Effects of spatial and seasonal factors on the characteristics and carbonyl index of (micro)plastics in a sandy beach in Aveiro, Portugal

Spectral analysis of environmental microplastic polyethylene (PE) using average spectra

In this study, microplastic samples from surface seawater of Tokyo Bay were collected, polyethylene (PE) microplastics were used to calculate carbonyl index (CI), and average spectra of PE were analyzed and compared with a previous study applying agitation during chemical treatment. It was found that PE and polypropylene (PP) were the predominant polymer type in the samples. Among PE samples, fragments were the most commonly observed shape, with white being the dominant color. Deviations were found in the average spectra among different shapes and colors when compared to the standard PE spectrum. A comparison of the average spectra between the two datasets suggests that pronounced peaks related to oxidation are most likely resulted from agitation during the chemical treatment. Additionally, it was found a closer spectral resemblance between the sample spectra and the spectrum of standard sample of oxidized PE (PEOx) than with the standard PE spectrum, suggesting that using the oxidized PE as a reference spectrum might be more effective for identification. These findings highlight the complex factors affecting the spectral properties of microplastics and highlight the importance of understanding these variations to enhance the accuracy of microplastic identification workflows and understanding of environmental fate of microplastics.

The Effects of Rainfall Events on the Composition and Diversity of Microplastics on Beaches in Xiamen City on a Short-Term Scale

Coastal beaches are vulnerable to microplastic pollution originating primarily from terrestrial and marine sources or the in situ weathering of plastic waste. The present study investigates the effects of rainfall events on the composition and diversity of microplastics on beaches in Xiamen City on a short-term scale. In the results, the quantity of microplastics in beach sediments was 245.83 ± 11.61 items·kg-1 (mean ± standard error). The abundance of microplastics did not differ after each rainfall event but significantly decreased after multiple rainfall events. When the diversity of microplastics in the coastal area was evaluated, the Shannon-Wiener index and Pielou's index also decreased from 3.12 and 0.64 to 2.99 and 0.62, respectively, after multiple rainfall events. Rainfall had varying effects on microplastics depending on their size and shape, with particles smaller than 500 μm experiencing pronounced reductions. There was a significant negative correlation between the abundance of microplastics and the grain size of sand, but a positive correlation with sediment moisture content. We encourage the consideration of the potential impact of rainfall events during sample collection to ensure the reliability of the data. We also recommend using diversity indexes to help in understanding the influence of physical processes on microplastic distribution and their mechanisms.

Variation of Young's modulus suggested the main active sites for four different aging plastics at an early age time

Precisely determining which bonds are more sensitive when plastic aging occurs is critical to better understand the mechanisms of toxic release and microplastics formation. However, the relationship between chemical bonds with the active aging sites changes and the aging behavior of plastics at an early age is still unclear. Herein, the mechanical behavior of four polymers with different substituents was characterized by the high-resolution AFM. Young's modulus (YM) changes suggested that the cleavage of C-Cl bonds in PVC, C-H bonds in PE and PP, and C-F bonds in PTFE are the main active aging sites for plastic aging. The aging degree of the plastics followed the order of PVC > PP > PE > PTFE. Two aging periods exhibited different YM change behavior, the free radical and cross-linking resulted in a minor increase in YM during the initiation period. Numerous free radicals formed and cross-linking reaction happened, causing a significant increase in YM during the propagation period. Raman spectroscopy verified the formation of microplastics. This research develops promising strategies to quantitatively evaluate the aging degrees using AFM and establish the relationship between chemical bonds and mechanical behavior, which would provide new method to predict plastic pollution in actual environments.

Biomonitoring of microplastics, anthropogenic microfibres and glass retroreflective beads by marine macroalgae

Microplastics and other microscopic debris are a concern in the coastal environment but measurements in the water column and sediment are often problematic and rely on non-standardised and highly variable methodologies. To this end, we explore the potential of different species of temperate-cold marine macroalgae as passive biomonitors of anthropogenic microparticles at three contrasting locations in southwest England. Specifically, fronds from samples of fucoids and Ulva lactuca (n = 9 in total, and three from each location) have been sectioned and analysed directly under a microscope and anthropogenic microparticles counted and subsequently characterised for chemical composition. Microparticles were heterogeneously distributed throughout sections from the same sample. However, on a dry weight basis, combined microparticle concentrations for each sample ranged from about 7.5 g-1 to 110 g-1, and from about 0.2 cm-2 to 0.9 cm-2, and for a given species were higher in samples from a semi-enclosed harbour and urban beach than in samples from a protected beach facing the open sea. These values compare with published concentrations of microplastics and microfibres reported for the regional water column on the order of 0.1 m-3. Most particles were cellulosic (e.g., rayon) and petroleum-based (mainly polyester and polyethylene terephthalate) fibres but plastic fragments were also present on most samples. Glass retroreflective beads derived from road markings were also present at up to 18 g-1 on fucoids from the urban beach because of its proximity to a stormwater effluent. Most microparticles were adhered to the smooth parts of the macroalgal surface but some displayed wrapping around edges and creases or entrapment by appendages. The practical and environmental implications of macroalgae passively capturing significant quantities of anthropogenic microparticles are discussed.

From pollution to solutions: Insights into the sources, transport and management of plastic debris in pristine and urban rivers

River systems are important recipients of environmental plastic pollution and have become key pathways for the transfer of mismanaged waste from the land to the ocean. Understanding the sources and fate of plastic debris, including plastic litter (>5 mm) and microplastics (MPs) (<5 mm), entering different riverine systems is essential to mitigate the ongoing environmental plastic pollution crisis. We comprehensively investigated the plastic pollution in the catchments of two rivers in the Yangtze River basin: an urban river, the Suzhou section of the Beijing-Hangzhou Grand Canal (SZ); and a pristine rural river, the Jingmen section of the Hanjiang River (JM). The abundance of plastic pollutants in SZ was significantly higher than in JM: 0.430 ± 0.450 items/m3 and 0.003 ± 0.003 items/m3 of plastic litter in the water; 23.47 ± 25.53 n/m3 and 2.78 ± 1.55 n/m3 MPs in the water; and 218.82 ± 77.40 items/kg and 5.30 ± 1.99 items/kg of MPs in the sediment, respectively. Plastic litter and MPs were closely correlated in abundance and polymer composition. Overall, the polymer type, shape and color of MPs were dominant by polypropylene (42.5%), fragment (60.4%) and transparent (40.0%), respectively. Source tracing analysis revealed that packaging, shipping, and wastewater were the primary sources of plastic pollutants. The mantel analysis indicated that socio-economic and geospatial factors play crucial roles in driving the hotspot formation of plastic pollution in river networks. The composition of the MP communities differed significantly between the sediments and the overlying water. The urban riverbed sediments had a more pronounced pollutant 'sink' effect compared with the pristine rivers. These findings suggested that the modification of natural streams during urbanization may influence the transport and fate of plastic pollutants in them. Our results offer pivotal insights into effective preventive measures.

The characteristics and influencing factors of farmland soil microplastic in Hetao Irrigation District, China

Microplastic pollution, a major global concern, has garnered increasing attention in agricultural ecosystem research. China's Hetao Irrigation District, vital for grain production in the Yellow River Basin, lacks sufficient research on microplastic pollution of agricultural soils. This study, based on a detailed background investigation and testing of 47 samples, is the first to elucidate the characteristics and potential influencing factors of microplastics in the Hetao Irrigation District. The abundance of microplastics in the farmland soil ranged from 1810 to 86331 items/kg, with 90% measuring below 180 µm and mainly in film and fragment forms. Predominant polymers were polyethylene (PE, 43.0%) and polyamide (PA, 27.8%). Key pollution influencers were identified as agricultural inputs, with low-density polyethylene (LDPE) being the most extensively used plastic type. The carbonyl index and hydroxyl indices of the detected LDPE microplastics ranged from 0.041 to 0.96 and 0.092 to 1.20, respectively. The study highlights the significance of mulching management and agronomic practices in shaping microplastic characteristics. Potential pollution sources include agricultural inputs, irrigation equipment, domestic waste, and tire wear. Proposed effective strategies include responsible plastic use, robust waste management, and irrigation system upgrades, establishing a foundation for future ecological risk assessments and effective management approaches in the Hetao Irrigation District. ENVIRONMENTAL IMPLICATION: The harmful substances studied in this paper are microplastics, which are widely distributed in the environment and have potential ecological risks. This study is the first to investigate the characteristics of microplastics in farmland soil within the Hetao Irrigation Area, a region that is of critical importance to agricultural production in the Yellow River Basin of China. The study provides comprehensive insights into the factors influencing the characteristics of microplastics and speculates on their sources. These findings offer a novel perspective on the assessment of microplastic contamination in the area and provide valuable recommendations for prevention and control measures.

