A review of the application of adsorbents for landfill leachate treatment: Focus on magnetic adsorption

Photo-reductive decomposition of perfluorooctane sulfonate (PFOS) and its common alternatives by UV/VUV/sulfite process: Mechanism, kinetic modeling, and water matrix effects

The present study investigated the photo-reduction of perfluorooctane sulfonate (PFOS) and its alternatives, focusing on decomposition mechanisms, active species involvement, the influence of background water constituents, and kinetic model development. The decomposition and defluorination rates followed the order of PFOS > PFHxS > 6:2 FTSA > PFBS, with shorter chains and CH2 linkers enhancing the resistance of PFOS alternatives against the attack of hydrated electrons (eaq-). Two primary pathways were identified during the photodegradation of PFAS: (i) H/F exchange at CF bonds with the lowest bond dissociation energies (BDEs) and (ii) functional group cleavage followed by short-chain PFCAs formation, with OH playing a crucial role in transforming intermediates. Adding iodide and elevated temperatures demonstrated a synergistic effect on PFBS decomposition and defluorination, with high temperatures promoting functional group cleavage as the preferred defluorination pathway. The study examined the impact of background water constituents in different aqueous environments, from surface waters to wastewater streams and ion-exchange brine concentrates. Chloride exhibited a concentration-based dual impact on the UV/VUV/sulfite process: promotive effects at low dosages (1-10 mM) by acting as a secondary eaq- mediator, and adverse effects at high dosages (20-500 mM) due to the scavenging effect of generated chlorine radicals (Cl). High ionic strength adversely affected eaq- quantum efficiency. Additionally, bicarbonate and natural organic matter (NOM) had opposing effects on PFOS photo-reduction, primarily through eaq- scavenging and pH alteration. Kinetic modeling revealed reaction rate constants of the studied PFAS with eaq- ranging from 1.8 × 106 to 1.3 × 109 M-1 s-1, corroborating the concentration profiles of active species and highlighting the reductive nature of sulfite-mediated processes.

Constructed wetlands combined with microbial fuel cells (CW-MFCs) as a sustainable technology for leachate treatment and power generation

The physical and chemical treatment processes of leachate are not only costly but can also possibly produce harmful by products. Constructed wetlands (CW) has been considered a promising alternative technology for leachate treatment due to less demand for energy, economic, ecological benefits, and simplicity of operations. Various trends and approaches for the application of CW for leachate treatment have been discussed in this review along with offering an informatics peek of the recent innovative developments in CW technology and its perspectives. In addition, coupling CW with microbial fuel cells (MFCs) has proven to produce renewable energy (electricity) while treating contaminants in leachate wastewaters (CW-MFC). The combination of CW-MFC is a promising bio electrochemical that plays symbiotic among plant microorganisms in the rhizosphere of an aquatic plant that convert sun electricity is transformed into bioelectricity with the aid of using the formation of radical secretions, as endogenous substrates, and microbial activity. Several researchers study and try to find out the application of CW-MFC for leachate treatment, along with this system and performance. Several key elements for the advancement of CW-MFC technology such as bioelectricity, reactor configurations, plant species, and electrode materials, has been comprehensively discussed and future research directions were suggested for further improving the performance. Overall, CW-MFC may offer an eco-friendly approach to protecting the aquatic environment and come with built-in advantages for visual appeal and animal habitats using natural materials such as gravel, soil, electroactive bacteria, and plants under controlled condition.

Agricultural waste-based biochars for sustainable removal of heavy metals from stabilized landfill leachate

In this work, biochars were used as adsorbents to remove Cu, Cd, and Zn ions in a real stabilized leachate from a controlled landfill. Oak fruit shells biochar (OFSBC) and date palm fibers biochar (DPFBC) were obtained by pyrolysis of oak fruit shells and date palm fibers at 700 °C and 400 °C, respectively. OFSBC and DPFBC showed well-developed structures and high specific surface areas (520.16 m2/g and 470.46 m2/g, respectively). Equilibrium adsorption of heavy metal ions on DPFBC and OFSBC occurred after 4 h and 2 h of stirring. The removal efficiencies of Cu, Cd, and Zn ions were 97.01%, 94.40%, and 80.59% with DPFBC and 90.10%, 88.33%, and 76.16% using OFSBC, respectively. The Avrami fractional order model was appropriate for describing kinetic adsorption. Increasing the dose of adsorbent improves heavy metal ion retention. Thermodynamic tests have proven the spontaneous and endothermic adsorption of these heavy metals. The electrostatic attraction, ion exchange, complexation, metal-π bending, and surface precipitation and pore filling were regarded as the most predominant heavy metal retention mechanisms from the landfill leachate onto the biochar surface. Separately, the DPFBC showed the best performance than OFSBC regarding the improvement of leachate quality. Chemical oxygen demand (COD), biological oxygen demand (BOD5), ammoniacal nitrogen (NH3-N), and phosphorus (P) were respectively removed at an efficiency of 53.57%, 29.17%, 36.07%, and 37.5%, respectively. Thus, the results allow highlighting that the adsorption on DPFBC and OFSBC can be an effective alternative in the practice of landfill leachate treatment.

Enhanced in situ H2O2 electrosynthesis and leachate concentrate degradation through side-aeration and modified cathode in an electro-Fenton system

The active graphite felt (GF) catalytic layer was effectively synthesized through a wet ultrasonic impregnation-calcination method, modified with CB and PTFE, and implemented in a pioneering side-aeration electrochemical in-situ H2O2 reactor. The optimal mass ratio (CB: PTFE 1:4) for the modified cathode catalytic layer was determined using a single-factor method. Operating under optimum conditions of initial pH 5, 0.5 L/min air flow, and a current density of 9 mA/cm2, the system achieved a remarkable maximum H2O2 accumulation of 560 mg/L, with the H2O2 production capacity consistently exceeding 95 % over 6 usage cycles. The refined mesoporous structure and improved three-phase interface notably amplified oxygen transfer, utilization, and H2O2 yield. Side aeration led to an oxygen concentration near the cathode reaching 20 mg/L, representing a five-fold increase compared to the 3.95 mg/L achieved with conventional bottom aeration. In the final application, the reaction system exhibited efficacy in the degradation of landfill leachate concentrate. After a 60-minute reaction, complete removal of chroma was attained, and the TOC degradation rate surpassed 60 %, marking a sixfold improvement over the conventional system. These results underscore the substantial potential of the system in H2O2 synthesis and environmental remediation.

Enhanced performance and mechanism of adsorption pretreatment for alleviating membrane fouling in AGMBR: Impact of structural variations in carbon adsorbents

The structural variances of adsorbents play a crucial role in determining the number of effective adsorption sites and pretreatment performance. However, there is still a gap in comprehending the impact of different carbon structural adsorbents on membrane fouling. Therefore, this study aimed to compare the efficacy of granular activated carbon (GAC), powdered activated carbon (PAC), and activated carbon fiber (ACF) in mitigating membrane fouling during municipal sewage reclamation using an aerobic granular sludge membrane bioreactor (AGMBR). The results demonstrated that the utilization of PAC significantly enhanced the normalized flux and reduced fouling resistance in comparison to GAC and ACF systems. PAC effectively adsorbed low and medium-molecular-weight pollutants present in raw sewage, resulting in an increase in average particle size and a decrease in foulant content on the membrane surface. The Hermia model indicated that adsorption pretreatment minimized standard blocking while promoting the formation of a sparse and porous cake layer. Moreover, according to the extended Derjaguin-Landau-Verwey-Overbeek theory, PAC has been demonstrated as the optimal antifouling system owing to its enhanced repulsion between membrane-foulant and foulant-foulant interactions. Correlation analysis revealed that the exceptional antifouling performance of the PAC system was due to its high removal rates of chemical oxygen demand (~78 %) and suspended solids (~97 %). This research offers valuable insights into the mitigation of membrane fouling through the utilization of adsorbents featuring diverse carbon structures.

