Personal care product preservatives: risk assessment and mixture toxicities with an industrial wastewater

Efficient degradation of benzalkonium chloride (BAC) by zero-valent iron activated persulfate: Kinetics, reaction mechanisms, theoretical calculations and toxicity evolution

The present study systematically investigated the elimination of benzalkonium chloride (BAC) in the zero valent iron activated persulfate (Fe0/PS) system. The influence of operational parameters, including PS concentration, Fe0 dosage and pH, were investigated through a series of kinetic experiments. When the Fe0 dosage was 5.0 mM, the initial ratio of [PS]: [BAC] was 10:1, the degradation efficiency could achieve 91.7% at pH 7.0 within 60 min. Common inorganic anions and humic acid did not significantly affect BAC degradation, implying that Fe0/PS system had a potential application prospect in the actual wastewater remediation. Based on the electron paramagnetic resonance test and quenching experiments, the BAC degradation was found to be contributed by •OH, SO4•- and Fe(IV). A total of 23 intermediates were identified by the liquid chromatography-mass spectrometry, and the degradation pathways were proposed accordingly, including dealkylation and demethylation, hydroxylation, sulfate substitution and benzyl C-N cleavage reactions. Density functional theory based calculations were conducted to realize the rationality of the proposed reaction mechanisms. The toxicity of transformation products was predicted by ECOSAR program. This work demonstrated the possibility of BAC removal in hospital and municipal wastewater by Fe0/PS treatment, and also provides a safe choice for deep treatment of quaternary ammonium salt wastewater.

Bacterial toxicity of Acetaminophen and Edaravone, and their binary mixtures: experimental and predicted values using traditional and novel Van Laar-based models

In recent years, the presence of Pharmaceutical Active Compounds (PhACs) in ecosystems has become a serious environmental problem due to their capacity to induce harmful effects at extremely low concentrations in both humans and wildlife. Water treatment plants have not been designed to remove these types of compounds efficiently. Thus, the detection of these pollutants is essential to evaluate their negative impacts and is one of the emerging issues in environmental chemistry. The main objective of this study is to determine the bacterial toxicity of two PhACs (both individually and as a mixture) through the quantification of bioluminescence inhibition in the marine bacteria Aliivibrio fischeri, a commonly used method in short-term toxicity tests. In this work, Acetaminophen and Edaravone, two drugs approved by the Food and Drug Administration, have been studied. The acute toxicity of these PhACs has been tested at two exposure times (5 and 15 min) and different concentrations, by estimation of the median effective concentration (EC50) for each individual compound or in combination at different concentrations. Moreover, the EC50 of the binary mixtures Acetaminophen/Edaravone have been forecast using two traditional predictive models, Concentration Addition and Independent Action. The results show that toxicity decreases with exposure time and depends on the concentration tested. Furthermore, a novel semi-empirical Van Laar-based model has been proposed and validated with the experimental data from this study and literature data, obtaining satisfactory estimations of the EC50 for binary mixtures.

Impact of benzalkonium chloride on anaerobic granules and its long-term effects on reactor performance

This study assessed the inhibitory and performance-degrading effects induced by the cationic surfactant benzalkonium chloride (BAC) on anaerobic granules during the long-term operation of a laboratory-scale expanded granular sludge bed (EGSB) reactor. To address the critical scientific problem of how BAC affects the efficiency of EGSB reactors, this research uniquely evaluated the long-term stress response to BAC by systematically comparing continuous and discontinuous inhibitor exposure scenarios. The novel comparison demonstrated that inhibitor concentration is of minor relevance compared to the biomass-specific cumulative inhibitor load in the reactor. After exceeding a critical biomass-specific cumulative inhibitor load of 6.1-6.5 mg BAC/g VS, continuous and discontinuous exposure to BAC caused comparable significant deterioration in reactor performance, including accumulation of volatile fatty acids (VFA), decreased removal efficiency, reduced methane production, as well as the wash-out, flotation, and disintegration of anaerobic granules. BAC exposures had a more detrimental effect on methanogenesis than on acidogenesis. Moreover, long-term stress by BAC led to an inhibition of protein production, resulting in a decreased protein-to-polysaccharide ratio of extracellular polymeric substances (EPS) that promoted destabilizing effects on the granules. Finally, hydrogenotrophic methanogenesis was triggered. Reactor performance could not be restored due to the severe loss of granular sludge.

Biotoxicity dynamic change and key toxic organics identification of coal chemical wastewater along a novel full-scale treatment process

It is particularly important to comprehensively assess the biotoxicity variation of industrial wastewater along the treatment process for ensuring the water environment security. However, intensive studies on the biotoxicity reduction of industrial wastewater are still limited. In this study, the toxic organics removal and biotoxicity reduction of coal chemical wastewater (CCW) along a novel full-scale treatment process based on the pretreatment process-anaerobic process-biological enhanced (BE) process-anoxic/oxic (A/O) process-advanced treatment process was evaluated. This process performed great removal efficiency of COD, total phenol, NH4+-N and total nitrogen. And the biotoxicity variation along the treatment units was analyzed from the perspective of acute biotoxicity, genotixicity and oxidative damage. The results indicated that the effluent of pretreatment process presented relatively high acute biotoxicity to Tetrahymena thermophila. But the acute biotoxicity was significantly reduced in BE-A/O process. And the genotoxicity and oxidative damage to Tetrahymena thermophila were significantly decreased after advanced treatment. The polar organics in CCW were identified as the main biotoxicity contributors. Phenols were positively correlated with acute biotoxicity, while the nitrogenous heterocyclic compounds and polycyclic aromatic hydrocarbons were positively correlated with genotoxicity. Although the biotoxicity was effectively reduced in the novel full-scale treatment process, the effluent still performed potential biotoxicity, which need to be further explored in order to reduce environmental risk.

Evaluating quaternium-15 effects on Mytilus galloprovincialis: New insights on physiological and cellular responses

Among personal care products, quaternium-15 is prominently featured as a preservative in items such as shampoos, soaps, shaving products, and cosmetics. The widespread use of these products in people's daily routines contributes to quaternium-15 release into aquatic ecosystems. In this context, the primary aim of the study was to assess the physiological and cellular responses of the digestive gland and gills in Mytilus galloprovincialis to quaternium-15 exposure. Cell viability and the ability of digestive gland cells to regulate their volume were evaluated. Additionally, the expression of the genes involved in oxidative stress response was assessed to further substantiate the compound's harmful effects. Results indicated a significant decrease in both the viability of digestive gland cells and their RVD (regulatory volume decrease) capacity when exposed to a hypotonic solution. Furthermore, impairment of digestive gland cell function was corroborated by the modulation of oxidative stress-related gene expression, including SOD, Cat, as well as Hsp70 and CYP4Y1. Similar gene expression alterations were observed in the gills, reflecting impaired functionality in this vital organ as well. In summary, the outcomes of the study provide conclusive evidence of the toxicity of quaternium-15. This underscores the urgent need to further investigate the toxicological effects of this contaminant on aquatic ecosystems and emphasises the necessity of limiting the use of products containing quaternium-15.

