Constructed wetland-microbial fuel cell for azo dyes degradation and energy recovery: Influence of molecular structure, kinetics, mechanisms and degradation pathways

Simultaneous degradation of direct black BN dye wastewater and electricity generation by red soil microbial fuel cells

Azo dyes, widely used in industries, pose environmental challenges due to their recalcitrance and potential carcinogenicity. Microbial fuel cells (MFCs) offer a sustainable solution by coupling wastewater treatment with renewable energy production. However, research on polyazo dye treatment using MFCs remains limited. This study developed a novel MFC system using red soil as the anode substrate (RSMFC) to treat direct black BN wastewater, focusing on removal efficiency, power generation, and microbial community dynamics. The concentration of direct black BN influenced the RSMFC's performance, showing a "low promotion and high inhibition" effect on electricity generation. The system achieved a peak power density of 584.82 mW/m3. GC-MS analysis identified primary degradation products, including 13-Docosenamide, (Z)- and Bis(2-ethylhexyl) phthalate, revealing the degradation pathway of direct black BN. Microbial community analysis highlighted the roles of Bosea, Citrifermentans, Desulfosporosinus, and Pseudomonas in dye tolerance and degradation. Additionally, influent concentrations of 300 mgCOD/L, containing 99.7 mg/L direct black BN, significantly enriched electricigens such as Geobacter, Desulfovibrio, Pseudomonas, and Acinetobacter. Our findings provide essential groundwork for optimizing RSMFCs and advancing azo dye wastewater treatment technologies. The simultaneous removal of direct black BN and electricity generation in the RSMFC holds promise for sustainable environmental management.

Dye removal from textile wastewater using scoria-based of vertical subsurface flow constructed wetland system

Textile wastewater poses significant risks if discharged untreated, especially due to the presence of synthetic dyes, salts, and heavy metals. As a result, constructed wetlands have emerged as a promising solution for sustainable textile wastewater management. In this context, this study evaluates a micro-scale vertical subsurface flow constructed wetland (VSSFCW) for treating textile wastewater. Specifically, the experimental setup consisted of two microcosm units, each with a depth of 32 cm and a diameter of 24 cm, which were filled with scoria media. One unit was planted with Vetiver grass, while the other was left unplanted. Furthermore, the experiment was conducted with a hydraulic retention time of 3 days. Additionally, the scoria media was characterized using FTIR, SEM, XRD, CEC, and pH analyses, which revealed notable changes in both functional groups and surface morphology. The scoria was found to have a CEC of 12 meq/100 g and a pH of 8.86, both of which facilitated pollutant removal. Moreover, the textile wastewater that was fed into the VSSFCW systems contained dye concentrations ranging from 39.41 to 45.29 mg/L throughout the study period. As a result of this setup, the dye removal efficiency in both wetland cells increased over time. Notably, the VSSFCW planted with Vetiver grass achieved a higher dye removal efficiency (84%) compared to the unplanted system (80%). These findings, therefore, demonstrate that the VSSFCW consistently meets wastewater standards, representing a low-cost, decentralized solution to address textile pollution, especially in developing countries like Ethiopia. In conclusion, the synergy between the scoria media and Vetiver grass proved highly effective in treating textile wastewater.

Variation in bioelectricity production in integrated CW-MFC: An insight into coliform inactivation affected by HRT and power density

In the current study, domestic wastewater was treated in three identical vertical up-flow reactors; R1 (constructed wetland), R2 (CW-MFC), and R3 (unplanted CW-MFC) under different HRTs of 36 h (Phase 1), 24 h (Phase 2), and 18h (Phase 3). Periodic reduction of HRT from Phase 1 to Phase 3 resulted in deteriorated organics and fecal coliform removal by the reactors. R2 showed higher pollutant removal and voltage generation in every phase of the study compared to R1 and R3. R2 exerted 93%, 87%, and 57% mean COD removal during Phase 1, Phase 2, and Phase 3; with maximum open circuit voltage generated as 925 mV, 695 mV, and 429 mV respectively. Linear regression analysis showed that operating voltage and power density had significant effects on the variance of effluent fecal coliform concentration. The regression analysis also revealed that 36 h-24 h HRT was critical where power density influenced the pathogen inactivation considerably. Multiple batch studies revealed the main role of reactor media and plant roots was to support the attached microbial growth for biodegradation of the organics. Radial oxygen loss did not affect the anaerobic environment at the anode after 800 days of reactor operation.

Evolutionary trends and development of constructed wetland coupled microbial fuel cell: A decade of development

Constructed wetland coupled microbial fuel cells (CW-MFC) have gained considerable attention as an innovative sustainable technology for simultaneous wastewater treatment and bio-electricity generation since its inception in 2012. This study, which employed bibliometrics of research articles and patent analysis, is a comprehensive investigation into the evolutionary trend and development status of CW-MFC. We analyzed 85 patents and 247 research articles using structured and unstructured data. By using the logistic model and econometric analysis, we predicted the technological life cycle and investigated the factors driving the development of CW-MFC. In addition, this study discusses the innovative hotspots, research and innovative trends, and key contributors at the forefront of this green infrastructure. The study results show that CW-MFC technology has gained greater interest under the influence of national and international policies, market demand, economic growth, and national R&D expenditure, highlighting its global impact. The study also showed that CW-MFC was predominantly distributed in Asia, with China at the forefront. The technology evolution path from both patents and papers showed the transition of research and development from the performance evaluation of CW-MFC with conventional-based technology to the current study focused on system optimization by exploring designs and component factors to enhance efficiency. Furthermore, the technological maturity (TMR) of CW-MFC was determined using the logistic model to be 50.5%, with significant potential for further development (R2 = 0.98). Overall, this study provides a comprehensive understanding of the current trends of CW-MFC development and provides forecasting and direction for future developments.

Effect of Typha angustifolia, feeding modes and intermittent aeration on the performance of hybrid constructed wetland systems treating Reactive Black 5 diazo dye wastewater

The current research assessed the effectiveness of four hybrid constructed wetland (HCW) systems for the remediation of synthetic dye wastewater with Reactive Black 5 (RB5) azo dye. All HCW systems had identical configurations, consisting of a horizontal CW followed by a vertical CW, and operated under diverse conditions such as the presence of plants (Typha angustifolia), feeding modes (batch and continuous) and intermittent aeration (4 h day-1). Anaerobic-aerobic conditions simulated within the HCW systems were crucial in removing the pollutants from synthetic dye wastewater. The planted HCW system operating in continuous-continuous feeding mode exhibited better colour reduction (91%). The planted HCW system with continuous-continuous feeding mode and intermittent aeration achieved better COD (90%) and BOD5 (99%) removals, and a significant reduction in dye degradation intermediates generated from RB5 reduction. Typha angustifolia had a beneficial effect on pollutant removals, attributed to the enhanced microbial density and biomass activity in the plant rhizosphere. The microbial density and biomass activity in the rhizosphere region of the planted system were (116 ± 28) × 104 CFU mL-1 and 1074 mg COD g VSS-1 day-1, respectively, notably higher than those in the non-rhizosphere region of the planted system ((186 ± 97) × 102 CFU mL-1 and 794 mg COD g VSS-1 day-1) and the unplanted system ((91 ± 35) × 102 CFU mL-1 and 772 mg COD g VSS-1 day-1). The introduction of continuous feeding mode and intermittent aeration in vertical units further improved pollutant removals in the HCW system. This improvement could be attributed to the steady feeding approach inherent in continuous mode operation, which may result in less toxicity to the system and the degradation of organic compounds under more favourable aerobic conditions.

Constructed wetland microbial fuel cell as enhancing pollutants treatment technology to produce green energy

The persistent challenge of water pollution, exacerbated by slow progress in ecofriendly technologies and accumulating pollutants, underscores the need for innovative solutions. Constructed Wetland Microbial Fuel Cell (CW-MFC) emerges as an intriguing environmental technology capable of adressing this issue by eliminating contaminants from wastewater while simultaneously producing green energy as an additional bonus. In recent years, CW-MFC technology has gained attention due to its sustainability and promising prospects for a circular waste-free industry. However, due to various technological and biological challenges, it has not yet achieved wide-scale application. This review examines the current state of CW-MFC technology and identifies both biotic and abiotic strategies for optimization through operational and structural improvements affecting biocomponents. Our review highlights several key findings: (1) Plants play an important role in reducing the system's inner resistance through mechanisms such as radial oxygen loss, evapotranspiration, and high photosynthetic flow, which facilitate electroactive bacteria and affect redox potential. (2) Plant characteristics such as root porosity, phloem and aerenchyma development, chlorophyll content, and plant biomass are key indicators of CW-MFC performance and significantly impact both pollutant removal and energy harvesting. (3) We expand the criteria for selecting suitable plants to include mesophytes and C3 pollutant-tolerant species, in addition to traditional aquatic and C4 plants. Additionally, the review presents several technical approaches that enhance CW-MFC efficiency: (1) design optimization, (2) use of novel materials, and (3) application of external electrical fields, aeration, light, and temperature adjustments. CW-MFCs are capable of nearly complete elimination of a wide range of contaminants, including organic matter (84 % ± 10), total nitrogen (80 % ± 7) and phosphorus (79 % ± 18) compounds, metals (86 % ± 10), pharmaceuticals (87 % ± 7), dyes (90 % ± 8), and other complex pollutants, while generating green energy. We hope our findings will be useful in optimizing CW-MFC design and providing insights for researchers aiming to advance the technology and facilitate its future scaling.