Removal of organic and inorganic effluents from wastewater by using degradation and adsorption properties of transition metal-doped nickel ferrite

Removal of water pollutants (methylene blue dye and heavy metals) was achieved by zinc/manganese-doped nickel ferrites (Ni1 - xMxFe2O4, where x = 0.00, 0.025, 0.10). Degradation of dye was achieved under natural solar light illumination. Degradation studies of dye were conducted under different parameters such as contact time-80 min, dye's concentration-5 mg/L, pH-7, and dosage of ferrites-15 mg. The adsorption of dye was studied using non-linear kinetics models (pseudo-first-order and pseudo-second-order) and isotherm models (Langmuir and Freundlich). The adsorption of dye followed pseudo-first-order kinetics (R2 = 0.99377) than second-order kinetics (R2 = 0.98063) and Langmuir isotherm model (R2 = 0.96095) than Freundlich model (R2 = 0.95962) with maximum adsorption efficiency of 29.62 mg/g. Doping of nickel ferrites caused an increase in the removal percentage of methylene blue dye (80 to 90%) and inorganic effluents (75 to 95% for lead and 47 to 82% for cadmium). In addition to this, band gap energy (2.43 to 3.26 eV) (UV-Vis spectroscopy), pore radius (65.2 to 74.8 A°), and specific surface area (16.45 to 27.95 m2/g) (BET analysis) were also increased. Generally, the results of the study revealed that synthesized nanoparticles can act as potential candidate for the removal of effluents from wastewater under optimum parameters along with recyclability, reusability, and separation under the influence of a magnetic field.

Utilizing sludge-based activated carbon for targeted leachate mitigation in wastewater treatment

Activated carbon (AC) based adsorbents derived from waste sludge were utilized to remediate mixed contaminants in wastewater as an integrated waste-to-resource approach promoting a paradigm shift in management of refuse sludge and wastewater. This review specifically focuses on the remediation of constituents of landfill leachate by sludge-based activated carbon (SBAC). The adsorption effectiveness of SBAC for the exclusion of leachate characters including heavy metals, phenols, dyes, phosphates, and phosphorus were explored with regard to modifiers such as pH, temperature, properties of the adsorbent including functional groups, initial doses of absorbent and adsorbate, and duration of exposure to note the impact of each parameter on the efficiency of adsorption of the sludge adsorbent. Through the works of various researchers, it was noted that the properties of the adsorbent, pH and temperature impact the working of SBACs. The pH of the adsorbent by influencing the functional groups. Temperature was expected to have a paramount effect on the adsorption efficiency of the SBACs. The importance of the regeneration and recycling of the adsorbents as well as their leachability is highlighted. Sludge based activated carbon is recommended as a timely, resource-efficient, and sustainable approach for the remediation of wastewater.

Nitrogen in landfills: Sources, environmental impacts and novel treatment approaches

Nitrogen (N) accumulation in landfills is a pressing environmental concern due to its diverse sources and significant environmental impacts. However, there is relatively limited attention and research focus on N in landfills as it is overshadowed by other more prominent pollutants. This study comprehensively examines the sources of N in landfills, including food waste contributing to 390 million tons of N annually, industrial discharges, and sewage treatment plant effluents. The environmental impacts of N in landfills are primarily manifested in N2O emissions and leachate with high N concentrations. To address these challenges, this study presents various mitigation and management strategies, including N2O reduction measures and novel NH4+ removal techniques, such as electrochemical technologies, membrane separation processes, algae-based process, and other advanced oxidation processes. However, a more in-depth understanding of the complexities of N cycling in landfills is required, due to the lack of long-term monitoring data and the presence of intricate interactions and feedback mechanisms. To ultimately achieve optimized N management and minimized adverse environmental impacts in landfill settings, future prospects should emphasize advancements in monitoring and modeling technologies, enhanced understanding of microbial ecology, implementation of circular economy principles, application of innovative treatment technologies, and comprehensive landfill design and planning.

Blended Nephelium lappaceum and Durio zibethinus wastes for activated carbon production via microwave-ZnCl2 activation: optimization for methylene blue dye removal

Herein, this work targets to employ the blended fruit wastes including rambutan (Nephelium lappaceum) peel and durian (Durio zibethinus) seed as a promising precursor to produce activated carbon (RPDSAC). The generation of RPDSAC was accomplished through a rapid and practical procedure (microwave-ZnCl2 activation). To evaluate the adsorptive capabilities of RPDSAC, its efficacy in eliminating methylene blue (MB), a simulated cationic dye, was measured. The Box-Behnken design (BBD) was utilized to optimize the crucial adsorption parameters, namely A: RPDSAC dose (0.02-01 g/100 mL), B: pH (4-10), and C: time (2-6 min). The BBD design determined that the highest level of MB removal (79.4%) was achieved with the condition dosage of RPDSAC at 0.1 g/100 mL, contact time (6 min), and pH (10). The adsorption isotherm data is consistent with the Freundlich concept, and the pseudo-second-order versions adequately describe the kinetic data. The monolayer adsorption capacity (qmax) of RPDSAC reached 120.4 mg/g at 25 °C. Various adsorption mechanisms are involved in the adsorption of MB dye onto the surface of RPDSAC, including π-π stacking, H-bonding, pore filling, and electrostatic forces. This study exhibits the potential of the RPDSAC as an adsorbent for removal of toxic cationic dye (MB) from contaminated wastewater.

Mesoporous activated carbon derived from fruit by-product by pyrolysis induced chemical activation: optimization and mechanism for fuchsin basic dye removal

In this study, pineapple crown (PC) feedstock residues were utilized as a potential precursor toward producing activated carbon (PCAC) via pyrolysis induced with ZnCl2 activation. The PCAC has a surface area (457.8 m2/g) and a mesoporous structure with an average pore diameter of 3.35 nm, according to the Brunauer-Emmett-Teller estimate. The removal of cationic dye (Fuchsin basic; FB) was used for investigating the adsorption parameters of PCAC. The optimization of significant adsorption variables (A: PCAC dose (0.02-0.1 g/100 mL); B: pH (4-10); C: time (10-90); and D: initial FB concentration (10-50 mg/L) was conducted using the Box-Behnken design (BBD). The pseudo-second-order (PSO) model characterized the dye adsorption kinetic profile, whereas the Freundlich model reflected the equilibrium adsorption profile. The maximum adsorption capacity (qmax) of PCAC for FB dye was determined to be 171.5 mg/g. Numerous factors contribute to the FB dye adsorption mechanism onto the surface of PCAC, which include electrostatic attraction, H-bonding, pore diffusion, and π-π stacking. This study illustrates the utilization of PC biomass feedstock for the fabrication of PCAC and its successful application in wastewater remediation.

Treatment of landfill leachate by coagulation: A review

Landfill leachate is a seriously polluted and hazardous liquid, which contains a high concentration of refractory organics, ammonia nitrogen, heavy metals, inorganic salts, and various suspended solids. The favorable disposal of landfill leachate has always been a hot and challenging issue in wastewater treatment. As one of the best available technologies for landfill leachate disposal, coagulation has been studied extensively. However, there is an absence of a systematic review regarding coagulation in landfill leachate treatment. In this paper, a review focusing on the characteristics, mechanisms, and application of coagulation in landfill leachate treatment was provided. Different coagulants and factors influencing the coagulation effect were synthetically summarized. The performance of coagulation coupled with other processes and their complementary advantages were elucidated. Additionally, the economic analysis conducted in this study suggests the cost-effectiveness of the coagulation process. Based on previous studies, challenges and perspectives met by landfill leachate coagulation treatment were also put forward. Overall, this review will provide a reference for the coagulation treatment of landfill leachate and promote the development of efficient and eco-friendly leachate treatment technology.

