Antimony release from polyester textiles by artificial sweat solutions: A call for a standardized procedure

Elemental Composition of Commercially Available Cannabis Rolling Papers

With the recent legalization of cannabis in multiple jurisdictions and widespread use as a medical treatment, there has been an increased focus on product safety and the potential impacts of contaminants on human health. One factor that has received little attention is the possible exposure to potentially hazardous levels of toxic elements from rolling (smoking) papers. The elemental composition of rolling papers is largely unregulated, with a minority of jurisdictions regulating papers only when they are part of a final cannabis product. This study reports the concentrations of 26 elements in commercially available rolling papers and estimates potential maximum exposures relative to USP232 and ICH Q3D dosages in pharmaceutical compounds. Exposure estimates indicate that the concentrations of several elements in some products, particularly Cu, Cr, and V, may present a potential hazard to frequent users. Several elements, including Ag, Ca, Ba, Cu, Ti, Cr, Sb, and possibly others, are likely present in elevated quantities in some papers due to product design and manufacturing processes. Our results further suggest that Cu-based pigments are used by a number of manufacturers and that regular use of these products might result in exposures as high as 4.5-11 times the maximum exposure limits. Further research to quantify the contribution of rolling papers to elemental exposure under realistic smoking conditions is warranted.

Trends in flame retardant levels in upholstered furniture and children's consumer products after regulatory action in California

In 2013, California revised its upholstered furniture flammability standard TB 117-2013 to improve fire safety without the need for flame retardant (FR) chemicals. Subsequent legislation (SB 1019) required disclosure of FR content. In 2020 California expanded restriction on FR chemicals to include juvenile products and upholstered furniture (AB 2998). To monitor trends in FR use, and assess the effectiveness of the new regulations, we analyzed 346 samples from upholstered furniture (n = 270) and children's consumer products (n = 76), collected pre- and post-regulatory intervention for added FR chemicals (i.e., ∑FR > 1000 mg/kg). Upholstered furniture samples, collected from products before enactment of the new regulations, had a median FR concentration of 41,600 mg/kg (range: 1360-92,900 mg/kg), with 100% of the foam samples and 13.7% of the textile samples containing ∑FR > 1000 mg/kg. Firemaster formulations (FM 550 and FM 600), a mixture of triphenyl phosphate (TPHP), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (EH-TBB), bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (BEH-TEBP) and a mixture of isopropyl- or tert-butyl-triphenyl phosphates (ITPs or TBPPs), were the most frequently detected FR (34%), followed by tris(1,3-dichloroisopropyl) phosphate (TDCIPP; 25%), TPHP with a mixture of polybrominated diphenyl ethers (BDE-47, 99, 100, 153 and 154; 20%) and tris(2-chloroethyl) phosphate (TCEP; 11%). Upholstered furniture components collected after enactment of the new legislation had a median FR concentration of 2600 mg/kg (range: 1160-49,800 mg/kg, outlier sample 282,200 mg/kg), with 11.9% of the foam samples and no textile samples containing ∑FR > 1000 mg/kg. Of these samples, tris(1-chloro-2-propyl) phosphate (TCIPP) was the most frequently detected FR (55%), followed by TDCIPP (30%) and Firemaster (FM 550, 15%). No PBDEs were detected in the post-regulatory intervention products. Our initial work on children's products showed 15% of the samples contained ∑FR > 1000 mg/kg. In our post- AB 2998 work, no regulated children's product components failed compliance (i.e., ∑FR > 1000 mg/kg). The data confirm successful adoption of the new regulations with most samples in compliance, demonstrating the efficacy of regulatory intervention. Given these results, environmental FR exposure is expected to decrease as older FR treated consumer products are replaced with FR free products.

Cleaner production evaluation system for textile industry: An empirical study from LCA perspectives