Kinetic study on the degradation of Acid Red 88 azo dye in a constructed wetland-microbial fuel cell inoculated with Shewanella oneidensis MR-1

Removal of Acid Red 88 (AR88) as an azo dye from the synthetic type of wastewater was studied in a laboratory-made constructed wetland microbial fuel cell (CW-MFC) inoculated with Shewanella oneidensis MR-1 (SOMR-1). Plant cultivation was implemented using a typical CW plant known as Cyperus alternifolius. The complexity of the SOMR-1 cell membrane having different carriers of electrons and H+ ions gives the microbe special enzymatic ability to participate in the AR88 oxidation link to the O2 reduction. Nernst equation developed based on analyzing the involved redox potential values in these electron exchanges is describable quantitatively in terms of the spontaneity of the catalyzed reaction. Power density (PD) at 100 mg/L of the AR88 under closed-circuit conditions in the presence of the plant was 11.83 mW/m2. Reduction of internal resistance positively affected the PD value. In determining degradation kinetics, two approaches were undertaken: chemically in terms of first- and second-order reactions and biochemically in terms of the mathematical equations for rate determination developed on the basis of substrate inhibitory concept. The first-order rate constant was 0.263 h-1 without plant cultivation and 0.324 h-1 with plant cultivation. The Haldane kinetic model revealed low ks and ki values indicating effective degradation of the AR88. Moreover, the importance of acclimatization in terms of the crucial role of lactate was discussed. These findings suggest that integrating the SOMR-1 electrochemical role with CW-MFC could be a promising approach for the efficient degradation of azo dyes in wastewater treatment.

Constructed wetlands combined with microbial fuel cells (CW-MFCs) as a sustainable technology for leachate treatment and power generation

The physical and chemical treatment processes of leachate are not only costly but can also possibly produce harmful by products. Constructed wetlands (CW) has been considered a promising alternative technology for leachate treatment due to less demand for energy, economic, ecological benefits, and simplicity of operations. Various trends and approaches for the application of CW for leachate treatment have been discussed in this review along with offering an informatics peek of the recent innovative developments in CW technology and its perspectives. In addition, coupling CW with microbial fuel cells (MFCs) has proven to produce renewable energy (electricity) while treating contaminants in leachate wastewaters (CW-MFC). The combination of CW-MFC is a promising bio electrochemical that plays symbiotic among plant microorganisms in the rhizosphere of an aquatic plant that convert sun electricity is transformed into bioelectricity with the aid of using the formation of radical secretions, as endogenous substrates, and microbial activity. Several researchers study and try to find out the application of CW-MFC for leachate treatment, along with this system and performance. Several key elements for the advancement of CW-MFC technology such as bioelectricity, reactor configurations, plant species, and electrode materials, has been comprehensively discussed and future research directions were suggested for further improving the performance. Overall, CW-MFC may offer an eco-friendly approach to protecting the aquatic environment and come with built-in advantages for visual appeal and animal habitats using natural materials such as gravel, soil, electroactive bacteria, and plants under controlled condition.

Mechanistic investigation of azo dye removal from carbon-deficient dyeing wastewater using horizontal-vertical constructed wetlands

Azo dye degradation can be achieved by simulating a series of anaerobic and aerobic conditions within the constructed wetland (CW) system. The current investigation evaluated the effectiveness of a baffled horizontal-vertical CW system, planted with Typha angustifolia, simulating anaerobic-aerobic conditions to treat carbon-deficient synthetic dyeing wastewater containing 100 mg/L Reactive Yellow 145 (RY145) azo dye. In the absence of an available carbon source in dyeing wastewater, an optimum quantity of sodium acetate was supplemented as the substrate for microbial degradation of RY145. Influent dyeing wastewater characteristics were 5555 ADMI colour, 461 mg/L chemical oxygen demand (COD) and 39 mg/L total nitrogen (TN). During the operation period, the CW system achieved 97% colour, 87% COD, 95% ammonium nitrogen (NH4+-N) and 71% TN removals at 4 d hydraulic retention time (HRT). Favourable environmental conditions, such as low redox conditions and substrate availability in horizontal CW, contributed to a significant reduction in colour (96%). Most TN reduction (67%) happened in horizontal CW by denitrification and plant assimilation. The metagenomic study revealed that Proteobacteria, Bacteroidetes, Chloroflexi and Firmicutes were responsible for pollutant degradation within horizontal CW. The UV-visible spectra and high-resolution liquid chromatograph mass spectrometer (HR-LCMS) analysis confirmed that dye degradation intermediates generated from the breakage of azo bonds were eliminated in vertical CW with high redox conditions. The results of the phytotoxicity and fish toxicity experiments demonstrated a substantial toxicity reduction in the CW system-treated effluent.

Removal and reduction mechanism of Cr (VI) in Leersia hexandra Swartz constructed wetland-microbial fuel cell coupling system

Cr (VI) is extremely harmful to both the environment and human health, and it can linger in the environment for a very long period. In this research, the Leersia hexandra Swartz constructed wetland-microbial fuel cell (CW-MFC) system was constructed to purify Cr (VI) wastewater. By comparing with the constructed wetland (CW) system, the system electricity generation, pollutants removal, Cr enrichment, and morphological transformation of the system were discussed. The results demonstrated that the L. hexandra CW-MFC system promoted removal of pollutants and production of electricity of the system. The maximum voltage of the system was 499 mV, the COD and Cr (VI) removal efficiency was 93.73% and 97.00%. At the same time, it enhanced the substrate and L. hexandra ability to absorb Cr and change it morphologically transformation. Additionally, the results of XPS and XANES showed that the majority of the Cr in the L. hexandra and substrate was present as Cr (III). In the L. hexandra CW-MFC system, Geobacter also functioned as the primary metal catabolic reducing and electrogenic bacteria. As a result, L. hexandra CW-MFC system possesses the added benefit of removing Cr (VI) while producing energy compared to the traditional CW system.

Carbide lime as substrates to boost energy recuperation and dyestuff removal in constructed wetland-microbial fuel cell integrated with copper oxide/carbon cloth cathode

Methylene blue (MB) was regarded as a highly toxic and hazardous substance owing to its irreparable hazard and deplorable damage on the ecosystem and the human body. The treatment of this colorant wastewater appeared to be one of the towering challenges in wastewater treatment. In this study, a microbial fuel cell coupled with constructed wetland (CW-MFC) with effective MB elimination and its energy recuperation concurrently based on the incorporation of carbide lime as a substrate in a new copper oxide-loaded on carbon cloth (CuO/CC) cathode system was studied. The crucial influencing parameters were also delved, and the MB degradation and chemical oxygen demand (COD) removal efficiencies were correspondingly incremented by 97.3% and 89.1% with maximum power output up to 74.1 mW m-2 at optimal conditions (0.2 g L-1 carbide lime loading and 500 Ω external resistance). The carbide lime with high calcium ion content was greatly conducive for the enrichment of critical microorganism and metabolic activities. The relative abundances of functional bacteria including Proteobacteria and Actinobacteriota were vividly increased. Moreover, the impressive results obtained in printed ink wastewater treatment with a COD removal efficiency of 81.3% and a maximum power density of 58.2 mW m-2, which showcased the potential application of CW-MFC.