Investigation of biochemical, enzymatic, and metagenomic profiles of garbage enzymes and its application in dumping site leachate treatment

The current article focuses on the preparation and characterization of garbage enzyme (GE) and explores its applications in treating leachate. GE is prepared from fruit and vegetable wastes and characterized via analysis of metabolites, carbohydrates, proteins, antioxidants, and enzymatic activities. This study extends our understanding of GE by reporting the presence of various metabolites. Moreover, a metagenomic analysis of GE is presented, shedding light on the microbial diversity. Firmicutes emerged as the dominant phylum, surpassing other phyla, including Proteobacteria and Actinobacteria. When exploring the potential for leachate treatment, the results indicate that vegetable GE shows 68% reduction in COD (chemical oxygen demand) and 39% reduction in ammoniacal nitrogen. Similarly, non-citrus GE also showed 64% reduction in COD and a 37% reduction in ammoniacal nitrogen, followed by citrus GE with a 33% reduction in COD and a 34% reduction in ammoniacal nitrogen compared to the control.

Helical magnetic micromotors decorated with nickel ferrocyanide for the active and rapid adsorption of radiocesium in water

Separating radioactive cesium from nuclear waste and contaminated environments is critical to mitigate radiological hazards. In response to this need, remote-controllable and Cs-selective micromotor adsorbents have been considered as a promising technology for rapid in-situ cleanup while minimizing secondary waste and radiation exposure to workers. In this study, we demonstrate the active and rapid removal of a radioactive contaminant from water by leveraging the magnetic manipulation capabilities of a helical and magnetic Ni micromotor coated with Cs-selective nickel ferrocyanide (NiFC). The use of polyvinyl alcohol fibers as a template enables the straightforward preparation of the helical wire structure, allowing for precise control over the diameter and pitch of the helix through simple twisting with Ni wires. By harnessing Ni2+ ions eluted from the Ni micromotor in an acid solution, we successfully fabricate NiFC-coated Ni (NiFC/Ni) micromotors that exhibit a selective removal efficiency greater than 98% for 137Cs, even in the presence of high concentrations of competing Na+ ions. Under the influence of an external magnetic field, the NiFC/Ni micromotor demonstrates rapid motion, achieving a pulling motion (100 body lengths per second) through a magnetic gradient and a tumbling motion (46 body lengths per second) induced by a rotating magnetic field. The tumbling motion of the NiFC/Ni micromotor substantially improves the Cs adsorption rate, resulting in a rate that surpasses that achieved under nonmoving conditions by a factor of 21. This improved adsorption rate highlights the considerable potential of magnetically manipulated micromotor self-propulsion for efficient water-pollution treatment.

Numerical simulation of different pollutant control measures around an old landfill contaminated site: A field scale study

The remediation of contaminated soils is a great challenge for global environmental sciences and engineering. The landfill was a kind of infrastructure to deal with waste from different sources while it would also cause the threat to groundwater. Cut-off walls and pumping wells were usually applied in the landfill to prevent the spread of pollutants to wider areas. However, the combination of using both of methods was rarely analyzed, especially using field data for calibrating and fitting groundwater flow and pollutant transport. 7 monitoring wells were arranged in the study area to survey the subsurface seepage. The pollution monitoring was carried out for a period of 50 days, covering 31 types of inorganic and organic pollutants. The concentration of 2,4,6-trichlorophenol (TCP) was 556.7 times greater than the standard concentration. A coupled numerical model of groundwater flow and pollutant transport was developed to assess the effectiveness of various control methods. Three options were tested, including the implementation of a single cut-off wall as well as a combination of a cut-off wall and a pumping well, for preventing the discharge of pollutants from landfills. The combination of a cut-off wall and a pumping well is the best strategy for removal of TCP. The combination approaches lead to a reduction of pollution plumes by a factor of 11 compared to the case without pollution control measures. The research findings may provide a basis and reference for the application of cutoff walls and pumping well in landfill sites or contaminated groundwater.

Sustainable remediation of toxic congo red dye pollution using bio based carbon nanocomposite: Modelling and performance evaluation

Remediation of synthetic dyes found in aqueous environment poses a serious challenge for treatment due to their resistance to chemical and biological degradation. This research study investigated the application of Chitosan-ZnO-Seaweed bio nanocomposite in the remediation of congo red. The novel bionanocomposite was characterised by FTIR, SEM, TEM, EDS and XRD studies. The FTIR spectra and SEM images indicated the adsorption of congo red onto the synthesized bionanocomposite. The batch wise experimental studies were done to explore the influence of process variables on removal of congo red from synthetic wastewater and to determine optimized conditions. Under optimized conditions of pH 3, temperature 40 °C, initial congo red concentration 50 mg/L, bionanocomposite quantity 0.03 g/L and interaction period 30 min, the bionanocomposite removed 95.64% of congo red. Thermodynamic studies were carried out and the parameters, ΔH° and ΔS° were found to be 38.386 kJ/mol and 0.1451 kJ/mol. K, respectively. The isotherm and kinetic study showed that monolayer Langmuir model was obeyed (R2 = 0.968) and the experimental value of congo red adsorption correlated well with pseudo second order model (R2 = 0.9938) respectively. The maximum adsorption capacity was found to be 303.03 mg/g. Protonated amino group of chitosan, hydroxyl group of seaweed accounts for congo red adsorption along with zinc oxide.

A new treatment step of bioelectrochemically treated leachate using natural clay adsorption towards sustainable leachate treatment

Standalone and combined leachate treatment mechanisms suffer from low treatment efficiencies due to leachate's complex, toxic, and recalcitrant nature. Bioelectrochemical system (BES) was used for the first time to investigate the treatment of leachate mixed wastewater (WW) (i.e., diluted leachate, DL) (DL ≈ L:WW = 1:4) to minimize these complexities. A natural clay (palygorskite) was used as adsorbent material for further treatment on the BES effluent (EBES) while using two different masses and sizes (i.e., 3 g and 6 g of raw crushed clay (RCC) and 75 μ of sieved clay (75 μSC)). According to bioelectrochemical performance, BES, when operated with low external resistance (Rext = 1 Ω) (BES 1), showed a high removal of COD and NH3-N with 28% and 36%, respectively. On the other hand, a high Rext (100 Ω, BES 100) resulted in low removal of NH3-N with 10% but revealed high COD removal by 78.26%. Moreover, the 6 g doses of 75 μSC and RCC showed the maximum COD removals of 62% and 38% and showed the maximum removal of NH3-N with an average range of 40% for both sizes. After efficient desorption, both clay sizes resulted in regeneration performance which was observed with high COD (75%) and NH3-N (34%) on EBES. Therefore, when BES and clay adsorption technique sequentially treated and achieved with combined removal of ~ 98% for COD and ~ 80% of NH3-N, it demonstrated an efficient treatment method for DL treatment.

Flocculation synergistic with nano zero-valent iron augmented attapulgite @ chitosan as Fenton-like catalyst for the treatment of landfill leachate

In this study, nano-zero-valent iron (NZVI) was added to attapulgite/chitosan and used as a catalyst in the heterogeneous Fenton process to degrade stabilized landfill leachate. Landfill leachate has serious environmental impacts due to the complexity and diversity of its pollutants. A magnetic catalyst (NZVI@PATP/CS) was prepared by a liquid-phase reduction method. The NZVI@PATP/CS were characterized by XRD, FTIR and SEM. The pH of leachate and the dosage of catalyst and H2O2 were changed to determine the best-operating conditions for the effective removal of chemical oxygen demand (COD) and total phosphorus(TP). To understand the adsorption degradation mechanism, the quenching experiments of free radicals were carried out. The results showed that the degradation rates of COD and TP were 66% and 92%, respectively, under the optimum pH value of 8, the dosage of H2O2 of 5 mL, and the dosage of the catalyst of 0.25 g for 60 min.

