A micro(nano)plastic boomerang tale: A never ending story?

Role of UV radiation and oxidation on polyethylene micro- and nanoplastics: impacts on cadmium sorption, bioaccumulation, and toxicity in fish intestinal cells

This study investigated the role of ultraviolet (UV) radiation and oxidation in high-density polyethylene microplastics (2-15 μm) and nanoplastics (0.2-9.9 μm) (NMPs) on particle chemistry, morphology, and reactivity with cadmium (Cd). Additionally, toxicity of NMPs alone and with Cd was evaluated using RTgutGC cells, a model of the rainbow trout (Oncorhynchus mykiss) intestine. The role on NMPs on Cd bioaccumulation in RTgutGC cells was also evaluated. Dynamic light scattering indicated that after UV radiation NPs agglomerated size increased from 0.8 to 28 µm, and to 8 µm when Cd was added. Oxidized MPs agglomerated size increased from 11 and 7 to 46 and 27 µm in non-UV- and UV-aged oxidized MPs when adding Cd, respectively. Cd-coated particles exhibited generally significantly higher zeta potential than non-Cd-coated particles, while attenuated total reflectance-Fourier transform infrared spectroscopy showed that the functional chemistry of the particles was oxidized and modified after being exposed to UV radiation. Presence of NMPs resulted in a significant decrease in Cd bioaccumulation in RTgutGC cells (100.5-87.9 ng Cd/mg protein) compared to Cd alone (138.1 ng Cd/mg protein), although this was not quite significant for co-exposures with UV-aged NPs (105.7 ng Cd/mg protein). No toxicity was observed in RTgutGC cells exposed to NMPs alone for 24 h. Moreover, co-exposures with Cd indicated that NMPs reduce the toxicity of Cd. Altogether these results show that UV aging enhances NMP surface reactivity, increasing Cd absorption in solution, which resulted in a reduction in Cd bioavailability and toxicity.

Microplastics and nanoplastics: Source, behavior, remediation, and multi-level environmental impact

Plastics introduced into the natural environment persist, degrade, and fragment into smaller particles due to various environmental factors. Microplastics (MPs) (ranging from 1 μm to 5 mm) and nanoplastics (NPs) (less than 1 μm) have emerged as pollutants posing a significant threat to all life forms on Earth. Easily ingested by living organisms, they lead to ongoing bioaccumulation and biomagnification. This review summarizes existing studies on the sources of MPs and NPs in various environments, highlighting their widespread presence in air, water, and soil. It primarily focuses on the sources, fate, degradation, fragmentation, transport, and ecotoxicity of MPs and NPs. The aim is to elucidate their harmful effects on marine organisms, soil biota, plants, mammals, and humans, thereby enhancing the understanding of the complex impacts of plastic particles on the environment. Additionally, this review highlights remediation technologies and global legislative and institutional measures for managing waste associated with MPs and NPs. It also shows that effectively combating plastic pollution requires the synergization of diverse management, monitoring strategies, and regulatory measures into a comprehensive policy framework.

Pyrolysis temperature matters: Biochar-derived dissolved organic matter modulates aging behavior and biotoxicity of microplastics

Microplastics (MPs) have emerged as a novel and highly concerning contaminant that is ubiquitous in the aqueous environment. However, the aging of MPs induced by dissolved organic matter (DOM), especially biochar-derived dissolved organic matter (BDOM), and the biological toxicity after aging are not fully understood. In this study, the effects of biochar-derived BDOMs on the photoaging and biotoxicity of MPs were investigated at different pyrolysis temperatures using micro-scale polyethylene (PE) as an example. The results showed that the amount of ·OH generated by the BDOM/PE systems was related to the molecular composition and structure of BDOMs. High temperature BDOM7/9 with less lignin-like (34.33 % / 41.80 %) and more lipid (24.58 % / 19.88 %) content could produce more ·OH by itself, and its binding ability with PE was weaker due to its less hydrophobic components (SUVA260 = 0.10 / 0.11), which resulted in a weaker shading effect and less inhibition of the system, thus resulting in more ·OH production in the high temperature BDOM7/9/PE system. However, the involvement of BDOM, although favoring the long-term stable ·OH production of the system, did not significantly promote the photoaging of MPs. Furthermore, combined in vivo and in vitro biotoxicity studies of MPs showed that photoaging PE with the involvement of BDOM greatly improved systemic inflammation and tissue damage, as well as reactive oxygen species (ROS, such as ·OH and -OH)-induced cell death. For example, the addition of BDOM5/PE-light reduced the cell death of human lung, liver, and kidney cells from 54.70 %, 69.39 %, and 48.35 % to 22.78 %, 33.13 %, and 25.83 %, respectively, compared to the PE-light group. The results of this study contribute to an in-depth understanding of the environmental behavior of BDOM and MPs systems.

Mechanistic Insights into Cellular and Molecular Basis of Protein-Nanoplastic Interactions

Plastic waste is ubiquitously present across the world, and its nano/sub-micron analogues (plastic nanoparticles, PNPs), raise severe environmental concerns affecting organisms' health. Considering the direct and indirect toxic implications of PNPs, their biological impacts are actively being studied; lately, with special emphasis on cellular and molecular mechanistic intricacies. Combinatorial OMICS studies identified proteins as major regulators of PNP mediated cellular toxicity via activation of oxidative enzymes and generation of ROS. Alteration of protein function by PNPs results in DNA damage, organellar dysfunction, and autophagy, thus resulting in inflammation/cell death. The molecular mechanistic basis of these cellular toxic endeavors is fine-tuned at the level of structural alterations in proteins of physiological relevance. Detailed biophysical studies on such protein-PNP interactions evidenced prominent modifications in their structural architecture and conformational energy landscape. Another essential aspect of the protein-PNP interactions includes bioenzymatic plastic degradation perspective, as the interactive units of plastics are essentially nano-sized. Combining all these attributes of protein-PNP interactions, the current review comprehensively documented the contemporary understanding of the concerned interactions in the light of cellular, molecular, kinetic/thermodynamic details. Additionally, the applicatory, economical facet of these interactions, PNP biogeochemical cycle and enzymatic advances pertaining to plastic degradation has also been discussed.

Knowledge, concerns and attitudes towards plastic pollution: An empirical study of public perceptions in Portugal

While the harmful effects of different types of plastic particles have been increasingly reported, studies on public perceptions and behaviors related to plastic pollution may be considered limited. The present study aims to assess the general public's knowledge, awareness, and concern about plastic pollution in different environmental compartments (air, water, and soil) and assess recycling behaviors. For this, a large representative sample was considered (over 1000 participants), composed of members of different genders, levels of education, and age groups. Overall, the results showed that participants were aware of plastic pollution in many environmental compartments, although they reported being more concerned about the marine and land environments than the air. Participants' levels of concern about the plastic problem were influenced by age and level of education, with older participants and those with lower educational levels attributing less importance to recycling as a means of tackling the plastic problem. Women are more likely to adopt plastic alternatives and engage in recycling practices than men. Data allowed the identification of priority sociodemographic characteristics of communities that should be targeted in education and awareness-raising activities.