Research progress in the degradation of printing and dyeing wastewater using chitosan based composite photocatalytic materials

The surge in economic growth has spurred the expansion of the textile industry, resulting in a continuous rise in the discharge of printing and dyeing wastewater. In contrast, the photocatalytic method harnesses light energy to degrade pollutants, boasting low energy consumption and high efficiency. Nevertheless, traditional photocatalysts suffer from limited light responsiveness, inadequate adsorption capabilities, susceptibility to agglomeration, and hydrophilicity, thereby curtailing their practical utility. Consequently, integrating appropriate carriers with traditional photocatalysts becomes imperative. The combination of chitosan and semiconductor materials stands out by reducing band gap energy, augmenting reactive sites, mitigating carrier recombination, bolstering structural stability, and notably advancing the photocatalytic degradation of printing and dyeing wastewater. This study embarks on an exploration by initially elucidating the technical principles, merits, and demerits of prevailing printing and dyeing wastewater treatment methodologies, with a focal emphasis on the photocatalytic approach. It delineates the constraints encountered by traditional photocatalysts in practical scenarios. Subsequently, it comprehensively encapsulates the research advancements and elucidates the reaction mechanisms underlying chitosan based composite materials employed in treating printing and dyeing wastewater. Finally, this work casts a forward-looking perspective on the future research trajectory of chitosan based photocatalysts, particularly in the realm of industrial applications.

Actas Pink-2B dye removal in biochar nanocomposites augmented vertical flow constructed wetland (VF-CWs)

Industries generate hazardous dye wastewater, posing significant threats to public health and the environment. Removing dyes before discharge is crucial. The ongoing study primarily focused on synthesizing, applying, and understanding the mechanism of green nano-biochar composites. These composites, including zinc oxide/biochar, copper oxide/biochar, magnesium oxide/biochar, and manganese oxide/biochar, are designed to effectively remove Actas Pink-2B (Direct Red-31) in conjunction with constructed wetlands. Constructed wetland maintained pH 6.0-7.9. At the 10th week, the copper oxide/biochar treatment demonstrated the highest removal efficiency of total suspended solids (72%), dissolved oxygen (7.2 mg/L), and total dissolved solids (79.90%), followed by other biochar composites. The maximum removal efficiency for chemical oxygen demand (COD) and color was observed at a retention time of 60 days. The electrical conductivity also followed the same order, with a decrease observed up to the 8th week before becoming constant. A comprehensive statistical analysis was conducted, encompassing various techniques including variance analysis, regression analysis, correlation analysis, and principal component analysis. The rate of color and COD removal followed a second-order and first-order kinetics, respectively. A significant negative relationship was observed between dissolved oxygen and COD. The study indicates that employing biochar composites in constructed wetlands improves textile dye removal efficiency.

Critical evaluation of electroactive wetlands: traditional and modern advances

In the field of sustainable wastewater management, electroactive wetlands (EW), or constructed wetland-microbial fuel cells (CW-MFC), are an emerging technology. With the growing problem of untreated wastewater, the emphasis must shift to decentralisation of wastewater treatment infrastructure, and CW-MFC can be an excellent choice. This review provides a chronologically organized account of the design and configuration of CW-MFCs developed between 2010 and 2023. The research on CW-MFC has mainly focused on material, positioning and number of electrodes; use of electroconductive media and filler materials; flow regime; algal-based CW-MFC and multistage setups. Compared to traditional constructed wetlands (CW) and microbial fuel cells (MFC), CW-MFCs have a number of advantages, including better treatment efficiency, faster organic matter utilisation, lower capital and land requirements and a smaller carbon footprint. However, there are some limitations as well, such as upscaling and viable electricity generation, which are covered in more detail in the article. Moreover, the economics of this technology is also evaluated. The microbiology of a CW-MFC and its influence on its performance are also elaborated. Recent advancements in this field in terms of design, configuration and performance are discussed. Finally, the knowledge gaps that must be addressed before this technique can be successfully implemented on a large scale are highlighted, along with specific recommendations. This article aims to advocate for EWs as an ideal decentralised wastewater treatment technique, while also shedding light on the areas that still need to be worked on.

Enzyme-triggered approach to reduce water bodies' contamination using peroxidase-immobilized ZnO/SnO2/alginate nanocomposite

Enzyme immobilization on solid support offers advantages over free enzymes by overcoming characteristic limitations. To synthesize new stable and hyperactive nano-biocatalysts (co-precipitation method), ginger peroxidase (GP) was surface immobilized (adsorption) on ZnO/SnO2 and ZnO/SnO2/SA nanocomposite with immobilization efficacy of 94 % and 99 %, respectively. Thereafter, catalytic and biochemical characteristics of free and immobilized GP were investigated by deploying various techniques, i.e., FTIR, PXRD, SEM, and PL. Diffraction peaks emerged at 2θ values of 26°, 33°, 37°, 51°, 31°, 34°, 36°, 56°, indicating the formation of SnO2 and ZnO. The OH stretching of the H2O molecules was attributed to broad peaks between 3200 and 3500 cm-1, whereas ZnO/SnO2 spikes occurred in the 1626-1637 cm-1 range. SnO stretching mode and ZnO terminal vibrational patterns have been verified at corresponding wavelengths of 625 cm-1 and 560 cm-1. Enzyme entrapment onto substrate was verified via interactions between GP and ZnO/SnO2/SA as corroborated by signals beneath 1100 cm-1. GP-immobilized fractions were optimally active at pH 5, 50 °C, and retained maximum activity after storage of 4 weeks at -4 °C. Kinetic parameters were determined by using a Lineweaver-Burk plot and Vmax for free GP, ZnO/SnO2/GP and ZnO/SnO2/SA/GP with guaiacol as a substrate, were found to be 322.58, 49.01 and 11.45 (μM/min) respectively. A decrease in values of Vmax and KM indicates strong adsorption of peroxidase on support and maximum affinity between nano support and enzyme, respectively. For environmental remediation, free ginger peroxidase (GP), ZnO/SnO2/GP and ZnO/SnO2/SA/GP fractions effectively eradicated highly intricate dye. Multiple scavengers had a significant impact on the depletion of the dye. In conclusion, ZnO/SnO2 and ZnO/SnO2/SA nanostructures comprise an ecologically acceptable and intriguing carrier for enzyme immobilization.

Simultaneous removal of refractory organic pollutants and nitrogen using electron shuttle suspended biofilm carriers in an integrated hydrolysis/acidification-anoxic/aerobic process

Azo dyes wastewater contains refractory pollutant and nitrogen, which threatens human health and ecological environment when discharged into environment directly. Electron shuttle (ES) is able to participate in the extracellular electron transfer, and thus enhances the removal efficiency of refractory pollutant. However, the continuous dosing of soluble ES would rise operation cost and cause contamination inevitably. In this study, a type of insoluble ES (carbonylated graphene oxide (C-GO)) was developed and melt blended into polyethylene (PE) to prepare novel C-GO-modified suspended carriers. Compared to those of conventional carrier (31.60%), the surface active sites of novel C-GO-modified carrier increased to 52.95%. An integrated hydrolysis/acidification (HA, filled with C-GO-modified carrier) - anoxic/aerobic (AO, filled with clinoptilolite-modified carrier) process was applied to remove azo dye acid red B (ARB) and nitrogen simultaneously. ARB removal efficiency was significantly improved in the reactor filled with C-GO-modified carriers (HA2) compared to the reactor filled with conventional PE carriers (HA1) or activated sludge (HA0). Total nitrogen (TN) removal efficiency of the proposed process increased by 25.95-32.64% compared to the reactor filled with activated sludge. Moreover, the intermediates of ARB were identified by liquid chromatograph-mass spectrometer (LC-MS), and the degradation pathway of ARB through ES was proposed. C-GO-modified carriers induced ARB-removal-related bacterial enrichment (such as Chloroflexi, Lactivibrio, Longilinea, Bacteroidales and Anaerolineaceae). Besides, the relative abundance of denitrifiers and nitrifiers in the AO reactor filled with clinoptilolite-modified carrier was increased by 11.60% compared with activated sludge. Copy numbers of genes related to membrane transport, carbon/energy metabolism and nitrogen metabolism increased significantly on the surface-modified carriers. This study proposed an efficient approach for simultaneous azo dyes and nitrogen removal, showing potential in actual application.

