Efficient diterpene production in yeast by engineering Erg20p into a geranylgeranyl diphosphate synthase

Metabolic Engineering of Escherichia coli for Enhanced Production of Cembratrien-ols via Precursor Supply Optimization and Membrane Engineering

Cembratrien-ols (CBT-ols) are diterpenoid compounds derived from Nicotiana plants, exhibit significant insecticidal activity, and have attracted considerable attention for the development of sustainable biopesticides. In this study, an efficient CBT-ols biosynthesis strain was constructed by integrating an artificial isopentenol utilization pathway into Escherichia coli. Multiple endogenous pyrophosphatase genes were systematically knocked out to enhance precursor supply, increasing CBT-ol production to 211.6 ± 5.74 mg/L. To further promote CBT-ol accumulation, cell membrane engineering was employed to expand membrane storage capacity, resulting in a yield of 475.6 ± 13.73 mg/L. Through fermentation optimization via continuous feeding, the engineered strain produced a final yield of 2.87 g/L in a 5 L bioreactor, with a substrate conversion rate of 44.3%, which represents the highest reported yield to date. These findings underscore the substantial benefits of the isopentenol utilization pathway in optimizing synthesis processes, thereby establishing a more robust foundation for the production of isoprenoid compounds.

Three cytochrome P450 enzymes consecutively catalyze the biosynthesis of furanoclerodane precursors in Salvia species

Salvia species native to the Americas are rich in valuable bioactive furanoclerodanes like the psychoactive salvinorin A found in Salvia divinorum, which is used in the treatment of opioid addiction. However, relatively little is known about their biosynthesis. To address this, we investigated the biosynthesis of salviarin, the most abundant furanoclerodane structure in the ornamental sage Salvia splendens. Using a self-organizing map and mutual rank analysis of RNA-seq co-expression data, we identified three cytochrome P450 enzymes responsible for the consecutive conversion of kolavenol into the salviarin precursors: annonene, hardwickiic acid, and hautriwaic acid. Annonene and hardwickiic acid have been proposed as intermediates in the biosynthesis of salvinorin A, and we therefore tested for a common evolutionary origin of the furanoclerodane pathway in these Salvia species by searching for homologous genes in available data for S. divinorum. The enzymes encoded by orthologous genes from S. divinorum displayed kolavenol synthase, annonene synthase, and hardwickiic acid synthase activity, respectively, supporting the view that these are intermediate steps in the biosynthesis of salvinorin A. We further investigated the origin of annonene synthase and the role of gene duplication in the evolution of this specific activity. Our work shows how S. splendens can serve as a model species for the study of furanoclerodane biosynthesis in Salvia species, contributes to understanding the evolution of specialized metabolism in plants, and provides new tools for the production of salvinorin A in biotechnological chassis.

Bacterial biosynthesis of abietane-type diterpene ferruginol from glucose

BACKGROUND

Microbial supply of plant extracts is a promising biomanufacturing strategy that requires engineering of metabolic pathways and enzymes. This study presents the engineering of Corynebacterium glutamicum for heterologous production of diterpenes miltiradiene and ferruginol.

RESULTS

Through targeted metabolic pathway modifications, including inactivation of pyruvate carboxylase and phytoene synthase, the HL01 strain was optimized to enhance pyruvate and geranylgeranyl pyrophosphate (GGPP) pools. Overexpression of key MEP pathway enzymes (Dxs and Idi) and implementation of three GGPP synthase modules further boosted diterpene synthesis. Then, combining those modules with diterpene synthase (DiTPS) and intact P450 reductase modules (CYP76AH1 and CPR1) enabled production of miltiradiene (ferruginol equivalent) at 237.46 ± 34.8 mg/L and ferruginol at 107.34 ± 1.2 mg/L under constant glucose feeding, respectively.

CONCLUSIONS

Modular gene expression for heterologous metabolic pathway can be optimized for bacterial biosynthesis. This is the first demonstration of ferruginol production in bacteria. These findings pave the way for further optimization of diterpene biosynthesis through pathway engineering and module integration in bacterial systems.

Systematic biotechnological production of isoprenoid analogs with bespoke carbon skeletons

Natural products are widely used as pharmaceuticals, flavors, fragrances, and cosmetic ingredients. Synthesizing and evaluating analogs of natural products can considerably expand their applications. However, the chemical synthesis of analogs of natural products is severely hampered by their highly complex structures. This is particularly evident in isoprenoids, the largest class of natural products. Here, we develop a yeast cell-based biocatalytic method that enables the systematic biotechnological production of analogs of different classes of isoprenoids (including monoterpenoids, sesquiterpenoids, triterpenoids, and cannabinoids) with additional carbons in their skeletons. We demonstrate the applicability of this approach through two proof-of-concept studies: the biosynthesis of the highly valued aroma ingredient ethyllinalool, and the production of cannabinoid analogs with improved cannabinoid receptor agonism. This method is simple, readily adaptable to any cell factory, and enables the tailored expansion of the isoprenoid chemical space to identify molecules with improved properties and the biotechnological production of valuable compounds.

Construction of isopentenol utilization pathway and artificial multifunctional enzyme for miltiradiene synthesis in Saccharomyces cerevisiae

Miltiradiene serves as a pivotal precursor for the synthesis of numerous abietane-type diterpenes with important pharmacological activities. The endogenous mevalonate (MVA) pathway is tightly regulated in Saccharomyces cerevisiae, which limits the availability of precursors for the heterologous production of miltiradiene. In this study, the orthogonal isopentenol utilization pathway (IUP) was constructed and investigated for its adaptability with mitochondria and peroxisomes in S. cerevisiae for the synthesis of miltiradiene. Compartments combinatorial engineering was used to enhance precursor supply and miltiradiene synthesis, thereby elevating the production of miltiradiene to 146.1 mg/L in S. cerevisiae. Furthermore, an artificial multifunctional enzyme, tSmCPS-tSmKSL-PvPT, was constructed by mimicking the natural multifunctional enzyme to enhance the biosynthesis of miltiradiene in S. cerevisiae strain PCM-MT1, which is capable of producing 414.4 mg/L miltiradiene. Finally, the titer of miltiradiene was increased to 1.02 g/L by fed-batch fermentation in a 5 L bioreactor. This study broadens the application of the IUP in S. cerevisiae by integrating compartmentalization and artificial multifunctional enzymes for the synthesis of diterpenes.

Dynamic regulation and enhancement of synthetic network for efficient biosynthesis of monoterpenoid α-pinene in yeast cell factory

Pinene is a plant volatile monoterpenoid which is used in the fragrance, pesticide, and biofuel industries. Although α-pinene has been synthesized in microbial cell factories, the low synthesis efficiency has thus far limited its production. In this study, the cell growth and α-pinene production of the engineered yeast were decoupled by a dynamic regulation strategy, resulting in a 101.1-fold increase in α-pinene production compared to the control. By enhancing the mevalonate pathway and expanding the cytosolic acetyl-CoA pool, α-pinene production was further increased. Overexpression of the transporter Sge1 resulted in a redistribution of global gene transcription, leading to an increased flux of α-pinene synthesis. By optimizing the aeration flow rate in 3-L bioreactors, the α-pinene production reached 1.8 g/L, which is the highest reported α-pinene production in cell factories. Our research provides insights and fundamentals for the efficient synthesis of monoterpenoids in microbial cell factories.

Engineering Saccharomyces cerevisiae for medical applications

BACKGROUND

During the last decades, the advancements in synthetic biology opened the doors for a profusion of cost-effective, fast, and ecologically friendly medical applications priorly unimaginable. Following the trend, the genetic engineering of the baker's yeast, Saccharomyces cerevisiae, propelled its status from an instrumental ally in the food industry to a therapy and prophylaxis aid.