Microplastics in mangroves with special reference to Asia: Occurrence, distribution, bioaccumulation and remediation options

Microplastics (MPs) are a new and lesser-known pollutant that has intrigued the interest of scientists all over the world in recent decades. MP (<5mm in size) can enter marine environments such as mangrove forests in a variety of ways, interfering with the health of the environment and organisms. Mangroves are now getting increasingly exposed to microplastic contamination due to their proximity to human activities and their position as critical transitional zones between land and sea. The present study reviews the status of MPs contamination specifically in mangrove ecosystems situated in Asia. Different sources and characteristics of MPs, subsequent deposition of MPs in mangrove water and sediments, bioaccumulation in different organisms are discussed in this context. MP concentrations in sediments and organisms were higher in mangrove forests exposed to fishing, coastal tourism, urban, and industrial wastewater than in pristine areas. The distribution of MPs varies from organism to organism in mangrove ecosystems, and is significantly influenced by their morphometric characteristics, feeding habits, dwelling environment etc. Mangrove plants can accumulate microplastics in their roots, stem and leaves through absorption, adsorption and entrapment helping in reducing abundance of microplastic in the surrounding environment. Several bacterial and fungal species are reported from these mangrove ecosystems, which are capable of degrading MPs. The bioremediation potential of mangrove plants offers an innovative and sustainable approach to mitigate microplastic pollution. Diverse mechanisms of MP biodegradation by mangrove dwelling organisms are discussed in this context. Biotechnological applications can be utilized to explore the genetic potential of the floral and faunal species found in the Asian mangroves. Detailed studies are required to monitor, control, and evaluate MP pollution in sediments and various organisms in mangrove ecosystems in Asia as well as in other parts of the world.

Effects of polymethylmethacrylate nanoplastics on the polychaete Hediste diversicolor: Behavioural, regenerative, and biochemical responses

Plastics, particularly microplastics (MPs) and nanoplastics (NPs), have been regarded as pollutants of emerging concern due to their effects on organisms and ecosystems, especially considering marine environments. However, in terms of NPs, there is still a knowledge gap regarding the effects of size and polymer on marine invertebrates, such as benthic organisms. Therefore, this study aimed to understand, regarding behavioural, physiological, and biochemical endpoints (neurotransmission, energy metabolism, antioxidant status, and oxidative damage), the effects of 50 nm waterborne polymethylmethacrylate (PMMA) NPs (0.5 to 500 µg/L) on the marine benthic polychaete Hediste diversicolor, a key species in estuarine and coastal ecosystems. Results demonstrated that worms exposed to PMMA NPs had a shorter burrowing time than control organisms. Nevertheless, worms exposed to PMMA NPs (0.5 and 500 µg/L) decreased cholinesterase activity. Energy metabolism was decreased at 50 and 500 µg/L, and glycogen content decreased at all concentrations of PMMA NPs. Enzymes related to the antioxidant defence system (superoxide dismutase and glutathione peroxidase) displayed increased activities in H. diversicolor specimens exposed to concentrations between 0.5 and 500 µg/L, which led to no damage at the cell membrane and protein levels. In this study, polychaetes also displayed a lower regenerative capacity when exposed to PMMA NPs. Overall, the data obtained in this study emphasize the potential consequences of PMMA NPs to benthic worms, particularly between 0.5 and 50 µg/L, with polychaetes exposed to 50 µg/L being the most impacted by the analysed NPs. However, since sediments are considered to be sinks and sources of plastics, further studies are needed to better understand the impacts of different sizes and polymers on marine organisms, particularly benthic species.

Toxicity assessment of microplastics within the Loire River in the clam Corbicula fluminea exposed to environmentally relevant exposure conditions

The dispersed pollution caused by microplastics (MPs) represents a current and global concern. While the fragmentation of plastic debris into smaller particles occurs in rivers, little MP research is done on freshwater species and is published compared to the marine environment. The Loire River is the longest river in France and is subject to moderate to high anthropic pressure while it represents major societal and economic issues. However, there are not many studies that have been put forward with regards to the effect of environmental MPs (EMPs) on aquatic organisms and no policies have been enacted to monitor the plastic pollution. In this study, freshwater bivalves, Corbicula fluminea, were exposed for 21 days to environmentally relevant concentrations of a mixture of <200 µm MPs generated from plastic litter collected directly along the banks of the Loire River. This mixture was composed of 40% polyethylene (PE), 40% polypropylene (PP), 10% polyethylene terephthalate (PET) and 10% polyvinylchloride (PVC) (mass percentage). Ecotoxicological effects were assessed from the individual to the molecular levels on several endpoints: condition index, filtration efficiency, enzyme activities, lipid peroxidation, energy reserves and gene expression. The ingestion of EMPs caused damages at the biochemical level. Indeed, we reported an increase in catalase activity in gills and digestive mass, a decrease in TBARs in gills, a decrease in acetylcholinesterase activity in the digestive mass, a decrease of glycogen and lipid contents in the whole organisms and a significant induction of the expression of gst, cat, mp, acp genes. The current results suggest therefore that long-term exposure to realistic doses of EMPs causes toxicity towards freshwater benthic biota. The analysis of biomarker activities and the analysis of gene expression are complementary to prevent the effects of a plastic contamination at higher biological levels in aquatic organisms.

Evaluation of the pulmonary toxicity of PSNPs using a Transwell-based normal human bronchial epithelial cell culture system

To reduce the nanoplastics (NPs) toxicity assessment error, we established a Transwell-based bronchial epithelial cell exposure system to assess the pulmonary toxicity of polystyrene NPs (PSNPs). Transwell exposure system was more sensitive than submerged culture for toxicity detection of PSNPs. PSNPs adhered to the BEAS-2B cell surface, were ingested by the cell, and accumulated in the cytoplasm. PSNPs induced oxidative stress and inhibited cell growth through apoptosis and autophagy. A noncytotoxic dose of PSNPs (1 ng/cm2) increased the expression levels of inflammatory factors (ROCK-1, NF-κB, NLRP3, ICAM-1, etc) in BEAS-2B cells, whereas a cytotoxic dose (1000 ng/cm2) induced apoptosis and autophagy, which might inhibit the activation of ROCK-1 and contribute to reducing inflammation. In addition, the noncytotoxic dose increased the expression levels of zonula occludens-2 (ZO-2) and α1-antitrypsin (α-AT) proteins in BEAS-2B cells. Therefore, in response to PSNP exposure, a compensatory increase in the activities of inflammatory factors, ZO-2, and α-AT may be triggered at low doses as a mechanism to preserve the survival of BEAS-2B cells. In contrast, exposure to a high dose of PSNPs elicits a noncompensatory response in BEAS-2B cells. Overall, these findings suggest that PSNPs may be harmful to human pulmonary health even at an ultralow concentration.

Assessment of microplastic contamination in the Loire River (France) throughout analysis of different biotic and abiotic freshwater matrices

The contamination of microplastics (MP) in freshwater environments represent a major way for the MP transport in the environment. The assessment of MP pollution in freshwater compartments is then important to visualize the pressure and the impacts on medium, and to set up necessary measures. In this context, this study focused on the influence of anthropogenic activities of a medium French city (Angers) on MP levels in samples collected from the Loire River, the longest river in France. Abiotic and biotic matrices were collected upstream and downstream Angers. A first analysis was performed based on microscopy to determine the size, colour and shape of suspected MP and a complementary analysis by μ-FTIR (micro-Fourier Transform InfraRed) was conducted to determine the composition of plastic particles. Three organisms belonging to different trophic levels were studied: when the MP level was expressed per individual, the lowest abundance of MP was found in Tubifex sp. Followed by Corbicula fluminea, while the highest was measured in Anguilla anguilla. To establish the relationship with their habitat, the presence of MP in sediment and water was also analysed. Therefore, this works constitutes a complete overview of the MP levels in freshwater abiotic and biotic matrices. Overall, the presence of MP in analysed samples did not follow a particular pattern, neither in the sites nor matrices: the characteristics depending on a multifactorial outcome (feeding mode, organism size …). However, correlation of MP pattern between clams and sediment was quite evident, while the one between worms and their habitat was not. This demonstrates the relevance of investigating plastic contamination both in biotic and abiotic matrices. Finally, a standardisation of sampling and analytical analysis protocols would be helpful to make comparisons between studies more robust.