Risks of benzalkonium chlorides as emerging contaminants in the environment and possible control strategies from the perspective of ecopharmacovigilance

An unprecedented increase in the use of disinfection products triggered by the coronavirus disease 2019 (COVID-19) pandemic is resulting in aggravating environmental loads of disinfectants as emerging contaminants, which has been considered a cause for worldwide secondary disasters. This review analyzed the literature published in the last decade about occurrence, bioaccumulation, and possible environmental risks of benzalkonium chlorides (BKCs) as emerging contaminants. Results indicated that BKCs globally occurred in municipal wastewater, surface water, groundwater, reclaimed water, sludge, sediment, soil, roof runoff, and residential dust samples across 13 countries. The maximum residual levels of 30 mg/L and 421 μg/g were reported in water and solid environmental samples, respectively. Emerging evidences suggested possible bioaccumulation of BKCs in plants, even perhaps humans. Environmentally relevant concentrations of BKCs exert potential adverse impacts on aquatic and terrestrial species, including genotoxicity, respiratory toxicity, behavioural effects and neurotoxicity, endocrine disruption and reproductive impairment, phytotoxicity, etc. Given the intrinsic biocidal and preservative properties of disinfectants, the inductive effects of residual BKCs in environment in terms of resistance and imbalance of microorganisms have been paid special attention. Considering the similarities of disinfectants to pharmaceuticals, from the perspective of ecopharmacovigilance (EPV), a well-established strategy for pharmaceutical emerging contaminants, we use the control of BKC pollution as a case, and provide some recommendations for employing the EPV measures to manage environmental risks posed by disinfectant emerging contaminants.

The shock of benzalkonium chloride on aerobic granular sludge system and its microbiological mechanism

Quaternary ammonium compounds (QACs) are a kind of biocides and surfactants widely used around the world and wastewater treatment systems were identified as its largest pool. QACs could significantly inhibit microbial activity in biological treatment. Aerobic granular sludge (AGS) is an emerging wastewater biological treatment technology with high efficiency and resistance, but it is still unclear if AGS system could tolerate QACs shock. In this study, a typical QAC (benzalkonium chloride (BACC12)) was selected to investigate its effect on AGS system. Results indicate that BAC could inhibit the pollutants removal performance of AGS system, including COD, NH4+-N and PO43- in the short term and the inhibition ratio had positive correlation with BAC concentration. However, AGS system could gradually adapt to the BAC stress and recover its original performance. BAC shock could destroy AGS structure by decreasing its particle size and finally leading to particle disintegration. Although AGS could secret more EPS to resist the stress, BAC still had significant inhibition on cell activity. Microbial community analysis illustrated that after high BAC concentration shock in short term, Thauera decreased significantly while Flavobacterium became the dominant genus. However, after the performance of AGS system recovered the dominant genus returned to Thauera and relevant denitrifiers Phaeodactylibacter, Nitrosomonas and Pseudofulvimonas also increased. The typical phosphorous removal microorganism Rubrivivax and Leadbetterella also showed the similar trend. The variation of denitrification and phosphorus removal microbial community was consistent with AGS system performance indicating the change of functional microorganism played key role in the AGS response to BAC stress.

Zinc pyrithione induced volatile fatty acids promotion derived from sludge anaerobic digestion: Interrelating the affected steps with microbial metabolic regulation and adaptive responses

The massive use of zinc pyrithione (ZPT, as broad-spectrum bactericides) resulted in its high levels in waste activated sludge (WAS) and affected subsequent WAS treatment. This work revealed the effects of ZPT on the volatile fatty acids (VFAs) during WAS anaerobic digestion, in which VFAs yield was enhanced by approximately 6-9 folds (from 353 mg COD/L in control to 2526-3318 mg COD/L with low level of ZPT (20-50 mg/g TSS)). The ZPT occurred in WAS enabled the acceleration of solubilization, hydrolysis and acidification processes while inhibited the methanogenesis. Also, the low ZPT contributed to the enrichment of functional hydrolytic-acidifying microorganisms (e.g., Ottowia and Acinetobacter) but caused the reduction of methanogens (e.g., Methanomassiliicoccus and Methanothrix). Meta-transcriptomic analysis demonstrated that the critical genes relevant to extracellular hydrolysis (i.e. CLPP and ZapA), membrane transport (i.e. gltI, and gltL), substrates metabolisms (i.e. fadj, and acd), and VFAs biosynthesis (i.e. porB and porD) were all upregulated by 25.1-701.3% with low level of ZPT. Specifically, the ZPT stimulus on amino acids metabolism for VFAs transformation was prominent over carbohydrates. Moreover, the functional species enabled to regulate the genes in QS and TCS systems to maintain favorable cell chemotaxis to adapt the ZPT stress. The cationic antimicrobial peptide resistance pathway was upregulated to blunt ZPT with the secretion of more lipopolysaccharide and activate proton pumps to maintain ions homeostasis to antagonize the ZPT toxicity for high microbial activities, the abundance of related genes was up-regulated by 60.5 to 524.5%. This work enlightened environmental behaviors of emerging pollutants on WAS anaerobic digestion process with interrelations of microbial metabolic regulation and adaptive responses.

Degradation of chloromethylisothiazolinone antimicrobial by Vacuum-Ultraviolet/Ultraviolet irradiation: Reactive species, degradation pathway and toxicity evaluation

Chloromethylisothiazolinone (CMIT) has been extensively used as antimicrobial in cosmetics, detergents, wall paints, and anti-fouling products. To prevent the potential ecological and health risks, the degradation mechanisms and toxicity changes of CMIT by Vacuum-Ultraviolet/Ultraviolet (VUV/UV) irradiation were investigated in this study. VUV/UV irradiation showed better performance on CMIT degradation compared to sole UV photolysis. The removal efficiency of CMIT with photon fluence of 0.6 μEinstein/cm² was 8% and 100% by UV or VUV/UV irradiation, respectively. Radical quenching experiments indicated that 254 nm photolysis, 185 nm photolysis, and •OH oxidation contributed to CMIT degradation during VUV/UV process, with fluence-based apparent rate constants of 0.16, 0.13, and 4.9 μEinstein^-1cm², respectively. The formation of H₂O₂ during VUV/UV process increased to 0.7 mg/L at 4.5 min, and the concentration of •OH ranged within 1.0-3.8 × 10^-12 M. The degradation of CMIT by VUV/UV irradiation in neutral condition was slightly higher than that in acidic and basic conditions. The removal efficiency of CMIT with reaction time of 2 min decreased from 92.2% to 34.3% when the concentration of HCO₃^-/CO₃^2- increased to 1 mM. The degradation of CMIT by VUV/UV irradiation in secondary effluents was lower than that in ultrapure water because of the •OH scavenging effects, but still 2.9 times higher than that by UV photolysis. Four main degradation mechanisms of CMIT were observed during VUV/UV process, including the oxidation of sulfur, addition of hydroxyl groups on the double-carbon-bond, demethylation on the nitrogen, and substitution of organochlorine atom by hydroxyl group. Based on the quantitative structure activity relationship analysis, most products of CMIT underwent complete detoxification to fish and daphnia. 40% of products still showed acute toxicity to algae, but most of them were less toxic than CMIT.

Degradation of a non-oxidizing biocide in circulating cooling water using UV/persulfate: Kinetics, pathways, and cytotoxicity

In industry, isothiazolinone (a mixture containing 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT), CMIT-MIT) as a non-oxidizing biocide is extensively used to control the growth of microorganisms in the circulating cooling water system, which potentially threatens the ecological environment and human health. In this work, the oxidative degradation of CMIT-MIT by UV/persulfate (PS) technology on a laboratory-scale was systematically investigated. The degradation of CMIT-MIT was greatly improved by UV/PS compared with only UV or oxidant. During the photolysis of 60 mg/L PS, the degradation rate and TOC mineralization rate of CMIT-MIT were 91% and 34.7%, respectively. The contributions of ^.OH and SO₄·^- to CMIT-MIT degradation in the UV/PS system were estimated to be 0.93% and 32.12% respectively. The degradation rate of CMIT-MIT decreased slightly with the increase of pH. The presence of SO₄^2- and NO₃^- had no significant effect on the degradation of CMIT-MIT, while the presence of Cl^- and CO₃^2- inhibited the CMIT-MIT removal rate. The degradation pathways and three possible intermediates of CMIT-MIT were obtained. After degradation of CMIT-MIT by UV/PS process, the cytotoxicity decreased within 20 min, effectively indicating that UV/PS could be as a potential technology to remove the CMIT-MIT in water treatment.

