Effect of phospholipid composition on an amphipathic peptide-mediated pore formation in bilayer vesicles

The Functionality of Membrane-Inserting Proteins and Peptides: Curvature Sensing, Generation, and Pore Formation

Proteins and peptides with hydrophobic and amphiphilic segments are responsible for many biological functions. The sensing and generation of membrane curvature are the functions of several protein domains or motifs. While some specific membrane proteins play an essential role in controlling the curvature of distinct intracellular membranes, others participate in various cellular processes such as clathrin-mediated endocytosis, where several proteins sort themselves at the neck of the membrane bud. A few membrane-inserting proteins form nanopores that permeate selective ions and water to cross the membrane. In addition, many natural and synthetic small peptides and protein toxins disrupt the membrane by inducing nonspecific pores in the membrane. The pore formation causes cell death through the uncontrolled exchange between interior and exterior cellular contents. In this article, we discuss the insertion depth and orientation of protein/peptide helices, and their role as a sensor and inducer of membrane curvature as well as a pore former in the membrane. We anticipate that this extensive review will assist biophysicists to gain insight into curvature sensing, generation, and pore formation by membrane insertion.

On the Mechanism of Membrane Permeabilization by Tamoxifen and 4-Hydroxytamoxifen

Tamoxifen (TMX), commonly used in complementary therapy for breast cancer, also displays known effects on the structure and function of biological membranes. This work presents an experimental and simulation study on the permeabilization of model phospholipid membranes by TMX and its derivative 4-hydroxytamoxifen (HTMX). TMX induces rapid and extensive vesicle contents leakage in phosphatidylcholine (PC) liposomes, with the effect of HTMX being much weaker. Fitting of the leakage curves for TMX, yields two rate constants, corresponding to a fast and a slow process, whereas in the case of HTMX, only the slow process takes place. Interestingly, incorporation of phosphatidylglycerol (PG) or phosphatidylethanolamine (PE) protects PC membranes from TMXinduced permeabilization. Fourier-transform infrared spectroscopy (FTIR) shows that, in the presence of TMX there is a shift in the ν_CH2 band frequency, corresponding to an increase in gauche conformers, and a shift in the ν_C=O band frequency, indicating a dehydration of the polar region. A preferential association of TMX with PC, in mixed PC/PE systems, is observed by differential scanning calorimetry. Molecular dynamics (MD) simulations support the experimental results, and provide feasible explanations to the protecting effect of PG and PE. These findings add new information to explain the various mechanisms of the anticancer actions of TMX, not related to the estrogen receptor, and potential side effects of this drug.

Kinetics of pore formation in stearoyl-oleoyl-phosphatidylcholine vesicles by pH sensitive cell penetrating peptide GALA

In order to engineer endosomal escape of drug carrying liposomes into the cytoplasm of target cells, the kinetics of bilayer poration by cell penetrating peptides needs to be well understood. To this end, we have studied pH-dependent pore formation in stearoyl-oleoyl-phosphatidylcholine vesicles as a function of concentration of the peptide GALA. Using laser scanning confocal microscopy, we measured the rate of fluorophore transport from the suspending medium into giant unilamellar vesicles across bilayer pores induced by GALA under acidic pH conditions. We also measured the mean pore size of GALA-induced pores in large unilamellar vesicles by electron microscopy. We fitted a mathematical model of pore formation kinetics to the measured rate of fluorophore transport across the giant vesicle bilayer to estimate the rate of pore formation as a function of GALA concentration. We observed that the number of pores per vesicle and the pore density increased with increasing GALA concentration.

Estimation of pore dimensions in lipid membranes induced by peptides and other biomolecules: A review

The cytoplasmic membrane is one of the most frequent cell targets of antimicrobial peptides (AMPs) and other biomolecules. Understanding the mechanism of action of AMPs at the molecular level is of utmost importance for designing of new membrane-specific molecules. In particular, the formation of pores, the structure and size of these pores are of great interest and require nanoscale resolution approaches, therefore, biophysical strategies are essential to achieve an understanding of these processes at this scale. In the case of membrane active peptides, pore formation or general membrane disruption is usually the last step before cell death, and so, pore size is generally directly associated to pore structure and stability and loss of cellular homeostasis, implicated in overall peptide activity. Up to date, there has not been a critical review discussing the methods that can be used specifically for estimating the pore dimensions induced by membrane active peptides. In this review we discuss the scope, relevance and popularity of the different biophysical techniques such as liposome leakage experiments, advanced microscopy, neutron or X-ray scattering, electrophysiological techniques and molecular dynamics studies, all of them useful for determining pore structure and dimension.

Additional contributions to elastic energy of lipid membranes: Tilt-curvature coupling and curvature gradient

Lipid bilayer membranes under biologically relevant conditions are flexible thin laterally fluid films consisting of two unimolecular layers (monolayers) each about 2 nm thick. On spatial scales much larger than the bilayer thickness, the membrane elasticity is well determined by its shape. The classical Helfrich theory considers the membrane as an elastic two-dimensional (2D) film, which has no particular internal structure. However, various local membrane heterogeneities can result in a lipids tilt relative to the membrane surface normal. On the basis of the classical elasticity theory of 3D bodies, Hamm and Kozlov [Eur. Phys. J. E 3, 323 (2000)10.1007/s101890070003] derived the most general energy functional, taking into account the tilt and lipid monolayer curvature. Recently, Terzi and Deserno [J. Chem. Phys. 147, 084702 (2017)10.1063/1.4990404] showed that Hamm and Kozlov's derivation was incomplete because the tilt-curvature coupling term had been missed. However, the energy functional derived by Terzi and Deserno appeared to be unstable, thereby being invalid for applications that require minimizations of the overall energy of deformations. Here, we derive a stable elastic energy functional, showing that the squared gradient of the curvature was missed in both of these works. This change in the energy functional arises from a more accurate consideration of the transverse shear deformation terms and their influence on the membrane stability. We also consider the influence of the prestress terms on the stability of the energy functional, and we show that it should be considered small and the effective Gaussian curvature should be neglected because of the stability requirements. We further generalize the theory, including the stretching-compressing deformation modes, and we provide the geometrical interpretation of the terms that were previously missed by Hamm and Kozlov. The physical consequences of the new terms are analyzed in the case of a membrane-mediated interaction of two amphipathic peptides located in the same monolayer. We also provide the expression for director fluctuations, comparing it with that obtained by Terzi and Deserno.