Effect of Abiotic Treatments on Agricultural Plastic Waste: Efficiency of the Degradation Processes

In this study, four different plastic materials usually used in the agricultural sector (polystyrene film (PS), polyethylene terephthalate film (PET), low-density polyethylene film (LDPE) and linear low-density polyethylene film (LLDPE)) were subjected to different abiotic treatments, including photo-oxidation (ultraviolet and e-beam radiation) and thermochemical treatments, to enhance polymer degradation. The extensive use of these polymers leads to large amounts of plastic waste generation, including small plastic pieces, known as microplastics, which affect the quality of the agricultural environment, including soil fertility and quality. Therefore, polymer degradation strategies are needed to effectively reduce plastic waste to protect the agricultural sector. The degree of polymer degradation was assessed by the use of thermal and spectroscopic analyses, such as TGA and FTIR. In addition, efficiency, cost-benefits, and potential side-effects were also evaluated to propose the optimal degradation strategy to reduce plastic waste from the point of view of efficiency. The results obtained showed that the pre-treatments based on photo-oxidation (ultraviolet B and C and e-beam radiation) were more efficient and had a better cost-benefit for the degradation of the polymers studied in relation to the thermochemical treatments. Specifically, ultraviolet photo-oxidation worked well for PS and PET, requiring low energy and medium times. However, e-beam radiation was recommended for PE (LDPE and LLDPE) degradation, since high energy and long times were needed when ultraviolet energy was applied to this polymer. Furthermore, the overall efficiency of the plastic degradation of pre-treatments should be studied using a multicriteria approach, since FTIR assessments, in some cases, only consider oxidation processes on the plastic surface and do not show the potential integrity changes on the plastic probes.

Microplastic transport and deposition in a beach-dune system (Saunton Sands-Braunton Burrows, southwest England)

Although microplastics (MPs) are ubiquitous contaminants that have been extensively studied in the marine setting, there remain gaps in our understanding of their transport and fate in the coastal zone. In this study, MPs isolated from surface sediments sampled from a large beach-dune complex in southwest England have been quantified and characterised. Concentrations above a detectable size limit of 30 to 50 μm ranged from about 40 to 560 MP kg-1 dry weight but, despite local sources of plastics such as an estuary and seasonal tourism, there were no significant differences in median concentrations between different orthogonal foreshore transects and the dunes or according to zonal location on the beach. The majority of MPs were black and blue fibres of <1 mm in length that were constructed of polymers of density > 1 g cm-3 (e.g., rayon, polyester, acrylic). A significant correlation was found between MP concentration and the proportion of very fine sand (100 to 250 μm) but relationships with other granulometric or compositional markers of sediment (e.g., volume-weighted mean diameter, circularity, calcium content) were not evident. An association of MP concentration with very fine sand was attributed to similar particle depositional characteristics and the entrapment of fibres within small interstitial spaces. Overall, the observations reflect the wavelaid and windlaid deposition of MPs from a diffuse, offshore source, and, despite their role as accumulators of particles from the foreshore, dunes do not appear to act as a landward barrier of MPs.

Potential ecological risk assessment of microplastics in coastal sediments: Their metal accumulation and interaction with sedimentary metal concentration

Metal pollution in sediments has long been recognized, while sediments are also a long-term sink for microplastics (MPs). MPs may also adsorb environmental pollutants, including metals, as well as leaching polymer components and chemicals used during production. A comprehensive survey of 21 locations around Qatari coastline investigated abundance of MPs in high-shore intertidal sediments and concentration of metals both on MPs and sediment particles. MPs abundance ranged from 3 to 156 MPs particles·kg-1 (12-624 MPs particles·m-2) with polyethylene being the most abundant (27.4 %). MPs showed physical morphologies, with 76 % displayed signs of chemical degradation as confirmed by the carbonyl absorption peak profile, possibly due to exposure to harsh environmental conditions on the Arabian Gulf shores. Most metals analyzed were found at higher concentrations in sediments than the same metals adsorbed to MPs. The average metal concentration ranged from 0.26 (Cd) to 3122.62 μg∙g-1 (Sr) in sediments while 0.22 (Mo) to 30.26 μg∙g-1 (Sr) in MPs. The calculated metal Pollution Load Index (Sed PLI, range 0.57-2.38) for sediments indicates unpolluted to moderately polluted levels, while the Potential Ecological Risk Index (Sed PERI, range 6.9-2220) indicates a relatively considerable ecological risk for metal pollution in sediments in some of the coastal areas surveyed. PLI values calculated for metals associated with MPs (MPs PLI, range 1.1-7.5), suggests relatively moderate pollution, while the PERI for metals in MPs (MPs PERI, range 25.2-1811) has similar ecological risk in terms of metal pollutants in MPs as for sediments. This may be effective in providing relative spatial indices of pollution load and risk for metals associated with MPs, which could potentially inform establishment of an appropriate assessment framework, where MPs are increasingly abundant in coastal sediments. However, this does not account for the relatively lower abundance of MPs compared to sediments.

The molecular level degradation state of drift plastics in the Sea of Japan coastline

Polyethylene (PE) and polyethylene terephthalate (PET) are among the most abundant plastics polluting the oceans. However, their environmental fate depends on how they have been weathered. Due to its unique geography, the Sea of Japan is a pollution hotspot where plastics accumulate. In this study, the structures of plastics, having drifted into the Sea of Japan coastline environment, were analyzed with a particular focus on examining polymer crystallization and carbonyl formation; two factors which influence microplastic formation and the adsorption of contaminants onto plastic surfaces. PE in the coastal environment did not show evidence of crystallization, although carbonyl formation did increase. By contrast, PET bottles were shown to not be uniform in structure, with unaged bottles being less crystalline in the neck component compared to the body. Because of this difference, in environmental PET bottles, it was the bottle neck that showed increases in crystallization and carbonyl group formation.

Accessing the intrinsic factors of carbonyl index of microplastics: Physical and spectral properties, baseline correction, calculation methods, and their interdependence

Carbonyl index (CI) is a measure of the degradation status of microplastics. While many studies address environmental factors of microplastic degradation, intrinsic factors like physical properties, spectral properties, baseline correction, and CI calculation methods are less explored. This research focused on these aspects using surface seawater samples. We found that color and shape have limited dependence on particle size or signal-to-noise ratio (SNR). Baseline correction can significantly alter CI values, with the direction of the shift depending on the methods used. Additionally, most CI values before and after baseline correction and those calculated using different methods tend to be strongly correlated. Using the selected CI calculation methods, we found that CI values varied significantly by shape and color. CI's relation to the similarity between the sample and its pristine form suggests an alternative degradation measure. Our findings emphasize the need for standardized CI calculation methods.

The distribution and characterisation of microplastics in air, surface water and sediment within a major river system

Rivers are key pathways for the transfer of microplastics (MP) to marine environments. However, there are considerable uncertainties about the amount of microplastics transported by rivers to the ocean; this results in inaccuracies in our understanding of microplastic quantity and transport by freshwater systems. Additionally, it has been suggested that rivers may represent long-term sinks, with microplastics accumulating in sediment due to their high density or other biological, chemical, and physical factors. The atmosphere is also an important pathway by which airborne microplastics may enter aquatic habitats. Here, we compare for first time microplastics type and concentration in these key environmental mediums (air, water and sediment) along a major river (Ganges), from sea to source to understand 1) the abundance, 2) the spatial distribution, and 3) characteristics. Mean microplastic abundance settling from the atmosphere was 41.12 MP m2 day-1; while concentrations in sediment were 57.00 MP kg-1 and in water were 0.05 MP L-1. Across all sites and environmental mediums, rayon (synthetically altered cellulose) was the dominant polymer (54-82 %), followed by acrylic (6-23 %) and polyester (9-17 %). Fibres were the dominant shape (95-99 %) and blue was the most common colour (48-79 %). Across water and sediment environmental mediums, the number of microplastics per sample increased from the source of the Ganges to the sea. Additionally, higher population densities correlated with increased microplastic abundance for air and water samples. We suggest that clothing is likely to be the prominent source of microplastics to the river system, influenced by atmospheric deposition, wastewater and direct input (e.g. handwashing of clothes in the Ganges), especially in high density population areas. However, we suggest that subsequent microplastic release to the marine environment is strongly influenced by polymer type and shape, with a large proportion of denser microplastics settling in sediment prior to the river discharging to the ocean.

