Microbial Base Editing: A Powerful Emerging Technology for Microbial Genome Engineering

Metal-organic frameworks-molecularly imprinted polymers (MOF-MIP): Synthesis, properties, and applications in detection and control of microorganisms

Microbial contamination poses a significant threat to human health, food safety, and the ecological environment. Its rapid spread and potential pathogenicity create an urgent global challenge for efficient detection and control. However, existing methods have several shortcomings such as traditional techniques like culture methods and polymerase chain reaction (PCR) are time-consuming, while nanomaterials and aptamers often lack selectivity, stability, and affordability. Additionally, conventional disinfectants can be inefficient, lead to drug resistance, and harm the environment. To address these challenges, developing new materials and technologies that are efficient, sensitive, and stable is crucial for microbial detection and control. In this context, metal-organic frameworks (MOF) and molecularly imprinted polymers (MIP) have emerged as promising functional materials due to their unique structural advantages. The high porosity of MOF provides ample imprinting sites for MIP, while MIP enhance selective adsorption and inactivation of target microorganisms by MOF. This synergistic combination results in a composite material that offers a novel solution for microbial detection, significantly improving sensitivity, selectivity, antibacterial efficiency, and environmental friendliness. This paper reviews the synthesis strategies of metal-organic frameworks-molecularly imprinted polymers (MOF-MIP), highlighting their structural properties and innovative applications in microbial detection, which aim to inspire researchers in related fields. Looking ahead, future advancements in material science and biotechnology are expected to lead to widespread use of MOF-MIP composites in food safety, environmental monitoring, medical diagnosis, and public health-providing robust support against microbial pollution. By studying the collaborative mechanisms of MOF and MIP while optimizing design processes will enhance precision speed cost-effectiveness in microbial detection technology significantly contributing to human health and environmental safety.

Tailoring Corynebacterium glutamicum for Sustainable Biomanufacturing: From Traditional to Cutting-Edge Technologies

As the workhorse of industrial amino acid production, Corynebacterium glutamicum is the focus of this review, which provides a comprehensive overview of available techniques employed to engineer strains with desired traits. The review highlights both traditional and cutting-edge approaches with a brief introduction to the bacterium's physiology, serving as a foundation for understanding its metabolic capabilities and potential applications. Genome modulation techniques by contrasting traditional methods with CRISPR-based approaches, as well as transcription modulation strategies that enhance gene expression and metabolic flux, and high-throughput techniques that streamline strain development processes are summarized. Furthermore, the roles of artificial intelligence and machine learning in genetic engineering are explored, emphasizing their growing impact on strain development.

New Methodologies as Opportunities in the Study of Bacterial Biofilms, Including Food-Related Applications

Traditional food technologies, while essential, often face limitations in sensitivity, real-time detection, and adaptability to complex biological systems such as microbial biofilms. These constraints have created a growing demand for more advanced, precise, and non-invasive tools to ensure food safety and quality. In response to these challenges, cross-disciplinary technological integration has opened new opportunities for the food industry and public health, leveraging methods originally developed in other scientific fields. Although their industrial-scale implementation is still evolving, their application in research and pilot settings has already significantly improved our ability to detect and control biofilms, thereby strengthening food safety protocols. Advanced analytical techniques, the identification of pathogenic species and their virulence markers, and the screening of "natural" antimicrobial compounds can now be conceptualized as interconnected elements within a virtual framework centered on "food" and "biofilm". In this short review, starting from the basic concepts of biofilm and associated microorganisms, we highlight a selection of emerging analytical approaches-from optical methods, microfluidics, Atomic Force Microscopy (AFM), and biospeckle techniques to molecular strategies like CRISPR, qPCR, and NGS, and the use of organoids. Initially conceived for biomedical and biotechnological applications, these tools have recently demonstrated their value in food science by enhancing our understanding of biofilm behavior and supporting the discovery of novel anti-biofilm strategies.

CRISPR-guided base editor enables efficient and multiplex genome editing in bacterial cellulose-producing Komagataeibacter species

Bacterial cellulose (BC) is an extracellular polysaccharide produced by bacteria that has wide applications in the food industry, tissue engineering, and battery manufacturing. Genome editing of BC-producing Komagataeibacter species is expected to optimize BC production and its properties. However, the available technology can target only one gene at a time and requires foreign DNA templates, which may present a regulatory hurdle for genetically modified organisms. In this study, we developed a clustered regularly interspaced short palindromic repeats (CRISPR)-guided base editing method for Komagataeibacter species using Cas9 nickase and cytidine deaminase. Without foreign DNA templates, C-to-T conversions were performed within an 8 bp editing window with 90% efficiency. Double- and triple-gene editing was achieved with 80%-90% efficiency. Fusing uracil-DNA glycosylase with the base editor enabled C-to-G editing. The base editor worked efficiently with various Komagataeibacter species. Finally, mannitol metabolic genes were investigated using base-editing-mediated gene inactivation. This study provides a powerful tool for multiplex genome editing of Komagataeibacter species.

IMPORTANCE

Komagataeibacter, a bacterial genus belonging to the family Acetobacteraceae, has important applications in food and material biosynthesis. However, the genome editing of Komagataeibacter relies on traditional homologous recombination methods. Therefore, only one gene can be manipulated in each round using foreign DNA templates, which may present a regulatory hurdle for genetically modified organisms when microorganisms are used in the food industry. In this study, a powerful base editing technology was developed for Komagataeibacter species. C-to-T and C-to-G base conversions were efficiently implemented at up to three loci in the Komagataeibacter genome. This base editing system is expected to accelerate basic and applied research on Komagataeibacter species.

A universal and wide-range cytosine base editor via domain-inlaid and fidelity-optimized CRISPR-FrCas9

CRISPR-based base editor (BE) offer diverse editing options for genetic engineering of microorganisms, but its application is limited by protospacer adjacent motif (PAM) sequences, context preference, editing window, and off-target effects. Here, a series of iteratively improved cytosine base editors (CBEs) are constructed using the FrCas9 nickase (FrCas9n) with the unique PAM palindromic structure (NNTA) to alleviate these challenges. The deaminase domain-inlaid FrCas9n exhibits an editing range covering 38 nucleotides upstream and downstream of the palindromic PAM, without context preference, which is 6.3 times larger than that of traditional CBEs. Additionally, lower off-target editing is achieved when incorporating high-fidelity mutations at R61A and Q964A in FrCas9n, while maintaining high editing efficiency. The final CBE, HF-ID824-evoCDA-FrCas9n demonstrates broad applicability across different microbes such as Escherichia coli MG1655, Shewanella oneidensis MR-1, and Pseudomonas aeruginosa PAO1. Collectively, this tool offers robust gene editing for facilitating mechanistic studies, functional exploration, and protein evolution in microbes.