A critical review on nanoplastics and its future perspectives in the marine environment

Nanoplastics (plastic particles smaller than 1 μm) are the least-known type of marine litter. Nanoplastics (NPs) have attracted much interest in recent years because of their prevalence in the environment and the potential harm they can cause to living organisms. This article focuses on understanding NPs and their fate in the marine environment. Sources of NPs have been identified, including accidental release from products or through nano-fragmentation of larger plastic debris. As NPs have a high surface area, they may retain harmful compounds. The presence of harmful additives in NPs poses unique practical challenges for studies on their toxicity. In this review, several methods specifically adapted for the physical and chemical characterization of NPs have been discussed. Furthermore, the review provides an overview of the translocation and absorption of NPs into organisms, along with an evaluation of the release of potential toxins from NPs. Further, we have provided an overview about the existing methods suggested for the possible degradation of these NPs. We conclude that the hazards of NPs are plausible but unknown, necessitating a thorough examination of NPs' sources, fate, and effects to better mitigate and spread awareness about this emerging contaminant.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.

The effects of size and surface functionalization of polystyrene nanoplastics on stratum corneum model membranes: An experimental and computational study

Nanoplastics are mainly generated from the decomposition of plastic waste and artificial production and have attracted much attention due to their wide distribution in the environment and the potential risk for humans. As the largest organ of the human body, the skin is inevitably in contact with nanoplastics. Stratum corneum is the first barrier when the skin is exposed to nanoplastics. However, little is known about the interactions between nanoplastics and stratum corneum. Here, the effects of particle size and surface functionalization (amino-modified and carboxy-modified) of polystyrene nanoplastics on the stratum corneum models were studied by Langmuir monolayer and molecular dynamics simulations. An equimolar mixture of ceramide/cholesterol/free fatty acid was used to mimic stratum corneum intercellular lipids. The Langmuir monolayer studies demonstrated that the larger size and surface functionalization of polystyrene nanoplastics significantly reduced the stability of stratum corneum lipid monolayer in a concentration-dependent fashion. Simulation results elucidated that functionalized polystyrene oligomers had a stronger interaction with lipid components of the stratum corneum model membrane. The cell experiments also indicated that functionalized polystyrene nanoplastics, especially for amino-modified polystyrene nanoplastics, had significant cytotoxicity on normal human dermal fibroblast cells. Our results provide fundamental information and the basis for a deeper understanding of the health risks of nanoplastics to humans.

A comprehensive evaluation of microplastic pollution in the Xiangshan Bay of China with special reference to seasonal variation

Marine microplastic (MP) pollution has drawn global attention due to its potential risk to ecosystem. In the present study, we investigated MP pollution in surface water and sediment of a semi-closed bay: the Xiangshan Bay in the East China Sea in spring and summer. The results showed that MP abundance in surface water increased significantly in summer than spring (0.233 and 0.036 item/m³, respectively), while MP abundance in sediment was relatively steady. Meanwhile, the smaller size MPs (diameter < 1000 μm) and land-input fragment-shaped and film-shaped PP and PE increased in surface water in summer compared to spring. Surface microstructure of MPs showed that there were more cracks on MPs in summer comparing to spring. Based on diversity index, MP pollution in the Xiangshan Bay was at a low level and the composition was relatively uncomplicated. The source tracing analysis indicated main contributor of MPs were different in two seasons: textile industry was the dominate source of MPs in spring while fishery production were the dominate source in summer. Our results indicate that the pollution source of MPs could be various in different seasons due to the different climate and human activities, and provide a reference in the prevention and control of MP pollution in semi-closed bay ecosystems.

The effects of adsorbed benzo(a)pyrene on dynamic behavior of polystyrene nanoplastics through phospholipid membrane: A molecular simulation study

Nanoplastics (NPs) are mainly generated from the decomposition of plastic waste and industrial production, which have attracted much attention due to the potential risk for humans. The ability of NPs to penetrate different biological barriers has been proved, but the understanding of molecular details is very limited, especially for organic pollutant-NP combinations. Here, we investigated the uptake process of polystyrene NPs (PSNPs) combined with benzo(a)pyrene (BAP) molecules by dipalmitoylphosphatidylcholine (DPPC) bilayers by molecular dynamics (MD) simulations. The results showed that the PSNPs can adsorb and accumulate BAP molecules in water phase and then carried BAP molecules to enter DPPC bilayers. At the same time, the adsorbed BAP promoted the penetration of PSNPs into DPPC bilayers effectively by hydrophobic effect. The process of BAP-PSNP combinations penetrating into DPPC bilayers can be summarized into four steps including adhesion on the DPPC bilayer surface, uptake by the DPPC bilayer, BAP molecules detached from the PSNPs, and the PSNPs depolymerized in the bilayer interior. Furthermore, the amount of adsorbed BAP on PSNPs affected the properties of DPPC bilayers directly, especially the fluidity of DPPC bilayers that determine the physiologic function. Obviously, the combined effect of PSNPs and BAP enhanced the cytotoxicity. This work not only presented a vivid transmembrane process of BAP-PSNP combinations and revealed the nature of the effects of adsorbed benzo(a)pyrene on the dynamic behavior of polystyrene nanoplastics through phospholipid membrane, but also provide some necessary information of the potential damage for organic pollutant-nanoplastic combinations on human health at a molecular level.

The risks of marine micro/nano-plastics on seafood safety and human health

A considerable mass of plastics has been released into the marine environment annually through different human activities, including industrial, agriculture, medical, pharmaceutical and daily care products. These materials are decomposed into smaller particles such as microplastic (MP) and nanoplastic (NP). Hence, these particles can be transported and distributed in coastal and aquatic areas and are ingested by the majority of marine biotas, including seafood products, thus causing the contamination of the different parts of aquatic ecosystems. In fact, seafood involves a wide diversity of edible marine organisms, such as fish, crustaceans, molluscs, and echinoderms, which can ingest the micro/nanoplastics particles, and then transmit them to humans through dietary consumption. Consequently, these pollutants can cause several toxic and adverse impacts on human health and the marine ecosystem. Therefore, this chapter provides information on the potential risks of marine micro/nanoplastics on seafood safety and human health.