PAHs remediation from hazardous waste landfill leachate using fenton, photo - fenton and electro - fenton oxidation processes - performance evaluation under optimized conditions using RSM and ANN

Polycyclic aromatic hydrocharbons (PAHs) are a class of highly toxic pollutants that are highly detrimental to the ecosystem. Landfill leechate emanated from municipal solid waste are reported to constitute significant PAHs. In the present investigation, three Fenton proceses, namely conventional Fenton, photo-fenton and electro-fenton methods have been employed to treat landfill leehcate for removing PAHs from a waste dumpig yard. Response surface methodology (RSM) and artificial neural network (ANN) methodologies were adopted to optimize and validate the conditions for optimum oxidative removal of COD and PAHs. The statistical analysis results showed that all independent variables chosen in the study are reported to have significant influence of the removal effects with P-values <0.05. Sensitivity analysis by the developed ANN model showed that the pH had the highest significance of 1.89 in PAH removal when compared to the other parameters. However for COD removal, H2O2 had the highest relative importance of 1.15, followed by Fe2+ and pH. Under optimal treatment conditions, the photo-fenton and electro-fenton processes showed better removal of COD and PAH compared to the Fenton process. The photo-fenton and electro-fenton treatment processes removed 85.32% and 74.64% of COD and 93.25% and 81.65% of PAHs, respectively. Also the investigations revelaed the presence of 16 distinct PAH compunds and the removal percentage of each of these PAHs are also reported. The PAH treatment research studies are generally limited to the assay of removal of PAH and COD levels. In the present investigation, in addition to the treatment of landfill leachate, particle size distribution analysis and elemental characterization of the resultant iron sludge by FESEM and EDX are reported. It was revealed that elemental oxygen is present in highest percentage, followed by iron, sulphur, sodium, chlorine, carbon and potassium. However, iron percentage can be reduced by treating the Fenton-treated sample with NaOH.

Magnetic nanoparticle-assisted colonization of synthetic bacteria on plant roots for improved phytoremediation of heavy metals

Phytoremediation is a facile strategy to remove environmental heavy metals by using metal-accumulating plants from the rhizosphere environment. However, its efficiency is frequently compromised by the weak activity of rhizosphere microbiomes. This study developed a magnetic nanoparticle-assisted root colonization technique of synthetic functional bacteria to regulate rhizosphere microbiome composition for enhanced phytoremediation of heavy metals. The iron oxide magnetic nanoparticles with the size of 15-20 nm were synthesized and grafted by chitosan, a natural bacterium-binding polymer. The synthetic Escherichia coli SynEc2, which highly exposed an artificial heavy metal-capturing protein, was then introduced with the magnetic nanoparticles to bind the Eichhornia crassipes plants. Confocal microscopy, scanning electron microscopy, and microbiome analysis revealed that the grafted magnetic nanoparticles strongly promoted colonization of the synthetic bacteria on the plant roots, leading to remarkable change of rhizosphere microbiome composition, with the increase in the abundance of Enterobacteriaceae, Moraxellaceae, and Sphingomonadaceae. Histological staining and biochemical analysis further showed that the combination of SynEc2 and the magnetic nanoparticles protected the plants from heavy metal-induced tissue damage, and increased plant weights from 29 g to 40 g. Consequently, the plants with the assistance of synthetic bacteria and the magnetic nanoparticles in combination exhibited much higher heavy metal-removing capacity than the plants treated by the synthetic bacteria or the magnetic nanoparticles alone, leading to the decrease in the heavy metal levels from 3 mg/L to 0.128 mg/L for cadmium, and to 0.032 mg/L for lead. This study provided a novel strategy to remodel rhizosphere microbiome of metal-accumulating plants by integrating synthetic microbes and nanomaterials for improving the efficiency of phytoremediation.

Impact of municipal solid waste landfill leachate on biogas production rate

Landfills/open dump sites are the final disposal facilities for municipal solid waste (MSW). These sites undergo continuous process of biochemical reactions and anaerobic degradation, which make them prone to generation of landfill gas (LFG) and leachate. Worldwide, the quantitative and qualitative assessment for leachate treatment and management has been a growing concern. The present study investigated the physico-chemical characteristics and heavy metal parameters for fresh, 3-month, 6-month and 3-year old landfill leachate samples. The total dissolved solids (13280 mg/l), alkalinity (13000 mg/l), chemical oxygen demand (42000 mg/l) and total organic carbon (16500 mg/l) was found to be maximum in 3-year old leachate sample. While, the 3 and 6-month old leachate samples had maximum heavy metal concentration. The attempt was also made to identify the key parameters responsible to enhance biogas production yield from different ages of MSW. The substrate combinations of MSW and 3-year old leachate samples was prepared at varying proportion. The study was performed in three cycles and the volume of leachate diffused in each cycle was kept constant. The control samples with no leachate diffusion was also prepared to compare the percentage increase in biogas production rate. It was found that the cumulative methane (CH₄) production from fresh (358 ml/g) and 3-month old MSW (273 ml/g) was maximum, and the overall percentage increase was 43% and 32%. It was also conclusive that the excess leachate diffusion of >15 ml results in low calcination behaviour and CH₄ production rate. The response surface methodology was used to correlate and validate independent input variables (volatile solids, C/N ratio and leachate concentration) responsible for maximum CH₄ yield.

Use of copper sheet in a solar photo-Fenton-like process applied in the treatment of landfill leachate

It is known that copper can be used as catalyst in photo-Fenton-like process; however, there is a lack of information related with its use in the treatment of landfill leachate (LL) in solar photo-Fenton-like processes. Here, we studied the effect of the mass of a copper sheet, the pH of the solution, and the concentration of LL in the removal of the organic matter present in this water. Before the reaction with landfill leachate, the copper sheet used in the reaction was constituted by Cu⁺ and Cu₂O, respectively. The results showed that in a volume of 0.5 L of a pretreated LL, the higher removal of organic matter resulted using a mass of 2.7 g of the copper sheet, a pH of solution of 5, and a concentration of LL of a 10%, obtaining a final value of C/C₀ of chemical oxygen demand (COD) of 0.34, 0.54, 0.66, and 0.84 for concentrations of 25%, 50%, 75%, and 100%, respectively, and 0.0041, 0.0042, 0.0043, and 0.016 for concentration of 25%, 50%, 75%, and 100%, respectively, of C/C₀ of humic acids. The photolysis on LL at its natural pH using solar UV removes very little humic acid and COD, going from 9.4 to 8.5 and 7.7 Abs₂₅₄ for photolysis and UV + H₂O₂, obtaining 8.6 and 17.6% of removal, respectively, and 2.01 and 13.04% removal of COD, respectively. Copper sheet applied under Fenton-like conditions results in 65.9% removal and an increase of 0.2% for humic acid and COD, respectively. Removal using only H₂O₂ for Abs₂₅₄ and COD was 11.95 and 4.3%, respectively. Raw LL produced a 29.1% inhibition of the biological activated sludge rate after the adjustment to pH 7 and the final process of inhibition was 0.23%.

Treatment of raw sanitary landfill leachate using a hybrid pilot-scale system comprising adsorption, electrocoagulation and biological process

The effectiveness of a three-stage pilot approach using adsorption (AD), electrocoagulation (EC) and biological (BIO) processes for the treatment of raw sanitary landfill leachate (SLL) was investigated. SLL is loaded with hazardous substances such as organic load and heavy metals with high ammonium nitrogen (NH₄⁺-N) concentrations and is also produced in large quantities, causing serious risks to both living organisms and the environment. In this study, column adsorption experiments were initially performed to examine the removal of toxic NH₄⁺-N using different initial NH₄⁺-N concentrations and recirculation flow rates. The adsorption process was then examined as a pre-treatment step in two sequential treatment scenarios, i.e., AD-EC-BIO and AD-BIO-EC, to determine which achieved the highest removal of pollutants and leachate toxic potential, thus ensuring the biosafety of these processes during the release of the respective effluents into surface waters. The overall removal efficiencies of NH₄⁺-N, color, dissolved chemical oxygen demand (d-COD), manganese (Mn), nickel (Ni), zinc (Zn) and iron (Fe) achieved after the application of the AD-EC-BIO system were 95.5 ± 0.1%, 98.8 ± 0.1%, 85.7 ± 0.8%, 100 ± 0.1%, 71.4 ± 1.7%, 63.8 ± 1.9% and 94.2 ± 0.2%, respectively, while the values for the AD-BIO-EC system were 98.5 ± 0.2%, 98.7 ± 0.1%, 85.7 ± 0.4%, 98.9 ± 1.2%, 67.7 ± 1.7%, 76.1 ± 1.6% and 94.8 ± 0.1%, respectively. In accordance with the latter, the assessment of leachate toxic potential using a Thamnocephalus platyurus bioassay revealed that the AD-EC-BIO system could be considered a promising treatment strategy for the purification of raw SLL.

