studies of toxicity, the following xenobiotics caused no decrease in the vitality of the larvae of Strongyloides papillosus and Haemonchus contortus: methanol, propan-2-ol, propylene glycol-1,2, octadecanol-1, 4-methyl-2-pen-tanol, 2-ethoxyethanol, butyl glycol, 2-pentanone, cyclopentanol, ortho-dimethylbenzene, dibutyl phthalate, succinic anhydride, 2-methylfuran, 2-methyl-5-nitroimidazole. Strong toxicity towards the nematode larvae was exerted by glutaraldehyde, 1,4-diethyl 2-methyl-3-oxobutanedioate, hexylamine, diethyl malonate, allyl acetoacetate, tert butyl carboxylic acid, butyl acrylate, 3-methyl-2-butanone, isobutyraldehyde, methyl acetoacetate, ethyl acetoacetate, ethyl pyruvate, 3-methylbutanal, cyclohexanol, cyclooctanone, phenol, pyrocatechin, resorcinol, naphthol-2, phenyl ether, piperonyl alcohol, 3-furoic acid, maleic anhydrid, 5-methylfurfural, thioacetic acid, butan-1-amine, dimethylformamide, 1-phenylethan-1-amine, 3-aminobenzoic acid. Widespread natural compounds (phytol, 3-hydroxy-2-butanone, maleic acid, oleic acid, hydroquinone, gallic acid-1-hydrate, taurine, 6-aminocaproic acid, glutamic acid, carnitine, ornithine monohydrochloride) had no negative effect on the larvae of S. papillosus and H. contortus. A powerful decrease in the vitality of nematode larvae was produced by 3,7-dimethyl-6-octenoic acid, isovaleric acid, glycolic acid, 2-oxopentanedioic acid, 2-methylbutanoic acid, anisole, 4-hydroxy-3-methoxybenzyl alcohol, furfuryl alcohol. The results of our studies allow us to consider 28 of the 62 compounds we studied as promising for further research on anti-nematode activity in manufacturing conditions.

Contaminants of emerging concerns (CECs) in a municipal wastewater treatment plant in Indonesia

This study provides the first set of quantitative data on the occurrence and fate of a wide range of contaminants of emerging concerns (CECs) in Indonesia's largest wastewater treatment plant (WWTP). The WWTP employs waste stabilization ponds (WSPs) as the secondary treatment before discharging the effluent to the Citarum River. Fourteen out of twenty-two monitored CECs were detected in the wastewater influent, and seven were present in the effluent, with a total concentration of 29.8 ± 0.4 µg/L and 0.5 ± 0.0 µg/L, respectively. The occurrence of the CECs in this study was found to be well correlated with their possible use and known detection in surface waters in Indonesia. Caffeine (CAF) at 12.2 ± 0.1 µg/L, acetaminophen (ACT) at 9.1 ± 0.1 µg/L, N,N-diethyl-m-toluamide (DEET) at 5.0 ± 0.1 µg/L, ibuprofen (IBU) at 2.3 ± 0.0 µg/L, and triclosan (TCS) at 470 ± 64 ng/L were discovered as the five most prevalent CECs, followed by bisphenol A (BPA), trimethoprim (TMP), Tris(2-chloroethyl) phosphate (TCEP), sulfamethazine (SMZ), carbamazepine (CBZ), fluoxetine (FLX), benzotriazole (BTA), sulfamethoxazole (SMX), and metformin (METF). Biodegradable CECs (SMX, SMZ, ACT, IBU, TCS, BPA, CAF, DEET, and TMP) were efficiently removed (83-100%) by the WSP. In contrast, recalcitrant CECs achieved poor removal efficiencies (e.g., FLX at 24%), and for others, treatment processes even resulted in elevated concentrations in the effluent (CBZ by 85%, TCEP by 149%, and BTA by 92%). The CECs' influent concentrations were determined to pose a moderate aquatic cumulative risk, while no such risk was associated with their effluent concentrations. The study demonstrates the importance of conventional WWTPs in reducing the concentrations of CECs to minimize their aquatic contamination risk. The findings are relevant for countries, such as Indonesia, with limited resources for advanced centralized wastewater treatments, and which are exploring the efficacy of centralized WSP against the existing decentralized treatments.

