Nano-MoO2 activates peroxymonosulfate for the degradation of PAH derivatives

Facile synthesis of defect-rich interfacial Mo/MoO2 for efficient peroxymonosulfate activation and refractory pollutants degradation

Peroxymonosulfate-based advanced oxidation process (PMS-AOP) has shown great potential in sewage purification, and catalyst development capable of efficient PMS activation is a key while challenging element. Herein we reported a facile electro-explosive route to synthesize the oxygen vacancy (Vo)-enriched Mo/MoO2 without using chemical reagents. The detailed studies suggested that the synergy of Mo active site and Vo in the catalyst significantly boosted the activation kinetics of PMS. Evidently, the Mo site of different oxidation states contributed to chemical activation of PMS, while the Vo favored the activation of PMS and the generation of non-radical 1O2 species. As a result, the Mo/MoO2-10 h/PMS system delivered a complete removal of acid orange 7 (AO7) within 4 min, significantly exceeding the activity of Mo/PMS (16%), MoO2-H/PMS (25%) and most of other PMS-based systems. Moreover, the current system showed high potential for removal of different pollutants including antibiotics and organic dyes. Radical quenching experiments and electron paramagnetic resonance (EPR) studies revealed that the 1O2 species was significant for AO7 decomposition. This work provided a novel strategy to a batch-scale synthesis of high-performance PMS activator for water remediation in practice.

A review on recent advancements in the treatment of polyaromatic hydrocarbons (PAHs) using sulfate radicals based advanced oxidation process

Polyaromatic hydrocarbons (PAHs) are the most persistent compounds that get contaminated in the soil and water. Nearly 16 PAHs was considered to be a very toxic according US protection Agency. Though its concentration level is low in the environments but the effects due to it, is enormous. Advanced Oxidation Process (AOP) is an emergent methodology towards treating such pollutants with low and high molecular weight of complex substances. In this study, sulfate radical (SO4‾•) based AOP is emphasized for purging PAH from different sources. This review essentially concentrated on the mechanism of SO4‾• for the remediation of pollutants from different sources and the effects caused due to these pollutants in the environment was reduced by this mechanism is revealed in this review. It also talks about the SO4‾• precursors like Peroxymonosulfate (PMS) and Persulfate (PS) and their active participation in treating the different sources of toxic pollutants. Though PS and PMS is used for removing different contaminants, the degradation of PAH due to SO4‾• was presented particularly. The hydroxyl radical (•OH) mechanism-based methods are also emphasized in this review along with their limitations. In addition to that, different activation methods of PS and PMS were discussed which highlighted the performance of transition metals in activation. Also this review opened up about the degradation efficiency of contaminants, which was mostly higher than 90% where transition metals were used for activation. Especially, on usage of nanoparticles even 100% of degradation could be able to achieve was clearly showed in this literature study. This study mainly proposed the treatment of PAH present in the soil and water using SO4‾• with different activation methodologies. Particularly, it emphasized about the importance of treating the PAH to overcome the risk associated with the environment and humans due to its contamination.

Promoting oxygen vacancies utility for tetracycline degradation via peroxymonosulfate activation by reduced Mg-doped Co3O4: Kinetics and key role of electron transfer pathway

Developing cobalt-based catalysts with a high abundance of oxygen vacancies (Vo) and exceptional Vo utility efficiency for the prompt removal of stubborn contaminants through peroxymonosulfate (PMS) activation poses a significant challenge. Herein, we reported the synthesis of the reduced Mg-doped Co3O4 nanosheets, i.e. Mg-doped Co3O4-r, via Mg doping and followed by NaBH4 reduction, aiming to degrade tetracycline (TC). Various characterization results illustrated that NaBH4 reduction imparted higher Vo utility efficiency to Mg-doped Co3O4-r, along with an ample presence of reduced Co2+ species and an increased surface area, thereby substantially elevating PMS activation capability. Notably, Mg-doped Co3O4-r achieved more than 97.9% degradation of 20 mg/L TC within 10 min, showing an over 8-fold increase in reaction rate relative to the Mg-doped Co3O4 (kobs: 0.3285 min-1 vs 0.0399 min-1). The high removal efficiency of TC was sustained across a broad pH range of 3-11, even in the presence of common anions and humic acid. Radical quenching trials, EPR outcomes, and electrochemical analysis indicated that neither radicals nor 1O2 were the primary active species. Instead, electron transfer pathway played a dominant role in TC degradation. The Mg-doped Co3O4-r displayed excellent recyclability and versatility. Even after the fifth cycle, it maintained an impressive 83.0% removal of TC. Furthermore, it exhibited rapid degradation capabilities for various pollutants, including levofloxacin, pefloxacin, ciprofloxacin, malachite green, and rhodamine B. The TC degradation pathway was proposed based on LC-MS determination of its degradation intermediates. This study showcases an innovative strategy for the rational design of an efficient cobalt-based activator, leveraging electron transfer pathways through PMS activation to degrade antibiotics effectively.