Leachate decontamination through biological processes coupled to advanced oxidation: A review

The landfill leachate is considered a toxic effluent composed of recalcitrant contaminants that requires innovative alternatives for its decontamination. Coupling between advanced oxidation processes (AOPs) and aerobic biological treatments are highlighted in this research. Therefore, a bibliographic review of the research made from 2010 to 2021 was developed. These combined alternatives were applied in leachates, and it is oriented toward the analysis of knowledge gaps, trends, and future proposals of the treatment combined that contribute to researchers who wish to work on the subject. These kinds of treatments were chosen due to a bibliometric analysis made. Also, the information was searched in several scientific database. This work was found to be unpublished, as no reviews were found so far that agglomerate studies of coupling between photocatalytic and aerobic biological processes to treat leachates. Besides, AOPs are ideal for treating wastewater of complex composition, however, when it is used as the only treatment, they are usually unprofitable, which justifies their coupling with biological treatments. Subsequently, it was determined that the knowledge main gap is the lack of documentation of treatment costs, which makes it difficult to implement on a real scale. In addition to this, the couplings trends are toward doping with metallic and nonmetallic ions of the catalyst used in the photocatalytic process to improve the efficiency of these. Finally, future research should work on finding alternatives that allow the optimization of the resources used in the combined systems and on promoting the recovery of existing products in the leachate.Implications: Leachates generate several environmental impacts due to their toxic composition. Even when coupling between heterogeneous photocatalysis and biologic treatment can solve them, issues like cost analysis and the scaling-up factor have not been developed, and futures researchers should work on that. Besides, the trend founded in almost all investigations was the catalyst doping with metals and nonmetals ions, particularly when they use TiO2 because it gives the possibility of improving efficiencies just with a structural variation. Finally, these treatment combinations require more analyses and comparison of their remotion over emerging pollutants and their performance with new designs.

Comparison of microscopic adsorption characteristics of Zn(II), Pb(II), and Cu(II) on kaolinite

In this research, kaolinite was used to investigate the comparative adsorption of copper, lead, and zinc ions through batch control experiments and first principles calculations. Different adsorption conditions were considered as the effect of solution acidity, initial concentration of ions, and contact shaking time. The adsorption system isotherms and kinetic studies were better agreed with the Langmuir and pseudo-second-order kinetic models. They reached adsorption equilibrium within two hours and maximum adsorption capacities of Zn(II), Pb(II), and Cu(II) on kaolinite were 15.515, 61.523, and 44.659 mg/g, respectively. In addition, the microscopic adsorption changes of Zn(II), Pb(II), and Cu(II) on kaolinite were characterized using X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy with energy dispersive X-ray spectroscopy. The results showed that Zn(II), Pb(II), and Cu(II) were most likely to be adsorbed on the kaolinite surface. Furthermore, the adsorption mechanism of [Zn(OH)]+, [Pb(OH)]+, and [Cu(OH)]+ on the kaolinite (001) surface was systematically studied through first-principles density functional calculations. The adsorption characteristics of different ions were evaluated by calculating the adsorption energy of the equilibrium adsorption configuration, state density, and electron density. The adsorption energy of [Zn(OH)]+, [Pb(OH)]+, and [Cu(OH)]+ were − 0.49,  − 1.17, and − 1.64 eV, respectively. The simulation results indicated that new hybrid orbitals were formed between the metal ions and O atoms on the kaolinite surface, with electron transfer occurring the adsorption processes. The charge transfer direction for [Pb(OH)]+ was opposite those for [Zn(OH)]+ and [Cu(OH)]+. [Zn(OH)]+ was more likely to form polydentate complexes with hydroxyl groups on the kaolinite surface than [Cu(OH)]+ and [Pb(OH)]+. This work further elucidated the interaction mechanism between the adsorption systems and provided fundamental theoretical support for the structural modification and optimization of kaolinite, such as increasing the layer spacing of kaolinite and introducing other active groups on its surface to improve the adsorption capacity of heavy metal ions in water treatment and soil remediation.

Reclaimable MoS2 Sponge Absorbent for Drinking Water Purification Driven by Solar Energy

With the fast development of modern industries, scarcity of freshwater resources caused by heavy metal pollution (i.e., Hg²⁺) has become a severe issue for human beings. Herein, a 3D-MoS₂ sponge as an excellent absorbent is fabricated for mercury removal due to its multidimensional adsorption pathways, which decreases the biomagnification effect of methylmercury in water bodies. Furthermore, a secondary water purification strategy is employed to harvest drinkable water with the exhausted adsorbents, thus alleviating the crisis of drinking water shortage. Compared to the conventional landfill treatment, the exhausted MoS₂ sponge absorbents are further functionalized with a poly(ethylene glycol) (PEG) layer to prevent the heavy metals from leaking and enhance the hydrophilicity for photothermal conversion. The fabricated evaporator displays excellent evaporation rates of ∼1.45 kg m^-2 h^-1 under sunlight irradiation and produces freshwater with Hg²⁺ under the WHO drinking water standard at 0.001 mg L^-1. These results not only assist in avoiding the biodeposition effect of mercury in water but also provide an environment-friendly strategy to recycle hazardous adsorbents for water purification.

Effect of Fulvic Acid in Landfill Leachate Membrane Concentrate on Evaporation Process

Landfill leachate membrane concentrate (LLMC) poses risks to the environment and is commonly treated by evaporation. As the main component of the dissolved organic matter in LLMC, fulvic acid (FA) was selected as a representative to investigate its effect on evaporation and the removal efficiency by pretreatment in this study. According to the water quality indexes and three-dimensional fluorescence spectra of LLMC samples collected from five landfills in China, the concentration of total organic carbon in LLMC was 700–2500 mg·L−1, in which FA accounted for 50–85%. The boiling point and viscosity of the configured FA-NaCl-Na2SO4 solution both increased significantly when FA was concentrated 20 times (approximately 30,000 mg·L−1). Due to the presence of FA, the violent frothing phenomenon appeared at above 70 °C in evaporation, and the solubility of CaSO4·2H2O in FA-NaCl-Na2SO4 solution was significantly lower than that without FA. All these results indicated that the high FA concentration in LLMC could lead to decreased heat transfer coefficient and evaporation capacity during evaporation. Therefore, the softening pretreatment including the addition of Ca(OH)2, Na2CO3, and coagulants was employed to reduce the hardness and FA concentration. After the softening experiments, the removal efficiency of FA was >95% for the configured LLMC sample, while for the actual LLMC sample collected from landfills, the removal efficiency of FA and chemical oxygen demand could reach >80% and about 30%, respectively. The remaining concentration of FA in LLMC was about 200 mg·L−1, and the recovery efficiency of clean water could be 90% in the evaporation process. This research has important guiding significance for the evaporation treatment of LLMC.