Synthetic evolution of Saccharomyces cerevisiae for biomanufacturing: Approaches and applications

The yeast Saccharomyces cerevisiae is a well-studied unicellular eukaryote with a significant role in the biomanufacturing of natural products, biofuels, and bulk and value-added chemicals, as well as the principal model eukaryotic organism utilized for fundamental research. Robust tools for building and optimizing yeast chassis cells were made possible by the quick development of synthetic biology, especially in engineering evolution. In this review, we focused on methods and tools from synthetic biology that are used to design and engineer S. cerevisiae's evolution. A detailed discussion was held regarding transcriptional regulation, template-dependent and template-free approaches. Furthermore, the applications of evolved S. cerevisiae were comprehensively summarized. These included improving environmental stress tolerance and raising cell metabolic performance in the production of biofuels and bulk and value-added chemicals. Finally, the future considerations were briefly discussed.

One-for-all gene inactivation via PAM-independent base editing in bacteria

Base editing is preferable for bacterial gene inactivation without generating double-strand breaks, requiring homology recombination, or highly efficient DNA delivery capability. However, the potential of base editing is limited by the adjoined dependence on the editing window and protospacer adjacent motif. Herein, we report an unconstrained base-editing system to enable the inactivation of any genes of interest in bacteria. We employed a dCas9 derivative, dSpRY, and activation-induced cytidine deaminase to build a protospacer adjacent motif-independent base editor. Then, we programmed the base editor to exclude the START codon of a gene of interest instead of introducing premature STOP codons to obtain a universal approach for gene inactivation, namely XSTART, with an overall efficiency approaching 100%. By using XSTART, we successfully manipulated the amino acid metabolisms in Escherichia coli, generating glutamine, arginine, and aspartate auxotrophic strains. While we observed a high frequency of off-target events as a trade-off for increased efficiency, refining the regulatory system of XSTART to limit expression levels reduced off-target events by over 60% without sacrificing efficiency, aligning our results with previously reported levels. Finally, the effectiveness of XSTART was also demonstrated in probiotic E. coli Nissle 1917 and photoautotrophic cyanobacterium Synechococcus elongatus, illustrating its potential in reprogramming diverse bacteria.

The rise and future of CRISPR-based approaches for high-throughput genomics

Clustered regularly interspaced short palindromic repeats (CRISPR) has revolutionized the field of genome editing. To circumvent the permanent modifications made by traditional CRISPR techniques and facilitate the study of both essential and nonessential genes, CRISPR interference (CRISPRi) was developed. This gene-silencing technique employs a deactivated Cas effector protein and a guide RNA to block transcription initiation or elongation. Continuous improvements and a better understanding of the mechanism of CRISPRi have expanded its scope, facilitating genome-wide high-throughput screens to investigate the genetic basis of phenotypes. Additionally, emerging CRISPR-based alternatives have further expanded the possibilities for genetic screening. This review delves into the mechanism of CRISPRi, compares it with other high-throughput gene-perturbation techniques, and highlights its superior capacities for studying complex microbial traits. We also explore the evolution of CRISPRi, emphasizing enhancements that have increased its capabilities, including multiplexing, inducibility, titratability, predictable knockdown efficacy, and adaptability to nonmodel microorganisms. Beyond CRISPRi, we discuss CRISPR activation, RNA-targeting CRISPR systems, and single-nucleotide resolution perturbation techniques for their potential in genome-wide high-throughput screens in microorganisms. Collectively, this review gives a comprehensive overview of the general workflow of a genome-wide CRISPRi screen, with an extensive discussion of strengths and weaknesses, future directions, and potential alternatives.

Dual genetic level modification engineering accelerate genome evolution of Corynebacterium glutamicum

High spontaneous mutation rate is crucial for obtaining ideal phenotype and exploring the relationship between genes and phenotype. How to break the genetic stability of organisms and increase the mutation frequency has become a research hotspot. Here, we present a practical and controllable evolutionary tool (oMut-Cgts) based on dual genetic level modification engineering for Corynebacterium glutamicum. Firstly, the modification engineering of transcription and replication levels based on RNA polymerase α subunit and DNA helicase Cgl0854 as the 'dock' of cytidine deaminase (pmCDA1) significantly increased the mutation rate, proving that the localization of pmCDA1 around transient ssDNA is necessary for genome mutation. Then, the combined modification and optimization of engineering at dual genetic level achieved 1.02 × 104-fold increased mutation rate. The genome sequencing revealed that the oMut-Cgts perform uniform and efficient C:G→T:A transitions on a genome-wide scale. Furthermore, oMut-Cgts-mediated rapid evolution of C. glutamicum with stress (acid, oxidative and ethanol) tolerance proved that the tool has powerful functions in multi-dimensional biological engineering (rapid phenotype evolution, gene function mining and protein evolution). The strategies for rapid genome evolution provided in this study are expected to be applicable to a variety of applications in all prokaryotic cells.

Efficient CRISPR-mediated C-to-T base editing in Komagataella phaffii

The nonconventional methylotrophic yeast Komagataella phaffii is widely applied in the production of industrial enzymes, pharmaceutical proteins, and various high-value chemicals. The development of robust and versatile genome editing tools for K. phaffii is crucial for the design of increasingly advanced cell factories. Here, we first developed a base editing method for K. phaffii based on the CRISPR-nCas9 system. We engineered 24 different base editor constructs, using a variety of promoters and cytidine deaminases (CDAs). The optimal base editor (PAOX2*-KpA3A-nCas9-KpUGI-DAS1TT) comprised a truncated AOX2 promoter (PAOX2*), a K. phaffii codon-optimized human APOBEC3A CDA (KpA3A), human codon-optimized nCas9 (D10A), and a K. phaffii codon-optimized uracil glycosylase inhibitor (KpUGI). This optimal base editor efficiently performed C-to-T editing in K. phaffii, with single-, double-, and triple-locus editing efficiencies of up to 96.0%, 65.0%, and 5.0%, respectively, within a 7-nucleotide window from C-18 to C-12. To expand the targetable genomic region, we also replaced nCas9 in the optimal base editor with nSpG and nSpRy, and achieved 50.0%-60.0% C-to-T editing efficiency for NGN-protospacer adjacent motif (PAM) sites and 20.0%-93.2% C-to-T editing efficiency for NRN-PAM sites, respectively. Therefore, these constructed base editors have emerged as powerful tools for gene function research, metabolic engineering, genetic improvement, and functional genomics research in K. phaffii.

CRISPR Tools for Engineering Prokaryotic Systems: Recent Advances and New Applications

In the past decades, the broad selection of CRISPR-Cas systems has revolutionized biotechnology by enabling multimodal genetic manipulation in diverse organisms. Rooted in a molecular engineering perspective, we recapitulate the different CRISPR components and how they can be designed for specific genetic engineering applications. We first introduce the repertoire of Cas proteins and tethered effectors used to program new biological functions through gene editing and gene regulation. We review current guide RNA (gRNA) design strategies and computational tools and how CRISPR-based genetic circuits can be constructed through regulated gRNA expression. Then, we present recent advances in CRISPR-based biosensing, bioproduction, and biotherapeutics across in vitro and in vivo prokaryotic systems. Finally, we discuss forthcoming applications in prokaryotic CRISPR technology that will transform synthetic biology principles in the near future.