Mangroves in the "Plasticene": High exposure of coastal mangroves to anthropogenic litter pollution along the Central-West coast of India

Anthropogenic litter is a ubiquitous stressor in the global ocean, and poses ominous threats to oceanic biodiversity and ecosystem functioning. At the terrestrial-ocean interface, tropical mangrove forests are subject to substantial exposure to mismanaged litter from inland and marine sources. While the effects of litter in different marine ecosystems are well-documented, research on the ecological consequences of litter pollution on mangroves remain nascent stage. Here, we investigated anthropogenic litter concentration, composition, probable sources, and impact on coastal mangroves along the Central West coast of India. The mean concentration of trapped litter was measured 8.5 ± 1.9 items/m² (ranged 1.4 ̶ 26.9 items/m²), and 10.6 ± 0.5 items/tree (ranged 0 ̶ 85 items/tree) on the mangrove floor and mangrove canopy, respectively. Plastic dominated 83.02 % of all litter deposited on the mangrove forest floor and 93.4 % of all entangled litter on mangrove canopy. Most litter comprised single-use plastic products across all surveyed locations. Mangrove floor cleanliness was assessed using several indices, such as Clean Coast Index, General Index, Hazardous Items Index, and Pollution Load Index, reiterating an inferior cleanliness status. The pollution load index indicates "Hazard level I" plastic pollution risk across the mangroves. Litter concentration differed markedly across all sites. However, a significantly higher concentration of stranded litter was detected in the densely populated urban agglomeration and rural areas with inadequate solid waste management. Probable sources of litter indicate land-based (local) and sea-originated (fishing). Supportive information on the transport and accumulation of marine litter is examined based on the National Centers for Environmental Prediction (NCEP) Climate Forecast System (CFS) model version 2 reanalysis of surface wind and current pattern across the Arabian Sea followed by MIKE simulated tide-induced coastal current. Mangrove pneumatophores and branches were found to be damaged by entangled plastics. Hence, determining litter quantum and their probable input source is pivotal in mitigating anthropogenic litter impact on mangrove ecosystems and fostering mangrove conservation. Overall, results envisage that stringent enforcement, implementation of an integrated solid waste management framework, and general behavioral change of the public are crucial to mitigate litter/plastic pollution.

Microplastics' analysis in water: Easy handling of samples by a new Thermal Extraction Desorption-Gas Chromatography-Mass Spectrometry (TED-GC/MS) methodology

Thermal Extraction-Desorption (TED) using a thermobalance coupled to a gas chromatograph (GC) with mass spectrometer (MS) detector is an extended method for polymers identification in complex matrixes. A new TED-GC/MS method for microplastics identification is developed in this study, where the whole filter with solids collected from water is thermal treated in a furnace, instead of using a small portion in a Thermogravimetric analysis (TGA) device, avoiding sample handling. Pyrolyzing the whole filter in a tubular furnace has advantages with respect to the standard procedure of using a TGA with a small crucible in TED-GC/MS. The main advantage is the easy manipulation of the sample, since the filter does not have to be manipulated to extract the sample or cut some portions, avoiding sample losses during handling and ensuring that inhomogeneity on the filter surface is not a problem. Furthermore, there are no limitations on the weight of the sample beyond the adsorbent's ability to trap decomposition compounds without becoming saturated, so high intensity signals can be obtained in order to avoid confuse signals with noise, false negatives or values so close of the quantification limit.

Polystyrene microplastics induce autophagy and apoptosis in birds lungs via PTEN/PI3K/AKT/mTOR

Microplastics (MPs) seriously pollute and potentially threaten human health. Birds are sentinels of environmental pollutants, which respond quickly to contamination events and reveal current environmental exposure. Therefore, birds are good bioindicators for monitoring environmental pollutants. However, the mechanism of lung injury in birds and the role of the PTEN/PI3K/AKT axis are unknown. In this study, broilers treated with different polystyrene microplastics (PS-MPs) (0, 1, 10, and 100 mg/L) were exposed to drinking water for 6 weeks to analyze the effect of PS-MPs on lung injury of broilers. The results showed that with the increase of PS-MPs concentration, malonaldehyde (MDA) content increased, and catalase (CAT) and glutathione (GSH) activity decreased, further leading to oxidative stress. PS-MPs caused the PI3K/Akt/mTOR pathway to be inhibited by phosphorylation, and autophagy accelerated formation (LC3) and degradation (p62), causing autophagy. In PS-MPs exposed lung tissues, the expression of Bax/Bcl-2 and Caspase family increased, and MAPK signaling pathways (p38, ERK, and JNK) showed an increase in phosphorylation level, thus leading to cell apoptosis. Our research showed that PS-MPs could activate the antioxidant system. The antioxidant system unbalance-regulated Caspase family, and PTEN/PI3K/AKT pathways initiated apoptosis and autophagy, which in turn led to lung tissue damage in chickens. These results are of great significance to the toxicological study of PS-MPs and the protection of the ecosystem.

Recent Advances in Micro-/Nanoplastic (MNPs) Removal by Microalgae and Possible Integrated Routes of Energy Recovery

Reliance on plastic has resulted in the widespread occurrence of micro-/nanoplastics (MNPs) in aquatic ecosystems, threatening the food web and whole ecosystem functions. There is a tight interaction between MNPs and microalgae, as dominant living organisms and fundamental constituents at the base of the aquatic food web. Therefore, it is crucial to better understand the mechanisms underlying the interactions between plastic particles and microalgae, as well as the role of microalgae in removing MNPs from aquatic ecosystems. In addition, finding a suitable route for further utilization of MNP-contaminated algal biomass is of great importance. The present review article provides an interdisciplinary approach to elucidate microalgae-MNP interactions and subsequent impacts on microalgal physiology. The degradation of plastic in the environment and differences between micro- and nanoplastics are discussed. The possible toxic effects of MNPs on microalgal growth, photosynthetic activity, and morphology, due to physical or chemical interactions, are evaluated. In addition, the potential role of MNPs in microalgae cultivation and/or harvesting, together with further safe routes for biomass utilization in biofuel production, are suggested. Overall, the current article represents a state-of-the-art overview of MNP generation and the consequences of their accumulation in the environment, providing new insights into microalgae integrated routes of plastic removal and bioenergy production.

Effects of nanoplastics on zebrafish embryo-larval stages: A case study with polystyrene (PS) and polymethylmethacrylate (PMMA) particles

Plastic production has been rising consistently in the last 30 years and with it, the presence of plastic particles in the environment. A decrease in size often increases the bioavailability and reactivity of the particles. In this study the impact of polystyrene (PS; 22 nm) and polymethylmethacrylate (PMMA; 32 nm) nanoparticles on zebrafish embryo-larval stages was assessed by studying mortality, hatching, morphological features, and biochemical endpoints (associated with neurotransmission, antioxidant status and oxidative damage, and energy metabolism) after 96 h exposure, and swimming behavior after 120 h exposure. Organisms exposed to PMMA nanoparticles exhibited higher mortality and pericardial edema than those exposed to PS nanoparticles but displayed less effects on swimming behavior. Biochemical endpoints were altered to a higher degree in organisms exposed to PS nanoparticles (acetylcholinesterase, glutathione S-transferase and catalase activities) but higher peroxidative damage was found after exposure to lower concentrations of PMMA nanoparticles. Both types of nanoparticles affected energy metabolism with higher levels of glycogen found in animals exposed to PS nanoparticles. The use of integrated biomarker response index confirmed that PS nanoparticles had a higher impact on biochemical endpoints of zebrafish.

Toxicological impact of environmental microplastics and benzo[a]pyrene in the seaworm Hediste diversicolor under environmentally relevant exposure conditions

Nowadays, marine ecosystems are under severe threat from the simultaneous presence of multiple stressors, including microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) such as benzo[a]pyrene (B[a]P). In addition to their presence in various marine compartments, there are increasing concerns on the potential capacity of MPs to sorb, concentrate and transfer these pollutants in the environment. Although their ecotoxicological impacts are currently evident, few works have studied the combined effects of these contaminants. Therefore, the major purpose of this work was to assess the toxicity of environmental relevant concentrations of MPs (<30 μm) and B[a]P, alone and in mixture, in the seaworm Hediste diversicolor by exploring their accumulation and hazardous biological effects for 3 and 7 days. Environmental MPs were able to increase B[a]P in a time-dependent manner. The obtained results showed that individual treatments, as well as co-exposure to contaminants, caused cytotoxicity and genotoxicity in the cœlomic fluid cells, while oxidative stress effects were observed at tissue and gene levels associated with alteration in neurotransmission. Overall, our findings provide additional clues about MPs as organic pollutant vectors in the marine environment, and contribute to a clearer understanding of their toxicological risk to aquatic invertebrates.