Complex Size and Surface Charge Determine Nucleic Acid Transfer by Fusogenic Liposomes

Highly efficient, biocompatible, and fast nucleic acid delivery methods are essential for biomedical applications and research. At present, two main strategies are used to this end. In non-viral transfection liposome- or polymer-based formulations are used to transfer cargo into cells via endocytosis, whereas viral carriers enable direct nucleic acid delivery into the cell cytoplasm. Here, we introduce a new generation of liposomes for nucleic acid delivery, which immediately fuse with the cellular plasma membrane upon contact to transfer the functional nucleic acid directly into the cell cytoplasm. For maximum fusion efficiency combined with high cargo transfer, nucleic acids had to be complexed and partially neutralized before incorporation into fusogenic liposomes. Among the various neutralization agents tested, small, linear, and positively charged polymers yielded the best complex properties. Systematic variation of liposomal composition and nucleic acid complexation identified surface charge as well as particle size as essential parameters for cargo-liposome interaction and subsequent fusion induction. Optimized protocols were tested for the efficient transfer of different kinds of nucleic acids like plasmid DNA, messenger RNA, and short-interfering RNA into various mammalian cells in culture and into primary tissues.

Investigating Polymer Transformation during the Encapsulation of Metal Nanoparticles by Polystyrene-b-poly(acrylic acid) in Colloids

The colloidal self-assembly method holds great potential for large-scale synthesis at low expense of energy as compared to methods that assemble molecules by manipulating building blocks one after another. The development of the colloidal method, however, requires careful and intelligent design of the single building blocks as numerous degrees of freedom like isotropic nanoparticles (NPs) generally form highly repetitive, lattice-like structures or random aggregates upon self-assembly because of their identical surfaces throughout. Specifically, it is an interesting direction that if one can precisely control the localization of surface functionalities (i.e., ligands or polymer shells) on the NPs, a plethora of self-assembled structures (e.g., chains, sheets, rings, twisted, and even staircase structures) would be possible. Despite numerous simulations and modeling for this type of NPs, just a handful literature studies reported the controlling synthesis of metal-polymer patchy NPs through polymer shell shrinking/transformation in colloids. However, there are no detailed control experiments showing the mechanism of this polymer shell shrinking or transformation phenomenon. With the absence of a fundamental understanding of the driving forces and interactions between metal NP surface ligands and the hydrophobic polymer shell domain, simple and efficient design and synthesis of unique metal-polymer hybrid nanostructures are still obscure. Here, we report a detailed mechanistic study on the polymer shell transformation by using different types of surface ligands in encapsulation of metal NPs by polymer shells. The polymer shell transformation dynamic is studied after postheating treatment. The polymer shell transformation/shrinking on the metal NP surface depends on its surface ligand size being applied in the encapsulation step (polymer-ligand hydrophobic interaction effect). Longer-chain ligands provide stronger interactions between NPs and the hydrophobic domain of the polymer shell, which inhibits the polymer shell transformation. In contrast, short-chain ligands lead to weaker interactions, which assist in the polymer shell transformation. By understanding the underlying mechanisms, many new types of NPs, such as metal-polymer core-shell NPs, metal-polymer Janus NPs, silica-metal-polymer hybrid NPs, and silica-metal-polymer flower-like NPs have been synthesized for the first time. A new bottom-up platform for the synthesis of anisotropic NPs with the ability to control the patches in a precise manner has been created, which will benefit both nanotechnology (such as self-assembly in the nanoscale) and applications such as selective detection of the underlying ligands on the metal surface by using a surface-enhanced Raman spectrum study.

Mechanistic Landscape of Membrane-Permeabilizing Peptides

Membrane permeabilizing peptides (MPPs) are as ubiquitous as the lipid bilayer membranes they act upon. Produced by all forms of life, most membrane permeabilizing peptides are used offensively or defensively against the membranes of other organisms. Just as nature has found many uses for them, translational scientists have worked for decades to design or optimize membrane permeabilizing peptides for applications in the laboratory and in the clinic ranging from antibacterial and antiviral therapy and prophylaxis to anticancer therapeutics and drug delivery. Here, we review the field of membrane permeabilizing peptides. We discuss the diversity of their sources and structures, the systems and methods used to measure their activities, and the behaviors that are observed. We discuss the fact that "mechanism" is not a discrete or a static entity for an MPP but rather the result of a heterogeneous and dynamic ensemble of structural states that vary in response to many different experimental conditions. This has led to an almost complete lack of discrete three-dimensional active structures among the thousands of known MPPs and a lack of useful or predictive sequence-structure-function relationship rules. Ultimately, we discuss how it may be more useful to think of membrane permeabilizing peptides mechanisms as broad regions of a mechanistic landscape rather than discrete molecular processes.

Membrane phase characteristics control NA-CATH activity

Our studies presented in this report focus on the behavior of NA-CATH, an α-helical cathelicidin antimicrobial peptide, originally discovered in the Naja atra snake. It has demonstrated high potency against gram-positive and gram-negative bacteria with minimal hemolysis. Here we examine the kinetics, behaviors and potential mechanisms of the peptide in the presence of membrane liposome, modeling Escherichia coli, whose membrane exhibits distinct lipid phases. To understand NA-CATH interactions, the role of lipid phases is critical. We test three different lipid compositions to detangle the effect of phase on NA-CATH's activity using a series of leakage experiments. From these studies, we observe that NA-CATH changes from membrane disruption to pore-based lysing, depending on phases and lipid composition. This behavior also plays a major role in its kinetics.