Establishment of a selectable marker recycling system for iterative gene editing in Fusarium fujikuroi

Gibberellic acid (GA3) is a vital plant growth hormone widely used in agriculture. Currently, GA3 production relies on liquid fermentation by the filamentous fungus Fusarium fujikuroi. However, the lack of an effective selection marker recycling system hampers the application of metabolic engineering technology in F. fujikuroi, as multiple-gene editing and positive-strain screening still rely on a limited number of antibiotics. In this study, we developed a strategy using pyr4-blaster and CRISPR/Cas9 tools for recycling orotidine-5'-phosphate decarboxylase (Pyr4) selection markers. We demonstrated the effectiveness of this method for iterative gene integration and large gene-cluster deletion. We also successfully improved GA3 titers by overexpressing geranylgeranyl pyrophosphate synthase and truncated 3-hydroxy-3-methyl glutaryl coenzyme A reductase, which rewired the GA3 biosynthesis pathway. These results highlight the efficiency of our established system in recycling selection markers during iterative gene editing events. Moreover, the selection marker recycling system lays the foundation for further research on metabolic engineering for GA3 industrial production.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Rapid screening of point mutations by mismatch amplification mutation assay PCR

Metabolic engineering frequently makes use of point mutation and saturation mutation library creation. At present, sequencing is the only reliable and direct technique to detect point mutation and screen saturation mutation library. In this study, mismatch amplification mutation assay (MAMA) PCR was used to detect point mutation and screen saturation mutation library. In order to fine-tune the expression of odhA encoding 2-oxoglutarate dehydrogenase E1 component, a saturating mutant library of the RBS of odhA was created in Corynebacterium glutamicum P12 based on the CRISPR-Cas2a genome editing system, which increased the L-proline production by 81.3%. MAMA PCR was used to filter out 42% of the non-mutant transformants in the mutant library, which effectively reduced the workload of the subsequent fermentation test and the number of sequenced samples. The rapid and sensitive MAMA-PCR method established in this study provides a general strategy for detecting point mutations and improving the efficiency of mutation library screening. KEY POINTS: • MAMA PCR was optimized and developed to detect point mutation. • MAMA PCR greatly improves the screening efficiency of point mutation. • Attenuation of odhA expression in P12 effectively improves proline production.

Nonsterilized Fermentation of Crude Glycerol for Polyhydroxybutyrate Production by Metabolically Engineered Vibrio natriegens

Polyhydroxybutyrate (PHB) is an attractive biodegradable polymer that can be produced through the microbial fermentation of organic wastes or wastewater. However, its mass production has been restricted by the poor utilization of organic wastes due to the presence of inhibitory substances, slow microbial growth, and high energy input required for feedstock sterilization. Here, Vibrio natriegens, a fast-growing bacterium with a broad substrate spectrum and high tolerance to salt and toxic substances, was genetically engineered to enable efficient PHB production from nonsterilized fermentation of organic wastes. The key genes encoding the PHB biosynthesis pathway of V. natriegens were identified through base editing and overexpressed. The metabolically engineered strain showed 166-fold higher PHB content (34.95 wt %) than the wide type when using glycerol as a substrate. Enhanced PHB production was also achieved when other sugars were used as feedstock. Importantly, it outperformed the engineered Escherichia coli MG1655 in PHB productivity (0.053 g/L/h) and tolerance to toxic substances in crude glycerol, without obvious activity decline under nonsterilized fermentation conditions. Our work demonstrates the great potential of engineered V. natriegens for low-cost PHB bioproduction and lays a foundation for exploiting this strain as a next-generation model chassis microorganism in synthetic biology.

Characterization of the AcrIIC1 anti‒CRISPR protein for Cas9‒based genome engineering in E. coli

Anti-CRISPR proteins (Acrs) block the activity of CRISPR-associated (Cas) proteins, either by inhibiting DNA interference or by preventing crRNA loading and complex formation. Although the main use of Acrs in genome engineering applications is to lower the cleavage activity of Cas proteins, they can also be instrumental for various other CRISPR-based applications. Here, we explore the genome editing potential of the thermoactive type II-C Cas9 variants from Geobacillus thermodenitrificans T12 (ThermoCas9) and Geobacillus stearothermophilus (GeoCas9) in Escherichia coli. We then demonstrate that the AcrIIC1 protein from Neisseria meningitidis robustly inhibits their DNA cleavage activity, but not their DNA binding capacity. Finally, we exploit these AcrIIC1:Cas9 complexes for gene silencing and base-editing, developing Acr base-editing tools. With these tools we pave the way for future engineering applications in mesophilic and thermophilic bacteria combining the activities of Acr and CRISPR-Cas proteins.

Base editing enables duplex point mutagenesis in Clostridium autoethanogenum at the price of numerous off-target mutations

Base editors are recent multiplex gene editing tools derived from the Cas9 nuclease of Streptomyces pyogenes. They can target and modify a single nucleotide in the genome without inducing double-strand breaks (DSB) of the DNA helix. As such, they hold great potential for the engineering of microbes that lack effective DSB repair pathways such as homologous recombination (HR) or non-homologous end-joining (NHEJ). However, few applications of base editors have been reported in prokaryotes to date, and their advantages and drawbacks have not been systematically reported. Here, we used the base editors Target-AID and Target-AID-NG to introduce nonsense mutations into four different coding sequences of the industrially relevant Gram-positive bacterium Clostridium autoethanogenum. While up to two loci could be edited simultaneously using a variety of multiplexing strategies, most colonies exhibited mixed genotypes and most available protospacers led to undesired mutations within the targeted editing window. Additionally, fifteen off-target mutations were detected by sequencing the genome of the resulting strain, among them seven single-nucleotide polymorphisms (SNP) in or near loci bearing some similarity with the targeted protospacers, one 15 nt duplication, and one 12 kb deletion which removed uracil DNA glycosylase (UDG), a key DNA repair enzyme thought to be an obstacle to base editing mutagenesis. A strategy to process prokaryotic single-guide RNA arrays by exploiting tRNA maturation mechanisms is also illustrated.

Powerful Microbial Base-Editing Toolbox: From Optimization Strategies to Versatile Applications

Base editors (BE) based on CRISPR systems are practical gene-editing tools which continue to drive frontier advances of life sciences. BEs are able to efficiently induce point mutations at target sites without double-stranded DNA cleavage. Hence, they are widely employed in the fields of microbial genome engineering. As applications of BEs continue to expand, the demands for base-editing efficiency, fidelity, and versatility are also on the rise. In recent years, a series of optimization strategies for BEs have been developed. By engineering the core components of BEs or adopting different assembly methods, the performance of BEs has been well optimized. Moreover, series of newly established BEs have significantly expanded the base-editing toolsets. In this Review, we will summarize the current efforts for BE optimization, introduce several novel BEs with versatility, and look forward to the broadened applications for industrial microorganisms.