Robust fractional control based on high gain observers design (RNFC) for a Spirulina maxima culture interfaced with an advanced oxidation process

In this article, the theory of fractional control and state estimation applied to biological science is studied, particularly in hybrid wastewater treatment. For nonlinear systems with stable and known states, an interconnected fractional robust control design with high gain state estimation is proposed to generate a control insensitive to nutritional perturbations originated by an advanced oxidation process in a microalgae culture. An online study is proposed for the mineralization of glyphosate and its feedback in a microalgae cultivation process where through the designed control the light dynamics is manipulated to robustly and automatically regulate the biomass signal provided by an analog sensor and nutrient estimation via state observers. In the literature, there are few results developed with real-time results. This work is a multidisciplinary study with online results where the performance and improvement of the proposed complex process are concluded.

Innovative progress in graphene derivative-based composite hybrid membranes for the removal of contaminants in wastewater: A review

Graphene derivatives (graphene oxide) are proved as an innovative carbon materials that are getting more attraction in membrane separation technology because of its unique properties and capability to attain layer-to-layer stacking, existence of high oxygen-based functional groups, and generation of nanochannels that successively enhance the selective pollutants removal performance. The review focused on the recent innovations in the development of graphene derivative-based composite hybrid membranes (GDHMs) for the removal of multiple contaminants from wastewater treatment. To design GDHMs, it was observed that at first GO layers undergo chemical treatments with either different polymers, plasma, or sulfonyl. After that, the chemically treated GO layers were decorated with various active functional materials (either with nanoparticles, magnetite, or nanorods, etc.). By preparing GDHMs, properties such as permeability, porosity, hydrophilicity, water flux, stability, feasibility, mechanical strength, regeneration ability, and antifouling tendency were excessively improved as compared to pristine GO membranes. Different types of novel GDHMs were able to remove toxic dyes (77-100%), heavy metals/ions (66-100%), phenols (40-100%), and pharmaceuticals (74-100%) from wastewater with high efficiency. Some of GDHMs were capable to show dual contaminant removal efficacy and antibacterial activity. In this study, it was observed that the most involved mechanisms for pollutants removal are size exclusion, transport, electrostatic interactions, adsorption, and donnan exclusion. In addition to this, interaction mechanism during membrane separation technology has also been elaborated by density functional theory. At last, in this review the discussion related to challenges, limitations, and future outlook for the applications of GDHMs has also been provided.

Modelling and parameter optimisation for performance evaluation of sequencing batch reactor for treating hospital wastewater

Hospital wastewater treatment is gaining attention in recent studies due to its complex nature. The performance of the sequencing batch reactor coupled with tube-settler was investigated for hospital wastewater treatment. The performance was evaluated regarding removing organic matter and nutrients (nitrate and phosphate). The phosphate was removed in the sequencing batch reactor and its associated tube-settler with a 60% removal efficiency margin. Nitrification was observed in sequencing batch reactor and tube-settler, but denitrification could not be achieved. The nitrification-denitrification process was not completed during the process. The current work's main aim was to understand and optimise the operational parameters involved in the performance of the sequencing batch reactor. The operational parameters were optimised using Design expert software, and Response Surface Methodology involved a four-factor and five-level central composite design. The percentage removal of chemical oxygen demand, nitrate, and phosphate was selected to be observed during this study.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13399-022-03406-z.

The prochloraz chronic exposure to Daphnia magna derived in biochemical alterations of F0 generation daphnids and malformed F1 progeny

In the present study, D. magna individuals were exposed to several sublethal prochloraz concentrations (87, 130, 170, 230 and 380 μg/L) for 21 days according to; the previous acute toxicity results. The fungicide effects on reproduction, survival, individual size, and growth population rate were evaluated after an exposure of 21 days, and no changes were observed compared to the control group. On the other hand, F1 generation neonates were collected and their external morphology evaluated; to estimate if the fungicide concentrations used induced effects during oogenesis and; embryogenesis processes. Neonates from parents which were previously exposed to 170 μg/L and higher concentrations were malformed since 16-d of exposure onward. All animals presented the same malformation: asymmetrical shell morphology and separated valves that did not cover the complete animal body regardless of the; concentration. The biochemical parameters tested in the broodstock were cholesterol, triglycerides, glucose and LDH activity. At the end of the chronic exposure experiment, cholesterol and triglycerides remained unaltered while glucose and the LDH enzyme levels increased significantly. The results of the present work showed a direct effect of; prochloraz on D. magna individual growth, along with mobilization of some; biochemical intermediate metabolism. A daphnid stress response as a result of the fungicide presence in the medium could be an explanation for the metabolic disorders. On the other hand, the F1 malformed neonates found in the present study suggested an effect of prochloraz among different daphnid generations and more studies would be necessary in this field.