Effect of Bimetallic-Activated Carbon Impregnation on Adsorption-Desorption Performance for Hydrogen Sulfide (H2S) Capture

This study reports on the impregnation of bi-metallic adsorbents based on commercial coconut activated carbon (CAC), surface-modified with metal acetate (ZnAc₂), metal oxide (ZnO and TiO₂), and the basic compound potassium hydroxide (KOH). The morphology of the adsorbents was then characterized with SEM-EDX, the microporosity was determined using Brunauer-Emmett-Teller (BET) analysis, the thermal stability was investigated via thermogravity analysis (TGA), and functional group analysis was undertaken with Fourier-transform infrared (FTIR) spectroscopy. These modified adsorbents were subjected to a real adsorption test for H₂S capture using a 1 L adsorber with 5000 ppm H₂S balanced for N₂, with temperature and pressure maintained at an ambient condition. Adsorption-desorption was carried out in three cycles with the blower temperature varied from 50 °C to 150 °C as the desorption condition. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, effecting the morphology and properties. Based on this study, it was found that ZnAc₂/TiO₂/CAC_DCM showed a significant increase in adsorption capacity with the different temperatures applied for the desorption in the second cycle: 1.67 mg H₂S/g at 50 °C, 1.84 mg H₂S/g at 100 °C, and 1.96 mg H₂S/g at 150 °C. ZnAc₂/ZnO/CAC_DCM seemed to produce the lowest percentage of degradation in the three cycles for all the temperatures used in the adsorption-desorption process. Therefore, ZnAc₂/ZnO/CAC_DCM has the potential to be used and commercialized for biogas purification for H₂S removal.

Advances in biological methods for the sequestration of heavy metals from water bodies: A review

Pollution is a major concern of the modern era as it affects all the principal aspects of the environment, especially the hydrosphere. Pollution with heavy metals has unequivocally threatened aquatic bodies and organisms as these metals are persistent, non-biodegradable, and toxic. Heavy metals tend to accumulate in the environment and eventually in humans, which makes their efficient removal a topic of paramount importance. Treatment of metal-contaminated water can be done both via chemical and biological methods. Where remediation through conventional methods is expensive and generates a large amount of sludge, biological methods are favoured over older and prevalent chemical purification processes because they are cheaper and environment friendly. The present review attempts to summarise effective methods for the remediation of water contaminated with heavy metals. We concluded that in biological techniques, bio-sorption is among the most employed and successful mechanisms because of its high efficacy and eco-friendly nature.

Coagulation removal of dissolved organic matter (DOM) in nanofiltration concentrate of biologically treated landfill leachate by ZrCl4: Performance, mechanism and coagulant recycling

Coagulation treatment is often applied for removing the residual refractory dissolved organic matter (DOM) in biologically treated landfill leachate nanofiltration concentrate (LLNC) before discharge or further desalination treatment. However, the DOM removal efficiency by traditional coagulant needs to be improved, and two problems including the coagulant loss and difficulty in disposal of coagulation sludge need to be resolved. Based on this practical demand, a new coagulant ZrCl₄ was adopted for LLNC treatment for the first time. The results showed that, ZrCl₄ was better than the traditional coagulants (FeCl₃ and AlCl₃) for DOM removal. Under the optimal condition of pH 6.0 and ZrCl₄ dosage of 5.0 mM, the DOC content, UV₂₅₄ and chromaticity of the LLNC reduced by 73.32%, 83.17% and 93.59%, respectively. All of the coagulants tested in this study could efficiently remove the hydrophobic and high molecular organics. There was an obvious difference between them for removal of hydrophobic, and small or medium molecular organics, and ZrCl₄ was more effective. This might be due to the stronger negative charge neutralization capacity and larger floc size of ZrCl₄, which was beneficial for DOM combination and adsorption. The loss of zirconium was only 2.11%, which was much lower than that of iron and aluminum. Furthermore, being recycled for 3 times after coagulant regeneration, the recovered zirconium coagulant showed no obvious difference with the original ZrCl₄ for DOM removal, indicating the disposal problem of the produced coagulation sludge can be resolved. This study could provide a promising method for LLNC treatment.

Micro-algae assisted green bioremediation of water pollutants rich leachate and source products recovery

Water management and treatment are high concern fields with several challenges due to increasing pollutants produced by human activity. It is imperative to find integral solutions and strategic measures with robust remediation. Landfill leachate production is a high concern emerging problem. Especially in low middle-income countries due to no proper local waste disposition regulation and non-engineered implemented methods to dispose of urban waste. These landfills can accumulate electronic waste and release heavy metals during the degradation process. Similar phenomena include expired pharmaceuticals like antibiotics. All these pollutants accumulated in leachate made it hard to dispose of or treat. Leachate produced in non-engineered landfills can permeate soils and reach groundwater, dragging different contaminants, including antibiotics and heavy metals, which eventually can affect the environment, changing soil properties and affecting wildlife. The presence of antibiotics in the environment is a problem with particular interest to solve, mainly to avoid the development of antibiotic-resistant microorganisms, which represent a future risk for human health with possible epidemic implications. It has been reported that the use of contaminated water with heavy metals to produce and grow vegetables is a risk for consumers, heavy metals effects in humans can include carcinogenic induction. This work explores the opportunities to use leachate as a source of nutrients to grow microalgae. Microalgae stand out as an alternative to bioremediate leachate, at the same time, microalgae produce high-value compounds that can be used in bioplastic, biofuels, and other industrial applications.

Performance investigation of electrochemical assisted HClO/Fe2+ process for the treatment of landfill leachate

The feasibility of removal of chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) from landfill leachate by an electrochemical assisted HClO/Fe2+ process is demonstrated for the first time. The performance of active chlorine generation at the anode was evaluated in Na2SO4/NaCl media, and a higher amount of active chlorine was produced at greater chloride concentration and higher current density. The probe experiments confirmed the coexistence of hydroxyl radical (•OH) and Fe(IV)-oxo complex (FeIVO2+) in the HClO/Fe2+ system. The influence of initial pH, Fe2+ concentration, and applied current density on COD and NH4+-N abatement was elaborately investigated. The optimum pH was found to be 3.0, and the proper increase in Fe2+ dosage and current density resulted in higher COD removal due to the accelerated accumulation of •OH and FeIVO2+ in the bulk liquid phase, whereas, the NH4+-N oxidation was significantly affected by the applied current density because of the effective active chlorine generation at higher current but was nearly independent of Fe2+ concentration. The reaction mechanism of electrochemical assisted HClO/Fe2+ treatment of landfill leachate was finally proposed. The powerful •OH and FeIVO2+, in concomitance with active chlorine and M(•OH), were responsible for COD abatement, and active chlorine played a key role in NH4+-N oxidation. The proposed electrochemical assisted HClO/Fe2+ process is a promising alternative for the treatment of refractory landfill leachate.

Electrochemical Oxidation of Landfill Leachate after Biological Treatment by Electro-Fenton System with Corroding Electrode of Iron

Electrochemical oxidation of landfill leachate after biological treatment by a novel electrochemical system, which was constructed by introducing a corroding electrode of iron (Fe_c) between a boron-doped diamond (BDD) anode and carbon felt (CF) cathode (named as BDD–Fe_c–CF), was investigated in the present study. Response surface methodology (RSM) with Box–Behnken (BBD) statistical experiment design was applied to optimize the experimental conditions. Effects of variables including current density, electrolytic time and pH on chemical oxygen demand (COD) and ammonia nitrogen (NH₃-N) removal efficiency were analyzed. Results showed that electrolytic time was more important than current density and pH for both COD and NH₃-N degradation. Based on analysis of variance (ANOVA) under the optimum conditions (current density of 25 mA·cm⁻², electrolytic time of 9 h and pH of 11), the removal efficiencies for COD and NH₃-N were 81.3% and 99.8%, respectively. In the BDD–Fe_c–CF system, organic pollutants were oxidized by electrochemical and Fenton oxidation under acidic conditions. Under alkaline conditions, coagulation by Fe(OH)₃ and oxidation by Fe(VI) have great contribution on organic compounds degradation. What is more, species of organic compounds before and after electrochemical treatment were analyzed by GC–MS, with 56 kinds components detected before treatment and only 16 kinds left after treatment. These results demonstrated that electrochemical oxidation by the BDD–Fe_c–CF system has great potential for the advanced treatment of landfill leachate.