Developing a PAM-Flexible CRISPR-Mediated Dual-Deaminase Base Editor to Regulate Extracellular Electron Transport in Shewanella oneidensis

Shewanella oneidensis MR-1 is a promising electroactive microorganism in environmental bioremediation, bioenergy generation, and bioproduct synthesis. Accelerating the extracellular electron transfer (EET) pathway that enables efficient electron exchange between microbes and extracellular substances is critical for improving its electrochemical properties. However, the potential genomic engineering strategies for enhancing EET capabilities are still limited. Here, we developed a clustered regularly interspaced short palindromic repeats (CRISPR)-mediated dual-deaminase base editing system, named in situ protospacer-adjacent motif (PAM)-flexible dual base editing regulatory system (iSpider), for precise and high-throughput genomic manipulation. The iSpider enabled simultaneous C-to-T and A-to-G conversions with high diversity and efficiency in S. oneidensis. By weakening DNA glycosylase-based repair pathway and tethering two copies of adenosine deaminase, the A-to-G editing efficiency was obviously improved. As a proof-of-concept study, the iSpider was adapted to achieve multiplexed base editing for the regulation of the riboflavin biosynthesis pathway, and the optimized strain showed an approximately three-fold increase in riboflavin production. Moreover, the iSpider was also applied to evolve the performance of an inner membrane component CymA implicated in EET, and one beneficial mutant facilitating electron transfer could be rapidly identified. Taken together, our study demonstrates that the iSpider allows efficient base editing in a PAM-flexible manner, providing insights into the design of novel genomic tools for Shewanella engineering.

Cytosine base editing in cyanobacteria by repressing archaic Type IV uracil-DNA glycosylase

Base editing enables precise gene editing without requiring donor DNA or double-stranded breaks. To facilitate base editing tools, a uracil DNA glycosylase inhibitor (UGI) was fused to cytidine deaminase-Cas nickase to inhibit uracil DNA glycosylase (UDG). Herein, we revealed that the bacteriophage PBS2-derived UGI of the cytosine base editor (CBE) could not inhibit archaic Type IV UDG in oligoploid cyanobacteria. To overcome the limitation of the CBE, dCas12a-assisted gene repression of the udg allowed base editing at the desired targets with up to 100% mutation frequencies, and yielded correct phenotypes of desired mutants in cyanobacteria. Compared with the original CBE (BE3), base editing was analyzed within a broader C4-C16 window with a strong TC-motif preference. Using multiplexed CyanoCBE, while udg was repressed, simultaneous base editing at two different sites was achieved with lower mutation frequencies than single CBE. Our discovery of a Type IV UDG that is not inhibited by the UGI of the CBE in cyanobacteria and the development of dCas12a-mediated base editing should facilitate the application of base editing not only in cyanobacteria, but also in archaea and green algae that possess Type IV UDGs. We revealed the bacteriophage-derived UGI of the base editor did not repress Type IV UDG in cyanobacteria. To overcome the limitation, orthogonal dCas12a interference was successfully applied to repress the UDG gene expression in cyanobacteria during base editing occurred, yielding a premature translational termination at desired targets. This study will open a new opportunity to perform base editing with Type IV UDGs in archaea and green algae.

Biosystem design of Corynebacterium glutamicum for bioproduction

Corynebacterium glutamicum, a natural glutamate-producing bacterium adopted for industrial production of amino acids, has been extensively explored recently for high-level biosynthesis of amino acid derivatives, bulk chemicals such as organic acids and short-chain alcohols, aromatics, and natural products, including polyphenols and terpenoids. Here, we review the recent advances with a focus on biosystem design principles, metabolic characterization and modeling, omics analysis, utilization of nonmodel feedstock, emerging CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) tools for Corynebacterium strain engineering, biosensors, and novel strains of C. glutamicum. Future research directions for developing C. glutamicum cell factories are also discussed.

The expanding CRISPR toolbox for natural product discovery and engineering in filamentous fungi

Covering: up to May 2022Fungal genetics has transformed natural product research by enabling the elucidation of cryptic metabolites and biosynthetic steps. The enhanced capability to add, subtract, modulate, and rewrite genes via CRISPR/Cas technologies has opened up avenues for the manipulation of biosynthetic gene clusters across diverse filamentous fungi. This review discusses the innovative and diverse strategies for fungal natural product discovery and engineering made possible by CRISPR/Cas-based tools. We also provide a guide into multiple angles of CRISPR/Cas experiment design, and discuss current gaps in genetic tool development for filamentous fungi and the promising opportunities for natural product research.

Efficient CRISPR-Cas9 based cytosine base editors for phytopathogenic bacteria

Phytopathogenic bacteria play important roles in plant productivity, and developments in gene editing have potential for enhancing the genetic tools for the identification of critical genes in the pathogenesis process. CRISPR-based genome editing variants have been developed for a wide range of applications in eukaryotes and prokaryotes. However, the unique mechanisms of different hosts restrict the wide adaptation for specific applications. Here, CRISPR-dCas9 (dead Cas9) and nCas9 (Cas9 nickase) deaminase vectors were developed for a broad range of phytopathogenic bacteria. A gene for a dCas9 or nCas9, cytosine deaminase CDA1, and glycosylase inhibitor fusion protein (cytosine base editor, or CBE) was applied to base editing under the control of different promoters. Results showed that the RecA promoter led to nearly 100% modification of the target region. When residing on the broad host range plasmid pHM1, CBE_RecAp is efficient in creating base edits in strains of Xanthomonas, Pseudomonas, Erwinia and Agrobacterium. CBE based on nCas9 extended the editing window and produced a significantly higher editing rate in Pseudomonas. Strains with nonsynonymous mutations in test genes displayed expected phenotypes. By multiplexing guide RNA genes, the vectors can modify up to four genes in a single round of editing. Whole-genome sequencing of base-edited isolates of Xanthomonas oryzae pv. oryzae revealed guide RNA-independent off-target mutations. Further modifications of the CBE, using a CDA1 variant (CBE_RecAp-A) reduced off-target effects, providing an improved editing tool for a broad group of phytopathogenic bacteria.

Cytosine Base Editing in Bacteria

Base editing is a new genome editing technology that enables DNA base mutations without requiring double-stranded DNA backbone cleavage or a donor template. It has been widely used for genome engineering of eukaryotic and prokaryotic microorganisms. In this chapter, we describe a routine protocol for cytosine base editing in two model bacteria Corynebacterium glutamicum and Bacillus subtilis. The protocol can be adapted to base editing in other bacteria with modifications.

High-Fidelity Cytosine Base Editing in a GC-Rich Corynebacterium glutamicum with Reduced DNA Off-Target Editing Effects