Electrochemical degradation of a methyl paraben and propylene glycol mixture: Interference effect of competitive oxidation and pH stability

Endocrine disrupting compounds (EDCs) are one of the many classes of harmful pollutants frequently found in water resources. Even at low concentrations, EDCs might accumulate in the organisms and interfere on numerous processes controlled by hormones. Parabens, for example, are preservatives widely used in pharmaceutical and cosmetic industries, but several studies related them to human breast cancer. It is well-known that electrochemical technologies are an efficient alternative for wastewater treatment, promoting the appropriate destruction of EDCs. However, most studies are applied to single target contaminant solutions, which may neglect the impact from co-exited inorganic/organic pollutants. Based on that, this study aimed to elucidate the interfering effects of two target organic contaminants of very different nature during electrochemical mediated process. For that, methyl paraben (MeP) and propylene glycol (PG) were selected as models of aromatic/phenolic and carboxylate compounds versus low-molecular aliphatic alcohols. These two compounds are often together used in preservative blends and cosmetic/pharmaceutical formulations. PG is not a harmful chemical, but it is present in several types of effluents in relatively high concentrations. Thus, it may interfere on the degradation of numerous pollutants of low concentrations. The electrochemical treatment of a mixture containing 100 mg L^-1 MeP +1000 mg L^-1 PG showed that both contaminants suffered interfering effects. The presence of MeP negatively interfered on PG degradation; the carboxylate compound is more easily oxidized even at lower molecular concentration. On the other hand, the presence of PG showed an unexpected positive effect on MeP degradation, that was not reflected on its mineralization. The results indicate that in addition to the expected effect of anodic competition, polymerization and copolymerization reactions may also occur in the studied system. The use of an acidic buffer medium increased the removal of both contaminants and favored the oxidation pathway over the polymerization. In this case, the increase in the removal was reflected in the mineralization process, which increased up to 6 times when the mixture was treated in the buffered medium.

Effects of municipal wastewater treatment plant effluent quality on aquatic ecosystem organisms

The management and quality monitoring of wastewater have an important role in sustainable development. A recent approach in environmental protection involves the ecotoxicological assessment of effluents to complement the usual chemical evaluations. This study assessed the impacts of wastewater treatment plant (WWTP) effluent quality in a location in Western Cape province, South Africa using organisms that bear different ecosystem-level function responsibilities like the Pseudokirchneriella subcapitata (microalgae), Daphnia magna (crustaceans), and Tetrahymena thermophila (protozoan) in addition to the physicochemical parameters. The effluent showed values of chemical oxygen demand (COD; 41-83 mg L^-1), dissolved oxygen (DO; 2.7-3.1 mg L^-1), Redox potential (189-265 mV), and total dissolved solids (TDS; 656-718 ppm). The protozoan Tetrahymena thermophila ecotoxicity test exhibited toxic effects of the effluents within 24-h with a mean lethal value (LC₅₀) of 1.12% for the winter season. The findings of this study revealed that analyzed physicochemical parameters are within the regulatory water quality acceptable standard thresholds with few exceptions, while the biotests were able to determine the toxicity levels and sensitivities of each test. The results showed that the WWTP whole effluent exerted toxicity to test organisms, but dilution can mitigate the effects considerably. The use of ecotoxicological assessment methods for municipal WWTP effluent may enhance existing water management strategies.

Assessing the distributions and fate of household and personal care chemicals (HPCCs) in the Songhua Catchment, Northeast China

Many household and personal care chemicals (HPCCs) are of environmental concern due to their potential toxicity to humans and wildlife. However, few studies investigate the spatiotemporal variations and fate of HPCCs in large-scale river systems. Here, river water and sediment samples from the Songhua River in Northeast China were analyzed for seven classes of HPCCs. Correlation analysis suggested similar sources and environmental behavior for compounds from the same HPCC classes. In the river water, the concentrations of most HPCCs in the cold season were significantly higher than that of the warm season (p < 0.01). Significantly higher levels of target compounds were found in the downstream water samples of a city, suggesting the influence of human activities on the distributions of HPCCs. The concentrations and distributions of most HPCCs were controlled by primary emission sources. The derived dissolved concentrations of HPCCs suggested that small amounts of caffeine and parabens were partitioned onto particles, while large amounts of many other HPCCs were bound to the particle phase. Water-sediment distribution coefficients (log K_d) ranged from 1.59 for caffeine to 3.95 for benzalkonium chloride-C14. This work presents new insights into the environmental behavior of HPCCs and the factors affecting their fate in river systems.

Ecotoxicity and biodegradation of the bacteriostatic 3,3',4',5-tetrachlorosalicylanilide (TSCA) compared to the structurally similar bactericide triclosan

This article studies the ecotoxicity of 3,3',4',5-tetrachlorosalicylanilide (TCSA) using different bioassays and examines its fate in activated sludge batch experiments. Despite of the common use of TCSA as chemical uncoupler in wastewater treatment systems and as preservative in several products, limited data has been published for its ecotoxicity, while no information is available for its biodegradation. Among different bioassays, the highest toxicity of TSCA was noticed for Daphna magna (48-h LC₅₀: 0.054 mg L^-1), followed by Vibrio fischeri (15-min EC₅₀: 0.392 mg L^-1), Lemna minor, (7-d EC₅₀: 5.74 mg L^-1) and activated sludge respiration rate (3-h EC₅₀: 31.1 mg L^-1). The half-life of TSCA was equal to 7.3 h in biodegradation experiments with activated sludge, while use of mass balances showed that 90% of this compound is expected to be removed in an aerobic activated sludge system, mainly due to biodegradation. A preliminary risk assessment of TSCA using the Risk Quotient methodology showed possible ecological threat in rivers where wastewater is diluted up to 100-fold. Comparison with the structurally similar 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan, TCS) showed that both compounds have similar biodegradation potential and seem to cause analogous toxicity to Vibrio fischeri and activated sludge. Specifically, TCS was biodegraded quite rapidly by activated sludge (half-life: 6.2 h), while EC₅₀ values equal to 0.134 mg L^-1 and 39.9 mg L^-1 were calculated for Vibrio fischeri, and activated sludge respiration rate. Future research should focus on monitoring of TSCA concentrations in the environment and study its effects in long-term toxicity and bioaccumulation tests.

Acute toxicity of piggery effluent and veterinary pharmaceutical cocktail on freshwater organisms

Intensive livestock farming has increased the use of veterinary pharmaceuticals in many developing countries, and this is considered a significant concern to the freshwater ecosystem. However, the information on the potential acute toxicity of piggery effluent waste and the veterinary pharmaceutical effluent discharged into the aquatic environment is limited. This study assessed the adverse effect of a piggery effluent and the cocktail mixtures of high- and low-level doses of three frequently occurring veterinary pharmaceuticals (tetracycline (TETR), ivermectin (IVER), and salicylic acid (SALA)) on freshwater organisms using three representative freshwater biotests organisms: Pseudokirchneriella subcapitata (P. subcapitata), Daphnia magna (D. magna), and Tetrahymena thermophila (T. thermophila). The freshwater organism test results showed that the 24-h and 48-h EC₅₀ algal toxicity to P. subcapitata exposed to 10% unfiltered piggery effluent were 25.6 and 49.3% respectively while the 24-h LC₅₀ value to Cladocera, D. magna exposed to unfiltered piggery effluent was 23.2 (17.7-30.4)%. The 24-h EC₅₀ protozoan toxicity to T. thermophila exposed to 1% HLD veterinary pharmaceuticals was 0.014 μg/L. Thus, the study established the different sensitivities of freshwater organisms to various percentage levels of piggery effluent and high- and low-level doses of veterinary pharmaceutical. The piggery effluent and the pharmaceutical cocktail mixtures have potential toxicological effects on the freshwater ecosystem.