MAIN TEXT

In this review, we scrutinize the main applications of engineered S. cerevisiae in the medical field focusing on its use as a cell factory for pharmaceuticals and vaccines, a biosensor for diagnostic and biomimetic assays, and as a live biotherapeutic product for the smart in situ treatment of intestinal ailments. An extensive view of these fields' academic and commercial developments as well as main hindrances is presented.

CONCLUSION

Although the field still faces challenges, the development of yeast-based medical applications is often considered a success story. The rapid advances in synthetic biology strongly support the case for a future where engineered yeasts play an important role in medicine.

Screening of ent-copalyl diphosphate synthase and metabolic engineering to achieve de novo biosynthesis of ent-copalol in Saccharomyces cerevisiae

The diterpene ent-copalol is an important precursor to the synthesis of andrographolide and is found only in green chiretta (Andrographis paniculata). De novo biosynthesis of ent-copalol has not been reported, because the catalytic activity of ent-copalyl diphosphate synthase (CPS) is very low in microorganisms. In order to achieve the biosynthesis of ent-copalol, Saccharomyces cerevisiae was selected as the chassis strain, because its endogenous mevalonate pathway and dephosphorylases could provide natural promotion for the synthesis of ent-copalol. The strain capable of synthesizing diterpene geranylgeranyl pyrophosphate was constructed by strengthening the mevalonate pathway genes and weakening the competing pathway. Five full-length ApCPSs were screened by transcriptome sequencing of A. paniculata and ApCPS2 had the best activity and produced ent-CPP exclusively. The peak area of ent-copalol was increased after the ApCPS2 saturation mutation and its configuration was determined by NMR and ESI-MS detection. By appropriately optimizing acetyl-CoA supply and fusion-expressing key enzymes, 35.6 mg/L ent-copalol was generated. In this study, de novo biosynthesis and identification of ent-copalol were achieved and the highest titer ever reported. It provides a platform strain for the further pathway analysis of andrographolide and derivatives and provides a reference for the synthesis of other pharmaceutical intermediates.

Geranylgeraniol: Bio-based platform for teprenone, menaquinone-4, and α-tocotrienol synthesis

By utilizing the conformational selectivity of biosynthesis and the flexibility of chemical synthesis, researchers have formulated metabolic engineering-based semi-synthetic approaches that initiate with the final product's structure and identify key biosynthesis intermediates. Nonetheless, these tailored semi-synthetic routes focused on end-products, neglecting the possibility of biobased intermediates as a platform for derivatization. To address this challenge, this studyproposed a novel strategy resembling chemosynthesis-style divergent exploration to amplify the significance of biobased intermediates, in the case of geranylgeraniol (GGOH). Using the novel bifunctional terpene synthase PTTC066 and systematic metabolic engineering modifications, the engineered yeast straindemonstrated high GGOH production levels (3.32 g/L, 0.039 g/L/h). This platformenabled the semi-synthesis of various pharmaceuticals, including the anti-ulcer drug teprenone, the osteoporosis treatment drug menaquinone-4, and introduced a novel route for synthesizingα-tocotrienol. This study offers a fresh outlook on semi-synthetic approaches, opening avenues for improvements, substitutions, and innovations in industrial production processes.

Screening and modification of (+)-germacrene A synthase for the production of the anti-tumor drug (-)-β-elemene in engineered Saccharomyces cerevisiae

(-)-β-Elemene is a primary bioactive compound derived from Curcuma wenyujin and has been widely utilized as an anti-tumor agent for various types of cancer. Due to the inefficiency of plant extraction methods for β-elemene, significant efforts have been directed toward the heterogeneous biosynthesis of β-elemene using microbial cell factories. However, there has been less emphasis on the stereochemical configuration of germacrene A and its rearranged product, β-elemene. In this study, we constructed a yeast cell factory to produce (-)-β-elemene by optimizing the mevalonate pathway and screening for germacrene A synthases (GASs) from both plant and microbial sources. Notably, we discovered that the rearranged products of GASs exhibited different conformations, and only (+)-germacrene A produced by plant-derived GASs could rearrange to form (-)-β-elemene. Building on this discovery, we further investigated the catalytic mechanisms of GASs and developed an efficient catalytic gene module for generating (+)-germacrene A. Ultimately, the engineered yeast produced 1152 mg/L of (-)-β-elemene, marking the highest titer reported in yeast to date. Overall, this work highlights the differences in the stereoconformations of catalytic products between plant- and microbial-derived germacrene A synthases and establishes a foundation for the green and efficient production of β-elemene with a specific stereochemical configuration.

Engineering the microenvironment of P450s to enhance the production of diterpenoids in Saccharomyces cerevisiae

Cytochrome P450 enzymes play a crucial role as catalysts in the biosynthesis of numerous plant natural products (PNPs). Enhancing the catalytic activity of P450s in host microorganisms is essential for the efficient production of PNPs through synthetic biology. In this study, we engineered Saccharomyces cerevisiae to optimize the microenvironment for boosting the activities of P450s, including coexpression with the redox partner genes, enhancing NADPH supply, expanding the endoplasmic reticulum (ER), strengthening heme biosynthesis, and regulating iron uptake. This created a platform for the efficient production 11,20-dihydroxyferruginol, a key intermediate of the bioactive compound tanshinones. The yield was enhanced by 42.1-fold through 24 effective genetic edits. The optimized strain produced up to 67.69 ± 1.33 mg/L 11,20-dihydroxyferruginol in shake flasks. Our work represents a promising advancement toward constructing yeast cell factories containing P450s and paves the way for microbial biosynthesis of tanshinones in the future.

Combinatorial metabolic engineering of Bacillus subtilis for menaquinone-7 biosynthesis

Menaquinone-7 (MK-7), a form of vitamin K2, supports bone health and prevents arterial calcification. Microbial fermentation for MK-7 production has attracted widespread attention because of its low cost and short production cycles. However, insufficient substrate supply, unbalanced precursor synthesis, and low catalytic efficiency of key enzymes severely limited the efficiency of MK-7 synthesis. In this study, utilizing Bacillus subtilis BSAT01 (with an initial MK-7 titer of 231.0 mg/L) obtained in our previous study, the glycerol metabolism pathway was first enhanced to increase the 3-deoxy-arabino-heptulonate 7-phosphate (DHAP) supply, which led to an increase in MK-7 titer to 259.7 mg/L. Subsequently, a combination of knockout strategies predicted by the genome-scale metabolic model etiBsu1209 was employed to optimize the central carbon metabolism pathway, and the resulting strain showed an increase in MK-7 production from 259.7 to 318.3 mg/L. Finally, model predictions revealed the methylerythritol phosphate pathway as the major restriction pathway, and the pathway flux was increased by heterologous introduction (Introduction of Dxs derived from Escherichia coli) and fusion expression (End-to-end fusion of two enzymes by a linker peptide), resulting in a strain with a titer of 451.0 mg/L in a shake flask and 474.0 mg/L in a 50-L bioreactor. This study achieved efficient MK-7 synthesis in B. subtilis, laying the foundation for large-scale MK-7 bioproduction.