Ecotoxicity of micro- and nanoplastics on aquatic algae: Facts, challenges, and future opportunities

The production of plastic has exponentially increased in recent years, leading to the release of millions of tons of plastic waste into the environment annually. This waste can break down into smaller micro- and nanoplastics (MNPs) that are toxic and reactive to life forms, including humans. MNPs are particularly concerning for marine biologists and environmental scientists due to their toxic impacts on aquatic organisms, including algae, which are the foundation of the food chain. The review provides a comprehensive overview of the (eco)toxicity assessment of MNPs on aquatic algal communities, highlighting the novel insights gained into the ecotoxicity of various MNPs on algae and the associated health risks for aquatic ecosystems, food chains, and humans. This article also discusses current challenges and future research opportunities to address these challenges, making it a valuable contribution to the field of environmental science. Overall, this work is one of the first efforts to comprehensively assess the effects of MNPs on aquatic algae, emphasizing the significant risks that MNPs pose to essential ecosystems and human health.

Spatial distribution of anthropogenic particles and microplastics in a meso-tidal lagoon (Arcachon Bay, France): A multi-compartment approach

Assessment of microplastic (MP) contamination is still needed to evaluate this threat correctly and tackle this issue. Here, MP contamination was assessed for a meso-tidal lagoon of the Atlantic coast (Arcachon Bay, France). Sea surface, water column, intertidal sediments and wild oysters were sampled. Five different stations were studied to assess the spatial distribution of the contamination. Two were outside of the bay and three were inside the bay (from the inlet to the back). A distinction was made between all anthropogenic particles (AP, i.e. visually sorted) and MP (i.e. plastic polymer confirmed by ATR-FTIR spectroscopy). The length of particles recovered in this study ranged between 17 μm and 5 mm. Concentration and composition in sea surface and water column samples showed spatial variations while sediment and oyster samples did not. At outside stations, the sea surface and the water column presented a blended composition regarding shapes and polymers and low to high concentrations (e.g. 0.16 ± 0.08 MP.m-3 and 561.7 ± 68.5 MP.m-3, respectively for sea surface and water column), which can be due to coastal processes and nearby input sources. The inlet station displayed a well-marked pattern only at the sea surface. High AP and MP concentrations were recorded, and fragments along with polyethylene overwhelmed (respectively 76.0 % and 73.2 %). Higher surface currents could explain this pattern. At the bay back, AP and MP concentrations were lower and fibers were mainly recorded. Weaker hydrodynamics in this area was suspected to drive this contamination profile. Overall, fragments and buoyant particles were mainly detected at the sea surface while fibers and negatively buoyant particles prevailed in other compartments. Most of the studied samples presented an important contribution of fiber-shaped particles (from 31.5 % to 94.2 %). Finally, contamination was ubiquitous as AP and MP were found at all stations in all sample types.

Spatiotemporal distribution of microplastic debris in the surface beach sediment of the southeastern coast of Bangladesh

This study undertakes a spatiotemporal analysis of microplastic pollution in surface beach sediments, covering 7 coastal beaches in Bangladesh and two seasons-monsoon and winter. The concentration of microplastics extracted from the surface beach sediment is 242.86 particles/kg dw. The results showed both significant seasonal (p value = 0.001) and spatial (p value = 0.004) variation. The abundance and polymer types were significantly higher (57 %) in winter than in the monsoon season (43 %). Touristic and commercial beaches showed higher levels of microplastic pollution than the non-touristic beaches. Polyethylene (28.8 %) and Polypropylene (27.6 %) were the most abundant polymer. The most dominant coloration of microplastics was white (42.6 %). The majority of the microplastics were fibers (33.5 %). Smallest particles measuring <1 mm constituted nearly half of the total microplastics load (48.5 %). This baseline data can be useful in terms of coastal zone management for the southeastern coastal beaches of Bangladesh.

Study of the ageing and the sorption of polyaromatic hydrocarbons as influencing factors on the effects of microplastics on blue mussel

The mussels are species with high socio-economic weights and are often used as bioindicators of biological and chemical contamination. In the field and aquaculture, they can intake microplastics during filter-feeding, and the microplastics can have a negative impact on their health, even at low concentrations. The effects of microplastics have yet to be fully examined on the blue mussel (Mytilus edulis), considering the factors of ageing and sorption of some polyaromatic hydrocarbons (PAHs), ubiquitous environmental contaminants. In this work, 5 different exposure conditions were studied: pristine microplastics, microplastics aged for 1000 days under UV radiation, microplastics sorbing PAHs, as well as microplastics both aged and sorbing PAHs, in parallel to controls. The microplastic changes after ageing were studied with spectroscopic and chromatographic methods. Then, 8-day laboratory exposures of mussels at 10 µg/L of microplastics were performed. The oxidative stress, as well as neurotoxic and immunological responses of M. edulis, were measured using a battery of biomarkers (catalase/CAT, superoxide dismutase/SOD, glutathione S-transferases/GST, acetylcholinesterase/AChE) in 3 different organs (digestive gland, gills and mantle), and acid phosphatase in hemolymph. Then, a study of lipid impairments on the digestive gland was performed through the use of lipidomic tools. No significant difference of oxidative stress activity was observed for all the tissues of mussels exposed to pristine microplastics at 10 µg/L, compared to controls. The ageing and the PAH soption onto microplastics were influencing factors of the oxydative stress in mussels with increased CAT activities in the digestive glands and decreased SOD activities in the mantles. The neurotoxicity was highlighted by higher AChE activities measured in the mantle of mussels exposed to all the microplastic treatments, compared to controls. Concerning lipidomics, no compound was determined as a biomarker of microplastic exposure. The study demonstrated a low toxicity of microplastics at environmental relevant concentration with a 8-day exposure and using the chosen biomarkers. However, some microplastic changes seemed to lead to specific effects on mussels.

Microplastic-sorbed persistent organic pollutants in coastal Mediterranean Sea areas of Tunisia

Microplastics (MPs) are emerging pollutants of global concern due to their pervasiveness, high sorption ability for persistent organic pollutants (POPs) and direct and indirect toxicity to marine organisms, ecosystems, as well as humans. As one of the major coastal interfaces, beaches are considered among the most affected ecosystems by MPs pollution. The morphological characteristics of MPs (pellets and fragments) collected from four beaches along the Tunisian coast and sorbed POPs, including polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs), were investigated in this study. The results showed that the MPs varied greatly in color, polymer composition and degradation degree. The color varied from colored to transparent and the most prevalent polymer identified using Raman spectroscopy was polyethylene. Scanning electron microscope (SEM) images exhibited various surface degradation features including cavities, cracks, attached diatom remains, etc. The concentrations of Σ12PCBs over all beaches ranged from 14 to 632 ng g-1 and 26 to 112 ng g-1 in the pellets and fragments, respectively, with a notable presence and dominance of highly-chlorinated PCBs such as CB-153 and -138. Among the OCPs, γ-HCH is the only compound detected with concentrations ranging from 0.4 to 9.7 ng g-1 and 0.7 to 4.2 ng g-1 in the pellets and fragments, respectively. Our findings indicate that MPs found on the Tunisian coast may pose a chemical risk to marine organisms as the concentrations of PCBs and γ-HCH in most of the analysed samples exceeded the sediment-quality guidelines (SQG), especially the effects range medium (ERM) and the probable effects level (PEL). As the first report of its kind, the information gathered in this study can serve as the baseline and starting point for future monitoring work for Tunisia and neighbouring countries, as well as for stakeholders and coastal managers in decision-making processes.

Abundance, characteristics, and ecological risks of microplastics in the riverbed sediments around Dhaka city

Microplastic (MP) pollution has become an escalating problem in Bangladesh due to its rapid urbanization, economic growth, and excessive use of plastics; however, data on MP pollution from fresh water resources in this country are limited. This study investigated microplastics pollution in riverbed sediments in the peripheral rivers of Dhaka, the capital of Bangladesh. Twenty-eight sediment samples were collected from the selected stations of the Buriganga, Turag, and Balu Rivers. Density separation and wet-peroxidation methods were employed to extract MP particles. Attenuated total reflectance-Fourier transform infrared spectroscopy was used to identify the polymers. The results indicated a medium-level abundance of MPs in riverbed sediment in comparison with the findings of other studies in freshwater sediments worldwide. Film shape, white and transparent color, and large-size (1-5 mm) MPs were dominant in the riverbed sediment. The most abundant polymers were polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET). Pollution load index (PLI) values greater than 1 were observed, indicating that all sampling sites were polluted with MPs. An assessment of ecological risks, using the abundance, polymer types, and toxicity of MPs in the sediment samples, suggested a medium to very high ecological risk of MP pollution of the rivers. The increased abundance of MPs and the presence of highly hazardous polymers, namely; polyurethane, acrylonitrile butadiene styrene, polyvinyl chloride, epoxy resin, and polyphenylene sulfide, were associated with higher ecological risks. Scanning electron microscopy (SEM) analysis indicated that the MPs were subjected to weathering actions, reducing the size of MPs, which caused additional potential ecological hazards in these river ecosystems. This investigation provides baseline information on MP pollution in riverine freshwater ecosystems for further in-depth studies of risk assessment and developing strategies for controlling MP pollution in Bangladesh.