Leachate treatment potential of nanomaterial based assemblies: a systematic review on recent development

Rapid development of the population has brought about a serious problem of waste generation and management. Open dumping and land filling are two of the preferred options for waste management and treatment. As a consequence of this, the accumulation of leachates has become one of the concerns for environmental sustainability. In this regard, various treatment methodologies have been developed in recent decades. Among them, the nanomaterial-based approaches are the emerging ones in the current scenario due to their various unique properties. Furthermore, nanomaterial-based assemblies (i.e., nanomaterials combined with microbes, chemical catalysts, enzymes, and so on) have been introduced as a novel modification for leachate treatment. This work, therefore, has been dedicated to comprehensively reviewing all nanomaterial based leachate treatment techniques. In this regard, the first part of this review will discuss the nano catalyst, nano adsorbent along with their synthesis and mechanistic view of pollutant removal potential. In the second part, the nanomaterial-based microbial conjugates applied in the leachate treatments have been discussed. Apart from this, various other nanomaterial-based methods have been discussed in the third part of the review. Hence this review is providing an insight of all the recent developments pertaining to the nano material based leachate treatment techniques.

A hybrid process for leachate wastewater treatment: Evaporation and reverse osmosis/sequencing batch reactor

In this study, a hybrid process for leachate wastewater treatment including evaporation and reverse osmosis (RO) membrane or biological treatment systems was suggested. Experiments were performed on a real landfill leachate wastewater. The leachate was subjected to evaporation; as a result, a distillate was obtained containing less organic matter and less substantial amounts of other pollutants, as ammonium salts and total phenols were removed. Tests were carried out at different evaporation temperatures and times. The initial leachate pH was adjusted and optimized. For optimum conditions, each of chemical oxygen demand (COD), total phenol, and ammonium salt concentrations were reduced to 99.99%, 95.00%, and 83.00%, respectively. The distillate of the first stage of the proposed process was then exposed to RO membrane system, as a first study, under different transmembrane pressure of 20, 30, and 40 bar and at different pH values of 7, 8, and 9. As a second suggested treatment system, the distillate was subjected to a biological treatment process for 30 days as a retention time, pH = 6, and room temperature 25°C ± 1°C. At the end of the research study, a comparison was conducted between results obtained with RO membrane separation and biological treatment system as two distinct treatment systems proposed for leachate landfill wastewater treatment. Although both systems were effective for landfill leachate wastewater treatment, however, with the RO membrane separation system, COD removal efficiency reached 99.99%. In the other hand, with biological treatment process, COD elimination was as much as 90.00%. Certainly, evaporation and RO are not novel ways of landfill leachate treatment; however, few studies have attempted to use similar combined system for landfill leachate wastewater treatment and attained effective results of treated water. PRACTITIONER POINTS: A hybrid process of evaporation and RO membrane or biological treatment systems was suggested for leachate wastewater treatment. For optimum conditions, COD, total phenols, and ammonium salt reductions were achieved to 99.99%, 95%, and 83%, respectively, after the first evaporation stage. The distillate of the first stage of the proposed process was then exposed to RO membrane system and biological treatment system. Different transmembrane pressure and different pH values were optimized for RO.

Leachate treatment using sequential microwave and algal photo-bioreactor: Effect of pretreatment on reactor performance and biomass productivity

The present study aims to design a lab-scale hybrid reactor, primarily focused on the removal of organics, nutrients, heavy metal and other toxic compounds, thereby, minimizing risk associated with the disposal of landfill leachate. The potential of a designed hybrid treatment system (i.e., sequential microwave (MW) with algal bioreactor) with and without pretreatment, i.e., coagulation-flocculation (CF), was evaluated based on several parameters. The CF pretreatment under optimized conditions has resulted in 90% turbidity and 76% COD removals from leachate; furthermore, the MW treatment achieved 91% ammonia removal from raw leachate. As a result, substantial algal growth was observed in the preliminary algal batch experiment conducted with MW and MW-CF treated samples. Subsequently, leachate treatment was carried out using sequencing batch reactor (SBR) systems, i.e., MW-algal SBR and CF-MW-algal SBR. Algal biomass growth and increment in DO level were observed in algal-SBR experiments. Under the optimized reactor conditions, TN and TP removal rates in the algal-SBR were found to be 1.67-20 mg/L/d and 0.6-9.6 mg/L/d, respectively. The majority of heavy metals present in the leachate were removed due to algal-uptake (mainly Zn2+) and bio-sorption (total-Fe, Cu2+ and Pb2+). Meanwhile, some amount of energy can be recovered from algal biomass as inferred from the cost benefit analysis. Overall, the hybrid treatment combining MW and algal-SBR has shown immense potential for sustainable leachate treatment.

Alkylation modified pistachio shell-based biochar to promote the adsorption of VOCs in high humidity environment

The objective of this work was to evaluate the adsorption capacity of alkylated modified porous biochar prepared by esterification and etherification (PSAC-2) for low concentrate volatile organic compounds (VOCs, toluene and ethyl acetate) in high humidity environment by experiments and theoretical calculations. Results showed that PSAC-2 has a large specific surface area and weak surface polarity, at 80% relative humidity, its capacities for toluene and ethyl acetate adsorption could be maintained at 92% and 87% of the initial capacities (169.9 mg/g and 96.77 mg/g). The adsorption behaviors of toluene, ethyl acetate, and water vapor were studied by adsorption isotherms, and isosteric heat was obtained. The desorption activation energy was obtained by temperature programmed desorption experiment. The outcomes manifested that the PSAC-2 can achieve strong adsorption performance for weakly polar molecules. Through density functional theory (DFT) simulations, owing to the interaction of hydrogen bonds, oxygen-containing groups became a significant factor influencing the adsorption of VOCs in humid environments. These results could provide an important reference for VOCs control in a high humidity environment.

Magnetic Adsorbents for Wastewater Treatment: Advancements in Their Synthesis Methods

The remediation of water streams, polluted by various substances, is important for realizing a sustainable future. Magnetic adsorbents are promising materials for wastewater treatment. Although numerous techniques have been developed for the preparation of magnetic adsorbents, with effective adsorption performance, reviews that focus on the synthesis methods of magnetic adsorbents for wastewater treatment and their material structures have not been reported. In this review, advancements in the synthesis methods of magnetic adsorbents for the removal of substances from water streams has been comprehensively summarized and discussed. Generally, the synthesis methods are categorized into five groups, as follows: direct use of magnetic particles as adsorbents, attachment of pre-prepared adsorbents and pre-prepared magnetic particles, synthesis of magnetic particles on pre-prepared adsorbents, synthesis of adsorbents on preprepared magnetic particles, and co-synthesis of adsorbents and magnetic particles. The main improvements in the advanced methods involved making the conventional synthesis a less energy intensive, more efficient, and simpler process, while maintaining or increasing the adsorption performance. The key challenges, such as the enhancement of the adsorption performance of materials and the design of sophisticated material structures, are discussed as well.

Magnetic Poly(glycidyl methacrylate) Microspheres with Grafted Polypyrrole Chains for the High-Capacity Adsorption of Congo Red Dye from Aqueous Solutions

In this study, novel magnetic poly(glycidyl methacrylate) (PGMA) microspheres with grafted polypyrrole chains (magnetic PGMA-g-PPy) were developed for the high-capacity adsorption of Congo red (CR) from aqueous solutions. The magnetic PGMA-g-PPy was synthesized by the typical dispersion polymerization method and the ring-opening reaction of epoxy groups, producing abundant hydroxyls for the grafting polymerization of pyrrole in the presence of FeCl3 as an oxidizing agent on the surface of the microspheres. The characterization results showed that magnetic PGMA-g-PPy was successfully fabricated. The adsorption equilibrium data of the adsorbents could be well fitted by the Langmuir isotherm model, showing a high maximum adsorption capacity of 502.5 mg/g for CR. The adsorption followed pseudo-second-order kinetics with a fast speed. The adsorbents had no leaching of Fe in the solution at pH 1.0–11.0 for 24 h. The adsorption process was strongly pH-dependent and weakly ionic-strength-dependent. Furthermore, the magnetic microspheres could be easily regenerated, rapidly separated from the solution, and reused for wastewater treatment. The results suggest that magnetic PGMA-g-PPy microspheres are a promising efficient adsorbent for the removal of CR from wastewater.