Green metal oxides coated biochar nanocomposites preparation and its utilization in vertical flow constructed wetlands for reactive dye removal: Performance and kinetics studies

Major causes of water pollution in the ecosystem are pollutants such as dyes which are noxious. The present study was based on the synthesis of the green nano-biochar composites from cornstalk and green metal oxide resulting in Copper oxide/biochar, Zinc oxide /biochar, Magnesium oxide/biochar, Manganese oxide/biochar, biochar for removal of dyes combined with the constructed wetland (CW). Biochar Augmentation in constructed wetland systems has improved dye removal efficiency to 95% in order of copper oxide/biochar > Magnesium oxide/biochar > Zinc oxide/biochar > Manganese oxide/biochar > biochar > control (without biochar) respectively in wetlands. It has increased the efficiency of pH by maintaining pH 6.9-7.4, while Total Suspended Solids (TSS) removal efficiency and Dissolved oxygen (DO) increased with the hydraulic retention time of about 7 days for 10 weeks. Chemical oxygen demand (COD) and colour removal efficiency increased with the hydraulic retention time of 12 days for 2 months and there was a low removal efficiency for total dissolved solids (TDS) from control (10.11%) to Copper oxide /biochar (64.44%) and Electrical conductivity (EC) from control (8%) to Copper oxide /biochar (68%) with the hydraulic retention time of about 7 days for 10 weeks. Colour and chemical oxygen demand removal kinetics followed second and first-order kinetic. A significant growth in the plants were also observed. These results proposed the use of agricultural waste-based biochar as part of a constructed wetland substratum can provide enhanced removal of textile dyes. That can be reused.

Fe, N, S co-doped cellulose paper carbon fibers as an air-cathode catalyst for microbial fuel cells

The heteroatoms and transition metal co-doped carbon-based catalysts are an important way to improve the catalytic activity of oxygen reduction reaction (ORR). Herein, we reported a facile method to obtain iron, nitrogen, and sulfur co-doped cellulose paper carbon fibers as catalysts (Fe-N-S/CFs) for ORR in microbial fuel cells (MFCs) with the adsorption recovery of Congo red molecules from dye wastewater. The thermal treatment promoted the etching of carbon surface by ferric ions, resulting in increased surface roughness for forming the defective carbon structure. The rich active species and defective carbon formed on the etched surface to enhance the electroactive surface area and effective sites. Fe-N-S/CFs catalysts achieved high half-wave potential due to the synergy effect between chemical components and defect structures. The assembled single-chamber air cathode MFC gained a high maximum power density of 1773 ± 40 mW m^-2 versus Pt/C MFC of 1325 ± 94 mW m^-2. This work provides a strategy for recovering dye molecules from wastewater to prepare non-precious metal catalysts for enhancing ORR activity.

Low salinity enhances azo dyes degradation in aerobic granular sludge systems: Performance and mechanism analysis

The biodegradation performance of azo dyes can be enhanced under low salinity conditions, but the internal biodegradation mechanism is still unclear. Aerobic granular sludge (AGS), a salt-tolerant biological wastewater treatment technology, was used in this study to explore the enhancement mechanism of acid orange 7 (AO7) degradation at low salinity level (1.0 %). Results indicated that the AGS structure and reactor performance were almost unaffected by different AO7 concentrations (5-10 mg/L). Compared with salt-free conditions, the AO7 removal efficiency was elevated by 9.9 %-19.0 % at 1.0 % salinity level, owing to the enrichment of AO7 decolorizing bacteria (e.g. Acinetobacter) and functional enzymes (e.g. FMN-dependent azoreductase). The up-regulated genes involving in the key metabolic functions (e.g. carbon metabolism and oxidative phosphorylation) promoted the electron and energy production, thereby facilitating the AO7 decolorization and degradation. These results aid understanding of the enhancement mechanism of AO7 biodegradation under low salinity conditions from macroscopic and microscopic perspectives.

New outlook on hazardous pollutants in the wastewater environment: Occurrence, risk assessment and elimination by electrodeionization technologies

Over the decades, water contamination has increased substantially and has become a severe global issue. Degradation of natural resources is taking place at an alarming rate as a result of the use of chemicals like dyes, heavy metals, fertilizers, pesticides, and many more, necessitating the development of long-term pollution remediation methods/technologies. As a new development in the field of environmental engineering, electrodeionization incorporates both traditional ion exchange and electrodialysis. This communication provides an overview of hazardous contaminants such as dyes, heavy metals, fertilizers, and pesticides, as well as their converted forms, which are present in water. It highlights the risks of water pollutants to public health and the environment. Various electrochemical methods with a focus on electrodeionization for the treatment of wastewater and removal of hazardous contaminants are outlined in this review. Additionally, this review discusses the challenges and the future outlook for the development in this field of research.

Insights into the decolorization of mono and diazo dyes in single and binary dyes containing wastewater and electricity generation in up-flow constructed wetland coupled microbial fuel cell

The treatment of single and binary azo dyes, as well as the effect of the circuit connection, aeration, and plant on the performance of UFCW-MFC, were explored in this study. The decolorization efficiency of Remazol Yellow FG (RY) (single dye: 98.2 %; binary dye: 92.3 %) was higher than Reactive Black 5 (RB5) (single: 92.3 %; binary: 86.7 %), which could be due to monoazo dye (RY) requiring fewer electrons to break the azo bond compared to the diazo dye (RB5). In contrast, the higher decolorization rate of RB5 in binary dye indicated the removal rate was affected by the electron-withdrawing groups in the dye structure. The closed circuit enhanced about 2% of color and 4% of COD removal. Aeration improved the COD removal by 6%, which could be contributed by the mineralization of intermediates. The toxicity of azo dyes was reduced by 11-26% and the degradation pathways were proposed. The dye removal by the plants was increased with a higher contact time. RB5 was more favorable to be uptook by the plant as RB5 holds a higher partial positive charge. 127.39 (RY), 125.82 (RB5), and 58.66 mW/m³ (binary) of maximum power density were generated. The lower power production in treating the binary dye could be due to more electrons being utilized for the degradation of higher dye concentration. Overall, the UFCW-MFC operated in a closed circuit, aerated, and planted conditions achieved the optimum performance in treating binary azo dyes containing wastewater (dye: 87-92%; COD: 91%) compared to the other conditions (dye: 83-92%; COD: 78-87%).

The in-depth revelation of the mechanism by which a downflow Leersia hexandra Swartz constructed wetland-microbial fuel cell synchronously removes Cr(VI) and p-chlorophenol and generates electricity

The composite pollution by Cr(VI) and p-chlorophenol (4-CP) has high toxicity and harms water safety. However, research on the effective removal of Cr(VI) and 4-CP composite-polluted wastewater (C&P) and efficient synchronous electricity generation with reclaimed resources is limited. In this study, a downflow Leersia hexandra constructed wetland-microbial fuel cell (DLCW-MFC) was builded to treat C&P, as well as wastewater singularly polluted by Cr(VI) (SC) and 4-CP (SP), respectively, to reveal the mechanism by which DLCW-MFC treats C&P and synchronously generates electricity. The results demonstrate that the cathode layer had a stronger removal effect on pollutants than the middle layer and anode zone layer. Moreover, SC and SP had stronger pollutant removal effects than C&P. Cr(VI) had more competitive with electrons than 4-CP, and they had a synergistic effect on efficient electricity generation. The L.hexandra in SC and SP had a better growth state and lower Cr enrichment concentration than that in C&P. Cr existed in the DLCW-MFC mainly in the form of Cr(III). Gas chromatography-mass spectrometry was used to investigate the degradation pathway of 4-CP in C&P, and indicated that Phenol, 2,4-bis(1,1-dimethylethyl)- and benzoic acid compounds were the main intermediates formed at the cathode, and further mineralized to form medium-long-chain organic compounds to form CO₂. The microbial community distribution results revealed that Simplicispira, Cloacibacterium, and Rhizobium are associated with Cr(VI) removal and 4-CP degradation, and were found to be rich in the cathode of C&P. The anode of C&P was found to have more Acinetobacter (1.34%) and Spirochaeta (4.83%) than SC and SP, and the total relative abundance of electricigens at the anode of C&P (7.46%) was higher than that at the anodes of SC and SP. This study can provide a theoretical foundation for the DLCW-MFC to treat heavy metal and chlorophenol composite-polluted wastewater and synchronously generate electricity.