Genome editing technology is a powerful tool for programming microbial cell factories. However, rat APOBEC1-derived cytosine base editor (CBE) that converts C•G to T•A at target genes induced DNA off-targets, regardless of single-guide RNA (sgRNA) sequences. Although the high efficiencies of the bacterial CBEs have been developed, a risk of unidentified off-targets impeded genome editing for microbial cell factories. To address the issues, we demonstrate the genome engineering of Corynebacterium glutamicum as a GC-rich model industrial bacterium by generating premature termination codons (PTCs) in desired genes using high-fidelity cytosine base editors (CBEs). Through this CBE-STOP approach of introducing specific cytosine conversions, we constructed several single-gene-inactivated strains for three genes (ldh, idsA, and pyc) with high base editing efficiencies of average 95.6% (n = 45, C6 position) and the highest success rate of up to 100% for PTCs and ultimately developed a strain with five genes (ldh, actA, ackA, pqo, and pta) that were inactivated sequentially for enhancing succinate production. Although these mutant strains showed the desired phenotypes, whole-genome sequencing (WGS) data revealed that genome-wide point mutations occurred in each strain and further accumulated according to the duration of CBE plasmids. To lower the undesirable mutations, high-fidelity CBEs (pCoryne-YE1-BE3 and pCoryne-BE3-R132E) was employed for single or multiplexed genome editing in C. glutamicum, resulting in drastically reduced sgRNA-independent off-targets. Thus, we provide a CRISPR-assisted bacterial genome engineering tool with an average high efficiency of 90.5% (n = 76, C5 or C6 position) at the desired targets. IMPORTANCE Rat APOBEC1-derived cytosine base editor (CBE) that converts C•G to T•A at target genes induced DNA off-targets, regardless of single-guide RNA (sgRNA) sequences. Although the high efficiencies of bacterial CBEs have been developed, a risk of unidentified off-targets impeded genome editing for microbial cell factories. To address the issues, we identified the DNA off-targets for single and multiple genome engineering of the industrial bacterium Corynebacterium glutamicum using whole-genome sequencing. Further, we developed the high-fidelity (HF)-CBE with significantly reduced off-targets with comparable efficiency and precision. We believe that our DNA off-target analysis and the HF-CBE can promote CRISPR-assisted genome engineering over conventional gene manipulation tools by providing a markerless genetic tool without need for a foreign DNA donor.

Synthetic biology promotes the capture of CO2 to produce fatty acid derivatives in microbial cell factories

Environmental problems such as greenhouse effect, the consumption of fossil energy, and the increase of human demand for energy are becoming more and more serious, which force researcher to turn their attention to the reduction of CO2 and the development of renewable energy. Unsafety, easy to lead to secondary environmental pollution, cost inefficiency, and other problems limit the development of conventional CO2 capture technology. In recent years, many microorganisms have attracted much attention to capture CO2 and synthesize valuable products directly. Fatty acid derivatives (e.g., fatty acid esters, fatty alcohols, and aliphatic hydrocarbons), which can be used as a kind of environmentally friendly and renewable biofuels, are sustainable substitutes for fossil energy. In this review, conventional CO2 capture techniques pathways, microbial CO2 concentration mechanisms and fixation pathways were introduced. Then, the metabolic pathway and progress of direct production of fatty acid derivatives from CO2 in microbial cell factories were discussed. The synthetic biology means used to design engineering microorganisms and optimize their metabolic pathways were depicted, with final discussion on the potential of optoelectronic-microbial integrated capture and production systems.

DNA base editing in nuclear and organellar genomes

Genome editing continues to revolutionize biological research. Due to its simplicity and flexibility, CRISPR/Cas-based editing has become the preferred technology in most systems. Cas nucleases tolerate fusion to large protein domains, thus allowing combination of their DNA recognition properties with new enzymatic activities. Fusion to nucleoside deaminase or reverse transcriptase domains has produced base editors and prime editors that, instead of generating double-strand breaks in the target sequence, induce site-specific alterations of single (or a few adjacent) nucleotides. The availability of protein-only genome editing reagents based on transcription activator-like effectors has enabled the extension of base editing to the genomes of chloroplasts and mitochondria. In this review, we summarize currently available base editing methods for nuclear and organellar genomes. We highlight recent advances with improving precision, specificity, and efficiency and discuss current limitations and future challenges. We also provide a brief overview of applications in agricultural biotechnology and gene therapy.

Microbial fingerprints of methanation in a hybrid electric-biological anaerobic digestion

Biomethane as a sustainable, alternative, and carbon-neutral renewable energy source to fossil fuels is highly needed to alleviate the global energy crisis and climate change. The conventional anaerobic digestion (AD) process for biomethane production from waste(water) streams has been widely employed while struggling with a low production rate, low biogas qualities, and frequent instability. The electric-biologically hybrid microbial electrochemical anaerobic digestion system (MEC-AD) prospects more stable and robust biomethane generation, which facilitates complex organic substrates degradation and mediates functional microbial populations by giving a small input power (commonly voltages < 1.0 V), mainly enhancing the communication between electroactive microorganisms and (electro)methanogens. Despite numerous bioreactor tests and studies that have been conducted, based on the MEC-AD systems, the integrated microbial fingerprints, and cooperation, accelerating substrate degradation, and biomethane production, have not been fully summarized. Herein, we present a comprehensive review of this novel developing biotechnology, beginning with the principles of MEC-AD. First, we examine the fundamentals, configurations, classifications, and influential factors of the whole system's performances (reactor types, applied voltages, temperatures, conductive materials, etc.,). Second, extracellular electron transfer either between diverse microbes or between microbes and electrodes for enhanced biomethane production are analyzed. Third, we further conclude (electro)methanogenesis, and microbial interactions, and construct ecological networks of microbial consortia in MEC-AD. Finally, future development and perspectives on MEC-AD for biomethane production are proposed.

Engineering of the Translesion DNA Synthesis Pathway Enables Controllable C-to-G and C-to-A Base Editing in Corynebacterium glutamicum

Expanding the base conversion type is expected to largely broaden the application of base editing, whereas it requires decipherment of the machinery controlling the editing outcome. Here, we discovered that the DNA polymerase V-mediated translesion DNA synthesis (TLS) pathway controlled the C-to-A editing by a glycosylase base editor (GBE) in Escherichia coli. However, C-to-G conversion was surprisingly found to be the main product of the GBE in Corynebacterium glutamicum and subsequent gene inactivation identified the decisive TLS enzymes. Introduction of the E. coli TLS pathway into a TLS-deficient C. glutamicum mutant completely changed the GBE outcome from C-to-G to C-to-A. Combining the canonical C-to-T editor, a pioneering C-to-N base editing toolbox was established in C. glutamicum. The expanded base conversion capability produces greater genetic diversity and promotes the application of base editing in gene inactivation and protein evolution. This study demonstrates the possibility of engineering TLS systems to develop advanced genome editing tools.

Highly efficient multiplex base editing: One-shot deactivation of eight genes in Shewanella oneidensis MR-1

Obtaining electroactive microbes capable of efficient extracellular electron transfer is a large undertaking for the scalability of bio-electrochemical systems. Inevitably, researchers need to pursue the co-modification of multiple genes rather than expecting that modification of a single gene would make a significant contribution to improving extracellular electron transfer rates. Base editing has enabled highly-efficient gene deactivation in model electroactive microbe Shewanella oneidensis MR-1. Since multiplexed application of base editing is still limited by its low throughput procedure, we thus here develop a rapid and efficient multiplex base editing system in S. oneidensis. Four approaches to express multiple gRNAs were assessed firstly, and transcription of each gRNA cassette into a monocistronic unit was validated as a more favorable option than transcription of multiple gRNAs into a polycistronic cluster. Then, a smart scheme was designed to deliver one-pot assembly of multiple gRNAs. 3, 5, and 8 genes were deactivated using this system with editing efficiency of 83.3%, 100% and 12.5%, respectively. To offer some nonrepetitive components as alternatives genetic parts of sgRNA cassette, different promoters, handles, and terminators were screened. This multiplex base editing tool was finally adopted to simultaneously deactivate eight genes that were identified as significantly downregulated targets in transcriptome analysis of riboflavin-overproducing strain and control strain. The maximum power density of the multiplex engineered strain HRF(8BE) in microbial fuel cells was 1108.1 mW/m², which was 21.67 times higher than that of the wild-type strain. This highly efficient multiplexed base editing tool elevates our ability of genome manipulation and combinatorial engineering in Shewanella, and may provide valuable insights in fundamental and applied research of extracellular electron transfer.