Seasonal and spatial variations in the distribution pattern, sources and impacts of microplastics along different coastal zones of Tamil Nadu, India

We investigated spatiotemporal variations of microplastics (MPs) in Coromandel Coast, Palk Bay, Gulf of Mannar, and West Coast of Tamil Nadu, India. MPs abundance varies from 37 ± 1.52 to 189 ± 9.02 items/kg in sediment and 23 ± 15.25 to 155.25 ± 4.16 items/L in water. Highest abundance in monsoon by riverine inflow transports plastic waste to the ocean. MPs sizes 0.5-1 mm are dominant in summer with 16 polymers, while 3-4 mm dominates the monsoon with 23 polymers. Carbonyl Index shows high MP oxidation (>0.31), unrelated to spatiotemporal changes. SEM-EDAX shows weathered MPs carrying hazardous metals. High MP diversity (MPDII = 0.77) of Coromandel Coast points to many sources of pollution and the need for immediate control measures. Pollution load values indicate low degree of MP pollution (<10), polymer hazard index shows level III (10-100) and IV (100-1000), and ecological risk assessment shows minor risks (<150) at present.

Did the COVID-19 pandemic play a role in the spatial and temporal variations of microplastics? Evidence from a tropical river in southern India

Personal protective equipment (PPE) use has increased because of COVID-19, producing more microplastics (MPs). The pandemic's impact on MP pollution in Indian rivers is little understood. In this study, the Netravathi River in Karnataka was investigated for the spatiotemporal distribution of MPs. The MPs abundance, size, and categories varied seasonally, with a higher concentration during the monsoon seasons. The reduction in rainfall during MON20 and the COVID-19 lockdown can be the reasons for the significant decrease in the MP concentration when compared to MON19. Polyethylene and polyethylene terephthalate were the most abundant polymers, with a shift from polyethylene to the latter (74 %) during post-monsoon season post-lockdown. The situation of MP pollution in Western Ghats can be mitigated with the aid of appropriate waste management of plastic trash and greater public awareness about the disposal of single-use plastics, which has risen significantly during the COVID-19 pandemic.

Comparative evaluation of the carbonyl index of microplastics around the Japan coast

The carbonyl index (CI) of polyethylene and polypropylene microplastics (MPs) (2950 particles) collected in coastal waters around Japan was investigated. The CI of MPs was calculated by the specified area under band technique. The mean MP CI in all samples (regardless of shape and color) was 0.69 ± 0.34 and 0.70 ± 0.34 for polyethylene and polypropylene, respectively, and there was no significant difference in the color or shape of the MPs. The polyethylene, white, and fragment MPs CI was negatively (p < 0.05) correlated with the major length of the MPs. Large MPs with relatively little deterioration were distributed along the west coast of the Sea of Japan, whereas small MPs were distributed along the east coast. Our findings of this gradual change in the deterioration of MPs, based on geographical distribution, are in accordance with literature CI-size and MP degradation hypotheses.

Dissolved organic matter derived from biodegradable microplastic promotes photo-aging of coexisting microplastics and alters microbial metabolism

Dissolved organic matter (DOM) leaching from biodegradable microplastics (BMPs) and its characteristics and corresponding environmental implication are rarely investigated. In this study, the main component of DOM leachate from the two BMPs (polyadipate/butylene terephthalate (PBAT)/polycaprolactone (PCL)) was verified by using excitation-emission matrix-parallel factor analysis (EEM-PARAFAC). The PBAT-DOM (PBOM) was aromatized and terrestrial. Comparatively, PCL-DOM (PLOM) had low molecular weight. PBOM contained protein-like components while PLOM contained tryptophan and tyrosine components. Interestingly, both PBOM and PLOM could accelerate the decomposition and oxidation of coexisting polystyrene (PS) under light irradiation. Further, the difference in composition and the properties of BMPs-DOM significantly affected its photochemical activity. The high territoriality and protein-like component of PBOM significantly promoted the generation of ¹O₂ and O₂^•-, which caused faster disruptions to the backbone of PS. Simultaneously, the microbial community's richness, diversity, and metabolism were obviously improved under the combined pressure of aged PS and BMPs-DOM. This study threw light on the overlooked contribution of DOM derived from BMPs in the aging process of NMPs and their impact on the microbial community and provided a promising strategy for better understanding of combined MPs' fate and environmental risk.

Investigation of the adsorption-desorption behavior of antibiotics by polybutylene succinate and polypropylene aged in different water conditions

Microplastics (MPs) are widely present in aqueous environments and aged by natural components of complex water environments, such as salinity (SI) and dissolved organic matter (DOM). However, the effects of multicondition aging on the physicochemical properties and environmental behavior of MPs have not been completely investigated. In this study, the degradable MP polybutylene succinate (PBS) was used to investigate the environmental behavior of sulfamethoxazole (SMZ) and was compared with polypropylene (PP). The results showed that the single-factor conditions of DOM and SI, particularly DOM, promoted the aging process of MPs more significantly, especially for PBS. The degrees of MP aging under multiple conditions were lower than those under single-factor conditions. Compared with PP, PBS had greater specific surface area, crystallinity, and hydrophilicity and thus a stronger SMZ adsorption capacity. The adsorption behavior of MPs fitted well with the pseudo-second-order kinetic and Freundlich isotherm models, indicating multilayer adsorption. Compared with PP, PBS showed relatively a higher adsorption capacity, for example, for MPs aged under DOM conditions, the adsorption of SMZ by PBS was up to 5.74 mg/g, whereas that for PP was only 3.41 mg/g. The desorption experiments showed that the desorption amount of SMZ on MPs in the simulated intestinal fluid was greater than that in Milli-Q water. In addition, both the original PBS and the aged PBS had stronger desorption capacities than that of PP. The desorption quantity of PBS was 1.23-1.84 times greater than PP, whereas the desorption rates were not significantly different. This experiment provides a theoretical basis for assessing the ecological risks of degradable MPs in complex water conditions.

Fourier Transform Infrared Spectroscopy to Assess the Degree of Alteration of Artificially Aged and Environmentally Weathered Microplastics

Fourier transform infrared (FTIR) is a spectroscopy technique widely used to identify organic materials. It has recently gained popularity in microplastic (MP) pollution research to determine the chemical composition of unknown plastic fragments. However, it could also be used to evaluate the degree of ageing of MPs collected from the environment. In this context, the principal aim of our research has been to qualitatively evaluate the natural weathering of environmental MPs collected in an Italian freshwater body (the Ofanto River) using ATR-FTIR technology. Furthermore, we compared environmental particles to weathered artificial MPs under controlled light and temperature conditions and to unaltered pristine materials to assess the results. FTIR spectra were acquired using a Nicolet Summit FTIR (ThermoFisher Scientific) equipped with an Everest ATR with a diamond Crystal plate and a DTGS KBr detector (wavenumber range 4000-500 cm^-1, 32 scans per spectrum, spectral resolution of 4 cm^-1). The degree of ageing was assessed using three different indexes known to be related to changes in MPs: Carbonyl Index (CI), Hydroxyl Index (HI), and Carbon-Oxygen Index (COI). The overall results showed that the regions reflecting changes (hydroxyl groups, peaks from 3100 to 3700 cm^-1, alkenes or carbon double bonds, 1600 and 1680 cm^-1, and carbonyl groups, 1690 and 1810 cm^-1) appeared significantly modified in artificial and natural weathered particles compared to the pristine materials. The indexes calculated for polymers degraded under the artificial photo and thermo ageing conditions displayed a general tendency to increase with the time in contact with irradiation time. Particular enhancements of CI of PS fragment and PE pellet, HI of PE and PS fragments and PE pellet, and COI of PS fragment were observed. Otherwise, the following incubation of the same particles at a constant temperature of 45 °C did not further affect the chemical composition of the particles. Moreover, new unique peaks were also observed in the freshwater particles, almost all in the fingerprint region (1500-500 cm^-1). Differences in CI, HI, and COI were evidenced among the different morphological MP shapes. On the one hand, the CI calculated for the environmental PE pellets showed values ranging from 0.05 to 0.26 with a mean value of 0.17 ± 0.10. Most samples (57%) presented a CI with values between 0.16 and 0.30. On the other hand, fragments presented slicer modifications in the carbonyl region with CI values lower than pellets (0.05 ± 0.05). This index helps evaluate the degradation of PE MPs by UV light, increasing with enhancing residence time in the environment. Conversely, fragments showed greater values of HI (5.90 ± 2.57) and COI (1.04 ± 0.48) than pellets, as well as lines, which presented the maximum value of HI (11.51). HI is attributed to the bond vibrations of hydroxyl, carboxyl, or phenol groups. In contrast, COI is frequently attributed to the vibrations of C_O bonds found in carbohydrates, alkanes, secondary alcohols, and ketones. In conclusion, our results showed characteristics spectra acquired from environmental particles compared to pristine and artificial aged ones. The interpretation of our main results emphasizes the need to conduct ecotoxicological experimental studies using naturally weathered particles due to the unicity of their properties, which are more helpful for understanding microplastic pollution effects.