Current Challenges for Biological Treatment of Pharmaceutical-Based Contaminants with Oxidoreductase Enzymes: Immobilization Processes, Real Aqueous Matrices and Hybrid Techniques

The worldwide access to pharmaceuticals and their continuous release into the environment have raised a serious global concern. Pharmaceuticals remain active even at low concentrations, therefore their occurrence in waterbodies may lead to successive deterioration of water quality with adverse impacts on the ecosystem and human health. To address this challenge, there is currently an evolving trend toward the search for effective methods to ensure efficient purification of both drinking water and wastewater. Biocatalytic transformation of pharmaceuticals using oxidoreductase enzymes, such as peroxidase and laccase, is a promising environmentally friendly solution for water treatment, where fungal species have been used as preferred producers due to their ligninolytic enzymatic systems. Enzyme-catalyzed degradation can transform micropollutants into more bioavailable or even innocuous products. Enzyme immobilization on a carrier generally increases its stability and catalytic performance, allowing its reuse, being a promising approach to ensure applicability to an industrial scale process. Moreover, coupling biocatalytic processes to other treatment technologies have been revealed to be an effective approach to achieve the complete removal of pharmaceuticals. This review updates the state-of-the-art of the application of oxidoreductases enzymes, namely laccase, to degrade pharmaceuticals from spiked water and real wastewater. Moreover, the advances concerning the techniques used for enzyme immobilization, the operation in bioreactors, the use of redox mediators, the application of hybrid techniques, as well as the discussion of transformation mechanisms and ending toxicity, are addressed.

Performance evaluation of ceramic membrane bioreactor: effect of operational parameters on micropollutant removal and membrane fouling

This paper presents the removal of nine potential endocrine disruptors including pesticides, pharmaceuticals and industrial chemicals using a submerged membrane bioreactor (MBR) system. Two lab-scale submerged MBRs having ceramic membranes were operated at three different sludge retention times (SRT: 15, 45, 90 days) and two hydraulic retention times (HRT: 12, 6 h) and the effects of SRT and HRT on both micropollutant removal and membrane fouling were investigated. While the effect of SRT and HRT change was observed on the removal of atrazine, fluoxetine, penconazole, no significant change was detected for the other micropollutants studied. It was determined that physicochemical properties such as distribution coefficient (LogD) and hydrophobicity of micropollutants are also effective on the removal efficiency of micropollutants. High removal efficiencies ([Formula: see text] 97.5%) were observed for hydrophobic pollutants (logD > 3.2) except for penconazole (72.1%) and for hydrophilic pollutants (logD < 3.2) except for atrazine (42.5%). Membrane fouling was significantly affected by different operational parameters applied, with the slowest fouling occurring at 45 days of SRT and 12 h of HRT. However, micropollutant addition did not have a significant effect on membrane fouling. It has been shown that the simultaneous and effective treatment performance for micropollutants makes the membrane bioreactor system a promising wastewater treatment process.

Octocrylene: From Sunscreens to the Degradation Pathway during Chlorination Processes: Formation of Byproducts and Their Ecotoxicity Assessment

Octocrylene is an organic sunscreen whose main action is to absorb UVB radiation and short UVA wavelengths; it is used in various cosmetic products in order to provide an adequate sun-protection factor or to protect the cosmetic formulations themselves from UV radiation. This filter is believed to be a possible endocrine disruptor and is also questioned due to its allergic and/or photoallergic potential. However, it continues to be widely used, and it has been found in various environments, not least those of swimming pools, where it is evidently released by consumers, to the point that it is now considered an emerging micropollutant. The present investigation presents the possible chemical fate of octocrylene in the typical chlorination conditions of wastewater or swimming pools. A total of 11 disinfection byproducts were identified, and 6 were identified for the first time, and separated by HPLC. These products were identified through careful mass spectrometry studies and 1D and 2D NMR experiments. A formation mechanism has been proposed that justifies the chemical structures of all of the compounds identified. The ecotoxicological assessment of octocrylene and their products was carried out by employing Phaeodactylum tricornutum, Brachionus plicatilis and Aliivibrio fischeri as bioindicators. The ecotoxicity results reveal that toxic byproducts might be generated during the oxidation process, increasing the potential risk to the marine environment.