Refractory azo dye wastewater treatment by combined process of microbial electrolytic reactor and plant-microbial fuel cell

An innovative design of microbial electrolytic reactor (MER) coupled with Ipomoea aquaticaForsk. plant microbial fuel cell (IAF-PMFC) was developed for azo dye wastewater treatment and electricity generation. This study aims to assess the sequential degradation of azo dye and the feasibility of energy self-sufficiency in the MER/IAF-PMFC system. The decomposition of azo dye into aromatic amines and dye decolorization occurred in the MER at high hydraulic loading of 0.28 m³/(m²·d), while dye intermediates were mainly mineralized in the IAF-PMFC at low hydraulic loading of 0.06 m³/(m²·d). The final decolorization efficiency and COD removal of the combined system reached 99.64% and 92.06% respectively, even at influent dye concentration of 1000 mg/L. The effects of open/closed circuit conditions, presence/absence of aquatic plant and different cathode areas on the performance of the IAF-PMFC for treating the effluent of the MER were systematically tested, and the results showed that closed-circuit condition, plant involvement and larger cathode area were more beneficial to decolorization, detoxification and mineralization of dye wastewater, bioelectricity output, plant growth and photosynthetic rate. The power consumption by the MER was 0.0163 kWh/m³ of dye wastewater, while the highest power generation of the IAF-PMFC reached 0.0183 kWh/m³. The current efficiency of the MER for dye decolorization was as high as 942.83%, while the maximum coulombic efficiency of the IAF-PMFC for intermediates metabolism was only 6.30%, which still had much space of bioelectricity generation promotion. The MER/IAF-PMFC technology can simultaneously realize refractory wastewater treatment and balance of electricity production and consumption.

Azo dyes degradation by microorganisms - An efficient and sustainable approach

Synthetic aromatic compounds consisting of various functional groups are known as dyes. These colored compounds are often discharged in effluents, and they are very dangerous to aquatic life. Basically, the dye industry started by using natural plant and insect sources, and then suddenly turned into artificial manufacturing. Natural equilibrium of our environment gets changed by the reduction in photosynthetic activity due to the dyes. In China 900,000 tons of all kinds of dyes are usually produced, which are used in many industries like food, textile, food, paper and leather. Untreated wastewater contaminates aquatic bodies by causing eutrophication, change in water color, oxygen depletion which affect aquatic organisms to a great extent. Dye wastewater is now the key environmental pollution form. In recent eras an extensive study line has been developed to explore the dye decolorization and biodegradation under both aerobic as well as anaerobic conditions. In this review, the chemistry, toxicity and microbial biodegradation/decolorization are presented. Some recent studies along with the new techniques and methodologies of remediating the dye pollution are also discussed to provide the bases of their handling. Overall, efficient and high biodegradation potential make microbes an impending foundation for green chemistry to eradicate toxic dyes from industrial wastewater.

Interrelation between macrophytes roots and cathode in constructed wetland-microbial fuel cells: Further evidence

As an essential component in constructed wetland-microbial fuel cells (CW-MFC) system, the macrophytes play multiple roles in bioelectricity generation and decontaminants performance. However, the interrelation between macrophytes roots and cathode has not been fully investigated despite the fact that plant cultivation strategy is a critical issue in practice. For the first time, this study was designed to explore the interaction between macrophytes and cathode in CW-MFC by planting Cyperus altrnlifolius at relatively different positions from the cathode. The results showed that plants exhibited higher bioelectricity generation and dramatically improved pollution removal, as well as the improved richness and diversity of cathode microbes. More significantly, the relative locations between the plant roots and the cathode could lead to different cathode working patterns, while the optimal cathode pattern "plant root-assisted bio- & air-cathode" was formed when the plant roots are directly placed on the air-cathode layer in CW-MFC. The insight into the plant root and cathode relationship lies in whether the "multi-function cathode" can be established. This study contributes to increase the knowledge regarding the presence and behavior of plant roots and cathode throughout a CW-MFC system.

Monitoring and assessment of Dracaena-based constructed vertical flow wetlands treating textile dye wastewater

The monitoring and assessment of multiple constructed vertical flow wetlands (CVFWs) treating textile dye wastewater (metanil yellow as dye) are studied covering three seasons. Three CVFWs (CVFW-1, dye-5 mg/l; CVFW-2, dye-50 mg/l; and CVFW-3, dye-100 mg/l) and a control (dye-5 mg/l) were used. The CVFWs with Dracaena (an ornamental plant) efficiently removed contaminants like dye, COD, NH4+-N, and PO43--P from the wastewater under varying inlet dye concentrations, indicating its dependence on meteorological conditions. Substantial dye removal was observed to be maximum in summer (control, 44.3%; CVFW-1, 75.1%; CVFW-2, 76.1%; CVFW-3, 46%), but lesser in winter (control, 45%; CVFW-1, 73.1%; CVFW-2, 76.8%; CVFW-3, 42.6%) and minimum in monsoon (control, 40.8%; CVFW-1, 63.5%; CVFW-2, 51.6%; CVFW-3, 37.1%), respectively. Efficiency was less in CVFW-3 as it observed plant stress due to higher inlet dye concentration. COD removal was higher in winter, followed by summer and monsoon. A first-order kinetic model was used to investigate the efficiency of the CVFW system w.r.t. contaminant removal. Various functional groups were characterized using Fourier transform infrared spectroscopy (FTIR) from the inlet and outlet water samples of different CVFWs. The Dracaena accumulated various elements and oxides during the treatment with no stress on its health. No effects on plant health highlight the suitability of Dracaena for textile wastewater treatment. The results were validated using statistical tools like the Mann-Whitney U test and principal component analysis (PCA).

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

Unravelling the biodegradation performance and mechanisms of acid orange 7 by aerobic granular sludge at different salinity levels

Azo dyes wastewater is characterized by high-salinity, however, the biodegradation performance and mechanisms of azo dyes by aerobic granular sludge (AGS) under different salinity levels are still unclear. Herein, the results showed that the reactor performance was almost unaffected at low-salinity levels (0.5%-1.0% salinity), and the removal efficiency of acid orange 7 (AO7) was increased by 2.6%-19.1%, possibly due to the excessive secretion of extracellular polymeric substances (EPS) and the enrichment of functional bacteria. Nevertheless, the microbial cell viability was negatively affected by high-salinity level (2.0% salinity), leading to the deterioration of AO7 and nutrient removal efficiencies. The AO7 removal was achieved by rapid adsorption and slow biodegradation. The biodegradation pathway indicated that AO7 was gradually mineralized in the AGS system through desulfurization, deamination, decarboxylation and hydroxylation. Altogether, this work provides an important reference for the application of AGS technology for treating saline azo dye wastewaters.

Mitigation of hazards and risks of emerging pollutants through innovative treatment techniques of post methanated distillery effluent - A review

Distillery wastewater has high biological and chemical oxygen demand and requires additional treatment before it can be safely discharged into receiving water. It is usually processed through a biomethanation digester and the end product is the post-methanated distillery effluent (PMDE). Research have shown that PMDE released by molasses-based distilleries is a hazardous effluent that can cause harm to the biota and the environment; it contains elevated amount of total dissolved solids (TDS), total suspended solids (TSS) and excess levels of persistent organic compounds (POPs), heavy metals, phenolic compounds, and salts. The practice of wastewater reuse for irrigation in many water scarce countries necessitates the proper treatment of PMDE before it is discharged into receiving water. Convention methods have been in practice for decades, but innovative technologies are needed to enhance the efficiency of PMDE treatment. Advance physical treatment such as membrane separation technology using graphene, ion-exchange and ultrafiltration membranes; chemical treatment such as advanced oxidation methods, electrocoagulation and photocatalytic technologies; biological treatment such as microbial and enzymatic treatment; and hybrid treatment such as microbial-fuel cell (MFC), genetically modified organisms (GMO) and constructed wetland technologies, are promising new methods to improve the quality of PMDE. This review provides insight into current accomplishments evaluates their suitability and discusses future developments in the detoxification of PMDE. The consolidated knowledge will help to develop a better management for the safe disposal and the reuse of PMDE wastewater.

Construction of double tube granular sludge microbial fuel cell and its characteristics and mechanism of azo dye degradation

Microbial fuel cells (MFCs) can obtain electrical energy from extensive organic matter and complete wastewater treatment at the same time. The principal purpose of the research is to find a solution to the biodegradation of X-3B in a double tube MFC with graphite fiber brush as the anode and carbon cloth as the cathode. The anaerobic, aerobic, and electrochemical processes in the MFC were investigated. The effects of dye concentration and circuit connectivity on the performances of MFCs were explored. The degradation efficiency of X-3B in the anode region (85.56%) was higher than that in the cathode region (14.16%) within 24 h under the optimal voltage of 0.43 V, indicating a synergistic effect between electrode reaction and biodegradation. The power density increased from 12.12 mW/m³ to 60.45 mW/m³ with the addition of X-3B from 50 to 200 mg/L, because of the reduced ohmic and polarization resistance. Intermediate productions such as aniline were manufactured with the conjugated double bond of X-3B broken, and the intermediates were degraded into small molecular products like phenol during further degradation processes. Moreover, dye concentration and circuit connection had significant effects on the relative abundance of the microbial community at phylum and genus levels. In general, MFC is a good approach to energy generation and azo dye treatment at the same time.