The contradiction between the rapid textile expansion and intensive energy consumption, highly environmental pollution calls for the adoption of cleaner production (CP). However, current evaluation system mainly targeted on CP at production stage, guidance and support on the life cycle assessment is still in its infancy. Meanwhile few studies brought the combination of water conservation and carbon reduction into considerations. This study compared the existing CP evaluation systems including guidelines for the whole industry, standards for textile industry and indicators for the dyeing and finishing sector by quantifying the differences of indicator score compositions. Comparisons analysis from six aspects suggested that all the evaluation systems had relevant indicators regarding "pollutant emissions". "Management", "process equipment and techniques" and "resource and energy consumption" have also been well concerned while "product characteristic" seemed to be overlooked at current stage. From the perspective of whole life cycle, the key of textile processing is the "printing and dyeing" (44.23 %) followed by "fabric manufacturing"(28.85 %) and setting (15.38 %). With regards to the environmental impacts, resources depletion gained the highest attention since their indicator scores reached up to 25.71 %, 18.47 % and 20.62 % for EMAS, ERG 2018 and HJ-1852006. Cleaner production awareness and social impact also played significant roles in ISO 14031:2021 and WMG. Subsequently, a set of new comprehensive CP evaluation indicator system was established, including 3 scopes and 7 goals. The newly-built indicator system incorporated with life cycle perspectives gave a powerful tool to measure the CP level in textile industry and of CP will benefit from water reuse and energy utilization with high efficiency.

Occurrence and potential release of heavy metals in female underwear manufactured in China: Implication for women's health

Underwear is a potential source of women's exposure to heavy metals owing to its direct contact with the skin, especially the skin of the vagina and vulva, which has a strong absorptive capacity. However, information regarding the prevalence of metals in female underwear, and its potential hazards, remains scarce. In the present study, we examined the concentrations and potential release of Cr, Co, Ni, Cu, As, Cd, Sb, and Pb in brassieres and briefs manufactured in China. We detected higher levels of Pb and moderate levels of other metals, relative to the metal levels reported for other textiles in the literature. Cu, As, Ni and Cd, had higher migration rates (MRs) from the underwear, with medians of 100%, 100%, 30.1%, and 20.7%, respectively. The median MRs of the other metals were in the range 1.07%-15.7%. On the whole, the total and extractable concentrations of these metals differed by item and fabric type. The pollution of raw materials and the use of chemical additives containing metals commonly contributed to the metals in the underwear. On the basis of the exposure estimation, the non-carcinogenic risks posed by the underwear metals were acceptable, but the carcinogenic risks from the metals in 5.18% of brassiere samples exceeded the acceptable level.

Clothing as a potential exposure source of trace elements during early life

In recent years, the interest in determining the chemical composition of textile products has increased among the scientific community and regulatory agencies, driven by toxicological issues and environmental concerns. Chemical elements are naturally present in clothing as natural fibers or intentionally added during manufacture. Some of them show physical-chemical properties that allow their absorption through the skin. In addition, chronic situations increase the dermal exposure capacity. Because of age-specific behavioral characteristics and underdeveloped physiological function, children may be especially sensitive to exposure to trace elements. This study aimed to analyze the levels of twenty trace elements in 120 clothing items commercialized in Spain. Textile products for pregnant women and children <36 months old were included. The potential health implication of this dermal exposure in early life was also evaluated. Aluminum, zinc, and titanium showed the highest concentrations, with median levels of 27.6, 5.6, and 4.2 mg/kg, respectively. Since chromium is employed as a metal complex dye in synthetic fibers, high levels of this element were found in black polyester. Dermal exposure to titanium, which is a ubiquitous element in clothes made of synthetic fibers, was associated with a hazard quotient (HQ) higher than the threshold value (HQ > 1), with values of 1.13 for pregnant women and 1.22 for newborns. On the other hand, HQ values of other elements and cancer risks were lower than the recommended values. Assessing early-life exposure to toxic elements can help to identify potential sources and to prevent or reduce human exposure, mainly in vulnerable groups.

Environmental sustainability assessment of a polyester T-shirt - Comparison of circularity strategies

The considerable environmental burden of textiles is currently globally recognized. This burden can be mitigated by applying circular economy (CE) strategies to the commonly linear, short garment life cycles that end with incineration or landfill disposal. Even though all CE strategies strive to promote environmental sustainability, they might not be equally beneficial. Environmental data on different textile products is insufficiently available, which leads to complications when assessing and deciding on different CE strategies to be implemented. This paper studies the environmental impacts of a polyester T-shirt's linear life cycle through life cycle assessment (LCA) and evaluates the benefits attainable by adopting different CE strategies, and their order of priority, while noting uncertainty arising from poor data quality or unavailability. The LCA is complemented by assessing health and environmental risks related to the different options. Most of the linear life cycle's LCA-based impacts arise from use-phase washing. Hence, it is possible to reduce the environmental impact notably (37 %) by reducing the washing frequency. Adopting a CE strategy in which the shirt is reused by a second consumer, to double the number of uses, enables an 18 % impact reduction. Repurposing recycled materials to produce the T-shirt and recycling the T-shirt material itself emerged as the least impactful CE strategies. From the risk perspective, reusing the garment is the most efficient way to reduce environmental and health risks while washing frequency has a very limited effect. Combining different CE strategies offers the greatest potential for reducing both environmental impacts as well as risks. Data gaps and assumptions related to the use phase cause the highest uncertainty in the LCA results. To gain the maximum environmental benefits of utilizing CE strategies on polyester garments, consumer actions, design solutions, and transparent data sharing are needed.