Study on synergistic effect of ozone and monochloramine on the degradation of chloromethylisothiazolinone biocide

In this study, it was found that monochloramine induced the formation of reactive species during ozonation of chloromethylisothiazolinone (CMIT). CMIT was found recalcitrant to chloramine. However, chloramine promoted the degradation of CMIT by ozonation significantly. Hydroxyl radicals contributed most to CMIT degradation (87%) during ozone/chloramine synergistic oxidation process (SOP). The hydroxyl radical exposure during ozone/chloramine SOP was around 7.9 times higher than that of ozonation process. The hydroxyl radical yield of ozone/chloramine SOP was estimated to be 32%. The reaction mechanisms between ozone and chloramine were postulated to include the oxygen transfer reaction to form singlet oxygen, and the formation of hydroxyl radical by the insertion pathway or electron transfer pathway. Chloramine dosage and pH are essential influencing factors. The degradation of CMIT increased from 41% to 74% with increasing chloramine dosage (0-20 μM), and then decreased to 65% when chloramine dosage continually increased to 40 μM. Ozone/chloramine SOP showed better performance at acidic or neutral conditions than basic condition. Based on the intermediates identified, the degradation pathway of CMIT during ozone/chloramine SOP included the oxidation of sulfur atom and the substitution of chlorine group by hydroxyl group. The oxidation of sulfur atom induced lower toxicities of transformation products. The toxicities of hydroxylation products were lower to fish and algae, but higher to daphnia. Based on the GC-ECD results, only trichloromethane (1.94 μg/L) was detected after ozone/chloramine SOP, accounting for 0.17% (μM/μM) of the CMIT removal.

Parabens in stretch mark creams: A source of exposure in pregnant and lactating women

Parabens are widely used as antimicrobial preservatives in personal care products (PCPs). Stretch mark cream is widely used by pregnant and lactating women for the treatment of striae gravidarum. This can be a potential source of paraben exposure, not only to pregnant/lactating women but also to fetuses/newborns. Little is known, however, with regard to the occurrence of parabens in stretch mark creams. In this study, we analyzed eight parabens and their metabolites in 31 popular stretch mark creams originated from various countries including China. The concentrations of Σparaben (sum of eight parabens/metabolites) ranged from 0.007 to 1630 μg/g, with mean and median values of 453 and 273 μg/g, respectively. Methyl- and propyl-parabens accounted for >95% of Σparaben concentrations. We examined the measured paraben concentrations against ingredients listed on the product labels. Parabens were listed as ingredients in those creams that contained concentrations >100 μg/g except for four samples with such high concentrations. Six cream samples that were labeled 'paraben-free' contained trace levels (0.007-9.92 μg/g) of these preservatives. Mean dermal ∑paraben exposure dose from the use of stretch mark creams (30.6 μg/kg bw/day) was well below the current acceptable daily intake value (5 mg/kg bw/day). In comparison to diet and indoor dust ingestion pathways, paraben-laden stretch mark cream may be a major source of paraben exposure in pregnant and lactating women. This study provides information on parabens and other preservatives in stretch mark creams and measures to reduce exposures during pregnancy and lactation.

Occurrences of benzalkonium chloride in streams near a pharmaceutical manufacturing complex in Korea and associated ecological risk

Benzalkonium chloride (BKC) is a commonly used preservative in personal care products and pharmaceutical preparations. However, its ecological risks are not well understood because of lack of monitoring data and ecotoxicological information. In the present study, occurrence of BKC was investigated in the waters near a pharmaceutical manufacturing complex of South Korea and its acute and chronic ecotoxicities were evaluated using Daphnia magna and Japanese medaka (Oryzias latipes). Associated ecological risks were estimated by calculating hazard quotients (HQs). In addition, endocrine disruption potency of BKC was compared with those of other frequently used preservatives using human adrenal (H295R) and rat pituitary (GH3) cells. High concentration of BKC was detected at locations near the pharmaceutical manufacturing plants, i.e., 35.8 μg/L for dodecyl benzyl dimethyl ammonium chloride (BKC-C₁₂), and 21.6 μg/L tetradecyl benzyl dimethyl ammonium chloride (BKC-C₁₄). In Daphnia, 48 h immobilization EC₅₀ and 21 d reproduction NOEC were determined at 41.1 μg/L and ≥10.8 μg/L, respectively. For O. latipes, 96 h LC₅₀ was determined at 246 μg/L while the growth inhibition NOEC was ≥113.4 μg/L following early life stage exposure. BKC significantly up-regulated vitellogenin gene of juvenile fish, indicating its endocrine disrupting potential in fish. Exposure to BKC increased steroid hormone level in H295R cells, and induced cytotoxicity in GH3 cells. HQ values of BKC were determined at greater than one in the ambient water near pharmaceutical manufacturing facilities. Considering high ecological risk and endocrine disrupting potential, long-term consequences of BKC contamination in aquatic ecosystem need to be examined.

Mathematical Modeling Approaches for Assessing the Joint Toxicity of Chemical Mixtures Based on Luminescent Bacteria: A Systematic Review

Developments in industrial applications inevitably accelerate the discharge of enormous substances into the environment, whereas multi-component mixtures commonly cause joint toxicity which is distinct from the simple sum of independent effect. Thus, ecotoxicological assessment, by luminescent bioassays has recently brought increasing attention to overcome the environmental risks. Based on the above viewpoint, this review included a brief introduction to the occurrence and characteristics of toxic bioassay based on the luminescent bacteria. In order to assess the environmental risk of mixtures, a series of models for the prediction of the joint effect of multi-component mixtures have been summarized and discussed in-depth. Among them, Quantitative Structure-Activity Relationship (QSAR) method which was widely applied in silico has been described in detail. Furthermore, the reported potential mechanisms of joint toxicity on the luminescent bacteria were also overviewed, including the Trojan-horse type mechanism, funnel hypothesis, and fishing hypothesis. The future perspectives toward the development and application of toxicity assessment based on luminescent bacteria were proposed.

Exposure to carbamate fungicide iodocarb does not affect reproductive behavior or milt volumes in precocious male brown trout (Salmo trutta L.) parr

Previous studies with olfactory-disturbing pesticides resulted after exposure in disturbed behavior and physiology in fish. In the present experiment, reproductive behavior and milt volumes of precocious brown trout (Salmo trutta L.) male parr were studied in a large stream aquarium after exposure to the olfactory-disturbing fungicide 15 μg l^-1 IPBC (iodocarb; 3-iodo-2-propynyl butyl carbamate) for 96 h. The statistical analyses did not reveal any significant differences for time attending females between controls and IPBC-exposed males. Furthermore, there were no significant differences in milt volumes. However, when taking all fish into consideration, there were significant differences in milt volumes between parr that had been attending females and those had not been attending females. Controls that had attended females had significantly higher milt volumes than controls or IPBC-exposed males that had not attended females. Taking all control and IPBC parr into consideration, there was a statistically significant positive correlation between time attended females and volume of milt and gonadosomatic index (GSI), respectively. In summary, 15 μg l^-1 IPBC did not have any significant effects on mature male parr reproductive behavior and milt volumes.