Degradation of acid red 73 wastewater by hydrodynamic cavitation combined with ozone and its mechanism

Many azo dyes are consumed in the textile and dyeing industry, which makes the wastewater recalcitrant and toxic to the aquatic environment. Dye degradation by the combination of hydrodynamic cavitation and ozone (HC + O₃) has caused extensive interest. The degradation mechanism of the hybrid system needs further investigation. This study investigated the degradation of acid red 73 (AR73) by HC + O₃. Meanwhile, the degradation pathways and mechanisms were present. The optimal operation parameters were: inlet pressure of 0.15 MPa, O₃ dosage of 45 mg/min, initial dye concentration of 10 mg/L, and initial pH at 7.5. As a result, the decolorization rate, removal of UV₂₅₄ and NH₃-N were 100%, 71.28%, and 87.36% in 30 min, respectively. Humic acid and most of the co-existing anions (HCO₃^-, SO₄^2-, Cl^-, PO₄^3-, NO₃^-) played a positive role in the degradation of AR73, while NO₂^- restrained. The reactive species of singlet oxygen (¹O₂), hydroxyl radicals (·OH) and super oxygen radicals (·O₂^-) showed synergism in the hybrid system, and the decolorization was attributed to the fracture of azo bonds by ¹O₂. Meanwhile, aromatic amines were generated and further degraded into small molecule compounds. The research certificated that the HC + O₃ can be an effective technology for azo dye degradation.

Microbial fuel cells for mineralization and decolorization of azo dyes: Recent advances in design and materials

Microbial fuel cells (MFCs) exhibit tremendous potential in the sustainable management of dye wastewater via degrading azo dyes while generating electricity. The past decade has witnessed advances in MFC configurations and materials; however, comprehensive analyses of design and material and its association with dye degradation and electricity generation are required for their industrial application. MFC models with high efficiency of dye decolorization (96-100%) and a wide variation in power generation (29.4-940 mW/m²) have been reported. However, only 28 out of 104 studies analyzed dye mineralization - a prerequisite to obviate dye toxicity. Consequently, the current review aims to provide an in-depth analysis of MFCs potential in dye degradation and mineralization and evaluates materials and designs as crucial factors. Also, structural and operation parameters critical to large-scale applicability and complete mineralization of azo dye were evaluated. Choice of materials, i.e., bacteria, anode, cathode, cathode catalyst, membrane, and substrate and their effects on power density and dye decolorization efficiency presented in review will help in economic feasibility and MFCs scalability to develop a self-sustainable solution for treating azo dye wastewater.

A mini review on bio-electrochemical systems for the treatment of azo dye wastewater: State-of-the-art and future prospects

Azo dyes are typical toxic and refractory organic pollutants widely used in the textile industry. Bio-electrochemical systems (BESs) have great potential for the treatment of azo dyes with the help of microorganisms as biocatalysts and have advanced significantly in recent years. However, the latest and significant advancement and achievements of BESs treating azo dyes have not been reviewed since 8 years ago. This review thus focuses on the recent investigations of BESs treating azo dyes from the year of 2013-2020 in order to broaden the knowledge and deepen the understanding in this field. In this review, azo dyes degradation mechanisms of BESs are first elaborated, followed by the introduction of BES configurations with the emphasis on the novelties. The azo dye degradation performance of BESs is then presented to demonstrate their effectiveness in azo dye removal. Effects of various operating parameters on the overall performance of BESs are comprehensively elucidated, including electrode materials, external resistances and applied potentials, initial concentrations of azo dyes, and co-substrates. Predominant microorganisms responsible for degradation of azo dyes in BESs are highlighted in details. Furthermore, the combination of BESs with other processes to further improve the azo dye removal are discussed. Finally, an outlook on the future research directions and challenges is provided from the viewpoint of realistic applications of the technology.

Enhanced degradation capability of white-rot fungi after short-term pre-exposure to silver ion: Performance and selectively antimicrobial mechanisms

Azo dyes in wastewater have great threats to environment and human health. White-rot fungi (WRF) have broad-spectrum potential for such refractory organics bioremediation; however, their applications are largely restrained by the poor viability owning to microbial invasion under non-sterile conditions. In this study, short-term pre-exposure to silver ion (Ag⁺) was demonstrated to be a practical, economic, and green method to enhance the perdurability of azo dyes decoloration by WRF Phanerochaete chrysosporium under non-sterile conditions. In control (without Ag⁺ pre-exposure), decoloration deactivated since cycle 7 (<10%), whereas in Ag⁺ pre-exposure groups, the decoloration ratios remained 91.5%-94.7% after 7 cycles. Variations in decoloration-related extracellular lignin enzyme activities were consistent with the decoloration effectiveness. The enhanced decoloration capability in Ag⁺ pre-exposure groups under non-sterile conditions could be ascribed to the selectively antimicrobial action by Ag⁺. The released Ag⁺ from the self-assembled silver nanoparticles (AgNPs) could selectively "stimulate" the proliferation and viability of P. chrysosporium, and simultaneously inhibit the growths of invasive microorganisms. The pyrosequencing results indicated that genus Sphingomonas (24.1%-31.3%) was the main invasive bacteria in Ag⁺ pre-exposure groups after long-term operation owing to the AgNPs passivation. As control, the invasive fungi (Asterotremella humicola) and bacteria (Burkholderia spp.) occurred in control after short-term operation, and genus Burkholderia (74.9%) dominated after long-term operation, leading to decoloration deactivation. Overall, these findings offer a new insight into the bio-nano interactions between WRF and invasive microorganisms in response to Ag⁺ or biogenic AgNPs, and could extend WRF application perspective under non-sterile conditions in future.

Functionalizing biochar by Co-pyrolysis shaddock peel with red mud for removing acid orange 7 from water

Biochar modification by metal/metal oxide is promising for improving its adsorption capability for contaminants, especially the anions. However, conventional chemical modifications are complicated and costly. In this study, novel Fe/Fe oxide loaded biochars (RMBCs) were synthesized from a one-step co-pyrolysis of red mud (RM) and shaddock peel (SP), and their potential application for removing anionic azo dye (acid orange 7, AO7) from the aqueous environment was evaluated. Fe from red mud was successfully loaded onto biochars pyrolyzed at 300-800 °C, which presented from oxidation form (Fe₂O₃) to the reduction forms (FeO and Fe⁰) with increasing pyrolysis temperature. The RMBC produced at 800 °C with RM:SP mass ratio of 1:1 (RMBC800_1:1) exhibited the best capability for AO7 removal (∼32 mg/g), attributed to both adsorption and degradation. The higher surface area of RMBC800_1:1 and its greater affinity for AO7 led to the higher adsorption. In addition, RMBC800_1:1-induced degradation of AO7 was another key mechanism for AO7 removal. The reduction forms of Fe (FeO or Fe⁰) in RMBC800_1:1 may provide electrons for breaking down the azo bond in AO7 molecules and result in degradation, which is further enhanced in acid conditions due to the participation of readily release of Fe²⁺ and the available H⁺ in AO7 degradation. Furthermore, RMBC800_1:1 can be easily separated from the treated water by using magnetic field, which significantly benefits its separation in wastewater treatment.

Improvement of zero waste sustainable recovery using microbial energy generation systems: A comprehensive review

Microbial energy generation systems, i.e., bioelectrochemical systems (BESs) are promising sustainable technologies that have been used in different fields of application such as biofuel production, biosensor, nutrient recovery, wastewater treatment, and heavy metals removal. However, BESs face great challenges such as large-scale application in real time, low power performance, and suitable materials for their configuration. This review paper aimed to discuss the use of BES systems such as conventional microbial fuel cells (MFCs), as well as plant microbial fuel cell (P-MFC), sediment microbial fuel cell (S-MFC), constructed wetland microbial fuel cell (CW-MFC), osmotic microbial fuel cell (OsMFC), photo-bioelectrochemical fuel cell (PBFC), and MFC-Fenton systems in the zero waste sustainable recovery process. Firstly, the configuration and electrode materials used in BESs as the main sources to improve the performance of these technologies are discussed. Additionally, zero waste recovery process from solid and wastewater feedstock, i.e., energy recovery: electricity generation (from 12 to 26,680 mW m^-2) and fuel generation, i.e., H₂ (170 ± 2.7 L^-1 L^-1 d^-1) and CH₄ (107.6 ± 3.2 mL^-1 g^-1), nutrient recovery of 100% (PO₄³-P), and 13-99% (NH₄⁺-N), heavy metal removal/recovery: water recovery, nitrate (100%), sulfate (53-99%), and sulfide recovery/removal (99%), antibiotic, dye removal, and other product recovery are critically analyzed in this review paper. Finally, the perspective and challenges, and future outlook are highlighted. There is no doubt that BES technologies are an economical option for the simultaneous zero waste elimination and energy recovery. However, more research is required to carry out the large-scale application of BES, as well as their commercialization.