Enhanced degradation of amiloride over Bi2FeNbO7/bisulfite process: Key factors and mechanism

Construction of Bi₂FeNbO₇/bisulfite system for abatement of pharmaceutical residue was achieved. An attempt to synthesize Bi₂FeNbO₇ through hydrothermal technique was confirmed by X-ray diffraction. The magnetic field experiment revealed that Bi₂FeNbO₇ possessed a saturation magnetization of 6.99 emu/g, indicating magnetic attributes of Bi₂FeNbO₇. Scanning electron microscopy images showed that Bi₂FeNbO₇ exhibited regular octahedra in the size of 200-300 nm. In a self-made device, the activation of sodium bisulfite using Bi₂FeNbO₇ for the disposal of amiloride has been carefully explored. The effects of solution pH, sodium bisulfite concentration, Bi₂FeNbO₇ dosage, amiloride concentration, coexisting ions, and water matrix on the performance of Bi₂FeNbO₇/bisulfite system was investigated. The catalytic performance of Bi₂FeNbO₇/bisulfite to degrade amiloride was considerably higher than that of traditional iron oxides. The maximum removal efficiency of amiloride was 97.9% in Bi₂FeNbO₇/bisulfite process. The involvement of Fe might be crucial for activating bisulfite to create active species. The dominating radical in Bi₂FeNbO₇/bisulfite process was identified as SO₃^•‒. With the help of UHPLC/MS/MS, three new degradation products of amiloride were found. Dehalogenation and deamination of amiloride might account for the formation of these transformation products. This work provides a highly efficient Bi₂FeNbO₇/bisulfite process for the disposal of pharmaceutical pollutants in water treatment.

Sustainable Treatment Techniques for Emerging Pollutants—The Case of Personal Hygiene Products

Personal care products (PCPs) enter wastewater primarily through greywater. Treatment plants have not been able to remove this type of contaminant, although PCP abatement techniques have been developed in recent years. The objective of the current study has been to encounter the sustainable technique that keeps the optimal balance between the criteria considered in the comparison. Therefore, a bibliographic review was conducted in scientific databases of the last eight years, demonstrating that co-composting, anaerobic–aerobic sequencing bioreactors and contaminant absorption through the use of carbon nanotubes are the ones with the least environmental impact. Subsequently, the Saaty and Modified Saaty methods were applied, with a comparative criteria of construction costs, maintenance costs, efficiency and the stage of development. The results indicated that the co-composting technique is the best sustainable technique of those studied, with a score of 0.86/1, which means that the criteria analyzed maintain very close values between them. The co-composting technique yields a low environmental impact in eliminating personal care products. This research work constitutes a practical and easy-to-use tool for decision makers, since it allows finding an optimal elimination treatment for PCPs.

From the pills to environment - Prediction and tracking of non-steroidal anti-inflammatory drug concentrations in wastewater

The extend of environment pollution by pharmaceuticals is in a stage that required more automatic and integrated solutions. The non-steroidal anti-inflammatory drugs (NSAIDs) are one of the most popular pharmaceutical in the world and emerging pollutants of natural waters. The aim of the paper was to check the correlation of the sales data of selected NSAIDs (ibuprofen, naproxen, diclofenac) and their concentration in the WWTP in order to enable predicting their loads, having only the sales data. For calculations, we apply three discharge scenarios (the fates between purchased to the presence in influents), having in mind that some part of sold mass can be improperly dispose to sewage system. To support predictions, chemical analysis was conducted in two conventional wastewater treatment plants (WWTPs) located in Poland during 2018 and 2020, thereby before and during pandemic situation. The NSAIDs concentration in the influent was higher than that which would be obtained if all of the administrated mass of the pharmaceutical went through the metabolic pathway of transformation. This means that substantial mass of sold NSAIDs in improperly dispose to sewage system, and this factor need to be taken into account in future predictions. Furthermore, results indicate that the variance of naproxen and diclofenac concentrations in the influent has no correlation with relatively stable sales throughout whole year. The pandemic situation had yet no direct effect to diclofenac concentrations in influents, despite observed increasing of sales. It was calculated that more than 60 kg of diclofenac was discharged into the Baltic Sea in 2018, and 20 kg in the first half of 2021 from two tested WWTPs. The presence of 4OH-diclofenac in effluents often in higher concentration compared to diclofenac mean that this still biologically active compound need to be taken into account in future risk assessment.