Engineered Microbial Consortium for De Novo Production of Sclareolide

Sclareolide, a natural product with bioactive and fragrant properties, is not only utilized in the food, healthcare, and cosmetics industries but also serves as a precursor for the production of ambroxide and some bioactive compounds. Currently, there are three primary methods for producing sclareolide: direct extraction from plants, chemical synthesis using sclareol as a precursor, and the biotransformation of sclareol. Here, we established a platform for producing sclareolide through a modular coculture system with Saccharomyces cerevisiae and Cryptococcus albidus ATCC 20918. S. cerevisiae was engineered for de novo sclareol biosynthesis from glucose, while C. albidus enabled the production of sclareolide via sclareol biotransformation. To enhance the supply of sclareol, a recombinant yeast strain was constructed through metabolic engineering to produce 536.2 mg/L of sclareol. Further improvement of the coculture system for sclareolide production was achieved by incorporating Triton X-100 facilitated intermediate permeability, inoculation proportion adjustment, and culture temperature optimization. These refinements culminated in a sclareolide yield of 626.3 mg/L. This study presents a novel streamlined and efficient approach for sclareolide preparation, showcasing the potential of the microbial consortium in sustainable bioproduction.

Chemical and transcriptomic analyses of leaf trichomes from Cistus creticus subsp. creticus reveal the biosynthetic pathways of certain labdane-type diterpenoids and their acetylated forms

Labdane-related diterpenoids (LRDs), a subgroup of terpenoids, exhibit structural diversity and significant commercial and pharmacological potential. LRDs share the characteristic decalin-labdanic core structure that derives from the cycloisomerization of geranylgeranyl diphosphate (GGPP). Labdanes derive their name from the oleoresin known as 'Labdanum', 'Ladano', or 'Aladano', used since ancient Greek times. Acetylated labdanes, rarely identified in plants, are associated with enhanced biological activities. Chemical analysis of Cistus creticus subsp. creticus revealed labda-7,13(E)-dien-15-yl acetate and labda-7,13(E)-dien-15-ol as major constituents. In addition, novel labdanes such as cis-abienol, neoabienol, ent-copalol, and one as yet unidentified labdane-type diterpenoid were detected for the first time. These compounds exhibit developmental regulation, with higher accumulation observed in young leaves. Using RNA-sequencing (RNA-seq) analysis of young leaf trichomes, it was possible to identify, clone, and eventually functionally characterize labdane-type diterpenoid synthase (diTPS) genes, encoding proteins responsible for the production of labda-7,13(E)-dien-15-yl diphosphate (endo-7,13-CPP), labda-7,13(E)-dien-15-yl acetate, and labda-13(E)-ene-8α-ol-15-yl acetate. Moreover, the reconstitution of labda-7,13(E)-dien-15-yl acetate and labda-13(E)-ene-8α-ol-15-yl acetate production in yeast is presented. Finally, the accumulation of LRDs in different plant tissues showed a correlation with the expression profiles of the corresponding genes.

Strategies, Achievements, and Potential Challenges of Plant and Microbial Chassis in the Biosynthesis of Plant Secondary Metabolites

Diverse secondary metabolites in plants, with their rich biological activities, have long been important sources for human medicine, food additives, pesticides, etc. However, the large-scale cultivation of host plants consumes land resources and is susceptible to pest and disease problems. Additionally, the multi-step and demanding nature of chemical synthesis adds to production costs, limiting their widespread application. In vitro cultivation and the metabolic engineering of plants have significantly enhanced the synthesis of secondary metabolites with successful industrial production cases. As synthetic biology advances, more research is focusing on heterologous synthesis using microorganisms. This review provides a comprehensive comparison between these two chassis, evaluating their performance in the synthesis of various types of secondary metabolites from the perspectives of yield and strategies. It also discusses the challenges they face and offers insights into future efforts and directions.

ApCPS2 contributes to medicinal diterpenoid biosynthesis and defense against insect herbivore in Andrographis paniculata

Kalmegh (Andrographis paniculata) spatiotemporally produces medicinally-important ent-labdane-related diterpenoids (ent-LRDs); andrographolide (AD), 14-deoxy-11,12-didehydroandrographolide (DDAD), neoandrographolide (NAD). ApCPS1 and ApCPS2, the ent-copalyl pyrophosphate (ent-CPP)-producing class II diterpene synthases (diTPSs) were identified, but their contributions to ent-CPP precursor supply for ent-LRD biosynthesis were not well understood. Here, we characterized ApCPS4, an additional ent-CPP-forming diTPS. Further, we elucidated in planta function of the ent-CPP-producing diTPSs (ApCPS1,2,4) by integrating transcript-metabolite co-profiles, biochemical analysis and gene functional characterization. ApCPS1,2,4 localized to the plastids, where diterpenoid biosynthesis occurs in plants, but ApCPS1,2,4 transcript expression patterns and ent-LRD contents revealed a strong correlation of ApCPS2 expression and ent-LRD accumulation in kalmegh. ApCPS1,2,4 upstream sequences differentially activated β-glucuronidase (GUS) in Arabidopsis and transiently-transformed kalmegh. Similar to higher expression of ApCPS1 in kalmegh stem, ApCPS1 upstream sequence activated GUS in stem/hypocotyl of Arabidopsis and kalmegh. However, ApCPS2,4 upstream sequences weakly activated GUS expression in Arabidopsis, which was not well correlated with ApCPS2,4 transcript expression in kalmegh tissues. Whereas, ApCPS2,4 upstream sequences could activate GUS expression at a considerable level in kalmegh leaf and roots/calyx, respectively, suggesting the involvement of transcriptional regulator(s) of ApCPS2,4 that might participate in kalmegh-specific diterpenoid pathway. Interestingly, ApCPS2-silenced kalmegh showed a drastic reduction in AD, DDAD and NAD contents and compromised defense against insect herbivore Spodoptera litura. However, ent-LRD contents and herbivore defense in ApCPS1 or ApCPS4-silenced plants remained largely unaltered. Overall, these results suggested an important role of ApCPS2 in producing ent-CPP for medicinal ent-LRD biosynthesis and defense against insect herbivore.

Strategies for the efficient biosynthesis of β-carotene through microbial fermentation

β-Carotene is an orange fat-soluble compound, which has been widely used in fields such as food, medicine and cosmetics owing to its anticancer, antioxidant and cardiovascular disease prevention properties. Currently, natural β-carotene is mainly extracted from plants and algae, which cannot meet the growing market demand, while chemical synthesis of β-carotene cannot satisfy the pursuit for natural products of consumers. The β-carotene production through microbial fermentation has become a promising alternative owing to its high efficiency and environmental friendliness. With the rapid development of synthetic biology and in-depth study on the synthesis pathway of β-carotene, microbial fermentation has shown promising applications in the β-carotene synthesis. Accordingly, this review aims to summarize the research progress and strategies of natural carotenoid producing strain and metabolic engineering strategies in the heterologous synthesis of β-carotene by engineered microorganisms. Moreover, it also summarizes the adoption of inexpensive carbon sources to synthesize β-carotene as well as proposes new strategies that can further improve the β-carotene production.

Heterologous Biosynthesis of Kauralexin A1 in Saccharomyces cerevisiae through Metabolic and Enzyme Engineering

Kauralexin A1 (KA1) is a key intermediate of the kauralexin A series metabolites of maize phytoalexins. However, their application is severely limited by their low abundance in maize. In this study, an efficient biosynthetic pathway was constructed to produce KA1 in Saccharomyces cerevisiae. Also, metabolic and enzyme engineering strategies were applied to construct the high-titer strains, such as chassis modification, screening synthases, the colocalization of enzymes, and multiple genomic integrations. First, the KA1 precursor ent-kaurene was synthesized using the efficient diterpene synthase GfCPS/KS from Fusarium fujikuroi, and optimized to reach 244.36 mg/L in shake flasks, which displayed a 200-fold increase compared to the initial strain. Then, the KA1 was produced under the catalysis of ZmCYP71Z18 from Zea mays and SmCPR1 from Salvia miltiorrhiza, and the titer was further improved by integrating the fusion protein into the genome. Finally, an ent-kaurene titer of 763.23 mg/L and a KA1 titer of 42.22 mg/L were achieved through a single-stage fed-batch fermentation in a 5 L bioreactor. This is the first report of the heterologous biosynthesis of maize diterpene phytoalexins in S. cerevisiae, which lays a foundation for further pathway reconstruction and biosynthesis of the kauralexin A series maize phytoalexins.