Role of amphipathicity and hydrophobicity in the balance between hemolysis and peptide-membrane interactions of three related antimicrobial peptides

Cationic antimicrobial peptides (CAMPs) represent important self defense molecules in many organisms, including humans. These peptides have a broad spectrum of activities, killing or neutralizing many Gram-negative and Gram-positive bacteria. The emergence of multidrug resistant microbes has stimulated research on the development of alternative antibiotics. In the search for new antibiotics, cationic antimicrobial peptides (CAMPs) offer a viable alternative to conventional antibiotics, as they physically disrupt the bacterial membranes, leading to lysis of microbial membranes and eventually cell death. In particular, the group of linear α-helical cationic peptides has attracted increasing interest from clinical as well as basic research during the last decade. In this work, we studied the biophysical and microbiological characteristics of three new designed CAMPs. We modified a previously studied CAMP sequence, in order to increase or diminish the hydrophobic face, changing the position of two lysines or replacing three leucines, respectively. These mutations modified the hydrophobic moment of the resulting peptides and allowed us to study the importance of this parameter in the membrane interactions of the peptides. The structural properties of the peptides were also correlated with their membrane-disruptive abilities, antimicrobial activities and hemolysis of human red blood cells.

Delivery of cancer therapeutics to extracellular and intracellular targets: Determinants, barriers, challenges and opportunities

Advances in molecular medicine have led to identification of worthy cellular and molecular targets located in extracellular and intracellular compartments. Effectiveness of cancer therapeutics is limited in part by inadequate delivery and transport in tumor interstitium. Parts I and II of this report give an overview on the kinetic processes in delivering therapeutics to their intended targets, the transport barriers in tumor microenvironment and extracellular matrix (TME/ECM), and the experimental approaches to overcome such barriers. Part III discusses new concepts and findings concerning nanoparticle-biocorona complex, including the effects of TME/ECM. Part IV outlines the challenges in animal-to-human translation of cancer nanotherapeutics. Part V provides an overview of the background, current status, and the roles of TME/ECM in immune checkpoint inhibition therapy, the newest cancer treatment modality. Part VI outlines the development and use of multiscale computational modeling to capture the unavoidable tumor heterogeneities, the multiple nonlinear kinetic processes including interstitial and transvascular transport and interactions between cancer therapeutics and TME/ECM, in order to predict the in vivo tumor spatiokinetics of a therapeutic based on experimental in vitro biointerfacial interaction data. Part VII provides perspectives on translational research using quantitative systems pharmacology approaches.

pH-Dependent membrane lysis by using melittin-inspired designed peptides

Effective acidic pH-selective liposomal membrane lysis was achieved by using a novel designed peptide.

Combined treatment with a pH-sensitive fusogenic peptide and cationic lipids achieves enhanced cytosolic delivery of exosomes

Exosomes, which are approximately 100 nm vesicles secreted by cells, have been studied with respect to cell-to-cell communication, disease diagnosis, and intracellular delivery. The cellular uptake of exosomes occurs by endocytosis; however, the cytosolic release efficiency of encapsulated molecules inside cells is low. To address this issue, here we demonstrate a simple technique for enhancing the cellular uptake and cytosolic release of exosomes by combining a pH-sensitive fusogenic peptide for the fusion of endosomal and exosomal membranes inside cells. This method stimulates the efficient cytosolic release of the exosomal contents with cationic lipids that act as a “glue” to support cellular uptake. Using this simple combined technique, the effective cellular uptake and cytosolic release of an artificially encapsulated dextran macromolecule (70 kDa) in exosomes are achieved, and a marked improvement in bioactivity is attained with the artificially encapsulated ribosome-inactivating protein saporin. Our method will contribute to many biological research fields, including the assessment of the activities of exosomal contents and the development of candidate tools enabling intracellular visualisation and cellular regulation for future therapeutic applications.

Effect of N-terminal truncation on antibacterial activity, cytotoxicity and membrane perturbation activity of Cc-CATH3

A series of amino-terminal truncated analogues of quail antimicrobial peptide Cc-CATH3(1-29) were created and examined antibacterial activity against Gram-positive bacteria, cytotoxicity against mouse fibroblast cell line, and membrane perturbation activity against various membrane models. Parent peptide Cc-CATH3(1-29) and the first four-residue truncated peptide Cc-CATH3(5-29) were active in all tested experiments. In contrast, the eight- and twelve-residue truncated variants Cc-CATH3(9-29) and Cc-CATH3(13-29) appeared to have lost activities. Cc-CATH3(1-29) and Cc-CATH3(5-29) possessed antibacterial activity with minimum inhibitory concentrations of 2-4 and 1-2 µM, respectively. For cytotoxicity, Cc-CATH3(1-29) and Cc-CATH3(5-29) displayed cytotoxicity with the IC50 values of 9.33 and 4.93 μM, respectively. Cc-CATH3(5-29) induced greater liposome membranes disruption than Cc-CATH3(1-29) regardless of lipid type and composition. The leakage results of Cc-CATH3(1-29) share a similar trend with that in Cc-CATH3(5-29); they exhibit no preferential binding to anionic phospholipids. In conclusion, the results suggested that the first four residues at the N-terminus "RVRR" is not essential for presenting all test activities. In contrast, residues five to eight of "FWPL" are necessary as the exclusion of this short motif in Cc-CATH3(9-29) and Cc-CATH3(13-29) leads to a loss of activities. This study will be beneficial for further design and development of Cc-CATH3 to be novel antibiotic.