The surface degradation and release of microplastics from plastic films studied by UV radiation and mechanical abrasion

During service or on discarding in the environment, solar ultraviolet radiation (UVR) and mechanical abrasion (MA) often act on plastic surface in combination, which cause the surface of plastics deterioration and micro- and nano- plastics release. Here, we examined how the set conditions (UVR, MA and UVR+MA (i.e., UVR combined with MA)) and polymer composition affected plastic degradation and microplastics (MPs) release. The surface degradation process and release of MPs of two types of plastic films (polyethylene (PE) and thermoplastic polyurethane (TPU)) under the action of UVR, MA and UVR+MA were analyzed and compared. The main results are as follow: First, the surface change of PE and TPU films by UVR+MA was observed more prominently than by UVR and MA. UVR+MA resulted in the accelerated surface degradation compared to UVR and MA. A large number of MPs were released from both PE and TPU films and significant differences were observed between UVR, MA and UVR+MA conditions. The UVR+MA treatment led to the generation of the largest amount of MPs with a smallest particle size, followed by MA and UVR. Second, plastics with different compositions exhibited different levels of resistance to UVR and MA. PE films released more MPs than TPU under the three set conditions. Finally, optical microscopy provided a direct and non-invasive method to assess the plastics degradation and the observed change in relative transmittance as a function of exposure time could be fitted linearly in some circumstances, which can be used to quantify the release of MPs. This study provided a basis for better understanding the degradation mechanisms of plastics surface and the relationship with MPs release during use and into the environment.

Feeding exposure and feeding behaviour as relevant approaches in the assessment of the effects of micro(nano)plastics to early life stages of amphibians

The sedimentation of micro and nanosized plastics is of considerable environmental relevance and the need to assess its sublethal effects to biota increasingly recognized. In their majority, as bottom, non-selective grazers, independent-feeding young life stages of amphibians, an already severely endangered worldwide group, may be particularly vulnerable to sedimented plastics. Alongside, they may be good model organisms for the assessment of the effects of micro(nano)plastics (MNPs) through ingestion. However, to our knowledge, few studies have assessed amphibians' exposure to MNPs through contaminated food or its effects in feeding behaviour assays. The available studies reveal a lack of consistent methodology: organisms, food type, media of exposure, or exposure conditions (temperature and light) in the assessment of effects. This perspective article, will address major differences found in the available studies, identifying type, size and concentrations of the polymers tested, species, and observed effects, aiming to highlight the importance of feeding exposure assays when attempting to evaluate the effect of MNPs in amphibians.

Environmental health impacts of microplastics exposure on structural organization levels in the human body

The ubiquitous prevalence of microplastics pollution has raised concerns about microplastics' potential risks and impacts on the global environment. However, the potential human health risks and impacts of microplastics remain largely unexplored. By providing an overview regarding the interaction of microplastics and human health, this review extends current knowledge on the potential impacts of microplastics pollution on humans from an environmental health perspective. The paper firstly presents the characteristics of microplastics as well as the status of global microplastics pollution. As for human health, the potential hazards of microplastics are reflected by toxic chemical components, vectors of contaminants, and physical damage. Extensive microplastic pollution on ecosystems due to human activities leads to inevitable human exposure, which may occur by dietary, inhalation and/or skin contact. Accordingly, microplastics exposure is closely associated with human health. This study explores the potential interactions of microplastics with the biological organization at various levels, including chemical, cellular, tissue, organ, and system levels. The review concludes by highlighting five urgent perspectives and implications for future research on microplastics: 1) Developing a standard terminology and research methods; 2) Reinforcing microplastics pollution governance; 3) Exploring innovative strategies and technologies; 4) Engaging the public and change behaviour; and 5) Adopting a transdisciplinary approach.

Adsorption of environmental contaminants on micro- and nano-scale plastic polymers and the influence of weathering processes on their adsorptive attributes

Increases in plastic-related pollution and their weathering can be a serious threat to environmental sustainability and human health, especially during the present COVID-19 (SARS-CoV-2 coronavirus) pandemic. Planetary risks of plastic waste disposed from diverse sources are exacerbated by the weathering-driven alterations in their physical-chemical attributes and presence of hazardous pollutants mediated through adsorption. Besides, plastic polymers act as vectors of toxic chemical contaminants and pathogenic microbes through sorption onto the 'plastisphere' (i.e., plastic-microbe/biofilm-environment interface). In this review, the effects of weathering-driven alterations on the plastisphere are addressed in relation to the fate/cycling of environmental contaminants along with the sorption/desorption dynamics of micro-/nano-scale plastic (MPs/NPs) polymers for emerging contaminants (e.g., endocrine-disrupting chemicals (EDCs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), pharmaceuticals and personal care products (PPCPs), and certain heavy metals). The weathering processes, pathways, and mechanisms governing the adsorption of specific environmental pollutants on MPs/NPs surface are thus evaluated in relation to the physicochemical alterations based on several kinetic and isotherm studies. Consequently, the detailed evaluation on the role of the complex associations between weathering and physicochemical properties of plastics should help us gain a better knowledge with respect to the transport, behavior, fate, and toxicological chemistry of plastics along with the proper tactics for their sustainable remediation.

Litter and plastic monitoring in the Indian marine environment: A review of current research, policies, waste management, and a roadmap for multidisciplinary action

Environmental contamination due to plastic waste mismanagement is a growing global concern. Plastic problem is of particular concern to the Indian Ocean nations as Asia currently contributes to the highest share of mismanaged plastic waste. Consequently, there is a worldwide interest to understand the distribution and transboundary movement of plastic from this region, which is crucial for implementing management measures. This review article focuses on current knowledge of plastic research, policies, waste management, socio-economics, challenges, and research opportunities. To date, marine plastic studies have focused on a few locations, providing an analysis of distribution and plastic-organism interactions in the Indian marine system. Along with scientific investigation, enforcement, improvisation, and, if necessary, framing new policies, integrated technologies to manage plastic waste, and behavioural changes are essential to mitigate plastic pollution. Such measures will be effective through a combination of actions among national and international researchers, industries, environmental managers, and the public.

Key knowledge gaps for One Health approach to mitigate nanoplastic risks

There are increasing concerns over the threat of nanoplastics to environmental and human health. However, multidisciplinary barriers persist between the communities assessing the risks to environmental and human health. As a result, the hazards and risks of nanoplastics remain uncertain. Here, we identify key knowledge gaps by evaluating the exposure of nanoplastics in the environment, assessing their bio-nano interactions, and examining their potential risks to humans and the environment. We suggest considering nanoplastics a complex and dynamic mixture of polymers, additives, and contaminants, with interconnected risks to environmental and human health. We call for comprehensive integration of One Health approach to produce robust multidisciplinary evidence to nanoplastics threats at the planetary level. Although there are many challenges, this holistic approach incorporates the relevance of environmental exposure and multi-sectoral responses, which provide the opportunity to identify the risk mitigation strategies of nanoplastics to build resilient health systems.