Two-Phase Fermentation Systems for Microbial Production of Plant-Derived Terpenes

Microbial cell factories, renowned for their economic and environmental benefits, have emerged as a key trend in academic and industrial areas, particularly in the fermentation of natural compounds. Among these, plant-derived terpenes stand out as a significant class of bioactive natural products. The large-scale production of such terpenes, exemplified by artemisinic acid-a crucial precursor to artemisinin-is now feasible through microbial cell factories. In the fermentation of terpenes, two-phase fermentation technology has been widely applied due to its unique advantages. It facilitates in situ product extraction or adsorption, effectively mitigating the detrimental impact of product accumulation on microbial cells, thereby significantly bolstering the efficiency of microbial production of plant-derived terpenes. This paper reviews the latest developments in two-phase fermentation system applications, focusing on microbial fermentation of plant-derived terpenes. It also discusses the mechanisms influencing microbial biosynthesis of terpenes. Moreover, we introduce some new two-phase fermentation techniques, currently unexplored in terpene fermentation, with the aim of providing more thoughts and explorations on the future applications of two-phase fermentation technology. Lastly, we discuss several challenges in the industrial application of two-phase fermentation systems, especially in downstream processing.

Metabolic engineering of Saccharomyces cerevisiae for the synthesis of valuable chemicals

In the twenty first century, biotechnology offers great opportunities and solutions to climate change mitigation, energy and food security and resource efficiency. The use of metabolic engineering to modify microorganisms for producing industrially significant chemicals is developing and becoming a trend. As a famous, generally recognized as a safe (GRAS) model microorganism, Saccharomyces cerevisiae is widely used due to its excellent operational convenience and high fermentation efficiency. This review summarizes recent advancements in the field of using metabolic engineering strategies to construct engineered S. cerevisiae over the past ten years. Five different types of compounds are classified by their metabolites, and the modified metabolic pathways and strategies are summarized and discussed independently. This review may provide guidance for future metabolic engineering efforts toward such compounds and analogues. Additionally, the limitations of S. cerevisiae as a cell factory and its future trends are comprehensively discussed.

Translational fusion of terpene synthases for metabolic engineering: Lessons learned and practical considerations

The step catalyzed by terpene synthases is a well-recognized and significant bottleneck in engineered terpenoid bioproduction. Consequently, substantial efforts have been devoted towards increasing metabolic flux catalyzed by terpene synthases, employing strategies such as gene overexpression and protein engineering. Notably, numerous studies have demonstrated remarkable titer improvements by applying translational fusion, typically by fusing the terpene synthase with a prenyl diphosphate synthase that catalyzes the preceding step in the pathway. The main appeal of the translational fusion approach lies in its simplicity and orthogonality to other metabolic engineering tools. However, there is currently limited understanding of the underlying mechanism of flux enhancement, owing to the unpredictable and often protein-specific effects of translational fusion. In this chapter, we discuss practical considerations when engineering translationally fused terpene synthases, drawing insights from our experience and existing literature. We also provide detailed experimental workflows and protocols based on our previous work in budding yeast (Saccharomyces cerevisiae). Our intention is to encourage further research into the translational fusion of terpene synthases, anticipating that this will contribute mechanistic insights not only into the activity, behavior, and regulation of terpene synthases, but also of other enzymes.

Oxetane Ring Formation in Taxol Biosynthesis Is Catalyzed by a Bifunctional Cytochrome P450 Enzyme

Taxol is a potent drug used in various cancer treatments. Its complex structure has prompted extensive research into its biosynthesis. However, certain critical steps, such as the formation of the oxetane ring, which is essential for its activity, have remained unclear. Previous proposals suggested that oxetane formation follows the acetylation of taxadien-5α-ol. Here, we proposed that the oxetane ring is formed by cytochrome P450-mediated oxidation events that occur prior to C5 acetylation. To test this hypothesis, we analyzed the genomic and transcriptomic information for Taxus species to identify cytochrome P450 candidates and employed two independent systems, yeast (Saccharomyces cerevisiae) and plant (Nicotiana benthamiana), for their characterization. We revealed that a single enzyme, CYP725A4, catalyzes two successive epoxidation events, leading to the formation of the oxetane ring. We further showed that both taxa-4(5)-11(12)-diene (endotaxadiene) and taxa-4(20)-11(12)-diene (exotaxadiene) are precursors to the key intermediate, taxologenic oxetane, indicating the potential existence of multiple routes in the Taxol pathway. Thus, we unveiled a long-elusive step in Taxol biosynthesis.

Multi-modular metabolic engineering and efflux engineering for enhanced lycopene production in recombinant Saccharomyces cerevisiae

Lycopene has been widely used in the food industry and medical field due to its antioxidant, anti-cancer, and anti-inflammatory properties. However, achieving efficient manufacture of lycopene using chassis cells on an industrial scale remains a major challenge. Herein, we attempted to integrate multiple metabolic engineering strategies to establish an efficient and balanced lycopene biosynthetic system in Saccharomyces cerevisiae. First, the lycopene synthesis pathway was modularized to sequentially enhance the metabolic flux of the mevalonate pathway, the acetyl-CoA supply module, and lycopene exogenous enzymatic module. The modular operation enabled the efficient conversion of acetyl-CoA to downstream pathway of lycopene synthesis, resulting in a 3.1-fold increase of lycopene yield. Second, we introduced acetate as an exogenous carbon source and utilized an acetate-repressible promoter to replace the natural ERG9 promoter. This approach not only enhanced the supply of acetyl-CoA but also concurrently diminished the flux toward the competitive ergosterol pathway. As a result, a further 42.3% increase in lycopene production was observed. Third, we optimized NADPH supply and mitigated cytotoxicity by overexpressing ABC transporters to promote lycopene efflux. The obtained strain YLY-PDR11 showed a 12.7-fold increase in extracellular lycopene level compared to the control strain. Finally, the total lycopene yield reached 343.7 mg/L, which was 4.3 times higher than that of the initial strain YLY-04. Our results demonstrate that combining multi-modular metabolic engineering with efflux engineering is an effective approach to improve the production of lycopene. This strategy can also be applied to the overproduction of other desirable isoprenoid compounds with similar synthesis and storage patterns in S. cerevisiae.

ONE-SENTENCE SUMMARY

In this research, lycopene production in yeast was markedly enhanced by integrating a multi-modular approach, acetate signaling-based down-regulation of competitive pathways, and an efflux optimization strategy.

Engineering yeast for the production of plant terpenoids using synthetic biology approaches

Covering: 2011-2022The low amounts of terpenoids produced in plants and the difficulty in synthesizing these complex structures have stimulated the production of terpenoid compounds in microbial hosts by metabolic engineering and synthetic biology approaches. Advances in engineering yeast for terpenoid production will be covered in this review focusing on four directions: (1) manipulation of host metabolism, (2) rewiring and reconstructing metabolic pathways, (3) engineering the catalytic activity, substrate selectivity and product specificity of biosynthetic enzymes, and (4) localizing terpenoid production via enzymatic fusions and scaffolds, or subcellular compartmentalization.