Biomolecular Insights into Extracellular Pollutant Reduction Pathways of Geobacter sulfurreducens Using a Base Editor System

Geobacter species are critically involved in elemental biogeochemical cycling and environmental bioremediation processes via extracellular electron transfer (EET), but the underlying biomolecular mechanisms remain elusive due to lack of effective analytical tools to explore into complicated EET networks. Here, a simple and highly efficient cytosine base editor was developed for engineering of the slow-growing Geobacter sulfurreducens (a doubling time of 5 h with acetate as the electron donor and fumarate as the electron acceptor). A single-plasmid cytosine base editor (pYYDT-BE) was constructed in G. sulfurreducens by fusing cytosine deaminase, Cas9 nickase, and a uracil glycosylase inhibitor. This system enabled single-locus editing at 100% efficiency and showed obvious preference at the cytosines in a TC, AC, or CC context than in a GC context. Gene inactivation tests confirmed that it could effectively edit 87.7-93.4% genes of the entire genome in nine model Geobacter species. With the aid of this base editor to construct a series of G. sulfurreducens mutants, we unveiled important roles of both pili and outer membrane c-type cytochromes in long-range EET, thereby providing important evidence to clarify the long-term controversy surrounding their specific roles. Furthermore, we find that pili were also involved in the extracellular reduction of uranium and clarified the key roles of the ExtHIJKL conduit complex and outer membrane c-type cytochromes in the selenite reduction process. This work developed an effective base editor tool for the genetic modification of Geobacter species and provided new insights into the EET network, which lay a basis for a better understanding and engineering of these microbes to favor environmental applications.

Base editor enables rational genome-scale functional screening for enhanced industrial phenotypes in Corynebacterium glutamicum

Genome-scale functional screening accelerates comprehensive assessment of gene function in cells. Here, we have established a genome-scale loss-of-function screening strategy that combined a cytosine base editor with approximately 12,000 parallel sgRNAs targeting 98.1% of total genes in Corynebacterium glutamicum ATCC 13032. Unlike previous data processing methods developed in yeast or mammalian cells, we developed a new data processing procedure to locate candidate genes by statistical sgRNA enrichment analysis. Known and novel functional genes related to 5-fluorouracil resistance, 5-fluoroorotate resistance, oxidative stress tolerance, or furfural tolerance have been identified. In particular, purU and serA were proven to be related to the furfural tolerance in C. glutamicum. A cloud platform named FSsgRNA-Analyzer was provided to accelerate sequencing data processing for CRISPR-based functional screening. Our method would be broadly useful to functional genomics study and strain engineering in other microorganisms.

Data-Driven Synthetic Cell Factories Development for Industrial Biomanufacturing

Revolutionary breakthroughs in artificial intelligence (AI) and machine learning (ML) have had a profound impact on a wide range of scientific disciplines, including the development of artificial cell factories for biomanufacturing. In this paper, we review the latest studies on the application of data-driven methods for the design of new proteins, pathways, and strains. We first briefly introduce the various types of data and databases relevant to industrial biomanufacturing, which are the basis for data-driven research. Different types of algorithms, including traditional ML and more recent deep learning methods, are also presented. We then demonstrate how these data-based approaches can be applied to address various issues in cell factory development using examples from recent studies, including the prediction of protein function, improvement of metabolic models, and estimation of missing kinetic parameters, design of non-natural biosynthesis pathways, and pathway optimization. In the last section, we discuss the current limitations of these data-driven approaches and propose that data-driven methods should be integrated with mechanistic models to complement each other and facilitate the development of synthetic strains for industrial biomanufacturing.

DeepTESR: A Deep Learning Framework to Predict the Degree of Translational Elongation Short Ramp for Gene Expression Control

Controlling translational elongation is essential for efficient protein synthesis. Ribosome profiling has revealed that the speed of ribosome movement is correlated with translational efficiency in the translational elongation ramp. In this work, we present a new deep learning model, called DeepTESR, to predict the degree of translational elongation short ramp (TESR) from mRNA sequence. The proposed deep learning model exhibited superior performance in predicting the TESR scores for 226 981 TESR sequences, resulting in the mean absolute error (MAE) of 0.285 and a coefficient of determination R² of 0.627, superior to the conventional machine learning models (e.g., MAE of 0.335 and R² of 0.571 for LightGBM). We experimentally validated that heterologous fluorescence expression of proteins with randomly selected TESR was moderately correlated with the predictions. Furthermore, a genome-wide analysis of TESR prediction in the 4305 coding sequences of Escherichia coli showed conserved TESRs over the clusters of orthologous groups. In this sense, DeepTESR can be used to predict the degree of TESR for gene expression control and to decipher the mechanism of translational control with ribosome profiling. DeepTESR is available at https://github.com/fmblab/DeepTESR.

Engineering microbial systems for the production and functionalization of biomaterialsBiomaterials engineering with microorganisms

A new trend in biomaterials synthesis is harnessing the production of microorganisms, owing to the low cost and sustainability. Because microorganisms use DNA as a production code, it is possible for humans to reprogram these cells and thus build living factories for the production of biomaterials. Over the past decade, advances in genetic engineering have enabled the development of various intriguing biomaterials with useful properties, with commercially available biomaterials representing only a few of these. In this review, we discuss the common strategies for the production of bulk and commodity biogenic polymers, and highlight several notable approaches such as modular protein engineering and pathway optimization in achieving these goals. We finally investigate the available synthetic biology tools that allow engineering of living materials, and discuss how this emerging class of materials has expanded the application scope of biomaterials.

CRISPR/Cas genome editing perspectives for barley breeding

The CRISPR/Cas9 technology shows potential to improve crop breeding efficiency and antiviral defense. The interest in DNA editing in crops has grown due to the possibility of increasing the resistance of different plants to many viruses. Our aim was to create an elite disease-resistant local barley cultivar using CRISPR/Cas9 biotechnology. For this purpose, we used CRISPR/Cas 9-eIF4E with the eukaryotic translation initiation factor 4E (eIF4E) barley gene to edit the genomes of five local Kazakhstan barley cultivars. After identifying the single guide RNA (sgRNA) target sequences, they were synthesized and cloned into the CRISPR-plant vector before being introduced into barley cells via our own patented Agrobacterium germ-line transformation technique. Barley plants eIF4E-modified were successfully obtained and were resistant to virus infection. Based on our research, the CRISPR/Cas9 system for plant genome editing could be a prospect for applying this breakthrough biotechnology in barley breeding.