Capsid protein VP4 of human rhinovirus induces membrane permeability by the formation of a size-selective multimeric pore

Non-enveloped viruses must deliver their viral genome across a cell membrane without the advantage of membrane fusion. The mechanisms used to achieve this remain poorly understood. Human rhinovirus, a frequent cause of the common cold, is a non-enveloped virus of the picornavirus family, which includes other significant pathogens such as poliovirus and foot-and-mouth disease virus. During picornavirus cell entry, the small myristoylated capsid protein VP4 is released from the virus, interacts with the cell membrane and is implicated in the delivery of the viral RNA genome into the cytoplasm to initiate replication. In this study, we have produced recombinant C-terminal histidine-tagged human rhinovirus VP4 and shown it can induce membrane permeability in liposome model membranes. Dextran size-exclusion studies, chemical crosslinking and electron microscopy demonstrated that VP4 forms a multimeric membrane pore, with a channel size consistent with transfer of the single-stranded RNA genome. The membrane permeability induced by recombinant VP4 was influenced by pH and was comparable to permeability induced by infectious virions. These findings present a molecular mechanism for the involvement of VP4 in cell entry and provide a model system which will facilitate exploration of VP4 as a novel antiviral target for the picornavirus family.

Human rhinovirus (HRV) is a non-enveloped virus of the picornavirus family and is responsible for respiratory infections (common colds) costing billions of dollars ($) annually. There remains no vaccine or licensed drug to prevent or reduce infection. Related members of the picornavirus family include significant pathogens such as poliovirus, enterovirus 71 and foot-and-mouth disease virus, for which improved control measures are also required. A fundamental step in virus infection is the delivery of the viral genetic material through the barrier of the cellular membrane. Viruses such as HIV and influenza are enveloped in an outer membrane which can fuse with the host cell membrane to allow the viral genome to penetrate into the cytoplasm. However, non-enveloped viruses such as picornaviruses lack a membrane and the mechanisms for penetration of the membrane by these viruses remain poorly understood. The capsid protein VP4 has previously been implicated in the delivery of the picornavirus genome. In this study we demonstrate that HRV VP4 interacts with membranes to make them permeable by the formation of multimeric, size-selective membrane pores with properties consistent with the transport of viral genome through the membrane. This function of VP4 provides a novel antiviral target for this family of viruses.

Highly efficient macromolecule-sized poration of lipid bilayers by a synthetically evolved peptide

Peptides that self-assemble, at low concentration, into bilayer-spanning pores which allow the passage of macromolecules would be beneficial in multiple areas of biotechnology. However, there are few, if any, natural or designed peptides that have this property. Here we show that the 26-residue peptide "MelP5", a synthetically evolved gain-of-function variant of the bee venom lytic peptide melittin identified in a high-throughput screen for small molecule leakage, enables the passage of macromolecules across bilayers under conditions where melittin and other pore-forming peptides do not. In surface-supported bilayers, MelP5 forms unusually high conductance, equilibrium pores at peptide:lipid ratios as low as 1:25000. The increase in bilayer conductance due to MelP5 is dramatically higher, per peptide, than the increase due to the parent sequence of melittin or other peptide pore formers. Here we also develop two novel assays for macromolecule leakage from vesicles, and we use them to characterize MelP5 pores in bilayers. We show that MelP5 allows the passage of macromolecules across vesicle membranes at peptide:lipid ratios as low as 1:500, and under conditions where neither osmotic lysis nor gross vesicle destabilization occur. The macromolecule-sized, equilibrium pores formed by MelP5 are unique as neither melittin nor other pore-forming peptides release macromolecules significantly under the same conditions. MelP5 thus appears to belong to a novel functional class of peptide that could form the foundation of multiple potential biotechnological applications.

Interaction of two overlapped synthetic peptides from GB virus C with charged mono and bilayers

The physical chemistry properties and interactions of E2 (125-139) and E2 (120-139) peptide sequences from GB virus C with model cell membranes were investigated by means of several biophysical techniques in order to gain better understanding of the effect of peptide length and lipid charge on membrane binding. The peptides, having one net negative charge at the pH of the assays, interacted with monolayers of all the phospholipids regardless of the charge but with more extent with the cationic DPTAP thus indicating that the interaction had both a hydrophobic and an electrostatic component as has been observed for other peptides of the same family. The peptides were able to leakage contents of liposomes and showed fluorescence energy transfer in vesicles depending on the vesicles lipid composition. On another hand, circular dichroism has shown that the peptides exist mainly as a mixture of disordered structure and β-type conformations in aqueous solution but diminished its unstructured content, folding preferentially into α-helical conformation upon interaction with hydrophobic solvents or positively charged lipid surfaces. Altogether, results of this work indicate that the peptides interact at a surface level, penetrate into bilayers composed of fluid lipids and that conformational changes could be responsible for this effect.

Delivery of nanomedicines to extracellular and intracellular compartments of a solid tumor

Advances in molecular medicines have led to identification of promising targets on cellular and molecular levels. These targets are located in extracellular and intracellular compartments. The latter include cytosol, nucleus, mitochondrion, Golgi apparatus and endoplasmic reticulum. This report gives an overview on the barriers to delivering nanomedicines to various target sites within a solid tumor, the experimental approaches to overcome such barriers, and the potential utility of nanotechnology.

Endosome-disruptive peptides for improving cytosolic delivery of bioactive macromolecules

Along with recent advances in therapeutic technologies based on biomacromolecules, including genes, oligonucleotides, and proteins, the development of technologies for improving the efficiency of the delivery of these therapeutic molecules into cells, more specifically into the cytosol and nucleus, is significantly required. Cell membranes are major impediments to the delivery of therapeutic macromolecules into cells. These macromolecules are usually taken up by the cells via endocytosis, and their translocation from endosomes to the cytosol is a critical step to determine their therapeutic effects. Many viruses and bacterial toxins use endocytic pathways to invade the host mammalian cells, and some of these pathogens have the ability to facilitate their endosomal escape into the cytosol by pH-induced alteration in their component proteins that leads to the disruption of the endosomal membranes and the eventual membrane fusions. To simulating these functions, endosome-disruptive peptides have been used for the intracellular delivery of biomacromolecules to accelerate their endosomal escape by sensing the endosomal acidification. In this review, current approaches for the intracellular delivery using these endosome-disruptive peptides are surveyed.