Expression of toxic genes in Methylorubrum extorquens with a tightly repressed, cumate-inducible promoter

Methylorubrum extorquens is an important model methylotroph and has enormous potential for the development of C1-based microbial cell factories. During strain construction, regulated promoters with a low background expression level are important genetic tools for expression of potentially toxic genes. Here we present an accordingly optimised promoter, which can be used for that purpose. During construction and testing of terpene production strains harbouring a recombinant mevalonate pathway, strong growth defects were observed which made strain development impossible. After isolation and characterisation of suppressor mutants, we discovered a variant of the cumate-inducible promoter PQ2148 used in this approach. Deletion of 28 nucleotides resulted in an extremely low background expression level, but also reduced the maximal expression strength to about 30% of the original promoter. This tightly repressed promoter version is a powerful module for controlled expression of potentially toxic genes in M. extorquens.

Engineering Nannochloropsis oceanica for the production of diterpenoid compounds

Photosynthetic microalgae like Nannochloropsis hold enormous potential as sustainable, light-driven biofactories for the production of high-value natural products such as terpenoids. Nannochloropsis oceanica is distinguished as a particularly robust host with extensive genomic and transgenic resources available. Its capacity to grow in wastewater, brackish, and sea waters, coupled with advances in microalgal metabolic engineering, genome editing, and synthetic biology, provides an excellent opportunity. In the present work, we demonstrate how N. oceanica can be engineered to produce the diterpene casbene-an important intermediate in the biosynthesis of pharmacologically relevant macrocyclic diterpenoids. Casbene accumulated after stably expressing and targeting the casbene synthase from Daphne genkwa (DgTPS1) to the algal chloroplast. The engineered strains yielded production titers of up to 0.12 mg g-1 total dry cell weight (DCW) casbene. Heterologous overexpression and chloroplast targeting of two upstream rate-limiting enzymes in the 2-C-methyl- d-erythritol 4-phosphate pathway, Coleus forskohlii 1-deoxy- d-xylulose-5-phosphate synthase and geranylgeranyl diphosphate synthase genes, further enhanced the yield of casbene to a titer up to 1.80 mg g-1 DCW. The results presented here form a basis for further development and production of complex plant diterpenoids in microalgae.

Enhancement of β-Caryophyllene Biosynthesis in Saccharomyces cerevisiae via Synergistic Evolution of β-Caryophyllene Synthase and Engineering the Chassis

β-Caryophyllene is a plant-derived bicyclic sesquiterpene with multiple biological functions. β-Caryophyllene production by engineered Saccharomyces cerevisiae represents a promising technological route. However, the low catalytic activity of β-caryophyllene synthase (CPS) is one of the main restrictive factors for β-caryophyllene production. Here, directed evolution of the Artemisia annua CPS was performed, and variants of CPS enhancing the β-caryophyllene biosynthesis in S. cerevisiae were obtained, in which an E353D mutant enzyme presented large improvements in Vmax and Kcat. The Kcat/Km of the E353D mutant was 35.5% higher than that of wild-type CPS. Moreover, the E353D variant exhibited higher catalytic activity in much wider pH and temperature ranges. Thus, both the higher catalytic activity and the robustness of the E353D variant contribute to the 73.3% increase in β-caryophyllene production. Furthermore, the S. cerevisiae chassis was engineered by overexpressing genes related to β-alanine metabolism and MVA pathway to enhance the synthesis of the precursor, and ATP-binding cassette transporter gene variant STE6T1025N to improve the transmembrane transport of β-caryophyllene. The combined engineering of CPS and chassis resulted in 70.45 mg/L of β-caryophyllene after 48 h of cultivation in a test tube, which was 2.93-fold of that of the original strain. Finally, a β-caryophyllene yield of 594.05 mg/L was obtained by fed-batch fermentation, indicating the potential of β-caryophyllene production by yeast.

Optimization of Campesterol-Producing Yeast Strains as a Feasible Platform for the Functional Reconstitution of Plant Membrane-Bound Enzymes

Campesterol is a major phytosterol that plays important roles in regulating membrane properties and serves as the precursor to multiple specialized metabolites, such as the phytohormone brassinosteroids. Recently, we established a campesterol-producing yeast strain and extended the bioproduction to 22-hydroxycampesterol and 22-hydroxycampest-4-en-3-one, the precursors to brassinolide. However, there is a trade-off in growth due to the disrupted sterol metabolism. In this study, we enhanced the growth of the campesterol-producing yeast by partially restoring the activity of the sterol acyltransferase and engineering upstream FPP supply. Furthermore, genome sequencing analysis also revealed a pool of genes possibly associated with the altered sterol metabolism. Retro engineering implies an essential role of ASG1, especially the C-terminal asparagine-rich domain of ASG1, in the sterol metabolism of yeast especially under stress. The performance of the campesterol-producing yeast strain was enhanced with the titer of campesterol to 18.4 mg/L, and the stationary OD600 was improved by ∼33% compared to the unoptimized strain. In addition, we examined the activity of a plant cytochrome P450 in the engineered strain, which exhibits more than 9-fold higher activity than when expressed in the wild-type yeast strain. Therefore, the engineered campesterol-producing yeast strain also serves as a robust host for the functional expression of plant membrane proteins.

Identification and Functional Analysis of Two Novel Genes-Geranylgeranyl Pyrophosphate Synthase Gene (AlGGPPS) and Isopentenyl Pyrophosphate Isomerase Gene (AlIDI)-from Aurantiochytrium limacinum Significantly Enhance De Novo β-Carotene Biosynthesis in Escherichia coli

Precursor regulation has been an effective strategy to improve carotenoid production and the availability of novel precursor synthases facilitates engineering improvements. In this work, the putative geranylgeranyl pyrophosphate synthase encoding gene (AlGGPPS) and isopentenyl pyrophosphate isomerase encoding gene (AlIDI) from Aurantiochytrium limacinum MYA-1381 were isolated. We applied the excavated AlGGPPS and AlIDI to the de novo β-carotene biosynthetic pathway in Escherichia coli for functional identification and engineering application. Results showed that the two novel genes both functioned in the synthesis of β-carotene. Furthermore, AlGGPPS and AlIDI performed better than the original or endogenous one, with 39.7% and 80.9% increases in β-carotene production, respectively. Due to the coordinated expression of the 2 functional genes, β-carotene content of the modified carotenoid-producing E. coli accumulated a 2.99-fold yield of the initial EBIY strain in 12 h, reaching 10.99 mg/L in flask culture. This study helped to broaden current understanding of the carotenoid biosynthetic pathway in Aurantiochytrium and provided novel functional elements for carotenoid engineering improvements.

Metabolic flux enhancement from the translational fusion of terpene synthases is linked to terpene synthase accumulation

The end-to-end fusion of enzymes that catalyse successive steps in a reaction pathway is a metabolic engineering strategy that has been successfully applied in a variety of pathways and is particularly common in terpene bioproduction. Despite its popularity, limited work has been done to interrogate the mechanism of metabolic enhancement from enzyme fusion. We observed a remarkable >110-fold improvement in nerolidol production upon translational fusion of nerolidol synthase (a sesquiterpene synthase) to farnesyl diphosphate synthase. This delivered a titre increase from 29.6 mg/L up to 4.2 g/L nerolidol in a single engineering step. Whole-cell proteomic analysis revealed that nerolidol synthase levels in the fusion strains were greatly elevated compared to the non-fusion control. Similarly, the fusion of nerolidol synthase to non-catalytic domains also produced comparable increases in titre, which coincided with improved enzyme expression. When farnesyl diphosphate synthase was fused to other terpene synthases, we observed more modest improvements in terpene titre (1.9- and 3.8-fold), corresponding with increases of a similar magnitude in terpene synthase levels. Our data demonstrate that increased in vivo enzyme levels - resulting from improved expression and/or improved protein stability - is a major driver of catalytic enhancement from enzyme fusion.