Characteristics of nano-plastics in bottled drinking water

Plastic pollution in water is threatening the environment and human health. Previous relevant studies mainly focus on macro and micro plastic pollutions and their characteristics. Little is known about the extent and characteristics of nano-scale plastics in our drinking water systems, mainly due to difficulties in their isolation and analysis. These nano-plastics may pose higher risk to human health than micro-plastics. Here we report the collection and analysis of organic nanoparticles from commercial bottled water of two brands. Novel nano-plastic particle imaging and molecular structure analysis techniques have been applied. The findings show the existence of organic nanoparticles, and a likely source has been identified to be the degradation of plastic water bottles.

Short-term exposure to polymethylmethacrylate nanoplastics alters muscle antioxidant response, development and growth in Sparus aurata

Polymethylmethacrylate (PMMA) plastic fragments have been found abundant in the environment, but the knowledge regarding its effects on the physiology of aquatic animals is still poorly studied. Here the short-term (96 h) effects of waterborne exposure to PMMA nanoplastics (PMMA-NPs) on the muscle of gilthead sea bream (Sparus aurata) fingerlings was evaluated at a concentration range that includes 0.001 up to 10 mg/L. The expression of key transcripts related to cell stress, tissue repair, immune response, antioxidant status and muscle development, together with several biochemical endpoints and metabolic parameters. Results indicate that exposure to PMMA-NPs elicit mildly antioxidant responses, enhanced the acetylcholinesterase (AChE) activity, and inhibited key regulators of muscle development (growth hormone receptors ghr-1/ghr-2 and myostatin, mstn-1 transcripts). However, no effects on pro-inflammatory cytokines (interleukin 1β, il1β and tumor necrosis factor α, tnfα) expression nor on the levels of energetic substrates (glucose, triglycerides and cholesterol) were found.

On the path to minimize plastic pollution: The perceived importance of education and knowledge dissemination strategies

Environmental awareness and education have been recognized as tools to help mitigate environmental issues. This study, performed in Portugal, aimed to describe perceived factors building environmental awareness on plastic pollution, study how perceptions are influenced by sociodemographic characteristics, and identify perceived priority targets for intervention. Results showed that participants recognize society's important role to raise awareness and to develop mitigation strategies. Higher perception was reported by women and participants with a higher level of school education. The more educated participants consider individuals possessing expert knowledge as a more reliable information source, whereas older and less schooled participants trust more in media messaging. Participants acknowledge that environmental education should be included in school plans, particularly in the first nine years of education (students with ages between 6 and 14, approximately). Data support the idea that target specific dissemination strategies should be planned according to variables like age, gender and education level.

Microplastics levels, size, morphology and composition in marine water, sediments and sand beaches. Case study of Tarragona coast (western Mediterranean)

Mediterranean Sea has been proposed as the sixth greatest accumulation zone for marine litter and the most affected regarding to microplastics (MPs). Tarragona (Catalonia, NE Spain) coastal region suffers high pressure due to urbanization, tourism, industrial harbour and petrochemical/plastic industries. The present study aims to quantify and characterize in size, morphology and composition the MPs present in sandy beaches, marine sediments, and surface seawaters of Tarragona coastal region. MPs mean abundance were 1.30 items/m³ in surface seawaters, 32.4 items/kg in marine sediments, and 10.7 items/kg in sandy beaches. Polyester fibres were dominant MPs in bottom sediments and seawater meanwhile polyethylene and polypropylene fragments were the main MPs in beaches. The fibres balls associated with bottom sediments, organic matter and plankton were abundant, masking the real quantity of fibres in each reservoir. The abundance by volume of seawater MPs was higher to those found in oceanic areas and similar to other areas of Mediterranean Sea, corroborating that Western Mediterranean Sea as a region of MPs accumulation. MPs composition and abundance suggested the input of numerous land-base-sources, WWTP (wastewater treatment plants) effluents discharges, and emissaries as the most important. Marine MPs pollution were studied from an integrative point of view, that includes superficial sea water, sand from beaches and sediments. The dynamics of MPs in Tarragona coast were characterized by seawater as the media that receive and facilitate dispersion and fragmentation. The shoreline acts as an intermediate reservoir with constant weathering and active exchange with seawater surface and the sediments acts as a significant sink for medium MPs sizes. It is necessary to develop protocols and guidelines for MPs analysis to obtain harmonized and comparable results.

An automatic flow-through system for exploration of the human bioaccessibility of endocrine disrupting compounds from microplastics

This article reports on the first attempt towards investigating the leaching rates in the human gastrointestinal (GI) tract of plastic-borne contaminants that can be ingested accidentally using physiologically relevant body fluids. Oral bioaccessibility under fasted and fed states was determined in dynamic mode exploiting an automatic flow setup. The flow system is able to mimic the fast uptake of the released species from the polymeric matrix by absorption in the human digestive system by the in-line removal of the leached species. Complex GI extractants based on the Unified Bioaccessibility Method (UBM, fasted state) and Versantvoort test (fed-state) were brought through a microplastic-loaded metal microcolumn for semi-continuous leaching of plasticizers (phthalic acid ester congeners) and monomer/antioxidant species (bisphenol A, BPA) followed by in-line solid-phase extraction and clean-up of GI extracts prior to liquid chromatography analysis. The temporal extraction profiles were fitted to a first-order kinetic model for the estimation of maximum bioaccessibility pools and apparent leaching rates. Among all studied contaminants, only BPA, dimethylphthalate and diethylphthalate were appreciably released under dynamic GI conditions from high-density polyethylene pellets (average size of 110 μm), with average bioaccessibility values spanning from 51 to 84% and 48 to 87% for UBM and Versantvoort methods, respectively. No statistically significant differences in oral bioaccessibility pools were found under fed- and fasted-state dynamic extractions. The apparent kinetic constants under the fed state were greater by ≥30% as a consequence of the effect of the larger amounts of bile salts and digestive enzymes in the Versantvoort test on the leaching rates. The estimated average daily intake, in which bioaccessibility data are contemplated, indicated that plastic materials exceeding 0.3% (w/w) BPA might pose real risks to human health.

Public views on plastic pollution: Knowledge, perceived impacts, and pro-environmental behaviours

Nowadays, plastic pollution is considered an issue of global concern. This environmental problem results from human industrial and domestic activities, associated with poor management, from manufacturing processes to products' end life. In this perspective, human consumption and management of daily used plastic materials can play a determinant role to control this environmental issue. Thus, understanding public perceptions about plastic pollution may be a valuable resource to engage society in solutions to reduce its environmental release. In this study, perceptions about plastic pollution, its impacts as well as sociodemographic and psychological factors predicting individuals' pro-environmental behaviours were analysed, in the Portuguese context. Overall, results showed that there is a general knowledge that plastics degrade in the environment. The participants of the study perceived the bio-ecological impacts of plastics as a greater threat than the socioeconomic impacts. A hierarchical regression analyses revealed that sociodemographic variables and those related to knowledge and perceived impacts about plastic pollution can predict participants' pro-environmental behaviours. Awareness about the impacts of plastic pollution (socioeconomic, health impacts and bio-ecological impacts) were highly associated to pro-environmental behaviour. This study data can help to understand how to enhance pro-environmental behaviours and contribute to decrease the presence of micro(nano)plastics in the environment.