Preservatives accelerate the horizontal transfer of plasmid-mediated antimicrobial resistance genes via differential mechanisms

Increasing concentrations of preservatives have been detected in environments due to the overuse and misuse of preservatives in food and personal care products. Recent studies have relied heavily on the toxicity, biodegradability, and fate of preservatives in the environment. However, the biological effects of preservatives on antimicrobial resistance, which poses great threats to public health worldwide, are largely unknown. This study investigated three preservatives for their ability and mechanisms of promoting horizontal transfer of antimicrobial resistance genes (ARGs). The results demonstrated that these preservatives (sodium nitrite, sodium benzoate, and triclocarbon), under daily-use concentrations, led to concentration-dependent increases in conjugative transfer by 1.24-2.63, 6.79-7.05, and 2.17-4.31 folds compared with the control group. Even these three preservatives had different patterns on generating intracellular reactive oxidative species (ROS) and reactive nitrogen species (RNS), all of them could stimulate radical-induced RpoS regulon and SOS response, increase cell membrane permeability, and regulate conjugative transfer-related genes, subsequently promoting horizontal transfer of ARGs. The present results expanded the understanding of biological effects induced by preservatives, and provided mechanistic insight into the preservatives-induced resistance. This study also opens an intriguing question on the roles of emerging contaminants including preservatives in the emerging and spread of ARGs in various environments.

An Insight into Ingredients of Toxicological Interest in Personal Care Products and A Small–Scale Sampling Survey of the Greek Market: Delineating a Potential Contamination Source for Water Resources

Wastewater is not a waste but a valuable resource that should be reused. Nevertheless, it should be devoid of physical, chemical, and microbiological parameters that can harm the consumer. Along with the multitude of possible pollutants found in wastewater treatment plants (WWTPs), emerging pollutants, such as Personal Care Products (PCPs), have arisen. The present research examines some of the main ingredients commonly found in PCPs, focusing on their toxicological profile on their occurrence in WWTPs influents and effluents worldwide and on their persistence and biodegradability. A small-scale market sampling of PCPs was performed in Athens, Greece, in June 2019, and their individual ingredients were recorded, coded according to their main activity, scanned for the presence of ingredients of important toxicological profile, and finally analyzed for the presence of other candidates of toxicological interest. Results show that some ingredients of concern (i.e., parabens and triclosan) are a decreasing trend. On the other hand, information on the presence of synthetic musks and perfume synthesis is scarce and encumbered by brand protection. Finally, UV filters are numerous, and they are used in various combinations, while other ingredients of toxicological interest are also present. Since the reclaimed water may well be used to cover irrigation needs in Greek areas with water deficiency or to enrich bodies of surface water, it is important to know what PCP ingredients are on the rise in the market, to monitor their presence in WWTPs influents and effluents and to extend research on their environmental fate and behavior.

Benzalkonium Chlorides: Uses, Regulatory Status, and Microbial Resistance

Benzalkonium chlorides (BACs) are chemicals with widespread applications due to their broad-spectrum antimicrobial properties against bacteria, fungi, and viruses. This review provides an overview of the market for BACs, as well as regulatory measures and available data on safety, toxicity, and environmental contamination. We focus on the effect of frequent exposure of microbial communities to BACs and the potential for cross-resistant phenotypes to emerge. Toward this goal, we review BAC concentrations in consumer products, their correlation with the emergence of tolerance in microbial populations, and the associated risk potential. Our analysis suggests that the ubiquitous and frequent use of BACs in commercial products can generate selective environments that favor microbial phenotypes potentially cross-resistant to a variety of compounds. An analysis of benefits versus risks should be the guidepost for regulatory actions regarding compounds such as BACs.

Biotoxicity assessment and toxicity mechanism on coal gasification wastewater (CGW): A comparative analysis of effluent from different treatment processes

Even though coal gasification wastewater (CGW) treated by various biochemical treatment processes generally met the national discharge standard, its potential biotoxicity was still unknown. Therefore, in this study, bioassay with Tetrahymena thermophila (T. thermophila) was conducted to comprehensively evaluate the variation of biotoxicity in raw CGW and the treated effluent from lab-scale micro-electrolysis integrated with biological reactor (MEBR), single iron-carbon micro-electrolysis (ICME) and conventional activated sludge (CAS) processes. The results illustrated that raw CGW presented intensive acute toxicity with 24 h EC₅₀ value of 8.401% and toxic unit (TU) value of 11.90. Moreover, it performed significant cell membrane destruction and DNA damage even at 10% dilution concentration. The toxicant identification results revealed that multiple toxic polar compounds such as phenolic, heterocyclic and polycyclic aromatic compounds were the main contributors for biotoxicity. Furthermore, these compounds could accelerate oxidative stress, thereby inducing oxidative damage of cell membrane and DNA. As for treated effluent, TU value was decreased by 90.58% in MEBR process. An effective biotoxicity reduction was achieved in MEBR process owing to high removal efficiency in polar organic toxicants. In contrast, effluent from ICME and CAS processes presented relatively high acute toxicity and genotoxicity, because various heterocyclic and polycyclic aromatic compounds were difficult to be degraded in these processes. Therefore, it was suggested that MEBR was a potential and feasible process for improving CGW treatment and minimizing ecological risk.

Tolerance and resistance characteristics of microalgae Scenedesmus sp. LX1 to methylisothiazolinone

Methylisothiazolinone (MIT) has been widely used to control bacterial growth in reverse osmosis (RO) systems. However, MIT's toxicity on microalgae should be determined because residual MIT is concentrated into RO concentrate (ROC) and might have a severe impact on microalgae-based ROC treatment. This study investigated the tolerance of Scenedesmus sp. LX1 to MIT and revealed the mechanism of algal growth inhibition and toxicity resistance. Scenedesmus sp. LX1 was inhibited by MIT with a half-maximal effective concentration at 72 h (72 h-EC₅₀) of 1.00 mg/L, but the strain recovered from the inhibition when its growth was not completely inhibited. It was observed that this inhibition's effect on subsequent growth was weak, and the removal of MIT was the primary reason for the recovery. Properly increasing the initial algal density significantly shortened the adaptation time for accelerated recovery in a MIT-containing culture. Photosynthesis damage by MIT was one of the primary reasons for growth inhibition, but microalgal cell respiration and adenosine triphosphate (ATP) synthesis were not completely inhibited, and the algae were still alive even when growth was completely inhibited, which was notably different from observations made with bacteria and fungi. The algae synthesized more chlorophyll, antioxidant enzymes of superoxide dismutase (SOD) and catalase (CAT), and small molecules, such as reduced glutathione (GSH), to resist MIT poisoning. The microalgae-based process could treat the MIT-containing ROC, since MIT was added for only several hours a week in municipal wastewater reclamation RO processes, and the MIT average concentration was considerably lower than the maximum concentration that algae could tolerate.

Ecotoxicological potential of the biocides terbutryn, octhilinone and methylisothiazolinone: Underestimated risk from biocidal pathways?