Insights into mechanism of peroxymonosufate activation by Mo single-atom catalysts: Singlet oxygen evolution and role of Mo-N coordination

Recently, the Fenton-like reaction using peroxymonosulfate (PMS) has been acknowledged as a potential method for breaking down organic pollutants. In this study, we successfully synthesized a highly efficient and stable single atom molybdenum (Mo) catalyst dispersed on nitrogen-doped carbon (Mo-NC-0.1). This catalyst was then utilized for the first time to activate PMS and degrade bisphenol A (BPA). The Mo-NC-0.1/PMS system demonstrated the ability to completely degrade BPA within just 20 min. Scavenging tests and density functional theory (DFT) calculations have demonstrated that the primary reactive oxygen species was singlet oxygen (1O2) produced by Mo-N4 sites. The self-cycling of Mo facilitated PMS activation and the transition from a free radical activation pathway to a non-radical pathway mediated by 1O2. Simultaneously, the nearby pyridinic N served as adsorption sites to immobilize BPA and PMS molecules. The exceptionally high catalytic activity of Mo-NC-0.1 derived from its unique Mo-N coordination, which markedly reduced the distance for 1O2 to migrate to the BPA molecules. The Mo-NC-0.1/PMS system effectively reduced the acute toxicity of BPA and exhibited excellent cycling stability with minimal leaching. This study presented a new catalyst with high selectivity for 1O2 generation and provided valuable insights for the application of single atom catalysts in PMS-based AOPs.

Detection and treatment of mono and polycyclic aromatic hydrocarbon pollutants in aqueous environments based on electrochemical technology: recent advances

Mono and polycyclic aromatic hydrocarbons are widely distributed and severely pollute the aqueous environment due to natural and human activities, particularly human activity. It is crucial to identify and address them in order to reduce the dangers and threats they pose to biological processes and ecosystems. In the fields of sensor detection and water treatment, electrochemistry plays a crucial role as a trustworthy and environmentally friendly technology. In order to accomplish trace detection while enhancing detection accuracy and precision, researchers have created and studied sensors using a range of materials based on electrochemical processes, and their results have demonstrated good performance. One cannot overlook the challenges associated with treating aromatic pollutants, including mono and polycyclic. Much work has been done and good progress has been achieved in order to address these challenges. This study discusses the mono and polycyclic aromatic hydrocarbon sensor detection and electrochemical treatment technologies for contaminants in the aqueous environment. Additionally mentioned are the sources, distribution, risks, hazards, and problems in the removal of pollutants. The obstacles to be overcome and the future development plans of the field are then suggested by summarizing and assessing the research findings of the researchers.

Biosurfactants-based mixed polycyclic aromatic hydrocarbon degradation: From microbial community structure toward non-targeted metabolomic profile determination

Biosurfactants-based bioremediation is considered an efficient technology to eliminate environmental pollutants including polycyclic aromatic hydrocarbons (PAHs). However, the precise role of rhamnolipids or lipopeptide-biosurfactants in mixed PAH dissipation, shaping microbial community structure, and influencing metabolomic profile remained unclear. In this study, results showed that the maximum PAH degradation was achieved in lipopeptide-assisted treatment (SPS), where the pyrene and phenanthrene were substantially degraded up to 74.28 % and 63.05 % respectively, as compared to rhamnolipids (SPR) and un-aided biosurfactants (SP). Furthermore, the high throughput sequencing analysis revealed a significant change in the PAH-degrading microbial community, with Proteobacteria being the predominant phylum (>98 %) followed by Bacteroidota and Firmicutes in all the treatments. Moreover, Pseudomonas and Pannonibacter were found as highly potent bacterial genera for mixed PAH degradation in SPR, SPS, and SP treatments, nevertheless, the abundance of the genus Pseudomonas was significantly enhanced (>97 %) in SPR treatment groups. On the other hand, the non-targeted metabolomic profile through UHPLC-MS/MS exhibited a remarkable change in the metabolites of amino acids, carbohydrates, and lipid metabolisms by the input of rhamnolipids or lipopeptide-biosurfactants whereas, the maximum intensities of metabolites (more than two-fold) were observed in SPR treatment. The findings of this study suggested that the aforementioned biosurfactants can play an indispensable role in mixed PAH degradation as well as seek to offer new insights into shifts in PAH-degrading microbial communities and their metabolic function, which can guide the development of more efficient and targeted strategies for complete removal of organic pollutants such as PAH from the contaminated environment.