Transfer learning strategy for plastic pollution detection in soil: Calibration transfer from high-throughput HSI system to NIR sensor

Rapid detection tasks in soil environment are generally implemented by various spectrometers and chemometric models. To reduce costs for model construction, calibration transfer from laboratory spectral instruments to portable devices has recently received extensive attention. In different application cases of model transference, most conventional methods require extra time to tune hyperparameters and to select calibration transfer techniques. Based on the near-infrared (NIR) analytical technique, this work aimed at exploring a transfer learning strategy to detect plastic pollution levels in the soil by transferring the model from a high-throughput hyperspectral image (HSI) system to an ultra-portable NIR sensor. Transfer learning was explored to diagnose the proper calibration transfer algorithm and construct the transferable model. For transferable model construction, conventional calibration transfer algorithms (Direct Standardization (DS) or Repeatability file (Repfile)) served as a pre-processing step, and non-parametric transfer learning algorithm (Easy Transfer Learning (EasyTL)) was explored in the modeling step. Supporting vector machine (SVM) was carried out as a typical modeling algorithm for comparison. For transformation algorithms selection, a distance metric algorithm, maximum mean discrepancy (MMD), was performed on spectral feature matrices before and after DS or Repfile transformation. On three transfer tasks, the results indicated that the Repfile-EasyTL model was a promising solution with higher accuracy, much lower time costs, less parameters, and dependency on the increase of standard samples than other models (SVM, DS-SVM, Repfile-SVM, EasyTL, DS-EasyTL). Moreover, MMD distance presented the great potential to serve as an indicator to vote the optimal calibration transfer algorithm before the modeling step.

Assessing small-scale freshwater microplastics pollution, land-use, source-to-sink conduits, and pollution risks: Perspectives from Japanese rivers polluted with microplastics

Rivers are vital for understanding freshwater microplastics pollution, along with the conduits from land-sources to marine-sinks. In this study, we investigated microplastics in the small-scale Awano and Ayaragi rivers, which flow into the Sea of Japan (SJ), and the Asa and Majime rivers, which flow into the Seto Inland Sea (SIS) in Yamaguchi Prefecture, Japan. Surface water samples were collected from 29 stations. Filtration, wet peroxidation, and density separation methods were employed to extract microplastics. Polymers were identified via attenuated total reflectance-Fourier transform infrared spectroscopy. Microplastics abundances and comparisons among different rivers revealed that these small-scale rivers were highly polluted than others around the world. Characterization demonstrated that small microplastics (<1000 μm) in size, fibers and fragments in shape and the polymers-polyethylene, polypropylene, vinylon, polyethylene terephthalate, and polystyrene were dominant. These small-scale rivers emitted substantially higher quantities of Japan land-sourced microplastics (0.4-154.27 billions/day and 0.01-17.55 tons/day) into the SJ and SIS environments than larger rivers in other countries compared to basin areas. The pollution load index indicated that all the river stations were polluted with microplastics. An assessment of the polymeric and pollution risks revealed variably low to high risks. The higher were the abundances of microplastics and toxic polymers, the higher were the pollution level and risks. The sites at high risk of pollution were regarded as hotspots. Both point and non-point land-uses sources of pollution could release microplastics into the river freshwater environments, affected posing high risks and hotspots. Moreover, the pollution characteristics (shapes-sizes-polymers) indicated serious ecotoxicological threats to these rivers and their downstream environments. This study provided new insights into river microplastics pollution and revealed small-scale rivers to be prominent source-to-sink microplastics conduits. Risk assessments provided a baseline for future comprehensive assessments and developing practical approaches to wards setting water quality criteria, pollution control and management.

Method for extraction of nanoscale plastic debris from soil

Sample preparation for extraction of nanoscale plastic debris (NPD, size < 1 μm) from environmental samples is a critical step to prepare NPD for further identification and quantification. Developing a NPD extraction method from soil matrices is particularly challenging due to the complexity of solid matrices. In the present study, we built upon the lessons learned from method development for extraction of microplastics and nanomaterials from environmental samples to develop a sample preparation method for extraction of NPD from soil matrices. The evaluation criteria for the extraction method are size distribution, particle number recovery, and particle mass recovery. Since there is no validated method available to trace and quantify the mass of NPD in complex matrices, we applied polystyrene particles doped with europium (Eu-PS NPs). Standard LUFA soil and field soil were spiked and mixed for 24 h with 1 mg of Eu-PS NPs and the particles were extracted from the matrices of the soils. The extraction method did not significantly influence the size distribution of the particles and the extraction agents did not degrade the Eu-PS NPs. Mass balance calculation suggested recoveries of 82 and 77% of the added Eu-PS NPs in LUFA soil and field soil, respectively. The number recoveries of the particles were 81 and 85% for LUFA soil and field soil, respectively. This method can be further optimized and used as the first building block to develop a generic sample preparation method for the extraction of NPD from soil samples. By combining this developed and verified extraction method with identification and quantification techniques, a fit-for-purpose workflow can be developed to quantify and subsequently understand the fate of NPD in soil.

Environmental fate, ecotoxicity biomarkers, and potential health effects of micro- and nano-scale plastic contamination

In recent decades, the quantity of plastic waste products has increased tremendously. As plastic wastes are released into the environment, they exert harmful effects on biota and human health. In this work, a comprehensive review is offered to describe the physical and chemical characteristics of microplastics and nanoplastics in relation to their fate, microbial ecology, transport, and ecotoxic behavior. Present discussion is expanded further to cover the biochemical, physiological, and molecular mechanisms controlling the environmental fate, ecotoxicity, and human health hazards of micro- and nanoplastics. The risks of their exposure to microbes, plants, animals, and human health are also reviewed with special emphasis. Finally, a direction for future interdisciplinary research in materials and polymer science is also discussed to help control the pollution caused by micro- and nanoplastics.

Microplastic's story

The problem of microplastic pollution is now the order of the day in front of everyone's eyes affecting the environment and the health of leaving creature. This work aims to retrace the history of microplastics in a critical way through a substantial bibliographic collection, defining the points still unresolved and those that can be resolved. Presence of marine litter in different environments is reviewed on a global scale, focusing in particular on micro and macro plastics definition, classification and characterization techniques.

Suspended fine particulate matter (PM2.5), microplastics (MPs), and polycyclic aromatic hydrocarbons (PAHs) in air: Their possible relationships and health implications

Exposure to fine particulate matter (PM_2.5) and their associated microcontaminants have been linked to increased harmful effects on the human health. In this study, the possible relationships between PM_2.5, microplastics (MPs), and polycyclic aromatic hydrocarbons (PAHs) were analyzed in an urban area of Bushehr port, in the northern part of the Persian Gulf. Presence, sources, and health risks of MPs and PAHs in both normal and dusty days were also investigated. The median of PM_2.5 and ƩPAHs were 52.8 μg/m³ and 14.1 ng/m³, respectively, indicating high pollution levels especially in dusty days. The mean level of MPs in urban suspended PM_2.5 was 5.2 items/m³. Fragments were the most abundant shape of identified MPs and polyethylene terephthalate (PET) was the most plastic types in urban dust of Bushehr port. The results revealed that PM_2.5 and MPs may possibly act as a carrier for airborne MPs and PAHs, respectively. In addition, the significant positive relationships between MPs, wind speed and wind direction, confirmed that the MPs transportation were highly controlled by atmospheric condition. Moreover, the source identification methods and trajectory analyses indicated that petrogenic sources from both proximal and distal origins play an important role in the level of PAHs. The results of chronic health risk evaluation via inhalation revealed that PM_2.5-bound PAHs had high potential cancer risk in winter, while, the estimated risks for non-carcinogenic PAHs were not considerable. In the case of MPs, the assessment of human intake of MPs via inhalation highlighted the possible risks for habitants.