Surgical face masks as a source of emergent pollutants in aquatic systems: Analysis of their degradation product effects in Danio rerio through RNA-Seq

Surgical face masks are the most popularised and effective personal equipment for protecting public health during the COVID-19 pandemic. They are composed of plastic polymer fibres with a large amount of inorganic and organic compounds that can be released into aquatic environments through degradation processes. This source of microplastics and inorganic and organic substances could potentially impact aquatic organisms. In this study, the toxicogenomic effects of face masks at different stages of degradation in water were analysed in zebrafish larvae (Danio rerio) through RNA-Seq. Larvae were exposed for 10 days to three treatments: 1) face mask fragments in an initial stage of degradation (poorly degraded masks -PDM- products) with the corresponding water; 2) face mask fragments in an advanced stage of degradation (highly degraded masks -HDM- products) with the corresponding water; and 3) water derived from HDM (W-HDM). Transcriptome analyses revealed that the three treatments provoked the down-regulation of genes related to reproduction, especially the HDM products, suggesting that degradation products derived from face masks could act as endocrine disruptors. The affected genes are involved in different steps of reproduction, including gametogenesis, sperm-egg recognition and binding or fertilisation. Immune-related genes and metabolic processes were also differentially affected by the treatments.

Monitoring Human Viral Pathogens Reveals Potential Hazard for Treated Wastewater Discharge or Reuse

Wastewater discharge to the environment or its reuse after sanitization poses a concern for public health given the risk of transmission of human viral diseases. However, estimating the viral infectivity along the wastewater cycle presents technical challenges and still remains underexplored. Recently, human-associated crAssphage has been investigated to serve as viral pathogen indicator to monitor fecal impacted water bodies, even though its assessment as biomarker for infectious enteric viruses has not been explored yet. To this end, the occurrence of potentially infectious norovirus genogroup I (GI), norovirus GII, hepatitis A virus (HAV), rotavirus A (RV), and human astrovirus (HAstV) along with crAssphage was investigated in influent and effluent water sampled in four wastewater treatment plants (WWTPs) over 1 year by a PMAxx-based capsid integrity RT-qPCR assay. Moreover, influent and effluent samples of a selected WWTP were additionally assayed by an in situ capture RT-qPCR assay (ISC-RT-qPCR) as estimate for viral infectivity in alternative to PMAxx-RT-qPCR. Overall, our results showed lower viral occurrence and concentration assessed by ISC-RT-qPCR than PMAxx-RT-qPCR. Occurrence of potentially infectious enteric virus was estimated by PMAxx-RT-qPCR as 88–94% in influent and 46–67% in effluent wastewaters with mean titers ranging from 4.77 to 5.89, and from 3.86 to 4.97 log₁₀ GC/L, with the exception of HAV that was sporadically detected. All samples tested positive for crAssphage at concentration ranging from 7.41 to 9.99 log₁₀ GC/L in influent and from 4.56 to 6.96 log₁₀ GC/L in effluent wastewater, showing higher mean concentration than targeted enteric viruses. Data obtained by PMAxx-RT-qPCR showed that crAssphage strongly correlated with norovirus GII (ρ = 0.67, p < 0.05) and weakly with HAstV and RV (ρ = 0.25–0.30, p < 0.05) in influent samples. In effluent wastewater, weak (ρ = 0.27–0.38, p < 0.05) to moderate (ρ = 0.47–0.48, p < 0.05) correlations between crAssphage and targeted viruses were observed. Overall, these results corroborate crAssphage as an indicator for fecal contamination in wastewater but a poor marker for either viral occurrence and viral integrity/infectivity. Despite the viral load reductions detected in effluent compared to influent wastewaters, the estimates of viral infectivity based on viability molecular methods might pose a concern for (re)-using of treated water.