Coupled folding and specific binding: fishing for amphiphilicity

Proteins are uniquely capable of identifying targets with unparalleled selectivity, but, in addition to the precision of the binding phenomenon, nature has the ability to find its targets exceptionally quickly. Transcription factors for instance can bind to a specific sequence of nucleic acids from a soup of similar, but not identical DNA strands, on a timescale of seconds. This is only possible with the enhanced kinetics provided for by a natively disordered structure, where protein folding and binding are cooperative processes. The secondary structures of many proteins are disordered under physiological conditions. Subsequently, the disordered structures fold into ordered structures only when they bind to their specific targets. Induced folding of the protein has two key biological advantages. First, flexible unstructured domains can result in an intrinsic plasticity that allows them to accommodate targets of various size and shape. And, second, the dynamics of this folding process can result in enhanced binding kinetics. Several groups have hypothesized the acceleration of binding kinetics is due to induced folding where a "fly-casting" effect has been shown to break the diffusion-limited rate of binding. This review describes experimental results in rationally designed peptide systems where the folding is coupled to amphiphilicity and biomolecular activity.

Destabilization exerted by peptides derived from the membrane-proximal external region of HIV-1 gp41 in lipid vesicles supporting fluid phase coexistence

The human immunodeficiency virus (HIV) envelope is enriched in cholesterol and sphingomyelin, two lipids that sustain the formation of laterally segregated liquid-ordered fluid domains in model systems. Several evidences indicate that the high lipid order existing at the envelope may play a role in HIV pathogenesis. A putative mechanism might involve the modulation of the membrane-perturbing function of the gp41 membrane-proximal external region (MPER). To test such hypothesis, we investigate here the effect of lipid phase coexistence on the membrane-restructuring properties of NpreTM and CpreTM, two peptides based on the amino- and carboxy-terminal MPER sequences, respectively. Fluid phase coexistence elicited the fusogenic activity of NpreTM at high membrane doses and stimulated "graded" leakage at low doses. By comparison, the effect on CpreTM was restricted to an enhancement of "all-or-none" leakage that was consistent with the promotion of its surface aggregation. Confocal microscopy of single vesicles revealed the preference of both peptides for liquid-disordered domains. Accordingly, we speculate that confinement into envelope fluid nanodomains might boost the distinct capacities of HIV MPER hydrophobic modules for inducing membrane defects during fusion.

Cytosolic targeting of macromolecules using a pH-dependent fusogenic peptide in combination with cationic liposomes

pH-Sensitive peptides and polymers have been employed as additives to enhance the cytosolic delivery of drugs and genes by facilitating their endosomal escape. However, little attention has been paid to the intracellular fate of these peptides and polymers. In this study, we explored the possibility of utilizing GALA, a pH-sensitive fusogenic peptide, as a cytosol-targeting vehicle. In combination with cationic liposomes, Lipofectamine 2000 (LF2000), the feasibility of this approach for the cytosolic targeting of proteins and nanoparticles was exemplified through the delivery of avidin (68 kDa) and streptavidin-coated quantum dots (15-20 nm) in serum-containing medium. The use of cationic liposomes is critical to enhance the cell-surface adhesion of the GALA conjugates and eventual endosomal uptake. Circular dichroism studies suggest that the GALA can be liberated from cationic liposomes at a reducing pH to form a helical structure and this may eventually lead to disruption of the endosomal membrane to achieve an efficient leakage of the GALA conjugates into the cytosol.

Distinct mechanisms of lipid bilayer perturbation induced by peptides derived from the membrane-proximal external region of HIV-1 gp41

The conserved, membrane-proximal external region (MPER) of the human immunodeficiency virus type-1 envelope glycoprotein 41 subunit is required for fusogenic activity. It has been proposed that MPER functions by disrupting the virion membrane. Supporting its critical role in viral entry as a membrane-bound entity, MPER constitutes the target for broadly neutralizing antibodies that have evolved mechanisms to recognize membrane-inserted epitopes. We have analyzed here the molecular mechanisms of membrane permeabilization induced by N-preTM and PreTM-C, two peptides derived from MPER sequences showing a tendency to associate with the bilayer interface or to transfer into the hydrocarbon core, respectively. Both peptides contained the full epitope sequence recognized by the 4E10 monoclonal antibody (MAb4E10), which was subsequently used to probe peptide accessibility from the water phase. Capacities of N-preTM and PreTM-C for associating with vesicles and inducing their permeabilization were comparable. However, MAb4E10 specifically blocked the permeabilization induced by N-preTM but did not appreciably affect that induced by PreTM-C. Supporting the existence of different membrane-bound lytic structures, N-preTM was running as a monomer on SDS-PAGE and induced the graded release of vesicular contents, whereas PreTM-C migrated on SDS-PAGE as dimers and permeabilized vesicles following an all-or-none mechanism, reminiscent of that underlying melittin-induced membrane lysis. These results support the functional segmentation of gp41 membrane regions into hydrophobic subdomains, which might expose neutralizing epitopes and induce membrane-disrupting effects following distinct patterns during the fusion cascade.