Modeling RSM of photocatalytic treatment of Acid Red 18 pollutant using ZnO–Cr nano-photocatalyst, kinetic studies, and energy management

The ZnO–Cr nano-photocatalyst was synthesized using a microwave-assisted solution combustion method and applied for the photodegradation of the organic pollutant Acid Red 18 (AR18). The synthesized nano-photocatalyst was characterized by XRD, FESEM, EDX, and FTIR methods. To reach the optimal condition of the treatment, the response surface methodology was used in the central composite design model. The amount of nano-photocatalyst, pH of the solution, and initial concentration of the pollutant were optimized. The polynomial 3-degree model was fitted to the photodegradation data, and the correlation coefficients of the model showed an interaction between the parameters. Optimization of the polynomial model for pollutant treatment was investigated under the same conditions, and the comparison of the observed and predicted treatment models showed a low difference in decolorization. The intermediates were identified by liquid chromatography/mass spectrometry. A kinetic study showed that the first-order kinetic constant for the degradation of pollutant concentrations from 10 to 30 mg L−1 changed from 0.0178 to 0.0058 min–1. Finally, economic evaluation and energy management of the process showed that the decolorization process was more economical at low pollutant concentrations.

Innovative constructed wetland coupled with microbial fuel cell for enhancing diazo dye degradation with simultaneous electricity generation

A novel earthen separator-based dual-chambered unplanted core of constructed wetland coupled with microbial fuel cell was developed for studying the microbe-material interaction and their effect on treatment performance and electricity generation. The constructed wetland integrated microbial fuel cell was evaluated for the degradation of high molecular weight diazo Congo red dye as a model pollutant. The system exhibited 89.99 ± 0.04% of dye decolorization and 95.80 ± 0.71% of chemical oxygen demand removal efficiency from an initial concentration of 50 ± 10 mg/L and 750 ± 50 mg/L, respectively. Ultraviolet-Visible spectrophotometric and gas chromatography-mass spectrometric analysis revealed naphthalene and phenol as mineralized products. The developed system achieved high power density and current density generation of 235.94 mW/m³ and 1176.4 mA/m³, respectively. Results manifested that dual-chambered constructed wetland coupled with microbial fuel cell has a high capability of dye decolorization and toxicity abatement with appreciable simultaneous bioelectricity generation owing to the significantly low internal resistance of 100 Ω.

Mapping Research on Microbial Fuel Cells in Wastewater Treatment: A Co-Citation Analysis

Microbial fuel cells (MFCs) are promising technologies, aiming at treating different types of industrial and domestic wastewater. In recent years, more and more publications focusing on wastewater treatment have been published. Based on the retrieval of publications from Web of Science Core Collection database, the new emerging trends of microbial fuel cells in wastewater treatment was evaluated with a scientometric analysis method from 1995 to 2020. All publications downloaded from (WOS) were screened by inclusion criteria, and 2233 publications were obtained for further analysis. Document co-citation and burst detection of MFCs in wastewater treatment were analyzed and visualized by software of CiteSpace. Our study indicated that “Environmental Science” is the most popular discipline, while the journal of Bioresource Technology published the greatest quantity of articles in the field of MFCs applied wastewater treatment. China and the Chinese Academy of Science are the most productive country and institution, respectively. “Azo dye” has become the new research topic, which indicates the application area and the development of MFCs. The performance of MFCs for wastewater treatment has been widely discussed. The findings of this study may ameliorate the researcher in seizing the frontier of MFCs in wastewater treatment.

Current advances in microbial fuel cell technology toward removal of organic contaminants - A review

At present, water pollution and demand for clean energy are most pressing global issues. On a daily basis, huge quantity of organic wastes gets released into the water ecosystems, causing health related problems. The need-of-the-hour is to utilize proficient and cheaper techniques for complete removal of harmful organic contaminants from water. In this regard, microbial fuel cell (MFC) has emerged as a promising technique, which can produce useful electrical energy from organic wastes and decontaminate polluted water. Herein, we have systematically reviewed recently published results, observations and progress made on the applications of MFCs in degradation of organic contaminants, including organic synthetic dyes, agro pollutants, health care contaminants and other organics (such as phenols and their derivatives, polyhydrocarbons and caffeine). MFC-based hybrid technologies, including MFC-constructed wetland, MFC-photocatalysis, MFC-catalysis, MFC-Fenton process, etc., developed to obtain high removal efficiency and bioelectricity production simultaneously have been discussed. Further, this review assessed the influence of factors, such as nature of electrode catalysts, organic pollutants, electrolyte, microbes and operational conditions, on the performance of pristine and hybrid MFC reactors in terms of pollutant removal efficiency and power generation simultaneously. Moreover, the limitations and future research directions of MFCs for wastewater treatment have been discussed. Finally, a conclusive summary of the findings has been outlined.

Critical review on hazardous pollutants in water environment: Occurrence, monitoring, fate, removal technologies and risk assessment

Water is required for the existence of all living things. Water pollution has grown significantly, over the decades and now it has developed as a serious worldwide problem. The presence and persistence of Hazardous pollutants such as dyes, pharmaceuticals and personal care products, heavy metals, fertilizer and pesticides and their transformed products are the matter of serious environmental and health concerns. A variety of approaches have been tried to clean up water and maintain water quality. The type of pollutants present in the water determines the bulk of technological solutions. The main objective of this article was to review the occurrences and fate of hazardous contaminants (dyes, pharmaceuticals and personal care products, heavy metals, and pesticides) found in wastewater effluents. These effluents mingle with other streams of water and that are utilized for a variety of reasons such as irrigation and other domestic activities that is further complicating the issue. It also discussed traditional treatment approaches as well as current advances in hazardous pollutants removal employing graphite oxides, carbon nanotubes, metal organic structures, magnetic nano composites, and other innovative forms of useable materials. It also discussed the identification and quantification of harmful pollutants using various approaches, as well as current advancements. Finally, a risk assessment of hazardous pollutants in water is provided in terms of the human health and the environment. This data is anticipated to serve as a foundation for future improvements in hazardous pollutant risk assessment. Furthermore, future studies on hazardous pollutants must not only emphasize on the parent chemicals, as well as on their possible breakdown products in various media.

Resource utilization of organic spent adsorbent to prepare three-dimensional sulfate-functionalized layered double oxide for superior removal of azo dye

Developing superior, rapid, cost-effective adsorbents derived from organic spent adsorbent is an economically sustainable way for purifying azo dye wastewater. Herein, we report a precursor-calcination strategy for the recycle of the organic spent adsorbent to a high value-added three-dimensional sulfate-functionalized MgAl-layered double oxide (3S-LDO). Thanks to the unique property of the sulfate group and LDO, 3S-LDO exhibited a superior (4340.71 mg/g) and ultrafast (<1 h) adsorption toward methyl orange (MO, as the representative of azo dye). A thermodynamic study revealed that the reaction process was spontaneous and exothermic. FT-IR, XPS, and XRD results confirmed that the sulfate from 3S-LDO played a vital role in MO removal wherein the S=O bond (with the electrophilic character) from SO₄^2- interacted with the N=N double bond (with rich electron) in MO through the electron donor-acceptor mechanism. And the "memory effect" and surface complexation of 3S-LDO further strengthened the MO adsorption. More importantly, 3S-LDO could work efficiently in a wide pH range and even in the presence of competitive anions (e.g., Cl^-, NO₃^-, and CO₃^2-). Multiple cyclic runs and selective tests demonstrated the excellent reusability and explicit selectivity of 3S-LDO. This work not only provides a prospective sulfate-functionalized adsorbent from organic waste for rapid azo dye removal from wastewater but also achieves the high value-added utilization of organic waste.

Recent advancements in azo dye decolorization in bio-electrochemical systems (BESs): Insights into decolorization mechanism and practical application

Recent advances in bio-electrochemical systems (BESs) for azo dye removal are gaining momentum due to having electrode biocarrier and electro-active bacteria that could stimulate decolorization via extracellular electron transfer. Enhanced decolorization performance is observed in most laboratory studies, indicating the great potential of BESs as an alternative to the traditional biological processes or serving as a pre-/post-processing unit to improve the performance of biological processes. It is proven more competitive in environmental friendly than physicochemical methods. While, the successful application of BESs to azo dye-containing wastewater remediation requires a deeper evaluation of its performance, mechanism and typical attributes, and a comprehensive potential evaluation of BESs practical application in terms of economic analysis and technical optimizations. This review is organized to address BESs as a practical option for azo dye removal by analyzing the decolorization mechanisms and involved functional microorganisms, followed by the comparisons of device configurations, operational conditions, and economic evaluation. It further highlights the current hurdles and prospects for the abatement of azo dyes via BES related techniques.