Carbon nanotube supported cobalt nickel sulphide nano-catalyst for degradation of chloroquine phosphate with peroxymonosulphate

Carbon nanotubes supported cobalt nickel sulphide nanoparticles (nano-NiCo2S4@CNTs) were successfully prepared by a hydrothermal method as heterogeneous catalyst which can be used as an activator of peroxymonosulphate (PMS) for the degradation of chloroquine phosphate (CQP). Based on characterisation techniques, the prepared catalyst has excellent surface properties and structural stability. When different concentrations of CQP were treated with 0.2 g/L nano-NiCo2S4@CNTs and 1.0 mM PMS, the highest degradation rate could reach 99.86% after 30 min. Under the interference of pH, common anions and humic acid in the water environment, the reaction system can still achieve high degradation efficiency, showing excellent anti-interference ability and practical applicability. Furthermore, in the nano-NiCo2S4@CNTs/PMS system, according to the identification results of reactive oxygen species, the free radical and non-free radical pathway are responsible for the degradation of CQP, and the PMS mechanism activation was comprehensively proposed. Twelve intermediate products were detected in the degradation process, and the possible degradation pathways of CQP were proposed. This toxicity analysis demonstrates that the intermediate products formed during CQP degradation pose lower environmental risks compared to the original pollutant. In addition, after using the catalyst four cycles, the removal efficiency of CQP remains above 80%, indicating the excellent reusability and low metal ion leaching characteristics. Therefore, the nano-NiCo2S4@CNTs synthesised in this research has broad application prospects in activating PMS for wastewater treatment.

Spatiotemporal variability of PAHs and their derivatives in sediments of the Laizhou Bay in the eastern China: Occurrence, source, and ecological risk assessment

To understand the pollution status and risk levels in the Laizhou Bay, the spatiotemporal distribution, source, and ecological risk of 16 polycyclic aromatic hydrocarbons (PAHs) and 20 substituted PAHs (SPAHs) were studied in surface sediments in 2022. The findings indicated significant seasonal differences in the concentrations of PAHs and SPAHs under the influences of precipitation, temperature, light, and human activities, with higher storage levels in summer than in spring, and there was also a spatial distribution trend of estuary > coast > offshore. 2-Nitrofluorene (2-NF) and 2-methylnaphthalene (2-MN) were the most abundant components of SPAHs in both spring and summer, with levels of 21.44 ng/g and 17.89 ng/g in spring, 43.22 ng/g and 25.51 ng/g in summer, respectively. The results of the diagnostic ratio and principal component analysis - multiple linear regression identified sources of PAHs and SPAHs as combustion sources, including petroleum, coal, and biomass. The risk level of PAHs was low-to-moderate according to the toxicity equivalent quotient (TEQ) and risk quotient. A novel calculation method based on TEQ was proposed to assess the ecological risk of SPAHs, and the results indicated that the risk level of SPAHs was moderate-to-high.

Construction of cubic CaTiO3 perovskite modified by highly-dispersed cobalt for efficient catalytic degradation of psychoactive pharmaceuticals

Sulfate radical mediated advanced oxidation processes (SR-AOPs) have emerged as a promising alternative for emerging contaminants degradation. However, high activity and great stability are commonly difficult to juggle, and the structure-activity correlations are still ambiguous. This study constructed the cubic CaTiO3 perovskite modified by highly-dispersed cobalt for peroxymonosulfate (PMS) activation to improve the specific lattice plane exposure and reduce the metal leaching simultaneously. 98% of amitriptyline (AMT) degradation was achieved within 60 min under the condition of 200 mg/L Co0.1-CTO and 100 mg/L PMS. The results indicated that surface Co2+/Co3+ redox couple and lattice oxygen were responsible for PMS activation, and the evolution of ·OH, SO4·- and 1O2 were revealed. According to density functional theory (DFT) calculations, the highly-dispersed Co on cubic surface effectively captured PMS and promoted electron transfer for the generation of ·OH and SO4·-, while more oxygen atoms exposed on Co0.1-CTO(200) surface facilitated the generation of 1O2. Briefly, this study provides a novel strategy of catalyst synthesis in PMS activation for water treatment.