Membrane-bound conformation of Naja nigricollis toxin gamma affects its membrane-damaging activity

To address whether the conformational events associated with the absorption of Naja nigricollis toxin gamma on water-lipid interface plays a vital role in its membrane-damaging activity, the present study is carried out. Membrane-damaging activity of toxin gamma on 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC)/1, 2-dimyristoyl-phosphatidic acid (DMPA) vesicles was approximately 13-fold of that on 1, 2-dipalmitoyl-phosphatidylcholine (DPPC)/DMPA vesicles, while the binding affinity of toxin gamma for POPC/DMPA was twofold of that for DPPC/DMPA. Time-resolved fluorescence, acrylamide quenching and Fourier transform infrared spectra showed that POPC/DMPA-bound toxin gamma and DPPC/DMPA-bound toxin gamma did not adopt the same conformation. Moreover, geometrical arrangement of toxin gamma in contact with POPC/DMPA vesicles was different from that with DPPC/DMPA vesicles as evidenced by N-(fluorescein-5-thiocarbamoyl)-1,2-dihexadecanoyl-phosphatidylcholine fluorescence enhancement and cross-linking of membrane-bound toxin gamma. Taken together, our data show that different membrane packing densities arising from phospholipid acyl chain affect membrane-bound conformation of toxin gamma, thus changing its membrane-damaging activity.

The activity of the amphipathic peptide delta-lysin correlates with phospholipid acyl chain structure and bilayer elastic properties

Release of lipid vesicle content induced by the amphipathic peptide delta-lysin was investigated as a function of lipid acyl chain length and degree of unsaturation for a series of phosphatidylcholines. Dye efflux and peptide binding were examined for three homologous lipid series: di-monounsaturated, di-polyunsaturated, and asymmetric phosphatidylcholines, with one saturated and one monounsaturated acyl chain. Except for the third series, peptide activity correlated with the first moment of the lateral pressure profile, which is a function of lipid acyl chain structure. In vesicles composed of asymmetric phosphatidylcholines, peptide binding and dye efflux are enhanced compared to symmetric, unsaturated lipids with similar pressure profiles. We attribute this to the entropically more favorable interaction of delta-lysin with partially saturated phospholipids. We find that lipid acyl chain structure has a major impact on the activity of delta-lysin and is likely to be an important factor contributing to the target specificity of amphipathic peptides.

Interaction of the C-terminal domain of Bcl-2 family proteins with model membranes

Bcl-2 family proteins are involved in the cell homeostasis by regulating programmed cell death. Some of these proteins promote apoptosis, while others inhibit the same process. The C-terminal hydrophobic domain of some of these proteins is predicted to be involved in anchoring them to a variety of cell membranes, such as mitochondrial, endoplasmic reticulum and nuclear membranes. We have used five synthetic peptides imitating the C-terminal domain from both anti-apoptotic (Bcl-2) and pro-apoptotic members (Bak, Bax, and two mutants of this last protein) of this family to study their interaction with model membranes. Some differences were detected in the interaction with these peptides. The addition of all the peptides to large unilamellar vesicles destabilized them and released encapsulated carboxyfluorescein to different degrees, so that fluidity and the increase in negative curvature favoured the extent in the release of carboxyfluorescein. Bcl-2-C and Bax-C peptides produced the highest release levels in most cases, while BaxS184K-C was the least efficient in this respect. These results indicate that these C-terminal domains are able to insert themselves in the membranes, each in a different way that is probably related with their different way which can be related to their differing locations within the cell and their different roles in regulating apoptosis.

The mechanism of cytotoxicity by Naja naja atra cardiotoxin 3 is physically distant from its membrane-damaging effect

In order to dissect out whether multiple activities of cardiotoxins (CTXs) are connected, to some extent, with each other, studies on reduced and S-carboxyamidomethylated (Rcam) Naja naja atra CTX3 were carried out in the present study. Although both CTX3 and Rcam-CTX3 induced apoptotic death of PC-3 cells as evidenced by propodium iodide/annexin V double staining, degradation of procaspases and DNA fragmentation, the cytotoxicity of Rcam-CTX3 was mostly 100-fold lower than that noted with native toxin. However, Rcam-CTX3 retained approximately 38% of the membrane-damaging activity of native toxin as revealed by the decrease in calcein self-quenching from phospholipid vesicles. These results are likely to reflect that the mechanism of cytotoxicity by CTX3 is not heavily dependent on its membrane-perturbing effect, and suggest that the structural elements within CTX3 responsible for the two activities are probably separated.

Structure of a membrane-binding domain from a non-enveloped animal virus: insights into the mechanism of membrane permeability and cellular entry

The gamma(1)-peptide is a 21-residue lipid-binding domain from the non-enveloped Flock House virus (FHV). Unlike enveloped viruses, the entry of non-enveloped viruses into cells is believed to occur without membrane fusion. In this study, we performed NMR experiments to establish the solution structure of a membrane-binding peptide from a small non-enveloped icosahedral virus. The three-dimensional structure of the FHV gamma(1)-domain was determined at pH 6.5 and 4.0 in a hydrophobic environment. The secondary and tertiary structures were evaluated in the context of the capacity of the peptide for permeabilizing membrane vesicles of different lipid composition, as measured by fluorescence assays. At both pH values, the peptide has a kinked structure, similar to the fusion domain from the enveloped viruses. The secondary structure was similar in three different hydrophobic environments as follows: water/trifluoroethanol, SDS, and membrane vesicles of different compositions. The ability of the peptide to induce vesicle leakage was highly dependent on the membrane composition. Although the gamma-peptide shares some structural properties to fusion domains of enveloped viruses, it did not induce membrane fusion. Our results suggest that small protein components such as the gamma-peptide in nodaviruses (such as FHV) and VP4 in picornaviruses have a crucial role in conducting nucleic acids through cellular membranes and that their structures resemble the fusion domains of membrane proteins from enveloped viruses.