When pharmaceutical drugs become environmental pollutants: Potential neural effects and underlying mechanisms

Pharmaceutical drugs have become consumer products, with a daily use for some of them. The volume of production and consumption of drugs is such that they have become environmental pollutants. Their transfer to wastewater through urine, feces or rinsing in case of skin use, associated with partial elimination by wastewater treatment plants generalize pollution in the hydrosphere, including drinking water, sediments, soils, the food chain and plants. Here, we review the potential effects of environmental exposure to three classes of pharmaceutical drugs, i.e. antibiotics, antidepressants and non-steroidal anti-inflammatory drugs, on neurodevelopment. Experimental studies analyzing their underlying modes of action including those related to endocrine disruption, and molecular mechanisms including epigenetic modifications are presented. In addition, the contribution of brain imaging to the assessment of adverse effects of these three classes of pharmaceuticals is approached.

Assessment of the occurrence of 455 pharmaceutical compounds in sludge according to their physical and chemical properties: A review

Sludge agronomical reuse is of major interest due to the beneficial contribution of nutrients. However, it implies the introduction of unregulated pharmaceuticals into amended-soils and creates a controversial issue about sludge management. To limit their dissemination, it is essential to identify the compounds of interest and understand their attenuation mechanisms through the sludge processes. This paper summarizes the knowledge on 455 investigated pharmaceuticals among 32 therapeutical categories in amendable sludge matrices. It contributes to enlarging the list of commonly quantified compounds to 305 residues including 84 additional compounds compared to previous reviews. It highlights that sorption appears as the main mechanism controlling the occurrence of pharmaceuticals in sludge matrices and shows the considerable residual levels of pharmaceuticals reaching several mg/kg in dry weight. Antibiotics, stimulants, and antidepressants show the highest concentrations up to 232 mg/kg, while diuretics, anti-anxieties or anticoagulants present the lowest concentrations reaching up to 686 µg/kg. Collected data show the increase in investigated compounds as antifungals or antihistamines, and underline emerging categories like antidiabetics, antivirals, or antiarrhythmics. The in-depth analysis of the substantial database guides onto the pharmaceuticals that are the most likely to occur in these amendable matrices to assist future research.

Laccases—Versatile Enzymes Used to Reduce Environmental Pollution

The accumulation of waste and toxic compounds has become increasingly harmful to the environment and human health. In this context, the use of laccases has become a focus of interest, due to the properties of these versatile enzymes: low substrate specificity, and water formation as a non-toxic end product. Thus, we begin our study with a general overview of the importance of laccase for the environment and industry, starting with the sources of laccases (plant, bacterial and fungal laccases), the structure and mechanism of laccases, microbial biosynthesis, and the immobilization of laccases. Then, we continue with an overview of agro-waste treatment by laccases wherein we observe the importance of laccases for the biodisponibilization of substrates and the biodegradation of agro-industrial byproducts; we then show some aspects regarding the degradation of xenobiotic compounds, dyes, and pharmaceutical products. The objective of this research is to emphasize and fully investigate the effects of laccase action on the decomposition of lignocellulosic materials and on the removal of harmful compounds from soil and water, in order to provide a sustainable solution to reducing environmental pollution.

Pharmaceuticals as emerging pollutants: Case naproxen an overview

Nonsteroidal anti-inflammatory drugs (NSAIDs), including naproxen (NP), diclofenac, ibuprofen, etc., are widely used for fever and pain relief. NP is one of the most widely consumed drugs in the world, because it is available over the counter in many countries. Many studies have proven that NP is not eliminated in conventional water treatment processes and its biodegradation in the environment is also difficult compared to other drugs. Along these lines, we are aware that both the original compound and its metabolites can be found in different destinations in the environment. To assess the environmental exposure and the risks associated with NP, it is important to understand better the environment where they finally reach, the behavior of its original compounds, its metabolites, and its transformation products. In this sense, the purpose of this review is to summarize the current state of knowledge about the introduction and behavior of NP in the environments they reach and highlight research needs and gaps. Likewise, we present the sources, environmental destinations, toxicology, environmental effects, and quantification methodologies.