The use of biocides by industry, agriculture and households increased throughout the last two decades. Many new applications with known substances enriched the variety of biocidal pollution sources for the aquatic environment. While agriculture was the major source for a long time, leaching from building facades and preservation of personal care and cleaning products was identified as new sources in the last few years. With the different usage forms of biocidal products the complexity of legislative regulation increased as well. The requirements for risk assessment differ from one law to another and the potential risk of substances under different regulations might be underestimated. Still EC₅₀ and predicted no-effect concentration (PNEC) values gained from testing with different species are the core of environmental risk assessment, but ecotoxicological data is limited or lacking for many biocides. In this study the biocides widely used in facade coatings and household products terbutryn, octhilinone and methylisothiazolinone were tested with the Daphnia magna acute immobilisation assay, the neutral red uptake assay and the ethoxyresorufin-O-deethylase (EROD) assay, performed with rainbow trout liver (RTL-W1) cells. Further, the MTT assay with the ovarian cell line CHO-9 from Chinese hamster was used as mammalian model. Octhilinone induced the strongest effects with EC₅₀ values of 156μg/l in the D. magna assay, while terbutryn showed the weakest effects with 8390μg/l and methylisothiazolinone 513μg/l respectively. All other assays showed higher EC₅₀ values and thus only weak effects. EROD assays did not show any effects. With additional literature and database records PNEC values were calculated: terbutryn reached 0.003μg/l, octhilinone 0.05μg/l and methylisothiazolinone 0.5μg/l. Potential ecotoxicological risks of these biocides are discussed, considering environmental concentrations.

Ultrahigh selective adsorption of zwitterionic PPCPs both in the absence and presence of humic acid: Performance and mechanism

Since zwitterionic PPCPs could be combined with humic acid (HA) leading to certain contaminants residue in aqueous solution, adsorbents with much stronger binding with zwitterionic PPCPs were needed to avoid this phenomenon. Through comparison of serial magnetic carboxyl modified hypercrosslinked resins including MA10, MA30, MA40 and MA70, MA50 was found to exhibit ultrahigh selective adsorption of zwitterionic PPCPs including tetracycline and quinolone antibiotics due to the remarkable synergistic effects generated from cation exchange interaction and non-ion exchange interaction. To figure out the effect of HA, other five adsorbents including hypercrosslinked resin Q100, aminated hypercrosslinked resin GMA50, anion exchange resin MIEX, wood-based activated carbon F400D and coal-based activated carbon Norit were chosen as comparison to MA50 in adsorption performance of tetracycline (TC) and ciprofloxacin (CPX). It turned out that the percentage of CPX or TC combined with HA in aqueous solution varied greatly for studied adsorbents. There existed serious false-positive adsorption during the adsorption process by some commercial adsorbents such as MIEX and F400D, while MA50 exhibited relatively lower false-positive adsorption, ensuring the maximum safety of effluents. Breakthrough tests showed that MA50 had significant advantages in PPCPs removal at environment concentration, indicating its potential in application for real water.

Quaternary ammonium cationic surfactants increase bioactivity of indoxacarb on pests and toxicological risk to Daphnia magna

Agricultural researchers have always been pursuing synergistic technique for pest control. To evaluate the combined effects of quaternary ammonium compounds (QACs) and indoxacarb, their independent and joint toxicities to two insects, Spodoptera exigua and Agrotis ipsilon, and the aquatic organism, Daphnia magna, were determined. Results showed that all of five tested QACs increased the toxicity of indoxacarb to S. exigua and A. ipsilon. Both of benzyldimethyltetradecylammonium chloride (TDBAC) and benzododecinium chloride (DDBAC) exhibited significantly increased toxicities to S. exigua with synergic ratios of 11.59 and 6.55, while that to A. ipsilon were 2.60 and 3.45, respectively. When exposed to binary mixtures of QACs and indoxacarb, there was synergism on D. magna when using additive index and concentration addition methods, but only TDBAC, STAC and ODDAC showed synergistic effect in the equivalent curve method. The results indicate that the surfactants can be used as the synergists of indoxacarb in the control of Lepidoptera pests. However, their environmental risks should not be neglected owing to the high toxicity of all mixtures of indoxacarb and five QACs to D. magna.

Sorption and biodegradation of propylparaben in greywater by aerobic attached-growth biomass

Greywater (GW) is becoming an important alternative water source for non-potable purposes, but requires treatment to remove contaminants, including micropollutants that in GW mainly originate from personal care products. Biofilters are commonly used for onsite GW treatment, but there are still significant knowledge gaps regarding their ability and mechanism of micropollutants removal. This study investigates the removal of propylparaben (PPB) by aerobic attached-growth biomass, quantifying the kinetics and the interplay between sorption and biodegradation. The ability of biomass, collected from a pilot scale biofilter treating real GW, to eliminate PPB from both synthetic greywater (SGW) and deionized (DI) water was studied in laboratory batch experiments. Elimination of PPB was found to proceed via sorption to biomass followed by biodegradation. Sorption of PPB by biomass in SGW and in DI water exhibited similar kinetics, fitting Langmuir isotherm with the maximum adsorbed amount of 9.8mg_PPB g_biomass^-1. PPB biodegradation exhibited first-order kinetics in both SGW and DI water, with a 30h lag-phase in SGW and no lag-phase in DI water. This difference is attributed to presence of readily-biodegradable organic matter in the SGW. Actual PPB degradation rate in both cases (excluding the lag phase in SGW) was very similar, 62mg_PPB g_biomass^-1d^-1, yielding almost full mineralization. These findings show the relative contribution of the major processes involved in PPB elimination by biofilters and can be applied for designing GW treatment units.

Methylisothiazolinone toxicity and inhibition of wound healing and regeneration in planaria

Methylisothiazolinone (MIT) is a common biocide used in cosmetic and industrial settings. Studies have demonstrated that MIT is a human sensitizer, to the extent that in 2013 MIT was named allergen of the year. Recently, we showed that MIT exposure in Xenopus laevis (the African clawed frog) inhibits wound healing and tail regeneration. However, it is unknown whether MIT affects these processes in other animals. Here, we investigated the effects of MIT exposure in planaria-non-parasitic freshwater flatworms able to regenerate all tissues after injury. Using a common research strain of Dugesia japonica, we determined that intact planarians exposed to 15μM MIT displayed both neuromuscular and epithelial-integrity defects. Furthermore, regenerating (head and tail) fragments exposed to 15μM MIT failed to close wounds or had significantly delayed wound healing. Planarian wounds normally close within 1h after injury. However, most MIT-exposed animals retained open wounds at 24h and subsequently died, and those few animals that were able to undergo delayed wound healing without dying exhibited abnormal regeneration. For instance, head regeneration was severely delayed or inhibited, with anterior structures such as eyes failing to form in newly produced tissues. These data suggest that MIT directly affects both wound healing and regeneration in planarians. Next, we investigated the ability of thiol-containing antioxidants to rescue planarian wound closure during MIT exposure. The data reveal both n-acetyl cysteine and glutathione were each able to fully rescue MIT inhibition of wound healing. Lastly, we established MIT toxicity levels by determining the LC₅₀ of 5 different planarian species: D. japonica, Schmidtea mediterranea, Girardia tigrina, Girardia dorotocephala, and Phagocata gracilis. Our LC₅₀ data revealed that concentrations as low as 39μM (4.5ppm) are lethal to planarians, with concentrations of just 5μM inhibiting wound healing, and suggest that phylogeny is predictive of species toxicity levels. Together these results indicate MIT may have broad wound healing effects on aquatic species in general and are not limited to X. laevis alone. Future studies should investigate the impact of MIT on wound healing in other organisms, including non-aquatic organisms and mammals.