Biomembrane-Active Molecular Switches as Tools for Intracellular Drug Delivery

Many therapeutic strategies, such as gene therapy and vaccine development require the delivery of polar macromolecules (e.g. DNA, RNA, and proteins) to intracellular sites at a therapeutic concentration. For such macromolecular therapeutics, cellular membranes constitute a major transport barrier that must be overcome before these drugs can exert their biological activity inside cells. A number of biological organisms, e.g. viruses and toxins, efficiently destabilize the cellular membranes upon a trigger, such as low pH, and facilitate the delivery of their biological cargo to the cytoplasm of host cell. pH-responsive synthetic peptides and polymers have been designed to mimic the function of membrane-destabilizing natural organisms and evaluated as a part of drug delivery systems. In this Review, pH-dependent membrane activity of natural and synthetic systems is reviewed, focussing on fundamental and practical aspects of pH-responsive, membrane-disruptive synthetic polymers in intracellular drug delivery.

Kinetics of dye efflux and lipid flip-flop induced by delta-lysin in phosphatidylcholine vesicles and the mechanism of graded release by amphipathic, alpha-helical peptides

Delta-lysin is a 26-residue, amphipathic, alpha-helical peptide of bacterial origin. Its specificity is to some extent complementary to that of antimicrobial peptides. Therefore, understanding its mechanism is important for the more general goal of understanding the interaction of amphipathic peptides with membranes. In this article, we show that delta-lysin induces graded efflux of the contents of phosphatidylcholine vesicles. In view of this finding, carboxyfluorescein efflux kinetics were re-examined. In addition, peptide-induced lipid flip-flop was directly measured using fluorescence energy transfer between two lipid fluorophores initially placed on opposite leaflets of the bilayer. Carboxyfluorescein efflux and lipid flip-flop occur with essentially identical rate constants. On the basis of a detailed, quantitative analysis of the kinetics of peptide-vesicle interactions, we conclude that the peptide translocates across the bilayer as a small, transient aggregate, most likely a trimer. Dye efflux and lipid flip-flop occur concomitantly with the transient peptide-induced perturbation of the membrane. The experimental data are interpreted by comparing the predictions of the available models for the mechanism of action of amphipathic alpha-helical peptides. We demonstrate how the combination of the quantitative kinetic analysis, graded efflux, and reversibility of the peptide-vesicle interaction can be used to reject several models for this particular peptide. Two models are compatible with the data, the toroidal pore model and the sinking raft model. On the basis of the small aggregate size, a trimer, the latter appears to be more plausible. Some significant modifications are introduced in the sinking raft model to take into account the new finding of graded dye release. Furthermore, we present an explanation for the phenomenon of graded release in general, which, contrary to all-or-none efflux, has not been well-understood.

tBid forms a pore in the liposome membrane

We investigated the ability of tBid (truncated form of Bid) to bind and permeabilize the liposomes (large unilamellar vesicles, LUVs) and release fluorescent marker molecules (fluorescein-isothiocyanate-conjugated dextrans, FITC-dextrans) of various molecular diameters (FD-20, FD-70, FD-250S) from LUVs. Obtained data showed that tBid was more efficient in promoting leakage of FITC-dextrans from LUVs composed of cardiolipin and dioleoylphosphatidylcholine (DOPC) than LUVs made of dioleoylphosphatidic acid or dioleoylphosphatidylglycerol and DOPC. The leakage efficiency was reduced with increasing amount of dioleoylphosphatidylethanolamine or dielaidoylphosphatidylethanolamine. Phospholipid monolayer assay and fluorescence quenching measurements revealed that tBid inserted deeply into the hydrophobic acyl chain of acidic phospholipids. Taking into account the tBid three-dimensional structure, we propose that tBid could penetrate into the hydrophobic core of membrane, resulting in the leakage of entrapped content from LUVs via a pore-forming mechanism.

Design strategies to improve soluble macromolecular delivery constructs

Macromolecular therapeutics provide numerous benefits for the delivery of cytotoxic or poorly soluble drugs in vivo. However, these constructs often encounter barriers for drug delivery on both the systemic and subcellular level. Many soluble polymer carriers have been designed to surmount specific physiological barriers individually, but less work has been dedicated to designing an all-encompassing construct that addresses multiple therapeutic barriers at once. Incorporation of multiple agents already individually known to increase effectiveness into one carrier could further improve current drug delivery technology. Recent developments in subcellular delivery of therapeutic agents in soluble macromolecular carriers are discussed in the context of the future possibility for the design of an all-encompassing soluble multi-functional drug delivery vehicle.

Viroporin-mediated membrane permeabilization. Pore formation by nonstructural poliovirus 2B protein

Enterovirus nonstructural 2B protein is involved in cell membrane permeabilization during late viral infection. Here we analyze the pore forming activity of poliovirus 2B and several of its variants. Solubilization of 2B protein was achieved by generating a fusion protein comprised of poliovirus 2B attached to a maltose-binding protein (MBP) as an N-terminal solubilization partner. MBP-2B was assayed using large unilamellar vesicles as target membranes. This fusion protein was able to assemble into discrete structures that disrupted the permeability barrier of vesicles composed of anionic phospholipids. The transbilayer aqueous connections generated by MBP-2B were stable over time, allowing the passage of solutes of molecular mass under 1,000 Da. Oligomerization was investigated using fluorescence resonance energy transfer. Our data indicate that MBP-2B aggregation occurs at the membrane surface. Moreover, MBP-2B binding to membranes promoted the formation of SDS-resistant tetramers. We conclude that MBP-2B forms oligomers capable of generating a tetrameric aqueous pore in lipid bilayers. These findings are the first evidence of viroporin activity shown by a protein from a naked animal virus.