Oxygen vacancies-dominated reactive species generation from peroxymonosulfate activated by MoO3-x for pollutant degradation

Interface oxygen vacancies (OVs) are commonly used to improve the catalytic performance of activators in persulfate-based advanced oxidation processes, but the underlying mechanism was not fully explored. This work reports a facile heat treatment method to regulate OVs in MoO_3-x to elucidate the mechanism of peroxymonosulfate (PMS) activated by OVs to degrade 2,4,4-Trichlorobiphenyl (PCB28). Electron spin resonance, free radical quenching, X-ray photoelectron spectroscopy, and Raman spectroscopy confirmed that both reducing Mo species and OVs of MoO_3-x surface were responsible for PMS activation. Further experiments and Density Function Theory (DFT) calculation suggest that OVs in MoO_3-x induced the formation of superoxide radical (O₂^•-), and then O₂^•- was transformed into singlet oxygen (¹O₂) or mediated PMS activation to generate radicals, which contritbued to 70.2% of PCB28 degradation. The steady-state concentrations of free radical calculated with the kinetics model show that OVs were more favorable to mediate PMS to generate hydroxyl radicals (^•OH) under oxic conditions, while reducing Mo species would like to induce PMS to produce sulfate radicals (SO₄^•-). Overall, this study is dedicated to a new insight into the in-depth mechanism of PMS activation by OVs-rich catalysts and provides a novel strategy for reactive species regulation in PMS based oxidation process.

Waste self-heating bag derived iron-based composite with abundant oxygen vacancies for highly efficient Fenton-like degradation of micropollutants

In this study, iron-rich waste self-heating bag was reutilized as the raw material to prepare oxygen vacancies (OV) functionalized iron-based composite (iron oxide (Fe₃O₄)-carbon-vermiculite, viz. OV-ICV), which exhibited excellent performance in the Fenton-like degradation of micropollutants via peroxydisulfate (PDS) activation. Above 95% of 1.0 mg/L carbaryl (CB) was efficiently eliminated in the presence of 0.1 g/L of OV-ICV and 0.5 mmol/L of PDS over a wide pH range of 3-10 within 30 min. Besides, OV-ICV also showed acceptable adaptability, stability, and renewability. Imbedding OV into Fe₃O₄ structure significantly generated more active iron sites and localized electrons, promoted the charge transfer ability, and assisted the redox cycle of ≡Fe(III)/≡Fe(II) for PDS activation. Mechanism investigation demonstrated that superoxide radicals (O₂^•-) derived from the activation of molecular oxygen mediated the generation of H₂O₂, and both of them further enhanced the formation of more sulfate radicals (SO₄^•-) and hydroxyl radicals (^•OH), which led to the efficient degradation and mineralization of CB. Furthermore, the degradation pathways of CB were proposed based on the intermediates identification. This work lays a foundation for the rational reutilization of iron-containing wastes modified with defect engineering in heterogeneous Fenton-like catalysis for the remediation of micropollutants wastewater.

Selective activation of peroxymonosulfate govern by B-site metal in delafossite for efficient pollutants degradation: Pivotal role of d orbital electronic configuration

Radical and non-radical oxidation pathways have been universally validated in transition metals (TMs) oxides activated peroxymonosulfate (PMS) processes. However, achieving high efficiency and selectivity of PMS activation remains challenging due to the ambiguous tuning mechanism of TMs sites on PMS activation in thermodynamic scope. Herein, we demonstrated that the exclusive PMS oxidation pathways were regulated by d orbital electronic configuration of B-sites in delafossites (CuBO₂) for Orange I degradation (Co^III 3d⁶ for reactive oxygen species (ROSs) vs. Cr^III 3d³ for electron transfer pathway). The d orbital electronic configuration was identified to affect the orbital overlap extent between 3d of B-sites and O 2p of PMS, which induced B-sites offering different types of hybrid orbital to coordinate with O 2p of PMS, thereby forming the high-spin complex (CuCoO₂@PMS) or the low-spin complex (CuCrO₂@PMS), on which basis PMS was selectively dissociated to form ROSs or achieve electron transfer pathway. As indicated by thermodynamic analysis, a general rule was proposed that B-sites of less than half-filled 3d orbital tended to act as electron shuttle, i.e., Cr^III (3d³), Mn^III (3d⁴), interacting with PMS to execute an electron transfer pathway for degrading Orange I, while B-sites of between half-filled and full-filled 3d orbital preferred to be electron donator, i.e., Co^III (3d⁶), Fe^III (3d⁵), activating PMS to generate ROSs. These findings lay a foundation for the oriented design of TMs-based catalysts from the atomic level according to d orbital electronic configuration optimization, as so to facilitate the achievement of PMS-AOPs with highly selective and efficient remediation of contaminants in water purification practice.