Sustainable biosynthesis of valuable diterpenes in microbes

Diterpenes, or diterpenoids, are the most abundant and diverse subgroup of terpenoids, the largest family of secondary metabolites. Most diterpenes possess broad biological activities including anti-inflammatory, antiviral, anti-tumoral, antimicrobial, anticancer, antifungal, antidiabetic, cardiovascular protective, and phytohormone activities. As such, diterpenes have wide applications in medicine (e.g., the anticancer drug Taxol and the antibiotic pleuromutilin), agriculture (especially as phytohormones such as gibberellins), personal care (e.g., the fragrance sclareol) and food (e.g., steviol glucosides as low-calorie sweeteners) industries. Diterpenes are biosynthesized in a common route with various diterpene synthases and decoration enzymes like cytochrome P450 oxidases, glycosidases, and acyltransferases. Recent advances in DNA sequencing and synthesis, omics analysis, synthetic biology, and metabolic engineering have enabled efficient production of diterpenes in several chassis hosts like Escherichia coli, Saccharomyces cerevisiae, Yarrowia lipolytica, Rhodosporidium toruloides, and Fusarium fujikuroi. This review summarizes the recently discovered diterpenes, their related enzymes and biosynthetic pathways, particularly highlighting the microbial synthesis of high-value diterpenes directly from inexpensive carbon sources (e.g., sugars). The high titers (>4 g/L) achieved mean that some of these endeavors are reaching or close to commercialization. As such, we envisage a bright future in translating microbial synthesis of diterpenes into commercialization.

Overproduction of Patchoulol in Metabolically Engineered Komagataella phaffii

Patchoulol, a plant-derived sesquiterpene compound, is widely used in perfumes, cosmetics, and pharmaceuticals. Microbial production provides a promising alternative approach for the efficient and sustainable production of patchoulol. However, there are no systematic engineering studies on Komagataella phaffii aimed at achieving high-yield patchoulol production. Herein, by fusion overexpression of FPP synthase and patchoulol synthase (ERG20LPTS), increasing the precursor supply, adjusting the copy number of ERG20LPTS and PTS, and combined with adding auxiliary carbon source and methanol concentration optimization, we constructed a high-yield patchoulol-producing strain P6H53, which produced 149.64 mg/L patchoulol in shake-flask fermentation with methanol as the substrate. In fed-batch fermentation, strain P6H53 achieved the highest production (2.47 g/L, 21.48 mg/g DCW, and 283.25 mg/L/d) to date in a 5 L fermenter. This study will lay a good foundation for the development of K. phaffii as a promising chassis microbial cell for the synthesis of patchoulol and other sesquiterpenes with methanol as the carbon source.

Engineering yeast for high-level production of diterpenoid sclareol

The diterpenoid sclareol is an industrially important precursor for alternative sustainable supply of ambergris. However, its current production from plant extraction is neither economical nor environmental-friendly, since it requires laborious and cost-intensive purification procedures and plants cultivation is susceptible to environmental factors. Engineering cell factories for bio-manufacturing can enable sustainable production of natural products. However, stringent metabolic regulation poses challenges to rewire cellular metabolism for overproduction of compounds of interest. Here we used a modular approach to globally rewire the cellular metabolism for improving sclareol production to 11.4 g/L in budding yeast Saccharomyces cerevisiae, the highest reported diterpenoid titer in microbes. Metabolic flux analysis showed that modular balanced metabolism drove the metabolic flux toward the biosynthesis of targeted molecules, and transcriptomic analysis revealed that the expression of central metabolism genes was shaped for a new balanced metabolism, which laid a foundation in extensive metabolic engineering of other microbial species for sustainable bio-production.

Microbial electrosynthesis from carbon dioxide feedstock linked to yeast growth for the production of high-value isoprenoids

The difficulty in producing multi-carbon and thus high-value chemicals from CO₂ is one of the key challenges of microbial electrosynthesis (MES) and other CO₂ utilization technologies. Here, we demonstrate a two-stage bioproduction approach to produce terpenoids (>C₂₀) and yeast biomass from CO₂ by linking MES and yeast cultivation approaches. In the first stage, CO₂ (C₁) is converted to acetate (C₂) using Clostridium ljungdahlii via MES. The acetate is then directly used as the feedstock to produce sclareol (C₂₀), β-carotene (C₄₀), and yeast biomass using Saccharomyces cerevisiae in the second stage. With the unpurified acetate-containing (1.5 g/L) spent medium from MES reactors, S. cerevisiae produced 0.32 ± 0.04 mg/L β-carotene, 2.54 ± 0.91 mg/L sclareol, and 369.66 ± 41.67 mg/L biomass. The primary economic analysis suggests that sclareol and biomass production is feasible using recombinant S. cerevisiae and non-recombinant S. cerevisiae, respectively, directly from unpurified acetate-containing spent medium of MES.

Heterologous production of Cannabis sativa-derived specialised metabolites of medicinal significance - Insights into engineering strategies

Cannabis sativa L. has been known for at least 2000 years as a source of important, medically significant specialised metabolites and several bio-active molecules have been enriched from multiple chemotypes. However, due to the many levels of complexity in both the commercial cultivation of cannabis and extraction of its specialised metabolites, several heterologous production approaches are being pursued in parallel. In this review, we outline the recent achievements in engineering strategies used for heterologous production of cannabinoids, terpenes and flavonoids along with their strength and weakness. We provide an overview of the specialised metabolism pathway in C. sativa and a comprehensive list of the specialised metabolites produced along with their medicinal significance. We highlight cannabinoid-like molecules produced by other species. We discuss the key biosynthetic enzymes and their heterologous production using various hosts such as microbial and eukaryotic systems. A brief discussion on complementary production strategies using co-culturing and cell-free systems is described. Various approaches to optimise specialised metabolite production through co-expression, enzyme engineering and pathway engineering are discussed. We derive insights from recent advances in metabolic engineering of hosts with improved precursor supply and suggest their application for the production of C. sativa speciality metabolites. We present a collation of non-conventional hosts with speciality traits that can improve the feasibility of commercial heterologous production of cannabis-based specialised metabolites. We provide a perspective of emerging research in synthetic biology, allied analytical techniques and plant heterologous platforms as focus areas for heterologous production of cannabis specialised metabolites in the future.

Farnesyl pyrophosphate compartmentalization in the green microalga Chlamydomonas reinhardtii during heterologous (E)-α-bisabolene production

Background

Eukaryotic algae have recently emerged as hosts for metabolic engineering efforts to generate heterologous isoprenoids. Isoprenoid metabolic architectures, flux, subcellular localization, and transport dynamics have not yet been fully elucidated in algal hosts.

Results

In this study, we investigated the accessibility of different isoprenoid precursor pools for C₁₅ sesquiterpenoid generation in the cytoplasm and chloroplast of Chlamydomonas reinhardtii using the Abies grandis bisabolene synthase (AgBS) as a reporter. The abundance of the C₁₅ sesquiterpene precursor farnesyl pyrophosphate (FPP) was not increased in the cytosol by co-expression and fusion of AgBS with different FPP synthases (FPPSs), indicating limited C₅ precursor availability in the cytoplasm. However, FPP was shown to be available in the plastid stroma, where bisabolene titers could be improved several-fold by FPPSs. Sesquiterpene production was greatest when AgBS-FPPS fusions were directed to the plastid and could further be improved by increasing the gene dosage. During scale-up cultivation with different carbon sources and light regimes, specific sesquiterpene productivities from the plastid were highest with CO₂ as the only carbon source and light:dark illumination cycles. Potential prenyl unit transporters are proposed based on bioinformatic analyses, which may be in part responsible for our observations.

Conclusions

Our findings indicate that the algal chloroplast can be harnessed in addition to the cytosol to exploit the full potential of algae as green cell factories for non-native sesquiterpenoid generation. Identification of a prenyl transporter may be leveraged for further extending this capacity.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01910-5.