Are microplastics contributing to pollution-induced neurotoxicity? A pilot study with wild fish in a real scenario

Pollution-induced neurotoxicity is of high concern. This pilot study investigated the potential relationship between the presence of microplastics (MPs) in the brain of 180 wild fish (Dicentrarchus labrax, Platichthys flesus, Mugil cephalus) from a contaminated estuary and the activity of the acetylcholinesterase (AChE) enzyme. MPs were found in 9 samples (5% of the total), all of them from D. labrax collected in the summer, which represents 45% of the samples of this species collected in that season (20). Seventeen MPs were recovered from brain samples, with sizes ranging from 8 to 96 μm. Polyacrylamide, polyacrylic acid and one biopolymer (zein) were identified by Micro-Raman spectroscopy. Fish with MPs showed lower (p ≤ 0.05) AChE activity than those where MPs were not found. These findings point to the contribution of MPs to the neurotoxicity induced by long-term exposure to pollution, stressing the need of further studies on the topic to increase 'One Health' protection.

Enhanced Adsorption of Bromoform onto Microplastic Polyethylene Terephthalate Exposed to Ozonation and Chlorination

This paper selected microplastic polyethylene terephthalate (PET), commonly found in water/wastewater plant effluent, to investigate the changes of PET oxidized under ozonation (designated as ozonized PET), followed by sodium hypochlorite oxidation (designated as ozonized-chlorinated PET) and studied their influence on the adsorption of the disinfection by-product bromoform (TBM). Fragmentation and cracks appeared on the oxidized PET surface. As the oxidation degree increased, the contact angle decreased from 137° to 128.90° and 128.50°, suggesting hydrophilicity was enhanced. FTIR and XPS analyses suggested that carbonyl groups increased on the surface of ozonized PET and ozonized-chlorinated PET, while the formation of intermolecular halogen bonds was possible when PET experienced dual oxidation. These physiochemical changes enhanced the adsorption of TBM. The adsorption capacity of TBM followed the order of ozonized-chlorinated PET (2.64 × 10−6 μg/μg) > ozonized PET (2.58 × 10−6 μg/μg) > pristine PET (2.43 × 10−6 μg/μg). The impact of raw water characteristics on the adsorption of TBM onto PETs, such as the pH, and the coexistence of inorganic ions and macromolecules (humic acid, surfactant, and bovine serum albumin) were studied. A different predominant adsorption mechanism between TBM and pristine PET or oxidized PETs was proposed.

Screening of polymer types and chemical weathering in macro- and meso-plastics found on lake and river beaches using a combined chemometric approach

In the environment, synthetic polymers, commonly known as "plastics", are well-known to undergo various chemical weathering processes, which modify their surface chemistry by introducing new functional groups. Such changes are important to monitor, as they can severely influence the toxicity caused by plastic debris. Therefore, in this study, two chemometric models are proposed to accelerate the chemical classification of macro- and meso-plastics found in the environment. For this purpose, principal component analysis (PCA) and hierarchical cluster analysis (HCA) were applied on preprocessed infrared spectra of 83 plastic fragments found on public lake and river beaches. HCA associated all beach samples with a known plastic, whereas PCA enabled the association of only 39.8% (33 out of 83) of the beach samples with a known plastic. However, both techniques agreed on 93.9% of the samples identified. According to PCA and HCA results, polypropylene and polyethylene were the most frequently identified polymers in the samples. PCA turned out to be a very promising tool for fast screening of weathered plastics, since the distance of samples from the polypropylene cluster in the PCA plot was correlated with weathering. This was later confirmed by employing other characterization techniques such as micro-Raman, X-ray photoelectron spectroscopy and scanning electron microscopy. Finally, future experiments should focus on the applicability of the proposed combined chemometric approach for very small microplastics (<100 μm), as they have more important effects than larger plastics on aquatic ecosystems.

Sulfide modifies physicochemical properties and mercury adsorption of microplastics

Microplastics (MPs) tend to accumulate and undergo a sulfur weathering process that leads to significant surface changes in sulfur-rich anaerobic environments, such as sewage and wastewater treatment plants. Aged MPs can have a profound impact on environmental behaviors of various toxic pollutants, especially heavy metals. Although previous studies have investigated the adsorption characteristics of metal ions on MPs that are aged in aerobic environments, the sorptive interactions of sulfur-aged MPs in anaerobic environments with mercury, i.e., Hg(II), are largely unknown. In this study, laboratory investigations were conducted to study the sorptive behaviors of Hg(II) by six common MPs treated anaerobically in the presence of sulfide. Adsorption isotherms show that the sulfur aging process greatly enhances the MP sorption capacity of Hg(II). The mechanisms including changes in the specific surface area, electrostatic interactions, surface precipitation, and surface functional groups are responsible for the enhanced adsorption capacities of sulfur-aged MPs. The thiol group that forms on the MP surface plays a dominant role in enhancing the MP adsorption capacity of Hg(II), which is determined by the formation of unsaturated bonds in the molecular chains of MPs. Furthermore, the pathways of surface chemical transformation of MPs during sulfur aging have been proposed. This study promotes our understanding of the potential hazard of MPs as well as the fate and transport of heavy metals in the presence of aged MPs.

Assessment of metals associated with virgin pre-production and freshwater microplastics collected by an Italian river

Recently, microplastics (MPs) have been detected in almost all environmental matrices (water, soil, air, biota). Their presence is of concern due to high environmental persistence and their ability to release or bind pollutants. In light of this, the present work aimed to quantify a poorly studied pollutant category associated with MPs: metals. This analysis was conducted on virgin MPs, used as raw materials in the plastics' production process and on environmental MPs taken from the Ofanto river in Southern Italy. The MP samples were initially grouped for colour, shape and ageing and following mineralised by a microwave digestor. The metals and metalloids Pb, Ba, Sb, Sn, Cd, Mo, Se, Zn, Cu, Ni, Co, Cr, Fe, Mn, Ti, Al, V, Ca, K, Mg, Na were subsequently quantified with ICP-MS. All the analysed elements were found on both types of samples (virgin and environmental MPs), with higher concentrations detected on environmental samples (above 14,400 μg/g^-1) rather than on pristine ones (above 5000 μg/g^-1). Many of these inorganic compounds are probably adsorbed by the surrounding environment, and others are intentionally added during the plastic production process to improve their properties (e.g. additives). Noticeable differences were detected concerning the metal's distribution and amount observed in the two types of MP particles analysed. Moreover, trace element concentrations were also linked to the colour and shape of the environmental particles analysed. Most abundant levels of metals were quantified on aged black fragments, followed by coloured and transparent fragments and black pellets. Our concluding remarks underline the role of MPs as a vehicle for the transport of metals, with significant differences between the high abundance of these pollutants examined in our particles collected in a freshwater environment and the significantly lower concentrations revealed previously in marine MPs.

Spatial, seasonal and ecological risk assessment of microplastics in sediment and surface water along the Thoothukudi, south Tamil Nadu, south east India

Microplastics are a widespread environmental contaminant that raises serious concern for aquatic organisms. Hence, the present study was conducted to investigate the spatial and seasonal variation of microplastics, their characteristics, polymer types and the risk assessment caused by the microplastics in six sampling sites along the Thoothukudi region. The average microplastic abundance ranged from 32 ± 26 to 232 ± 229 items/kg and 54 ± 41 to 619 ± 377 items/l in sediment and surface water, respectively, and they exhibited a significant spatial difference among the sampling sites. The microplastic abundance also showed a significant difference among the seasons with the monsoon significantly recording the highest mean microplastic abundance in sediment (160 ± 130 items/kg) and surface water (454 ± 374 items/l). In sediment and surface water, fragment (sediment: 52.72%, surface water: 40.89%), 0.5-1 mm (sediment: 43.96%, surface water: 31.11%) and blue-coloured (sediment: 52.33%, surface water: 41.85%) microplastics were dominant with no significant difference both spatially and seasonally. Polyethylene, the dominant polymer, was observed in both the sediment and surface water, accounting for about 47.58% and 49.83%, respectively, and it showed no significant difference among the selected sites. This signifies that they are homogenously distributed along the coast and further suggests that these particles persisted in the sediment and surface water for a longer period of time. The results of the polymer hazard index show that the sediment (PHI = 1181.63) and surface water (PHI = 1018.66) were severely contaminated (hazard level V) with microplastic polymers such as PE, PP, PS, PET and PA. It was also found that the degree of the microplastic contamination in sediment (PLI = 3.57) and surface water (PLI = 3.84) was lower (hazard level I). The overall risk index (RI) for sediment (253.48) and surface water (444.74) falls under the higher risk category. From the correlation analysis, a significantly positive relationship was observed between microplastics in sediment and surface water based on each classification (abundance, shape, size, colour and polymer). This suggests that microplastics rejoin the water column from the sediment through resuspension, which occurs due to the circulation, tides and sedimentation rate. This might be the reason for the higher microplastic abundance in the surface water than in the sediment. As a result, proper management measures to reduce plastic waste disposal in the marine environment should be implemented to lessen the effects of microplastics on marine biota and on public health.