Mechanism and kinetics of delta-lysin interaction with phospholipid vesicles

Delta-lysin is a 26 amino acid, hemolytic peptide toxin secreted by Staphylococcus aureus. It has been reported to form an amphipathic helix upon binding to lipid bilayers and is often cited as a typical example of the barrel-stave model for pore formation in lipid bilayer membranes. However, the exact mechanism by which it lyses cells and the physical basis of its target specificity are still unknown. Moreover, the evidence for delta-lysin insertion and pore formation in the membrane stems largely from theoretical modeling of the toxin and lacks experimental confirmation. We investigated binding and insertion of delta-lysin into phospholipid bilayer vesicles. The kinetics of these processes were studied by stopped-flow fluorescence with two types of experiments: (a) carboxyfluorescein release from the vesicles upon peptide-vesicle interaction, with concomitant relief of dye self-quenching; (b) fluorescence energy transfer from the intrinsic tryptophan of the peptide to a membrane-bound lipid probe. We formulated a detailed kinetic mechanism with explicit molecular rate constants for peptide binding, association, and insertion, obtaining a quantitative description of the experimental results. delta-Lysin insertion is strongly dependent on the peptide-to-lipid ratio, suggesting that association of a critical number of monomers on the membrane is required for activity. However, we found no evidence for a stable membrane-inserted pore. Rather, the peptide appears to cross the membrane rapidly and reversibly and cause release of the lipid vesicle contents in this process.

Sphingomyelin and cholesterol promote HIV-1 gp41 pretransmembrane sequence surface aggregation and membrane restructuring

The interfacial sequence DKWASLWNWFNITNWLWYIK, preceding the transmembrane anchor of gp41 glycoprotein subunit, has been shown to be essential for fusion activity and incorporation into virions. HIV(c), a peptide representing this region, formed lytic pores in liposomes composed of the main lipids occurring in the human immunodeficiency virus, type 1 (HIV-1), envelope, i.e. 1-palmitoyl-2-oleoylphosphatidylcholine (POPC):sphingomyelin (SPM):cholesterol (Chol) (1:1:1 mole ratio), at low (>1:10,000) peptide-to-lipid mole ratio, and promoted the mixing of vesicular lipids at >1:1000 peptide-to-lipid mole ratios. Inclusion of SPM or Chol in POPC membranes had different effects. Whereas SPM sustained pore formation, Chol promoted fusion activity. Even if partitioning into membranes was not affected in the absence of both SPM and Chol, HIV(c) had virtually no effect on POPC vesicles. Conditions described to disturb occurrence of lateral separation of phases in these systems reproduced the high peptide-dose requirements for leakage as found in pure POPC vesicles and inhibited fusion. Surface aggregation assays using rhodamine-labeled peptides demonstrated that SPM and Chol promoted HIV(c) self-aggregation in membranes. Employing head-group fluorescent phospholipid analogs in planar supported lipid layers, we were able to discern HIV(c) clusters associated to ordered domains. Our results support the notion that the pretransmembrane sequence may participate in the clustering of gp41 monomers within the HIV-1 envelope, and in bilayer architecture destabilization at the loci of fusion.

A Monte Carlo study of peptide insertion into lipid bilayers: equilibrium conformations and insertion mechanisms

The membrane insertion behavior of two peptides, Magainin2 and M2 delta, was investigated by applying the Monte Carlo simulation technique to a theoretical model. The model included many novel aspects, such as a new semi-empirical lipid bilayer model and a new set of semi-empirical transfer energies, which reproduced the experimental insertion behavior of Magainin2 and M2 delta without parameter fitting. Additionally, we have taken into account diminished internal (intramolecular) hydrogen bonding at the N- and C-termini of helical peptides. All simulations were carried out at 305 K, above the membrane thermal phase transition temperature, and at pH 7.0. The peptide equilibrium conformations are discussed for a range of bilayers with tail polarities varying from octanol-like to alkane-like. Probability distributions of the individual amino-acid-residue positions show the dynamic nature of these equilibrium conformations. Two different insertion mechanisms for M2 delta, and a translocation mechanism for Magainin2, are described. A study of the effect of bilayer thickness on M2 delta insertion suggests a critical thickness above which insertion is unfavorable. Additionally, we did not need to use an orientational potential or array of hard cylinders to persuade M2 delta to insert perpendicular to the membrane surface. Instead, we found that diminished internal hydrogen bonding in the helical conformation anchored the termini in the headgroups and resulted in a nearly perpendicular orientation.

Leakage and aggregation of phospholipid vesicles induced by the BH3-only Bcl-2 family member, BID

BID is a BH3 domain-only member of the Bcl-2 family that acts as an apoptotic agonist in programmed cell death. After cleavage by caspase-8, the N-terminal of BID (N-BID) stays in the cytosol while the C-terminal of BID (C-BID) translocates to mitochondria, leading to cytochrome c release in vivo and in vitro. We have previously reported that BID or truncated BID (tBID) can induce the release of entrapped trypsin and cytochrome c from large unilamellar vesicles (LUVs). Further studies have been performed and are presented here; the results demonstrate that C-BID, like BID and tBID, induces vesicle leakage, whereas N-BID or the BID mutants BID (D59A) and BID (G94E) fail to have any significant effects. The affinity of the above-mentioned proteins for soybean phospholipid LUVs (SLUVs) decreased in an order similar to their leakage-inducing capability: tBID > BID > BID (D59A), while N-BID and BID (G94E) were unable to bind to the vesicles at all. BID-induced leakage was dependent on the lipid composition of vesicles. Acidic phospholipid (e.g. phosphatidic acid or phosphatidylglycerol) was necessary for BID-induced leakage while the presence of phosphatidylethanolamine or cholesterol reduced the leakage. It was also found C-BID is better able to penetrate the soybean phospholipid monolayer than BID or tBID. A further finding was that tBID, but not full-length BID, could stimulate the aggregation of SLUVs. Finally, Bcl-x(L), an apoptotic antagonist in programmed cell death, can prevent the aggregation of LUVs induced by tBID, but not the release of entrapped trypsin. It is postulated that two separate domains of tBID are responsible for inducing leakage and aggregation of phospholipid vesicles.