Electrochemical activation of periodate with graphite electrodes for water decontamination: Excellent applicability and selective oxidation mechanism

Advanced oxidation technologies based on periodate (PI, IO₄^-) have garnered significant attention in water decontamination. In this work, we found that electrochemical activation using graphite electrodes (E-GP) can significantly accelerate the degradation of micropollutants by PI. The E-GP/PI system achieved almost complete removal of bisphenol A (BPA) within 15 min, exhibited unprecedented pH tolerance ranging from pH 3.0 to 9.0, and showed more than 90% BPA depletion after 20 h of continuous operation. Additionally, the E-GP/PI system can realize the stoichiometric transformation of PI into iodate, dramatically decreasing the formation of iodinated disinfection by-products. Mechanistic studies confirmed that singlet oxygen (¹O₂) is the primary reactive oxygen species in the E-GP/PI system. A comprehensive evaluation of the oxidation kinetics of ¹O₂ with 15 phenolic compounds revealed a dual descriptor model based on quantitative structure-activity relationship (QSAR) analysis. The model corroborates that pollutants exhibiting strong electron-donating capabilities and high pK_a values are more susceptible to attack by ¹O₂ through a proton transfer mechanism. The unique selectivity induced by ¹O₂ in the E-GP/PI system allows it to exhibit strong resistance to aqueous matrices. Thus, this study demonstrates a green system for the sustainable and effective elimination of pollutants, while providing mechanistic insights into the selective oxidation behaviour of ¹O₂.

Advanced oxidation processes for the removal of mono and polycyclic aromatic hydrocarbons - A review

Aromatic hydrocarbons (AHs) are toxic environmental contaminants presented in most of the environmental matrices. Advanced oxidation processes (AOPs) for the removal of AHs in the account of complete mineralization from various environmental matrices have been reviewed in this paper. An in-depth discussion on various AOPs for mono (BTEX) and polyaromatic hydrocarbons (PAHs) and their derivatives is presented. Most of the AOPs were effective in the removal of AHs from the aquatic environment. A comparative study on the degradation of various AHs revealed that the oxidation of the AHs is strongly dependent on the number of aromatic rings and the functional groups attached to the ring. The formation of halogenated and nitrated derivatives of AHs in the real contaminated water containing chloride, nitrite, and nitrate ions seems to be a challenge in using the AOPs in real systems. The phenolic compounds, quinone, alcohols, and aliphatic acids are the important byproducts formed during the oxidation of AHs, initiated by the attack of reactive oxygen species (ROS) on their electron-rich center. In conclusion, AOPs are the adaptable method for the removal of AHs from different environmental matrices. The persulfate-based AOPs were applied in the soil phase removal as an in situ chemical oxidation of AHs. Moreover, the combination of AOPs will be a conclusive solution to avoid or minimize unexpected or other toxic intermediate products and to obtain rapid oxidation of AHs.

Ce(Ⅲ) activates peroxymonosulfate for the degradation of substituted PAHs

Substituted polycyclic aromatic hydrocarbons (SPAHs) are being intensively investigated, considering their high toxicity. Additionally, the mechanism of the effect of substituents on the removal of SPAHs and the activation of Ce(III) ions on peroxymonosulfate (PMS) have not been explored. Here we evaluated the removal efficiency of SPAHs in the oxidation system constructed by Ce(Ⅲ) ions and PMS, with emphasized the effect of substituents on SPAHs degradation. Ce(Ⅲ) has high catalytic performance for PMS, and the degradation percentage of all pollutants was higher than 92%. The significantly negative correlation between the reaction rate constants of SPAHs and the highest occupied molecular orbital-the lowest unoccupied molecular orbital gap, confirms that substituents lead to the differences in the degradation of SPAHs. The generation of reactive oxygen species (SO₄^•-, ^•OH, and ¹O₂) is based on the electron transfer between Ce(Ⅲ) and PMS, and the contribution of ROS to substituted naphthalene varies due to the role of substituents. The Ce(Ⅳ)/Ce(Ⅲ) cycle accelerates the activation of PMS. Based on the transformation products and condensed Fukui function, the possible degradation pathways are inferred. In addition, inorganic anions and organic matter have little effect on the Ce(Ⅲ)/PMS system, which is a prerequisite for applying this system to real-world waste-water for SPAHs removal. This work demonstrates a new model of the degradation mechanism of SPAHs in the Ce(Ⅲ)/PMS system.