Occurrence of personal care products as emerging chemicals of concern in water resources: A review

Personal care products (PCPs) are a diverse group of common household substances used for health, beauty and cleaning purposes. These include disinfectants, fragrances, insect repellents, preservatives and UV filters, among others. Some of them are considered chemicals of emerging concern due to their presence and negative impact on aquatic ecosystems, specially related to endocrine disruption and reproductive disorders. The entry of those chemicals to water bodies occurs mainly through the sewage effluents from wastewater treatment plants due to their incomplete or inefficient removal. The purpose of this review was to collect and analyze data about the incidence and concentrations of PCPs reported as emerging pollutants in different water matrices, including wastewater influents and effluents. Our database is composed of 141 articles with information about 72 PCPs recorded as emerging pollutants in 30 countries, in concentrations ranging from 0.029ng/L to 7.811×10⁶ng/L. Fragrances, antiseptics and sunscreens were the most reported groups. As expected, the largest number of PCPs documented as emerging pollutants were found in wastewater treatment plant effluents with a total of 64 compounds, compared to 43 in surface water and 23 in groundwater, which evidence the anthropological contribution of PCPs to water bodies. These molecules were found in all the continents, however, there is a lack of information regarding the presence of emerging pollutants from PCPs in developing countries. Therefore, we suggest further efforts in assessing the occurrence and concentrations of these chemicals in those areas.

Toxicity of Quaternary Ammonium Compounds (QACs) as single compounds and mixtures to aquatic non-target microorganisms: Experimental data and predictive models

The toxic effects of five Quaternary Ammonium Compounds (QACs) that are widely used as active ingredients in personal care products were assessed using the bioluminescent bacterium Aliivibrio fischeri (formerly Vibrio fischeri) (Microtox® test system). The experimental results showed a relevant toxicity for almost all of the single QACs, with IC₅₀ values lower than 1mgL^-1. Analysis of the mode of action through the application of the Quantitative Structure-Activity Relationship (QSAR) models indicated an a-specific reactivity for most of the QACs toward A. fischeri. Only hexadecyl trimethyl ammonium chloride (ATMAC-16) behaved as a polar-narcotic, with a low reactivity toward the bacterial cell membrane. The concentration response curves of the different binary and multicomponent mixtures of QACs were also evaluated with respect to the predictions from the Concentration Addition (CA) and Independent Action (IA) models. For almost all of the binary and multicomponent mixtures (7 out of 11 mixtures tested), an agreement between the experimental and predicted IC_x was observed and confirmed via application of the Model Deviation Ratio (MDR). In four cases, some deviations from the expected behaviour were observed (potential antagonistic and synergistic interactions) at concentrations on the order of hundreds of µgL^-1, which could be of environmental concern, especially in the case of synergistic effects. The analysis of aquatic ecotoxicity data and the few available values of the measured environmental concentrations (MECs) from the literature for wastewaters and receiving waterbodies suggest that a potential risk toward aquatic life cannot be excluded.

Toxicological interactions of ibuprofen and triclosan on biological activity of activated sludge

The growing use of pharmaceutical and personal care products increases their concentrations in the wastewater entering treatment plants and their levels into biological reactors. The most extended biological wastewater treatment is the activated sludge process. The toxicity of ibuprofen and triclosan, individually and combined, was studied by tracking the biological activity of the activated sludge measuring oxygen uptake rate and the inhibition of the esterase activity. Short-term exposure produced significant inhibition in oxygen uptake, with lower damage to enzymatic activity. Median effect values for oxygen uptake inhibition were 64±13mgL^-1 and 0.32±0.07mgL^-1 for ibuprofen and triclosan respectively using 125mgL^-1 activated sludge. For the inhibition of enzymatic activity values were 633±63mgL^-1 for ibuprofen and 1.94±0.32mgL^-1 for triclosan. Results indicated that oxygen uptake, related to primary activity of microorganisms, was more strongly affected than the enzymatic activity associated to energy consumption. Toxicity interactions were determined using the Combination Index-isobologram method. Results showed antagonism at lower values of affected population, after which the mixtures tended to additivity and synergism. For the case of enzymatic activity, the antagonism was less marked and the additivity range was higher.

Variations in toxicity of semi-coking wastewater treatment processes and their toxicity prediction

Chemical analyses and bioassays using Vibrio fischeri and Daphnia magna were conducted to evaluate comprehensively the variation of biotoxicity caused by contaminants in wastewater from a semi-coking wastewater treatment plant (WWTP). Pretreatment units (including an oil-water separator, a phenols extraction tower, an ammonia stripping tower, and a regulation tank) followed by treatment units (including anaerobic-oxic treatment units, coagulation-sedimentation treatment units, and an active carbon adsorption column) were employed in the semi-coking WWTP. Five benzenes, 11 phenols, and five polycyclic aromatic hydrocarbons (PAHs) were investigated as the dominant contaminants in semi-coking wastewater. Because of residual extractant, the phenols extraction process increased acute toxicity to V. fischeri and immobilization and lethal toxicity to D. magna. The acute toxicity of pretreated wastewater to V. fischeri was still higher than that of raw semi-coking wastewater, even though 90.0% of benzenes, 94.8% of phenols, and 81.0% of PAHs were removed. After wastewater pretreatment, phenols and PAHs were mainly removed by anaerobic-oxic and coagulation-sedimentation treatment processes respectively, and a subsequent active carbon adsorption process further reduced the concentrations of all target chemicals to below detection limits. An effective biotoxicity reduction was found during the coagulation-sedimentation and active carbon adsorption treatment processes. The concentration addition model can be applied for toxicity prediction of wastewater from the semi-coking WWTP. The deviation between the measured and predicted toxicity results may result from the effects of compounds not detectable by instrumental analyses, the synergistic effect of detected contaminants, or possible transformation products.

Transformation and products of captopril with humic constituents during laccase-catalyzed oxidation: Role of reactive intermediates

The transformation of captopril (CAP), a widely-used thiol drug, was studied with the presence of dissolved model humic constituents (HCs) in a laccase-catalyzed system. Reaction products were analyzed by ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry and condensed fukui function computation. CAP reacted with different model HCs in the enzymatic system for 1 h, ranging from 75% (syringic acid) to 96% (p-coumaric acid). In the absence of HCs, only 15% of CAP was removed through self-coupling. The presence of HCs apparently changed the transformation of CAP in aqueous environment, and the HC reactive intermediates played an important role. First, during laccase catalysis, HCs with different structures were oxidized to produce reactive intermediates, including phenoxyl radical cation, ortho-, and para-quinone intermediates. Second, these intermediates were readily attacked by CAP via nucleophilic reactions, forming C-S-C covalent conjugates. More importantly, the standard reduction potential of these intermediates is a critical parameter, as PCA showed the highest reactivity to the nucleophilic addition reaction with CAP by forming phenoxy radical cations. While SYR showed the least reactivity due to the formation of para-quinone intermediates. Therefore, the functional groups on HCs could greatly influence the cross-coupling with CAP, as well as the type and stability of the coupling products. This work clearly demonstrated the transformation of CAP and other thiol drugs with the presence of HCs in aqueous environment, which is similar to the natural humification process.