A taxonomy of design factors in constructed wetland-microbial fuel cell performance: A review

The past decade has seen the rapid development of constructed wetland-microbial fuel cell (CW-MFC) technology in many aspects. The first publication on the combination of constructed wetland (CW) and microbial fuel cell (MFC) appeared in 2012, subsequently, research on the subject has grown exponentially to improve the performance of CW-MFCs in their dual roles of wastewater treatment and power generation. Although significant research has been conducted on this technology worldwide, a comprehensive and critical review of effective controlling parameters is lacking. More broadly, research is needed to draw up-to-date conclusions on recent developments and to identify knowledge gaps for further studies. This review paper systematically enumerates and reviews research studies published in this area to determine the key design factors and their role in CW-MFC performance. Moreover, a taxonomy of all CW-MFC design parameters has been synthesised from the literature. Importantly, this original work provides a comprehensive conceptual framework for future researchers, designers, builders, and users to understand CW-MFC technology. Within the taxonomy, parameters are placed in three main categories (physical/environmental, chemical, and biological/electrochemical) and comprehensive details are given for each parameter. Finally, a comprehensive summary of the parameters has been tabulated showing their impact on CW-MFC operation, design recommendations from literature, and the significant research gaps that this review has identified within the existing literature. It is hoped that this paper will provide a clear and rich picture of this technology at its current stage of development and furthermore, will facilitate a deeper understanding of CW-MFC performance for long-term and large-scale development.

Recent advances in the biodegradation of azo dyes

As dye demand continues to rapidly increase in the food, pharmaceutical, cosmetic, paper, textile, and leather industries, an industrialization increase is occurring. Meanwhile, the degradation and removal of azo dyes have raised broad concern regarding the hazards posed by these dyes to the ecological environment and human health. Physicochemical treatments have been applied but are hindered by high energy and economic costs, high sludge production, and chemicals handling. Comparatively, the bioremediation technique is an eco-friendly, removal-efficient, and cost-competitive method to resolve the problem. This paper provides scientific and technical information about recent advances in the biodegradation of azo dyes. It expands the biodegradation efficiency, characteristics, and mechanisms of various microorganisms containing bacteria, fungi, microalgae, and microbial consortia, which have been reported to biodegrade azo dyes. In addition, information about physicochemical factors affecting dye biodegradation has been compiled. Furthermore, this paper also sketches the recent development and characteristics of advanced bioreactors.

Exploration of Microbial Factories for Synthesis of Nanoparticles - A Sustainable Approach for Bioremediation of Environmental Contaminants

The nanomaterials synthesis is an intensifying research field due to their wide applications. The high surface-to-volume ratio of nanoparticles and quick interaction capacity with different particles make them as an attractive tool in different areas. Conventional physical and chemical procedures for development of metal nanoparticles become outmoded due to extensive production method, energy expenditure and generation of toxic by-products which causes significant risks to the human health and environment. Hence, there is a growing requirement to search substitute, non-expensive, reliable, biocompatible and environmental friendly methods for development of nanoparticles. The nanoparticles synthesis by microorganisms has gained significant interest due to their potential to synthesize nanoparticles in various sizes, shape and composition with different physico-chemical properties. Microbes can be widely applied for nanoparticles production due to easy handling and processing, requirement of low-cost medium such as agro-wastes, simple scaling up, economic viability with the ability of adsorbing and reducing metal ions into nanoparticles through metabolic processes. Biogenic synthesis of nanoparticles offers clean, non-toxic, environmentally benign and sustainable approach in which renewable materials can be used for metal reduction and nanoparticle stabilization. Nanomaterials synthesized through microbes can be used as a pollution abatement tool as they also contain multiple functional groups that can easily target pollutants for efficient bioremediation and promotes environmental cleanup. The objective of the present review is to highlight the significance of micro-organisms like bacteria, actinomycetes, filamentous fungi, yeast, algae and viruses for nanoparticles synthesis and advantages of microbial approaches for elimination of heavy metals, dyes and wastewater treatment.

Preparation and application of a novel biochar-supported red mud catalyst：Active sites and catalytic mechanism

A novel catalyst RM-BC_(HP) was synthesized by hydrothermal treatment and pyrolysis (800 ℃) using red mud and coconut shells. Influence of different preparation conditions on catalyst performance was explored. SEM showed that RM-BC_(HP) was porous and RM was successfully loaded on the outside surface and inside the pores of BC. XRD revealed that Fe₂O₃ in RM was reduced to Fe⁰ and Fe₃O₄ in the pyrolysis process, in which pyrolysis temperature and addition ratio of coconut shells were critical. TGA-MS, FT-IR and XPS were also applied to character the catalyst. 100% of AO7 was removed within 30 min with conditions of 2 mM PS, 50 mg/L AO7 and 0.5 g/L RM-BC_(HP), and the Fe leaching was negligible. High removal rate was obtained in tap, river, and lake water. RM-BC_(HP)/PS system also exhibited excellent degradation performance for other dyes (MB, MG and RhB) and antibiotics (TC, OTC and CTC). The mechanism studies demonstrated that PS was mainly activated by Fe⁰ and Fe²⁺ in RM-BC_(HP) to produce different radicals, then ¹O₂ was generated by the reactions among these radicals to degrade AO7. Finally, nine intermediate products of AO7 were identified by FT-ICR-MS and a probable degradation pathway was proposed.

Mapping the field of constructed wetland-microbial fuel cell: A review and bibliometric analysis

The embedding microbial fuel cell (MFC) into constructed wetlands (CW) to form CW-MFC bears the potential to obtain bioelectricity and a clean environment. In this study, a bibliometric analysis using VOSviewer based on Web of Science data was conducted to provide an overview by tracing the development footprint of this technology. The countries, institutions, authors, key terms, and keywords were tracked and corresponding mapping was generated. From 2012 to September 2020, 442 authors from 129 organizations in 26 countries published 135 publications in 42 journals with total citation of 3139 times were found. The key terms analysis showed four clusters: bioelectricity generation performance, mechanism study, refractory pollutants removal, and enhanced conventional contaminants removal. Further research themes include exploring the biochemical properties of electrochemically active bacteria, emerging contaminants removal, effective bioelectricity harvest and the use, and biosensor development as well as scaling-up for real field application. The bibliometric results provide valuable references and information on potential research directions for future studies.

Dual role of macrophytes in constructed wetland-microbial fuel cells using pyrrhotite as cathode material: A comparative assessment

In the recent years many studies have shown that wetland plants play beneficial roles in bioelectricity enhancement in constructed wetland-microbial fuel cell (CW-MFC) because of the exudation of root oxygen and root exudates. In this study, the long-term roles of plants on the bioelectricity generation and contaminant removal were investigated in multi-anode (Anode1 and Anode2) and single cathode CW-MFCs. The electrode distances were 20 cm between Anode1-cathode and 10 cm between Anode2-cathode, respectively. Additionally, the employment of natural conductive pyrrhotite mineral as cathode material was firstly investigated in CW-MFC system. A cathode potential of -98 ± 52 mV to -175 ± 60 mV was achieved in the unplanted (CW-MFC 1), and planted CW-MFCs with Iris pseudacorus (CW-MFC 2), Lythrum salicaria (CW-MFC 3), and Phragmites australis (CW-MFC 4). The maximum power densities of Anode1-cathode and Anode2-cathode were 8.23 and 15.29 mW/m² in CW-MFC 1, 8.51 and 1.67 mW/m² in CW-MFC 2, 5.67 and 3.15 mW/m² in CW-MFC 3, and 7.59 and 14.71 mW/m² in CW-MFC 4, respectively. Interestingly, smaller power density was observed at Anode2-cathode, which has shorter electrode distance than Anode1-cathode in both CW-MFC 2 and CW-MFC 3, which indicates the negative role of oxygen released from the flourished plant roots at Anode2 micro-environment in power production. Therefore, recovering power from commercial CW-MFCs with flourished plants will be a challenge. The contradiction between keeping short electrode distance and avoiding the interference from plant roots to maintain anaerobic anode may be solved by the proposed modular CW-MFCs.