Plastic waste cleanup priorities to reduce marine pollution: A spatiotemporal analysis for Accra and Lagos with satellite data

Plastic waste, with an estimated lifetime of centuries, accounts for the major share of marine litter. Each year, thousands of fish, sea birds, sea turtles, and other marine species are killed by ingesting or becoming entangled with plastic debris. Reducing marine plastic pollution is particularly challenging for developing countries owing to the wide dispersal of plastic waste disposal and scarce public cleanup resources. To costeffectively reduce marine pollution, resources should target "hotspot" areas, where large volumes of plastic litter have a high likelihood of ending up in the ocean. Using new public information, this study develops a hotspot targeting strategy for Accra and Lagos, which are major sources of marine plastic pollution in West Africa. The same global information sources can support hotspot analyses for many other coastal cities that generate marine plastic waste. The methodology combines georeferenced household survey data on plastic use, measures of seasonal variation in marine plastic pollution from satellite imagery, and a model of plastic waste transport to the ocean that uses information on topography, seasonal rainfall, drainage to rivers, and river transport to the ocean. For cleanup, the results for West Africa assign the highest locational priority to areas with heavy plastic-waste disposal along river channels or in steeply sloped locations with high rainfall runoff potential near rivers. They assign the highest temporal priority to just before the onset of the first-semester rainy season, when runoff from the first rains transports large volumes of plastic waste that have accumulated during the dry season.

Seasonal and spatial distribution of microplastics in sediments by FTIR imaging throughout a continuum lake - lagoon- beach from the Tunisian coast

Plastics pollution in marine environment has become an issue of increasing scientific concern. This work aims to study the temporal and spatial distribution of plastics in sediments from three different Tunisian ecosystems; Rimel Beach, Bizerta lagoon and Ichkeul lake. Sediment sampling was conducted in surface (2 cm) and depth (15 cm) during spring, summer and winter. Plastics debris were separated by size fractions: macro (>5 mm), meso (1-5 mm) and microplastics (<1 mm) to optimize the time necessary for their characterisation. Macroplastics and mesoplastics were identified using an IR Attenuated total reflectance (ATR) and microplastics with Imaging Fourier transform infrared spectroscopy (FTIR) spectroscopy after an optimized extraction protocol. Results indicate that, the lowest contamination degree with macroplastics was recorded in Ichkeul lake, 2 macro debris/m² (marine protected area, national parc of Ichkeul). Mesoparticles were only detected in lagoon of Bizerte in large quantities (4900 item/kg of sediment in surface and 680 item/kg of sediment in depth) and were identified principally as paint products. For microplastics, the repartition was quite homogeneous between the three sites with an average abundance was 130.55 ± 65.61 items/kg for all seasons. The variations of microplastics abundances on the three sites could not be clearly related to the seasons. Whereas the polymer characterisation in the surface and depth sediments of the three studied areas were principally due to eight types of polymers (PVC, PET, PP, PE PS, Polyamide (PA) and polymeric methyl methacrylate (PMMA)) as reported in many other studies, surprisingly all MPs recovered in the study were smaller than 300 μm, >70 % being fragments. This study brings new results as regards to the state of plastic contamination in Tunisian coast and shows the importance of investigating different ecosystems in such studies.

A record of microplastic in the marine nearshore waters of South Georgia

The polar plastics research community have recommended the spatial coverage of microplastic investigations in Antarctica and the Southern Ocean be increased. Presented here is a baseline estimate of microplastics in the nearshore waters of South Georgia, the first in situ study of the north-east coast of the island. Our results show that the microplastic concentration in seawater at twelve stations in proximity to King Edward Point Research Station ranged from 1.75 ± 5.17 MP/L (mean ± SD), approximately one order of magnitude higher than similar studies of sea surface waters south of the Polar Front. Levels of microplastics in freshwater (sampled from Gull Lake) and precipitation (collected adjacent to the research station) were 2.67 ± 3.05 MP/L, and 4.67 ± 3.21 MP/L respectively. There was no significant difference in the microplastic concentration between seawater sites, and no significant bilateral relationship between concentration and distance from the research station outlets. We report an average concentration of 1.66 ± 3.00 MP/L in wastewater collected from the research station but overall, the counts of microplastics were too low to attach any statistical significance to the similarity in the microplastic assemblages of seawater and wastewater, or assemblages retrieved from penguin species in the region in other studies. Using a calculation described in contemporary literature we estimate the number of microfibres potentially being released from ships and stations annually in the region but acknowledge that further samples are needed to support the figures generated. More extensive research into microplastic distribution, characteristics, and transport in the region is recommended to fully compute the level of risk which this pollutant represents to the ecosystem health of this remote region.

Crack Patterns of Environmental Plastic Fragments

Secondary microplastics usually come from the breakdown of larger plastics due to weathering and environmental stress cracking of plastic wastes. In the present study, 5013 plastic fragments were collected from coastal beaches, estuary dikes, and lake banks in China. The fragment sizes ranged from 0.2 to 17.1 cm, and the dominant polymers were polypropylene and polyethylene. Cracks were observed on the surfaces of 49-56% of the fragments. Based on the extracted crack images, we proposed a general crack pattern system including four crack types with specific definitions, abbreviations, and symbols. The two-dimensional spectral analysis of the cracks suggests that the first three patterns showed good regularity and supported the rationality of the pattern system. Some crack metrics (e.g., line density) were closely correlated with the carbonyl index and additives (e.g., phthalate esters) of fragments. For crack investigation in field, we proposed a succinct protocol, in which five crack ranks were established to directly characterize the degree of cracking based on the line density values. The system was successfully applied to distinguish the differences in crack features at two representative sites, which indicates that crack pattern is a useful tool to describe the morphological changes of plastic surfaces in the environment.

Effects and Impacts of Different Oxidative Digestion Treatments on Virgin and Aged Microplastic Particles

Although several sample preparation methods for analyzing microplastics (MPs) in environmental matrices have been implemented in recent years, important uncertainties and criticalities in the approaches adopted still persist. Preliminary purification of samples, based on oxidative digestion, is an important phase to isolate microplastics from the environmental matrix; it should guarantee both efficacy and minimal damage to the particles. In this context, our study aims to evaluate Fenton’s reaction digestion pre-treatment used to isolate and extract microplastics from environmental matrices. We evaluated the particle recovery efficiency and the impact of the oxidation method on the integrity of the MPs subjected to digestion considering different particles’ polymeric composition, size, and morphology. For this purpose, two laboratory experiments were set up: the first one to evaluate the efficacy of various digestion protocols in the MPs extraction from a complex matrix, and the second one to assess the possible harm of different treatments, differing in temperatures and volume reagents used, on virgin and aged MPs. Morphological, physicochemical, and dimensional changes were verified by Scanning Electron Microscope (SEM) and Fourier Transformed Infrared (FTIR) spectroscopy. The findings of the first experiment showed the greatest difference in recovery rates especially for polyvinyl chloride and polyethylene terephthalate particles, indicating the role of temperature and the kind of polymer as the major factors influencing MPs extraction. In the second experiment, the SEM analysis revealed morphological and particle size alterations of various entities, in particular for the particles treated at 75 °C and with major evident alterations of aged MPs to virgin ones. In conclusion, this study highlights how several factors, including temperature and polymer, influence the integrity of the particles altering the quality of the final data.