Expanding the terpene biosynthetic code with non-canonical 16 carbon atom building blocks

Humankind relies on specialized metabolites for medicines, flavors, fragrances, and numerous other valuable biomaterials. However, the chemical space occupied by specialized metabolites, and, thus, their application potential, is limited because their biosynthesis is based on only a handful of building blocks. Engineering organisms to synthesize alternative building blocks will bypass this limitation and enable the sustainable production of molecules with non-canonical chemical structures, expanding the possible applications. Herein, we focus on isoprenoids and combine synthetic biology with protein engineering to construct yeast cells that synthesize 10 non-canonical isoprenoid building blocks with 16 carbon atoms. We identify suitable terpene synthases to convert these building blocks into C₁₆ scaffolds and a cytochrome P450 to decorate the terpene scaffolds and produce different oxygenated compounds. Thus, we reconstruct the modular structure of terpene biosynthesis on 16-carbon backbones, synthesizing 28 different non-canonical terpenes, some of which have interesting odorant properties.

Advances in Metabolic Engineering Paving the Way for the Efficient Biosynthesis of Terpenes in Yeasts

Terpenes are a large class of secondary metabolites with diverse structures and functions that are commonly used as valuable raw materials in food, cosmetics, and medicine. With the development of metabolic engineering and emerging synthetic biology tools, these important terpene compounds can be sustainably produced using different microbial chassis. Currently, yeasts such as Saccharomyces cerevisiae and Yarrowia lipolytica have received extensive attention as potential hosts for the production of terpenes due to their clear genetic background and endogenous mevalonate pathway. In this review, we summarize the natural terpene biosynthesis pathways and various engineering strategies, including enzyme engineering, pathway engineering, and cellular engineering, to further improve the terpene productivity and strain stability in these two widely used yeasts. In addition, the future prospects of yeast-based terpene production are discussed in light of the current progress, challenges, and trends in this field. Finally, guidelines for future studies are also emphasized.

Engineering a powerful green cell factory for robust photoautotrophic diterpenoid production

Diterpenoids display a large and structurally diverse class of natural compounds mainly found as specialized plant metabolites. Due to their diverse biological functions they represent an essential source for various industrially relevant applications as biopharmaceuticals, nutraceuticals, and fragrances. However, commercial production utilizing their native hosts is inhibited by low abundances, limited cultivability, and challenging extraction, while the precise stereochemistry displays a particular challenge for chemical synthesis. Due to a high carbon flux through their native 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway towards photosynthetically active pigments, green microalgae hold great potential as efficient and sustainable heterologous chassis for sustainable biosynthesis of plant-derived diterpenoids. In this study, innovative synthetic biology and efficient metabolic engineering strategies were systematically combined to re-direct the metabolic flux through the MEP pathway for efficient heterologous diterpenoid synthesis in C. reinhardtii. Engineering of the 1-Deoxy-D-xylulose 5-phosphate synthase (DXS) as the main rate-limiting enzyme of the MEP pathway and overexpression of diterpene synthase fusion proteins increased the production of high-value diterpenoids. Applying fully photoautotrophic high cell density cultivations demonstrate potent and sustainable production of the high-value diterpenoid sclareol up to 656 mg L^-1 with a maximal productivity of 78 mg L^-1 day^-1 in a 2.5 L scale photobioreactor, which is comparable to sclareol titers reached by highly engineered yeast. Consequently, this work represents a breakthrough in establishing a powerful phototrophic green cell factory for the competetive use in industrial biotechnology.

Metabolic Engineering of Saccharomyces cerevisiae for Heterologous Carnosic Acid Production

Carnosic acid (CA), a phenolic tricyclic diterpene, has many biological effects, including anti-inflammatory, anticancer, antiobesity, and antidiabetic activities. In this study, an efficient biosynthetic pathway was constructed to produce CA in Saccharomyces cerevisiae. First, the CA precursor miltiradiene was synthesized, after which the CA production strain was constructed by integrating the genes encoding cytochrome P450 enzymes (P450s) and cytochrome P450 reductase (CPR) SmCPR. The CA titer was further increased by the coexpression of CYP76AH1 and SmCPR ∼t28SpCytb5 fusion proteins and the overexpression of different catalases to detoxify the hydrogen peroxide (H₂O₂). Finally, engineering of the endoplasmic reticulum and cofactor supply increased the CA titer to 24.65 mg/L in shake flasks and 75.18 mg/L in 5 L fed-batch fermentation. This study demonstrates that the ability of engineered yeast cells to synthesize CA can be improved through metabolic engineering and synthetic biology strategies, providing a theoretical basis for microbial synthesis of other diterpenoids.

An in vivo gene amplification system for high level expression in Saccharomyces cerevisiae

Bottlenecks in metabolic pathways due to insufficient gene expression levels remain a significant problem for industrial bioproduction using microbial cell factories. Increasing gene dosage can overcome these bottlenecks, but current approaches suffer from numerous drawbacks. Here, we describe HapAmp, a method that uses haploinsufficiency as evolutionary force to drive in vivo gene amplification. HapAmp enables efficient, titratable, and stable integration of heterologous gene copies, delivering up to 47 copies onto the yeast genome. The method is exemplified in metabolic engineering to significantly improve production of the sesquiterpene nerolidol, the monoterpene limonene, and the tetraterpene lycopene. Limonene titre is improved by 20-fold in a single engineering step, delivering ∼1 g L-1 in the flask cultivation. We also show a significant increase in heterologous protein production in yeast. HapAmp is an efficient approach to unlock metabolic bottlenecks rapidly for development of microbial cell factories.

Selective biosynthesis of retinol in S. cerevisiae

The vitamin A component retinol has become an increasingly sought-after cosmetic ingredient. In previous efforts for microbial biosynthesis of vitamin A, a mixture of retinoids was produced. In order to efficiently produce retinol at high purity, the precursor and NADPH supply was first enhanced to improve retinoids accumulation in the S. cerevisiae strain constructed from a β-carotene producer by introducing β-carotene 15,15'-dioxygenase, following by screening of heterologous and endogenous oxidoreductases for retinal reduction. Env9 was found as an endogenous retinal reductase and its activity was verified in vitro. By co-expressing Env9 with the E. coli ybbO, as much as 443.43 mg/L of retinol was produced at 98.76% purity in bi-phasic shake-flask culture when the antioxidant butylated hydroxytoluene was added to prevent retinoids degradation. The retinol titer reached 2479.34 mg/L in fed-batch fermentation. The success in selective biosynthesis of retinol would lay a solid foundation for its biotechnological production.

The beauty of biocatalysis: sustainable synthesis of ingredients in cosmetics

Covering: 2015 up to July 2021The market for cosmetics is consumer driven and the desire for green, sustainable and natural ingredients is increasing. The use of isolated enzymes and whole-cell organisms to synthesise these products is congruent with these values, especially when combined with the use of renewable, recyclable or waste feedstocks. The literature of biocatalysis for the synthesis of ingredients in cosmetics in the past five years is herein reviewed.

Reconstitution of biosynthetic pathway for mushroom-derived cyathane diterpenes in yeast and generation of new "non-natural" analogues

Mushroom-derived cyathane-type diterpenes possess unusual chemical skeleton and diverse bioactivities. To efficiently supply bioactive cyathanes for deep studies and explore their structural diversity, de novo synthesis of cyathane diterpenes in a geranylgeranyl pyrophosphate engineered Saccharomyces cerevisiae is investigated. Aided by homologous analyses, one new unclustered FAD-dependent oxidase EriM accounting for the formation of allyl aldehyde and three new NADP(H)-dependent reductases in the biosynthesis of cyathanes are identified and elucidated. By combinatorial biosynthetic strategy, S. cerevisiae strains generating twenty-two cyathane-type diterpenes, including seven "unnatural" cyathane xylosides (12, 13, 14a, 14b, 19, 20, and 22) are established. Compounds 12-14, 19, and 20 show significant neurotrophic effects on PC12 cells in the dose of 6.3-25.0 μmol/L. These studies provide new insights into the divergent biosynthesis of mushroom-originated cyathanes and a straightforward approach to produce bioactive cyathane-type diterpenes.