Assessment of house dust trace elements and human exposure in Ankara, Turkey

One of the impacts of the COVID-19 pandemic is leading people remain at homes longer than ever. Considering the elongation of the time people spend indoors, the potential health risks caused by contaminants including heavy metals in indoor environments have become even more critical. The purpose of this study was to evaluate the levels and sources of heavy metals in indoor dust, to assess the exposure to heavy metals via indoor dust, and to estimate the associated health risk. The highest median value was measured for Zn (263 μg g^-1), while the lowest median concentration value was observed for Cd (0.348 μg g^-1). The levels of elements measured in the current study were found to be within the ranges reported in the other parts of the world, mostly close to the lower end of the range. House characteristics such as proximity to the main street, presence of pets, number of occupants, and age of the building were the house characteristics influencing the observed higher concentrations of certain heavy metals in houses. Enrichment factor values range between 1.79 (Cr) and 20.4 (Zn) with an average EF value of 8.80 ± 6.80 representing that the targeted elements are enriched (EF>2) in indoor dust in Ankara. Positive matrix factorization results showed that the heavy metals in the house dust in the study area are mainly contributed from sources namely outdoor dust, carpets/furniture, solders, wall paint/coal combustion, and cigarette smoke. Carcinogenic and non-carcinogenic risk values from heavy metals did not exceed the safe limits recommended by EPA. The highest carcinogenic risk level was caused by Cr. The risk through ingestion was higher than inhalation, and the risk levels were higher for children than for adults.

Hazardous chemical elements in cleaning cloths, a potential source of microfibres

Although potentially hazardous chemical elements (e.g., Cu, Cr, Pb, Sb, Ti, Zn) have been studied in clothing textiles, their presence in cleaning textiles is unknown. In this study, 48 cleaning cloth products (consisting of 81 individual samples) purchased in Europe, and consisting of synthetic (petroleum-based), semi-synthetic or natural fibres or combinations of these different types, have been analysed for 16 chemical elements by X-ray fluorescence (XRF) spectrometry. Titanium was detected in most cases (median and maximum concentrations ~3700 and 12,400 mg kg^-1, respectively) and Raman microspectroscopy revealed that TiO₂ was present as anatase. Barium, Br, Cr, Cu, Fe and Zn were frequently detected over a range of concentrations, reflecting the presence of various additives, and Sb was present at concentrations up to about 200 mg kg^-1 in samples containing polyester as catalytic residue from the polymerisation process. Lead was detected as a contaminant in four samples and at concentrations below 10 mg kg^-1. Overall, the range of the chemical element profiles and concentrations was similar to those for clothing materials published in the literature, suggesting that broadly the same additives, materials and processes are employed to manufacture cloths and clothing textiles. The mechanisms by which potentially hazardous chemical elements are released into the environment with microfibres or mobilised into soluble or nano-particulate forms remain to be explored.

Occurrence and health implications of heavy metals in preschool children's clothing manufactured in four Asian regions

Clothing may be a potential contributor to body metal burden in children. However, available information on heavy metals in children's clothing is extremely limited and the associated health risks remain poorly understood. This study investigated the concentrations of Pb, Cd, Co, Zn, Cr, As, Cu and Ni in new preschool children's clothing manufactured in four Asian regions. The children's clothing had higher levels of Ni and Cr but lower levels of Pb and Cd in comparison to the concentrations reported in other textile products. The concentrations of Cd were higher in the black clothing than those in the white and color samples. The non-cotton samples contained higher Co concentrations. The Pb concentrations in the samples manufactured in China were significantly higher than those in the other three regions. We estimated the dermal exposure doses for these metals and calculated the associated risks. The results indicated that the health risks from exposure to these metals in the children's clothing were acceptable. However, more research is required to investigate heavy metals and the associated risks in child clothing due to the increasing complexity of their materials and manufacturing processes.