Effective peroxymonosulfate activation by natural molybdenite for enhanced atrazine degradation: Role of sulfur vacancy, degradation pathways and mechanism

In this study, natural molybdenite (MoS₂) was applied to activate peroxymonosulfate (PMS) for the removal of atrazine (ATZ) and its degradation mechanism was investigated. Molybdenite exhibits superior catalytic performance. The best condition for atrazine degradation efficiency (>99%) was obtained with molybdenite concentration of 0.4 g/L, PMS concentration of 0.1 mM, and ATZ concentration of 12 μM within 10 min under experimental conditions. Electron paramagnetic resonance (EPR) test and chemical probe test further proved that HO^• and SO₄^•- played important roles in the molybdenite/PMS system, and SO₄^•- was dominant. Meanwhile, Electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) tests showed that sulfur vacancies and edge sulfur played important roles in the system. Edge sulfur was conducive to Mo⁴⁺ exposure, while sulfur vacancy facilitated electron transfer and reduced Mo⁶⁺ back to Mo⁴⁺. Combined with DFT calculation, the role of sulfur in the degradation process was verified. Besides, five ATZ degradation pathways were proposed. Finally, the degradation ability of the molybdenite/PMS system for different pollutants and in actual water bodies was also explored. This work provided ideas for exploring the degradation of organic contaminants by natural minerals.

Peroxymonosulfate activation by black TiO2 nanotube arrays under solar light: Switching the activation mechanism and enhancing catalytic activity and stability

Black TiO₂ nanotube arrays (black TNAs) suffer from the low activity and deactivation for peroxymonosulfate (PMS) activation, which limit their application in the oxidative destruction of organic pollutants in water. Here, we report an efficient, environmentally benign, and cost-effective method to enhance the catalytic activity and prevent the deactivation of black TNAs in PMS activation by utilizing solar energy. Optical absorption and electrochemical analysis and density functional theory calculations demonstrated that abundant oxygen vacancies (estimated to be 26%) on the black TNAs surface markedly improved solar light absorption and electrical conductivity and played a critical role as a catalytic active site for PMS activation. As a result, the solar light-irradiated black TNAs/PMS system exhibited the higher phenol degradation rate (k = 0.0488 min^-1) and total organic carbon (TOC) removal efficiency (~70%) compared to other TNAs systems. These results were ascribed to the switching of the reaction mechanism from non-radical mechanism to radical-involved. Black TNAs oxidized organic pollutants by mediating electron transfer from organics to PMS in the dark (i.e., a non-radical pathway). On the other hand, PMS activation under solar light irradiation involved the production of highly reactive sulfate and hydroxyl radicals (i.e., radical pathway), markedly improving the degradation and mineralization of organics. Additionally, the solar light-irradiated black TNAs showed relative pH-independence for PMS activation and durable catalytic performance without the loss of activity during the repetitive reaction cycles.

Metal-free carbocatalysts derived from macroalga biomass (Ulva lactuca) for the activation of peroxymonosulfate toward the remediation of polycyclic aromatic hydrocarbons laden marine sediments and its impacts on microbial community

Potential toxic chemicals, specifically, polycyclic aromatic hydrocarbons (PAHs), are major sediment contaminants. Herein, green seaweed (Ulva lactuca) was used as a feedstock and pyrolyzed at temperature in the range between 300 and 900 °C. The metal-free carbocatalyst (GSBC) for peroxymonosulfate (PMS) activation to degrade PAHs contaminated sediments was studied. The effects of GSBC‒PMS treatment on microbial community abundance was studied as well. The pyrolysis temperature of GSBC preparation affected the PMS activation performance. Results show that GSBC700 exhibited remarkable catalytic characteristics in PAHs degradation by effective activation of PMS. The results also demonstrated that the sulfate radical-carbon-driven advanced oxidation processes (SR-CAOP) reaction achieved 87% and apparent rate constant (k_obs) of 6.3 × 10^-2 h^-1 of total PAHs degradation in 24 h at 3.3 g/L of GSBC, PMS dose of 1 × 10^-4 M, and pH 3.0. The degradation of 2-, 3-, 4-, 5-, and 6-ring PAHs was 84, 83, 83, 80, and 89%, respectively. The synergetic effect established between GSBC and PMS enhanced the formation of ROSs, namely, SO₄^-, HO, and ¹O₂, which were major species contributing to PAHs degradation. The synergistic effect of π‒π stacking structure and graphitization of GSBC formed electron shuttle, which contributed to PAHs degradation performance. Microbial community structure analyses in the GSBC‒PMS treated sediments showed that the relative abundance of Lactobacillus_rhamnosus species, most of which belonged to the Lactobacillus genus and Firmicutes phylum, which aided in continuing PAHs biodegradation post GSBC‒PMS treatment. Therefore, GSBC can be a promising carbocatalyst produced via biomass-to-biochar conversion as biowaste-to-energy source used in the SR-CAOP-mediated process for sediment remediation.