Functional characterization and substrate promiscuity of sesquiterpene synthases from Tripterygium wilfordii

Acyclic terpenes, commonly found in plants, are of high physiological importance and commercial value, and their diversity was controlled by different terpene synthases. During the screen of sesquiterpene synthases from Tripterygium wilfordii, we observed that Ses-TwTPS1-1 and Ses-TwTPS2 promiscuously accepted GPP, FPP, and GGPP to produce corresponding terpene alcohols (linalool/nerolidol/geranyllinalool). The Ses-TwTPS1-2, Ses-TwTPS3, and Ses-TwTPS4 also showed unusual substrate promiscuity by catalyzing GGPP or GPP in addition to FPP as substrate. Furthermore, key residues for the generation of diterpene product, (E, E)-geranyllinalool, were screened depending on mutagenesis studies. The functional analysis of Ses-TwTPS1-1:V199I and Ses-TwTPS1-2:I199V showed that Val in 199 site assisted the produce of diterpene product geranyllinalool by enzyme mutation studies, which indicated that subtle differences away from the active site could alter the product outcome. Moreover, an engineered sesquiterpene high-yielding yeast that produced 162 mg/L nerolidol in shake flask conditions was constructed to quickly identify the function of sesquiterpene synthases in vivo and develop potential applications in microbial fermentation. Our functional characterization of acyclic sesquiterpene synthases will give some insights into the substrate promiscuity of diverse acyclic terpene synthases and provide key residues for expanding the product portfolio.

Genetic engineering of yeast, filamentous fungi and bacteria for terpene production and applications in food industry

Terpenes are a major class of natural aromatic compounds in grapes and wines to offer the characteristic flavor and aroma, serving as important quality traits of wine products. Saccharomyces cerevisiae represents an excellent cell factory platform for large-scale bio-based terpene production. This review describes the biosynthetic pathways of terpenes in different organisms. The metabolic engineering of S. cerevisiae for promoting terpene biosynthesis and the alternative microbial engineering platforms including filamentous fungi and Escherichia coli are also elaborated. Additionally, the potential applications of the terpene products from engineered microorganisms in food and beverage industries are also discussed. This review provides comprehensive information for an innovative supply way of terpene via microbial cell factory, which could facilitate the development and application of this technique at the industrial scale.

Recent progress and new perspectives for diterpenoid biosynthesis in medicinal plants

Diterpenoids, including more than 18,000 compounds, represent an important class of metabolites that encompass both phytohormones and some industrially relevant compounds. These molecules with complex, diverse structures and physiological activities, have high value in the pharmaceutical industry. Most medicinal diterpenoids are extracted from plants. Major advances in understanding the biosynthetic pathways of these active compounds are providing unprecedented opportunities for the industrial production of diterpenoids by metabolic engineering and synthetic biology. Here, we summarize recent developments in the field of diterpenoid biosynthesis from medicinal herbs. An overview of the pathways and known biosynthetic enzymes is presented. In particular, we look at the main findings from the past decade and review recent progress in the biosynthesis of different groups of ringed compounds. We also discuss diterpenoid production using synthetic biology and metabolic engineering strategies, and draw on new technologies and discoveries to bring together many components into a useful framework for diterpenoid production.

Developing a Yeast Platform Strain for an Enhanced Taxadiene Biosynthesis by CRISPR/Cas9

Paclitaxel is an important diterpenoid commonly used as an anticancer drug. Although the paclitaxel biosynthetic pathway has been mostly revealed, some steps remain to be elucidated. The difficulties in plant transformations and the scarcity of the precursor of paclitaxel, (+)-taxa-4(5), 11(12)-diene (taxadiene), have hindered the full comprehension of paclitaxel biochemistry and, therefore, its production by biotechnological approaches. One solution is to use the budding yeast, Saccharomyces cerevisiae, as a platform to elucidate the paclitaxel biosynthesis. As taxadiene is a diterpenoid, its common precursor, geranylgeranyl pyrophosphate (GGPP), needs to be increased in yeast. In this study, we screened various GGPP synthases (GGPPS) to find the most suitable GGPPS for taxadiene production in yeast. We also optimized the taxadiene production by increasing the flux toward the terpenoid pathway. Finally, to remove selection markers, we integrated the required genes using a CRISPR/Cas9 system in the yeast genome. Our result showed that a titer of 2.02 ± 0.40 mg/L (plasmid) and 0.41 ± 0.06 mg/L (integrated) can be achieved using these strategies. This platform strain can be used to readily test the gene candidates for microbial paclitaxel biosynthesis in the future.

Metabolic engineering and synthetic biology for isoprenoid production in Escherichia coli and Saccharomyces cerevisiae

Isoprenoids, often called terpenoids, are the most abundant and highly diverse family of natural organic compounds. In plants, they play a distinct role in the form of photosynthetic pigments, hormones, electron carrier, structural components of membrane, and defence. Many isoprenoids have useful applications in the pharmaceutical, nutraceutical, and chemical industries. They are synthesized by various isoprenoid synthase enzymes by several consecutive steps. Recent advancement in metabolic engineering and synthetic biology has enabled the production of these isoprenoids in the heterologous host systems like Escherichia coli and Saccharomyces cerevisiae. Both heterologous systems have been engineered for large-scale production of value-added isoprenoids. This review article will provide the detailed description of various approaches used for engineering of methyl-D-erythritol-4-phosphate (MEP) and mevalonate (MVA) pathway for synthesizing isoprene units (C₅) and ultimate production of diverse isoprenoids. The review particularly highlighted the efforts taken for the production of C₅-C₂₀ isoprenoids by metabolic engineering techniques in E. coli and S. cerevisiae over a decade. The challenges and strategies are also discussed in detail for scale-up and engineering of isoprenoids in the heterologous host systems.Key points• Isoprenoids are beneficial and valuable natural products.• E. coli and S. cerevisiae are the promising host for isoprenoid biosynthesis.• Emerging techniques in synthetic biology enabled the improved production.• Need to expand the catalogue and scale-up of un-engineered isoprenoids. Metabolic engineering and synthetic biology for isoprenoid production in Escherichia coli and Saccharomyces cerevisiae.

Protein engineering strategies for microbial production of isoprenoids

Isoprenoids comprise one of the most chemically diverse family of natural products with high commercial interest. The structural diversity of isoprenoids is mainly due to the modular activity of three distinct classes of enzymes, including prenyl diphosphate synthases, terpene synthases, and cytochrome P450s. The heterologous expression of these enzymes in microbial systems is suggested to be a promising sustainable way for the production of isoprenoids. Several limitations are associated with native enzymes, such as low stability, activity, and expression profiles. To address these challenges, protein engineering has been applied to improve the catalytic activity, selectivity, and substrate turnover of enzymes. In addition, the natural promiscuity and modular fashion of isoprenoid enzymes render them excellent targets for combinatorial studies and the production of new-to-nature metabolites. In this review, we discuss key individual and multienzyme level strategies for the successful implementation of enzyme engineering towards efficient microbial production of high-value isoprenoids. Challenges and future directions of protein engineering as a complementary strategy to metabolic engineering are likewise outlined.