CRISPR-Mediated Base Editing: From Precise Point Mutation to Genome-Wide Engineering in Nonmodel Microbes

Nonmodel microbes with unique and diverse metabolisms have become rising stars in synthetic biology; however, the lack of efficient gene engineering techniques still hinders their development. Recently, the use of base editors has emerged as a versatile method for gene engineering in a wide range of organisms including nonmodel microbes. This method is a fusion of impaired CRISPR/Cas9 nuclease and base deaminase, enabling the precise point mutation at the target without inducing homologous recombination. This review updates the latest advancement of base editors in microbes, including the conclusion of all microbes that have been researched by base editors, the introduction of newly developed base editors, and their applications. We provide a list that comprehensively concludes specific applications of BEs in nonmodel microbes, which play important roles in industrial, agricultural, and clinical fields. We also present some microbes in which BEs have not been fully established, in the hope that they are explored further and so that other microbial species can achieve arbitrary base conversions. The current obstacles facing BEs and solutions are put forward. Lastly, the highly efficient BEs and other developed versions for genome-wide reprogramming of cells are discussed, showing great potential for future engineering of nonmodel microbes.

Modulating DNA Repair Pathways to Diversify Genomic Alterations in Saccharomyces cerevisiae

Nuclease based genome editing systems have emerged as powerful tools to drive genomic alterations and enhance genome evolution via precise engineering in the various human and microbial cells. However, error-prone DNA repair has not been well studied previously to generate diverse genomic alterations and novel phenotypes. Here, we systematically investigated the potential interplay between DNA double strand break (DSB) repair and genome editing tools, and found that modulating the DSB end resection proteins could significantly improve mutational efficiency and diversity without exogenous DNA template in yeast. Deleting SAE2, EXO1, or FUN30, or overexpressing MRE11-H125N (nuclease-dead allele of MRE11), for DSB end resection markedly increased the efficiency of CRISPR/SpCas9 (more than 22-fold) and CRISPR/AsCpf1 (more than 30-fold)-induced mutagenesis. Deleting SAE2 or overexpressing MRE11-H125N substantially diversified CRISPR/SpCas9 or AsCpf1-induced mutation 2–3-fold at URA3 locus, and 3–5-fold at ADE2 locus. Thus, the error-prone DNA repair protein was employed to develop a novel mutagenic genome editing (mGE) strategy, which can increase the mutation numbers and effectively improve the ethanol/glycerol ratio of Saccharomyces cerevisiae through modulating the expression of FPS1 and GPD1. This study highlighted the feasibility of potentially reshaping the capability of genome editing by regulating the different DSB repair proteins and can thus expand the application of genome editing in diversifying gene expression and enhancing genome evolution.

IMPORTANCE Most of the published papers about nuclease-assisted genome editing focused on precision engineering in human cells. However, the topic of inducing mutagenesis via error-prone repair has often been ignored in yeast. In this study, we reported that perturbing DNA repair, especially modifications of the various DSB end resection-related proteins, could greatly improve the mutational efficiency and diversity, and thus functionally reshape the capability of the different genome editing tools without requiring an exogenous DNA template in yeast. Specifically, mutagenic genome editing (mGE) was developed based on CRISPR/AsCpf1 and MRE11-H125N overexpression, and used to generate promoters of different strengths more efficiently. Thus, this work provides a novel method to diversify gene expression and enhance genome evolution.

Development of Whole Genome-Scale Base Editing Toolbox to Promote Efficiency of Extracellular Electron Transfer in Shewanella oneidensis MR-1

Shewanella oneidensis MR-1, as a model electroactive microorganism (EAM) for extracellular electron transfer (EET) study, plays a key role in advancing practical applications of bio-electrochemical systems (BES). Efficient genome-level manipulation tools are vital to promote EET efficiency; thus, a powerful and rapid base editing toolbox in S. oneidensis MR-1 is developed. Firstly a CRISPR/dCas9-AID base editor that shows a relatively narrow editing window restricted to the "-20 to -16" range upstream of the protospacer adjacent motif (PAM) is constructed. Cas9 is also confined by its native PAM requirement, NGG. Then to expand the editable scope, the sgRNA and the Cas-protein to broaden the editing window to "-22 to -9" upstream of the PAM are engineered, and the PAM field to NNN is opened up. Consequently, the coverage of the editable gene is expanded from 89% to nearly 100% in S. oneidensis MR-1. This whole genome-scale cytidine deaminase-based base editing toolbox (WGcBE) is applied to regulate the cell length and the biofilm morphology, which enhances the EET efficiency by 6.7-fold. WGcBE enables an efficient deactivation of genes with full genome coverage, which would contribute to the in-depth and multi-faceted EET study in Shewanella.

Controlling pathogenic risks of water treatment biotechnologies at the source by genetic editing means

Antimicrobial-resistant pathogens in the environment and wastewater treatment systems, many of which are also important pollutant degraders and are difficult to control by traditional disinfection approaches, have become an unprecedented treat to ecological security and human health. Here, we propose the adoption of genetic editing techniques as a highly targeted, efficient and simple tool to control the risks of environmental pathogens at the source. An 'all-in-one' plasmid system was constructed in Aeromonas hydrophila to accurately identify and selectively inactivate multiple key virulence factor genes and antibiotic resistance genes via base editing, enabling significantly suppressed bacterial virulence and resistance without impairing their normal phenotype and pollutant-degradation functions. Its safe application for bioaugmented treatment of synthetic textile wastewater was also demonstrated. This genetic-editing technique may offer a promising solution to control the health risks of environmental microorganisms via targeted gene inactivation, thereby facilitating safer application of water treatment biotechnologies.

Yeast synthetic biology advances biofuel production

Increasing concerns of environmental impacts and global warming calls for urgent need to switch from use of fossil fuels to renewable technologies. Biofuels represent attractive alternatives of fossil fuels and have gained continuous attentions. Through the use of synthetic biology it has become possible to engineer microbial cell factories for efficient biofuel production in a more precise and efficient manner. Here, we review advances on yeast-based biofuel production. Following an overview of synthetic biology impacts on biofuel production, we review recent advancements on the design, build, test, learn steps of yeast-based biofuel production, and end with discussion of challenges associated with use of synthetic biology for developing novel processes for biofuel production.

Progression and application of CRISPR-Cas genomic editors

Base editing technology is an efficient tool for genome editing, particularly in the correction of base mutations. Diverse base editing systems were developed according to the dCas9 or nCas9 linked with different deaminase or reverse transcriptase in the editors, including ABEs, CBEs, PEs and dual-functional of base editor (such as CGBE1, A&C-BEmax, ACBE, etc.). Currently, Base editing technology has been widely applied to various fields such as microorganisms, plants, animals and medicine for basic research and therapeutics. Here, we reviewed the advancement of base editing technology. We also discussed the application of base editors in different areas in the future.

Applications and challenges of CRISPR-Cas gene-editing to disease treatment in clinics

Clustered regularly interspaced short palindromic repeats (CRISPR)-associated systems (Cas) are efficient tools for targeting specific genes for laboratory research, agricultural engineering, biotechnology, and human disease treatment. Cas9, by far the most extensively used gene-editing nuclease, has shown great promise for the treatment of hereditary diseases, viral infection, cancers, and so on. Recent reports have revealed that some other types of CRISPR-Cas systems may also have surprising potential to join the fray as gene-editing tools for various applications. Despite the rapid progress in basic research and clinical tests, some underlying problems present continuous, significant challenges, such as editing efficiency, relative difficulty in delivery, off-target effects, immunogenicity, etc. This article summarizes the applications of CRISPR-Cas from bench to bedside and highlights the current obstacles that may limit the usage of CRISPR-Cas systems as gene-editing toolkits in precision medicine and offer some viewpoints that may help to tackle these challenges and facilitate technical development. CRISPR-Cas systems, as a powerful gene-editing approach, will offer great hopes in clinical treatments for many individuals with currently incurable diseases.