Cytotoxicity, haemolymphatic parameters, and oxidative stress following exposure to sub-lethal concentrations of quaternium-15 in Mytilus galloprovincialis

The presence of a xenobiotic in the environment can often represent a risk for living organisms. Quaternium-15, a preservative, is one of the most used substances and is added to several cosmetics and other industrial products. For this reason,kwowing the bio-indicator of the marine environment, the toxicological effects potentially elicited by this preservative on the marine invertebrate Mytilus galloprovincialis were studied. The results of this work confirm that quaternium-15, used at 0.1 and 1mg/l concentrations, while metabolized in M. galloprovincialis, causes a decrease in cellular viability, and remarkable changes to the defense and antioxidant system. In fact, haemocyte viability is dramatically reduced, and haemolymphatic parameter measurements indicate a stress on the animal. Moreover, an increase in radical species production, in Thiobarbituric Acid Reactive Species (TBARS) concentration, and in the Heat Shock Protein 70 amount, were observed in hepatopancreas. These changes suggest that the antioxidant systems are activated to overwhelm the oxidative damage induced by quaternium-15. Quaternium-15 jeopardizes both the defense and antioxidant systems. These results provide essential information with the biological fate of quaternium-15 in aquatic organisms, and confirm that biomarkers represent an important tool for modern environmental assessments as they can help with the prediction of pollutants involved in the monitoring program.

A review of practical tools for rapid monitoring of membrane bioreactors

The production of high quality effluent from membrane bioreactors (MBRs) arguably requires less supervision than conventional activated sludge (CAS) processes. Nevertheless, the use of membranes brings additional issues of activated sludge filterability, cake layer formation and membrane fouling. From a practical standpoint, process engineers and operators require simple tools which offer timely information about the biological health and filterability of the mixed liquor as well as risks of membrane fouling. To this end, a range of analytical tools and biological assays are critically reviewed from this perspective. This review recommends that Capillary Suction Time (CST) analysis along with Total Suspended and Volatile Solids (TSS/VSS) analysis is used daily. For broad characterisation, total carbon and nitrogen analysis offer significant advantages over the commonly used chemical and biological oxygen demand (COD/BOD) analyses. Of the technologies for determining the vitality of the microbial biomass the most robust and reproducible, are the second generation adenosine-5'-triphosphate (ATP) test kits. Extracellular polymer concentrations are best monitored by measurement of turbidity after centrifugation. Taken collectively these tools can be used routinely to ensure timely intervention and smoother operation of MBR systems.

Mechanism and toxicity research of benzalkonium chloride oxidation in aqueous solution by H2O2/Fe(2+) process

As widely used disinfectants, the pollution caused by benzalkonium chloride (BAC) has attracted a lot of attention in recent years. Since it is not suitable for biodegradation, BAC was degraded firstly by Fenton advanced oxidation technologies (AOTs) in this research to enhance the biodegradability of the pollutions. The result revealed that the optimal molar ratio of H2O2/Fe(2+) for BAC degradation was 10:1, and the COD removal rate was 32 %. To clarify the pathway of degradation, the technique of GC-MS was implemented herein to identify intermediates and the toxicity of those BAC intermediates were also novelty tested through microbial fuel cells (MFC). The findings indicated that ten transformation products including benzyl dimethyl amine and dodecane were formed during the H2O2/Fe(2+) processes, which means the degradation pathway of BAC was initiated both on the hydrophobic (alkyl chain) and hydrophilic (benzyl and ammonium moiety) region of the surfactant. The toxicity of BAC before and after treated by Fenton process was monitored through MFC system. The electricity generation was improved 337 % after BAC was treated by H2O2/Fe(2+) oxidation processes which indicated that the toxicity of those intermediates were much lower than BAC. The mechanism and toxicity research in this paper could provide the in-depth understanding to the pathway of BAC degradation and proved the possibility of AOTs for the pretreatment of a biodegradation process.

Possible underestimations of risks for the environment due to unregulated emissions of biocides from households to wastewater

The aim of this study was to investigate the role of household products as possible sources of biocidal active substances in municipal wastewater and their regulation under the Biocidal Products Regulation (EU) 528/2012. In 131 households, we investigated the prevalence of products used to control pests, washing and cleaning agents and select personal care products with high release to wastewater. Inventories of these products were established with the help of barcode scanning. All uses of biocidal active substances were evaluated regarding their assessment under the Biocidal Products Regulation. 2963 products were scanned in total, with 48% being washing and cleaning agents, 43% personal care products and 9% products used to control pests. Biocidal active substances were found in each household. These were observed primarily in washing and cleaning agents and personal care products (90%), while only a small percentage of the observations of biocidal active substances was in biocidal products. 64% of the observations of biocidal active substances were in applications that do not fall under the Biocidal Products Regulation and are thus not subject to its environmental risk assessment. This study shows clearly that risks for the environment are underestimated because unregulated emissions to wastewater occur. It demonstrates that there are gaps in the current chemical legislation that lead to a release of substances into wastewater that were not subject to environmental risk assessment under the Biocidal Products Regulation. This is one example of the limitations of scientific risk assessment of chemicals - its complexity is immense. From our point of view, the results underline the importance of a sustainable use of the substances as this is the only way to decrease yet unidentified risks.

Electrocoagulation: Simply a Phase Separation Technology? The Case of Bronopol Compared to Its Treatment by EAOPs

Electrocoagulation (EC) has long been considered a phase separation process, well suited for industrial wastewater treatment since it causes a quick, drastic decay of organic matter content. This research demonstrates that EC also behaves, at least for some molecules like the industrial preservative bronopol, as an effective transformation technology able to yield several breakdown products. This finding has relevant environmental implications, pointing to EC as a greener process than described in literature. A thorough optimization of EC was performed with solutions of bronopol in a simulated water matrix, yielding the complete disappearance of the parent molecule within 20 min at 200 mA (∼20 mA/cm(2)), using Fe as the anode and cathode. A 25% of total organic carbon (TOC) abatement was attained as maximum, with bronopol being converted into bromonitromethane, bromochloromethane, formaldehyde and formic acid. N atoms were accumulated as NO3(-), whereas Br(-) was stable once released. This suggests that mediated oxidation by active chlorine, as well as by hydroxyl radicals resulting from its reaction with iron ions, is the main transformation mechanism. Aiming to enhance the mineralization, a sequential combination of EC with electro-Fenton (EF) as post-treatment process was proposed. EF with boron-doped diamond (BDD) anode ensured the gradual TOC removal under the action of (•)OH and BDD((•)OH), also transforming Br(-) into BrO3(-).

Risk assessment of environmental mixture effects

Determining interactions of multi-component environmental mixtures towards accurate risk assessment.

Effects of triclosan and triclocarban on the growth inhibition, cell viability, genotoxicity and multixenobiotic resistance responses of Tetrahymena thermophila

The information about adverse effects of emerging contaminants on aquatic protozoa is very scarce. The growth inhibition effect, cell viability, genotoxicity and multixenobiotic resistance (MXR) responses of two commonly used antimicrobial agents, triclosan (TCS) and triclocarban (TCC) to protozoan Tetrahymena thermophila were investigated in this study. The results revealed that TCS and TCC can inhibit the growth of T. thermophila with 24h EC50 values of 1063 and 295μgL(-1), respectively. The impairment of plasma membrane was observed after 2h exposure of TCS or TCC at the level of mg/L. Furthermore, it is noticeable that at environmentally relevant concentration (1.0μgL(-1)), both TCS and TCC can lead to statistically significant DNA damage in T. thermophila, while the inhibition of growth and change of cell viability cannot be observed. Our results firstly provide the evidence for genotoxic effects of TCS and TCC on the freshwater protozoan. Additionally, both TCS and TCC were found to inhibit the efflux transporter activities, with the inhibitory potencies of 39% and 40% (using verapamil as a model inhibitor), respectively. Particularly, TCC could significantly down-regulate the expression of MXR related gene Abcb15, which encodes the membrane efflux protein that acting as P-gp in T. thermophila. The results raise the awareness of potential aquatic ecological and human health risks from the exposure of TCS and TCC, as they might potentiate the toxic effects by chemosensitizing with co-existing toxicants.