Construction of durable superhydrophilic activated carbon fibers based material for highly-efficient oil/water separation and aqueous contaminants degradation

Developing filtering materials with high permeation flux and contaminant removal rate is of great importance for oily wastewater remediation. Herein, a robust three-dimensional (3D) activated carbon fibers (ACFs) based composite with uniformly grown layered double hydroxide (LDH) on the surface was successfully constructed through a feasible hydrothermal strategy. The LDH with a high surface energy and vertically aligned structure could provide superhydrophilicity to ACFs. Systematic investigation confirmed that the 3D material could overcome the size mismatch between the ACFs macropores and tiny emulsified droplets through the combination of size-sieving filtration on the surface and oil droplet coalescence in the fiber network. This process efficiently separated the intractable surfactant-stabilized oil-in-water emulsions with high permeation flux (up to 4.16 × 10⁶ L m^-2 h^-1 bar^-1). Notably, the LDH also had well-dispersed catalytic active sites, which could initiate advanced oxidation processes (AOPs) to efficiently eliminate various types of water-soluble organic pollutants (e.g., pharmaceuticals, phenolic compounds and organic dyes). The resulting modified ACFs exhibited exceptional removal rates for both oil and organic pollutants in the complex sewage during the continuous filtration process. These versatile abilities integrated with the facile preparation method reported herein provide outstanding prospects for the large-scale treatment of oily wastewater.

A novel chitosan-urea encapsulated material for persulfate slow-release to degrade organic pollutants

A novel eco-friendly material (CS-U@PS) for persulfate slow-release to effectively degrade organic pollutants (methyl orange and pyrene) was synthesized using chitosan and urea as the encapsulated framework materials via an emulsion cross-linking method for the first time. The obtained CS-U@PS exhibits spherical shapes with a uniform size of approximately 2-3 µm according to the particle-size distribution and SEM image results. The slow-release mechanism was proposed through a kinetics model study and the Ritger-Peppas model fit well (r² = 0.9699) to indicate that the slow-release process is non-Fickian diffusion. The influences of urea and PS dosages and oxidative conditions on methyl orange degradation were studied, and all the results suggested that urea played an important role in PS slow-release and can also catalyze the activation of PS by iron to further produce radicals and improve the removal efficiency of pollutants. A pyrene removal rate of 90.53% was achieved in aqueous solutions and an above 80% removal rate was obtained in weakly acidic or neutral soil environments by CS-U@PS activated by Fe²⁺ with citric acid as the chelating agent. Therefore, the fabricated slow-release oxidation materials exhibit application potential for the remediation of organic polluted groundwater and soil.

Enhanced PAHs-contaminated site soils remediation by mixed persulfate and calcium peroxide

Polycyclic aromatic hydrocarbons (PAHs) remain in the site soils after relocated coking plants and oil refineries pose huge constraints to the subsequent land utilization. However, single persulfate (PS) or calcium peroxide (CP) remediation strategies can only inefficiently oxidize some PAHs in soil. This work sought to optimize PS/CP oxidation remediation strategy and verify its practical application effect in soil samples spiked with PAHs. The results showed that the mixed PS/CP oxidation remediation was better than the single oxidants strategies; it had high remediation performance in different particles and pollution loads of PAHs-contaminated soils. Simultaneously, reactive radicals (SO₄·^- and ·OH) were detected, and one side-product (CaSO₄) was characterized. This work optimized the mixed PS/CP system (0.3 mol/L PS, and 8 g/kg CP, together with 0.18 mol/L Fe²⁺ and 0.11 mol/L C₂O₄^2-), and the corresponding Total-PAHs removal rate was 85.41%. Compared to the cost based on benzopyrene (BaP) removal, the study provided a cost-effective mixed PS/CP oxidation remediation technique (1.22 $/ton), widely applicable in soils polluted with various organic contaminants represented such as PAHs.