Weathering indices of microplastics along marine and coastal sediments from the harbor of Cartagena (Spain) and its adjoining urban beach

Marine and coastal sediments from the harbor of Cartagena (Spain) and its adjoining beach were investigated regarding their microplastic burden. Fibers accounted for 47.62% and 61.66% in marine and coastal sediments, respectively, followed by films (31.43% and 18.76%) and fragments (20.95% and 18.65%). Polyvinyl (36.07%), polypropylene (21.31%), and polyethylene (18.03%) were isolated for marine sediments, and low-density polyethylene (40.71%), polypropylene (20.16%), and acrylate (11.37%) for coastal sediments. Highest concentrations were found in the deepest marine sediments (24.0 m) and in the furthest zone from the seashore for coastal sediments (18 m). Carbonyl index increased in the intermediate area (12.5 m) for marine sediments (0.51), whilst vinyl index was maximum for the deepest samples (1.94), reporting Norrish type I and II reactions, respectively. Coastal sediments collected close to the high tide line displayed the highest average values for both indices, 1.57 and 1.29, respectively, indicating a higher exposition to weathering variables.

Microplastics in the sediments of small-scale Japanese rivers: Abundance and distribution, characterization, sources-to-sink, and ecological risks

Microplastic pollution in small-scale river sediments remains mostly unknown. This study explored microplastics in the sediments of four small-scale Japanese rivers in Yamaguchi Prefecture: the Awano, Ayaragi, Asa, and Majime. Sediment samples (n = 23) were collected from the selected stations. Density separation and wet peroxidation methods were applied to extract microplastics. Polymers were detected through attenuated total reflectance-Fourier transform infrared spectroscopy. Microplastic abundance indicated relatively moderate values in the small-scale Japanese rivers compared to other rivers around the world. Large microplastics (1-5 mm) in size, fragments in shape, and high-density particles of diverse polymers dominated. Polyvinyl chloride, polyethylene, and polypropylene were the major polymers. The polymers-polyvinyl chloride, polymethylmethacrylate, polyurethane, fluorinated ethylene propylene, and polybutylene in sediments were distinct from those detected in surface water, as were the predominance of large-size (1-5 mm) and fragment-shape microplastics. In contrast to surface water, sediments preserved both common and distinctive microplastics. Thus, the riverine sediment compartment acted as microplastic sink. Scanning electron microscopic (SEM) analysis suggested the presence of weathered microplastics in sediments. Energy dispersive X-ray spectroscopic analysis (EDX) revealed metal contaminants on the microplastic surfaces, indicating synergistic hazard potentials in the riverine ecosystems. Ecological risk assessment results suggested low to very high risks of microplastic pollution for the rivers. The higher abundances of microplastics and highly toxic polymers contributed to the elevated ecological risks. Polyvinyl chloride, acrylonitrile butadiene styrene, polyurethane, and polymethylmethacrylate were the detected highly toxic polymers. The urban and residential areas affected stations ranked high to very high ecological risks. The sites posing very high ecological risks were regarded as pollution hotspots. Overall, this study developed new insights into microplastic pollution in the small-scale rivers and ecological risks for riverine environments, as well as providing a baseline for more comprehensive risk assessments and developing pollution control and management strategies.

From model to nature - A review on the transferability of marine (micro-) plastic fragmentation studies

Microplastic research has experienced almost exponential growth in publications and proceeded faster than ever throughout the last years. This increase comes with a downside in terms of missing standardizations and definitions especially concerning experiments. Furthermore, incomparability and lacking transferability of fragmentation studies onto the marine environment still hinder more realistic extrapolations and accurate numerical models. This review offers a first approach to tackle this problem by converting studies into comparable dimensions by rating their experimental settings and comparing them to in-situ values, thus, assisting future research with an unbiased and fast tool to assess the applicability of studies for their calculations. For this purpose, the main influencing factors for the environmental fragmentation of plastics were identified, ranked in terms of their impact, and, subsequently, applied to 49 setups of peer-reviewed studies. The average transferability into nature of the considered laboratory studies is 41%. Unconsidered implementation of proper mechanical wear by water and sediment movement into the test setups of around 80% of all reviewed studies explains this value. However, other parameters like UV radiation implementation, also pose an obstacle in about 50% of the laboratory studies. Nevertheless, even the reviewed in-situ fragmentation studies revealed problems in transferability in some of the weathering components caused by the fixation of the samples. This review indicates that the current database on plastic fragmentation is most likely not reliable enough for robust extrapolations or numerical models. A set of recommendations for test settings is proposed to improve upcoming experiments' quality and comparability.

The spatial and temporal changes of beach litter on Istanbul (Turkey) beaches as measured by the clean-coast index

Possible access routes of macro and mesoplastics, acting as the main sources of pollution in the coastal ecosystem, are examined as a case study on four beaches along the Istanbul coast. A total number of 3787 items belonging to 12 categories of debris types were collected as follows: macroplastics 47.8%; mesoplastics 9.2%; and others 43.0% such as paper pieces, glass pieces and metal beverage cans. Clean-coast and carbonyl indexes were also used to identify the level of cleanliness of the sampling sites. The clean-coast index revealed that all of the sample sites were categorized as extremely dirty. Moreover, carbonyl index results indicate that 35.7% of the samples were at a high oxidation level indicating that some of the particles relatively spend more time on beaches. The litter concentration and surface oxidation results were addressing issues that should be taken into consideration to improve litter management strategies of the beaches.

Critical review of the characteristics, interactions, and toxicity of micro/nanomaterials pollutants in aquatic environments

A wide range of contaminants of emerging concern such as micro/nanoplastics (MPs/PNPs) and metal-nanoparticles (Me-NPs) from anthropogenic activities have been identified in aquatic environments. The hazardous effects of these micro/nanomaterials as pollutants in organisms and the lack of knowledge about their behavior in aquatic environments have generated growing concern in the scientific community. The nanomaterials have a colloidal-type behavior due to their size range but with differences in their physicochemical properties. This review comprises the behavior of micro/nanomaterials pollutants and the physicochemical interactions between MPs/PNPs and Me-NPs in aquatic environments, and their potential toxicological effects in organisms. Moreover, this article describes the potential use of Me-NPs to remove MPs/PNPs present in the water column due to their photocatalytic and magnetic properties. It also discusses the challenge to determine harmful effects of micro/nanomaterials pollutants in organisms and provides future research directions to improve integrated management strategies to mitigate their environmental impact.

Microplastic pollution in surface seawater and beach sand from the shore of Rayong province, Thailand: Distribution, characterization, and ecological risk assessment

The distribution, characteristics, and ecological risk of microplastics in beach sand and seawater samples collected along the shore of Rayong province, Thailand, were investigated in this study. The average microplastics abundance in beach sand and seawater was 338.89 ± 264.94 particles/kg d.w. and 1781.48 ± 1598.36 particles/m³, respectively. Beach sand and seawater had the most yellow-brown particles and transparent microfibers, respectively. The most common microplastics (100-500 μm) and polyethylene were found. In beach sand, the potential ecological risk (RI) is classified as minor, while in seawater, it is classified as medium. The PLI_zone in beach sand and seawater was Hazard Level II and Hazard Level IV, respectively. Despite their apparent proximity, the non-correlation between risk levels in beach sand and seawater may be due to polymer type variations influenced by the different land-based and sea-based sources.

The road to sustainable use and waste management of plastics in Portugal

As a European Union (EU) member, Portugal must comply with reductions in plastic waste. In Portugal, the 330 items/100 m of beach litter, comprising up to 3.9 million pieces and of which 88% is plastic, is higher than the EU median (149 items/100 m) and must be reduced to 20 items/100 m (94%). Integrative measures are needed to reduce littering and improve plastics' use and disposal under the circular economy. Of this 414 kt of plastic packaging waste, 163 kt were declared plastic packaging, 140 kt subjected to recycling, and 94 kt to energy recovery. The current recycling rate of plastic packaging (34%) should be improved to reach EU recycling averages (42%) and goals and to provide widespread benefits, considering revenues of 167 €/t. As a net importer of waste, Portugal could benefit from the valorization of imported waste. Besides increased recycling, pyrolysis and gasification could provide short-term alternatives for producing value-added substances from plastic waste, such as hydrogen, consistent with the National Plan of Hydrogen and improving ongoing regulations on single-use plastics. This manuscript provides an integrative view of plastics in Portugal, from use to disposal, providing specific recommendations under the circular economy.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available in the online version of this article at 10.1007/s11783-021-1439-x and is accessible for authorized users.