3D printer waste, a new source of nanoplastic pollutants

Plastics pollution has been recognized as a serious environmental problem. Nevertheless, new plastic uses, and applications are still increasing. Among these new applications, three-dimensional resin printers have increased their use and popularity around the world showing a vertiginous annual-sales growth. However, this technology is also the origin of residues generation from the alcohol cleaning procedure at the end of each printing. This alcohol/resin mixture can originate unintentionally very small plastic particles that usually are not correctly disposed, and as consequence, could be easily released to the environment. In this work, the nanoparticle generation from 3D printer's cleaning procedure and their physicochemical characterization is reported. Nano-sized plastic particles are easily formed when the resin residues are dissolved in alcohol and placed under UV radiation from sunlight. These nanoparticles can agglomerate in seawater showing an average hydrodynamic diameter around 1 μm, whereas the same nanoparticles remain dispersed in ultrapure water, showing a hydrodynamic diameter of ≈300 nm. The formed nanoparticles showed an isoelectric point close to pH 2, which can facilitate their interaction with other positively charged pollutants. Thus, these unexpected plastic nanoparticles can become an environmental issue and public health risk.

Perspectives on Micro(Nano)Plastics in the Marine Environment: Biological and Societal Considerations

Marine litter is a global problem which has been negatively affecting the environment. Plastic materials are the most commonly found marine debris, with potential biological (not only for aquatic organisms but also for humans) as well as socio-economic impacts. Considering that it is an anthropogenic problem, society could play an important role to minimize it. Although a considerable amount of research has addressed the biological effects of plastics (micro(nano)plastics) on biota, few studies have addressed how scientific information is being transmitted to the public and the potential role of citizen environmental education. The current paper discusses known effects, researched topics and how scientific knowledge is currently being transmitted to the public.

Ingestion and effects of polystyrene nanoparticles in the silkworm Bombyx mori

Information on the occurrence and effects of nanoplastics in ecosystems worldwide currently represent one of the main challenges from the ecotoxicological point of view. This is particularly true for terrestrial environments, in which nanoplastics are released directly by human activities or derive from the fragmentation of larger plastic items incorrectly disposed. Since insects can represent a target for these emerging contaminants in land-based community, the aim of this study was the evaluation of ingestion of 0.5 μm polystyrene nanoplastics and their effects in silkworm (Bombyx mori) larvae, a useful and well-studied insect model. The ingestion of nanoplastics, the possible infiltration in the tissues and organ accumulation were checked by confocal microscopy, while we evaluated the effects due to the administered nanoplastics through a multi-tier approach based on insect development and behaviour assessment, as endpoints at organism level, and the measurements of some biochemical responses associated with the imbalance of the redox status (superoxide dismutase, catalase, glutathione s-transferase, reactive oxygen species evaluation, lipid peroxidation) to investigate the cellular and molecular effects. We observed the presence of microplastics in the intestinal lumen, but also inside the larvae, specifically into the midgut epithelium, the Malpighian tubules and in the haemocytes. The behavioural observations revealed a significant (p < 0.05) increase of erratic movements and chemotaxis defects, potentially reflecting negative indirect effects on B. mori survival and fitness, while neither effect on insect development nor redox status imbalance were measured, with the exception of the significant (p < 0.05) inhibition of superoxide dismutase activity.

Standardized protocols for microplastics determinations in environmental samples from the Gulf and marginal seas

Microplastics are a group of ubiquitous persistent pollutants that have rapidly attracted much attention from the scientific community as well as the general public due to the growing awareness of the environmental risks they pose. However, due to limitations and variations in sampling, analytical measurement methods, and the different units used for reporting data, reliable comparisons between studies in the Gulf region and internationally are not straightforward. This study proposes standardized protocols for marine sediment, seawater, marine biota and aerosol (1) sampling, (2) sample processing, (3) sample identification and (4) reporting units to be used. An attempt has been made to highlight the limitations of the widely employed strategies for sampling microplastics in seawater, where a large portion of the microplastics is not sampled due to the mesh sizes used. The issues with the processing of biota samples and aerosols are likewise addressed, and recommendations are also made for standardization of units for reporting microplastic quantification. Protocols for collection of bottom sediments and aerosols are also proposed. These are the environmental matrixes for which there are no harmonized protocols in the Gulf region; hence if a standardized approach is adopted, it will enable and improve comparisons between the studies within this region and can be useful for similar studies in other marine areas as well.

Nano-plastics and their analytical characterisation and fate in the marine environment: From source to sea

Polymer contamination is a major pollutant in all waterways and a significant concern of the 21st Century, gaining extensive research, media, and public attention. The polymer pollution problem is so vast; plastics are now observed in some of the Earth's most remote regions such as the Mariana trench. These polymers enter the waterways, migrate, breakdown; albeit slowly, and then interact with the environment and the surrounding biodiversity. It is these biodiversity and ecosystem interactions that are causing the most nervousness, where health researchers have demonstrated that plastics have entered the human food chain, also showing that plastics are damaging organisms, animals, and plants. Many researchers have focused on reviewing the macro and micro-forms of these polymer contaminants, demonstrating a lack of scientific data and also a lack of investigation regarding nano-sized polymers. It is these nano-polymers that have the greatest potential to cause the most harm to our oceans, waterways, and wildlife. This review has been especially ruthless in discussing nano-sized polymers, their ability to interact with organisms, and the potential for these nano-polymers to cause environmental damage in the marine environment. This review details the breakdown of macro-, micro-, and nano-polymer contamination, examining the sources, the interactions, and the fates of all of these polymer sizes in the environment. The main focus of this review is to perform a comprehensive examination of the literature of the interaction of nanoplastics with organisms, soils, and waters; followed by the discussion of toxicological issues. A significant focus of the review is also on current analytical characterisation techniques for nanoplastics, which will enable researchers to develop protocols for nanopolymer analysis and enhance understanding of nanoplastics in the marine environment.

Microplastics in Honey, Beer, Milk and Refreshments in Ecuador as Emerging Contaminants

According to the latest research, marine products have the greatest potential for microplastic (MPs) contamination. Therefore, their presence in terrestrial food has not managed to attract much attention—despite the fact that in the future they may represent a serious environmental risk. Research conducted in Europe and the US has indicated the presence of MPs in tap water, bottled water, table salt, honey, beer and snails for human consumption. The presence of MPs in food has not yet been evaluated in Latin America. This work focused on evaluating two widely consumed beverages: milk and soft drinks. Furthermore, honey and beer samples were analyzed and compared to findings in the literature. All products were sourced in Ecuador. In order to determine correlations with the intensity of anthropogenic activity, samples of both industrially processed and craft products were studied. For the analysis, an improvement of previous techniques used to determine MPs in honey was applied. This technique uses microfiltration followed by degradation of organic matter with hydrogen peroxide—and finally, continuous rinsing with deionized water. Size ranges were established between 0.8–200 mm. The number of microplastics found was between 10 and 100 MPs/L, with an average of around 40 MPs/L. The sizes of the particles found in the study are in the range of 13.45 and 6742.48 μm for the fibers, and between 2.48 and 247.54 μm for the fragments. From the composition analysis carried out with FTIR, we were able to confirm the presence of 12% of microplastic. The results generally showed a greater presence of MPs compared to those registered in Europe, probably due to processing methods rather than environmental pollution. Regarding composition, the main microplastics found were polyethylene, polypropylene and polyacrylamide.