Occurrence of organic micropollutants in municipal landfill leachate and its effective treatment by advanced oxidation processes

Landfilling is the most prominently adopted disposal technique for managing municipal solid waste across the globe. However, the main drawback associated with this method is the generation of leachate from the landfill site. Leachate, a highly concentrated liquid consisting of both organic and inorganic components arises environmental issues as it contaminates the nearby aquifers. Landfill leachate treatment by conventional methods is not preferred as the treatment methods are not much effective to remove these pollutants. Advanced oxidation processes (AOPs) based on both hydroxyl and sulfate radicals could be a promising method to remove the micropollutants completely or convert them to non-toxic compounds. The current review focuses on the occurrence of micropollutants in landfill leachate, their detection methods and removal from landfill leachate using AOPs. Pharmaceuticals and personal care products occur in the range of 10^-1 to more than 100 μg L^-1 whereas phthalates were found below the detectable limit to 384 μg L^-1, pesticides in the order of 10^-1 μg L^-1 and polyaromatic hydrocarbons occur in concentration from 10^-2 to 114.7 μg L^-1. Solid-phase extraction is the most preferred method for extracting micropollutants from leachate and liquid chromatography (LC) - mass spectrophotometer (MS) for detecting the micropollutants. Limited studies have been focused on AOPs as a potential method for the degradation of micropollutants in landfill leachate. The potential of Fenton based techniques, electrochemical AOPs and ozonation are investigated for the removal of micropollutants from leachate whereas the applicability of photocatalysis for the removal of a wide variety of micropollutants from leachate needs in-depth studies.

The evolving trends of landfill leachate treatment research over the past 45 years

Landfilling is one of the most prevalent waste management strategies on a global scale. However, one major drawback of landfills is the production of highly contaminated leachate which can harm ecosystems and pollute water resources which municipalities depend on. Various treatment options have been explored for treating leachate throughout the years. This paper aims to investigate landfill leachate treatment studies through bibliometric and visual analysis of articles collected from the Scopus database from 1975 to 2019. The results show that more than one thousand papers have been published in 159 journals. Nearly 3000 authors have published on the topic, most commonly from China, the USA, Malaysia, and Brazil. The keywords co-occurrence network led to the formation of 5 topical clusters, after which they were closely examined and titled "oxidation processes," "nitrogen removal processes," "constructed wetlands/coagulation," "adsorption," and "membrane-based processes" based on their contents. Finally, the overlay network was used to discern the hottest research trends. The results showed that advanced coagulation-based processes (such as peroxicoagulation) and studies focusing on improving membrane-based processes through reduction of membrane fouling are focal points which will be trending into the future.

Microalgae Chlorella vulgaris and Scenedesmus dimorphus co-cultivation with landfill leachate for pollutant removal and lipid production

In this study, landfill leachate was pre-treated with NaClO, and then diluted to 5%, 10% and 15% for microalgae growth of Chlorella vulgaris and Scenedesmus dimorphus in the mono- and co-culture modes to investigate the nutrient removal and growth characteristics of microalgae. The results revealed that landfill leachate with the 10% dilution rate was conducive for microalgae growth and exhibited robust biomass growth and the highest nutrient removal efficiency. The co-culture biomass in 10% landfill leachate achieved 0.266 g/L within 10 days and demonstrated the improved nutrient utilisation efficiency of microalgae. In addition, the chemical oxygen demand, ammonia nitrogen, total nitrate and total phosphorus removal efficiencies accordingly reached 81.0%, 80.1%, 72.1% and 86.0% in 10% landfill leachate. Meanwhile, both the enzyme activity and fluorescence parameters proved that the cell activity of co-culture was higher than that of mono-culture.

Adsorptive Removal of Copper (II) Ions from Aqueous Solution Using a Magnetite Nano-Adsorbent from Mill Scale Waste: Synthesis, Characterization, Adsorption and Kinetic Modelling Studies

In this study, magnetite nano-adsorbent (MNA) was extracted from mill scale waste products, synthesized and applied to eliminate Cu²⁺ from an aqueous solution. Mill scale waste product was ground using conventional milling and impacted using high-energy ball milling (HEBM) for varying 3, 5, and 7 milling hours. In this regard, the prepared MNA was investigated using X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), field emission scanning electron microscopy-energy-dispersive X-ray spectroscopy (FESEM-EDS), UV-Vis spectroscopy, Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET) and zeta potential. The resultant MNA-7 h milling time displayed a crystalline structure with irregular shapes of 11.23 nm, specific surface area of 5.98 m²g^-1, saturation magnetization, Ms of 8.35 emug^-1, and isoelectric point charge at pH 5.4. The optimum adsorption capacity, q_e of 4.42 mg.g^-1 for the removal of Cu²⁺ ions was attained at 120 min of contact time. The experimental data were best fitted to the Temkin isotherm model. A comparison between experimental kinetic studies and the theoretical aspects showed that the pseudo-second-order matched the experimental trends with a correlation coefficient of (R² > 0.99). Besides, regeneration efficiency of 70.87% was achieved after three cycles of reusability studies. The MNA offers a practical, efficient, low-cost approach to reutilize mill scale waste products and provide ultra-fast separation to remove Cu²⁺ from water.

Preparation of High-Efficiency Flame-Retardant and Superhydrophobic Cotton Fabric by a Multi-Step Dipping

Cotton fabric, as an important material, is suffering from some defects such as flammability, easy pollution and so on; therefore, it is important to make a flame-retardant and superhydrophobic modification on cotton fabric. In this study, we demonstrated a preparation of high-efficiency flame-retardant and superhydrophobic cotton fabric with double coated construction by a simple multi-step dipping. First, the fabric was immersed in branched poly(ethylenimine) (BPEI) and ammonium polyphosphate (APP) water dispersions successively, and then immersed in polydimethylsiloxane (PDMS)/cellulose nanocrystals (CNC)-SiO2 toluene dispersion to form a BPEI/APP/PDMS/CNC-SiO2 (BAPC) composite coating on the surface of the cotton fabric. Here, the hydrophobic modified CNC-SiO2 rods were used to construct the superhydrophobic layer and the BPEI/APP mixture was used as the flame-retardant layer, as well as SiO2 particles which could further improve the flame-retardant effect. PDMS was mainly used as an adhesive between the BPEI/APP layer and the CNC-SiO2 layer. The resulting cotton fabric shows outstanding flame-retardant properties, in that the value of oxygen index meter (LOI) reaches 69.8, as well as excellent superhydrophobicity, in that the water contact angle (WCA) is up to 156.6°. Meanwhile, there is a good abrasion resistance, the superhydrophobicity is not lost until the 16th abrasion cycles and the flame retardant retains well, even after 100 abrasion cycles in an automatic vertical flammability cabinet under a pressure of 8.8 kPa.

Feasibility of H2O2 cleaning for forward osmosis membrane treating landfill leachate

This study reports landfill leachate treatment by the forward osmosis (FO) process using hydrogen peroxide (H₂O₂) for membrane cleaning. Although chemical cleaning is an effective method for fouling control, it could compromise membrane integrity. Thus, understanding the impact of chemical cleaning on the forward osmosis membrane is essential to improving the membrane performance and lifespan. Preliminary results revealed a flux recovery of 98% in the AL-FS mode (active layer facing feed solution) and 90% in the AL-DS (draw solution faces active layer) using 30% H₂O₂ solution diluted to 3% by pure water. The experimental work investigated the effects of chemical cleaning on the polyamide active and polysulfone support layers since the FO membrane could operate in both orientations. Results revealed that polysulfone support layer was more sensitive to H₂O₂ damage than the polyamide active at a neutral pH. The extended exposure of thin-film composite (TFC) FO membrane to H₂O₂ was investigated, and the active layer tolerated H₂O₂ for 72 h, and the support layer for only 40 h. Extended operation of the TFC FO membrane in the AL-FS based on a combination of physical (hydraulic flushing with DI water) and H₂O₂ was reported, and chemical cleaning with H₂O₂ could still recover 92% of the flux.