Stress tolerance enhancement via SPT15 base editing in Saccharomyces cerevisiae

BACKGROUND

Saccharomyces cerevisiae is widely used in traditional brewing and modern fermentation industries to produce biofuels, chemicals and other bioproducts, but challenged by various harsh industrial conditions, such as hyperosmotic, thermal and ethanol stresses. Thus, its stress tolerance enhancement has been attracting broad interests. Recently, CRISPR/Cas-based genome editing technology offers unprecedented tools to explore genetic modifications and performance improvement of S. cerevisiae.

RESULTS

Here, we presented that the Target-AID (activation-induced cytidine deaminase) base editor of enabling C-to-T substitutions could be harnessed to generate in situ nucleotide changes on the S. cerevisiae genome, thereby introducing protein point mutations in cells. The general transcription factor gene SPT15 was targeted, and total 36 mutants with diversified stress tolerances were obtained. Among them, the 18 tolerant mutants against hyperosmotic, thermal and ethanol stresses showed more than 1.5-fold increases of fermentation capacities. These mutations were mainly enriched at the N-terminal region and the convex surface of the saddle-shaped structure of Spt15. Comparative transcriptome analysis of three most stress-tolerant (A140G, P169A and R238K) and two most stress-sensitive (S118L and L214V) mutants revealed common and distinctive impacted global transcription reprogramming and transcriptional regulatory hubs in response to stresses, and these five amino acid changes had different effects on the interactions of Spt15 with DNA and other proteins in the RNA Polymerase II transcription machinery according to protein structure alignment analysis.

CONCLUSIONS

Taken together, our results demonstrated that the Target-AID base editor provided a powerful tool for targeted in situ mutagenesis in S. cerevisiae and more potential targets of Spt15 residues for enhancing yeast stress tolerance.

Highly Efficient CRISPR-Mediated Base Editing in Sinorhizobium meliloti

Rhizobia are widespread gram-negative soil bacteria and indispensable symbiotic partners of leguminous plants that facilitate the most highly efficient biological nitrogen fixation in nature. Although genetic studies in Sinorhizobium meliloti have advanced our understanding of symbiotic nitrogen fixation (SNF), the current methods used for genetic manipulations in Sinorhizobium meliloti are time-consuming and labor-intensive. In this study, we report the development of a few precise gene modification tools that utilize the CRISPR/Cas9 system and various deaminases. By fusing the Cas9 nickase to an adenine deaminase, we developed an adenine base editor (ABE) system that facilitated adenine-to-guanine transitions at one-nucleotide resolution without forming double-strand breaks (DSB). We also engineered a cytidine base editor (CBE) and a guanine base editor (GBE) that catalyze cytidine-to-thymine substitutions and cytidine-to-guanine transversions, respectively, by replacing adenine deaminase with cytidine deaminase and other auxiliary enzymes. All of these base editors are amenable to the assembly of multiple synthetic guide RNA (sgRNA) cassettes using Golden Gate Assembly to simultaneously achieve multigene mutations or disruptions. These CRISPR-mediated base editing tools will accelerate the functional genomics study and genome manipulation of rhizobia.

Cytosine Base Editor-Mediated Multiplex Genome Editing to Accelerate Discovery of Novel Antibiotics in Bacillus subtilis and Paenibacillus polymyxa

Genome-based identification of new antibiotics is emerging as an alternative to traditional methods. However, uncovering hidden antibiotics under the background of known antibiotics remains a challenge. To over this problem using a quick and effective genetic approach, we developed a multiplex genome editing system using a cytosine base editor (CBE). The CBE system achieved simultaneous double, triple, quadruple, and quintuple gene editing with efficiencies of 100, 100, 83, and 75%, respectively, as well as the 100% editing efficiency of single targets in Bacillus subtilis. Whole-genome sequencing of the edited strains showed that they had an average of 8.5 off-target single-nucleotide variants at gRNA-independent positions. The CBE system was used to simultaneously knockout five known antibiotic biosynthetic gene clusters to leave only an uncharacterized polyketide biosynthetic gene cluster in Paenibacillus polymyxa E681. The polyketide showed antimicrobial activities against gram-positive bacteria, but not gram-negative bacteria and fungi. Therefore, our findings suggested that the CBE system might serve as a powerful tool for multiplex genome editing and greatly accelerating the unraveling of hidden antibiotics in Bacillus and Paenibacillus species.

DNA-cleavage activity of the iron(II) complex with optically active ligands, meta- and para-xylyl-linked N',N'-dipyridylmethyl-cyclohexane-1,2-diamine

DNA-cleavage agents such as bleomycin have potential anticancer applications. The development of a DNA-cleavage reagent that recognizes specific sequences allows the development of cancer therapy with reduced side effects. In this study, to develop novel compounds with specific DNA-cleavage activities, we synthesized optically active binuclear ligands, (1R,1'R,2R,2'R)-N¹,N^1'-(meta/para-phenylenebis(methylene))bis(N²,N²-bis(pyridin-2-ylmethyl)cyclohexane-1,2-diamine) and their enantiomers. The DNA-cleavage activities of these compounds were investigated in the presence of Fe(II)SO₄ and sodium ascorbate. The obtained results indicated that the Fe(II) complexes of those compounds efficiently cleave DNA and that their cleavage was subtle sequence-selective. Therefore, we succeeded in developing compounds that can be used as small-molecule drugs for cancer chemotherapy.

In-situ generation of large numbers of genetic combinations for metabolic reprogramming via CRISPR-guided base editing

Reprogramming complex cellular metabolism requires simultaneous regulation of multigene expression. Ex-situ cloning-based methods are commonly used, but the target gene number and combinatorial library size are severely limited by cloning and transformation efficiencies. In-situ methods such as multiplex automated genome engineering (MAGE) depends on high-efficiency transformation and incorporation of heterologous DNA donors, which are limited to few microorganisms. Here, we describe a Base Editor-Targeted and Template-free Expression Regulation (BETTER) method for simultaneously diversifying multigene expression. BETTER repurposes CRISPR-guided base editors and in-situ generates large numbers of genetic combinations of diverse ribosome binding sites, 5’ untranslated regions, or promoters, without library construction, transformation, and incorporation of DNA donors. We apply BETTER to simultaneously regulate expression of up to ten genes in industrial and model microorganisms Corynebacterium glutamicum and Bacillus subtilis. Variants with improved xylose catabolism, glycerol catabolism, or lycopene biosynthesis are respectively obtained. This technology will be useful for large-scale fine-tuning of multigene expression in both genetically tractable and intractable microorganisms.

To obtain optimal yield and productivity in bioproduction, expression of pathway genes must be appropriately coordinated. Here, the authors report repurposing of base editors for simultaneous regulation of multiple gene expression and demonstrate its application in industrially important and model microorganisms.