Formation of environmentally persistent free radicals from photodegradation of triclosan by metal oxides/silica suspensions and particles

Metal oxides play an essential role in the photocatalysis of contaminants and substantially increase in the environment by the engineering production. However, whether emerging contaminants will be produced during photocatalysis of contaminants remains unclear. Here, triclosan (TCS) photodegradation in metal oxides/silica suspensions and particles, simulated as the states of metal oxides in water and soil environments, were studied. The photodegradation results confirmed that metal oxides exhibited a double-effect. They promoted TCS photodegradation by generating reactive oxidizing species (ROS) in metal oxides/silica suspensions and inhibited the photodegradation by competing with TCS for irradiation in metal oxides/silica particles. In this study, the critical discovery was the formation of emerging contaminants, environmentally persistent free radicals (EPFRs), and EPFRs yields were promoted by metal oxides (Al₂O₃, ZnO, TiO₂). They were more stable in metal oxides than silica, and the half-lives ranged from 6.7 h to 90.9 d. Although CuO did not increase EPFRs yields compared to silica, the half-lives of EPFRs were also longer. In addition, this study found that EPFRs yields were dependent on the metal oxides concentrations. Our results provided a new insight into the negative environmental impacts of metal oxides and improved our understanding of the formation and fate of EPFRs by metal oxides in soil and aquatic environments.

Photosensitized Transformation of Peroxymonosulfate in Dissolved Organic Matter Solutions under Simulated Solar Irradiation

Sulfate radical (SO₄^•-)-mediated advanced oxidation processes via peroxymonosulfate (PMS) activation have been extensively investigated. However, the phototransformation of PMS in sunlit dissolved organic matter (DOM) solution has not been previously examined. For the first time, the photosensitized transformation of PMS in DOM-enriched solutions under simulated solar irradiation was observed. The generation of reactive species, including ¹O₂, SO₄^•-, and ^•OH, was confirmed by electron paramagnetic resonance and quantified by chemical probes. SO₄^•- was the primary reactive species generated via the reaction of excited triplet DOM (³DOM*) with PMS. ³DOM* acted as a reactive reductant and was quickly oxidized by PMS, with an estimated reaction rate constant of (4.09 ± 0.21) × 10⁸ M^-1 s^-1. Compared to ³DOM*, one-electron-reducing DOM (DOM^•-) was a minor contributor to the photosensitized transformation of PMS, and the contribution of DOM^•- relied on the phenolic constituents. In addition, a series of different types of DOM, including terrestrial DOM, autochthonous DOM, and effluent organic matter and its fractions, were employed to examine the photosensitized transformation kinetics of PMS. Overall, the photosensitized transformation of PMS by irradiated DOM could be a useful and economical approach to generate SO₄^•- under environmentally relevant conditions.

Mo2C/C catalyst as efficient peroxymonosulfate activator for carbamazepine degradation

Compared with generally reported Mo⁴⁺/Mo⁶⁺ redox cycle, the exposed Mo²⁺ active sites of Mo-based materials may have a superior potential to effectively activate PMS. However, Mo²⁺-involved materials as efficient catalysts in sulfate radical-based advanced oxidation processes (SR-AOPs) has rarely been researched. In this work, a spherical Mo₂C-loaded carbon material, Mo₂C/C, was prepared for the first time by hydrothermal-calcination method directly used as peroxymonosulfate (PMS) activator towards carbamazepine (CBZ) degradation. The results showed that the Mo₂C/C could effectively remove nearly 100% CBZ (5 mg·L^-1) in the presence of 0.75 mM PMS within 75 min under the optimal conditions. It was attributed to the reductive Mo²⁺, as active sites, benefits to absorb PMS on the surface to trigger electron transmission, and the defective carbon structures accelerate the activation of PMS. Consequently, the efficient Mo²⁺/Mo⁴⁺/Mo⁶⁺ electron transfer was achieved, resulting in excellent catalysis. A series of reactive species including SO₄^-, OH and ¹O₂ species participated in CBZ oxidation degradation. Derived from the superior stability and reusability of Mo₂C/C, the removal rate of CBZ still maintained above 80% even after five consecutive cycles, which is expected to be applied in the wastewater treatment including pharmaceuticals in the future.