Stranded in the high tide line: Spatial and temporal variability of beached microplastics in a semi-enclosed embayment (Arcachon, France)

Coastal environments are a predominant ultimate destination of marine debris, becoming a key focus of studies assessing microplastic (MP) contamination. Here, we described the visible fraction of MP (from 0.5 to 5 mm) that washed up during the high tide at different sites of a semi-enclosed mesotidal bay and investigated the main abiotic factors driving MP beaching. Three contrasted beaches of the Arcachon Bay (SW France) were monitored on a monthly basis during 2019. Samplings were made along a 100 m longitudinal transect at the high-water strandline (4 quadrats of 0.25m²) and at an intermediate tidal range. Each sampled particle was characterized by morphometric data (e.g. size, shape, color, roughness) and polymer identification was performed by ATR-FTIR technique. Results show that MP concentration was higher on the beach located at the mouth of the bay (36.0 ± 39.2 MP.m^-2) than at the back and the outside of the bay (respectively 2.7 ± 4.4 and 1.7 ± 2.4 MP.m^-2). This may be related to the strong currents at the entry of the embayment and the beach orientation, exposed to predominant winds. Beached MP were mainly pre-production pellets and fragments as they represented respectively 49% and 39% of all analyzed shapes. Polymers with low density were particularly abundant. Polyethylene represented 69% of all the particles while polypropylene accounted for 17% and polystyrene for 10%. We also observed that MP were mostly washed up when wind, waves and river flow were more intense. Analysis suggest that wind direction and speed are key factors influencing beaching as strong onshore wind enhance this process.

Inclusion of shape parameters increases the accuracy of 3D models for microplastics mass quantification

As microplastics may bring about adverse effects on living organisms, it is important to establish more precise quantification approaches to better understand their dynamics. One method to determine the concentration of microplastics is to estimate their mass using three-dimensional (3D) models, but its accuracy is not well known. In this study, we evaluated the shape of the particles and verified the accuracy of a 3D model-based mass estimation using samples from a tidal flat facing Tokyo Bay. The particle shape evaluation suggested that the microplastics were flat and irregular in shape; based on these data, we created two types of models to estimate their mass. As a result, an accuracy of mass estimation by our model was higher than other models that consider the slenderness and flatness of particles. The optimization of mass estimation methods based on 3D models may improve the reliability of microplastic evaluation in monitoring studies.

Seasonal variation of diversity, weathering, and inventory of microplastics in coast and harbor sediments

Spatiotemporal variations in the abundance of microplastics (MPs) in surface sediments along the southwestern coast of Taiwan (including harbor and coastal regions) were investigated and the diversity, degree of weathering, and inventory of MPs in the sediments further quantified. The spatiotemporal variations of MP characteristics were used to assess possible transport routes of MPs. Results indicated that the average MP abundance in the partially-enclosed harbor region was 79.3 MPs in 1 kg dry sediment (item/kg dw), which was 3-5 times higher than that in the coastal region. Average MP abundance during the dry season (36.5 ± 52.2 item/kg dw) was relatively higher than that during the wet season (22.3 ± 23.2 item/kg dw). The dominant MPs were small (0.1-1.0 mm, 90%), colored (62.3%), and consisted mainly of fibers (54.1%) and fragments (40.5%). Analysis by μFTIR revealed the presence of ten types of polymers in the MPs, with the most abundant being polypropylene (35.1%), rayon (33.2%), and polystyrene (10.0%). Values of the microplastic diversity integrated index (MPDII) indicated that MP diversity was greater in the harbor region (MPDII = 0.62) than in the coastal region (MPDII = 0.51-0.54), and greater during the wet season (MPDII = 0.60) than during the dry season (MPDII = 0.50). As indicated by values of the MP carbonyl index (CI), the MPs exhibited a high degree of oxidation (CI >0.31) that appeared unrelated to spatiotemporal variations. In the dry season, MP inventory was 12.2 tons and the wet season inventory was 8.1 tons. The hydrodynamic forces may be an influenced force for the spatiotemporal distribution patterns of the MPs in surface sediments. MPs could accumulate in the surface sediments during the dry season and resuspend in the wet season with the higher rainfall and then migrate towards the deep sea following the water flow.

A One Health perspective of the impacts of microplastics on animal, human and environmental health

Microplastics contamination is widespread in the environment leading to the exposure of both humans and other biota. While most studies overemphasize direct toxicity of microplastics, particle concentrations, characteristics and exposure conditions being used in these assays needs to be taken into consideration. For instance, toxicity assays that use concentrations over 100,000 times higher than those expected in the environment have limited practical relevance. Thus, adverse effects on animal and human health of current environmental concentrations are identified as a knowledge gap. Conversely, this does not suggest the lack of any significant effects of microplastics on a global scale. The One Health approach provides a novel perspective focused on the intersection of different areas, namely animal, human, and environmental health. This review provides a One Health transdisciplinary approach to microplastics, addressing indirect effects beyond simple toxicological effects. Microplastics can, theoretically, change the abiotic properties of matrices (e.g., soil permeability) and interfere with essential ecosystem functions affecting ecosystem services (e.g., biogeochemical processes) that can in turn impact human health. The gathered information suggests that more research is needed to clarify direct and indirect effects of microplastics on One Health under environmentally relevant conditions, presenting detailed knowledge gaps.

Degradation degree analysis of environmental microplastics by micro FT-IR imaging technology

The degradation potential of microplastics remains a critical issue for researching marine litter, and it is one of the most important factors that can be used for calculating the persistence time of microplastics in certain conditions. However, there are lack of standard or approved methods for estimating the ageing stage of environmental microplastics. In this study, the potential of spectral-image fusion strategy was investigated to analyze the degradation degree of polyethylene microplastics in natural exposure of coastline. The proposed spectral-image fusion linear model showed a significant ability to classify the degradation degree of environmental microplastics samples with the best accuracy of 97.1% as compared to two single-sensing information-based linear models (with one spectral wavelength of the carbonyl index at 1720 cm^-1 or three-channel components from LAB color-space). This is the first attempt to qualitatively measure the degradation degree of the naturally exposed microplastics based on spectral-image fusion model. The proposed fusion model based strategy is an effective tool for predicting the degradation degree of the field exposed microplastics.

Microplastics on Barra beach sediments in Aveiro, Portugal

Microplastic (MPs) pollution has been recognized as a serious threat to marine environment with the growing use of plastics. There is no sufficient data on the extent and characteristics of MPs pollution in the beach sediments and sand in the Atlantic Ocean. The coastal area is one of the main tourist zones in Aveiro in Portugal, thus, impacted by both tourism and maritime traffic, which are major sources of MPs. Considering this issue, 33 sediment samples were collected from the Praia da Barra beach in Aveiro. This pilot study showed that large quantities of MPs are accumulated on this beach with a median concentration of 100 MP kg-1 (15-320 MP kg-1), that is dominated by polyethylene (30%), polypropylene (27%), polystyrene (18%), nylon (12%), and polyester (6%). Size <1 mm constituted 99.5% of particles, mostly of transparent or black colors, with highest concentrations closest to the water line.

Analysis of the occurrence of microplastics in beach sand on the Brazilian coast

The occurrence of microplastics in coastal areas is a growing concern due to the increase in plastic waste pollution in recent decades. This study had as objective to evaluate the occurrence of microplastics in Brazilian beach sand, using a simple and fast methodology. In addition, possible microplastics were classified according to color, shape and chemical composition. The study was conducted on six beaches on the Brazilian coast: Pecado Beach (RJ), Castanheiras Beach (ES), Regência Beach (ES), Imbassaí Beach (BA), Viral Beach (SE) and Ponta dos Mangues Beach (SE). The methodology was adapted from international protocols, with section demarcation (100 m), where samples were collected from the superficial layer of the beach sand in ten quadrants (50 cm × 50 cm). The laboratory extraction procedure consisted of the density separation technique in two stages: the first used sodium chloride solution and the second used zinc chloride solution. For the visual inspection and screening procedures, a stereoscopic microscope was used. A total of 166 items of microplastics were collected on the six beaches on the Brazilian coast under study. The largest quantity of possible microplastics was recorded on the beaches of Viral (SE) and Ponta dos Mangues (SE) with 30.4 items/m² and 17.4 items/m², respectively. Regarding colour, white items were predominant (49.3%), and among particle types, fragments represented 85.1%. In addition, some microplastic particles were sent for FT-IR analysis, one of which was identified as being polyethylene. This study contributes to the knowledge of the presence of microplastics in different locations, and to supporting decision makers regarding coastal management.

Microplastic degradation by hydroxy-rich bismuth oxychloride

Microplastics, as a class of widely dispersed persistent pollutants, the main reactive oxygen species is far from clarified in their photocatalytic degradation. In this study, a novel hydroxy-rich ultrathin BiOCl (BiOCl-X) was prepared at room temperature. BiOCl-X shows a strong potential for photocatalytic degradation of microplastics, and the mass loss of plastics is 24 times higher than that of the BiOCl nanosheets. More importantly, we explored the photocatalytic mechanism through electron paramagnetic resonance and capture experiments, and found that the surface hydroxyl of BiOCl can effectively enhance the production of hydroxyl radicals, resulting in boosting degradation performance. Here, we provide new insights that photocatalytic degradation of microplastic is dependent on surface hydroxyl groups. This work could be useful for controllable designs of hydroxy-rich photocatalysts for applications in microplastic degradation.