Emerging Pollutants in Moroccan Wastewater: Occurrence, Impact, and Removal Technologies

The rapid growth of anthropogenic activities in recent decades has resulted in the appearance of numerous new chemical compounds in the environment, known as “emerging pollutants” (EPs) or “contaminants of emerging concern” (CECs). Although partially or not yet regulated or monitored, there is growing research interest in these EPs among the scientific community because of their bioaccumulation, persistence, and adverse effects. Among these, endocrine disruptors, pesticides, and pharmaceuticals can have harmful impacts on human health and the ecosystem. Conventional wastewater treatment technologies are not effective in removing these contaminants, allowing them to be released into the receiving environment. In order to improve the understanding of emerging pollutants, this review discusses the source, occurrence, and impacts of bisphenol A, atrazine, amoxicillin, and paracetamol as model molecules of emerging environmental pollutants, an issue that remains underrepresented in Morocco. Then, treatment methods for EPs are reviewed, including adsorption, advanced oxidation processes, biodegradation, and hybrid treatment. It is proposed that adsorption and photocatalysis can be used as simple, effective, and environmentally friendly technologies for their removal. Thus, we summarize some of the adsorbent and photocatalyst materials applied in recent work to control these pollutants. Towards the end of this paper, the development of inexpensive and locally available (Morocco) materials to remove these compounds from wastewater is considered.

Removal of emerging contaminants (bisphenol A and antibiotics) from kitchen wastewater by alkali-modified biochar

Using current wastewater treatment technologies, it can be challenging to remove the emerging contaminants (ECs) present in kitchen wastewater (KW) of complex compositions and high organic content. In this study, biochar, derived from straw, was modified as an adsorbent to remove ECs such as bisphenol A (BPA), tetracycline (TC) and ofloxacin (OFL) from a complex KW system. An alkali-modified biochar, having larger specific surface areas and stronger hydrophobicity, was found to exhibit a higher adsorption capacity, with more than 95% of the target ECs being removed. Indeed, in a static operation mode, the alkali-modified biochar had maximum adsorption capacities of 71.43, 101.01 and 54.05 mg/g for BPA, TC, and OFL, respectively. The adsorption kinetics and isotherms models indicated that the adsorption process was controlled by chemisorption, as well as the monolayer adsorption of contaminants onto the external and internal surfaces of the alkali-modified biochar. The adsorption of TC and OFL was significantly affected by the initial pH values of KW. However, the presence of different environmental factors (COD, NH₄⁺ and PO₄^3-) had little effects on the adsorption of the contaminants. The alkali-modified biochar was further tested in a fixed-bed column where the maximum dynamic adsorption capacities for BPA and OFL were 55 and 45 mg/g, representing about 75% and 83% of the static saturated adsorption capacities. These findings can be of major significance for the application of alkali-modified biochar in the removal of ECs from complex KW systems.

Performance Efficiency of Conventional Treatment Plants and Constructed Wetlands towards Reduction of Antibiotic Resistance

Domestic and industrial wastewater discharges harbor rich bacterial communities, including both pathogenic and commensal organisms that are antibiotic-resistant (AR). AR pathogens pose a potential threat to human and animal health. In wastewater treatment plants (WWTP), bacteria encounter environments suitable for horizontal gene transfer, providing an opportunity for bacterial cells to acquire new antibiotic-resistant genes. With many entry points to environmental components, especially water and soil, WWTPs are considered a critical control point for antibiotic resistance. The primary and secondary units of conventional WWTPs are not designed for the reduction of resistant microbes. Constructed wetlands (CWs) are viable wastewater treatment options with the potential for mitigating AR bacteria, their genes, pathogens, and general pollutants. Encouraging performance for the removal of AR (2-4 logs) has highlighted the applicability of CW on fields. Their low cost of construction, operation and maintenance makes them well suited for applications across the globe, especially in developing and low-income countries. The present review highlights a better understanding of the performance efficiency of conventional treatment plants and CWs for the elimination/reduction of AR from wastewater. They are viable alternatives that can be used for secondary/tertiary treatment or effluent polishing in combination with WWTP or in a decentralized manner.