Metal Content in Textile and (Nano)Textile Products

Metals, metallic compounds, and, recently, metallic nanoparticles appear in textiles due to impurities from raw materials, contamination during the manufacturing process, and/or their deliberate addition. However, the presence of lead, cadmium, chromium (VI), arsenic, mercury, and dioctyltin in textile products is regulated in Europe (Regulation 1907/2006). Metal determination in fabrics was performed by inductively coupled plasma-mass spectrometry (ICP-MS) after microwave-assisted acid digestion. The ICP-MS procedure has been successfully validated; relative standard deviations were up to 3% and analytical recoveries were within the 90-107% range. The developed method was applied to several commercial textiles, and special attention has been focused on textiles with nanofinishing (fabrics prepared with metallic nanoparticles for providing certain functionalities). Arsenic content (in textile T4) and lead content (in subsamples T1-1, T1-2, and T3-3) were found to exceed the maximum limits established by the European Regulation 1907/2006. Although impregnation of yarns with mercury compounds is not allowed, mercury was quantified in fabrics T1-2, T5, and T6. Further speciation studies for determining hexavalent chromium species in sample T9 are necessary (hexavalent chromium is the only species of chromium regulated). Some textile products commercialised in Europe included in this study do not comply with European regulation 1907/2006.

Analysis of Single Synthetic Fibers Using a Portable Total Reflection X-ray Fluorescence Spectrometer

In this study, single synthetic fibers obtained from several textile products were analyzed by a portable total reflection X-ray fluorescence spectrometer. Characteristic elements, which would originate from such materials as catalysts, delustering agents, and dyes used for manufacturing synthetic fibers, were detected from single synthetic fiber samples, and the difference in the types of characteristic elements among the single synthetic fiber samples was observed.

Hazardous metal additives in plastics and their environmental impacts

Historically, many additives and catalysts used in plastics were based on compounds of toxic metals (and metalloids), like arsenic, cadmium, chromium(VI), and lead. Despite subsequent restrictions, hazardous additives remain in plastics in societal circulation because of the pervasiveness of many products and the more general contamination of recycled goods. However, little is understood about their presence and impacts in the environment, with most studies focusing on the role of plastics in acquiring metals from their surroundings through, for example, adsorption. Accordingly, this paper provides a review of the uses of hazardous, metal-based additives in plastics, the relevant European regulations that have been introduced to restrict or prohibit usage in various sectors, and the likely environmental impacts of hazardous additives once plastics are lost in nature. Examination of the literature reveals widespread occurrence of hazardous metals in environmental plastics, with impacts ranging from contamination of the waste stream to increasing the density and settling rates of material in aquatic systems. A potential concern from an ecotoxicological perspective is the diffusion of metals from the matrix of micro- and nanoplastics under certain physico-chemical conditions, and especially favorable here are the acidic environments encountered in the digestive tract of many animals (birds, fish, mammals) that inadvertently consume plastics. For instance, in vitro studies have shown that the mobilization of Cd and Pb from historical microplastics can greatly exceed concentrations deemed to be safe according to migration limits specified by the current European Toy Safety Directive (17 mg kg^-1 and 23 mg kg^-1, respectively). When compared with concentrations of metals typically adsorbed to plastics from the environment, the risks from pervasive, historical additives are far more significant.

Effect of Municipal Solid Waste Compost on Antimony Mobility, Phytotoxicity and Bioavailability in Polluted Soils

The effect of a municipal solid waste compost (MSWC), added at 1 and 2% rates, on the mobility, phytotoxicity, and bioavailability of antimony (Sb) was investigated in two soils (SA: acidic soil; SB: alkaline soil), spiked with two Sb concentrations (100 and 1000 mg kg−1). The impact of MSWC on microbial activity and biochemical functioning within the Sb-polluted soils was also considered. MSWC addition reduced water-soluble Sb and favored an increase in residual Sb (e.g., by 1.45- and 1.14-fold in SA-100 and SA-1000 treated with 2% MSWC, respectively). Significant increases in dehydrogenase activity were recorded in both the amended soils, as well as a clear positive effect of MSWC on the metabolic activity and catabolic diversity of respective microbial communities. MSWC alleviated Sb phytotoxicity in triticale plants and decreased Sb uptake by roots. However, increased Sb translocation from roots to shoots was recorded in the amended soils, according to the compost rate. Overall, the results obtained indicated that MSWC, particularly at a 2% rate, can be used for the recovery of Sb-polluted soils. It also emerged that using MSWC in combination with triticale plants can be an option for the remediation of Sb-polluted soils, by means of assisted phytoextraction.