An innovative biofilter technology for reducing environmental spreading of emerging pollutants and odour emissions during municipal sewage treatment

Wastewater treatment plants (WWTPs) are known sources of contaminants of emerging concern (CECs) spreading into the environment, as well as, of unpleasant odors. CECs represent a potential hazard for human health and the environment being pharmaceutical or biologically active compounds and they are acquiring relevance in European directives. Similarly, the public concern about odour emissions from WWTPs is also increasing due to the decreasing distance between WWTP and residential areas. This study focuses on the effectiveness of the recently developed MULESL technology (MUch LEss SLudge; WO2019097463) in removing CECs and limiting odour emissions from WWTPs. MULESL technology has been developed for its ability to reduce up to 80% the sludge production from WWTPs. However, it is ought to evaluate if the benefits coming from sludge production reduction do not invalidate CECs removal or negatively affect odour emissions. Thus, the performances of a MULESL and a conventional WWTP (flow rate of 375 m³/d and 3600 m³/d, respectively) were compared while treating the same municipal sewage. Whereas both plants succeeded in removing the traditional gross parameters characterizing wastewaters (e.g. chemical oxygen demand, nitrogen), the MULESL was much more effective than the conventional one in terms of CECs removal for about 60% of the identified compounds showing, however, the same or lower effectiveness for about 30% and 10% of them, respectively. This result was attributed to the high sludge retention time and biomass concentration in the MULESL (enabling enrichment of slow growing microorganisms and forcing biomass to use unusual substrates, respectively), and to the biomass feature to grow in the form of biofilm and granules (favoring micropollutants absorption on biomass). Furthermore, odour impact analysis has shown that the MULESL was characterized by a much lower impact, i.e. 45% lower than that of primary and secondary treatments of the conventional WWTP.

The Biological Effects of Pharmaceuticals in the Marine Environment

Environmental pharmaceuticals represent a threat of emerging concern for marine ecosystems. Widely distributed and bioaccumulated, these contaminants could provoke adverse effects on aquatic organisms through modes of action like those reported for target species. In contrast to pharmacological uses, organisms in field conditions are exposed to complex mixtures of compounds with similar, different, or even opposing therapeutic effects. This review summarizes current knowledge of the main cellular pathways modulated by the most common classes of environmental pharmaceuticals occurring in marine ecosystems and accumulated by nontarget species-including nonsteroidal anti-inflammatory drugs, psychiatric drugs, cardiovascular and lipid regulator agents, steroidal hormones, and antibiotics-and describes an intricate network of possible interactions with both synergistic and antagonistic effects on the same cellular targets and metabolic pathways. This complexity reveals the intrinsic limits of the single-chemical approach to predict the long-term consequences and future impact of pharmaceuticals at organismal, population, and community levels.

Indirect effects of Covid-19 on water quality

The provision of safe water and functioning waste management play key roles in preventing and combatting disease outbreaks such as the Covid-19 pandemic. Good water quality is needed for effective hygiene measures like washing hands as well as for lowering pathogen transmission. Almost all over the world, especially in developing countries, water is vulnerable and at high risk and surging insecurity with time. Effective water management, sanitation, and hygiene help to protect lives during the global COVID-19 pandemic. While sanitation and hygiene also disturb the quality and increase water consumption per capita to 40% comparatively and wastewater production in many developing countries. This rapid increase in water consumption puts direct pressure on water reservoirs and inadequate management of wastewater is also a serious threat to waterways, nowadays. Similarly, the quality of water bodies is significantly affected by the COVID-19 pandemic, but the risk of transmission of COVID-19 through sewerage systems is recorded as low. Hence, the current review paper aims to highlight the main concerns directly linked with the frequent usage of detergents/soaps and alcohol-based hand sanitizers on water quality and the post-pandemic handwashing habits to overcome the COVID-19 spread also threatening the water reserve reservoirs via water high consumption along with more wastewater production with less water reuse efficiency and collectively the pressure on drinking water facilities. This review also focuses on the indirect influence of COVID-19 on water quality through technical interventions among COVID-19, water pollution; soaps/detergents, and hand sanitizer and the complete water management plan for water security and safety from policymakers to end users after the viral revolution briefly.